<< مقالات لاتين فني مهندسي >>
<< بر اساس عنوان >>
1
Control design for flexible hierarchical formation of multiple robots
2
Control design for flexible spacecraft using the integrated analysis capability
3
Control design for force balance sensors
4
Control Design for Fuzzy Systems Based on Relaxed Nonquadratic Stability and H
∞
Performance Conditions
5
Control design for harmonic disturbance rejection for robot manipulators with bounded inputs
6
Control design for impedance model with feedback delay
7
Control design for integrated switch-mode power supplies: a new challenge?
8
Control design for integrator hybrid systems
9
Control design for interconnected power systems with OLTCs via robust decentralized control
10
Control Design for Interval Type-2 Fuzzy Systems Under Imperfect Premise Matching
11
Control design for ionic polymer-metal composite based actuators
12
Control design for linear systems with saturating actuators and ℒ
2
-bounded disturbances
13
Control Design for Linear Tracking Combined with Perfect Following
14
Control Design for Longitudinal Flight Dynamics
15
Control design for loop transfer recovery
16
Control design for LPV systems with input saturation and state constraints: An application to a semi-active suspension
17
Control design for machine tools using Domiciano, an IDE based on software components
18
Control design for mine ventilation network systems
19
Control Design for Multiphase Synchronous Buck Converters Based on Exact Constant Resistive Output Impedance
20
Control design for nodes in decentralized traffic networks with delayed traffic information
21
Control design for nonlinear differential inclusions based on CLFs
22
Control design for nonlinear systems with non-analytical subsystems
23
Control design for nonlinear systems: trading robustness and performance with the model predictive control approach
24
Control design for non-minimum phase-shift systems
25
Control design for open-loop unstable quadratic systems
26
Control design for over-actuated systems based on reliability indicators
27
Control design for parallel-connected DC-AC inverters using sliding mode control
28
Control design for PMM starter-generator operated in flux-weakening mode
29
Control design for PMM-based starter generator system for More Electric Aircraft
30
Control Design for Quantized Linear Systems With Saturations
31
Control Design for Quasi-Linear Hyperbolic Systems With an Application to the Heavy Rope
32
Control design for reconfigurability
33
Control design for residual gas fraction in engine based on stochastic logical dynamics
34
Control design for robust eigenstructure assignment in linear uncertain systems
35
Control design for robust eigenstructure assignment in linear uncertain systems
36
Control design for robust performance of a direct-drive robot
37
Control design for self servo track writer using estimation of the head position
38
Control design for self-servo track writing using a state-space disturbance observer
39
Control Design for Self-Servo Track Writing Using a State-Space Disturbance Observer
40
Control design for stochastic continuous T-S model based systems
41
Control design for SVC´s on the Mead-Adelanto and Mead-Phoenix transmission project
42
Control design for switched systems using passivity indices
43
Control design for systems in chained form with bounded inputs
44
Control design for the PVTOL aircraft with arbitrary bounds on the acceleration
45
Control design for the rotation of crane loads for boom cranes
46
Control design for topology-independent stability of interconnected systems
47
Control Design for Trajectory Tracking With Untimed Petri Nets
48
Control design for transient power and spectral control in optical communication networks
49
Control design for transparent teleoperators with model parameter variation
50
Control design for unmanned sea surface vehicles: hardware-in-the-loop simulator and experimental results
51
Control Design for Vehicle´s Lateral Dynamics
52
Control Design Guidelines for Single-Phase Grid-Connected Photovoltaic Inverters With Damped Resonant Harmonic Compensators
53
Control design implementation for Sawyer motors used in manufacturing systems
54
Control design in a distributed WNCS using energy optimal scheduled medium access
55
Control Design in Mechatronic Systems Using Dynamic Emulation of Mechanical Loads
56
Control design in Model-Based Development and new SICE benchmark control design problem
57
Control design in the harmonic domain for microwave and RF circuits
58
Control design issues for a microinvasive neurosurgery teleoperator system
59
Control Design -Let´s Get Physical
60
Control design method for time-delay linear differential inclusion systems
61
Control design methodology for periodic systems with variable sampling period application to resonant converters
62
Control design methodology using EALQR
63
Control design of a bearingless flux-switching slice drive
64
Control design of a biped humanoid robot capable of facial expression
65
Control design of a cascade boost converter based on the averaged model
66
Control design of a class of linear systems based on combined nonsmooth switching surfaces
67
Control design of a modular current source power conditioning system for high temperature SMES
68
Control design of a multi-module bidirectional converter for battery charging/discharging applications
69
Control design of a STATCOM with Energy Storage System for stability and power quality improvements
70
Control Design of a Steer-by-Wire System with High Performance PM Motor Drives
71
Control Design of a Three-phase Matrix Converter Mobile AC Power Supply using Genetic Algorithms
72
Control Design of a Three-Phase Matrix-Converter-Based AC–AC Mobile Utility Power Supply
73
Control design of active dynamic vibration absorber based on homogeneous control Lyapunov functions
74
Control Design of an Active and Reactive Power HVDC Modulation System with Kalman Filtering
75
Control Design of an Active and Reactive Power HVDC Modulation System with Kaman Filtering
76
Control design of an advanced high-speed FESS for pulsed power applications
77
Control design of an automated highway system
78
Control Design of an Induction Machine Based Integrated Starter Alternator for 42V PowerNet
79
Control design of anti-roll bar actuator based on constrained LQ method
80
Control design of client using mixed sensitivity problem for multilateral teleoperation system
81
Control design of concentric self-servo track writing systems for hard disk drives
82
Control design of coordinated droop control for hybrid AC/DC microgrid considering distributed generation characteristics
83
Control design of driver support system using multiple driver models
84
Control design of DSP based a bi-directional converter for electric vehicles applications
85
Control Design of Electrically Assisted Boosting Systems for Diesel Powertrain Applications
86
Control design of electrically-assisted steering systems for bicycles with child restraint seats
87
Control Design of Ethanol Steam Reforming in Thermal Plasma Reformer
88
Control design of grid-connected three-phase inverters for voltage unbalance correction
89
Control Design of Hard Disk Drive Concentric Self-Servo Track Writing via
and
90
Control design of hard disk drive self-servo track writing via H
2
and H
∞
control synthesis
91
Control design of linear systems with variable time-delay based on hysteresis-based switching algorithms and semi-discretization
92
Control design of matrix converter system
93
Control design of nonlinear mechanical systems with friction
94
Control design of nonlinear systems over a communication network
95
Control design of passive magnetic levitation tray
96
Control design of photovoltaic BPSX-60 using fuzzy logic controller for low voltage grid
97
Control design of robot for compliant manipulation on dynamic environments
98
Control design of robot for compliant manipulation on dynamic environments
99
Control design of Santo Tome back-to-back HVDC link
100
Control design of shape memory alloy based multi-arm continuum robot inspired by octopus
101
Control design of STATCOM with superconductive magnetic energy storage
102
Control design of steering assistance system for driver characteristics
103
Control design of switched LPV systems using multiple parameter-dependent Lyapunov functions
104
Control design of synchronizing chaos in 2-link pneumatic manipulator
105
Control design of three-level voltage source inverter for SMES power conditioning system
106
Control Design of Uncertain Quantum Systems With Fuzzy Estimators
107
Control Design of Variable-Geometry Suspension Considering the Construction System
108
Control design optimization for an asymmetric half-bridge converter
109
Control design to achieve dynamic walking on a bipedal robot with compliance
110
Control design under relay measurements
111
Control design under relay measurements
112
Control design using Jordan controllable canonical form
113
Control design using polynomial matrix interpolation
114
Control design via polynomial toolbox for Matlab version 2.0
115
Control design via TAM and
H
∞
approaches: a flexible beam case study
116
Control design with limited model information
117
Control design with optimal rejection of disturbances applied to an active suspension system
118
Control design with output constraints: Multi-regulator sliding mode approach with override logic
119
Control design with transfer functions associated to higher order Volterra kernels
120
Control Designs for a Class of Hamiltonian Systems with Applications to Ordinary Systems
121
Control designs for an adaptive optics system
122
Control designs for low-loss active magnetic bearings
123
Control development for a hybrid-electric sport-utility vehicle: strategy, implementation and field test results
124
Control development for an 18 MW pulsed power converter using a real-time simulation platform
125
Control development for mechatronic systems with a fully reconfigurable pipeline architecture
126
Control developments for wheelchairs in slope environments
127
Control device for fluorite concoction decomposition stove heat condition
128
Control device of ultrasonic vibration amplitude
129
Control devices based on a periodic sequence of the metal-dielectric scatterers
130
Control discrete systems and their applications to beam dynamics optimization
131
Control Double Inverted Pendulum by Reinforcement Learning with Double CMAC Network
132
Control during feedback failure: Characteristics of the optimal solution
133
Control Dynamics of a doubly fed induction generator under sub- and super-synchronous modes of operation
134
Control dynamics of speed drive systems using sliding mode controllers with integral compensation
135
Control dynamics of speed drive systems using sliding mode controllers with integral compensation
136
Control Education [About This Issue]
137
Control education crossing department boundaries
138
Control Education in the Era of Microprocessors
139
Control Education Technical Committee [Technical Activities]
140
Control education via autonomous robotics
141
Control Education: A World Showcase
142
Control education: time for radical change?
