<< مقالات لاتين فني مهندسي >>
<< بر اساس عنوان >>
1
Analysis of Technology Innovation Factors in Circular Economy System
2
Analysis of technology scaling impact on CMOS, CPL, and Domino logic styles using 0.8-, 0.6-, 0.35- and 0.25µm technologies
3
Analysis of Technology Trends Based on Big Data
4
Analysis of Technology Trends Basedon Diverse Data Sources
5
Analysis of tectonic and karst formations as geological hazard for exploitation of flyschoid rocks by Ground Penetrating Radar, the case of Anhovo-Rodež quarry (W Slovenia)
6
Analysis of telecommunications switch model (GEO/D/1) with time priorities
7
Analysis of Telemedicine Diffusion: The Case of China
8
Analysis of telemetering service in OpenStack
9
Analysis of telemetric system based on remote resonant sensing circuit
10
Analysis of teleradiological data transmission in IRAQ by modeling and simulation
11
Analysis of telescope arrays based receiver for deep-space optical communications with Mars
12
Analysis of telescope arrays for deep space optical communications
13
Analysis of telescope site selection for optical deep space network
14
Analysis of telomere intensities in human chromosomes with application to classification of chromosome 16 homologs
15
Analysis of Telugu Palm Leaf Character Recognition Using 3D Feature
16
Analysis of TEM cells using the finite-difference technique and the conjugate gradient method
17
Analysis of TEM mode on a curved coaxial transmission line
18
Analysis of temperature adaptability for frequency control loop for silicon micromechanical gyroscope
19
Analysis of Temperature and Magnetic Field Distribution in Superconducting Bulk During Pulsed Field Magnetization
20
Analysis of temperature and process variation effects on photo sensor circuits using device/circuit mixed-mode simulations
21
Analysis of temperature and velocity field in air conditioned room
22
Analysis of temperature compensated SAW modes in ZnO/SiO
2
/Si multilayer structures
23
Analysis of Temperature Compensation in a Plate Thickness Mode Bulk Acoustic Wave Resonator
24
Analysis of temperature dependence of Si-Ge HBT
25
Analysis of temperature dependent I-V characteristics of Pd/ZnO/n-Si schotky diode by sol-gel method
26
Analysis of temperature dependent optical gain of strained quantum well taking account of carriers in the SCH layer
27
Analysis of Temperature Dependent Quench Characteristics of the YBCO Coated Conductor
28
Analysis of temperature distribution for the electric generator in rim-driven marine current power system
29
Analysis of Temperature Distribution in Coil-Strands of Rotating Electric Machines with One Turn Coil
30
Analysis of Temperature Distribution in Coil-Strands of Rotating Electric Machines with One-Turn Coil
31
Analysis of Temperature Distribution in Power Converter for Switched Reluctance Motor Drive
32
Analysis of temperature distribution in stacked IC with a thermal simulation and a specially designed test structure
33
Analysis of Temperature Distribution in Stacked IC With On-Chip Sensing Device Arrays
34
Analysis of temperature distribution in switched reluctance linear launcher
35
Analysis of Temperature Distribution in the Stator of Large Synchronous Machines Considering Heat Conduction and Heat Convection
36
Analysis of temperature distribution on power converter for switched reluctance linear launcher
37
Analysis of temperature drift rejection of coil impedance
38
Analysis of temperature effect for horizontal rotation of ten thousand tons cable-stayed bridge in construction monitoring
39
Analysis of temperature effect on differential pressure method for air leak detection
40
Analysis of temperature effect on electromagnetic susceptibility of microcontroller
41
Analysis of temperature effect on optimum sizing of solar photovoltaic water pumping system
42
Analysis of Temperature Effect on p-i-n Diode Circuits by a Multiphysics and Circuit Cosimulation Algorithm
43
Analysis of temperature effects on 1.55 μm vertical-cavity lasers
44
Analysis of temperature effects on maximum power-efficiency of pass transistor logic networks in low-voltage CMOS
45
Analysis of temperature elevation in older individuals for far-field microwave exposures
46
Analysis of temperature field distribution of magnetic-fluid bearing for high-speed trains
47
Analysis of temperature field in switched reluctance motor based on finite-element
48
Analysis of temperature field of Embedded Multi-Chip Module
49
Analysis of Temperature Field of Wet Clutch Based on Non-Fourier
50
Analysis of Temperature in High Power Laser Array Heat Sinks
51
Analysis of Temperature in Phase Change Memory Scaling
52
Analysis of temperature increase in the post-wall waveguide type exposure apparatus in vitro
53
Analysis of Temperature Model on Device Characteristics for AlGaN/GaN MODFET for High Power Electronics
54
Analysis of Temperature Modulation on a SiGe Power Amplifier Non Linearity
55
Analysis of temperature profiles and protective mechanism against dry-band arcing in silicone rubber nanocomposites
56
Analysis of temperature rise for piezoelectric transformer using finite-element method
57
Analysis of temperature rise generated by a titanium implant inside 1.5T MRI RF whole body coil
58
Analysis of temperature rise in reactors using coupled multi-physics simulations
59
Analysis of temperature rise in switched reluctance motor due to the core and copper loss by coupled field finite element analysis
60
Analysis of Temperature Rise of TF Magnet During Plasma Discharges on EAST
61
Analysis of temperature sensitivity for a dual-resonant LPWG based on SU-8/NOA-61 polymers
62
Analysis of temperature sensitivity in long period gratings with doping concentrations of GeO
2
and B
2
O
3
63
Analysis of temperature stress for concrete box girders cracking
64
Analysis of temperature-dependent current-voltage characteristics for CIGSSe and CZTSSe thin film solar cells from nanocrystal inks
65
Analysis of Temperature-Dependent Electrical Characteristics of n-ZnO Nanowires (NWs)/p-Si Heterojunction Diodes
66
Analysis of temperature-dependent magnetization in Sm-Fe-C compounds using a two-sublattice model
67
Analysis of temperature-dependent optical gain in GaN-InGaN quantum-well structures
68
Analysis of temperature-induced saturation threshold voltage degradation in deep-submicrometer ultrathin SOI MOSFETs
69
Analysis of template aging in iris biometrics
70
Analysis of template matching prediction and its application to parametric overlapped block motion compensation
71
Analysis of template on the floor earlier disassembly system of concrete creep
72
Analysis of template update strategies for keystroke dynamics
73
Analysis of Temporal and Spatial Characteristics on Output of Wind Farms with Doubly Fed Induction Generator Wind Turbines
74
Analysis of Temporal and Spatial Gait Parameters in Children with Spastic Cerebral Palsy
75
Analysis of temporal and spectral response of an optical fiber Fizeau interferometer applied to the study of photocurable resins
76
Analysis of temporal backscatter of rice: A comparison of RADARSAT observations with modeling results
77
Analysis of temporal backscattering of cotton crops using a semiempirical model
78
Analysis of temporal changes in vegetation in central Japan by remote sensing and ground data
79
Analysis of temporal compression characteristics using active phase conjugation in systems with multiple antenna elements
80
Analysis of Temporal Decorrelation in Dual-Baseline Polinsar Vegetation Parameter Estimation
81
Analysis of temporal gene expression profiles using time-dependent MUSIC algorithm
82
Analysis of Temporal High-Dimensional Gene Expression Data for Identifying Informative Biomarker Candidates
83
Analysis of temporal impairments on airborne VDL Mode 2 packet reception
84
Analysis of Temporal Land Cover Change using the ESA Rolling Archives
85
Analysis of Temporal Latency Variation on Network Coordinate System for Host Selection in Large-Scale Distributed Network
86
Analysis of temporal noise in CMOS photodiode active pixel sensor
87
Analysis of Temporal Pattern of Swallowing Mechanism
88
Analysis Of Temporal Stability Of The P-3 Sar System
89
Analysis of temporal structure reflected from laying surface ultrawideband signals taking into account dispersion of reflection coefficient
90
Analysis of temporal trends in potential evaportranspiration over Heihe River basin
91
Analysis of temporal variability of measured and modeled vertical distributions of salinity and temperature in the Gulf of Finland during 10-year period
92
Analysis of temporal variability of MODIS leaf area index (LAI) product over temperate forest in Korea
93
Analysis of temporal vehicle behaviors using bag of dynamical systems
94
Analysis of temporal-based program behavior for improved instruction cache performance
95
Analysis of Temporary Overvoltages During Open-Phase Faults in Distribution Networks With Resonant Grounding
96
Analysis of ten vowel sounds across gender and regional/cultural accent
97
Analysis of tentative accommodating and congestion confirming strategy: a novel admission control strategy for packet switching networks
98
Analysis of ten-year land use dynamic changes in Huabei region supported by GIS and RS
99
Analysis of Terahertz Absorption Spectra Characteristic of 1-Naphthaleneacetic Acid and 4-Chlorophenoxyacetic Acid in Terahertz Region
100
Analysis of terahertz absorptions of structural isomers of tyrosine using a molecular orbital simulation and mid-infrared absorptions
101
Analysis of terahertz metamaterial perfect absorber by using a novel qausi-static RLC circuit model
102
Analysis of terahertz optical asymmetric demultiplexers subject to picosecond control and signal optical pulses
103
Analysis of terahertz spectral variations in porcine dermis
104
Analysis of terahertz surface emitting quantum-cascade lasers
105
Analysis of terahertz systems and analytical methods for modeling their optical efficiency
106
Analysis of terahertz waveforms measured by photoconductive and electrooptic sampling
107
Analysis of terahertz zero bias detectors by using a triple-barrier resonant tunneling diode integrated with a self-complementary bow-tie antenna
108
Analysis of terminal voltage and output power control of wind turbine generator by series and parallel compensation using SMES
109
Analysis of terminated lossless planar multilayer periodic EBG structures of DNG media using an equivalent BCITL model
110
Analysis of terminated lossless planar multilayer periodic EBG Structures Using an equivalent CCITL model
111
Analysis of termination impedance effects on the linearity of 5 GHz CMOS radio frequency amplifiers
112
Analysis of termination impedance influence to radiated emission from AC cable with CMAD
113
Analysis of ternary multiplier using booth encoding technique
114
Analysis of terrain effects on radio wave propagation through a full solution of an integral equation
115
Analysis of terrain interaction with a wheel-track robot
116
Analysis of Terrain Roughness Based on Statistics
117
Analysis of terrain scattered interference-mitigation
118
Analysis of territorial development intensity in China using DMSP/OLS data
119
Analysis of Terrorist Groups on Facebook
120
Analysis of TE-scattering from multiangular groove in ground plane
121
Analysis of TESLA protocol in vehicular ad hoc networks using timed colored Petri nets
122
Analysis of test case coverage using data mining technique
123
Analysis of test circuits for evaluating HVDC cables
124
