<< مقالات لاتين فني مهندسي >>
<< بر اساس عنوان >>
1
Analysis of security vulnerabilities for web based application
2
Analysis of Security Vulnerabilities of Cloud Computing Environment Service Models and Its Main Characteristics
3
Analysis of sedimentary bottom impulse response using a wide band sonar
4
Analysis of SEE-Inducing Charge Generation in the Neutron Beam at The Svedberg Laboratory
5
Analysis of Segment Shilling Attack Against Trust Based Recommender Systems
6
Analysis of segmental cave-in Probability of Maojingba tunnel in Daqing-Guangzhou Expressway
7
Analysis of segmentation and tracking algorithms for time lapse microscopic progenitor cell images
8
Analysis of segmentation performance on the CEDAR benchmark database
9
Analysis of segmentation scheme for diseased rice leaves
10
Analysis of segmented reflector antennas for a large millimeter wave radio telescope
11
Analysis of segmented traveling-wave optical modulators
12
Analysis of Seismic Activity using the Growing SOM for the Identification of Time Dependent Patterns
13
Analysis of seismic behavior of a building from Turkey using real earthquake records
14
Analysis of seismic behaviour of concrete-filled rectangular steel tubular beam and column joints based on performance
15
Analysis of Seismic Effects on Transmission Structures
16
Analysis of Seismic Electromagnetic Phenomena Using the FDTD Method
17
Analysis of seismic performance for high-voltage Switchgear equipment of GIS
18
Analysis of seismic response of the long-span through CFST arch bridge
19
Analysis of seismocardiogram capability for prediction of mild to moderate haemorrhage; Preliminary results
20
Analysis of seismocardiogram capability for trending stroke volume changes: A lower body negative pressure study
21
Analysis of Selected Be-Substituted NiZn Ferrites
22
Analysis of selected constructions of the electrodynamic accelerator
23
Analysis of selected methods for CMOS integrated circuit design for yield optimization
24
Analysis of selected motor event and starting reports
25
Analysis of selected properties of measurement channels used in hazardous areas of ships
26
Analysis of selection combining for differentially detected π/4-DQPSK in Nakagami-m fading channels
27
Analysis of selection combining schemes on Rayleigh fading channels with noisy channel estimates
28
Analysis of selection diversity combiner in Rician fading channels with Class A impulse noise
29
Analysis of selection diversity for MPSK signals in Nakagami fading channels
30
Analysis of selection diversity on Nakagami fading channels
31
Analysis of Selection of Construction Project Transaction Mode Based on Fuzzy SMARTS Decision Model
32
Analysis of selective constraints on mitochondrial DNA, Flight ability and physiological index on avian
33
Analysis of Selective Parameters Contributing to Road Accidents on Highways for Establishing Suggestive Precautionary Strategies
34
Analysis of Selective Phosphorous Laser Doping in High-Efficiency Solar Cells
35
Analysis of Selective Retransmission Techniques for Differentially Encoded Data
36
Analysis of Selective-Repeat ARQ via Matrix Signal-Flow Graphs
37
Analysis of self broadband interference from power amplifier of communication platform
38
Analysis of self excited induction generator feeding induction motor
39
Analysis of self excited induction generator using MATLAB GUI methodology
40
Analysis of Self Interference in a Basic FBMC System
41
Analysis of self mixing of transmitter interference in WCDMA receivers
42
Analysis of self noise in a clock recovery systems with a high-order nonlinearity
43
Analysis of self-body blocking effects in millimeter wave cellular networks
44
Analysis of self-calibrated field aligned starting (FAS) at mains connection
45
Analysis of self-compensating DFIG for wind energy conversion systems
46
Analysis of self-dual excited synchronous machine. I. Development of the general mathematical model and steady-state performance experimental verification
47
Analysis of self-dual excited synchronous machine. II. Small perturbation model and dynamic behaviour
48
Analysis of self-evacuation to rescuing process under survivability-critical states in underground flooding by vitae system based agent modeling and simulation
49
Analysis of Self-Excitation in Turbine-Generators Induced by Static Blocking Filter
50
Analysis of self-excited electronic ballasts using BJTs/MOSFETs as switching devices
51
Analysis of self-excited induction generator by spiral vector theory
52
Analysis of self-excited induction generator feeding DC loads for low-cost renewable energy applications
53
Analysis of self-excited induction generators
54
Analysis of self-excited induction generators using an iterative method
55
Analysis of self-excited resonant DC-DC converter to determine oscillation condition
56
Analysis of self-force error in relativistic PIC simulations
57
Analysis of self-heating effect and breakdown characteristics in partial SOI LDMOS with multi silicon windows
58
Analysis of Self-Heating Effect on Short Channel Amorphous InGaZnO Thin-Film Transistors
59
Analysis of Self-Heating Effects in Ultrathin-Body SOI MOSFETs by Device Simulation
60
Analysis of self-heating effects on partially depleted silicon on aluminum nitride MOSFETs
61
Analysis of Self-Heating in Poly-Si Thin-Film Transistors and Circuits by a Self-Consistent Electro-Thermal Simulation Approach
62
Analysis of self-heating phenomenon in oxide thin-film transistors under pulsed bias voltage
63
Analysis of Self-Heating-Related Instability in Self-Aligned p-Channel Polycrystalline-Silicon Thin-Film Transistors
64
Analysis of Self-Het OFDM enhancements for 60GHz indoor RF channels
65
Analysis of self-noise in a clock recovery system with a high-order nonlinearity
66
Analysis of self-noise in a fourth-power clock regenerator
67
Analysis of self-noise in clock recovery using arbitrary nonlinearity
68
Analysis of Self-Organized Lightwave Network (SOLNET) for Nano Optical IC´s by FDTD
69
Analysis of self-oscillating DC-DC resonant power converters using a hysteretic relay
70
Analysis of self-oscillating switched-mode circuit for low-voltage energy harvesting
71
Analysis of self-powered vibration-based energy scavenging system
72
Analysis of Self-Pulsating Sources Based on Cascaded Regeneration and Soliton Self-Frequency Shifting
73
Analysis of Self-Pulsating Sources Based on Regenerative SPM: Ignition, Pulse Characteristics and Stability
74
Analysis of self-pulsating three-section DBR lasers
75
Analysis of self-reconfigurable modular systems: a design proposal for multi-modes locomotion
76
Analysis of self-regulated learning strategies oriented to the design of software support
77
Analysis of self-resonant frequency for differential-driven symmetric and single-ended inductors
78
Analysis of self-sensing active magnetic bearings working on inductance measurement principle
79
Analysis of self-similar data by artificial neural networks
80
Analysis of Self-Similar Traffic Based on the On/Off Model
81
Analysis of self-similar traffic parameters for network performance improvement with real-time discrete wavelet transform
82
Analysis of Self-Similar Workload on Real-Time Systems
83
Analysis of self-similarity in an Internet-based multiplayer online game
84
Analysis of self-similarity in I/O workload using structural modeling
85
Analysis of self-stabilization for infinite-state systems
86
Analysis of self-stabilizing clock synchronization by means of stochastic Petri nets
87
Analysis of self-tagging during conversational chat in multilingual gaming simulation
88
Analysis of SEM Images of Stomata of Different Tomato Cultivars Based on Morphological Features
89
Analysis of Semantic Heterogeneity Using a New Ontological Structure Based on Description Logics
90
Analysis of semantic query performance for jena-based storage model
91
Analysis of sEMG during voluntary movement-part II: voluntary response index sensitivity
92
Analysis of SEMG for Treadmill and Ground Walk of Healthy Individuals
93
Analysis of sEMG signals associated with isometric contraction of triceps brachii muscles using multifractals
94
Analysis of semi-anechoic chamber using ray-tracing technique
95
Analysis of semiconducting biomedium reaction for “capacitive” converter
96
Analysis of semiconductor diodes with multifrequency input signal
97
Analysis of semiconductor intersectional waveguide optical switch-modulator
98
Analysis of semiconductor laser arrays with high-intensity uniformity
99
Analysis of semiconductor laser frequency noise taking into account multiple reflections in the external cavity
100
