بر اساس عنوان

1
Comparing two methods to solve the layered sphere problem, application to electromagnetic induction sensors
2
Comparing two models based on the transcriptional regulation by KaiC of cyanobacteria rhythm
3
Comparing Two Models for Word Boundary Detection in a Phoneme Sequence Using Recurrent Fuzzy Neural Networks
4
Comparing Two New Gene Selection Ensemble Approaches with the Commonly-Used Approach
5
Comparing two newly proposed immunization strategies in networks
6
Comparing Two Non-Blocking Concurrent Data Switching Schemes for Network-on-Chip
7
Comparing two online tip-over avoidance algorithms for mobile manipulators
8
Comparing two operating-room-allocation policies for elective and emergency surgeries
9
Comparing two parallel logic-programming architectures
10
Comparing two scientific echo sounders
11
Comparing two software emergency process models
12
Comparing two systems: Beyond common random numbers
13
Comparing two testbench methods for hierarchical functional verification of a bluetooth baseband adaptor
14
Comparing Two Time-Scale and Time-Frequency based Methods in Newborns´ EEG Seizure Detection
15
Comparing two ways of congestion management in bilateral based power market
16
Comparing two-level and ordered binary decision diagram representations of logic functions
17
Comparing two-phase locking and optimistic concurrency control protocols in multiprocessor real-time databases
18
Comparing type-based and proof-directed decompilation
19
Comparing U.S. coast Guard buoy tender performance using simulation
20
Comparing Ucn with Fddi and Dqdb Using a Realistic Workload Model
21
Comparing underwater MAC protocols in real sea experiment
22
Comparing uniform and flexible policies for software maintenance and replacement
23
Comparing Unlicensed Mobile Access (UMA) and Voice Call Continuity (VCC) Architectures
24
Comparing unloaded Q-factor of a high-Q dielectric resonator measured using the transmission mode and reflection mode methods involving S-parameter circle fitting
25
Comparing Unscented and Extended Kalman Filter Algorithms in the Rigid-Body Point-Based Registration
26
Comparing upper tropospheric humidity from microwave satellite instruments and IGRA radiosonde data
27
Comparing upscaling algorithms from HD to Ultra HD by evaluating preference of experience
28
Comparing Urban Sensing Applications Using Event and Network-Driven Mobile Phone Location Data
29
Comparing US and international power and control cable standards
30
Comparing usage-based pricing schemes for broadband networks
31
Comparing user cognitive style and performance with text user interfaces and image user interfaces
32
Comparing user experiences in 2D and 3D videoconferencing
33
Comparing User Performance on an iPad to a 17-inch BackPad
34
Comparing user performance with interfaces designed to suit their cognitive style
35
Comparing utility and residential battery storage for increasing flexibility of power systems
36
Comparing UWB Freespace Propagation and Indoor Propagation Including Non-ideal Antennas
37
Comparing UWB GPR measurements and simulation of simple shaped buried targets
38
Comparing validation results for two DIME/PMESII models: Understanding coverage profiles
39
Comparing variance reduction techniques for Monte Carlo Simulation of trading and security in a three-area power system
40
Comparing various evolutionary algorithms on the parameter optimization of the valine and leucine biosynthesis in corynebacterium glutamicum
41
Comparing Various PM Synchronous Generators: A Feasible Solution for High-Power, Off-Highway, Series Hybrid, Electric Traction Applications
42
Comparing various types of minienvironments
43
Comparing various voice recognition techniques
44
Comparing vascular smooth muscle cell population migration on various surface chemistry modifications
45
Comparing VE locomotion interfaces
46
Comparing verification performance of kids and adults for Fingerprint, Palmprint, Hand-geometry and Digitprint biometrics
47
Comparing verification systems: interactive consistency in ACL2
48
Comparing verification systems: interactive consistency in ACL2
49
Comparing Vessel Trajectories Using Geographical Domain Knowledge and Alignments
50
Comparing viewpoint evaluation functions for model-based inspectional coverage
51
Comparing visual component composition environments
52
Comparing Visual Data Fusion Techniques Using FIR and Visible Light Sensors to Improve Pedestrian Detection
53
Comparing visualization techniques to structure collaborative concepts
54
Comparing VM-Placement Algorithms for On-Demand Clouds
55
Comparing voice with touch screen for controlling the instructor’s operating station of a flight simulator
56
Comparing voltage dip survey results
57
Comparing Voronoi and Laguerre Tessellations in the Protein-Protein Docking Context
58
Comparing water transparency measurements obtained with low-cost citizens science instruments and high-quality oceanographic instruments
59
Comparing watershed and FCM segmentation in detecting reticular pattern for interstitial lung disease
60
Comparing Wave Propagation Characteristics of MV XLPE Cable and Covered-Conductor Overhead Line using Time Domain Reflectometry Technique
61
Comparing wavelet transform with proper orthogonal decomposition
62
Comparing wavelet transforms and AR modeling as feature extraction tools for underwater signal classification
63
Comparing wavelet transforms for recognizing cardiac patterns
64
Comparing Weak and Strong PEEC-MoM Coupling
65
Comparing Web Services Performance and Recovery in the Presence of Faults
66
Comparing Web Services through Data Type Similarities
67
Comparing Web Services with other Software Components
68
Comparing Web services with SNMP in a management by delegation environment
69
Comparing wide field-of-view optical receivers for free space optical communications
70
Comparing wind generation profiles: A circular data approach
71
Comparing wind speed retrievals from GPS reflectometry with SFMR surface wind speeds in Huricane Ike (2008)
72
Comparing Wired-side and Wireless-side WLAN Monitoring Techniques: A Case Study
73
Comparing wireless data network standards
74
Comparing wireless sensor network routing protocols
75
Comparing with Chaotic Inertia Weights in Particle Swarm Optimization
76
Comparing with the best Benchmarking: a tool for continuous improvement - [Book review]
77
Comparing Xpatch, FISC, and ScaleME using a cone-cylinder
78
Comparion and analysis of spatial structure of two major urban agglomeration in the central area of China
79
Comparising of antialiasing filters in A / D converters
80
Comparision betweeen symmetric & new model asymmetric Z-source cascaded multilevel inverter fed IM for selective harmonic minimization & THD reduction with PV Cell input
81
Comparision between alicyclic resist platforms in advanced 193-nm and 157-nm lithography
82
Comparision between LPSAT and SMT for RTL verification
83
Comparision between two stand-alone PV configurations: Series PVs versus series VSCs
84
Comparision of classifier performances in diagnosing congestive heart failure using heart rate variability
85
Comparision of coding schemes for distribution networks reconfiguration
86
Comparision of different classifiers in fault detection in microgrid
87
Comparision of FieldBus Systems CAN, TTCAN, FlexRay and LIN in Passenger Vehicles
88
Comparision of frequency and time domain differential modulation in an OFDM system for wireless ATM
89
Comparision of giant magneto-resistance behavior with conductance change based on the bulk-scattering in pseudo spin-valve
90
Comparision of Hierarchial Mixed-Size Placement Algorithms for VLSI Physical Synthesis
91
Comparision of InGaAs absorptive grating structures in 1.55 μm InGaAsP/InP strained MQW gain-coupled DFB lasers
92
Comparision of Landsat and MODIS Estimates of Heat Fluxes: Effect of Surface Heterogeniety
93
Comparision of Measured and Calculated Radiation Patterns of a Radome Covered Antenna under Rain and Sleet Conditions
94
Comparision of methods for interference neutralisation in tripolar nerve recording cuffs
95
Comparision of microblogging service between Sina Weibo and Twitter
96
Comparision of multi-carrier techniques in seven-level asymmetric cascade multilevel inverter
97
Comparision of open loop system CLL & LCL resonant DC to DC converters
98
Comparision of open slot angle for asymmetry slot antenna using 3D finite element method
99
Comparision of PID controller & adaptive neuro fuzzy controller for robot manipulator
100
Comparision of potential paths selected by a malicious entity with hazardous materials : Minimization of time vs. minimization of distance
101
Comparision of power loss of three-phase induction motor of four techniques with PWM inverter supply
102
Comparision of Real-Time Crowd Simulation Methods Based on Parallel Architecture
103
Comparision of SACK TCP performance with and without LSS for high speed network
104
Comparision of scalar imagesbased on compression technique
105
Comparision of sol-gel and sputtering method properties of TiO2 thin film ultraviolet sensor
106
Comparision of the evaluation method for building energy consumption in Taiwan-EEWH with USGBC-LEED Green Building Rating System
107
Comparision of the operation efficiency of three fiber optical interferometers
108
Comparision of the probability of visibility of new planned mobile satellite systems (M-star, Celestri, SkyBridge)
109
Comparision of three kinds of wavelength conversion schmes based on nonlinear polarization rotation
110
Comparision of transient plasma parameters in multi-source pulsed RF CCP configurations
111
Comparision of two different architectures of multichannel readout ASICs for neurobiological experiments
112
Comparision of Two ICA Based Methods for Speckle Reduction of Polarimetric SAR Images
113
Comparision of two optimization criteria in antenna problems with free phase pattern
114
Comparision of two soft computing techniques for economic dispatch with piece wise quadratic cost function
115
Comparision of wide band gap semiconductors for power electronics applications
116
Comparision of XUV Filtering by Solid Layer for Attosecond Generation
117
Comparision Performance of Different Constellation with with FHT in ADSL System Based on DMT
118
Comparision scattering coefficient measurements by broad-band methods from 2 — 18 GHz using type N connectors
119
Comparision study of stereoscopy in computed tomography : Projection versus MIP
120
Comparisions of Mirror and Static Boundary Conditions in Incompressible Smoothed Particle Hydrodynamics
121
Comparisions of Robert, Prewitt, Sobel operator based edge detection methods for real time uses on FPGA
122
Comparison & examination the methods of direction-of-arrival estimation
123
Comparison & Analysis of HIGHT and SEED for the Protection of Biometric Information at U-Wellness Healthcare System
124
Comparison a simulation model of heat exchanger with real equipment
125
Comparison about EEG signals processing in BCI applications
126
Comparison about Inter-Network Traffic Cost of CDN-Liked Approach and Cluster-Based Approach in P2P Applications
127
Comparison about the Three Central Composite Designs with Simulation
128
Comparison Among Coaxial Microcalorimeter Models
129
Comparison among different diagnostic systems for medium voltage cable lines
130
Comparison among different diagnostic systems for medium voltage cable lines
131
Comparison among different via models based on Feature Selective Validation technique
132
Comparison among digital current controllers applied to power factor correction boost converters
133
Comparison among electronic start up methods for induction motors
134
Comparison among evolutionary algorithms and classical optimization methods for circuit design problems
135
Comparison among feature extraction techniques based on power spectrum for a SSVEP-BCI
136