Analysis of test circuits for measuring impulse grounding resistance
125
Analysis of Test Clusters for Regression Testing
126
Analysis of test coupon structures for the extraction of high frequency PCB material properties
127
Analysis of test data from an automatic vehicle monitoring (AVM) test
128
Analysis of test sequence generators for built-in self-test implementation
129
Analysis of Testability Metrics for Lustre/Scade Programs
130
Analysis of testable PLA designs
131
Analysis of testing methodologies for custom designs in PowerPC
TM
microprocessor
132
Analysis of Testing Metrics for Object Oriented Applications
133
Analysis of Testing Square Cabin Shielding Efficiency
134
Analysis of testosterone propionate from aquatic products with off-line subcritical fluid extraction-high performance liquid chromatography system
135
Analysis of text entry performance metrics
136
Analysis of text layout quality using wearable eye trackers
137
Analysis of text-based CAPTCHA images using Template Matching Correlation technique
138
Analysis of textile fabric structure based on three-dimensional fiber model matching method
139
Analysis of textile fabric structure with the CT images
140
Analysis of Textual Variation by Latent Tree Structures
141
Analysis of textural features for face biometric anti-spoofing
142
Analysis of texture databases
143
Analysis of texture distributions of polarimetric SAR data
144
Analysis of texture images using robust fractal description
145
Analysis of textured PolSAR data by shannon entropy
146
Analysis of TF Insert Coil
147
Analysis of TFCI coding performance of WCDMA systems
148
Analysis of TFET based 6T SRAM cells implemented with state of the art silicon nanowires
149
Analysis of Thai Sentences with a Serial Verb Using a Semantic Lexicon
150
Analysis of THD and output voltage performance for cascaded multilevel inverter using carrier pulse width modulation techniques
151
Analysis of the "GPATD": Geometrical Influence on Blood Clot Extraction Using CFD Simulation
152
Analysis of the “Crack characteristic signal” using a generalized scattering matrix representation
153
Analysis of the “hot” electron regime of operation in heterostructure field effect transistors
154
Analysis of the Σ-Δ pulsed digital oscillator for MEMS
155
Analysis of the (1+1) EA for a dynamically changing ONEMAX-variant
156
Analysis of the /spl Delta/AIC statistic for optimal detection of small changes in dynamic systems
157
Analysis of the ´microstrip-loaded inset dielectric waveguide´
158
Analysis of the
-EA for Finding Approximate Solutions to Vertex Cover Problems
159
Analysis of the
-Pass or
-Pass Metal-Clad Polarizer With a Resonant Buffer La
160
Analysis of the
-Cell Single Phase MMC Natural Balancing Mechanism
161
Analysis of the 1992–2010 dynamic deformation affecting the Yellowstone Caldera
162
Analysis of the 1993 midwestern flood using satellite and ground data
163
Analysis of the 1999 DARPA/Lincoln Laboratory IDS evaluation data with NetADHICT
164
Analysis of the 1-Joint Spring-Motor Coupling System and optimization criteria focusing on the velocity increasing effect
165
Analysis of the 220kV line distance protection´s measuring impedance when V/X traction transformer is in short circuit
166
Analysis of the 2D nonconcentric large reflector antenna-in-radome system: H-polarization case
167
Analysis of the 2-hop time division relaying system performance with optimal power allocation
168
Analysis of the 3-D magnetic reluctivity tensor based on magnetic properties measurement of SMC materials
169
Analysis of the 3D steady temperature field of MW high speed permanent magnet motor
170
Analysis of the 3D transient electromagnetic field-circuit-movement coupled problem
171
Analysis of the 3-Layer Workflow Scheduling Model Based on Improved Dijkstra Algorithm
172
Analysis of the 425-MHz Klystrode
173
Analysis of the 4G technologic requirements and key technology
174
Analysis of the 4-junction SQUID
175
Analysis of the 50 Ω-noise mismatch in microwave low-noise transistors
176
Analysis of the 5-cell single phase MMC natural balancing mechanism
177
Analysis of the 802.11e enhanced distributed channel access function
178
Analysis of the ABS Wheel Speed Signal Error and Method of Equal Period Sampling
179
Analysis of the AC electrical response for (Ba,Pb)TiO
3
positive temperature coefficient ceramics
180
Analysis of the AC free electron laser
181
Analysis of the AC loss measurements on the one-metre dipole model magnets for the CERN LHC
182
Analysis of the AC Voltage Distortion produced by Converter-Fed DC Drives
183
Analysis of the acceleration of non-redundant manipulators
184
Analysis of the acceleration sensor effect of symmetrical triple layer piezoelectric bimorph using three methods
185
Analysis of the accident based on low temperature, snowstorm, ice, coagulation
186
Analysis of the AC-contactor electrical behavior under voltage dips
187
Analysis of the Accounting Affairs of Provision for Impairment of Fixed Assets
188
Analysis of the accuracy of a LBL-based underwater localization procedure
189
Analysis of the accuracy of p.c.m. cascade coders
190
Analysis of the accuracy of the numerical reflection coefficient of the finite-difference time-domain method at planar material interfaces
191
Analysis of the accuracy-latency-energy tradeoff for wireless embedded camera networks
192
Analysis of the Achievable Rate for a Multiuser System with Multiple Antennas
193
Analysis of the acid sources of a field brittle fractured composite insulator
194
Analysis of the acidity of rainwater and characterization of precipitation runoff pollution from urban area after the once-in-a-century drought
195
Analysis of the acoustic signature of dungeness crabs (Cancer magister)
196
Analysis of the acoustooptic interaction in proton-exchanged lithium niobate [light deflectors]
197
Analysis of the acquisition process for keystroke dynamics
198
Analysis of the Actions of Nucleus Reuniens and the Entorhinal Cortex on EEG and Evoked Population Behavior of the Hippocampus
199
Analysis of the activation energy spectra of the induced anisotropy in amorphous Co
58
Ni
10
Fe
5
Si
11
B
16
200
Analysis of the activation of spinal nerves during magnetic stimulation of the lumbar area
201
Analysis of the activation propagation on both ventricles using tagged MRI
202
Analysis of the active-clamped soft-switched forward converter without output filter
203
Analysis of the actual current paths of an integrated matrix converter
204
Analysis of the actual measured results and numerical simulation of temperature and strain on small high-strength concrete members
205
Analysis of the Actual Response Rates in Mobile Advertising
206
Analysis of the Actuality and Obstacles of Organizational Learning Based on Knowledge Fermenting Theory
207
Analysis of the adaptive filter algorithm for feedback-type active noise control
208
Analysis of the adaptive matched filter algorithm for cases with mismatched clutter statistics
209
Analysis of the adaptive matched filter algorithm for cases with mismatched clutter statistics
210
Analysis of the adaptive modulation and coding algorithm with the multicode transmission
211
Analysis of the adaptive rate control for ABR service in ATM networks
212
Analysis of the adaptive space time processing technique for airborne radar
213
Analysis of the ADC resolution for radio astronomy applications
214
Analysis of the added value model of regional traffic and transport based on Spatial Econometrics
215
Analysis of the Additional Modulation of Semiconductor Lasers Using Optical Heterodyne Techniques
216
Analysis of the address and sustain discharges in an AC PDP cell using three-dimensional simulation
217
Analysis of the Address Power in PDPs with a Newly Developed Equivalent Circuit Model
218
Analysis of the adhesion effect in RF-MEMS switches using atomic force microscope
219
Analysis of the admittance of symmetrical triple-layer flexural piezoelectric vibrator
220
Analysis of the Adrenocortical Steady-State Characteristics
221
Analysis of the advantages and disadvantages of multi-turn railgun
222
Analysis of the advantages of an all SDS
(R)
gas box
223
Analysis of the Advantages of Using Tablet PC in e-Learning
224
Analysis of the AE signals parameter at the critical area on the concrete beam
225
Analysis of the Affection of Hash Function on the Performance of WM Algorithm
226
Analysis of the Agent-Get Problem in Hybrid Wireless Network
227
Analysis of the Air Damping in MEMS Lateral Driven Microresonators
228
Analysis of the airborne transmission lines and antennas coupling interference
229
Analysis of the airflow field and motion posture of seedling in orderly pneumatic rice seedling-throwing
230
Analysis of the air-gap asymmetry in axial-flux permanent magnet generators
231
Analysis of the airspace design trade space
232
Analysis of the airspace design trade space
233
Analysis of the Alamouti STBC MIMO System With Spatial Division Multiplexing Over the Rayleigh Fading Channel
234
Analysis of the all-electrical automatic gain control of travelling-wave semiconductor laser amplifiers
235
Analysis of the alternatives for stereo multiplex in 3DTV broadcast delivery
236
Analysis of the ambiguity function for phase-coded waveforms
237
Analysis of the AMC-ARQ System over MIMO Correlated Fading Channels
238
Analysis of the AMMON Experimental Program in the EOLE Facility Supporting the Qualification of the JHR Neutron and Photon Tools
239
Analysis of the AMMON experimental program in the EOLE facility supporting the qualification of the JHR neutron and photon tools
240
Analysis of the Ampacity Characteristic of Single-Core AC Cable Laid in Water
241
Analysis of the amplifier-servomotor by a graphoanalytical method
242
Analysis of the amplitude and frequencies of the voltage magnification transients in distribution networks due to capacitor switching
243
Analysis of the angles in hip, knee and ankle during the pedaling of a Cross Country Olympic cyclist
244
Analysis of the angular sensitivity of an innovative particle velocity sensor
245
Analysis of the Ankle Functional Instability Based on the Three-Dimensional Shape of Ankle Posture
246
Analysis of the anklebot training as a method for reducing lower-limb paretic impairment a case study in electromyography
247
Analysis of the Annual Performance of Bifacial Modules and Optimization Methods
248
Analysis of the annular-ring-loaded circular-disk microstrip antenna
249
Analysis of the antenna array-aided multicarrier DS-CDMA RAKE system with synchronous uplink transmission
250
Analysis of the antenna coupling between electronic information equipment for intersystem EMC prediction
251
Analysis of the antenna in proximity of human body base on the dual-grid FDTD method
252
Analysis of the Antenna Stochastic Effective Gain in Mobile Environments
253
Analysis of the anti-interference performance of multi-beam satellite antenna
254
Analysis of the AO-FDPC optical heterodyne technique for microwave time delay and phased array beamsteering applications
255
Analysis of the Apodization Parameter of Linearly Chirped Bragg Gratings for Dispersion Compensation
256
Analysis of the applicability of performance measurement method for XBRL implementation in the enterprises
257
Analysis of the applicability of RFID & wireless sensors to manufacturing and distribution lines trough a testing multi-platform
258
Analysis of the Applicability of the Diode Equivalent Model for GIGS Thin-Film Photovoltaic Modules
259