143
Control effectiveness estimation using an adaptive Kalman estimator
144
Control effectiveness investigation of a ducted-fan aerial vehicle using model predictive controller
145
Control Effort Considerations in the Stabilization of Uncertain Dynamical Systems
146
Control effort evaluation for low-altitude formation flying
147
Control effort reduction analysis of Zero-Vibration model reference control for controlling a time-varying plant
148
Control effort reduction in output-feedback stabilization for a class of stochastic nonlinear systems
149
Control effort reduction in quantitative feedback theory for multivariable systems
150
Control Effort Reduction in Tracking Feedback Laws
151
Control electronics for a neuro-electronic interface implemented in a gate array
152
Control electronics for the novacor totally implantable left ventricular assist system
153
Control electronics integration toward endoscopic capsule robot performing legged locomotion and illumination
154
Control electronics integration toward endoscopic capsule robot performing legged locomotion and illumination
155
Control Electronics of the PEP RF System
156
Control Electronics of TMK2200 Type Tramcar for the City of Zagreb
157
Control Electronics On Rail Vehicles
158
Control Electronics System for the University of Wisconsin OAO Experiment
159
Control elements analysis & countermeasures in construction project management
160
Control elements for visual and audio man/machine interface
161
Control elements in production printing and publishing systems: DocuColor iGen3
162
Control elimination of time optimal bang-bang control with a class of input constraints
163
Control engineering
164
Control Engineering
165
Control engineering
166
Control engineering and economic modelling
167
Control engineering and economic modelling: a collaboration aimed at improving control of the national economy
168
Control Engineering and Energy Conservation: An Example Project of How Both Disciplines can Coexist
169
Control engineering and related systems approaches for improving behavioral health
170
Control engineering and the analog computer: academic and industrial machines in Britain
171
Control Engineering and the Birth of Aviation [From the Editor]
172
Control Engineering and the Professional Societies: The Early Days in International Context
173
Control engineering and therapeutic drug delivery
174
Control engineering applications of V. I. Zubov´s construction procedure for Lyapunov functions
175
Control engineering applications of V. I. Zubov´s construction procedure for Lyapunov functions
176
Control engineering approach to magnetohydrodynamic stability
177
Control engineering at UT-Permian Basin: An alternative in engineering education
178
Control engineering challenges for railway trains of the future
179
Control engineering education at Monterrey Tech
180
Control engineering education critical success factors modeling via Fuzzy Cognitive Maps
181
Control engineering education in India
182
Control engineering education through AUN/Seed-Net
183
Control engineering environments in DB-Prolog
184
Control engineering for color printing
185
Control engineering for computing systems - industry experience and research challenges
186
Control engineering in higher education
187
Control engineering in Japan: Past and present
188
Control engineering in the former USSR. Some ideological aspects of the early years
189
Control Engineering Solutions: A Practical Approach [Book Reviews]
190
Control engineering, an inboductory course [Book Review]
191
Control Engineering: A Modern Approach [BOOKSHELF]
192
Control Engineering: New Trends with OO Modelling Approach
193
Control Engineers Workbench, A Methodology for Microcomputer Implementation of Controls
194
Control engineers workbench--A methodology for microcomputer implementation of controls
195
Control equipment for direct-current trains
196
Control equipment for the British grid
197
Control equipment on the new london tube trains
198
Control Error-based Scheduling of RT Control Tasks
199
Control Estimation Error of Sampling Method for Passive Measurement
200
Control Experiment of a Wheel-Driven Mobile Inverted Pendulum Using Neural Network
201
Control experiment of a wheeled drive mobile pendulum using neural network
202
Control Experiment of the Inverted Pendulum Using Adaptive Neural-Fuzzy Controller
203
Control Experiment on Pickup Head Flying above Rotating Disk
204
Control experimentation for undergraduate students
205
Control experiments and what I learned from them: a personal journey
206
Control experiments in planar manipulation and grasping
207
Control Experiments on a Shoe String [Focus on Education]
208
Control experiments on a two-link robot with a flexible forearm
209
Control experiments on an underactuated robot with application to legged locomotion
210
Control factor for propagation velocity of magnetoelastic oscillations in amorphous metall alloys
211
Control factors of spectral reflectance in tidal flat: a case study in the Gomso Bay, Korea
212
Control Features of a Magnetic-Drum Telephone Office
213
Control features of dual-channel DC-DC converters
214
Control features of the HVDC Gezhouba-Shanghai transmission scheme
215
Control Flow Analysis and Coverage Driven Testing for Web Services
216
Control flow analysis in presence of exceptions for Java
217
Control flow analysis of distributed computing system software using structured Petri net model
218
Control flow behavior of cloud workloads
219
Control Flow Checking Algorithm using Soft-basedIntra-/Inter-block Assigned-Signature
220
Control flow checking in pipelined RISC microprocessors: the Motorola MC88100 case study
221
Control flow driven splitting of loop nests at the source code level
222
Control flow extensions to the dataflow language SISAL
223
Control flow graph reconstruction for assembly language programs with delayed instructions
224
Control flow graphs as a representation language
225
Control flow in a dataflow language
226
Control Flow Intervention for Semantic Failure Handling during Composite Serice Execution
227
Control flow management in the hospitality industry
228
Control flow modeling in statistical simulation for accurate and efficient processor design studies
229
Control flow normalization for COBOL/CICS legacy systems
230
Control flow obfuscation with information flow tracking
231
Control flow optimization for fast system simulation and storage minimization [real-time multidimensional signal processing]
232
Control Flow Optimization Via Dynamic Reconvergence Prediction
233
Control flow prediction for dynamic ILP processors
234
Control flow prediction schemes for wide-issue superscalar processors
235
Control flow prediction with tree-like subgraphs for superscalar processors
236
Control flow prediction with unbalanced tree-like subgraphs
237
Control Flow Requirements for Automated Service Composition
238
Control flow reversal for adjoint code generation
239
Control flow speculation in multiscalar processors
240
Control Flow Support in Metamodel-Based Model Transformation Frameworks
241
Control Flow-Based Malware VariantDetection
242
Control Focused Soft Error Detection for Embedded Applications
243
Control for 3,000-volt multiple unit cars
244
Control for a class of non-linear singularly perturbed systems subject to actuator saturation
245
Control for a class of nonlinear systems with uncertainties based on disturbance and state observer
246
Control for a class of uncertain underactuated nonlinear systems
247
Control for a family of nonlinear and under-actuated systems with DOF-redundancy and geometric constraints
248
Control for a hydraulically actuated flexible-prismatic link robot
249
Control for a Macro-economic Singular Discrete System with Financial Crisis
250
Control for an autonomous bicycle
251
Control for an Innovative Robotics Platform of Rinsing System for Vehicles of Urban Mass Transit
252
Control for asymmetric flatness deviation of cold-rolled strip
253
Control for autonomous VTOL aircraft with restricted inputs
254
Control for balancing line follower robot using discrete cascaded PID algorithm on ADROIT V1 education robot
255
Control for ball and plate system based on RBF-ADRC
256
Control for bounded pseudo ARMAX stochastic systems via linear B-spline approximations
257
Control for canceling periodic disturbances with uncertain frequency
258
Control for competitive and economic industrial process operations
259
Control for continuous-time Markovian Jumps Linear Systems associated with a finite number of jump times
260
Control for Diode-Clamped Three-Level Half Bridge converter
261
Control for discrete-time fuzzy Markov jump systems with mode-dependent antecedent parts
262
Control for FES hand grasp systems using accelerometers and gyroscopes
263
Control for grid connected PMSG Wind turbine with DC link capacitance reduction
264
Control for Grid-Connected and Intentional Islanding Operations of Distributed Power Generation
265
Control for grid-connected and stand-alone operations of three-phase grid-connected inverter
266
Control for grid-connected bi-directional AC-DC converters in parallel operation
267
Control for high heat chips´ cooling based on power consumption and temperature signals
268
Control for high instantaneous torque from induction machines: Methods and limits
269
Control for high momentary torque from vector-controlled induction machines
270
Control for high-rise buildings subjected to wind and seismic disturbances
271
Control for high-speed archimedean spiral nanopositioning
272
Control for high-speed PE arrays
273
Control for induction motor fed by five level inverter with sliding mode observer
274
Control for large scale demand response of thermostatic loads*
