ليست عنوان مقالات لاتين Application of Peleg model to study mass transfer during osmotic dehydration of sardine sheets Original Research Article Application of signed digraphs-based analysis for fault diagnosis of chemical process flowsheets

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Application of Peleg model to study mass transfer during osmotic dehydration of sardine sheets Original Research Article

2

Application of Peleg model to study water absorption in chickpea during soaking Original Research Article

3

Application of penalty methods to generalized variational inequalities in Banach spaces

4

Application of PENELOPE code to the efficiency calibration of coaxial germanium detectors

5

Application of Peng–Rabinson equation of state for CO2 freezing prediction of hydrocarbon mixtures at cryogenic conditions of gas plants Original Research Article

6

Application of Pentaglycidyl ether Penta-ethoxy Phosphorus Composites Polymers Formulated by Two Additives, Trisodium Phosphate (TSP) and Natural Phosphate(NP) and their Combination in the Behavior of the Coating on E24 Carbon Steel in NaCl 3.5%

7

Application of PEO based gel network polymer electrolytes in dye-sensitized photoelectrochemical cells

8

Application of PEO113–b-PS218 nano-aggregates for improved protective characteristics of composite zinc coatings in chloride-containing environment

9

Application of peptide nucleic acid towards development of nanobiosensor arrays

10

Application of perceptron neural networks to tool-state classification in a metal-turning operation

11

Application of perceptual difference model on regularization techniques of parallel MR imaging

12

Application of percolation model to particulate matter formation in pressurized coal combustion

13

Application of percolation theory results to AC-coupled pixel detectors with integrated polarizing resistive network

14

Application of percolation theory results to AC-coupled pixel detectors with integrated polarizing resistive network

15

Application of percolation theory to surface segregation during recovery Original Research Article

16

Application of Perfect Difference Codes in Wireless Infrared Systems

17

Application of perfect mixing model for simulation of vertical roller mills

18

Application of perfluorinated acids as ion-pairing reagents for reversed-phase chromatography and retention-hydrophobicity relationships studies of selected β-blockers

19

Application of perforated sheets to improve the efficiency of reactive profiled noise barriers

20

Application of periodic boundary conditions on multiple part finite element meshes for the meso-scale homogenization of textile fabric composites

21

Application of periodic operation to kinetic study for NO–CO reaction over Pt/Al2O3 Original Research Article

22

Application of permanent-magnet reluctance to minimise torque pulsation in single-phase synchronous motors

23

Application of permeation liquid membrane and scanned stripping chronopotentiometry to metal speciation analysis of colloidal complexes Original Research Article

24

Application of personal non-lead nano-composite shields for radiation protection in diagnostic radiology: a systematic review and meta-analysis

25

Application of perturbation analysis to sensitivity computations of generating units and system reliability

26

Application of perturbation theory to a hard-chain reference fluid: an equation of state for square-well chains

27

Application of perturbation theory to chain and polar fluids: Pure alkanes, alkanols and water

28

Application of perturbed chain equation-of-state to solid–liquid equilibria: I. Pure component

29

Application of perturbed chain equation-of-state to solid–liquid equilibria: II. Binary mixtures

30

Application of pervaporation for removal of water produced during enzymatic esterification in ionic liquids Original Research Article

31

Application of pesticide leaching models to the Vredepeel dataset: II Pesticide fate

32

Application of pesticide simulation models to the Vredepeel dataset: I. Water, solute and heat transport

33

Application of pesticide transport model for simulating diazinon runoff in California’s central valley

34

Application of pesticides suppress foliar proanthocyanidin content in Leucaena species

35

Application of pesticides to crops : Graham A. Matthews, Imperial College Press, UK, 2000, 325 pp., ISBN 1-86094-168-0

36

Application of Petri nets to reliability prediction of occupant safety systems with partial detection and repair

37

Application of Petri nets to reliability prediction of occupant safety systems with partial detection and repair

38

Application of Petri nets to solve distribution system contingency by considering customer load patterns

39

Application of petrographic examination techniques to the assessment of fire-damaged concrete and masonry structures

40

Application of petrographic image analysis for the assessment of chemical attack in the concrete segments of a tunnel

41

Application of petrographic image analysis to the characterization of fluid-flow pathways in a highly-cemented reservoir: Kane Field, Pennsylvania, U.S.A.

42

Application of petrography for determining the quality of concrete cured in tropical environment

43

Application of petroleum hydrocarbon chemical fingerprinting and allocation techniques after the Exxon Valdez oil spill

44

Application of Petrov-Galerkin finite element method to shallow water waves model: Modified Korteweg-de Vries equation

45

Application of PGNAA for bulk coal samples in a 4π geometry

46

Application of PGPR Enhances Development and Nodulation of Vigna Radiata L. Grown under Salt Stress

47

Application of pH Indicator Label Based on Beetroot Color for Determination of Milk Freshness

48

Application of PHADEC method for the decontamination of radioactive steam piping components of Caorso plant

49

Application of Phase Change Material (PCM) for Cooling Load Reduction in Lightweight and Heavyweight Buildings: Case Study of a High Cooling Load Region of Iran

50

Application of phase change materials in refrigerator and freezer appliances: A comprehensive review

51

Application of phase change materials in thermal management of electronics

52

Application of phase change materials to pre-heating of evaporator and pressure regulator of a gaseous sequential injection system

53

Application of phase consistency to improve time efficiency and image quality in dual echo black-blood carotid angiography

54

Application of phase contrast imaging atomic force microscopy to tribofilms on DLC coatings

55

Application of Phase- Contrast Microscope for Detection of Prototheca spp. Microalgae in Tissue Section-First record (Note)

56

Application of Phase Detection Frequency Domain Reflectometry for Locating Faults in an F-18 Flight Control Harness

57

Application of Phase Transfer Catalyst for Synthesizing of 5, 5-diphenylimidazolidine-2,4-dione as a Famous Anticonvulsant Drug

58

Application of phase-field modeling to deformation of metallic glasses

59

Application of phase-field modeling to industrial materials and manufacturing processes

60

Application of phase-field modeling to irradiation effects in materials

61

Application of Phase-to-Amplitude Conversion Technique to Linear Birefringence Measurements

62

Application of phase-transfer catalytic membrane reactor in liquid–liquid nucleophilic substitution reaction: Effects of operating parameters

63

Application of PHAST software in methane emission factor for startup process of gas compressors (Case study: Iran gas transmission operation district 2)

64

Application of PHEL ‑ ‘Public Health Epidemiological Logic’ of Public Health Intervention and Public Health Impact

65

Application of phenolic oxidation chemistry in synthesis: preparation of the BCE ring system of ryanodine

66

Application of pH-ORP titration to dynamically control the chlorination and dechlorination for wastewater reclamation Original Research Article

67

Application of phosphate solubilising microorganisms to increase the solubilisation of rock phosphates in soil

68

Application of phosphogypsum in soil stabilization

69

Application of phosphonic acid self-assembled monolayer in organic field-effect transistors

70

Application of phosphoric acid and phytic acid-doped bacterial cellulose as novel proton-conducting membranes to PEMFC

71

Application of phosphorus diffusion gettering process on upgraded metallurgical grade Si wafers and solar cells

72

Application of phosphotungstic acid–nickel composite-modified carbon paste electrode for electrocatalytic oxidation of methanol in alkaline solution

73

Application of photoacoustic spectrometry to flow-injection analysis

74

Application of photoactivated periodate to the decolorization of reactive dye: reaction parameters and mechanism

75

Application of Photobacterium phosphoreum to toxicity assessment of phenylthio-carboxylates

76

Application of photocatalysis as a post treatment method of a heterotrophic–autotrophic denitrification reactor effluent Original Research Article

77

Application of photocatalytic oxidation treatment to pretreated and raw effluents from the Kraft bleaching process and textile industry

78

APPLICATION OF PHOTOCATALYTIC PROCESS FOR REMOVAL OF METHYL TERT-BUTYL ETHER FROM HIGHLY CONTAMINATED WATER

79

Application of Photocatalytic Process Using UV/TiO2 for Degradation of Cefepime: A Comparison between Photocatalytic and Photolytic

80

Application of photochemical indicators to evaluate ozone nonlinear chemistry and pollution control countermeasure in China

81

Application of photochemical reactions of Se in natural waters by hydride generation atomic fluorescence spectrometry Original Research Article

82

Application of photochemical reactor models to UV irradiation of trichloroethylene in water

83

Application of photochemical ultrafine aerosol particles generators for SMPS and DB size resolution testing

84

Application of photochromic dye to the measurement of particle movement in a fluidized bed

85

Application of photo-detection to art and archaeology at the C2RMF

86

Application of photo-detection to art and archaeology at the C2RMF

87

Application of photoelastic coating technique in tests of solid wooden beams reinforced with CFRP strips

88

Application of photoelectrochemical–electrodialysis treatment for the recovery and reuse of water from tannery effluents

89

Application of photoelectron emission microscopy (PEEM) to extraterrestrial materials

90

Application of Photo-Fenton Process For the removal of Nitrate from Aqueous Solutions

91

Application of Photo-Fenton System (UV/ H2O2/ Fe2+) for Efficient Decolorization of Azo-Dye Acid Yellow 17 in Aqueous Solution

92

Application of photogrammetry to the field observation of failed slopes

93

Application of photo-impinging streams reactor in degradation of phenol in aqueous phase Original Research Article

94

Application of photon recollision probability in coniferous canopy reflectance simulations

95

Application of photon scanning tunneling microscope to measure optical near field for atom manipulation

96

Application of photon scanning tunneling microscope to measure optical near field for atom manipulation

97

Application of photonic crystals to study molecular systems

98

Application of photopigment biomarkers for quantifying microalgal community composition and in situ growth rates

99

Application of photoreflectance to advanced multilayer structures for photovoltaics

100

Application of photoremovable protecting group for controlled release of plant growth regulators by sunlight

101

APPLICATION OF PHOTO-VISCOPLASTICITY TO GEOTECHNICAL ENGINEERING

102

Application of photovoltaic array for pumping water as an alternative to diesel engines in Jordan Badia, Tall Hassan station: Case study

103

Application of photovoltaic systems for increasing villagers’ income

104

Application of PHSC equation of state in prediction of gas hydrate formation condition

105

Application of pH-sensitive fusogenic polymer-modified liposomes for development of mucosal vaccines

106

Application of pH-sensitive fusogenic polymer-modified liposomes for development of mucosal vaccines

107

Application of physical failure models to enable usage and load based maintenance

108

Application of physical failure models to enable usage and load based maintenance

109

Application of physical modelling of debris flow triggering to field conditions: Limitations posed by boundary conditions

110

APPLICATION OF PHYSICAL MODELS OF THE SCALAR PROPERTIES OF METALS TO THE FORMULATION AND SOLUTION OF BOUNDARY-VALUE PROBLEMS OF THE THEORY OF PLASTICITY

111

APPLICATION OF PHYSICAL MODELS OF THE SCALAR PROPERTIES OF METALS TO THE FORMULATION AND SOLUTION OF BOUNDARY-VALUE PROBLEMS OF THE THEORY OF PLASTICITY

112

Application of physical separation methods for the upgrading of titanium dioxide contained in a fine waste

113

APPLICATION OF PHYSICAL SPLINE FINITE ELEMENT METHOD (PSFEM) TO FULLWAVE ANALYSIS OF WAVEGUIDES

114

Application of physical–chemical analytical techniques in the study of ancient ceramics

115

Application of physical–chemical analytical techniques in the study of ancient ceramics Original Research Article

116

Application of physico-chemical amendments for the counteraction of mercury pollution

117

Application of Physiologically Based Pharmacokinetic Modelling to Combination Toxicology

118

Application of Phytoremediation to Reduce Environmental Pollution of Copper Smelting and Refinery Factories: a Review

119

Application of phytotoxicity data to a new Australian soil quality guideline framework for biosolids Original Research Article

120

Application of pH-zone-refining countercurrent chromatography for the separation of indole alkaloids from Aspidosperma rigidum Rusby

121

Application of PID controller based on adaptive artificial neural network for ship control system

122

Application of piece-wise linear weight functions for 2D 8-node quadrilateral element in contact problems

123

Application of piezoceramic transducers for 3D Impedance modelling in damage assessment of plate