Analysis of the applicability of the IDEF-SIM modeling technique to the stages of a discrete event simulation project
260
Analysis of the Application of Different Production and Material Flow Mechanisms on Construction Sites
261
Analysis of the application of engineering software Pro/E in engineering analysis and manufacture
262
Analysis of the application of high-speed reclosing breakers to transmission systems
263
Analysis of the application of high-speed reclosing breakers to transmission systems
264
Analysis of the Application of High-Speed Reclosing Breakers to Transmission Systems
265
Analysis of the Application of Network Multimedia in Higher Education
266
Analysis of the application of passive solar collecting approaches for rural house in super-cold areas of China
267
Analysis of the application of traditional meaning in computer design logo
268
Analysis of the application of trellis coding to spread spectrum multiple access systems
269
Analysis of the Applications and Characteristics of Ad Hoc Networks
270
Analysis of the approaches to dialogue system development and their realisation in interactive graphical schematic editor of "Micro-PC" circuit simulator
271
Analysis of the approximate differential equation in one-dimensional model of the brain cortex dynamics
272
Analysis of the approximation of time series trend and forecasting based on it
273
Analysis of the ARB (adaptive rate based) congestion avoidance algorithm
274
Analysis of the Arbitrarily Shaped Waveguide by Polynomial Approximation
275
Analysis of the arc formed along the surface of a flat plate immersed in a laminar flow of gas
276
Analysis of the arc mode operation of the cesium vapor thermionic energy converter
277
Analysis of the arcing process in on-load tap changers by measuring the acoustic signature
278
Analysis of the Arithmetic Mean CFAR Normalizer for Fluctuating Targets
279
Analysis of the arterial diameter variation wave in radial artery by means of fuzzy logic
280
Analysis of the arterial pressure-volume curve in the three-element windkessel model
281
Analysis of the Asia-Pacific TWSTFT network
282
Analysis of the assistance characteristics for the plantarflexion torque in elderly adults wearing the powered ankle exoskeleton
283
Analysis of the assumed cost of penalty payments in a municipal MV distribution network
284
Analysis of the asymmetrical half-bridge for street LED-lighting applications
285
Analysis of the asymmetrical operation of dual three-phase induction machines
286
Analysis of the asymmetry of railgun system
287
Analysis of the asymptotic iterative decoding performance of turbo codes
288
Analysis of the asymptotic relative efficiency of the MUSIC algorithm
289
Analysis of the ATDMA/PRMA++ protocol in a mobile satellite system environment
290
Analysis of the ATLAS Rome production experience on the LHC computing grid
291
Analysis of the ATLAS RPCs ROD timing performance with an embedded microprocessor
292
Analysis of the Atmospheric Electric Circuit using the Finite Element Method
293
Analysis of the atrial repolarisation phase of the electrocardiogram in health and in atrial fibrillation
294
Analysis of the Attenuation Caused by the Influence of Orography in the Medium Wave Band
295
Analysis of the attenuation ratio of MQW optical intensity modulator for 1.55 μm wavelength taking account of electron wave function leakage
296
Analysis of the Attraction Model of the PRC White-Collar Workers´ Migration
297
Analysis of the Audible Noise of Three-Phase Squirrel-Cage Induction Motors Supplied by Inverters
298
Analysis of the Authenticated Query Flooding Protocol by Probabilistic Means
299
Analysis of the Authentication Protocols Based on Game Theory
300
Analysis of the Automatic Detection of Critical Epochs from coma-EEG by Dominant Components and Features Extraction
301
Analysis of the automatic frequency control in heterodyne optical receivers
302
Analysis of the Availability of Composite Web Services
303
Analysis of the avalanche effect of the AES S box
304
Analysis of the avalanche property of the KASUMI algorithm
305
Analysis of the average power to distance decay rate at the 60 GHz band
306
Analysis of the averaging for the dc/ac half-bridge converter and the three-level half-bridge neutral point clamped
307
Analysis of the averaging technique in flash ADCs
308
Analysis of the awareness of collaborative e-learning (CeL) in Sri Lankan university education
309
Analysis of the axial dipole antenna propagation characteristics in rectangular tunnel
310
Analysis of the azimuth resolution of bistatic SAR
311
Analysis of the b2 correction in the Tevatron
312
Analysis of the B2C Online Travel in China: Using Mangocity.com as an Example
313
Analysis of the back gate effect on the breakdown behaviour of SOI LDMOS transistors
314
Analysis of the Back-Gate Effect in Normally OFF p-GaN Gate High-Electron Mobility Transistor
315
Analysis of the Back-Gate Effect on the on-State Breakdown Voltage of Smartpower SOI Devices
316
Analysis of the Back-Gate Effect on the On-State Breakdown Voltage of Smartpower SOI Devices
317
Analysis of the backpropagation algorithm using linear algebra
318
Analysis of the back-propagation algorithm with momentum
319
Analysis of the backreflected signal in an all-fiber bandpass Bragg transmission filter
320
Analysis of the Backscattering Coefficient of Salt-Affected Soils Using Modeling and RADARSAT-1 SAR Data
321
Analysis of the Backward-Wave Traveling-Wave Tube
322
Analysis of the Balance of the Production Line Based on the Gearbox Assembly Process
323
Analysis of the ballistocardiographic artifact removal in simultaneous EEG-fMRI recording using independent component analysis and coherence function
324
Analysis of the bandgap of negative refractive index photonic crystal fiber
325
Analysis of the Bargain Power under Clean Development Mechanism with Game Theory
326
Analysis of the barrier in vertically-stacked interface-treated Josephson junctions
327
Analysis of the base current and saturation voltage in 4H-SiC power BJTs
328
Analysis of the base station configuration in the system of remote time comparison based on satellite common-view
329
Analysis of the Basic Connotation of PIN-bonding Sport Training Theory
330
Analysis of the basic software for the electronic commerce system
331
Analysis of the battery performance in hybrid electric vehicle for different traction motors
332
Analysis of the BDF using caustics of parabolic reflector antennas
333
Analysis of the beam-loading conductance in three-gap coupled cavity
334
Analysis of the Bearing Capacity and Countermeasures of Electricity Price in High-Energy Consuming Enterprises
335
Analysis of the bearingless AC homopolar motor
336
Analysis of the beat frequency oscillation in voltage regulators
337
Analysis of the beat noise induced by the lock-in detection in Brillouin optical correlation domain analysis
338
Analysis of the behavior of a dynamic latch comparator
339
Analysis of the behavior of a manufacturing cell with cyclic feeding policies
340
Analysis of the Behavior of an Optical Current Transformer Using an Equivalent Circuit
341
Analysis of the behavior of coupled loudspeakers in a MIMO ANC system in an enclosure
342
Analysis of the behavior of electric vehicle charging stations with renewable generations
343
Analysis of the Behavior of Fund Investment in China on the Basis of LSV Herding Measure
344
Analysis of the Behavior of Integrated Schottky Logic in Neutron, Total Dose and Dose Rate Environments
345
Analysis of the behavior of ions produced by pulsed corona discharge
346
Analysis of the behavior of ions produced by pulsed corona discharge
347
Analysis of the Behavior of Self-Similar Traffic in a QoS-Aware Architecture for Integrating WiMAX and GEPON
348
Analysis of the behavioral styles of ET students and the inherent implications of this knowledge
349
Analysis of the behaviour of a circular conveyor
350
Analysis of the behaviour of different 2D interpolation techniques using an adaptive-pilot symbol aided OFDM wireless systems
351
Analysis of the behaviour of fusing systems in the presence of nonlinear loads
352
Analysis of the Behaviour of Genetic Algorithm Applied in Optimization of Electrical System Design for Offshore Wind Farms
353
Analysis of the behaviour of LEC structures applied to multiepitaxial silicon power transistors
354
Analysis of the behaviour of superconducting windings with short-circuited turns
355
Analysis of the behaviour of thermally coupled transistors in a differential amplifier
356
Analysis of the Belluno Industrial District by Means of a Questionnaire
357
Analysis of the benefits and constraints for the implementation of Cloud Computing over an EHRs system
358
Analysis of the benefits of Superposition Coding in random wireless networks
359
Analysis of the Bertoni-Walfisch propagation model for mobile radio
360
Analysis of the best path on the campus of Northeast Forestry University
361
Analysis of the Better Directed Progression routing protocol for industrial ad-hoc multi-hop mesh networks
362
Analysis of the Biasing Conditions and Latching Operation for Si/SiGe Resonant Interband Tunnel Diode Based Tunneling SRAM
363
Analysis of the bilateral filter
364
Analysis of the bioinformatics grid technique applications in China
365
Analysis of the biological medium parameters action on the insertion voltage of eddy current converter
366
Analysis of the biomedical signals´ structure in the problem of recognition
367
Analysis of the bi-orthogonal modulation system using two different inner sequences
368
Analysis of the Bipartite Networks of Domain Compositions and Metabolic Reactions
369
Analysis of the Bipolar Current Mirror Including Electrothermal and Avalanche Effects
370
Analysis of the biquadratic and bilinear noncoherent receivers over two-path Rayleigh fading with known amplitudes
371
Analysis of the birefringence properties of optical fibers made by a preform deformation technique
372
Analysis of the BitTorrent Protocol Modified with Fountain Code
373
Analysis of the BitTorrent Protocol Modified with Multicast
374
Analysis of the blackout in Europe on November 4, 2006
375
Analysis of the blazing effect in second-order gratings
376
Analysis of the Bloch oscillating transistor
377
Analysis of the Body Diode Reverse Recovery of MOSFETs in ZVS PWM Combined Three-level Converter
378
Analysis of the body proximity cross-polarization power ratio in a human walking motion
379
Analysis of the Body Proximity Cross-Polarization Power Ratio in a human walking motion
380
Analysis of the Bologna cross radio telescope
381
Analysis of the boost constant-frequency quasi-square-wave converters
382
Analysis of the boost zero-current-switched quasi-square-wave converter
383
Analysis of the Bottleneck of Mobile E-commerce in ChongQing Based on PEST Analytical Method
384
Analysis of the bounces on the power/ground plane structures by planar circuit model and APA-E algorithm
385
Analysis of the Braking Behaviour in Pedestrian Automatic Emergency Braking
386
Analysis of the Brazilian Digital TV System (BDTVS) and Signal-Converting Devices
387
Analysis of the Brazilian Electric power System considering the new 500 MW interconnection with Uruguay
388
Analysis of the breakdown fault in field voltage withstand test of 500kV SF
6
current transformer
389
Analysis of the breakdown of order in optical pattern formation
390
Analysis of the breakdown of the IQHE in wide GaAs/AlGaAs heterostructures
391
Analysis of the breakdown phenomena in GaAs MESFETs
