<< مقالات لاتين فني مهندسي >>
<< بر اساس عنوان >>
1
Analysis and Test of Torque Balanced Electromechanical Mooring Cables
2
Analysis and test on electric field concentration effect of bipolar conventional air terminal
3
Analysis and Test Preparation of Attenuator for W-band Folded Waveguide TWT
4
Analysis and Test Results of a Brushless Doubly Fed Induction Machine With Rotary Transformer
5
Analysis And Test Results Of Quasi-resonant Converters
6
Analysis and Test Results of Tunneling IP over NFCIP-1
7
Analysis and testing for error tolerant motion estimation
8
Analysis and testing of a direct-voltage induced-e.m.f.-commutated thyristor motor
9
Analysis and testing of a thermoelectric heat exchanger configured for cooling a processor module heat load
10
Analysis and testing of analog and mixed-signal circuits by an operation-region model: a case study of application and implementation
11
Analysis and testing of application layer protocols with an application to FTAM
12
Analysis and testing of delay in HLA-based distributed simulation system
13
Analysis and testing of LC3L type bidirectional DC-DC converter for constant voltage
14
Analysis and testing of mobile wireless networks
15
Analysis and Testing of Negative Sequence Heating of Turbine Generator Rotors
16
Analysis and Testing of Negative Sequence Heating of Turbine Generator Rotors
17
Analysis and testing of programs with exception handling constructs
18
Analysis and Testing of Sorting Algorithms on a Standard Dataset
19
Analysis and Testing of the Boost Converter Constructed with SOI LDMOSFET Switches: Effects of Various Inductor Types on Performance
20
Analysis and testing of the DIII-D ohmic heating coil lead repair clamp
21
Analysis and testing of Web applications
22
Analysis and testing of wind farm power quality in Inner Mongolia
23
Analysis and testing on delays with two time frames
24
Analysis and testing on the switching states transitions of hybrid clamped multilevel inverters
25
Analysis and tests of a dual three-phase 12-slot 10-pole permanent magnet motor
26
Analysis and Tests of a Dual Three-Phase 12-Slot 10-Pole Permanent-Magnet Motor
27
Analysis and Tests of a Right Circular Cylinder in a Photon Environment
28
Analysis and Tests of a Satellite Model in a Photon Environment
29
Analysis and tests of TF magnet insulation samples for the JET upgrade to 4 tesla
30
Analysis and tests of the new cylindrical dipole antenna structure with a bazooka balun
31
Analysis and Tests of the Sensorless Rotor Position Detection of Ringed-Pole Permanent-Magnet Motor
32
Analysis and tests of the sensorless rotor position detection of ringed-pole PM motor
33
Analysis and tests of visual based techniques for orbital rendezvous operations
34
Analysis and the design of a first - order ΔΣ modulator using very incomplete settling
35
Analysis and thoughts for China´s problems in global collaboration and communication
36
Analysis and Tolerance Study of an Array Antenna for a New Generation of Secondary Radars
37
Analysis and topologies for high efficiency amplifiers based on RF synthesis
38
Analysis and Torque Calculation of an Axial Flux Hysteresis Motor Based on Hyperbolic Model of Hysteresis Loop in Cartesian Coordinates
39
Analysis and torque optimisation of switched reluctance motor
40
Analysis and Tracing of Applications Based on Software Transactional Memory on Multicore Architectures
41
Analysis and Tracking of Optimal Load in Wireless Power Transfer Systems
42
Analysis and traffic characterization of a wide area network
43
Analysis and Trajectory Tracking Control of a Modular Multilevel Converter
44
Analysis and Transcoding Time Prediction of Online Videos
45
Analysis and Transformation of Idiomatic Crosscutting Concerns in Legacy Software Systems
46
Analysis and transformation of image using spectral transformation technique
47
Analysis and Transformation of Textual Energy Distribution
48
Analysis and Transformations for Efficient Query-Based Debugging
49
Analysis and treatment of edge effects on the radiation pattern of a microstrip patch antenna
50
Analysis and Treatment of Electronic Voltage Transformers Exceeded Tolerance Problem
51
Analysis and treatment of transformer faults caused by corrosive sulfur
52
Analysis and Treatment of U-Shape PCB I/O Ports to Reduce the EMI From Image-Plane Noise
53
Analysis and tuning efficiency optimization of magnetically tuned printed E-plane circuit filters
54
Analysis and tuning of libtensor framework on multicore architectures
55
Analysis and tuning of linear active disturbance rejection controller for load frequency control of power systems
56
Analysis and two proposed design methodologies for optimizing power efficiency of a class D amplifier output stage
57
Analysis and understanding of aptamer and peptide molecular interactions: Application to mucin 1 (Muc1) aptasensor
58
Analysis and understanding of GaAs MESFET behaviour in power amplification
59
Analysis and uniform design of a single-layer slotted waveguide array antenna with baffles
60
Analysis and use of antarctic data for developing of the National Antarctic scientific center portal
61
Analysis and Use of Harkless Diode Mount for IMPATT Oscillators
62
Analysis and use of several generalized ℋ(
∞
mixed sensitivity frameworks for stable multivariable plants subject to simultaneous output and input loop breaking specifications
63
Analysis and utilization of long-term data from a nearshore ADCP
64
Analysis and Utilization of the Climatic Resources in Xiangxi River Basin
65
Analysis and Utilizing of the Error Models in Network Education with NS3
66
Analysis and validation in design time of distributed control systems implemented by means of rule based expert systems
67
Analysis and validation of a biogas hybrid SOFC/GT emulator
68
Analysis and validation of a dynamic model for PMSM with stator fault
69
Analysis and validation of a human postural control model
70
Analysis and validation of a new path loss model for LEO satellite communication systems
71
Analysis and Validation of a Planar High-Frequency Contactless Absolute Inductive Position Sensor
72
Analysis and Validation of a Population-Based Design of a Wound-Rotor Synchronous Machine
73
Analysis and validation of a real-time AC drive simulator
74
Analysis and Validation of a Shadowing Simulation Model Suited for Dynamic and Heterogeneous Wireless Networks
75
Analysis and validation of AUTOSAR models
76
Analysis and validation of cavity electromagnetic effect
77
Analysis and validation of high-resolution satellite DEMs generated from EROS-B data for montaguto landslide
78
Analysis and validation of hybrid model for signal via structures in complex conditions
79
Analysis and validation of IEC 61131-3 applications using a MDE approach
80
Analysis and validation of partially dynamically reconfigurable architecture based on Xilinx FPGAs
81
Analysis and validation of sea surface temperature from multi-sensors in East-China Sea
82
Analysis and validation of the maximal reasonable link group size in static 802.11a Wireless Mesh Networks: A study towards channel assignment
83
Analysis and verification of a simplified model of the harmonic inductance of slotless PM machines
84
Analysis and verification of an analog VLSI incremental outer-product learning system
85
Analysis and verification of board power delivery network impact on DDR3L memory interface in ARM SoC application
86
Analysis and verification of Colored Petri net in PPPoE protocol
87
Analysis and Verification of Design Concepts for a 7000-hp Ring Gear Driven Mill - Part I
88
Analysis and Verification of Design Concepts for a 7000-hp Ring Gear Driven Mill - Part II
89
Analysis and verification of multi-agent interaction protocols
90
Analysis and verification of power grids considering process-induced leakage-current variations
91
Analysis and verification of the diagnosability of Hybrid Systems
92
Analysis and Verification of the Doubly Salient Brushless DC Generator for Automobile Auxiliary Power Unit Application
93
Analysis and verification of the interaction model in software design
94
Analysis and verification of the PATH AHS coordination-regulation layers hybrid system
95
Analysis and Verification of Two-Level Random Aperiodic PWM Schemes for DC–DC Converters
96
Analysis and verification of Two-Phase Commit & Three-Phase Commit Protocols
97
Analysis and verification on side effect of anti-backlash delay in phase-frequency detector
98
Analysis and verification on side effect of anti-backlash delay in phase-frequency detector
99
Analysis and vibration control of a helicopter rotor blade
100
Analysis and visualisation of flow around blades of axial fans for large capacity open-type motors
101
Analysis and visualization for clone refactoring
102
Analysis and visualization of category membership distribution in multivariate data
103
Analysis and Visualization of Co-authorship Networks for Understanding Academic Collaboration and Knowledge Domain of Individual Researchers
104
Analysis and visualization of complex phenomena
105
Analysis and Visualization of Dynamic Clusterings
106
Analysis and visualization of ERD and ERS with adapted local cosine transform
107
Analysis and Visualization of Gene Expression Data via a Framework of Geometric Representation
108
Analysis and visualization of index words from audio transcripts of instructional videos
109
Analysis and visualization of market power in electric power systems
110
Analysis and visualization of metabolic pathways and networks: A hypegraph approach
111
Analysis and Visualization of Movement related EEG activities with Local Discriminant Bases
112
Analysis and visualization of predicate dependence on formal parameters and global variables
113
Analysis and visualization of properties of free-form surfaces
114
Analysis and Visualization of Proteomic Data by Fuzzy Labeled Self-Organizing Maps
115
Analysis and visualization of pulsation in B-mode cranial ultrasound images
116
Analysis and Visualization of Research Collaboration Pattern of an Institute through Social Network Analysis Perspective
117
Analysis and Visualization of Scientific Communities with Information Extracted from the Web
118
Analysis and Visualization of Spatial Proteomic Data for Tissue Characterization
119
Analysis and visualization of SSH attacks using honeypots
120
Analysis and visualization of temporal changes in bloggers´ activities and interests
121
Analysis And Visualization Of The EEG In Phasespace
122
Analysis and visualization of the geographical distribution of atlantic forest bromeliads species
123
Analysis and Visualization of Time Series Data from Consumer-Generated Media and News Archives
124
Analysis and Visualization of Traffic Conditions of Road Network by Route Bus Probe Data
125
Analysis and VLSI architecture for 1-D and 2-D discrete wavelet transform
126
Analysis and VLSI architecture of a nonlinear edge-preserving noise-smoothing image filter
127
Analysis and VLSI architecture of update step in motion-compensated temporal filtering
128
Analysis and VLSI Implementation of EWA Rendering for Real-Time HD Video Applications
129
Analysis and white-box modeling of weakly nonlinear time-varying circuits
130
Analysis Approach of Winning Factors in Competitive Basketball
131
Analysis Architecture of a Mobile Sports Replay System
132
Analysis as a First-Class Citizen: An Application to Architecture Description Languages
133
Analysis asian moon - [Briefing in depth]
134
Analysis at the First Four Resonant Mode Types of an Esclosed rectangular microstrip patch on a Dielectric Substrate
135
Analysis Ball Grid Array defects by using new image technique
136
Analysis balun transformers in UHF range
137
Analysis banks, synthesis banks, LPTV filters: Proposition of an equivalence definition application to the design of invertible LPTV filters
138
Analysis Based Blind Compressive Sensing
139
Analysis Based on AHP about the Factors of E-Government Services Outsourcing
140
Analysis based on chunk size and threads for file transfer using Message Transmission Optimization Mechanism (MTOM)
141
Analysis Based on Generalized Vector Quantization for Information Hiding
142
Analysis based on the shortest path method of equipment replacement
143
Analysis based reduction using sensitivity analysis
144
Analysis between AMSR-E swath brightness temperature and ground snow depth data in winter time over Tibet Plateau, China
145
Analysis between ECG and respiration signals in type II diabetic patients in the UAE
146
Analysis between single-probe and four-probe field calibration for vehicle EMS test
147
Analysis between the noise properties of single-pump and dual-pump fiber optical parametric amplifiers
148
Analysis beyond UML
149
Analysis by Contract
150
Analysis By Contract: An Introduction To UMLs Object Constraint Language (ocl)
151
Analysis by contract: UML with attitude!
