Title List مقالات لاتين Study of Zn (II) extraction by 5-azidomethyl-8-hydroxyquinoline: Experiment and modelling Study on interaction between drug and membrane by using liposome coated zirconia–magnesia chromatography

بر اساس عنوان

1

Study of Zn (II) extraction by 5-azidomethyl-8-hydroxyquinoline: Experiment and modelling

2

Study of Zn diffusion in n-type GaSb by cathodoluminescence and scanning tunneling spectroscopy

3

Study of ZnO arrester model for steep front wave

4

Study of ZnO:Al films for silicon thin film solar cells

5

Study of ZnO-coated SnO2 nanostructures synthesized by a two-step process

6

Study of ZnSe powder mass depleted in temperature field

7

Study of zone center phonons in wolframite ZnWO4

8

Study of zoonotic bacteria in conventional laboratory mice breeding colonies

9

Study of ZrN layers deposited by reactive magnetron sputtering

10

Study of zwitterionic sulfopropylbetaine containing reactive siloxanes for application in antibacterial materials

11

Study of α1-Antitrypsin Phenotypes Frequencies in Patients with Primary Antibody Deficiency

12

Study of β-cyclodextrin/fluorinated trimethyl ammonium bromide surfactant inclusion complex by fluorinated surfactant ion selective electrode

13

Study of β-delayed 3-body and 5-body breakup channels observed in the decay of 11Li Original Research Article

14

Study of β-precipitates and their effect on the directional yield asymmetry of friction stir processed and aged AZ91C alloy

15

Study of γ precipitates induced by the stabilized stress-induced martensite (SSIM) training method in Cu–Zn–Al alloys

16

Study of η and η′ production in n̄p annihilations

17

Study of η-einstein soliton on α-sasakian manifold admitting schouten-van kampen connection

18

Study of Λ hypernuclei in the quark mean-field model Original Research Article

19

Study of Λ hypernuclei using hadron beams and γ-ray spectroscopy at J-PARC

20

Study of ΛΛ correlations and search for H-dibaryon with STAR detector at RHIC

21

Study of φ and f′2(1525) meson production in p̄p annihilation at rest

22

Study of ω-, η-, η′- and D−-mesic nuclei Original Research Article

23

Study ofanalysis of Fisheries Statistics in India

24

Study ofWireless Mesh Networks and WMN Architecture

25

Study on ‘pulse cavitation peak’ in an ultrasound reverberating field

26

Study on ‘pulse cavitation peak’ in an ultrasound reverberating field

27

Study on 1,3,4-thiadiazole derivatives as novel multifunctional oil additives

28

Study on 1.8 μm emission of Tm3 + doped GeS2–Ga2S3–CsCl glasses

29

Study on 3D spatial distribution of steel fibers in fiber reinforced cementitious composites through micro-CT technique

30

Study on 3D Visualized Technique for Coalbed Methane Integrated Surface and Underground Drainage in Mining Area

31

Study on a basic unit of a double-acting thermoacoustic heat engine used for dish solar power

32

Study on a Bessel–Gaussian beam laser

33

Study on a broad-area laser diode with external cavity feedback

34

Study on a catalytic membrane reactor for hydrogen production from ethanol steam reforming

35

Study on a charge-integrating operation mode of M-MSGC towards very fine-pitch MSGC

36

Study on a charge-integrating operation mode of M-MSGC towards very fine-pitch MSGC

37

Study on a compact methanol reformer for a miniature fuel cell

38

Study on a compact silica gel–water adsorption chiller without vacuum valves: Design and experimental study

39

Study on a concrete filled structure for nuclear power plants Original Research Article

40

Study on a dual-mode, multi-stage, multi-bed regenerative adsorption chiller

41

Study on a failed dip slope with a thin sandy layer in 2004 Niigata-ken Chuetsu Earthquake

42

Study on a fixed zeolite bioreactor for anaerobic digestion of ammonium-rich swine wastes

43

Study on a grid interface algorithm for solutions of incompressible Navier–Stokes equations

44

Study on a hidden protein-DNA binding in salmon sperm DNA sample by dynamic kinetic capillary isoelectric focusing Original Research Article

45

Study on a hybrid SVM model for chiller FDD applications

46

Study on a hydroxypropyl chitosan–gelatin based scaffold for corneal stroma tissue engineering

47

Study on a joint multiple layer restoration scheme for IP over WDM networks

48

Study on a lab-scale hydrogen production by closed cycle thermo-chemical iodine–sulfur process

49

Study on a large-scale discrete element model for fine particles in a fluidized bed

50

Study on a lateral-electrical-field pixel architecture for FLC spatial light modulator with continuously tunable grayscales

51

Study on a linear relationship between limited pressure difference and coil current of on/off valve and its influential factors

52

Study on a low loss, low voltage, polarization-independent EO modulator based LPG

53

Study on a low-cobalt Ml0.8Mg0.2Ni3.2Co0.3Al0.3 alloy

54

Study on a method of design for rural power distribution lines based on 3D GIS technology

55

Study on a method to induce freezing of supercooled solution using a membrane

56

Study on a micro-gas sensor with SnO2–NiO sensitive film for indoor formaldehyde detection

57

Study on a multi-effects regeneration and integral-type solar desalination unit with falling film evaporation and condensation processes

58

Study on a multifunctional crystal LiMnBO3

59

Study on a multifunctional energy system producing coking heat, methanol and electricity

60

Study on a new air-gap membrane distillation module for desalination Original Research Article

61

Study on a new computer path synthesis method of a four-bar linkage

62

Study on a new correlation between diffusion coefficient and temperature in porous building materials

63

Study on a new ejection-absorption heat transformer

64

Study on a new ejection–absorption heat transformer

65

Study on a new nonlinear parametric excitation equation: Stability and bifurcation

66

Study on a new structure of the separator plate assembly for molten carbonate fuel cell (MCFC) stacks

67

Study on a new technological scheme for cold forging of spur gears

68

Study on a new type of sealing – regeneration-labyrinth sealing for displacer in cryocoolers: Part I – Theoretical study Original Research Article

69

Study on a new type of sealing – regeneration-labyrinth sealing for displacer in cryocoolers: Part II – Experimental study Original Research Article

70

Study on a new, environmentally benign method and its feasibility of preparing nanometer zirconia powder

71

Study on a non-autonomous predator–prey system with Beddington–DeAngelis functional response

72

Study on a novel antifouling polyamide–urea reverse osmosis composite membrane (ICIC–MPD): III. Analysis of membrane electrical properties

73

Study on a novel catalytic reaction and its mechanism for CF3I synthesis

74

Study on a novel circulating cooling solid-phase microextraction method

75

Study on a novel composite membrane for treatment of sewage containing oil Original Research Article

76

Study on a novel double-layered composite membrane of Mg-substituted nano-hydroxyapatite/poly(l-lactide-co-ε-caprolactone): Effect of different l-lactide/ε-caprolactone ratios

77

Study on a novel emitter based on rhenium complex: Synthesis, molecular structure, photophysical feature and electroluminescence performance

78

Study on a novel flat renewal supported liquid membrane with D2EHPA and hydrogen nitrate for neodymium extraction

79

Study on a novel mixed Langmuir-Blodgett film based on a new asymmetrical tetrathiafulvalene/arachidic acid mixture

80

Study on a novel nanofiltration membrane prepared by interfacial polymerization with zwitterionic amine monomers O

81

Study on a novel non-dissolved redox mediator catalyzing biological denitrification (RMBDN) technology

82

Study on a novel photorefractive polymer containing carbazole and phthalocyanine (I) synthesis and characterization

83

Study on a novel polyamide-urea reverse osmosis composite membrane (ICIC–MPD): I. Preparation and characterization of ICIC–MPD membrane

84

Study on a novel polyamide-urea reverse osmosis composite membrane (ICIC-MPD): II. Analysis of membrane antifouling performance

85

Study on a novel polyampholyte nanocomposite superabsorbent hydrogels: Synthesis, characterization and investigation of removal of indigo carmine from aqueous solution Original Research Article

86

Study on a novel polyester composite nanofiltration membrane by interfacial polymerization of triethanolamine (TEOA) and trimesoyl chloride (TMC): I. Preparation, characterization and nanofiltration properties test of membrane

87

Study on a novel polyester composite nanofiltration membrane by interfacial polymerization. II. The role of lithium bromide in the performance and formation of composite membrane

88

Study on a novel POM-based magnetic photocatalyst: Photocatalytic degradation and magnetic separation

89

Study on a novel thermally driven air conditioning system with desiccant dehumidification and regenerative evaporative cooling

90

Study on a PCM heat storage system for rapid heat supply

91

Study on a piezoelectric micropump for the controlled drug delivery system

92

Study on a pseudo-simulated moving bed with solvent gradient for ternary separations

93

Study on a pulse tube cryocooler using gas mixture as its working fluid Original Research Article

94

Study on a pyrazine-modulated tetrapyridyltriamide and its complexes: Synthesis, structure and properties

95

Study on a reconfigurable model of an open CNC kernel

96

Study on a recovery of rare earth oxides from a LiCl–KCl–RECl3 system

97

Study on a re-heat two-stage adsorption chiller – The influence of thermal capacitance ratio, overall thermal conductance ratio and adsorbent mass on system performance

98

Study on a Rhenium(I) complex with oxadiazole-derived diamine ligand: Synthesis, characterization, photophysical property and luminescence response towards molecular oxygen

99

Study on a separation technology for more efficient utilization of pulverized coals in cement plants

100

Study on a star-shaped europium complex: Synthesis, photophysical properties and organoelectronic performances

101

Study on a Thermal-diffusivity Standard for Laser Flash Method Measurements

102

Study on a type of mesoporous silica humidity sensing material

103

Study on a waste heat-driven adsorption cooling cum desalination cycle

104

Study on a wire-type Joule Thomson microcooler with a concentric heat exchanger

105

Study on abrasive and erosive wear behaviour of Al 6063/TiB2 in situ composites

106

Study on absolute configurations of α/α′ chiral carbons of thiodiketopiperazines by experimental and calculated circular dichroism spectra

107

Study on absorption and transport of carbon in steel during gas carburizing with rare-earth addition

108

Study on absorption of Angelica sinensis in rabbit plasma by HPLC-DAD-MS and multicomponent spectral correlative chromatography

109

Study on absorption/desorption characteristics of a metal hydride tank for boil-off gas from liquid hydrogen

110

Study on AC losses of a conductive cooled HTS coil

111

Study on acetate ion recognition and sensing in aqueous media using a novel and simple colorimetric sensor and its analytical application

112

Study on achieving speech privacy using masking noise

113

Study on Acid-Base Balance Disorders and the Relationship Between Its Parameters and Creatinine Clearance in Patients with Chronic Renal Failure

114

Study on acidizing effect of β-cyclodextrin-PBTCA inclusion compound with sandstone

115

Study on acoustical properties of sintered bronze porous material for transient exhaust noise of pneumatic system

116

Study on acrylic resin/titania organic–inorganic hybrid materials prepared by the sol–gel process

117

Study on activated carbon derived from sewage sludge for adsorption of gaseous formaldehyde

118

Study on activities of vanadium (IV/V) doped TiO2(R) nanorods induced by UV and visible light

119

Study on Activity and Stability of Proteases from Bacillus Sp. Produced by Submerged Fermentation

120

Study on actuating voltage and switching time of a MOEMS optical switch

121

Study on Acute and Subchronic Toxicity, Cytotoxicity and In Vitro Developmental Toxicity of Safflower Extracts of “IL 111” and “LRV 51 51” Cultivars

122

Study on Acute Leukemia in Iraqi Population

123

Study on acyl migration in immobilized lipozyme TL-catalyzed transesterification of soybean oil for biodiesel production

124

Study on acyl migration kinetics of partial glycerides: Dependence on temperature and water activity

125

Study on adhesion resistance behavior of sample with striated non-smooth surface by laser processing technique

