بر اساس عنوان

1
Fabrication and performance of free-standing hydrogen gas sensors
2
Fabrication and performance of functionally graded cathodes for IT-SOFCs based on doped ceria electrolytes
3
Fabrication and performance of gadolinia-doped ceria-based intermediate-temperature solid oxide fuel cells
4
Fabrication and performance of GaN electronic devices
5
Fabrication and performance of multifilamentary Nb/sub 3/Sn wires by the cable-in-tube approach
6
Fabrication and performance of Ni/3 mol% Y2O3–ZrO2 cermet anodes for solid oxide fuel cells
7
Fabrication and performance of parallel-addressed InGaN micro-LED arrays
8
Fabrication and performance of parallel-addressed InGaN micro-LED arrays
9
Fabrication and performance of parallel-addressed InGaN micro-LED arrays
10
Fabrication and performance of parallel-addressed InGaN micro-LED arrays
11
Fabrication and performance of p–i–n CdTe radiation detectors
12
Fabrication and performance of p–i–n CdTe radiation detectors
13
Fabrication and performance of poly(methyl methacrylate) microfluidic chips with fiber cores
14
Fabrication and performance of polypyrrole (Ppy)/TiO2 heterojunction for room temperature operated LPG sensor
15
Fabrication and performance of Pt/C electrodes for low temperature H2/O2 fuel cells
16
FABRICATION AND PERFORMANCE STUDY OF A SOLAR MILK PASTEURIZER
17
FABRICATION AND PERFORMANCE STUDY OF SLOPE TYPE ELECTRIC CUM SOLAR OVEN
18
Fabrication and performance test of a catalyst-coated membrane from direct spray deposition
19
Fabrication and performance test of catalytic micro-combustors as a heat source of methanol steam reformer
20
Fabrication and performance test of contact-type liquid level sensor for measuring thickness variation of liquid lithium jet in the IFMIF/EVEDA lithium test loop
21
Fabrication and performance tests of a segmented p-type HPGe detector
22
Fabrication and performance tests of a segmented p-type HPGe detector
23
Fabrication and performances of an optical sensor system constructed by a novel Cu(I) complex embedded on silica matrix
24
Fabrication and performances of epoxy/multi-walled carbon nanotubes/piezoelectric ceramic composites as rigid piezo-damping materials
25
Fabrication and performances of microencapsulated paraffin composites with polymethylmethacrylate shell based on ultraviolet irradiation-initiated
26
Fabrication and performances of microencapsulated phase change materials based on n-octadecane core and resorcinol-modified melamine–formaldehyde shell
27
Fabrication and performances of new kind microencapsulated phase change material based on stearic acid core and polycarbonate shell
28
Fabrication and phase variation in annealed Cu3Se2 nanowire arrays
29
Fabrication and photoactivities of spherical-shaped BiVO4 photocatalysts through solution combustion synthesis method
30
Fabrication and photocatalysis of CuO/ZnO nano-composites via a new method
31
Fabrication and photocatalysis of mesoporous ZnWO4 with PAMAM as a template
32
Fabrication and photocatalysis of nanostructured TiO2 for solar hydrogen production
33
Fabrication and photocatalytic activities of ZnO arrays with different nanostructures
34
Fabrication and photocatalytic activity of a novel nanostructured TiO2 metal membrane Original Research Article
35
Fabrication and photocatalytic activity of electrospun nylon-6 nanofibers containing tourmaline and titanium dioxide nanoparticles
36
Fabrication and photocatalytic activity of high-efficiency visible-light-responsive photocatalyst ZnTe/TiO2 nanotube arrays
37
Fabrication and photocatalytic activity of porous TiO2 nanowire microspheres by surfactant-mediated spray drying process
38
Fabrication and photocatalytic degradation of reactive blue 19 by CuWO4, Ag3PO4, and CuWO4-Ag3PO4 composites under visible light irradiation
39
Fabrication and photocatalytic properties of free-standing TiO2 nanotube membranes with through-hole morphology
40
Fabrication and photocatalytic properties of spheres-in-spheres ZnO/ZnAl2O4 composite hollow microspheres
41
Fabrication and photochromic study of titanate nanotubes loaded with silver nanoparticles
42
Fabrication and photoelectric properties of self-assembled bilayer lipid membranes on conducting glass
43
Fabrication and photoelectrochemical characterization of CdS particles in nanospaces of expandable mica
44
Fabrication and photoelectrochemical properties of La5Ti2MS5O7 (M = Ag, Cu) electrodes
45
Fabrication and photoelectrochemical properties of porous ZnWO4 film
46
Fabrication and photoelectrochemical study of Ag@TiO2 nanoparticle thin film electrode
47
Fabrication and photoluminescence characteristics of Er3+-doped optical fiber sensitized by Si particles
48
Fabrication and photoluminescence characteristics of nonuniform Yb-Er codoped films
49
Fabrication and photoluminescence characteristics of single crystalline In2O3 nanowires
50
Fabrication and photoluminescence of GaN/sapphire submicron-scale structures with nanometre scale resolution
51
Fabrication and photoluminescence of GaN/sapphire submicron-scale structures with nanometre scale resolution
52
Fabrication and photoluminescence of molecular hybrid films based on the complexes of 8-hydroxyquinoline with different metal ions via sol–gel process
53
Fabrication and photoluminescence properties of erbium doped size-controlled silicon nanocrystals
54
Fabrication and photoluminescence properties of silicon nanowires with thin surface oxide layers
55
Fabrication and photoluminescence studies of ZnO nanocrystals dispersed in glass films
56
Fabrication and photoluminescent characteristics of one-dimensional La2O2S:Eu3+ nanocrystals
57
Fabrication and photophysical properties of singlet oxygen generating nanoporous membrane
58
Fabrication and photophysical property of Tb(III), Dy(III) and Eu(III) complex LB films containing double functional ligand of long chain mono docosyl phthalate
59
Fabrication and photovoltaic properties of Cu2ZnSnS4/i-a-Si/n-a-Si thin film solar cells
60
Fabrication and photovoltaic properties of multilayered thin films designed by layer-by-layer assembly of poly(p-phenylenevinylene)s
61
Fabrication and photovoltaic properties of self-assembled sulfonated polyaniline/TiO2 nanocomposite ultrathin films
62
Fabrication and physical properties of conductive polyacrylonitrile-polyaniline derivative fibers
63
Fabrication and physical properties of EPDM–organoclay nanocomposites
64
Fabrication and physicochemical characterization of HPMC films with commercial plant extract: Influence of light and film composition
65
Fabrication and Physicochemical Investigation of Ancient Iranian and Pakistani Treated Silver Particles and their Comparison with Silver Nanoparticles
66
Fabrication and piezoelectricity of 0–3 cement based composite with nano-PZT powder
67
Fabrication and plasma resistance properties of transparent YAG ceramics
68
Fabrication and plastic deformation of Y-TZP/alumina nanocomposite ceramics containing oxynitride glass
69
Fabrication and positive temperature coefficient of resistivity properties of semiconducting ceramics based on the BaTiO3–(Bi1/2K1/2)TiO3 system
70
Fabrication and positron annihilation spectroscopy (PAS) characterization of cellulose triacetate membranes for forward osmosis
71
Fabrication and Preliminary Characterization of Tissue Engineering Scaffolds Based on Alumina/Bioactive Glass
72
Fabrication and preliminary evaluation of metal matrix microencapsulated fuels
73
Fabrication and preliminary testing of a planar membraneless microchannel fuel cell
74
Fabrication and preliminary testing of regular microporous membranes manufactured by deep X-ray lithography at the VEPP-3 storage ring
75
Fabrication and process parameter optimization of a 3d printer using response surface methodology
76
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
77
Fabrication and program/erase characteristics of 30-nm SONOS nonvolatile memory devices
78
Fabrication and program/erase characteristics of 30-nm SONOS nonvolatile memory devices
79
Fabrication and properties analysis of Cf–CNT/SiC composite
80
Fabrication and properties of 3-D Cf/ZrB2–ZrC–SiC composites via polymer infiltration and pyrolysis
81
Fabrication and properties of 3-D Cf/ZrC–SiC composites by the vapor silicon infiltration process
82
Fabrication and properties of 3-D Cf/ZrC–SiC composites via in-situ reaction
83
Fabrication and properties of a carbon/polypyrrole three-dimensional microbattery
84
Fabrication and properties of a novel ZnO/Cu composite
85
Fabrication and properties of a tin–lithium alloy
86
Fabrication and properties of acid blue 25 dye-intercalated layered double hydroxides film on an anodic alumina/aluminum substrate Original Research Article
87
Fabrication and properties of aluminumquinoline/oxadiazole heterostructure luminescent layers
88
Fabrication and properties of anode-supported solid oxide fuel cell
89
Fabrication and properties of anode-supported tubular solid oxide fuel cells
90
Fabrication and properties of As-doped ZnO films grown on GaAs(0 0 1) substrates by radio frequency (rf) magnetron sputtering
91
Fabrication and properties of Bi2S3−xSex thermoelectric polycrystals
92
Fabrication and properties of borazine derived boron nitride matrix wave-transparent composites reinforced by 2.5 dimensional fabric of Si–N–O fibers
93
Fabrication and properties of CaZr0.9In0.1O3−δ prepared by an auto-ignition combustion process
94
Fabrication and properties of ceramic coatings for CTR liquid blanket by sputtering method
95
Fabrication and properties of chitin/hydroxyapatite hybrid hydrogels as scaffold nano-materials
96
Fabrication and properties of composites from BST and polypropylene-graft-poly(styrene-stat-divinylbenzene)
97
Fabrication and properties of conductive conjugated polymers/silk fibroin composite fibers
98
Fabrication and properties of continuous unidirectional Mo fiber reinforced TiAl composites by slurry casting and vacuum hot pressing
99
Fabrication and properties of cordierite–mullite bonded porous SiC ceramics
100
Fabrication and properties of cross-linked sulfonated fluorene-containing poly(arylene ether ketone) for proton exchange membrane
101
Fabrication and properties of dispersed carbon nanotube–aluminum composites
102
Fabrication and properties of Fe3Al–Al2O3 graded coatings
103
Fabrication and properties of film-under-gate field emission arrays with SnO2 emitters for flat lamp
104
Fabrication and properties of functionally graded dental implant
105
Fabrication and properties of graded composite rods for biomedical applications
106
Fabrication and properties of high efficiency luminescent nanorods EuPO4·H2O by soft template method
107
Fabrication and properties of high-resistivity porous silicon carbide for SiC power device passivation
108
Fabrication and properties of high-resistivity porous silicon carbide for SiC power device passivation
109
Fabrication and properties of high-strength extruded brass using elemental mixture of Cu–40% Zn alloy powder and Mg particle
110
Fabrication and properties of hybrid membranes based on salts of heteropolyacid, zirconium phosphate and polyvinyl alcohol
111
Fabrication and properties of in situ synthesized particles reinforced aluminum matrix composites of Al–Zr–O–B system
112
Fabrication and properties of injectable β-tricalcium phosphate particles/fibrin gel composite scaffolds for bone tissue engineering
113
Fabrication and properties of inverse opal photonic crystal films of La-doped bismuth titanate Original Research Article
114
Fabrication and properties of La modified AZO powders via a gaseous penetration processing
115
Fabrication and properties of laminated Al2O3/TiC composites
116
Fabrication and properties of lead-free machinable brass with Ti additive by powder metallurgy
117
Fabrication and properties of Lotus-type porous nickel-free stainless steel for biomedical applications
118
Fabrication and properties of low cost ceramic microfiltration membranes for separation of oil and bacteria from its solution
119
Fabrication and properties of machinable 3Y–ZrO2/BN nanocomposites
120
Fabrication and properties of machinable 3Y–ZrO2/BN nanocomposites
121
Fabrication and properties of macroporous tin–cobalt alloy film electrodes for lithium-ion batteries
122
Fabrication and properties of magnetic particles with nanometer dimensions
123
Fabrication and properties of mechanically alloyed and Ni activated sintered W matrix composites reinforced with Y2O3 and TiB2 particles
124
Fabrication and properties of mechanically alloyed oxide-dispersed tungsten heavy alloys
125
Fabrication and properties of mechanically alloyed oxide-dispersed tungsten heavy alloys
126
Fabrication and properties of mechanically milled alumina/aluminum nanocomposites
127
Fabrication and properties of meso-macroporous electrodes screen-printed from mesoporous titania nanoparticles for dye-sensitized solar cells
128
Fabrication and properties of microcapsules and nanocapsules containing n-octadecane
129
Fabrication and properties of microencapsulated-paraffin/gypsum-matrix building materials for thermal energy storage
130
Fabrication and properties of Mn1.56Co0.96Ni0.48O4 free-standing ultrathin chips
131
Fabrication and properties of mullite fiber matrix porous ceramics by a TBA-based gel-casting process
132