275
Control for Markovian jumping discrete-time systems with different forms of uncertainties
276
Control for Maximal Wind Energy Tracing in Brushless Doubly-Fed Wind Power Generation System Based on Double Synchronous Coordinates
277
Control for Maximal Wind Energy Tracing in Matrix Converter AC Excited Brushless Doubly-Fed Wind Power Generation System
278
Control for microgrids with inverter connected renewable energy resources
279
Control for mobile robots in the presence of moving objects
280
Control for motion synchronization of bilateral teleoperation systems with mode-dependent time-varying communication delays
281
Control for Multi-subsystem Synchronization with Invariant Local Natural Dynamics
282
Control for Networked Control Systems Over Communication
283
Control for neural prostheses: neural networks for determining biological synergies
284
Control for nonlinear chaos based on radial basis function neural networks
285
Control for partial state constraining of nonlinear systems in regular form
286
Control for physical human-robot interaction based on online update of dynamics
287
Control for pneumatic actuator systems using feedback linearization with disturbance rejection
288
Control for Polyphase Switched Reluctance Machines to Minimize Torque Ripple and Decrease Ohmic Machine Losses
289
Control for power conditioner based PEM Fuel Cell and back-up power system with Supercapacitor
290
Control for Power Gating of Wires
291
Control for pulverized fuel coal mill
292
Control for quadruped robots in trotting on horizontal and slanted surfaces
293
Control for railways - active suspensions and other opportunities
294
Control for robust standing of a bipedal robot by sole pressure
295
Control for Roll Shape in NC Roll Grinder Based on Neural Network
296
Control for roll stabilizing and energy consumption of Autonomous Underwater Vehicle near water surface
297
Control for Safety Specifications of Systems With Imperfect Information on a Partial Order
298
Control for single-phase power inverter system based on lead signal and dq transform
299
Control for slosh-free motion of an open container
300
Control for stability and positivity: equivalent conditions and computation
301
Control for stability in interconnected power systems
302
Control for Suppression of Channel Power Excursions in ROADM-Based WDM Chain Networks
303
Control for swing-up of an inverted pendulum using qubit neural network
304
Control for Switched Systems using Output Dynamical Compensator
305
Control for synchronizing multi-crane lifts
306
Control for systems in the presence of actuator and sensor hysteresis
307
Control for teams of kinematic unicycle-like and skid-steering mobile robots with restricted inputs: Analysis and applications
308
Control for the currents balancing of a multicell interleaved converter with ICT
309
Control for the lateral vibration of footbridges induced by pedestrians
310
Control for the traveling wave solution to the Degasperis-Procesi equation
311
Control for the traveling wave solution to the Degasperis-Procesi equation
312
Control for throwing manipulation by one joint robot
313
Control for Triple Integrator with Constrained Input
314
Control for unknown linear systems preceded by hysteresis represented by preisach model
315
Control for unknown systems preceded by hysteresis and its application to nanopositioner
316
Control for unstable nonminimum phase uncertain dynamic vehicle
317
Control for Unstable Non-Minimum Phase Uncertain Dynamic Vehicle
318
Control for vehicle handing stability based on ADAMS and Matlab
319
Control for voltage dips Ride-Through of Oscillating Water Column-based wave power generation plant equipped with Doubly-Fed Induction Generator
320
Control formula for nonlinear systems subject to convex input constraints using control Lyapunov functions
321
Control formulation for partial pole placement of multimachine power systems
322
Control formulation of a highly complex wire-driven mechanism in a surgical robot based on an extensive assessment of surgical tool-tip position/orientation using optical tracking system
323
Control frame for synchronous stability of interconnected power systems in deregulated environments
324
Control frame of cognition in cognitive system with Fuzzy-Neural network
325
Control freaks [induction furnace logic controller]
326
Control free intercell diversity using multi-carrier modulation for fiber-optic microcellular radio communication system
327
Control function margin degradation in a bubble memory chip
328
Control function modeling for the cardiovascular system at constant effort using a pole allocation method
329
Control functions and their implementation in mobile communications
330
Control functions for autonomous underwater vehicle on-board command and control systems
331
Control GaAs MMIC Group for Active Phased Array Systems
332
Control gain design for bilateral teleoperation systems using linear matrix inequalities
333
Control Gate Length, Spacing and Stacked Layer Number Design for 3D-Stackable NAND Flash Memory
334
Control gate patterning optimisation for improved yield of 0.18um embedded FLASH technology
335
Control gate-bit line leakage induced cobalt silicide migration in 0.15/spl mu/m embedded flash memory devices
336
Control gear and auxiliary machines for d.c. multiple-unit electric trains
337
Control gear and auxiliary machines for d.c. multiple-unit electric trains
338
Control generation for embedded systems based on composition of modal processes
339
Control generation for QR decomposition based on the polytope model
340
Control groups simplify operation
341
Control Hierarchies in Biological Systems
342
Control Hierarchy Realization and Cleaning Trajectory Evaluation of a Wall Cleaning Robot
343
Control high-order harmonic generation by molecular field-free alignment
344
Control horizon estimation of input constrained MPC based on control saturation
345
Control IC for Switch Mode Power Supplies
346
Control implementation for a balance beam with magnetic bearings
347
Control implementation of a five-leg AC-AC converter to supply a three-phase induction machine
348
Control implementation of a five-leg voltage-source-inverter supplying two three-phase induction machines
349
Control implementation of compliant composite material actuators for wearable robotic exoskeleton
350
Control implementation of the full-scale wind power converter without grid voltage sensors
351
Control Implications in Tracking Moving Objects Using Time-Varying Perspective-Projective Imagery
352
Control implications of musculoskeletal mechanics
353
Control implied input/output buffering of power conservative two port networks
354
Control Improvement in Single-Phase Active Rectifier with Extended Functions
355
Control improvement of induction motor drives
356
Control Improvements for the DIII-D Cryo System
357
Control in a 3D reconstruction system using selective perception
358
Control in a behavioral setting
359
Control in a family of Boolean networks
360
Control in bioprocessing
361
Control in building energy management systems
362
Control in CDT courses
363
Control in Computationally Constrained Environments
364
Control in computer studies
365
Control in computing systems: Part I
366
Control in computing systems: Part II
367
Control in mechatronics and robotics
368
Control in modern printing systems: Modular reconfigurable media paths, color consistency, fuser process, and registration
369
Control in Multi-Motor Electric Vehicle with a FPGA platform
370
Control in o-minimal Hybrid Systems
371
Control in Outsourcing Relationships: Governance in Action
372
Control in printing systems: Modular reconfigurable media paths
373
Control In Project Management
374
Control in refrigeration systems
375
Control in robotics: open problems and future directions
376
Control in the bootstrap phase of a computer vision system
377
Control in the classroom
378
Control in the food processing industries
379
Control in the History of Computing: Making an Ambiguous Concept Useful
380
Control in the metals industry
381
Control in the OPT environment
382
Control in the reliable region of a statistical model with Gaussian process regression
383
Control independence in trace processors
384
Control Independence Using Dual Renaming
385
Control inercial de robot con dispositivos móviles
386
Control inertia and fuzzy brakes
387
Control Information Acquisition of a Magnetic Suspended Hard Disk Drive
388
Control information and analyzing of metering gas system based of orifice plate
389
Control Information Database
390
Control information description model and processing mechanism in the trustworthy and controllable network
391
Control information exchange design for centralized cognitive radio network
392
Control information exchange in cognitive radio ad hoc networks with heterogeneous spectrum
393
Control information exchange through UWB in cognitive radio networks
394
Control information transmission without resource consumption for PAPR reduction of OFDM signal
395
Control input converter for robot´s leg joint with parallel actuation configuration
396
Control input reconstruction using redundancy under torque limit
397
Control Input Saturation Sliding-Mode Control System Design for Spacecraft Based on Neural Network
398
Control input separation methods applied to cavity flow
399
Control input shaping for coordinate measuring machines
400
Control input synthesis for hybrid systems using informed search
401
Control instability in distributed queueing systems
402
Control Instability Index (CII) based approach for evaluating weak grid integration of wind generation clusters
403
Control instrumentation-a survey of current practice and some future trends
404