152
Analysis by Differential Scanning Calorimetry of concrete modified with microencapsulated phase change materials
153
Analysis by FDTD method of a microstrip antenna with PBG considering the substrate thickness variation
154
Analysis by finite element method of a coupled inductor circuit used as current injection interface
155
Analysis by homogenization theory and experimental research of linear accelerator collinear load coating
156
Analysis by indicators performance of the conceptual structures mCCHP-SE using renewable energy sources
157
Analysis by measurements and circuit simulations of the PT- and NPT-IGBT under different short-circuit conditions
158
Analysis by Multiconductor Line Method of the Piezoelectric Travelling Wave Transducer in the Form of Flat Meander with Oneside Arrangement of Piezocapacistance Loadings
159
Analysis by numerical simulation regarding the stability of the synchronous generator operating in autonomous or grid connected regime
160
Analysis by queuing model of multi-threshold mechanism in ATM switches
161
Analysis by simulation of a spread spectrum intercept receiver
162
Analysis by synthesis adaptive predictive correlated speech coding
163
Analysis by synthesis ECG signal compression
164
Analysis by synthesis of acoustic correlates of British, Australian and American accents
165
Analysis by Synthesis of an Information Presentation Method of Embodied Agent Based on the Time Lag Effects of Utterance to Communicative Actions
166
Analysis by Synthesis of Embodied Communication via VirtualActor with a Nodding Response Model
167
Analysis by synthesis of FM modulation and aspiration noise components in pathological voices
168
Analysis by synthesis of the timing of utterance to communicative actions on greeting embodied interaction
169
Analysis by synthesis spatial audio coding
170
Analysis by synthesis speech coding with generalized pitch prediction
171
Analysis by Synthesis: 3D Object Recognition by Object Reconstruction
172
Analysis by Wavelet Frames of Spatial Statistics in SAR Data for Characterizing Structural Properties of Forests
173
Analysis calculation and testing of rotary inductosyn angle measuring errors
174
Analysis calculation of eccentric annular aperture throttle based on turbulent state
175
Analysis calculation of speed characteristic of hydro-pneumatic spring based on damping valve parameter
176
Analysis calibration system error of six-dimension force/torque sensor for space robot
177
Analysis challenges and interface physics in silicon nanodevices
178
Analysis characteristics and optimal design procedure of half-bridge LLC loaded resonant converter
179
analysis charched debate
180
Analysis classes for space exploration reliability assessments
181
Analysis Coaxial and Modeling of "Two-Gap" Line Rectangular Waveguide Junctions
182
Analysis comparison of energy efficiency: CALENER vs TRNSYS
183
Analysis conditions on interval observer synthesis for linear systems with variable parameters
184
Analysis Conducting Antennas Using TD-EFIE
185
Analysis construction method of double-decked electric power tunnel
186
Analysis Continuous Conduction Mode of Buck-Boost Converter Using Bridge Rectifier Control
187
Analysis control middleware for large-scale video surveillance
188
Analysis Current Regulation for Torque Control for a Very Distorted CEMF Type IPMSM
189
Analysis cyclic submatrices in structure of basis discrete harmonic transform
190
Analysis design and application of sphere loaded monopole antenna
191
Analysis design and experimental verification of a quadratic boost converter
192
Analysis design and implementation of VSI fed high gain full bridge isolated DC-DC converter for renewable energy applications
193
Analysis design and modeling of crescent antenna for UWB applications
194
Analysis Design and Simulation of a Three-Phase Three-Level Nine Switches Inverter Using Space Vector Modulation
195
Analysis design optimisation and simulation of switched reluctance motors
196
Analysis designed diameter of cone bit
197
Analysis dictionary learning based on Nesterov´s gradient with application to SAR image despeckling
198
Analysis dictionary learning based on summation of blocked determinants measure of sparseness
199
Analysis directional features in images using Gabor filters
200
Analysis disadvantage of multimedia education
201
Analysis distances for similarity estimation by Fuzzy C-Mean algorithm
202
Analysis due to vector magnetic field for recording characteristic of metal evaporated tape
203
Analysis ECoG features for movement execution using denoising source separation
204
Analysis Effects of Lead on Chlorophyll Fluorescence of Wheat Leaves with Confocal Software
205
Analysis elastic??plastic behaviour and anisotropy properties of copper film from nanoindentation using numerical computation method
206
Analysis electromagnetic disturbance of feed switch in coal mine tunnels
207
Analysis EM characteristics of tiny periodic structure with FDTD method
208
Analysis EMI of a PFC on the band pass 150 kHz-30 MHz for a reduction of the electromagnetic pollution
209
Analysis Engine for Automated Health Checks, Early Problem Detection and Advanced Problem Determination
210
Analysis environment for low voltage networks
211
Analysis Equations for Shielded Suspended Substrate Microstrip Line and Broadside-Coupled Stripline
212
Analysis evaluation of collision detection scheme utilizing MIMO transmission
213
Analysis evaluation of multiplex transmission using MIMO transmission and A-MPDU for a collision detection scheme in WLAN
214
Analysis evaluation of near-infrared spectral sensitivity in ground-based XCO2 retrieval using ground-based observations
215
Analysis experiences using information visualization
216
Analysis Extrinsic transfer Characteristics of the Constituent decoders
217
Analysis failure factors for small & medium software projects based on PLS method
218
Analysis farm: A cloud-based scalable aggregation and query platform for network log analysis
219
Analysis Features of Fast-Acting Radio Electronic Systems with Combined FM-AM Modulation
220
Analysis features of information resources processing
221
Analysis filters´ symmetry polarities of M-channel alias-free linear-phase filter banks
222
Analysis flux linkage measurement method without using rotor clamping device for switched reluctance motors
223
Analysis for 4-D Fast Polarization MUSIC algorithm
224
Analysis for a class of information problem
225
Analysis for a Class of Information Systems
226
Analysis for a class of winner-take-all model
227
Analysis for a dielectrically filled parallel-plate waveguide with finite number of periodic slots in its upper wall as a leaky-wave antenna
228
Analysis for a General Automaton with Distinguishable Receptors and Effectors
229
Analysis for a planar 3 degree-of-freedom parallel mechanism with actively adjustable stiffness characteristics
230
Analysis for a trend on the optimal arrangements in a multi-state consecutive-k-out-of-n:F system
231
Analysis for AC Voltage Withstand Test of HV XLPE Power Cable
232
Analysis for active network security based on pi-calculus model
233
Analysis for adaptability of reducing LPG C
2
content in absorbing-stabilizing system
234
Analysis for Adverse Selection of Venture Enterprise in IPO Market Based on Evolutionary Game Theory
235
Analysis for Agent technique and its applications
236
Analysis for an age-structured SVIR epidemic model with vaccination
237
Analysis for an electron source based on microchannel plate principles
238
Analysis for application reliability parameters of communication networks
239
Analysis for arbitrary trapezoidal-groove guide with the method of moment
240
Analysis for Arctic valve heat tracing requirements
241
Analysis for arctic valve heat tracing requirements
242
Analysis for atrial fibrillation waves
243
Analysis for Botnet Detection Techniques
244
Analysis for Brain Activities during Operations Using Measured EEG
245
Analysis for calculation method of shielding flashover rate on common-tower double transmission line
246
Analysis for Capon and MUSIC DOA estimation algorithms
247
Analysis for charged spacers in FED
248
Analysis for classification of similar documents among various websites using rapid miner
249
Analysis for cloud testing of web application
250
Analysis for Combustion Characteristics of Large-Scale Pool Fire with Wind
251
Analysis for Commanding the Self-Pulsation of DFB Laser Diode With Electronic Feedback for Photonic Analog-to-Digital Conversion Application
252
Analysis for complex power distribution networks considering densely populated vias
253
Analysis for configuration prediction of redundant manipulators based on AMSIP distribution
254
Analysis for Construction Project Transaction Methods Decision Based on Fuzzy AHP
255
Analysis for correct reasoning by robots: modus ponens, modus tollens
256
Analysis for coupled problems between eddy currents and dynamic deflections of a thin shell structure
257
Analysis for coupling between parallel photonic crystal waveguides
258
Analysis for critical success factors of energy performance contracting (EPC) projects in China
259
Analysis for design optimisation of double PM-rotor radial flux eddy current couplers
260
Analysis for development of biosignals acquisition manual for a biomedical engineering laboratory
261
Analysis for device independent quantum key distribution based on the law of large number
262
Analysis for digital content industry value chain
263
Analysis for Domain Dynamics in Amorphous Magnetostrictive Wires of the Composition (Fe
77.5
Si
7.5
B
15
)
264
Analysis for double-fed AC-excited variable-speed constant-frequency wind power generation system
265
Analysis for drivers of stock market volatility when rare disasters strike
266
Analysis for Dynamic Characteristics and Relative Intensity Noise of a New Polarization-Insensitive Quantum Well Structure Optoelectronic Integrated Device
267
Analysis for dynamic characteristics of a single-sided linear induction motor having joints in the secondary conductor and back-iron
268