Fabrication and properties of Na0.9K0.1NbO3 nanostructures by molten salt synthesis
133
Fabrication and properties of nanocrystalline Co0.5FeNiCrTi0.5 high entropy alloy by MA–SPS technique
134
Fabrication and properties of novel low-melting glasses in the ternary system ZnO–Sb2O3–P2O5
135
Fabrication and Properties of Overcoated Resorcinol-Formaldehyde Shells for OMEGA Experiments
136
Fabrication and properties of piezoelectric composites designed for process monitoring of cement hydration reaction
137
Fabrication and properties of PIP 3D Cf/ZrC–SiC composites
138
Fabrication and properties of PIT Nb-Al and Nb-Sn based superconductors
139
Fabrication and properties of plasma-sprayed Al2O3/TiO2 composite coatings: A role of nano-sized TiO2 addition
140
Fabrication and properties of PLT/PLZT/PLT structures obtained by RF magnetron sputtering
141
Fabrication and properties of poly(polyethylene glycol octadecyl ether methacrylate)
142
Fabrication and properties of poly(vinyl alcohol)-based polymer electrolyte membranes for direct methanol fuel cell applications
143
Fabrication and properties of porous C/SiC composites
144
Fabrication and properties of porous mullite ceramics from calcined carbonaceous kaolin and α-Al2O3
145
Fabrication and properties of porous NiTi shape memory alloys for heavy load-bearing medical applications
146
Fabrication and properties of porous scaffold of magnesium phosphate/polycaprolactone biocomposite for bone tissue engineering
147
Fabrication and properties of porous Si3N4–SiO2 ceramics with dense surface and gradient pore distribution
148
Fabrication and properties of porous β-tricalcium phosphate ceramics prepared using a double slip-casting method using slips with different viscosities
149
Fabrication and properties of reaction-formed SiC by infiltrating molten Si into mesocarbon microbeads-based carbon preform
150
Fabrication and properties of reactively hot pressed ZrB2–SiC ceramics
151
Fabrication and properties of self-assembled films of poly(thiophene) derivatives
152
Fabrication and properties of short carbon fibers reinforced copper matrix composites
153
Fabrication and properties of SiC/mullite composite porous ceramics
154
Fabrication and properties of SiCp/Al composites by pulsed electric current sintering
155
Fabrication and properties of silver-matrix composites reinforced by carbon nanotubes
156
Fabrication and properties of supersonic plasma sprayed Al2O3 coating on porous Si3N4 substrate
157
Fabrication and properties of textured Bi-based cobaltite thermoelectric rods by zone melting
158
Fabrication and properties of the Nb doped Zr-rich lead zirconate titanate ceramics by a heterogenous precipitation method
159
Fabrication and properties of thermal insulating glass fiber reinforced composites from low temperature curable polyphosphate inorganic polymers
160
Fabrication and properties of thermal insulating glass fiber reinforced composites from low temperature curable polyphosphate inorganic polymers
161
Fabrication and properties of thin-shell monolithic piezoelectric ceramic transducers
162
Fabrication and properties of Ti(C,N) based cermets reinforced by nano-CBN particles
163
Fabrication and properties of TiC-based cermet with intra/intergranular microstructure
164
Fabrication and properties of titanium–hydroxyapatite nanocomposites
165
Fabrication and properties of transparent polymethylmethacrylate/cellulose nanocrystals composites
166
Fabrication and properties of trench-structured networked SnO2 nanowire gas sensors
167
Fabrication and properties of tricalcium phosphate/barium hexaferrite composites
168
Fabrication and properties of ultra highly porous silicon carbide by the gelation–freezing method
169
Fabrication and properties of ultrafiltration membranes composed of polysulfone and poly(1-vinylpyrrolidone) grafted silica nanoparticles
170
Fabrication and properties of vitreous silica films prepared by flame hydrolysis deposition
171
Fabrication and properties of W–20Cu alloy reinforced by titanium coated carbon fibers
172
Fabrication and properties of WC–10Co cemented carbide reinforced by multi-walled carbon nanotubes
173
Fabrication and properties of W–Cu alloy reinforced by multi-walled carbon nanotubes
174
Fabrication and properties of ZrB2–SiC–BN machinable ceramics
175
Fabrication and property of chitosan film carrying ethyl cellulose microspheres
176
Fabrication and property study of thin film transistor using rf sputtered ZnO as channel layer
177
Fabrication and purification of carbon nano onions
178
Fabrication and quantum properties of nanostructured silicon
179
Fabrication and reduction-sensitive behavior of polyion complex nano-micelles based on PEG-conjugated polymer containing disulfide bonds as a potential carrier of anti-tumor paclitaxel
180
Fabrication and reflection properties of silicon nanopillars by cesium chloride self-assembly and dry etching
181
Fabrication and release behavior of a novel freeze-gelled chitosan/γ-PGA scaffold as a carrier for rhBMP-2
182
Fabrication and residual stresses characterization of novel non-oxide multilayer ceramics
183
Fabrication and response of high concentration SIMPLE superheated droplet detectors with different liquids
184
Fabrication and Room-Temperature Single-Charging Behavior of Self-Aligned Single-Dot Memory Devices
185
Fabrication and scanning tunneling microscopy studies of the Si(1 1 1)-(√31 × √31)–In surface
186
Fabrication and scintillation properties of highly transparent Pr:LuAG ceramics using Sc,La-based isovalent sintering aids
187
Fabrication and sealing performance of rare-earth containing glass–ceramic seals for intermediate temperature solid oxide fuel cell applications
188
Fabrication and sensing behavior of PVF2 coated-polyaniline sensor for volatile organic compounds
189
Fabrication and shape-evolution of nanostructured TiO2 via a sol–solvothermal process based on benzene–water interfaces
190
Fabrication and simulation of GaSb thermophotovoltaic cells
191
Fabrication and simulation of novel ultra-thin 3D silicon detectors
192
Fabrication and simulation of novel ultra-thin 3D silicon detectors
193
Fabrication and Simulation Properties of [SiO2 - TiO2] / Silan-Cellulose Acetate Nanocomposite for Self-Clean Surfaces Applications
194
Fabrication and sintering characteristics of doctor blade YBCO-Ag tapes
195
Fabrication and soft-magnetic properties of Fe–B–Nb–Y glassy powder compacts by spark plasma sintering technique
196
Fabrication and some physical properties of AgIn5S8 thin films
197
Fabrication and some properties of textured alumina-related compounds by colloidal processing in high-magnetic field and sintering
198
Fabrication and sonocatalytic property of AgPO3 microsphere
199
Fabrication and sonocatalytic property of AgPO3 microsphere
200
Fabrication and spectroscopic properties of Langmuir–Blodgett films of novel zinc complexes with long chain mono (hexadecyl, octadecyl, eicosyl, and docosyl) phthalate
201
Fabrication and spectroscopy results of mercuric iodide Frisch collar detectors
202
Fabrication and spectroscopy results of mercuric iodide Frisch collar detectors
203
Fabrication and SPS microstructures of Ti–45Al–8.5Nb–(W,B,Y) alloying powders
204
Fabrication and stability of porous poly(allylamine) hydrochloride (PAH)/poly(acrylic acid) (PAA) multilayered films via a cleavable-polycation template
205
Fabrication and STM-characterization of novel hybrid materials of DNA/carbon nanotube
206
Fabrication and strain investigation of ZnO nanorods on Si composing sol–gel and chemical bath deposition method Original Research Article
207
Fabrication and structural analysis of aromatic polyimide ultra-thin films with different fluorine contents
208
Fabrication and structural analysis of three-dimensionally well-ordered arrangements of silicon oxycarbide microparticles
209
Fabrication and structural characterization of (Ba,Sr)TiO3 thin films produced by Electrostatic Spray Assisted Vapour Deposition
210
Fabrication and structural characterization of electro-spun polybenzimidazol-derived carbon nanofiber by graphitization
211
Fabrication and structural characterization of metal films coated on cenosphere particles by magnetron sputtering deposition
212
Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique
213
Fabrication and structural characterization of the Langmuir–Blodgett films from a new chitosan derivative containing cinnamate chromophores
214
Fabrication and structural performance of periodic cellular metal sandwich structures
215
Fabrication and structural performance of periodic cellular metal sandwich structures
216
Fabrication and structural properties of porous Cu–YSZ cermets for solid oxide fuel cells
217
Fabrication and structural, electrical characterization of i-ZnO/n-ZnO nanorod homojunctions
218
Fabrication and structure: a study of aligned carbon nanotube/carbon nanocomposites
219
Fabrication and Study of Mechanical Properties of Orange PEEL Reinforced Polymer Composite
220
Fabrication and study of photovoltaic material CuInxGa1−xSe2 bulk and thin films obtained by the technique of close-spaced vapor transport
221
Fabrication and study of pipe-gridded porous metal
222
Fabrication and study of structural, optical and electrical properties of UV curable conductive polyurethane acrylate films containing polyaniline-Co3O4 nanocomposites
223
Fabrication and study of UV-shielding and photocatalytic performance of uniform TiO2/SiO2 core-shell nanobers via single-nozzle co-electrospinning and interface sol-gel reaction
224
Fabrication and study on mechanical properties and fracture behavior of nanometric Al2O3 particle-reinforced A356 composites focusing on the parameters of vortex method
225
Fabrication and study on tribological characteristics of bronze–alumina–silver composite under sea water condition
226
Fabrication and study on tribological characteristics of cast copper–TiO2–boric acid hybrid composites
227
Fabrication and study the performance of solar cell made from new nanostructure phthalocyanine complex thin film
228
Fabrication and study the performance of solar cell made from new nanostructure phthalocyanine complex thin film
229
Fabrication and superhydrophobicity of fluorinated carbon fabrics with micro/nanoscaled two-tier roughness Original Research Article
230
Fabrication and superplasticity of Al2O3/3Y-TZP laminated composite
231
Fabrication and surface characterization of biomimic superhydrophobic copper surface by solution-immersion and self-assembly
232
Fabrication and Surface Characterization of Poly(4-aminodiphenylamine) Film Modified Electrode and its Application for Lead and Cadmium Determination
233
Fabrication and surface characterization of pulsed reactive closed-field unbalanced magnetron sputtered amorphous silicon nitride films
234
Fabrication and surface photovoltage study of hematite microparticles with hollow spindle-shaped structure
235
Fabrication and surface treatment of silicon mold for polymer microarray
236
Fabrication and surface-enhanced Raman scattering (SERS) of Ag/Au bimetallic films on Si substrates
237
Fabrication and sustained release properties of poly(ε-caprolactone) electrospun fibers loaded with layered double hydroxide nanoparticles intercalated with amoxicillin
238
Fabrication and synthesis of solvent-free aluminum oxide colloids by electrical explosion of wires in liquids method
239
Fabrication and synthesis of α-alumina nanopowders by thermal decomposition of ammonium aluminum carbonate hydroxide (AACH)
240
Fabrication and technological properties of nanoporous spinel/forsterite/zirconia ceramic composites
241
Fabrication and tensile behaviors of mini-C/SiC composites reinforced by Si3N4 nanowires
242
Fabrication and tensile properties of in situ TiBw and TiCp hybrid-reinforced titanium matrix composites based on Ti–B4C–C
243
Fabrication and test of a 4 kJ Bi-2223 pulse coil for SMES
244
Fabrication and test of a 70 000 channels electronic pad readout system for multi-step avalanche chambers
245
Fabrication and test of a 70 000 channels electronic pad readout system for multi-step avalanche chambers
246
Fabrication and test of a racetrack magnet using pre-reacted Nb/sub 3/Sn cable
247
Fabrication and test of a superconducting coil for SMES systems
248
Fabrication and test of radial grooved micro heat pipes
249
Fabrication and test of sol–gel based planar oxygen optodes for use in aquatic sediments
250
Fabrication and test of Superconducting Single Photon Detectors
251
Fabrication and test of Superconducting Single Photon Detectors
252
Fabrication and test of the LDX levitation coil
253
Fabrication and test of thin double-layered annulus metal hydride bed
254
Fabrication and testing of a low-cost ceramic-cup soil solution sampler
255
Fabrication and testing of a magnetically actuated micropump
256
Fabrication and testing of a miniature H2/O2 and MeOH/O2 fuel cell
257
Fabrication and testing of a planar microstructured concept module with integrated palladium membranes
258
Fabrication and testing of a SU-8 thermal flow sensor
259
Fabrication and testing of bubble powered micropumps using embedded microheater
260
Fabrication and testing of composite isogrid stiffened cylinder
261
Fabrication and testing of composite isogrid stiffened cylinder
262