Analysis of semiconductor laser optical amplifiers
101
Analysis of semiconductor microcavity lasers using rate equations
102
Analysis of semiconductor microlasers with an equilateral triangle resonator by rate equations
103
Analysis of semiconductor nanowire arrays for photovoltaics
104
Analysis of semiconductor nuclear radiation detectors with arbitrary electrode geometries
105
Analysis of semiconductor power losses in M-level NPC inverters
106
Analysis of semiconductor rib waveguides: spectral index method
107
Analysis of semiconductor sensor for detecting dissolved gases in power transformers
108
Analysis of semiconductors with field-dependent mobility
109
Analysis of semidefinite relaxation detector in MIMO channel
110
Analysis of Semipermeable Containment Sleeve Technology for High-Speed Permanent Magnet Machines
111
Analysis of SEND Protocol through Implementation and Simulation
112
Analysis of sense finger dynamics for accurate ΣΔ MEMS accelerometer modelling in VHDL-AMS
113
Analysis of sense margin and reliability of 1T-DRAM fabricated on thin-film UTBOX substrates
114
Analysis of Sensing Efficiency for Cooperative Spectrum Sensing With Malicious Users in Cognitive Radio Networks
115
Analysis of Sensing margin in Silicon-On-ONO (SOONO) Device for the Capacitor-less RAM Applications
116
Analysis of sensitivity behavior of Madalines
117
Analysis of sensitivity degradation caused by the flicker noise of GaAs-MESFETs in fiber-optic receivers
118
Analysis of sensitivity distribution in human chest during multichannel bioimpedance measurements
119
Analysis of Sensitivity for Six-Axis Force/Torque Sensor Based on Stewart Platform Sensor Based on Stewart
120
Analysis of sensitivity measures of finite-precision digital controller structures with closed-loop stability bounds
121
Analysis of sensitivity of microwave surface resistance measurement of HTS thin films using dielectric resonator with finite shield
122
Analysis of sensitivity of the performance of interleaved flyback converter to the principal design parameters
123
Analysis of Sensitivity to the Kernel Parameter Choice: Comparing the Performance Profiles Exhibited by Standard andLeast-Squares SVM Classifiers
124
Analysis of sensitivity to the main parameters involved in the digital implementation of the UIE flickermeter
125
Analysis of sensor and fusion schedules of a time-triggered sensor fusion system
126
Analysis of sensor and gripper jaw response times
127
Analysis of sensor characteristics and error eliminations of a wheeled mobile robot with range sensors
128
Analysis of Sensor Field in Electromagnetic Tomography
129
Analysis of sensor fingerprint for source camera identification
130
Analysis of sensor model accuracy on estimating exterior orientation parameters of satellite images
131
Analysis of sensor movement errors in monocular vision-based tracking systems
132
Analysis of Sensor Network Operating System Performance Throughout the Software Life Cycle
133
Analysis of sensor parameter characteristics and digital control on the electric drive´s performance
134
Analysis of sensor platform dynamics in ground vehicle
135
Analysis of sensor suites for a guided projectile
136
Analysis of sensorless peak current mode controlled quadratic boost converter
137
Analysis of sensorless traction control system for electric vehicle
138
Analysis of sensory information using artificial neural networks and fuzzy logic
139
Analysis of Sentence Ordering Based on Support Vector Machine
140
Analysis of sentiment on newspaper quotations: A preliminary experiment
141
Analysis of sentiments using unsupervised learning techniques
142
Analysis of Sentinel-1 marine applications potential
143
Analysis of Sentinel-1 mission capabilities
144
Analysis of Sentinel-1A FDBAQ after commissioning phase
145
Analysis of separately arranged patterns for suppression of Simultaneous Switching Noise
146
Analysis of Sequence Flight Delay and Propagation Based on the Bayesian Networks
147
Analysis of sequence impedance of 345 kV cable systems with special bondings using ATP
148
Analysis of sequences generated by ELCA-type Cellular Automata targeting noise generation
149
Analysis of Sequences of Cardiac Contours by Fourier Descriptors for Plane Closed Curves
150
Analysis of sequential algorithms as tools for modeling the chain-like-body evolution
151
Analysis of Sequential Machines
152
Analysis of Sequential Machines II
153
Analysis of sequential stopping rules
154
Analysis of SER Improvement by Radiation Hardened Latches
155
Analysis of serial and parallel soft input decryption schemes over a wireless channel
156
Analysis of serial concatenation schemes for non-binary modulations
157
Analysis of serial CT images for studying the RT effects in head-neck cancer patients
158
Analysis of serial MR images of joints
159
Analysis of serial search based code acquisition in the multiple transmit antenna aided DS-CDMA downlink
160
Analysis of serial versus simultaneous XY acoustooptic deflectors
161
Analysis of Serial-Search-Based Code Acquisition in the Multiple-Transmit/Multiple-Receive-Antenna-Aided DS-CDMA Downlink
162
Analysis of series and parallel hybrid bus fuel consumption on different edmonton transit system routes
163
Analysis of series and shunt line compensation by a unified power flow controller
164
Analysis of series capacitor application problems
165
Analysis of Series Capacitor Application Problems
166
Analysis of series capacitor application problems
167
Analysis of series compensated self excited induction generators for autonomous power generation
168
Analysis of series compensation and DC-link voltage controls of a transformerless self-charging dynamic voltage restorer
169
Analysis of series compensation from different aspects
170
Analysis of Series Generator Series Motor Drive
171
Analysis of series regulators as active two-port networks
172
Analysis of Series Resistance Losses in a-Si:H/c-Si Heterojunction Solar Cells
173
Analysis of Series-Connected Discrete Josephson Transmission Line
174
Analysis of series-connected saturable reactor with capacitive loading and finite control resistance by use of difference equations
175
Analysis of series-connected wound-rotor self-excited induction generator
176
Analysis of series-fed slot antenna arrays transversely coupled to a microstrip line including mutual coupling effects
177
Analysis of Series-Parallel Production Networks without Buffers
178
Analysis of series-parallel resonant converter
179
Analysis of series-parallel resonant converter with multipliers
180
Analysis of series-parallel resonant inductive coupling circuit using the two-port network theory
181
Analysis of series-resonant AC link inverter for improving output current
182
Analysis of Series-shunt Peaking network for CMOS Cascaded Amplifiers
183
Analysis of serpentine folded-waveguide slow-wave structures by elliptical conformal transformation
184
Analysis of Server Provisioning for Distributed Interactive Applications
185
Analysis of Server Workload and Client Interactions in a News-on-Demand Streaming System
186
Analysis of Service Contact´s Impact on Service Quality in Service Industry
187
Analysis of service delays in distributed systems with service oriented architecture
188
Analysis of service provider´s profit by modeling customer´s willingness to pay for IP QoS
189
Analysis of service selling and design for remanufacturing
190
Analysis of Service Transaction Flow Based on User´s Actions to Develop KQIs for WiBro Service
191
Analysis of Service-centric Cluster Supply Chain Alliance: A Case Study of JCH
192
Analysis of Service-Oriented Architectures with Sensitivity Analysis
193
Analysis of serving discipline algorithms for cellular networks
194
Analysis of servo system realized by disturbance observer
195
Analysis of servomechanisms with nonlinear feedback control
196
Analysis of session key negotiation & distribution protocols in Wireless Sensor Networks
197
Analysis of session sequences of stable peers in P2P systems
198
Analysis of SET Effects in a PIC Microprocessor for Selective Hardening
199
Analysis of SET propagation in flash-based FPGAs by means of electrical pulse injection
200
Analysis of SET Propagation in Flash-Based FPGAs by Means of Electrical Pulse Injection
201
Analysis of Set-cover traitor tracing scheme
202
Analysis of set-theoretic and stochastic models for fusion under unknown correlations
203
Analysis of settlement in new rural planning and design — Exemplified by Qingshuixi vellage of Gujia town, Zhijiang city
204
Analysis of settling behavior and design of cascaded precise positioning control in presence of nonlinear friction