126

Study on adsorption and desorption of urea in lignosulfonate with molecular simulations

127

Study on adsorption and reaction mechanism of preparation of TiO2/SiO2 by adsorption phase reactor technique

128

Study on adsorption behavior of crosslinked cationic starch maleate for chromium(VI)

129

Study on adsorption behavior of volatile and semivolatile organic vapors to air-dry soils based on QSPR methods

130

Study on adsorption of Cu(II) by water-insoluble starch phosphate carbamate

131

Study on adsorption of methanol onto carbon based adsorbents

132

Study on adsorption of NOx over CoH-FBZ by temperature-programmed desorption technique

133

Study on adsorption of O2 on LaFe1−xMgxO3 (0 1 0) surface by density function theory calculation

134

Study on adsorption performance of conjugated microporous polymers for hydrogen and organic solvents: The role of pore volume

135

Study on adsorption refrigeration cycle utilizing activated carbon fibers. Part 1. Adsorption characteristics

136

Study on adsorption refrigeration cycle utilizing activated carbon fibers. Part 2. Cycle performance evaluation

137

Study on advanced multilayered magnetostrictive thin film coating techniques for MEMS application

138

Study on Aerobic Bacterial flora in Canine abortions

139

Study on Aeromonas spp. Isolated from raw and drinking water in Baghdad city

140

Study on aerosol deposition in the piteas vessel by settling, thermophoresis and diffusiophoresis phenomena

141

Study on affecting factors and standard of rural household energy consumption in China

142

Study on ageing and creep of Al–0.1Zr alloy

143

Study on ageing/fouling phenomena and the effect of upstream nanofiltration on in-situ product recovery of n-butanol through poly[1-(trimethylsilyl)-1-propyne] pervaporation membranes

144

Study on age-related bioaccumulation of some heavy metals in the soft tissue of rock oyster (Saccostrea cucullata) from Laft Port – Qeshm Island, Iran

145

Study on Agglomeration and Densification Behaviors of Gadolinium-Doped Ceria Ceramics

146

Study on airflow characteristics inside and outside a cross-ventilation model, and ventilation flow rates using wind tunnel experiments

147

Study on Al2O3 content and phase stability of aluminous-CaSiO3 perovskite at high pressure and temperature

148

Study on alantolactoneinduced differentiation of mesenchymal stem cells into vascular cells

149

Study on allelopathic effect of Moringa oleifera on the growth and productivity of mungbean

150

Study on allelopathic effect of Moringa oleifera on the growth and productivity of mungbean

151

Study on Aluminium (Al) bioaccumulation in water, sediment, and fishes (Labeo rohita, Hypophthalmichthys molitrix, and Oreochromis niloticus) collected from River Sutlej, Pakistan

152

Study on aluminum phosphate binder and related Al2O3–SiC ceramic coating

153

Study on aluminum phosphate binder and related Al2O3–SiC ceramic coating

154

Study on ambient concentrations of PM10, PM10–2.5, PM2.5 and gaseous pollutants. Trace elements and chemical speciation of atmospheric particulates

155

Study on amino-functionalized multiwalled carbon nanotubes

156

Study on Ampere-Turns of superconducting dipole and quadrupole magnets based on sector coils

157

Study on Ampere-Turns of superconducting dipole and quadrupole magnets based on sector coils

158

Study on amperometric sensing performance of a crown-shaped phosphotungstate-based multilayer film

159

Study on an activated carbon fiber–ethanol adsorption chiller: Part I – system description and modelling

160

Study on an activated carbon fiber–ethanol adsorption chiller: Part II – performance evaluation

161

Study on an advanced adsorption desalination cycle with evaporator–condenser heat recovery circuit

162

Study on an after-laying test for a long-distance GIL

163

Study on an antiwear and extreme pressure additive of surface coated LaF3 nanoparticles in liquid paraffin

164

Study on an automatic multi-pin insertion system for preparing Z-pin composite laminates

165

Study on an automatic sorting system for Date fruits

166

Study on an end milling generation surface model and simulation taking into account of the main axle’s tolerance

167

Study on an Existing PV/Wind Hybrid System Using Biomass Gasifier for Energy Generation

168

Study on an Explosion Treated Steel Weld Metal with Prepared Crack

169

Study on an improved Hausdorff distance for multi-sensor image matching

170

Study on an improved MWECR CVD system and preparation of silicon-substrate thin films

171

Study on an inertial electrostatic confinement fusion as a portable neutron source

172

Study on an intense dust storm over Greece

173

Study on an internal gear with asymmetric involute teeth

174

Study on an iron–manganese Fischer–Tropsch synthesis catalyst prepared from ferrous sulfate

175

Study on an iron–nickel bimetallic Fischer–Tropsch synthesis catalyst

176

Study on an Online Vibration Measurement System for Seismic Waves Caused by Blasting for Mining in Vietnam

177

Study on an ozone episode in hot season in Hong Kong and transboundary air pollution over Pearl River Delta region of China

178

STUDY ON AN S-BAND RECTENNA ARRAY FOR WIRELESS MICROWAVE POWER TRANSMISSION

179

Study on anaerobic ammonium oxidation process coupled with denitrification microbial fuel cells (MFCs) and its microbial community analysis

180

Study on anaerobic and aerobic degradation of different non-ionic surfactants

181

Study on anaerobic digestion treatment of hazardous colistin sulphate contained pharmaceutical sludge

182

Study on anaerobic treatment of hazardous steel-mill waste rolling oil (SmWRO) for multi-benefit disposal route

183

Study on analysis and characterization methods for ash material from incineration plants

184

Study on analysis of crystal structure in CeO2 doped with Er2O3 or Gd2O3

185

Study on analytical prediction of forced convective CHF based on multi-fluid model Original Research Article

186

Study on anesthetic effects of Ketamine and Acepromazine in Tor grypus

187

Study on aneuploidy and p53 mutations in astrocytonias

188

Study on anhydrite plaster from waste phosphogypsum for use in polymerised flooring composition

189

Study on anisotropy of effective diffusion coefficient and activation energy for deuterated water in compacted sodium bentonite

190

Study on anisotropy of growth rate of ice crystal in supercooled water

191

Study on annihilation behavior of γ-ray induced defects in Li2O

192

Study on anodic oxidation of magnesium in 6 M KOH solution by alternative current impedance

193

Study on anomalous magnetoresistance in nano-Fe3O4/Ag granular system

194

Study on Anomaly Characteristics of In-Advance DC Detection of Water-Accumulating Gob in Abandoned Mines

195

Study on anti inflammatory effect of scorpion (Mesobuthus eupeus) venom in adjuvant-induced arthritis in rats

196

Study on anti inflammatory effect of scorpion (Mesobuthus eupeus) venom in adjuvant-induced arthritis in rats

197

Study on anti-androgenic effects of bisphenol a diglycidyl ether (BADGE), bisphenol F diglycidyl ether (BFDGE) and their derivatives using cells stably transfected with human androgen receptor, AR-EcoScreen

198

Study on antibacterial activity of O-carboxymethyl chitosan sodium salt and spinnability of O-carboxymethyl chitosan sodium salt/cellulose polyblends in N-methylmorpholine-N-oxide system

199

Study on antibacterial effect of thyme and peppermint aqueous extracts on Staphylococcus aureus and Escherichia coli strains causing mastitis in camels

200

Study on antibacterial O-carboxymethylated chitosan/cellulose blend film from LiCl/N, N-dimethylacetamide solution

201

Study on anti-bacterial potentials of some Malaysian brown seaweeds

202

Study on antibacterial starch/chitosan blend film formed under the action of irradiation

203

Study on antibiotic resistance and phylogenetic comparison of avian-pathogenic Escherichia coli (APEC) and uropathogenic Escherichia coli (UPEC) isolates

204

Study on Anticancer Activity of 4, 4'-[1,4-phenylenebis(1,3,4- thiadiazole-5,2-diyl)] bis(azaneylylidene) bis(methaneylylidene) diphenolon Breast Cancer Cells

205

Study on Anticardiolipin Antibodies in Women With Recurrent Abortion in Duhok Province, Kurdistan Region, Iraq

206

Study on Anticorrosive Cerium Conversion Coating of Cf/6061Al Composite Surface

207

Study on antidiabetic activity of wheat and barley starch using asymmetrical flow field-flow fractionation coupled with multiangle light scattering

208

Study on anti-emission materials for non-emitting grid applications in microwave power tubes

209

Study on Anti-Hepatitis B Surface Antibody Titer and Specific Interferon Gamma Response Among Dentists

210

Study on antimicrobial activity of chitosan with different molecular weights

211

Study on antimicrobial effects of Olea europaea (Olive) and olive leaf extracts on pathogenic bacteria using Taguchi methodology

212

Study on antimony oxide self-assembled inside HZSM-5

213

Study on Antinociceptive Activity of Different Extracts of Peganum Harmala and Possible Mechanism of Action

214

Study on antioxidant activity of certain plants in Thailand: Mechanism of antioxidant action of guava leaf extract

215

Study on antioxidant activity of common dry fruits

216

Study on Antiphospholipid/Anticardioliplin Antibodies in Women With Recurrent Abortion

217

Study on Application of Arps Decline Curves for Gas Production Forecasting in Senegal

218

Study on application of CeO2 and CaCO3 nanoparticles in lubricating oils

219

Study on application of membrane reactor in direct synthesis DMC from CO2 and CH3OH over Cu–KF/MgSiO catalyst

220

Study on application of PTFE, FEP and PFA fluoropolymers on radiation dosimetry

221

Study on application of PTFE, FEP and PFA fluoropolymers on radiation dosimetry

222

Study on application of some organic matters and drought stress on agronomic traits and yield of lemon balm (Melissa officinalis)

223

Study on Application of Two Different Magnetic Materials in Rotor of Cylindrical Synchronous Generator to Produce Reluctance Torque

224

Study on appropriate and modified conditions for flash sintering process by simulation modeling

225

Study on Artificial Neural Network Method for Ground Subsidence Prediction of Metal Mine

226

Study on as-cast microstructures and solidification process of Mg–Zn–Y Alloys

227

Study on ascitic fluid protein level in cirrhotic patients with spontaneous bacterial peritonitis

228

Study on ash deposition under oxyfuel combustion of coal/biomass blends

229

Study on ash fusion temperature using original and simulated biomass ashes

230

Study on assembly pressure of molten carbonate fuel cells based on in-situ sintered model

231

Study on association of cutaneous tuberculosis with pulmonary tuberculosis

232

Study on Association of Peroxisome Proliferator-Activated Receptor α with C-Reactive Protein, and Additional Gene–Gene Interaction in Chinese Han

233

Study on Association of Single Nucleotide Polymorphism of MC3R and MC4R Genes with Carcass and Meat Quality Traits in Chicken

234

Study on ASTM E399 and ASTM E1921 standards

235

Study on ASTM Shear-loaded Adhesive Lap Joints

236

Study on atmospheric plasma spraying of Al2O3 using on-line particle monitoring

237

Study on atom diffusion under the treatment by pulse current heating

238

Study on Attapulgite as Drilling Fluid Clay Additive in Persian Gulf Seawater

239

Study on Attenuation Characteristics of Reissner’s Membrane Mode in Cochlea

240

STUDY ON BACILLARIOPHYCEAE PHYLUM CHANGES IN SOUTHERN CASPIAN SEA

241

STUDY ON BACKPAIN AND THE CONTRIBUTING FACTORS AMONG WORKERS IN AUTOMOTIVE INDUSTRY

242

Study on backwash wastewater from rapid sand-filter by monolith ceramic membrane Original Research Article

243

Study on BaCo0.7Fe0.2Nb0.1O3−δ—SDC composite cathodes for intermediate temperature solid oxide fuel cell

244

Study on bacteria adherence properties of Mo surface-modified layer in Ti6Al4V alloy prepared by plasma surface alloying technique