392
Analysis of the breakdown spots spatial distribution in large area MOS structures
393
Analysis of the breaking capacity of auxiliary switch for the operation control of high-voltage circuit breaker
394
Analysis of the breathing pattern in elderly patients using the hurst exponent applied to the respiratory flow signal
395
Analysis of the bridge magnetic servo amplifier
396
Analysis of the Bridged T-Coil Circuit Using the Extra-Element Theorem
397
Analysis of the Brillouin gain spectrum in a graded-index multimode fiber
398
Analysis of the broad-side coupled lines on the vertical substrate using the numerical conformal transformations
399
Analysis of the BSIMSOI threshold voltage model for short channel PD-SOI DTMOS
400
Analysis of the Bubbling Effect in Synchronized Networks With Semiconductor Lasers
401
Analysis of the buck converter for scaling the supply voltage of digital circuits
402
Analysis of the Buck Converter for Scaling the Supply Voltage of Digital Circuits
403
Analysis of the build up of oscillations in self-induced photorefractive light resonators
404
Analysis of the building energy efficiency market based on asymmetric game
405
Analysis of the bullwhip effect based on different information sharing models
406
Analysis of the Bullwhip Effect Phenomenon Based on Principal-Agent Theory
407
Analysis of the Bullwhip in a Hybrid System with Manufacturing/Remanufacturing
408
Analysis of the business customer churn based on decision tree method
409
Analysis of the Business Effects of Software Architecture Refactoring in an Automotive Development Organization
410
Analysis of the business model innovation of the technology of internet of things in postal logistics
411
Analysis of the Business Risks for the Software Outsourcing between Hongkong and Guangdong
412
Analysis of the by-pass resistance of an active crowbar for doubly-fed induction generator based wind turbines under grid faults
413
Analysis of the By-Products in the Ammonia Production From Urea by Dielectric Barrier Discharge
414
Analysis of the Cable Firing System for HVDC Thyristor Values
415
Analysis of the Canadian boreal forest using enhanced resolution ERS-1 scatterometer imagery
416
Analysis of the capability of casing tripping in horizontal well
417
Analysis of the capacity enhancement of cellular systems using multiuser receivers and multiple power zones
418
Analysis of the capacity for a Markovian multiple access channel
419
Analysis of the capacity region for the non-cooperative multiaccess channel with Rician fading
420
Analysis of the Capacity Statistics for 2
2 3D MIMO Channels in Short-Range Communications
421
Analysis of the Capture Probability in Wireless Systems with Multi-Packet Reception Capabilities and Successive Interference Cancellation
422
Analysis of the cardiac repolarization period using the KL transform: applications on the ST-T database
423
Analysis of the career path and skills required by project managers: An energy sector perspective
424
Analysis of the carrier and temperature distributions in gate turn-off thyristors by internal laser deflection
425
Analysis of the carrier-induced FM response of DFB lasers: theoretical and experimental case studies
426
Analysis of the Cathode Spot of Metal Vapor Arcs
427
Analysis of the cause of bursting on bottom slab of long span prestrssed concrete box girder bridge
428
Analysis of the Causes and Effects of the Global Financial Crisis and Lessons Learned
429
Analysis of the causes of field-effect and photovoltaic semiconductor device parameters degradation
430
Analysis of the causes of hazards associated with the train movement in track section
431
Analysis of the Causes of Juvenile Delinquency - Based on the Sociological Angle
432
Analysis of the caustic region field of a PEMC spherical reflector placed in chiral medium
433
Analysis of the cavity geometric effect of liquid-phase epitaxy process
434
Analysis of the CDF biorthogonal MRTD method with application to PEC targets
435
Analysis of the CdTe Hole Concentration and the Hole Mobility
436
Analysis of the cell averaging CFAR in Weibull background using a distribution approximation
437
Analysis of the censored-mean level CFAR processor in multiple target and nonuniform clutter
438
Analysis of the Centralized Algorithm and the Distributed Algorithm for Parallel Packet Switch
439
Analysis of the change characteristics and the weather effect mechanism of reference evapotranspiration in Manasi oasis
440
Analysis of the change in mineral dust optical over the Eastern Mediterranean with source location using SEAWIFS imagery
441
Analysis of the Changing Microbial Phase in an Underground River Anaerobic Digestion Reactor
442
Analysis of the Channel Access Mechanism in IEEE 802.11 Wireless Local Area Networks
443
Analysis of the Channel Allocation Problem in Broadband Power Line Communications Access Networks
444
Analysis of the channel bit-rate detection process in WCDMA
445
Analysis of the Channel Energy Capture in Ultra-Wideband Transmitted Reference Systems
446
Analysis of the channel inversion layer capacitance in the very thin-gate IGFET
447
Analysis of the channel power delay profile of WBAN scenarios in various indoor environments
448
Analysis of the channel time response from modal filtering and array beamforming: application to ocean tomography
449
Analysis of the chaotic characteristics of sleep EEG patterns from dominant Lyapunov exponents
450
Analysis of the Chaotic Dynamics of Counter-Propagating Solitons
451
Analysis of the chaotic nature of speech prosody and music
452
Analysis of the chaotic phenomena in permanent-magnet synchronous motors based on Poincare map
453
Analysis of the chaotic regime for DC-DC converters under current-mode control
454
Analysis of the characteristic about the Honghe active fault zone based on the ETM+ remote sensing images
455
Analysis of the characteristic and the driving force of island-town spatial expansion: A case study in Pingtan County
456
Analysis of the characteristic of rainfall attenuation of microwave and calculation module simulation
457
Analysis of the Characteristic of Spots in Square Superlattice Pattern by Image Processing
458
Analysis of the Characteristic of the Kalman Gain for 1-D Chaotic Maps in Cubature Kalman Filter
459
Analysis of the characteristic of vector hydrophone´s inner sound field
460
Analysis of the characteristics by modeling and simulation of actuator in flight control system
461
Analysis of the characteristics in metal-material with negative permittivity
462
Analysis of the Characteristics of a Coaxial Gyrotron Cavity With a Tilted Inner Rod
463
Analysis of the characteristics of a fiber-optic ring resonator used as a Brillouin active delay line
464
Analysis of the Characteristics of Adaptive Systems
465
Analysis of the Characteristics of an Earthed Fin Line
466
Analysis of the characteristics of demands and incentive methods of knowledge staff
467
Analysis of the Characteristics of Electrooculogram Applied a Battery Model to the Eyeball
468
Analysis of the Characteristics of Fly Ash from Hospital Solid Waste Incinerations
469
Analysis of the characteristics of gas insulated, multiple-stage, high voltage switches
470
Analysis of the characteristics of geological environment based on RS and GIS in Lijiang City
471
Analysis of the Characteristics of Gyro-TWT with Helical Corrugation
472
Analysis of the characteristics of piezoelectric sensor and research of its application
473
Analysis of the Characteristics of PVA-Coated LPG-Based Sensors to Coating Thickness and Changes in the External Refractive Index
474
Analysis of the characteristics of scanning phased arrays with broadband and wide angle
475
Analysis of the characteristics of single phase shaded pole induction motor with two short-circuited auxiliary phases
476
Analysis of the characteristics of the disk type single phase SRM
477
Analysis of the characteristics of the electric-powered later torque-vectoring differential
478
Analysis of the Characteristics of the New Converter Transformer Based on the Matrix Model
479
Analysis of the characteristics of the pneumatic active suspension system in shinkansen
480
Analysis of the characteristics of the radiation from the open end of an oblique waveguide filled with a limitless dielectric plate
481
Analysis of the characteristics of TOADs subject to frequency-detuned control and signal picosecond pulses
482
Analysis of the characteristics with increasing the number of QWs for near-ultraviolet LEDs
483
Analysis of the charge imbalance occurring on a body in free flight
484
Analysis of the charge pumping technique and its application for the evaluation of MOSFET degradation
485
Analysis of the charge transfer of models for electrostatic discharge (ESD) and semiconductor devices
486
Analysis of the charge/discharge processes for the basic ESD models
487
Analysis of the charging problem in capacitive micro-machined ultrasonic transducers
488
Analysis of the Chinese stock market correlations in high frequency data
489
Analysis of the Chlorophyll a Fluorescence Transient of Spirodela polyrhiza by JIP-Test
490
Analysis of the chosen speed and flux estimators for sensorless induction motor drive
491
Analysis of the CICC Performance Through the Measurement of the Thermal Strain Distribution of the
Filaments in the Cable Cross Section
492
Analysis of the Circuit-Field Interactions in Propagating Spin-Wave Experiments
493
Analysis of the circular polarization brancher on metal-dielectric strip waveguide
494
Analysis of the circular polarization coupler broadbandness
495
Analysis of the Circular Volt-Detecting Method of Individual Cells Involved in the Supercapacitor Bank
496
Analysis of the CISPR 25 component test setup
497
Analysis of the claimed robustness for PI/PID robust tuning rules
498
Analysis of the class AD audio amplifier including hysteresis effects
499
Analysis of the class AD audio amplifier including hysteresis effects
500
Analysis of the Class DE Inverter With Thinned-Out Driving Patterns
501
Analysis of the class E amplifier with two current sources used as a high-power-factor electronic ballast for fluorescent lamps
502
Analysis of the class E amplifier with two current sources used as a high-power-factor electronic ballast for fluorescent lamps
503
Analysis of the class of complex-valued error adaptive normalised nonlinear gradient descent algorithms
504
Analysis of the Clinotron Slow-Wave Structure
505
Analysis of the Cloud Computing Paradigm on Mobile Health Records Systems
506
Analysis of the clover-shaped geometry for a Hall generator
507
Analysis of the cluster size in coordinated multipoint transmission
508
Analysis of the clustering properties of the Hilbert space-filling curve
509
Analysis of the CMOS differential amplifier with active load and single-ended output
510
Analysis of the coaxial helical-groove slow-wave structure
511
Analysis of the coaxial ridged disk-loaded slow-wave structures
512
Analysis of the Coaxial-Aperture-Fed Dielectric Resonator Antenna
513
Analysis of the code allocation mechanism in the WCDMA
514
Analysis of the code masking efficiency of chaotic clocks in microcontroller applications
515
Analysis of the coding performance and performance of anti-jamming of JTIDS
516
Analysis of the coefficients of generalized bilinear transformation in the design of 2-D band-pass and band-stop filters and an application in image processing
517
Analysis of the co-emergence process on the human-human cooperation