Comparison among high-frequency and line-frequency commutated rectifiers complying with IEC 61000-3-2 standards
137
Comparison among homogeneous models and a voxel model on mammography: A Monte Carlo study using the GEANT4 code
138
Comparison among individual thermal cycling, vibration test and the combined test for the life estimation of electronic components
139
Comparison among inverters with D-? digital control
140
Comparison among iterative algorithms for phase retrieval
141
Comparison among methodologies for identification of pilot buses and its impact on the steady state secondary voltage control
142
Comparison Among Methods for k Estimation in k-means
143
Comparison among Methods of Ensemble Learning
144
Comparison among passive and active rectifier for seawave energy production
145
Comparison among PD detection methods for GIS on-site testing
146
Comparison among photovoltaic technologies: An experimental case study
147
Comparison Among Power LEDs for Automotive Lighting Applications
148
Comparison among PPF, APF, HAPF and a combined system of a shunt HAPF and a shunt thyristor controlled LC
149
Comparison among precision temperature compensated crystal oscillators
150
Comparison among prediction methods of site diversity system performances
151
Comparison among Quality Maps Applying in Phase Unwrapping for Different Terrain
152
Comparison among resource allocation methods with packet loss and power metrics in geostationary satellite scenarios
153
Comparison among several fiber coating for a solid phase microextraction (SPME) based electronic nose applied to wine discrimination
154
Comparison among SiC JFETs at 1 MHz hard-switched DC/DC converter
155
Comparison among Silicon modulators based on Free-Carrier Plasma Dispersion Effect
156
Comparison among simulated sea ice surface bidirectional reflectance factor (BRF), hemispherical-directional reflectance factor (HDRF) and field measurements
157
Comparison among some digital signal processing methods for no-coupling series-excited motor testing
158
Comparison among stabilization methods of fixed-speed wind generator system
159
Comparison among techniques for distorted waveforms analysis in power system
160
Comparison among the PD resistance behavior of different enameled wires when subjected to PWM voltage
161
Comparison among three blind equalizers using different constellation matched error functions for QAM signals
162
Comparison among three kinds of advanced water purifying processes: Prepositioned, medially positioned and post positioned biological treatment
163
Comparison among three kinds of hybrid particle swarm optimization algorithms
164
Comparison among three topologies of induction motor fed by inverter and controlled by DFC
165
Comparison among three types of dynamic current distribution control strategies
166
Comparison among time-delay neural networks, LVQ2 discrete parameter HMM and continuous parameter HMM
167
Comparison among traditional and new digital instruments for the measurement of the light flicker effect
168
Comparison among various Si3N4 waveguide geometries grown within a CMOS fabrication pilot line
169
Comparison analysis and simulation of capacity of model free (non-modelling adaptive) controller with PID regulator
170
Comparison analysis between PLS and NN in noninvasive blood glucose concentration prediction
171
Comparison analysis for validating methods of system simulation models
172
Comparison Analysis of AC Voltage Controllers Based on Experimental and Simulated Application Studies
173
Comparison analysis of adaptive free-space optical transmissions over turbulence channels
174
Comparison analysis of AVHRR albedo temporal changes and dust TSP data
175
Comparison analysis of data mining methodology and student performance improvement influence factors in small data set
176
Comparison analysis of demagnetization and torque ripple in accordance with freewheeling current in BLDC motor
177
Comparison Analysis of Demagnetization and Torque Ripple in Accordance With Freewheeling Current in PM BLDC Motor
178
Comparison Analysis of Efficiency for Step-Down and Step-Up Stress Accelerated Life Testing
179
Comparison analysis of H.264 and MPEG-4 digital video transport over wireless IPv4 networks
180
Comparison Analysis of HHT and Fourier Transformation in Network Fault
181
Comparison Analysis of Intra-Industry Trade in Service Industry among China, Japan and Korea
182
Comparison analysis of Ku-band SLAR sea surface images at VV and HH polarizations obtained during the joint US/Russia Internal Wave Remote Sensing Experiment
183
Comparison Analysis of Logistic Industry in China with Foreign Countries
184
Comparison analysis of loss calculation methods and measurement techniques in power electronics and motor systems
185
Comparison analysis of MAUT expressed in terms of Choquet integral and utility axioms
186
Comparison analysis of measured and estimated yield of grid-connected PV system
187
Comparison analysis of methods for deriving priorities in the analytic hierarchy process
188
Comparison analysis of methods implemented in MATHLAB for Fuzzy Logic algorithms
189
Comparison analysis of multi-channel echo cancellation using adaptive filters
190
Comparison analysis of multiple signal representation methods for PAPR reduction in OFDM systems
191
Comparison analysis of myriad estimator calculation algorithms
192
Comparison analysis of OFDM signal performance with Cyclic prefix and LDPC codes over AWGN channel
193
Comparison Analysis of Outdoor Channel Characteristics at 28 GHz and 2 GHz Using 3D Ray-Tracing Technique
194
Comparison analysis of resonant controllers in discrete domain taking into account the computational delay
195
Comparison analysis of statistical control charts for quality monitoring of network traffic forecasts
196
Comparison analysis of stochastic simulation for the spatial distribution of heavy metal pollution of soil
197
Comparison Analysis of Sustainable Development of Regional Energy Consumption in China: Based on DEA Windows Techniques
198
Comparison analysis of uncoded and trellis-coded multilevel QAM radio systems
199
Comparison analysis of vector network analyzer verification techniques
200
Comparison analysis of vendor managed inventory with consideration of transportation and inventory costs
201
Comparison analysis of VNA residual errors estimation algorithms with time domain separation
202
Comparison Analysis on International Competitiveness Evaluation of the Commercial Vehicle Industry Based on DAM Model
203
Comparison analysis on present image-based crack detection methods in concrete structures
204
Comparison analysis on supervised learning based solutions for sports video categorization
205
Comparison analysis on thermal performances of dual airflow windows
206
Comparison analysis to thermal aging properties of vegetable and mineral insulating oils
207
Comparison and adaptation of step length and gait speed estimators from single belt worn accelerometer positioned on lateral side of the body
208
Comparison and Analysis AODV and OLSR Routing Protocols in Ad Hoc Network
209
Comparison and Analysis Between Holt Exponential Smoothing and Brown Exponential Smoothing Used for Freight Turnover Forecasts
210
Comparison and Analysis Data-Centric Routing Protocols in Wireless Sensor Networks
211
Comparison and analysis for edge detection algorithms based on SQI image enhancement
212
Comparison and analysis for grid-connected photovoltaic standard systems
213
Comparison and analysis for the calculation methods of fractal dimension of river system
214
Comparison and analysis NDVI and RVI changes before and after typhoon in Hainan based on HJ-1CCD satellite images
215
Comparison and analysis of 2-D simulation results with two implosion radiation experiments on the Los Alamos Pegasus I and Pegasus II capacitor banks
216
Comparison and Analysis of Algorithms for Association Rules
217
Comparison and Analysis of Aseismic Performance of Different Systems of Cable-Stayed Bridge
218
Comparison and analysis of BLDC motor with radial and polar anisotropic plastic magnet
219
Comparison and analysis of cascaded and Quadratic Boost Converter
220
Comparison and Analysis of Classical Motor with Amorphous Iron Motor Based on Ansoft
221
Comparison and analysis of clustering techniques
222
Comparison and analysis of combinational circuits using different logic styles
223
Comparison and Analysis of Cryptographic Algorithms Aiming Performance Improvement in Secure Web Services
224
Comparison and Analysis of Data Assimilation Algorithms for Predicting the Leaf Area Index of Crop Canopies
225
Comparison and analysis of data upscaling schemes for predicting crop leaf area index
226
Comparison and analysis of DBD-ozonizers powered by current-and voltage-mode power supplies
227
Comparison and analysis of defuzzification methods of a fuzzy controller to maintain the cane level during cane juice extraction
228
Comparison and analysis of delay elements
229
Comparison and Analysis of Different Energy Storage Techniques Based on their Performance Index
230
Comparison and analysis of different reputation systems for peer-to-peer networks
231
Comparison and Analysis of Distributed Detection Algorithms for Ground Moving Targets in Sensor Networks
232
Comparison and analysis of economy of wind turbine installation vessels
233
Comparison and analysis of ECSS based turbo decoder stopping rules
234
Comparison and analysis of electrical impedance tomographic images reconstructed using two algorithms
235
Comparison And Analysis Of Fano And Stack Sequential Decoding Of High-rate Punctured Convolutional Codes
236
Comparison and Analysis of Flow Features at the Packet Level for Traffic Classification
237
Comparison and Analysis of Flux-Switching Permanent-Magnet Double-Rotor Machine With 4QT Used for HEV
238
Comparison and analysis of gridding methods of multi-beam echo sounder
239
Comparison and analysis of indoor wireless positioning techniques
240
Comparison and analysis of integrated passive device technologies for wireless radio frequency module
241
Comparison and analysis of measurement and parameter based admission control methods for Quality of Service (QoS) provisioning
242
Comparison and Analysis of MIMO Channel Capacity
243
Comparison and analysis of models predicting transcriptional regulatory modules based on different backgrounds
244
Comparison and analysis of nonlinear algorithms for compressed sensing in MRI
245
Comparison and Analysis of Novel Architectures for Media Compression
246
Comparison and analysis of phase noise in ring oscillators
247
Comparison and Analysis of PON´s Access Architectures for Smart Grid Applications
248
Comparison and analysis of power quality test method in PV grid system
249
Comparison and analysis of PV station dynamic reactive power performance testing method
250
Comparison and analysis of Quotient Remainder Compression-algorithms for automotives
251
Comparison and analysis of research methods for urban heat island effect based on Landsat TM6
252
Comparison and analysis of scan matching techniques for Cooperative-SLAM
253
Comparison and Analysis of Secure Mobile Architecture (SMA) and Evolved Packet System
254
Comparison and Analysis of Single-Phase Transformerless Grid-Connected PV Inverters
255
Comparison and analysis of software and directory coherence schemes
256
Comparison and analysis of soil moisture retrieval model from CBERS-02B satellite imagery
257
Comparison and analysis of solving travelling salesman problem using GA, ACO and hybrid of ACO with GA and CS
258
Comparison and analysis of sufficient conditions for fuzzy systems as universal approximators
259
Comparison and Analysis of the Contactless Power Transfer Systems Using the Parameters of the Contactless Transformer
260
Comparison and Analysis of the Development in Grading Subjective Tests Algorithms
261
Comparison and analysis of the Lyapunov exponents of blood flow signal of healthy and stenotic artery
