Title List مقالات لاتين فني مهندسي Improving the realism in motion-based driving simulators by adapting tilt-translation technique to human perception Improving Voltage Regulation and Harmonic Elimination using Genetic Algorithm in PWM Choppers

بر اساس عنوان

1

Improving the realism in motion-based driving simulators by adapting tilt-translation technique to human perception

2

Improving the real-time behavior of ethernet networks using traffic smoothing

3

Improving the real-time behaviour of a multithreaded Java microcontroller by control theory and model based latency prediction

4

Improving the real-time efficiency of inertial SLAM and understanding its observability

5

Improving the Real-Time Response of an ADXL202 Accelerometer Placed in a Car Under Performance Tests by using Adaptive Filtering

6

Improving the reception quality of CMMB by utilizing TD-SCDMA networks

7

Improving the Recognition of Eating Gestures Using Intergesture Sequential Dependencies

8

Improving the recognition of faces occluded by facial accessories

9

Improving the recognition of near-miss events on NASA missions

10

Improving the recognition of pathological voice using the discriminant HLDA transformation

11

Improving the recognition performance by using a parallel-branch subunit model based on misrecognised data

12

Improving the Recognition Performance of NIALM Algorithms through Technical Labeling

13

Improving the Recommendation of Collaborative Filtering by Fusing Trust Network

14

Improving the Reconstruction Accuracy of GAs-Based NDE/NDT Methods through a Level Set Approach

15

Improving the rectenna recycling performance by using a wide-band band-pass prefilter

16

Improving the recursive multiplier

17

Improving the referrer-based Web log session reconstruction

18

Improving the region of attraction of ITER in the presence of actuator saturation

19

Improving the Regulation of Multi-Output Flyback Converters

20

Improving the Regulation Range of EV Battery Chargers With L3C2 Resonant Converters

21

Improving the relevance of search engine results by using semantic information from wikipedia

22

Improving the Reliability and Availability of Vehicular Communications Using Voronoi Diagram-Based Placement of Road Side Units

23

Improving the reliability and EMC performance in speed regulating system of asynchronous motor

24

Improving the reliability and safety of automotive electronics

25

Improving the reliability and the insulation properties of gate oxide in the gate injection mode by using a new procedure of (100) Si surface and Si/SiO₂ interface treatments

26

Improving the Reliability of a FPGA Using Fault-Tolerance Mechanism Based on Magnetic Memory (MRAM)

27

Improving the reliability of a newly-designed mobile phone by environmental tests and accelerated life tests

28

Improving the reliability of artificial intelligence planning systems by analyzing their failure recovery

29

Improving the reliability of breaker-and-a-half substations using sectionalized busbars

30

Improving the reliability of carbon nanotube based infrared sensors

31

Improving the Reliability of Concurrent Object-Oriented Software Designs

32

Improving the reliability of connections in cellular wireless environments via mobility tracking

33

Improving the reliability of decision tree and naive Bayes learners

34

Improving the Reliability of Digital Devices with Redundancy: An Application of Decision Theory

35

Improving the reliability of electrical drives through failure prognosis

36

Improving the reliability of embedded systems with cache and SPM

37

Improving the reliability of emergency response networks using revolvernet

38

Improving the reliability of event reports in wireless sensor networks

39

Improving the reliability of function point measurement: an empirical study

40

Improving the reliability of heuristic diagnosis

41

Improving the reliability of IEEE 802.11 broadcast scheme for multicasting in mobile ad hoc networks

42

Improving the reliability of IEEE 802.11 broadcast scheme for multicasting in mobile ad hoc networks

43

Improving the reliability of IEEE 802.11s based wireless mesh networks for smart grid systems

44

Improving the Reliability of JFFS2

45

Improving the reliability of mobile software systems through continuous analysis and proactive reconfiguration

46

Improving the Reliability of MPI Libraries via Message Flow Checking

47

Improving the reliability of name resolution mechanism in distributed operating systems

48

Improving the reliability of on-chip data caches under process variations

49

Improving the reliability of on-chip L2 cache using redundancy

50

Improving the reliability of operation Microgrids

51

Improving the reliability of operation of power systems

52

Improving the Reliability of Particle Accelerator Magnets: Learning From Our Failures

53

Improving the reliability of personal navigation devices in harsh environments

54

Improving the reliability of power distribution systems through single-phase tripping

55

Improving the reliability of power systems with more accurate grounding system resistance estimates

56

Improving the reliability of quad flat no-lead packages through test & structural optimization

57

Improving the reliability of radar T/R module with precise cleaning technology

58

Improving the reliability of RO PUF using frequency offset

59

Improving the Reliability of Series Resonant Inverters for Induction Heating Applications

60

Improving the reliability of shape comparison by perturbation

61

Improving the Reliability of the K-Best algorithm for MIMO detection with ordering

62

Improving the reliability of the label distribution protocol

63

Improving the reliability of the plastic IC package in reflow soldering process by optimization

64

Improving the reliability of transformer gas-in-oil diagnosis

65

Improving the reliability of WiDom in a single broadcast domain

66

Improving the reliability of wind turbine generation and its impact on overall distribution network reliability

67

Improving the reliability of wireless body area networks

68

Improving the Reliability of Wireless Networks Using Cognitive Radios

69

Improving the reliability, the robustness and the performance of a three phase GTO voltage source inverter

70

Improving the Remote Control of a Mobile Robot Using Positioning and Ubiquitous Techniques

71

Improving the repetition rate of Tm-doped fiber saturable absorber based passive Q-switching

72

Improving the requirements engineering process for an electronic clearinghouse

73

Improving the resilience in IP networks

74

Improving the Resilience of Emerging Generation GMPLS Networks

75

Improving the Resilience of UAV in Non-segregated Airspace Using Multiagent Paradigm

76

Improving the resiliency of Ariadne

77

Improving the Resistance of Grain-V1 against Algebraic Attack

78

Improving the Resistance to Side-Channel Attacks on Cloud Storage Services

79

Improving the resistive switching reliability via controlling the resistance states of RRAM

80

Improving the resistive switching uniformity of forming-free TiO2−x based devices by embedded Pt nanocrystals

81

Improving the resistivity variation in multi-layer heaters for use in dispenser cathodes

82

Improving the Resolution Advisory Reversal Logic of the Traffic Alert and Collision Avoidance System

83

Improving the resolution and stability of diagnostic systems

84

Improving the resolution capability of the parametric power spectrum density on the base of an additive linear prediction process

85

Improving the resolution of a sensor array pattern by neural networks

86

Improving The Resolution Of Acoustic Delay Lines

87

Improving the resolution of bearing in passive sonar arrays by eigenvalue analysis

88

Improving the resolution of infrared images of the breast

89

Improving the resolution of Lazzaro winner-take-all circuit

90

Improving the resolution of Non-Invasive Time Domain Reflectometry

91

Improving the resolution of selected ADCs

92

Improving the Resolution of Single-Delay-Fault Diagnosis

93

Improving the resolution performance of eigenstructure-based direction-finding algorithms

94

Improving the resolution scalability of orientation adaptive wavelets

95

Improving the resource utilization in grid environment using Aging Technique

96

Improving the Response of a Rollover Sensor Placed in a Car under Performance Tests by Using Optimal Signal Processing Techniques

97

Improving the response of a wheel speed sensor by using frequency-domain adaptive filtering

98

Improving the response of optical phase modulators in SOI by computer simulation

99

Improving the response of SMA actuators

100

Improving the response of wheel speed sensors by using robust and optimal signal processing techniques

101

Improving the response time analysis of global fixed-priority multiprocessor scheduling

102

Improving the response time of a switching regulator using sensit and design/ASTAP

103

Improving the Response Time of Business Processes: An Alert-Based Analytical Approach

104

Improving the Responsiveness of Replicated Virtualized Services in Case of Overloaded Replicas Connectivity

105

Improving the Results and Performance of Clustering Bit-encoded XML Documents

106

Improving the Retailers Profit for CRM Using Data Mining Techniques

107

Improving the Retention and Endurance Characteristics of Charge-Trapping Memory by Using Double Quantum Barriers

108

Improving the retrieval of key biophysical parameters used in climate modeling from POLDER hot spot measurements

109

Improving the retrieval performance by using distance-based bigram

110

Improving the retrieval performance of content-based image retrieval systems: the GIVBAC approach

111

Improving the reusability of frequency converter software by using the structured analysis method

112

Improving the reusability of program specification through data flow modeling

113

Improving the Reuse of ScientificWorkflows and Their By-products

114

Improving the Revenue, Efficiency and Reliability in Data Center Spot Market: A Truthful Mechanism

115

Improving the reverse blocking capability of carrier stored trench-gate bipolar transistor

116

Improving the reverse link capacity of CDMA systems using macrodiversity

117

Improving the RF performance of 0.18 μm CMOS with deep n-well implantation

118

Improving the RF Performance of Clamshell Handsets

119

Improving the road network performance with dynamic route guidance by considering the indifference band of road users

120

Improving the robustness and accuracy of the marching cubes algorithm for isosurfacing

121

Improving the robustness and reliability of object-oriented programs through exception analysis and testing

122

Improving the robustness in feature detection by local contrast enhancement

123

Improving the Robustness of a Parallel Robot Using Predictive Functional Control (PFC) Tools

124

Improving the Robustness of a Softcore Processor against SEUs by Using TMR and Partial Reconfiguration