518
Analysis of the co-emergence process on the human-human cooperation
519
Analysis of the Coexistence of Monopoly and Competition in Online Services Providers Market
520
Analysis of the cogging torque behavior of a two-phase axial flux permanent magnet synchronous machine
521
Analysis of the COLD Uniform Linear Array
522
Analysis of the colon by the biodynamic model and application to the colonoscope robot design
523
Analysis of the combined effects of finite samples and model errors on array processing performance
524
Analysis of the combined effects of finite samples and model errors on array processing performance
525
Analysis of the Combined Effects of Load Cycling, Thermal Transients, and Electrothermal Stress on Life Expectancy of High-Voltage AC Cables
526
Analysis of the combined impact of small-scale wind generators and electric vehicles on future power networks
527
Analysis of the combined Maglev levitation, propulsion, and guidance system
528
Analysis of the combined use of wind and pumped storage systems in autonomous Greek islands
529
Analysis of the combustion driven linear generator for electric gun applications
530
Analysis of the commission test and operation record of the 400 MW evaporation-cooling hydrogenerator of Lijiaxia power plant
531
Analysis of the common-mode induced differential-mode distortion in Gm-C filters
532
Analysis of the common-mode rejection in the measurement and generation of magnetic fields using loop probes
533
Analysis of the communication between players in music ensemble
534
Analysis of the commutation currents for a sinusoidal BLDC motor
535
Analysis of the commutation torque ripple effect for BLDCM fed by HCRPWM-VSI [brushless DC motors]
536
Analysis of the compatibility in an interlaboratory comparison process
537
Analysis of the Competition and Tariff under Monopolistic Competition Condition
538
Analysis of the competition between wired, DSL and wireless users in an access network
539
Analysis of the Competition-Cooperation Relations among the Supply Chain Enterprises Using Grey Controlling Theory
540
Analysis of the complete spectrum of acoustic waves on 36° rot YX-LiTaO
3
by means of Wigner distribution
541
Analysis of the Completion Time for the Job Processed on a Machine Subject to Stochastic Breakdowns
542
Analysis of the Complex Dielectric Permittivity Behavior of Composites based on Al
2
O
3
/AIN and Precursor-Derived-SiC in the 1 MHz 18GHz Frequency Range
543
Analysis of the Complex Permeability Versus Frequency of Soft Magnetic Composites Consisting of Iron and
${\rm Fe}_{73}{\rm Cu}_{1}{\rm Nb}_{3}{\rm Si}_{16}{\rm B}_{7}$
544
Analysis of the complex permittivity and permeability of a Martian soil simulant from 10 MHz to 1 GHz
545
Analysis of the complex sign regressor least mean fourth adaptive algorithm
546
Analysis of the complex system of technological innovation based on IDFE0 method
547
Analysis of the complex voltage unbalance factor behavior resulting from the variation of voltage magnitudes and angles
548
Analysis of the complexity of EEG during the short-term memory task
549
Analysis of the complexity of precedence graphs for assembly and task planning
550
Analysis of the complexity of remote sensing image and its role on image classification
551
Analysis of the composite superprism demultiplexer
552
Analysis of the compound slot array in a broadwall of a rectangular waveguide using Galerkin method
553
Analysis of the compression characteristics of a PEM stack, development of an equivalent spring model and recommendations for compression process improvements
554
Analysis of the compression of the spectral density of a surface EMG signal by methods based on the FFT
555
Analysis of the Computation Techniques for Energy Flow Problem Solving
556
Analysis of the computational and storage requirements for the minimum-distance decoding of convolutional codes
557
Analysis of the Computational Cost of Approximation-Based Hybrid Evolutionary Algorithms in Electromagnetic Design
558
Analysis of the computational requirements of a pulse-Doppler radar signal processor
559
Analysis of the concentric planetary magnetic gear with strengthened stator and interior permanent magnet (IPM) inner rotor
560
Analysis of the Concentric Planetary Magnetic Gear With Strengthened Stator and Interior Permanent Magnet Inner Rotor
561
Analysis of the concept of redundancy concerning the design of multimodal combinations of output-elements
562
Analysis of the Concept of Urban Rail Transit Based City Logistics System
563
Analysis of the concurrent model of train station based on Petri net
564
Analysis of the condition based monitoring system for heavy industrial machineries
565
Analysis of the conditional skip instructions of the HP Precision Architecture
566
Analysis of the conditions for worst case switching activity in integrated circuits
567
Analysis of the Conducted Interfering Mechanism within SVC-based substations
568
Analysis of the Conducted Interfering Mechanism within SVC-based substations
569
Analysis of the conduction boundary of a boost PFP fed by universal input
570
Analysis of the conductor-backed coplanar waveguide by an alternative formulation of the transverse resonance technique
571
Analysis of the conflict between close-loop control and the current-sharing of ac parallel inverters and parallel control strategy
572
Analysis of the conical tracking technique in LEO satellite stations
573
Analysis of the conically conformal microstrip antennas by CFDTD method and its parallelization
574
Analysis of the conjugate gradient matched filter
575
Analysis of the connection of a microturbine to a low voltage grid
576
Analysis of the connection redundancy in functional networks from high-resolution EEG: A preliminary study
577
Analysis of the consequences of data quality and calibration on 3D HDR image generation
578
Analysis of the Constriction Resistance in an ACF Bond
579
Analysis of the Construction of Virtual Leaning Community Based on the Autonomous Learning Model
580
Analysis of the Consumer Preferences toward M-Commerce Applications Based on an Empirical Study
581
Analysis of the contact-less power supply for a moving load
582
Analysis of the contactless power transfer system using modelling and analysis of the contactless transformer
583
Analysis of the Contention Access Phase of a Reservation MAC Protocol for Wide-Area Data Intensive Sensor Networks
584
Analysis of the contextuality paradox using weak measurement statistics
585
Analysis of the contraction of fibroblast-collagen gels and the traction force of individual cells by a novel elementary structural model
586
Analysis of the contractivity factor in fractal based face recognition
587
Analysis of the Contribution of Different Sources to SO2 Concentration in the Shanghai Expo Planning Area
588
Analysis of the contribution of flight plan route selection to delays and conflicts
589
Analysis of the control algorithms of voltage-source converter HVDC
590
Analysis of the control limit for rotor-side converter of doubly fed induction generator-based wind energy conversion system under various voltage dips
591
Analysis of the control limit of crowbar-less LVRT methods for DFIG-based wind power systems under asymmetrical voltage dips
592
Analysis of the control of chaos in unidimensional maps
593
Analysis of the control on designed to anchor the right values in modeling based on the finite element method
594
Analysis Of The Controllability Of A Sub-Micron CMOS Process Using TCAD
595
Analysis of the controller and identification algorithm gains for closed-loop identification applied to a perturbed DC servomechanism working under PD control
596
Analysis of the convergence and divergence of a constrained anti-Hebbian learning algorithm
597
Analysis Of The Convergence Behavior Of Adaptive Distributed-arithmetic Echo Cancellers
598
Analysis of the convergence behavior of adaptive distributed-arithmetic echo cancellers
599
Analysis of the convergence behavior of the complex Gaussian kernel LMS algorithm
600
Analysis of the Convergence between DVB-SH and ETSI SDR
601
Analysis of the Convergence of the Fixed-Point Method Used for Solving Nonlinear Rotational Magnetic Field Problems
602
Analysis of the Convergence Process by EXIT Charts for Parallel Implementations of Turbo Decoders
603
Analysis of the convergence properties of a self-normalized source separation neural network
604
Analysis of the convergence properties of self-normalized source separation neural networks
605
Analysis of the convergence properties of topology preserving neural networks
606
Analysis of the conversion efficiencies of β-FeSi
2
and BaSi
2
solar cells
607
Analysis of the Conversion to the First Stokes in Cladding-Pumped Fiber Raman Amplifiers
608
Analysis of the Coordination Degree of the Society, Economy, Resources and Environment in ShenFu Coal Mining Area
609
Analysis of the coordination level of urban passenger transport system
610
Analysis of the cord layer´s influence on the air spring´s lateral stiffness
611
Analysis of the Core Team Role in Open Source Communities
612
Analysis of the coreless transformer in wireless battery vehicle charger
613
Analysis of the correlation between antenna gain and SAR Levels inside the human head model at 900MHz
614
Analysis of the Correlation between Local Field Potentials and Neuronal Firing Rate in the Motor Cortex
615
Analysis of the Correlation between Particulate Matter Concentrations and Traffic Volume in the Metropolitan City of Ulsan, Korea
616
Analysis of the correlation between the ambulatory arterial stiffness index, circadian rhythm and TCM syndrome differentiation in patients with essential hypertension
617
Analysis of the Correlation between the Facial Temperature and the Stenosis of Carotid Arteries
618
Analysis of the Correlation Between the Programmed Threshold-Voltage Distribution Spread of nand Flash Memory Devices and Floating-Gate Impurity Concentration
619
Analysis of the correlation between ventricular depolarization events and heart rate in normal subjects using signal-averaged ECG
620
Analysis of the Correlation Coefficient Between Component Noise Squared Norms for OFDM Systems
621
Analysis of the Correlation Effect on Hi-Tech Business Incubators Cluster in China
622
Analysis of the correlation properties of digital satellite signals and their applicability in bistatic remote sensing
623
Analysis of the cost of electric energy discharged to the grid by some energy storage systems
624
Analysis of the Cost per Kilowatt Hour to Store Electricity
625
Analysis of the cost per kWh to store electricity
626
Analysis of the cost variance with moving weighted average method in logistics
627
Analysis of the Cost/Performance Tradeoffs of SSL Acceleration
628
Analysis of the cost-effective digital radio over fiber system in the NG-PON2 context
629
Analysis of the Count-Min Sketch Based Anomaly Detection Scheme in WSN
630
Analysis of the coupled chassis-antenna modes in mobile handsets
631
Analysis of the coupled electromagnetic and mechanical problem arising with the radial slot wedge fixing of slot conductors in large electrical machines
632
Analysis of the coupled linear hybrid automata dynamics
633
Analysis of the coupling between degenerate modes of enclosed rectangular microstrip patches
634
Analysis of the coupling between small ring-type coils used in adaptable-size burners for domestic induction heating hobs
635
Analysis of the coupling characteristics of a tapered coupled waveguide system