205
Analysis of Settling Time of One Dimension Nonlinear Antenna Array
206
Analysis of SEU effects in a pipelined processor
207
Analysis of SEU effects in partially reconfigurable SoPCs
208
Analysis of SEU parameters for the study of SRAM cells reliability under radiation
209
Analysis of Seven Important Studies in Research of Joyful Learning and Society
210
Analysis of Seven Polyacrylamide(PAM)-Degrading Bacterias Using PCR-DGGE Method
211
Analysis of Seven Semiconductor Metallurgy Systems Used on Silicon Planar Transistors
212
Analysis of several methods for the response evaluation of HF field excited finite lines
213
Analysis of Several Neglected Issues of Energy Situation and Suggestions on the Energy Stratagem
214
Analysis of several scheduling algorithms under the nano-threads programming model
215
Analysis of Several-keV Electron Stimulated Desorption Gases from Oxygen-free Copper Electrode with a Directional Quadrupole Mass Spectrometer
216
Analysis of sever-loss in a helical slow-wave structure
217
Analysis of SF6 Decomposition Byproducts under Two kinds of PD Defects
218
Analysis of SF6 decomposition products by insulator flashover to detect the insulator condition
219
Analysis of SF6/N2 gas mixture decomposition by-products in electric discharges
220
Analysis of sfqCoDel for Active Queue Management
221
Analysis of SFR´s impaction on delay time based DMMAC for VANETs
222
Analysis of SGC-7901 apoptosis induced by CSBE and regulating gene expression with laser scanning microscopy and immunofluorescence flow cytometry technique
223
Analysis of SGC-7901 Apoptosis Induced by CSBE and Regulating Gene Expression with Laser Scanning Microscopy and Immunofluorescence Flow Cytometry Technique
224
Analysis of shadow and direct-feed radiation mutual coupling in paraboloid antennas
225
Analysis of shadow by HCPV panels for agriculture applications
226
Analysis of shadow effect in photovoltaic arrays using binary coding method
227
Analysis of shadow mask thermal deformation and prediction of beam landing shifts for color CRT
228
Analysis of Shadows behind Financial Bubbles
229
Analysis of shaft torque amplification caused by interaction between AC and DC system
230
Analysis of shaft torsional oscillation in a power system using a Lure Lyapunov function
231
Analysis of shaft torsional phenomena in governing large steam turbine generators with non-linear valve stroking
232
Analysis of shaft torsional vibration in inverter-fed induction motor drive systems
233
Analysis of shaft voltages in large synchronous generators
234
Analysis of shaking beam actuator for piezoelectric linear ultrasonic motor
235
Analysis of Shallow Bulk Acoustic Wave Excitation by Interdigital Transducers
236
Analysis of shallow-water experimental acoustic data including a comparison with a broad-band normal-mode-propagation model
237
Analysis of Shanghainese F0 contours based on the command-response model
238
Analysis of shape and orientation recognition capability of Complex Zernike Moments for signed gestures
239
Analysis of shape assumptions in 3D reconstruction of retina from multiple fundus images
240
Analysis of shape features of flame and interference image in video fire detection
241
Analysis of shape from shading algorithms for fast and realistic 3D face reconstruction APCCAS2002
242
Analysis of shape from shading techniques
243
Analysis of shape recognition capability of Krawtchouk moments
244
Analysis of shaped beam dielectric lens antennas for mobile broadband applications
245
Analysis of shaped dihedral reflectors application to polarimetric SAR calibration
246
Analysis of Shaped Pulse Transitions in Power Electronic Switching Waveforms for Reduced EMI Generation
247
Analysis of shaped-differ impelled-pins in edge wall waveguide slot
248
Analysis of shapes to measure surfaces: An approach for detection of deformations
249
Analysis of shared buffer multistage networks with hot spot
250
Analysis of Shared Finite Storage in a Computer Network Node Environment Under General Traffic Conditions
251
Analysis of shared memory misses and reference patterns
252
Analysis of Shared Memory Priority Queues with Two Discard Levels
253
Analysis of Shared Memory Priority Queues with Two Discard Levels
254
Analysis of shared-link AXI
255
Analysis of sharing overhead in shared memory multiprocessors
256
Analysis of sharp metal edge diagonal to the cell cube in FDTD grid
257
Analysis of sharp metal edges at 45° to the FDTD grid
258
Analysis of SHB and thermal characteristics in PC-VCSEL considering photonic crystal parameters
259
Analysis of shear strain imaging for classifying breast masses
260
Analysis of shear wall formwork burst in construction
261
Analysis of shear wave propagation derived from MR elastography in 3D thigh skeletal muscle using subject specific finite element model
262
Analysis of Shearer Gear Vibration in the No-Load State
263
Analysis of sheath transients in specially bonded cable systems using EMTP
264
Analysis of Sheet Electron Beam Transport Under Uniform Magnetic Field
265
Analysis of shielded anisotropic dielectric resonators using FDFD and the Arnoldi method
266
Analysis of shielded coplanar waveguide step discontinuity considering the finite metallization thickness effect
267
Analysis of shielded coplanar waveguide with trapezoidal electrodes
268
Analysis of shielded coupled microstrip line with partial dielectric support
269
Analysis of shielded CPW discontinuities with air-bridges
270
Analysis of shielded CPW spatial power combiners
271
Analysis of Shielded Electromagnetic Bandgap Structures Using Multiconductor Transmission-Line Theory
272
Analysis of shielded lossy multilayered-substrate microstrip discontinuities
273
Analysis of shielded membrane microstrip line using the finite-difference time-domain method
274
Analysis of shielded microstrip lines by finite-difference method
275
Analysis of shielded microstrip lines with arbitrary metallization cross section using a vector finite element method
276
Analysis of shielded microstrip structures by a MPIE formulation with the capability of isolating the side walls effects
277
Analysis of shielded planar circuits by a mixed variational-spectral method
278
Analysis of shielded striplines and finlines with finite metallization thickness containing magnetized ferrites
279
Analysis of shielded tents and other electrically thin shielded rooms
280
Analysis of shielded-room error for screened rooms and its application to low-frequency emission measurements from electrically small sources
281
Analysis of shielding effectiveness for various type of materials
282
Analysis of shielding effectiveness of a rectangular enclosure with aperture irradiated by plane wave using the intermediate circuit model
283
Analysis of shielding effectiveness of conductive cement-based materials in HEMP environment
284
Analysis of shielding effectiveness of enclosure with an aperture using FDTD method
285
Analysis of shielding effectiveness of HV cable and connector systems used for electric vehicles
286
Analysis of Shielding Effectiveness of Monolayer and Double Layer Cement Shield Rooms to HEMP
287
Analysis of Shielding Effectiveness of Rectangular Cavity with Apertures to ESD Radiated Field by Transmission Line Method
288
Analysis of Shielding Effectiveness of Rectangular Cavity with Improved Aperture Model
289
Analysis of Shielding Effectiveness of Reinforced Concrete Against High-Altitude Electromagnetic Pulse
290
Analysis of shielding effectiveness of reinforced-concrete in high power electromagnetic environment
291
Analysis of shielding effectiveness using finite-difference time-domain method
292
Analysis of shielding eficiency of a high voltage laboratory via the FDTD method by using sub-cellular conductive sheets
293
Analysis of shielding enclosures using the multilevel plane wave time domain algorithm
294
Analysis of shielding failure in transmission lines considering both first and subsequent strokes
295
Analysis of shielding layers in HTS cable taking account of spiral structure
296
Analysis of shielding performance in nonlinear media
297
Analysis of shielding performance of reinforced concrete structures using the method of moment
298
Analysis of Shielding Performance of Reinforced Concrete Structures Using the Method of Moments
299
Analysis of shift estimation techniques of super resolution applied to satellite images
300
Analysis of shift in Bragg wavelength of fiber Bragg gratings with finite cladding radius
301
Analysis of Shingle-Write Readback Using Magnetic-Force Microscopy
302
Analysis of ship magnetic field surveying based on two Tri-axial Magnetic Sensors