245

Study on Bacteria Associated with White Coats of Healthcare Workers in Two Tertiary Hospitals, Mashhad, Iran

246

Study on Bacterial Strains Causing Blood and Urinary Tract Infections in the Neonatal Intensive Care Unit and Determination of Their Antibiotic Resistance Pattern

247

Study on bacteriolytic process with quartz crystal impedance system

248

Study on ballistic penetration resistance of titanium alloy TC4, Part II: Numerical analysis

249

Study on Band Structure of YbB6 and Analysis of Its Optical Conductivity Spectrum

250

Study on Bandwidth of 2-D Dielectric PBG Material

251

Study on BaO-Sm2O3-TiO2 Microwave Dielectric Ceramics Doped with Bismuth and Zinc

252

Study on Baseflow Separation of quot;Abolabas River” Using ADUKIH and RDF Methods

253

Study on basic parameters of scroll fluid machine based on general profile

254

Study on beam geometry and image reconstruction algorithm in fast neutron computerized tomography at NECTAR facility

255

Study on beam geometry and image reconstruction algorithm in fast neutron computerized tomography at NECTAR facility

256

Study On Behavior an‎d Breakup Process Of Oil Jet Ejected From Curved Pipe

257

Study on behavior of alkalescent fiber FFA-1 adsorbing glyphosate from production wastewater of glyphosate

258

Study on behavior of plasma nitrided 316L in PEMFC working conditions

259

Study on behavior of soil reinforcing pile in piled raft systems

260

Study on behavior of tritium in concrete wall

261

Study on Bending Damage of Intra-Ply Basalt/Nylon Hybrid Composites

262

Study on bending fretting fatigue damages of 7075 aluminum alloy

263

Study on benefit transfer in an international setting. How to improve welfare estimates in the case of the countriesʹ income heterogeneity?

264

Study on Bernoulli scheduling, customers priority shift in busy state, intolerance of customers in working vacation, complete vacation in a M/M/1/∞ model

265

Study on bi-direction pedestrian flow using cellular automata simulation

266

Study on bioaccumulation of heavy metals (cadmium, nickel, zinc and lead) in the muscle of wels catfish (Silurus glanis) in the Anzali Wetland

267

Study on bioadsorption and biodegradation of petroleum hydrocarbons by a microbial consortium

268

Study on bioaerosol emissions from aeration treatment facilities of hospital wastewater

269

Study on biodegradable polymer. 3. Synthesis and characterization of poly(DL-lactic acid)-co-poly(ethylene glycol)-co-poly(L-lysine) copolymer

270

Study on biodegradable polymers: synthesis and characterization of poly(DL-lactic acid-co-l-lysine) random copolymer

271

Study on biodegradation of Mazut by newly isolated strain Enterobacter cloacae BBRC10061: improving and kinetic investigation

272

Study on biodegradation of the second phase Mg17Al12 in Mg–Al–Zn Alloys: In vitro experiment and thermodynamic calculation

273

Study on biogas premixed charge diesel dual fuelled engine

274

Study on biogas production by anaerobic digestion of garden-waste

275

Study on biological contaminant control strategies under different ventilation models in hospital operating room

276

Study on biological variation of haemostatic parameters in clinically healthy dogs

277

Study on biomethonization of waste water from jam industries

278

Study on biomimetic preparation of shell surface microstructure for ship antifouling

279

Study on biosorption kinetics and thermodynamics of uranium by Citrobacter freudii

280

Study on biotribological properties of UHMWPE grafted with MPDSAH

281

Study on Blast Pressure Resistance of Foamed Concrete Material

282

Study on blood constitutive parameters in different blood constitutive equations

283

Study on boiling heat transfer in liquid saturated particle bed and fluidized bed

284

Study on boiling heat transfer of water–TiO2 and water–MWCNT nanofluids based laminar jet impingement on heated steel surface

285

Study on Bond Strength of Alccofine Based Normal and High Strength Concrete

286

Study on Bond Strength of Bonded Gray Cast Iron

287

Study on borate glass system containing with Bi2O3 and BaO for gamma-rays shielding materials: Comparison with PbO

288

Study on boron depth profiles in boron-doped diamond films by broad resonance reaction 11B(p, α)8Be at Ep=660 keV

289

Study on boron depth profiles in boron-doped diamond films by broad resonance reaction 11B(p, α)8Be at Ep=660 keV

290

Study on both discharge and charging of the earthed atomizing corona discharge and the influence of magnetic fields on them

291

Study on boundary–boundary correlation functions in the transverse Ising chain and XY chain

292

Study on brainstem auditory evoked potentials in diabetes mellitus

293

Study on brazing of TiNi shape memory alloy with stainless steels

294

Study on Breakup of Conical Liquid Sheet under Varying Flow Conditions

295

Study on Breast Cancer Detection Using Computer Systems

296

Study on Breast Shape Changing in Various Body Positions Using Depth Camera13

297

Study on bubble dynamics for pool nucleate [International Journal of Heat and Mass Transfer 43 (2000) 203-208]

298

Study on bubble dynamics for pool nucleate boiling

299

Study on bubble formation in non-Newtonian fluids by laser image technique

300

Study on buckling of steel cylindrical shells with an elliptical cutout under combined loading

301

Study on building plan for enhancing the social health of public apartments

302

Study on bulk aluminum matrix nano-composite fabricated by ultrasonic dispersion of nano-sized SiC particles in molten aluminum alloy

303

Study on bulk aluminum matrix nano-composite fabricated by ultrasonic dispersion of nano-sized SiC particles in molten aluminum alloy

304

Study on bulk aluminum matrix nano-composite fabricated by ultrasonic dispersion of nano-sized SiC particles in molten aluminum alloy

305

Study on burr formation in micro-machining using micro-tools fabricated by micro-EDM

306

Study on Ca8Mg(SiO4)4 Cl2:Eu2+ Doped with Sr2+

307

Study on CaCO3/PMMA nanocomposite microspheres by soapless emulsion polymerization

308

Study on calcination of bi-layered films produced by anodizing iron in dimethyl sulfoxide electrolyte

309

Study on Calculation Method of Minimum Non-Zero Total Float in CPM Network.

310

Study on capacity optimization of PEM fuel cell and hydrogen mixing gas-engine compound generator

311

Study on capillary electrophoresis–amperometric detection profiles of different parts of Morus alba L.

312

Study on capture radius and efficiency of fine weakly magnetic minerals in high gradient magnetic field

313

Study on car shampoo formulation using D-optimal statistical design

314

Study on carbon deposition associated with catalytic CH4 reforming by using density functional theory

315

Study on carbon nanotube reinforced phenol formaldehyde resin/graphite composite for bipolar plate

316

Study on carbon–hydrogen activation of ketones by Gold(III) complexes and the synthesis and characterization of two ketonylgold(III) complexes

317

Study on carbonization of lignin by TG-FTIR and high-temperature carbonization reactor

318

Study on Catalysis of Cu-Fe Metal Composite Oxides to Thermal Decomposition Behavior of Bluestone

319

Study on Catalysts with Rhodium Loading on Different Cerium-Zirconium Mixed Oxides

320

Study on Catalytic and Photocatalytic Decontamination of (2-Chloroethyl) Phenyl Sulfide with Nano-TiO2

321

Study on catalytic combustion of benzene over cerium based catalyst supported on cordierite

322

Study on catalytic hydrogenation properties and thermal stability of amorphous NiB alloy supported on carbon nanotubes

323

Study on catalytic performance and attrition strength of the Ruhrchemie catalyst for the Fischer–Tropsch synthesis in a stirred tank slurry reactor Original Research Article

324

Study on Catalytic Synthesis of Azodicarbonamide with Hydrogen Peroxide as a Green Oxidant

325

Study on Catalytic Synthesis of Azodicarbonamide with Hydrogen Peroxide as a Green Oxidant

326

Study on cation recognition properties of 4-methene6,7-dimethoxycoumarin-monoaza-18-crown-6

327

Study on cation recognition properties of 4-methene-6,7-dimethoxycoumarin-monoaza-18-crown-6 Original Research Article

328

Study on cationic polymerization of isobutylene using electrochemical method

329

Study on Cavitation Characteristics of Rotating-Sleeve Flow Distribution System

330

Study on Cavitation Characteristics of Rotating-Sleeve Flow Distribution System

331

Study on cellulose acetate membranes for reverse osmosis and polyethersulfone membranes for ultrafiltration by electron spin resonance technique Original Research Article

332

Study on centre-fed boundless track circuits

333

Study on ceramic cutting by plasma arc

334

Study on ceria-modified SnO2 for CO and CH4 oxidation

335

STUDY ON CERTAIN SUBCLASSES OF ANALYTIC FUNCTIONS

336

Study on chain end structures of polypropylenes prepared with different symmetrical metallocene catalysts

337

Study on Change in Modal Parameters of RC Beams Due to Fatigue Type Damage

338

Study on change in SIMS intensities near the interface between silicon-nitride film and silicon substrate

339

Study on change in value of ecosystem service function of Tarim River

340

Study on changes in some physiological parameters due to presence of visitors at the bedside of patients admitted to coronary care unit at Ali-ibn Abi Talib Hospital of Rafsanjan, Iran, in 2013

341

Study on changes in the structure of HfSiO and HfSiON dielectrics with different annealing temperature by photoelectron spectroscopy

342

Study on chaos induced by turbulent maps in noncompact sets

343

Study on chaos synchronization in the Belousov–Zhabotinsky chemical system

344

Study on char deposition characteristics on the heat exchanger tube in a coal gasifier—relationship between char formation and deposition characteristics

345

Study on character of interactions between Cu(I) and Ag(I) chelates with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol and (neutral, anionic) micelles. Chelates of Cu(I) and Ag(I) as new micellar probes

346

Study on characteristics of biocometabolic removal of omethoate by the Aspergillus spp

347

Study on characteristics of Ni-W-B composites containing CeO2 nano-particles prepared by pulse electrodeposition

348

STUDY ON CHARACTERISTICS OF POLLUTANT RUNOFF INTO LAKE BIWA, JAPAN

349

STUDY ON CHARACTERISTICS OF POLLUTANT RUNOFF INTO LAKE BIWA, JAPAN

350

Study on characteristics of vapor–liquid two-phase flow in mini-channels

351

STUDY ON CHARACTERIZATION OF HORIZONTAL CRACKS IN ISOTROPIC BEAMS

352

Study on characterization of hot deformation of 403 steel

353

Study on cheliceral sensilla of the brown dog tick Rhipicephalus sanguineus (Latreille, 1806) (Acari: Ixodidae) involved in taste perception of phagostimulants

354

Study on Chemical Composition of Essential Oil in Cotinus coggygria Scop (Smoke Tree) from Iran.

355

Study on chemical composition, anti-inflammatory and anti-microbial activities of extracts from Chinese pear fruit (Pyrus bretschneideri Rehd.)