Fabrication and testing of coplanar single-chamber micro solid oxide fuel cells with geometrically complex electrodes
263
Fabrication and Testing of Cuff Connections for GFRP Box Sections
264
Fabrication and Testing of Metal Foil Planar Switch
265
Fabrication and testing of nanoporous Si3N4 optical filters for gas sensing applications
266
Fabrication and testing of natural fibre composites: Vakka, sisal, bamboo and banana
267
Fabrication and testing of thin composite isogrid stiffened panel
268
Fabrication and tests of 3He and 2H targets for beam polarization measurement
269
Fabrication and tests of EF conductors for JT-60SA
270
Fabrication and the wear behaviors of the carbon/aluminum composites based on wood templates Original Research Article
271
Fabrication and their photoelectric conversion properties of two kinds of self-assembled monolayers and Langmuir–Blodgett film of mono-substituted C -malonic acid
272
Fabrication and thermal analysis of a copper/diamond/copper thermal spreading device
273
Fabrication and thermal analysis of layer-by-layer micro- and nanotubes
274
Fabrication and thermal annealing behavior of nanoscale ripple fabricated by focused ion beam
275
Fabrication and thermal conductivity of AlN/BN ceramics by spark plasma sintering
276
Fabrication and thermal conductivity of copper matrix composites reinforced with Mo2C or TiC coated graphite fibers
277
Fabrication and thermal degradation behavior of poly(vinyl chloride) particle coated with polythiophene and polyaniline
278
Fabrication and thermal degradation behavior of polystyrene nanoparticles coated with smooth polyaniline
279
Fabrication and thermal expansion properties of ZrW2O8/Zr2WP2O12 composites
280
Fabrication and thermal performance of porous crack composite wick flattened heat pipe
281
Fabrication and thermal properties of a YSZ–NiCr joint with an interlayer of YSZ–NiCr functionally graded material
282
Fabrication and thermoelectric performance of textured n-type Bi2(Te,Se)3 by spark plasma sintering
283
Fabrication and thermoelectric properties of c-axis-aligned Bi0.5Sb1.5Te3 with a high magnetic field Original Research Article
284
Fabrication and thermoelectric properties of fine-grained TiNiSn compounds
285
Fabrication and thermoelectric properties of heavily rare-earth metal-doped SrO(SrTiO3)n (n = 1, 2) ceramics
286
Fabrication and thermoelectric properties of Mg2Si1−xSnx (0 ≤ x ≤ 1.0) solid solutions by solid state reaction and spark plasma sintering
287
Fabrication and thermoelectric properties of Mg2Si-based composites using reduction reaction with additives
288
Fabrication and Thermoelectric Properties of n-Type SbI3-Doped Bi2Te2.85Se0.15 Compounds by Hot Extrusion
289
Fabrication and thermoelectric properties of p-type Bi0.5Sb1.5Te3 compounds by ingot extrusion
290
Fabrication and third-order optical nonlinearities of Na2O–B2O3–SiO2 glasses containing metallic Bi, Bi2O3 and Bi2S3 crystals
291
Fabrication and toughening of NbCr2 matrix composites alloyed with Ni obtained by powder metallurgy
292
Fabrication and transformation of dense SnO2 via laser ablation condensation Original Research Article
293
Fabrication and transport characteristics of long length Y-123 coated conductors processed by IBAD and PLD
294
Fabrication and transport mechanisms of 2-(2,3-dihydro-1,5-dimethyl-3-oxo-2-phenyl-1H-pyrazol-4-ylimino)-2-(4-nitrophenyl)acetonitrile/p-silicon hybrid solar cell
295
Fabrication and Transport Performance Characterization of Chemically-Doped Three-branch Junction Graphene Device
296
Fabrication and transport properties of 50-nm-wide AurCrrGaInAs electrode for electron wave interference device
297
Fabrication and transport properties of ex situ powder-in-tube (PIT) processed (Ba,K)Fe2As2 superconducting wires
298
Fabrication and tribological behavior of sputtering TaN coatings
299
Fabrication and tribological properties of a multiply-alkylated cyclopentane/reduced graphene oxide composite ultrathin film Original Research Article
300
Fabrication and tribological properties of Al2O3/TiC ceramic with nano-textures and WS2/Zr soft-coatings
301
Fabrication and tribological properties of B2O3 as friction reducing coatings for carbon-carbon composites
302
Fabrication and tribological properties of B2O3 as friction reducing coatings for carbon–carbon composites
303
Fabrication and tribological properties of composite coatings produced by lithographic and microbeading methods
304
Fabrication and tribological properties of polyelectrolyte multilayers containing in situ gold and silver nanoparticles
305
Fabrication and tribological properties of super-hydrophobic surfaces based on porous silicon
306
Fabrication and tribological properties of titanium nitride coatings incorporating solid lubricant microreservoirs
307
Fabrication and ultraviolet-shielding properties of silica-coated titania-doped ceria nanoparticles
308
Fabrication and upconversion luminescence of Er3+/Yb3+ codoped TeO2–WO3–Na2O–Nb2O5–Al2O3 glass fibers
309
Fabrication and Usage of a Nanocomposite Scaffold in Segmental Bone Healing: An Animal Model Study
310
Fabrication and use of hollow fiber thin film composite membranes for ethanol dehydration
311
Fabrication and vacuum annealing of transparent conductive Ga-doped Zn0.9Mg0.1O thin films prepared by pulsed laser deposition technique
312
Fabrication and Validation of Novel Fexofenadine Sensor using Alizarin Red S as Ion Exchanger on PVC Matrix for Assay in Pharmaceuticals and Spiked Human Urine Samples
313
Fabrication and Validation of Respiratory Control Belt Using Load Cell Sensor
314
Fabrication and visible-light photochromism of novel hybrid inorganic–organic film based on polyoxometalates and ethyl cellulose
315
Fabrication and voltammetric study of lanthanum 2,6-dichlorophenolindophenol chemically modified screen printed electrodes.: Application for the determination of ascorbic acid Original Research Article
316
Fabrication and wear properties of Fe3Al-based composites
317
Fabrication and wear protection performance of superhydrophobic surface on zinc
318
Fabrication and wear resistance of Al–Cu–Fe quasicrystal-epoxy composite materials
319
Fabrication and wear resistance of Al–Cu–Fe quasicrystal-epoxy composite materials
320
Fabrication approaches for the creation of physical models from microscopy data
321
Fabrication aspects of PLA-CaP/PLGA-CaP composites for orthopedic applications: A review
322
Fabrication at wafer level of miniaturized gas sensors based on SnO2 nanorods deposited by PECVD and gas sensing characteristics
323
Fabrication by electrolytic deposition of platinum black electrocatalyst for oxidation of ammonia in alkaline solution
324
Fabrication by electrolytic deposition of Pt–Ni electrocatalyst for oxidation of ammonia in alkaline solution
325
Fabrication by vacuum die casting and simulation of aluminum bipolar plates with micro-channels on both sides for proton exchange membrane (PEM) fuel cells
326
Fabrication characteristics of an anode-supported thin-film electrolyte fabricated by the tape casting method for IT-SOFC
327
Fabrication Effects on Polysilicon-based Microcantilever Piezoresistivity for Biological Sensing Application
328
Fabrication Fe3 O4 /SiO2 /TiO2 Nanocomposites and Degradation of Rhodamine B Dyes under UV Light Irradiation
329
Fabrication method and thermal conductivity assessment of molybdenum-precipitated uranium dioxide pellets
330
Fabrication method for UO2 pellets with large grains or a single grain by sintering in air
331
Fabrication method of extracting of Co(II) in water samples by synthesis MG-Chi/Fe3O4
332
Fabrication method of parallel mesoporous carbon nanotubes
333
Fabrication method of TiO2–SiO2 hybrid capsules and their UV-protective property
334
Fabrication method, microstructural characteristics, and hardness behavior of an interpenetrating phases hybrid aluminum/alumina-nanodiamond composite
335
Fabrication methods and heat treatment conditions effect on tribological properties of high speed steels
336
Fabrication methods for low-Pt-loading electrocatalysts in proton exchange membrane fuel cell systems
337
Fabrication methods of an engineered microenvironment for analysis of cell–biomaterial interactions
338
Fabrication methods of porous metals for use in orthopaedic applications
339
Fabrication methods to manufacture isotropic Al-Li alloys and products for space and aerospace applications
340
Fabrication methods to manufacture isotropic Al-Li alloys and products for space and aerospace applications
341
Fabrication nanopowders by high-energy ball-milling and low temperature sintering Li2TiO3 microwave dielectrics
342
Fabrication new PES-based mixed matrix nanocomposite membranes using polycaprolactone modified carbon nanotubes as the additive: Property changes and morphological studies Original Research Article
343
Fabrication of Macro- AND Micropore Forming DCPD/ β-TCP Porous Scaffolds: Effect of Setting-Time Reaction and Acidic Calcium Phosphate Solution
344
Fabrication of (Acrylonitrile Butadiene Styrene/Poly Ethylene Glycol) Nanofiltration Membrane: the Effect of PEG Concentration and Operating Conditions on Membrane Performance
345
Fabrication of (Ba–Sr)Bi4Ti4O15 powders and thin films by metal organic solution routes
346
Fabrication of (beta)-Ni(OH)2 and NiO hollow spheres by a facile template-free process
347
Fabrication of (BiNa)0.5TiO3–BaTiO3 textured ceramics by tape casting
348
Fabrication of (Ca + Yb)- and (Ca + Sr)-stabilized α-SiAlON by combustion synthesis
349
Fabrication of (expandable mica)/nylon 6 composites
350
Fabrication of (polyvinyl chloride/cellulose acetate) electrodialysis heterogeneous cation exchange membrane: Characterization and performance in desalination process Original Research Article
351
Fabrication of (Th,U)O2 pellets containing 3 mol% of uranium by gel pelletisation technique
352
Fabrication of (TiB2 − TiC)p/AZ91 magnesium matrix hybrid composite
353
Fabrication of (TMTSF)2PF6 thin crystals in a confined electrode
354
Fabrication of [Fe₃O₄@SiO₂@Si-(CH₂)₃-Bipyr][ZnₓClᵧ] as a Novel Magnetic Catalyst, and Its Utility for Construction of 𝐵𝑖𝑠-Coumarins and 𝐵𝑖𝑠(Pyrazolyl)Methanes
355
Fabrication of <1 1 0> oriented tungsten nano-tips by field-assisted water etching
356
Fabrication of 0.12 mm pMOSFETs on high Ge fraction Si/Si1 xGex/Si(1 0 0) heterostructure with ultrashallow source/drain formed using B-doped SiGe CVD
357
Fabrication of 1, 1-Dimethylhydrazine Gas sensor Based
358
Fabrication of 10 mm diameter fully dense Al86Ni6Y4.5Co2La1.5 bulk metallic glass with high fracturestrength
359
Fabrication of 100 nm gate length MOSFETʹs using a novel carbon nanotube-based nano-lithography
360
Fabrication of 100nm Nano Pillars on Silicon
361
Fabrication of 15 nm curvature radius polymer tip probe on an optical fiber via two-photon polymerization and O2-plasma ashing
362
Fabrication of 184W target on carbon backing
363
Fabrication of 184W target on carbon backing
364
Fabrication of 1D nanofluidic channels on glass substrate by wet etching and room-temperature bonding Original Research Article
365
Fabrication of 2024 aluminum spun tube using a thermomechanical treatment process
366
Fabrication of 2-Chloropyridine-Functionalized Fe 3 O 4 /Amino-Silane Core–Shell Nanoparticles
367
Fabrication of 2D C/ZrC–SiC composite and its structural evolution under high-temperature treatment up to 1800 °C
368
Fabrication of 2-D photonic crystals using azo polymers
369
Fabrication of 3,4-dihydropyrimidin-2-(1H)-ones/thione compounds via Cu2V2O7 nanocatalyst synthesized by solid state method
370
Fabrication of 3.9–4.2 μm mid-infrared surface emitting PbSe/PbEuTe quantum dot lasers using molecular beam epitaxy
371
Fabrication of 3D biocompatible/biodegradable micro-scaffolds using dynamic mask projection microstereolithography
372
Fabrication of 3D carbon microstructures using glassy carbon microspheres and organic precursors
373
Fabrication of 3D chitosan–hydroxyapatite scaffolds using a robotic dispensing system
374
Fabrication of 3D detectors with columnar electrodes of the same doping type
375
Fabrication of 3D detectors with columnar electrodes of the same doping type
376
Fabrication of 3-D gelatin-patterned glass substrates with layer-by-layer and lift-off (LbL-LO) technology
377
Fabrication of 3-D gelatin-patterned glass substrates with layer-by-layer and lift-off (LbL-LO) technology
378
Fabrication of 3D micro-cantilevers based on MBE-grown strained semiconductor layers
379
Fabrication of 3-D microstructures with a catalytic surface composed of an ion-implanted layer
380
Fabrication of 3D photonic structure on glass materials by femtosecond laser modification with HF etching process
381
Fabrication of 5 V lithium rechargeable micro-battery
382
Fabrication of 50 nm high performance strained-SiGe pMOSFETs with selective epitaxial growth
383
Fabrication of 5052Al/Al2O3 nanoceramic particle reinforced composite via friction stir processing route
384
Fabrication of 550 nm gratings in fused silica by laser induced backside wet etching technique
385
Fabrication of 80 mm diameter-sized solid oxide fuel cells using a water-based NiO–YSZ slurry
386
Fabrication of 8-YSZ thin-wall tubes by powder extrusion moulding for SOFC electrolytes
387
