<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Solid supported palladium(0) nano/microparticle: a ligand-free efficient recyclable heterogeneous catalyst for mono- and β,β-double-Heck reaction
2
Solid supported Pd(0): an efficient recyclable heterogeneous catalyst for chemoselective reduction of nitroarenes
3
Solid supported rhodium(0) nanoparticles: an efficient catalyst for chemo- and regio-selective transfer hydrogenation of nitroarenes to anilines under microwave irradiation
4
Solid supported Ru(0) nanoparticles: an efficient ligand-free heterogeneous catalyst for aerobic oxidation of benzylic and allylic alcohol to carbonyl
5
Solid supported synthesis of structurally diverse dihydropyrido[2,3-d]pyrimidines using microwave irradiation
6
Solid Supports in Enzyme-Linked Immunosorbent Assay and Other SolidPhase Immunoassays
7
Solid surface dependent layering of self-arranged structures with fibril-like assemblies of alpha-synuclein
8
Solid surface mapping by inverse gas chromatography
9
Solid surface room temperature phosphorescence of tetracycline antibiotics
10
Solid surface room temperature phosphorimetry analysis of yohimbine hydrochloride in pharmaceutical formulations
11
Solid targetry at the TESLA Accelerator Installation
12
Solid targetry at the TESLA Accelerator Installation
13
Solid tethered imino-bis-propanediol and quaternary amine functional copolymer brushes for rapid extraction of trace boron Original Research Article
14
Solid tidal friction above a liquid water reservoir as the origin of the south pole hotspot on Enceladus
15
Solid timber beams strengthened with steel plates – Experimental studies
16
Solid transport in a pyrolysis pilot-scale rotary kiln: preliminary results—stationary and dynamic results
17
Solid Trichlorotitanium (IV) Trifluoromethanesulfonate TicL3 (OTf) Catalyzed Highly Efficient Protection of Aldeyhydes as their Acylals at Room Temperature under Solvent-Free Conditions
18
Solid triphenylmethanol: A molecular material that undergoes multiple internal reorientational processes on different timescales
19
Solid T-spline construction from boundary representations for genus-zero geometry
20
Solid tumors after heart transplantation: Lethality of lung cancer
21
Solid tumors associated with multiple endocrine neoplasias
22
Solid tumors in cardiac allograft recipients
23
Solid Tumors of the Lateral Ventricle: Endoscopic Assisted Microsurgical Excision through Transcortical and Transcallosal Approaches
24
Solid tumour growth analysis of necrotic core formation
25
Solid type dye-sensitized solar cell using polysaccharide containing redox electrolyte solution
26
Solid variant of aneurysmal bone cyst with a novel (X;9) translocation
27
Solid waste as renewable source of energy: current and future possibility in Algeria
28
Solid waste characteristics in an operating landfill in a developing country
29
Solid waste characterization and recycling potential for a university campus
30
Solid Waste Characterization in Ethiope East Local Government Area Of Delta State, Abraka, Nigeria
31
Solid Waste Co-Conversion by Hydrothermal Treatment using Natural Zeolite
32
Solid waste collection by the private sector: Households’ perspective—Findings from a study in Dar es Salaam city, Tanzania
33
Solid waste deposits as a significant source of contaminants of emerging concern to the aquatic and terrestrial environments — A developing country case study from Owerri, Nigeria Original Research Article
34
solid waste estimation per capita in equity girls hostel blocks, igbinedion university okada, nigeria
35
Solid waste from aluminum recycling process: characterization and reuse of its economically valuable constituents
36
Solid Waste Landfills as a Source of Green Energy: Case Study of Al Akeeder Landfill
37
Solid waste management and the urban community: A case study in Kuching city
38
Solid Waste Management Baling Scheme Economics Methodology
39
Solid waste management beliefs and practices in rural households towards sustainable development and pro-environmental citizenship
40
Solid waste management in Abuja, Nigeria
41
Solid Waste Management in Commercial City of Bangladesh
42
Solid waste management in Indian Himalayan tourists’ treks: a case study in and around the Valley of Flowers and Hemkund Sahib
43
Solid waste management in Macao: Practices and challenges
44
Solid waste management in New Zealand
45
Solid waste management practices and review of recovery and recycling operations in Turkey
46
Solid Waste Management System Analysis by Multiobjective Mixed Integer Programming Model
47
Solid waste management system for small island developing states
48
Solid waste plasma disposal plant
49
Solid waste plasma gasification: Equilibrium model development and exergy analysis
50
Solid Waste Production and Its Management in Dental Clinics in Gorgan, Northern Iran
51
Solid waste treatment within the framework of life-cycle assessment
52
Solid waste: terminological and long-term environmental risk assessment problems exemplified in a power plant fly ash study
53
Solid Wastes Composition and Generation in Selected Hotels at Aba and Umuahia, Abia State, Nigeria
54
Solid Wastes Generation in Covenant University, Ota, Nigeria: Characterisation and Implication for Sustainable Waste Management
55
Solid wastes generation in India and their recycling potential in building materials
56
Solid wastes integrated management in Rio de Janeiro: input–output analysis
57
Solid, cystic and vanishing tumors of the pancreas
58
Solid, shape recovered “Bulk” nitinol: Part II—Mechanical properties
59
Solid, shape recovered “bulk” Nitinol: Part I—Tension–compression asymmetry
60
Solid/liquid- and vapor-phase interactions between cellulose- and lignin-derived pyrolysis products
61
Solid/liquid- and vapor-phase interactions between cellulose- and lignin-derived pyrolysis products
62
Solid/liquid erosion behavior of gas tungsten arc welded TiNi overlay
63
Solid/liquid interfacial tension as a tool to study stability of lysozyme on adsorption to solid surfaces
64
Solid/liquid Phase Microextraction of Anticancer Drug Cisplatin by Using a Hollow Fiber Reinforced with Multiwalled Carbon Nanotube- Ion Exchange Polyurethane Foam, and Determination by Graphite Furnace Atomic Absorption Spectrometry
65
Solid/liquid separation behavior of alum and polyaluminium chloride coagulation flocs
66
Solid/solid separation by selective agglomeration with agglomerant recovery by thermal desorption
67
Solid/vapour sorption heat transformer: Design and performance
68
Solid¯liquid mass transfer limitation of ferrous iron in the chemical oxidation of FeS2 at high redox potential
69
Solidang, a computer code for the computation of the effective solid angle and correction factors for gamma spectroscopy-based waste assay
70
Solid–aqueous solution interface phenomena at the molecular level
71
Solidarity and Akcja Wyborcza ‘Solidarnoscʹ. An attempt at reviving the legend
72
Solidarity and conflicts in coresidence of three-generational immigrant families from the former Soviet Union
73
Solidarity Day at Unión Fenosa in Spain
74
Solidarity in Indonesian conversation: The discourse marker ya
75
Solidarity in the Time of COVID-19 Pandemic
76
Solidarity through collaborative research
77
Solidarity, justice and health care priorities : Edited by Zbigniew Szawarski and Donald Evans. Health Service Studies 8, Linkimageping University, Linkimageping, Sweden, 1993. 128 pp., U.S.$25.00
78
Solid-assisted melt disintegration (SAMD), a novel technique for metal powder production
79
Solid-bound, proton-driven, fluorescent ‘off–on–off’ switches based on PET (photoinduced electron transfer)
80
Solid-calcified colloid cyst of the third ventricle
81
Solid-CdS and hollow-ZnS porous submicrospheres: Direct preparation by C–S decomposition of thiol via solvothermal processing
82
Solid-contact Hg(II)-selective electrode based on a carbon-epoxy composite containing a new dithiophosphate-based ionophore
83
Solid-contact ion-selective electrode with stable internal electrode
84
Solid-contact ion-selective electrodes for aromatic cations based on π-coordinating soft carriers
85
Solid-contact polymeric membrane electrodes with detection limits in the subnanomolar range
86
Solid-contact polymeric membrane electrodes with detection limits in the subnanomolar range Original Research Article
87
Solid-contact potentiometric polymer membrane microelectrodes for the detection of silver ions at the femtomole level
88
Solid-contact potentiometric polymer membrane microelectrodes for the detection of silver ions at the femtomole level
89
Solid-contact potentiometric sensor for ascorbic acid based on cobalt phthalocyanine nanoparticles as ionophore
90
Solid-electrolyte NASICON thick film CO2 sensor prepared on small-volume ceramic tube substrate
91
Solid-emissive boron–fluorine derivatives with large Stokes shift
92
Solid–extracellular fluid interaction and damage in the mechanical response of rat brain tissue under confined compression
93
Solid–fluid diffuse interface model in cases of extreme deformations
94
Solid–fluid equilibria in natural gas systems
95
Solid–fluid equilibrium for organic molecules: understanding the link between molecular structure and phase diagrams
96
Solid–fluid phase behaviour of linear polyethylene solutions in propane, ethane and ethylene at high pressures
97
Solid–fluid phase equilibria of compositionally complex mixtures: contrast of equilibrium and process treatments
98
Solid–fluid phase transitions under extreme pressures including negative ones
99
Solid–fluid phase transitions under extreme pressures including negative ones
100
Solid-fuel household cook stoves: Characterization of performance and emissions
101
Solid–gas and electrochemical hydrogenation properties of pseudo-binary (Ti,Zr)Ni intermetallic compounds
102
Solid–gas carbonylation of aryloxide rhodium(I) complexes: stepwise reaction forming Vaska-type complexes
103
Solid–gas reactions of complex oxides inside an environmental high-resolution transmission electron microscope
104
Solid-hydroxide-proton conductors in new electrochemical cells “hydrogenated metal–protonics”
105
Solidification analysis of a single particle with encapsulated phase change materials
106
Solidification and abrasion wear of white cast irons alloyed with 20% carbide forming elements
107
Solidification and casting/mould interfacial heat transfer characteristics of aluminum matrix composites
108
Solidification and compositional convection of a ternary alloy
109
Solidification and computational analysis of o-nitroaniline–α-naphthol eutectic system
110
Solidification and control of a liquid metal column
111
Solidification and convection of a ternary solution cooled from the side
112
Solidification and grain refinement in Ti45Al2Mn2Nb1B
113
Solidification and grain refinement in Ti45Al2Mn2Nb1B subjected to fast cooling
114
Solidification and high-temperature phase equilibria in the Fe–Al-rich part of the Fe–Al–Nb system
115
Solidification and melting behaviors and characteristics of molten salt in cold filling pipe
116
Solidification and melting of gallium and mercury in porous glasses as studied by NMR and acoustic techniques
117
Solidification and microstructural characterisation of iron–chromium based hardfaced coatings deposited by SMAW and electric arc spraying
118
Solidification and modeling of cast iron—A short history of the defining moments
119
Solidification and recycling of incinerator bottom ash through the addition of colloidal silica (SiO2) solution
120
Solidification and Stabilization of Asbestos Brake Lining Dust Using Polymeric Resins
121
Solidification and stabilization of Pb, Zn, Cd and Cu in tailing wastes using cement and fly ash
122
Solidification and Thermal Performance Analysis of the Low Carbon Steel During the Continuous Casting Process
123
Solidification behavior of a Ni-based single crystal CMSX-4 superalloy solidified by downward directional solidification process
124
Solidification behavior of Al–20.6%Cu alloy under AC magnetic field
125
Solidification behavior of cast TiB2 particulate reinforced Mg composites
126
Solidification behavior of PLLA/nHA nanocomposites
127
Solidification behavior of Sn–9Zn–xAg lead-free solder alloys
128
Solidification behavior of Ti5Si3 whiskers in TiAl alloys
129
Solidification behavior of Ti5Si3 whiskers in TiAl alloys
130
Solidification behavior of undercooled Cu70Ni30 alloy melt
131
Solidification behavior of undercooled Cu70Ni30 alloy melt
132
Solidification behavior of γ′-Ni3Al-containing alloys in the Ni–Al–O system Original Research Article
133
Solidification behavior, glass forming ability and thermal characteristics of soft magnetic Fe–Co–B–Si–Nb–Cu bulk amorphous alloys
134
Solidification behavior, microstructure and tensile properties of ZK60-Er magnesium alloys
135
Solidification behaviour and microstructural correlations in magnetocaloric Gd–Si–Ge–Nb alloys
136
Solidification behaviour and phase formation during pre-placed laser cladding of Ti45Nb on mild steel
137
Solidification behaviour of AZ91D alloy under intensive forced convection in the RDC process
138
Solidification behaviour of AZ91D alloy under intensive forced convection in the RDC process Original Research Article
139
Solidification behaviour of Sn droplets embedded in an icosahedral Al-Cu-Fe matrix
140