356

Study on chemical composition, antioxidant and anti-inflammatory activities of hot water extract from Picea mariana bark and its proanthocyanidin-rich fractions

357

Study on Chemical Durability of BAP System Glass Doped with Rare Earths

358

Study on chemical synthetic method to prepare Mg2Ni hydrogen absorbing alloy

359

Study on child labour in automobile workshops of Peshawar, Pakistan

360

Study on Chinaʹs low carbon development in an Economy–Energy–Electricity–Environment framework

361

Study on chiral resolution of three beta-blockers by affinity electrokinetic chromatography

362

Study on chlorination of molybdenum trioxide mixed with carbon black

363

Study on chlorine removal from mixture of waste plastics

364

Study on Chronic Low-Grade Inflammation and Influential Factors of Polycystic Ovary Syndrome

365

Study on clamping method for paper honeycomb based on magnetic field and friction principle

366

study on clopidogrel in inhibition of platelet aggregation in suspected angina patients, treated with a daily dose of 75 mg of clopidogrel for 7 days

367

Study on cloud-dust based intelligent maximum performance analysis system for power generation with solar energy

368

Study on CO global recycling system

369

Study on CO2 gasification properties and kinetics of biomass chars and anthracite char

370

Study on CO2 gasification reactivity and physical characteristics of biomass, petroleum coke and coal chars

371

Study on CO2 gasification reactivity of chars obtained from Soma-Isıklar lignite (Turkey) at various coking temperatures

372

Study on CO2 removal in air by hydrogel membranes Original Research Article

373

Study on coal bio-magnetizing desulphurization

374

Study on coal chars combustion under O2/CO2 atmosphere with fractal random pore model

375

Study on coal combustion characteristics in a W-shaped boiler furnace

376

Study on coal gasification with soot formation in two-stage entrained-flow gasifier

377

Study on coal liquefaction characteristics of Chinese coals

378

Study on coalface stray current safety early warning based on ANFIS

379

Study on coastal wetland habitat quality evaluation in Quanzhou Bay, Fujian, China

380

Study on co-feed and co-production system based on coal and natural gas for producing DME and electricity

381

Study on cold metal transfer welding–brazing of titanium to copper

382

Study on co-liquefaction of coal and bagasse by factorial experiment design method

383

Study on column SPE with synthesized graphene oxide and FAAS for determination of trace amount of Co(II) and Ni(II) ions in real samples

384

Study on combined heat loss of a dish receiver with quartz glass cover

385

Study on combustion and ignition characteristics of natural gas components in a micro flow reactor with a controlled temperature profile

386

Study on combustion behaviors and cycle-by-cycle variations in a turbocharged lean burn natural gas S.I. engine with hydrogen enrichment

387

Study on combustion mechanism of asphalt binder by using TG–FTIR technique

388

Study on combustion mode transition of hydrogen fueled dual-mode scramjet engine based on thermodynamic cycle analysis

389

Study on combustion of gasoline/MTBE in laminar flame with synchrotron radiation Original Research Article

390

Study on Combustion Performance of Palm Oil Biodiesel Blend

391

Study on comparison of reducing ability of three organic hydride compounds

392

Study on compatibility of cement–superplasticiser assisted by multicriteria statistical optimisation

393

Study on Competitive Adsorption and Displacing Properties of CO2 Enhanced Shale Gas Recovery: Advances and Challenges

394

Study on complexing behavior of the syndiotactic polystyrene-aromatic hydrocarbon system Original Research Article

395

Study on Component Synthesis Active Vibration Suppression Method Using Zero-placement Technique

396

Study on composite membranes with high selective permeance properties

397

Study on composition and abundance of zooplankton assemblages in Egirdir Lake (Isparta, Turkey)

398

Study on composition, structure and formation process of nanotube Na2Ti2O4(OH)2

399

Study on Compression and Flexural Behavior of ABS-SiO2 Polymer Matrix Composite Fabricated by Hot Extrusion

400

Study on compression deformation, damage and fracture behavior of TiAl alloys: Part I. Deformation and damage behavior

401

Study on compression deformation, damage and fracture behavior of TiAl alloys: Part II. Fracture behavior

402

Study on compression forming of a rotating disk considering hybrid friction

403

Study on Compressive and Compatibility Properties of Titanium Functionally Graded Scaffolds as Bone Replacements

404

Study on compressive mechanical capabilities of concrete after high temperature exposure and thermo-damage constitutive model

405

Study on Compressive Properties of Z-pinned Laminates in RTD and Hygrothermal Environment

406

Study on concentrating primary reverse osmosis retentate by direct contact membrane distillation Original Research Article

407

Study on concentration of aqueous sulfuric acid solution by multiple-effect membrane distillation Original Research Article

408

Study on concentric tube heat exchanger heat transfer performance using Al2O3 – water based nanofluids

409

Study on concrete-filled stainless steel–carbon steel tubular (CFSCT) stub columns under compression

410

Study on condensation heat transfer characteristics of wet paper in steam heating process

411

Study on conductivity and redox stability of iron orthovanadate

412

Study on conductivity property and microstructure of TritonX-100/alkanol/n-heptane/water microemulsion

413

Study on conductor configuration of 500 kV Chang-Fang compact line

414

STUDY ON CONFORMAL FDTD FOR ELECTROMAGNETIC SCATTERING BY TARGETS WITH THIN COATING

415

Study on conformational transition of EVA random copolymer in selective solvent mixtures

416

Study on conical columns with different conical angles for semi-preparative liquid chromatography

417

Study on Connectivity Performance of Granule Considering Granule Morphology

418

Study on consolidated activated carbon: Choice of optimal adsorbent for refrigeration application

419

Study on constitutive relation of AISI 4140 steel subject to large strain at elevated temperatures

420

Study on constitutive relationships and processing maps for FGH96 alloy during two-pass hot deformation

421

Study on constraints for heat removal duties of the main fractionator in delayed coking units

422

Study on construction and quantification of evaluation index system of mine ventilation system

423

Study on containment safety systems for Korean fusion DEMO plant

424

Study on contamination control in a minienvironment inside clean room for yield enhancement based on particle concentration measurement and airflow CFD simulation

425

Study on contamination of projection optics surface for extreme ultraviolet lithography

426

Study on Contemporary Interventions in the Historical Fabric of Mashhad

427

Study on Contemporary Interventions in the Historical Fabric of Mashhad

428

Study on continuous (254 nm) and pulsed UV (266 and 355 nm) lights on BVD virus inactivation and its effects on biological properties of fetal bovine serum

429

Study on continuous ice slurry formation using functional fluid for ice storage – Discussion of optimal operating conditions

430

Study on continuous network design problem using simulated annealing and genetic algorithm

431

Study on continuous network design problem using simulated annealing and genetic algorithm

432

Study on control method of natural circulation by injection of helium gas

433

Study on control method of the stand-alone direct-coupling photovoltaic – Water electrolyzer

434

Study on Control of First Order Plus Delay Using Smith Predictor

435

Study on control of oxygen concentration in lead–bismuth flow using lead oxide particles

436

Study on controlled free-radical polymerization in the presence of 2-cyanoprop-2-yl 1-dithionaphthalate (CPDN)

437

Study on controlled/living free-radical polymerization of methyl acrylate in the presence of benzyl 9H-carbazole-9-carbodithioate under thermal condition

438

Study on controlling thermal expansion coefficient of ZrO2–TiO2 ceramic die for superplastic blow-forming high accuracy Ti–6Al–4V component

439

Study on convergence and stability of a conservative difference scheme for the generalized Rosenau-KdV equation

440

Study on coolability of melt pool with different strategies

441

Study on Coordination and Optimization of Contract Farming Supply Chain Based on Uncertain Conditions

442

Study on coordination of selenoamino acids with Ag+ at silver nitrate-modified carbon paste electrode

443

Study on Co-placement of Coal Combustion Ash-coal Waste Rock for Minimizing Acid Mine Drainage Generation: A Preliminary Result of Field Column Test Experiment

444

Study on co-precipitation synthesized Y3Al5O12:Ce yellow phosphor for white LED

445

Study on co-pyrolysis characteristics of rice straw and Shenfu bituminous coal blends in a fixed bed reactor

446

Study on cord/rubber interface at elevated temperatures by H-pull test method

447

Study on core–shell–shell structured nanoparticles with magnetic and luminescent features: Construction, characterization and oxygen-sensing behavior

448

Study on Corn yield and yield component at different levels of Nitrogen intercropping Corn – Soybean

449

STUDY ON CORRELATION OF DATA FROM YIELD MONITORING SYSTEM AND HAND SAMPLES

450

STUDY ON CORROSION BEHAVIOR OF COBALT NANO COMPOSITE COATINGS

451

Study on corrosion behavior of continuous bulk metallic glass-coated steel wire composite

452

Study on corrosion properties of pipelines in simulated produced water saturated with supercritical CO2

453

Study on corrosion properties of sputter coating of oxides on stainless steels

454

Study on corrosion properties of sputter coating of oxides on stainless steels

455

Study on corrosion resistance of the BTESPT silane cooperating with rare earth cerium on the surface of aluminum-tube

456

Study on cottonseed oil as a partial substitute for diesel oil in fuel for single-cylinder diesel engine

457

Study on coupling and coupling correction for the SOLEIL ring

458

Study on coupling and coupling correction for the SOLEIL ring

459

Study on crack generation at root of socket welds Original Research Article

460

Study on crack propagation behavior in a quenched glass plate

461

Study on crack propagation in ferroelectric single crystal under electric loading Original Research Article

462

Study on creep properties of indica rice gel Original Research Article

463

Study on creep-fatigue failure prediction methods for type 304 stainless steel Original Research Article

464

Study on cross section of high temperature superconducting coil Original Research Article

465

Study on cross-section clad profile in coaxial single-pass cladding with a low-power laser

466

Study on Cross-shaped Concrete Filled Steel Tubular Stub Columns Subjected to Axial Compression: Experiments and Design Method

467

Study on Cryo-preservation of Theileria annulata Schizont Infected Cell Line Vaccine Strain S15

468

Study on cryorolled Al–Cu alloy using X-ray diffraction line profile analysis and evaluation of strengthening mechanisms

469

Study on crystal structures of enzyme-hydrolyzed cellulosic materials by X-ray diffraction

470

Study on crystal transformation process of magnesium carbonate hydrate based on salt lake magnesium resource utilization

471

Study on crystalline morphology of poly(l-lactide)-poly(ethylene glycol) diblock copolymer

472

Study on crystalline properties of Er–Si–O compounds in relation to Er-related 1.54 μm photoluminescence and electrical properties

473

Study on crystalline to amorphous structure transition of Cr coatings by magnetron sputtering

474

Study on crystallization and microstructure for new series of Al–Sn–Si alloys

475

Study on crystallization and microstructure for new series of Al–Sn–Si alloys

476

Study on crystallization kinetics of Al65Cu20Ti15 amorphous alloy

477

Study on crystallization of hydrogenated nanocrystalline silicon carbon films

478

Study on crystallization of hydrogenated nanocrystalline silicon carbon films

479

Study on crystallization, thermal stability and hole transport properties of conjugated polyazomethine materials containing 4,4′-bisamine-triphenylamine

480

Study on Cu valence state in Cu-doped barium sodium niobate

481

Study on Cu2S mineral surface modification by low temperature Ar/O2 plasmas

482

Study on CuO–BaTiO3 semiconductor CO2 sensor

483

Study on cure reaction of the blends of bismaleimide and dicyanate ester

484

Study on curing kinetics of diallyl-bearing epoxy resin using sulfur as curing agent

485

Study on curing mechanism of DGEBA/nickel–imidazole system

486

Study on Current "Religious Fever" Phenomenon of China

487

Study on current efficiency of steam electrolysis using a partial protonic conductor SrZr0.9Yb0.1O3−α

488

Study on CxN and CxS with disordered carbon structure as the anode materials for secondary lithium batteries

489

Study on cyclic deformation behavior of extruded Mg–3Al–1Zn alloy

490

Study on cycling performances of lithium-ion polymer cells assembled by in situ chemical cross-linking with star-shaped siloxane acrylate

491

Study on damage bifurcation and instability of rock-like materials

492

Study on damage process and hydrogen effect in Li2ZrO3 by using ion-induced luminescence

493

Study on damage statistical constitutive model and stochastic simulation for warm ice-rich frozen silt

494

Study on damping behavior of A356 alloy after grain refinement

495

Study on damping behavior of FeAl3 reinforced commercial purity aluminum

496

Study on damping capacity of aluminum composite reinforced with in situ TiAl3 rod

497

Study on deactivation of hybrid catalyst for dimethyl ether synthesis in slurry reactor

498

STUDY ON DECANTATION WAYS OF ROCK SALT BRINES AND THEIR EFFECTIVE USE

499

Study on decay heat removal of compact ITER

500

Study on decaying characteristics of activated sludge from a circular plug-flow reactor using response surface methodology