124

Application of Piezoelectric and Functionally Graded Materials in Designing Electrostatically Actuated Micro Switches

125

Application of piezoelectric PVDF film to the measurement of impulsive forces generated by cavitation bubble collapse near a solid boundary

126

Application of piezoelectric PVDF film to the measurement of impulsive forces generated by cavitation bubble collapse near a solid boundary Pages 403-414

127

Application of piezoelectric Ru(III)/cryptand-coated quartz crystal gas chromatographic detector for olefins Original Research Article

128

Application of piezoelectric tuning forks in liquid viscosity and density measurements

129

Application of pilot-scale membrane contactor hybrid system for removal of carbon dioxide from flue gas

130

Application of PIN photodiodes on the detection of X-rays generated in an electron accelerator

131

Application of PIN photodiodes on the detection of X-rays generated in an electron accelerator

132

Application of pipette-tip solid-phase extraction technique for fast determination of levofloxacin from wastewater sample using cobalt metal-organic framework

133

Application of Pitch Range Evaluation Subsequent to Arytenoid Adduction and Thyroplasty

134

application of pixel-based and object-based approaches for lulc mapping in jiroft region, s.e. iran

135

Application of Plackett Burman Design for Citric Acid Production from Pretreated and Untreated Wheat Straw

136

Application of Plackett–Burman experimental design to optimize biohydrogen fermentation by E. coli (XL1-BLUE)

137

Application of Plackett–Burman screening design for preparing glibenclamide nanoparticles for dissolution enhancement

138

Application of plain fretting test to extract fatigue properties of materials

139

Application of planar shape comparison to object retrieval in image databases

140

Application of planetary analog mechanical properties to subsurface geological investigations

141

Application of Planned Behavior Theory to Predict Drug Abuse Related Behaviors

142

Application of Planned Behaviour Theory to Predict Salt Consumption in the Rural Women of Chabahar

143

Application of planning models in the agri-food supply chain: A review

144

Application of Planning Standards in Regulating Road Reserves (Case Study: Kisii Town in Kenya)

145

Application of plant based extracts for the control the green pit scale insect (Asterolicanium phoenicis Rao.) with yield enhancement on date palm

146

APPLICATION OF PLANT BIOTECHNOLOGY TECHNIQUES IN ANTIOXIDANT PRODUCTION

147

Application of plant derived compounds to control fungal spoilage and mycotoxin production in foods

148

Application of plant growth regulators, a simple technique for improving the establishment success of plant cuttings in coastal dune restoration

149

Application of plant growth-promoting bacteria associated with composts and macrofauna for growth promotion of Pearl millet (Pennisetum glaucum L.)

150

Application of plant growth-promoting rhizobacteria to protect bell pepper against Tobacco mosaic virus

151

Application of Plants Extracts as Green Corrosion Inhibitors for Steel in Concrete - A review

152

Application of plasma deposited organosilicon thin films for the corrosion protection of metals

153

Application of Plasma Exchange in Patients with History of Unexplained Recurrent Abortion: A Case Series

154

Application of Plasma Immersion Ion Implantation for improved performance of tools and industrial components

155

Application of plasma modified multi-wall carbon nanotubes to ethanol vapor detection

156

Application of plasma spray deposited coatings for seawater activated batteries

157

Application of Plasma Technology in Environmental Techniques

158

Application of plastic framing requirements for polar ships

159

Application of plastics and paper as food packaging materials – An overview

160

Application of Plate and Component Efficiency Correlations in Homogeneous Azeotropic Distillation Processes

161

Application of platelet CVD diamond to micromachine elements

162

Application of Platelet-Rich Gel to Enhance Wound Healing in the Horse: A Case Report

163

Application of Platelet-rich Plasma (PRP) with Different Scaffolds in Tissue Engineering

164

Application of platelet-rich plasma and platelet lysate in the treatment of experimental lymphocutaneous sporotrichosi

165

Application of platysma muscle suture after thyroidectomy

166

Application of PLC to dynamic control system for liquid He cryogenic pumping facility on JT-60U NBI system

167

Application of PLE for the determination of essential oil components from Thymus vulgaris L.

168

Application of PLGA-collagen hybrid mesh for three-dimensional culture of canine anterior cruciate ligament cells

169

Application of PLS and Back-Propagation Neural Networks for the estimation of soil properties

170

Application of PLS regression to fluorimetric data for the determination of furosemide and triamterene in pharmaceutical preparations and triamterene in urine

171

Application of PLSR in correlating physical and chemical properties of pork ham with different cooling methods

172

Application of Pluronic copolymer liquid crystals for the capillary electrophoretic separation of collagen type I cyanogen bromide fragments

173

Application of Pluronic P123 in Suspension Form as a Corrosion Inhibitor for Zinc in Alkaline Battery Electrolyte

174

Application of pnet-cn/chess to a spruce stand in Solling, Germany

175

Application of pnet-cn/chess to a spruce stand in Solling, Germany

176

Application of POD-based dynamical systems to dispersion and deposition of particles in turbulent channel flow

177

Application of point-group bases to fN−fN−1d transitions of lanthanide and actinide ions doped in crystals Original Research Article

178

Application of point-to-point matching algorithms for background correction in on-line liquid chromatography–Fourier transform infrared spectrometry (LC–FTIR)

179

Application of Poisson Hidden Markov Model to Predict Number of PM2.5 Exceedance Days in Tehran During 2016-2017

180

Application of policy analysis frameworks in tobacco control research: A systematic review of qualitative literature

181

Application of Pollution Indices and Health Risk Assessment of Heavy Metals in the waters of a South-eastern Nigeria River

182

Application of poloidal beta and plasma internal inductance in determination of input power time of Damavand tokamak

183

Application of poly (ethyleneimine) solution as a binding agent in DGT technique for measurement of heavy metals in water

184

Application of poly(butyl methacrylate-co-ethylene glycol dimethacrylate) monolith microextraction coupled with high performance liquid chromatography to the determination of polycyclic aromatic hydrocarbons in smoked meat products

185

Application of poly(dimethylsiloxane)/glass microchip for fast electrophoretic separation of serum small, dense low-density lipoprotein

186

Application of poly(ethylene terephthalate)-graft-polystyrene membranes in pervaporation Original Research Article

187

Application of Poly(N, N′- dibromo-N-ethyl-naphthyl-2, 7-disulfonamide) for the Regioselective Synthesis of New 3-Sulfenyl Indole Derivatives

188

Application of Poly(nicotinamide) Modified Carbon Paste Electrode Sensor for the Electrocatalytic Determination of Acetaminophen and Folic Acid

189

Application of Poly(thienylene vinylene) as a chemiresistor for organic vapours

190

Application of polyacrylamide slab gel electrophoresis to the analysis and small-scale purification of amyloid proteins Review Article

191

Application of polyaluminum chloride prepared by a membrane reactor to dyestuff wastewater Original Research Article

192

Application of polyaniline (emeraldine base, EB) in polymer light-emitting devices

193

Application of polyaniline and polypyrrole composites for paper mill wastewater treatment Original Research Article

194

Application of polyaniline as enzyme based biosensor

195

Application of polyaniline nanocomposite coated on rice husk ash for removal of Hg(II) from aqueous media

196

Application of polyaniline nanowires electrodeposited on the FTO glass substrate as a counter electrode for low-cost dye-sensitized solar cells

197

Application of polyaniline/poly(p-styrenesulfonic acid) composite prepared by post-polymerization technique to positive active material for a rechargeable lithium battery

198

Application of polyaniline-Langmuir-Blodgett films as a glucose biosensor

199

Application of poly-arginine fused minichaperone to renaturation of cyclodextrin glycosyltransferase expressed in recombinant Escherichia coli

200

Application of polydentate chiral amines within magnesium-mediated asymmetric deprotonation reactions

201

Application of polydimethylsiloxane rod extraction to the determination of sixteen halogenated flame retardants in water samples Original Research Article

202

Application of Polyelectrolytes Obtained by Radiation Processing to Potable and Waste Water Treatment

203

Application of Polyethylene Glycol Grafted-CuO Nanoparticles in Solid Phase Extraction of Phthalate Esters in Baby Shampoo and Body Wash

204

Application of polyethylene glycol-based aqueous biphasic reactive extraction to the catalytic oxidation of cyclic olefins

205

Application of Polyhydroxyalkanoates in Medicine and the Biological Activity of Natural Poly(3-Hydroxybutyrate)

206

Application of polymaleimidostyrene as a convenient immobilization reagent of enzyme in biosensor

207

Application of polymer admixtures to modify concrete properties: Effects of polymer type and content

208

Application of polymer based stationary phases in high performance liquid chromatography and capillary high performance liquid chromatography hyphenated to microcoil 1H nuclear magnetic resonance spectroscopy

209

Application of polymer composites in civil construction: A general review

210

Application of Polymer Supported Base in Solid Phase Synthesis: Convenient Synthesis of N-Aryl-N-benzyl Piperazine Derivatives

211

Application of polymerase chain reaction in detection of egg drop syndrome (EDS) virus

212

Application of polymerase chain reaction in detection of egg drop syndrome (EDS) virus

213

Application of Polymerase Chain Reaction in Diphtheria Laboratory Examination: A Field Need

214

Application of polymerase chain reaction-denaturing gradient gel electrophoresis for comparison of direct and indirect extraction methods of soil DNA used for microbial community fingerprinting

215

Application of polymeric foams for separation, storage and absorption of hydrogen Original Research Article

216

Application of polymeric quenchant in heat treatment of crack-sensitive steel mechanical parts: Modeling and experiments

217

Application of Polymeric Quenchants in Heat Treatment of Steels

218

Application of polymeric solvent resistant nanofiltration membranes for biodiesel production

219

Application of polymeric water absorbent film to the study of drop size-resolved fog samples

220

Application of polymer-modified nanoporous silica to adsorbents of uranyl ions

221

Application of Polymers in Foods: H.N. Cheng, G.L. Cote, I.C. Baianu (Eds.); Wiley–VCH Verlag GmbH, D-69469 Weinham, Germany, 1999, 282 pages, ISBN 3-527-29808-8, £70.00

222

Application of polymer-supported triphenyl phosphine in the palladium-catalyzed cyanation reaction under microwave conditions

223

Application of polymethacrylate resin as stationary phase in liquid chromatography with UV detection for C1–C7 aliphatic monocarboxylic acids and C1–C7 aliphatic monoamines

224

Application of polynomial chaos in stability and control

225

Application of polynomial method to on-line list colouring of graphs

226

Application of polynomial models to predict growth of mixed cultures of Pseudomonas spp. and Listeria in meat

227

Application of polynomial projection ensembles to hedging crude oil commodity risk

228

APPLICATION OF POLYNUCLEAR AROMATIC HYDROCARBONS IN CHEMICAL FINGERPRINTING: THE NIGER DELTA CASE STUDY

229

APPLICATION OF POLYNUCLEAR AROMATIC HYDROCARBONS IN CHEMICAL FINGERPRINTING: THE NIGER DELTACASE STUDY

230

Application of polyol process to prepare AC-supported nanocatalyst for VOC oxidation Original Research Article

231

Application of polyoxometalate-based composites for sensor systems: A review

232

Application of polyphenylmethylsiloxane coated fiber for solid-phase microextraction combined with microwave-assisted extraction for the determination of organochlorine pesticides in Chinese teas

233

APPLICATION OF POLYPROPYLENE NONWOVEN FABRICS FOR CEMENT COMPOSITES REINFORCEMENT

234

Application of Polypyrrole Coated Stainless-Steel Wire to the Headspace Solid-Phase Microextraction of Aliphatic Amines

235

Application of polypyrrole/TiO2 composite films as corrosion protection of mild steel

236

Application of Polysaccharide-Based Materials in Food Packaging

237

Application of polysulfone (PSf)– and polyether ether ketone (PEEK)–tungstophosphoric acid (TPA) composite membranes for water electrolysis

238

Application of polysulfone/cyclodextrin mixed-matrix membranes in the removal of natural organic matter from water

239

Application of Polysystem Theory to English to Persian Translations of Rowling’s Harry Potter and the Chamber of Secrets

240

Application of polyurethane foam as a sorbent for trace metal pre-concentration — A review

241

Application of polyurethane foam as a sorbent for trace metal pre-concentration — A review