Solidification behaviour of Sn droplets embedded in an icosahedral Al-Cu-Fe matrix
141
Solidification behaviour of TiAl-based alloys studied by directional solidification technique
142
Solidification behaviour of undercooled Co–Cu alloys showing a metastable miscibility gap
143
Solidification behaviour of undercooled Co–Cu alloys showing a metastable miscibility gap
144
Solidification behaviour under intensive forced convection
145
Solidification behaviour, microstructure and mechanical properties of high Fe-containing Al–Si–V alloys
146
Solidification characteristics of polymer solution during polyvinylidene fluoride membrane preparation by nonsolvent-induced phase separation
147
Solidification characteristics of rising immiscible oil droplets in coolant
148
Solidification characteristics of Tb0.27Dy0.73Fex (x = 1.8, 1.95) alloys during the directional solidification
149
Solidification characterization of a new rapidly solidified Ni–Cr–Co based superalloy
150
Solidification contact angles of molten droplets deposited on solid surfaces
151
Solidification cooling rate and as-cast textures of low-carbon steel strips
152
Solidification cracking of superalloy single- and bi-crystals Original Research Article
153
Solidification effects on sill formation: An experimental approach
154
Solidification from undercooled melts
155
Solidification from undercooled melts
156
Solidification in remelting processes
157
Solidification inside a sphere—an experimental study
158
Solidification interface morphology pattern in the undercooled Co–24.0 at.% Sn eutectic melt Original Research Article
159
Solidification mechanism of allophane by hydrothermal reaction
160
Solidification Mechanism of the Sediment Formed by Particle Settling — Analysis of the Final State of the Sediment
161
Solidification mechanism of the sediment formed by particle settling – Analysis of the formation of the solidified layer
162
Solidification microstructure affecting ductility in semi-solid-cast products
163
Solidification microstructure and dynamics of metastable phase transformation in undercooled liquid Cu–Fe alloys Original Research Article
164
Solidification microstructure formation in the Al-rich Al–La–Ni system
165
Solidification microstructure formation in the Al-rich Al–La–Ni system
166
Solidification microstructures and mechanical properties of high-vanadium Fe–C–V and Fe–C–V–Si alloys
167
Solidification microstructures and solid-state parallels: Recent developments, future directions Original Research Article
168
Solidification microstructures in the rapidly solidified powder of high alloyed V–Cr tool steel
169
Solidification microstructures: recent developments, future directions Original Research Article
170
Solidification Modeling and Dendrite Structure Analysis in a Horizontal Continuously Cast Brass Billet
171
Solidification modeling in continuous casting by finite point method
172
Solidification modelling with a control volume method on domains subjected to viscoplastic deformation
173
Solidification modes and microstructure of Fe–Cr alloys solidified at different undercoolings
174
Solidification modes and microstructure of Fe–Cr alloys solidified at different undercoolings
175
Solidification observations and sliding wear behavior of vacuum arc melting processed Ni–Al–TiC composites
176
Solidification observations of vacuum arc melting processed Fe–Al–TiC composites: TiC precipitation mechanisms
177
Solidification of a 2-D semitransparent medium using the lattice Boltzmann method and the finite volume method
178
Solidification of a binary alloy: Finite-element, single-domain simulation and new benchmark solutions
179
Solidification of a binary mixture in a shear flow
180
Solidification of a finite slab with convective cooling and shrinkage
181
Solidification of a PEG 1500-epoxy nanocomposite around a horizontal pipe
182
SOLIDIFICATION OF A PURE METAL WITH FINITE THERMAL CAPACITANCE ON A SINUSOIDAL MOLD SURFACE
183
Solidification of a supercooled liquid in stagnation-point flow
184
Solidification of a ternary alloy liquid layer on a substrate subject to self-consistent melting
185
Solidification of a ternary melt from a cooled boundary, or nonlinear dynamics of mushy layers
186
Solidification of Al2O3–YAG eutectic composites with off-metastable eutectic composition from undercooled melt produced by melting Al2O3–YAP eutectics
187
Solidification of Al–50 at.%Si alloy in a drop tube
188
Solidification of Al–50 at.%Si alloy in a drop tube
189
Solidification of Al–50 at.%Si alloy in a drop tube
190
Solidification of aqueous ammonium chloride in a rectangular cell under constant wall temperature - an experimental study
191
Solidification of AZ31 magnesium alloy plate in a horizontal continuous casting process
192
Solidification of borate radioactive resins using sulfoaluminate cement blending with zeolite
193
Solidification of coal fly ash using hydrothermal processing method
194
Solidification of electroplating sludge using alkali-activated pulverized fuel ash as cementitious binder
195
Solidification of high-Cr white cast iron–WC particle reinforced composites
196
Solidification of highly undercooled Si and Si–Ge melts
197
Solidification of high-refractory ruthenium-containing superalloys Original Research Article
198
Solidification of hydatid cyst fluid with an injectable chitosan/carboxymethylcellulose/β-glycerophosphate hydrogel for effective control of spillage during aspiration of hydatid cysts
199
Solidification of hydatid cyst fluid with an injectable chitosan/carboxymethylcellulose/β-glycerophosphate hydrogel for effective control of spillage during aspiration of hydatid cysts
200
Solidification of Hydrogen Clusters Including a Foreign Molecule
201
Solidification of liquid electrolyte with imidazole polymers for quasi-solid-state dye-sensitized solar cells
202
Solidification of metal foams Original Research Article
203
Solidification of metallic tin in dispersed phase
204
Solidification of Nano-Enhanced Phase Change Material (NEPCM) in an Enclosure
205
Solidification of nanostructured lipid carriers (NLCs) onto pellets by fluid-bed coating: Preparation, in vitro characterization and bioavailability in dogs
206
Solidification of PCM around a curved tube
207
Solidification of pcm inside a spherical capsule
208
Solidification of phase change material on vertical cylindrical surface in holdup air bubbles
209
Solidification of Precirol® by the expansion of a supercritical fluid saturated melt: From the thermodynamic balance towards the crystallization aspect
210
Solidification of Sr-containing stripping solutions in titanate ceramics
211
Solidification of superalloy in a SiO2–ZrO2–B2O3 coating mould
212
Solidification of Tank Bottom Sludge
213
Solidification of undercooled eutectic alloys containing a third element Original Research Article
214
Solidification of undercooled peritectic Fe-Ge alloy
215
Solidification paths and eutectic intermetallic phases in Mg-Al-Ca ternary alloys
216
Solidification paths and eutectic intermetallic phases in Mg–Al–Ca ternary alloys Original Research Article
217
Solidification paths for an icosahedral quasicrystalline phase in cast Al62Cu25.5Fe12.5 and Al55Cu25.5Fe12.5Be7 alloys
218
Solidification paths of multicomponent monotectic aluminum alloys Original Research Article
219
Solidification phases and liquidus surface of the Al-Ni-Ru system above 50 at.% aluminium
220
Solidification phases and their evolution during homogenization of a DC cast Al–8.35Zn–2.5Mg–2.25Cu alloy
221
Solidification phenomena in Ge films upon nano- and pico-second laser pulse melting
222
Solidification processing of alloys in the pseudo-binary PbTe–Sb2Te3 system Original Research Article
223
Solidification processing of high temperature intermetallic eutectic-based alloys
224
Solidification processing of high temperature intermetallic eutectic-based alloys
225
Solidification Properties of CaO-SiO2-TiO2 Based Mold Fluxes Original Research Article
226
Solidification sequence of the icosahedral quasicrystal forming Al–Cu–Fe alloys
227
Solidification sequence of the icosahedral quasicrystal forming Al–Cu–Fe alloys
228
Solidification shrinkage of Ni–Cr alloys
229
Solidification Simulation of Single Crystal Investment Castings
230
Solidification structure and crystallographic texture of strip casting 3 wt.% Si non-oriented silicon steel
231
Solidification structure formation in undercooled Fe–Ni alloy Original Research Article
232
Solidification Structure Formation of Undercooled Single Phase Alloys
233
Solidification structure in pure zirconia liquid molten phase
234
Solidification structure of C2.08Cr25.43Si1.19Mn0.43Fe70.87 powders fabricated by high pressure gas atomization
235
Solidification structure of CaO–SiO2–MgO–Al2O3 (–CaF2) systems and computational phase equilibria: Crystallization of MgAl2O4 spinel
236
Solidification structure of CaO–SiO2–MgO–Al2O3 (–CaF2) systems and computational phase equilibria: Crystallization of MgAl2O4 spinel
237
Solidification structure of undercooled Ni54.6Pd45.4 alloy
238
Solidification Structure Refining of 430 Ferrite Stainless Steel With TiN Nucleation Original Research Article
239
Solidification structures and phase selection of iron-bearing eutectic particles in a DC-cast AA5182 alloy Original Research Article
240
Solidification temperature of silicon surface layer melted by pulsed laser irradiation
241
Solidification using smoothed particle hydrodynamics
242
Solidification velocity of undercooled Ni–Cu alloys Original Research Article
243
Solidification with a quasiequilibrium two-phase zone Original Research Article
244
Solidification with water as a treatment method for air pollution control residues
245
Solidification, solution treatment and age hardening of a Mg-1.6 wt.% Ca-3.2 wt.% Zn alloy
246
Solidification, solution treatment and age hardening of a Mg–1.6 wt.% Ca–3.2 wt.% Zn alloy Original Research Article
247
Solidification/stabilisation of arsenic bearing fly ash from the metallurgical industry. Immobilisation mechanism of arsenic
248
Solidification/stabilisation of arsenic-containing waste: Leach tests and behaviour of arsenic in the leachate
249
Solidification/stabilization of Cr(VI) with cement: Leachability and XRD analyses
250
Solidification/Stabilization of Fe(II)-Treated Cr(VI)-Contaminated Soil
251
Solidification/Stabilization of Hazardous Wastes Containing Metals and Organic Contaminants
252
Solidification/Stabilization of Heavy Metals from Air Heater Washing Wastewater Treatment in Thermal Power Plants
253
Solidification/stabilization of Ni(II) by various cement pastes
254
Solidification/stabilization of toxic metal wastes using coke and coal combustion by-products
255
Solidification/stabilization Treatment of Spent Catalyst (V2O5) from a Sulfuric Acid Plant using Ordinary Portland Cement (OPC) and an Additive
256
Solidification–microprestress–microplane (SMM) theory for concrete at early age: Theory, validation and application
257
Solidificationoflow-level-radioactiveresinsinASC-zeoliteblendsOriginalResearchArticle
258
Solidified floating organic drop microextraction and spectrophotometric determination of vanadium in water samples
259
Solidified floating organic drop microextraction combined with ETV-ICP-MS for the determination of trace heavy metals in environmental water samples
260
Solidified floating organic drop microextraction for speciation of selenium and its distribution in selenium-rich tea leaves and tea infusion by electrothermal vapourisation inductively coupled plasma mass spectrometry
261
Solidified ionic liquid as crystalline sensing element of the bromide selective electrode
262
Solidified liquid layer model makes quartz crystal microbalance a convenient molecular ruler
263
Solidified Reverse Micellar Solution (SRMS)-Based Indomethacin Sustained-Release Tablets: Formulation and In vitro Evaluation
264
Solidifying liquid electrolytes with fluorine polymer and silica nanoparticles for quasi-solid dye-sensitized solar cells
265
Solidity is an imperfect state Original Research Article
266
Solid-like components in carbohydrate gels probed by NMR spectroscopy
267
Solid–liquid and liquid–liquid equilibria for 1,3,5-trioxane, or 1,4,7,10,13,16-hexaoxacyclooctadecane + selected n-alkane mixtures: Analysis in terms of DISQUAC
268
Solid–liquid distribution of selected concrete admixtures in hardened cement pastes
269
Solid–liquid equilibria and binodals of liquid–liquid equilibria for the quaternary systems aqueous solution+binary fatty acids
270
Solid–liquid equilibria and purity determination for binary n-alkane + naphthalene systems
271
Solid–liquid equilibria and the physical properties of binary systems of diphenyl carbonate, dimethyl carbonate, methyl phenyl carbonate, anisole, methanol and phenol
272
Solid–liquid equilibria based on an equation of state for chain fluids
273
Solid–liquid equilibria for binary and ternary systems with the Cubic-Plus-Association (CPA) equation of state
274
Solid–liquid equilibria for binary mixtures of N-phenylacetamide with 4-aminoacetophenone, 3-hydroxyacetophenone and 4-hydroxyacetophenone
275
Solid–liquid equilibria for systems containing 1-butyl-3-methylimidazolium chloride
276
Solid-liquid equilibria for systems containing long-chain 1-alkanols I. Experimental data for 1-dodecanol, 1-tetradecanol, 1-hexadecanol, 1-octadecanol or 1-icosanolbenzene or toluene mixtures. Characterization in terms of DISQUAC