125

Improving the robustness of a surface integral formulation for wideband impedance extraction of 3D structures

126

Improving the robustness of a switch box in a mesh of clusters FPGA

127

Improving the Robustness of Cotton Status Characterisation by Radiative Transfer Model Inversion of Multi-Angular CHRIS/PROBA Data

128

Improving the robustness of data-driven fuzzy systems with regularization

129

Improving the robustness of DCT-based image watermarking against JPEG compression

130

Improving the Robustness of Distributed Failure Detectors in Adverse Conditions

131

Improving the Robustness of Distributed Range-Based Localisation Algorithms

132

Improving the robustness of example-based dialog retrieval using recursive neural network paraphrase identification

133

Improving the robustness of generalized predictive controllers. Application to a heat exchanger

134

Improving the robustness of gradient vector flowin cluttered images

135

Improving the robustness of H_∞-PSSs using the polynomial approach

136

Improving the robustness of image-based tracking to control 3D robot motions

137

Improving the robustness of ISOMAP by de-noising

138

Improving the Robustness of Local Network Alignment: Design and Extensive Assessmentof a Markov Clustering-Based Approach

139

Improving the Robustness of Location-Based Routing for Underwater Sensor Networks

140

Improving the robustness of MPEG-4 video communications over wireless/3G mobile networks

141

Improving the Robustness of Multivariable Linear Quadratic Regulator via Parametric Design

142

Improving the robustness of NaÃ¯ve Physics airflow mapping, using Bayesian reasoning on a multiple hypothesis tree

143

Improving the robustness of Newton-based power flow methods to cope with poor initial points

144

Improving the robustness of noisy MFCC features using minimal recurrent neural networks

145

Improving the robustness of particle filter-based visual trackers using online parameter adaptation

146

Improving the Robustness of Persian Large Vocabulary Continuous Speech Recognition System for Real Applications

147

Improving the Robustness of Private Information Retrieval

148

Improving the robustness of prosody dependent language modeling based on prosody syntax dependence

149

Improving the Robustness of Single-View Ear-Based Recognition under a Rotated in Depth Perspective

150

Improving the Robustness of Stationary Kalman Filter via Parametric Design

151

Improving the robustness of Surface Enhanced Raman Spectroscopy based sensors by Bayesian Non-negative Matrix Factorization

152

Improving the robustness of target cell search in WCDMA using interference cancellation

153

Improving the Robustness of the G.722 Wideband Speech Codec to Packet Losses for Voice Over Wlans

154

Improving the robustness of the RARE algorithm against subarray orientation errors

155

Improving the robustness of wavelet transform for epoch detection

156

Improving the robustness of winner-take-all cellular neural networks

157

Improving the Robustness of Wireless Device Pairing Using Hyphen-Delimited Numeric Comparison

158

Improving the Robustness Properties of Robot Localization Procedures with Respect to Environment Features Uncertainties

159

Improving the Robustness to the Uncertainty of Initial Depth Estimation in Monocular SLAM

160

Improving the ROM of wrist movements in stroke patients by means of a haptic wrist robot

161

Improving the ROM of wrist movements in stroke patients by means of a haptic wrist robot

162

Improving the rotational and transient performance of magnetic bearings by the H_∞ DIA control

163

Improving the rotor position estimation in permanent-magnet synchronous machines with a low-resolution position sensor

164

Improving the route network based on the analysis of the passenger flows

165

Improving the routing and addressing of IP

166

Improving the routing performance of KAD through social network analysis

167

Improving the RTR Growing Functional Module

168

Improving the running time of the nearest neighbor algorithm

169

Improving the S.I. - Simpler is better

170

Improving the safety of ankle-foot rehabilitation system with hybrid control

171

Improving the safety of AUVs

172

Improving the safety of human-robot cooperation with control of joint stiffness

173

Improving the Safety of Patient-Controlled Analgesia Infusions with Safety Interlocks and Closed-Loop Control

174

Improving the safety of pedestrians by using a cooperative system

175

Improving the safety performance of Power Grid equipment and installations using informational feedback

176

Improving the Sage Algorithm with Adaptive Partial Interference Cancellation

177

Improving the sample complexity using global data

178

Improving the satellite communication efficiency of the accumulative acknowledgement strategies

179

Improving the saturated efficiency of TWT C-band

180

Improving the Scalability of a Hurricane Forecast System in Mixed-Parallel Environments

181

Improving the scalability of an application-level group communication protocol

182

Improving the Scalability of an Operational Scientific Application in a Large Multi-core Cluster

183

Improving the scalability of checkpoint recovery for networks-on-chip

184

Improving the Scalability of Communication-Aware Task Mapping Techniques

185

Improving the Scalability of Data Center Networks with Traffic-aware Virtual Machine Placement

186

Improving the scalability of fault-tolerant database clusters

187

Improving the Scalability of Geo-replication with Reservations

188

Improving the scalability of lightpath assignment algorithms in dynamic networks

189

Improving the Scalability of P2P Streaming Based on Fine-Grained Balancing Scheme

190

Improving the scalability of parallel algorithms for hyperspectral image analysis using adaptive message compression

191

Improving the Scalability of Parallel Jobs by adding Parallel Awareness to the Operating System

192

Improving the Scalability of PrivacyCAs

193

Improving the scalability of SAMBA bus architecture

194

Improving the scalability of shared cache multi-core systems

195

Improving the scalability of transparent checkpointing for GPU computing systems

196

Improving the scan performance of probe-fed microstrip patch arrays on high dielectric constant substrates

197

Improving the scan rate and image quality in tapping Mode Atomic Force Microscopy with piezoelectric shunt control

198

Improving the Scavenged Power of Nonlinear Piezoelectric Energy Harvesting Interface at Off-Resonance by Introducing Switching Delay

199

Improving the SCC protocol for real-time transaction concurrency control

200

Improving the Schedulability of Sporadic Self-Suspending Soft Real-Time Multiprocessor Task Systems

201

Improving the schedule quality of static-list time-constrained scheduling

202

Improving the Scheduling Strategies in Dynamic Modeling by Using Compound Number

203

Improving the scope of deformable model shape and motion estimation

204

Improving the sea surface wind retrieval algorithm for NASA scatterometers using atmospheric boundary layer models

205

Improving the Search Mechanism for Unstructured Peer-to-Peer Networks Using the Statistical Matrix Form

206

Improving the search performance of SHADE using linear population size reduction

207

Improving the secrecy rate of wireless SIMO systems via two-step transmission

208

Improving the Secrecy Rate via Combining the Artificial Noise with the Masked Beamforming Scheme

209

Improving the Secure Socket Layer Protocol by modifying its Authentication function

210

Improving the security of a dynamic look-up table based chaotic cryptosystem

211

Improving the security of Android inter-component communication

212

Improving the Security of Chaotic Synchronization With a $\\Delta$ -Modulated Cryptographic Technique

213

Improving the Security of Cryptographic Protocol Standards

214

Improving the Security of Dual Rail Logic in FPGA Using Controlled Placement and Routing

215

Improving the Security of LBlock Lightweight Algorithm Using Bit Permutation

216

Improving the security of McEliece-like public key cryptosystem based on LDPC codes

217

Improving the Security of Non-PKI Methods for Public Key Distribution

218

Improving the security of SNMP in wireless networks

219

Improving the security of subtransmission systems by use of temporary insertion of series and shunt reactances

220

Improving the Security of the Chien-Jan Protocol for Large Mobile Networks

221

Improving the security of the distributed enterprise data warehouse system

222

Improving the Security of the Shi Reversible Data Hiding Algorithm

223

Improving the Security of Time Synchronization in WSN

224

Improving the security of watermark public detectors

225

Improving the security of wireless LANs by managing 802.1x disassociation

226

Improving the security performance in mobile wireless computing network using smart directional antenna

227

Improving the selection and detection of visual landmarks through object tracking

228

Improving the selectivity of a metal oxide nanowire gas sensor using a microhotplate/FET platform

229

Improving the selectivity of awareness information in groupware applications

230

Improving the selectivity of range query for image databases based on a probabilistic framework

231

Improving the Sensing–Throughput Tradeoff for Cognitive Radios in Rayleigh Fading Channels

232

Improving the Sensitivity and Bandwidth of In-Plane Capacitive Microaccelerometers Using Compliant Mechanical Amplifiers

233

Improving the sensitivity and phased array response of FMCW radar for imaging avalanches

234

Improving the sensitivity and selectivity of alcohol sensors based on organic thin-film transistors by using chemically-modified dielectric interfaces

235

Improving the sensitivity in magnetorelaxometry imaging of magnetic nanoparticles

236

Improving the Sensitivity of Deadlines with a Specific Asynchronous Scenario for Harmonic Periodic Tasks scheduled by FP

237

Improving the sensitivity of direct-detection optical OFDM systems by pairing of the optical subcarriers

238

Improving the Sensitivity of Elastic Capacitive Pressure Sensors Using Silver Nanowire Mesh Electrodes

239

Improving the sensitivity of PMOS dosimeters using dual dielectrics

240

Improving the Sensitivity of SPR Sensing Using MAP Information Fusion Algorithm

241

Improving the sensitivity of switches with linear feedback

242

Improving the Sensitivity of the Si3N4 Gate pH-ISFET using Modified Processing Techniques

243

Improving the sensitivity verification method of the UHF PD detection technique for GIS

244

Improving the separability of a reservoir facilitates learning transfer

245

Improving the Separability of Motor Imagery EEG Signals Using a Cross Correlation-Based Least Square Support Vector Machine for Brain–Computer Interface