Control integrated finite state machine design for photovoltaic module integrated converter
405
Control Integrated Studies on High Speed Permanent Magnetic Generators System
406
Control integrated studies on HSPGS
407
Control integration through message-passing in a software development environment
408
Control interaction mitigation for the unified power flow controller
409
Control interactions of UPFC multi-control control functions - analysis
410
Control interface characterization of power electronics building blocks (PEBB) in utility power system applications
411
Control interfaces for teleoperated mobile robots
412
Control interfaces of generation allocation on the large interconneted power system
413
Control interference of electrical machines with double-star winding systems driven by independent current controllers
414
Control interpretations of products in the Hopf algebra
415
Control invariant partition for heterogeneous Multi-Agent dynamical systems
416
Control IP´s Sharing: From Configurable Mechatronic Control to Autosar SW-C Package. A New Model Business Scenario across Automotive OEMs and Component Supplier and the New Roles of SW IP´s Supplier and SW IP´s Integrator
417
Control is cool
418
Control issues and challenges in wastewater treatment plants
419
Control Issues Arising in Population Balance Models
420
Control issues for MEMS
421
Control issues for microelectromechanical systems
422
Control Issues for Postural Regulation at the Human Ankle
423
Control issues for systems of switched input
424
Control issues in active vision: open problems and some answers
425
Control issues in adjustable speed drives
426
Control issues in automated highway systems
427
Control issues in micromanipulation
428
Control issues in multimedia conferencing
429
Control Issues in Pilot/System Task Allocation
430
Control issues in rotary heart assist devices
431
Control Issues in Single-Stage Photovoltaic Systems: MPPT, Current and Voltage Control
432
Control issues in the creation of virtual enterprise
433
Control Issues of a ZCS Inverter
434
Control Issues of High Pole Count Machines at High Speed Operation
435
Control issues of insertion devices
436
Control issues of inverters in the formation of L. V. micro-grids
437
Control issues to improve visual control of motion: applications in active tracking of moving targets
438
Control issues to improve visual control of motion: applications in active tracking of moving targets
439
Control kernel in smart factory environments: Smart resources integration
440
Control laboratory experiments in thermoacoustics using the Rijke tube
441
Control labs for engineering technology today and the future
442
Control landscapes for observable preparation with open quantum systems
443
Control law and compensations of a Voltage Active Load for automotive applications
444
Control law decoupling for 2-D biped walking system
445
Control Law Design and Dynamic Evaluations for a MAGLEV Vehicle with a Combined Lift and Guidance Suspension System
446
Control law design and test of an experimental flutter margin augmentation system for an airplane
447
Control Law Design for Channel Flow - 2D Designs and 3D Performance Evaluation
448
Control law design for generalized singular LQ control problems
449
Control law design for handling qualities improvement and structural load alleviation in rotorcraft
450
Control law design for haptic interfaces to virtual reality
451
Control Law Design for Helicopter Based on Radial Basis Function Neural Network
452
Control Law Design for Switched Repetitive Processes with a Metal Rolling Example
453
Control law design of aircraft super-maneuverable flight based on dynamic surface backstepping control
454
Control Law Design of Mobile Robot Trajectory Tracking and Development of Simulation Platform
455
Control law design using repeated trials
456
Control law development for a four wheel direct drive EV
457
Control law for market-based semi-active tuned liquid column dampers
458
Control law for multiple obstacle avoidance of four-wheeled vehicle with limited steering angle by multilayer minimum projection method
459
Control Law for Rough Terrain Robot with Leg-type Crawler
460
Control law for transformerless converters connected to the grid through an L filter
461
Control law implementation for Multi-Iso: a training machine for lower limbs
462
Control law partitioning via fuzzy logic control
463
Control Law Proposition for the Stabilization of Discrete Takagi–Sugeno Models
464
Control law reconfiguration for non linear systems based on multilayer neural network and fuzzy model: application to a thermal plant
465
Control law synthesis and reconfiguration using SCT
466
Control law synthesis for discrete time and finite horizon dynamical systems under set bounded uncertainty: formulation, controller duality, solvers
467
Control law synthesis for distributed multi-agent systems: Application to active clock distribution networks
468
Control laws for a distributed traction and steering system
469
Control laws for a voltage dip series compensator
470
Control laws for systems with inequality models of uncertainty
471
Control Laws for the Emulation of an Electric Vehicle Drivetrain by Two Electric Machines
472
Control Laws For The Tele Operation Of An Unmanned Aerial Vehicle Known As An X4-flyer
473
Control laws involving distributed time delays: robustness of the implementation
474
Control laws to asymptotically improve kinesthetic transparency of a wearable joint
475
Control laws with hierarchical switch logic to accomodate EME-induced sensor failures
476
Control laws with integral action for marine vessels
477
Control layer for multi-vendor industrial robot interaction providing integration of supervisory process control and multifunctional control units
478
Control library for AR.Drone 2.0
479
Control limit of speed sensorless field-oriented drive for induction motor based on phase difference
480
Control limitation of a three-loop acceleration autopilot
481
Control limits consideration in discrete control system design
482
Control linear and nonlinear generalized synchronization of chaotic systems
483
Control list generation to reveal fraudulent customers for electricity provider companies
484
Control Location Selection Strategy for Power System Emergency Control
485
Control logic and cell design for a 4K NVRAM
486
Control logic and latching to the Faraday Cup experiment on the wind laboratory
487
Control logic design with Petri nets for integrated manufacturing systems
488
Control Logic for the Changeover of a Spare Transformer Unit at "El Furrial" Substation 400/230/34.5 kV
489
Control logic generation for machining systems using Petri net formalism
490
Control logic modelling scheme well suited to test problem
491
Control logic software components
492
Control Loop Design for a PFC Boost Converter With Ripple Steering
493
Control loop design for two-stage DC-DC converters with low voltage/high current output
494
Control loop design for two-stage DC-DC converters with low voltage/high current output
495
Control loop design of a two-stage bidirectional AC/DC converter for renewable energy systems
496
Control loop design of parallel connected converters using sliding mode and linear control techniques
497
Control loop design of sequential switching shunt regulator considering the influence of double section functioning
498
Control loop design of the sequential switching shunt series regulator
499
Control loop for optimization of power consumption in VLSI designs
500
Control loop interactions for secondary side post regulators
501
Control loop optimization - Knowing your environment
502
Control loop performance analysis over networked control systems
503
Control Loop Performance Assessment for Power Plants
504
Control Loop Performance Assessment With a Dynamic Neuro-Fuzzy Model (dFasArt)
505
Control loop performance monitoring
506
Control loop performance monitoring
507
Control loop scheduling paradigm in distributed control systems
508
Control Loop Sensor Calibration Using Neural Networks
509
Control loop simulation of flexible manufacturing system
510
Control loop study of a load commutated CSI-fed induction motor
511
Control Loop Study of Induction Motor Drives Using DQ Model
512
Control loop study of induction motor drives using dq model
513
Control loop timing analysis using truetime and jitterbug
514
Control loop tuning
515
Control Loops Comparative Study Based on IR Thermal Imaging for Electrical Drives with BLDC PM Motors
516
Control loops design in a grid supporting mode inverter connected to a microgrid
517
Control loops for a Coupled Dark State Magnetometer
518
Control Loops for the J-PARC RCS Digital Low-Level RF Control
519
Control Loops Selection for Damping Inter-Area Oscillation´s of Electrical Networks
520
Control loops selection to damp inter-area oscillations of electrical networks
521
Control loops selection to damp inter-area oscillations of electrical networks
522
Control Lyapunov function based receding horizon control for time-varying systems
523
Control Lyapunov Functionals and robust stabilization of nonlinear time-delay systems
524
Control lyapunov functions and hybrid zero dynamics
525
Control Lyapunov functions and stabilizability of compact sets for hybrid systems
526
Control Lyapunov functions for controllable series devices
527
Control Lyapunov Functions for Controllable Series Devices
528
Control Lyapunov functions for controllable series devices
529
Control Lyapunov functions for switched control systems
530
Control Lyapunov functions: new ideas from an old source
531
Control Lyapunov stabilization of affine discrete-time systems
532
Control Lyapunov-Razumikhin functions and robust stabilization of time delay systems