277
Solid-liquid equilibria for systems containing long-chain 1-alkanols III. Experimental data for 1-tetradecanol, 1-hexadecanol, 1-octadecanol or 1-icosanol + 1-butanol, 1-hexanol, 1-octanol or 1-decanol mixtures. Characterization in terms of DISQUAC
278
Solid-liquid equilibria for systems containing long-chain 1-alkanols. II. Experimental data for 1-dodecanol, 1-tetradecanol, 1-hexadecanol, 1-octadecanol or 1-eicosanol + CCl4 or + cyclohexane mixtures. Characterization in terms of DISQUAC
279
Solid-liquid equilibria in binary mixtures of organic compounds
280
Solid–liquid equilibria in l-leucine + l-valine + water
281
Solid–liquid equilibria in l-leucine + l-valine + water
282
Solid–liquid equilibria in the acetic acid–propanoic acid and propanoic acid–trifluoroacetic acid systems
283
Solid–liquid equilibria in the quasi-binary thallium(I) selenide–tin(IV) selenide system
284
Solid–liquid equilibria in the quasi-binary thallium(I) selenide–tin(IV) selenide system
285
Solid–liquid equilibria in the quasi-binary thallium(I) telluride–indium(III) telluride system
286
Solid–liquid equilibria in the quasi-binary thallium(I) telluride–indium(III) telluride system
287
Solid–liquid equilibria in the quaternary system K+, Fe2+, Fe3+/Cl−–H2O at 288.15 K
288
Solid–liquid equilibria in the quaternary system NaCl–FeCl2–FeCl3–H2O
289
Solid–liquid equilibria in the quinary system LiCl–KCl–RbCl–MgCl2–H2O at T = 323 K
290
Solid–liquid equilibria in the ternary system NaBO2–NaOH–H2O thermal behavior of double salts
291
Solid–liquid equilibria measurements of the carbon dioxide + 2,3,3,3-tetrafluoroprop-1-ene and carbon dioxide + trans-1,3,3,3-tetrafluoropropene mixtures
292
Solid–liquid equilibria of acenaphthene with o-, m-, or p-dichlorobenzene
293
Solid–liquid equilibria of closely boiling compounds of 4-methoxyphenol and catechol with p-cresol
294
Solid–liquid equilibria of long chain n-alkanes (C18–C28) in N,N-dimethylacetamide
295
Solid–liquid equilibria of mixtures containing tert-butanol, m-chlorophenol, and p-chlorophenol and development of adductive crystallization processes
296
Solid–liquid equilibria of systems containing pyrene and long chain normal-alkanes
297
Solid–liquid equilibria of the ternary system m-nitrobenzoic acid + p-nitrobenzoic acid + acetone
298
Solid–liquid equilibria of three binary systems of anthracene with 2-phenylimidazole, 4,5-diphenylimidazole and 2,4,5-triphenylimidazole
299
Solid–liquid equilibria of three binary systems: {1-Ethyl-3-methylimidazolium hexafluorophosphate + 2-phenylimidazole, or 4,5-diphenylimidazole or 2,4,5-triphenylimidazole}
300
Solid–liquid equilibria predictions for the dissolution of brown coal in ionic liquids using a continuum solvation model
301
Solid–liquid equilibria under high pressure of pure fatty acid methyl esters
302
Solid–liquid equilibrium (SLE) of ternary system 3-nitrophthalic acid + 4-nitrophthalic acid + 1,4-dioxane at (283.15, 293.15, 303.15, 313.15 and 323.15) K
303
Solid–liquid equilibrium and mixture properties for the binary systems of Alamine 336 with decane, dodecane, and 1-dodecanol
304
Solid–liquid equilibrium and thermochemical properties of organic eutectic in a monotectic system
305
Solid–liquid equilibrium and thermochemical studies of organic analogue of metal–nonmetal system: Succinonitrile–pentachloronitrobenzene
306
Solid–liquid equilibrium and thermodynamic of 2,5-thiophenedicarboxylic acid in different organic solvents
307
Solid–liquid equilibrium curve of calcium in 6 mol/L ammonium nitrate solution
308
Solid–liquid equilibrium data for the binary system methacrylic acid + methanol in the high methacrylic acid concentration range
309
Solid–liquid equilibrium diagrams of common ion binary salt hydrate mixtures involving nitrates and chlorides of magnesium, cobalt, nickel, manganese, and iron(III)
310
Solid–liquid equilibrium for non-hydrostatic stress Original Research Article
311
Solid–liquid equilibrium in ternary mixtures of ethyl laurate, ethyl palmitate and ethyl myristate
312
Solid–liquid equilibrium in ternary mixtures of ethyl laurate, ethyl palmitate and ethyl stearate
313
Solid–liquid equilibrium in ternary mixtures of ethyl oleate, ethyl laurate and ethyl palmitate
314
Solid–liquid equilibrium in the acetic acid–cyclohexane and acetic acid–trichloroacetic acid systems
315
Solid–liquid equilibrium in the aqueous system containing the chlorides of lithium, rubidium and magnesium at 323 K
316
Solid–liquid equilibrium of 1-hydroxyethane-1,1-diphosphonic acid in different solvents
317
Solid–liquid equilibrium of binary and ternary mixtures containing ethyl oleate, ethyl myristate and ethyl stearate
318
Solid–liquid equilibrium of dicyandiamide in different solvents
319
Solid–liquid equilibrium of K2SO4 in solvent mixtures at different temperatures
320
Solid–liquid equilibrium of quaternary system Cd2+, K+, Na+//SO42−-H2O at 298 K
321
Solid–liquid equilibrium of some polycyclic aromatic hydrocarbons in wash oil
322
Solid–liquid equilibrium of sulbactam in pure solvents and binary solvent mixtures
323
Solid–liquid equilibrium of ternary system sodium 1-naphthalenesulfonate + sodium 2-naphthalenesulfonate + water at (283.15, 303.15 and 323.15) K
324
Solid-liquid equilibrium of the GaInGaSb system and artificial neural network prediction
325
Solid-liquid equilibrium of the GaInGaSb system and artificial neural network prediction
326
Solid–liquid equilibrium of α-lactose in ethanol/water
327
Solid–liquid equilibrium prediction for binary mixtures of Ar, O2, N2, Kr, Xe, and CH4 using the LJ-SLV-EoS
328
Solid–liquid equilibrium, excess molar volume, and deviations in the molar refractivity for the binary and ternary mixtures of Alamine 304-1 with 1-octanol, 2-octanol, and 1-decanol
329
Solid–liquid equilibrium, thermal, crystallization and microstructural studies of organic monotectic alloy
330
Solid–liquid expression from denaturated plant tissue: Filtration–consolidation behaviour Original Research Article
331
Solid–liquid expression of cellular materials enhanced by pulsed electric field
332
Solid–liquid extraction and cation-exchange solid-phase extraction using a mixed-mode polymeric sorbent of Datura and related alkaloids
333
Solid–liquid extraction from plants — experimental kinetics and modelling
334
Solid–liquid extraction of alkali metals and organic compounds by leaching of food industry residues
335
Solid–liquid extraction of caffeine from tea waste using battery type extractor: Process optimization Original Research Article
336
Solid–liquid extraction of copper from slurried samples using high intensity probe sonication for electrothermal atomic absorption spectrometry
337
Solid-liquid extraction of Gd(III) and separation possibilities of rare earths from phosphoric acid solutions using Tulsion CH-93 and Tulsion CH-90 resins
338
Solid–liquid extraction of ω-amino acids using ditopic receptors
339
Solid–liquid hydrodynamics in a slim hole drilling annulus
340
Solid–liquid interactions: The key to microstructural evolution in ceramics
341
Solid–liquid interface energy of silicon Original Research Article
342
Solid–liquid interface morphology and crystal growth of NiMnGa magnetic shape memory alloys
343
Solid–liquid interface morphology and crystal growth of NiMnGa magnetic shape memory alloys Original Research Article
344
Solid–liquid interfacial energy for solid succinonitrile in equilibrium with succinonitrile dichlorobenzene eutectic liquid
345
Solid–liquid interfacial energy of camphene
346
Solid–liquid interfacial energy of camphene
347
Solid–liquid interfacial energy of solid aminomethylpropanediol solution in equilibrium with aminomethylpropanediol–neopentylglycol–D camphor liquid
348
Solid–liquid interfacial energy of the eutectoid β phase in the Al–Zn eutectic system
349
Solid–liquid interfacial energy of the eutectoid β phase in the Al–Zn eutectic system
350
Solid-liquid magnetic separation using bulk superconducting magnets
351
Solid-Liquid Mass Transfer and Hydrodynamics in the Hydrogenation of 4-Nitrobenzoic Acid
352
Solid–liquid mass transfer in a gas–liquid–solid three-phase reversed flow jet loop reactor
353
Solid–liquid mass transfers in an Airlift Reactor incorporating alginate beads for the application as a bioartificial liver
354
Solid–liquid metastable equilibria in the quaternary system (NaCl–KCl–CaCl2–H2O) at 288.15 K
355
Solid–liquid metastable equilibria in the quaternary system Li2SO4 + MgSO4 + Na2SO4 + H2O at T = 263.15 K
356
Solid–liquid phase diagram of the two Ionic Liquids EMIMCl and BMIMCl
357
Solid–liquid phase diagram of the water octamer
358
Solid–liquid phase diagrams of binary salt hydrate mixtures involving magnesium nitrate and acetate, magnesium and aluminum nitrates, ammonium alum and sulfate, and ammonium alum and aluminum sulfate
359
Solid–liquid phase equilibria for mixtures containing diatomic Lennard–Jones molecules
360
Solid–liquid phase equilibria in binary (1-octanol + n-alkane) mixtures under high-pressure: Part 2. (1-Octanol + n-octane, n-dodecane) systems
361
Solid-liquid phase equilibria in binary (benzene, cyclohexane + n-tetradecane, n-hexadecane) systems at temperatures 230–323 K and pressures up to 120 MPa
362
Solid–liquid phase equilibria in the aqueous ternary system Li2SO4 + LiBO2 + H2O at T = 288.15 and 298.15 K
363
Solid–liquid phase equilibria in the system K2SO4–MgSO4–H2O at 318 K
364
Solid–liquid phase equilibria in the system K2SO4–MnSO4–H2O at 298 K and 313 K
365
Solid-liquid phase equilibria in the system water + methanol + MgSO4·7H2O + MnSO4·4H2O
366
Solid–liquid phase equilibria in the systems K2SO4–MSO4–H2O (M = Co, Ni, Cu) from ambient to enhanced temperatures
367
Solid–liquid phase equilibria of binary indole mixtures with some aromatic compounds using a solid–liquid–vapor equation-of-state
368
Solid–liquid phase equilibrium and phase diagram for ternary 3-nitrophthalic acid–4-nitrophthalic acid–water system at 283.15 K and 333.15 K
369
Solid–liquid phase equilibrium and phase diagram for ternary o-nitrobenzoic acid–p-nitrobenzoic acid–acetone system at 283.15 K and 313.15 K
370
Solid–liquid phase equilibrium for the ternary system urea phosphate + ammonium dihydrogen phosphate + water at 25 and 55 °C
371
Solid–liquid phase equilibrium in the systems of LiBr–H2O and LiCl–H2O
372
Solid–liquid phase equilibrium of 9-fluorenone and several polynuclear aromatic hydrocarbons
373
Solid–liquid phase equilibrium of glyphosate in selected solvents
374
Solid–liquid phase equilibrium study of binary mixtures of n-octadecane with capric, and lauric acid as phase change materials (PCMs)
375
Solid–liquid phase transition of nanofluids
376
Solid-liquid phase transitions in Lennard-Jones systems
377
SOLID-LIQUID SEPARATION AFTER LIQUID-LIQUID EXTRACTION USING alpha-BENZILMONOXIME-MOLTEN BENZOPHENONE FOR PRECONCENTRATION AND SELECTIVE SPECTROPHOTOMETRIC DETERMINATION OF PALLADIUM
378
Solid–liquid separation by sonochemistry: A new approach for the separation of mineral suspensions
379
Solid–liquid separation by sonochemistry: A new approach for the separation of mineral suspensions
380
Solid–liquid separation equipment selection and modelling
381
Solid-liquid separation in suspension atomization
382
Solid-liquid Separation of Activated Sludge by Flotation Using Microporous Ceramic Diffuser
383
Solid–liquid separation of faecal sludge using drying beds in Ghana: Implications for nutrient recycling in urban agriculture
384
Solid–liquid separation of livestock slurry: efficiency and cost
385
Solid-Liquid Separation Systems IV
386
Solid–liquid transitions in homogenous ovalene, hexabenzocoronene and circumcoronene clusters: A molecular dynamics study
387
Solid–liquid transitions in the rheology of a structured yeast extract paste, Marmite™ Original Research Article
388
Solid–liquid transport in a modified co-rotating twin-screw extruder—dynamic simulator and experimental validations
389
Solid–liquid–gas equilibrium of the naphthalene–biphenyl–CO2 system: Measurement and modeling
390
Solid–liquid–solid (SLS) growth of coaxial nanocables: silicon carbide sheathed with silicon oxide
391
Solid–liquid–solid growth mechanism of single-wall carbon nanotubes Original Research Article
392
Solid–liquid–solid process for forming free-standing gold nanowhisker superlattice by interfering femtosecond laser irradiation
393
Solid–liquid–vapor phases of water and water–carbon dioxide mixtures using a simple analytical equation of state
394
Solid-matrix luminescence analysis: photophysics, physicochemical interactions and applications Review Article
395
Solid-matrix luminescence in glucose and trehalose glasses with heavy-atom salts
396
Solid-matrix luminescence of heterocyclic aromatic amines in several new sugar-glass systems
397
Solid-medium-integrated impedimetric biosensor for real-time monitoring of microorganisms
398
Solid-on-solid model of overlayer-induced faceting
399
Solid-oxide fuel cell operated on in situ catalytic decomposition products of liquid hydrazine
400
Solid-Oxide-Fuel-Cell Performance and Durability: Resolution of the Effects of Power-Conditioning Systems and Application Loads
401
Solid-particle erosion and strength degradation of Si3N4/BN fibrous monoliths
402
Solid-particle erosion behavior of high-performance thermoplastic polymers
403
