بر اساس عنوان

1
Laser ablation method: use of surfactants to form the dispersed Ag nanoparticles
2
Laser ablation methods for analysis of urinary calculi: Comparison study based on calibration pellets
3
Laser ablation methods for analysis of urinary calculi: Comparison study based on calibration pellets
4
Laser Ablation Molecular Isotopic Spectrometry
5
Laser Ablation Molecular Isotopic Spectrometry
6
Laser ablation molecular isotopic spectrometry of water for 1D2/1H1 ratio analysis
7
Laser Ablation Molecular Isotopic Spectrometry: Parameter influence on boron isotope measurements
8
Laser Ablation Molecular Isotopic Spectrometry: Parameter influence on boron isotope measurements
9
Laser Ablation Molecular Isotopic Spectrometry: Strontium and its isotopes
10
Laser ablation multicollector ICPMS determination of δ11B in geological samples
11
Laser ablation of a B4C–polysiloxane composite
12
Laser ablation of a Pb(ZrxTi1ÿx)O3 target in a pulsed oxygen jet
13
Laser ablation of a thin carbon layer deposited on a polymer substrate by Nd:YAG laser
14
Laser ablation of advanced ceramics and glass-ceramic materials: Reference position dependence
15
Laser ablation of Al2O3–TiC: a spectroscopic investigation
16
Laser ablation of alumina in water
17
Laser ablation of aluminosilicates: Comparison between allophane and mixed alumina/silicas by Fourier Transform-Ion Cyclotron Resonance-Mass Spectrometry
18
Laser ablation of aryltriazene photopolymer films: Effects of polymer structure on ablation properties
19
Laser ablation of AsxSe100−x chalcogenide glasses: Plume investigations
20
Laser ablation of BiSrCaCuO superconducting thin film: analysis of intermediate species in real time
21
Laser ablation of carbon clusters in high charge states
22
Laser ablation of ceramic oxides in the presence of a RF pulsed oxygen plasma
23
Laser ablation of cobalt and cobalt oxides in liquids: influence of solvent on composition of prepared nanoparticles
24
Laser ablation of conjugated polymers
25
Laser ablation of CsI analyzed by delayed extraction
26
Laser ablation of diamond nanoparticles suspended in solvent: synthesis of polyynes
27
Laser ablation of diamond particles suspended in ethanol: Effective formation of long polyynes Original Research Article
28
Laser ablation of Ga in dielectric breakdown of gaseous hydrocarbons: deposition of ambient-pressure unstable Ga nanophases in carbonaceous environment
29
Laser ablation of gold in chloroform solutions of cetyltrimethylammoniumbromide
30
Laser ablation of highly oriented CdSe thin films and CdSeCdTe multilayers on silicon substrates
31
Laser ablation of metals and ceramics in picosecond–nanosecond pulsewidth in the presence of different ambient atmospheres
32
Laser ablation of metals by femtosecond pulses: Theoretical and experimental study
33
Laser ablation of metals: Analysis of surface-heating and plume-expansion experiments
34
Laser ablation of metals: the transition from non-thermal processes to thermal evaporation
35
Laser ablation of multilayered hot stamping foil
36
Laser ablation of multilayers of ink from a paper substrate for tactile printing
37
Laser ablation of Ni by ultrashort pulses: molecular dynamics simulation
38
Laser ablation of oxides: study of the oxygen incorporation by 18O isotopic tracing techniques
39
Laser ablation of polished and nanostructured titanium surfaces by nanosecond laser pulses
40
Laser ablation of polymer-based silver nanocomposites
41
Laser ablation of polymers studied by ns-interferometry and ns-shadowgraphy measurements
42
Laser ablation of powdered samples and analysis by means of laser-induced breakdown spectroscopy
43
Laser ablation of refractory material, cluster formation and deposition
44
Laser ablation of ring-strained precursor molecules: selective product fragment generation
45
Laser ablation of sodium nitrate: NO desorption following excitation of the π-π∗ band of the nitrate anion
46
Laser ablation of thin tungsten layers deposited on carbon substrate
47
Laser ablation of toluene liquid for surface micro-structuring of silica glass
48
Laser ablation of UHMWPE-polyethylene by 438 nm high energy pulsed laser
49
Laser ablation of Upilex-S polyimide: influence of laser wavelength on chemical structure and composition in both ablated area and halo
50
Laser ablation of yttrium-containing oxides in various ambient gases studied by time-resolved emission spectroscopy
51
Laser ablation particle beam glow discharge time of flight mass spectrometry for the analysis of halogenated polymers and inorganic solid material
52
Laser ablation particle beam glow discharge time of flight mass spectrometry for the analysis of halogenated polymers and inorganic solid material
53
Laser ablation plume thermalization dynamics in background gases: combined imaging, optical absorption and emission spectroscopy, and ion probe measurements
54
Laser ablation processes investigated using inductively coupled plasma–atomic emission spectroscopy ICP–AES/
55
Laser ablation rate of hydroxylapatite in different atmospheres
56
Laser ablation single-collector inductively coupled plasma mass spectrometry for lead isotopic analysis to investigate evolution of the Bilbilis mint Original Research Article
57
Laser ablation synthesis of Al-based icosahedral powders
58
Laser ablation synthesis of Al-based icosahedral powders
59
Laser ablation synthesis of indium oxide nanoparticles in water
60
Laser ablation synthesis of monodispersed magnetic alloy nanoparticles
61
Laser ablation synthesis of phosphorus clusters
62
Laser ablation tests performed on TORE-SUPRA graphite samples
63
Laser ablation time-of-flight mass spectrometry (LA-TOF-MS) of “nitrogen doped diamond-like carbon (DLN) nano-layers” Original Research Article
64
Laser ablation U-series analysis of fossil bones and teeth
65
Laser ablation using a long-pulsed, high-fluence, CW single-mode fiber laser
66
Laser ablation with short and ultrashort laser pulses: Basic mechanisms from molecular-dynamics simulations
67
Laser ablation/ionization mass spectrometry on tokamak deposition probes
68
Laser ablation-based synthesis of functionalized colloidal nanomaterials in biocompatible solutions
69
Laser ablation-molecular beam method: a simple and versatile diagnosis to study chemistry of monopositive metal ions in the gas phase
70
Laser Absorbency of Samarium Borate Prepared by Solid-State Reaction
71
Laser acceleration of electrons and ions and intense secondary particle generation
72
Laser Acceleration of Electrons in Magnetized Collisionless Plasma
73
Laser acceleration of low emittance, high energy ions and applications
74
Laser accelerator developments for future high-energy accelerators
75
Laser accelerator developments for future high-energy accelerators
76
Laser acoustic emission thermal technique (LAETT): A technique for generating acoustic emission in dental composites
77
Laser action and gain and attenuation properties of the 1D photonic crystal structure with active and passive layers
78
Laser action and upconversion of Nd3+ in tellurite bulk glass
79
Laser Action from Two Dipyrrinone Dyes Under Flash-Lamp Pumping
80
Laser action in an optically pumped carbon monoxide plasma
81
Laser action in neodymium-doped zinc chloride borophosphate glasses
82
Laser action in praseodymium doped zinc chloride borophosphate glasses
83
Laser action of doo-ppv and rhodamine 590; a comparison
84
Laser Activated Voltammetry: Mass Transport, Surface Effects and Analytical Applications
85
Laser Activated Voltammetry: Mass Transport, Surface Effects and Analytical Applications
86
Laser activation of Ultra Shallow Junctions (USJ) doped by Plasma Immersion Ion Implantation (PIII)
87
Laser activation-modification of semiconductor surfaces (LAMSS) of 1-alkenes on silicon: A ToF-SIMS, chemometrics, and AFM analysis
88
Laser acupuncture for depression: A randomised double blind controlled trial using low intensity laser intervention
89
Laser Acupuncture Therapy Added to Inspiratory Muscle Training and Aerobic Exercise Training Improves Small Airway Ventilation in Metal Arc Welders
90
Laser Acupuncture Therapy Added to Inspiratory Muscle Training and Postural Drainage Improves Treatment of Children with Bronchopneumonia
91
Laser Acupuncture: 35 Years of Successful Application in Russia (Narrative Review)
92
Laser Aided Ceramic Restoration Removal: A Comprehensive Review
93
Laser aided direct metal deposition of Inconel 625 superalloy: Microstructural evolution and thermal stability
94
Laser Alloyed Coatings of TiB2/Graphite on 9Cr18 Stainless Steel Surface Original Research Article
95
Laser alloying and cladding for improving surface properties
96
Laser alloying of aluminium with electrodeposited nickel: optimisation of plating thickness and processing parameters
97
Laser altimeter canopy height profiles: methods and validation for closed-canopy, broadleaf forests
98
Laser altimeter return pulse correlation: a method for detecting surface topographic change
99
Laser analyses of mixture formation and the influence of solute on particle precipitation in the SAS process
100
Laser and absorption saturation measurements of Cr4+ crystals, pumped by broadband pulsed 940 nm radiation
101
Laser and alpha particle characterization of floating-base BJT detector
102
Laser and alpha particle characterization of floating-base BJT detector
103
Laser and beta source setup characterization of 3D-DDTC detectors fabricated at FBK-irst
104
Laser and beta source setup characterization of 3D-DDTC detectors fabricated at FBK-irst
105
Laser and chemical cleaning tests for the conservation of the Porta del Paradiso by Lorenzo Ghiberti
106
Laser and electron beam alloying of Al with Fe and Sn
107
Laser and forming technology—an idea and the way of implementation
108
Laser and nitrogen plasma beam induced modifications in amorphous silicon thin films
109
Laser and photodynamic therapy in the management of cutaneous malignancies
110
Laser and plasma nitriding of titanium using CW-CO2 laser in the atmosphere
111
Laser and resistance joining of aluminum–graphite composite
112
Laser and shot peening effects on fatigue crack growth in friction stir welded 7075-T7351 aluminum alloy joints
113
Laser and Solar Light-Induced Degradation of Pollutant Dyes Using Bi-Plasmonic Ag-Au Nanoparticles-Decorated Magnetic TiO2 for Textile Wastewater Treatment
114
Laser- and UV-assisted modification of polystyrene surfaces for control of protein adsorption and cell adhesion
115
Laser and β-NMR spectroscopy on neutron-rich magnesium isotopes
116
Laser angioplasty of restenosed coronary stents: results of multicenter surveillance trial
117
Laser annealing effect of giant magneto-impedance in amorphous Co66Fe4Nib14Si15 ribbon
118
Laser annealing effect of giant magneto-impedance in amorphous Co66Fe4Nib14Si15 ribbon
119
Laser annealing effects on the structural, optical and magnetic properties of sputtered Zn0.95Co0.05O thin film
120
Laser annealing in combination with mass spectroscopy, a technique to study deuterium on tokamak carbon samples, a tool for detritiation
121
Laser annealing of Al implanted silicon carbide: Structural and optical characterization
122
Laser annealing of amorphous carbon films
123
Laser annealing of amorphous NiTi shape memory alloy thin films to locally induce shape memory properties
124
Laser annealing of amorphous NiTi shape memory alloy thin films to locally induce shape memory properties Original Research Article
125
Laser annealing of bimetal thin films: A route of fabrication of composite nanostructures
126
Laser annealing of BST thin films with reduced cracking at an elevated temperature
127
Laser annealing of Nb coatings for superconducting RF accelerating cavities
128
Laser annealing of SiOx thin films
129
Laser annealing of the Si layers in Si/SiO2 multiple quantum wells
130
Laser annealing of zinc oxide thin film deposited by spray-CVD