501

Study on Decision-Making Factors of Big Data Application in Enterprises: Using Company S as an Example

502

Study on de-coating used beverage cans with thick sulfuric acid for recycle

503

Study on decomposition process of NaAlH4 by in-situ TEM

504

Study on decomposition products of norbixin during bleaching with hydrogen peroxide and a peroxidase by means of UPLC-UV and mass spectrometry

505

STUDY ON DECREASING LEAD TIME OF FABRIC SUPPLY IN AN APPAREL SUBCONTRACTOR

506

Study on decreasing tool wear in EDM due to arc spots sliding on electrodes

507

Study on deep inland penetration of sea breeze over complex terrain in the tropics

508

Study on deformation behavior and strain homogeneity during cyclic extrusion and compression

509

Study on deformation of titanium thin-walled part in milling process

510

Study on degradation and crosslinking of impact polypropylene copolymer by dynamic rheological measurement

511

Study on degradation kinetics of sulforaphane in broccoli extract

512

Study on degradation of dimethoate solution in ultrasonic airlift loop reactor

513

Study on degradation of dimethoate solution in ultrasonic airlift loop reactor

514

Study on Degradation of Textile Dyes by Photocatalytic Ozonation Assisted with Tin Doped Zinc Oxide Nanorods

515

Study on Delaunay Triangulation with the Islets Constraints

516

Study on demagnetization characteristics of magnetic shielding plate in cathode ray tube

517

Study on dependence of hydrodynamic characteristics on gravity in a vertical upward channel bubbly flow Original Research Article

518

Study on deposition kinetics of high-K materials by X-ray fluorescence techniques

519

Study on deposition tendency of coal ash under various gasification environments through DTF

520

Study on design and application of fully automatic miniature surface plasmon resonance concentration analyzer

521

Study on design and application of fully automatic miniature surface plasmon resonance concentration analyzer

522

Study on Design of High Precision Linear Guideway for CNC Vertical Machining Center

523

Study on design of Huadian oil shale-fired circulating fluidized bed boiler

524

Study on design of molten salt solar receivers for beam-down solar concentrator

525

Study on design of operating mechanism of auger mining machine

526

Study on design optimization of a crushed stone layer with shading board placed on a railway embankment on warm permafrost

527

Study on destruction of extracted toxins from isolated Cyanobacteria using titanium dioxide

528

Study on Desulfurization Efficiency and Products of Ce-Doped Nanosized ZnO Desulfurizer at Ambient Temperature

529

Study on detection for the defects of XLPE cable lines

530

Study on detection technique of illicit materials using pulsed fast white neutron analysis

531

Study on detection technique of illicit materials using pulsed fast white neutron analysis

532

study on determination of settlement locations in pt. batu kapal, sapa raya village, tenga sub-district, south minahasa regency

533

Study on development of polyamide gears for improvement of load-carrying capacity

534

Study on DGAT1exon8 Polymorphism in Iranian Buffalo

535

Study on dielectric ageing behaviour of antiferroelectric (Pb1–xBax)ZrO3 (0 £ x £ 0.10) ceramics

536

Study on dielectric and tunable properties of Cr-doped Ba0.6Sr0.4TiO3 thin films by rf sputtering

537

Study on dielectric properties of humidity sensing nanometer materials

538

Study on dielectric properties of oil/water random composites

539

Study on dielectric surface discharge in transformer oil under high voltage nanosecond pulse

540

Study on dielectrophoretic deposition of airborne particles in a vertical micro channel

541

STUDY ON DIFFERENT BEAM MODELS IN MOVING FORCE IDENTIFICATION

542

Study on different pre-treatment procedures for metal determination in Orujo spirit samples by ICP-AES Original Research Article

543

Study on different solutions to reduce the dynamic impacts in transition zones for high-speed rail

544

Study on differentiability problems of interval-valued functions

545

Study on differential scanning calorimetry analysis with two operation modes and organic and inorganic phase change material (PCM)

546

Study on diffusion barrier layer of silicon-based thin-film solar cells on polyimide substrate

547

Study on diffusion characteristics of the excited carriers in electron-hole plasma in GaAs using high-energy ions

548

Study on diffusion coefficient of benzene and ethyl benzene vapours in nanoporous silica aerogel and silica aerogel-activated carbon composites

549

Study on Diplazontinae (Hymenoptera: Ichneumonidae) in north central Iran

550

Study on direct benzoannelations of pyrrole and indole systems by domino reactions with 4,5-dicyanopyridazine

551

Study on direct sound reduction structure for reducing noise generated by vibrating solids

552

Study on discrete optimization techniques in reliability-based optimization of truss structures

553

Study on diseases of cement concrete pavement in permafrost regions

554

Study on dispersion and electrical property of multi-walled carbon nanotubes/low-density polyethylene nanocomposites

555

STUDY ON DISPERSION OF AIRBORNE RADIONUCLIDES RELEASED FROM NUCLEAR POWER PLANT UNDER HYPOTHETICAL ACCIDENTAL SCENARIO

556

Study on Dispersion of Cement Grout in Sand considering Filtration Effect through the EDTA Titration Test

557

Study on dispersion, adsorption and flow retaining behaviors of cement mortars with TPEG-type polyether kind polycarboxylate superplasticizers

558

Study on dissolved organic carbon in precipitation in Northern China

559

Study on Distribution of Dairy Cattle Hoof Lesions and its Relation to Locomotion Scoring

560

Study on distribution of elements in deep-sea Pacific polymetallic nodules via two-dimensional mapping laser ionization orthogonal time-of-flight mass spectrometry

561

Study on distribution of elements in deep-sea Pacific polymetallic nodules via two-dimensional mapping laser ionization orthogonal time-of-flight mass spectrometry

562

Study on distribution of long-period stacking ordered phase in Mg–Gd–Y–Zn–Zr alloy using friction stir processing

563

STUDY ON DIVERSITY OF BEES (HYMENOPTERA, APOIDEA) FROM DIFFERENT REGIONS OF IRAQ

564

Study on DNA damage induced by CdSe quantum dots using nucleic acid molecular “light switches” as probe

565

Study on DNA-binding properties and cytotoxicity in L1210 of La(III) complex with PMBP-isonicotinoyl hydrazone

566

Study on dominant mechanism of high-cycle fatigue life in 6061-T6 aluminum alloy through microanalyses of microstructurally small cracks Original Research Article

567

Study on Drainage of Pavement Layers and Improvement Strategies: Case Study

568

Study on drilling characteristics and mechanical properties of CFRP composites

569

Study on Drive System of Hybrid Tree Harvester

570

Study on Drivers’ Behaviour Relationships to Reduce Road Accidents in Puchong, Selangor Darul Ehsan

571

Study on drought tolerance and interrelationships among some agronomic and morphophysiological traits in sugar beet lines

572

Study on drug related hospital admissions in a tertiary care hospital in South India

573

Study on drug release of and biological response to UHMWPE wear debris carrying estradiol

574

Study on dry sliding friction and wear properties of Ti2AlN/TiAl composite

575

Study on Drying Kinetics of Paddy Rice: Intermittent Drying

576

Study on drying stage of nanoscale powder preparation

577

Study on dryout point by wavelet and GNN

578

Study on dual-site inhibitors of acetylcholinesterase: Highly potent derivatives of bis- and bifunctional huperzine B Original Research Article

579

Study on Durability Characteristics of Self-Compacting Concrete with Fly Ash

580

Study on Durability of the Concrete of Sanitation Network in Ouargla Algeria Under the Existence of Sulphates Attack

581

Study on duration of maternal antibodies in calves against Bovine Herpes virus type 1 (BHV-1)

582

Study on durian seed as a new substrate for angkak production

583

Study on Dy2O3-Doped Medium Temperature Sintering (Ba,Sr)TiO3 Series Capacitor Ceramics

584

Study on dye-sensitized solar cell using novel infrared dye

585

Study on dynamic characteristics of natural and mechanical wind in built environment using spectral analysis

586

Study on dynamic interfacial tension of 3-dodecyloxy-2-hydroxypropyl trimethyl ammonium bromide at liquid/liquid interface

587

Study on dynamic optical nonlinearities of excited state proton transfer in ethanol solution of 7-hydroxyquinoline

588

Study on dynamic performance of a three-dimensional high frame supported U-shaped aqueduct

589

Study on Dynamic Service Migration Strategy with Energy Optimization in Mobile Edge Computing

590

Study on dynamic strain aging phenomenon of 3004 aluminum alloy

591

Study on dynamic stress intensity factors of disk with a radial edge crack subjected to external impulsive pressure

592

Study on early-age cracking of cement-based materials with superplasticizers

593

Study on echo suppression effect and coloration due to periodic-type diffusers

594

Study on Ecological Growth Conditions of Cattle Hyalomma Ticks in Punjab, Pakistan

595

Study on economic withholding in electricity market of Zhejiang Province, China

596

Study on economical effect of warble fly in goats in Iran

597

Study on economical effect of warble fly in goats in Iran

598

Study on ECR dry etching and selective MBE growth of AlGaN/GaN for fabrication of quantum nanostructures on GaN (0 0 0 1) substrates

599

Study on Ectoparasites of Rhombomys Opimus, the Main Reservoir of Zoonotic Cutaneous Leishmaniasis in Endemic Foci in Iran

600

Study on EDM phenomena with in-process measurement of gap distance

601

Study on EDTA-degrading bacterium Burkholderia cepacia YL-6 for bioaugmentation

602

Study on education of self-controlling by play therapy in reduction of behavior problems of abhorrent preschool children (oppositional disobedience disorder)

603

Study on effciency of the Adomian decomposition method for stochastic differential equations

604

Study on effect of dimples on friction of parallel surfaces under different sliding conditions

605

Study on effect of hydrogen treatment on amorphous carbon film using scanning probe microscopy

606

Study on effect of hydrogen treatment on amorphous carbon film using scanning probe microscopy

607

Study on effect of intellectual capital on economic and noneconomic performance evaluation (Case Study: University of Isfahan)

608

Study on effect of jellyfish collagen hydrolysate on anti-fatigue and anti-oxidation

609

Study on effect of lipophilic curcumin on sub-domain IIA site of human serum albumin during unfolded and refolded states: A synchronous fluorescence spectroscopic study

610

Study on effect of liquid level on the heat leak into vertical cryogenic vessels Original Research Article

611

Study on effect of massage therapy on pain severity in orthopedic patients

612

Study on Effect of Plant Density and Nitrogen on Yield and Yield Components of Visia faba (Faba Bean)

613

Study on effect of quantum well number on performance characteristics of GaN-based vertical cavity surface emitting laser

614

Study on effect of salinity level of water on electrocardiogram and some of blood serum minerals in grass carp, Ctenopharyngodon idella

615

Study on effect of strain rate on 3D surface asperity flattening in uniaxial planar compression by crystal plasticity finite element modelling

616

Study on effect of wind on natural smoke exhaust of enclosure fire with a two-layer zone model

617

Study on effective Hamiltonian and decoupling equation

618

Study on Effective Methods for Reducing the Alternate Bearing in Golden Delicious Apple Cultivar

619

STUDY ON EFFECTIVENESS OF GUIDELINES AND HIGH DEPENDENCY UNIT MANAGEMENT ON DIABETIC KETOACIDOSIS PATIENTS

620

Study on Effectiveness of Low Dose Theophylline as Add-on to Inhaled Corticosteroid for Patients with Sulfur Mustard Induced Bronchiolitis

621

Study on Effectiveness of Various Biofertilizers on the Growth & Biomass Production of Selected Vegetables

622

Study on Effects of Ascorbic Acid and Citric Acid on Vase Life of Cut Lisianthus (Eustoma grandiflorum) ‘Mariachi Blue’

623

Study on effects of different plant density on seed yield, oil and protein content of four canola cultivars in western Iran