Analysis for effective approaches towards generating of artificial neuron structures
269
Analysis for efficiency improvement of CMOS class-E power amplifiers with MEMS inductors
270
Analysis for Elastic Modulus of Main Fill Materials to Stress Properties of High Fill Embankment Structure
271
Analysis for Electric Loads of Residential Buildings During Summer in Wuhan
272
Analysis for electromagnetic leakage through a plane shield with an arbitrarily-oriented dipole source
273
Analysis for electrophotographic process on digital copier
274
Analysis for Emergency-Mechanism of Natural Disasters in Highway Based on ISM
275
Analysis for error code performance of MPEG-2 transport system
276
Analysis For Establishing Target Safety Levels For IVHS
277
Analysis for Fault Detection of Vector-Controlled Permanent Magnet Synchronous Motor With Permanent Magnet Defect
278
Analysis for fMRI feature of anxiety disorder patient by language stimulation
279
Analysis for grid connected wind power system in the arid region
280
Analysis for Heterogeneous Coverage Problem in Multimedia Sensor Networks
281
Analysis for high-efficiency GaAs solar cells on Si substrates
282
Analysis for identifying character with noise or defect via discrete Hopfield neural networks
283
Analysis for improvement of simultaneity of shuttering in an ultra high-speed framing camera
284
Analysis for Incremental Calculation of Distribution Reductions
285
Analysis for insertion effects of dispersed generators in South Korea power system
286
Analysis for in-situ fission rate measurements using
4
He gas scintillation detectors
287
Analysis for instances´ staying-time distribution in the workflow
288
Analysis for interference-based capacity of vehicular ad hoc networks
289
Analysis for inverted pandulums use for human sway modeling
290
Analysis for IP transmission network technologies
291
Analysis for Irregularities of Listing Companies Based on Evolutionary Game Theory
292
Analysis for Large Passenger Flow Area and Monitoring Technology
293
Analysis for large-scale integration of PV system in Japan with a high time-resolution optimal power generation mix model
294
Analysis for LLC resonant converter considering parasitic components at very light load condition
295
Analysis for Localization-Oriented Coverage in Camera Sensor Networks
296
Analysis for Location-Based Key Pre-distribution in Wireless Sensor Networks
297
Analysis for locomotive wheels´ degradation
298
Analysis for magnetic and radiation spectral properties of undulators at HiSOR
299
Analysis for magnetic field in the air gap of the wheel multi-disc coreless permanent magnet synchronous motor
300
Analysis for Magnetic Stimulation Effects on Acupoint
301
Analysis for Market-driven Multipath Inter-domain Routing
302
Analysis for mean effective gain of mobile antennas in land mobile radio environments
303
Analysis for mechanics model of wheat and random vibration
304
Analysis for MIMO correlated frequency-selective channel in the presence of interference
305
Analysis for MIMO correlated frequency-selective channel in the presence of interference
306
Analysis for mission reliability of a combat tank
307
Analysis for MM/GTD of circularly polarized dual beam antennas
308
Analysis for Multi-Channel Retailer Competitive Game
309
Analysis for multilevel models applications on communication research in China
310
Analysis for neutral and Markovian jump systems with delays
311
Analysis for non-stationary road surface roughness regarding four-wheel vehicles using Hilbert-Huang Transform
312
Analysis for non-strictly-proper systems
313
Analysis for Oil Thermosyphon Circulation and Winding Temperature in ON Transformers
314
Analysis for one-place unbounded Petri nets based on modified reachability trees
315
Analysis for Online P2P Lending Auction
316
Analysis for optimum threshold voltage and load current of E-D-type GaAs DCFL circuits
317
Analysis for performance of a vibratory micromachined gyroscope based on modeacceleration method
318
Analysis for permanent magnet motor taking account of magnetizing process
319
Analysis for phase center of Pyramidal horn antennas for out of band
320
Analysis for predicting near-field effects of on-aircraft antennas
321
Analysis for radial coupling of permanent magnets by fourier transform
322
Analysis for Radiation-Resistance of InGaP and GaAs Sub-Cells for InGaP/GaAs/Ge 3-Junction Solar Cells
323
Analysis for rapid tail current decay in IGBTs with low dose p-emitter
324
Analysis for Reachability Problem of Bounded Petri Net Using Key Constraints Method
325
Analysis for Real-Time Video Monitoring and Determine the Degree of Crowd
326
Analysis for reducing power consumption of wireless local area network access points
327
Analysis for reflection and transmission of P-SV waves based on dual variables system
328
Analysis for Reliability of Groyne Safety during Random Erosion Process
329
Analysis for reproduced light field of 3D displays
330
Analysis for response of earthquake to bridge considering coupling vibration of pier-water
331
Analysis for Reuse and Maintenance: A Program for Experimentation
332
Analysis for RF character of the disc-loaded waveguide structure
333
Analysis for Ring Arranged Axial Field Halbach Permanent Magnets
334
Analysis for security implementation in SDLC
335
Analysis for shielding effect of metal plate with apertures with FDTD
336
Analysis for shielding effectiveness of an enclosure with a dielectric-backed aperture and a PCB
337
Analysis for shielding effectiveness of infinite metal plate with arrayed apertures using semi-analytical FDTD
338
Analysis for shortest path algorithm on convex polytope in E
3
339
Analysis for Signal and Power Integrity Using the Multilayered Finite Difference Method
340
Analysis for singal processing development with general purpose processor
341
Analysis for spectrum efficiency in single cell trunked and cellular mobile radio
342
Analysis for temperature field and thermal stress of the pulsed inductor
343
Analysis for Temperature Field and Thermal Stress of the Pulsed Inductor
344
Analysis for textural features in Nuclei of Cervical Cyto Images
345
Analysis for the abnormal growth of bushing dielectric loss in a 500KV transformer
346
Analysis for the arc-suppression technologies of grounding fault in distribution networks
347
Analysis for the BER of LTE system with the interference from radar
348
Analysis for the Cause of Indoor Flying Dust and Its Control Method in an Office Building
349
Analysis for the characteristics of a voltage tunable functional quantum structure optoelectronic integrated device
350
Analysis for the composition of information flow security properties on Petri net
351
Analysis for the degradation mechanism of photovoltaic ribbon wire under thermal cycling
352
Analysis for the design of a unipersonal electric vehicle prototype with photovoltaic panels
353
Analysis for the design of open applications on mobile devices
354
Analysis for the dispersion characteristics of coupled-microstrip with tuning septums in 3-layers dielectric by the method of lines
355
Analysis for the displacement and inclined crack of continuous rigid frame bridge
356
Analysis for the effect on voltage sag of safety bus as electrical operating modes in nuclear power plants
357
Analysis for the foot board lower limb rehabilitation robot
358
Analysis for the Impact of the Geometric Parameters of Train Seat on Riding Comfort Based on Human Body CAD Models
359
Analysis for the integration feasibility of OpenSPARC T1 and a Petri Nets processor to form a system with hardware synchronization capability
360
Analysis for the mal-function of protective devices (Re-closer) at the primary feeders with dispersed power sources
361
Analysis for the optimal contract with stock grants
362
Analysis for the power loss of electro hydrostatic actuator and hydraulic actuator
363
Analysis for the quality risk evolution of highway engineering construction based on qualitative simulation
364
Analysis for the Radiation Characteristics of Symmetrical Dipole Antenna in Mine Tunnel
365
Analysis for the Reflected Waves Transmitted on to the Channel by Tall Grounded Objects Using a Special Case
366
Analysis for the safety case for JET D-T operation
367
Analysis for the seasonal goods purchase while the supplier repurchase unsold goods
368
Analysis for three-dimension model of radio propagation based on ray tracing
369
Analysis for time offset of PN sequence in CDMA system
370
Analysis for token ring networks operating under message priorities and delay limits
371
Analysis for Topological Properties of the Network Feeding Usenet News
372
Analysis for transmission characteristics of a novel open similar V-shaped groove guide
373
Analysis for transmission characteristics of arbitrarily-shaped guide filled with 1-D inhomogeneous dielectric
374
Analysis for unfairness of TCP outcast problem in data center networks
375
Analysis for Unstable Problem of PMSM Current Control System in Overmodulation Range
376
Analysis for upper limit of air cooling by engineered porous metal heat sinks
377
Analysis For Vacuo-Thermojunction Characteristics Using Microcomputer
378
Analysis framework for cooperating mobile cable robots
379
Analysis framework for cooperative multi-relaying over in-door composite fading environments
380
Analysis framework for networked control systems of multiple guided weapons: Switched system approach
381
Analysis Framework for Opportunistic Spectrum OFDMA and Its Application to the IEEE 802.22 Standard
382
Analysis framework for tailored selection of learning objects methodologies
383
Analysis framework for the digital inversion of nonlinear deterministic characteristics in ΣΔ modulation
384
Analysis framework of complex service performance for electronic commerce
385
Analysis framework of layer 1 VPNs using PCEMP
386
Analysis Framework of SC Recycling Process Based on SD
387
Analysis Framework Study of Relationship Value: Theory Foundation, Antecedent and Model
388
Analysis from robust control under environnement constraint. Application for traffic model
389
Analysis grasp stability for multi-fingered robot hand