131
Laser annealing of zinc oxide thin film deposited by spray-CVD
132
Laser annealing study of PECVD deposited hydrogenated amorphous silicon carbon alloy films
133
Laser Application in Iran Urology: A Narrative Review
134
Laser Application in Periodontics
135
Laser Application in Prevention of Demineralization in Orthodontic Treatment
136
Laser application in the current profile control and pressure distribution in tokamaks and stellarators
137
Laser applications in microtechnology
138
Laser applications in oral and maxillofacial surgery
139
Laser Applications in Orthodontics
140
Laser applications to chemical and environmental analysis: introduction
141
Laser Applications to Chemical and Environmental Analysis: Introduction to the Feature Issue
142
Laser assisted aluminum foaming
143
Laser assisted atom probe analysis of thin film on insulating substrate
144
Laser assisted atom probe analysis of thin film on insulating substrate
145
Laser assisted bound-free transition of a polaron bound to an impurity center Original Research Article
146
Laser assisted chemical vapor deposition synthesis of carbon nanotubes and their characterization Original Research Article
147
Laser assisted chemical vapour deposition of hydrogen containing amorphous carbon at room temperature
148
Laser assisted decontamination of metal surface: Evidence of increased surface absorptivity due to field enhancement caused by transparent/semi-transparent contaminant particulates
149
Laser assisted deposition of supramolecular organizates on solid surfaces
150
Laser assisted embedding of nanoparticles into metallic materials
151
Laser assisted fabrication of random rough surfaces for optoelectronics
152
Laser assisted field evaporation of oxides in atom probe analysis
153
Laser assisted field evaporation of oxides in atom probe analysis
154
Laser assisted glass frit sealing of dye-sensitized solar cells
155
Laser Assisted Incremental Forming: Formability and Accuracy Improvement
156
Laser assisted micro-milling of hard-to-machine materials
157
Laser assisted modification and chemical metallization of electron-beam deposited ceria thin films
158
Laser assisted particle removal ‘dry’ cleaning of critical surfaces
159
Laser assisted particle removal ‘dry’ cleaning of critical surfaces
160
Laser assisted removal of synthetic painting-conservation materials using UV radiation of ns and fs pulse duration: Morphological studies on model samples
161
Laser assisted resonance energy transfer
162
Laser assisted surface microstructuring of Me/ZrO2 bilayered thin film system
163
laser assisted surgical and orthodontic treatment of a dilacerated impacted maxillary incisor: a case report
164
Laser assisted thermoluminescence dosimetry using temperature controlled linear heating
165
Laser assisted topical ‘biofilm’ chemoprevention of oral cancer
166
Laser Assisted Turbinate Reduction (LATR) Comparative Study
167
Laser assisted turning of Titanium Metal Matrix Composite
168
Laser assisted zona hatching does not improve live birth rate in patients undergoing their first ICSI cycles
169
Laser balloon angioplasty combined with local intracoronary heparin therapy: Immediate and short-term follow-up results, ,
170
Laser based coating and modification of carbon fibres: application of industrial lasers to manufacturing of composite materials
171
Laser based etching technique for metallography and ceramography
172
Laser based etching technique for metallography and ceramography
173
Laser based etching technique for metallography and ceramography
174
Laser beam application to thin film transistors
175
Laser Beam Backside Probing of CMOS Integrated Circuits
176
Laser Beam Backside Probing of CMOS Integrated Circuits
177
Laser beam induced current measurements of Cd1−xZnxS/CdTe solar cells
178
Laser beam machining (LBM), state of the art and new opportunities
179
Laser beam profile modulation for microstructure control in laser cladding of an NiCrBSi alloy
180
Laser beam propagation in multiply scattering droplet aerosols — comparison of theoretical models and experimental data
181
Laser beam shape and curvature radius of the laser wavefront passing through ZnO nanostructures
182
Laser beam studies of RPC behaviour in avalanche mode
183
Laser beam studies of RPC behaviour in avalanche mode
184
Laser beam surface hardening of CVD TiN-coated steels
185
Laser beam weld microstructures in directionally solidified alloy IC 6
186
Laser beam welding hard metals to steel
187
Laser beam welding of an Oxide Dispersion Strengthened super alloy
188
Laser beam welding of dissimilar stainless steels in a fillet joint configuration
189
Laser beam weld-metal microstructure in a yttrium modified directionally solidified Ni3Al-base alloy
190
Laser beam-induced dynamic gratings in α-quartz
191
Laser beams resonant interaction with micro-droplets which have a controlled content
192
Laser bending of an Al6013/SiCp aluminium matrix composite sheet
193
Laser biostimulation of cartilage: in vitro evaluation
194
Laser block length distribution and influence of its parameters (K and M) on the phase behavior of statistical multiblock copolymers
195
Laser boronising of Ti–6Al–4V as a result of laser alloying with pre-placed BN
196
Laser boronising of Ti–6Al–4V as a result of laser alloying with pre-placed BN
197
Laser brazing of a steel/aluminium assembly with hot filler wire (88% Al, 12% Si)
198
Laser brazing of aluminium
199
Laser breakdown in alcohols and water induced by λ = 1064 nm nanosecond pulses
200
Laser burning of a gap in the spectrum of plasmon resonance of gold nanoparticles
201
Laser calibration system for the CERES Time Projection Chamber
202
Laser calibration system for the CERES Time Projection Chamber
203
Laser capture microdissection and mRNA characterization of mouse airway epithelium: methodological considerations
204
Laser catalysis of acrylonitrile on copper surfaces
205
Laser Challenges for Fast Ignition
206
Laser characterisation of a 3D single-type column p-type prototype module read out with ATLAS SCT electronics
207
Laser characteristics of a new crystal Nd:Sr5(PO4)3F at 1.059 μm
208
Laser characteristics of Cr:Nd:GdCOB self-frequency-doubling crystal
209
Laser characterization and cleaning of 19th century daguerreotypes II
210
Laser characterization and cleaning of nineteenth century daguerreotypes
211
Laser chemical etching of Cu2O
212
Laser chemical vapor deposition of single-crystalline transparent CeO2 films
213
Laser chemical vapor deposition of thin films
214
Laser chemical vapor deposition of thin films
215
Laser chemical vapor deposition of titanium nitride films with tetrakis (diethylamido) titanium and ammonia system
216
Laser chemical vapour deposition for microelectronics
217
Laser clad surfaces for shark-skin effect by high-temperature activation
218
Laser clad TiC reinforced NiCrBSi composite coatings on Ti–6Al–4V alloy using a CW CO2 laser
219
Laser cladding and erosive wear of Co–Mo–Cr–Si coatings
220
Laser cladding and laser assisted direct manufacturing
221
Laser cladding Co-based alloy/SiCp composite coatings on IF steel
222
Laser cladding in-situ carbide particle reinforced Fe-based composite coatings with rare earth oxide addition
223
Laser cladding in-situ NbC particle reinforced Fe-based composite coatings with rare earth oxide addition
224
Laser cladding of a featureless iron-based alloy
225
Laser cladding of aerospace materials
226
Laser cladding of Al2O3 coating on aluminium alloy by thermite reactions
227
Laser cladding of aluminium on AISI 304 stainless steel with high-power diode lasers
228
Laser cladding of austenitic stainless steel using NiTi strips for resisting cavitation erosion
229
Laser cladding of bioactive glass coatings
230
Laser cladding of Co-based alloy/TiC/CaF2 self-lubricating composite coatings on copper for continuous casting mold
231
Laser cladding of Co-based superalloy coatings: Comparative study between Nd:YAG laser and fibre laser
232
Laser cladding of Colmonoy 6 powder on AISI316L austenitic stainless steel Original Research Article
233
Laser cladding of copper with molybdenum for wear resistance enhancement in electrical contacts
234
Laser cladding of eutectic-based Ti–Ni–Al alloy coating on magnesium surface
235
Laser cladding of in situ TiB2/Fe composite coating on steel
236
Laser cladding of MMC coatings on aluminium substrate: influence of composition and microstructure on mechanical properties
237
Laser cladding of Ni/Cu/Al functionally graded coating on magnesium substrate
238
Laser cladding of Ni-base composite coatings onto Ti–6Al–4V substrates with pre-placed B4C + NiCrBSi powders
239
Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate
240
Laser cladding of quasicrystal forming Al–Cu–Fe on aluminum
241
Laser cladding of SiC reinforced Zr65Al7.5Ni10Cu17.5 amorphous coating on magnesium substrate
242
Laser cladding of SiC/Si composite coating on Si–SiC ceramic substrates
243
Laser cladding of stainless steel with Ni–Cr3C2 and Ni–WC for improving erosive–corrosive wear performance
244
Laser cladding of stainless steel with Ni–Cr3C2 for improved wear performance
245
Laser cladding of Stellite 6 on stainless steel to enhance solid particle erosion and cavitation resistance
246
Laser cladding of Ti-6Al-4V alloy with TiC and TiC+NiCrBSi powders
247
Laser cladding of tungsten carbides (Spherotene®) hardfacing alloys for the mining and mineral industry
248
Laser cladding of turbine blades
249
Laser cladding of yttria partially stabilized ZrO2 (YPSZ) ceramic coatings on aluminum alloys
250
Laser cladding technology to small diameter pipes
251
Laser cladding technology to small diameter pipes Original Research Article
252
Laser cleaning and dressing of vitrified grinding wheels
253
Laser cleaning applied in the restoration of a medieval wooden panel chamber at Pirna
254
Laser cleaning as a part of the restoration process: removal of aged oil paints from a Renaissance sandstone portal in Dresden, Germany
255
LASER CLEANING IN ART CONSERVATION by Rui Bordalo Part I: Laser Fundamentals
256
Laser cleaning in art restoration
257
Laser cleaning in French museums: towards instating a methodology
258
Laser cleaning methodologies for stone façades and monuments: laboratory analyses on lithotypes of Siena architecture
259
Laser cleaning methodology for the preservation of the Porta del Paradiso by Lorenzo Ghiberti
260
Laser cleaning of 19th century Congo rattan mats
261
Laser cleaning of a bronze bell
262
Laser cleaning of ablation debris from CO -laser-etched vias in 2 polyimide
263
Laser cleaning of ancient textiles
264
Laser cleaning of fossil vertebrates: a preliminary report
265
Laser cleaning of gilded wood: A comparative study of colour variations induced by irradiation at different wavelengths
266
Laser cleaning of inorganic encrustation on excavated objects: evaluation of the cleaning result by means of multi-spectral imaging
267
Laser cleaning of paper using Nd:YAG laser running at 532 nm
268
Laser cleaning of parchment: structural, thermal and biochemical studies into the effect of wavelength and fluence
269
Laser cleaning of particulates from paper: Comparison between sized ground wood cellulose and pure cellulose
270
Laser cleaning of Prestige tanker oil spill on coastal rocks controlled by spectrochemical analysis
271
Laser cleaning of Prestige tanker oil spill on coastal rocks controlled by spectrochemical analysis Original Research Article
272
Laser cleaning of printed circuit boards
273
Laser cleaning of pulsed laser deposited rhodium films for fusion diagnostic mirrors
274
Laser cleaning of silicon surface with deposition of different liquid films
275
Laser cleaning of stained glass windows – Final results of a research project
276
Laser cleaning of stained glass windows. Overview on an interdisciplinary project
277
Laser cleaning of stone artefacts: a substitute or alternative method?