624

Study on effects of different rotational speed functions in elastic-plastic analysis of annular thin disk of functionally graded material

625

Study on Effects of E-Commerce Application and New Product Development Strategy on New Product Development Performance: Using Enterprises of Science Park as Examples

626

Study on effects of negative driving torque in servomotor drivers

627

Study on effects of solar radiation and rain on shrinkage, shrinkage cracking and creep of concrete

628

Study on effects of substrate temperature on growth and structure of alignment carbon nanotubes in plasma-enhanced hot filament chemical vapor deposition system

629

Study on effects of the feed on AFM-based nano-scratching process using MD simulation

630

Study on effects of thoron and thermal treatment for aging-related diseases in humans

631

Study on Efficacy of Hepatitis B Immunization in Vaccinated beta-thalassemia Children in Tehran

632

Study on Egg Productivity of Guinea-Fowls (Numida meleagris)

633

Study on EL emission region of polymer thin film in PPV LED

634

Study on elastic constant softening in stress-induced martensitic transformation by molecular dynamics simulation

635

Study on electric insulation properties for development of conduction-cooled HTS SMES Original Research Article

636

Study on electric motors with bulk superconductors in the rotor

637

Study on electrical and chemical characteristics of heat-treated FRP

638

Study on electrical and photoelectrical behaviour of undoped and doped furazano[3,4-b]piperazine (FP) thin-film devices

639

Study on electrical characteristics of organic electrophosphorescent devices based on new Ir complex

640

Study on electrical energy and prospective electricity generation from renewable sources in Australia

641

Study on electrical properties of CdS films prepared by chemical pyrolysis deposition

642

Study on electrical strength of suspension insulators in steep impulse voltage range

643

Study on electricity-generation characteristic of two-chambered microbial fuel cell in continuous flow mode

644

Study on Electrochemical Behavior of Hydrazine at a Glassy Copper Nanoparticles

645

Study on electrochemical behavior of tryptophan at a glassy carbon electrode modified with multi-walled carbon nanotubes embedded cerium hexacyanoferrate

646

Study on electrochemical behaviors and the reaction mechanisms of dopamine and epinephrine at the pre-anodized inlaying ultrathin carbon paste electrode with nichrome as a substrate

647

Study on Electrochemical Characteristics of Electroless Co-Ni-B Alloy with Cerium

648

Study on Electrochemical Oxidation of m-Nitrophenol on Various Electrodes Using Cyclic Voltammetry

649

Study on electrochemical preparation of Al-Li-Y alloys from Y2O3 in LiCl-KCl-AlCl3 molten salts

650

Study on electrochemical re-oxidation of anode-supported solid oxide fuel cells using oxide ion current

651

Study on electrode reaction of polym(N-methyl pyrrole)/platinum in AC measurement

652

Study on electrodeposition of Al on W–Cu substrate in AlCl3 + LiAlH4 solutions

653

Study on electroelastic field concentration around the electrode tip in multilayer ferroelectric actuators of two designs and their optimizations

654

Study on electroluminescence processes in dye-doped organic light-emitting diodes

655

Study on electroluminescent behavior of Ga/Alq3/TCAQ/ITO double layer device

656

Study on electrolytic aluminium carbon anode preparation with calcined anthracite

657

Study on electromagnetic properties of MgCuZn ferrite/BaTiO3 composites

658

Study on electromagnetic properties of MnZn ferrites with Fe-poor composition

659

Study on Electromagnetic Shielding Effectiveness of Ni-P-La Alloy Coatings

660

Study on electron emission suppression characteristic of molybdenum grid coated with Hf film by ion beam assisted deposition

661

Study on electron scattering in solid targets using accurate transport cross-sections

662

Study on electronic properties of single-wall carbon nanotubes

663

Study on electronic transport properties of WO3/TiO2 nanocrystalline thin films by photoassisted conductive atomic force microscopy

664

Study on electrorheological properties of novel polymer-Ce4+ complex

665

Study on Electrowinning of Cobalt by Cyclic Voltammetry Technique

666

STUDY ON EM SCATTERING FROM 2-D TARGET ABOVE 1-D LARGE SCALE ROUGH SURFACE WITH LOW GRAZING INCIDENCE BY PARALLEL MOM BASED ON PC CLUSTERS

667

Study on emission of decomposed chemicals of esters contained in PVC flooring and adhesive

668

Study on emulsification stability of wastewater produced by polymer flooding

669

Study on energy absorbing composite structure made of concentric NiTi spring and porous NiTi

670

Study on energy conversion characteristics of a high frequency standing-wave thermoacoustic heat engine

671

Study on energy dissipation pattern in vibrating fluid filled cylindrical shells with a constrained viscoelastic layer

672

Study on energy efficient envelope design for telecommunication base station in Guangzhou

673

Study on energy flows in thermoacoustic engines utilizing two-temperature heat sources

674

Study on Energy Law of Similitude for Laser Propulsion in Repetitively-pulsed Mode

675

Study on energy levels of atom neon

676

Study on energy response of a solid state nuclear track detector to neutrons up to 80 MeV

677

Study on energy response of a solid state nuclear track detector to neutrons up to 80 MeV

678

Study on energy transfer in organic multilayer well structure

679

Study on energy use efficiency for paddy crop using data envelopment analysis (DEA) technique

680

Study on enhanced Karnik–Mendel algorithms: Initialization explanations and computation improvements

681

Study on Environmental Noise of the Mine TEM Detection System and Development of the Induction Probe

682

Study on environmental quality of a surgical block

683

Study on epilithic diatoms in the kozluk creek (Arapgir-Malatya, Turkey)

684

Study on epoxy matrix modified with poly(2,6-dimethyl-1,4-phenylene ether) for application to copper clad laminate

685

Study on epoxy/BaTiO3 composite embedded capacitor films (ECFs) for organic substrate applications

686

Study on Equal Channel Angular Pressing Process of AA7075 with Copper Casing by Finite Element-response Surface Couple Method

687

Study On Establishing National Standard Of Vocational Teachers’ Training In China

688

Study on estimating the evapotranspiration cover coefficient for stream flow simulation through remote sensing techniques

689

Study on Ethnobotany and the Effect of Ecological Factor on the Yield of Essential Oil of Ziziphora clinopodioides Lam. (Case Study: Yazd Province)

690

Study on ethylbenzene and xylene conversion over modified ZSM-5 Original Research Article

691

Study on ethylene (co)polymerization and its kinetics catalyzed by a reversible crosslinked polystyrene-supported metallocene catalyst

692

Study on ethylene polymerization by homogeneous Cp2ZrCl2/methylaluminoxane catalyst system

693

Study on evacuation behaviors at a T-shaped intersection by a force-driving cellular automata model

694

Study on evaluation index system of rubber materials for sealing

695

Study on Evaluation Model of Chinese P2P Online Lending Platform Based on Hybrid Kernel Support Vector Machine

696

Study on evaluation time in typhoon simulation based on Monte Carlo method

697

Study on evaporative cooling effect of roof lawn gardens

698

Study on exfoliation of layered perovskite-type niobates

699

Study on existence of solutions for some nonlinear functional–integral equations Original Research Article

700

Study on expansion power recovery in CO2 trans-critical cycle

701

Study on Experimental and Modeling of Rotary Roll Dressing of Grinding Wheels

702

Study on extended gate field effect transistor with tin oxide sensing membrane

703

Study on extraction of crop information using time-series MODIS data in the Chao Phraya Basin of Thailand Original Research Article

704

Study on fabrication and mechanism in of porous metals by spark plasma sintering

705

Study on fabrication of superhydrophobic and superparamagnetic functional coatings and its properties

706

Study on fabrication of the superhydrophobic sol–gel films based on copper wafer and its anti-corrosive properties

707

Study on Fabrication Process of Anisotropic Injection Bonded Nd-Fe-B Magnets Original Research Article

708

Study on Factors Affecting Learning Strategies in Reading Comprehension

709

Study on Factors Affecting Performance of Non-profit Organizations in the Participatory Working Methods——Taking Anti-poverty Practice of Sichuan Rural Development Organization as an Example

710

Study on factorS affecting the occurrence of upper gaStrointeStinal bleeding in elderly acute Stroke patientS undergoing rehabilitation

711

Study on Factors Associated with Acceptance of Electronic Education Systems (A Case Study: Sixth Grade Primary School Teachers of Gorgan City)

712

Study on factors controlling catalytic activity for low-temperature water–gas-shift reaction on Cu-based catalysts

713

Study on Factors Determining Limits of Minimum Machinable Size in Micro EDM

714

Study on factors influencing the adoption of drip irrigation by farmers in humid tropical Kerala, India

715

Study on failure process of delaminated stiffened composite plates under compression

716

Study on Fast Acquisition of Hybrid DS/FHSS

717

Study on fatigue and wear behaviors of a TiN coating using an inclined impact-sliding test

718

Study on fatigue crack propagation and extrinsic toughening of an Al–Li alloy

719

Study on fatigue crack propagation and extrinsic toughening of an Al–Li alloy

720

Study on fatigue cracks in steel-concrete shear connection with composite dowels

721

Study on fatigue property of a new 2.8 GPa grade maraging steel

722

Study on fault mechanism of shaft hoist steelwork

723

Study on fault tolerant workspace and fault tolerant planning algorithm based on optimal initial position for two spatial coordinating manipulators

724

Study on Fe reduction in AZ91 melt by B2O3

725

Study on Fe reduction in AZ91 melt by B2O3

726

Study on Fe(III) and Mn(II) modified activated carbons derived from Zizania latifolia to removal basic fuchsin Original Research Article

727

Study on Fe(VI) species as a disinfectant: Quantitative evaluation and modeling for inactivating Escherichia coli

728

Study on Fe3O4 Magnetic Nanoparticles ‎Size Effect on Temperature Distribution ‎of Tumor in Hyperthermia: A Finite ‎Element Method ‎

729

Study on Fe–Al–Si in situ composite coating fabricated by laser cladding

730

Study on feasibility of producing an amorphous surface layer of Fe49Cr18Mo7B16C4Nb3 by pulsed Nd:YAG laser surface melting

731

Study on ferrocenes, part 9 [] substrate selective transformations of some ferrocenylhydrazones

732

Study on Ferroelectric and Dielectric Properties of La-Doped CaBi4Ti4O15-Based Ceramics

733

Study on ferromagnetic shape memory alloy Ni–Mn–Ga films

734

Study on field emission and photoluminescence properties of ZnO/graphene hybrids grown on Si substrates

735

Study on filler content dependence of the onset of positive temperature coefficient (PTC) effect of electrical resistivity for UHMWPE/LDPE/CF composites based on their DC and AC electrical behaviors

736

Study on filler metal (Ni-Fe-C) during GTAW of WC-30Co to 45 carbon steel

737

Study on film boiling heat transfer for water jet impinging on high temperature flat plate

738

Study on fine-mesh PMTs for detection of aerogel Cherenkov light

739

Study on fine-mesh PMTs for detection of aerogel Cherenkov light

740

Study on Finite Element Analysis of Fine Solid Lines by Flexographic Printing in Printed Antennas for RFID Transponder

741

Study on finite strain and its relationship with magnetic fabric along Ailao Shan-Red River shear zone

742

Study on fired bricks with replacing clay by fly ash in high volume ratio

743

Study on first-cycle combustion and emissions during cold start in a TSDI gasoline engine

744

Study on fish mortality caused by the combined effects of pesticides and changes in environmental conditions

745

Study on fish mortality caused by the combined effects of pesticides and changes in environmental conditions

746

Study on flame dynamics with secondary fuel injection control by large eddy simulation

747

Study on flanged shapes in fineblanked-hole flanging process (FB-hole flanging process) using finite element method (FEM)

748

Study on flavonoid migration from active low-density polyethylene film into aqueous food simulants