Solid-particle erosion of a geopolymer containing fly ash and blast-furnace slag
404
Solid-particle erosion of directionally solidified Al2O3–ZrO2 (Y2O3) eutectics
405
Solidparticleeffectsonheattransferinamulti-layeredmoltenpoolwithgasinjectionOriginalResearchArticle
406
Solid-phase access to polyhydroxypyrrolizidines by 1,3-dipolar cycloaddition of (S)-3-alkoxypyrroline N-oxide to maleate and crotonate derivatives
407
Solid-phase aldol condensations mediated by zinc acetate and 2,2′-bipyridine under weakly basic conditions
408
Solid-phase analogue synthesis of caspase-3 inhibitors via palladium-catalyzed amination of 3-bromopyrazinones
409
Solid-phase analysis method for (S)-[18F]fluorocarazolol and its metabolites
410
Solid-phase analytical derivatization of alkylphenols in fish bile for gas chromatography–mass spectrometry analysis
411
Solid-phase approach to the synthesis of cyclen scaffolds from cyclotetrapeptides
412
Solid-phase approach towards the synthesis of functionalized imidazo[1,2-b]pyrazol-2-ones
413
Solid-phase approaches toward cyclic oligomers
414
Solid-phase based synthesis of biologically promising triazolyl aminoacyl (peptidyl) penicillins
415
Solid-phase binding assays of peptides using EGFP-Src SH2 domain fusion protein and biotinylated Src SH2 domain
416
Solid-phase bioassays and soil microbial activities to evaluate PAH-spiked soil ecotoxicity after a long-term bioremediation process simulating landfarming Original Research Article
417
Solid-phase capture and release of arginine peptides by selective tagging and boronate affinity chromatography
418
Solid-phase carbohydrate synthesis via on-bead protecting group chemistry
419
Solid-phase C–C and C–O bond forming reactions using ‘Traceless’ π-arene–chromium linkers
420
Solid-phase chemical tools for glycobiology
421
Solid-phase clean-up in the liquid chromatographic determination of polycyclic aromatic hydrocarbons in edible oils
422
Solid-phase combinatorial approach for the optimization of soluble epoxide hydrolase inhibitors
423
Solid-phase combinatorial synthesis of 1,4-benzoxazin-3(4H)-one and 1,4-benzothiazin-3(4H)-one derivatives
424
Solid-phase combinatorial synthesis of 5-arylalkylidene rhodanine
425
Solid-phase combinatorial synthesis of benzothiazole and 2,3-dihydro-[1,5]-benzothiazepine derivatives
426
Solid-phase combinatorial synthesis of benzothiazoles, benzimidazoles, and benzoxazoles using a traceless linker
427
Solid-phase combinatorial synthesis of polyamine derivatives using aminoalcohol building blocks
428
Solid-phase construction: high efficiency dendrimer synthesis using AB3 isocyanate-type monomers
429
Solid-phase control on the mobility of potentially toxic elements in an abandoned lead/zinc mine tailings impoundment, Taxco, Mexico
430
Solid-phase controls on lead partitioning in laboratory bioleaching solutions
431
Solid-phase cross-coupling reaction of aryl(fluoro)silanes with 4-iodobenzoic acid
432
Solid-phase crystallization and dopant activation of amorphous silicon films by pulsed rapid thermal annealing
433
Solid-phase crystallization kinetics and grain structure during thermal annealing of a-Si:H grown by chemical vapor deposition
434
Solid-phase crystallization of amorphous Si films on glass and Si wafer Original Research Article
435
Solid-phase crystallization of amorphous silicon on ZnO:Al for thin-film solar cells
436
Solid-phase de novo synthesis of a (±)-2-deoxy-glycoside
437
Solid-Phase Decarburization of High-Carbon Ferromanganese Powders by Microwave Heating Original Research Article
438
Solid-phase DNA binding detection by EPR spectroscopy
439
Solid-phase domino syntheses of functionalized tetronates with Ph3PCCO
440
Solid-phase dynamic extraction for the enrichment of polar volatile organic compounds from water
441
Solid-phase effects on the performance of a centrifugal slurry pump using computational fluid dynamics
442
Solid-phase enzyme modification via affinity chromatography
443
Solid-phase epitaxial regrowth of a shallow amorphised Si layer studied by X-ray and medium energy ion scattering
444
Solid-phase epitaxy of CaSi2 on Si(1 1 1) and the Schottky-barrier height of CaSi2/Si(1 1 1)
445
Solid-phase extraction (SPE) of the fluorescence tracers uranine and sulphorhodamine B
446
Solid-phase extraction and amperometric determination of nitrite with polypyrrole nanowire modified electrodes
447
Solid-phase extraction and capillary electrophoresis determination of phenols from soil after alkaline CuO oxidation Original Research Article
448
Solid-phase extraction and determination of trace amount of some metal ions on Duolite XAD 761 modified with a new Schiff base as chelating agent in some food samples
449
Solid-phase extraction and gas chromatographic analysis of phenolic compounds in virgin olive oil
450
Solid-phase extraction and high-performance liquid chromatographic separation of pigments of red wines
451
Solid-Phase Extraction and High-Performance Liquid Chromatography Applied to the Determination of Quinapril and Its Metabolite Quinaprilat in Urine
452
Solid-phase extraction and HPLC determination of Ochratoxin A in cereals products on Chilean market
453
Solid-phase extraction and HPLC determination of patulin in apple juice concentrate
454
Solid-phase extraction and liquid chromatographic quantitation of quinfamide in biological samples
455
Solid-phase extraction and liquid chromatography/tandem mass spectrometry assay for the determination of pitavastatin in human plasma and urine for application to Phase I clinical pharmacokinetic studies
456
Solid-phase extraction and liquid chromatography–mass spectrometry for the determination of free fatty acids in shellfish
457
Solid-phase extraction and preconcentration of cadmium(II) in aqueous solution with Cd(II)imprinted resin (poly-Cd(II)-DAAB-VP) packed columns
458
Solid-phase extraction and preconcentration of cadmium(II) in aqueous solution with Cd(II)-imprinted resin (poly-Cd(II)-DAAB-VP) packed columns Original Research Article
459
Solid-phase extraction and sample stacking–capillary electrophoresis for the determination of quaternary ammonium herbicides in drinking water
460
Solid-phase extraction and sample stacking–micellar electrokinetic capillary chromatography for the determination of multiresidues of herbicides and metabolites
461
Solid-Phase Extraction and Simultaneous Determination of Tetracycline Residues in Edible Cattle Tissues Using an HPLC-FL Method
462
Solid-phase extraction and simultaneous determination of trace amounts of sulphonated and azo sulphonated dyes using microemulsion-modified-zeolite and multivariate calibration
463
Solid-phase extraction and simultaneous spectrophotometric determination of trace amounts of Co, Ni and Cu using partial least squares regression
464
Solid-phase extraction applied to the determination of ochratoxin A in wines by reversed-phase high-performance liquid chromatography
465
Solid-phase extraction approach for phospholipids profiling by titania-coated silica microspheres prior to reversed-phase liquid chromatography–evaporative light scattering detection and tandem mass spectrometry analysis
466
Solid-phase extraction clean-up of soil and sediment extracts for the determination of various types of pollutants in a single run
467
Solid-phase extraction combined with dispersive liquid–liquid microextraction for the determination for polybrominated diphenyl ethers in different environmental matrices
468
Solid-phase extraction combined with dispersive liquid–liquid microextraction-ultra preconcentration of chlorophenols in aqueous samples
469
Solid-phase extraction combined with headspace single-drop microextraction of chlorophenols as their methyl ethers and analysis by high-performance liquid chromatography-diode array detection
470
Solid-phase extraction combined with large volume injection-programmable temperature vaporization–gas chromatography–mass spectrometry for the multiresidue determination of priority and emerging organic pollutants in wastewater
471
Solid-phase extraction coupling to capillary electrophoresis with emphasis on environmental analysis
472
Solid-phase extraction followed by dispersive liquid–liquid microextraction for the sensitive determination of selected fungicides in wine
473
Solid-phase extraction followed by high-performance liquid chromatography–ionspray interface–mass spectrometry for monitoring of herbicides in environmental water
474
Solid-phase extraction followed by liquid chromatography quadrupole time-of-flight tandem mass spectrometry for the selective determination of fungicides in wine samples
475
Solid-phase extraction followed by liquid chromatography–tandem mass spectrometry for the determination of hydroxylated benzophenone UV absorbers in environmental water samples Original Research Article
476
Solid-phase extraction for combinatorial libraries
477
Solid-phase extraction for multiresidue analysis of organic contaminants in water
478
Solid-phase extraction for multiresidue determination of sulfonamides, tetracyclines, and pyrimethamine in Bovineʹs milk
479
Solid-phase extraction for picrocrocin determination in the quality control of saffron spice (Crocus sativus L.)
480
Solid-phase extraction for the simultaneous preconcentration of organic (selenocystine) and inorganic [Se(IV), Se(VI)] selenium in natural waters
481
Solid-phase extraction gas chromatography-ion trap-mass spectrometry qualitative method for evaluation of phenolic compounds in virgin olive oil and structural confirmation of oleuropein and ligstroside aglycons and their oxidation products
482
Solid-phase extraction method for the determination of free and conjugated phenol compounds in human urine
483
Solid-phase extraction of acidic herbicides
484
Solid-Phase Extraction of Amphiphiles Based on Mixed Hemimicelle/Admicelle Formation: Application to the Concentration of Benzalkonium Surfactants in Sewage and River Water
485
Solid-phase extraction of berries’ anthocyanins and evaluation of their antioxidative properties
486
Solid-phase extraction of bismuth, lead and nickel from seawater using silica gel modified with 3-aminopropyltriethoxysilane filled in a syringe prior to their determination by graphite furnace atomic absorption spectrometry
487
Solid-phase extraction of carotenoids
488
Solid-phase extraction of esculetin from the ash bark of Chinese traditional medicine by using molecularly imprinted polymers
489
Solid-phase extraction of fluoroquinolones from aqueous samples using a water-compatible stochiometrically imprinted polymer
490
Solid-phase extraction of iron(III) with an ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique
491
Solid-phase extraction of methadone enantiomers and benzodiazepines in biological fluids by two polymeric cartridges for liquid chromatographic analysis
492
Solid-phase extraction of ochratoxin A from wine based on a binding hexapeptide prepared by combinatorial synthesis
493
Solid-phase extraction of organic compounds in atmospheric aerosol particles collected with the particle-into-liquid sampler and analysis by liquid chromatography–mass spectrometry
494
Solid-phase extraction of phenols
495
Solid-phase extraction of polar compounds with a hydrophilic copolymeric sorbent
496
Solid-phase extraction of polar hydrophilic aromatic sulfonates followed by capillary zone electrophoresis–UV absorbance detection and ion-pair liquid chromatography–diode array UV detection and electrospray mass spectrometry
497
Solid-phase extraction of polycyclic aromatic compounds
498
SOLID-PHASE EXTRACTION OF POLYCYCLIC AROMATIC HYDROCARBONS FROM AQUEOUS SAMPLES USING POLYURETHANE FOAMS IN CONNECTION WITH SOLID-MATRIX SPECTROFLUORIMETRY
499
Solid-phase extraction of polycyclic aromatic hydrocarbons in surface water: Negative effect of humic acid
500
Solid-phase extraction of quaternary ammonium herbicides
501
Solid-phase extraction of soy isoflavones
502
Solid-phase extraction of sugar cane soot extract for analysis by gas chromatography with flame ionisation and mass spectrometric detection
503
Solid-phase extraction of tanshinones from Salvia Miltiorrhiza Bunge using ionic liquid-modified silica sorbents
504
Solid-phase extraction of tramadol from plasma and urine samples using a novel water-compatible molecularly imprinted polymer
505
Solid-phase Extraction of Valproic Acid Using a Surfaced Imprinted Silica Gel Adsorbent
506
Solid-phase extraction on C18 silica as a purification strategy in the solution synthesis of a 1-thio-β-d-galactopyranoside library Original Research Article
507
Solid-phase extraction on sorbents of different retention mechanisms followed by determination by gas chromatography–mass spectrometric and gas chromatography–electron capture detection of pesticide residues in crops
508
Solid-phase extraction or liquid chromatography coupled on-line with gas chromatography in the analysis of biological samples
509
Solid-phase extraction procedure for determination of phenolic acids and some flavonols in honey
510
Solid-phase extraction procedure to remove organic acids from honey
511
Solid-phase extraction sorbent consisting of alkyltrimethylammonium surfactants immobilized onto strong cation-exchange polystyrene resin
512
Solid-phase extraction system for Pb (II) ions enrichment based on multiwall carbon nanotubes coupled on-line to flame atomic absorption spectrometry
513