242

Application of polyurethane foam loaded with BTAC in an on-line preconcentration system: cadmium determination by FAAS

243

Application of polyurethane foam units and calorimetry to microbial monitoring in Lake Donghu

244

Application of Polyvinyl Chloride- Halloysite Nanotubes/Uio66-NH2 Mixed Matrix Membranes in Separation of Sunflower Oil from Water

245

Application of Pontryaginʹs Minimal Principle to the energy management strategy of plugin fuel cell electric vehicles

246

Application of Pop Quiz Method in Teaching Biostatistics to Postgraduate Midwifery Students and Its Effect on Their Statistics Anxiety, Test Anxiety and Academic Achievement: A QuasiExperimental Study with Control Group

247

Application of population balance model to HPGR crushing

248

Application of population balances in the chemical industry -- current status and future needs

249

Application of pork fat diacylglycerols in meat emulsions

250

Application of porous anodic alumina monolith catalyst in steam reforming of dimethyl ether: Cu/γ-Al2O3/Al catalyst degradation behaviors and catalytic activity improvement by pre-competition impregnation method

251

Application of porous medium approach to simulate UCG process

252

Application of porous membrane protected micro-solid-phase-extraction combined with gas chromatography–mass spectrometry for the determination of estrogens in ovarian cyst fluid samples Original Research Article

253

Application of porphyrins in flow-injection analysis: A review

254

Application of portable protective gaps for live work on compact 550 kV transmission lines

255

Application of position sensitive detector for the electron detachment cross-sections measurement

256

Application of position sensitive detector for the electron detachment cross-sections measurement

257

Application of positive matrix factorization in source apportionment of particulate pollutants in Hong Kong

258

Application of positive matrix factorization, multi-linear engine and back trajectory techniques to the quantification of coal-fired power station pollution in metropolitan Sydney

259

Application of positron annihilation line-shape analysis to fatigue damage for nuclear plant materials Original Research Article

260

Application of positron annihilation spectroscopy on the ion implantation damaged Fe–Cr alloys

261

Application of Positron Annihilation Spectroscopy to Study the Relationship Between Microstructure and Metallurgical Property of a Commercial Pure Copper

262

Application of positron annihilation: Study of pervaporation dense membranes

263

Application of positron beam Doppler broadening technique to ion beam irradiation in nickel

264

Application of positron beams to the study of positronium-forming solids

265

Application of Postʹs formula to optical pulse propagation in dispersive media

266

Application of potassium chloride to a Chernobyl-contaminated lake: modelling the dynamics of radiocaesium in an aquatic ecosystem and decontamination of fish

267

Application of potassium tetrafluorobromate to the rapid decomposition and determination of noble metals in chromites and related materials

268

Application of Potential Field Method for Path Planning of Wheeled Mobile Robots

269

Application of potentiometric method using a cell without liquid junction to underway pH measurements in surface seawater

270

Application of potentiometric stripping analysis for speciation of copper complexes with adsorbable ligands on the mercury electrode

271

Application of potentiometric stripping analysis with constant inverse current for determining soluble lead in human teeth

272

Application of potentiometric stripping analysis with constant inverse current for determining soluble lead in human teeth Original Research Article

273

Application of potentiometry to characterize acid and basic sites in humic substances Testing the BEST7 program with a weak-acid mixture

274

Application of potentiometry to characterize acid and basic sites in humic substances: Testing the BEST7 program with a weak-acid mixture Original Research Article

275

Application of powder metallurgy and hot rolling processes for manufacturing aluminum/alumina composite strips

276

Application of power functions to chromatographic data for the enhancement of signal to noise ratios and separation resolution

277

Application of power plant flue gas in a photobioreactor to grow Spirulina algae, and a bioactivity analysis of the algal water-soluble polysaccharides

278

Application of power ultrasound in leather processing: an eco-friendly approach

279

Application of Power-Law Frequency Fractal Model for Recognition of Vertical Cu Distribution in Milloieh Porphyry Deposit, SE Iran

280

Application of p-phenylenediamine as an electrochemical substrate in peroxidase-mediated voltammetric enzyme immunoassay Original Research Article

281

Application of practical fuzzy arithmetic to fuzzy internal model control

282

Application of practical fuzzy arithmetic to fuzzy internal model control

283

Application of prebending effect to high strength Nb3 Sn strands

284

Application of precise 142Nd/144Nd analysis of small samples to inclusions in diamonds (Finsch, South Africa) and Hadean Zircons (Jack Hills, Western Australia)

285

Application of preconditioned block BiCGGR to the Wilson–Dirac equation with multiple right-hand sides in lattice QCD Original Research Article

286

Application of preconditioned GMRES to the numerical solution of the neutron transport equation

287

Application of preconditioned transpose-free quasi-minimal residual method for two-group reactor kinetics

288

Application of predator-prey optimization for task scheduling in cloud computing

289

Application of prediction models to performance of high paraffinic content oilfields: Case study Shen95 Block of Jinganbao Oilfield

290

Application of predictive equations of state in calculating natural gas phase envelopes and critical points

291

Application of predictive microbiology to estimate the number of Bacillus cereus in pasteurised milk at the point of consumption

292

Application of predictive modelling techniques in industry: From food design up to risk assessment

293

Application of Predictive Nursing Reduces Psychiatric Complications in ICU Patients after Neurosurgery

294

Application of Prefabricated Vertical Drain in Soil Improvement

295

Application of Preference Ranking Organization Method for Enrichment Evaluation method in energy planning regional level

296

Application of preference selection index method for decision making over the design stage of production system life cycle

297

Application of preference selection index method for decision making over the design stage of production system life cycle

298

Application of preparative high-speed counter-current chromatography for isolation and separation of schizandrin and gomisin A from Schisandra chinensis

299

Application of preparative high-speed counter-current chromatography for separation and purification of arctiin from Fructus Arctii

300

Application of preparative high-speed counter-current chromatography for separation and purification of lignans from Taraxacum mongolicum

301

Application of preparative high-speed counter-current chromatography for separation of chlorogenic acid from Flos Lonicerae

302

Application of preparative high-speed counter-current chromatography for separation of methyl gallate from Acer truncatum Bunge

303

Application of preparative high-speed counter-current chromatography for the separation of flavonoids from the leaves of Byrsonima crassa Niedenzu (IK)

304

Application of preparative high-speed counter-current chromatography/electrospray ionization mass spectrometry for a fast screening and fractionation of polyphenols

305

Application of preparative high-speed counter-current chromatography/preparative high-performance liquid chromatography mode in rapid separation of saponins

306

Application of pressure assisted electrokinetic injection technique in the measurements of DNA oligonucleotides and their adducts using capillary electrophoresis–mass spectrometry

307

Application of Pressure Nutsche Filtration and Drying Technology for Toxic Chemicals

308

Application of Pressure Nutsche Filtration and Drying Technology for Toxic Chemicals

309

Application of pressure-modulated differential scanning calorimetry to the determination of relaxation kinetics of multilamellar lipid vesicles Original Research Article

310

Application of Pressure-Volume (P-V) Fractal Models in Modeling Formation Pressure and Drilling Fluid Determination in an Oilfield of SW Iran

311

Application of pressurized fluid extraction technique in the gas chromatography–mass spectrometry determination of sterols from marine sediment samples

312

Application of pressurized fluid extraction to determine cadmium and zinc in plants Original Research Article

313

Application of pressurized liquid extraction followed by gas chromatography–mass spectrometry to determine 4-nonylphenols in sediments

314

Application of pressurized liquid extraction technology to pharmaceutical solid dosage form analysis

315

Application of primary haemocyte culture of Penaeus monodon in the assessment of cytotoxicity and genotoxicity of heavy metals and pesticides

316

Application of principal axes for registration of NMR image sequences

317

Application of principal component analysis and artificial neural networks to recognize the individual VOCs of methanol/2-propanol in a binary mixture by SAW multi-sensor array

318

Application of principal component analysis for the characterisation of a piezoelectric sensors array Original Research Article

319

Application of principal component analysis for the diagnosis of neutron overpower system oscillations in CANDU reactors

320

Application of principal component analysis for the estimation of source of heavy metal contamination in surface sediments from the Rybnik Reservoir

321

Application of principal component analysis in machine-part cell formation

322

Application of principal component analysis to detect outliers and spectral deviations in near-field surfaceenhanced Raman spectra

323

Application of principal component analysis to detect outliers and spectral deviations in near-field surface-enhanced Raman spectra Original Research Article

324

Application of principal component analysis to ECG signals for automated diagnosis of cardiac health

325

Application of principal component analysis to some earthquake related data in the Koyna region, India

326

Application of principal component analysis to the study of major cations and trace metals in fish from Tenerife (Canary Islands)

327

Application of principal component analysis to the thermal characterization of silanized nanoparticles obtained at supercritical carbon dioxide conditions Original Research Article

328

Application of principal component analysis to X-ray photoelectron spectroscopy — the role of noise in the spectra

329

Application of principal component analysis-based two-dimensional correlation spectroscopy to characterization of order–disorder transition of polystyrene-block-poly(n-pentyl methacrylate) copolymer

330

Application of principal component and hierarchical cluster analysis to classify fruits and vegetables commonly consumed in Ireland based on in vitro antioxidant activity

331

Application of principal component and hierarchical cluster analysis to classify fruits and vegetables commonly consumed in Ireland based on in vitro antioxidant activity

332

Application of Principal Component Proximity Transform and Geostatistics Methods for Volume Shale Distribution as Reservoir Characreristic Imaging in Seismic 3D

333

Application of principal components analysis to the study of salinization on the Castellon Plain (Spain)

334

Application of principles of event related open systems to business process reengineering

335

Application of Prins cyclization to the total synthesis of (+)-decytospolides A and B

336

Application of printed nanocrystalline diamond film for electron emission cathode

337

Application of prismatic constructions to gauge field theory

338

Application of Probabilistic Clustering Algorithms to Determine Mineralization Areas in Regional-Scale Exploration Studies

339

Application of probabilistic fracture mechanics to a dynamic loading situation using the example of a dynamic tension test for ceramics

340

Application of probabilistic networks for decision support in power system analysis

341

Application of probabilistic neural network for differential relaying of power transformer

342

Application of probabilistic neural network in the clinical diagnosis of cancers based on clinical chemistry data Original Research Article

343

Application of probabilistic neural networks in qualitative analysis of near infrared spectra: Determination of producing area and variety of loquats Original Research Article

344

Application of probability based multi: Objective optimization in the preparation of drug encapsulation with a designed experiment

345

Application of probability distribution to the sampling of cotton bollworms (Lepidoptera: Noctuidae) in Northern Cameroon

346

Application of probability-based multi-objective optimization in material engineering

347

Application of probe tensile method for quantitative characterisation of the stickiness of fluid foods Original Research Article

348

Application of probes having 2′-deoxyinosine for typing of single nucleotide polymorphisms (SNPs) using DNA microarray Original Research Article

349

Application of Probiotic (Bacillus subtilis) to Enhance Immunity, Antioxidation, Digestive Enzymes Activity and Hematological Profile of Shaoxing Duck

350

Application of problem based learning (PBL) in a course on financial accounting principles

351

Application of process decomposition in multi-stream plate fin heat exchangers design to use in heat recovery networks

352

Application of process mineralogy as a tool in sustainable processing

353

Application of Prochaskaʹs transtheoretical model of change to patients with eating disorders

354

Application of PRODAN fluorescent probe to measure surface hydrophobicity of proteins interacting with κ-carrageenan

355

Application of product differential semantics to quantify purchaser perceptions in housing assessment

356

Application of profiled ejector in chemical lasers

357

APPLICATION OF PROFIT AND LOSS SHARING MODES IN TRADE FINANCING FOR SMALL-SCALE BUSINESSES: AN ALTERNATIVE TO DEBT BASED FINANCING

358

Application of Program Packages EMTDC and Matlab in the Analysis of Impact of Neutral Point Operating Regime on the Magnitude of Touch Voltage

359

Application of program slicing in algorithmic debugging

360

Application of programmed-temperature split/splitless injection to the trace analysis of aliphatic hydrocarbons by gas chromatography

361

Application of progressive fracture analysis for predicting failure envelopes and stress–strain behaviors of composite laminates: a comparison with experimental results