636
Analysis of the coupling characteristics of a tapered three-guide coupled system
637
Analysis of the Coupling Coefficient Between a Cylindrical Dielectric Resonator and a Fin-Line
638
Analysis of the Coupling Effect in Different Meander-Type Winding Planar Transformers
639
Analysis of the Coupling Field Inside a Rectangular Shielded Enclosure with an Aperture
640
Analysis of the Coupling Mechanism in Asymmetric Fused Fiber Couplers
641
Analysis of the coupling of an incident wave with a wire inside a cavity using an FEM in frequency and time domains
642
Analysis of the coupling optical fiber ultrasonic sensor for partial discharges detection
643
Analysis of the coupling path between transient EM interferences produced by the catenary-pantograph contact and on-board railway communication antennas
644
Analysis of the CPU utilization for point-to-point communication operations in a Beowulf cluster system
645
Analysis of the Cramer-Rao Bound Integrating a Prior-Knowledge
646
Analysis of the criteria of activation-based inverse electrocardiography using convex optimization
647
Analysis of the critical rise time in MOBILE-based circuits
648
Analysis of the critical thickness of water film for driving on road surface in rainy condition
649
Analysis of the cross market conduction mechanism of the risk of foreign disinvestment
650
Analysis of the cross polarization for reduced-size folded antennas
651
Analysis of the cross-coupled lateral mode in a twin-stripe four-contact laser with diagonal current injection
652
Analysis of the cross-phase modulation effect in WDM optical systems
653
Analysis of the cross-phase modulation in dispersion compensated WDM optical fiber systems
654
Analysis of the Cross-Sectional Width of the Optical Phase Conjugation Refocusing of Light Multiply Scattered Through Macroscopic Random Media
655
Analysis of the crosstalk in electromagnetic band-gap structure
656
Analysis of the cross-target measurement fusion likelihood for RSSI-based sensors
657
Analysis of the cryogenic continuous film memory
658
Analysis of the C-shaped compliant section
659
Analysis of the cumulative effect of pollution in the atmospheric environment management based on the method of ANP embedding into SWOT
660
Analysis of the cumulative probability distribution of the stroke angle in lightning incidence to three-phase overhead transmission lines
661
Analysis of the Current Charge and Discharge Characteristics of a Small-Scale Turn-to-Turn Soldered HTS Coil
662
Analysis of the Current Difference among Coils Connected Parallel of Single Phase EHV Power Transformer
663
Analysis of the current distribution between paralleled capacitors in a chopper on printed circuit board
664
Analysis of the current distribution in the ITER CS-insert model coil conductor by self field measurements
665
Analysis of the current distribution induced on a victim wire by a differential voltage source applied onto a twisted pair cable
666
Analysis of the current runaway phenomenon in the overcurrent limited mode of the DC-DC converter with current-injected control
667
Analysis of the current transport mechanism of copper phthalocyanine Organic Static Induction Transistor
668
Analysis of the Current Waveforms Observed in Underwater Spark Discharges
669
Analysis of the current waveforms observed in underwater spark discharges
670
Analysis of the Current-Confined-Paths in the Film Plane for CPP-GMR Films
671
Analysis of the Current-Fed Push-Pull Parallel Resonant Inverter Implemented with Unidirectional Switches
672
Analysis of the currents induced in a general wire cross by a plane wave incident at an angle with arbitrary polarization
673
Analysis of the current-voltage characteristics of Silicon on Ferroelectric Insulator Field Effect Transistor (SOF-FET)
674
Analysis of the curved permanent magnet linear machine for a golf swing training system
675
Analysis of the Curved Surface on Surface Roughness Measurement Using Dichromatic Speckle Pattens
676
Analysis of the C-V characteristic in SiO
2
/GaN MOS capacitors
677
Analysis of the cycle-structure of LDPC codes based on Latin squares
678
Analysis of the cyclic motion of asymmetric gait
679
Analysis of the cyclic short-term variation of indoor power line channels
680
Analysis of the cylindrical confocal laser resonator having a single circular coupling aperture
681
Analysis of the cylindrical PML ABC for 2-D finite volume simulations in the frequency domain
682
Analysis of the cylindrical-rectangular patch antenna
683
Analysis of the Damping Performance for Semi-rigid Suspended Structure
684
Analysis of the data streams trend in sensor network based on sliding window
685
Analysis of the data-reusing LMS algorithm
686
Analysis of the DC Bias Phenomenon by the Harmonic Balance Finite-Element Method
687
Analysis of the DC bias phenomenon by the harmonic balance method based on the electromagnetic coupling model
688
Analysis of the DC breakdown in sintered titanates
689
Analysis of the DC conductivity of the quasi-one-drviensional charge density wave conductor (fluorantbene)/sub 2/X
690
Analysis of the DC dynamics of VSC-HVDC systems connected to weak AC grids using a frequency domain approach
691
Analysis of the dc dynamics of VSC-HVDC systems using a frequency domain approach
692
Analysis of the DC link current spectrum in force commutated inverters
693
Analysis of the DC side sudden short circuit of three-phase/twelve-phase synchronous generator system
694
Analysis of the DCIV peaks in electrically stressed pMOSFETs
695
Analysis of The DC-Link Capacitance Requirement in High Level MCVSI
696
Analysis of the DC-Link Capacitor Current of Power Cells in Cascaded H-Bridge Inverters for High-Voltage Drives
697
Analysis of the DC-link capacitor voltage spectrum in the cascaded multilevel STATCOM
698
Analysis of the DC-link current spectrum in voltage source inverters
699
Analysis of the dc-link stability for the stacked polyphase bridges converter
700
Analysis of the DCT coefficient distributions for document coding
701
Analysis of the decision delay effect on the convergence of gradient recursive decision feedback equalizers
702
Analysis of the decision rule in Epstein´s Agent-Based model of civil violence
703
Analysis of the Decision-Directed SNR Estimator for Speech Enhancement With Respect to Low-SNR and Transient Conditions
704
Analysis of the decision-making process for the adoption of Enterprise Resource Planning systems in Sri Lankan business environment
705
Analysis of the decoding process of T-codes
706
Analysis of the Decoding-Complexity of Compressed Image-Based Scene Representations
707
Analysis of the decomposition of methylene blue dye under the action of a pulsed DBD plasma jet
708
Analysis of the decorrelation effect under spatial smoothing techniques
709
Analysis of the Decoupled Access for Downlink and Uplink in Wireless Heterogeneous Networks
710
Analysis of the decrease in attenuation achieved by properly bending plastic optical fibers
711
Analysis of the decrease in attenuation achieved by properly bending plastic optical fibres
712
Analysis of the Dedicated Communication Line in a Mine Tunnel for a Shunt-Loaded Trolley Wire
713
Analysis of the defect activation in Cz-silicon by temperature-dependent bias-induced degradation of solar cells
714
Analysis of the defects induced by boron implantation in silicon after sequential annealing processes
715
Analysis of the deficient length prediction error method in a hearing aid´s feedback canceller
716
Analysis of the deflection system for a magnetic-field-immersed magnicon amplifier
717
Analysis of the deforming regime generated by different light sources, using reconfigurable system - CompactRIO
718
Analysis of the degradation and breakdown of thin SiO
2
films under static and dynamic tests using a two-step stress procedure
719
Analysis of the Degradation in Source Location Accuracy in the Presence of Sensor Location Error
720
Analysis of the degradation of a spaceflight tape recorder
721
Analysis of the degradation of high concentrator III-V solar cells
722
Analysis of the degradation of the static characteristics of aged discrete and monolitic components
723
Analysis of the degradation tendency of industrial manufacturing devices and development of a general-purpose remote monitoring system
724
Analysis of the degree distribution of a multi-community consumer-producer network with both growing and rewiring dynamics
725
Analysis of the Degree of Difficulty in Solving Vehicle Routing Problem with Time Windows
726
Analysis of the degree of importance of information using newspapers and questionnaires
727
Analysis of the degree of polarization of optical waves in a single-mode optical fiber with random coupling
728
Analysis of the degree of reliability of a redundant modular inverter structure
729
Analysis of the Degree of Urban Impervious Surface based on Object-Oriented Method
730
Analysis of the delay and jitter of voice traffic over the Internet
731
Analysis of the delay in packet speech multiplexing
732
Analysis of the Delays of Switched Industrial Ethernet Based on Priority Queue Model
733
Analysis of the Delay-time for Wideband SI-GaAs Photoconductive Antenna Triggered by Laser Pulse
734
Analysis of the Delta-Grounded Transformer [includes discussion]
735
Analysis of the demand for an electronic advise of traffic code violations
736
Analysis of the Demand Structure Based on Entropy Theory
737
Analysis of the demodulation techniques for OFDM signals under correlated Rayleigh fading
738
Analysis of the dendrite on printed wiring board by soft X-ray microscope and THz imaging: Structure of the dendrite in Ion-migration
739
Analysis of the Density Effects on the Source-sink Dynamics in Sugar-Beet Growth
740
Analysis of the departure process of an ATM service multiplexer in the North Carolina Information Highway
741
Analysis of the dependence of PET/CT quantification on iterative reconstruction parameters
742
Analysis of the dependence of the subthreshold swing and the threshold voltage on the substrate voltage of thin-film SOI MOSFETs: extraction of the interface state densities
743
Analysis of the depletion layer of exponentially graded p-n junctions with nonuniformly doped substrates
744
Analysis of the depletion-mode MOSFET including diffusion and drift currents
745
Analysis of the deployment of transportable base stations in personal communication services networks with expanded user location features
746
Analysis of the depolarized current in polyvinylidene flouride
747
Analysis of the design of the optimum pilot pattern using different bi-dimensional interpolation filters
748
Analysis of the design of the thinned antenna array pattern using the desired function
749
Analysis of the design space of single-stage and two-stage LC output filters of switched-mode AC power sources
750
Analysis of the design trajectory characteristics for the minimal-time system design algorithm
751
Analysis of the design trend of rural household refrigerators
752
Analysis of the Desired-Response Influence on the Convergence of Gradient-Based Adaptive Algorithms
753
Analysis of the detection modes of a human presence detection millimeter-wave radiometer
754
Analysis of the Detection of Organophosphate Pesticides in Aqueous Solutions Using Hydrogen-Bond Acidic Coating on SH-SAW Devices
755
Analysis of the detection of organophosphate pesticides in aqueous solutions using polymer-coated SH-SAW sensor arrays
756