390
Analysis grassland dynamics and its environment background based on digital platform-in case of Inner Mongolia
391
Analysis Guided Visual Exploration of Multivariate Data
392
Analysis H
∞
norm of fractional order system based on LMI
393
Analysis Hierarchy Set Pair Model on Material Selection
394
Analysis if a permanent magnet dot matrix printer head
395
Analysis Image of Multiplayer Thin Films
396
Analysis impact factors of trust of emergent events on web diffusion channels
397
Analysis improvement of Takagi-Sugeno fuzzy rules using convexity constraints
398
Analysis in 3-D of the complex and arbitrary bilateral finlines
399
Analysis in a finite time-frequency plane
400
Analysis in commutation of a new high voltage thyristor structure for high temperature
401
Analysis in Credit Risk of Listed Company Based on KMV Model
402
Analysis in DSC-PLL grid synchronization method under grid frequency variation
403
Analysis in performance and new model for multiple kernels executions on many-core architectures
404
Analysis in second harmonic distortion of distributed feedback laser diode by phase measurement
405
Analysis in Sensibility of a Motion Detection Algorithm for Selecting Noise Reduction Methods in X-Ray Image Sequences
406
Analysis in software engineering
407
Analysis in start-up performance of SRM based on direct instantaneous torque control
408
Analysis in the Context of Space Radiation Hardness Assurance of Low Dose Rate Results Obtained With the MIL and ESCC Test Methods
409
Analysis in the frame of space radiation hardness assurance of low dose rate results obtained with MIL and ESCC test method
410
Analysis in the internet traffic pattern based on RTT over ADSL in Thailand
411
Analysis in Theory and Technology Application of Compressive Sensing
412
Analysis including reliability, income and cost for power systems
413
Analysis individual tacit knowledge toward innovation
414
Analysis inductively coupling wireless connection in 3D package
415
Analysis influence factors of free cash flow for listed textile enterprise based on panel model
416
Analysis Influence of NFD Filter in FSK Modulation for Reduction ISI
417
Analysis information impact for users in social networks
418
Analysis Integration of Internet of Things from the Shanghai Lianhua Logistics
419
Analysis Interaction for Joint Compensation of SVC and TCSC in Power System by Singular Value Decomposition
420
Analysis into factors of dynamical modes of manufacturing process innovations
421
Analysis into Timing Advance Issue in CoMP Systems
422
Analysis ionospheric effects on GPS satellite communication link
423
Analysis K-SVD: A Dictionary-Learning Algorithm for the Analysis Sparse Model
424
Analysis levels for improved user-centric energy cost analysis
425
Analysis Linear Active Networks by use of Structural Controllability Condition over F(z)
426
Analysis load diagrams in industry as an instrument for energy efficiency improvement
427
Analysis mechanical properties of simply supported wall-beam on Steel fiber concrete with finite element
428
Analysis method about vibration Influence of transfer alignment based on finite element and aerodynamic models
429
Analysis Method Based on Impression Words for Impression Evaluation Method by Space
430
Analysis Method for Generalized Suspended Strip Lines
431
Analysis Method for Generalized Suspended Striplines
432
Analysis method for linear regression model with unequally spaced autoregression series error
433
Analysis method for loss evaluation considering the half-turn effect in three-phase autotransformers
434
Analysis method for microstrip line power dividers with arbitrary branching circuit pattern
435
Analysis method for motor characteristics with three-dimensional flux distribution
436
Analysis Method for Single and Coupled Striplines Loaded with Dielectric Ridge
437
Analysis method for transient fields in planar structures by marching-on-in-time integral equation technique
438
Analysis method of a nonstationary waveform its application to engine vibration signals
439
Analysis method of components thermal behaviour. Computer aided design for a Radar power subset.
440
Analysis method of compound uncertainty for water quality risk under cascade development mode
441
Analysis Method of Energy for C Source Program and Its Application
442
Analysis method of head positioning error for hard disk drives - settling response analysis
443
Analysis method of improving the precision of vehicle location and navigation in ITS
444
Analysis method of long-time behavior of circuit breaker with oil dashpot
445
Analysis method of mammogram based on neural network with fuzzy reasoning
446
Analysis Method of Microstrip Antennas on Hemispherical Multilayer Structures
447
Analysis method of MIMO MRC systems under nakagami m fading environment
448
Analysis method of mixed mode crack in 2D finite piezoelectric media
449
Analysis method of negative ion by electrostatic atomization employing MPS method and FEM
450
Analysis method of nonlinear self-heating ef fects based on simulated large signal spectra
451
Analysis method of nonstationary waveform based on modulation model
452
Analysis method of parabolic reflector antenna
453
Analysis method of periodic solution using Haar wavelet transform for autonomous nonlinear circuits
454
Analysis method of slot array antenna taking into account mutual coupling
455
Analysis Method of Steel Wire Broken Signal Based on SPWM
456
Analysis method of synchronizations time of spread spectrum signals receiver in catcom systems with CDMA
457
Analysis Method of the Dynamic Force and Torque Distribution in the Magnet Array of a Commutated Magnetically Levitated Planar Actuator
458
Analysis method of the input impedance of a spiral antenna with given configuration
459
Analysis method of voltage stability for bulk power system by P-V and Q-V curves considering dynamic load
460
Analysis method on maneuvering motion pattern of trimaran unmanned surface vessel
461
Analysis method on parameter identifiabilityfor excitation system model of generator
462
Analysis method on SMEs´ informatization based on economy and management´s valuation
463
Analysis method study of static strength on complex mechanical structures
464
Analysis Method to A Halbach PM Ironless Linear Motor With Trapezoid Windings
465
Analysis method to approximate the spectral density of noises
466
Analysis method using equivalent circuit considering harmonic components of pole change motor
467
Analysis method without task model for interpreting human demonstration
468
Analysis methodologies and experimental benchmarks for eddy current testing
469
Analysis methodologies of assessment of impact teleworking on the decrease carbon emissions of physical mobility
470
Analysis methodology for project design utilizing UML
471
Analysis methodology of adaptive resource allocation schemes for handoff calls: combining equilibrium and transient analysis
472
Analysis methodology of diesel spray and flame by means of in-cylinder endoscopic imaging
473
Analysis methodology: are we done? [discrete-event simulation]
474
Analysis methods and design of transformers with low leakage inductance for pulsed power applications
475
Analysis methods for extracting knowledge from large-scale WiFi monitoring to inform building facility planning
476
Analysis methods for optical heterodyne DPSK receivers corrupted by laser phase noise
477
Analysis Methods for Ultrasonic Inspection of Steam Turbine Discs
478
Analysis methods of Acoustic Emission signal for monitoring of reinforced concrete structure: A review
479
Analysis methods of circuit elements buried in ceramic multilayer substrate
480
Analysis methods of coaxial microcalorimeter data
481
Analysis Methods of Firewall Policies by using Spatial Relationships between Filters
482
Analysis methods of interharmonics investigations in power supply systems
483
Analysis Methods of Multi-state Systems Partially Having Dependent Components Using Multiple-Valued Decision Diagrams
484
Analysis Methods of Oil Contamination for Terahertz Frequencies
485
Analysis methods of phase propagation in autonomic oscillation of Physarum polycephalum
486
Analysis methods of sulfide and sulfoxide compounds in mineral insulating oil for diagnosis on electrostatic charging of power transformers
487
Analysis Methods of the Proper Using of Random Numbers in RFID Authentication Protocols
488
Analysis Methods of Workflow Execution Data Based on Data Mining
489
Analysis methods study on Pudong seawall monitoring displacement
490
Analysis model based recovery of remote sensing data
491
Analysis Model for Effects of Regional Electricity Markets to the Operation of Provincial Power Companies
492
Analysis Model for Magnetic Energy Harvesters
493
Analysis model for measuring information flow in social networks
494
Analysis Model for the Microstrip Slot Antenna
495
Analysis model of bottleneck sections in military logistics network
496
Analysis model of distributed coordination function
497
Analysis Model of Drilling Tool Failure Based on PSO-SVM and Its Application
498
Analysis Model of Electromagnetic Interference Flowing in a Substation Cable
499
Analysis model of international competitiveness forming mechanism in food processing industry based on value increment
500
Analysis model of lane adjust about Urban Elevated Road ramp merge area
501
Analysis model of multiple input-queued switches with PIM scheduling algorithm
502
Analysis model of promotion strategies to increase the usage of cloud retail
503
Analysis model of X-ray coherent scatter images
504
Analysis modeling and simulation of low-voltage MOSFETs in synchronous-rectifier buck-converter applications
505
Analysis Models for Blind Search in Unstructured Overlays
506
Analysis occurrence of equatorial and low latitude ionospheric scintillations over Indonesia
507
Analysis of "Scanner Ferquency" Noise in Fmri Timeseries
508
Analysis of "One Road One Line with Straight Driving" Bus system based on TransCAD
509
Analysis of ΔΣ-synchronization in wireless sensor nodes
510