362

Application of progressive freeze-concentration for desalination Original Research Article

363

Application of progressive nucleation mechanism for the citation behavior of individual papers of different authors

364

Application of projection pursuit learning to boundary detection and deblurring in images

365

Application of PROMETHEE method for green supplier selection: a comparative result based on preference functions

366

Application of PROMETHEE-GAIA method for non-traditional machining processes selection

367

Application of Proper Orthogonal Decomposition (POD) to inverse problems in saturated groundwater flow

368

Application of proper orthogonal decomposition to the discrete Euler equations

369

Application of properties of the right-hand sides of evolution equations to an investigation of nonlocal evolution problems Original Research Article

370

Application of propidium monoazide quantitative PCR for selective detection of live Escherichia coli O157:H7 in vegetables after inactivation by essential oils

371

Application of propidium monoazide-qPCR to evaluate the ultrasonic inactivation of Escherichia coli O157:H7 in fresh-cut vegetable wash water

372

Application of Propolis Ethanol Extract and Propolis Nanoemulsion in Treatment of Cutaneous Infection in Rabbit

373

Application of Protection Motivation Theory to the Study of the Factors Related to Skin Cancer Preventive Behaviors in Students

374

Application of Protection Motivation Theory to the Study of the Factors Related to Skin Cancer Preventive Behaviors in Students

375

Application of Protection Motivation Theory to the Study of the Factors Related to Skin Cancer Preventive Behaviors in Students

376

Application of protein-coupled liposomes to effective affinity screening from phage library

377

Application of Proteomic Profiling Based on 2D-DIGE for Classification of Compounds According to the Mechanism of Action Original Research Article

378

Application of proteomic technologies to discover and identify biomarkers for excessive alcohol consumption: A review

379

Application of Proteomic Tools in Food Quality and Safety

380

Application of proteomics for comparison of proteome of Neospora caninum and Toxoplasma gondii tachyzoites

381

Application of proteomics in cardiovascular medicine

382

Application of proteomics to understand the molecular mechanisms behind meat quality

383

Application of Proton Chemical Shift Imaging in Monitoring of Gamma Knife Radiosurgery on Brain Tumors

384

Application of PRSV2 equation of state and explicit pressure dependence of the Langmuir adsorption constant to study phase behavior of gas hydrates in the presence and absence of methanol

385

Application of PRSV2 equation of state to predict hydrate formation temperature in the presence of inhibitors

386

Application of pseudo-derivative-feedback algorithm in greenhouse air temperature control

387

Application of pseudo-fluid approximation to evaluation of flow velocity through gravel beds

388

Application of Psf–PPSS–TPA composite membrane in the all-vanadium redox flow battery

389

APPLICATION OF PSO FOR FUZZY LOAD FREQUENCY DESIGN WITH CONSIDERING SUPERCONDUCTING MAGNETIC ENERGY STORAGE

390

Application of PSO technique for GEP in restructured power systems

391

Application of PSO-artificial neural network and response surface methodology for removal of methylene blue using silver nanoparticles from water samples

392

APPLICATION OF PSO-TVAC TO IMPROVE LOW FREQUENCY OSCILLATIONS

393

Application of PSP in low speed flows

394

Application of Psychology Theory in Multimedia Courseware

395

Application of Pt + RuO2 catalysts prepared by thermal decomposition of polymeric precursors to DMFC

396

Application of Pt sputter-deposited counter electrodes based on micro-patterned ITO glass to quasi-solid state dye-sensitized solar cells

397

Application of PTR-TOF-MS to investigate metabolites in exhaled breath of patients affected by coeliac disease under gluten free diet

398

Application of PTV injection in GC analysis of PAHs emitted from incense burning in indoor environment

399

Application of pulse charging techniques to submarine lead-acid batteries

400

Application of pulse detonation technology for boiler slag removal

401

Application of pulse discharge sintering (PDS) technique to rapid synthesis of Ti3SiC2 from Ti/Si/C powders

402

Application of pulse height spectral analysis to double-label counting of 35S−32P

403

Application of Pulse Method to Incremental Slitting Measurement of Residual Stresses in Laminated Composites

404

Application of pulse mixing method in software coincidence counting

405

Application of pulsed digital oscillators to volatile organic compounds sensing

406

Application of Pulsed Eddy Current Technique in Stress and Residual Stress Measurement

407

Application of Pulsed Electric Fields to Skim Milk inoculated with Staphylococcus aureus

408

Application of Pulsed Field Gel Electrophoresis for Study of Genetic Diversity in Mycobacterium tuberculosis Strains Isolated From Tuberculosis Patients

409

Application of pulsed laser irradiation for removal of hydrogen retained in tungsten

410

Application of pulsed laser methods to in situ probing of highway originated pollutants

411

Application of pulsed light to patulin reduction in McIlvaine buffer and apple products

412

Application of pulsed-field gel electrophoresis for molecular identification of pathogenic Leptospira species in Iran: a rapid and reliable method

413

Application of pulsed-field gel electrophoresis to characterise and trace the prevalence of Enterobacter sakazakii in an infant formula processing facility

414

Application of pulse-shape discrimination to coplanar CdZnTe detectors

415

Application of pulse-shape discrimination to coplanar CdZnTe detectors

416

APPLICATION OF PUMICE AGGREGATE IN STRUCTURAL LIGHTWEIGHT CONCRETE

417

Application of purge and trap extraction and gas chromatography for determination of minor esters in cider

418

Application of push-off shear test for evaluation of wetting-interface structure-bonding relationship of solder joints

419

Application of PV and Solar Energy in Water Desalination System

420

Application of PVPP-OXA as an Efficient Catalyst for the Synthesis of Mono and Bulky 1,8-dioxooctahydroxanthenes

421

Application of PWO crystals for detection of low-activity gamma-radiation in the energy range above 3 MeV

422

Application of PWO crystals for detection of low-activity gamma-radiation in the energy range above 3 MeV

423

Application of pyridylazo and thiazolylazo reagents in flow injection preconcentration systems for determination of metals

424

Application of pyrolysis-gas chromatography and hierarchical cluster analysis to the discrimination of the Chinese traditional medicine Dendrobium candidum Wall. ex Lindl.

425

Application of pyrolysis-gas chromatography and hierarchical cluster analysis to the discrimination of the Chinese traditional medicine Dendrobium candidum Wall. ex Lindl.

426

Application of pyrolysis–gas chromatography/mass spectrometry for characterisation of dissolved organic matter before and after alum treatment

427

Application of pyrolysis–gas chromatography/mass spectrometry for the identification of polymeric materials in failure analysis in the automotive industry

428

Application of pyrolysis-gas chromatography/mass spectrometry to study changes in the organic matter of macro- and microaggregates of a Mediterranean soil upon heating

429

Application of pyrolysis-gas chromatography-mass spectrometry to the analysis of pitch deposits and synthetic polymers in pulp and pulp mills

430

Application of pyrolysis-GC/MS for rapid assessment of organic contamination in sediments from Barcelona harbor

431

Application of Q-learning with temperature variation for bidding strategies in market based power systems

432

Application of QSAR analysis to organic anion transporting polypeptide 1a5 (Oatp1a5) substrates Original Research Article

433

Application of QSAR Method in the Design of Enhanced Antimalarial Derivatives of Azetidine-2-carbonitriles, their Molecular Docking, Drug-likeness, and SwissADME Properties

434

Application of QSPR for prediction of percent conversion of esterification reactions in supercritical carbon dioxide using least squares support vector regression

435

Application of quadrature method of moments to the polydispersed droplet spectrum in transonic steam flows with primary and secondary nucleation

436

Application of qualitative and quantitative methods to enrich understanding of emotional and motivational aspects of learning

437

Application of qualitative research in management (why, when and how)

438

Application of Quality Assurance Strategies in Diagnostics and Clinical Support Services in Iranian Hospitals

439

Application of Quality Function Deployment (QFD) to improve product design quality in school furniture

440

Application of quality function deployment in the semiconductor industry: A case study

441

Application of quality management criteria to regional growth management: Lessons from South East Queensland

442

Application of quantifier elimination to a simple elastic beam finite element below a straight rigid obstacle

443

Application of quantitative coronary angiography in a cineless environment: In vivo assessment of a fully automated system for clinical use

444

Application of quantitative IR spectral analysis of bacterial cells to acetone–butanol–ethanol fermentation monitoring Original Research Article

445

Application of Quantitative Microbial Risk Assessment to analyze the public health risk from poor drinking water quality in a low income area in Accra, Ghana Original Research Article

446

Application of Quantitative Risk Assessment in Wellbore Stability Analysis of Directional Wells

447

APPLICATION OF QUANTITATIVE SOCIOLOGICAL APPROACHES IN LANDSCAPE PLANNING

448

Application of Quantitative Structure-Activity Relationship Modeling to the Evaluation of the Changes in Enzymatic Activity of Carboxypeptidase Y upon Chemical Modifications

449

Application of quantitative structure–activity relationship to the determination of binding constant based on fluorescence quenching

450

Application of Quantitative Structure–Activity Relationships for Assessing the Aquatic Toxicity of Phthalate Esters

451

Application of Quantize Solution Method for Solving Adsorption Processes Equations

452

Application of quantum chemical calculations of 13C NMR chemical shifts to quinoxaline structure determination

453

Application of quantum chemical descriptor in quantitative structure activity and structure property relationship

454

Application of quantum descriptors for predicting adsorption performance of starch and cyclodextrin adsorbents

455

Application of quantum dots as analytical tools in automated chemical analysis: A review Review Article

456

Application of quantum dots in clinical and alimentary fields using multicommutated flow injection analysis

457

Application of quantum Hall edge channels

458

Application of quantum-chemical approximations to environmental problems: Prediction of physical and chemical properties of TNT and related species Original Research Article

459

Application of quantum-inspired binary gravitational search algorithm for thermal unit commitment with wind power integration

460

Application of quartz crystal for the supercapacity studies of Ppy/anion composites

461

Application of quartz inversion phenomenon in mineral processing – A case study of siliceous manganese ores

462

APPLICATION OF QUASI MONTE CARLO INTEGRATION TECHNIQUE IN EFFICIENT CAPACITANCE COMPUTATION

463

Application of quasi-chemical models to liquid–liquid equilibrium calculations for ternary systems containing water, propionic acid and organic solvents

464

Application of quasi-isothermal thermogravimetry for estimation of some properties of hydration layers in mesoporous adsorbents

465

Application of quasi-optical approach to construct RF power supply for TeV linear colliders

466

Application of quasi-optimal weights to searches of anomalies. Statistical criteria for step-like anomalies in cumulative spectra

467

Application of quasi-optimal weights to searches of anomalies. Statistical criteria for step-like anomalies in cumulative spectra

468

Application of Quasi-Orthogonal Space-Time Block Codes in Beamforming

469

Application of QuEChERS method for extraction of selected persistent organic pollutants in fish tissue and analysis by gas chromatography mass spectrometry

470

Application of quenching to create highly triaxial residual stresses in type 316H stainless steels

471

Application of quenching to create highly triaxial residual stresses in type 316H stainless steels

472

Application of quenching to create highly triaxial residual stresses in type 316H stainless steels

473

Application of quenching–partitioning–tempering process and modification to a newly designed ultrahigh carbon steel

474

Application of Queuing Analytic Theory to Decrease Waiting Times in Emergency Department: a review

475

Application of Queuing Analytic Theory to Decrease Waiting Times in Emergency Department: Does it Make Sense?

476

Application of Queuing Analytic Theory to Decrease Waiting Times in Emergency Department: Does it Make Sense?