Analysis Of The Detection Perforjviance Digital Hard Limited Phased Encoded CFAR
757
Analysis of the detection performance of Coherent Scatterers in SAR images
758
Analysis of the determination of the dimensional offset of conducting layers and MOS transistors
759
Analysis of the determination of the dimensional offset of conducting layers and MOS transistors
760
Analysis of the determinism of time-series extracted from social and biological systems
761
Analysis of the Deuteron Distribution Emerging from the FMIT RFQ
762
Analysis of the development and economical benefit of biomass energy industry in China
763
Analysis of the development and implementation of VANET network intervehiculary communication systems
764
Analysis of the Development Feature and Competitiveness in Anhui Industrial Cluster
765
Analysis of the Development of China´s Trade in Services Based on International Financial Crisis
766
Analysis of the Development of International Service Outsourcing in China
767
Analysis of the Development of Kutztown Community Network
768
Analysis of the development of low-carbon economy in Tibet
769
Analysis of the development of real estate e-commerce
770
Analysis of the Development of Rural Microcredit from the Rural Credit Cooperatives - Taking Hubei Province Yi Chang City Rural Credit Cooperative as Example
771
Analysis of the development of Ukrainian repositories
772
Analysis of the development strategy of Chinese fruits and vegetables based on neural network and grey prediction
773
Analysis of the Development Strategy of Technological Small and Medium-Sized Enterprises under Tail Financial Crisis Background
774
Analysis of the devolo´s 500 kHz G3-PLC access technology based on smart grid field trials
775
Analysis of the DFIG during voltage dips
776
Analysis of the die test optimization algorithm for negative binomial yield statistics
777
Analysis of the dielectric and breakdown characteristics of Nano MMT modified insulation pressboard
778
Analysis of the Dielectric Behavior of Castor Oil Impregnated All-Paper Capacitors
779
Analysis of the dielectric behavior of distribution insulators under non-standard lightning impulse voltages
780
Analysis of the Dielectric Breakdown Characteristics for a 252-kV Gas Circuit Breaker
781
Analysis of the dielectric disc antennas above a grounded dielectric substrate
782
Analysis of the dielectric functions of CdS and CdTe for grain size, stress, and temperature: Potentialities for on-line monitoring
783
Analysis of the Dielectric Properties of Trunk Wood in Dominant Conifer Species from New England and Siberia
784
Analysis of the dielectric slab waveguide
785
Analysis of the dielectric strength of an SF
6
circuit breaker
786
Analysis of the difference-frequency wave generated by the interaction of two axisymmetric and co-focused ultrasound beams
787
Analysis of the differences between human vision and 3d capture
788
Analysis of the differences in energy simulation results between Building Information Modeling (BIM)-based simulation method and the detailed simulation method
789
Analysis of the different contributions to the response of SAW gas sensors
790
Analysis of the different wireless transmission technologies in Distributed Measurement Systems
791
Analysis of the differential amplifier with an active load
792
Analysis of the differential phase shift in the circular ferrite-dielectric waveguide with azimuthal magnetization
793
Analysis of the difficulties and essentials in low strain integrity testing on pile foundation in solution cavity area
794
Analysis of the diffracting centers of a complex 3-dimensional structure
795
Analysis of the diffuse attenuation coefficients for radiance and the implications for retrieval of the spectral signature of submerged tropical corals
796
Analysis of the diffuse-to-hot spot attachment mode transition for high pressure arcs on thermionic cathodes
797
Analysis of the Digital Home Wireless Meter Reading Interface Execution Process
798
Analysis of the digital implementation of a chaotic deterministic-stochastic attractor
799
Analysis of the digital MTI filter with random PRI
800
Analysis of the dimensional dependence and internal field structure of ferrite head pole tip at saturation
801
Analysis of the dipole circular array in interferometric direction-finding system
802
Analysis of the direct Fourier method for computer tomography
803
Analysis of the Direct Modulation Response of Nanowire Lasers
804
Analysis of the direct position determination approach in the presence of model errors
805
Analysis of the direct radiation of EC motors up to 10 MHz
806
Analysis of the direction of the airflow generated by moving vehicles in a long tunnel
807
Analysis of the directional characteristic of the parallel coupled printed dipole
808
Analysis of the direction-based location update schemes for wireless cellular networks
809
Analysis of the directions in which forces are applied on the hand during manual manipulation and exploration
810
Analysis of the Directivity Gain of a Synthetic Aperture in Active and Passive Modes
811
Analysis of the directivity of pattern-steerable short-wave four-limb delta antenna
812
Analysis of the Discharge Characteristics in an AC Plasma Display Panel Using Energy Fluid Model
813
Analysis of the discharge development of a positive rod-plane gap in air
814
Analysis of the discharge modes of atmosphere dielectric barrier discharges of helium, argon and nitrogen
815
Analysis of the discharge of the ATLAS barrel toroid and end cap toroids with different configurations of the protection circuit
816
Analysis of the discontinuities in prioritized tasks-space control under discreet task scheduling operations
817
Analysis of the Discontinuity Between Ridged and Rectangular Waveguide by an Efficient Mode-Matching Technique
818
Analysis of the Discontinuous PWM Strategies Applied to the VSI
819
Analysis of the discrete-time periodic Riccati equation by a Kleinman procedure
820
Analysis of the discrete-time SMP/D/1/s finite buffer queue with applications in ATM
821
Analysis of the Discretization Error at Material Interfaces in Staggered Grids
822
Analysis of the Disintegration of Charged Droplets Employing
Boundary Element Method and Particle Method
823
Analysis of the disk-loaded spherical annular-ring microstrip antenna
824
Analysis of the Dispersion Characteristic of Slot Line with Thick Metal Coating
825
Analysis of the dispersion characteristics and attenuation of a semiconductor cylindrical waveguide with plasma regions
826
Analysis of the dispersion characteristics of microstrip lines on anisotropic substrate with spectral-domain method
827
Analysis of the dispersion characteristics of shielded microstrip line
828
Analysis of the dispersion properties of holey optical fibers using normalized dispersion
829
Analysis of the dispersion properties of the multiresolution time-domain (MRTD) scheme
830
Analysis of the dispersion relation for Lithium niobate inversion layer
831
Analysis of the displacement of complaint double parallel four-bar mechanism
832
Analysis of the Disruption of Evaporating Charged Droplets
833
Analysis of the disruptive effect model for the prediction of the breakdown characteristics of distribution insulators under non-standard lightning impulses
834
Analysis of the Distance Between Two Classes for Tuning SVM Hyperparameters
835
Analysis of the distinctiveness of the planning of Harbin Middle East Railway residential area
836
Analysis of the distorted Born approximation for subsurface reconstruction: truncation and uncertainties effects
837
Analysis of the distortion noise due to optical fiber reflections in subcarrier-multiplexed (SCM) lightwave systems
838
Analysis of the distributed generation for ancillary services support in distribution networks
839
Analysis of the Distributed Generation System and the Influence on Power Loss
840
Analysis of the distributed residential energy storage impact on the grid operation
841
Analysis of the Distribution Feature of Wuliangsuhai Lake Nutritious Elements: Nitrogen and Phosphorus and Its Geochemistry Environment
842
Analysis of the distribution of specific absorption rate induced by five plane waves with a fast and new method in Visible Human
843
Analysis of the Distribution of the Number of Correctable Erasures for Turbo Codes with DRP Interleavers
844
Analysis of the distribution of the number of erasures correctable by a binary linear code and the link to low-weight codewords
845
Analysis of the disturbance rejection ability of a passive dynamic walker with hip spring
846
Analysis of the diurnal variation of arterial pressure waves
847
Analysis of the Divergence Properties for the Three-Dimensional Leapfrog ADI-FDTD Method
848
Analysis of the diversity potential of an intelligent quadrifilar helix antenna
849
Analysis of the divert ability of atmospheric interceptors controlled by lateral jet thrusters
850
Analysis of the Doherty technique and application to a 900MHz power amplifier
851
Analysis of the domain of applicability of an algorithm for a resources system selection problem for Distributed/Agile/Virtual Enterprises integration
852
Analysis of the Domain Wall Motion in the Ion Irradiated Amorphous Ribbon
853
Analysis of the dominant effect of Tianjin energy intensity changes based on index decomposition model
854
Analysis of the dominant propagation mechanisms for radio coverage and interference prediction in urban scenarios at 2.4, 5.8 & 28.0 GHz
855
Analysis of the Double Laser Emission Occurring in 1.55-μm InAs–InP (113)B Quantum-Dot Lasers
856
Analysis of the Double Output Induction Generator Using Direct Three-phase Model Part I - Commutation Angle Analysis
857
Analysis of the Double Output Induction Generator Using Direct Three-phase Model Part II - Harmonic Analysis
858
Analysis of the Double Output Induction Generator Using Direct Three-Phase Model. Part I???Commutation Angle Analysis
859
Analysis of the Double Output Induction Generator Using Direct Three-Phase Model. Part II???Harmonic Analysis
860
Analysis of the Double-conversion Scheme Based on Single Local Oscillator
861
Analysis of the doubled-slot end-wall waveguide to CPW transition
862
Analysis of the Double-Layer Printed Spiral Coil for Wireless Power Transfer
863
Analysis of the double-machine coupling model of semi-synchronous starting
864
Analysis of the doubler of electricity considering a resistive load
865
Analysis of the Double-Tiered Three-Battery Switched Capacitor Battery Balancing System
866
Analysis of the doubly resonant optical parametric oscillator without power-dependent reflections
867
Analysis of the drag-cup A-C tachometer
868
Analysis of The Drag-Cup A-C Tachometer by Means of 2-Phase Symmetrical Components
869
Analysis of the drain breakdown mechanism in ultra-thin-film SOI MOSFETs
870
Analysis of the drain thermal noise for deep submicron MOSFETs
871
Analysis of the dRET input parameters under varying wind conditions at 20 GHz
872
Analysis of the drift velocity of the Silicon Drift Detector for ALICE experiment
873
Analysis of the drive for horizontal motion of a crane using a laboratory model
874
Analysis of the Driving Characteristic of CNT Triode with High Frequency
875
Analysis of the Driving Force of a Levitated Spherical Superconducting Rotor
876
Analysis of the Dry-type Transformer Temperature Field Based on Fluid-solid Coupling
877
Analysis of the dual heater isothermal AC/DC converter
878
Analysis of the dual input hybrid buck DC-DC converter in boundary conduction mode