749

Study on flow and heat transfer characteristics of composite porous material and its performance analysis by FSP and EDEP

750

Study on flow and heat transfer characteristics of heat pipe with axial “Ω”-shaped microgrooves

751

Study on flow and heat transfer characteristics of ice slurry in the transition region

752

Study on flow boiling critical heat flux enhancement of graphene oxide/water nanofluid

753

Study on Flow Boiling Heat Transfer in Segmented Internally-Threaded Tube

754

Study on flow characteristics and pressure distribution along a heated channel in subcooled flow boiling

755

Study on flow characteristics in gas-molten metal mixture pool

756

Study on flow characteristics in gas-molten metal mixture pool Original Research Article

757

Study on Flow Characteristics of Helium Turboexpander with a Novel Intake Structure

758

Study On Flow Erosivity Indicators for Predicting Soil Detachment Rate at Low Slopes

759

Study on flow instability for feasibility of a thin liquid film first wall

760

Study on flow visualization of flip chip encapsulation process for numerical simulation

761

Study on fluid flow in nonlinear elastic porous media: Experimental and modeling approaches

762

Study on fluid–solid coupling heat transfer in fractal porous medium by lattice Boltzmann method

763

Study on fluorescence properties of carbogenic nanoparticles and their application for the determination of ferrous succinate

764

Study on fluorescence properties of rare earth complexes influenced by steric effect

765

Study on fluorescence property of dopamine and determination of dopamine by fluorimetry

766

Study on fluoride emission from soils at high temperature related to brick-making process

767

Study on fluoride reduction in artesian well—water from electrodialysis process Original Research Article

768

Study on Fluorimetric Properties of 1,2-Dihydro-2,2,4-trimethylquinoline

769

Study on fluorine-doped indium oxide films deposited by reactive evaporating in CF4/O2 gases

770

STUDY ON FLUOROMETRIC DETERMINATION OF HYDROGEN PEROXIDE CATALYZED BY IRON(III)-TETRASULFONATOPHTHALOCYANINE WITH THIAMINE HYDROCHLORIDE AS A SUBSTRATE

771

Study on flutter characteristics of cable-supported bridges

772

Study on Foetal Outcome in Pre-eclamptic Mother

773

Study on follicular characteristics, hormonal and biochemical profile in norgestomet+PMSG treated acyclic buffaloes

774

Study on food-grade vitamin E microemulsions based on nonionic emulsifiers

775

Study on forced hydrolysis reaction of acidic Fe2(SO4)3 solution—structure and properties of precipitates

776

Study on formability of tube hydroforming through elliptical die inserts

777

Study on formation and characterization of iron aluminide coatings on 9Cr–1Mo steel substrate

778

Study on formation and morphology of sigma-phase in continuous annealing furnace roller

779

Study on formation and shape of carbon nanotips depending on ion bombardment

780

Study on formation of “easy to remove oxide scale” during mechanical descaling of high carbon wire rods

781

Study on formation of acrylamide in asparagine–sugar microwave heating systems using UPLC-MS/MS analytical method

782

Study on formation of acrylamide under low-moisture asparagine–sugar reaction system

783

Study on formation of high performance ice slurry by W/O emulsion in ice storage (discussion on characteristics of propagation of supercooling dissolution)

784

Study on formation of ice slurry by W/O emulsion (discussion for promoting propagation of supercooling dissolution due to AC voltage impression)

785

Study on formation of ice slurry by W/O emulsion (discussion for promoting propagation of supercooling dissolution due to DC voltage impression)

786

Study on formation of starch–lipid complexes during extrusion-cooking of almond flour Original Research Article

787

Study on formation of unstable clathrate-like water molecules at freezing/melting temperatures of water and salty water

788

Study on forming directivity with constant beam width in low frequency based on small sensor

789

Study on forming limit and feasibility of tube axial compressive process

790

Study on Forms of Vortex Breakdown over Delta Wing

791

Study on formulated diet for large yellow croaker (Larimichthys crocea) larvae at the early feeding stage

792

Study on fouling of ultrafiltration membrane by electron spin resonance

793

Study on Fourier transforms profilometry based on bi-color projecting

794

Study on fractal characteristics of b value with microseismic activity in deep mining

795

Study on fractions of adsorbed Pb and Cd onto natural surface coatings

796

Study on fracture behavior of ferroelectric ceramics under combined electromechanical loading by using a moiré interferometry technique

797

Study on fracture behavior of particulate reinforced magnesium matrix composite using in situ SEM

798

Study on free vibration analysis of circular cylindrical shells using wave propagation

799

Study on Free Vibration and Wave Power Reflection in Functionally Graded Rectangular Plates using Wave Propagation Approach

800

Study on free vibration of moderately thick orthotropic laminated shallow shells by boundary-domain elements

801

Study on frequency, etiology and some enzymatic activities of subclinical ovine mastitis in Urmia, Iran

802

Study on frequency, etiology and some enzymatic activities of subclinical ovine mastitis in Urmia, Iran

803

Study on friction and wear behavior of polyphenylene sulfide composites reinforced by short carbon fibers and sub-micro TiO2 particles

804

Study on Friction Torque Loading with an Electro-hydraulic Load Simulator

805

Study on functionally gradient coatings of Ti–Al–N

806

Study on Fundamental Frequencies of Cylindrical Storage Tanks Obtained from Codes and Finite Element Method

807

Study on Fungal Flora in the Midgut of the Larva and Adult of the Different Populations of the Malaria Vector Anopheles Stephensi

808

STUDY ON FUNGICIDAL ACTIVITY OF NEWLY SYNTHESIZED COMPLEX COMPOUNDS OF Cu (II), Zn (II) AND Ni (II) WITH PYRAZOLE-DERIVED LIGANDS AGAINST THE PHYTOPATHOGENIC FUNGUS Phomopsis viticola Sacc.IN LABORATORY CONDITIONS

809

Study on fusion characteristics of biomass ash

810

Study on fuzzy optimization methods based on principal operation and inequity degree

811

Study on fuzzy reasoning application for sensory evaluation of sausages

812

Study on gas kinetic unified algorithm for flows from rarefied transition to continuum

813

Study on gas permeation behaviour through atmospheric plasma-sprayed yttria stabilized zirconia coating

814

Study on gas separation by supported liquid membranes applying novel ionic liquids Original Research Article

815

Study on gas/solid flow in an obstructed pulmonary airway with transient flow based on CFD–DPM approach

816

Study on gas–liquid phase mass transfer coefficient of entrained flow reactor

817

Study on gas–liquid two-phase spraying characteristics of nozzles for the humidification of smoke

818

Study on gas-solid flow behaviors in a spouted bed at elevated pressure: Numerical simulation aspect

819

Study on GASTOF – A 10 ps resolution timing detector

820

Study on GASTOF – A 10 ps resolution timing detector

821

Study on gastric interdigestive pressure activity based on phase space reconstruction and FastICA algorithm

822

Study on Gastrointestinal Evaluation of Iron Deficiency Anaemia Patients Attending at BIRDEM Hospital

823

Study on gastrointestinal parasitic infections of Raeini goats

824

Study on Gd and Mg co-doped ceria electrolyte for intermediate temperature solid oxide fuel cells

825

Study on GDC-KZnAl composite electrolytes for low-temperature solid oxide fuel cells

826

Study on GDC-LSGM composite electrolytes for intermediate-temperature solid oxide fuel cells

827

Study on GeGaSbTe film for long data retention phase change memory application

828

Study on gelatin-containing artificial skin IV: a comparative study on the effect of antibiotic and EGF on cell proliferation during epidermal healing

829

Study on gelatin-containing artificial skin: I. Preparation and characteristics of novel gelatin-alginate sponge

830

Study on gelation of partially hydrolyzed polyacrylamide with titanium(IV)

831

Study on gelcasting and properties of recrystallized silicon carbide

832

Study on gene action and combining abilities for thermotolerant ablilities of corn (Zea mays L.)

833

Study on general analytical method for CNC machining the free-form surfaces

834

Study on generalized magneto-thermoelastic problems by FEM in time domain

835

Study on generation and sharing of on-demand global seamless data—Taking MODIS NDVI as an example

836

Study on Generation of Higher Order Orbital Angular Momentum Modes and Parameters Affecting the Vortex

837

Study on generation of rock fracture surfaces by using fractal interpolation

838

Study on Generative Adversarial Network in Discrete Data: A Survey

839

Study on Genetic Diversity of Resistance to the Rust in Iranian Garlic Clones (Allium sativum L.) Using NBS profiling Technique

840

Study on Genetic Diversity of Terminal Fragment Sequence of Isolated Persian Tobacco Mosaic Virus

841

Study on genetic variability and traits interrelationship among released soybean varieties of India [Glycine max (L.) Merrill]

842

Study on genetic variability of blood ark, Anadara cornea at east coast of peninsular Malaysia using random amplified polymorphic DNA: A preliminary assessment

843

Study on genotypic variation for ethanol production from sweet sorghum juice

844

Study on geometry modeling in the dynamic stamping simulation of a die

845

Study on GHG control scenarios by life cycle analysis — World energy outlook until 2100 —

846

Study on ginsenosides in different parts and ages of Panax quinquefolius L.

847

Study on glass transition and crystallization kinetics of GexSb40−xSe60 glasses by differential thermal analysis

848

Study on glass-forming ability and hydrogen storage properties of amorphous Mg60Ni30La10 − xCox (x = 0, 4) alloys

849

Study on Glutathione S-Transferase (GST) Inhibition Assay by Triclabendazole. ?: Protoscoleces (Hydatid Cyst; Echinococcus granulosus) and Sheep Liver Tissue

850

STUDY ON GLUTATHIONE S-TRANSFERASE INHIBITION ASSAY BY TRICLABENDAZOLE ON FASCIOLA spp

851

STUDY ON GLUTATHIONE S-TRANSFERASE INHIBITION ASSAY BY TRICLABENDAZOLE. III: NEMATODIRUS PARASITE an‎d SHEEP LIVER TISSUE

852

Study on glycosylated prodrugs of toxoflavins for antibody-directed enzyme tumor therapy

853

Study on Gold as a Hedge or Safe Haven for the Stock Market by a Markov Switching Approach

854

Study on Government Management Mechanism of Energy Conservation and Emission Reduction

855

Study on gradient thermal driven adsorption cycle with freezing and cooling output for food storage

856

Study on grain boundary character and strain distribution of intergranular cracking in the CGHAZ of T23 steel

857

Study on gravity flow of granules in beds supported by louver–sublouver system

858

Study on Gray code control rod position indicator

859

Study on Grinding Biomass as Pre-treatment for Biogasification

860

Study on Groundwater Quality Using Geographic Information System (GIS), Case Study: Ardabil, Iran

861

Study on growth of Toxoplasma gondii tissue cyst in laboratory mouse

862

Study on H2O2/TAED and H2O2/TBCC bleaching mechanism related to hydroxyl radical with a fluorescent probe

863

Study on halolactamization-γ-hydroxylation or haloiminolactonization of 2,3-alkadienamides

864

Study on harbor resonance and focusing by using the null-field BIEM

865

Study on Hard and Soft Ticks of Domestic and Wild Animals in Western Iran

866

Study on heat and mass recovery in adsorption refrigeration cycles

867

Study on heat and mass transfer characteristics of humid air-flow in a fin bundle

868

Study on heat and mass transfer of flexible filamentous particles in a rotary dryer

869

Study on heat driven pump. Part 1-experimental measurements

870

Study on heat driven pump. Part 2-Mathematical modeling

871

Study on Heat Generation and Distribution in Friction Stir Welding of AA1100 Aluminum Alloy

872

Study on heat transfer and fluid flow characteristics with short rectangular plate fin of different pattern

873

Study on heat transfer and pressure drop performances of ribbed channel in the high temperature heat exchanger

874

Study on heat transfer in super-high-speed grinding: energy partition to the workpiece in HEDG