246

Improving the separation of non-functional concerns in requirements artifacts

247

Improving the Separation of Parallel Code in Skeletal Systems

248

Improving the sequence of robotic tasks with freedom of execution

249

Improving the service life of zinc alloy diecastings

250

Improving the service quality of EDP distribution; An independent review and assessment by Kema

251

Improving the servo performance of mechatronic system by acceleration feedback

252

Improving the shielding effectiveness of a board-level shield by bonding it with the waveguide-below-cutoff principle

253

Improving the Shim´s AuthA Password-Authenticated Key Agreement Protocol

254

Improving the short-term stability of laser pumped Rb clocks by reducing the effects of the interrogation oscillator

255

Improving the Short-Wavelength Spectral Response of Silicon Solar Cells by Spray Deposition of YVO₄:Eu³⁺ Downshifting Phosphor Nanoparticles

256

Improving the Shuffle of Hadoop MapReduce

257

Improving the sidelobes of arrays fed by multiple-beam beam formers

258

Improving the sidewall quality of nanosecond laser-drilled deep through-silicon vias by incorporating a wet chemical etching process

259

Improving the signal data acquisition in condition monitoring of electrical machines

260

Improving the signal data acquisition in condition monitoring of electrical machines

261

Improving the signal to noise of FIR polarimetry on constrained-access plasma experiments

262

Improving the signal to noise ratio of event-related EEG signals in high risk newborns

263

Improving the signal-to-noise ratio in recordings with thin-film longitudinal intra-fascicular electrodes using shielding cuffs

264

Improving the signal-to-noise ratio of event-related optical signals

265

Improving the significance of probabilistic circuit fault emulations

266

Improving the simulation model building process through guidance and feedback

267

Improving the SIS18 performance by use of the Orbit Response Method

268

Improving the Size of Communication Buffers in Synchronous Models With Time Constraints

269

Improving the Small Signal Stability of a PV-DE-Dynamic Load-Based Microgrid Using an Auxiliary Signal in the PV Control Loop

270

Improving the snapshot routing performance through reassigning the inter-satellite links

271

Improving the SNR of the underwater acoustic signal affected by wind driven ambient noise using RLS algorithm

272

Improving the social capital of trust-based competitive Multi-Agent Systems by introducing meritocracy

273

Improving the Soft Error Resilience of the Register Files Using SRAM Bitcells with Built-In Comparators

274

Improving the software architecture of private switching systems using object-oriented techniques

275

Improving the software development process using testability research

276

Improving the software engineering process

277

Improving the Software Factory Contracting Process in the Public Area: The Rio de Janeiro City Hall´s Experience

278

Improving the solder joint reliability of VQFN packages

279

Improving the solderability and electromigration behavior of Low-Ag SnAgCu soldering

280

Improving the soliton communication system by adjusting the detection window

281

Improving the sound quality of an electronic voice box

282

Improving the sound quality of an electronic voice box

283

Improving the spatail resolution based on 4D light field data

284

Improving the Spatial Consistency of the Assignment of Base Stations to Controllers in Cellular Networks

285

Improving the spatial resolution and image noise in densely pixilated detectors for positron emission mammography

286

Improving the spatial resolution and image noise in densely pixilated detectors for positron emission mammography

287

Improving the Spatial Resolution of an OFDR Based on Recirculating Frequency Shifter

288

Improving the spatial resolution of intravascular ultrasound imaging with synthetic aperture Fourier-based methods

289

Improving the Spatial Resolution of Landsat TM/ETM+ Through Fusion With SPOT5 Images via Learning-Based Super-Resolution

290

Improving the Spatial Resolution of Magneto Resistive Sensors via Deconvolution

291

Improving the spatial resolution of real-time radiography images using the maximum entropy method

292

Improving the Spatial Resolution of Synthetic Aperture Radiometer Imagery using Auxiliary Information: Application to the Smos Mission

293

Improving the spatial resolution of the microPET scanner by wobbling the bed

294

Improving the spatial reuse of IEEE 802.11 WLAN by adaptive carrier sense threshold of access points based on node positions

295

Improving the specification of the WiMax ARQ operation

296

Improving the Specifications for Power-Line Filters

297

Improving the specificity and stability of label-free optical biosensors

298

Improving The Spectral Efficiency For The Ofdm System Using The Time And Frequency Domain Equalization

299

Improving the Spectral Efficiency of Adaptive Modulation in Amplify-and-Forward Cooperative Relay Networks with an Adaptive ARQ Protocol

300

Improving the Spectral Efficiency of Amplify-and-Forward Cooperative Relay Network with Adaptive M-QAM Modulation

301

Improving the spectral efficiency of FDM-CPM systems through packing and multiuser processing

302

Improving the spectral efficiency of linear modulations through time-frequency packing

303

Improving the spectral efficiency of multiuser OFDM system with V_BLAST architecture by adaptive resource allocation

304

Improving the Spectral Efficiency of Nonlinear Satellite Systems through Time-Frequency Packing and Advanced Receiver Processing

305

Improving the spectrum sensing performance in cognitive radio networks using the stochastic resonance approach

306

Improving the speech quality of cellular mobile systems under heavy fading

307

Improving the Speech Quality of VoIP by Packet Prioritization

308

Improving the Speech Quality with OSC: Double Full-Rate Performance Assessment

309

Improving the speed and performance of adaptive equalizers via transform based adaptive filtering

310

Improving the speed and power of compilable SRAM using dual-mode self-timed technique

311

Improving the speed and scalability of distributed simulations of sensor networks

312

Improving the speed of 3D information presentation in a microhabitat

313

Improving the Speed of a Class of Single Frequency Estimation Algorithms

314

Improving the speed of convergence of a maximum-likelihood motion estimation algorithm of a human face

315

Improving the speed of convergence of GMRES for certain perturbed tridiagonal systems

316

Improving the speed of convex hull calculations

317

Improving the speed of CORS Network RTK ambiguity resolution

318

Improving the speed of decimal division

319

Improving the Speed of Kernel PCA on Large Scale Datasets

320

Improving the Speed of Parallel Decimal Multiplication

321

Improving the speed of the Method of Moments technique in large body scattering problems using the sparse matrix method

322

Improving the speed of the network intrusion detection

323

Improving the Speed of Virtual Rear Projection: A GPU-Centric Architecture

324

Improving the Sphere-Packing Bound for binary codes over memoryless symmetric channels

325

Improving the Spherical Harmonics Expansion-Based Multilevel Fast Multipole Algorithm (SE-MLFMA)

326

Improving the spurious free dynamic range of DSP radios

327

Improving the spurious performance of a digitised array receiver

328

Improving the SRW Waveform via a Physical Layer Retrofit

329

Improving the stability and accuracy of the Yb optical lattice clock

330

Improving the stability and fuel economy for Belt-Starter Generator Mild HEV at idle speed using model predict control

331

Improving the stability in overlay and native networks

332

Improving the stability of algebraic curves for applications

333

Improving the stability of amorphous silicon tandem cells

334

Improving the Stability of Cardiac Mechanical Simulations

335

Improving the Stability of Cascaded DC/DC Converter Systems via Shaping the Input Impedance of the Load Converter With a Parallel or Series Virtual Impedance

336

Improving the Stability of Cellulase by Immobilization on Chitosan-Coated Magnetic Nanoparticles Modified alpha-Ketoglutaric Acid

337

Improving the stability of distributed-feedback tapered master-oscillator power-amplifiers

338

Improving the stability of eXplicit Control Protocol under heterogeneous delays

339

Improving the stability of gait planning for quadruped robots

340

Improving the stability of on-chip automatic tuning loops for continuous-time filters with an analog adaptive controller

341

Improving the stability of power factor correcting converters using a positive current feedforward compensator

342

Improving the stability of spanning trees for application-layer multicast

343

Improving the Stability of the DFT Error Recovery Codes by Using the Vandermonde Fast Decoding Algorithm

344

Improving the stability of the mobile radio power amplifier

345

Improving the stability of the system west Algerian network (2012) by inserting renewable energy source

346

Improving the stability properties of the zeros of sampled systems with fractional order hold

347

Improving the stable period of WSN using dynamic Stable leach Election Protocol

348

Improving the standard coding system for deep space missions

349

Improving the start and restart behavior through state recognition of AC drives

350

Improving the starting performance of large salient-pole synchronous machines

351

Improving the Starting Torque in External-Rotor Induction Motors Using an Outer Can

352

Improving the starting torque in external-rotor induction motors using an outer can

353

Improving the startup time of digital TV

354

Improving the Statement of the Corrective Security-Constrained Optimal Power-Flow Problem

355

Improving the Static Analysis Conformance of BPEL Engines with BPELlint

356

Improving the static analysis of loops by dynamic partitioning techniques

357

Improving The Static Stability Of A Mobile Manipulator Using Its End Effector In Contact With The Ground

358

Improving the Statistical Arbitrage Strategy in Intraday Trading by Combining Extreme Learning Machine and Support Vector Regression with Linear Regression Models

359

Improving the statistical properties of number sequences produced by pseudorandom generators derived from the Rényi chaotic map

360

Improving the Steady-State Response of Full-Digital Pneumatic Motor Speed Control Using Two-Step Current Control Scheme

361

Improving the steering efficiency of 1×4096 opto-VLSI processor using direct power measurement method