262
Comparison and Analysis of the Selection Mechanism in the Artificial Bee Colony Algorithm
263
Comparison and Analysis of the Uncoded and Coded Multi-user TH-BPAM UWB System
264
Comparison and analysis of transformation models on UAV image mosaic
265
Comparison and analysis of two fractal dimension computing algorithms for upscaling remote sensing Leaf Area Index map
266
Comparison and analysis of Urban Heat Island Effects for middle-sized cities in Chengdu plain based on NOAA/AVHRR
267
Comparison and analysis of various PFD architecture for a phase locked loop design
268
Comparison and analysis on common modulation strategies for the cascaded multilevel STATCOM
269
Comparison and Analysis on Different Finite Element Models of Gear Interfacial Contact Temperature
270
Comparison and analysis on over-voltage and insulation coordination of UHV AC transmission system between China and Japan
271
Comparison and Analysis on Practical Teaching Model of Electronic Commerce
272
Comparison and analysis on ship types of small and medium size trailing suction hopper dredger
273
Comparison and Analysis on Very Fast Transient Overvoltage Based on 550kV GIS and 800kV GIS
274
Comparison and analysis research on geometric correction of remote sensing images
275
Comparison and Analysis Study of SHA-3 Finalists
276
Comparison and analyzing propagation models
277
Comparison and application of different VHDL-based fault injection techniques
278
Comparison and application of evolutionary programming techniques to combined economic emission dispatch with line flow constraints
279
Comparison and application of FDTD and ray optical method for indoor wave propagation modeling
280
Comparison and application of near-field ISAR imaging techniques for far-field Radar cross section determination
281
Comparison and application of self-tuning DE/HDE based algorithms to solve optimal reactive power dispatch problems with multiple objectives
282
Comparison and application of signal denoising techniques based on time-frequency algorithms
283
Comparison and application of swarm intelligent techniques to Optimal Power Flow
284
Comparison and application of three integral-improved methods on conventional fuzzy control strategy
285
Comparison and application possibilities of JPEG and fractal-based image compressing methods in the development of multimedia-based material
286
Comparison and assessment of current-source-inverter-fed induction motor drive systems with unity power factor
287
Comparison and assessment of different polarization mode dispersion models
288
Comparison and Assessment of Improved Grey Relation Analysis for Software Development Effort Estimation
289
Comparison and Calibration of Fluxgate and SQUID Magnetorelaxometry Techniques for the Characterization of Magnetic Core-Shell Nanoparticles
290
Comparison and characterization of a typical strain gage trace against another using the printed method
291
Comparison and choice of models in tracking target with coordinated turn motion
292
Comparison and classification of objective-converting methods in multi-objective reactive power optimization using contour lines
293
Comparison and combination of adaptive query shifting and feature relevance learning for content-based image retrieval
294
Comparison and combination of different CRBE based MLP features for LVCSR
295
Comparison and combination of ear and face images in appearance-based biometrics
296
Comparison and combination of emergency control methods for voltage stability
297
Comparison and combination of features in a hybrid HMM/MLP and a HMM/GMM speech recognition system
298
Comparison and combination of imaging techniques for three dimensional analysis of electrical trees
299
Comparison and combination of iris matchers for reliable personal identification
300
Comparison and Combination of Lightly Supervised Approaches for Language Portability of a Spoken Language Understanding System
301
Comparison and combination of multiband classifiers for landsat urban land cover mapping
302
Comparison and combination of TAI time links with continuous GPS carrier phase results
303
Comparison and combination of two novel commercial detection methods
304
Comparison and considerations in the implementation of dual loop synchronous and stationary controllers for microgrids applications
305
Comparison and Conversion of Dynamic Models of Speed Governor for Transient Stability Analysis in BPA and PSS/E
306
Comparison and cooperation of using camera and acoustic emission for solid particle flow measurement
307
Comparison and correlation of ESD HBM (human body model) obtained between TLPG, wafer-level, and package-level tests
308
Comparison and Design Analysis of Pulse Transformer for HID Ballasts
309
Comparison and design of 3-D terahertz pulsed imaging systems
310
Comparison and design of different electrical machine types regarding their applicability in hybrid electrical vehicles
311
Comparison and Design of High Performance Straight-Line and Circular Arc Interpolations
312
Comparison and design of InterCell transformer structures in fault-operation for parallel multicell converters
313
Comparison and design of servo controllers for dual-stage actuators in hard disk drives
314
Comparison and design of servo controllers for dual-stage actuators in hard disk drives
315
Comparison and design of three coupled inductor structures
316
Comparison and design of VCOs for ultra-low power CMOS temperature sensors
317
Comparison and detection of abnormal conditions in induction motors
318
Comparison and Determination of Acetic Acid of Plum Vinegar Using Visible/Near Infrared Spectroscopy and Multivariate Calibration
319
Comparison and determination the electrical motors which are used in electrical transportation systems
320
Comparison and discussion of the Bill of the Quantities between the mainland China and Hong Kong Special zone
321
Comparison and discussion on potential mitigating measures regarding inductive interference of metallic pipelines
322
Comparison and dynamic behavior of moving- coil linear oscillatory actuator with/without mechanical spring driven by rectangular voltage source
323
Comparison and electrical modeling of new polymeric cellular electrets
324
Comparison and empirical validation of optimizing and agent-based models of the Italian electricity market
325
Comparison and Enlightenment of e-Commerce Policies among Shenzhen, Hangzhou and Suzhou in China
326
Comparison and error analysis of integral-free Kalman tracking filter algorithms
327
Comparison and error analysis of the standard pin-hole and Scheimpflug camera calibration models
328
Comparison and evaluation between MODIS vegetation indices in Northwest China
329
Comparison and evaluation of acceleration based step length estimators for handheld devices
330
Comparison and evaluation of advanced motion models for vehicle tracking
331
Comparison and evaluation of boundary conditions for the absorption of guided waves in an FDTD simulation
332
Comparison and Evaluation of Cesium Atomic Beam Frequency Standards
333
Comparison and Evaluation of Charge Equalization Technique for Series Connected Batteries
334
Comparison and Evaluation of Clone Detection Tools
335
Comparison and evaluation of different compound-structure permanent-magnet synchronous machine used for HEVs
336
Comparison and evaluation of different three-level inverter topologies for PV systems
337
Comparison and evaluation of electromagnetic absorption characteristics in realistic human head models of adult and children for 900-MHz mobile telephones
338
Comparison and Evaluation of Identity Management in Three Architectures for Virtual Organizations
339
Comparison and Evaluation of Induction Generator Models in Wind Turbine Systems for Transient Stability of Power System
340
Comparison and Evaluation of ITU-R Recommendation P.1546 Versions
341
Comparison and evaluation of knowledge modeling techniques towards the definition of a global approach: MNEMO (Methodology for kNowledgE acquisition and MOdelling)
342
Comparison and evaluation of leakage flux on various types of dental magnetic attachment
343
Comparison and Evaluation of Methods for Liver Segmentation From CT Datasets
344
Comparison and evaluation of network-based IP mobility management schemes
345
Comparison and evaluation of packing schemes for MPEG-2 over ATM using AAL5
346
Comparison and Evaluation of PET/CT Image Registration
347
Comparison and evaluation of polarimetric change detection techniques in aerial SAR data
348
Comparison and Evaluation of Radiation Damages in MZOS and MZNOS SAW Monolithic Structures
349
Comparison and evaluation of robotic strength rehabilitation algorithms: Isokinetic, isotonic and shared control method
350
Comparison and evaluation of signal representations for a carbon nanotube computational device
351
Comparison and evaluation of sub-module configurations in modular multilevel converters
352
Comparison and evaluation of the PLL techniques for the design of the grid-connected inverter systems
353
Comparison and Evaluation of the T-Lohi MAC for Underwater Acoustic Sensor Networks
354
Comparison and evaluation of three main types of wind turbines
355
Comparison and evaluation of three optimization algorithms in MRF model for brain tumour segmentation in MRIs
356
Comparison and evaluation of two catalytic migration approaches for the design of windowing-oriented register file structures
357
Comparison and evaluation of vibration-based piezoelectric power generators
358
Comparison and Experimental Verification of Two Low-complexity Digital Predistortion Methods
359
Comparison and extension of recent one-dimensional bipolar transistor models
360
Comparison and extensions of control methods for narrow-band disturbance rejection
361
Comparison and fusion model in protein motifs
362
Comparison and fusion of multiple iris and periocular matchers using near-infrared and visible images
363
Comparison and fusion of multiresolution features for texture classification
364
Comparison and fusion of vision and range measurements for robot pose estimation
365
Comparison and generalization of recent surface potential models for fully depleted SOI MOSFETs
366
Comparison and hybridization of neural networks and fuzzy logic in biomedical applications
367
Comparison and Identification of Static Electrical Terminal Fuel Cell Models
368
Comparison and IIP2 analysis of two wideband Balun-LNAs designed in 65nm CMOS
369
Comparison and Impact of Substrate Noise Generated by Clocked and Clockless Digital Circuitry
370
Comparison and implementation of a 16-bit fixed-point audio resampler
371
Comparison and implementation of a 3-level NPC voltage link back-to-back converter with SiC and Si diodes
372
Comparison and implementation of motion detection methods for sperm detection and tracking
373
Comparison and implementation of the global models of terrestrial net primary productivity
374
Comparison and implication: Patent strategies of China, Japan and U.S.A
375
Comparison and implications of charge collection measurements in silicon and InGaAs irradiated by energetic protons and neutrons
376
Comparison and improvement of association rule mining algorithm
377
Comparison and improvement of Dempster-Shafer models
378
Comparison and improvement of evolutionary programming techniques for power system optimal reactive power flow
379
Comparison and Improvement of Inverse Techniques for MEG Source Connectivity Network Reconstruction
380
Comparison and improvement of PCA and LBP efficiency for face recognition
381
Comparison and improvement of the diffracted current basis functions for the MM-PO technique [method of moments-physical optics technique]
382
Comparison and incident angle dependency for the relation between σ0 and biomass derived from PALSAR
383
Comparison and integrated use of differential evolution and genetic algorithms for space trajectory optimisation