Fabrication of 9,10-phenanthrenequinone/carbon nanotubes composite modified electrode and its electrocatalytic property to the reduction of iodate
388
Fabrication of 90,94Zr targets on carbon backing
389
Fabrication of 90,94Zr targets on carbon backing
390
Fabrication of 94Zr thin target for recoil distance doppler shift method of lifetime measurement
391
Fabrication of 94Zr thin target for recoil distance doppler shift method of lifetime measurement
392
FABRICATION OF A “CONE PAA NANOSTRUCTURE” BY GRADUAL DECREASE OF VOLTAGE
393
Fabrication of a Au@SnO2 core–shell structure for gaseous formaldehyde sensing at room temperature
394
Fabrication of a bilayer potentiometric phosphate biosensor by cross-link immobilization with bovine serum albumin and glutaraldehyde Original Research Article
395
Fabrication of a bimetallic Cu/Pt particle-modified carbon nanotube paste electrode and its use for the electrocatalytic oxidation of methanol
396
Fabrication of a bioengineered corneal endothelial cell sheet using chitosan/polycaprolactone blend membranes
397
Fabrication of a Capacitance-Based Tactile Sensor with Biomedical Applications
398
Fabrication of a cell array on ultrathin hydrophilic polymer gels utilising electron beam irradiation and UV excimer laser ablation
399
Fabrication of a chemically modified electrode containing 12-molybdophosphoric acid by the sol–gel technique and its application as an amperometric detector for iodate Original Research Article
400
Fabrication of a chemosensor array on a microfluidic device by a simple gel-based method
401
Fabrication of a complex InAs ring-and-dot structure by droplet epitaxy
402
Fabrication of a composite nano-ultrathin film of poly-phenylene-vinylene and C60 derivative
403
Fabrication of a composite powder and its application as an active brazing alloy
404
Fabrication of a composite system combining solid lipid nanoparticles and thermosensitive hydrogel for challenging ophthalmic drug delivery
405
Fabrication of a composite vascular scaffold using electrospinning technology
406
Fabrication of a Configurable, Single-Use Microfluidic Device
407
Fabrication of a covalently attached multilayer film electrode containing cobalt phthalocyanine and its application as a potentiometric sensor of iodide ion Original Research Article
408
Fabrication of a covalently attached multilayer film electrode containing cobalt phthalocyanine and its electrocatalytic oxidation of hydrazine
409
Fabrication of a Cranial Prosthesis Combined with an Ocular Prosthesis Using Rapid Prototyping: A Case Report
410
Fabrication of a customized impression metal jig for an implant‑supported overdenture with a milled bar
411
Fabrication of a dense La0.2Sr0.8CoO3−δ/CoO composite membrane by utilizing the electroless cobalt plating technique
412
Fabrication of a few-electron In0.56Ga0.44As vertical quantum dot with an Al2O3 gate insulator
413
Fabrication of a field effect transistor structure using charge-ordered organic materials α-(BEDT-TTF)2I3 and α′-(BEDT-TTF)2IBr2
414
Fabrication of a first wall panel by diffusion bonding
415
Fabrication of a flower-like Pd/CeO2 material with improved three-way catalytic performance
416
Fabrication of a full-size mock-up for inboard 10° section of ITER vacuum vessel thermal shield
417
Fabrication of a gecko seta-like structure using polydimethylsiloxane
418
Fabrication of a gold pattern with a nanoscale edge by using heptanethiol self-assembled monolayers and a metastable helium beam
419
Fabrication of a graphene field effect transistor array on microchannels for ethanol sensing
420
Fabrication of a graphene oxide–gold nanorod hybrid material by electrostatic self-assembly for surface-enhanced Raman scattering Original Research Article
421
Fabrication of a graphene–cuprous oxide composite
422
Fabrication of a Hard Tissue Replacement Using Natural Hydroxyapatite Derived from Bovine Bones by Thermal Decomposition Method
423
Fabrication of a He-cooled divertor module for DEMO reactor
424
Fabrication of a high hydrophobic PVDF membrane via nonsolvent induced phase separation Original Research Article
425
Fabrication of a high lithium ion conducting lithium borosilicate glass
426
Fabrication of a high strength Mg–11Gd–4.5Y–1Nd–1.5Zn–0.5Zr (wt%) alloy by thermomechanical treatments
427
Fabrication of a high-field short-period superconducting undulator
428
Fabrication of a high-field short-period superconducting undulator
429
Fabrication of a highly selective and sensitive Gd(III)-PVC membrane sensor based on N-(2-pyridyl)-N′-(4-nitrophenyl)thiourea
430
Fabrication of a highly selective cadmium (II) sensor based on 1,13-bis(8-quinolyl)-1,4,7,10,13-pentaoxatridecane as a supramolecular ionophore
431
Fabrication of a highly selective Eu(III) membrane sensor based on a new S–N hexadentates Schiffʹs base
432
Fabrication of a highly sensitive electrochemiluminescence lactate biosensor using ZnO nanoparticles decorated multiwalled carbon nanotubes
433
Fabrication of a highly sensitive sensor electrode using a nano-gapped gold particle film
434
Fabrication of a highly sensitive sumatriptan sensor based on ultrasonic-electrodeposition of Pt nanoparticles on the ZrO2 nanoparticles modified carbon paste electrode
435
Fabrication of a high-performance hip prosthetic stem using β Ti–33.6Nb–4Sn
436
Fabrication of a high-strength hydrogel with an interpenetrating network structure
437
Fabrication of a hybrid graphene/layered double hydroxide material Original Research Article
438
Fabrication of a large area monolayer of silica particles on a sapphire substrate by a spin coating method
439
Fabrication of a large-area, flexible and color-neutral single-wall carbon nanotube:sodium dodecylbenzene sulfonate/poly-(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) transparent conductive film having a new conduction mechanism
440
Fabrication of a layered hybrid membrane using an organosilica separation layer on a porous polysulfone support, and the application to vapor permeation
441
Fabrication of a Lead All Solid State Sensor for ppb Level Monitoring of Aqueous Lead Samples
442
Fabrication of a Li4SiO4–Pb tritium breeding material
443
Fabrication of a lithium chloride solution based composite supported liquid membrane and its moisture permeation analysis
444
Fabrication of a logic gate circuit based on ambipolar field-effect transistors with thin films of C60 and pentacene
445
Fabrication of a material with composition gradient for metal/ceramic assembly
446
Fabrication of a MEMS-based separation module for liquid chromatography
447
Fabrication of a mesophase pitch-based submicron carbon-fiber web
448
Fabrication of a mesoporous Pt-carbon catalyst by the direct templating of mesoporous Pt-alumina for the methanol electro-oxidation
449
Fabrication of a methanol chemical sensor based on hydrothermally prepared α-Fe2O3 codoped SnO2 nanocubes
450
Fabrication of a microfluidic chip containing dam, weirs and gradient generator for studying cellular response to chemical modulation
451
Fabrication of a micro-optical coupling structure by laser ablation
452
Fabrication of a micro-pin array with high density and high hardness by combining mechanical peck-drilling and reverse-EDM
453
Fabrication of a model continuously graded co-electrospun mesh for regeneration of the ligament–bone interface
454
Fabrication of a molecularly imprinted polymer sensor by self-assembling monolayer/mediator system Original Research Article
455
Fabrication of a Multilayer Film Electrode Containing Quaternized Poly(4-vinylpyridine) Complexed with [Os(bpy)2CI]+/2 and Its Electrocatalytic Oxidation of L-Cysteine
456
Fabrication of a Multilayer Film Electrode Containing Quaternized Poly(4-vinylpyridine) Complexed with [Os(bpy)2CI]+/2 and Its Electrocatalytic Oxidation of L-Cysteine
457
Fabrication of a multi-layered carbon nanotube/SiC stack structure
458
Fabrication of a multi-walled carbon nanotube-deposited glass fiber air filter for the enhancement of nano and submicron aerosol particle filtration and additional antibacterial efficacy
459
Fabrication of a nano-magnet on a piezo-driven tip in a TEM sample holder
460
Fabrication of a nanophotonic quantum dot waveguide and photodetector integrated device
461
Fabrication of a Nanostructure Voltammetric Sensor for Carmoisine Analysis as a Food Dye Additive
462
Fabrication of a nanostructure-based electrochemical sensor for simultaneous determination of N-acetylcysteine and acetaminophen
463
Fabrication of a new composite orthodontic archwire and validation by a bridging micromechanics model
464
Fabrication of a new electrochemiluminescent sensor for fentanyl citrate based on glassy carbon microspheres and ionic liquid composite paste electrode Original Research Article
465
Fabrication of a new fluorescent polymeric nanoparticle containing naphthalimide and investigation on its interaction with bovine serum albumin
466
Fabrication of a new polyaniline grafted multi-wall carbon nanotube modified electrode and its application for electrochemical detection of hydrogen peroxide Original Research Article
467
Fabrication of a New Selective Optical Sensor for Cobalt Determination Using 1-Nitroso-2-naphthol and Monitoring of Cobalt in Water Samples
468
Fabrication of a New Type of Double-Shell Target Having a PVA Inner Layer
469
Fabrication of a new type of optical medium with metallic nanolayers by ion implantation technique and vacuum evaporation
470
Fabrication of a nitrided coating on a novel Ni–Cr nanocomposite with increased surface hardness
471
Fabrication of a non-cement binder using slag, palm oil fuel ash and rice husk ash with sodium hydroxide
472
Fabrication of a nonenzymatic cholesterol biosensor using carbon nanotubes from coconut oil
473
Fabrication of a novel 1,3-bis(p-hydrazonobenzoicacid)indane Langmuir–Blodgett film and organic vapor sensing properties
474
Fabrication of a novel 2D-graphene/2D-NiO nanosheet-based hybrid nanostructure and its use in highly sensitive NO2 sensors
475
Fabrication of a novel bio-adsorbent based on the yellow membrane of chicken feet for cationic dye of methylene blue removal: adsorption, equilibrium, kinetic and thermodynamic studies
476
Fabrication of a Novel Electrochemical Nanosensor for Voltammetric Determination of Naproxen
477
Fabrication of a Novel Electrochemical Sensor for Simultaneous Determination of Toxic Lead and Cadmium Ions
478
Fabrication of a novel electrochemiluminescence glucose biosensor using Au nanoparticles decorated multiwalled carbon nanotubes
479
Fabrication of a novel glucose biosensor based on Pt nanoparticles-decorated iron oxide-multiwall carbon nanotubes magnetic composite
480
Fabrication of a novel immunosensor using functionalized self-assembled monolayer for trace level detection of TNT by surface plasmon resonance
481
Fabrication of a novel impedance cell sensor based on the polystyrene/polyaniline/Au nanocomposite
482
FABRICATION OF A NOVEL MEMS CAPACITIVE MICROPHONE USING LATERAL SLOTTED DIAPHRAGM
483
Fabrication of a novel nanocomposite based on sol–gel process for hollow fiber-solid phase microextraction of aflatoxins: B1 and B2, in cereals combined with high performane liquid chromatography–diode array detection
484
Fabrication of a novel organic-inorganic hybrid nanocatalyst and its application for the synthesis of bis(pyrazolyl)methanes
485
Fabrication of a novel Pd/γ-alumina graded membrane by electroless plating on nanoporous γ-alumina
486
Fabrication of a Novel Phenolic Compound Biosensor Using Laccase Enzyme and Metal-organic Coordination Polymers
487
Fabrication of a novel porous PGA-chitosan hybrid matrix for tissue engineering
488
Fabrication of a novel scaffold of clotrimazole-microemulsion-containing nanofibers using an electrospinning process for oral candidiasis applications
489
Fabrication of a Novel Shaped Graphene/poly (Evan’s blue) Composite Chemical Sensor for the Electrocatalytic Boost up of Neurotransmitter (Dopamine): A Voltammetric Investigation
490
Fabrication of a novel temperature sensitive poly(N-isopropyl-3-butenamide) hydrogel
491
Fabrication of a novel thin-film nanocomposite (TFN) membrane containing MCM-41 silica nanoparticles (NPs) for water purification
492
Fabrication of a one-dimensional superlattice by alternative deposition of dioxime platinum complexes on KBr (100) surface
493
Fabrication of a phospholipid membrane-mimetic film on the luminal surface of an ePTFE vascular graft
494
Fabrication of a polymer microstructure by a modified DXRL process
495
Fabrication of a polymer-based biodegradable stent using a CO2 laser
496
Fabrication of a protein film by electrospray deposition method and investigation of photochemical properties by persistent spectral hole burning
497
Fabrication of a prototype humidity-sensitive capacitor via layer-by-layer self-assembling technique
498
Fabrication of a P-stabilized InP(0 0 1) surface at low pressure and temperature using t-butylphosphine (TBP)
499
Fabrication of a PVC membrane samarium(III) sensor based on N,N′,N″-tris(4-pyridyl)trimesic amide as a selectophore
500
Fabrication of a quantum dot-polymer matrix by layer-by-layer conjugation
501
Fabrication of a quantum point contact by the dynamic plowing technique and wet-chemical etching
502
Fabrication of a quantum point contact by the dynamic plowing technique and wet-chemical etching