362

Improving the stopband of microstrip parallel-coupled line bandpass filters using partially coupled resonators

363

Improving the stopband of the UWB bandpass filter with a novel compact 1-cell CRLHTL geometry with additional nulls

364

Improving the storage performance of smartphones through journaling in non-volatile memory

365

Improving the streaming capacity in P2P VoD systems with helpers

366

Improving the streaming experience of large personal music libraries to mobile devices

367

Improving the structuring search space method for accelerating large set character recognition

368

Improving the stuck-at fault coverage of functional test sequences by using limited-scan operations

369

Improving the student academic experience through lean engineering principles

370

Improving the subjective quality of low bit rate subband/wavelet coded images

371

Improving the success of recombination by varying broodsize and sibling rivalry

372

Improving the Success Rate of Concurrent Mobile Transactions by Predicting Time for Execution

373

Improving the suitability of imperfect transcriptions for information retrieval from spoken documents

374

Improving the supply chain efficiency based on reliability analysis

375

Improving the support to decision making in medium-sized urban emergencies

376

Improving the support vector machine-based method to map urban land of China using DMSP/OLS and SPOT VGT data

377

Improving the surface wave efficiency and gain of a microstrip patch using a bi-phase hologram

378

Improving the survivability of a simple evolved circuit through co-evolution

379

Improving the Survivability of WSNs with Biological Characters Based on Rejuvenation Technology

380

Improving the Sustainability of Autonomous Systems

381

Improving the SVDD Approach to Hyperspectral Image Classification

382

Improving the switching performance of a wavelength-tunable laser transmitter using a simple and effective driver circuit

383

Improving the symmetry of radiation patterns for offset reflectors illuminated by matched feeds

384

Improving the system architecting process through the use of Lean tools

385

Improving the System Capacity by Client Cooperation in Distributed File Service

386

Improving the system capacity of a cellular network with partial power equalization

387

Improving the system capacity of broadband services using multiple high-altitude platforms

388

Improving the system capacity of mm-wave broadband services using multiple high altitude platforms

389

Improving the system capacity using directional antennas with a fixed beam on small Unmanned Aerial Vehicles

390

Improving the system unbalance and losses of distribution feeders based on transformer rearrangement

391

Improving the system/software engineering interface for complex system development

392

Improving the System-on-a-Chip Performance for Mobile Systems by Using Efficient Bus Interface

393

Improving the Table Boundary Detection in PDFs by Fixing the Sequence Error of the Sparse Lines

394

Improving the target impedance method for PCB decoupling of core power

395

Improving the Task Stealing in Intel Threading Building Blocks

396

Improving the TCPA specification

397

Improving the teaching of Computer Networks through the incorporation of industry based training courses

398

Improving the Teaching of Discrete-Event Control Systems Using a LEGO Manufacturing Prototype

399

Improving the teaching of programming using a VLE enhanced with learning objects

400

Improving the Technical Infrastructure of a Programming Course

401

Improving the technical quality of a universal motor using an evolutionary approach

402

Improving the technology for humanitarian demining

403

Improving the Television Horizontal Oscillator

404

Improving the temperature sensitivity of LCOS-based SLM

405

Improving the temporal resolution of 3D phase contrast MR angiography using keyhole technique at low tesla open-MRI system

406

Improving the Temporal Resolution of Magnetic Induction Tomography for Molten Metal Flow Visualization

407

Improving the temporal resolution of tomographic images using a PI-line based backprojection filtration algorithm

408

Improving the temporal response of computed tomography fluoroscopy with optimized halfscan

409

Improving the Test of NoC-Based SoCs with Help of Compression Schemes

410

Improving the test quality for scan-based BIST using a general test application scheme

411

Improving The Testability Of Finite State Machines Implemented By EPLD´s

412

Improving the testability of mixed-signal integrated circuits

413

Improving the testability of UML class diagrams

414

Improving the testability of VLSI circuits through partitioning

415

Improving the testing process by program static analysis

416

Improving the tests coverage of a medium voltage protection device using system simulation approaches

417

Improving the Tevatron Collision Helix

418

Improving the Textural Model of the Hepatocellular Carcinoma Using Dimensionality Reduction Methods

419

Improving the theory of truth table verification of iterative logic arrays

420

Improving the thermal and mechanical properties of epoxy resins for electronic packaging

421

Improving the thermal and mechanical properties of silicon resin with functionalized graphene for electronic packaging

422

Improving the thermal conductivity of epoxy resins with mesogenic units for electronic packaging

423

Improving the thermal management of AC-DC converters using integration technologies

424

Improving the thermal stability of 1-3 piezoelectric composite transducers

425

Improving the thermal stability of 1-3 piezoelectric composite transducers manufactured using thermally conductive polymeric fillers

426

Improving the thermomechanical behavior of lead free solder joints by controlling the microstructure

427

Improving the threshold of the minimum-norm frequency detection method

428

Improving the threshold performance of higher-order direction finding methods via pseudorandomly generated estimator banks

429

Improving the threshold performance of the estimator bank direction finding techniques using outlier identification and cure

430

Improving the Thresholds of Sparse Recovery: An Analysis of a Two-Step Reweighted Basis Pursuit Algorithm

431

Improving the throughput and delay performance of network processors by applying push model

432

Improving the throughput of a low-Earth orbit microsatellite protocol

433

Improving the throughput of Ad-Hoc wireless LANs by IEEE802.11 DCF function protocol

434

Improving the Throughput of an ARQ Stop and Wait Scheme for Burst Noise Channels

435

Improving the throughput of cognitive radio networks using the broadcast approach

436

Improving the throughput of DS-CDMA systems using adaptive rate transmissions based on variable spreading factors

437

Improving the throughput of flexible-precision DSPS via algorithm transformation

438

Improving the Throughput of On-line Addition for Data Streams

439

Improving the throughput of point-to-multipoint ARQ protocols through destination set splitting

440

Improving the throughput of smart phone audio-jack based gateway for sensor networks

441

Improving the throughput of synchronization by insertion of delays

442

Improving the throughput of the AES algorithm with multicore processors

443

Improving the Throughput of Wireless LAN by Tuning Carrier Sense Threshold of Access Points Based on Node Positions Detected by a Visible Light Tag System

444

Improving the throughput of wireless powered dual-hop systems with full duplex relaying

445

Improving the Throughput Performance of IEEE 802.11 Distributed Coordination Function

446

Improving the time efficiency of QTA anti-collision algorithm

447

Improving the time of live migration virtual machine by optimized algorithm scheduler credit

448

Improving the time resolution of schedules generated via Lagrangian relaxation algorithms

449

Improving the Time Resolution of TOF-PET Detectors by Double-Sided Readout

450

Improving the Time Response of MEMS Switches for RF Applications

451

Improving the Tolerance of Pipeline Based Circuits to Power Supply or Temperature Variations

452

Improving the topografiner technology down to nanometer spatial resolution

453

Improving the topological resilience of mobile ad hoc networks

454

Improving the torque output in radial- and axial-flux permanent-magnet synchronous machines with concentrated windings by using a combined wye-delta connection

455

Improving the Torque Prediction of Saturated Automotive Drive Machines by Accurate Representation of Saturated $B/H$ Curves

456

Improving the Torque Ripple in DTC of PMSM Using Fuzzy Logic

457

Improving the torque ripple in SRMs utilizing RST

458

Improving the total rotation vector estimation via a bistatic isar system

459

Improving the toughness and thermal properties of epoxy resin using for electronic packaging by interpenetrating polymer network

460

Improving the traceability of coaxial impedance measurements at lower RF in the UK

461

Improving the Traceable Measurement and Generation of Small Direct Currents

462

Improving the tracking ability of KRLS using Kernel Subspace Pursuit

463

Improving the Tracking Capability of Adaptive Filters via Convex Combination

464

Improving the Traffic Data Imputation Accuracy Using Temporal and Spatial Information

465

Improving the Traffic Prediction Capability of Neural Networks Using Sliding Window and Multi-task Learning Mechanisms

466

Improving the traffic responsiveness of signal controllers using fuzzy logic

467

Improving the training and evaluation efficiency of recurrent neural network language models

468

Improving the training and testing speed and the ability of generalization in learning vector quantization-DVQ

469

Improving the training speed of three-layer feedforward neural nets by optimal estimation of the initial weights

470

Improving the transcoding capability of speech coders

471

Improving the Transcription of Academic Lectures for Information Retrieval

472

Improving the transform domain ECG denoising performance by applying interbeat and intra-beat decorrelating transforms

473

Improving the transient emission performance of a Diesel engine by input shaping techniques

474

Improving the transient frequency response of islands using generation tripping

475

Improving the transient frequency response of unintentional islands via local optimal controllers

476

Improving the transient performance in robotics force control using nonlinear damping

477

Improving the transient performance of a high penetration of LV connected microgeneration

478

Improving the transient performance of doubly fed induction generators when submitted to voltage sags

479

Improving the transient response in backstepping control designs: Application to robotic manipulators

480

Improving the transient response of magnetic bearings by the H_∞ DIA control

481

Improving the Transient Response of Television Receivers

482

Improving the Transient Response of Television Receivers

483

Improving the transient-response characteristics of pulse filters with parabolic distribution of poles

484

Improving the Transition Fault Coverage of Functional Broadside Tests by Observation Point Insertion

485

Improving the transmission efficiency in the mobile communication systems using turbo codes

486

Improving the transparency in fuzzy modelling of radiotherapy margins in cancer treatment