Analysis of ΔP-ΔQ area of uncontrolled islanding in low voltage grids with PV generators
511
Analysis of ‘goat’ within user population of an offline signature biometrics
512
Analysis of “Conti” pre-insulated pipes with diffusion barrier versus traditional pre-insulated pipes used in district heating networks
513
Analysis of “furnace cities" in China using MODIS/LST product (MOD11A2)
514
Analysis of “Importance sampling” in electric power system security
515
Analysis of “Tarmac Delays” at New York Airports
516
Analysis of α-β-γ filters
517
Analysis of ΔΣ modulators with zero mean stochastic inputs
518
Analysis of “An MOS four-quadrant analog multiplier using simple two-input squaring circuits with source followers”
519
Analysis of “quasi-modes” in periodic segmented waveguides
520
Analysis Of ΣΔ Modulator With Leaky Integrator With DC Input
521
Analysis of ×86 instruction set usage for DOS/Windows applications and its implication on superscalar design
522
Analysis of (Ag,Cu)(In,Ga)Se
2
solar cells deposited by a hybrid process
523
Analysis of (Bi
2
Te
3
-PbTe) hybrid thermoelectric generator for effective power generation
524
Analysis of ``Dot Product Space´´ Shape Descriptions
525
Analysis of ´D type´ flip-flop frequency changers
526
Analysis of ´unexpected´ depolarization effects of precipitation scatter signals at 30 GHz
527
Analysis of
E
-
H
plane tee junction using a variational formulation
528
Analysis of
N
unreliable work stations in parallel serviced by
M
repair machines
529
Analysis of
N
×
N
passive optical star coupler based on the normal modes of
N
input waveguides
530
Analysis of
Z
-invariant and
Z
-variant semiconductor rib waveguides by explicit finite difference beam propagation method with nonuniform mesh configuration
531
Analysis of
Centers in Ultrathin Hafnium Silicate Gate Stacks
532
Analysis of
Asymmetry in MOSFET Small-Signal Amplifiers
533
Analysis of
-Phase-Shifted Fiber Bragg Gratings for Ultrasonic Detection
534
Analysis of
in a semi-infinite medium with an irregular boundary by means of network manipulators
535
Analysis of
-PSK With MRC Receiver Over
Fading Channels With Outdated CSI
536
Analysis of
-Tier Uplink Cellular Networks With Ambient RF Energy Harvesting
537
Analysis of 0° hybrid junction constructed with broad-band transmission-line transformer
538
Analysis of 0.1 to 0.3 micron wide, ultra dense GMR memory elements
539
Analysis of 0.5 billion unknowns using a parallel FMM-FFT solver
540
Analysis of 0/1 Knapsack Problem Using Deterministic and Probabilistic Techniques
541
Analysis of 0dB and 10dB babble noise on stuttered speech
542
Analysis of 1.8 GHz macrocell measurements for personal communications
543
Analysis of 1/ƒ
2
and 1/ƒ
3
noise in the high-pass chopper amplifier with a high-impedance source
544
Analysis of 1/f characteristics of male/female voiced speech residual
545
Analysis of 1/f fluctuation in walking using gyro sensor system
546
Analysis of 1/f fluctuation of keystroke dynamics and heart rate variability
547
Analysis of 1/f Fluctuations of Heart Rate Response While Walking or Listening to Sounds
548
Analysis of 1/f fluctuations of walking listening to Mozart´s music
549
Analysis of 1/f noise for CMOS with high-k gate dielectrics
550
Analysis of 1/f noise in CMOS preamplifier with CDS circuit
551
Analysis of 1/f noise in CMOS preamplifier with CDS circuit
552
Analysis of 1/f noise in switched MOSFET circuits
553
Analysis of 1/f processes
554
Analysis of 100 Mb/s Ethernet for the Whitney commodity computing testbed
555
Analysis of 100 utility SGIP PV interconnection studies
556
Analysis of 1064-nm Pumped Tm-doped Silica Glass Fiber Amplifier Operating at 1470 nm
557
Analysis of 11 GHz slant path fade duration and fade slope
558
Analysis of 12 pulse phase control AC/DC converter
559
Analysis of 12-lead classification models for ECG classification
560
Analysis of 12-pulse rectifier operation under balanced and unbalanced voltage source with input impedance
561
Analysis of 15-months rain rate measurements at NTUA campus
562
Analysis of 16-APSK modulation in AWGN and Rayleigh fading channel
563
Analysis of 16-QAM over a nonlinear channel
564
Analysis of 1982–2006 Sudano-Sahelian vegetation dynamics using NOAA-AVHRR NDVI data and normalized rain-use efficiency
565
Analysis of 1-bit output noncoherent fading channels in the low SNR regime
566
Analysis of 1D, 2D and 3D periodical photonic crystals
567
Analysis of 1MW Variable Speed Wind Turbine Parameter Optimal Design Based on Cost Modeling Method
568
Analysis of 1-out-of-2:G Warm-Standby Repairable System
569
Analysis of 1-Server n-Unit System
570
Analysis of 2 Models of Standby Redundant Systems
571
Analysis of 2,4-D and its ozonation intermediates by high performance liquid chromatography
572
Analysis of 2.45 GHz 4-bit hybrid-coupled phase shifter for phased arrays
573
Analysis of 20-nm particles on Si surfaces by combination of intensified light-scattering and SEM/EDX
574
Analysis of 24 hour heart rate variability in post-infarction patients
575
Analysis of 270/290/330-nm AlGaN-Based Deep Ultraviolet Light-Emitting Diodes With Different Al Content in Quantum Wells and Barriers
576
Analysis of 2D- and 3D-isotropic split ring resonators
577
Analysis of 2-D correlation properties of sea surface backscattered signal
578
Analysis of 2-D frequency converter utilizing compound nonlinear photonic-crystal structure by condensed node spatial network method
579
Analysis of 2D intrinsic mode function
580
Analysis of 2D log-Gabor Filters to Encode Iris Patterns
581
Analysis of 2D lumped circuit by equivalent Thevenin source method
582
Analysis of 2D metamaterial structures using accelerated computation of mixed-potential Green´s functions
583
Analysis of 2D multimode interference structures
584
Analysis of 2-D occlusion by subtracting out
585
Analysis of 2D operators on topographic and non-topographic processor architectures
586
Analysis of 2-D periodic leaky wave antennas with subwavelength profile
587
Analysis of 2-D periodic leaky-wave nano-antennas in the NIR
588
Analysis of 2-D periodic structures using the FD-FD method
589
Analysis of 2D photonic bandgap waveguides using a simple analytical method
590
Analysis of 2D sound reproduction with fixed-directivity loudspeakers
591
Analysis of 2-D Surface-Emitting ROW-DFB Semiconductor Lasers for High-Power Single-Mode Operation
592
Analysis of 2D symmetrically coupled vertical microstrip lines between two infinite grounded planes using HBEM
593
Analysis of 2-Degree of Freedom Outer Rotor Spherical
Actuator Employing 3-D Finite Element Method
594
Analysis of 2-dimensional flow field generated by a 1-electrode-pair ion-drag pump
595
Analysis of 2G and 3G urban area coverage measurement
596
Analysis of 2-level random aperiodic PWM schemes for DC-DC converters
597
Analysis of 2-MeV Electron-Irradiation Induced Degradation in FD-SOI MOSFETs Fabricated on ELTRAN and UNIBOND Wafers
598
Analysis of 2R optical regenerator utilising self-phase modulation in highly nonlinear fibre
599
Analysis of 2-State, 3-Neighborhood Cellular Automata Rules for Cryptographic Pseudorandom Number Generation
600
Analysis of 2-TFTs AMOLED pixel circuit based on an on-current model of poly-Si TFTs
601
Analysis of 2-Unit Standby Redundant Repairable Systems
602
Analysis of 3 and 4 branch epicyclic transmission systems for Hybrid Electrical Vehicles using matrix method and TSA tool
603
Analysis of 3×5 planar array antenna with mutual coupling and optimization using PSO
604
Analysis of 32GBaud DP-QPSK transmission over mixed dispersion managed/unmanaged transparent domains
605
Analysis of 3-cm radio height-gain curves taken over rough terrain
606
Analysis of 3D bodies with periodicity in one direction and finite sized in the others using a combined formulation in both real and spectral domains
607
Analysis of 3D cardiac deformations with 3D SinMod
608
Analysis of 3D computed tomographic imaging of ground-wall insulation for AC rotating machines
609
Analysis of 3D conjugate heat transfers in electronics
610
Analysis of 3D current flow in undoped FinFETs and approaches for compact modeling
611
Analysis of 3-D cylindrical structures using the finite difference time domain method
612
Analysis of 3-D diffraction effects and oblique incidence in magnetooptic photonic bandgap structures
613
Analysis of 3D dynamic simulation and 4D representation technologies for mobile cranes
614
Analysis of 3-D Effects in Segmented Cylindrical Quasi-Halbach Magnet Arrays
615
Analysis of 3D electric field and insulation optimization of oil-immersed inverted current transformer
616
Analysis of 3D Face Reconstruction
617
Analysis of 3D human motion in a computer vision- based motion capture system
618
Analysis of 3-D images generated by hierarchical disaggregation
619
Analysis of 3-D integral imaging displays using the Wigner distribution
620
Analysis of 3D interconnect performance: Effect of the Si substrate resistivity
621
Analysis of 3-D interconnect structures with PEEC using SPICE
622
Analysis of 3D Linear and Non-linear Filtering Effects Based on 3D MDCT Medical Images
623
Analysis of 3-D Locations of All Strands in CIC Conductor
624
Analysis of 3-D magnetic fields in high leakage reactance transformers
625
Analysis of 3D Magnetic Fields in Wiggler Magnets for Free-Electron Laser
626
Analysis of 3-D magnetic fields measured using a magnetic force scanning tunneling microscope
627
Analysis of 3-D metallization structures by a full-wave spectral-domain technique
628
Analysis of 3-D micromotion of porous-coated femoral prostheses
629
Analysis of 3D microwave cavities using hierarchal vector finite elements
630
Analysis of 3-D microwave resonators using covariant-projection elements
631
Analysis of 3-D myocardial motion in tagged MR images using nonrigid image registration
632
Analysis of 3D nonlinear eddy current problem using the field variables H and E directly
633
Analysis of 3D Numerical Simulation for an Airfoil Probe in a Compressor
634
Analysis of 3-D partial discharge patterns in XLPE power cable based on fractal theory
635