875

Study on heat transfer performance for loop heat pipe with circular flat evaporator

876

Study on heat transfer performance of an aluminum flat plate heat pipe with fins in vapor chamber

877

Study on heat transfer process for in-slab heating floor

878

Study on heat-resistant property of adhesive/carbon–carbon composites joints

879

Study on Heavy Metal Contamination in Muscle and Liver of Coypu (Myocastor Coypus)

880

Study on heavy metal resistant fecal Coliforms isolated from industrial, urban wastewater in Arak, Iran

881

Study on heavy metals (Chromium, Cadmium, Cobalt and Lead) concentration in three pelagic species of Kilka (Genus Clupeonella) in the southern Caspian Sea

882

Study on heavy metals levels and its risk assessment in some edible fishes from Bangshi River, Savar, Dhaka, Bangladesh

883

Study on heterogeneity of β-glucosidase from Aspergillus species by using counter-current distribution

884

STUDY ON HIGH DENSITY POLYETHYLENE GRAFTED WITH MALEIC ANHYDRIDE

885

Study on high dose iron ion implantation in aluminum foil

886

STUDY ON HIGH GAIN CIRCULAR WAVEGUIDE ARRAY ANTENNA WITH METAMATERIAL STRUCTURE

887

Study on high performance ice slurry formed by cooling emulsion in ice storage (discussion on adaptability of emulsion to thermal storage material)

888

Study on High Resolution Transient Electromagnetic Detecting Device Based on FPGA

889

Study on high speed parallel algorithm using PC grid environment for visualization measurements by Digital Holographic Particle Tracking Velocimetry Original Research Article

890

Study on high thermal conductivity of mesogenic epoxy resin with spherulite structure

891

Study on high voltage generation using flame column and DC power supply

892

Study on higher order azimuthally polarized Laguerre–Gaussian mode beams with high NA lens

893

Study on highly hydrophilic cellulose hollow fiber membrane contactors for thiol sulfur removal

894

Study on highly sensitive potentiometric IgG immunosensor

895

Study on highly visible light active Bi-doped TiO2 composite hollow sphere

896

Study on high-precision temperature measurement of infrared thermal imager

897

Study on high-speed twin-roll caster for aluminum alloys

898

Study on High-strength Anaerobic Landfill Leachate Treatability By Membrane Bioreactor Coupled with Reverse Osmosis

899

Study on high-strength and high-conductivity Cu–Fe–P alloys

900

Study on high-strength composite portland cement with a larger amount of industrial wastes

901

Study on high-temperature oxidation behaviors of Cr–Si–N films

902

Study on histopathology, ultrasonography and some special serum enzymes and collagens for 38 advanced patients of schistosomiasis japonica

903

STUDY ON HLA-DQB1 *03 ALLELE ASSOCIATED WITH WOMEN HUMAN PAPILLOMA VIRUS HPV) LESIONS

904

Study on homogeneous competitive immune reaction by fluorescence correlation spectroscopy: Using synthetic peptide as antigen

905

Study on horizontal electromagnetic continuous casting of CuNi10Fe1Mn alloy hollow billets

906

Study on horn-shaped polypyrrole prepared by pulse potential

907

Study on horn-shaped polypyrrole prepared by pulse potential

908

Study on hot corrosion reactions between SmYbZr2O7 ceramic and vanadium pentoxide at temperatures of 600–1000 °C in air

909

Study on hot deformation behavior and microstructure evolution of cast-extruded AZ31B magnesium alloy and nanocomposite using processing map

910

Study on hot deformation behavior of 12%Cr ultra-super-critical rotor steel

911

Study on hot deformation behavior of carbon structural steel with flow stress

912

Study on hot deformation characteristics of 12%Cr ultra-super-critical rotor steel using processing maps and Zener–Hollomon parameter

913

Study on humidity sensing properties based on composite materials of Li-doped mesoporous silica A-SBA-15

914

Study on humidity sensing property based on Li-doped mesoporous silica MCM-41

915

Study on humidity sensing property based on TiO2 porous film and polystyrene sulfonic sodium

916

Study on humidity sensitive property of K2CO3-SBA-15 composites

917

Study on hybrid ground-coupled heat pump system for air-conditioning in hot-weather areas like Hong Kong

918

Study on hybrid ground-coupled heat pump systems

919

Study on hybrid heat source overlap welding of magnesium alloy AZ31B

920

Study on hydration process of early-age concrete using embedded active acoustic and non-contact complex resistivity methods

921

Study on hydraulic performance of drip emitters by computational fluid dynamics

922

Study on hydrocarbon-generation evolution and prediction of favorable exploration areas in Gucheng area of Tarim basin

923

Study on hydrodechlorination of polychlorinated biphenyls during reductive pyrolysis in the presence of a catalyst

924

Study on hydrodesulfurization of thiophene over Mo/Al2O3 catalyst presulfided by thiosulfate ammonium

925

Study on Hydrodynamics of the Push Valve Centrifugal Tray, a Novel Gas-Liquid Contactor, Using Computational Fluid Dynamics Simulations

926

Study on hydrogen bonds of carboxymethyl cellulose sodium film with two-dimensional correlation infrared spectroscopy

927

Study on hydrogen bonds of carboxymethyl cellulose sodium film with two-dimensional correlation infrared spectroscopy

928

Study on hydrogen production from steam electrolysis in LHD-type power reactor FFHR

929

Study on hydrogen production with hysteresis in UASB

930

Study on hydrogen reactivity with surface chemical species of nanocrystalline porous silicon

931

Study on hydrogen storage properties of LaNi3.8Al1.2−xMnx alloys

932

Study on hydrogen storage properties of Mg nanoparticles confined in carbon aerogels

933

Study on hydrogenated silicon nitride for application of high efficiency crystalline silicon solar cells

934

Study on hydrogenation behaviors of a Mg-13Y alloy

935

Study on hydrogen-rich syngas production by dry autothermal reforming from biomass derived gas

936

Study on Hydrolysis of Poly(Lactic Acid)/Chitosan/Polyethylene Glycol Nanocomposites in Phosphate Buffer Solution

937

Study on hydrophilic property of hydro-oxygenated amorphous TiOx:OH thin films

938

Study on hydrophilicity of polymer surfaces improved by plasma treatment

939

Study on hydrophobicity degradation of gas diffusion layer in proton exchange membrane fuel cells

940

Study on hydropyrolysis of sedimentary organic matter and geochemical information of hydropyrolysates

941

Study on Hypertext Reading in Students’ Autonomous Learning

942

Study on hyphomycetes genus Corynespora crotonicola causing leaf spot disease from forest flora of North Uttar Pradesh

943

Study on hypobaric storage of green asparagus Original Research Article

944

Study on hypochlorite degradation of aromatic polyamide reverse osmosis membrane

945

Study on ibuprofen/montmorillonite intercalation composites as drug release system

946

Study on ice slurry production by water spray

947

Study on ice storing characteristics in dynamic-type ice storage system by using supercooled water.: Effects of the supplying conditions of ice-slurry at deployment to district heating and cooling system

948

Study on identification of altered rock in hyperspectral imagery using spectrum of field object

949

Study on imipenem resistance and prevalence of blaVIM1 and blaVIM2 metallo-beta lactamases among clinical isolates of Pseudomonas aeruginosa from Mashhad, Northeast of Iran

950

Study on immobilization of the spent ion exchange resins of Tehran research reactor in borosilicate glass

951

Study on immobilized liquid membrane using ionic liquid and PVDF hollow fiber as a support for CO2/N2 separation

952

Study on immune regulation in Hyriopsis cumingii Lea: Effect of pearl-nucleus insertion in the visceral mass on immune factors present in the hemolymph

953

Study on immunity of Leishmania major new crude antigen as a vaccine against leishmaniasis in out bred (resistant) and Balb/c (sensitive) mice

954

Study on Immunomodulatory Activity of Dietary Garlic in Chickens Vaccinated against Avian Influenza Virus (Subtype HgN2)

955

Study on Impact Damage and Energy Dissipation of Coal Rock Exposed to High Temperatures

956

Study on impact fusion at particle interfaces and its effect on coating microstructure in cold spraying

957

Study on impact of heavy metal accumulation in Brachythecium populeum (Hedw.) B.S.G.

958

Study on impact properties of through-thickness stitched foam sandwich composites

959

Study on implantation of Co ions in ZrCuNiAl bulk metallic glass

960

Study on implementation of one-piece lean line design using simulation techniques: A practical approach

961

Study on impregnation of polytetrafluoroethylene in graphite for use as fuel cell collector

962

Study on improved diastereoselectivity in photo-induced electron transfer pinacol coupling reactions of substituted acetophenones

963

Study on improvement of compactness of a plate heat exchanger using a newly designed primary surface

964

Study on improvement of fuel economy and reduction in emissions for stoichiometric gasoline engines

965

Study on improving “self-sharpening” capacity of W–Cu–Zn alloy by the pressureless infiltration method

966

Study on improving output capability of high-power lasers providing short pulses by using different laser glasses together in the amplifier chain

967

Study on in situ reaction-processed Al–Zn/α-Al2O3(p) composites

968

Study on in situ reaction-processed Al–Zn/α-Al2O3(p) composites

969

Study on in situ synthesis process of 2-pyridinecarboxylic acid europium(III) complexes in the gel by absorption spectrum

970

Study on incentive mechanisms of coal green mining

971

Study on incineration technology of oil gas generated during the recovery process of oil spill

972

Study on inclusion complexation between plant growth regulator 6-benzylaminopurine and β-cyclodextrin: Preparation, characterization and molecular modeling

973

Study on increase in temperature of Co–Ti ferrite nanoparticles for magnetic hyperthermia treatment

974

Study on indoor thermal environment of office space controlled by cooling panel system using field measurement and the numerical simulation

975

Study on industrial catalyst for bituminous coal liquefaction

976

Study on Industrial Wastewater Characteristics in New Borg El-Arab City, Alexandria, Egypt

977

Study on Inertial Response Performance of A Micro Electrical Switch for Fuze

978

Study on influence of catalysts on product distribution during liquefaction of Pakistani coal

979

Study on influence of different mixing rules on the aerosol components retrieval from ground-based remote sensing measurements

980

Study on influence of porosity, pore size, spatial and topological distribution of pores on microhardness of as plasma sprayed ceramic coatings

981

Study on Influence of Residual Magnetite in Panzhihua Ilmenite Flotation

982

Study on influential factors for process monitoring and control in laser aided additive manufacturing

983

Study on infrared image detail enhancement algorithm based on adaptive lateral inhibition network

984

Study on infrared spectroscopy technique for fast measurement of protein content in milk powder based on LS-SVM Original Research Article

985

Study on infrared-assisted extraction coupled with high performance liquid chromatography (HPLC) for determination of catechin, epicatechin, and procyanidin B2 in grape seeds

986

Study on inhalation region by means of CFD analysis and experiment

987

Study on inhaled air quality in a personal air-conditioning environment using new scales of ventilation efficiency

988

Study on initial stage of capillary rise dynamics

989

Study on in-situ reaction synthesis and mechanical properties of Si2N2O ceramic

990

Study on in-situ test on mechanical properties of the particle improved roadbed in permafrost

991

Study on instability of the point bolster sheet metal dieless forming

992

Study on instant droplet and particle stages during suspension plasma spraying (SPS)

993

Study on insulating thermal conductive BN/HDPE composites

994

Study on integrated classification system for Chinese coal

995

Study on intelligent battery charging using inductive transmission of power and information

996

Study on intelligent control system of two-dimensional platform based on ultra-precision positioning and large range

997

Study on intelligent control technology for the deep drawing of an axi-symmetric shell part

998

Study on intelligent reasoning of product assembly sequences and simulation

999

Study on interaction between apigenin and human serum albumin by spectroscopy and molecular modeling

1000

Study on interaction between drug and membrane by using liposome coated zirconia–magnesia chromatography