278
Laser cleaning of surface contaminants
279
Laser cleaning of tarnished silver and copper threads in museum textiles
280
Laser cleaning of terracotta decorations of the portal of Palos of the Cathedral of Seville
281
Laser cleaning of varnishes and contaminants on brass
282
Laser cleaning: a study on greyish alteration induced on non-patinated marbles
283
Laser cleaning: an alternative method for removing oil-spill fuel residues
284
Laser cleaning: Boris Lukʹyanchuk; World Scientific Publishing, Singapore, 2002, 466 pp, price £53.00 hardback, ISBN 981-03-4941-1
285
Laser cleaning: is there specific laser esthetics?
286
Laser coating of aluminum alloy EN AW 6082-T651 with TiB2 and TiC: Microstructure and mechanical properties
287
Laser coatings to improve wear resistance of mould steel
288
Laser coding on the eggshell using pulsed-laser marking system
289
Laser composite surfacing of a magnesium alloy with silicon carbide
290
Laser composite surfacing of a magnesium alloy with silicon carbide
291
Laser composite surfacing of AISI 304 stainless steel with titanium boride for improved wear resistance
292
Laser compression of monocrystalline tantalum Original Research Article
293
Laser compression of nanocrystalline tantalum
294
Laser conditioning and multi-shot laser damage accumulation effects of HfO2/SiO2 antireflective coatings
295
Laser conditioning of ZrO2:Y2O3/SiO2 mirror coatings prepared by E-beam evaporation
296
Laser control in open molecular systems: STIRAP and Optimal Control
297
Laser control of degenerate system by stimulated Raman adiabatic passage
298
Laser control of population dynamics with bichromatic fields: direct search through field amplitude, frequency, and phase space
299
Laser Control of Single and Double Proton Transfer Reactions
300
Laser controlled melting of HSLA steel surface with presence of B4C particles
301
Laser controlled melting of pre-treated zirconia surface
302
Laser controlled molecular switches and transistors
303
Laser controlled nanodeposition of neutral atoms
304
Laser cooling and crystalline beams in storage rings
305
Laser cooling and crystalline beams in storage rings
306
Laser cooling and photoionization of alkali atoms
307
Laser cooling of an electron beam by the coherent scattering of a strong laser beam
308
Laser cooling of electron beams at linear colliders
309
Laser cooling of electron beams at linear colliders
310
Laser cooling of electron beams via Thomson scattering
311
Laser cooling of electron beams via Thomson scattering
312
Laser cooling of fast stored ions in barrier buckets
313
Laser cooling of fast stored ions in barrier buckets
314
Laser cooling of molecules by dynamically trapped states Original Research Article
315
Laser cooling of quasi-free atoms in a nondissipative optical lattice
316
Laser cooling of TeV muons
317
Laser cooling of TeV muons
318
Laser cooling system of ortho-positronium
319
Laser cooling system of ortho-positronium
320
Laser co-photolytic approach to copper(I) bromide/polymer nanosol and nanocomposite
321
Laser coupling of the numerous flattened Gaussian beams in the fiber-based ICF laser driver
322
Laser crystallisation of poly-SiGe for microbolometers
323
Laser crystallization of amorphous SiC thin films on glass
324
Laser crystallization of amorphous silicon films investigated by Raman spectroscopy and atomic force microscopy
325
Laser crystallization of amorphous sputter-deposited quasicrystalline coatings
326
Laser crystallization studies of barium strontium titanate thin films
327
Laser cutting of different polymeric plastics (PE, PP and PC) by a CO2 laser beam
328
Laser cutting of metal laminates: analysis and experimental validation
329
Laser cutting of steel sheets: Influence of workpiece thickness and beam waist position on kerf size and stria formation
330
Laser cutting of thick ceramic substrates by controlled fracture technique
331
Laser cutting of thick ceramic tile
332
Laser cutting of thick sheet metals: Effects of cutting parameters on kerf size variations
333
Laser cutting of triangular blanks from thick aluminum foam plate: Thermal stress analysis and morphology
334
Laser cutting quality assessment and thermal efficiency analysis
335
Laser cutting speeds for ceramic tile: a theoretical–empirical comparison
336
Laser cutting: influence on morphological and physicochemical properties of polyhydroxybutyrate
337
Laser CVD of cubic SiC nanocrystals
338
Laser cycling and thermal cycling exposure of thermal barrier coatings on copper substrates
339
Laser damage investigations of Cu mirrors
340
Laser damage of alkaline-earth fluorides at 248 nm and the influence of polishing grades
341
Laser damage of CaF2(111) surfaces at 248 nm
342
Laser damage of glycidoxypropyltrimethoxysilane based hybrid materials
343
Laser damage of KU-1 quartz glass coated with hydrocarbon films
344
Laser damage studies of silicon surfaces using ultra-short laser pulses
345
Laser damage testing of small optics for the National Ignition Facility
346
Laser damage thresholds of ITER mirror materials and first results on in situ laser cleaning of stainless steel mirrors
347
Laser densification of alumina powder beds generated using aerosol assisted spray deposition
348
Laser densification of organic coating: Effects of laser wavelength, operating parameters and substrate properties
349
Laser densification of sol–gel silica coatings on aluminium matrix composites for corrosion and hardness improvement
350
Laser densification of TiO2 films prepared by aerosol assisted vapour deposition
351
Laser dentistry practice management
352
Laser depolarization studies of simulated crystallized H2O/H2SO4 clouds
353
Laser deposited biocompatible Ca–P coatings on Ti–6Al–4V: Microstructural evolution and thermal modeling
354
Laser deposited TiC/H13 tool steel composite coatings and their erosion resistance
355
Laser deposition and deformation behavior of Ti–Nb–Zr–Ta alloys for orthopedic implants
356
Laser deposition of compositionally graded titanium–vanadium and titanium–molybdenum alloys
357
Laser deposition of cryoglobulin blood proteins thin films by matrix assisted pulsed laser evaporation
358
Laser deposition of diamond-like films from liquid aromatic hydrocarbons
359
Laser deposition of fibrinogen blood proteins thin films by matrix assisted pulsed laser evaporation
360
Laser deposition of metallic alloys and multilayers
361
Laser Deposition of Polymer and Biomaterial Films
362
Laser deposition of shape-memory alloy for MEMS applications
363
Laser deposition of thin films with varying substrate temperature during film growth
364
Laser deposition of thin SiO2 and ITO ®lms
365
Laser deposition of YBa2Cu3O7 films on MgO(100) at 100 mm target-substrate distance and oxygen pressures below 0.1 mbar
366
Laser deposition of YBaCuO thin films: stress measurements and microstructure investigations
367
Laser deposition of YBaCuO thin films: stress measurements and microstructure investigations
368
Laser Desorption and Imaging of Proteins from Ice via UV Femtosecond Laser Pulses
369
Laser Desorption Combined with Hyperthermal Surface Ionization Time-of-Flight Mass Spectrometry
370
Laser desorption ionization of size resolved liquid microdroplets
371
Laser desorption of C-contaminated Pd clusters grown on MgO(100)
372
Laser desorption of deuterium retained in re-deposited carbon layers at TEXTOR and JET
373
Laser desorption of NO from a thick C60 film
374
Laser desorption/ionization of single ultrafine multicomponent aerosols
375
Laser desorption/ionization time of flight mass spectrometry of phosphorus-containing carbons
376
Laser desorption/ionization using vacuum-uv single photon ionization for analysis of organic components in tobacco smoke and ambient aerosols
377
Laser desorption–ionization of polycyclic aromatic hydrocarbons from glass surfaces with ion mobility spectrometry analysis Original Research Article
378
Laser desorption–ionization time of flight mass spectrometry of various carbon materials Original Research Article
379
Laser detection of elastic waves diffraction by the crack’s edge
380
Laser detection of optical signals
381
Laser detection of radiation enhanced electron transport in ultra-thin oxides
382
Laser detection of radiation enhanced electron transport in ultra-thin oxides
383
Laser developed Al–Mo surface alloys: Microstructure, mechanical and wear behaviour
384
Laser diagnostic technology for early detection of pathogen infestation in orange fruits
385
Laser diagnostic technology for early detection of pathogen infestation in orange fruits
386
Laser diagnostics for droplet characterization: Application of morphology dependent resonances
387
Laser diagnostics of C60 and C70 films by broadband surface acoustic wave spectroscopy
388
Laser diagnostics of mechanical and elastic properties of silicon and carbon films
389
Laser diagnostics of nanoscale dielectric films on absorbing substrate by differential reflectivity and ellipsometry
390
Laser diagnostics of nanoscale dielectric films on transparent substrate by integrating differential reflectivity and ellipsometry
391
Laser diagnostics of soot precursors in a heavy-duty diesel engine at low-temperature combustion conditions
392