533
Control Lyapunov-Razumikhin functions for time delay systems
534
Control Means for Minimization of Losses in AC and DC Motor Drives
535
Control measures for improving power system reliability
536
Control Measures of Temperature Cracks in Mass Concrete for Bridge Base Slab
537
Control Measures To Ensure Dynamic Stability Of The Cahora Bassa Scheme And The Parallel Hvac System
538
Control Mechanism Analysis of Small-Agent Networks Using a Distinguished Node Model for Urban Traffic Controls
539
Control mechanism and security region for intentional islanding transition
540
Control Mechanism Design for Outbound Logistics Based on Credit Evaluation
541
Control mechanism for software pipelining on nested loop
542
Control mechanism modeling of human cardiovascular-respiratory system
543
Control mechanism of an autonomous jaw-movement simulator, JSN/1C, during open-close movement
544
Control mechanism of an organic self-regulating microfluidic system
545
Control mechanism of parallel active power filter under different compensation objectives
546
Control Mechanism to Solve False Blocking Problem at MAC Layer in Wireless Sensor Networks
547
Control Mechanisms and Market Knowledge Acquisition: An Empirical Study in China
548
Control mechanisms for high speed networks
549
Control mechanisms for packet audio in the Internet
550
Control Mechanisms for Residential Electricity Demand in SmartGrids
551
Control mechanisms for the opportunistic behavior in industry-university collaborations
552
Control mechanisms in a virtual cockpit
553
Control Mechanisms of Perceived Phase Error on Synchronized Tapping Toward Communication Support Systems based on Psychological Timing Control
554
Control medical - image is everything
555
Control memory word width optimization using multiple-valued circuits
556
Control Message Reduction Techniques in Backward Learning Ad Hoc Routing Protocols
557
Control messages delivery protocol
558
Control method analysis based on welding process
559
Control method and characteristics of active power filters
560
Control Method and Controller Design of Hydraulic Pile Driver Fuselage Leveling
561
Control method and motion path simulation of a mobile robot
562
Control method and snubber selection for a 5 MW wind turbine single active bridge DC/DC converter
563
Control Method and Tool Path Interpolation of Aspherical Grinding-Polishing
564
Control method based on Fuzzy cognitive map and its application on district heating network
565
Control method comparison of doubly fed wind generators connected to the grid by asymmetric transmission lines
566
Control method considerations for DC-DC converters in power buffer applications
567
Control method considering current and voltage limits in magnetic manipulation systems
568
Control method evaluation for battery energy storage system utilized in renewable smoothing
569
Control Method for a 3D Form Display with Coil-type Shape Memory Alloy
570
Control method for a combined active filter system employing a current source converter and a high pass filter
571
Control method for a combined active filter system employing a current source converter and a high pass filter
572
Control method for a novel converter topology for permanent magnet drives
573
Control method for a robot based on the adaptive attractor selection model
574
Control method for a single phase arbitrary waveform-output inverter
575
Control method for a three-port interface converter using an indirect matrix converter with an active snubber circuit
576
Control method for active filters
577
Control method for arm of soft humanoid robot
578
Control method for assistive devices for upper limbs
579
Control method for autonomous changing the number of DC-DC converters to improve efficiency
580
Control method for calculating optimum DC bus voltage to improve drive system efficiency in variable DC bus drive systems
581
Control Method for Cascaded H-Bridge Multilevel Inverter Failures
582
Control method for cascaded H-bridge multilevel inverter with faulty power cells
583
Control method for compensation of switching delays in transistors
584
Control method for DC-link voltage ripple cancellation in voltage source inverter under unbalanced three-phase voltage supply conditions
585
Control method for DC-link voltage ripple cancellation in voltage source inverter under unbalanced three-phase voltage supply conditions
586
Control method for direct torque controlled PMSG in wind power generation system
587
Control method for five level converter with common flying capacitors to avoid voltage level skip
588
Control method for flywheel array energy storage system in energy harvesting from electric railway
589
Control method for grid-connected converters in systems with non-ideal supply voltage
590
Control Method for High-Accuracy Fine Steering Mirror Based on Slow Sampling Rate of Tracking Sensor Signal
591
Control method for Inductive Power Transfer with high partial-load efficiency and resonance tracking
592
Control method for IPM motor without position sensor
593
Control method for IPMSM based on perfect tracking control and PWM hold model in overmodulation range
594
Control method for IPMSM based on PTC and PWM hold model in overmodulation range-Study on robustness and comparison with anti-windup control-
595
Control method for lower -limb rehabilitation robot joint flexibility
596
Control method for low-voltage DC power supply in battery-powered systems with power management
597
Control method for mono inverter dual parallel interior permanent magnet synchronous machine drive system
598
Control Method for Mono Inverter Dual Parallel Surface-Mounted Permanent-Magnet Synchronous Machine Drive System
599
Control method for multi-microgrid systems in smart grid environment—Stability, optimization and smart demand participation
600
Control Method For Permanent Magnet Synchronous Motors
601
Control Method for Power Quality Compensation Based on Levenberg-Marquardt Optimized BP Neural Networks
602
Control method for power-assist systems with energy regeneration system based on predicting operation
603
Control method for powered ankle prosthesis via internal model control design
604
Control method for reduction circulating current in parallel operation of DC distribution system for building applications
605
Control method for revolving speed and pressure based on information of resolution and fuzzy rule
606
Control Method for Single-Phase Shunt Active Power Filter
607
Control Method for Surgical Robot to Prevent Overload at Vulnerable Tissue
608
Control method for the number of checkpoint nodes for detecting selective forwarding attacks in wireless sensor networks
609
Control method for variable speed wind turbines to support temporary primary frequency control
610
Control method for voltage regulator based on estimated amount of photovoltaic generation power
611
Control method for voltage source converters in systems with high frequency variability
612
Control Method for Wireless Inductive Energy Transfer Systems With Relatively Large Air Gap
613
Control method in a wind turbine driven by 3-parallel back-to-back converters using PQR power transformation
614
Control method of 4WS based on neural network
615
Control method of a braking chopper to reduce voltage unbalance in a 3-level chopper
616
Control Method of a Doubly-Fed Induction Generator with a Grid Synchronization Against Parameter Variation and Encoder Position
617
Control method of a doubly-fed induction generator with automatic grid synchronization
618
Control method of a human support robot for independent living by center of gravity information of upper body
619
Control method of a photovoltaic powered reverse osmosis plant without batteries based on maximum power point tracking
620
Control method of a spherical ultrasonic motor
621
Control method of air cylinder actuator utilizing common bias pressure
622
Control method of checkpoint node selection using a fuzzy rule system and feedback in CHEMAS
623
Control method of dual-channel hybrid excitation doubly salient starter/generator
624
Control Method of Dynamic Inversion with Neural Network Used for Multi-Variable Nonlinear Flight Control System
625
Control method of electrolytic capacitor-less buck-boost converter for single-phase stand-by UPS
626
Control method of fractional-order PI controller applied in electric vehicle to grid based micro-grid stabilization device
627
Control Method of Fuel Cell Hybrid Bus
628
Control method of grid-connected PV-AC module with decoupling and energy storage
629
Control Method of Heavy Hydrostatic Thrust Bearing
630
Control method of linear generator for Maglev vehicle
631
Control method of linear motor drive table using observer for the vibration repression
632
Control Method Of Mobile Legs To Avoid Aerial Path Obstacles
633
Control method of modular interleaved boost converter for SOC balancing in EV
634
Control method of multiple power converter to reduce deterioration of fuel cells
635
Control method of multiple services for CMP based on continuation model
636
Control method of multivariate systems based on probability control algorithm
637
Control method of notch frequencies for coupled-resonator laminated band elimination filter
638
Control method of NPC inverter for continuous operation under one phase fault condition
639
Control Method of preventing splashing in the refining process of AOD furnace based on equal temperature zones
640
Control method of PWM inverter for driving LSM to reduce the burden of output transformer
641
Control method of robot manipulators by inertia identifier without using acceleration signal
642
Control method of robot suit HAL working as operator´s muscle using biological and dynamical information
643