503
Fabrication of a random convex-lens-shaped microstructure using a laser ablation
504
Fabrication of a repulsive-type magnetic bearing using a novel arrangement of permanent magnets for vertical-rotor suspension
505
Fabrication of a Reversible Protein Array Directly from Cell Lysate Using a Stimuli-Responsive Polypeptide
506
Fabrication of a room-temperature H2S gas sensor based on PPy/WO3 nanocomposite films by in-situ photopolymerization
507
Fabrication of a room-temperature NO2 gas sensor based on WO3 films and WO3/MWCNT nanocomposite films by combining polyol process with metal organic decomposition method
508
FABRICATION OF A SCREW-RETAINED HYBRID PROSTHESIS FOLLOWING TREATMENT OF PERI-IMPLANT DEFECTS: A CASE REPORT
509
Fabrication of a Selective and Sensitive Electrochemical Sensor Modified with Magnetic Molecularly Imprinted Polymer for Amoxicillin
510
Fabrication of a sensor chip containing Au and Ag electrodes and its application for sensitive Hg(II) determination using chronocoulometry Original Research Article
511
Fabrication of a short carbon fiber/gel composite that responds to a magnetic field Original Research Article
512
Fabrication of a SiC/Si/MoSi2 multi-coating on graphite materials by a two-step technique
513
Fabrication of a silica ceramic membrane using the aerosol flame deposition method for pretreatment focusing on particle control during desalination Original Research Article
514
Fabrication of a silicon based electroluminescent device
515
Fabrication of a Simple Cast-deposited Nafion/multi-walled Carbon Nanotube Composite Film as a Sensor for Voltammetric Determination of Pethidine
516
Fabrication of a single-walled carbon nanotube-modified glassy carbon electrode and its application in the electrochemical determination of epirubicin
517
Fabrication of a small animal restraint for synchrotron biomedical imaging using a rapid prototyper
518
Fabrication of a small animal restraint for synchrotron biomedical imaging using a rapid prototyper
519
Fabrication of a solid-state cell using vitamin C as sensitizer
520
Fabrication of a solution-processed IGZO/NiO p-n diode
521
Fabrication of a stable inorganic–organic hybrid multilayer film with uniform and dense inorganic nanoparticle deposition
522
Fabrication of a stable poly(vinylpyrrolidone)/poly(urushiol) multilayer ultrathin film through layer-by-layer assembly and photo-induced polymerization
523
Fabrication of a stable superhydrophobic film constructed by poly(vinylpyrrolidone)/poly(urushiol)-CuS through layer-by-layer assembly
524
Fabrication of a strain sensor for bone implant failure detection based on piezoresistive doped nanocrystalline silicon
525
Fabrication of a strained is on sub-10-nm-thick SiGe-on-insulator virtual substrate
526
Fabrication of a Sulfite Biosensor by the Use of Conducting Polymer
527
Fabrication of a superconducting MEM shunt switch for RF applications
528
Fabrication of a superhydrophobic carbon nanotube coating with good reusability and easy repairability
529
Fabrication of a superhydrophobic polypropylene membrane by deposition of a porous crystalline polypropylene coating
530
Fabrication of a superhydrophobic surface on a wood substrate
531
Fabrication of a super-hydrophobic surface on metal using laser ablation and electrodeposition
532
Fabrication of a superhydrophobic surface via spraying with polystyrene and multi-walled carbon nanotubes
533
Fabrication of a superhydrophobic ZnO nanorod array film on cotton fabrics via a wet chemical route and hydrophobic modification
534
Fabrication of a switchable nano-surface composed of acidic and basic block-polypeptides
535
Fabrication of a tantalum-clad tungsten target for KENS
536
Fabrication of a tantalum-clad tungsten target for LANSCE
537
Fabrication of a thermoplastic multilayer microfluidic chip
538
Fabrication of a thick surface layer of Al3Ti on Ti substrate by reactive-pulsed electric current sintering
539
Fabrication of a thin catalyst layer using organic solvents
540
Fabrication of a three-dimensional complex carbon nanoneedle from carbon nanowalls
541
Fabrication of a TiO2 photocatalyst by anodic oxidation of Ti in an acetic acid electrolyte
542
Fabrication of a TiO2/carbon nanowall heterojunction and its photocatalytic ability Original Research Article
543
Fabrication of a tunable glucose biosensor based on zinc oxide/chitosan-graft-poly(vinyl alcohol) core-shell nanocomposite
544
Fabrication of a versatile microanalytical system without need for clean room conditions
545
Fabrication of a versatile microanalytical system without need for clean room conditions Original Research Article
546
Fabrication of a V-groove on the optical fiber connector using a miniaturized machine tool
547
Fabrication of a working Bi-2223 superconducting magnet cooled by liquid nitrogen Original Research Article
548
Fabrication of a ZrC–SiC matrix for ceramic matrix composites and its properties
549
Fabrication of a ZrC–SiC matrix for ceramic matrix composites via in-situ reaction and its application
550
Fabrication of A356 aluminum alloy matrix composite with CNTs/Al2O3 hybrid reinforcements
551
Fabrication of AA1060/Al2O3 Composites by Warm Accumulative Roll Bonding Process and Investigation of its Mechanical Properties and Microstructural Evolution
552
Fabrication of AA1060/Al2O3 Composites by Warm Accumulative Roll Bonding Process and Investigation of its Mechanical Properties and Microstructural Evolution
553
Fabrication of a-AlO(OH) SiO2 with core-shell structures by heterogeneous nucleation-and-growth processing
554
Fabrication of activated carbon nanoparticles from PAN precursor
555
Fabrication of activated carbon nanoparticles from PAN precursor
556
Fabrication of activated carbons with well-defined macropores derived from sulfonated poly(divinylbenzene) networks Original Research Article
557
Fabrication of adhesive superhydrophobic Ni-Cu-P alloy coatings with high mechanical strength by one step electrodeposition
558
Fabrication of advanced SiC fiber/F-CVI SiC matrix composites with SiC/C multi-layer interphase
559
Fabrication of Ag nanoclusters in single-crystal MgO by high-energy ion implantation
560
Fabrication of Ag nanoparticles by γ-irradiation: Application to surface-enhanced Raman spectroscopy of fungicides
561
Fabrication of Ag nanoparticles dispersed in PVA nanowire mats by microwave irradiation and electro-spinning
562
Fabrication of Ag nanoparticles-coated macroporous SiO2 structure by using polystyrene spheres
563
Fabrication of Ag/polypyrrole coaxial nanocables through common ions adsorption effect
564
Fabrication of Ag/TiO2 nanotube array with enhanced photo-catalytic degradation of aqueous organic pollutant
565
Fabrication of Ag/Tl–Ba–Ca–CuO/CdSe nanostructure by electro-deposition technique
566
Fabrication of agar-gel microelectrodes and their application in the study of ion transfer across the agar–water ∣ 1,2-dichloroethane interface
567
Fabrication of Al alloy matrix composite reinforced with subsive-sized Al2O3 particles by the in situ displacement reaction using high-energy ball-milled powder
568
Fabrication of Al nanoparticles and their electrical properties studied by capacitance–voltage measurements
569
Fabrication of Al/A206–Al2O3 nano/micro composite by combining ball milling and stir casting technology
570
Fabrication of Al/Al2O3 composites by in-situ powder metallurgy (IPM)
571
Fabrication of Al/Al2O3/TiC hybrid composite by anodizing and accumulative roll bonding processes and investigation of its microstructure and mechanical properties
572
Fabrication of Al/Al3Fe composites by plasma synthesis method
573
Fabrication of Al/Al3Fe composites by plasma synthesis method
574
Fabrication of Al/Al3Fe composites by plasma synthesis method
575
Fabrication of Al/Al3Mg2 composite by vacuum annealing and accumulative roll-bonding process
576
Fabrication of Al/AlN composites by in situ reaction
577
Fabrication of Al/Cup composite by accumulative roll bonding process and investigation of mechanical properties
578
Fabrication of Al/MgO/C and C/MgO/InSe/C tunneling barriers for tunable negative resistance and negative capacitance applications
579
Fabrication of Al/Ni/Cu composite by accumulative roll bonding and electroplating processes and investigation of its microstructure and mechanical properties
580
Fabrication of Al–2 vol% Al2O3/SiC hybrid composite via accumulative roll bonding (ARB): An investigation of the microstructure and mechanical properties
581
Fabrication of Al2O3 nanofluid by a plasma arc nanoparticles synthesis system
582
Fabrication of Al2O3/TiB2/AlN/TiN and Al2O3/TiC/AlN composites
583
Fabrication of Al2O3–20 vol.% Al nanocomposite powders using high energy milling and their sinterability
584
Fabrication of Al2O3–Al composites by infiltration method and their characteristic
585
Fabrication of Al2O3-SiCw in situ composite through a new combustion technique
586
Fabrication of Al2O3–ZrB2 in situ composite by SHS dynamic compaction: A novel approach
587
Fabrication of Al6061 composite with high SiC particle loading by semi-solid powder processing Original Research Article
588
Fabrication of Al7075-MWCNT Composite Powder by Recycling Aluminum Alloy Chips Via High Energy Milling and Alloying
589
Fabrication of Al–7wt%Si–0.4wt%Mg/SiC nanocomposite powders and bulk nanocomposites by high energy ball milling and powder metallurgy
590
Fabrication of Al-based hybrid composites reinforced with SiC whiskers and SiC nanoparticles by squeeze casting
591
Fabrication of alginate/nanoTiO2 needle composite scaffolds for tissue engineering applications
592
Fabrication of AlGraphiteAl2O3 Surface Hybrid Nano Composite by Friction Stir Processing and Investigating The Wear and Microstructural Properties of The Composite
593
Fabrication of aligned and molecularly oriented electrospun polyacrylonitrile nanofibers and the mechanical behavior of their twisted yarns
594
Fabrication of aligned carbon nanotubes on Cu catalyst by dc plasma-enhanced catalytic decomposition
595
Fabrication of aligned ferrite nanofibers by magnetic-field-assisted electrospinning coupled with oxygen plasma treatment
596
Fabrication of aligned lamellar porous alumina using directional solidification of aqueous slurries with an applied electrostatic field
597
Fabrication of aligned microwire arrays of perylene bisimide by micromolding in capillary
598
Fabrication of alignment layer free flexible liquid crystal cells using thermal nanoimprint lithography
599
Fabrication of alignment structures for a fiber resonator by use of deep-ultraviolet lithography
600
Fabrication of all oxide transparent p–n homojunction using bipolar CuInO2 semiconducting oxide with delafossite structure
601
Fabrication of all solid-state lithium polymer secondary batteries using PEG-borate/aluminate ester as plasticizer for polymer electrolyte
602
Fabrication of all solid-state rechargeable lithium battery and its electrochemical properties
603
Fabrication of all YBaCuO trilayer Josephson junctions with YBaCuO wiring layer
604
Fabrication of AlLi and Al2Li3/Al4Li9 intermetallic compounds by molten salt electrolysis and their application for hydrogen generation from water
605
Fabrication of Al–LiAlO2 metal matrix composites and crystalline γ-LiAlO2
606
Fabrication of alloys and superlattices based on ZnO towards ultraviolet laser
607
Fabrication of alloys and superlattices based on ZnO towards ultraviolet laser
608
Fabrication of all-solid-state battery using Li5La3Ta2O12 ceramic electrolyte
609
Fabrication of all-solid-state electrochemical microcapacitors
610
Fabrication of all-solid-state thin-film secondary cells using hexacyanometallate-based electrode materials
611
Fabrication of alumina ceramics from powders made by sol–gel type hydrolysis in microemulsions
612
Fabrication of alumina nanofibers by precipitation reaction combined with heterogeneous azeotropic distillation process
613
Fabrication of alumina parts by electrophoretic deposition from ethanol and aqueous suspensions
614
Fabrication of alumina/zirconia functionally graded material: From optimization of processing parameters to phenomenological constitutive models
615
Fabrication of alumina-based ceramic foams utilizing superplasticity
616
Fabrication of aluminium foams from powder by hot extrusion and foaming
617
Fabrication of Aluminum 5083/SiC Surface Composite on Tungsten Inert Gas Weld Joint by Novel Direct Friction Stir Processing Technique
618
Fabrication of aluminum carbide nanowires by a nano-template reaction Original Research Article
619
Fabrication of aluminum foam stabilized by copper-coated carbon fibers
620
Fabrication of Aluminum Rectangular Twist Waveguides: Experimental Investigation and FEM Simulation
621
Fabrication of aluminum/copper clad composite using hot hydrostatic extrusion process and its material characteristics
622
Fabrication of aluminum/copper clad composite using hot hydrostatic extrusion process and its material characteristics
623
Fabrication of aluminum/copper clad composite using hot hydrostatic extrusion process and its material characteristics
624
Fabrication of Aluminum/Gr Composites and Investigation of its Tribological and Wear Properties
625
Fabrication of aluminum–alumina metal matrix composites via cold gas dynamic spraying at low pressure followed by friction stir processing