Laser diffraction analysis of the disintegration of aeolian sedimentary aggregates in water
393
Laser diffraction and multifractal analysis for the characterization of dry soil volume-size distributions
394
Laser diffraction characterization of droplet size distributions produced by vibrating mesh nebulization in air and a helium–oxygen mixture
395
Laser Diffraction Method Measurements of Particle--Gas Dispersion Effects in a Coaxial Jet
396
Laser diffraction particle sizing by wet dispersion method for spray-dried infant formula Original Research Article
397
Laser diffraction particle sizing of cohesive lactose powders
398
Laser diffraction, transmission electron microscopy and image analysis to evaluate a bimodal Gaussian model for particle size distribution in soils
399
Laser diffusion nitriding of Ti–6Al–4V for improving hardness and wear resistance
400
Laser diode based oxygen sensing: A comparison of VCSEL and DFB laser diodes emitting in the 762 nm region
401
Laser diode interferometer used for measuring displacements in large range with a nanometer accuracy
402
Laser diode reliability: crystal defects and degradation modes
403
Laser diode spectroscopy of the H2O isotopologues in the 2.64 μm region for the in situ monitoring of the Martian atmosphere
404
Laser diode transmission welding of polypropylene: Geometrical and microstructure characterisation of weld
405
Laser Diopexy for Peripheral Retinal Ablation in Proliferative Diabetic Retinopathy
406
Laser direct joining of AZ91D thixomolded Mg alloy and amorphous polyethylene terephthalate
407
Laser direct joining of carbon fiber reinforced plastic to zinc-coated steel
408
Laser direct manufacturing of tungsten nickel collimation component
409
Laser Direct Metal Deposition Technology and Microstructure and Composition Segregation of Inconel 718 Superalloy Original Research Article
410
Laser direct patterning of the T-shaped ITO electrode for high-efficiency alternative current plasma display panels
411
Laser direct synthesis of graphene on quartz Original Research Article
412
Laser direct writing and instabilities: a one-dimensional approach
413
Laser direct writing of combinatorial libraries of idealized cellular constructs: Biomedical applications
414
Laser direct writing of copper on polyimide surfaces from solution
415
Laser direct writing of palladium on polyimide surfaces from solution
416
Laser Direct Writing Polymeric Single-Mode Waveguide Devices with a Rib Structure
417
Laser divestment for natural history museum collections
418
Laser doping for microelectronics and microtechnology
419
Laser doping in Si, InP and GaAs
420
Laser doping of chromium as a double acceptor in silicon carbide with reduced crystalline damage and nearly all dopants in activated state Original Research Article
421
Laser Doppler and phase Doppler measurement techniques; H.-E. Albrecht, M. Borys, N. Damasche, C. Tropea, Springer-Verlag, Berlin, Heidelberg, New York, 2003, ISBN 3-540-67838-7, 738 pages, hard cover
422
Laser Doppler Anemometer Measurements in Bubble Column: Effect of Sparger
423
Laser Doppler anemometry and conditional sampling
424
Laser Doppler anemometry and conditional sampling
425
Laser Doppler anemometry and the acousto-optic effect
426
Laser Doppler anemometry measurements in a circulating fluidized bed of metal particles
427
Laser Doppler anemometry measurements in an index of refraction matched column in the presence of dispersed beads: Part I
428
Laser Doppler anemometry measurements of laminar flow in helical pipes
429
Laser Doppler imaging and capillary microscopy in ischemic ulcers Original Research Article
430
Laser Doppler imaging determines need for excision and grafting in advance of clinical judgment: a prospective blinded trial
431
Laser Doppler imaging of burn scars: a comparison of wavelength and scanning methods
432
Laser Doppler Imaging of paediatric burns: Burn wound outcome can be predicted independent of clinical examination
433
Laser Doppler imaging prediction of burn wound outcome in children
434
Laser Doppler measurement and CFD validation in 3 × 3 bundle flow
435
Laser Doppler Measurements of the Vocal Fold Blood Micro-Circulation
436
Laser Doppler spectroscopy towards the detection of spontaneous muscle activity
437
Laser Doppler velocimetry analysis of transitional pipe flow
438
Laser Doppler-recorded venoarteriolar reflex in Raynaudʹs phenomenon
439
Laser dressed donor impurities in free-standing GaAs films under an electric field
440
Laser dressing effects in low-dimensional semiconductor systems
441
Laser Dressing of Metal Bonded Diamond Wheel
442
Laser dressing of the electronic bands in semiconductors
443
Laser drilling of cooling holes through plasma sprayed thermal barrier coatings
444
Laser drilling of Ni–YSZ cermets
445
Laser Drilling of Small Holes in Different Kinds of Concrete
446
Laser drilling of thick material using femtosecond pulse with a focus of dual-frequency beam
447
Laser driven attosecond SASE X-ray FEL
448
Laser driven attosecond SASE X-ray FEL
449
Laser driven hydrogen tunneling in a dissipative environment Original Research Article
450
Laser driven X-ray parametric amplification in neutral gases—a new brilliant light source in the XUV
451
Laser driven X-ray parametric amplification in neutral gases—a new brilliant light source in the XUV
452
Laser droplet generation: Application to droplet joining
453
Laser effect on the 248 nm KrF transition using heavy ion beam pumping
454
Laser effect on the 248 nm KrF transition using heavy ion beam pumping
455
Laser effects on osteogenesis
456
Laser Effects on the Prevention and Treatment of Dentinal Hypersensitivity: A Systematic Review
457
Laser electron acceleration with 10 PW lasers
458
Laser emission from dye doped microspheres produced on a chip
459
Laser emission from solutions and films containing semiconducting polymer and titanium dioxide nanocrystals
460
Laser energy density, structure and properties of pulsed-laser deposited zinc oxide films
461
Laser Energy Source in Surgical Atrial Fibrillation Ablation: Preclinical Experience
462
Laser engineered net shaping process for SAE 4140 low alloy steel
463
Laser engineered surfaces from glass forming alloy powder precursors: Microstructure and wear
464
Laser enhanced H2 chemisorption on Ni1 − yO catalysts for CO2 reduction
465
Laser enrichment of carbon-13: operational experience with a large photochemical reactor for macroscopic separation
466
LASER EPITHELIAL KERATOMILEUSIS (LASEK) FOR MYOPIA IN PATIENTS WITH THIN CORNEA
467
Laser etching of polymer masked leadframes
468
Laser etching of Thoria pellets for microstructural investigations
469
Laser etching of transparent materials at a backside surface adsorbed layer
470
Laser Evoked Potentials in Early and Presymptomatic Huntington's Disease
471
Laser evoked potentials in patients with trigeminal disease: The absence of Aδ potentials does not unmask C-fibre potentials
472
Laser Excess Noise Reduction in Optical Phase-Shift Measurements
473
Laser excision of multiple esophageal lymphangiomas: A case report and review of the literature
474
Laser excitation and dispersed fluorescence investigations of the
475
Laser excitation and excited state dynamics in vanadium dioxide thin film
476
Laser excitation of surface wave motion
477
Laser excited charge transfer processes in oxygen organic molecules mixtures: O 3P / formation
478
Laser eye surgery for refractive errors
479
Laser fabricated microchannels inside photostructurable glass-ceramic
480
Laser fabrication and characterization of sub-millimeter joints between polyimide and Ti-coated borosilicate glass
481
Laser fabrication of Mo-TiC MMC on AA6061 aluminum alloy surface
482
Laser fabrication of porous surface layer on NiTi shape memory alloy
483
Laser fabrication of Ti6Al4V/TiC composites using simultaneous powder and wire feed
484
Laser field designing by evolutionary algorithm for coherent control of molecular dynamics
485
Laser field effect on the nonlinear optical properties of a square quantum well under the applied electric field
486
Laser field induced interband absorption in a strained GaAs/GaAlAs double quantum well system
487
Laser fired contacts applied to the rear surface of heterojunction silicon solar cells
488
Laser Flash Photolysis Experiments on the Effects of Freezing and Salt Addition on Intramolecular Electron Transfer within One-Electron Reduced Ascorbate Oxidase
489
Laser flash photolysis of benzophenone in thin silicone films
490
Laser flash photolysis of dioxo iron phthalocyanine intercalated in hydrotalcite and its use as a photocatalyst
491
Laser flash photolysis of IrCl62− in aqueous solutions Original Research Article
492
Laser flash photolysis of new water-soluble peroxyl radical precursor
493
Laser flash photolysis production of metal-oxo derivatives and direct kinetic studies of their oxidation reactions
494
Laser flash photolysis studies of tris(2,2′-bipyridine)nickel(II) ion in aqueous solution
495
Laser flash photolysis studies on the induced-quenching process competing with hydrogen atom abstraction of triplet benzophenone. Heavy atom effect
496
Laser flash photolysis studies on the interaction between triplet benzophenone and naphtholate anions. Electron transfer or triplet energy transfer?