303
Analysis of ship size detectability over different TerraSAR-X modes
304
Analysis of shipboard HF antennas with PDMPH2 computer code
305
Analysis of shock error in fiber optic gyroscope induced by underwater explosion
306
Analysis of shock waves over novel supersonic aircraft profiles using shadowgraph
307
Analysis of shock-induced polysilicon MEMS failure: a multi-scale finite element approach
308
Analysis of shoe-spaded waveguide with dielectric in capacity gap
309
Analysis of shopping behavior based on surveillance system
310
Analysis of shore changes between August 2008 and August 2009 and their relationship to hydrodynamic conditions on Kelba Spit, Saaremaa Island, Estonia
311
Analysis of short- and long-term performance goals for III/V on active Si concentrator solar cells
312
Analysis of Short Channel Effects in Poly-Si Thin Film Transistors: A New Method
313
Analysis of Short Circuit Axis-Direction Stability for Windings of Electrical Power Transformer
314
Analysis of Short Circuit Current of Wind Turbine - Doubly Fed Induction Generator
315
Analysis of short circuit currents in distribution networks with dispersed generation
316
Analysis of short circuit faults in a system fed by wind turbine
317
Analysis of Short Circuit Performance of Split-Winding Transformer Using Coupled Field-Circuit Approach
318
Analysis of short circuits for distribution systems
319
Analysis of short circuits for distribution systems
320
Analysis of Short Circuits for Distribution Systems
321
Analysis of short distance optoelectronic link architectures
322
Analysis of short pulse breakdown in water dielectric
323
Analysis of Short Term Path Prediction of Human Locomotion for Augmented and Virtual Reality Applications
324
Analysis of short term scintillation effects of Ku band satellite links in Sri Lanka
325
Analysis of Short Term Temporal Fluctuations in Noise Power Spectrum of Shallow Water Ambient Noise
326
Analysis of short-channel MOSFET´s with field-dependent carrier-drift mobility
327
Analysis of short-circuit asymmetrical currents in power distribution systems
328
Analysis of short-circuit conditions for silicon carbide power transistors and suggestions for protection
329
Analysis of short-circuit forces at the top of the low voltage U-type and I-type winding in a power transformer
330
Analysis of Short-Circuit Oscillograms
331
Analysis of short-circuit oscillograms
332
Analysis of Short-Circuit Performance of Split-Winding Transformer Using Coupled Field-Circuit Approach
333
Analysis of short-circuit transients of a PM machine
334
Analysis of shorted coaxial peripheral feeding networks for conical line power combiners
335
Analysis of shorted plate folded feed L-slot cut microstrip antenna
336
Analysis of shorted V-slot cut dual and wide band triangular microstrip antenna
337
Analysis of shorted-plate compact and broadband microstrip antenna
338
Analysis of Shortest Path Routing for Large Multi-Hop Wireless Networks
339
Analysis of short-term and long-term characteristics of PV power production
340
Analysis of Short-term Bidding Strategies in Power Markets
341
Analysis of short-term estuarine phytoplankton dynamics using neural networks
342
Analysis of short-term NBTI effect on the Single-Event Upset sensitivity of a 65nm SRAM using two-photon absorption
343
Analysis of short-wave antenna array characteristics by moment method
344
Analysis of Shrimp´s Mating Motion Using CHLAC Feature
345
Analysis of shroud options in support of the human exploration of Mars
346
Analysis of shunt - series slot fed waveguide broad wall shunt slot radiator
347
Analysis of shunt active power filter using time based reference current generation techniques
348
Analysis of shunt active power filters using PSCAD for parallel operation
349
Analysis of Si and SiGe integrated optical devices
350
Analysis of Si Integrated Dipole Antennas for Ultrawideband Signal Transmission
351
Analysis of Si substrate damage induced by inductively coupled plasma reactor with various superposed bias frequencies
352
Analysis of Si, InAs, and Si-InAs tunnel diodes and tunnel FETs using different transport models
353
Analysis of Si:Ge heterojunction integrated injection logic (I2L) structures using a stored charge model
354
Analysis of Si3N4 passivation effect by self-consistent electro-thermal-mechanical simulation in AlGaN/GaN heterostructure HEMTs
355
Analysis of Si-body thickness variation for a new 40 nm gate length bFDSOI
356
Analysis of SiC based power electronic inverters for high speed machines
357
Analysis of SiC BJT RBSOA
358
Analysis of SiC JFET devices during pulsed operation
359
Analysis of SiC MOSFETs under hard and soft-switching
360
Analysis of SiC Super Junction Transistors during pulsed operation
361
Analysis of SiC technology in two-level and three-level converters for aerospace applications
362
Analysis of side coupled standing wave linear accelerator structure by the perturbation method
363
Analysis of side information generation impact on distributed video coding performance
364
Analysis of Side Lobes Cancellation Methods for BOCcos(n, m) signals
365
Analysis of side writing asymmetry
366
Analysis of side writing asymmetry
367
Analysis of Side-approach Transfer Motion for Patients with Spinal Cord Injuries
368
Analysis of sidelobe effects and resolution of PTFT
369
Analysis of Sidelobe Elevation for Polyphase Complementary Codes through the Non-ideal System
370
Analysis of sidewall cleans relating to titanium salicide filaments
371
Analysis of sidewall films formed during Si etching with photoresist and nitride mask
372
Analysis Of Sidewall Lateral Parasitic Leakage In A 16-mb Dram Cell
373
Analysis of Sieve of Eratosthenes method using MPI program over grid and cluster platforms using stastical DOE methodology
374
Analysis of SIFT like Active Queue Management algorithms
375
Analysis of SiGe HBT Characteristic Times
376
Analysis of sigma-delta converters for MEMS sensors using power supply voltage as reference
377
Analysis of sigma-delta micro-mechanical accelerometer´s parameters
378
Analysis of sigma-delta modulation techniques in low frequency DC-AC converters
379
Analysis of sigmoidal utility function based handover in heterogeneous wireless networks
380
Analysis of Sign Language Gestures Using Size Functions and Principal Component Analysis
381
Analysis of signal amplitude in Chirped Laser Dispersion Spectroscopy
382
Analysis of signal and power/ground pin assignment in multi-layer PCB and its impact on signal integrity and crosstalk
383
Analysis of signal bandwith effect on the performance of passive TDOA Estimation
384
Analysis of Signal Cancellation Due To Multipath in Optimum Beamformers for Moving Arrays
385
Analysis of signal characteristic and resolution in ground forward scattering radar
386
Analysis of signal coherence in ultrasound beamforming
387
Analysis of signal degree of polarization degradation induced by polarization-mode dispersion in optical fibers
388
Analysis of signal degree of polarization degradation used as control signal for optical polarization mode dispersion compensation
389
Analysis of signal de-noising method based on an improved wavelet thresholding
390
Analysis of signal distortion and crosstalk penalties induced by optical filters in optical networks
391
Analysis of signal distortion due to third order nonlinearity in WCDMA receivers
392
Analysis of signal estimation using uncalibrated arrays
393
Analysis of signal game model as for defense strategies between insurer and doctor in medical liability insurance
394
Analysis of signal impairment and crosstalk penalty induced by different types of optical filters in 100 Gbps PM-DQPSK based systems
395
Analysis of signal integrity in high-speed digital ICs, by combining MOSFET modeling and the LE-FDTD method
396
Analysis of signal integrity(SI) robustness in through-silicon interposer (TSI) interconnects
397
Analysis of signal integrity/power integrity in multilayer printed circuit board and two improving methods
398
Analysis of signal interference in human body communication using human body as transmission medium
399
Analysis of signal probability in logic circuits using stochastic models
400
Analysis of Signal Processing Distortion in Radar Systems
401
Analysis of signal propagation in 1-D CNNs with the antisymmetric template
402
Analysis of signal propagation in high-speed differential signal lines with full-wave time-domain technique
403
Analysis of Signal Propagation in Transmission Lines in Configuration Process of CAN-bus Controller
404
Analysis of signal propagation loss on the human body in intrabody communication