384
Comparison and integration of GPS and DInSAR deformation time-series
385
Comparison and integration of heuristic and statistical models of landslide susceptibility mapping
386
Comparison and interpretation of conventional versus correlation processed bottom and sub-bottom records
387
Comparison and Investigation of Hopping Rate Estimation Processes
388
Comparison and investigation on income disparity in China and western developed countries
389
Comparison and its simulation of centralized and distributed MPPT structure
390
Comparison and mitigation of common mode voltage in power converter topologies
391
Comparison and model of on-chip transmission lines with and without metal grounding in CMOS process
392
Comparison and modification of customer satisfaction indexes
393
Comparison and optimisation of CSMA/CA back-off distribution functions for a low earth orbit satellite link
394
Comparison and optimisation of different ohmic contact metallisations for InP-HEMT structures with doped and undoped cap-layers
395
Comparison and optimisation of optical single sideband transmitters
396
Comparison and optimization of antenna concepts for downlink beamforming
397
Comparison and optimization of digital read channels using actual data
398
Comparison and optimization of edge termination techniques for SiC power devices
399
Comparison and optimization of high frequency inductors for critical model GaN converter operating at 1MHz
400
Comparison and optimization of lift and drag forces on vehicles levitated by eddy current repulsion for various null and normal flux magnets with one or two tracks
401
Comparison and optimization of methods of color image quantization
402
Comparison and performance analysis of AntNet and distance vector routing protocol in telecommunication networks Case study : XYZ company
403
Comparison and performance analysis of clustering protocol using sleep&wakeup technique in WSN
404
Comparison and Performance Evaluation of Mobile Agent Platforms
405
Comparison and performance evaluation of orthogonal frequency and multi-carrier code division multiple access systems
406
Comparison and performance evaluation of renewable to grid integration schemes: Single-phase high-frequency fuel cells and PV inverters applications
407
Comparison and performance study of different I/Q imbalance and channel compensation schemes for OFDM receivers
408
Comparison and practical implementation of type-reduction algorithms for type-2 fuzzy sets and systems
409
Comparison and Prioritization among Evaluation Models with Principal Component Analysis in Suppliers Selecting
410
Comparison and Prospect Study on Multiple Face Detection and Recognition Methods
411
Comparison and Reduction of Conducted EMI in SiC JFET and Si IGBT-Based Motor Drives
412
Comparison and research the regional entrepreneurial cultural differences between Jiangxi and Zhejiang
413
Comparison and review of electric machines for integrated starter alternator applications
414
Comparison and review of islanding detection techniques for distributed energy resources
415
Comparison and selection of high-voltage large-capacity D-STATCOM main circuit
416
Comparison and selection of magnetic materials for coupled inductor used in interleaved three-level multi-phase DC-DC converters
417
Comparison and selection of overlay extra high voltage in North West China power network
418
Comparison and Selection of the Method for Reconstructing Trititum Concentration Series in Precipitation
419
Comparison and selection on scheme of tunnel construction under soft plastic-flow stratum
420
Comparison and silicon realization of custom designed MEMS biomedical pressure sensors
421
Comparison and Simulation of Linear/LOG CFAR Algorithms
422
Comparison and simulation of rotor flux estimators in stationary and rotating reference frame in the vector control of induction motors for low-speed applications
423
Comparison and simulation of two new schemes in solar inverters for Harmonic reduction
424
Comparison and simulation of two resolve plane algorithms in the strapdown fiber-optic gyro multi-positions north seeking
425
Comparison and simulation of wavelength allocation algorithms on passive optical networks
426
Comparison and Status of 32 Bit Backplane Bus Architectures
427
Comparison and study of 6/5- and 12/10-pole permanent magnet flux-switching motors considering flux-weakening capability
428
Comparison and Study of Classic Feature Point Detection Algorithm
429
Comparison and study of some variants of partially tied covariance modeling
430
Comparison and suppression of conducted EMI in SiC JFET and Si IGBT based motor drives
431
Comparison and tendency of main mobile payment technologies in China
432
Comparison and tests of different virtual arrays for MIMO radar applications
433
Comparison and the analysis of the processes of the movement of air through the human breathing system and its natural model
434
Comparison and trends in today´s dominant E2technologies
435
Comparison and tuning of MPI implementations in a grid context
436
Comparison and unification of genomic signatures in breast cancer
437
Comparison and validation of high frequency ultrasound detection techniques in a mouse model for renal tumors
438
Comparison and validation of tissue modelization and statistical classification methods in T1-weighted MR brain images
439
Comparison and verification of load model based on PSASP
440
Comparison and verification of urban propagation models
441
Comparison and versioning of scientific workflows
442
Comparison and visualization of feature space behaviour of statistical and neural classifiers of satellite imagery
443
Comparison BAM and discrete Hopfield networks with CPN for processing of noisy data
444
Comparison based distributed generation implementation algorithm for the performance enhancement of radial distribution system
445
Comparison Based Group Ranking Outcome for Multiattribute Group Decisions
446
Comparison based selective harmonic elimination using a modified reference signal
447
Comparison betweeen two 1 kW PV grid-connected systems (one with a new tracker and one fixed)
448
Comparison between <100> and <110> oriented channels in highly strained FDSOI nMOSFETs
449
Comparison between <100> and <110> oriented channels in highly strained FDSOI pMOSFETs
450
Comparison between Ω´-QPP and random interleavers for space-time turbo codes using doubly iterative decoding algorithm
451
Comparison between /spl pi//4 DQPSK and differential QFM in AWGN channel
452
Comparison between `power matrix model´ and `time domain model´ in modelling large signal responses of DFB lasers
453
Comparison Between {\\hbox {Nb}}_{3}{\\hbox {Al}} and {\\hbox {Nb}}_{3}{\\hbox {Sn}} Strand
454
Comparison between 1D transient elastography and Supersonic Shear Imaging technique: Application to the arterial wall elasticity assessment
455
Comparison Between 2-D and 3-D Electromagnetic Modeling of Railgun
456
Comparison between 2D and 3D modeling of an EHV post station insulator equipped with a grading ring
457
Comparison between 2-D cross correlation with 2-D sub-sampling and 2-D tracking using beam steering
458
Comparison between 2-level and 3-level grid connected inverters implemented using SRF PLL technique
459
Comparison between 3 and 8 Leg 6-DOF shake table
460
Comparison between 3D eddy current patterns in Tokamak in-vessel components generated by disruptions
461
Comparison between 3D, 2D finite element methods and analytical calculations for electromagnetic problems
462
Comparison between 5 and 6 Phases Claw Pole Alternator for Automotive Application
463
Comparison between 60-GHz UWB frequency modulation and UWB impulse-radio location systems
464
Comparison between 65nm bulk and PD-SOI MOSFETs: Si/BOX interface effect on point defects and doping profiles
465
Comparison between 9-level hybrid asymmetric and conventional multi-level inverters for medium voltage application
466
Comparison between a 4-DOF hybrid module and Tricept module focusing on inverse kinematics and stiffness
467
Comparison between a backstepping mode control and a sliding mode control for a boost DC-DC converter of a photovoltaic panel
468
Comparison between a chip for realtime skeleting of images and its corresponding discrete realisation-a case study
469
Comparison between a detailed and a simplified finite element model of radio-frequency lesioning in the brain
470
Comparison between a deterministic and a Bayesian approach in image reconstruction
471
Comparison Between a Full-Wave and a Quasi-Static Analysis for High-Frequency Interconnects Crossover in Multilayered Dielectric Media
472
Comparison between a fuzzy controller and classic controller applied to stabilize a humanoid robotic platform
473
Comparison between a fuzzy PID controller and a kind of nonlinear PID controller
474
Comparison between a germanium orthogonal strip detector and an Anger camera through a simulation and modeling study
475
Comparison between a Hardware and a software synthesizer
476
Comparison between a hybrid multilevel converter employing half-bridge modules and a hybrid multilevel converter employing H-Bridge modules
477
Comparison Between A Low-cost, Expendable Meteorological Buoy System And A Shipboard Meteorological System
478
Comparison between a Mach-Zender interferometer and a Michelson interferometer employing Faraday mirrors for delayed self-heterodyne interferometry
479
Comparison between a magneto-optical method and Fannin´s technique for the measurement of Brown´s relaxation frequency of ferrofluids
480
Comparison between a measure based on mutual information and frequency importance functions for consonant recognition
481
Comparison between a neural fuzzy system- and a backpropagation-based fault classifiers in a power controller
482
Comparison between a non-linear and linear mathematical model for an electro-hydraulic servo-actuator
483
Comparison between a novel claw-pole electrically magnetized synchronous machine without slip-rings and a permanent magnet machine
484
Comparison between a novel zero-switching-loss topology and two existing zero-current-transition topologies
485
Comparison between a permeance network model and a 2D finite element model for the inrush current computation in a three phase transformer
486
Comparison Between A Posteriori Error Indicators For Adaptive Mesh Generation In Semiconductor Device Simulation
487
Comparison between a Proposed QoS Mathematical Model and other IP QoS Models
488
Comparison between a quasistatic space-domain analysis and a full-wave spectral-domain analysis for high-frequency interconnecting crossover in multilayered dielectric media
489
Comparison between a simulated and measured image of a fibre Bragg grating
490
Comparison between a spoke-type PMSM and a PMASynRM using ferrite magnets
491
Comparison between a Ti cap cobalt silicide to a flashed Ti-Ti cap cobalt silicide
492
Comparison between a vector multiport network analyzer and the national S-parameter: measurement system
493
Comparison between AC and DC flashover performance and discharge process of ice-covered insulators under the conditions of low air pressure and pollution
494
Comparison between acceleration-enhanced adaptive filters and neural network filters for respiratory motion prediction
495
Comparison between access selection algorithms in multi-operator wireless networks
496
Comparison between Acoustic Radiation Force Impulse (ARFI)-based hepatic stiffness quantification in deformed and undeformed pressurized canine livers
497
Comparison between active AC-DC converters for low power energy harvesting systems
498
Comparison Between Active and Passive Shielding Designs for a Large Acceptance Superconducting Dipole Magnet
499
Comparison between Adaptive and Fuzzy logic controllers for advance microwave biodiesel reactor
500
Comparison between Adaptive and Model-Based Extended Kalman Filters