497
Laser Flash Photolysis Study of Dialkylphenacylsulfonium Salts
498
Laser flash photolysis study of electron transfer processes of adsorbed anthracene on titania–silica surfaces
499
Laser flash photolysis study of nicotinic acid in water
500
Laser flash photolysis study of the aminophthalimide derivatives: Elucidation of the nonradiative deactivation route
501
Laser flash photolysis study of the photochemistry of isatin and N-methylisatin
502
Laser flash photolysis study of the photochemistry of ninhydrin and its 5-methoxy derivative in benzene solution
503
Laser Flash Photolysis Study on Hydrogen Atom Transfer of 2-(2-Hydroxyphenyl)benzoxazole and 2-(2-Hydroxyphenyl)benzothiazole in the Triplet Excited State
504
Laser flash photolysis with back-reflected excitation light—Analysis and experimental verification of the improvements in excitation intensity and homogeneity by a retroreflector
505
Laser fluence dependence of the elastic properties of diamond-like carbon films prepared by pulsed-laser deposition
506
Laser fluence, repetition rate and pulse duration effects on paint ablation
507
Laser fluorescence study of the S(1D) + CD4 reaction: determination of the SD product internal state distribution
508
Laser forming of aluminium and aluminium alloys — microstructural investigation
509
Laser forming of bi-layer Fe/Al sheet by Nd: YAG laser
510
LASER FORMING OF METALLIC DOME‐SHAPED PARTS USING SPIRAL AND RADIAL‐CIRCULAR SCAN PATHS
511
Laser forming of open-cell aluminium foams
512
Laser forming of plates using rotating and dithering beams
513
Laser forward transfer using a sacrificial layer: Influence of the material properties
514
Laser frequency stabilisation for LISA: Experimental progress Original Research Article
515
Laser frequency stabilization at 1.5 microns using ultranarrow inhomogeneous absorption profiles in Er3+:LiYF4
516
Laser from the dimer state of a conjugated polymer (PFO) in solution
517
Laser gas assisted nitriding and tin coating of Ti–6Al–4V alloy: Experimental and numerical investigation of mechanical properties
518
Laser gas assisted treatment of pre-prepared high strength low alloy steel surface
519
Laser gas assisted treatment of tungsten carbide tile surface
520
Laser gas nitriding of pure titanium using CW and pulsed Nd:YAG lasers
521
Laser gas-assisted processing of carbon coated and TiC embedded Ti–6Al–4V alloy surface
522
Laser generated Ge ions accelerated by additional electrostatic field for implantation technology
523
Laser generated soliton waveguides in photorefractive crystals
524
Laser generation and ab initio studies of CnN− clusters
525
Laser gettering of structural-impurity defects in the contacts of metal–intrinsic CdTe with a Schottky barrier
526
Laser glazing of FeCr–TiC composite coatings
527
Laser glazing of plasma-sprayed nanostructured yttria stabilized zirconia thermal barrier coatings
528
Laser granulometry measurements on electrified jets for different lengths of injector
529
Laser grooved buried contact cells optimised for linear concentration systems
530
Laser grooving of Al2O3 plate by a pulsed Nd:YAG laser: Characteristics and application to the manufacture of gas sensors array heater
531
Laser heated dE/dX experiments in Japan
532
Laser heated dE/dX experiments in Japan
533
Laser heated dE/dX experiments in Japan
534
Laser heated pedestal growth and optical properties of Yb3+-doped LiNbO3 single crystal fibers
535
Laser heated pedestal growth and spectroscopic properties of K2NdNb5O15 and Ba2NdNbO6 crystals
536
Laser heated pedestal growth and spectroscopic properties of neodymium doped Ba2NaNb5O15 single crystal fibers
537
Laser heating and ablation at high repetition rate in thermal confinement regime
538
Laser heating and surface evaporation
539
Laser Heating Dynamics of Poly(methyl methacrylate) Films Doped with Aromatic Molecules as Revealed by Analysis of Diffusion of Triplet States
540
Laser heating effect on Raman spectra of styrene–butadiene rubber/multiwalled carbon nanotube nanocomposites
541
Laser heating of near-field tips
542
Laser heating of near-field tips
543
Laser heating of semi-infinite solid with consecutive pulses: Influence of materaial properties on temperature field
544
Laser heating of sheet metal and thermal stress development
545
Laser heating: an electron-kinetic theory approach and induced thermal stresses
546
Laser Hemorrhoidoplasty Procedure vs Open Surgical Hemorrhoidectomy: a Trial Comparing 2 Treatments for Hemorrhoids of Third and Fourth Degree
547
Laser Hole Boring and Hot Electron Generation in the Fast Ignition Scheme
548
Laser hole drilling quality and efficiency assessment
549
Laser hydrothermal reductive ablation of titanium monoxide: Hydrated TiO particles with modified Ti/O surface
550
Laser hyperacoustic spectroscopy of single crystal germanium
551
Laser Hyperthermia for Treatment of Implanted Malignant Tumour in Mice
552
Laser ignition of methane–air mixtures at high pressures
553
Laser ignition of nanocomposite thermites
554
Laser ignition of ultra-lean methane/hydrogen/air mixtures at high temperature and pressure
555
Laser IInterferometric Dilatometer Applicable to Temperature Range from 1300 to 2000 K
556
Laser implantation of dicyanoanthracene in poly methyl methacrylate/from a 100-nm aperture micropipette
557
Laser implantation of fluorescent molecules into polymer films
558
Laser implantation of molecular aggregates into poly methyl methacrylate/
559
Laser implantation of molecular aggregates into poly methyl methacrylate/
560
Laser implantation of photochromic molecules into polymer films: a new approach towards molecular device fabrication
561
Laser impulse coupling at 130 fs
562
Laser in Dentistry During COVID-19 Pandemic: A Brief Review of Literature
563
Laser in Situ Keratomileusis for the Treatment of Refractive Errors in Patients with Multiple Sclerosis
564
Laser in situ keratomileusis for treated myopic anisometropic amblyopia in children
565
Laser in Situ Keratomileusis Outcomes among Myopic and Myopic Astigmatism Patients with Thin Cornea
566
Laser in Situ Keratomileusis versus Laser Assisted Subepithelial Keratectomy for the Correction of Low to Moderate Myopia and Astigmatism
567
Laser in vessel viewing system for activated areas: mechanical design, manufacturing and tests
568
Laser induced activation of circuit lines and via-holes on AlN for electroless metal plating
569
Laser induced adsorption site changes of CO adsorbed at nanoparticulate palladium aggregates on an alumina support driven by local adsorbate density fluctuations
570
Laser induced backside dry etching of transparent materials
571
Laser induced breakdown spectroscopy and characterization of environmental matrices utilizing multivariate chemometrics
572
Laser Induced Breakdown Spectroscopy application for ash characterisation for a coal fired power plant
573
Laser Induced Breakdown Spectroscopy application for ash characterisation for a coal fired power plant
574
Laser induced breakdown spectroscopy as diagnostics for fuel retention and removal and wall composition in fusion reactors with mixed-material components
575
Laser induced breakdown spectroscopy characterization of Ca in a soil depth profile
576
Laser induced breakdown spectroscopy for analysis and characterization of degradation pathologies of Roman glasses
577
Laser induced breakdown spectroscopy for bulk minerals online analyses
578
Laser induced breakdown spectroscopy for bulk minerals online analyses
579
Laser induced breakdown spectroscopy for contamination removal on engine-run thermal barrier coatings
580
Laser induced breakdown spectroscopy for fast elemental analysis and sorting of metallic scrap pieces using certified reference materials
581
Laser induced breakdown spectroscopy for fast elemental analysis and sorting of metallic scrap pieces using certified reference materials
582
Laser Induced Breakdown Spectroscopy in archeometry: A review of its application and future perspectives
583
Laser induced breakdown spectroscopy library for the Martian environment
584
Laser Induced Breakdown Spectroscopy machine for online ash analyses in coal
585
Laser Induced Breakdown Spectroscopy machine for online ash analyses in coal
586
Laser Induced Breakdown Spectroscopy methodology for the analysis of copper-based-alloys used in ancient artworks
587
Laser Induced Breakdown Spectroscopy methodology for the analysis of copper-based-alloys used in ancient artworks
588
Laser induced breakdown spectroscopy of soils, rocks and ice at subzero temperatures in simulated martian conditions
589
Laser induced breakdown spectroscopy of soils, rocks and ice at subzero temperatures in simulated martian conditions
590
Laser induced breakdown spectroscopy on metallic alloys: Solving inhomogeneous optically thick plasmas
591
Laser induced breakdown spectroscopy on metallic alloys: Solving inhomogeneous optically thick plasmas
592
Laser induced breakdown spectroscopy on meteorites
593
Laser induced breakdown spectroscopy on meteorites
594
Laser induced breakdown spectroscopy on soils and rocks: Influence of the sample temperature, moisture and roughness
595
Laser induced breakdown spectroscopy on soils and rocks: Influence of the sample temperature, moisture and roughness
596
Laser induced breakdown spectroscopy stratigraphic characterization of multilayered painted surfaces
597
Laser induced breakdown spectroscopy stratigraphic characterization of multilayered painted surfaces
598
Laser induced breakdown spectroscopy: A potential tool for atmospheric carbon dioxide measurement
599
Laser induced breakdown spectroscopy: A potential tool for atmospheric carbon dioxide measurement
600
Laser induced changes in Pt and Tl metal nanoparticles
601
Laser induced chemical and physical modifications of polymer films: dependence on the irradiation wavelength
602
Laser induced chemical vapour deposition of polymeric films from thiophene
603
Laser induced copper electroless plating on polyimide with Q-switch Nd:YAG laser
604
Laser induced creep and fracture in ceramics
605
Laser induced creep and fracture in ceramics
606
Laser induced Cu/alumina bonding: Microstructure and bond mechanism
607
Laser induced damage enhancement due to stainless steel deposition on KS-4V and KU1 quartz glasses
608
Laser induced damage for diamond films
609
Laser induced damage studies in mercury cadmium telluride
610
Laser induced damage thresholds and laser safety levels. Do the units of measurement matter?