Solid-phase Extraction Using Modified Carbon Nanotube and Cupferron Ligand for Preconcentration and Determination of Trace Amounts of Copper in Real Samples
514
Solid-phase extraction using molecularly imprinted polymer for selective extraction of natural and synthetic estrogens from aqueous samples
515
Solid-phase extraction using molecularly imprinted polymers for selective extraction of a mycotoxin in cereals
516
Solid-phase extraction versus matrix solid-phase dispersion: Application to white grapes
517
Solid-phase extraction versus solid-phase microextraction for the determination of chlorinated paraffins in water using gas chromatography–negative chemical ionisation mass spectrometry
518
Solid-phase extraction with a dibutylmelamine-imprinted polymer as triazine herbicide-selective sorbent
519
Solid-phase extraction with C30 bonded silica for analysis of polycyclic aromatic hydrocarbons in airborne particulate matters by gas chromatography–mass spectrometry
520
Solid-phase extraction with styrene–divinylbenzene sorbent for high-performance liquid or gas chromatographic determination of urinary chloro- and methylthiotriazines
521
Solid-phase extraction; Palladium(II); Halloysite nanotube; Inductively coupled plasma-optical emission spectrometry
522
Solid-phase extraction-capillary electrophoresis-mass spectrometry for the determination of tetracyclines residues in surface water by using carbon nanotubes as sorbent material
523
Solid-phase extraction-fluorimetric high performance liquid chromatographic determination of domoic acid in natural seawater mediated by an amorphous titania sorbent Original Research Article
524
Solid-phase extraction-gas chromatography and solid-phase extraction-gas chromatography–mass spectrometry determination of corrosion inhibiting long-chain primary alkyl amines in chemical treatment of boiler water in water-steam systems of power plants
525
Solid-phase extraction–gas chromatography–mass spectrometry using a fullerene sorbent for the determination of inorganic mercury(II), methylmercury(I) and ethylmercury(I) in surface waters at sub-ng/ml levels
526
Solid-phase extraction–gas chromatography–mass spectrometry using a fullerene sorbent for the determination of inorganic mercury(II), methylmercury(I) and ethylmercury(I) in surface waters at sub-ng/ml levels
527
Solid-phase extraction–high-performance liquid chromatography–ion trap mass spectrometry for analysis of trace concentrations of macrolide antibiotics in natural and waste water matrices
528
Solid-phase extraction–liquid chromatographic method for the determination and pharmacokinetic studies of albiflorin and paeoniflorin in rat serum after oral administration of Si–Wu decoction
529
Solid-phase extraction–thin-layer chromatography–gas chromatography method for the detection of hazelnut oil in olive oils by determination of esterified sterols
530
Solid-phase fluorescence spectroscopy for the determination of acetylsalicylic acid in powdered pharmaceutical samples
531
Solid-phase fluorescence spectroscopy for the determination of acetylsalicylic acid in powdered pharmaceutical samples Original Research Article
532
Solid-Phase Formation of Interstellar Vinyl Alcohol
533
Solid-phase Friedel–Crafts acylation on polystyrene resins-synthesis of antiepiletic 1-aryl-3,5-dihydro-4H-2,3-benzodiazepin-4-ones
534
Solid-phase FT-Raman determination of caffeine in energy drinks Original Research Article
535
Solid-phase iodine as an oxidant in flow injection analysis: determination of ascorbic acid in pharmaceuticals and foods by background correction
536
Solid-phase library synthesis of reversed-statine type inhibitors of the malarial aspartyl proteases plasmepsin I and II Original Research Article
537
Solid-phase lipid synthesis (SPLS)-2: incidental discovery of organogelators based on artificial glycolipids
538
Solid-phase lithiation of 5-carboxyindoles
539
Solid-phase microcolumn extraction and gas chromatography–mass spectrometry identification of volatile organic compounds emitted by paper
540
Solid-phase microextraction – gas chromatography mass spectrometry: A fast and simple screening method for the assessment of organophosphorus pesticides residues in wine and fruit juices
541
Solid-phase microextraction (SPME) for the determination of pyrethroids in cucumber and watermelon using liquid chromatography combined with post-column photochemically induced fluorimetry derivatization and fluorescence detection Original Research Articl
542
Solid-phase microextraction and chiral HPLC analysis of ibuprofen in urine
543
Solid-phase microextraction and gas chromatography with atomic emission detection for multiresidue determination of pesticides in honey Original Research Article
544
Solid-phase microextraction and gas chromatography–mass spectrometry analysis of p,p′-DDE in biological samples
545
Solid-phase microextraction and gas chromatography–mass spectrometry for the rapid screening of triazole residues in wine and strawberries
546
Solid-phase microextraction and gas chromatography–mass spectrometry of volatile compounds from avocado puree after microwave processing
547
Solid-phase microextraction and liquid chromatography/mass spectrometry in drug analysis Review Article
548
Solid-phase microextraction and sample stacking micellar electrokinetic chromatography for the analysis of pesticide residues in red wines
549
Solid-phase microextraction as a clean-up and preconcentration procedure for organochlorine pesticides determination in fish tissue by gas chromatography with electron capture detection
550
Solid-phase microextraction based on polypyrrole films with different counter ions
551
Solid-phase microextraction based on polypyrrole films with different counter ions Original Research Article
552
Solid-phase microextraction combined with gas chromatography and atomic emission detection for the determination of cyclopentadienylmanganese tricarbonyl and (methylcyclopentadienyl)manganese tricarbonyl in soils and seawaters
553
Solid-phase microextraction coupled to gas chromatography for the determination of 2,3-dimethyl-2,3-dinitrobutane as a marking agent for explosives
554
Solid-phase microextraction coupled to high-performance liquid chromatography to determine phenolic compounds in water samples
555
Solid-phase microextraction coupled to liquid chromatography for the analysis of phenolic compounds in water
556
Solid-phase microextraction coupled with atomic emission spectroscopy––rapid screening for volatile chlorinated compounds
557
Solid-phase microextraction coupled with capillary electrophoresis for the determination of propranolol enantiomers in urine using a sol–gel derived calix[4]arene fiber
558
Solid-phase microextraction coupled with capillary electrophoresis to determine ephedrine derivatives in water and urine using a sol–gel derived butyl methacrylate/silicone fiber
559
Solid-phase microextraction coupled with high performance liquid chromatography using on-line diode-array and electrochemical detection for the determination of fenitrothion and its main metabolites in environmental water samples
560
Solid-phase microextraction coupled with high-performance liquid chromatography for the analysis of heterocyclic aromatic amines
561
Solid-phase microextraction coupled with high-performance liquid chromatography for the determination of phenylurea herbicides in aqueous samples
562
SOLID-PHASE MICROEXTRACTION DETERMINATION OF ALCOHOL USING PENCIL LEAD
563
Solid-phase microextraction fiber development for sampling and analysis of volatile organohalogen compounds in air
564
Solid-phase microextraction fibre–water distribution constants of more hydrophobic organic compounds and their correlations with octanol–water partition coefficients
565
Solid-phase microextraction followed by gas chromatography for the speciation of organotin compounds in honey and wine samples: A comparison of atomic emission and mass spectrometry detectors
566
Solid-phase microextraction followed by gas chromatography for the speciation of organotin compounds in honey and wine samples: A comparison of atomic emission and mass spectrometry detectors
567
Solid-phase microextraction followed by gas chromatography–mass spectrometry for the determination of ink photo-initiators in packed milk
568
Solid-phase microextraction for determining the distribution of sixteen US Environmental Protection Agency polycyclic aromatic hydrocarbons in water samples
569
Solid-phase microextraction for headspace analysis of key volatile compounds in orange beverage emulsion
570
Solid-phase microextraction for herbicide determination in environmental samples
571
Solid-phase microextraction for organochlorine pesticide residues analysis in Chinese herbal formulations
572
Solid-phase microextraction for qualitative and quantitative determination of migrated degradation products of antioxidants in an organic aqueous solution
573
Solid-phase microextraction for the analysis of biological samples
574
Solid-phase microextraction for the analysis of short-chain chlorinated paraffins in water samples
575
Solid-phase microextraction for the detection of termite cuticular hydrocarbons
576
Solid-phase microextraction for the determination of haloanisoles in wines and other alcoholic beverages using gas chromatography and atomic emission detection
577
Solid-phase microextraction for the determination of systemic and non-volatile pesticides in river water using gas chromatography with nitrogen–phosphorous and electron-capture detection
578
Solid-phase microextraction for the investigation of sex pheromone of Eucosma notanthes Meyrick
579
Solid-phase microextraction from small volumes of sample in a glass capillary
580
Solid-phase microextraction gas chromatography–mass spectrometry (HS-SPME-GC–MS) determination of volatile compounds in orujo spirits: Multivariate chemometric characterisation
581
Solid-phase microextraction in bioanalysis: New devices and directions
582
Solid-phase microextraction in biomedical analysis
583
Solid-phase microextraction in pesticide residue analysis
584
Solid-Phase Microextraction Liquid Chromatography/Tandem Mass Spectrometry To Determine Postharvest Fungicides in Fruits
585
Solid-phase microextraction method for gas chromatography with mass spectrometric and pulsed flame photometric detection: studies of organoarsenical speciation
586
Solid-Phase Microextraction Method for Headspace Analysis of Volatile Compounds in Bread Crumb.
587
Solid-phase microextraction method for the determination of atrazine and four organophosphorus pesticides in soil samples by gas chromatography
588
Solid-phase microextraction method for the determination of volatile compounds associated to oxidation of fish muscle
589
Solid-phase microextraction Ni–Ti fibers coated with functionalised silica particles immobilized in a sol–gel matrix
590
Solid-phase micro-extraction of drugs from biological matrices
591
Solid-phase microextraction of hop volatiles: Potential use for determination and verification of hop varieties
592
Solid-phase microextraction of monocyclic aromatic amines using novel fibers coated with crown ether
593
Solid-phase microextraction of N-nitrosamines
594
Solid-phase microextraction of N-nitrosodimethylamine in beer
595
Solid-phase microextraction of phthalate esters from aqueous media by electrochemically deposited carbon nanotube/polypyrrole composite on a stainless steel fiber Original Research Article
596
Solid-phase microextraction of phthalate esters from aqueous media by electrophoretically deposited TiO2 nanoparticles on a stainless steel fiber
597
Solid-phase microextraction of phthalates from water
598
Solid-phase microextraction of volatile compounds from flowers of two Brunfelsia species
599
Solid-phase microextraction of volatile compounds in “Terrincho” ewe cheese: Comparison of different fibers
600
Solid-phase microextraction on-fiber derivatization for the analysis of some polyphenols in wine and grapes using gas chromatography–mass spectrometry
601
Solid-phase microextraction under controlled agitation conditions for rapid on-site sampling of organic pollutants in water
602
Solid-phase microextraction using octadecyl-bonded silica immobilized on the surface of a rotating disk: Determination of hexachlorobenzene in water Original Research Article
603
Solid-phase microextraction using pencil lead as sorbent for analysis of organic pollutants in water
604
Solid-phase microextraction using poly(pyrrole) film and liquid chromatography with UV detection for analysis of antidepressants in plasma samples
605
Solid-phase microextraction versus single-drop microextraction for the analysis of nitroaromatic explosives in water samples
606
Solid-phase microextraction with on-fiber derivatization for the analysis of anti-inflammatory drugs in water samples
607
Solid-phase microextraction with on-fiber derivatization for the determination of hydroxy-polychlorinated biphenyl compounds in urine Original Research Article
608
Solid-phase microextraction with on-fiber silylation for simultaneous determinations of endocrine disrupting chemicals and steroid hormones by gas chromatography–mass spectrometry
609
Solid-phase microextraction with on-fibre derivatisation applied to the analysis of volatile carbonyl compounds
610
Solid-phase microextraction with simultaneous oxidative sample treatment for the sensitive determination of tetra- to hexa-brominated diphenyl ethers in sediments