477

Application of queuing theory in inventory systems with substitution flexibility

478

Application of queuing theory in production-inventory optimization

479

Application of Queuing Theory to Optimize Waiting-Time in Hospital Operations

480

Application of Queuing Theory to Vehicular Traffic at Signalized Intersection in Kumasi-Ashanti Region, Ghana

481

Application of QUIZ for GM quantification in food

482

Application of quotient pyrometry to industrial pulverised coal combustion

483

Application of r- and hr-adaptive BEM to two-dimensional elastic problem

484

Application of radar and seismic methods for the investigation of temperate glaciers

485

Application of radar data to modeling rainfall-induced landslides

486

Application of radial basis function and generalized regression neural networks in non-linear utility function specification for travel mode choice modelling

487

Application of radial basis function networks for solar-array modelling and maximum power-point prediction

488

Application of radial basis function neural networks to short-term streamflow forecasting

489

Application of Radial Basis Functions — Partial Least Squares to non-linear pattern recognition problems: diagnosis of process faults

490

Application of radial basis functions to linear and nonlinear structural analysis problems

491

Application of Radial Effective Thermal Conductivity for Heat Transfer Model of Steel Coils in HPH Furnace

492

Application of radiant cooling as a passive cooling option in hot humid climate

493

Application of radiation modes to the problem of low-frequency noise from a highway bridge

494

Application of radiation sources to simulate the radiation environment in low earth orbit: results on optoelectronic devices for International Space Station

495

Application of radiation sources to simulate the radiation environment in low earth orbit: results on optoelectronic devices for International Space Station

496

Application of Radio Echo Sounding at the arid Andes of Argentina: the Agua Negra Glacier

497

Application of radio frequency identification technology to study library usersʹ information-seeking behavior Original Research Article

498

Application of radio-frequency identification systems to collision avoidance in metal/nonmetal mines

499

Application of Radio-Frequency Plasma Glow Discharge to Removal of Uranium Dioxide from Metal Surfaces

500

Application of radio-frequency wave and micro-wave devices in drying and bleaching of wooden pulp

501

Application of radioimmunoassay in the screening of polychlorinated biphenyls in cowʹs milk

502

Application of radiometric temperature determination methods to semiconductor gas sensors

503

Application of Radiomics and Decision Support Systems for Breast MR Differential Diagnosis

504

Application of radiosurgery principles to a target in the breast: A dosimetric study

505

Application of radon-222 to investigate groundwater discharge into small shallow lakes

506

Application of Raman microspectroscopy to the characterisation of bioactive materials

507

Application of Raman spectroscopy to identify iron minerals commonly found in mine wastes

508

Application of Raman spectroscopy to the characterization of carbon-based materials: Recent advances and their applications to nano-carbons

509

Application of Raman spectroscopy to the study of the phase composition of phosphate based glass-ceramics

510

Application of Ramsey model in transition economy: A Russian case study

511

Application of Random Amplified Microsatellite Polymorphism (RAMP) in Prunus Characterization and Mapping

512

Application of Random Amplified Polymorphic Analysis for the Detection Genetic Variation in Tomato (Lycopersicon Esculentum Mill.)

513

Application of Random Amplified Polymorphic DNA (RAPD) to Detect the Genotoxic Effect of Cadmium on Tow Iranian Ecotypes of cumin (Cuminum cyminum)

514

Application of random and regular input in analytical separation methods: A critical insight

515

Application of random forests method to predict the retention indices of some polycyclic aromatic hydrocarbons

516

Application of random forests to select premium quality vegetable oils by their fatty acid composition

517

Application of random matrix theory to quasiperiodic systems

518

Application of random pore model for synthesis gas production by nickel oxide reduction with methane

519

Application of Random Radial Point Interpolation Method to Foundations Bearing Capacity Considering Progressive Failure

520

Application of random restart to genetic algorithms

521

Application of random theory in determining the optimum producing well numbers for oil and gas reservoirs

522

Application of Randomization Techniques to Space-Time Convolutional Codes

523

Application of Rank(Sr), a maturity index based on chemical analyses of coals

524

Application of RANS turbulence closure models to flows subjected to electromagnetic and buoyancy forces

525

Application of RAPD (Random Amplified Polymorphic DNA) marker for sex determination of Pistacia vera L.

526

Application of RAPD and cytochrome b sequences to the study of genetic variations in F1 and F2 generations of two different strains of guppy (Poecilia reticulata, Peter 1854)

527

Application of RAPD-PCR for Virulence Type Analysis within Verticillium dahliae and V. longisporum

528

Application of rapid and simple liquid chromatography method for determination of bioequivalence of generic lamotrigine tablets in healthy Iranian volunteers

529

Application of Rapid Prototyping in Prosthodontics

530

Application of rapid random stimulation (RRS) to visual evoked potentials in children

531

Application of rapid solidification powder metallurgy processing to prepare Cu–Al–Ni high temperature shape memory alloy strips with high strength and high ductility

532

Application of rapid solidification powder metallurgy to the fabrication of high-strength, high-ductility Mg–Al–Zn–Ca–La alloy through hot extrusion Original Research Article

533

Application of Rapid Visco Analyser (RVA) viscograms and chemometrics for maize hardness characterisation

534

Application of rapidly generated bidentate ligand libraries to zinc catalyzed reductions

535

Application of rare earth elements in cemented carbide inserts, drawing dies and mining tools

536

Application of rare earth elements in cemented carbide inserts, drawing dies and mining tools

537

Application of Rare Earth Phosphate Fertilizer in Western Area of China

538

Application of Rare Earths in Advanced Ceramic Materials

539

Application of Rasch Analysis for Development and Psychometric Properties of Adolescents’ Quality of Life Instruments: A Systematic Review

540

Application of Rasch model for evaluating the quality of life in blind war veterans

541

Application of Rasch Model in Constructing Walkability Indices for Urban Neighborhood Area

542

Application of rate-ratio asymptotics to the prediction of extinction for methanol droplet combustion

543

Application of rational functions for the standard addition method

544

Application of raw and roasted date seeds for dyes removal from aqueous solution

545

Application of rbcL based molecular diversity analysis to algae in wastewater treatment plants

546

Application of RBF neural network to fault classification and location in transmission lines

547

Application of RBGR—a simple way for screening of oxygen tolerance in probiotic bacteria

548

Application of RCM for safety considerations in a steel plant

549

Application of RCM for safety considerations in a steel plant

550

Application of RCM to a medium scale industry

551

Application of RCM to a medium scale industry

552

Application of reaction calorimetry toward understanding the large scale chemistry of ethyl diazoacetate

553

Application of reaction sintering to the manufacturing of a spacecraft combustion chamber of SiC ceramics

554

Application of reactive cyclodextrin poly butyl acrylate preformed polymers containing nano-ZnO to cotton fabrics and their impact on fabric performance

555

Application of reactive cyclodextrin poly butyl acrylate preformed polymers containing nano-ZnO to cotton fabrics and their impact on fabric performance

556

Application of reactive oily bubbles to bastnaesite flotation

557

APPLICATION OF READER RESPONSE THEORY IN IRANIAN TERTIARY-LEVEL READING CLASSES: A ʹʹPRACTICAL DEMONSTRATIONʹʹ STUDY

558

Application of real options analysis for pharmaceutical R&D project valuation—Empirical results from a survey

559

Application of real options theory to forestry investment analysis

560

Application of real time PCR determination to assess interanimal variabilities in CYP1A induction in the European flounder (Platichthys flesus)

561

Application of real-time in situ spectroscopic ellipsometry and infrared spectroscopy for characterizing interface structure of a-Si:H layer

562

Application of real-time PCR assay for detection and quantification of Alexandrium tamarense and Alexandrium catenella cysts from marine sediments

563

Application of real-time PCR for quantitative determination of hepatic vitellogenin transcript levels in the striped sea bream, Lithognathus mormyrus

564

Application of real-time PCR for the detection of Strongyloides spp. in clinical samples in a reference center in Spain

565

Application of real-time PCR for total airborne bacterial assessment: Comparison with epifluorescence microscopy and culture-dependent methods

566

Application of Real-Time PCR method for evaluation of measles vaccine heat stability

567

Application of real-time PCR on the development of molecular markers and to evaluate critical aspects for olive oil authentication

568

Application of real-time PCR to detect Listeria monocytogenes in a mussel processing industry: Impact on control

569

Application of real-time quantitative PCR for the detection of selected bacterial pathogens during municipal wastewater treatment

570

Application of real-time RT-PCR to quantifying gene expression of matrix metalloproteinases and tissue inhibitors of metalloproteinases in human abdominal aortic aneurysm

571

Application of real-time RT–PCR to study gene expression in active dry yeast (ADY) during the rehydration phase

572

Application of real-time voltage security assessment to the Hellenic interconnected system

573

Application Of Recent Innovative Ideas In IOT And Communication For Rural Development

574

Application of recent iron evaluations of ENDF/B, JEF and JENDL to neutron transport calculations through light water reactor pressure vessel

575

Application of recently developed approaches to microstructural characterization and yield strength modeling of aluminum alloy AA7030

576

Application of recently developed elliptic blending based models to separated flows

577

Application of receptor modeling to atmospheric constituents at Potsdam and Stockton, NY

578

Application of receptor models on water quality data in source apportionment in Kuantan River Basin

579

Application of recipes for isothermal and isochronal solid-state transformations

580

Application of Recombinant Proteins for Serodiagnosis of Visceral Leishmaniasis in Humans and Dogs

581

Application of reconstruction techniques to correctly identify the myocardium in the presence of overlying organs

582

Application of recoverable nanosized palladium(0) catalyst in Sonogashira reaction

583

APPLICATION OF RECTIFIED-VOLTAGE PWM FOR POWER FACTOR CORRECTION

584

APPLICATION OF RECTIFIED-VOLTAGE PWM FOR POWER FACTOR CORRECTION

585

Application of recurrence plots as a new tool in the analysis of electrochemical oscillations of copper

586

Application of recurrent neural network to predict bacterial growth in dynamic conditions

587

Application of recurrent neural networks in batch reactors: Part II: Nonlinear inverse and predictive control of the heat transfer fluid temperature

588

Application of recurrent neural networks in bCitch reactors Part 1. NARMA modelling of the dynamic behaviour of the heat transfer fluid temperature

589

Application of recycled coarse aggregate by mixture to concrete construction

590

Application of Recycled Rubber from Scrap Tyres in the Adsorption of Toluene from Aqueous Solution

591

Application of red mangrove plant (Rhizophora racemosa) extracts as pH indicator

592

Application of Reddyʹs third-order theory to delaminated orthotropic composite plates

593

Application of redox cycling enhanced current at an interdigitated array electrode for iron-trace determination in ultrapure spectral carbon

594

Application of reduced differential transformation method for solving Fourth-Order Parabolic Partial Differential Equations

595

Application of reduced graphene oxide and carbon nanotube modified electrodes for measuring the enzymatic activity of alcohol dehydrogenase

596

Application of reduction mammaplasty in treatment of giant breast tumour

597

Application of reduction mammaplasty in treatment of giant breast tumour

598

Application of redundancy analysis to hydroclimatology: A case study of spring heavy floods in southern Québec (Canada)

599

Application of reflectance near infrared spectroscopy for bread analyses

600

Application of Reflectance Spectroscopy for Analysis of Higher Plant Pigments

601

Application of Reflective Photography Technique in Visual-Semantic Evaluation from Citizens Point of View (Case Study: Urban Landscape of Shiraz)

602

Application of refraction contrast tomography

603

Application of refraction contrast tomography

604

Application of refractive index mixing rules in binary systems of hexadecane and heptadecane with n-alkanols at different temperatures

605

Application of refrigeration system in electronics cooling

606

Application of regional earthquake mitigation optimization

607

Application of Regional Phase Amplitude Tomography to Seismic Verification

608

Application of regression and artificial neural network analysis in modelling of tool–chip interface temperature in machining

609

APPLICATION OF REGRESSION MODEL ON STREAM WATER QUALITY PARAMETERS

610

Application of regression models to predict harmonic voltage and current growth trend from measurement data at secondary substations

611

Application of regularization methods to damage detection in large scale plane frame structures using incomplete noisy modal data

612

Application of regulations to cosmetic lasers in private practice

613

Application of regulations to cosmetic lasers in private practice

614

Application of reinforced frontal affinity chromatography and advanced processing procedure to the study of the binding property of a Caenorhabditis elegans galectin

615

Application of reinforcement learning for agent-based production scheduling

616

Application of reinforcement learning in robot soccer

617

Application of reinforcement learning to the game of Othello

618

Application of relations of singularity intensities of tangent derivatives of boundary displacements and tractions to BEM

619

Application of relative positioning in topographic survey preparations on a full basis in artillery

620

Application of relaxation periods during electrodialysis of a casein solution: Impact on anion-exchange membrane fouling

621

Application of relevance vector machine and survival probability to machine degradation assessment