405
Analysis of signal propagation path modeling of UWB through-the-wall radar
406
Analysis of Signal Reconstruction With Jittered Sampling
407
Analysis of signal separation and distortion analysis in feedforward blind source separation for convolutive mixture
408
Analysis of signal separation and signal distortion in feedforward and feedback blind source separation based on source spectra
409
Analysis of signal to noise ratio in photonic beamformers
410
Analysis of signal to noise ratio of photoconductive layered solid-state imaging device
411
Analysis of signal transmission along graphene-based interconnect structures
412
Analysis of signal transmission COFDM by means of radio-relay lines
413
Analysis of Signal Transmission for Use of Logging While Drilling
414
Analysis of Signal Transmission in Ultra High Speed Transistorized Digital Computers
415
Analysis of Signal Transmission with Temperature-Dependent Electrical Parameters Using FDTD
416
Analysis of signal voltage in a semiconductor ring laser gyro
417
Analysis of signal/event nets
418
Analysis of Signaling Cost for a Roaming User in a Heterogeneous Mobile Data Network
419
Analysis of signaling design in LTE-Advanced coordinated multipoint transmission/reception system
420
Analysis of signaling in a finite stochastic system motivated by decentralized control
421
Analysis of Signaling in GMPLS-Based WSONs: Distributed Wavelength Assignment in Bidirectional Lightpath Provisioning
422
Analysis of Signaling Load and Negotiation Complexity using Network Composition in Multi-Provider Business Environments
423
Analysis of signaling pathways in human T-cells using Bayesian network modeling of single cell data
424
Analysis of signals in Fractional Fourier Domain
425
Analysis of signals propagating in a phononic crystal PZT layer deposited on a silicon substrate
426
Analysis of signals spectrum in the shallow sea
427
Analysis of signals statistics and drop-out behaviour of magnetic tapes
428
Analysis of Signals Under Compositional Noise With Applications to SONAR Data
429
Analysis of signals under compositional noise with applications to SONAR data
430
Analysis of signal-to-interference ratio estimation methods for wireless communication systems
431
Analysis of signal-to-noise ratio distributions and bit error rates for equal gain diversity systems on generalized fading channels
432
Analysis of signal-to-noise ratio in optical receivers
433
Analysis of signature and signature free bufferoverflow detection for gif and jpg format
434
Analysis of Signature Wrapping Attacks and Countermeasures
435
Analysis of Significant Components for Designing an Effective Dynamic Load Balancing Algorithm in Distributed Systems
436
Analysis of significant current tracking error and suppression of over-shoot current in grid-connected voltage source converter with abc frame control
437
Analysis of significant factors for dengue infection prognosis using the self organizing map
438
Analysis of Significant Factors on Cable Failure Using the Cox Proportional Hazard Model
439
Analysis of Significant Parameters Affecting the Shielding Failure of HVDC-TL
440
Analysis Of Significant Wave Height Temporal And Spatial Scales
441
Analysis of silicide process defects by non-contact electron-beam charging
442
Analysis of silicon carbide power device performance
443
Analysis of Silicon Ion-Implanted Nd:YVO4 as a Waveguide Laser Medium Operating at 1.06 μm
444
Analysis of silicon on-chip integrated antennas for intra- and inter-chip wireless interconnects
445
Analysis of Silicon Ridge Waveguides for Acoustic Surface Waves
446
Analysis of silicone-based adhesive bond separation
447
Analysis of silver front electrode / emitter interface structure by SPM method
448
Analysis of silver thick-film contact formation on industrial silicon solar cells
449
Analysis of Similar Material in Shaking Table Test
450
Analysis of Similarity Coefficients in Fuzzy Node Fuzzy Graph and Its Application
451
Analysis of SIMOX buried oxide leakage by direct measurements
452
Analysis of simple anti-windup compensation in approximate pole-placement control of a second order oscillatory system with time-delay
453
Analysis of Simple FSS Cascading With Dual Band Response
454
Analysis of simple two-capacitor low-pass filters
455
Analysis of simplified gradient adaptive lattice algorithms using power-of-two quantization
456
Analysis of simplified model relevant to propagation of microwave phonons in y.i.g. rods
457
Analysis of Simplified SB-ADI Scheme for Two-Dimensional Maxwell´s Equations
458
Analysis of simulated annealing for optimization
459
Analysis of simulated electrogastrograms using parameters associated with correlation for detection of phase shift between signals
460
Analysis of Simulated Heart Sounds by Intrinsic Mode Functions
461
Analysis of simulated L-Band signals reflected from a sea surface using time-frequency representations
462
Analysis of simulated partial discharges in a high voltage transformer by Coherence Function
463
Analysis of Simulated Polarimetric SAR Images Generated by a Multilayer Electromagnetic Scattering Model
464
Analysis of Simulatenous Faults by Two-Port Network Theory
465
Analysis Of Simulation Data Using Sandie
466
Analysis of simulation design of the disc eddy current braking device
467
Analysis of simulation experiments by bootstrap resampling
468
Analysis of simulation factorial experiments by EDF resample statistics
469
Analysis of simulation of DDOS attack in cloud
470
Analysis of simulation of fleshy food company logistics system based on Flexsim
471
Analysis of simulation output
472
Analysis of simulation-driven numerical performance modeling techniques for application to analog circuit optimization
473
Analysis of simultaneous digital and analogue signal transmission in a coherent optical subcarrier multiplexed system
474
Analysis of simultaneous ground and phase faults on a six phase power system
475
Analysis of Simultaneous Ground and Phase Faults on a Six Phase System
476
Analysis of simultaneous line-to-ground faults
477
Analysis of Simultaneous Line-to-Ground Faults
478
Analysis of Simultaneous Mobility under Asymmetric Mobility Conditions
479
Analysis of Simultaneous Multiwavelength Anomalous Diffraction for phasing protein crystals
480
Analysis of Simultaneous Photonic Frequency Downconversion and Optical Subcarrier Modulation in an Electroabsorption Modulator
481
Analysis of simultaneous switching noise
482
Analysis of simultaneous switching noise by short-circuit current in CMOS-single ended driver
483
Analysis of Simultaneous Switching Noise Coupling in Multilayer Power/Ground Planes With Segmentation Method and Cavity Model
484
Analysis of Simultaneous Switching Noise on Power Distribution Networks using Modified Hybrid Time-Frequency Method
485
Analysis of sine wave temperature generator using by thermoelectric heat source
486
Analysis of sine-type non-linearity in control systems
487
Analysis of sine-wave inverter´s harmonic contents by simulation
488
Analysis of singing during epileptic seizures based on partial coherence
489
Analysis of singing voice for epoch extraction using Zero Frequency Filtering method
490
Analysis of single and coupled microstrip lines on anisotropic substrates using differential matrix operators and the spectral-domain method
491
Analysis of Single and Coupled Rectangular Dielectric Waveguides
492
Analysis of Single and Coupled Striplines with Anisotropic Substrates
493
Analysis of single and mixed 802.11 networks and mobility architecture
494
Analysis of single and multi carrier modulation schemes for 42 GHz broadband wireless systems
495
Analysis of single and multi-channel SAR data using fuzzy logic
496
Analysis of single and stacked microstrip patch antennas residing in a cavity by a Green´s function technique
497
Analysis of single array experiments on sphinx machine in 6 MA-800 ns regime for radiation effects and hedp studies
498
Analysis of single carrier offset-stacked OCC-CDMA system with Rake receiver
499
Analysis of single electron tunnelling oscillations in long arrays of tunnel junctions
500
Analysis of Single Event Effect on SRAM Based on TCAD Simulation
501
Analysis of single event effects at grazing angle
502
Analysis of single event effects at grazing angle [CMOS SRAMs]
503
Analysis of Single Events Effects on Monolithic PLL Frequency Synthesizers
504
Analysis of single excitation signal for high speed ECVT data acquisition system
505
Analysis of single flying capacitor converter by the state-space averaging technique
506
Analysis of Single Halo Double Gate MOSFETs using high-k dielectrics