611
Solid-phase microextraction: a promising technique for sample preparation in environmental analysis
612
Solid-phase microextraction–gas chromatographic–mass spectrometric analysis of garlic oil obtained by hydrodistillation
613
Solid-phase microextraction–gas chromatographic–mass spectrometric method for the determination of the fungicides cyprodinil and fludioxonil in white wines
614
Solid-phase microextraction–gas chromatographic–tandem mass spectrometric analysis of polycyclic aromatic hydrocarbons: Towards the European Union water directive 2006/0129 EC
615
Solid-phase microextraction–gas chromatography mass spectrometry and multivariate analysis for the characterization of roasted coffees
616
Solid-phase microextraction—Gas chromatography to determine volatile organic sulfur compounds in the air at sewage treatment plants
617
Solid-phase micro-extraction–gas chromatography–(tandem) mass spectrometry as a tool for pesticide residue analysis in water samples at high sensitivity and selectivity with confirmation capabilities
618
Solid-phase micro-extraction–gas chromatography–mass spectrometry and headspace-gas chromatography of tetrahydrocannabinol, amphetamine, methamphetamine, cocaine and ethanol in saliva samples
619
Solid-phase microextraction–gas chromatography–mass spectrometry for the analysis of selective serotonin reuptake inhibitors in environmental water
620
Solid-phase microextraction–gas chromatography–mass spectrometry method validation for the determination of endogenous substances: Urinary hexanal and heptanal as lung tumor biomarkers Original Research Article
621
Solid-phase microextraction–gas chromatography–mass spectrometry of biologically active substances in water samples
622
Solid-phase microextraction–gas chromatography–time-of-flight mass spectrometry utilized for the evaluation of the new-generation super elastic fiber assemblies Original Research Article
623
Solid-phase microextraction-high performance liquid chromatography and diode array detection for the determination of mycophenolic acid in cheese
624
Solid-phase microextraction–liquid chromatography (SPME–LC) determination of fluoxetine and norfluoxetine in plasma using a heated liquid flow through interface
625
Solid-Phase Microextraction-Mass Spectrometry: A New Approach to the Rapid Characterization of Cheeses
626
Solid-phase modification with succinic polyethyleneglycol of aminated lipase B from Candida antarctica: Effect of the immobilization protocol on enzyme catalytic properties
627
Solid-phase molecularly imprinted on-line preconcentration and voltammetric determination of sulfamethazine in milk Original Research Article
628
Solid-phase molecularly imprinted pre-concentration and spectrophotometric determination of isoxicam in pharmaceuticals and human serum
629
Solid-phase nano extraction as a green approach for the analyte isolation
630
Solid-phase optimisation of achiral amidinobenzyl indoles as potent and selective factor Xa inhibitors
631
Solid-phase parallel synthesis applied to lead optimization: Discovery of potent analogues of the GPIIb/IIIa antagonist RWJ-50042
632
Solid-phase parallel synthesis of 2-aminoimidazolidin-4-ones
633
Solid-phase parallel synthesis of azarene pyrrolidinones as factor Xa inhibitors
634
Solid-phase parallel synthesis of substituted dihydroimidazolyl dihydrobenzimidazol-2-ones
635
Solid-phase parallel synthesis of substituted dihydroimidazolylbutyl dihydroimidazol-3-ium salts
636
Solid-phase parallel synthesis of trisubstituted dihydroimidazolyl dihydroquinoxalin-2(1H)-ones
637
Solid-phase PEGylation of an immobilized protein cage on polyelectrolyte multilayer
638
Solid-phase peptide synthesis in highly loaded conditions
639
Solid-phase peptide synthesis in water. Part 3: A water-soluble N-protecting group, 2-[phenyl(methyl)sulfonio]ethoxycarbonyl tetrafluoroborate, and its application to solid phase peptide synthesis in water
640
Solid-phase Petasis multicomponent reaction for the generation of β-lactams 3-substituted with non-proteinogenic α-amino acids
641
Solid-phase Phosphorus Pools in Highly Organic Carbonate Sediments of Northeastern Florida Bay
642
Solid-phase phosphorus speciation in Saharan Bodélé Depression dusts and source sediments
643
Solid-phase photocatalytic degradation of polystyrene plastic with goethite modified by boron under UV–vis light irradiation
644
Solid-phase photocatalytic degradation of polystyrene with modified nano-TiO2 catalyst
645
Solid-phase photocatalytic degradation of PVC by Tungstophosphoric acid—a novel method for PVC plastic degradation Original Research Article
646
Solid-phase polyethylene glycol conjugation using hydrophobic interaction chromatography
647
Solid-phase preparation of amides using N-acylbenzotriazoles
648
Solid-phase reaction synthesis of mesostructured tungsten disulfide material with a high specific surface area
649
Solid-phase reactor with copper(II) phosphate for flow-injection spectrophotometric determination of aspartame in tabletop sweeteners Original Research Article
650
Solid-Phase Refolding of Cyclodextrin Glycosyltransferase Adsorbed on Cation-Exchange Resin
651
Solid-Phase Reversible Immobilization in Microfluidic Chips for the Purification of Dye-Labeled DNA Sequencing Fragments
652
Solid-phase sodium bismuthate as an oxidant in flow injection analysis: determination of manganese in effluent streams Original Research Article
653
Solid-phase spectrofluorimetric determination of acetylsalicylic acid and caffeine in pharmaceutical preparations using partial least-squares multivariate calibration
654
Solid-phase spectrophotometric and test determination of silicate in natural water
655
Solid-phase spectrophotometric determination of nickel in water and vegetable samples at sub-μg l−1 level with o-carboxylphenyldiazoaminoazobenzene loaded XAD-4
656
Solid-phase spectrophotometric determination of trace amounts of hydrazine at sub-ng ml−1 level
657
Solid-phase stereoselective synthesis of 2′-O-methyl-oligoribonucleoside phosphorothioates using nucleoside bicyclic oxazaphospholidines
658
Solid-Phase Substitution of Ammonia in Hexaamine Heteroligand Complexes of Chromium(III) with Cyclic Tetraamines
659
Solid-phase supported profluorescent nitroxide probe for the determination of aerosol-borne reactive oxygen species
660
Solid-phase Suzuki cross-coupling reactions using a phosphine ligand based on a phospha-adamantane framework
661
Solid-phase syntheses of constrained RGD scaffolds and their binding to the αvβ3 integrin receptor
662
Solid-phase syntheses of N-substituted carbamates. Reaction monitoring by gel-phase 13C NMR using a 13C enriched BAL-linker
663
Solid-phase synthesis (SPS) of substituted uracils via Oxone® cleavage methodology
664
Solid-phase synthesis and antibacterial activity of hydroxycinnamic acid amides and analogues against methicillin-resistant Staphylococcus aureus and vancomycin-resistant S. aureus
665
Solid-phase synthesis and antibacterial evaluations of N-demethylvancomycin derivatives
666
Solid-phase synthesis and anti-infective activity of a combinatorial library based on the natural product anisomycin
667
Solid-phase synthesis and bioevaluation of Lupeol-based libraries as antimalarial agents
668
Solid-phase synthesis and biological evaluation of a parallel library of 2,3-dihydro-1,5-benzothiazepines Original Research Article
669
Solid-phase synthesis and biological evaluation of a uridinyl branched peptide urea library
670
Solid-phase synthesis and characterization of regioregular head-to-tail coupled oligo(3-p-tolylthiophene)s
671
Solid-phase synthesis and combinatorial technologies by P. Seneci, Wiley-Interscience, New York, 2000, xii+637 pp.; £70.95; ISBN: 0-471-33195-3
672
Solid-phase synthesis and conformational properties of angiotensin converting enzyme catalytic-site peptides: The basis for a structural study on the enzyme-substrate interaction
673
Solid-Phase Synthesis and Cyclative Cleavage of Quorum Sensing Depsipeptide Analogues by Acylphenyldiazene Activation
674
Solid-Phase synthesis and investigation of benzofurans as selective estrogen receptor modulators
675
Solid-Phase synthesis and pharmacological evaluation of analogues of PhTX-12—A potent and selective nicotinic acetylcholine receptor antagonist
676
Solid-phase synthesis and SAR of 4-carboxy-2-azetidinone mechanism-based tryptase inhibitors
677
Solid-phase synthesis and solution structure of bicyclic β-turn peptidomimetics: diversity at the i position
678
Solid-phase synthesis and structure–activity relationships of novel biarylethers as melanin-concentrating hormone receptor-1 antagonists
679
Solid-phase synthesis and thermal denaturation study of cyclic PNAs targeting the HIV-1 TAR RNA loop
680
Solid-phase synthesis and utilization of side-chain reactive unnatural amino acids
681
Solid-phase synthesis development of a thymidinyl and 2′-deoxyuridinyl Ugi library for anti-bacterial agent screening
682
Solid-phase synthesis of [1,2,4]triazolo[3,4-a]phthalazine and tetrazolo[5,1-a]phthalazine derivatives
683
Solid-phase synthesis of ‘diverse’ heterocycles
684
Solid-phase synthesis of 1,2,4-triazolidine-3,5-diones
685
Solid-phase synthesis of 1,2,5-trisubstituted imidazolidin-4-ones
686
Solid-phase synthesis of 1,3,4-oxadiazoline-5-thione derivatives from resin-bound acylhydrazines
687
Solid-phase synthesis of 1,3-diamino ketones
688
Solid-phase synthesis of 1,3-diamino ketones
689
Solid-phase synthesis of 1,3-diamino ketones
690
Solid-phase synthesis of 1,3-disubstituted 2-thioxoquinazoline-4-ones using SNAr reaction
691
Solid-phase synthesis of 1,3-oxazolidine derivatives
692
Solid-phase synthesis of 1,4-diketones by thiazolium salt promoted addition of aldehydes to chalcones
693
Solid-phase synthesis of 1,5-substituted 2-(N-alkylamino)-imidazolidin-4-ones
694
Solid-phase synthesis of 15N-labeled acylpentamines as reference compounds for the MS/MS investigation of spider toxins
695
Solid-phase synthesis of 1-substituted 4,5-dihydro-1,2,4-triazin-6-ones
696
Solid-phase synthesis of 2,3,4,5-tetrahydro-1H-benzo[e][1,4]diazepine derivatives
697
Solid-phase synthesis of 2,3,5-trisubstituted 4H-imidazolones
698
Solid-phase synthesis of 2,3-diphenylpropionic acid library as VLA-4 antagonists
699
Solid-phase synthesis of 2,3-disubstituted indoles: discovery of a novel, high-affinity, selective h5-HT2A antagonist
700
Solid-phase synthesis of 2,6- and 2,7-diamino-4(3H)-quinazolinones via palladium-catalyzed amination
701
Solid-phase synthesis of 2,6,8-trisubstituted purines
702
Solid-phase synthesis of 2-alkylidene-6-alkyl-imidazo[2,1-b]thiazole-3,5[2H,6H]-dione derivatives
703
Solid-phase synthesis of 2-amino-3-chloro-5- and 8-nitro-1,4-naphthoquinones: a new and general colorimetric test for resin-bound amines
704
Solid-phase synthesis of 2-aminoimidazolinones
705
Solid-phase synthesis of 2-aminoimidazolinones
706
Solid-phase synthesis of 2-aminoimidazolinones
707
Solid-phase synthesis of 2-cyanoquinazolin-4(3H)-one and 2,3-dihydrooxazolo[2,3-b]quinazolin-5-one derivatives utilizing resin-bound anthranilic acid derivatives
708
Solid-phase synthesis of 2-imidazolidinethiones via Mitsunobu reaction of N-(2-hydroxyethyl)thioureas
709
Solid-phase synthesis of 2-substituted-3-(substituted sulfanyl)-1,2,4-benzothiadiazine 1,1-dioxide library
710
Solid-phase synthesis of 3,4-dihydro-2(1H)-quinazolinones and 3,4-dihydro-1H-quinazolin-2-thiones
711
Solid-phase synthesis of 3,4-dihydroquinazoline derivatives
712
Solid-phase synthesis of 3,7-disubstituted perhydro-1,4-diazepine-2,5-diones from amino acids and β-amino acids
713
Solid-phase synthesis of 3-alkyl-2-arylamino-3,4-dihydroquinazolines
714
Solid-phase synthesis of 3-alkyl-8-arylamino-1H-imidazo[4,5-g]quinazolin-2(3H)-thiones and 3-alkyl-8-arylamino-1H-imidazo[4,5-g]quinazolin-2(3H)-ones
715
Solid-phase synthesis of 3-amino-1,2,4-triazoles
716
Solid-phase synthesis of 3-aminohydantoin, dihydrouracil, thiohydantoin and dihydrothiouracil derivatives
717
Solid-phase synthesis of 3-aryl-3-oxo-propan amides by reaction of lithium enolates with 4-nitrophenyl carbamate resin or polymer-bound isocyanate
718
Solid-phase synthesis of 3-hydroxymethyl isoxazoles via resin bound nitrile oxides
719
Solid-phase synthesis of 4-aminopiperidine analogues using the Alloc protecting group: an investigation of Alloc removal from secondary amines
720
Solid-phase synthesis of 4-aryl substituted 5-carboxy-6-methyl-3,4-dihydropyridones
721
Solid-phase synthesis of 4-aryl-1,4-dihydropyridines via the Hantzsch three component condensation
722
Solid-phase synthesis of 4-biaryl-piperidine-4-carboxamides
723
Solid-phase synthesis of 4H-2-(3-hydroxy-4-methoxyphenyl)-naphtho[1,2-b]pyran-1-one
724
Solid-Phase synthesis of 4-substituted imidazoles using a scaffold approach
725
Solid-phase synthesis of 4-triphenylphosphoranylidene-4,5-dihydropyrazol-5-ones, 4-aminocarbonyl-pyrroles, 4-methoxy-1H-pyrazol-5(2H)-ones and 2-thiazolin-4-ones from polymer-bound 1,2-diaza-1,3-butadienes
726
Solid-phase synthesis of 5-(3-indolyl)oxazoles that inhibit lipid peroxidation
727
Solid-phase synthesis of 5′-O-β,γ-methylenetriphosphate derivatives of nucleosides and evaluation of their inhibitory activity against HIV-1 reverse transcriptase
728
Solid-phase synthesis of 5-aminotetrazoles
729