622

Application of reliability analysis method to fusion component testing

623

Application of Reliability in Stability Analysis of an Earth Dam

624

Application of reliability models with covariates in spare part prediction and optimization – A case study

625

Application of reliability models with covariates in spare part prediction and optimization – A case study

626

Application of remediation techniques for immobilization of metals in soils contaminated by a pyrite tailing spill in Spain

627

Application of remote handling compatibility on ITER plant

628

Application of remote sensing and geographic information data in developing soil classificatoin maps of some soils in nile-delta

629

Application of remote sensing and geographical information system in mapping land cover of the national park

630

Application of Remote Sensing in Diseases Monitoring and Dispersion

631

Application of Remote Sensing in Lithological Mapping of Umm Tawat Precambrian Rock Assemblage, North Eastern Desert, Egypt

632

Application of Remote Sensing in Monitoring of Faults

633

Application of remote sensing in the hydrotectonic Analysis of Groundwater, West of Yazd, Central Iran

634

Application of Remote Sensing in the Identification of the Geological Terrain Features in Cameron Highlands, Malaysia(Aplikasi Penderiaan Jauh di dalam Pengcaman Fitur Terain Geologidi Cameron Highlands, Malaysia)

635

Application of Remote Sensing Techniques and GIS-Multicriteria decision Analysis for Groundwater Potential Mapping in Souss Watershed, Morocco

636

Application of Remote Sensing Techniques in Enhancement, Detection, and Slicing of Koopan Lateralized Ultrabasics (South of Bavanat, Fars Province)

637

Application of remote sensing to identify coalfires in the Raniganj Coalbelt, India

638

Application of remote sensing to parks and protected area monitoring: Introduction to the special issue

639

Application of remotely sensed thermal information to urban climatology of Central European cities

640

Application of Removable Wrist Splint in the Management of Distal Forearm Torus Fractures

641

Application of renewable energy sources and new building technologies for the Philippine single family detached house

642

Application of renewable energy sources in the Greek islands of the South Aegean Sea

643

Application of renewable silver amalgam annular band electrode to voltammetric determination of vitamins C, B1 and B2

644

Application of renewal theory to call handover counting and dynamic location management in cellular mobile networks

645

Application of Renormalization Group Model to the Numerical Simulation of Tidal Current in the Qiongzhou Channel

646

Application of renormalization group techniques to transport in the presence of nonlinear sources and sinks

647

Application of Repetitive Extragenic Palindromic Elements Based on PCR in Detection of Genetic Relationship of Lactic Acid Bacteria Species Isolated from Traditional Fermented Food Products

648

Application of Replacement Theory in Determination of Pavement Design Life

649

Application of replicated difference testing

650

Application of Reproducing Kernel Particle Methods in electromagnetics Original Research Article

651

Application of reproductive biotechnology in animals: implications and potentials: Applications of reproductive cloning

652

application of republic of indonesia supreme court regulation no. 13 of 2016 concerning procedures for subscribing to criminal cases by corporations in corporate criminal responsibility in indonesia based on the decision of the central jakarta district court number: 94 / pid.sus-tpk / 2017 / pn. jkt.pst

653

Application of RES methods for computation of hydrodynamic flows by an example of a 2D flow past a circular cylinder for Re = 5–200

654

Application of resampling and linear spline methods to spectral and dispersional analyses of long-memory processes

655

Application of resampling and linear spline methods to spectral and dispersional analyses of long-memory processes

656

Application of residual correction method to laser heating process

657

Application of residual modification approach in seasonal ARIMA for electricity demand forecasting: A case study of China

658

Application of resilience thinking to evaluate the urban environments; a case study of Tehran, Iran

659

Application of resistance heating technique to mushy state forming of aluminium alloy

660

Application of resistance sintering technique to fabrication of metal matrix composite

661

Application of resonance functions in estimating the parameters of interwell zones

662

Application of resonant laser postionization SNMS for quantitative depth profiling in stainless steel with oxide film

663

Application of resonant ultrasound spectroscopy to determine elastic constants of plasma-sprayed coatings with high internal friction

664

Application of Resource-Based View Theory in Assessing of Efficiency of Companies Accepted in Tehran Stock Exchange by Data Envelopment Analysis

665

Application of respiration and FDA hydrolysis measurements for estimating microbial activity during composting processes

666

Application of response surface analysis to the photolytic degradation of Basic Red 2 dye

667

Application of response surface design to solvent, temperature and lipase selection for optimal monoglyceride production

668

Application of response surface method for optimization of dispersive liquid–liquid microextraction of water-soluble components of Rosa damascena Mill. essential oil

669

Application of response surface method for predicting electroless nickel plating

670

Application of Response Surface Method for Preparation, Optimization, and Characterization of Nicotinamide Loaded Solid Lipid Nanoparticles

671

Application of Response Surface Methodolody to Prediction of Dilution in Plasma Transferred Arc Hardfacing of Stainless Steel on Carbon Steel Original Research Article

672

Application of Response Surface Methodology for Removal of Remazol Yellow (RR) by Immobilised S. cerevisiae on Pumice Stone

673

Application of Response Surface Methodology (RSM) for Culture Conditions and Biomass Production of Psychrophilic Microalgae Isolated from High Mountains Lake During the ice-free Season

674

Application of response surface methodology (RSM) for optimization of ammoniacal nitrogen removal from palm oil mill wastewater using limestone roughing filter

675

Application of response surface methodology (RSM) for optimization of ammoniacal nitrogen removal from semi-aerobic landfill leachate using ion exchange resin Original Research Article

676

Application of response surface methodology (RSM) for optimization of sintering process for the preparation of magnesia partially stabilized zirconia (Mg-PSZ) using natural baddeleyite as starting material

677

Application of response surface methodology (RSM) in condition optimization for essential oil production from Citrus latifolia

678

Application of response surface methodology (RSM) to the optimization of a post-column luminol chemiluminescence analysis of silyl peroxides

679

Application of Response Surface Methodology and Artificial Neural Network for Analysis of p-chlorophenol Biosorption by Dried Activated Sludge

680

Application of response surface methodology and artificial neural network methods in modelling and optimization of biosorption process

681

Application of response surface methodology and artificial neural networks for optimization of recombinant Oryza sativa non-symbiotic hemoglobin 1 production by Escherichia coli in medium containing byproduct glycerol

682

Application of response surface methodology and central composite design for the optimisation of supercritical fluid extraction of essential oils from Myrtus communis L. leaves

683

Application of response surface methodology and central composite design for the optimization of textile dye degradation by wet air oxidation

684

Application of response surface methodology and central composite rotatable design for modeling and optimization of a multi-gravity separator for chromite concentration

685

Application of response surface methodology and central composite rotatable design for modeling the influence of some operating variables of a Multi-Gravity Separator for coal cleaning

686

Application of Response Surface Methodology as an Efficient Approach for Optimization of Operational Variables in Benzene Hydroxylation to Phenol by V/SBA-16 Nanoporous Catalyst

687

Application of Response Surface Methodology for Catalytic Hydrogenation of Nitrobenzene to Aniline Using Ruthenium Supported Fullerene Nanocatalyst

688

Application of response surface methodology for extraction optimization of germinant pumpkin seeds protein

689

Application of response surface methodology for glucan production from Leuconostoc dextranicum and its structural characterization

690

Application of response surface methodology for glucan production from Leuconostoc dextranicum and its structural characterization

691

Application of response surface methodology for modeling and optimization of membrane distillation desalination process

692

Application of response surface methodology for modeling of ball mills in copper sulphide ore grinding

693

Application of Response Surface Methodology for Modeling the Color Strength of Natural Hair Colorant

694

Application of response surface methodology for optimization and determination of nickel by syringe to syringe dispersive liquid phase micro-extraction in environmental water and herb samples coupled with flame atomic absorption spectrometry

695

Application of response surface methodology for optimization of acidogenesis of cattail by rumen cultures

696

Application of response surface methodology for optimization of azo dye removal by oxalate catalyzed photoelectro-Fenton process using carbon nanotube-PTFE cathode Original Research Article

697

Application of response surface methodology for optimization of azocarmine B removal by heterogeneous photo-Fenton process using hydroxy-iron–aluminum pillared bentonite

698

Application of response surface methodology for optimization of biodiesel production by transesterification of soybean oil with ethanol

699

Application of response surface methodology for optimization of fluoride adsorption from aqueous solution using MgO-based nanocomposites

700

Application of response surface methodology for optimization of important parameters in decolorizing treated distillery wastewater using Aspergillus fumigatus UB2 60

701

Application of response surface methodology for optimization of natural organic matter degradation by UV/H2O2 advanced oxidation process

702

Application of Response Surface Methodology for Optimization of Picker-Husker Harvesting Losses in Corn Seed

703

Application of Response Surface Methodology for Optimization of Platinum(IV) Adsorption Using Magnetic Cellulose Nanoparticles Modified with Ethylenediamine

704

Application of response surface methodology for optimization of polysaccharides production parameters from the roots of Codonopsis pilosula by a central composite design

705

Application of response surface methodology for optimization of the synthesis of synthetic rutile from titania slag

706

Application of response surface methodology for optimizing transesterification of Moringa oleifera oil: Biodiesel production

707

Application of Response Surface Methodology for preparation of low-cost adsorbent from citrus fruit peel and for removal of Methylene Blue Original Research Article

708

Application of response surface methodology for protein enrichment of cassava peel as animal feed by the white-rot fungus Panus tigrinus M609RQY

709

Application of Response Surface Methodology for Sago Wastewater Treatment by Ozonation

710

Application of response surface methodology for studying the influence of soaking, blanching and sodium hexametaphosphate salt concentration on some biochemical and physical characteristics of cowpeas (Vigna unguiculata) during canning Original Research A

711

Application of response surface methodology for studying the viscosity changes during canning of tarhana, a cereal-based food Original Research Article

712

Application of response surface methodology for the optimisation of micro friction surfacing process

713

Application of Response Surface Methodology for the Optimization of Cu and Zn Removals by Sorption on Pre-treated Oil Palm Frond (OPF)

714

Application of response surface methodology for the optimization of NaOH treatment on oil palm frond towards improvement in the sorption of heavy metals Original Research Article

715

Application of response surface methodology for the optimization of oxidants in wheat flour

716

Application of response surface methodology for the optimization of supercritical carbon dioxide extraction and ultrasound-assisted extraction of Capparis spinosa seed oil

717

Application of Response Surface Methodology for the Prediction of Different Operating Parameters in the Production of Mesua Ferrea Oil Methyl Ester

718

Application of response surface methodology for thorium(IV) removal using Amberlite IR-120 and IRA-400: Ion exchange equilibrium and kinetics

719

Application of Response Surface Methodology for Xanthan Gum and Biomass Production Using Xan-thomonas campestris

720

Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel

721

Application of Response Surface Methodology in Describing the Residual Stress Distribution in CO2 Laser Welding of AISI304

722

Application of Response Surface Methodology in Development of Sirolimus Liposomes Prepared by Thin Film Hydration Technique

723

Application of Response Surface Methodology in Study of the Product Yield Distribution of Thermal Cracking of Atmospheric Gasoil

724

Application of response surface methodology in the degradation of Reactive Blue 19 using H2O2/MgO nanoparticles advanced oxidation process

725

Application of response surface methodology in the optimization of cutting conditions for surface roughness

726

Application of response surface methodology in the parametric optimization of a pin-fin type heat sink

727

Application of Response Surface Methodology in the Preparation of Pectin-Caseinate Nanocomplexes for Potential Use as Nutraceutical Formulation: A Statistical Experimental Design Analysis

728

Application of response surface methodology on efficiency of fig leaf activated carbon for removal of methylene blue dye

729

Application of response surface methodology on investigating flank wear in machining hardened steel using PVD TiN coated mixed ceramic insert

730

Application of response surface methodology to assess the combined effect of operating variables on high-pressure coal gasification for H2-rich gas production

731

Application of Response Surface Methodology to Assess the Combined Effect of Operating Variables on the Direct Reduction of Fe2O3 by Coal Volatiles

732

Application of response surface methodology to cell immobilization for the production of palatinose

733

Application of response surface methodology to drive GTN model parameters and determine the FLD of tailor welded blank

734

Application of response surface methodology to extract yields from stinging nettle under supercritical ethanol conditions

735

Application of response surface methodology to formulation of ionotropically gelled gum cordia/gellan beads

736

Application of response surface methodology to formulation of ionotropically gelled gum cordia/gellan beads

737

Application of Response Surface Methodology to laser-induced breakdown spectroscopy: Influences of hardware configuration

738

Application of Response Surface Methodology to laser-induced breakdown spectroscopy: Influences of hardware configuration

739

Application of response surface methodology to oil spill remediation

740

Application of response surface methodology to optimise extraction of flavonoids from fructus sophorae

741

Application of response surface methodology to optimise supercritical carbon dioxide extraction of essential oil from Cyperus rotundus Linn.