611
Laser induced deposition of nanocrystalline Si with preferred crystallographic orientation
612
Laser induced deposition of tungsten and copper
613
Laser induced deposition of tungsten and copper
614
Laser induced desorption as tritium retention diagnostic method in ITER
615
Laser induced dispersed fluorescence spectra of CH3N radical and the lifetime of its أ3E state
616
Laser induced dynamic spectral weight transfer in La0.7Ca0.3MnO3 Original Research Article
617
Laser induced emission spectra of polyyne molecules C2nH2 (n = 5–8)
618
Laser induced flexural wave analysis: an aluminum element in steel substrate
619
Laser induced fluorescence and dispersed fluorescence spectra of zirconium monoxide between 460 and 560 nm
620
Laser induced fluorescence and photochemical derivatization for trace determination of camptothecin
621
Laser induced fluorescence and ultraviolet absorption spectra and the ring-puckering potential function of 1,4-dihydronaphthalene in its ground and S1(π, π∗) electronic states
622
Laser induced fluorescence coupled to capillary electrophoresis for the determination of fluoroquinolones in foods of animal origin using molecularly imprinted polymers
623
Laser induced fluorescence instrument for NO2 measurements: Observations at a central Italy background site
624
Laser induced fluorescence measurements of radical concentrations in hydrogen–hydrocarbon hybrid gas fuel flames
625
Laser induced fluorescence of jet-cooled non-conjugated bichromophores: bis-phenoxymethane and bis-2,6-dimethylphenoxymethane Original Research Article
626
Laser induced fluorescence spectroscopy in flames
627
Laser induced fluorescence spectroscopy of AlNC/AlCN in supersonic free expansions
628
Laser induced fluorescence spectroscopy of aromatic species produced in atmospheric sooting flames using UV and visible excitation wavelengths
629
Laser induced fluorescence spectroscopy of boron carbide
630
Laser induced fluorescence spectroscopy of iridium monophosphide
631
Laser induced fluorescence spectroscopy of jet cooled trans 1-methoxynaphthalene: A comparative study with trans 1-hydroxynapthalene
632
Laser induced fluorescence spectroscopy of ruthenium monoboride
633
Laser induced fluorescence spectroscopy of the HC4S and DC4S radicals
634
Laser induced fluorescence spectroscopy of the HC6S radical
635
Laser induced fluorescence spectroscopy of ZrN: rotational structure in the A2Π-X2Σ(2,2) band
636
Laser induced fluorescence study of the - transition of FCH2CH2O
637
Laser induced foaming and chemical modifications of gelatine films
638
Laser induced forward transfer aluminum layers: Process investigation by time resolved imaging
639
Laser induced forward transfer of metal oxides using femtosecond double pulses
640
Laser induced gas-surface reaction of Cl2 supersonic molecular beam with a nickel surface
641
Laser induced H2 production employing Pt-TiO2 photocatalysts
642
Laser induced heating of Si nanocrystals
643
Laser induced hierarchical calcium phosphate structures
644
Laser -induced incandescence method for ultrafine particle sizing
645
Laser induced ion emission from wide bandgap materials
646
Laser induced local and periodic phase transformations in iron oxide thin films obtained by chemical vapour deposition
647
Laser induced modification of surface structures
648
Laser induced modification on 40BaO–45B2O3–15TiO2 glass composition
649
Laser induced molecular transfer using ablation of a triazeno-polymer
650
Laser induced morphology change of silver colloids: formation of nano-size wires
651
Laser induced multi-component luminescence of [CuNCS(1,10-phen)P(CH2N(CH2CH2)2O)3]—the first example of CuNCS complexes with diimines and tris(aminomethyl)phosphanes
652
Laser induced nitridation of Ga on GaAs surfaces
653
Laser Induced Nuclear Physics and Applications Original Research Article
654
Laser induced optoacoustic spectroscopy of benzil: Evaluation of structural volume change upon photoisomerization
655
Laser induced periodic structure on lecithin-doped polyimide film surface and its ability to align liquid crystal molecules
656
Laser induced periodic structures in porous silicon
657
Laser induced periodic surface structures on iron
658
Laser induced photo-catalytic oxidation/splitting of water over α-Fe2O3, WO3, TiO2 and NiO catalysts: activity comparison
659
Laser induced photodissociation of CH2Cl2 and CH2Br2 at 355 nm: an experimental and theoretical study
660
Laser induced quasi-periodical microstructures with external field modulation for efficiency gain in photovoltaics
661
Laser induced reaction synthesis of TiC+WC reinforced metal matrix composites coatings on Al 6061
662
Laser Induced Reverse Transfer with metal and hybrid material prepared with sol–gel process used on glass substrate
663
Laser induced simultaneous etching of silicon and deposition of carbon materials
664
Laser induced spin state transition: Spectral and temporal evolution
665
Laser induced structural and transport properties change in Cu–Zn ferrites
666
Laser induced surface modification of polylactide
667
Laser induced surface modifications on ZrO2 ceramics
668
Laser induced surface nano-structuring of Ti–6Al–4V for adhesive bonding
669
Laser induced synthesis of nanoparticles in liquids
670
Laser induced thermal desorption of hydrogen from Zr(0 0 0 1): Relationship to water dissociation and hydrogen dissolution
671
Laser induced thermal lens spectrometry for cobalt determination after cloud point extraction Original Research Article
672
Laser induced thermoelectric voltage effect in ferroelectric thin film
673
Laser induced-thermal lens spectrometry after cloud point extraction for the determination of trace amounts of rhodium
674
Laser induced-thermal lens spectrometry in combination with dispersive liquid–liquid microextraction for trace analysis Original Research Article
675
Laser induction hybrid rapid cladding of WC particles reinforced NiCrBSi composite coatings
676
Laser inertial fusion dry-wall materials response to pulsed ions at power-plant level fluences
677
Laser in-situ synthesis of TiB2–Al composite coating for improved wear performance
678
Laser intensification by spherical inclusions embedded within multilayer coatings
679
Laser interaction in sol–gel based materials—3-D lithography for photonic applications
680
Laser interaction with coated collagen and cellulose fibre composites: fundamentals of laser cleaning of ancient parchment manuscripts and paper
681
Laser interaction with polychromy: laboratory investigations and on-site observations
682
Laser interference lithography as a new and efficient technique for micropatterning of biopolymer surface
683
Laser interference lithography using spray/spin photoresist development method for consistent periodic nanostructures
684
Laser interference metallurgy: A new method for periodic surface microstructure design on multilayered metallic thin films
685
Laser interference metallurgy—periodic surface patterning and formation of intermetallics
686
Laser interferometer space antenna dynamics and controls model
687
Laser interferometric determination of ampicillin and colistin transfer through cellulose biomembrane in the presence of Proteus vulgaris O25 lipopolysaccharide
688
Laser interferometric method for measuring linear polymerization shrinkage in light cured dental restoratives
689
Laser interferometric method for ns-time scale thermal mapping of Smart Power ESD protection devices during ESD stress
690
Laser interferometric method for ns-time scale thermal mapping of Smart Power ESD protection devices during ESD stress
691
Laser ion acceleration with micro-grooved targets
692
Laser ion acceleration with micro-grooved targets
693
Laser ion source for low-charge heavy ion beams
694
Laser ion source for low-charge heavy ion beams
695
Laser Ionisation Mass Analysis: Abos Vertes, Renaat Gijbels and Fred Adams (Eds.), Wiley, New York, 1993 (ISBN 0-471-53673-3). xx + 560 pp. Price £79.00
696
Laser Ionization Mass Spectroscopy of Single Aerosol Particles
697
Laser ionization measurements of gaseous gallium atom desorption from GaAs(100) during molecular beam epitaxy
698
Laser ionization time-of-flight mass spectrometer detection of methyl radical produced by ion–molecule reactions in a flowing-afterglow apparatus
699
Laser ionization time-of-flight mass spectrometry combined with residual gas analysis for the investigation of moderate temperature benzene oxidation
700
Laser irradiation did not increase the proliferation or the differentiation of stem cells from normal and inflamed dental pulp
701
Laser irradiation effects on the optical properties of layer-by-layer PPV/Congo Red thin films
702
Laser irradiation for purification of aligned carbon nanotube films
703
Laser irradiation of AISI 316L stainless steel coated with Si3N4 and Ti
704
Laser irradiation of atomic chains: A study based on the Density Functional Theory
705
Laser irradiation of carbon nanotubes
706
Laser irradiation of GaAsGaAlAs multi-quantum well structure
707
Laser irradiation of medieval pigments at IR, VIS and UV wavelengths
708
Laser irradiation of oligosiloxane copolymer thin films functionalized with side chain bulky carbosilane moieties
709
Laser irradiation of α-SiC ceramics
710
Laser Irradiation on Growth of Trichophyton Rubrum: An in Vitro Study
711
Laser irradiation—an effective means to create an anti-tarnishing surface on purple gold substrate
712
Laser jet spectra of methyl 3-chlorobenzoate
713
Laser kinetic spectroscopy of the interfacial charge transfer between membrane cell walls of E. coli and TiO2
714
Laser land levelling as a strategy for environmental management: the case of Iran
715
Laser lesions simulate microvessel stroke
716
Laser lift-off of very thin AlGaN film from sapphire using selective decomposition of GaN interlayer
717
Laser light backscattering to monitor moisture content, soluble solid content and hardness of apple tissue during drying
718
Laser light scattering in a laser-induced argon plasma: Investigations of the shock wave
719
Laser light scattering in a laser-induced argon plasma: Investigations of the shock wave
720
Laser light sources for space-based gravitational wave detectors Original Research Article
721
Laser light-scattering studies of pachyman
722
Laser lock-in thermography for thermal contact characterisation of surface layer
723
Laser lock-in thermography for thermal contact characterisation of surface layer
724
Laser Machining by short and ultrashort pulses, state of the art and new opportunities in the age of the photons
725
laser machining for fabrication of hohlaraums and capsules
726
Laser machining in die making—a modern rapid tooling process
727
Laser machining of Al2O3–ZrO2 (3%Y2O3) eutectic composite
728
Laser machining of structural ceramics—A review
729
Laser manipulation of clusters, structural defects and nanoaggregates in barrier structures on silicon and binary semi-conductors
730
Laser manipulation of nanodiamonds
731
Laser mass spectrometry at high vibrational excitation density
732
Laser mass spectrometry of biological molecular ions produced by matrix assisted laser desorption ionization (MALDI)
733
Laser MBE of ceramic thin films for future electronics
734
Laser measurement of absolute charge collection efficiency of a silicon detector
735
Laser measurement of absolute charge collection efficiency of a silicon detector
736