Solid-phase synthesis of 5-arylhistidines via a microwave-assisted Suzuki–Miyaura cross-coupling
730
Solid-phase synthesis of 6-hydroxy-2,4-diaminoquinazolines
731
Solid-phase synthesis of a 5′-terminal TMG-capped trinucleotide block of U1 snRNA
732
Solid-phase synthesis of a combinatorial library of dihydroceramide analogues and its activity in human alveolar epithelial cells Original Research Article
733
Solid-phase synthesis of a focused library of trypanothione reductase inhibitors
734
Solid-phase synthesis of a folate conjugate of a DNA binding polyamide
735
Solid-phase synthesis of a glycosylated hexapeptide of human sialophorin, using the trichloroacetimidate method
736
Solid-phase synthesis of a glycosylated peptide fragment of the IL-8 receptor containing two vicinal oligosaccharide chains
737
Solid-Phase synthesis of a library constructed of aromatic phosphate, long alkyl chains and tryptophane components, and identification of potent dipeptide telomerase inhibitors
738
Solid-phase synthesis of a library of C-terminal agmatine dipeptides using a backbone amide linker (BAL) strategy
739
Solid-phase synthesis of a library of piperazinediones and diazepinediones via kaiser oxime resin
740
Solid-phase synthesis of a N-carboxyalkyl tripeptide combinatorial library
741
Solid-phase synthesis of a new class of oligosaccharide analogues based on azasugars
742
Solid-phase synthesis of a pentavalent GalNAc-containing glycopeptide (Tn antigen) representing the nephropathy-associated IgA hinge region Original Research Article
743
Solid-phase synthesis of a pepticinnamin E Library Original Research Article
744
Solid-phase synthesis of a selective αvβ3 integrin antagonist library
745
Solid-phase synthesis of a small library of 3-phenylthio-3-nicotinyl propionic acid derivatives acting as antagonists of the integrin αVβ3
746
Solid-phase synthesis of a type II′ β-turn peptido-mimetic library
747
Solid-phase synthesis of acridine-based threading intercalator peptides
748
Solid-phase synthesis of acyl biarylsulfonamides
749
Solid-phase synthesis of Agel 416; a novel approach to modified polyamines
750
Solid-phase synthesis of amidines by the reduction of amidoximes
751
Solid-phase synthesis of amino amides and peptide amides with unnatural side chains
752
Solid-phase synthesis of an apoptosis-inducing tetrapeptide mimicking the Smac protein
753
Solid-phase synthesis of an arylsulfone hydroxamate library
754
Solid-phase synthesis of an N-(phenylalkyl)cinnamide library via Horner–Wadsworth–Emmons reaction
755
Solid-phase synthesis of an O-linked glycopeptide based on a benzyl-protected glycan approach
756
Solid-phase synthesis of aryl ethers on high loading dendrimer resin
757
Solid-phase synthesis of aryl, heteroaryl, and sterically hindered alkyl amines using the Curtius rearrangement
758
Solid-phase synthesis of arylalkanolamines
759
Solid-phase synthesis of asymmetric cyanine dyes
760
Solid-phase synthesis of backbone-modified DNA analogs by the boranophosphotriester method using new protecting groups for nucleobases
761
Solid-phase synthesis of benzazoles, quinazolines, and quinazolinones using an alkoxyamine linker
762
Solid-phase synthesis of benzimidazole libraries biased for RNA targets
763
Solid-phase synthesis of benzimidazole N-oxides on SynPhase™ Lanterns
764
Solid-phase synthesis of benzisothiazolones as serine protease inhibitors
765
Solid-phase synthesis of benzodiazepinediones mimicking the C-terminus of the H-Ras protein
766
Solid-phase synthesis of benzothiazoles using an alkoxyamine linker
767
Solid-phase synthesis of biaryl cyclic peptides by borylation and microwave-assisted intramolecular Suzuki–Miyaura reaction
768
Solid-phase synthesis of biarylalanines via Suzuki cross-coupling and intramolecular N-acyliminium Pictet–Spengler reactions
769
Solid-phase synthesis of bis-cyclic guanidines from tripeptides
770
Solid-phase synthesis of branched thiohydantoin benzimidazolinethiones and branched thiohydantoin tetrahydroquinoxalinediones
771
Solid-phase synthesis of c(RGDfK) derivatives: on-resin cyclisation and lysine functionalisation
772
Solid-phase synthesis of carbohydrate and phosphodiester modified 2′–5′ oligoadenylate analogs
773
Solid-phase synthesis of CD52 glycopeptide and an efficient route to Asn-core pentasaccharide conjugate Original Research Article
774
Solid-phase synthesis of core 2 O-linked glycopeptide and its enzymatic sialylation
775
Solid-phase synthesis of core 3 and core 6 O-glycan-linked glycopeptides by benzyl-protection method
776
Solid-phase synthesis of C-terminal peptide aldehydes from amino acetals anchored to a backbone amide linker (BAL) handle
777
Solid-phase synthesis of C-terminal peptide amides from N-tetrachlorophthaloyl protected amino acids
778
Solid-phase synthesis of C-terminal thio-linked glycopeptides
779
Solid-phase synthesis of cyclic alkoxyketones, inhibitors of the cysteine protease cathepsin K
780
Solid-phase synthesis of cyclic polyamines
781
Solid-phase synthesis of cyclic RGD-furanoid sugar amino acid peptides as integrin inhibitors
782
Solid-phase synthesis of cyclic sulfonamides employing a ring-closing metathesis–cleavage strategy
783
Solid-phase synthesis of dehydropeptide, AM-toxin II, using a novel selenyl linker by side-chain tethered strategy
784
Solid-phase synthesis of di- and tripeptidic hydroxamic acids as inhibitors of procollagen C-proteinase
785
Solid-Phase synthesis of diamine and polyamine amino acid derivatives as HIV-1 tat-TAR binding inhibitors Original Research Article
786
Solid-phase synthesis of diaryl ketones through a three-component Stille coupling reaction
787
Solid-phase synthesis of dibenzoxazepinones
788
Solid-Phase Synthesis of Disubstituted 1,3-Dihydro-2H-imidazol-2-ones
789
Solid-Phase Synthesis of DNA Binding Polyamides on Oxime Resin Original Research Article
790
Solid-phase synthesis of DNA-interactive pyrrolo[2,1-c][1,4]benzodiazepines
791
Solid-phase synthesis of dual α4β1/α4β7 integrin antagonists: two scaffolds with overlapping pharmacophores
792
Solid-Phase synthesis of endothelin receptor antagonists
793
Solid-phase synthesis of five-dimensional libraries via a tandem Petasis–Ugi multi-component condensation reaction
794
Solid-Phase synthesis of FKBP12 inhibitors: N-Sulfonyl and N-Carbamoylprolyl/pipecolyl amides
795
Solid-phase synthesis of functionalized 1,2,3-triazoles
796
Solid-phase synthesis of functionalized 1,2,4-triazin-6-ones
797
Solid-phase synthesis of functionalized tropane derivatives via 1,3-dipolar cycloaddition
798
Solid-phase synthesis of fused [2,1-b]quinazolinone alkaloids
799
Solid-phase synthesis of glycopeptide carrying a tetra-N-acetyllactosamine-containing core 2 decasaccharide
800
Solid-phase synthesis of head and tail bis-acridinylated peptides
801
Solid-phase synthesis of hybrid thiazolidinedione-fatty acid PPARγ ligands
802
Solid-phase synthesis of hydrazinopeptides in Boc and Fmoc strategies monitored by HR-MAS NMR
803
Solid-phase synthesis of hydroxy-acids leading to macrolactones
804
Solid-phase synthesis of hydroxypiperazine derivatives using phenethylamine linker by oxidation–Cope elimination
805
Solid-phase synthesis of hydroxyproline-based cyclic hexapeptides
806
Solid-phase synthesis of imidazo[1,2-a]pyridines and imidazo[1,2-a]pyrimidines
807
Solid-phase synthesis of imidazoquinazolinone derivatives with three-point diversity
808
Solid-phase synthesis of indolines via palladium-catalyzed cyclization
809
Solid-phase synthesis of irreversible human rhinovirus 3C protease inhibitors. Part 1: Optimization of tripeptides incorporating N-terminal amides Original Research Article
810
Solid-phase synthesis of isoindolines via a rhodium-catalyzed [2+2+2] cycloaddition
811
Solid-phase synthesis of isoindolinones and naturally-occurring benzobutyrolactones (phthalides) using a cyclative-cleavage approach
812
Solid-phase synthesis of isoquinolinones using Bischler–Napieralski cyclization
813
Solid-phase synthesis of kojic acid-tripeptides and their tyrosinase inhibitory activity, storage stability, and toxicity
814
Solid-phase synthesis of lamellarins Q and O
815
Solid-phase synthesis of linear and cyclic peptides containing a calix[4]arene amino acid
816
Solid-phase synthesis of liquid crystalline isoxazole library
817
Solid-phase synthesis of Mannich-base hybridized cyclopeptides
818
Solid-phase synthesis of metal-complex containing peptides
819
Solid-phase synthesis of methyl carboxymycobactin T 7 and analogues as potential antimycobacterial agents
820
Solid-phase synthesis of modified oligopeptides via Passerini multicomponent reaction
821
Solid-Phase Synthesis of Multiantennary Oligonucleotide Glycoconjugates Utilizing On-Support Oximation
822
Solid-phase synthesis of multi-walled carbon nanotubes from butadiynyl-ferrocene-containing compounds Original Research Article
823
Solid-phase synthesis of muramyl dipeptide (mdp) derivatives using a multipin method
824
Solid-phase synthesis of N,N′-substituted acylguanidines
825
Solid-phase synthesis of N-9-substituted 2,8-diaminopurines
826
Solid-phase synthesis of naphthylamidines as factor VIIa/tissue factor inhibitors
827
Solid-phase synthesis of natural product-like macrocycles by a sequence of Ugi-4CR and SNAr-based cycloetherification
828
Solid-phase synthesis of neuroactive spider–wasp hybrid toxin analogues using a backbone amide linker
829
Solid-phase synthesis of new fused tetra, penta and hexacyclic β-carboline derivatives
830
Solid-phase synthesis of new peptide–arene hybrids from N-TCP amino acids
831
Solid-phase synthesis of new pyrrolobenzodiazepine–chalcone conjugates: DNA-binding affinity and anticancer activity
832
Solid-phase synthesis of new ribo and deoxyribo BrdU probes for labeling and detection of nucleic acids
833
Solid-Phase synthesis of new saphenamycin analogues with antimicrobial activity
834
Solid-phase synthesis of novel hybrid opiates
835
Solid-phase synthesis of novel inhibitors of Farnesyl Transferase
836
Solid-phase synthesis of N-substituted 3,4-dihydroquinazolinone derivatives
837
Solid-phase synthesis of N-substituted amidinophenoxy pyridines as factor Xa inhibitors
838
Solid-phase synthesis of Nα-benzyl-Nα-cinnamyl lysine and glutamic acid derivatives
839
Solid-phase synthesis of oligoesters using a JandaJel™ resin
840
Solid-phase synthesis of oligomeric deoxynucleic guanidine (DNG): A polycationic analogue of DNA
841
Solid-phase synthesis of oligomeric deoxynucleic-thiourea (DNT) and deoxynucleic S-methylthiourea (DNmt): a neutral/polycationic analogue of DNA
842
Solid-phase synthesis of oligomers carrying several chromophore units linked by phosphodiester backbones
843
Solid-phase synthesis of oligonucleotides containing a Bipyridine ligand at the 3′-3′ inversion of polarity site
844
Solid-phase synthesis of O-sulfated glycopeptide by the benzyl-protected glycan strategy
845
Solid-phase synthesis of oxazolones and other heterocycles via Wang resin-bound diazocarbonyls
846
Solid-phase synthesis of oxygen-bridged tetrahydropyridones
847
Solid-phase synthesis of palmitoylated and farnesylated lipopeptides employing the fluoride-labile PTMSEL linker
848
Solid-phase synthesis of partially-modified retro and retro-inverso ψ[NHCH(CF3)]-peptides
849
Solid-phase synthesis of partially-modified retro and retro-inverso ψ[NHCH(CF3)]-peptides
850
Solid-phase synthesis of partially-modified retro and retro-inverso ψ[NHCH(CF3)]-peptides
851
Solid-phase synthesis of peptide aldehydes directly on acetal resin
852
Solid-phase synthesis of peptide ribonucleic acids (PRNA)
853
Solid-phase synthesis of peptide thioacids through hydrothiolysis of resin-bound peptide thioesters
854
Solid-Phase Synthesis of Peptide-Derived Enantiospecific Nucleic Acid Analogs
855
Solid-phase synthesis of peptide–heterocycle hybrids containing a tripeptide-derived 6,6-fused bicyclic subunit
856
Solid-phase synthesis of peptides containing O-phosphoryl serine and O-phosphoryl threonine using allyl group for phosphate protection
857
Solid-phase synthesis of peptidomimetic oligomers with a phosphodiester backbone
858
Solid-phase synthesis of peptidosulfonamide containing peptides derived from Leu-enkephalin
859
Solid-phase synthesis of peptidyl α-keto heterocycles
860
Solid-phase synthesis of phenols and pyridinones via arylboronation/oxidation protocol using aryl bromides
861
Solid-phase synthesis of phosphine–oxazoline peptides
862
Solid-phase synthesis of photoaffinity probes: highly efficient incorporation of biotin-tag and cross-linking groups
863
Solid-phase synthesis of phthalocyanine and tetraazaporphyrin triangular prisms
864
Solid-phase synthesis of PhTX-3.2.4 and PhTX-2.3.3 derivatives
865
Solid-phase synthesis of polyamines using a Dde-linker: philanthotoxin-4.3.3 via an on-resin Mitsunobu reaction
866
Solid-phase synthesis of polyfunctional polylysine dendrons using aldehyde linkers
867
SOLID-PHASE SYNTHESIS OF POLYMER-BOUND β-KETOESTERS AND THEIR APPLICATION IN THE SYNTHESIS OF STRUCTURALLY DIVERSE PYRAZOLONES
868
Solid-phase synthesis of positively charged deoxynucleic guanidine (DNG) modified oligonucleotides containing neutral urea linkages: effect of charge deletions on binding and fidelity Original Research Article
869
Solid-phase synthesis of positively charged deoxynucleic guanidine (DNG) oligonucleotide incorporating 7-deazaguanine bases Original Research Article
870