507
Analysis of single layer multiple concentric ring elements in reflectarray antennas
508
Analysis of single mode inhomogeneous planar waveguides
509
Analysis of single nanoparticle detection by using 3-dimensionally confined optofluidic ring resonators
510
Analysis of single pass ECH propagation and absorption experiments in MTX
511
Analysis of Single Perceptrons Learning Capabilities
512
Analysis of single phase active power filter
513
Analysis of single phase asymmetric Z-source inverter
514
Analysis of single phase diode rectifiers with power factor correction circuits
515
Analysis of single phase induction motors using the IODEKICE LOCUS
516
Analysis of single phase inverter with Maximum Power Point Tracking
517
Analysis of Single Phase Switching Field Tests on the AEP 765 KV System
518
Analysis of Single Phase Switching Field Tests on the AEP 765 KV System
519
Analysis of single photon micropillar optical switch using semi-analytical model
520
Analysis of Single Pole Reclosing on EHV Line in Thailand
521
Analysis of single server queueing systems with heavy tail distributions
522
Analysis of single side axial flux brushless DC motor with different number of stator electromagnetic poles
523
Analysis of Single Side Axial Flux Brushless DC Motor with Two Different Stator Geometries
524
Analysis of Single Sideband Modulation in Microwave Systems for Television (Video) Transmission
525
Analysis of single switch delta-sigma modulated pulse space modulation PFC converter effectively using switching power device
526
Analysis of single unknown volume integral equation for general scatterers
527
Analysis of single-axial rotation modulation influence on FOG INS precision
528
Analysis of Single-Cell Modeling of Periodic Metamaterial Structures
529
Analysis of single-chip hardware support for mobile and embedded applications
530
Analysis of single-defect cavities in 3D photonic crystal
531
Analysis of single-ended and differential striplines crossing split reference planes in PCBs
532
Analysis of single-ended traveling-wave fault location based on continuous wavelet transform inferred from signal
533
Analysis of single-event effects in combinational logic-simulation of the AM2901 bitslice processor
534
Analysis of single-event effects in continuous-time Delta-Sigma Modulators
535
Analysis of single-event effects in embedded processors for non-uniform fault tolerant design
536
Analysis of single-event transients in analog circuits
537
Analysis of Single-Event Transients in Integer- N Frequency Dividers and Hardness Assurance Implications for Phase-Locked Loops
538
Analysis of single-ground-plane coplanar waveguide
539
Analysis of single-ion multiple-bit upset in high-density DRAMs
540
Analysis of single-mode Bragg fiber with large core diameter
541
Analysis of single-mode fused tapered fibre couplers
542
Analysis of single-mode optical Y-junction by the bounded step and bend approximation
543
Analysis of single-path and multi-path AODVs over Manhattan Grid mobility model for mobile Ad hoc networks
544
Analysis of Single-Phase 50-kW 16.7-Hz PI-Controlled Four-Quadrant Line-Side Converter Under Different Grid Characteristics
545
Analysis of single-phase boost power factor correction (PFC) converter
546
Analysis of single-phase capacitor-input rectifier circuits
547
Analysis of single-phase induction motor by using circuit-coupled finite element method
548
Analysis of single-phase induction motors with centrifuged rotors
549
Analysis of Single-phase Line Start Permanent Magnet Motor Considering Overhang Structure Effect
550
Analysis of single-phase line-start permanent-magnet motor considering iron loss and parameter variation with load angle
551
Analysis of single-phase PLL with novel two-phase generator for grid-connected converters
552
Analysis of single-phase pulsating-flow hydraulic control system
553
Analysis of single-phase rectified thyristor-controlled load with integral-cycle triggering
554
Analysis of single-phase rugged resonant DC link inverter
555
Analysis of single-phase-to-3-phase static phase converters
556
Analysis of Single-Phase-to-Ground Fault Generated Initial Traveling Waves
557
Analysis of Single-Photon-Detection Characteristics of GaInAs/InP Avalanche Photodiodes
558
Analysis of single-platform passive emitter location with terrain data
559
Analysis of single-step damping in a multistack variable reluctance stepping motor
560
Analysis of single-tone spurious effects in nondesensitized radio communication systems
561
Analysis of Single-Trap-Induced Random Telegraph Noise and its Interaction With Work Function Variation for Tunnel FET
562
Analysis of Single-Trap-Induced Random Telegraph Noise on FinFET Devices, 6T SRAM Cell, and Logic Circuits
563
Analysis of single-trial EEG data using a combined robust pre-whitening technique and ICA approach
564
Analysis of singly and doubly periodic absorbers by frequency-domain finite-difference method
565
Analysis of singular bilinear systems using Walsh functions
566
Analysis of singular systems using orthogonal functions
567
Analysis of singular systems using orthogonal functions
568
Analysis of singular systems using orthogonal functions
569
Analysis of singular systems using orthogonal functions
570
Analysis of singular systems using Taylor series approach
571
Analysis of singular value decomposition using high dimensionality data
572
Analysis of singular values PDF and CCDF on receiver-side antennas correlated MIMO channels
573
Analysis of singularities from modulus maxima of complex wavelets
574
Analysis of singularities in vector optical waves
575
Analysis of Singularly Perturbed Stochastic Hybrid Systems
576
Analysis of SINR for UMTS RAKE receiver-smart antenna processing using two different modelling approaches
577
Analysis of SINR loss for waveform design of known-target in signal-dependent interference
578
Analysis of sinusoidal current reference generation with flat instantaneous active power for unbalanced grids
579
Analysis of sinusoidal shaped microstrip bandstop filter by the static circuit parameters method
580
Analysis of SiO/sub 2//InP interfaces using gated photoluminescence and Raman spectroscopy
581
Analysis of SIP and realization of advanced IP-PBX features
582
Analysis of SIP retransmission probability using a Markov-Modulated Poisson Process model
583
Analysis of SIP Transfer Delay in Multi-Rate Wireless Networks
584
Analysis of SIP-Based IMS Session Establishment Signaling for WiMax-3G Networks
585
Analysis of SIP-Based Location Updates in Distributed Mobility Management Schemes
586
Analysis of SIP-Based Threats Using a VoIP Honeynet System
587
Analysis of SIR for spectrum sharing system with OSTBC in Nakagami fading
588
Analysis of SIR-based Triple SC System over Correlated Alpha-Mu Fading Channels
589
Analysis of S-I-R-S Model on Complex Network Based on the Continuous Time Markov Chain
590
Analysis of SISO front-end decoders in IM/DD optical channels with application to turbo code decoding
591
Analysis of site attenuation for spherical dipole antenna and its application
592
Analysis of situated human´s transfer characteristics
593
Analysis of six degrees of separation in Facebook using Ant colony optimization
594
Analysis of six-port disk circulator using subdivided ports
595
Analysis of Six-Port Measurement Systems
596
Analysis of Six-Port Optical Fiber Couplers Based on Three Parallel Long-Period Fiber Gratings
597
Analysis of six-pulse and twelve-pulse forced commutated HVDC converters
598
Analysis of size distribution of red blood corpuscles using surface Plasmon resonance sensor for medical diagnosis
599
Analysis of Size Effect in PZT Thin Film Capacitors
600
Analysis of size of tree crown on aerial image using circle unification
601
Analysis of skeletal wire conical antennas
602
Analysis of skeleton junctions in 3*3 windows
603
Analysis of skew antenna around a square tower for UHF TV broadcasting
604
Analysis of skew effects on cogging torque and BEMF for BLDCM
605
Analysis of skewing in amplitude distributions of filtered m sequences
606
Analysis of skin blood flow signals in the frequency domain applied to the vasodilators histamine and methylnicotinate
607
Analysis of skin color models for face detection
608
Analysis of skin erythema using true-color images
609
Analysis of Skin Inheritance Using FOS
610
Analysis of skin lesions with pigmented networks
611
Analysis Of Skin Potential Response Using A Novel Feature Code For The Study Of The Emotional Response
612
Analysis of Skin-Electrode Impedance Using Concentric Ring Electrode
613
Analysis of skin-temperature variability compared to variability of blood pressure and heart rate