Laser measurements to space debris from Graz SLR station Original Research Article
737
Laser megajoule project and impact on the inertial fusion program
738
Laser melt injection in aluminum alloys: on the role of the oxide skin Original Research Article
739
Laser melting functionally graded composition of Waspaloy and Zirconia powders
740
Laser melting of carbide tool surface: Model and experimental studies
741
Laser melting of uranium carbides
742
Laser metrology -a diagnostic tool in automotive development processes
743
Laser micro/nano patterning of hydrophobic surface by contact particle lens array
744
Laser micro-bending process based on the characteristic of the laser polarization
745
Laser microdissection-based analysis of hypoxia- and thioredoxin-related genes in human stable carotid plaques
746
Laser micro-drilling of tool steel using Nd:YAG lasers
747
Laser microfabrication of transparent hard materials and signal diagnostics
748
Laser micro-grooved, Arginine-Glycine-Apspartic acid (RGD) coated dental implants, a 5 years radiographic follow-up
749
Laser micromachining for applications in thin film technology
750
Laser micromachining of barium aluminium borosilicate glass with pulse durations between 20 fs and 3 ps
751
Laser micromachining of free-standing structures in SiO2-covered silicon
752
Laser micromachining of sputtered DLC films
753
Laser micromachining of the materials using in microfluidics by high precision pulsed near and mid-ultraviolet Nd:YAG lasers
754
Laser micromachining of TiN coatings with variable pulse durations and shapes in ns regime
755
Laser micro-machining using near-field optics
756
Laser micro-milling of microchannel on copper sheet as catalyst support used in microreactor for hydrogen production
757
Laser microprobe analysis of soot precursor particles and carbonaceous soot,
758
Laser microprobe sulphur isotope analysis of arsenopyrite: experimental calibration and application to the Boliden Au–Cu–As massive sulphide deposit
759
Laser microprocessing of metallic stent for medical therapy
760
Laser micropyrolysis GC–MS of lignin
761
Laser Micro-Raman Spectroscopy of CVD Nanocrystalline Diamond Thin Film
762
Laser microscopic measurement of osteoclastic resorption pits on biomaterials
763
Laser microstructuring and annealing processes for lithium manganese oxide cathodes
764
Laser microstructuring for fabricating superhydrophobic polymeric surfaces
765
Laser milling as a rapid micromanufacturing process
766
Laser milling of cavity in ceramic substrate by fracture-machining element technique
767
Laser mode behavior of the Cassini CIRS Fourier transform spectrometer at Saturn
768
Laser mode locking using a saturable absorber incorporating carbon nanotubes
769
Laser Mode-Locking and Q-Switching Using a New Saturable Absorber Material Based on Carbon Nanotubes
770
Laser Modification of Preformed Polymer Microchannels: Application To Reduce Band Broadening around Turns Subject to Electrokinetic Flow
771
Laser modified microstructures in ZrB2, ZrB2/SiC and ZrC
772
Laser monitoring for the CMS ECAL
773
Laser monitoring for the CMS ECAL
774
LASER monitoring system for the ATLAS Tile Calorimeter
775
LASER monitoring system for the ATLAS Tile Calorimeter
776
Laser monitoring system for the CMS lead tungstate crystal calorimeter
777
Laser monitoring system for the CMS lead tungstate crystal calorimeter
778
Laser Multi-layer Cladding Experiment on the DD3 Single Crystal Using FGH95 Powder: Investigation on the Microstructure of Single Crystal Cladding Layer
779
Laser multi-layer cladding of Zr65Al7.5Ni10Cu17.5 amorphous alloy on magnesium substrates
780
Laser nano surface texturing for enhancing of physical and chemical properties of dental implants
781
Laser nano-manufacturing – State of the art and challenges
782
Laser nanostructuring of EB-PVD thermal barrier coatings for ultra-low thermal conductivity
783
Laser net shape welding
784
Laser nitriding of an intermetallic TiAl alloy with a diode laser
785
Laser nitriding of iron and aluminum
786
Laser nitriding of iron: influence of the spatial laser intensity distribution
787
Laser nitriding of iron: influence of the spatial laser intensity distribution
788
Laser nitriding of metals
789
Laser nitriding of titanium alloy in the atmosphere environment
790
Laser observation of flying ink jet electrostatically extracted:main results and application to tone reproduction of images
791
Laser on Acupuncture Points Versus Aerobic Exercises on Obese Patients after Gastric Banding Surgery
792
Laser operated elasto-optical features of La2CaB10O19:Pr3+ polymer nanocomposites
793
Laser optical interferometry as NDT methods for cleaner and sustainable desalination plants: pitting and crevice corrosion Original Research Article
794
Laser optical investigation of turbulent transport of temperature ahead of the preheat zone in a premixed flame
795
Laser optoacoustic tomography: Towards new technology for biomedical diagnostics
796
Laser optoacoustic tomography: Towards new technology for biomedical diagnostics
797
Laser optogalvanic spectroscopy of N2 from the A3Σu+ metastable state in a corona excited supersonic expansion
798
Laser optogalvanic spectroscopy of neon at 659.9 nm in a discharge plasma and nonlinear least-squares fitting of associated waveforms Original Research Article
799
Laser oscillation in 5-cm Nd-doped silica fiber fabricated by zeolite method
800
Laser output power over 5 W at 1.06 mum for Nd:GdVO4 single crystal
801
Laser oxygen isotope analysis of silicate/oxide grain separates: Evidence for a grain size effect?
802
Laser oxygen isotope analysis of weathering goethite from the lateritic profile of Yaou, French Guiana: paleoweathering and paleoclimatic implications
803
Laser particle precipitation-aided chemical vapour deposition of nanosized silicon carbonitride powders
804
Laser patterning and enhanced red photoluminescence of Er3+/Yb3+ co-doped CaF2 crystal dots and lines in oxyfluoride glasses
805
Laser patterning and magnetic properties of perovskite-type crystals on the glass surface
806
Laser patterning and morphology of two-dimensional planar ferroelastic rare-earth molybdate crystals on the glass surface
807
Laser patterning and packaging of CCD-CE-Chips made of PMMA
808
Laser patterning and preferential orientation of two-dimensional planar β-BaB2O4 crystals on the glass surface
809
Laser patterning of metallic films via buffer layer
810
Laser patterning of P2 interconnect via in thin-film CIGS PV modules
811
Laser patterning of SiOx-layers for the fabrication of UV diffractive phase elements
812
Laser patterning of thin film sensors on 3-D surfaces
813
Laser patterning of thin-film electrochemical gas sensors
814
Laser peening and shot peening effects on fatigue life and surface roughness of friction stir welded 7075-T7351 aluminum
815
Laser peening processing effect on mechanical and tribological properties of rolling steel 100Cr6
816
Laser percutaneous myocardial revascularization
817
Laser performance parameters of Yb3+ doped UV-transparent phosphate glasses
818
Laser Photobiomodulation for a Complex Patient with Severe Hydroxyurea-Induced Oral Ulcerations
819
Laser photochemical deposition of magnetite nanograins in a-Fe/C/O composite: High-pressure metal oxide polymorph surviving ambient conditions
820
Laser photodeposition of sulfur and room-temperature solid-state reaction with copper
821
Laser photodeposition of thin semiconductor films from iron carbonyl vapors
822
Laser photodetachment neutraliser for negative ion beams
823
Laser photodetachment of C60− and C70− ions cooled in a storage ring
824
Laser photodissociation of fluorinated molecular dications Original Research Article
825
Laser photodissociation of ketene at 230 nm Original Research Article
826
Laser photoelectron projection microscopy of insulating samples with sub-wavelength spatial resolution
827
Laser photoelectron projection microscopy with subwavelength spatial resolution
828
Laser photofragmention-laser induced fluorescence detection of the hydroperoxyl radical: photofragment energy distributions, detection sensitivity and kinetics
829
Laser photoionisation (REMPI) spectroscopy of the 3s ← n Rydberg transition of jet-cooled acetaldehyde (CH3CHO)
830
Laser photolysis of liquid benzene and hexafluorobenzene: Graphitic and polymeric carbon formation at ambient temperature Original Research Article
831
Laser photolysis of liquid benzene and toluene: Graphitic and polymeric carbon formation at ambient temperature Original Research Article
832
Laser photolysis of ND4. and trimethylamine formed by collisional neutralization of their cations in the gas phase
833
Laser photolysis of pyrenesulfonate and pyrenetetrasulfonate via two-photon ionization in aqueous and reverse micellar solutions
834
Laser photolysis of trans-dichloroethylene at 193 nm: Quantum yields of photoproducts
835
Laser photolysis studies of endoergonic triplet energy transfer in solution by observing the carbon–sulfur bond cleavage of triplet-sensitized naphthylmethyl phenyl sulfide
836
Laser photolysis studies of the formation and decay processes of triplet polyphenyl compounds sensitized by triplet benzophenone
837
Laser photolysis studies of the phenolic H-atom transfer mechanism for a triplet π,π∗ ketone in solution revisited
838
Laser Photolysis Studies of the Photochemical Reactions of Chromium(III) Octaethylporphyrin and Tetramesitylporphyrin Complexes in Toluene Solution
839
Laser photolysis studies on CuI complexes of thia-calix[3]pyridine. Phosphorescence from the intramolecular charge-transfer excited state
840
Laser photolysis studies on hydrogen atom abstraction by triplet benzophenone from hydroxyanilinium ions
841
Laser photolysis studies on triplet-equilibrium formation in a small triplet-energy gap system
842
Laser photolytic approach to Cu/polymer sols and Cu/polymer nanocomposites with amorphous Cu phase
843
Laser photo-oxidative degradation of 4,6-dimethyldibenzothiophene
844
Laser physical vapor deposition of boron carbide films to enhance cutting tool performance
845
Laser physics
846
Laser physics studies with Phebus as part of the megajoule laser project
847
Laser physics: Quantum controversy in action
848
Laser plasma acceleration of electrons with multi-PW laser beams in the frame of CILEX
849
Laser plasma acceleration of electrons with multi-PW laser beams in the frame of CILEX
850
Laser plasma threshold of metals
851
Laser Pointers: Low-cost, Low-tech Innovative, Interactive Instruction Tool Original Research Article
852
Laser pointers: the facts, media hype, and hysteria
853
Laser point-quadrat sampling for estimating foliage-height profiles in broadleaved forests
854
Laser Polarization State Measurement in Heterodyne Interferometry
855
Laser polarized muonic 3He and spin dependent μ− capture
856
Laser polarized muonic 3He and spin dependent μ− capture
857
Laser polymerization-based novel lift-off technique
858
LASER POSTERIOR CORDECTOMY FOR BILATERAL ABDUCTOR VOCAL CORD PALSY : A CASE REPORT
859
Laser Powder Bed Fusion: Evaluation of Ti15Mo single tracks
860
Laser powder micro-deposition of compositional gradient Ti–Cr alloy
861
Laser powder microdeposition of CP2 Titanium
862
Laser Power Dependence of Mass Spectral Signatures from Individual Bacterial Spores in Bioaerosol Mass Spectrometry
863
Laser powered homogeneous decomposition of 2,2-diethenylhexamethyltrisilane: Complex mechanism and gas-phase deposition of polycarbosilane