742

Application of Response Surface Methodology to optimization of a standard Ranque–Hilsch vortex tube refrigerator

743

Application of response surface methodology to optimize production of poly-ɛ-lysine by Streptomyces albulus IFO 14147

744

Application of Response Surface Methodology to Study the Effects of Brisket Fat, Soy Protein Isolate, and Cornstarch on Nutritional and Textural Properties of Rabbit Sausages

745

Application of response surfaces for reliability analysis of marine structures

746

Application of response surfaces for reliability analysis of marine structures

747

Application of results on Eshelby tensor to the determination of effective poroelastic properties of anisotropic rocks-like composites

748

Application of retention modelling to the simulation of separation of organic anions in suppressed ion chromatography

749

Application of reverse microdialysis in the evaluation of neural regulation of cardiovascular functions Original Research Article

750

Application of reverse osmosis technology for arsenic removal from drinking water Original Research Article

751

Application of reverse osmosis to reduce pollutants present in industrial wastewater Original Research Article

752

Application of reverse osmosis to remove aniline from wastewater Original Research Article

753

APPLICATION OF REVERSE TIME MIGRATION (RTM) PROCEDURE IN ULTRASOUND TOMOGRAPHY, NUMERICAL MODELING.

754

Application of Reverse Transcriptase –PCR (RT-PCR) for rapid detection of viable Escherichia coli in drinking water samples

755

Application of reverse transcriptase-nested-PCR for detection of poliovirus in mussels

756

Application of reversed micelles in bioengineering

757

Application of reverse-flow micellar electrokinetic chromatography for the simultaneous determination of flavonols and terpene trilactones in Ginkgo biloba dosage forms

758

Application of reversible immobilization techniques for biosensors Original Research Article

759

Application of RF electric field to a charged-particle trap in toroidal geometry

760

Application of RF electric field to a charged-particle trap in toroidal geometry

761

Application of RFID technology to prevention of collision accident with heavy equipment

762

Application of RFID tracking to the optimization of function-space assignment in buildings

763

Application of RFLP analysis of recA , gyrA and rpoS gene fragments for rapid differentiation of Erwinia amylovora from Erwinia strains isolated in Korea and Japan

764

Application of Rh(III)-Metalloporphyrin Grafted Fe3O4 Nanoparticles for the Extraction of Thiocyanate Ions from Aqueous Solutions

765

Application of RHA’s Pozzolanic Properties in the Making of CEB

766

Application of rhamnolipid as a novel biodemulsifier for destabilizing waste crude oil

767

Application of Rh-catalyzed cyclization for the construction of three consecutive chiral carbons in 4,9-dimethylspiro[4.4]nonane-2,7-dione

768

Application of Rheological Modeling in Food Emulsions

769

Application of rheological techniques for investigations of polymer branched structures

770

Application of rheology for assessment and prediction of the long-term physical stability of emulsions

771

Application of rheology to solving tailings disposal problems

772

Application of Rhizobacteria for Induced Resistance

773

Application of Rhizon SMS for the assessment of the hydrodynamic properties of unconsolidated fine grained materials

774

Application of rhodamine B thiolactone to fluorescence imaging of Hg2+ in Arabidopsis thaliana

775

Application of rhodamine B thiolactone to fluorescence imaging of Hg2+ in Arabidopsis thaliana

776

Application of ribbon burners to the flame treatment of polypropylene films

777

Application of Riboflavin-Deficient Rat Erythrocytes in the in Vitro Assay of Faba Bean Toxicity

778

Application of rice hull ash for turbidity removal from water

779

Application of rice husk and rice husk ash in organic reactions

780

Application of rice rhizosphere microflora for hydrogen production from apple pomace

781

Application of Richards function to the description of growth of Green gram

782

Application of ridge regression when the model is inherently imperfect: a case study of phase equilibrium

783

Application of Riemann-Green Functions on Solving Linearized Saint-Venants Equations

784

Application of Rietveld Refinement to Investigate the High Chromium White Cast Iron Austempered at Different Temperatures Original Research Article

785

Application of rigid body mechanics to theoretical description of rotation within F0F1-ATP synthase

786

Application of ring study: Water toxicity determinations by bioluminescence assay with Vibrio fischeri

787

Application of ring-polymer molecular dynamics to electronically nonadiabatic excess electron dynamics in water clusters: Importance of nuclear quantum effects

788

APPLICATION OF RISK ANALYSIS AND GEOGRAPHIC INFORMATION SYSTEM TECHNOLOGIES TO THE PREVENTION OF DIARRHEAL DISEASES IN NIGERIA

789

Application of risk informed safety margin characterization to extended power uprate analysis

790

Application of risk, cost–benefit and acceptability analyses to identify the most appropriate geosynthetic solution to mitigate sinkhole damage on roads

791

Application of risk-informed design methods to select the PSACS ultimate heat sink Original Research Article

792

Application of RNA interference to study stem cell function: current status and future perspectives

793

Application of RNB for high sensitive wear diagnostics in medicine technique and industry Original Research Article

794

Application of Road Information in Ground Moving Target Tracking

795

Application of robot kinematics methods to the simulation and control of neutron beam line positioning systems

796

Application of robot kinematics methods to the simulation and control of neutron beam line positioning systems

797

Application of robot offline programming in thermal spraying

798

Application of Robotic-Assisted Techniques to the Surgical Evaluation and Treatment of the Anterior Mediastinum

799

Application of robust and adaptive control techniques to cooperative manipulation

800

Application of robust and multimodel control methods to an ill-conditioned distillation column

801

Application of Robust Approach to Capacitated Location of Collection Sites and Capacitated Vehicle-routing Problem Model in an Urban Waste Management System

802

Application of Robust Estimation in Zero-difference Kinematical Orbit Determination of GPS-equipped Satellites

803

Application of robust fitting analysis techniques to low-resolution spectral data

804

Application of robust fitting analysis techniques to low-resolution spectral data

805

Application of robust multivariate control chart with Winsorized Mean: a case study

806

Application of robust NiTi–ZrO2–PEG SPME fiber in the determination of haloanisoles in cork stopper samples Original Research Article

807

Application of rock phosphate enriched composts increases nodulation, growth and yield of chickpea

808

Application of rock wool waste in cement-based composites

809

Application of Rodenticides for the Control of Zoonotic Cutaneous Leishmaniasis in Iran: A Systematic Review of the Literature

810

Application of rotary geosteering drilling in deep and thin reservoirs of Tarim Basin, NW China

811

Application of rotary microfiltration in debittering process of spent brewer s yeast

812

Application of rotating disk electrode technique for the preparation of Np, Pu and Am α-sources

813

Application of rotational resonance to inhomogeneously broadened systems

814

Application of RothPC-1 to soil carbon profiles in cracking soils under minimal till cultivation

815

Application of rough set and decision tree for characterization of premonitory factors of low seismic activity

816

Application of Rough Set Theory as a New Approach to Simplify Dams Location

817

Application of Rough Set Theory in Data Mining

818

Application of Rough Set Theory in Data Mining for Decision Support Systems (DSSs)

819

Application of rough set theory to feature selection for unsupervised clustering

820

Application of rough sets analysis to identify polluted aquatic sites based on a battery of biomarkers: a comparison with classical methods

821

Application of Ru(bpy)3 2+ in control and formation of gold surface nanostructure through oxidation–reduction cycling

822

Application of Rubber (Hevea Brasiliensis) Seeds Oil Extracted using Supercritical Carbon Dioxide in Cosmetics

823

Application of rule based methods to predicting storm surge

824

Application of rumen microbes to enhance food waste hydrolysis in acidogenic leach-bed reactors

825

Application of rumen microorganisms for anaerobic bioconversion of lignocellulosic biomass

826

Application of rumen microorganisms for enhanced anaerobic degradation of bagasse and maize bran

827

Application of run-on transcription method for studying the regulation of plastid genome expression

828

Application of rural slaughterhouse waste as an organic fertilizer for pot cultivation of solanaceous vegetables in India

829

Application of ruthenium induced cyclization for construction of strained biaryl ether macrocyclic compounds

830

Application of rutile thermometry to eclogites

831

Application of S transform in fault diagnosis of power electronics circuits

832

Application of saccharose as copper(II) ligand for electroless copper plating solutions Original Research Article

833

Application of SAFER model to the Los Angeles PM10 data

834

Application of SAFES (systematic approach to food engineering systems) methodology to apple candying Original Research Article

835

Application of safes (systematic approach to food engineering systems) methodology to dehydration of apple by combined methods Original Research Article

836

Application of SAFES (systematic approach to food engineering systems) methodology to French fries manufacture Original Research Article

837

Application of SAFES methodology in Manchego-type cheese manufacture Original Research Article

838

Application of SAFT equation for CO2 + H2O phase equilibrium calculations over a wide temperature and pressure range

839

Application of SAFT–VRX to binary phase behaviour: alkanes

840

Application of salesman-like recommendation system in 3G mobile phone online shopping decision support

841

APPLICATION OF SALICYLIC ACID AND SOME FUNGICIDES AS SEED TREATMENT FOR CONTROLLING DAMPING-OFF AND ROOT ROT DISEASES OF SQUASH AND CANTALOUPE PLANTS UNDER FIELD CONDITIONS

842

Application of salicylic acid dosimetry to evaluate hydrodynamic cavitation as an advanced oxidation process

843

Application of salicylic acid dosimetry to evaluate hydrodynamic cavitation as an advanced oxidation process

844

Application of samarium diiodide (SmI2)-induced reduction of (gamma)-acetoxy-(alpha),(beta)-enoates with (alpha)specific kinetic electrophilic trapping for the synthesis of amino acid derivatives

845

Application of sample disruption methods in the extraction of anthocyanins from solid or semi-solid vegetable samples

846

Application of Sample Selection Model in Estimating Response Functions for Nitrate Percolation

847

APPLICATION OF SAPROPEL IN AGRICULTURAL PRODUCTION

848

Application of satellite and ground-based data to investigate the UV radiative effects of Australian aerosols

849

Application of Satellite Data and Data Mining Algorithms in Estimating Coverage Percent (Case study: Nadoushan Rangelands, Ardakan Plain, Yazd, Iran)

850

Application of satellite data and GIS in studying air pollutants in Tehran

851

Application of satellite infrared data for mapping of thermal plume contamination in coastal ecosystem of Korea

852

Application of satellite remote sensing techniques for estimating air–sea CO2 fluxes in Hudson Bay, Canada during the ice-free season

853

Application of SBA-15 mesoporous material as the carrier for drug formulation systems. Papaverine hydrochloride adsorption and release study

854

Application of SBA-Pr-SO3H as a nanoreactor in the one-pot synthesis of spiroquinazolinones

855

Application of SBA-Pr-SO3H as a solid acid nanoreactor in the Biginelli reaction

856

Application of scaffold materials in tissue reconstruction in immunocompetent mammals: Our experience and future requirements

857

Application of scaled boundary finite element method in static and dynamic fracture problems

858

Application of scaled particle theory in extractive distillation with salt

859

Application of scaled particle theory to the partial molar volumes of some tetradentate N2O2 type Schiff bases in ionic liquid + DMF solutions

860

Application of scanning deep level transient spectroscopy for characterisation of multicrystalline silicon

861

Application of scanning deep level transient spectroscopy for characterisation of multicrystalline silicon

862

Application of Scanning Electron-Acoustic Microscopy to Biological Materials

863

Application of scanning methods to distinguish between entropy and enthalpy driven phase transitions

864

Application of scanning mid-IR-laser microscopy for characterization of semiconductor materials for photovoltaics