Analysis of 3-D phase space dynamics of pencil-to-sheet-electron-beam transformation in highly-non-paraxial quadrupole lens system
636
Analysis of 3D PPN guidance laws for nonmaneuvering target
637
Analysis of 3-D Random Direction Mobility Model for Ad Hoc Network
638
Analysis of 3-D rotation fitting
639
Analysis of 3-D scene with partially occluded objects for robot vision
640
Analysis of 3-D shape estimation using bistatic multi-channel radar systems
641
Analysis of 3D SPECT image reconstruction and its extension to ultrasonic diffraction tomography
642
Analysis of 3D static temperature field of water cooling induction motor in mini electric vehicle
643
Analysis of 3D Structural Root Architecture Data of Trees Grown on Slopes
644
Analysis of 3D thermal field and deformation in the stator of large hydro-generators
645
Analysis of 3D thermal field in the stator of high-capacity and high-torque-density motor with forced evaporative-cooling system
646
Analysis of 3D thermal field in the stator of large hydro-generator with evaporation-cooling system
647
Analysis of 3D Transient Temperature Field for Permanent Magnet Linear Synchronous Motor with High Thrust Density
648
Analysis of 3D unidirectional magnetic photonic crystals
649
Analysis of 3D Vertical Stub on Microstrip Line
650
Analysis of 3-D vibrations of rectangular AT-cut quartz plates with a bi-mesa structure
651
Analysis of 3-dimensional turbo code ensembles
652
Analysis of 3D-SAR based on Angle Compression Principle
653
Analysis of 3GPP LTE-Advanced cell spectral efficiency
654
Analysis of 3GPP SAE Access Stratum Security Protocol
655
Analysis of 3-Leg Transformer Cores and a New Instrument for Measurement of Exciting-Current Waveforms
656
Analysis of 3-level inverter scheme with DC-link voltage balancing using LS-PWM & SVM techniques
657
Analysis of 3-phase inverter with resistive load
658
Analysis of 3-Phase Superconducting Fault Current Limiters in Power Systems With Inhomogeneous Quenching
659
Analysis of 3rd-order passive intermodulation generated from metallic materials
660
Analysis of 4
th
-order LCLC resonant power converters
661
Analysis of 40 Gb/s TDM-transmission over embedded standard fiber employing chirped fiber grating dispersion compensators
662
Analysis of 4500 V double trench MOS controlled thyristor
663
Analysis of 45-nm Multi-Gate Transistors Behavior Under Heavy Ion Irradiation by 3-D Device Simulation
664
Analysis of 48-pulse based STATCOM and UPFC performance under balanced and fault conditions
665
Analysis of 5 GHz MIMO Antennas for Peer-to-Peer Communications
666
Analysis of 50 Gbaud homodyne coherent receivers relying on line-coding and injection locking in lasers
667
Analysis of 50 GHz spacing in WDM transmissions over G.652 and NZ-DSF fibres
668
Analysis of 6×10 Gbps spectrally efficient optical AP-DCDM based communication system
669
Analysis of 60 GHz band indoor wireless channels with channel configurations
670
Analysis of 60 GHz flip-chipped package using EM tool-based time-domain reflectometry
671
Analysis of 60 Hz magnetic fields near ground level in 187 kV switchyard of a 187/66 kV AC substation
672
Analysis of 65 nm technology grounded-gate NMOS for on-chip ESD protection applications
673
Analysis of 6-nm AlGaAs SQW low-confinement laser structures for very high-power operation
674
Analysis of 7 Models for the 2-Dissimilar-Unit, Warm Standby, Redundant System
675
Analysis of 7 years Aqua AMSR-E derived soil moisture data over India
676
Analysis of 7T SRAM cell with SNM 0n 45nm technology for increasing cell stability
677
Analysis of 8 mm high power TE
01
-TM
11
mode converter in overmoded waveguide
678
Analysis of 8×8 spot converter of VCSEL array module using microlens array
679
Analysis of 8/6 two-layer switched reluctance motor with rotor shifting technique for servo applications
680
Analysis of 80 rooftop PV systems in the Tucson, AZ area
681
Analysis of 802.11 OFDM in High Multipath Environments
682
Analysis of 802.16 based last mile wireless networks
683
Analysis of 8x8 butler matrix switched beam smart antenna having different current distributions
684
Analysis of 900 MHz SAW filters on ZnO/GaAs structures
685
Analysis of 903 voice signals of patients with five organs illness and normal persons in traditional Chinese medicine auscultation
686
Analysis of 94GHz low voltage second-harmonic gyrotron
687
Analysis of a ‘turn-key’ no hardware space mission using the orbital services model
688
Analysis of a “/0” Stealth Scan From a Botnet
689
Analysis of a λ/4-phase-shifted double phase-shift-controlled distributed feedback wavelength tunable optical filter
690
Analysis of a `switched´ implementation of the adaptive stochastic filter
691
Analysis of a
TE
22,6
118-GHz Quasi-Optical Mode Converter
692
Analysis of a 0.6-THz Second Harmonic Gyrotron With Gradually Tapered Cavity
693
Analysis of a 100-GHz double-drift IMPATT oscillator
694
Analysis of a 1060-nm Nd:SiO
2
superfluorescent fiber laser
695
Analysis of a 10kW-2.45GHz Ferrite Phase Shifter
696
Analysis of a 12/16 switched reluctance machine using combined circuit and field computation
697
Analysis of a 140GHz Two-Section Folded Waveguide Traveling-Wave Tube
698
Analysis of a 150 GHz spatial power divider/combiner
699
Analysis of a 17 element conformal array of stacked circular patch elements using an enhanced FDTD approach
700
Analysis of a 170-GHz frequency doubler with an array of planar diodes
701
Analysis of a 1-Server, 3-Unit, Redundant System with Inspection and Delayed Replacement
702
Analysis of a 2D microwave tomography algorithm applied to a differential configuration in GPR prospecting
703
Analysis of a 2nd order recursive LMS adaptive predictor
704
Analysis of a 2-Phase Drag-Cup Induction Machine
705
Analysis of a 2-phase model for optimization of condition-monitoring intervals
706
Analysis of a 2R optical regenerator utilizing self-phase modulation in a highly nonlinear fiber
707
Analysis of a 2-terminal negative resistance
708
Analysis of a 3–5 GHz UWB CMOS low-noise amplifier for wireless applications
709
Analysis of a 300 MW variable speed drive for pump-storage plant applications
710
Analysis of a 34 GHz peniotron oscillator
711
Analysis of a 36kV Vacuum Interrupter based on a triple junction shielding research
712
Analysis of a 3D microwave imaging system
713
Analysis of a 3D recursive filtering edge detector for extracting muscle fiber orientation
714
Analysis of a 3-D System Function Measured for Magnetic Particle Imaging
715
Analysis of a 3D toroidal network for a shared memory architecture
716
Analysis Of A 3-level-vsi Neutral-point-control For Fundamental Frequency Modulated Svc-applications
717
Analysis of a 3-phase air-core superconducting power transformer
718
Analysis of a 3-phase induction machine with inclined static eccentricity
719
Analysis of a 3-Phase Inverter with Resistive Load
720
Analysis of a 4-phase tapped-inductor DC-DC converter for high boost ratio wide input voltage range applications
721
Analysis of a 4-port Bragg device
722
Analysis of a 5.5-V Class-D Stage Used in
30-dBm Outphasing RF PAs in 130- and 65-nm CMOS
723
Analysis of a 5-bar finger mechanism having redundant actuators with applications to stiffness and frequency modulations
724
Analysis of a 5-dof planar biped mechanism with parallelogram-type links
725
Analysis of a balanced magnetic circuit as a memory element
726
Analysis of A Bandgap Circuit DC Shift Caused by Substrate Noise Generated by Power Switches
727
Analysis of a bandwidth allocation protocol for Ethernet passive optical networks (EPONs)
728
Analysis of a bandwidth allocation strategy for proportional streaming services
729
Analysis of a baroreflex model for the study of the chronotropic response to vagal nerve stimulation
730
Analysis of a Basket of Currencies Portfolio Based on Copula-GARCH Method
731
Analysis of a battery-integrated boost converter for module-based series connected photovoltaic system
732
Analysis of a bayesian multiuser. detector for non-data-aided cdma communications
733
Analysis of a bearingless machine with divided windings
734
Analysis of a Behavior Based Nonholonomic Wheeled Mobile Robot Control With Hybrid System Approach
735
Analysis of a bent-dipole
736
Analysis of a BICS-only concurrent error detection method
737
Analysis of a bidirectional coupled-inductor Cuk converter operating in sliding mode
738
Analysis of a bi-directional DC-DC converter topology for low power application
739
Analysis of a Bidirectional DC-DC Converter with Wide Voltage Conversion Range
740
Analysis of a Bilaminar Circular Piezoelectric Actuator for Micropumps
741
Analysis of a bio-dynamic model via Lyapunov principle and small-world network for tuberculosis
742
Analysis of a biped powered walking model based on potential energy compensation
743
Analysis of a biphase-based servo format for hard-disk drives
744
Analysis of a bipolar current source resonant power inverter
745
Analysis of a bistatic Radar Cross Section measurement capability for the Boris Vian anechoic chamber
746
Analysis of a blind code acquisition scheme for WCDMA systems in relatively fast fading channels
747
Analysis of a Block Arithmetic Coding: Discrete divide and conquer recurrences
748
Analysis of a Bloom Filter algorithm via the supermarket model
749
Analysis of a boost converter with tapped inductor and reduced voltage stress across the buffer capacitor
750
Analysis of a boost-type power factor corrector using a conductance model
751
Analysis of a borderless fab scenario in a distributed simulation testbed
752
Analysis of a borehole radar in cross-hole mode
753
Analysis of a Botnet Takeover
754
Analysis of a bound of Voronoi region V(C
0
) and proposal of sub-optimum decoding algorithm
755
Analysis of a Bowtie Nanoantenna for the Enhancement of Spontaneous Emission
756
Analysis of a broad band packet network with rate based network access control
757
Analysis of a broad wall waveguide slot coupler by FDTD method
758
Analysis of a broadband beamformer based on trapezoidal filters and nested arrays
759
Analysis of a broadband choke horn and a dipole-disk with ring as feeds for the Arecibo tri-reflector system