614
Analysis of Skip Motion as a Recovery Strategy after an Induced Trip
615
Analysis of slab waveguide discontinuities including radiation and absorption effects
616
Analysis of slant STEC methodologies
617
Analysis of slanted air-gap structure of interior permanent magnet synchronous motor with brushless field excitation
618
Analysis of slap segmentation and HBSI errors across different force levels
619
Analysis of Slave–Slave Bridging in IEEE 802.15.4 Beacon-Enabled Networks
620
Analysis of sleep and stress profiles from biomedical signal processing in wearable devices
621
Analysis of sleep deprivation effect to driving performance using reactiontest simulation
622
Analysis of Sleep Fragmentation and Sleep Structure in Patients With Sleep Apnea and Normal Volunteers
623
Analysis of sleep mode operation with modified non-exhaustive vacation queuing
624
Analysis of sleep spindles in different NREM-REM cycles by means of bispectra
625
Analysis of sleep-mode downlink scheduling operations in EPON systems
626
Analysis of slice emittance measurements for the SLAC Gun Test Facility
627
Analysis of sliding and pressure distribution during a repositioning of persons in a simulator chair
628
Analysis of Sliding Frame R-ALOHA for Real-Time Ad Hoc Wireless Networks in a Fading Environment
629
Analysis of sliding mode control systems in the frequency domain
630
Analysis of sliding of a soft fingertip embedded with a novel micro force/moment sensor: Simulation, experiment, and application
631
Analysis of sliding-mode and PWM control for a DC motor
632
Analysis of slit rotor slot of high speed SRIM and comparison with double cage rotor slot
633
Analysis of SLL at UWB scanning array based on TTD BFN
634
Analysis of slope based heart rate asymmetry using poincaré plots
635
Analysis of slope failures due to the 2000 Tokai Heavy Rainfall using high resolution satellite images
636
Analysis of slope length on water soil erosion
637
Analysis of slopestability under the rainfall infiltration
638
Analysis of slot antenna on dielectric substrate
639
Analysis of slot antenna with dielectric overlay fed by dielectric image line
640
Analysis of slot array antennas on a radial fed line
641
Analysis of Slot Characteristics in Slotted Single-Mode Semiconductor Lasers Using the 2-D Scattering Matrix Method
642
Analysis of slot coupled, circular microstrip patch antennas
643
Analysis of slot coupling between rectangular waveguides with non-identical offsets
644
Analysis of slot coupling in a radial line slot antenna for DBS reception
645
Analysis of slot cut multi-band rectangular microstrip antenna
646
Analysis of Slot Cut Triple Band Rectangular Microstrip Antennas
647
Analysis of slot lines on ferrite substrate by the integral kernel expansion method
648
Analysis of slot loaded microstrip antenna using moment method
649
Analysis of slot loaded microstrip patch antenna
650
Analysis of slot spectrum selection for Long Term Evolution (LTE)
651
Analysis of slot-coupled double-sided cylindrical microstrip lines
652
Analysis of slot-coupled transitions from microstrip-to-microstrip and microstrip-to-waveguides
653
Analysis of slot-eavesdrop of coaxial cable with FDTD method
654
Analysis of slotlines and microstrip lines on anisotropic substrates
655
Analysis of slot-loaded end-coupled resonator CPW bandpass filters
656
Analysis of slot-pole combination of fractional-slots PMSM for embedded applications
657
Analysis of slots and notches loaded patch antenna for dualband operation
658
Analysis of slots in nonradiating dielectric waveguide using the modal expansion method
659
Analysis of slots on a cylindrically layered structure using closed-form green’s functions
660
Analysis of Slotted Aloha with multipacket messages in clustered surveillance networks
661
Analysis of slotted and unslotted CSMA/CA Wireless Sensor Network for E-healthcare system
662
Analysis of slotted CDMA packet access based on non-linear multiuser detection
663
Analysis of slotted frequency-hopped packet radio networks with random and deterministic hopping patterns
664
Analysis of slotted sectoral waveguide array antennas with multilayer radomes and nonzero metal thickness
665
Analysis of slotted sectoral waveguides embedded in cylindrically stratified media using closed-form Green´s function representations
666
Analysis of slotted waveguide antennas on large platforms using an equivalent model
667
Analysis of slotted waveguide structure using MoM techniques
668
Analysis of Slotted, Dielectrically Loaded, Ridged Waveguide
669
Analysis of Slovenian energy development scenarios on the bases of the GEMIS model
670
Analysis of slow orbit movement in PLS storage ring
671
Analysis of Slow Read DoS attack
672
Analysis of slow-frequency-hop satellite communications using ambiguity functions
673
Analysis of Slow-Scale Instability in Boost PFC Converter Using the Method of Harmonic Balance and Floquet Theory
674
Analysis of Slow-Wave Coplanar Waveguide for Monolithic Integrated Circuits
675
Analysis of slow-wave phenomena in coplanar waveguide on a semiconductor substrate
676
Analysis of slow-wave transmission lines on multi-layered semiconductor structures including conductor loss
677
Analysis Of SLP Interactions And Service Processing In A Distributed Slee
678
Analysis of SMAC protocol for missioon critical applications in wireless sensor networks
679
Analysis of small antennas in MWD tools using unconditionally stable FDTD method in cylindrical coordinates
680
Analysis of Small Aperture Coupling Between Rectangular Waveguide and Microstrip Line
681
Analysis of small area interdigtiated back contact silicon solar cells: The influence of boron diffusion process on cell performances
682
Analysis of small arrays above ground planes of finite extent
683
Analysis of small beamlets for IMRT using radiochromic films
684
Analysis of small broadband flare antennas by an improved FD-TD method
685
Analysis of small cell networks with randomly wandering users
686
Analysis of small cell partitioning in urban two-tier heterogeneous cellular networks
687
Analysis of small deflections by double-exposure digital holographic interferometry
688
Analysis of Small Disturbance Stability Regions of Power System Models with Real and Reactive Power Flows
689
Analysis of small scale bedforms with 2D and 3D image acquisition techniques
690
Analysis of Small Signal Stability of Grid-Connected Doubly Fed Induction Generators
691
Analysis of small target detection algorithm based on image gray entropy
692
Analysis of Small Time Delay Stability in Force Telepresence System
693
Analysis of small urban spatial expansion based on SLEUTH model: Taking Xinxiang city, Henan province of China as an example
694
Analysis of small-scale DF cold-reaction CW lasers
695
Analysis of Small-Signal Frequency Response of Vertical Cavity Semiconductor Optical Amplifiers
696
Analysis of small-sized winding type directional coupler
697
Analysis of smart antenna outage in UTRA FDD networks
698
Analysis of smart electromagnetic sensor for robot effector positioning
699
Analysis of Smart Grid security standards
700
Analysis of Smart Mobile Applications for Healthcare under Dynamic Context Changes
701
Analysis of SMART reactor core using COREDAX code
702
Analysis of smartphone model identification using digital images
703
Analysis of smartphone traffic with MapReduce
704
Analysis of Smartphone User Behavior
705
Analysis of smoke during prescribed fires
706
Analysis of Smooth Muscle Constants by Pole-Zero Method
707
Analysis of smooth transition section in microwave regeneration system of diesel filter
708
Analysis of smoothing methods for language models on small Chinese corpora
709
Analysis of Smoothing Techniques for Subspace Estimation with Application to Channel Estimation
710
Analysis of SMT decoupling capacitor placement in electronic packages using hybrid modeling method
711
Analysis of SMT Residues after Reflow
712
Analysis of SMTP Connection Characteristics for Detecting Spam Relays
713
Analysis of snake movement forms for realization of snake-like robots
714
Analysis of snapback behavior on the ESD capability of sub-0.20 μm NMOS
715
Analysis of Snapback in Soi nMosfets and its Use for an Soi Esd Protection Circuit
716
Analysis of sneak paths and sense-line distortion in an improved capacitor read-only memory
717
Analysis of sneak paths and sense-line distortion in an improved capacitor read-only memory
718
Analysis of Snoop TCP protocol in GPRS system
719
Analysis of SNOW 3G resynchronization mechanism
720
Analysis of snow cover in Alaska using aircraft microwave data (April 1995)