487

Improving the transparency of a rehabilitation robot by exploiting the cyclic behaviour of walking

488

Improving the Transparency of Teleoperating System

489

Improving the transport properties of gas-filled focusing cells for electron-beam radiography

490

Improving the treatment of mixed-terrain paths of the recommendation ITU-R P.1546 for the path-loss prediction of short UHF links

491

Improving the Trustworthiness of Medical Device Software with Formal Verification Methods

492

Improving the tuning of first-order autoregressive model for the estimation of amplify and forward relay channel

493

Improving the ultra-low-power performance of IEEE 802.15.6 by adaptive synchronisation

494

Improving the UML consistency using Text Semantic Similarity approach

495

Improving the Uncertainty Analysis of NIST´s Pulse Parameter Measurement Service

496

Improving the Understandability of Speech Synthesis by Modeling Speech in Noise

497

Improving the understanding of hurricanes: Visualizing storm surge

498

Improving the Understanding of Mooring Motion in Current Measurements Using High-resolution Diagnostic Records

499

Improving the uplink data rate of portable devices in broadband systems with relaying

500

Improving the Uplink Performance of Drive-Thru Internet via Platoon-Based Cooperative Retransmission

501

Improving the Upper Bounds on the Covering Radii of Binary Reed–Muller Codes

502

Improving the upper bounds on the covering radii of Reed-Muller codes

503

Improving the Usability of a Virtual Assembly Environment with the Integration of Multi-sensory Feedback

504

Improving the Usability of an Approach for Visually Supporting the Creation of Personal Development Plans

505

Improving the Usability of E-Commerce Applications using Business Processes

506

Improving the Usability of HL7 Information Models by Automatic Filtering

507

Improving the usability of online information when translated from English to Chinese

508

Improving the usability of remote eye gaze tracking for human-device interaction

509

Improving the usage of temperature sensors for motor thermal protection

510

Improving the use case driven approach to requirements engineering

511

Improving the use of advisor networks for multi-agent trust modelling

512

Improving the use of force sensing resistors arrays for the measure of hand grasp

513

Improving the use of vibro-acoustography for brachytherapy metal seed imaging: A feasibility study

514

Improving the User Story Agile Technique Using the INVEST Criteria

515

Improving the Utility of Differentially Private Data Releases via k-Anonymity

516

Improving the UWB Pulseshaper Design Using Nonconstant Upper Bounds in Semidefinite Programming

517

Improving the Validity of Lifelogging Physical Activity Measures in an Internet of Things Environment

518

Improving the value assessment of IT investments: A case study

519

Improving the Value of Archived Personal Content with Aesthetic and Reflexive Qualities

520

Improving the variable ordering of OBDDs is NP-complete

521

Improving the velocity sensing resolution of pulse encoders by FIR prediction

522

Improving the verification process of video quality metrics

523

Improving the vertical handover latency for VoIP between WLAN and WiMAX networks

524

Improving the Vertical Light Extraction Efficiency of GaN-Based Thin-Film Flip-Chip LED With Double Embedded Photonic Crystals

525

Improving the Vertical Light-Extraction Efficiency of GaN-Based Thin-Film Flip-Chip LEDs With p-Side Deep-Hole Photonic Crystals

526

Improving the vertical motion of wave piercing catamaran using T-foil

527

Improving the vibration isolation performance of hard mounts for precision equipment

528

Improving the video quality at scene transitions for MPEG-1/2 video encoders

529

Improving the video shot boundary detection using the HSV color space and image subsampling

530

Improving the video transmission quality over ip network

531

Improving the Visibility of Financial Applications Among Signal Processing Researchers[From the Guest Editors]

532

Improving the visibility of geospatial data on the Web

533

Improving the visibility of graphical program displays: an experimental study

534

Improving the visual analysis of high-dimensional datasets using quality measures

535

Improving the Visual Comprehension of Point Sets

536

Improving the visual performance of S/DISCUS

537

Improving the visual quality of abdominal magnetic resonance images using histogram equalization

538

Improving the visual quality of AVC/H.264 by combining it with content adaptive depth map compression

539

Improving the visual quality of median root prior images in PET and SPECT reconstruction

540

Improving the visualisation of polarimetric response in SAR imagery from pixels to images

541

Improving the visualization of hierarchies with treemaps: design issues and experimentation

542

Improving the VoIP performances during vertical handovers between WiMAX and WLAN

543

Improving the Voltage Holdoff Performance of Alumina Insulators in Vacuum Through Quasimetallizing

544

Improving the voltage profile and reactive power of the wind farm based fixed speed wind turbine with using STATCOM

545

Improving the voltage profile of a medium voltage grid using distributed generation units

546

Improving the voltage profiles of Distribution Networks using multiple Distribution Generation Sources

547

Improving the voltage quality of an inverter via by-passing the harmonic current components

548

Improving the voltage regulation of secondary feeders by applying solid-state tap changers to MV/LV transformers

549

Improving the voltage stability and performance of power networks using power electronics based FACTS controllers

550

Improving the Watermarking Embedding Algorithm Based on the Digital Image Technology

551

Improving the wavelength detection accuracy of FBG sensors using an ADALINE network

552

Improving the wear resistance of NiTi shape memory alloy thin films by nitrogen and carbon ion implantation

553

Improving the Web text content by extracting significant pages into a Web site

554

Improving the white patch method by subsampling

555

Improving the Wikipedia Miner word sense disambiguation algorithm

556

Improving the wind energy conversion system dynamics during fault ride through: UPFC versus STATCOM

557

Improving the Worst-Case Delay Analysis of an AFDX Network Using an Optimized Trajectory Approach

558

Improving the Worst-Case Execution Time Accuracy by Inter-Task Instruction Cache Analysis

559

Improving the WTLS by means of Kerberos

560

Improving the X-ray radiation tolerance of the analog ICs by using OCTO layout style

561

Improving the Yield and Turn-Around Time of Focused Ion Beam Microsurgery of Integrated Circuits by LCVD Method

562

Improving the Yield of Crude Oil from Jatropha Curcas Seeds by Solvent Tolerant Fungus in Solid-State Fermentation

563

Improving the yield of deep submicron CMOS processes by controlling the grain size of poly-Si gate through post deposition rapid thermal anneal

564

Improving theoretically-optimal and quasi-optimal inventory and transportation policies using adaptive critic based approximate dynamic programming

565

Improving thermal ablation delineation with electrode vibration elastography using a bidirectional wave propagation assumption

566

Improving thermal ablation delineation with electrode vibration elastography using a bidirectional wave propagation assumption

567

Improving Thermal Comfort in Residential Buildings Using Artificial Immune System

568

Improving thermal conductivity of polymer composites in embedded LEDs systems

569

Improving thermal endurance properties of polypropylene by nanostructuration

570

Improving thermal management in high power LEDs through fabricating nano-twinned copper substrates

571

Improving thermal management of multi-finger InGaP collector-up HBTs with a highly compact heat-spreading structure by GA

572

Improving Thermal Recovery Time for Soft-Starter-Connected AC Motors With Intermittent Periodic Duty Cycles

573

Improving thermal recovery time for soft-starter-connected AC motors with intermittent periodic duty cycles

574

Improving Thermal Reliability of FETs and MMICs

575

Improving thermal stability of opto-electronic oscillators

576

Improving thermal stability of shallow junctions by N₂ ⁺ pre-implantation

577

Improving thermal-safe test scheduling for core-based systems-on-chip using shift frequency scaling

578

Improving Thermo-mechanical Properties of Styrene Butadiene Rubber Nanocomposites Using Eggshell Bio-filler

579

Improving Thermosonic Gold Ball Bond Reliability

580

Improving thin film solar cells with atomic layer deposited ZnO: Highly tunable buffer, intrinsic, and top contact layers in a single fabrication process

581

Improving thin-film adhesion

582

Improving third-party relaying for LTE-A: A realistic simulation approach

583

Improving thoughput and fairness of transport connections in IEEE 802.11 based wireless networks

584

Improving thread scheduling by thread grouping in heavily loaded many-core processor systems

585

Improving three layer neural net convergence

586

Improving Three-Dimensional Semiconductor Modeling through Layout and Process Flow Analysis

587

Improving three-phase induction machines power factor using single phase auxiliary winding fed by an active power filter

588

Improving three-phase induction motor efficiency in Europe

589

Improving threshold assignment for cluster head selection in hierarchical wireless sensor networks

590

Improving threshold distributed energy efficient clustering algorithm for heterogeneous wireless sensor networks

591

Improving threshold performance of the IQML algorithm

592

Improving threshold-voltage uniformity of 0.1 μm InP-based MODFETs with different gate layouts

593

Improving Throat Microphone Speech Recognition by Joint Analysis of Throat and Acoustic Microphone Recordings

594

Improving throughout of continuous k-nearest neighbor queries with multi-threaded techniques

595

Improving Throughput and Fairness by Reducing Exposed and Hidden Nodes in 802.11 Networks

596

Improving throughput and fairness for MIMO ad hoc networks using antenna selection diversity

597

Improving Throughput and Fairness in Multi-Hop Wireless Mesh Networks Using Adaptive Contention Window Algorithm (ACWA)

598

Improving throughput and maintaining fairness using parallel TCP

599

Improving Throughput and Node Proximity of P2P Live Video Streaming through Overlay Adaptation

600

Improving Throughput and Reliability of Distributed Scientific Workflows for Streaming Data Processing