864
Laser powered homogeneous decomposition of selenophene and tellurophene
865
Laser precipitation of SnO2 nanocrystals in glass and energy transferred-fluorescence of Eu3+ ions
866
Laser pretreatment protects cells of broad bean from UV-B radiation damage
867
Laser printing of enamels on tiles
868
Laser printing of nanocomposite solid-state electrolyte membranes for Li micro-batteries
869
Laser printing of photoluminescent porous silicon features
870
Laser printing of polythiophene for organic electronics
871
Laser probe 40Ar/39Ar dating: History and development from a technical perspective
872
LASER PROBING OF SINGLE-AEROSOL DROPLET DYNAMICS
873
Laser Probing of the Plasma in the S-300 Facility
874
Laser processed protonic ceramics
875
Laser processed TiN reinforced Ti6Al4V composite coatings
876
Laser processed TiN reinforced Ti6Al4V composite coatings
877
Laser processing and characterization of ZnS–Cu thin films
878
Laser processing and chemistry: recent developments
879
Laser processing by using fluidic laser beam shaper
880
Laser Processing For Nanoscale Size Quantum Wires of AlGaAs/GaAs
881
Laser processing for thin film transistor applications
882
Laser processing for thin film transistor applications
883
Laser processing issues of nanosized intermetallic Fe–Sn and metallic Sn particles
884
Laser processing of bioactive tricalcium phosphate coating on titanium for load-bearing implants
885
Laser processing of diamond-like carbon–metal composites
886
Laser processing of Fe based bulk amorphous alloy coating on zirconium
887
Laser processing of Fe-based bulk amorphous alloy
888
Laser processing of II–VI compounds for improved doping: application to ZnSe:N
889
Laser processing of II–VI compounds for improved doping: application to ZnSe:N
890
Laser processing of inconel 600 and surface structure
891
Laser processing of insulator surfaces
892
Laser processing of micro-optical components in quartz
893
Laser processing of multicrystalline silicon for texturization of solar cells
894
Laser processing of natural mussel adhesive protein thin films
895
Laser processing of poly(methyl methacrylate) Lambertian diffusers
896
Laser processing of polyethylene glycol derivative and block copolymer thin films
897
Laser processing of polymer thin films for chemical sensor applications
898
Laser processing of sapphire with picosecond and sub-picosecond pulses
899
Laser processing of silicon at submicron scale using photochromic films
900
Laser processing of tungsten from WF6 and SiH4
901
Laser processing of yttria stabilised zirconia/alumina coatings on Fecralloy substrates
902
Laser produced functionally graded tungsten carbide coatings on M2 high-speed tool steel
903
Laser produced functionally graded tungsten carbide coatings on M2 high-speed tool steel
904
Laser produced plasmas in high fluence ablation of metallic surfaces probed by time-of-flight mass spectrometry
905
Laser production and deposition of light-emitting silicon nanoparticles
906
Laser production of B–Ni complex layers
907
Laser production of metal clusters in a supersonic beam and studies of their reactivity towards biological and inorganic systems
908
Laser profile changes due to photon–axion induced beam splitting
909
Laser profile changes due to photon–axion induced beam splitting
910
Laser prostatectomy in high-risk patients
911
Laser pulse control of exciton dynamics in a biological chromophore complex
912
Laser pulse control of exciton dynamics in the FMO complex: Polarization shaping versus effects of structural and energetic disorder
913
Laser pulse energy requirements for remote sensing of chlorophyll fluorescence
914
Laser pulse heating and flexural wave generation during treatment of metallic surfaces
915
Laser pulse heating and thermal stress developments: elastoplastic analysis
916
Laser pulse heating of gun bore coatings
917
Laser pulse induced micropatterning on sandwiched thin films
918
Laser pulse shape influence on optically induced dynamic processes
919
Laser pulse shaping for multi-bunches photoinjectors
920
Laser pulse shaping for multi-bunches photoinjectors
921
Laser pulse timing synchronization to an electron bunch for Compton scattering
922
Laser pulse timing synchronization to an electron bunch for Compton scattering
923
Laser pulsed welding in thin sheets of Zircaloy-4
924
Laser pulsing of field evaporation in atom probe tomography
925
Laser pyrolysis of carbon-nitrogen gas-phase compounds: An attempted approach to carbon nitride formation Original Research Article
926
Laser pyrolysis of polymers and its relation to polymer fire behaviour
927
Laser pyrolysis synthesis and characterization of luminescent silicon nanocrystals
928
Laser R2PI spectroscopic and mass spectrometric studies of chiral neurotransmitters
929
Laser radiation effect on the optical properties of a spherical quantum dot confined in a cylindrical nanowire
930
Laser radiation effects on impurity states in a spherical quantum dot
931
Laser Raman Characterization of Oxidized Re/γAl2O3 Catalysts: Effect of Calcination Temperature
932
Laser raman measurements of temperature and species concentration in swirling lifted hydrogen jet diffusion flames
933
Laser Raman microprobe analysis of graphite exposed to edge plasma in the TEXTOR tokamak
934
Laser Raman scattering measurements of differential molecular diffusion in turbulent nonpremixed jet flames of H2/CO2 fuel
935
Laser Raman spectroscopy as a technique for identification of seafloor hydrothermal and cold seep minerals
936
Laser range scanner based on self-calibration techniques using coplanarities and metric constraints
937
Laser ranging to the lost Lunokhod 1 reflector
938
Laser rapid forming of SS316L/Rene88DT graded material
939
Laser rapid forming of SS316L/Rene88DT graded material
940
Laser rapid manufacturing of Colmonoy-6 components
941
Laser rapid manufacturing on vertical surfaces: Analytical and experimental studies
942
Laser Rayleigh measurement of mixing processes and control of hydrogen combustion using quenching meshes
943
Laser Rayleigh measurement of mixing processes and control of hydrogen combustion using quenching meshes
944
Laser Rayleigh measurement of mixing processes and control of hydrogen combustion using quenching meshes Original Research Article
945
Laser reactive ablation deposition of silicon carbide films
946
Laser reactivity of NH3 on silicon: a laser multiphoton-ionisation mass spectrometry study
947
Laser recovery of machining damage under curved silicon surface
948
Laser Reduction Glottoplasty for Managing Androphonia After Failed Cricothyroid Approximation Surgery
949
Laser reflectometry in situ monitoring of InGaAs grown by atmospheric pressure metalorganic vapour phase epitaxy
950
Laser reflectometry: Examination of the influence of some assumptions and approximations to calculate the adsorption from the reflectometric signal
951
Laser refractive surgery in glaucoma patients
952
Laser re-melting of HVOF coating with WC blend: Thermal stress analysis
953
Laser remelting of plasma sprayed Al2O3 ceramic coatings and subsequent wear resistance
954
Laser remelting of plasma sprayed Al2O3 ceramic coatings and subsequent wear resistance
955
Laser remelting of plasma sprayed nanostructured Al2O3–TiO2 coatings at different laser power
956
Laser Remelting of Plasma Sprayed NiCrAlY and NiCrA1Y-A2O3 Coatings
957
Laser remote sensing of canopy habitat heterogeneity as a predictor of bird species richness in an eastern temperate forest, USA
958
Laser removal of contaminants from painted surfaces
959
Laser removal of loose uranium compound contamination from metal surfaces
960
Laser removal of lubricating oils from metal surfaces
961
Laser removal of micron contaminant colloidal refractory and poor laser absorption particles from super-smooth optical substrate
962
Laser removal of oxides from a copper substrate using Q-switched Nd:YAG radiation at 1064 nm, 532 nm and 266 nm
963
Laser removal of water repellent treatments on limestone
964
Laser resolidification of a Zn–3.37 wt.% Cu peritectic alloy
965
Laser resolidification of a Zn–3.37 wt.% Cu peritectic alloy
966
Laser resonance ionization mass spectrometry measurements of cesium in nuclear burn-up and sediment samples
967
Laser resonance studies of the interactions of metastable antiprotonic helium atomcules p4He+ with surrounding H2 molecules
968
Laser resurfacing procedures in dark-skinned patients
969
Laser safety monitoring considerations for the largest dam by means of the generalized three-point method
970
Laser scanning and digital outcrop geology in the petroleum industry: A review
971
Laser scanning confocal microscope (LSCM)-fluorescence spectral properties of Nile Red embedded in polystyrene film of different thickness
972
Laser scanning confocal microscopy of cervical tissue before and after application of acetic acid,
973
Laser scanning for the identification of repeatable landmarks of the ears and face
974
Laser scanning parameters on fabrication of ceramic parts by liquid phase sintering
975
Laser Scanning Speed Influences on Assessment of Laser Remelted Commercially Pure Titanium Grade 2
976
Laser scanning-based recognition of rotational movements on a deep seated gravitational instability: The Cinque Torri case (North-Eastern Italian Alps)
977
Laser scanning—surveying and mapping agencies are using a new technique for the derivation of digital terrain models
978
Laser schlieren measurement of vertical flow past a heated horizontal circular cylinder
979
Laser Scribed Graphene from Oil Palm Lignin for Supercapacitor Applications
980
Laser scribing of gallium doped zinc oxide thin films using picosecond laser
981
Laser scribing of indium tin oxide (ITO) thin films deposited on various substrates for touch panels
982
Laser scribing of polycrystalline thin films
983
Laser sealing of zirconia–yttria–alumina plasma sprayed coating
984
Laser sealing of zirconia–yttria–alumina plasma sprayed coating
985
Laser selective spectroscopy of europium complex embedded in colloidal silica spheres
986
Laser shadowgraphy measurements of abrasive particle spatial, size and velocity distributions through micro-masks used in abrasive jet micro-machining
987
Laser shaping of photonic materials: deep-ultraviolet and ultrafast lasers
988
Laser shearography for inspection of pipelines
989
Laser Sheet Dropsizing of dense sprays
990
Laser Shock Adhesion Test (LASAT) of EB-PVD TBCs: Towards an industrial application
991
Laser shock compression of copper and copper–aluminum alloys
992
Laser shock experiments with nanoseconds pulses: a new tool for the reproduction of shock defects in olivine
993
Laser shock experiments with nanoseconds pulses: a new tool for the reproduction of shock defects in olivine
994
Laser shock forming of aluminum sheet: Finite element analysis and experimental study
995
Laser shock microforming of thin metal sheets
996
Laser shock peening effect on the dislocation transitions and grain refinement of Al–Mg–Si alloy
997
Laser shock peening of Ti-17 titanium alloy: Influence of process parameters
998
Laser shock peening on fatigue behavior of 2024-T3 Al alloy with fastener holes and stopholes
999
Laser shock peening on fatigue behavior of 2024-T3 Al alloy with fastener holes and stopholes
1000
Laser shock peening on fatigue crack growth behaviour of aluminium alloy