501
Comparison between Adaptive and Non-adaptive HRBF Neural Network in Multiple Steps Time Series Forecasting
502
Comparison between Adaptive Double-Threshold Based Energy Detection and Cyclostationary Detection Technique for Cognitive Radio Networks
503
Comparison between adaptive linear controller and radial basis function neurocontroller with real time implementation on magnetic levitation system
504
Comparison between adaptive OFDM and single carrier modulation with frequency domain equalization
505
Comparison between adaptive search and bit allocation algorithms for image compression using vector quantization
506
Comparison between Adaptive Software Development and Feature Driven Development
507
Comparison between adjar and xDawn algorithms to estimate Eye-Fixation Related Potentials distorted by overlapping
508
Comparison between AEKF and EKF about homing UAV under passive guidance
509
Comparison between Agilent and National Instruments functional test systems
510
Comparison between air-core and laminated iron-core inductors in filtering applications for switching converters
511
Comparison between Al2O3 thin films grown by ALD using H2O or O3 as oxidant source
512
Comparison between Alloy and Timed Automata for modelling and analysing of access control specifications
513
Comparison between alpha-beta and DQ-PI controller applied to IUPQC operation
514
Comparison between aluminum oxide surface passivation films deposited with thermal ALD, plasma ALD and PECVD
515
Comparison between AMCXO and MCXO and necessity to develop AMCXO
516
Comparison between an AC-DC matrix converter and an interleaved DC-dc converter with power factor corrector for plug-in electric vehicles
517
Comparison between an analytic method and a numerical calculation to determine the end winding inductances of a turbo generator
518
Comparison Between an Analytical Asymptotic Fiber Drawing Model With Full Navier-Stokes Solution Taking Into Account the Effects of Inner Pressure and Surface Tension
519
Comparison between an analytical method and two numerical methods on a given electrostatic potential determination problem
520
Comparison between an electronic nose and a human sensory panel for wine compound detection
521
Comparison between an image- and a sinogram-based correction algorithm for partial volume effect in 3D PET imaging
522
Comparison between an in-house vs. a commercial control system for beam line control
523
Comparison between an integrated and a discrete transmitter for high line rate OTDM systems
524
Comparison between an optical dielectric resonator nano-antenna reflectarray and an equivalent dielectric grating reflector
525
Comparison between analog and digital control of LLC converter
526
Comparison between analog and digital locking MPPT unit for micro-scale PV Energy Harvesting systems
527
Comparison Between Analog and Digital Neural Network Implementations for Range-Finding Applications
528
Comparison between Analog and Digital Time and Frequency Measurement Techniques
529
Comparison between Analog Joint Source-Channel Coded and Digital BICM Systems
530
Comparison between analytical and numerical methods of calculating tooth ripple losses in salient pole synchronous machines
531
Comparison between analytical and numerical simulations of LF shielding efficiency
532
Comparison between analytical models and finite-difference simulations in transmission-line tap resistors and L-type cross-Kelvin resistors
533
Comparison between android and iOS Operating System in terms of security
534
Comparison between ANN and Decision Tree in Aerology Event Prediction
535
Comparison between ANSYS and CATIA Simulation Capability in Simulating Round Shape Diaphragm of MEMS Piezoresistive Pressure Sensor
536
Comparison between AODV and DSDV routing protocols in mobile Ad-hoc Network (MANET)
537
Comparison between AON and AOA network diagrams
538
Comparison between approximate and accurate calculation of line voltage THD in multilevel inverters with unequal DC sources
539
Comparison between approximate and accurate line voltage THD, case II: Multilevel inverter with equal DC sources
540
Comparison between ARIMA and ANN Models Used in Short-Term Wind Speed Forecasting
541
Comparison Between Arrays of Rotating Linearly Polarized Elements and Circularly Polarized Elements
542
Comparison between Artificial Neural Network and neuro-fuzzy for gold price prediction
543
Comparison between as-built data and field measurements of PMD in OPGW cabled fibres
544
Comparison between a-Si:H prepared by magnetron sputtering and e-beam plasma assisted vacuum evaporation
545
Comparison between asymmetric generalized Gaussian (AGG) and symmetric-α-stable (SαS) noise models for signal estimation in non Gaussian environments
546
Comparison between asymptotic and non asymptotic identification techniques of a first-order plus time delay model from step response
547
Comparison between asymptotic Bayesian approach and Kalman filter-based technique for 3D reconstruction using an image sequence
548
Comparison between attenuation coefficient computed on the ultrasound image and a biological marker, adiponectin, in the diagnosis of steatosis in non-alcoholic fatty liver disease
549
Comparison between AVHRR real time and ERS-2 SAR near real time data in an oceanographic cruise in the western Mediterranean
550
Comparison between AVI and MPEG compression of echocardiographic sequences
551
Comparison between backpropagation and revised GMDH techniques for predicting voltage harmonics
552
Comparison between backpropagation and RPROP algorithms applied to fault classification in transmission lines
553
Comparison between back-to-back and matrix converter drives under faulty conditions
554
Comparison between back-to-back and matrix converters based on thermal stress of the switches
555
Comparison between balanced truncation and modal truncation techniques for linear state-space symmetric systems
556
Comparison between bandgaps and bandwidths of back radiation of different narrow soft ground planes
557
Comparison between BAW and SAW sensor principles
558
Comparison between BAW and SAW sensor principles
559
Comparison between Bayesian Method and LSE in Estimating MTBF of NC Machine Tools
560
Comparison between BECN-capable TCP new-Reno and TCP Vegas
561
Comparison Between BEM and Classical FEM for a 3D Low-Frequency Eddy-Current Analysis
562
Comparison between beryllium-copper and tungsten high frequency air coplanar probes
563
Comparison between beryllium-copper and tungsten high frequency air coplanar probes
564
Comparison between biased and floating guard rings used as junction termination technique
565
Comparison between Binary64 and Decimal64 Floating-Point Numbers
566
Comparison between bipolar and NMOS transistors in linearization technique at 5GHz low noise amplifier
567
Comparison between blind separation and adaptive noise cancellation tecmiuques for fetal electrocardiogram extraction
568
Comparison between block-based and pixel-based temporal interpolation for video coding
569
Comparison between blur transfer and blur re-generation in depth image based rendering
570
Comparison between body fat measurements obtained by portable ultrasound and caliper in young adults
571
Comparison between boost and buckboost implemented PFC inverter with build-in soft switching and a unified controller
572
Comparison Between Bulk and FDSOI POM Flash Cell: A Multiscale Simulation Study
573
Comparison between bulk and SOI MOSFETs for sub-100nm mixed mode applications
574
Comparison between Californian and cyclotron SEU tests
575
Comparison between carried-induced optical index, loss variations and carrier lifetime in GaInAsP/InP heterostructures for 1.55 μm DOS application
576
Comparison between cascade and parallel switched capacitor structures
577
Comparison between CCM single-stage and two-stage boost PFC converters
578
Comparison between CDMA and COFDM transmission techniques for the digital audio broadcasting by satellite
579
Comparison between centralized and decentralized storage energy management for Direct Wave Energy Converter Farm
580
Comparison between centralized planning model and market oriented planning model for the generation expansion plan
581
Comparison between CFD simulations and experiments for predicting the far wake of horizontal axis tidal turbines
582
Comparison between characteristics of EEG signal generated from dyslexic and normal children
583
Comparison between characterization and diagnosis of broken bars/end-ring connectors and airgap eccentricities of induction motors in ASDs using a coupled finite element-state space method
584
Comparison between Chebyshev and power series expansion functions for interpolating data
585
Comparison between chua-yang and hyperbolic CNNs
586
Comparison between CIGS and triple junction GaAS on thin GE solar cell assemblies and related development strategies
587
Comparison between CIMS and CIPS
588
Comparison between circular and square coils for use in Wireless Power Transmission
589
Comparison between circular array and linear array microstrip antenna
590
Comparison Between Classic and Space Vector Models of the Induction Motor during Start Up at Industrial Frequency
591
Comparison between classical and fuzzy-controller for electrohydraulic axes
592
Comparison between classical and intelligent DTC strategies for induction machine
593
Comparison between classified result of paddy field and statistic data of the production
594
Comparison between clinical and instrumental assessing using Wii Fit system on balance control
595
Comparison between closed-loop and partial open-loop feedback control policies in long term hydrothermal scheduling
596
Comparison between Closed-Loop and Partial Open-Loop Feedback Control Policies in Long-Term Hydrothermal Scheduling
597
Comparison between Cloud Sim and Green Cloud in Measuring Energy Consumption in a Cloud Environment
598
Comparison between coasting and bunched beams on optimum stochastic cooling and signal suppression
599
Comparison between coherent superposition in DSP and PSA for mitigation of nonlinearities in a single-span link
600
Comparison between Collaborative Business Process tools
601
Comparison between colour models in automatic identification of cane sugar
602
Comparison Between Communication Infrastructures of Centralized and Decentralized Wide Area Measurement Systems
603
Comparison between complete and simplified methods for determining the microwave noise parameters of HEMTs
604
Comparison between computed and measured bandwidth of quarter-wave microstrip radiators
605
Comparison between concentrated and distributed winding in IPMSM for traction application
606
Comparison between constrained energy minimization based approaches for hyperspectral imagery
607
Comparison between continuous and discrete-time model truncation
608
Comparison between continuous review inventory control systems for perishables with deterministic lifetime and lead time
609
Comparison between continuous-time asynchronous and discrete-time synchronous iterative decoding
610
Comparison between continuous-wave and pulsed photorefraction in barium titanate
611
Comparison between control networks used in modern Supervision and Control Systems of research reactors
612
Comparison Between Controllers of Polynomial Fuzzy Control System
613
Comparison between conventional and fuzzy logic controller-based AVC relay for voltage control application of distribution networks
614
Comparison between conventional and nanofilled enamels under different environmental conditions
615
Comparison between conventional and stochastic pinning control
616
Comparison between conventional lenses and an electrically thin lens made using a phase shifting surface (PSS) at Ka Band
617
Comparison between conventional PID and Fuzzy PID supervisor for 3-DOF Scara type robot manipulator
618