601

Improving throughput and utilization in parallel machines through concurrent gang

602

Improving throughput at airports with a dependency between arrival and departure operations

603

Improving throughput by fine-grained channel allocation in cooperative wireless networks

604

Improving throughput by integrated power allocation and rate selection in IEEE 802.1 lac downlink multi-user MIMO

605

Improving Throughput by Multi-Cell Coordinated Vertical Plane Beam Control with Pre-Coding

606

Improving throughput by On_Demand Bandwidth Allocation for WiMAX

607

Improving Throughput for Grid Applications with Network Logistics

608

Improving throughput for heterogeneous traffic in IEEE802.11e EDCA

609

Improving throughput in 0.25 /spl mu/m technology development and manufacturing - CVD TiN liner barrier applications

610

Improving Throughput in High Bandwidth-Delay Product Networks with Random Packet Losses

611

Improving throughput in multihop wireless networks

612

Improving Throughput of Faster-than-Nyquist Signaling over Multiple-Access Channels

613

Improving Throughput of Power-Constrained GPUs Using Dynamic Voltage/Frequency and Core Scaling

614

Improving Throughput of Power-Constrained Many-Core Processors Based on Unreliable Devices

615

Improving throughput of saturated wireless network with hidden terminals exist

616

Improving Throughput of Single-Relay DF Channel Using Linear Constellation Precoding

617

Improving throughput of wireless LANs with transmit power control and slotted channel access

618

Improving throughput of WLANs by scheduling random access

619

Improving Throughput Using MIMO-Based Routing Protocol with Multi-Links and Antenna-Selection

620

Improving Throughput Using Simple Network Coding

621

Improving throughput via slowdowns

622

Improving Throughput-delay Performance by Merged Packet Routing in Wirelessly Controlled Interactive Power Networks

623

Improving tibia and femur segmentation based on double labelling technique

624

Improving time measurement precision in embedded systems with a hybrid measuring method

625

Improving Time Parallel Simulation for Monotone Systems

626

Improving time performances of distributed PLC applications

627

Improving time series classification using Hidden Markov Models

628

Improving time to market forecasts: a comparison of two technology forecasting techniques for predicting U.S. fighter jet introductions from 1944 to 1982

629

Improving time variant channel estimation for 3GPP LTE-downlink

630

Improving time-domain EMI measurements through digital signal processing

631

Improving time-domain measurements with a network analyzer using a robust rational interpolation technique

632

Improving time-frequency sparsity for audio spatialization by time-adaptive windowing

633

Improving timeliness and reliability of data delivery in tactical wireless environments with Mockets communications library

634

Improving Time-Scale Modification of Music Signals Using Harmonic-Percussive Separation

635

Improving time-slot allocation in 4^th generation OFDM/TDMA TDD radio access networks with innovative channel-sensing

636

Improving time-to market through investments in design and process capabilities

637

Improving timing capabilities in 3G mobile networks

638

Improving timing characteristics through Semi-Random Net Reordering

639

Improving timing error tolerance without impact on chip area and power consumption

640

Improving Timing Offset Estimation by Alias Sampling

641

Improving timing predictability in UGV control systems through FPGA implementation

642

Improving Timing-Driven FPGA Packing with Physical Information

643

Improving Timing-Independent Testing of Crosstalk Using Realistic Assumptions on Delay Faults

644

Improving tin oxide/hydrogenated amorphous silicon interfaces for solar cell applications

645

Improving TLB energy for java applications on JVM

646

Improving TLB Performance by Increasing Hugepage Ratio

647

Improving TLS Protocol Using Identity-Based Double-certificate Mechanism

648

Improving TMA sequencing process: Innovative integration of AMAN constraints in controllers environment

649

Improving Token Coherence by Multicast Coherence Messages

650

Improving tolerance of neural networks against multi-node open fault

651

Improving Tolerance to Power-Supply and Temperature Variations in Synchronous Circuits

652

Improving Tolerance to Variations in Memristor-Based Applications Using Parallel Memristors

653

Improving tolerance toward optical in-band crosstalk by employing a high pass filter

654

Improving tool efficiency through automated process window qualification

655

Improving Topic Extraction in Chinese Documents Using Word Sense Disambiguation

656

Improving topological ATPG with symbolic techniques

657

Improving topological mapping on NoCs

658

Improving topological maps for safer and robust navigation

659

Improving torque per kilogram magnet of permanent magnet couplings using finite element analysis

660

Improving Total Dose Tolerance of Buried Oxides in SOI Wafers by Multiple-Step ${\\hbox {Si}}^ +$ Implantation

661

Improving Total IC Design Quality using Application Mode Testing

662

Improving tourist experience by Big Data tools

663

Improving trace cache effectiveness with branch promotion and trace packing

664

Improving Trace Precision for Concurrent Garbage Collection on Multicore Platform

665

Improving track continuity using track segment association

666

Improving track density by lithography

667

Improving tracking accuracy of a MIMO state feedback controller for elastic joint robots

668

Improving tracking accuracy using information of dissimilar sensors

669

Improving tracking behavior with virtual sensors in the loop

670

Improving tracking by integrating reliability of multiple sources

671

Improving tractability of Clinical Decision Support system

672

Improving tractability of POMDPs by separation of decision and perceptual processes

673

Improving traffic classification and policing at application layer

674

Improving traffic classifiers for active devices

675

Improving traffic estimation and prediction through dynamic traffic assignment development

676

Improving Traffic Flow Efficiency by In-Car Advice on Lane, Speed, and Headway

677

Improving traffic in urban environments applying the Wardrop equilibrium

678

Improving Traffic Locality in BitTorrent via Biased Neighbor Selection

679

Improving traffic operations using real-time optimal lane selection with connected vehicle technology

680

Improving traffic scheduling in wireless ATM networks

681

Improving traffic signal control for pedestrians

682

Improving training of radial basis function network for classification of power quality disturbances

683

Improving Training Speed of Support Vector Machines by Creating Exploitable Trends of Lagrangian Variables: An Application to DNA Splice Site Detection

684

Improving training time of deep neural networkwith asynchronous averaged stochastic gradient descent

685

Improving trajectory tracking by feedforward evolutionary multivariable constrained optimization

686

Improving trajectory tracking for systems with unobservable modes using command generation

687

Improving Trajectory Tracking in Wave-Variable-Based Teleoperation

688

Improving trajectory tracking of a three axis SCARA robot using neural networks

689

Improving transaction processing performance by consensus reduction

690

Improving Transaction Server Performance under Heavy Loads with Differentiated Service and Active Network Interfaces

691

Improving Transaction-Time DBMS Performance and Functionality

692

Improving transcoding capability of speech coders in clean and frame erasured channel environments

693

Improving transfer learning accuracy by reusing Stacked Denoising Autoencoders

694

Improving Transform Domain Wyner-Ziv Video Coding Performance

695

Improving transformer characteristics under harmonics

696

Improving transformer tap changer processing in distribution state estimators

697

Improving transformer´s utilization under customer reliability requirements

698

Improving Transformers´ Utilization Under Single Contingency Policy and Customer Reliability Requirements

699

Improving transient behavior of model-reference adaptive control

700

Improving transient error tolerance of digital VLSI circuits using robustness compiler (ROCO)

701

Improving transient memory fault resilience of an H.264 decoder

702

Improving transient performance by adaptive control of robots

703

Improving Transient Performance for Voltage Regulators with Error Amplifier Voltage Positioning

704

Improving Transient Performance in Tracking Control for a Class of Nonlinear Discrete-time Systems with Input Saturation

705

Improving Transient Performance in Tracking General References Using Composite Nonlinear Feedback Control and Its Application to High-Speed $XY$ -Table Positioning Mechanism

706

Improving Transient Performance of Automated Convoy Vehicles using Command Shaping

707

Improving Transient Performance of Reluctance Motors

708

Improving transient performance of reluctance motors

709

Improving transient performance of signal transformation approach

710

Improving transient response of adaptive control systems using multiple models and switching

711

Improving transient response of adaptive control systems using multiple models and switching

712

Improving transient response of control systems using switching techniques

713

Improving Transient Response of Model Reference Neuro-Controller via Constrained Optimization

714

Improving transient stability by containing accelerating energy

715

Improving Transient Stability by Use of Dynamic Braking

716

Improving transient stability limits by damping accelerating energy

717

Improving transient stability of a synchronous machine by electronic commutation of a neutral capacitor bank

718

Improving Transient Stability of AC System by Joint Usage of DC System

719

Improving Transient Stability of Grid-Connected Squirrel-Cage Induction Generators by Plugging Mode Operation

720

Improving transient stability of multi-machine power systems: Synchronization via immersion of a pendular system

721

Improving transient stability of photovoltaic-hydro microgrids using virtual synchronous machines

722

Improving transient stability using fast valving based on tracking rotor-angle and active power

723

Improving transient stability using generator tripping based on tracking rotor-angle

724

Improving transient state myoelectric signal recognition in hand movement classification using gyroscopes

725

Improving transition between power optimization and power limitation of variable speed, variable pitch wind turbines using fuzzy control techniques

726

Improving transition delay fault coverage using hybrid scan-based technique

727

Improving Transition Delay Test Using a Hybrid Method

728

Improving Transition Fault Test Pattern Quality through At-Speed Diagnosis

729

Improving Translation Invariance by Complex Wavelet using Phase Information

730

Improving transmission by MIMO channel structuring

731

Improving transmission capacity of wireless networks with multi-domain collaborations