865

Application of scanning near-field optical microscopy to thin organic film devices

866

Application of scanning near-field optical microscopy to thin organic film devices

867

Application of scanning probe microscopies to oxide catalysts

868

Application of scanning thermal microscopy for investigation of thermal boundaries in multilayered photonic structures

869

Application of scanning thermal microscopy for investigation of thermal boundaries in multilayered photonic structures

870

Application of scanning tunneling-field emission microscopy for investigations of field electron emission from nanoscale diamond films

871

Application of scanning tunneling-field emission microscopy for investigations of field electron emission from nanoscale diamond films

872

Application of SCB Test and Surface Free Energy Method in Evaluating Crack Resistance of SBS Modified Asphalt Mixes

873

Application of Schauder fixed point theorem to a coupled system of differential equations of fractional order

874

Application of Schlieren Interferometry to Temperature Measurements During Laser Welding of High-Density Polyethylene Films

875

Application of Schmidt hammer relative age dating to Late Pleistocene moraines and rock glaciers in the Western Tatra Mountains, Slovakia

876

Application of Schmidt rebound number for estimating rock strength under specific geological conditions

877

Application of scientific criteria to food allergens of public health importance

878

Application of scientometric methods to chemical research in Iran: Reflections on Iranʹs current science policy

879

Application of SCOR Model in an Oil- producing Company

880

Application of screening tools to detect risk of hospital readmission in elderly patients in Valencian Healthcare System (VHS) (Spain)

881

Application of Screens and Trips in Enhancement of Flow Characteristics in Subsonic Wind Tunnels

882

Application of screw displacement axes to quantify elbow instability

883

Application of SEAFP waste recycling and clearance strategies to ITER

884

Application of seamless vertical profiles for use in the topside electron density modeling Original Research Article

885

Application of seawater to enhance SO2 removal from simulated flue gas through hollow fiber membrane contactor

886

Application of seaweed and salicylic acid on qualitative and qualitative traits of field pumpkin, Cucuorbita pepo L. in Khorramabad, Iran

887

Application of seaweed and salicylic acid on qualitative and qualitative traits of field pumpkin, Cucuorbita pepo L. in Khorramabad, Iran

888

Application of SeaWIFS- and AVHRR-derived data for mesoscale and regional validation of a 3-D high-resolution physical–biological model of the Gulf of St. Lawrence (Canada)

889

Application of SeaWiFS data for studying variability of bio-optical characteristics in the Barents, Black and Caspian Seas

890

Application of SeaWinds scatterometer and TMI-SSM/I rain rates to hurricane analysis and forecasting

891

Application of SECM in tracing of hydrogen peroxide at multicomponent non-noble electrocatalyst films for the oxygen reduction reaction

892

Application of second generation wavelets to blind spherical deconvolution

893

Application of SeDeM Expert system in formulation development of effervescent tablets by direct compression

894

Application of SeDeM Expert system in formulation development of effervescent tablets by direct compression

895

Application of sediment cores in reconstruction of long-term temperature and metal contents at the northern region of the Persian Gulf

896

APPLICATION OF SEDIMENTARY FECAL STANOLS AND STEROLS IN TRACING SEWAGE POLLUTION IN COASTAL WATERS

897

Application of sedimentary-structure interpretation to geoarchaeological investigations in the Colorado River Corridor, Grand Canyon, Arizona, USA

898

Application of Seed Equilibrium Moisture Curves in Agro Physics

899

Application of Seemingly Unrelated Regression (SUR) in Determination of Risk Factors of Fatigue and General Health among the Employees of Petrochemical Companies

900

Application of SEIR Model in COVID-19 and The Effect of Lockdown on Reducing The Number of Active Cases

901

Application of Seismic and Resistivity methods to investigate Amiriyeh (Iran) site geology characterization from seismic Micro-zonation point of view

902

Application of seismic sedimentology to prediction of beach and bar sandbodies in gentle slope of lacustrine basin: A case study of the Lower Cretaceous in Chepaizi area, Junggar Basin, NW China

903

Application of SELDI-TOF-MS to identify serum biomarkers for renal cell carcinoma

904

Application of selected antagonistic strains against Phytophthora cryptogea on gerbera in closed soilless systems with disinfection by slow sand filtration

905

Application of selected geothermometers to Continental Intercalaire thermal water in southern Tunisia

906

Application of selected ion monitoring to the analysis of triacylglycerols in olive oil by high temperature-gas chromatography/mass spectrometry

907

Application of selected partial order tools to analyze fate and toxicity indicators of environmentally hazardous chemicals

908

Application of selective epitaxy for formation of ultra shallow SiGe-based junctions

909

Application of selective F1 decoupled 1H NMR for enantiomer resolution and accurate measurement of enantiomeric excess at low chiral substrate/auxiliary concentration

910

Application of selective non-catalytic reduction of NOx in small-scale combustion systems

911

Application of Selenium Nanoparticles on Sperm Quantity Indicators in Wistar Rat

912

Application of self consistent reaction field theory to thermally induced exothermic reaction in energetic molecules

913

Application of Self Organizing Map and SRTM data to characterize yardangs in the Lut desert, Iran

914

Application of self organizing maps for investigating network latency on a broadcast-based distributed shared memory multiprocessor

915

Application of self-annealing effect to the manufacturing of strips and wires showing high fatigue strength

916

Application of self-deconvolution method to shift-and-add solar imaging

917

Application of Self-Learning to Heating Process Control of Simulated Continuous Annealing Original Research Article

918

Application of self-organising neural networks in robot tracking control

919

Application of self-organizing competitive neural network in fault diagnosis of suck rod pumping system

920

Application of self-organizing maps for assessing soil biological quality

921

Application of self-organizing maps for the classification of chromatographic systems and prediction of values of chromatographic quantities

922

Application of self-organizing maps in analysis of wave soldering process

923

Application of self-organizing maps technique in downscaling GCMs climate change projections for Same, Tanzania

924

Application of self-organizing maps to chemical analysis

925

Application of Self-Oscillation of the Electrical Potential across the Water-Oil-Water Liquid Membrane to Quantitative Analysis of Aluminum Nitrate

926

Application of self-tuning PID control to a reactor of limestone slurry titrated with sulfuric acid

927

Application of SEM Analysis for Designing Strategic Model for Agricultural Sustainable Development (ASD) in Iran

928

Application of SEM to detect the structure of mesocarbon microbeads

929

Application of SEM XRMA data to lake ecosystem modelling

930

Application of SEM XRMA data to lake ecosystem modelling

931

Application of semantic features in face recognition

932

Application of Semantic Statements of Uqūq al-Wālidayn (Disobedience to Parents) from the Perspective of Qur’an and Hadith

933

Application of semantic technology for social network analysis in the sciences

934

Application of semi-active control strategies for seismic protection of buildings with MR dampers

935

Application of semi-analytic method to compute the moments for solution of logistic model

936

Application of semi-automatic metadata generation in libraries: Types, tools, and techniques

937

Application of semiconductor micro- and nanotubes in biology

938

Application of Semiconductor Photocatalysis for Effective Elimination of Organic Contaminants from Sewage

939

Application of semiempirical method (AM1) to the study of tautomeric equilibria in the gas phase for simple compounds containing the amidine group: 4(5)-substituted imidazoles

940

Application of semi-industrial monolithic columns for downstream processing of clotting factor IX

941

Application of semi-parametric single-index two-part regression and parametric two-part regression in estimation of the cost of functional gastrointestinal disorders

942

Application of semipermeable membrane device for assessing toxicity in drinking water

943

Application of semi-permeable membrane dialysis/ion trap mass spectrometry technique to determine polybrominated diphenyl ethers and polychlorinated biphenyls in milk fat Original Research Article

944

Application of semisolid joining—Part 4 glass/metal, plastic/metal, or wood/metal joining

945

Application of Sensitivity Analysis in Forest Road Networks Planning and Assessment

946

Application of sensitivity analysis to a model of Eucalyptus globulus plantation productivity

947

Application of sensitivity analysis to a model of Eucalyptus globulus plantation productivity

948

Application of sensitivity analysis to oil refinery emissions

949

Application of sensitivity analysis to oil refinery emissions

950

Application of sensor arrays based on thin films of conducting polymers for chemical recognition of volatile organic solvents

951

Application of sensory analysis to champagne wine characterisation and discrimination

952

Application of sepiolite to prevent bleeding and blooming for EPDM rubber composition

953

Application of sepiolite–cellulose pastes for the removal of salts from building stones

954

Application of Sepsis-3 Criteria to Korean Patients with Critical Illnesses

955

Application of sepsis-3 criteria to Korean patients with critical illnesses.

956

Application of Sequential Gaussian Conditional Simulation to Underground Mine Design Under Grade Uncertainty

957

Application of sequential injection analysis (SIA) to food analysis

958

Application of sequential injection-monosegmented flow analysis (SI-MSFA) to spectrophotometric determination of sulfide in simulated waters samples

959

Application of sequential injection–square wave voltammetry (SI–SWV) to study the adsorption of atrazine onto a tropical soil sample

960

Application of sequential integration for metabolic engineering of 1,2-propanediol production in yeast

961

Application of sequential Monte Carlo simulation to evaluation of distributions of composite system indices

962

Application of serial transformations in scan-based SOC test for test cost reduction

963

Application of Several Data-Driven Techniques for Rainfall-Runoff Modeling

964

Application of several multipotential step techniques to the study of multicenter molecules at spherical electrodes of any size

965

APPLICATION OF SEWAGE DRY SLUDGE IN CONCRETE MIXTURES

966

Application of sewage sludge compost on highway embankments

967

Application of sewage sludge for cereal production in a Mediterranean environment (Lebanon)

968

Application of sewage sludge in the manufacturing of ceramic tile bodies

969

Application of shakedown maps under variable loads

970

Application of shakedown theory to soil dynamics

971

Application of shakedown theory to soils with non associated flow rules

972

Application of shallow circumferential grooved wheels to creep-feed grinding

973

Application of shannon information theory to a comparison between L- and C-band SIR-C polarimetric data versus incidence angle

974

Application of Shannon wavelet for solving boundary value problems of fractional differential equations

975

Application of shannonʹs entropy to classify emergent behaviors in a simulation of laser dynamics

976

Application of Shape Analysis on 3D Images - MRI of Renal Tumors

977

Application of Shape Analysis on 3D Images - MRI of Renal Tumors

978

Application of shape factor to determine the permeability of perfusive particles

979

Application of shape memory alloy dampers in the seismic control of cable-stayed bridges

980

Application of shape memory alloy TiNi in low thermal expansion copper composites

981

Application of Shape Memory Alloys in Seismic Isolation: A Review

982

Application of Sharafutdinov’s Ray Transform in Integrated Photoelasticity

983

Application of shear induced structure materials for brine flooding in sandstone oil reservoirs

984

Application of shear wave elastography in fine needle aspiration biopsy for thyroid nodule

985

Application of shelf life decision system (SLDS) to marine cultured fish quality

986

Application of Sherman–Morrison matrix inversion formula to damped vibration absorbers attached to multi-degree of freedom systems

987

Application of shielded column liquid chromatography for determination of sulfamonomethoxine, sulfadimethoxine, and their N4-acetyl metabolites in milk

988

Application of shielding boronate affinity chromatography in the study of the glycation pattern of haemoglobin

989

Application of Shock Capturing Method for Free Surface Flow Simulation

990

Application of shock waves to rat skin decreases calcitonin gene-related peptide immunoreactivity in dorsal root ganglion neurons

991

Application of short monolithic columns for fast purification of plasmid DNA

992

Application of short repairs for fatigue life extension

993

Application of short-term bioassay guided chemical analysis for water quality of agricultural land run-off

994

Application of SiC-based power element to high current AC/DC converter system

995

Application of side reactors on ETBE reactive distillation

996

Application of Sigmoid function in the space of univalent functions based on subordination

997

Application of sigmoidal transformations to weakly singular and near-singular boundary element integrals

998

Application of Signal Processing Tools for Fault Diagnosis in Induction MotorsA ReviewPart II

999

Application of signaling protein 14-3-3 and 26 kDa glutathione-S-transferase to serological diagnosis of Schistosomiasis japonica

1000

Application of signed digraphs-based analysis for fault diagnosis of chemical process flowsheets

بازگشت