Comparison between conventional railgun and two-turn railgun by 3D- FEM
619
Comparison between conventional, GA and PSO with respect to optimal capacitor placement in agricultural distribution system
620
Comparison between conventional, vacuum and microwave sintering of Cu-Cr-4 wt.% SiC nanocomposites
621
Comparison between Convolutional and LDPC Code-based Turbo Frequency Domain Equalization
622
Comparison between co-occurrence and wavelet features for characterization of urban environments by SAR data
623
Comparison between CRLH zeroth-order antenna and series-fed microstrip patch array antenna
624
Comparison between cross-correlation and auto-correlation technique in color flow imaging
625
Comparison between cross-correlation and optical flow methods for patient motion detection in SPECT
626
Comparison between cross-track and conical scanning microwave window channels near 90 GHz
627
Comparison between CTIA hand phantom and different human hands for OTA power measurements
628
Comparison between current fields detected with infrared radiometry and modeled currents around Sweden
629
Comparison between current-driven resonant converters used for single-stage isolated power-factor correction
630
Comparison between CVD and thermal oxide dielectric integrity
631
Comparison between damping coefficients of measured perforated structures and compact models
632
Comparison between DB control and Dual-Loop PR control for collapsed H-bridge single-phase 400Hz power supply
633
Comparison between DC and AC microgrid systems considering ratio of DC load
634
Comparison between Decision Tree and Genetic Programming to distinguish healthy from stroke postural sway patterns
635
Comparison between decision-level and feature-level fusion of acoustic and linguistic features for spontaneous emotion recognition
636
Comparison between deferent methods for evaluating the anisotropy field distribution in recording systems
637
Comparison between demand response programs in multiple carrier energy infrastructures in presence of wind and energy storage technologies
638
Comparison between detailed and simplified AC exciter models
639
Comparison between deteriorated region, precursor of electrical tree, and water treed region
640
Comparison between DFT- and DWT-based speech/non-speech detection for adverse environments
641
Comparison between DFT, adpative window DFT and EDFT for power quality frequency spectrum analysis
642
Comparison between DFT-, FCT-, Wavelet-, and Lattice Filter-Based Noise Reduction for ASR
643
Comparison between die attach film (DAF) and film over wire (FOW) on stack-die CSP application
644
Comparison between difference-frequency generation and parametric fluorescence in quasi-phase-matched lithium niobate stripe waveguides
645
Comparison between different adaptive pre-equalization approaches for wireless LAN
646
Comparison between different approaches for fast and efficient 3-D BEM computations
647
Comparison between different architectures of an electrolyte-gated Organic Thin-Film Transistor fabricated on flexible Kapton substrates
648
Comparison between different configurations of hybrid Raman/erbium-doped fiber amplifiers
649
Comparison between different control methods of a solar energy conversion system
650
Comparison Between Different Criteria for Evaluating Reverberation Chamber Functioning Using a 3-D FDTD Algorithm
651
Comparison between different data buses configurations
652
Comparison between different decoder algorithms for quasi orthogonal space time codes
653
Comparison Between Different Design Topologies for Multi-Megawatt Direct Drive Wind Generators Using Improved Second Generation High Temperature Superconductors
654
Comparison between Different Discharge Lamp Models Based on Lamp Dynamic Conductance
655
Comparison Between Different Discharge Lamp Models Based on Lamp Dynamic Conductance
656
Comparison between different displacement autopilots of A-3
657
Comparison Between Different Doppler Centroid Estimation Methods For Spaceborne S.A.R. Processing
658
Comparison Between Different Electric Signal Fire Resistant Cables Behaviour During Fire Tests
659
Comparison between different finite element/boundary formulations for modeling acoustic radiation in fluids
660
Comparison between different formulations for the solution of 3D nonlinear magnetostatic problems using BEM-FEM coupling
661
Comparison between different fusion approaches for train-borne location systems
662
Comparison between different HOS-based tests for detection of ship-radiated signals in non-Gaussian noise
663
Comparison Between Different Intermetallic Dielectric Processes and Consequences on Field Transistor Behaviour
664
Comparison between different inversion methods for ocean acoustic tomography (comparison on experimental data)
665
Comparison Between Different Learning Rates in a Car Safety Controller
666
Comparison between different lifting scheme algorithms
667
Comparison between different method to obtain the solution for differential equations of half bridge inverter
668
Comparison between different methods for developing neural network topology applied to a complex polymerization process
669
Comparison between different methods for evaluating the anisotropy field distribution in recording systems
670
Comparison between different methods for parametric image estimation in analyzer-based phase contrast images
671
Comparison between different methods of determining anisotropy constants of thin film media
672
Comparison between different methods of islanding detection for photovoltaic symmetric systems
673
Comparison between different model of hexapod robot in fault-tolerant gait
674
Comparison between different models during short circuit interruption test of circuit breaker
675
Comparison between different multi-objective approaches to distribution network planning
676
Comparison between different neural network architectures for odour discrimination
677
Comparison between different procedures of reliability analysis for emergency and stand-by power systems
678
Comparison between different PWM control methods for different Z-source inverter topologies
679
Comparison between different real-time harmonic analysis methods for control of electrical machines
680
Comparison between different rectangular horn elements for array antenna applications
681
Comparison between different rectangular horn elements for array antenna applications
682
Comparison between different similarity measure functions for optimal clustering AEPs Independent Components
683
Comparison between different soft decoding algorithms
684
Comparison Between Different Sound Source Localization Techniques Based on a Real Data Collection
685
Comparison between different techniques of controlling the temperature inside a resistive oven
686
Comparison between different types of EHV and UHV transmission system taking account of their forced outages
687
Comparison between different types of green´s function factorization for the BMIA/AIM method
688
Comparison between different wavelet transforms and thresholding techniques for ECG denoising
689
Comparison between different ways to calculate the induced no-load voltage of PM synchronous motors using finite element methods
690
Comparison between differential evolution and particle swarm optimization algorithms
691
Comparison between digital and analog predistortion for satellite communications
692
Comparison between digital and analog pulse shape discrimination techniques for neutron and gamma ray separation
693
Comparison between digital and paper note-taking based on NASA-TLX
694
Comparison between digital average current mode control and digital one cycle control for a bridgeless PFC boost converter
695
Comparison between digital phase recovery techniques in the presence of a frequency shift
696
Comparison between dilute nitrides grown on {111} and [100] GaAs substrates: N incorporation and quantum well optical properties
697
Comparison between direct and vector control strategy for VSC-HVDC system in EMTP-RV
698
Comparison between direct torque control and vector control of a permanent magnet synchronous motor drive
699
Comparison between discharge patterns in solid and liquid insulating materials
700
Comparison between dispersion management for long-haul WDM systems using all-Raman-amplifier repeaters
701
Comparison between DMRT simulations for multilayer snowpack and data from NoSREx report
702
Comparison between document-based, term-based and hybrid partitioning
703
Comparison between Double Conversion Online UPS and Flywheel UPS technologies in terms of efficiency and cost in a medium Data Centre
704
Comparison between DPCA Algorithm and Inertial Navigation on the Ixsea Shadows SAS
705
Comparison Between DPCM and Hadamard Transform Coding in the Composite Coding of the NTSC Color TV Signal
706
Comparison Between Drift-diffusion Model And Hydrodynamic Model For Sub-micron Mosfets
707
Comparison between DS-CDMA and modified Gegenbauer functions for a multiuser communication ultra-wideband system
708
Comparison between DTC using a two-level inverters and DTC using a three level inverters of induction motor
709
Comparison Between Dual-Permanent-Magnet-Excited Machines With Fewer Stator Poles and Fewer Rotor Poles
710
Comparison between DVR and SFCL for fault ride through capability improvement of fixed-speed wind generator
711
Comparison between edge diffraction processes
712
Comparison between EEMD, wavelet and FIR denoising: Influence on event detection in impedance cardiography
713
Comparison between effect of coupled and independent electricity and gas infrastructures on electric power networks
714
Comparison between Effective Features Used for the Bayesian and the SVM Classifiers in BCI
715
Comparison Between Eigenface Epace and Wavelet Technique as Methods of Face Recognition
716
Comparison between eigenfaces and Fisherfaces for estimating driver pose
717
Comparison between eigenvalue fusion and decision fusion for spectrum sensing of OFDMA signals under errors in the control channel
718
Comparison between electrical and pressure measurements to detect PEM fuel cell flooding
719
Comparison between electromagnetic And electromechanical transient simulation for large-scale multi-infeed DC system
720
Comparison between electromagnetic and thermal stress induced by Direct Current flow in IGBT bond wires
721
Comparison between Electromagnetic Models and Magnetic Measurements in the LHC Magnets
722
Comparison between electromagnetic scattering by a rain induced sea surface roughness and field data
723
Comparison between elimination yield non pre-emptive priority multiple access (EY-NPMA) and dynamic TDMA (D-TDMA)
724
Comparison between embedding on edges in spatial and frequency domains
725
Comparison between emotional and objective views to promote understanding of risks for elderly drivers
726
Comparison between empirical lognormal and gamma rain drop-size distribution models for Indian region
727
Comparison Between Empirical or Functional Sinks of Organs - Application on Tomato Plant
728
Comparison between ENA and ENEPIG surface finish for high density TBGA package
729
Comparison Between Energetic and Nonenergetic Coherent Digital Receivers
730
Comparison between entropy net and decision tree classifiers
731
Comparison Between Envisat SAR and 3-D Laser Scanner Statistics for the Baltic Sea Ice
732
Comparison between EOG and high frame rate camera for drowsiness detection
733
Comparison between epi-down and epi-up bonded high-power single-mode 980-nm semiconductor lasers
734
Comparison between equivalent-circuit and black-box non-linear models for microwave electron devices
735
Comparison between erbium-doped fluoride and silica fiber amplifiers in an AM-CATV transmission system
736
Comparison between ESPRIT Algorithm and Three-Stage Algorithm for PolinSAR
737
Comparison between ETM+ imageries and ICESat-GLAS waveforms for forest classification
738