879
Analysis of the Dual-Excited Synchronous Machine
880
Analysis of the dual-fed distributed power amplifier
881
Analysis of the duality of three phase PWM converters with DC voltage link and DC current link
882
Analysis of the dual-polarised patch antenna and two-element array by FDTD
883
Analysis of the duopoly game based on endogenous timing
884
Analysis of the duration of frequency converter´s repetition period
885
Analysis of the DVB-T Signal Variation
for Indoor Portable Reception
886
Analysis of the dynamic and steady-state performance of Cockcroft-Walton cascade rectifiers
887
Analysis of the dynamic and steady-state performance of Cockcroft-Walton cascade rectifiers
888
Analysis of the dynamic and steady-state performance of dual output LLCC-type parallel resonant DC/DC converters
889
Analysis of the dynamic behavior and LVRT capability of a DFIG using SDBR during grid disturbances
890
Analysis of the dynamic behavior and short-pulse modulation scheme for laterally coupled diode lasers
891
Analysis of the dynamic behavior of a charge-transfer amplifier
892
Analysis of the dynamic behavior of a DFIG during grid disturbances using active crowbar protection
893
Analysis of the dynamic behavior of a doped silicon U-shaped electrothermal actuator
894
Analysis of the Dynamic Behavior of a Linear Induction Type Catapult
895
Analysis of the Dynamic Behavior of a Self-Commutated BTB System During Line Faults
896
Analysis of the dynamic behavior of induction motors by changing the parameters of feedback linearization strategy
897
Analysis of the dynamic behaviour of a single Hodgkin-Huxley neuron model
898
Analysis of the dynamic behaviour of malignant tumours using mathematical models and ultrasound parameters - a survey
899
Analysis of the dynamic characteristics in the overcurrent limited mode of the DC-DC converter
900
Analysis of the dynamic characteristics in the overcurrent limited mode of the DC-DC converter
901
Analysis of the dynamic characteristics of a future “zero-emission” coal-fired power plant with a focus on controller design
902
Analysis of the dynamic characteristics of a power semiconductor module, considering the influence of electromagnetic coupling between wiring
903
Analysis of the dynamic characteristics of firefly algorithm
904
Analysis of the dynamic characters of C-shaped armature in railgun
905
Analysis of the Dynamic Mechanism of Synergic Innovation between Productive Service Industry and Manufacturing Industry
906
Analysis of the Dynamic Motion for Biosignal Measurement in Wearable system
907
Analysis of the Dynamic Operation of Experimental Wind Farms in Mexico
908
Analysis of the dynamic phenomena during lamination of multilayer printed circuit board by the measurement of pressure distribution
909
Analysis of the dynamic phenomena during lamination of multilayer printed circuit board by the measurement of pressure distribution
910
Analysis of the Dynamic Relation between Logistics Development and GDP Growth in China
911
Analysis of the dynamic response of multielement semiconductor lasers
912
Analysis of the dynamic response of the icecap structure under the action of explosion wave
913
Analysis of the Dynamic Responses of SOA Wavelength Converters Using Linear Frequency Resolved Gating Technique
914
Analysis of the dynamic SFDR property of high-accuracy current-steering D/A converters
915
Analysis of the dynamic time error in a chain of cascading telecom boundary clocks
916
Analysis of the dynamic traveling salesman problem with weight changes
917
Analysis of the dynamical behaviour of the EEG rhythms during a test of sustained attention
918
Analysis of the dynamical chaos in a cavity with an array of active devices
919
Analysis of the dynamical performance of industrial facilities with local generation
920
Analysis of the dynamical response of unipolar semiconductor lasers
921
Analysis of the dynamics and nonlinear control of under-actuated brachiation robots
922
Analysis of the dynamics in microactuators using high-speed cine photomicrography
923
Analysis of the dynamics of a biped robot with seven degrees of freedom
924
Analysis of the dynamics of a wind-turbine water-pumping system
925
Analysis of the dynamics of allele distribution for some selected GA-variants
926
Analysis of the dynamics of an underactuated robot: the forced pendubot
927
Analysis of the dynamics of CDMA reverse link power control
928
Analysis of the dynamics of frequency upconversion in Er(su3+}/Yb(su3+} co-doped KY(WO
4
)
2
crystal
929
Analysis of the dynamics of frequency upconversion in Er
3+
/Yb
3+
co-doped KY(WO
4
)
2
crystal
930
Analysis of the dynamics of RR interval series for the detection of atrial fibrillation episodes
931
Analysis of the dynamics of the adoption of technologies in the value chain
932
Analysis of the dynamics shaping microstructured optical fiber during drawing process
933
Analysis of the Early Flow Discard (EFD) discipline in 802.11 wireless LANs
934
Analysis of the early voltage in bipolar transistors
935
Analysis of the Early-Failure Rate Prediction of Time-Dependent-Dielectric Breakdown in Thin Oxides
936
Analysis of the earth potential problems of the electrified railway
937
Analysis of the Earth´s surface roughness by using indicatrices
938
Analysis of the eccentricity in a low-speed slotless permanent-magnet wind generator
939
Analysis of the ECG Signal Using SVD-Based Parametric Modelling Technique
940
Analysis of the Echo for Identifying the Temporal Structure of the Fish by Using the Broadband Sonar Signal of Dolphin
941
Analysis of the ecological tourism development model based on SWOT
942
Analysis of the E-Commerce Application Status in China´s Household Appliance Industry
943
Analysis of the economic benefits to new energy-saving distribution transformer
944
Analysis of the Economic Development Capacity of Jining City
945
Analysis of the economic growth based on the Solow model: Search of the neoclassical growth model with multiple equilibrium states
946
Analysis of the EDCA access mechanism for an IEEE 802.11e-compatible wireless LAN
947
Analysis of the eddy current loss in the secondary of tubular flux-switching permanent magnet linear motor (TFSPMLM)
948
Analysis of the Eddy Current Relaxation Time Effects in the FAIR SIS 100 Main Magnets
949
Analysis of the eddy-current field of a rotary bias field device for magneto-optic recording
950
Analysis of the eddy-current induced artifacts and the temporal compensation in nuclear magnetic resonance imaging
951
Analysis of the edge-effects in frequency-domain TDOA estimation
952
Analysis of the EDIPO Temperature Margin
During Current Ramp-Up
953
Analysis of the EEG during the sleeping by the rhythmic component extraction
954
Analysis of the effect of a dielectric cover on the radiation pattern of microstrip antennas
955
Analysis of the effect of a saturable-core HTS fault current limiter on the circuit breaker transient recovery voltage
956
Analysis of the Effect of AC Noise on DC Bias of VGA for UHF RFID using Chip-package Co-modeling and Simulation
957
Analysis of the effect of asymmetrical phase parameters in a 3-phase permanent magnet synchronous motor
958
Analysis of the effect of atomizer spray refrigeration in high-temperatured caving face by stochastic model
959
Analysis of the effect of backlash and joint acceleration measurement noise in the adaptive control of electro-mechanical systems
960
Analysis of the effect of baseline redundancy on synthetic aperture interferometric radiometers performance
961
Analysis of the Effect of Bay-bus-stop on Traffic Flow in One-direction Two Road by the Continuum Model
962
Analysis of the effect of beacon order and Superframe Order value to the performance of multihop wireless networks on IEEE 802.15.4 protocol
963
Analysis of the effect of boron doping on GeTe Phase Change Memories
964
Analysis of the effect of both shot and thermal noises on the performance of dynamic OC
2
DMA correlation receivers using fiber Bragg grating
965
Analysis of the effect of bypass on the performance of heat sinks using flow network modeling (FNM)
966
Analysis of the effect of calcium stores on the bursting of a pancreatic β-cells cluster
967
Analysis of the effect of calibration error on light field super-resolution rendering
968
Analysis of the effect of carrier frequency offsets on the performance of SC-FDMA-IDMA systems
969
Analysis of the effect of cell parameters on the maximum RRAM array size considering both read and write
970
Analysis of the Effect of Channel Sub-rating in Unidirectional Call Overflow Scheme for Call Admission in Hierarchical Cellular Networks
971
Analysis of the effect of charge imbalance on the static and dynamic characteristics of the super junction MOSFET
972
Analysis of the effect of charge storage on the frequency response of SCR´s
973
Analysis of the effect of chirp parameters on image quality of synthetic aperture RADAR
974
Analysis of the Effect of Core Affinity on High-Throughput Flows
975
Analysis of the effect of crown structure changes on backscattering coefficient using modeling and SAR data
976
Analysis of the Effect of DAC Resolution on AC Voltage Generated by Digitally Synthesized Source
977
Analysis of the effect of DAC resolution on RMS value of the signal generated by the digital source of low-frequency standard AC voltage
978
Analysis of the effect of Daqu´s physical and chemical parameters on liquor production yield using rough sets and fuzzy cluster
979
Analysis of the Effect of Daqu´s Physical and Chemical Parameters on Liquor Quality Using Rough Sets
980
Analysis of the effect of different attention types on evoked potentials by P100 wave
981
Analysis of the Effect of Different Features´ Performance on Hidden Markov Modeling Based Online and Offline Signature Verification Systems
982
Analysis of the Effect of Digital Power Ground Noise on Active Balun in UHF RFID SiP
983
Analysis of the effect of discerption of surface PM pole on cogging torque of PM motor
984
Analysis of the effect of distance on the TRV waveform for a short-line fault
985
Analysis of the Effect of Distributed Generation on Power Grid
986
Analysis of the effect of disturbance for remote sensing platform´s dynamical characteristic
987
Analysis of the effect of EBG on the mutual coupling for a two-PIFA assembly
988
Analysis of the effect of electric field due to High Voltage Transmission lines on humans
989
Analysis of the Effect of ESD on the Operation of MEMS
990
Analysis of the Effect of ESD on the Operation of MEMs
991
Analysis of the effect of fatigue on walking gait stability
992
Analysis of the effect of feeder cable on the stator winding voltage stress in a PWM induction motor drive
993
Analysis of the effect of ferrite tile gap on EMC chamber having ferrite absorber walls
994
Analysis of the effect of finite d.c. blocking capacitance and finite d.c. feed inductance on the performance of inverse class-E amplifiers
995
Analysis of the effect of finite gap width on the admittance of solid circular dipole
996
Analysis of the effect of gamma-ray irradiation and low-temperature characteristics of sol-gel derived ZnO thin-film transistors
997
Analysis of the effect of haze on free space optical communication in the Malaysian environment
998
Analysis of the effect of horseback riding exercise equipment on the human body
999
Analysis of the effect of humidity on corona radio interference
1000
Analysis of the effect of humidity on d.c. corona power losses