732

Improving Transmission Efficiency in H.264 Based IPTV Systems

733

Improving Transmission Line Design by Using Reliability Techniques

734

Improving Transmission Line Design by Using Reliability Techniques

735

Improving transmission network security by independent power producers performance control

736

Improving transmission performance in EIN limited 2.5 Gb/s spectral slicing loop-back WDM-PON based on RSOA employing the dispersion management

737

Improving transmission performance using a waveguide filter in all-optical wavelength converters

738

Improving Transmission Privacy Using Optical Layer XOR

739

Improving transmission rate for the two-way relay channel by user cooperation

740

Improving transmission reliability of low-power medium access control protocols using average diversity combining

741

Improving transmit power control performance for WCDMA systems

742

Improving transparency in macro-micro tele-manipulation by means of external force estimation

743

Improving transparency in network-based haptics

744

Improving transparency in passive teleoperation by combining cutaneous and kinesthetic force feedback

745

Improving transparency of powered exoskeletons using force/torque sensors on the supporting cuffs

746

Improving Transparent Adaptability in Web Service Composition

747

Improving Transport Layer Performance in Multihop Ad Hoc Networks by Exploiting MAC Layer Information

748

Improving travel time reliability by the use of trip booking

749

Improving traveling-wave RF fields inside magnetic resonance imaging bores by incorporating dielectric loadings

750

Improving travel-time reliability by the use of trip booking

751

Improving tree-based models of software quality with principal components analysis

752

Improving tribological performance of structural 45-steel by high dose molybdenum ion implantation

753

Improving trickle fairness: Locally-calculated redundancy constants

754

Improving trigram language modeling with the World Wide Web

755

Improving tropical deforestation detection by fusing multiple SAR change measures

756

Improving tropical forest mapping using combination of optical and microwave data of ALOS

757

Improving Trust and Privacy Models in Social Networks

758

Improving trust using online credibility sources and social network quality in P2P marketplaces

759

Improving trust valuation for file sharing in P2P networks

760

Improving TSO´s coordination for cross-border redispatch: a discussion of possible approaches in the European context

761

Improving TTCN-3 Test System Robustness Using Software Fault Tolerance

762

Improving TTFF by Two-Satellite GNSS Positioning

763

Improving tumor accumulation with SPIO-Loaded acoustic nanodroplets and magnetic targeting

764

Improving Tumor Identification by Using Tumor Markers Classification Strategy

765

Improving tuning capability of the adjusting neural network

766

Improving Tuning Range and Sensitivity of Localized SPR Sensors With Graphene

767

Improving turbo code error performance by multifold coding

768

Improving Turbo Codec Integration in Pixel-Domain Distributed Video Coding

769

Improving turbo codes by control of transient chaos in turbo-decoding algorithms

770

Improving turbo decoding via cross-entropy minimization

771

Improving turbocharged diesel engine operation with turbo power assist system

772

Improving turbocode performance by cross-entropy

773

Improving turbo-like codes using iterative decoder analysis

774

Improving TV picture quality with linear-median type operations

775

Improving TV Transmitter System VSWR and Related Frequency Response

776

Improving T-wave alternans measurement quality by reducing noise and artifacts

777

Improving two-level logic minimization technique for low power driven multilevel logic re-synthesis

778

Improving two-temperature method retrievals based on a nonlinear optimization approach

779

Improving TWSTFT short-term stability by network time transfer

780

Improving TWSTFT short-term stability by network time transfer

781

Improving UAV mission success rate through software enabled control design

782

Improving UDP and TCP performance in mobile ad hoc networks with INSIGNIA

783

Improving UE SINR and networks energy efficiency based on femtocell self-optimization capability

784

Improving UHF partial discharge location in high voltage equipment

785

Improving UK power quality with arc suppression coils

786

Improving ultrasonic imaging of the vascular wall and blood flow using a multiphysics simulation tool integrating fluid-structure interaction and ultrasound simulations

787

Improving ultrasound imaging with integrated electronics

788

Improving ultrasound intensity-based visual servoing: Tracking and positioning tasks with 2D and bi-plane probes

789

Improving UML design tools by formal games

790

Improving Uncertain Data-Quality through Effective Use of Knowledge Base

791

Improving undergraduate academic advising in engineering: it´s not rocket science

792

Improving undergraduate soft skills using m-learning and serious games

793

Improving undergraduate students programming skills through Collaborative Adversarial Pair Learning

794

Improving undergraduates´ engineering abilities with Chinese situation

795

Improving undergraduates´ software engineering ability by adapting blended learning model

796

Improving undergraduates´ teamwork skills by adapting project-based learning methodology

797

Improving underground power distribution capacity using artificial backfill materials

798

Improving underground radio communications and use of RF simulcast networks in rapid transit operations

799

Improving Undersampled MRI Reconstruction Using Non-local Means

800

Improving understandability in teaching of software engineering and connectivity with the industry

801

Improving underwater thruster performance through jellyfish biomimicry and 2D jet velocity

802

Improving Underwater Vehicle navigation state estimation using Locally Weighted Projection Regression

803

Improving underwater video navigation systems using Georeferencing and Super-Resolution techniques

804

Improving uniformity in detection performance of clustered microcalcifications in mammograms

805

Improving university e-Learning with exploratory data analysis and web log mining

806

Improving unmanned aerial vehicle pilot training and operation for flying in cluttered environments

807

Improving Unresponsive Flow Control by Active Queue Management Algorithm

808

Improving unsegmented network coding for opportunistic routing in wireless mesh network

809

Improving Unstructured P2P Systems by Partial Indexing

810

Improving unstructured peer-to-peer systems by adaptive connection establishment

811

Improving Update-Intensive Workloads on Flash Disks through Exploiting Multi-Chip Parallelism

812

Improving uplink adaptive antenna algorithms for WCDMA by covariance matrix compensation

813

Improving uplink bandwidth management in 802.16 networks

814

Improving uplink LTE performance with modulation-aware iterative equalization

815

Improving uplink performance by macrodiversity combining packets from adjacent access points

816

Improving uploading performance of TCP in network mobility

817

Improving upon logistic regression to predict United States Army delayed entry program (DEP) losses

818

Improving upon pulse-to-pulse stability in GaN RADAR amplifiers compromised by the presence of GaN trapping effects

819

Improving upon the HD-MAC algorithm for HDTV bandwidth compression

820

Improving upon toll quality speech for VOIP

821

Improving upper bound on the capacity of planar wireless networks with omnidirectional antennas

822

Improving Urban Change Detection From Multitemporal SAR Images Using PCA-NLM

823

Improving urban impervious surface classification by combining Landsat and PolSAR images: A case study in Kitchener-Waterloo, Ontario, Canada

824

Improving urban road extraction in high-resolution images exploiting directional filtering, perceptual grouping, and simple topological concepts

825

Improving Urban Traffic by Velocity Guidance

826

Improving Urban Vehicle Localization with Traffic Sign Recognition

827

Improving Usability of Fault Injection

828

Improving Usability of FPGA-Based Reconfigurable Computers Through Operating System Support

829

Improving Usability of HTA Charts

830

Improving usability of interactive graphics specification and implementation with picking views and inverse transformation

831

Improving usability of passphrase authentication

832

Improving Usability of Software Refactoring Tools

833

Improving Usability of Web Pages for Blinds

834

Improving usability through eye tracking research

835

Improving Use Case Specifications by means of Refactoring

836

Improving usefulness of software quality classification models based on Boolean discriminant functions

837

Improving user and ISP experience through ISP-aided P2P locality

838

Improving user cognitive processes in mobile learning platforms through context-awareness

839

Improving user comfort in haptic virtual environments through gravity compensation

840

Improving user comprehension of Euler diagrams

841

Improving User Control and Transparency in the Digital Humanities

842

Improving user experience and resource management in wireless communications

843

Improving User Experience for Passenger Information Systems. Prototypes and Reference Objects

844

Improving user experience of submitting jobs to HPC resources

845

Improving User Interface of Spreadsheet Functions by Object-Oriented Design

846

Improving user interfaces of interactive robots with multimodality

847

Improving user involvement through a model-driven requirements approach

848

Improving user performance

849

Improving user privacy with firewall techniques on the wireless LAN access point

850

Improving user QoE for residential broadband: Adaptive traffic management at the network edge

851

Improving User Satisfaction in a Ubiquitous Computing Application

852

Improving user satisfaction in adaptive multicast video

853

Improving user satisfaction in agent-based electronic marketplaces by reputation modelling and adjustable product quality

854

Improving user-interface responsiveness despite performance limitations

855

Improving user-level performance of best effort service for WLAN

856

Improving user-perceived performance at a World Wide Web server

857

Improving user-perceived QoS in mobile and wireless IP networks using real-time adaptive multimedia applications

858

Improving users satisfaction by using requirements engineering approaches in the conceptual phase of construction projects: The elicitation process

859

Improving Users´ Isolation in IaaS: Virtual Machine Placement with Security Constraints

860

Improving Users´ Mental Models of Intelligent Software Tools

861

Improving utility accrual scheduling algorithm for adaptive real-time System

862

Improving utility energy efficiency through loss identification

863

Improving utility operational excellence through non-operational data management

864

Improving utilization and customer satisfaction of parking space with M2M communications