Comparison between Euler, Heun, Runge-Kutta and Adams-Bashforth-Moulton integration methods in the particle dynamic simulation
739
Comparison between evolutionary programming and a genetic algorithm for fault-section estimation
740
Comparison Between Exact and Quasi-Static Methods for HF Analysis of Horizontal Buried Wires
741
Comparison between experiment and 3-dimentional electromagnetic simulation of monolithic radial transmission lines for Z-pinch
742
Comparison between experiment and computer modeling for simple MILO configurations
743
Comparison between experiment and computer modelling for simple MILO configurations
744
Comparison between Experiment and Process Simulation Results for Converting Enhancement to Depletion Mode NMOS Transistor
745
Comparison between experimental and computer modelling results for a pneumatic/hydraulic hybrid cylinder
746
Comparison between experimental and numerical results of electromagnetic scattering from lossy dielectric objects
747
Comparison Between Experimental and Numerical Studies of a Reflex Triode
748
Comparison Between Experimental and Simulation Results for Ion Beam and Neutron Irradiations in Silicon Bipolar Junction Transistors
749
Comparison between Experimental Measurement and Numerical Analysis of Warpage in PBGA Package and Assembly with the Consideration of Residual Strain in the Molding Compound
750
Comparison between experimental results and CFD simulations for air flows in a thin electronics casing model
751
Comparison between experimental results and fractal growth model for electrical treeing in polyethylene
752
Comparison between experimental XANES spectra and electronic structure calculations in the filled skutterudites CeyFe4-xNixSb12
753
Comparison between explicit and implicit discrete-time implementations of sliding-mode controllers
754
Comparison between extension of the European EGNOS and new African ASAS network for Africa and Middle East
755
Comparison between failure detection test signals for continuous systems and sampled-data systems
756
Comparison between Farmer Household Tourism Wastewater and Municipal Wastewater Based on 3DEEM Fluorescence Spectroscopy
757
Comparison between fast direct methods for transient stability assessment
758
Comparison between fast neutron and gamma irradiation of optical fibres
759
Comparison between fast neutron and gamma irradiation of optical fibres
760
Comparison Between Fast Steady-State Analysis Methods for Time-Periodic Nonlinear Magnetic Field Problems
761
Comparison between FDD and TDD frame structure in SC-FDMA
762
Comparison between FDTD and UTD for the two dimensional case of a lossy dielectric wedge
763
Comparison between FDTD graded grids
764
Comparison Between Features and Performance Characteristics of Fifteen HP Samarium Cobalt and Ferrite Based Brushless DC Motors Operated by Same Power Conditioner
765
Comparison Between Features and Performance Characteristics of Fifteen HP Samarium Cobalt and Ferrite Based Brushless DC Motors Operated by Same Power Conditioner
766
Comparison between Fertilization N, P, K and No Fertilization N, P, K in Paddy Soil by Laser Induced Breakdown Spectroscopy
767
Comparison between file carving from disk drive and disk image in open source environment
768
Comparison between fingerprint and winnowing algorithm to detect plagiarism fraud on Bahasa Indonesia documents
769
Comparison between finite element and integral equation modelling of power busbar systems
770
Comparison between finite-difference time-domain calculation with all parameters of Sellmeier´s fitting equation and experimental results for slightly chirped 12-fs laser pulse propagation in a silica fiber
771
Comparison Between Finite-Element Analysis and Winding Function Theory for Inductances and Torque Calculation of a Synchronous Reluctance Machine
772
Comparison between finite-element and analytical calculations for the lifetime estimation of bond wires in IGBT modules
773
Comparison between first and second order prediction for on-line configuration control of redundant manipulator based on AMSIP
774
Comparison between first-order and second-order optical phase-lock loops
775
Comparison between first-order digital and analogue phase-locked loops
776
Comparison between first-order hold with zero-order hold in discretization of input-delay nonlinear systems
777
Comparison between fixed and solar oriented PV modules´ energy production using a simplified PSIM model
778
Comparison between flat spiral and serpentine differential delay lines on TDR and TDT
779
Comparison between FLC and PID Controller for 5DOF robot arm
780
Comparison between flux weakening and PWM inverter with voltage booster for permanent magnet synchronous motor drive
781
Comparison between foF2 observations and IRI-2001 model predictions at Thailand equatorial latitude station
782
Comparison between FPGA-Based and dsPIC-Based islanding detection for grid connected inverter in a photovoltaic system
783
Comparison between fractional order PI controller and SIMC PI controller
784
Comparison between free space and in-waveguide power measurement standards at 94 GHz
785
Comparison between frequency splitting approach and fuzzy logic control as an energy control strategy in hybrid vehicles
786
Comparison between fresh and fixed human biopsies using spectral and lifetime measurements: Fluorescence analysis using one and two photon excitations
787
Comparison between front- and back-gating of Silicon Nanoribbons in real-time sensing experiments
788
Comparison between FS-MPC control strategy for an UPS inverter application in α-β and abc frames
789
Comparison between full-bridge-forward converter and DAB converter
790
Comparison between fully- and partially-depleted SOI MOSFET´s for low-power radio-frequency applications
791
Comparison between fundamental and harmonic power generation of GaAs Gunn devices at 94 GHz
792
Comparison between Fuzzy and Interval Partitions in Evolutionary Multiobjective Design of Rule-Based Classification Systems
793
Comparison between fuzzy and NN method for speech emotion recognition
794
Comparison between Fuzzy C-means clustering and Fuzzy Clustering Subtractive in urban air pollution
795
Comparison between fuzzy logic and sliding mode control applied to six phase induction machine positioning
796
Comparison between fuzzy logic based controllers for robot manipulator trajectory tracking
797
Comparison between fuzzy, neural and neuro-fuzzy controllers for mobile robot path tracking
798
Comparison between gas- and air insulated network concepts with the life cycle cost method
799
Comparison between gate oxide degradation induced by copper dual damascene and conventional aluminum processes
800
Comparison between gate oxide lifetime models with Rseries and trapping effect correction in the FN-regime
801
Comparison between Ge and InGaAs APDs in the 1 to 2 μm wavelength range
802
Comparison between Geant4 and EGSnrc of dosimetric quantities and spectra simulation for electrons beam
803
Comparison between general cross correlation and a template-matching scheme in the application of acoustic gunshot detection
804
Comparison between genetic and gradient-based optimization algorithms for solving electromagnetics problems
805
Comparison between Genetic Network Programming (GNP) and Genetic Programming (GP)
806
Comparison between Genetic Programming and full model selection on classification problems
807
Comparison between genetic programming and Neural Network in classification of buried unexploded ordnance (UXO) targets
808
Comparison Between Geometrical Theory of Diffraction and Electromagnetic Theory for the Study of the Near Field of a Circular Aperture
809
Comparison between geometry-based and Gabor-wavelets-based facial expression recognition using multi-layer perceptron
810
Comparison between GLCM and modified Zernike moments for material surfaces identification from photo images
811
Comparison between global rice paddy field mapping and methane flux data from GOSAT
812
Comparison between GMM and KDE data fusion methods for particle filtering: Application to pedestrian detection from laser and video measurements
813
Comparison between GMSK and PSK modulation systems in the wireless propagation channels emulated in a Reverberating Chamber
814
Comparison Between GOES-East and -West for Land Surface Temperature Retrieval From a Dual-Window Algorithm
815
Comparison between gold nanoparticles and conductive polymer nanoparticles used in photothermal therapy
816
Comparison between grey system and ARIMA model in groundwater simulation — A case study of Liulin Springs discharge simulation
817
Comparison between ground tests and flight data for two static 32 KB memories
818
Comparison between GSM-R coverage level and EM noise level in railway environment
819
Comparison between GTEM and OATS radiated emission measurements for different product families
820
Comparison between GTEM and OATS radiated field emission measurements
821
Comparison between GVF snake and ED snake in segmenting microcalcifications
822
Comparison Between H.264/AVC and JPEG2000 Arithmetic Encoders
823
Comparison between H.264/AVC and Motion jpeg2000 for super-high definition video coding
824
Comparison between H.264/AVC intra transrating schemes based on frequency position and frequency level selectivity
825
Comparison between H2 and H∞ controllers
826
Comparison between HDM and PCA in teeth image recognition
827
Comparison between HDP CVD and PECVD silicon nitride for advanced interconnect applications
828
Comparison between He/O2 and He/H2O atmospheric pressure cold plasmas
829
Comparison between head losses of 20 phones with external and built-in antennas measured in reverberation chamber
830
Comparison between headspace and vacuum gas extraction techniques for the gas chromatographic determination of dissolved gases from transformer insulating oils
831
Comparison between Heavy Ion and Pulsed Laser Simulation to reproduce SEE Tests
832
Comparison between heterogeneous ant colony optimization algorithm and Genetic Algorithm for global path planning of mobile robot
833
Comparison between hexa- and conventional E-type core three-phase transformers
834
Comparison between hierarchical distributed evolutionary algorithms and general distributed evolutionary algorithms
835
Comparison Between High Altitude EMP and High Power Electromagnetic Effects on Equipment and Systems
836
Comparison between high impedance and low impedance bus differential protection
837
Comparison between high impedance and low impedance bus differential protection
838
Comparison between high-T/sub c/ superconducting microstrip filters and normal conducting counterparts
839
Comparison between Hilbert space based power theory and Traditional power theory
840
Comparison between Hot-Carrier Drift and Radiation Damage in MOS Devices
841
Comparison between human supervisory control and hierarchical control system based on human´s knowledge in petroleum plant
842
Comparison between hybrid feedforward-feedback, feedforward, and feedback structures for active noise control of fMRI noise
843
Comparison between hybrid genetic-SPSA algorithm and GA for solving random fuzzy dependent-chance programming
844
Comparison between hybrid Weibull and MEP methods for calculating wind speed distribution
845
Comparison between ICA and wavelet-based denoising of single-trial evoked potentials
846
Comparison between IEEE and CIGRE ampacity standards
847
Comparison between IFDI schemes based on expert systems and neural networks
848
Comparison between IFDI schemes based on expert systems and neural networks
849
Comparison between image codecs: JPEG and JPEG2000
850
Comparison between immersion-based and toboggan-based watershed image segmentation
851
Comparison between impedance method and FDM algorithms for leak detection in urban waterworks
852
Comparison between implanted boron and phosphorus in silicon wafers.