Solid-Phase synthesis of positively charged deoxynucleic guanidine (DNG) oligonucleotide mixed sequences
871
Solid-phase synthesis of potential protein tyrosine phosphatase inhibitors via the Ugi four-component condensation
872
Solid-phase synthesis of pyrido[2,3-d]pyrimidin-7-ones
873
Solid-phase synthesis of pyrrolo[2,1-c][ and ]benzodiazepine-5,11-diones
874
Solid-phase synthesis of quinazolin-4(3H)-ones with three-point diversity
875
Solid-phase synthesis of quinol fatty alcohols, design of N/O-substituted quinol fatty alcohols and comparative activities on axonal growth
876
Solid-phase synthesis of quinoxaline derivatives using 6-amino-2,3-dichloroquinoxaline loaded on AMEBA resin
877
Solid-phase synthesis of quinoxaline, thiazine, and oxazine analogs through a benzyne intermediate
878
Solid-phase synthesis of quinoxalines on SynPhase™ Lanterns
879
Solid-phase synthesis of second-generation polyproline dendrimers
880
Solid-phase synthesis of serglycin glycopeptides on a new allyl ester linker
881
Solid-phase synthesis of serglycin glycopeptides on a new allyl ester linker
882
Solid-phase synthesis of serglycin glycopeptides on a new allyl ester linker
883
Solid-phase synthesis of skeletally diverse benzofused sultams via palladium-catalyzed cyclization
884
Solid-phase synthesis of Stat3 inhibitors incorporating O-carbamoylserine and O-carbamoylthreonine as glutamine mimics
885
Solid-phase synthesis of substituted 1,3,4-thiadiazoles
886
Solid-Phase Synthesis of Substituted 2,3-Diketopiperazines from Reduced Polyamides
887
Solid-phase synthesis of substituted 2-aminomethylbenzimidazoles
888
Solid-phase synthesis of substituted 3-amino-3′-carboxy-tetrahydrocarbazoles
889
Solid-phase synthesis of sulfamides
890
Solid-phase synthesis of symmetrical and unsymmetrical polyamine analogues of philanthotoxins using a Dde-linker
891
Solid-phase synthesis of terminal oligonucleotide–phosphoramidate conjugates
892
Solid-phase synthesis of tertiary methylamines via reductive alkylation–fragmentation using a hydroxylamine linker
893
Solid-phase synthesis of tertiary methylamines via reductive alkylation–fragmentation using a hydroxylamine linker
894
Solid-phase synthesis of tertiary methylamines via reductive alkylation–fragmentation using a hydroxylamine linker
895
Solid-phase synthesis of tertiary-amino linked benzamides: a versatile method for forming C–N bonds with electron-rich and electron-poor anilines
896
Solid-phase synthesis of tetrasubstituted 2-imino-1,3-thiazolines using a functionalizing cleavage strategy
897
Solid-phase synthesis of the B-chain of human α2HS glycoprotein
898
Solid-phase synthesis of the glycopeptide of human glycophorin AM bearing the consecutive sialyl-T antigen Original Research Article
899
Solid-phase synthesis of thrombin inhibitors
900
Solid-phase synthesis of traceless 1,3-diketones
901
Solid-phase synthesis of unsymmetrical ureas through the use of Kenner safety-catch linker
902
Solid-phase synthesis of α-alkylserines via phase-transfer catalytic alkylation of polymer-supported 2-phenyl-2-oxazoline-4-carboxylate
903
Solid-phase synthesis of α-hydroxy phosphonates and hydroxystatine amides. Transition-state isosteres derived from resin-bound amino acid aldehydes
904
Solid-phase synthesis of α-substituted 3-bisarylthio N-Hydroxy propionamides as Specific MMP Inhibitors Original Research Article
905
Solid-phase synthesis of α-substituted proline hydantoins and analogs
906
Solid-phase synthesis of α-sulfonylamino amide derivatives based on Ugi-type condensation reaction using sulfonamides as amine input
907
Solid-phase synthesis of γ-lactams, γ-lactones and cyclobutane derivatives from common resin-bound intermediates
908
Solid-phase synthesis on functionalised fluoropolymer resins. Part 1: Nafion resin sulfonamide-immobilised carboxylic acid derivatives and aryl vinyl sulfones
909
Solid-phase synthesis on functionalised fluoropolymer resins. Part 2: Preparation and properties of functional Merrifield-type resins possessing a perfluorinated polymer backbone
910
Solid-phase synthesis, mass spectrometric analysis of the zinc-folding, and phorbol ester-binding studies of the 116-mer peptide containing the tandem cysteine-rich C1 domains of protein kinase C gamma Original Research Article
911
Solid-phase synthesis: a linker for side-chain anchoring of arginine
912
Solid-phase synthetic method for (±)-α-amino acids via phase-transfer catalytic alkylation
913
Solid-phase temperature measurements in a HTPEM fuel cell
914
Solid-phase transformation of glass-like carbon nanoparticles into nanotubes and the related mechanism Original Research Article
915
Solid-Phase Transformations in Tetraamine and Hexaamine Mixed-Ligand Complexes of Chromium(III) with Cyclic Tetraamines
916
Solid-phase trapping of solutes for further chromatographic or electrophoretic analysis
917
Solid-phase treatment with the fungus Trametes versicolor substantially reduces pharmaceutical concentrations and toxicity from sewage sludge
918
Solid-phase ultraviolet absorbance spectrophotometric multisensor for the simultaneous determination of butylated hydroxytoluene and co-existing antioxidants
919
Solid-phase ultraviolet absorbance spectrophotometric multisensor for the simultaneous determination of butylated hydroxytoluene and co-existing antioxidants Original Research Article
920
Solid-phase versus solution synthesis of asymmetrically disubstituted furazano[3,4-b]pyrazines
921
Solid-phase Zincke route to pyridinium, tetrahydropyridine, and piperidine derivatives: vesamicol analogs
922
Solid-phase, single nucleotide primer extension of DNA/RNA hybrids by reverse transcriptases
923
Solid-phase/solution-phase combinatorial synthesis of neuroimmunophilin ligands
924
Solid-phase/supercritical-fluid extraction for liquid chromatography of phenolic compounds in freshwater microalgae and selected cyanobacterial species
925
Solid-phases and desorption processes of arsenic within Bangladesh sediments
926
Solid-precursor vaporizer for aerosol reactors: Synthesis of magnesium aluminate nanoparticles by thermal decomposition of magnesium aluminum tert-butoxide
927
Solid-Pseudopapillary Tumor of the Pancreas: Our Experience in Bangladesh
928
Solids accumulation in six full-scale subsurface flow constructed wetlands
929
Solids and nutrients removals from the liquid fraction of swine slurry through screening and flocculation treatment and influence of these processes on anaerobic biodegradability
930
Solids behaviour in a dilute gas-solid two-phase mixture flowing through monolith channels
931
Solids characterisation in an anaerobic migrating bed reactor (AMBR) sewage treatment system
932
Solids circulation and axial dispersion of cohesionless particles in a V-mixer
933
Solids concentration in the fully developed region of circulating fluidized bed downers
934
Solids concentration profiles and pressure drop in pipeline flow of multisized particulate slurries
935
Solids concentration simulation of different size particles in a cyclone separator
936
Solids containing spherical nano-inclusions with interface stresses: Effective properties and thermal–mechanical connections
937
Solids contents, properties and molecular structures of asphaltenes from different oilsands
938
Solids deposition in low-velocity slug flow pneumatic conveying
939
Solids distribution as a basis for modeling of heat transfer in circulating fluidized bed boilers
940
Solids entrainment into gas, liquid, and gas–liquid spray jets in fluidized beds
941
Solids falling in flash furnace burner concentrate chutes
942
Solids flow behavior in bends: assessing fine solids buildup
943
Solids flow mapping in a gas–solid riser: Mean holdup and velocity fields
944
Solids loading and grade on mineral froth bubble lamellae
945
Solids mixing behavior in a nano-agglomerate fluidized bed
946
Solids mixing in a circulating fluidized bed
947
Solids mixing in a down-flow circulating fluidized bed of 0.418-m in diameter
948
Solids mixing in a fluidized bed riser
949
Solids mixing in the bottom zone of a circulating fluidized bed
950
Solids modeled by ab-initio crystal field methods. Effects of intermolecular interactions on the vibrational spectrum of urea
951
Solids motion of calcium carbonate particles in a high shear mixer granulator: A comparison between dry and wet conditions
952
Solids removal in upflow anaerobic reactors, a review
953
Solids Residence Time Distribution in Gas-Flowing Solids-Fixed Bed Contactors
954
Solids suspension in a pilot-scale mechanical flotation cell: A critical impeller speed correlation
955
Solids transport in mixed-flow dryers
956
Solids, organic load and nutrient concentration reductions in swine waste slurry using a polyacrylamide (PAM)-aided solids flocculation treatment
957
Solid–solid interaction between ferric oxide and manganese carbonate as influenced by lithium oxide doping
958
Solid–solid interactions between ferric and cobalt oxides as influenced by Al2O3-doping
959
Solid–solid interactions between ZnO and Fe2O3 as influenced by Al2O3-doping
960
Solid–solid interactions in Co3O4–MoO3/MgO system
961
Solid–solid interactions in Fe2O3/MgO system doped with aluminium and zinc oxides
962
Solid–solid interactions in Li2O-doped cobalt/magnesium mixed oxides system and the electrical properties of the produced solids
963
Solid–solid interface reconstruction at equilibrated Ni–Al2O3 interfaces Original Research Article
964
Solid–solid synthesis of a hydrophobic vitamin B12 having a benzo-18-crown-6 moiety at the C10 position of the corrin ring
965
Solid–Solid Synthesis, Crystal Structure and Thermal Decomposition of Copper (II) Complex of 2-Picolinic Acid
966
Solid–solid transformation mechanism for nanocrystalline sodalite from pillared clay
967
Solid–solid transformation route to nanocrystalline sodalite from Al-PILC at room temperature Original Research Article
968
Solid–solid transformations via nanoscale intermediate interfacial phase: Multiple structures, scale and mechanics effects
969
Solid–solid transitions in slit nanopores
970
Solid–solute phase equilibria in aqueous solutions: XV [1]. Thermodynamic analysis of the solubility of nickel carbonates
971
Solid-solution catalysts for CO2 reforming of methane
972
Solid–solution equilibria of cadmium in soils
973
Solid-solution hardening and softening in Mg–Zn alloys
974
Solid-solution metal partitioning in the Humber rivers: application of WHAM and SCAMP
975
Solid-Solution Nanoparticles: Use of a Nonhydrolytic Sol-Gel Synthesis To Prepare HfO2 and HfxZr1-xO2 Nanocrystals
976
Solid–solution partitioning of plutonium in surface waters at the Atomic Weapons Establishment Aldermaston (UK)
977
Solid-solution phase formation rules for high entropy alloys: A thermodynamic perspective
978
Solid-solution red phosphors for white LEDs
979
Solid-spaced filters: an alternative for narrow-bandpass applications
980
Solid-stabilized emulsions
981
Solid-state 13C and 1H spin diffusion NMR analyses of the microfibril structure for bacterial cellulose
982
Solid-state 13C magic angle spinning NMR spectroscopy characterization of particle size structural variations in synthetic nanodiamonds
983
Solid-state 13C NMR analyses of the structures of crystallized and quenched poly(lactide)s: Effects of crystallinity, water absorption, hydrolytic degradation, and tacticity
984
Solid-state 13C NMR and molecular modeling studies of acetyl aleuritolic acid obtained from Croton cajucara Benth
985
Solid-state 13C NMR and SAXS characterization of the amorphous phase in low-molecular weight poly(ethylene oxide)s
986
Solid-state 13C NMR investigation of the structure and dynamics of highly drawn polyethylene—detection of the oriented non-crystalline component
987
Solid-state 13C NMR investigation of the structure and hydrogen bonding for stereoregular poly(vinyl alcohol) films in the hydrated state
988
Solid-state 13C NMR investigations of the glycosidic linkage in α-α′ trehalose
989
Solid-State 13C NMR Reveals Annealing of Raft-Like Membranes Containing Cholesterol by the Intrinsically Disordered Protein α-Synuclein
990
Solid-state 13C NMR spectroscopic studies of soil organic matter at two magnetic field strengths
991
Solid-state 13C NMR spectroscopy studies of xylans in the cell wall of Palmaria palmata (L. Kuntze, Rhodophyta) Original Research Article
992
Solid-state 13C NMR spectroscopy: characterization of soil organic matter under two contrasting residue management regimes in a 2-year-old pine plantation of subtropical Australia
993
Solid-state 13C NMR studies of the interaction of acetone, carbon tetrachloride and trichloroethylene with soil components
994
Solid-state 13C NMR study of banana liquid crystals – 1: Two different alkyl tail-group packing environments in the B7 phase
995
Solid-state 13C NMR study of banana liquid crystals – 2: Alkyl tail-group packing environments in the hexagonal columnar phase
996
Solid-State 13C NMR Study of Poly(vinyl alcohol) Gels
997
Solid-state 13C NMR to assess organic matter transformation in a subsurface wetland under cheese-dairy farm effluents
998
Solid-State 17O NMR Characterization of PDMS-MxOy (M = Ge(IV), Ti(IV), Zr(IV), Nb(V), and Ta(V)) OrganicInorganic Nanocomposites
999
Solid-state 17O NMR in carbohydrates
1000
Solid-state 17O NMR study of the electric-field-gradient and chemical shielding tensors in polycrystalline γ-glycine