Control method of rotation angular position zero point transition of stabilization platform framework
644
Control Method of Sensorless Brushless DC Motor Based on Neural Network
645
Control method of smoothing wind power output using battery energy storage system based on empirical mode decomposition
646
Control method of soft landing on asteroid based on the optimal sliding-mode guidance law
647
Control method of STATCOM for electric railway
648
Control Method of the Semi-Active Damper Coil System in the Superconducting Magnetically Levitated Bogie Against Vertical and Pitching Oscillation
649
Control Method of the Spring Back in Bending Micro and Precise Stamping Parts
650
Control method of the transient compensation process of a hybrid energy storage system based on battery and Ultra-capacitor in Micro-grid
651
Control method research of suspension system of engineering vehicle
652
Control method research on combined-levitation-and-propulsion system used in maglev vehicles
653
Control method research on wide flight envelope aerocraft
654
Control method suitable for direct torque control based motor drive system satisfying voltage and current limitations
655
Control Method Suitable for Direct-Torque-Control-Based Motor Drive System Satisfying Voltage and Current Limitations
656
Control Method to Increase the Reliability of IGBT Power Modules Validated on a Three Phase Inverter
657
Control method with digital PI dual close-loop for inverter
658
Control methodologies for precision positioning systems
659
Control methodologies for upper limb exoskeleton robots
660
Control methodologies in networked motion control systems
661
Control methodologies of large delays in networked control systems
662
Control methodologies: Peak reduction algorithms for DNO owned storage devices on the Low Voltage network
663
Control methodology for FMS
664
Control methodology for on-chip switching power supplies for biomedical implants
665
Control methodology for reaction force at impact based only on the viscoelasticity of muscles
666
Control methodology for single inverter, parallel connected dual induction motor drives for electric vehicles
667
Control methodology for single stator, dual-rotor induction motor drives for electric vehicles
668
Control methodology independent of the experiments to be deployed in remote labs of analog electronic
669
Control methodology of distributed generation in interconnected grids
670
Control methodology of nonlinearity in piezoelertric nanoactuator
671
Control methodology of stacker cranes for collision avoidance considering dynamics in a warehouse
672
Control methodology of three phase four wire current controlled voltage source active power filter for power quality improvement
673
Control Methodology to Mitigate the Grid Impact of Wind Turbines
674
Control methods and characteristics of power converter with large capacity for electric railway system
675
Control Methods and Compensation Characteristics of a Series Active Filter for a Neutral Conductor
676
Control methods and compensation characteristics of a series active filter for the neutral conductor
677
Control methods based on neural network forward and inverse models for a biomechanical structured vocal cord model on an anthropomorphic talking robot
678
Control methods for a brushless DC motor drive with a new converter topology
679
Control methods for active power filters with minimum measurement requirements
680
Control methods for active vibration minimization in drive systems of wind power plants
681
Control methods for DC-DC converters
682
Control methods for DC-DC converters
683
Control methods for DC-DC converters
684
Control methods for DC-DC converters
685
Control methods for DC-DC converters
686
Control methods for dynamical storage systems in wind parks
687
Control methods for EMI noises appearing in electric vehicle drive systems
688
Control methods for four-leg voltage source inverter
689
Control Methods for Good Dynamic Performance Induction Motor Drives Based on Current and Voltage as Measured Quantities
690
Control methods for guidance virtual fixtures in compliant human-machine interfaces
691
Control Methods for Improving the Reactive Power Characteristic of HVDC Links
692
Control methods for Low Voltage Ride-Through compliance in grid-connected NPC converter based wind power systems using predictive control
693
Control methods for microgrids
694
Control Methods for Reducing the Inductance in the DC Link of Current Source Inverters
695
Control methods for the chemical-mechanical polishing process in shallow trench isolation
696
Control methods for the distribution overhead line network
697
Control methods for three-phase active power filters under non-ideal mains voltages
698
Control Methods in Data-Storage Systems
699
Control Methods in DC-DC Power Conversion - A Comparative Study
700
Control methods of a cascade power regulation system for smart grid
701
Control methods of current balancing for parallel connected IGBTs
702
Control Methods of Deterministic Networked Control Systems
703
Control methods of EMI for modern radar
704
Control methods of half-bridge capacitor voltage clamped series resonant converter
705
Control methods of hybrid active power filters reduced rating of its converter
706
Control methods of hyper-flexible manipulators using their dynamical features
707
Control Methods of Inverter-Interfaced Distributed Generators in a Microgrid System
708
Control methods of mobile robot rough-terrain trajectory tracking
709
Control Methods of Traffic Congestion Based on Drivers´ Behavior Characteristics
710
Control methods on unstable periodic orbits of a chaotic dynamical system — control chaos in buck converter
711
Control methods suitable for electric vehicles with independently driven front and rear wheel structures
712
Control methods utilizing energy optimizing schemes in refrigeration systems
713
Control microelectronics¿or who needs a computer?
714
Control middleware for open robot controllers
715
Control migration: A characteristic of C3 systems
716
Control MMIC of GaAs MESFET
717
Control mode conversion considering nonlinear inductance parameter in the single phase switched reluctance motor
718
Control mode of network resources in multiservice telecommunication systems on basis of distributed system of agents
719
Control mode switching for teledrilling based on a hybrid system model
720
Control model and simulation for Adaptive Frontlight System of vehicle on curve roads
721
Control model for a large optical membrane mirror with inner ring control
722
Control model for loading systems using higher order singular value decomposition
723
Control model for networked embedded applications
724
Control model for optimizing the performance of weapons and equipment acquisition
725
Control model for robotic samara: Dynamics about a coordinated helical turn
726
Control model of a closed loop power-controlled series-type resonant induction heating system
727
Control Model of Bank Credit Risks Based on Commercial Age of Enterprise
728
Control model of human posture strategy selection
729
Control model of macroeconomic growth process
730
Control model of optimal storage for products with random replenishment intervals and time-varying deterioration rate
731
Control model of postural stability using LQR and fuzzy logic controller
732
Control Model of Regional Logistics Capability and Industrial Economy Based on Grey System
733
Control Modeling for Accelerator Leg of Robot Driver
734
Control modeling of a FACTS device connected to a synchronous generator
735
Control modeling of a micro-manipulator for human scale tele-operation system
736
Control modeling of an aircraft spare parts inventory and the optimal study
737
Control models and control strategies on hot strip mill´s laminar cooling system
738
Control modernization of SCR rectifiers with continuous device current monitoring
739
Control Modes of a Clinical Ventricular Assist Device
740
Control Modes of Step Motors
741
Control modes validation for generalized point to point task executions application: Robuter/UML mobile manipulator
742
Control modulation technique for client independent optical performance monitoring and transport of channel overhead
743
Control Module for Stepper Motor Based on FPGA
744
Control moment gyro (CMG) gimbal angle compensation using magnetic control during external disturbances
745
Control moment Gyro gimble motor ultra-low velocity control system design with direct-drive PMSM
746
Control moment gyroscope for swing motion control
747
Control moment gyroscope singularity reduction via decoupled control
748
Control monitoring of routing bits and data packets in WDM networks using wavelength-to-time mapping
749
Control monitoring of routing bits and data packets in WDM networks using wavelength-to-time mapping
750
Control movement scheme based on manipulability concept for a surgical robotic assistant
751
Control multiple mobile robots for object caging and manipulation
752
Control network architecture for an autonomous underwater vehicle divisamos project
753
Control network for modern street lighting systems
754
Control network generator for latency insensitive designs
755
Control network has a lot of bottle
756
Control Network Programming
757
Control Network Programming Illustrated: Solving Problems with Inherent Graph-Like Representation
758
Control objectives and systems analysis: innovation drivers for electric power-assisted steering
759
Control objectives for seismic simulators
760
Control of Δ-Y transformer based grid forming inverter for unbalanced stand-alone hybrid systems
761
Control of (max,+) automata: A single step approach
762
Control of (max,+) automata: Logical and timing aspects
763