760
Analysis of a Broadband Detector Circuit
761
Analysis of a broadband dispersion compensating photonic crystal fiber Raman amplifier
762
Analysis of a Broadband High-Efficiency Switch-Mode /spl Delta//spl Sigma/ Supply Modulator Based on a Class-E Amplifier and a Class-E Rectifier
763
Analysis of a Broadband Low-Profile Two-Strip Monopole Antenna
764
Analysis of a broadband Q band folded waveguide traveling-wave tube
765
Analysis of a buck PWM DC-DC converter in discontinuous conduction mode
766
Analysis of a buffered cognitive wireless network with dynamic spectrum assignment
767
Analysis of a buffered TDM system with a general arrival process
768
Analysis of a Bufferless OpMiGua Node
769
Analysis of a building power system with a rooftop PV array and phevs as an aggregator
770
Analysis of a built-in test architecture for direct-conversion SiGe millimeter-wave receiver frontends
771
Analysis of a Buried Layer Millimeter-Wave Phase Shifter (Short Paper)
772
Analysis of a burstiness curve for FBM traffic and token bucket shaping algorithm
773
Analysis of a C Language Teaching Example Based on the ARCS Model: The Basic Concept and Use of Structure
774
Analysis of a Call Admission Control Algorithm for Real-Time Traffic in OFDMA Based Cellular Networks
775
Analysis of a capacitive loaded buck converter
776
Analysis of a capacitive-filter, half-wave rectifier fed by a parallel-load resonant tank
777
Analysis of a capacitively loaded photovoltaic cell as a circuit power source
778
Analysis of a capacitor-based hybrid source used for pulsed load applications
779
Analysis of a capacitor-based pulsed-power system for driving long-range electromagnetic guns
780
Analysis of a carbon fibre reinforced polymer slotted waveguide array fed by a loop type end launcher
781
Analysis of a Cascade Asymmetric Topology for Multilevel Converters
782
Analysis of a cascade double /spl Gamma/-CL current source resonant inverter
783
Analysis of a cascaded INS calibration filter
784
Analysis of a case of subrefraction and its influence on electromagnetic waves propagation
785
Analysis of a case study suggesting the phase change from cloud droplets to snow particles from ground based remote sensing data
786
Analysis of a cavity backed annular slot ring antenna using design of experiment techniques
787
Analysis of a cavity-backed annular slot antenna with one point shorted
788
Analysis of a cavity-backed coaxial array of ring-slot antennas
789
Analysis of a CCSS#7 Network supporting database services
790
Analysis of a CDMA downlink in multipath fading channels
791
Analysis of a CDMA downlink with non-orthogonal spreading sequences for fading channels
792
Analysis of a CDMA soft handoff algorithm
793
Analysis of a CDMA soft-handoff algorithm
794
Analysis of a Cell-based Call Admission Control Scheme for QoS Support in Multimedia Wireless Networks
795
Analysis of a cellular system for QoS providing under differentiated services
796
Analysis of a centered-inclined waveguide slot coupler
797
Analysis of a centralized control strategy in mitigating inter-area power oscillations
798
Analysis of a Certain Type of Individual Escape System
799
Analysis of a CFAR correlation radiometer
800
Analysis of a chaos control scheme through simple frequency domain criteria
801
Analysis of a Chaos-Based Non-Coherent Delay Lock Tracking Loop
802
Analysis of a charge probe and its response near metallic and dielectric interface
803
Analysis of a charge pump power supply with a floating voltage reference
804
Analysis of a charge redistribution SAR ADC with partially thermometer coded DAC
805
Analysis of a charge-pump PLL: a new model
806
Analysis of a charger with autotransformer
807
Analysis of a chiral dielectric loaded folded-waveguide slow-wave structure
808
Analysis of a choke ring groundplane for multipath control in Global Positioning System (GPS) applications
809
Analysis of a circuit breaker solenoid actuator system using the decoupled CAD-FE-integral technique
810
Analysis of a circuit exhibiting ferroresonance
811
Analysis of a circular array of monopoles using a radial guide field matching method
812
Analysis of a circular array of vias
813
Analysis of a circular earthing plate
814
Analysis of a circular microstrip disk antenna with a thick dielectric substrate
815
Analysis of a circular patch antenna radiating in a parallel-plate radial guide
816
Analysis of a Circular Waveguide Cavity Loaded with Thick Ferrite Disks
817
Analysis of a Circular Waveguide Loaded with Thick Annular Metal Discs for Wide-Band Gyro-TWTs
818
Analysis of a circular-disc printed-circuit antenna
819
Analysis of a circumferential aperture beside the radial waveguide near the reflector
820
Analysis of a circumferential slot antenna on a sectoral cylindrical cavity excited by a probe using method of moments
821
Analysis of a circumferentially cut narrow slot on an infinite PEC tube
822
Analysis of a clamped series inverter with a transformer coupled load
823
Analysis of a class E power amplifier with series-parallel resonator
824
Analysis of a Class E rectifier with a series capacitor
825
Analysis of a class E tuned power amplifier with non-linear parasitic capacitance, using genetic algorithm
826
Analysis of a class of Chua´s system
827
Analysis of a class of constrained nonlinear dynamic circuits
828
Analysis of a class of continuous-time algorithms for principal component analysis and subspace tracking
829
Analysis of a class of coupled microstrip lines in a nonhomogeneous dielectric media
830
Analysis of a class of cybernetic model and its stability on China´s urban-rural income gap
831
Analysis of a Class of Cylindrical Multiconductor Transmission Lines Using an Iterative Approaclh
832
Analysis of a class of decentralized decision processes: Quantized progressive second price auctions
833
Analysis of a class of decimated clock/data recovery architectures for serial links
834
Analysis of a class of dedicated observer schemes to sensor fault isolation
835
Analysis of a class of direct sampling receiver architectures from signal processing and system perspective
836
Analysis of a class of distributed asynchronous power control algorithms for cellular wireless systems
837
Analysis of a class of distributed directory algorithms
838
Analysis of a class of geometrically designed trellis codes for M-PSK
839
Analysis of a class of multimedia systems
840
Analysis of a class of nonlinear discrete systems using multidimensional modified
transforms
841
Analysis of a Class of Nonlinear Sampled-Data Systems with a Gaussian Input Signal
842
Analysis of a class of nonlinear systems in the presence of actuator saturation
843
Analysis of a class of nonlinear time-varying discrete systems using multidimensional parametric z-transfer functions
844
Analysis of a class of optimal control problems arising in cancer chemotherapy
845
Analysis of a Class of Pulse Modulated DC-to-DC Power Converters
846
Analysis Of A Class Of PWM Sinewave Inverters With High Frequency Link
847
Analysis of a class of real-time multiproduct lot scheduling policies
848
Analysis of a Class of Recovery Procedures
849
Analysis of a Class of Self-Biased Multimode Oscillators
850
Analysis of a class of star-interconnected networks
851
Analysis of a class of symmetrical thin-plate triangular antennas
852
Analysis of a Class of Ubiquitous Computing Systems
853
Analysis of a class of ZVT DC/DC converters based on pulse amplitude modulation controlled by duty cycle
854
Analysis of a Class-B Microwave-Photonic Link Using Optical Frequency Modulation
855
Analysis of a claw-pole synchronous machine for wind power conversion module
856
Analysis of a CLL Resonant Converter With Semi-Bridgeless Active Rectifier and Hybrid Control
857
Analysis of a closed loop control for current unbalance compensation based on Ac/Ac converters
858
Analysis of a Closed-slot PM machine
859
Analysis of a cluster feed for the Arecibo trireflector system using forward ray tracing and aperture integration
860
Analysis of a Coaxial Arbitrary-Shaped-Groove Cylindrical Waveguide for Wide-Band Gyro-TWTs
861
Analysis of a coaxial horn antenna using FDTD bidimensional method
862
Analysis of a coaxial line-circular waveguide junction used for measurement of materials
863
Analysis of a coaxial probe radiating through a thick uniaxial anisotropic two layer structure
864
Analysis of a coaxially fed monopole in a rectangular waveguide
865
Analysis of a coaxially-fed circular microstrip disk antenna
866
Analysis of a coaxial-to-waveguide adaptor including a discended probe and a tuning post
867
Analysis of a coaxial-to-waveguide adaptor incorporating a dielectric coated probe
868
Analysis of a coherent frequency-hopped spread-spectrum receiver in the presence of jamming
869
Analysis of a Collaborative Filter Based on Popularity Amongst Neighbors
870
Analysis of a comb filter using synchronously commutated capacitors
871
Analysis of a combined converter-electromagnetic device by taking into account its control loop
872
Analysis of a combined converter-electromagnetic device by taking into account its control loop
873
Analysis of a Combined Cycle Recovering Pressure Energy of Natural Gas
874
Analysis of a combined radial-axial magnetic bearing for a high-speed drive system
875
Analysis of a Commercial Biogas Generation System Using a Gas Engine–Induction Generator Set
876
Analysis of a commercial EEG device for the control of a robot arm
877
Analysis of a Commercial Wind Farm in Taiwan Part I: Measurement Results and Simulations
878
Analysis of a commercial wind farm in Taiwan Part I: Measurement results and simulations
879
Analysis of a commercial wind farm in Taiwan Part II: Different current-limit reactors and load tap changers on system performance
880
Analysis of a Commercial Wind Farm in Taiwan Part II: Different Current-Limit Reactors and Load Tap Changers on System Performance
881
Analysis of a common circuit structure for operating four power electronic converter circuits
882
Analysis of a Communications System Using Symbolic Simulation
883