626
Fabrication of aluminum–carbon nanotube composites and their electrical properties Original Research Article
627
Fabrication of AMCs by spray forming: Setting of cognition and social parameters to accelerate the convergence in optimization of spray forming process
628
Fabrication of AMoO4 (A = Ba, Sr) film on Mo substrate by solution reaction assisted ball-rotation
629
Fabrication of amorphous iron-boron films by electroless plating
630
Fabrication of amorphous pharmaceutical materials by electrospraying into reduced pressure
631
Fabrication of amorphous silicon carbide films using VHF-PECVD for triple-junction thin-film solar cell applications
632
Fabrication of amorphous silicon films for arrayed waveguide grating application
633
Fabrication of Amorphous Silicon Microgap Structure for Energy Saving Devices
634
Fabrication of amorphous silicon nanocones by bias-enhanced microwave plasma CVD
635
Fabrication of amperometric xanthine biosensors based on direct chemistry of xanthine oxidase
636
Fabrication of AMS-02 microstrip detectors at ITC-irst
637
Fabrication of AMS-02 microstrip detectors at ITC-irst
638
Fabrication of an alpha particle counter: spin coated films of synthesized nanocrystalline cadmium tungstate powder
639
Fabrication of an aluminum, Caribbean-style, musical pan: Metallurgical and acoustical characterization
640
Fabrication of an ammonia gas sensor using inkjet-printed polyaniline nanoparticles
641
Fabrication of an amperometric ascorbate biosensor using egg shell membrane bound Lagenaria siceraria fruit ascorbate oxidase
642
Fabrication of an Amperometric Glucose Biosensor Based on a Prussian Blue/Carbon Nanotube/Ionic Liquid Modified Glassy Carbon Electrode
643
Fabrication of an annealable platinum (111) single crystal ultramicroelectrode
644
Fabrication of an anode-supported yttria-stabilized zirconia thin film for solid-oxide fuel cells via wet powder spraying
645
Fabrication of an asymmetric hollow particle with a thermo-sensitive PNIPAM inside corona
646
Fabrication of an asymmetric polyimide hollow fiber with a defect-free surface skin layer
647
Fabrication of an eco-friendly composite nanogenerator for self-powered photosensor applications
648
Fabrication of an Eficient Antioxidant Capacity Assay Using Peroxidase-mimicking Trivalent DNAzyme
649
Fabrication of an electrically conductive mixed self-assembled monolayer and its application in an electrochemical immunosensor
650
Fabrication of an electrically conductive mixed self-assembled monolayer and its application in an electrochemical immunosensor
651
Fabrication of an electrochemical cell based on Rhodamine B Dye for low power applications
652
Fabrication of an Electrochemical Immunosensor for Determination of Human Chorionic Gonadotropin Based on PtNPs/Cysteamine/AgNPs as an Efficient Interface
653
Fabrication of an electrochemical immunosensor with self-assembled peptide nanotubes
654
Fabrication of an Electrochemical Sensor Based on a New Nano-ion Imprinted Polymer for Highly Selective and Sensitive Determination of Molybdate
655
Fabrication of an electrochemical sensor based on computationally designed molecularly imprinted polymers for determination of cyanazine in food samples Original Research Article
656
Fabrication of an Implant-Supported Orbital Prosthesis with Bar-Magnetic Attachment: A Clinical Report
657
Fabrication of an integrated microfluidic device based on a heat-sensitive poly(N-isopropylacrylamide) polymer and micromachining protocols for programmed bio-molecular patterning
658
Fabrication of an integrated optical Mach–Zehnder interferometer based on refractive index modification of polymethylmethacrylate by krypton fluoride excimer laser radiation
659
Fabrication of an integrated ΔE-E-silicon detector by wafer bonding using cobalt disilicide
660
Fabrication of an integrated ΔE-E-silicon detector by wafer bonding using cobalt disilicide
661
Fabrication of an intelligent superhydrophobic surface based on ZnO nanorod arrays with switchable adhesion property
662
Fabrication of an iron(III) PVC-membrane sensor based on bis-benzilthiocarbohydrazide as a selective sensing material
663
Fabrication of an Isoqrid fan Containment case
664
Fabrication of an Isoqrid fan Containment case
665
Fabrication of an ITER middle-scaled shielding blanket module mock-up
666
Fabrication of an optically transparent super-hydrophobic surface via embedding nano-silica
667
Fabrication of an optimized fluorescer encapsulated polymer coated gelatin nanoparticle and study of its retarded release properties
668
Fabrication of an organic light-emitting diode (OLED) from a two-dimensional lead(II) coordination polymer
669
Fabrication of an organic thin-film transistor by direct deposit of a pentacene layer onto a silicon substrate Original Research Article
670
Fabrication of an organic-inorganic hybrid LB film of a magnetic polyoxometalate
671
Fabrication of an oxidation-resistant β-NiAl coating on γ-TiAl
672
Fabrication of an oxysulfide of bismuth Bi2O2S and its photocatalytic activity in a Bi2O2S/In2O3 composite
673
Fabrication of an ultramicrosensor for measurement of extracellular myocardial superoxide Original Research Article
674
Fabrication of an ultrasensitive impedimetric buprenorphine hydrochloride biosensor from computational and experimental angles
675
Fabrication of anatase-type TiO2 films by reactive pulsed laser deposition for photocatalyst application
676
Fabrication of and performance studies on a low cost solar cooker having an inclined aperture plane
677
Fabrication of anode supported SOFC using plasma-sprayed films of the apatite-type lanthanum silicate as an electrolyte
678
Fabrication of anode-supported protonic ceramic fuel cell with Ba(Zr0.85Y0.15)O3−δ–Ba(Ce0.9Y0.1)O3−δ dual-layer electrolyte
679
Fabrication of anode-supported tubular Ba(Zr0.1Ce0.7Y0.2)O3−δ cell for intermediate temperature solid oxide fuel cells
680
Fabrication of anodic aluminium oxide template and the generation of magnetic Co nanowires within it
681
Fabrication of anodic aluminum oxide with incorporated chromate ions
682
Fabrication of antenna-coupled transition edge polarization-sensitive bolometer arrays
683
Fabrication of antenna-coupled transition edge polarization-sensitive bolometer arrays
684
Fabrication of antenna-coupled transition edge sensors for polarimeter applications
685
Fabrication of antenna-coupled transition edge sensors for polarimeter applications
686
Fabrication of anti‑bacterial cotton bandage using biologically synthesized nanoparticles for medical applications
687
Fabrication of antibacterial cotton fibres loaded with silver nanoparticles via “Green Approach”
688
Fabrication of antibacterial nanofiber substrate using polyethylene terephthalate and copper nitrate to determine the efficiency of submicron particle filtration
689
Fabrication of anticorrosive multilayer onto magnesium alloy substrates via spin-assisted layer-by-layer technique
690
Fabrication of antiferroelectric PLZT films on metal foils
691
Fabrication of antifouling membrane surface by poly(sulfobetaine methacrylate)/polydopamine co-deposition
692
Fabrication of antifouling polyethersulfone ultrafiltration membranes using Pluronic F127 as both surface modifier and pore-forming agent
693
Fabrication of anti-reflection structure on protective layer of solar cells by hot-embossing method
694
Fabrication of antireflective layers on silicon using metal-assisted chemical etching with in situ deposition of silver nanoparticle catalysts
695
Fabrication of aortic bioprosthesis by decellularization, fibrin glue coating and re‑endothelization: a cell scaffold approach
696
Fabrication of apatite-type lanthanum silicate films and anode supported solid oxide fuel cells using nano-sized printable paste
697
Fabrication of arched MEMS electric contactor with Cu-based carbon nanofibre composite film
698
Fabrication of artificial crystals with tunable lattice constant via self-assembly of floating magnetic particles
699
Fabrication of As-doped p-type ZnO thin films using As2O3 as doping source material by E-beam evaporation
700
Fabrication of a-SiGeC:H solar cells using monomethyl germane by suppressing carbon incorporation for narrowing optical bandgap
701
Fabrication of aspheric surface using ultraprecision cutting and BMG molding
702
Fabrication of asymmetric alumina membranes: I. Effect of SrO addition on thermal stabilization of transition aluminas
703
Fabrication of asymmetric chitosan GTR membranes for the treatment of periodontal disease
704
Fabrication of asymmetric chitosan GTR membranes for the treatment of periodontal disease
705
Fabrication of asymmetric tubular mixed-conducting dense membranes by a combined spin-spraying and co-sintering process
706
Fabrication of ATLAS pixel detector prototypes at IRST
707
Fabrication of ATLAS pixel detector prototypes at IRST
708
Fabrication of ATLAS pixel detector prototypes at IRST
709
Fabrication of Au nanodots with 60 nm diameter on ITO glass: Towards nanobiochip using nanoporous alumina mask
710
Fabrication of Au nanodots with 60 nm diameter on ITO glass: Towards nanobiochip using nanoporous alumina mask
711
Fabrication of Au nanowire array for anodic stripping voltammetry determination of trace Pb2+ ions
712
Fabrication of Au thin film gratings by pulsed laser interference
713
Fabrication of Au(1 1 1) facet enriched electrode on glassy carbon
714
Fabrication of Au/ZnO/MWCNTs electrode and its characterization for electrochemical cholesterol biosensor
715
Fabrication of Au@Ag core–shell NPs as enhanced CT contrast agents with broad antibacterial properties
716
Fabrication of Au–Cu2O core–shell nanocube heterostructures
717
Fabrication of Au–Pd nanoparticles/graphene oxide and their excellent catalytic performance
718
Fabrication of automotive heat exchanger using kinetic spraying process
719
Fabrication of Azobenzene-terminated Dendrimers and Application to Photoswitching Devices
720
Fabrication of B4C from Na2B4O7 + Mg + C by SHS method
721
Fabrication of BaCe0.8Y0.2O3 dense film on perovskite-type oxide electrode substrates
722
Fabrication of Bacillus cereus electrochemical immunosensor based on double-layer gold nanoparticles and chitosan
723
Fabrication of back-illuminated, fully depleted charge-coupled devices
724
Fabrication of back-illuminated, fully depleted charge-coupled devices
725
Fabrication of ballistic suspended graphene with local-gating
726
Fabrication of ball-shaped atomic force microscope tips by ion-beam-induced deposition of platinum on multiwall carbon nanotubes
727
Fabrication of ball-shaped atomic force microscope tips by ion-beam-induced deposition of platinum on multiwall carbon nanotubes
728
Fabrication of barium titanate ferroelectric layers by electrophoretic deposition technique
729
Fabrication of BaTiO3 dielectric films by direct ink-jet printing
730
Fabrication of BaTiO3 single crystals using secondary abnormal grain growth
731
Fabrication of BaTiO3-PTFE composite film for embedded capacitor employing aerosol deposition
732
Fabrication of Be/CuCrZr/SS mock-ups for ITER first wall
733
Fabrication of beam homogenizers in quartz by laser micromachining
734
Fabrication of belt-like VO2(M)@C core-shell structured composite to improve the electrochemical properties of VO2(M)
735
Fabrication of beryllide pebble as advanced neutron multiplier
736
Fabrication of Beryllium Capsules with Copper-Doped Layers for NIF Targets: A Progress Report
737
Fabrication of Bi3+-doped ZnO with enhanced photocatalytic performance
738
Fabrication of biconical tapered optical fibers using hydrofluoric acid
739
Fabrication of Bi-doped YIG optical thin film for electric current sensor by pulsed laser deposition
740
Fabrication of Bi-free TiO2 nano-crystallized glass
741
Fabrication of bilayered YSZ/SDC electrolyte film by electrophoretic deposition for reduced-temperature operating anode-supported SOFC
742
Fabrication of bimetallic Cu/Pt nanoparticles modified glassy carbon electrode and its catalytic activity toward hydrogen evolution reaction
743
Fabrication of bimetallic microfluidic surface-enhanced Raman scattering sensors on paper by screen printing Original Research Article
744
Fabrication of bimetallic nanoparticles/multi-walled carbon nanotubes composites for microelectronic circuits Original Research Article
745
Fabrication of bimetallic rods consist of a Zr-based bulk metallic glass and a crystalline copper by co-extrusion
746
Fabrication of bimodal mesoporous carbons from petroleum pitch by a one-step nanocasting method Original Research Article
747
Fabrication of bimodal porous alumina ceramics
748
Fabrication of bimodal size SiCp reinforced AZ31B magnesium matrix composites
749
Fabrication of bioactive composite by developing PLLA onto the framework of sintered HA scaffold
750
Fabrication of bioactive glass–ceramic foams mimicking human bone portions for regenerative medicine
751
Fabrication of bioactive titania coating on nitinol by plasma electrolytic oxidation
752
Fabrication of bioceramic scaffolds with ordered pore structure by inverse replication of assembled particles
753
Fabrication of biocompatible hydrogel coatings for implantable medical devices using Fenton-type reaction
754