Control of
-Axis Orientation of
Ordered FePt,
764
Control of 1-D and 2-D coupled map lattices through reinforcement learning
765
Control of 2 × 2 linear hyperbolic systems: Backstepping-based trajectory generation and PI-based tracking
766
Control of 2-DOF robotic manipulator using brushless DC motor to track the motion of object in a plane
767
Control of 2-periodic motion for bouncing ball
768
Control of 2R underactuated manipulator with friction
769
Control of 3 DOF helicopter: A novel autopilot scheme based on adaptive sliding mode control
770
Control of 3D printed ambidextrous robot hand actuated by pneumatic artificial muscles
771
Control of 3-dimensional snake robots by using redundancy
772
Control of 3-level shunt active power filter using harmonic selective controller
773
Control of 3-tap electrical feed-forward equalizer by conditional error counts from FEC in the presence of PMD
774
Control of 4-leg active power filter for reactive power and unbalance compensation
775
Control of 4-Leg VSC based DSTATCOM using modified Instantaneous Symmetrical Component Theory
776
Control of 6 DOF arm of the Humanoid Robot by Linear Visual Servoing
777
Control of 6DOF articulated robot with the direct-teaching function using EtherCAT
778
Control of a 1 kW switched reluctance generator using triac
779
Control of a 10/8 SRM based on the torque ripple minimization and speed feedback
780
Control of a 19 level cascaded H-bridge multilevel converter photovoltaic system
781
Control of a 2-DOF powered ankle-foot mechanism
782
Control of a 3-dimensional snake-like robot
783
Control of a 3-dimensional snake-like robot for analysis of sinus-lifting motion
784
Control of a 3-DOF Parallel Wire Driven Stiffness-Variable Manipulator
785
Control of a 3-phase 4 wire grid connected converter with active power filter and var compensation functionality for nonlinear loads
786
Control of a 4 leg inverter for standalone photovoltaic systems
787
Control of a 5DOF magnetically levitated positioning stage
788
Control of a 5DOF Magnetically Levitated Positioning Stage
789
Control of a 5-link biped robot for steady walking
790
Control of a 6/4 switched reluctance motor by means of a DC voltage supply with DC high voltage intermediary circuit
791
Control of a 65-watt 2-phase servomotor with a magnetic amplifier
792
Control of a 6MVA hybrid converter for a permanent magnet synchronous generator for windpower
793
Control of a 750kW permanent magnet synchronous motor
794
Control of a 9-DoF Wheelchair-mounted robotic arm system using a P300 Brain Computer Interface: Initial experiments
795
Control of a back-to-back VSC system from grid-connection to islanded mode in microgrids
796
Control of a ball and beam like mechanism
797
Control of a bank-to-turn (BTT) missile with saturating actuators
798
Control of a battery energy storage system accounting for the charge redistribution effect to dispatch the operation of a medium voltage feeder
799
Control of a battery energy storage system connected to a low voltage grid
800
Control of a battery supported dynamic voltage restorer
801
Control of a battery system to improve operation of a microgrid
802
Control of a battery-energy-storage system based on a cascaded H-Bridge converter under fault condition
803
Control of a BCI-based upper limb rehabilitation system utilizing posterior probabilities
804
Control of a bicycle using virtual holonomic constraints
805
Control of a bidirectional converter to interface ultracapacitor with renewable energy sources
806
Control of a bidirectional dual active bridge converter for charge and discharge of a Li-Ion Battery
807
Control of a bidirectional UPS system using a resonant current control loop
808
Control of a bidirectional Z-Source Inverter for hybrid electric vehicles in motoring, regenerative braking and grid interface operations
809
Control of a biogas co-firing CHP as an Energy Hub
810
Control of a biomass-furnace based on input-output-linearization
811
Control of a Biomimetic "Soft-actuated" 10DoF Lower Body Exoskeleton
812
Control of a biomimetic brain machine interface with local field potentials: Performance and stability of a static decoder over 200 days
813
Control of a biopile for hydrocarbon decontamination
814
Control of a bioprocess using orthonormal basis function fuzzy models
815
Control of a bioreactor using feedback linearization
816
Control of a bioreactor using static and dynamic sliding mode controllers
817
Control of a biped jogging robot
818
Control of a biped robot driven by elastomer-based series elastic actuator
819
Control of a biped robot in the double-support phase
820
Control of a Biped Robot Using the Robot Operating System
821
Control of a biped robot with flexible foot on an uneven terrain
822
Control of a Biped Robot With Support Vector Regression in Sagittal Plane
823
Control Of A Biped Somersault In 3D
824
Control of a biped walking with dynamic balance
825
Control of a BLDC motor for electromechanical cctuator
826
Control of a BLPM machine using an integrated torque sensor in place of a rotor position sensor
827
Control of a boom crane using installed stereo vision
828
Control of a boost converter for resistive input behavior in the continuous conduction mode
829
Control of a bow leg hopping robot
830
Control of a brachiating robot for inspection of aerial power lines
831
Control of a Bristol cylinder for wave energy generation
832
Control of a brushless DC motor using a torque vector method and modulated conduction
833
Control of a brushless DC motor/generator in a fuel cell hybrid electric vehicle
834
Control of a Brushless Doubly-Fed induction generator via a matrix converter
835
Control of a buck inverter for grid-connected PV systems: a digital and sliding mode control approach
836
Control of a cable-driven 2-DOF joint module with a flexible backbone
837
Control of a camera for active vision: foveated vision, smooth tracking and saccade
838
Control of a camless engine electromechanical actuator: position reconstruction and dynamic performance analysis
839
Control of a cantilever array by Periodic Networks of Resistances
840
Control of a cantilever pipe conveying fluid using neural network
841
Control of a car with a trailer using the Driver Assistance System
842
Control of a car-like mobile robot for parking problem
843
Control of a car-like robot using a dynamic model
844
Control of a car-like robot using a virtual vehicle approach
845
Control of a car-like robot using a virtual vehicle approach
846
Control of a cascade boost converter with a single active switch
847
Control of a Cascade STATCOM With Star Configuration Under Unbalanced Conditions
848
Control of a cascaded doubly fed induction generator supplying an isolated DC grid
849
Control of a cascaded H-bridge multilevel converter for grid connection of photovoltaic systems
850
Control of a center-node unified power flow controller in transmission line applications
851
Control of a center-out reaching task using a reinforcement learning Brain-Machine Interface
852
Control of a chemical process by multi regional state space systems
853
Control of a Class of
854
Control of a class of discrete time nonlinear systems with a time-varying structure
855
Control of a class of hybrid systems application to a water supply system
856
Control of a class of multivariable nonlinear systems without vector relative degrees: a backstepping approach
857
Control of a class of nonlinear cascade systems with input-dependent saturations
858
Control of a class of nonlinear discrete-time systems using multilayer neural networks
859
Control of a class of nonlinear systems by decentralized control
860
Control of a class of nonlinear systems by decentralized control
861
Control of a class of nonlinear systems in the presence of actuator saturation
862
Control of a class of nonlinear systems subject to periodic exogenous signals
863
Control of a class of nonlinear systems via linear controllers with application to robots
864
Control of a class of nonlinear systems with general constraints
865
Control of a Class of Nonlinear Systems with Input Delay Using Mean Value Theorem Approach
866
Control of a class of non-linear uncertain chaotic systems via an optimal Type-2 fuzzy proportional integral derivative controller
867
Control of a class of nonlinear uncertain systems by combining state observers and parameter estimators
868
Control of a class of nonlinear uncertain systems via compensated inverse dynamics approach
869
Control of a class of thrust-propelled underactuated vehicles and application to a VTOL drone
870
Control of a Class of Underactuated Mechanical Systems Using Sliding Modes
871
Control of a class of under-actuated systems with saturation using hierarchical sliding mode
872
Control of a Coin on a Rotating Table based on Its Equilibria Set
873
Control of a combined GTO/IGBT drive system for low torque ripple in a large permanent magnet synchronous motor
874
Control of a combined multiphase electric drive and battery charger for electric vehicle
875
Control of a combined photovoltaic/thermal energy system
876
Control of a compact, tetherless ROV for in-contact inspection of complex underwater structures
877
Control of a complete digital-based component-minimized single-phase to three-phase AC/DC/AC converter
878
Control of a complex traffic junction using fuzzy inference
879
Control of a constant turning force system via step-wise safe switching iterative feedback tuning
880
Control of a constrained water distribution network
881
Control of a container crane: fast traversing, and residual sway control from the perspective of controlling an underactuated system
882
Control of a continuous fluidized bed dryer using neural nets
883