853
Comparison between incoherent and coherent measurements
854
Comparison between inductance topologies for resonant wireless power transmission applications
855
Comparison between induction and PM machine for high speed starter-generator applications
856
Comparison between induction machine and interior permanent magnet machine for electric vehicle application
857
Comparison Between Influence Of The Conduction Velocity And the Refractory Period Variations On The Reentry Mechanism
858
Comparison Between Infrared and Electrical Nerve Stimualtion
859
Comparison between infrared-image-based and visible-image-based approaches for pedestrian detection
860
Comparison between initial skew rate and moment based method for the printed text skew estimation
861
Comparison between innovative approaches of RFID based localization using fingerprinting techniques for outdoor and indoor environments
862
Comparison between InP and other semiconductor, materials for the realization of millimeter wave two terminal devices
863
Comparison between InSAR and leveling
864
Comparison between insulating properties of transformer oil and a low-flammability ester Midel 7131
865
Comparison between INT and TTC assay to determine the dehydrogenase activity of flocs
866
Comparison between integer order and fractional order controllers
867
Comparison between integrated and non-integrated SEPIC half-bridge electronic ballasts for electrodeless fluorescent lamp applications
868
Comparison between integrated and simplified ZVT topologies for three-phase voltage-source inverters
869
Comparison between interactive (subjective) and traditional (numerical) inversion by genetic algorithms
870
Comparison between interleaving and multiple DMT symbols per RS codeword in ADSL systems
871
Comparison between interval type-2 fuzzy sets based on a fuzzy preference relation with probability degree
872
Comparison between intrinsic and integrated reliability properties of low-k materials
873
Comparison between intrinsic time-scale decomposition and Hilbert-Huang transform
874
Comparison between inverse modelling and data assimilation to estimate rainfall from runoff using the multilayer perceptron
875
Comparison between inverter and differential amplifier as 0.35μm ring oscillator vehicle
876
Comparison between isolated SCR & embedded dual isolated SCR power devices for ESD power clamp in C45nm CMOS technology
877
Comparison between ITU-T Recs G.826×G.821: a concrete case in Brazil
878
Comparison between JPEG2000 and H.264 for digital cinema
879
Comparison between JSON and XML in Applications Based on AJAX
880
Comparison between K mean and fuzzy C-mean methods for segmentation of near infrared fluorescent image for diagnosing prostate cancer
881
Comparison between KAPTON polyimide insulation layers and nylon plates in superconducting tapes winding
882
Comparison between Keller´s and Ufimtsev´s theories for the strip
883
Comparison between K-Mean and C-Mean Clustering for CBIR
884
Comparison between k-Nearest neighbors, self-organizing maps and optimum-path forest in the recognition of packages using image analysis by Zernike moments
885
Comparison between known adaptive algorithms for Pre-FFT beamforming in OFDMA systems
886
Comparison between Ku-band classical and cross-coupled microstrip hairpin filters
887
Comparison between laser cooled and thermal Mg atoms for a future optical frequency standard
888
Comparison between lasers isolated by oxygen implantation and SiO2isolated stripe lasers
889
Comparison between latency insertion method (LIM) and relaxation method in thermal integrity analysis
890
Comparison between LDPC codes and QC-LDPC codes in term of PAPR in OFDM system with different encoding techniques
891
Comparison between least square & Newton Raphson for estimation parameters of an autonomous threaded fastenings
892
Comparison between least squares path loss estimation and averaging for handover algorithms
893
Comparison between Legendre moments and DCT in ECG compression
894
Comparison between Levenberg-Marquardt and Scaled Conjugate Gradient training algorithms for Breast Cancer Diagnosis using MLP
895
Comparison between Lewis and Crine models for the electrical aging of dielectric polymers
896
Comparison between Linear Discriminant Analysis and Singular Value Decomposition for PD gait classification
897
Comparison between linear FM and phase-coded CW radars
898
Comparison between low and high read bias in FB-RAM on UTBOX FDSOI devices
899
Comparison between LS and TLS in adaptive processing for radar systems
900
Comparison between LS and TLS in adaptive processing for radar systems
901
Comparison between LTE and WiMAX based on system level simulation using OPNET modeler (release 16)
902
Comparison between magneto-optic and vsm measurement of bias-sputtered CoCr films with perpendicular anisotropy
903
Comparison between magneto-optic and VSM measurements of bias-sputtered CoCr films with perpendicular anisotropy
904
Comparison between Mamdani and Sugeno fuzzy inference systems for the mitigation of environmental temperature variations in OCDMA-PONs
905
Comparison between man and machine in the case of acute coronary syndrome and acute myocardial infarction detection in a chest pain cohort in the emergency department
906
Comparison between Manual and Semi-automatic Segmentation of Nasal Cavity and Paranasal Sinuses from CT Images
907
Comparison Between Manually and Automatically Assigned Descriptors Based on a German Bibliographic Collection
908
Comparison between MAP and postprocessed ML for image reconstruction in emission tomography when anatomical knowledge is available
909
Comparison between MAP and post-processed ML for incorporating anatomical knowledge in emission tomography
910
Comparison between MARSIS & SHARAD results
911
Comparison between Mason´s equivalent circuit and complex series dynamics from energetic point of view
912
Comparison between matching parameters and fluctuations at the wafer level
913
Comparison between Matrix Pencil and Prony methods applied on noisy antenna responses
914
Comparison Between Maxwell–Schrödinger and Maxwell–Newton Hybrid Simulations for Multi-Well Electrostatic Potential
915
Comparison between MBE-based SiGe/Si HBT and Si-based bipolar transistor technologies
916
Comparison between MC-CDMA, and the Spreading and Modulation of cdma2000
917
Comparison between measured and computed values of the mean mutual information per coded bits in OFDM based wireless transmissions
918
Comparison between measured and simulated features of current collection by the tethered satellite
919
Comparison between measured and theoretical nonlinear behaviour of 4-cavity klystrons
920
Comparison between Measurement and Calculation of Line Switching with Inductive and Complex Source-Modeling Requirements
921
Comparison between measurement and calculation of line switching with inductive and complex source-modelling requirements
922
Comparison between measurement and prediction propagation model for PCT system
923
Comparison between measurement and simulation for an outdoor-indoor scenario in WiMAX system
924
Comparison between measurement and simulation of monostatic and bistatic sea clutter
925
Comparison Between Measurements and Simulations of Conventional and Distributed MIMO System
926
Comparison between mechanical circuit breaker and solid state circuit breaker under abnormal conditions for low voltage systems
927
Comparison between median filtering and vertical edge controlled interpolation for flicker reduction
928
Comparison between mesa isolation and p+ implantation isolation for 4H-SiC MESFET transistors
929
Comparison between metal wire grid and plasma wire grid
930
Comparison between metallic carbon nanotube and copper future VLSI nano-interconnects
931
Comparison between micro-objects manipulations in dry and liquid mediums
932
Comparison between microsphere-assisted and confocal microscopies
933
Comparison between microstrip and wire antenna
934
Comparison Between Microwave Emissivity And Backscattering Coefficient Of Agricultural Fields
935
Comparison between Miller integrator cells using VOAs and CFOAs
936
Comparison between millimeter wave interferometry and Langmuir probe measurements in low pressure discharges
937
Comparison between MIMO techniques in UMTS-HSDPA system
938
Comparison between Minimum Classification Error training and Relevance Vector Machine
939
Comparison between mixed binary classification and voting technique for active user authentication using mouse dynamics
940
Comparison between ML-EM and WLS-CG algorithms for SPECT image reconstruction
941
Comparison Between ML-EM And WLS-CG Algorithms For Spect Image Reconstruction
942
Comparison between MLP and RBF network in improving CHEMFET sensor selectivity
943
Comparison between MMIC matrix and distributed amplifiers
944
Comparison between model based controllers for a distributed solar collector field
945
Comparison between model reference observer and reduced order observer of PMSM torque
946
Comparison Between Modeling Methods of 2-D Magnetic Properties in Magnetic Field Analysis of Synchronous Machines
947
Comparison between models for eddy-current loss calculations in rotor surface-mounted permanent magnets
948
Comparison between modifications of SFOC and DPC in control of grid-connected Doubly Fed Induction Generator under Unbalanced Voltage Dip
949
Comparison between monocycle and two-cycle pumpings for the high-order harmonic attosecond-pulse generation
950
Comparison Between Monopolar and Bipolar Microsecond Range Pulsed Electric Fields in Enhancement of Apple Juice Extraction
951
Comparison between monopolar and tripolar configurations in chronically implanted nerve cuff electrodes
952
Comparison between monostatic and bistatic antenna configurations for STAP
953
Comparison between monostatic and bistatic SAR image based on spatial spectrum analysis
954
Comparison between monovariable controller and multivariable controller [canal reaches level control]
955
Comparison between MOS and bipolar mm-wave power amplifiers in advanced SiGe technologies
956
Comparison between MPSO and MSFLA metaheuristics for MR brain image segmentation
957
Comparison Between MRLS and MRAS Applied to a Speed Sensorless Induction Motor Drive
958
Comparison between multi-band and self-tuned fuzzy power system stabilizers
959
Comparison between multicode with fixed spreading and single code with variable spreading options in UTRA/TDD
960
Comparison between multiobjective GA and PSO for parameter optimization of AT2-FLC for a real application in FPGA
961
Comparison between multipath interference canceller and chip equalizer in HSDPA in multipath channel
962
Comparison Between Multiple Description and Single Description Video Coding With Forward Error Correction
963
Comparison between multiple description coding and forward error correction for scalable video coding with different burst lengths
964
Comparison between multiple quantum wells and carbon nanotubes to generate high power in mode-locked fiber oscillator
965
Comparison between multiple regression and multivariate adaptive regression splines for predicting CO2 emissions in ASEAN countries
966
Comparison between multiple scattering theories and velocity and attenuation measurements in highly loaded liquid media
967
Comparison between Multitemporal and Polarimetric SAR Data for Land Cover Classification
968
Comparison between multi-zone and multi-layer scheme for RAM design using GA
969
Comparison between Munich and Gammachirp models in audio compression
970
Comparison between MUSIC and ESPRIT direction of arrival estimation algorithms for wireless communication systems
971
Comparison between myoelectric signal mean and median frequency estimates
972
Comparison between MZI and single phase-modulator for generating 112-Gbit/s PDM-QPSK signal
973
Comparison between narrow-angle-band and wide-angle-band spatio-temporal FEM and FD BPM codes for the propagation of ultrashort optical pulses
974
Comparison between NARX parameter estimation methods with Binary Particle Swarm Optimization-based structure selection method
975
Comparison between Nd:YAG and Nd:YVO/sub 4/ as gain media for a single-frequency micro-laser
976
Comparison between Nearest Neighbours and Bayesian Network for demand forecasting in supply chain management
977
Comparison between near-floor and ceiling supply-air entry for GYM ventilation
978
Comparison between NEGF simulation and experimental results of Terahertz quantum cascade lasers
979
Comparison Between NEM and FEM in 2-D Magnetostatics Using an Error Estimator
980
Comparison between net emission coefficient and P-1 methods in modelling radiation in a plasma arc welding torch
981
Comparison between Neural Network based PI and PID controllers
982
Comparison between Neural Network Steganalysis and Linear Classification Method Stegdetect
983
Comparison Between Neural-Network-Based Adaptive Filtering and Wavelet Transform for ECG Characteristic Points Detection
984
Comparison Between Neural-Network-Based Adaptive Filtering and Wavelet Transform for ECG Characteristic Points Detection
985
Comparison Between Neural-Network-Based Adaptive Filtering and Wavelet Transform for ECG Characteristic Points Detection
986
Comparison between neutron-induced system-SER and accelerated-SER in SRAMS
987
Comparison between New Quantum Approaches for Finding the Minimum or the Maximum of an Unsorted Set of Integers
988
Comparison between nMOS pass transistor logic style vs. CMOS complementary cells
989
Comparison between noise reduction algorithms for speech signals using auditory masking effects
990
Comparison between nonconforming movement methods
991
Comparison between nonlinear and linear spectrographic techniques for the complete characterization of high bit-rate pulses used in optical communications
992
Comparison between nonlinear characteristics of n-channel and p-channel FD SOI MOSFETs
993
Comparison Between Nonlinear Filtering Techniques for Spiraling Ballistic Missile State Estimation
994
Comparison between nonlinear model-based controllers and gain-scheduling Internal Model Control based on identified model
995
Comparison between Nonlinear-Carrier Control and Average-Current-Mode Control for PFC Converters
996
Comparison between Nonnormal Process Capability Study Based on Two Kinds of Transformations
997
Comparison between Nonnormal Process Capability Study Based on Two Kinds of Transformations
998
Comparison between Non-stationary Signals Fast Fourier Transform and Wavelet Analysis
999
Comparison between norm constrained and robust Capon beamformers
1000
Comparison between normalizations for SVM — GMM supervectors speaker verification