Fabrication of biocompatible porous scaffolds based on hydroxyapatite/collagen/chitosan composite for restoration of defected maxillofacial mandible bone
755
Fabrication of biodegradable micelles with reduction-triggered release of 6-mercaptopurine profile based on disulfide-linked graft copolymer conjugate
756
Fabrication of biodegradable micelles with sheddable poly(ethylene glycol) shells as the carrier of 7-ethyl-10-hydroxy-camptothecin
757
Fabrication of biodegradable nano-sized β-TCP/Mg composite by a novel melt shearing technology
758
Fabrication of Biodegradable PCL Particles as well as PA66 Nanofibers via Air-Sealed Centrifuge Electrospinning (ASCES)
759
Fabrication of Biodegradable PCL Particles as well as PA66 Nanofibers via Air-Sealed Centrifuge Electrospinning (ASCES)
760
Fabrication of BiodegradablePoly (d,l-lactide-co-glycolide) Nanoparticles Containing Tamoxifen Citrate
761
Fabrication of biofunctional stents with endothelial progenitor cell specificity for vascular re-endothelialization
762
Fabrication of Biomedical Prototypes with Locally Controlled Properties Using FDM
763
Fabrication of Biomembrane from Banana Stem for Lead Removal
764
Fabrication of biomimetic apatite coating on porous titanium and their osteointegration in femurs of dogs
765
Fabrication of biomimetic device with PS-b-PNIPAAm copolymer pillars mimicking a gecko foot pad
766
Fabrication of biomimetic hydrophobic films with corrosion resistance on magnesium alloy by immersion process
767
Fabrication of biomolecule-PEG micropattern on titanium surface and its effects on platelet adhesion
768
Fabrication of biomorphic SiC composites using wood preforms with different structures
769
Fabrication of bio-nanocomposite films based on fish gelatin reinforced with chitosan nanoparticles
770
Fabrication of biopolymer nanoparticles by antisolvent precipitation and electrostatic deposition: Zein-alginate core/shell nanoparticles
771
Fabrication of biopolymer-based staple electrospun fibres for nanocomposite applications by particle-assisted low temperature ultrasonication
772
Fabrication of Biosensor for Determination of L-lactate using Elite Nanomaterials based LDH-cMWCNT-MB/Chitosan/SWCNT-Au Electrode
773
Fabrication of biotextured nanocrystalline nickel films for the reduction and control of friction
774
Fabrication of bipolar CuInO2 with delafossite structure Original Research Article
775
Fabrication of bismuth telluride nanoparticles using a chemical synthetic process and their thermoelectric evaluations
776
Fabrication of bismuth telluride nanotubes via a simple solvothermal process
777
Fabrication of bismuth titanate (Bi4Ti3O12) thin lms: Effect of annealing temperature on their structural and optical properties
778
Fabrication of Black Printing Toner through in situ Polymerization:
779
Fabrication of black-colored CuO–Al2O3–ZrO2 ceramics via heterogeneous nucleation method
780
Fabrication of blend biodegradable nanofibrous nonwoven mats via multi-jet electrospinning
781
Fabrication of blue top-emitting organic light-emitting devices with highly saturated color
782
Fabrication of BN nanosheets-coated SrAl2O4:Eu2+ as a new water-resistant phosphor by a one-pot method
783
Fabrication of Borassus fruit lignocellulose fiber/PP composites and comparison with jute, sisal and coir fibers
784
Fabrication of boron nitride planar field emitters
785
Fabrication of Bovine Serum Albumin Nanoparticles Self-assembled Coacervation Method for Drug Delivery Systems
786
Fabrication of Bovine Serum Albumin-Loaded Coaxial Electrospun Thread with an Aligned Core-Shell Fibrous Structure
787
Fabrication of broad area optical nanostructures for high throughput chemical sensing
788
Fabrication of bronze components by metal injection moulding using powders with different particle characteristics
789
Fabrication of bulk Al-La-Ni alloy by spark plasma sintering
790
Fabrication of bulk AlN–TiN nanocomposite by reactive ball milling and underwater shock consolidation technique
791
Fabrication of bulk amorphous Fe67Co9.5Nd3Dy0.5B20 alloy by hot extrusion of ribbon and study of the magnetic properties
792
Fabrication of bulk anatase TiO2 by the spark plasma sintering method
793
Fabrication of bulk macroporous zirconia by combining sol–gel with calcination processes
794
Fabrication of bulk metallic glasses at the region of multiple quasi-peritectic reactions
795
Fabrication of bulk metallic glasses in the alloy system Fe–C–Si–B–P–Cr–Mo–Al using hot metal and industrial ferro-alloys
796
Fabrication of bulk nanocrystalline Al electrodeposited from a dimethylsulfone bath
797
Fabrication of bulk nanocrystalline alumina–zirconia materials
798
Fabrication of bulk nanostructured silver material from nanopowders using shockwave consolidation technique
799
Fabrication of bulk UFG magnesium alloys by cyclic extrusion compression
800
Fabrication of bulk ultrafine grained titanium alloy via equal channel angular pressing based thermomechanical treatment
801
Fabrication of bulk-modified carbon paste electrode containing α-PW12O403− polyanion supported on modified silica gel: Preparation, electrochemistry and electrocatalysis
802
Fabrication of buried contact silicon solar cells using porous silicon
803
Fabrication of C nanostructures by selective growth on 60 GaSerMoS and InSerMoS heterostructure substrates
804
Fabrication of C/SiC composites by combining liquid infiltration process and spark plasma sintering technique
805
Fabrication of cadmium titanate nanofibers via electrospinning technique
806
Fabrication of CaGa2O4 nanofibers by electrospinning and CaGa2O4-assisted photodegradation of crystal violet in aqueous dispersions under visible light illumination Original Research Article
807
Fabrication of Calcium Carbonate with Exquisite Morphologies and Colors through a New Controlled Precipitation Approach
808
Fabrication of calcium fluoride capillary electrophoresis microdevices for on-chip infrared detection
809
Fabrication of calcium phosphate/chitosan coatings on AZ91D magnesium alloy with a novel method
810
Fabrication of Calcium Sulfate Coated Selenium Nanoparticles and Corresponding In-Vitro Cytotoxicity Effects Against 4T1 Breast Cancer Cell Line
811
Fabrication of CaO insulator coatings by MOCVD for application in vanadium/lithium blankets
812
Fabrication of capacitive ultrasonic transducers by a low temperature and fully surface-micromachined process
813
Fabrication of capsules with angle-dependent gold shims for hohlraum drive symmetry correction
814
Fabrication of capsules with angle-dependent gold shims for hohlraum drive symmetry correction
815
Fabrication of carbon black/crosslinked poly(vinyl pyrrolidone) core-shell nanoparticles stable in water
816
Fabrication of carbon black–polymer composite sensors using a position-selective and thickness-controlled electrospray method
817
Fabrication of carbon coated ceramic membranes by pyrolysis of methane using a modified chemical vapor deposition apparatus
818
Fabrication of carbon fiber reinforced ceramic matrix composites with improved oxidation resistance using boron as active filler
819
FABRICATION OF CARBON FIBERS FROM COMMERCIAL WET SPIN POLYACRYLONITRILE FIBERS
820
Fabrication of carbon fibers from jute fibers by pre-oxidation and carbonization
821
Fabrication of carbon fibers from jute fibers by pre-oxidation and carbonization
822
Fabrication of carbon membranes for gas separation––a review Review Article
823
Fabrication of carbon microcapsules containing silicon nanoparticles–carbon nanotubes nanocomposite by sol–gel method for anode in lithium ion battery
824
Fabrication of carbon nanofiber(CNF)-dispersed Al2O3 composites by pulsed electric-current pressure sintering and their mechanical and electrical properties
825
Fabrication of carbon nanofibres and bamboo-shaped carbon nanotubes with open ends from anthracite coal by arc discharge
826
Fabrication of carbon nanoflowers by plasma-enhanced chemical vapor deposition
827
Fabrication of carbon nano-sized fiber reinforced copper composite using liquid infiltration process
828
Fabrication of carbon nanotube AFM probes using the Langmuir–Blodgett technique
829
Fabrication of carbon nanotube AFM probes using the Langmuir–Blodgett technique
830
Fabrication of carbon nanotube assemblies on Ni–Mo substrates mimics law of natural forest growth
831
Fabrication of carbon nanotube based transparent conductive thin films using layer-by-layer technology
832
Fabrication of carbon nanotube field effect transistors by AC dielectrophoresis method Original Research Article
833
Fabrication of carbon nanotube field emission film by electrophoresis deposition and sintering
834
Fabrication of Carbon Nanotube Field-Effect Transistors by Fluidic Alignment Technique
835
Fabrication of carbon nanotube paste using photosensitive polymer for field emission display
836
Fabrication of carbon nanotube reinforced alumina matrix nanocomposite by sol–gel process
837
Fabrication of carbon nanotube reinforced alumina matrix nanocomposite by sol–gel process
838
Fabrication of carbon nanotube sheets and their bilirubin adsorption capacity
839
Fabrication of carbon nanotube thin films on flexible substrates by spray deposition and transfer printing Original Research Article
840
Fabrication of carbon nanotube/silicon nanowire array heterojunctions and their silicon nanowire length dependent photoresponses
841
Fabrication of carbon nanotube-nickel nanoparticle hybrid paste electrodes for electrochemical sensing of carbohydrates
842
Fabrication of carbon nanotubes from conducting polymer precursor as field emitter
843
FABRICATION OF CARBON NANOTUBES ON INTER-DIGITATED METAL ELECTRODE FOR SWITCHABLE NANOPHOTONIC DEVICES
844
Fabrication of carbon nanotubes/carbon fiber hybrid fiber in industrial scale by sizing process
845
Fabrication of carbon nanotubes/copper phthalocyanine composites with improved compatibility
846
Fabrication of carbon nanotubes/hydroxyapatite nanocomposites via an in situ process
847
Fabrication of carbon nanotubes/poly(1,2-diaminobenzene) nanoporous composite via multipulse chronoamperometric electropolymerization process and its electrocatalytic property toward oxidation of NADH
848
Fabrication of carbon nanowires by detonation-assisted chemical vapor deposition
849
Fabrication of carbon paste electrode containing a new inorganic–organic hybrid based on [SiW12O40]4− polyoxoanion and Nile blue and its electrocatalytic activity toward nitrite reduction
850
Fabrication of carbon quantum dots and their application for efficient detecting Ru(bpy)32+ in the solution
851
Fabrication of carbon spheres on a-C:H films by heat-treatment of a polymer precursor
852
Fabrication of carbon/carbon composites by an electrified preform heating CVI method Original Research Article
853
FABRICATION OF CARBON–POLYMER COMPOSITE BIPOLAR PLATES FOR POLYMER ELECTROLYTE MEMBRANE FUEL CELLS BY COMPRESSION MOULDING
854
Fabrication of carboxyl functionalized CdSe quantum dots via ligands self-assembly and CdSe/epoxy fluorescence nanocomposites
855
Fabrication of CaSiO3 bioceramics with open and unidirectional macro-channels using an ice/fiber-templated method
856
Fabrication of Cassava Starch/Mentha piperita Essential Oil Biodegradable Film with Enhanced Antibacterial Properties
857
Fabrication of cast metal guidance flange prosthesis for a patient with segmental mandibulectomy: A clinical report
858
Fabrication of catalyst by atomic layer deposition for high specific power density proton exchange membrane fuel cells
859
Fabrication of catalytically active AgAu bimetallic nanoparticles by physical mixture of small Au clusters with Ag ions Original Research Article
860
Fabrication of catalytically active Au/Pt/Pd trimetallic nanoparticles by rapid injection of NaBH4
861
Fabrication of cathode supported solid oxide fuel cell by multi-layer tape casting and co-firing method
862
Fabrication of cationic cellulosic nanofibrils through aqueous quaternization pretreatment and their use in colloid aggregation
863
Fabrication of Cationic Exchange Polystyrene Nanofibers for Drug Delivery
864
Fabrication of cationic nanomicelle from chitosan-graft-polycaprolactone as the carrier of 7-ethyl-10-hydroxy-camptothecin
865
Fabrication of c-axis oriented zinc oxide by electrophoretic deposition in a rotating magnetic field
866
Fabrication of c-axis-oriented apatite-type polycrystalline La10Si6O27 ceramic and its anisotropic oxide ionic conductivity
867
Fabrication of Cd1−xZnxS films with controllable zinc doping using a vapor zinc chloride treatment
868
Fabrication of CdS and CuWO4 modified TiO2 nanoparticles and its photocatalytic activity under visible light irradiation
869
Fabrication of CdS nanocrystals embedded in copolymer matrix by an in situ simultaneous copolymerization-sulfidation technique
870
Fabrication of CdS nanocrystals with various morphologies in selective solvents via a convenient ultraviolet irradiation technique
871
Fabrication of CdS nanowires decorated with TiO2 nanoparticles for photocatalytic hydrogen production under visible light irradiation
872
Fabrication of CdS photoelectrodes coated with titania nanosheets for water splitting with visible light
873
Fabrication of CdS quantum dot sensitized solar cells via a pressing route
874