Analysis of a Commutated Network
884
Analysis of a compact BCC transceiver based on PLL FSK modulator/demodulator
885
Analysis of a compact circular TE0,1 - rectangular TE0,2 waveguide mode converter
886
Analysis of a Compact Modulator Incorporating a Hybrid Silicon/Electro-Optic Polymer Waveguide
887
Analysis of a compact printed TPMS antenna in complex environment
888
Analysis of a compact slot resonator in the ground plane for microstrip structures
889
Analysis of a compact ultra-wideband antenna for radio frequency applications
890
Analysis of a complete 600 V-PT-IGBT structure using numerical device-simulation
891
Analysis of a complex activator-inhibitor equation
892
Analysis of a complex TSDC peak using single time relaxation peaks
893
Analysis of a complex waveguide structure for microwave wideband low cross-polar aperture antenna
894
Analysis of a complexity-based pruning scheme for classification trees
895
Analysis of a compliant mechanism with leverage and closed-loop structure based on matrix dimension-reduce method
896
Analysis of a composite amplifier technique for optimum noise performance
897
Analysis of a Compound Waveguide Slot Coupler Using the MPSTD Algorithm
898
Analysis of a Computational Biology Simulation Technique on Emerging Processing Architectures
899
Analysis of a computational model of dopamine synthesis and release through perturbation
900
Analysis of a concatenated coding scheme for a discrete multitone modulation system
901
Analysis of a concentrated winding induction machine for adjustable speed drive applications. I. Motor analysis
902
Analysis of a concentrated winding induction machine for adjustable speed drive applications. II. Motor design and performance
903
Analysis of a concentric coplanar capacitive sensor for nondestructive evaluation of multi-layered dielectric structures
904
Analysis of a conceptual automated rework facility for printed wiring assembly manufacturing systems
905
Analysis of a conflict between aggregation and interface negotiation in Microsoft´s Component Object Model
906
Analysis of a Conformal Archimedean Spiral Antenna Printed Within Layered Dielectric Cylindrical Media Using the Method of Moments
907
Analysis of a conformal cavity-backed patch antenna using a hybrid MoM/FEM technique
908
Analysis of a conformal microstrip antenna for microwave hyperthermia using FDTD
909
Analysis of a conical corrugated horn operating in the K-band with low cross-polarization and high aperture efficiency, and observing its radiation patterns
910
Analysis of a connection acceptance strategy for asynchronous transfer mode networks
911
Analysis of a constant frequency series-parallel multiresonant converter for high power and increased output voltages
912
Analysis of a constant voltage anemometer circuit
913
Analysis of a constrained forgetting factor recursive least squares algorithm in system identification
914
Analysis of a contact problem for tactile sensors and a computationally effective simulation for grasping
915
Analysis of a contribution from open source software to Virtual Training Systems
916
Analysis of a control mechanism for a variable speed processor
917
Analysis of a controllable LC-filter for compensation of specific harmonics
918
Analysis of a controlled 3-D piecewise-constant circuit with time-delayed feedback
919
Analysis of a cooperative and coalition formation game model among energy consumers in the Smart Grid
920
Analysis of a Cooperative Strategy for a Large Decentralized Wireless Network
921
Analysis of a coplanar waveguide with finite metallization thickness on an anisotropic multilayer substrate using method of lines
922
Analysis of a corner reflector antenna with a log-periodic dipole array feed
923
Analysis of a correlated queue in a communication system
924
Analysis of a correlated queue in a communication system
925
Analysis of a correlation coefficient of built-in diversity antennas for a portable telephone
926
Analysis of a correlation filter for thermal noise reduction in a MEMS gyroscope
927
Analysis of a corrugated coaxial waveguide resonator for mode rarefaction in a gyrotron
928
Analysis of a corrugated horn using the BOR-FDTD method
929
Analysis of a cost-effective remote sensing system for fruit monitoring
930
Analysis of a coupled inductor for zero-current transition boost converters
931
Analysis of a coupled patch antenna with application in personal communications
932
Analysis of a coupled problem: the FELIX cantilevered beam
933
Analysis of a coupled slotline on a double-layered substrate containing a magnetized ferrite
934
Analysis of a coupled waveguide circulator using non-reciprocal attenuation
935
Analysis of a covariance matching method for continuous-time errors-in-variables identification
936
Analysis of a Covariance Matching Method for Discrete-Time Errors-in-Variables Identification
937
Analysis of a CPW Fed Annular Slot Ring Antenna using DOE
938
Analysis of a CPW on electric and magnetic biaxial substrate
939
Analysis of a CPW-fed slot ring antenna
940
Analysis of a crab robot based on Jansen mechanism
941
Analysis of a credit manager for traffic regulation in a high speed network system with finite buffer
942
Analysis of a cross correlator with a clipper in one channel (Corresp.)
943
Analysis of a cross flow cooling scheme for an SSC collider dipole magnet
944
Analysis of a cross interferometer for airborne applications
945
Analysis of a Crossed-Film Cryoton Shift Register
946
Analysis of a Cross-Layer Hybrid-ARQ Scheme: Application to Unequal Packet Protection
947
Analysis of a CSMA/CA Optical Network with Application of Optical Buffers (FDLs) for Online Routing
948
Analysis of a Cumulative Results Sampling Plan for Use with Sampling Tables using Zero Acceptance Numbers
949
Analysis of a current fed voltage multiplier bridge for high voltage applications
950
Analysis of a Current Mode MOST-only D-A Converter
951
Analysis of a current pulse generator regulated by a square-loop ferrite core
952
Analysis of a current sensing and reporting tolerance in an inductor DCR sense topology
953
Analysis of a current source rectifier in transient and steady state
954
Analysis of a Current-Controlled Inverter-Fed Induction Motor Drive Using Digital Simulation
955
Analysis of a current-fed-type high-frequency inverter using a single reverse-conducting thyristor
956
Analysis of a current-regulated brushless DC drive
957
Analysis of a customer demand driven semiconductor supply chain in a distributed simulation test bed
958
Analysis of a cutoff priority cellular radio system with finite queueing and reneging/dropping
959
Analysis of a Cycloconverter-Induction Motor Drive System Allowing for Stator Current Discontinuities
960
Analysis of a cylindrical antenna containing an aperture coupled load
961
Analysis of a cylindrical cavity
962
Analysis of a cylindrical Cherenkov laser via particle simulation proposal of an improved 2-D model
963
Analysis of a Cylindrical Hybrid Positron Camera with Bismuth Germanate (BGO) Scintillation Crystals
964
Analysis of a Cylindrical Microstrip Antenna Fed By a Microstrip Line
965
Analysis of a cylindrical-rectangular microstrip structure with an airgap
966
Analysis of a damage sensor based on elastic-plastic metal coatings on optical fibers
967
Analysis of a DC chopper with paralleled IGBT based on an excitation circuit of a DC machine
968
Analysis of a D-C electromagnet with cutout switch
969
Analysis of a DC Power Supply to Regulate on an Open-Loop Basis
970
Analysis of a DC XY-actuator
971
Analysis of a DC/DC converter with wide ZVS range and low circulating current
972
Analysis of a decision directed beamformer
973
Analysis of a decision-directed phase-locked loop for binary partial response continuous phase modulation with index 0.5
974
Analysis of a decision-directed receiver with unknown priors
975
Analysis of a Deep Bar Induction Motor and Compressor Load During Start-Up
976
Analysis of a deeply saturated sensorless PMSynRel drive for an automotive application
977
Analysis of a defenseless ad hoc on demand Distance Vector routing protocol under routing disruption attacks
978
Analysis of a Delay-Constrained Hybrid ARQ Wireless System
979
Analysis of a Delay-Constrained Hybrid ARQ Wireless System
980
Analysis of a delay-dependent priority discipline in a multi-class traffic packet switching node
981
Analysis of a delay-dependent priority discipline in an integrated multiclass traffic fast packet switch
982
Analysis of a delayed delta modulator
983
Analysis of a Delayed SIR Epidemic Model
984
Analysis of a delayless subband adaptive filter
985
Analysis of a delayless subband adaptive filter structure
986
Analysis of a denial of service attack on TCP
987
Analysis of a derivative hybrid power filter in distorted voltage grid
988
Analysis of a design index for the service robot in a human-coexistence environment
989
Analysis of a Detection Technique for a Spinning-Goniometer Direction-Finding System
990
Analysis of a deterministic Manhattan network
991
Analysis of a device for converting a unipolar input voltage into two symmetric bidirectional output voltages with a magnetically coupled coil
992
Analysis of a Device-Free Passive Tracking System in Typical Wireless Environments
993
Analysis of a DFT-based watermarking algorithm
994
Analysis Of A Dielectric Channel Waveguide Diffused In An Anisotropic Substrate With A Gaussian-Gaussian Index Of Refraction Profile Using The Finite-Difference Method
995
Analysis of a dielectric EAP as smart component for a neonatal respiratory simulator
996
Analysis of a dielectric measuring circuit using commercial software
997
Analysis of a dielectric resonator antenna in a cylindrical conducting cavity: HEM modes
998
Analysis of a dielectric resonator antenna in a cylindrical conducting cavity: TE and TM modes
999
Analysis of a dielectrically loaded traveling wave tube
1000
Analysis of a Dielectric-Covered Waveguide Slot Antenna Using the Spectrum of Two-Dimensional Solutions
in a semi-infinite medium with an irregular boundary by means of network manipulators
transforms