865

Improving utilization for deterministic service in multimedia communication

866

Improving utilization of data center networks

867

Improving Utilization of Hardware Signatures in Transactional Memory

868

Improving Utilization of Infrastructure Clouds

869

Improving Utilization of Reconfigurable Resources Using Two Dimensional Compaction

870

Improving utilization through dynamic VM resource allocation in hybrid cloud environment

871

Improving UTRA TDD downlink power control with asymmetrical steps

872

Improving utterance verification using a smoothed naive Bayes model

873

Improving utterance verification using additional confidence measures in isolated speech recognition interfaces

874

Improving utterance verification using hierarchical confidence measures in continuous natural numbers recognition

875

Improving UWSNs security and data reliability using a cluster controlled mobility scheme

876

Improving V2I Edge Communication by Performance Maps

877

Improving V2R connectivity to provide ITS applications in IEEE 802.11p/WAVE VANETs

878

Improving V2X simulation performance with optimistic synchronization

879

Improving valid and deficient body segment coordination to improve FES-assisted sit-to-stand in paraplegic subjects

880

Improving validation activities in a global software development

881

Improving validation coverage metrics to account for limited observability

882

Improving value communication for thread-level speculation

883

Improving value-creation ability, internal operations efficiency, & competitive advantage of firms by the adoption of a new technology: Four case-studies

884

Improving VANET protocols via network science

885

Improving Variance Estimation in Biometric Systems

886

Improving Various Reversible Data Hiding Schemes Via Optimal Codes for Binary Covers

887

Improving VCS with filtering

888

Improving vector quantization in image compression with Hilbert scan

889

Improving vector quantization of satellite images through the application of bi-orthogonal wavelets

890

Improving vehicle detection by adapting parameters of HOG and kernel functions of SVM

891

Improving Vehicle Diagnostics through Wireless Data Collection and Statistical Analysis

892

Improving Vehicle Fleet Fuel Economy via Learning Fuel-Efficient Driving Behaviors

893

Improving Vehicle Lateral Stability Based on Variable Stiffness and Damping Suspension System via MR Damper

894

Improving Vehicle Positioning and Visual Feature Estimates through Mutual Constraint

895

Improving vehicle safety using context based detection of risk

896

Improving Vehicle Stability Using Electro-hydraulic Braking System

897

Improving Vehicular Delay-Tolerant Network Performance with Relay Nodes

898

Improving velocity obstacle approach for obstacle avoidance in indoor environments

899

Improving Verb Sense Disambiguation with Automatically Retrieved Semantic Knowledge

900

Improving verification and reliability of distributed control systems design according to IEC 61499

901

Improving verification and validation in hardware/software environments. Introduction to the workshop

902

Improving verification coverage of analog circuit blocks by state space-guided transient simulation

903

Improving Vertical Handover over Heterogeneous Technologies Using a Cross Layer Framework

904

Improving Vertical Handover Performance with PHY-Mode Recommendations Based on Localized Link State Measurements

905

Improving vertical handovers using IEEE 802.21 services and multicast addressing

906

Improving Vertical Synchronization

907

Improving vessel segmentation in ultra-wide field-of-view retinal fluorescein angiograms

908

Improving VG-RAM WNN Multi-label Text Categorization via Label Correlation

909

Improving VHDL soft-cores reuse with software-like reviews and audits procedures

910

Improving VHT MU-MIMO communications by concatenating long data streams in consecutive groups

911

Improving video browsing with an eye-tracking evaluation of feature-based color bars

912

Improving Video Coding at Scene Cuts using Attention based Adaptive Bit Allocation

913

Improving video coding quality by perceptual rate-distortion optimization

914

Improving video communication for elderly or disabled by coordination of robot´s active listening behaviors and media controls

915

Improving video communication in distributed smart camera systems through ROI-based video analysis and compression

916

Improving video concept detection through label space partitioning

917

Improving video concept detection using uploader model

918

Improving video conferencing application quality for a mobile terminal through cognitive radio

919

Improving Video Delivery over Wireless Multimedia Sensor Networks Based on Queue Priority Scheduling

920

Improving video performance in VNC under high latency conditions

921

Improving video QoS in an error prone wireless network

922

Improving Video Quality in 802.11 Networks

923

Improving video quality in congested networks through deferred discard

924

Improving Video Quality in Network Paths with Bursty Losses

925

Improving video quality using packet interleaving, randomisation and redundancy

926

Improving Video Stabilization in the Presence of Motion Blur

927

Improving Video Steganalysis Using Temporal Correlation

928

Improving Video Streaming over IEEE 802.11 Mesh Networks through a Cross-Layer Design Technique

929

Improving video summarization based on user preferences

930

Improving video transmission on the Internet

931

Improving video-based resting heart rate estimation: A comparison of two methods

932

Improving video-on-demand server efficiency through stream tapping

933

Improving Videophone Transmission over Multi-Rate IEEE 802.11e Networks

934

Improving Vietnamese POS tagging by integrating a rich feature set and Support Vector Machines

935

Improving Vietnamese Sentence Compression by Segmenting Meaning Chunks

936

Improving viewpoint invariance of image feature extraction methods using intensity and range images

937

Improving virtual learning environments by development and integration of 3D models of real devices

938

Improving virtual loop sensor accuracy for 2D motion detection

939

Improving Virtual Machine live migration via application-level workload analysis

940

Improving Virtual Machine Migration in Federated Cloud Environments

941

Improving Virtual Machine Migration via Deduplication

942

Improving Virtual Machine Reliability with Driver Fault Isolation

943

Improving virtual machines networking performance for cloud computing

944

Improving Virtual Team Communication

945

Improving Virtual-Grid Compaction Through Grouping

946

Improving virtualization performance and scalability with advanced hardware accelerations

947

Improving Virtualized Windows Network Performance by Delegating Network Processing

948

Improving visibility and fidelity of underwater images using an adaptive restoration algorithm

949

Improving visibility and resolution in imaging through obscuring dispersive media

950

Improving visible-surface reconstruction

951

Improving vision-based control using efficient second-order minimization techniques

952

Improving vision-based planar motion estimation for unmanned aerial vehicles through online mosaicing

953

Improving Vision-Based Self-Positioning in Intelligent Transportation Systems via Integrated Lane and Vehicle Detection

954

Improving Visual Awareness by Real-Time 2D Facial Animation for Ubiquitous Collaboration

955

Improving Visual Communication for EIT-Based Lung Research

956

Improving visual corrosion inspection accuracy with image enhancement filters

957

Improving visual impact analysis

958

Improving visual matching

959

Improving visual noise insensitivity in small vocabulary audio visual speech recognition applications

960

Improving visual perception of augmented reality on mobile devices with 3D red-cyan glasses

961

Improving visual quality in wireless capsule endoscopy images with contrast-limited adaptive histogram equalization

962

Improving Visual Quality of Reversible Data Hiding in Medical Image with Texture Area Contrast Enhancement

963

Improving visual recognition using color normalization in digital video applications

964

Improving visual servoing control with high speed cameras

965

Improving visual servoing using fuzzy filters

966

Improving visual SLAM accuracy through deliberate camera oscillations

967

Improving visual SLAM algorithms for use in realtime robotic applications

968

Improving visual tracking robustness in cluttered and occluded environments using Particle Filter with Hybrid Resampling

969

Improving Visualization of Large Hierarchical Clustering

970

Improving visualization of mixed-type data with a dynamic SOM

971

Improving visualization skills in engineering education

972

Improving visualization: theoretical and empirical foundations

973

Improving visually servoed disassembly operations by automatic camera placement

974

Improving Viterbi Bayesian predictive classification via sequential Bayesian learning in robust speech recognition

975

Improving VLAD with regional PCA whitening

976

Improving VLAD: Hierarchical coding and a refined local coordinate system

977

Improving VLIW Processor Performance Using Three-Dimensional (3D) DRAM Stacking

978

Improving VNA measurement accuracy by including connector effects in the models of calibration standards

979

Improving Vocabulary Acquisition By Designing A Storytelling Robot

980

Improving vocabulary independent HMM decoding results by using the dynamically expanding context

981

Improving VoD Performance with LAN Client Back-End Buffering

982

Improving Voice and Data Services in Cellular/WLAN Integrated Networks by Admission Control

983

Improving voice interaction for older people using an attachable gesture robot

984

Improving voice over IP subjective call quality

985

Improving voice quality in international mobile-to-mobile calls

986

Improving voice quality of HMM-based speech synthesis using voice conversion method

987

Improving VOIP application´s performance over WLAN using a new distributed fair MAC scheme

988

Improving VoIP Call Capacity of Multi-Hop Wireless Networks through Self-Controlled Frame Aggregation

989

Improving VoIP call capacity over IEEE 802.11 networks

990

Improving VoIP over synchronized WLANs

991

Improving VoIP quality through path switching

992

Improving VoIP Traffic Performance in WiMAX Networks

993

Improving Voltage Assignment by Outlier Detection and Incremental Placement

994

Improving voltage dip ride-through capability of distribution changeover systems

995

Improving voltage disturbance rejection for variable-speed wind turbines

996

Improving voltage disturbance rejection for variable-speed wind turbines

997

Improving Voltage Disturbance Rejection for Variable-Speed Wind Turbines

998

Improving voltage profile in radial distribution systems using binary particle swarm optimization and probabilistic load flow

999

Improving voltage profiles in the Dominican electricity network using Static VAR Compensators

1000

Improving Voltage Regulation and Harmonic Elimination using Genetic Algorithm in PWM Choppers