Fabrication of CdS/polyacrylonitrile nanocomposites by γ-irradiation in an ethanol solution
875
Fabrication of CdS/TiO2 nano-bulk composite photocatalysts for hydrogen production from aqueous H2S solution under visible light
876
Fabrication of CdTe solar cell using an Inx(OOH,S)y/CdS double layer as a heterojunction counterpart
877
Fabrication of CdTe strip detectors for imaging applications
878
Fabrication of CdTe strip detectors for imaging applications
879
Fabrication of Ce:YAG, Ce,Cr:YAG and Ce:YAG/Ce,Cr:YAG dual-layered composite phosphor ceramics for the application of white LEDs
880
Fabrication of cell microintegrated blood vessel constructs through electrohydrodynamic atomization
881
Fabrication of cell outer membrane mimetic polymer brush on polysulfone surface via RAFT technique
882
Fabrication of cell patches using biodegradable scaffolds with a hexagonal array of interconnected pores (SHAIPs)
883
Fabrication of cell pattern on poly(dimethylsiloxane) by vacuum ultraviolet lithography
884
Fabrication of cell penetration enhanced poly (l-lactic acid-co-ɛ-caprolactone)/silk vascular scaffolds utilizing air-impedance electrospinning
885
Fabrication of Cell-Laden AME-Loaded Collagen-Based Hydrogel Promotes Fibroblast Proliferation and Wound Healing In Vitro
886
Fabrication of cellular and microcellular ceramics with controllable open-cell content from polysiloxane-LDPE blends: I. Compounding and Foaming
887
Fabrication of cellular polycaprolactone films for cell culture
888
Fabrication of cellular shape memory alloy materials by reactive eutectic brazing using niobium
889
Fabrication of cellulase protein fibers through concentric electrospinning
890
Fabrication of Cellulose Acetate Film From Oil Palm Empty Fruit Bunch (OP-EFB) and Cytotoxicity Evaluation
891
Fabrication of Cellulose Acetate/Iron Oxide Electrospun Nanocomposite as a New Sorbent for Removal of Arsenic from Aqueous Solution
892
Fabrication of cellulose acetate/sodium dodecyl sulfate nanofiltration membrane: Characterization and performance in rejection of pesticides Original Research Article
893
Fabrication of CeO2 thin film on quartz glass and MgO(100) by electron beam evaporation
894
Fabrication of ceramic coatings from polysilazane/aluminum: Effect of aluminum content on chemical composition, microstructure, and mechanical properties
895
Fabrication of ceramic composite coatings using electrophoretic deposition, reaction bonding and low temperature sintering
896
Fabrication of ceramic films for solid oxide fuel cells via slurry spin coating technique
897
FABRICATION OF CERAMIC MEMBRANE CHROMATOGRAPHY FOR BIOLOGICS PURIFICATION
898
Fabrication of ceramic membranes with controllable surface roughness and their applications in oil/water separation
899
Fabrication of ceramic micro-scale hollow components by micro-powder injection moulding
900
Fabrication of ceria particles using glycine nitrate spray pyrolysis
901
Fabrication of cerium active terbium aluminum garnet (TAG:Ce) phosphor powder via the solid-state reaction method
902
Fabrication of CeZrO2 on Ni/SiO2 and promoted catalysis for methane autothermal reforming in a fluidized bed reactor
903
Fabrication of chain-like Mn2O3 nanostructures via thermal decomposition of manganese phthalate coordination polymers
904
Fabrication of charged particles for electrophoretic display
905
Fabrication of charged particles for electrophoretic display
906
Fabrication of chemical patterns from graphoepitaxially assembled block copolymer films by molecular transfer printing
907
Fabrication of chemical templates via selective laser-induced desorption of hexadecanethiol self-assembled monolayers
908
Fabrication of chitin/poly(3-hydroxybutyrate-co-3-hydroxyvalerate) hydrogel scaffold
909
Fabrication of Chitosan Silk-based Tracheal Scaffold Using Freeze-Casting Method
910
Fabrication of chitosan/silver nanocomposites based on electrochemical methods for removing formaldehyde in air
911
Fabrication of chitosan-based electrospun nanofiber scaffold: Amplification of biomechanical properties, structural stability, and seeded cell viability
912
Fabrication of chitosan–CdSe/CdS/ZnS multilayer films by electrostatic self-assembly method
913
Fabrication of chitosan-hyaluronic acid nanoparticles and encapsulation into nanoparticles of dinitrosyl iron complexes as potential cardiological drugs
914
Fabrication of Chitosan-Polyethylene Oxide Electrospun Nanofibrous Mats Containing Green Tea Extract
915
Fabrication of chitosan-silver nanoparticle hybrid 3D porous structure as a SERS substrate for biomedical applications
916
Fabrication of chromium oxide nanoparticles by laser-induced deposition from solution
917
Fabrication of CIGS nanoparticle-ink using ball milling technology for applied in CIGS thin films solar cell
918
Fabrication of CK45/RGO Nanocomposite Using Machining Chips Recycling and Spark Plasma Sintering
919
Fabrication of clinical gas sensor using MEMS process
920
Fabrication of CNT-SiC/SiC composites by electrophoretic deposition
921
Fabrication of CO2 sensor using NASICON thick film
922
Fabrication of coated - collagen electro-spun PHBV nanofiber film by chemical method and its cellular study
923
Fabrication of coated graphite electrode for the selective determination of europium (III) ions
924
Fabrication of cobalt nano-particles by pulsed wire evaporation method in nitrogen atmosphere
925
Fabrication of cold sprayed Al-intermetallic compounds coatings by post annealing
926
Fabrication of collagen-coated biodegradable polymer nanofiber mesh and its potential for endothelial cells growth
927
Fabrication of colloidal arrays by self-assembly of sub-100 nm silica particles
928
Fabrication of colloidal crystal heterostructures by a room temperature floating self-assembly method
929
Fabrication of colloidal crystals on hydrophilic/hydrophobic surface by spin-coating
930
Fabrication of column chip made of PMMA for μFIA
931
Fabrication of combinatorial nm-planar electrode array for high throughput evaluation of organic semiconductors
932
Fabrication of compact turning mirrors in silicon-on-insulator materials
933
Fabrication of Complex Crystals Using Kinetic Control, Chemical Additives, and Epitaxial Growth
934
Fabrication of complex microcapsules containing poly(allylamine)-g-poly(N-isopropylacrylamide) and their thermal responsivity
935
Fabrication of complex of Fe3O4 nanorods by magnetic-field-assisted solvothermal process
936
Fabrication of complex shape electrodes by localized electrochemical deposition
937
Fabrication of complex-shaped alumina/nickel nanocomposites by gelcasting process
938
Fabrication of complex-shaped Y-TZP/Al2O3 nanocomposites
939
Fabrication of composite alloy cladding material by brazing process
940
Fabrication of composite coating comprising bioactive calcium and sodium titanates on titanium using calcium hydroxide slurry containing sodium ions
941
Fabrication of composite coating particles with mullite stoichiometric ratio by a novel processing
942
Fabrication of composite coatings using a combination of electrochemical methods and reaction bonding process
943
Fabrication of composite film comprising TiO2/CdS and polyelectrolytes based on ionic attraction
944
Fabrication of composite microparticles of artemisinin for dissolution enhancement
945
Fabrication of composite particles by attaching surface-modified nanoparticles to core particles by wet processing in organic solvents
946
Fabrication of composite pipes by multi-billet extrusion technique
947
Fabrication of composite SOFC anodes
948
Fabrication of composite structure of carbon fibers and high density SiC nanowires
949
Fabrication of compositionally and structurally graded Ti–TiO2 structures using laser engineered net shaping (LENS)
950
Fabrication of conducting polymer patterns for gas sensing by a dry technique
951
Fabrication of conducting polypyrrole film with microlens arrays by combination of breath figures and replica molding methods
952
Fabrication of conductive metallized nanostructures from self-assembled amphiphilic triblock copolymer templates: Nanospheres, nanowires, nanorings
953
Fabrication of conductive NGF-conjugated polypyrrole–poly(l-lactic acid) fibers and their effect on neurite outgrowth
954
Fabrication of conductive polymer-coated sulfur composite cathode materials based on layer-by-layer assembly for rechargeable lithium–sulfur batteries
955
Fabrication of conductive porous alumina (CPA) structurally modified with carbon nanotubes (CNT)
956
Fabrication of conductive SrRuO3 thin film and Ba0.60Sr0.40TiO3/ SrRuO3 bilayer films on MgO substrate
957
Fabrication of conductive woven fabric and analysis of electromagnetic shielding via measurement and empirical equation
958
Fabrication of conjugated polymers nanostructures via direct near-field optical lithography
959
Fabrication of conjugated polymers nanostructures via direct near-field optical lithography
960
Fabrication of conjugated polymers nanostructures via direct near-field optical lithography
961
Fabrication of contact electrodes in Si for nanoelectronic devices using ion implantation
962
Fabrication of contact holes by rear side laser ablation of polyimide foils for CIGS solar modules
963
Fabrication of continuously porous SiC–Si3N4 composite using SiC powder by extrusion process
964
Fabrication of CoO nanorods via thermal decomposition of CoC2O4 precursor
965
Fabrication of COOH-terminated self-assembled monolayers for DNA sensors
966
Fabrication of Copper and Iron Nano/Micro Structures on Semiconducting Substrate and Their Electrical Characterization
967
Fabrication of copper microcylinders in polycarbonate membranes and their characterization
968
Fabrication of copper micro-tubes by electroless deposition with an etched porous aluminum template without using sensitization and activation
969
Fabrication of copper nanoparticles/graphene oxide composites for surface-enhanced Raman scattering
970
Fabrication of Copper Open Cell Foam by Electrochemical Deposition Method and Investigation on the Effect of Current Intensity and Plating Solution on the Created Microstructure
971
Fabrication of copper oxide nanofluid using submerged arc nanoparticle synthesis system (SANSS)
972
Fabrication of copper oxide thin films by the drop chemical deposition technique
973
Fabrication of copper sulfide microstructures with the bottle- and thorny rod-shape
974
Fabrication of copper/modal fabric composites through electroless plating process for electromagnetic interference shielding
975
Fabrication of copper-ceria hybrid composite electrode for electrocatalytic oxidation of methanol
976
Fabrication of copper–indium–gallium–diselenide absorber layer by quaternary-alloy nanoparticles for solar cell applications
977
Fabrication of CoPt nanoparticles with high coercivity on a polymer film
978
Fabrication of coral-like superhydrophobic coating on filter paper for water–oil separation
979
Fabrication of cordierite filter by in-situ solidification for high temperature dust collection
980
Fabrication of cordierite glass ceramics by slip casting of glass powders
981
Fabrication of cordierite glass ceramics by slip casting of glass powders
982
Fabrication of cordierite powder from magnesium–aluminum hydroxide and sodium silicate: its characteristics and sintering
983
Fabrication of cordierite–mullite ceramic composites with differently shaped mullite grains
984
Fabrication of core or shell reversibly photo cross-linked micelles and nanogels from double responsive water-soluble block copolymers
985
Fabrication of core–shell latex spheres with CdS/polyelectrolyte composite multilayers
986
Fabrication of core–shell MIL-101(Cr)@UiO-66(Zr) nanocrystals for hydrogen storage
987
Fabrication of core–shell particles for a fluidized bed electrode in seawater desalination
988
Fabrication of core–shell structured MWCNT–Ti(TiC) using a one-pot reaction from a mixture of TiCl3, TiH2, and MWCNTs Original Research Article
989
Fabrication of core-shell structured nanoparticle layer substrate for excitation of localized surface plasmon resonance and its optical response for DNA in aqueous conditions Original Research Article
990
Fabrication of corrosion resistant superhydrophobic surface with self-cleaning property on magnesium alloy and its mechanical stability
991
Fabrication of corrosion resistant, bioactive and antibacterial silver substituted hydroxyapatite/titania composite coating on Cp Ti
992
Fabrication of cosputtered Zn–In–Sn–O films and their applications to organic light-emitting diodes
993
Fabrication of cotton fabric with superhydrophobicity and flame retardancy
994
Fabrication of covalently attached conducting multilayer self-assembly film of polyaniline by in situ coupling reaction
995
Fabrication of CoZn alloy nanowire arrays: Significant improvement in magnetic properties by annealing process
996
Fabrication of Cr2O3/Al2O3 composite nanofibers by electrospinning
997
Fabrication of Cr4+,Nd3+:YAG transparent ceramics for self-Q-switched laser
998
Fabrication of CrAlN nanocomposite films with high hardness and excellent anti-wear performance for gear application
999
Fabrication of Cs2.5H0.5PW12O40 three-dimensional ordered film by colloidal crystal template
1000
Fabrication of Cs2.5H0.5PW12O40 three-dimensional ordered film by colloidal crystal template