Control of a continuously operated pole-changing induction machine
884
Control of a continuously stirred tank reactor using an asymmetric solution of the state-dependent Riccati equation
885
Control of a Continuous-time Stirred Tank Reactor via Robust Static Output Feedback
886
Control of a continuum electromechanical instability
887
Control of a converter with superconductive energy storage inductor
888
Control of a copper laser using neural networks
889
Control of a creeping snake-like robot
890
Control of a cyclic vehicular traffic flow based on the optimal velocity model — Experiments by using LEGO NXT
891
Control of a data exchange in a local system of automation of a master schedule
892
Control of a DC generator based on a Hybrid Excitation Synchronous Machine connected to a PWM rectifier
893
Control of a dc-dc Z-source driver used as a Synchronous Machine excitation system
894
Control of a desktop mobile haptic interface
895
Control of a DFIG-based wind system in presence of large grid faults: analysis of voltage ride through capability
896
Control of a direct drive IPM synchronous generator based variable speed wind turbine with energy storage
897
Control of a direct matrix converter induction motor drive with modulated model predictive control
898
Control of a direct-drive DC motor by fuzzy logic
899
Control of a direct-drive servo-valve actuated by a linear amplified piezoelectric actuator for aeronautic applications
900
Control of a discrete parts production system with random part production times to meet a given schedule
901
Control of a distillation column using fuzzy inference systems
902
Control of a distillation column using virtual analyzer
903
Control of a distillation column: a decentralized approach
904
Control of a distillation column: A decentralized approach
905
Control of a double fed induction generator (DFIG) connected to an unbalanced electrical grid
906
Control of a double inverted pendulum with hydraulic actuation: a case study
907
Control of a doubly fed induction generator for aircraft application
908
Control of a doubly fed induction generator in a wind turbine during grid fault ride-through
909
Control of a doubly fed induction generator in a wind turbine during grid fault ride-through
910
Control of a Doubly Fed Induction Generator via an Indirect Matrix Converter With Changing DC Voltage
911
Control of a doubly fed induction generator wind turbine under voltage sags
912
Control of a Doubly Fed Induction Wind Generator Under Unbalanced Grid Voltage Conditions
913
Control of a doubly-fed induction generator in wind park during and after line-voltage distortion
914
Control of a doubly-fed induction generator under grid faults using a d-q hysteresis current regulator
915
Control of a doubly-fed induction generator under unbalanced conditions considering the converter limits
916
Control of a doubly-fed induction generator via a Direct Two-stage Power Converter
917
Control of a Doubly-fed Induction Generator with an Indirect Matrix Converter with changing DC voltage
918
Control of a doubly-fed induction wind generator under unbalanced grid voltage conditions
919
Control of a dual boost power factor corrector for high power applications
920
Control of a dual drive to attenuate switching frequency ripple in a large permanent magnet synchronous motor (PMSM)
921
Control of a dual stage actuator system for noncircular cam turning process
922
Control of a dual stator winding induction machine as a source of dc power
923
Control of a Duct Flow Network for Wind Display in a Virtual Environment
924
Control of a dumbbell spacecraft using attitude and shape control inputs only
925
Control of a dynamic brake to reduce turbine-generator shaft transient torques
926
Control of a dynamic nonlinear/ uncertain system via a variable structure system approach
927
Control of a fast parallel robot with a redundant chain and gearboxes: experimental results
928
Control of a Fed-Batch Fermenter Based on a Linear Algebra Strategy
929
Control of a feeding robot
930
Control of a finger-arm robot by employing the steepest ascent method to modulate the finger’s manipulability
931
Control of a five-phase synchronous motors with third harmonic constrained injection
932
Control of a fleet of vehicles using Computer Vision, Cellular Automaton and Genetic Trained Behaviour
933
Control of a flexible air-breathing hypersonic vehicle based on adaptive mode suppression scheme
934
Control of a flexible arm by means of robustified MPC
935
Control of a flexible arm with input dead zone by a passivity based adaptive output feedback
936
Control of a flexible beam for optimum step response
937
Control of a Flexible Beam using Anticipatory Fuzzy Logic
938
Control of a flexible finger using electro-conjugate fluid
939
Control of a Flexible Frame in Slewing
940
Control of a flexible link hammer in a gravitational field and its application to a home robot tapping human shoulders
941
Control of a flexible manipulator tip using a multirate repetitive learning controller based on filtered tip reference input
942
Control of a flexible manipulator using a sliding mode controller with a fuzzy-like weighting factor
943
Control of a flexible manipulator with noncollocated feedback: time-domain passivity approach
944
Control of a flexible plate structure using particle swarm optimization
945
Control of a flexible robot arm
946
Control of a flexible robot arm using the stable factorization approach
947
Control of a flexible robot arm with bounded input: Optimum step responses
948
Control of a flexible robotic arm using PD, feedforward, and linear stabilizer
949
Control of a flexible spherical wrist
950
Control of a flexible-joint robot using neural networks
951
Control of a flexible-link manipulator
952
Control of a flexible-link robot using cascade analysis
953
Control of a fluidic muscle system using Neuro Active Force Control
954
Control of a flyback converter in power factor correction mode: compromize between the current constraints and the transformer volume
955
Control of a flyback converter operating in BCM using the natural switching surface
956
Control of a Flywheel Energy Storage System for Power Smoothing in Wind Power Plants
957
Control of a flywheel energy storage system for rural applications using a Split-Pi DC-DC converter
958
Control of a forced-circulation evaporator system as a case study for control engineering education
959
Control of A Formation with One Cyclic Relation in 3-dimensional Space
960
Control of a Four-Leg Converter for the Operation of a DFIG Feeding Stand-Alone Unbalanced Loads
961
Control of a Four-Link Biped in a Back Somersault Maneuver
962
Control of a four-link lightweight manipulator arm using fast output sampling
963
Control of a four-phase switched reluctance generator: experimental investigations
964
Control of a four-steering, planar five-bar linkage-walker
965
Control of a four-switch rectifier under unbalanced input voltage
966
Control of a four-wheel independently driven electric vehicle with a large sideslip angle
967
Control of a fractional jerk equation using the fractional Routh-Hurwitz criteria
968
Control of a Fuel Cell Based Z-Source Converter
969
Control of a fuel cell hybrid electric motorcycle
970
Control of a fuel cell stack loaded with DC/DC boost converter
971
Control of a full scale locomotive roller rig for the simulation of wheel sliding
972
Control of a full-converter Permanent Magnet Synchronous Wind Generator with Neutral Point Clamped converters during a network fault
973
Control of a fully-actuated airship for satellite emulation
974
Control of a GaAs monolithic
Ka
-band phase shifter using a high-speed optical interconnect
975
Control of a gantry crane: A reach control approach
976
Control of a general distribution system
977
Control of a generator-battery-ultracapacitor hybrid energy system using game theory
978
Control of a granulation process using a nonlinear MPC formulation
979
Control of a grid connected direct drive variable speed wind turbine
980
Control of a grid connected doubly-fed induction generators for wind energy conversion
981
Control of a grid connected modular multilevel converter under pulsed DC load
982
Control of a grid connected photovoltaic system
983
Control of a grid connected variable speed wind energy conversion system
984
Control of a grid-connected double-fed induction generator wind turbine
985
Control of a grid-connected variable speed WECS based on an induction generator fed by a matrix converter
986
Control of a ground vehicle using quadratic programming based control allocation techniques
987
Control of a Group of Mobile Robots Based on Formation Abstraction and Decentralized Locational Optimization
988
Control of a group of point mass vehicles using energy methods
989
Control of a haptic interface actuated by ultrasonic motors
990
Control of a heat exchanger using Takagi-Sugeno fuzzy model
991
Control of a heat patch monitoring system
992
Control of a heat-integrated co-ionic-conducting solid oxide fuel cell system
993
Control of a Heaving Buoy Wave Energy Converter for Potable Water Production
994
Control of a heavy material handling agricultural manipulator using μ-synthesis and robust gain scheduling
995
Control of a heavy-duty robotic excavator using time delay control with switching action with integral sliding surface
996
Control of a heterogeneous aerial-terrestrial formation using null space approach
997
Control of a Heterogeneous Two-Server Exponential Queueing System
998
Control of a heterogeneous vehicular platoon with uniform communication delay
999
Control of a high dexterity micro-robot based catheter for aortic aneurysm treatment
1000
Control of a high fidelity ungrounded torque feedback device: The iTorqU 2.1