721
Analysis of snow cover in landslide prone areas: The example of Tena Valley, Central Pyrenees, Spain
722
Analysis of snow covered radome with ray tracing method
723
Analysis of snow-free vegetation and bare soil albedos and application to numerical weather prediction
724
Analysis of Snowpack Properties and Estimation of Snow Grain Size using CLPX Data
725
Analysis of SNP Interaction Combinations to Determine Breast Cancer Risk with PSO
726
Analysis of SNP-expression association matrices
727
Analysis of SNR loss for passive coherent location radar
728
Analysis of SNR threshold for differential Doppler frequency measurement in digital receivers
729
Analysis of SNs popularity from different perspectives among users
730
Analysis of snubber-clamped diode-string mixed voltage interface ESD protection network for advanced microprocessors
731
Analysis of SOA-based middleware service layers for polynary resources SoC
732
Analysis of Soccer Actions using Wireless Accelerometers
733
Analysis of Soccer Coach´s Eye Gaze Behavior
734
Analysis of social acceptance of rural Solar Water Heater projects in South Africa
735
Analysis of social cost internalization and investment valuation of reverse logistics
736
Analysis of Social Dynamics on FDA Panels Using Social Networks Extracted from Meeting Transcripts
737
Analysis of social learning network for wiki in moodle E-Learning
738
Analysis of social media messages for disasters via semi supervised learning
739
Analysis of social networking services organizations´ profit model based on Web2.0
740
Analysis of social networks implementation in scope of business environment
741
Analysis of Social Smile Sharing Using a Wearable Device that Captures Distal Electromyographic Signals
742
Analysis of social vulnerability to natural disasters in China
743
Analysis of societal event impacts on the power system frequency using FNET measurements
744
Analysis of soft and hard strip-loaded horns using a circular cylindrical model
745
Analysis of soft and hard surfaces using a hybrid FEM/Floquet´s mode technique
746
Analysis of soft breakdown failure with ESD on output buffer nMOSFETs and its improvement
747
Analysis of soft computing EMI sensor
748
Analysis of soft decision decoding of interleaved convolutional codes over burst channels
749
Analysis of Soft Error Mitigation Techniques for Register Files in IBM Cu-08 90nm Technology
750
Analysis of Soft Error Propagation Considering Masking Effects on Re-Convergent Path
751
Analysis of soft error rate in flip-flops and scannable latches
752
Analysis of soft error rates in combinational and sequential logic and implications of hardening for advanced technologies
753
Analysis of Soft Failures in Low-Resistance Interconnect Vias Using Doubly Nesting Arrays
754
Analysis of soft faults´ mathematical model based on resistive-inductive model of internal noises in VLSI
755
Analysis of soft handoff algorithms with dynamic spreading WCDMA system
756
Analysis of soft handoff rate in DS-CDMA cellular systems
757
Analysis of soft handover margin in downlink WCDMA system
758
Analysis of soft synchronous commutations in switching converters
759
Analysis of softfare process improvement efforts in Pakistan
760
Analysis of soft-handover characteristics in realistic urban UMTS radio networks
761
Analysis of soft-state user tracking of wireless LAN hosts for VoIP
762
Analysis of Soft-Switching Isolated Time-Sharing Multiple-Input Converters for DC Distribution Systems
763
Analysis of Software AES in SparrowE Wireless Sensor Networks
764
Analysis of Software Aging in a Web Server
765
Analysis of software and server hardware impact on energy efficiency
766
Analysis of software automation test protocol
767
Analysis of software availability/reliability under the influence of hardware failures
768
Analysis of software based GPS data for studying some characteristics of Ionospheric Irregularities
769
Analysis of software connectors in robotics
770
Analysis of software contributions to military aviation and drone mishaps
771
Analysis of software cost models with rejuvenation
772
Analysis of software design modeled by multiple finite state machines
773
Analysis of Software Evolvability in Quality Models
774
Analysis of software halts in the tandem GUARDIAN operating system
775
Analysis of software maintenance data using multi-technique approach
776
Analysis of software process improvement experience using the project visibility index
777
Analysis of Software Product Line Architecture Representation Mechanisms
778
Analysis of software quality cost modeling’s industrial applicability with focus on defect estimation
779
Analysis of Software Rejuvenation in Clustered Computing System with Dependency Relation between Nodes
780
Analysis of software rejuvenation using Markov Regenerative Stochastic Petri Net
781
Analysis of software reliability by fuzzy regression model
782
Analysis of Software Reliability Modeling Considering Testing Compression Factor and Failure-to-Fault Relationship
783
Analysis of software specifications based on statistics of Markov chain
784
Analysis of Software Streaming Data
785
Analysis of software system requirements models
786
Analysis of software test item generation - comparison between high skilled and low skilled engineers
787
Analysis of Software Testing Strategies Through Attained Failure Size
788
Analysis of SOI cavity resonator by means of a fully automatic time-domain response prediction algorithm
789
Analysis of SOI CMOS Microprocessor´s SEE Sensitivity: Correlation of the Results Obtained by Different Test Methods
790
Analysis of SOI CMOS microprocessor´s SEE sensitivity: Correlation of the results obtained by different test methods
791
Analysis of SOI micro ring resonator with reflection property using low coherence interferometry method
792
Analysis of SOI MOSFET physics for compact modeling
793
Analysis of SOI RESURF structure with charge sharing concept
794
Analysis of soil erosion change since “natural forest protection project” beginning in the Hengduan mountain area
795
Analysis of Soil Microstructure Parameters Based on Image Mosaic Technology
796
Analysis of Soil Moisture and Overland Flow Generation Using Cellular Automata and Self-Organizing Feature Maps
797
Analysis of soil moisture detection using ground penetrating radar
798
Analysis of soil physical parameters and their influence on ERS-1 backscatter
799
Analysis of soil pressure on the top surface of high embankment culvert
800
Analysis of Soil Resistivity Test Methods in Two-Layer Earth
801
Analysis of Soil Resistivity Test Methods in Two-Layer Earth
802
Analysis of soil roughness measurements using a 25 m laser profiler and a 4 m wide meshboard
803
Analysis of soil texture using TERRASAR X-band SAR
804
Analysis of Soil Wetness Variations Using AMSR-E Data in Huaihe River Basin
805
Analysis of Sojourner´s Six-Wheeled Rocker Suspension Appended with Driving Moment
806
Analysis of Solar Aided Steam Production in a Pulverized Coal Boiler
807
Analysis of Solar Array Performance Degradation During Simulated Flashover Discharge Experiments on a Full Panel and Using a Simulator Circuit
808
Analysis of Solar Auto-tracking System Kinematics and Static Force
809
Analysis of solar based closed loop DC-DC converter using PID and fuzzy logic control for separately excited motor drive
810
Analysis of solar cell quality using voltage metrics
811
Analysis of solar degradation to TDRS S-band phased array antenna
812
Analysis of solar generation and weather data in smart grid with simultaneous inference of nonlinear time series
813
Analysis of solar inverter THD according to PWM´s carrier frequency
814
Analysis of solar irradiance intermittency mitigation using constant DC voltage PV and EV battery storage
815
Analysis of solar liquid desiccant air-conditioning in hot-humid regions
816
Analysis of solar panel orientation in low altitude satellites
817
Analysis of solar photovoltaic array configurations under changing illumination conditions
818
Analysis of solar photovoltaic array under partial shading conditions for different array configrations
819
Analysis of solder bump electromigration reliability
820
Analysis of solder bump position affecting stress performance by the finite element method
821
Analysis of solder joint Edge Effect in Acoustic Micro Imaging of microelectronic packages: A preliminary study
822
Analysis of Solder Joint Failure Criteria and Measurement Techniques in the Qualification of Electronic Products
823
Analysis of solder joint fracture under mechanical bending test
824
Analysis of Solder Paste scooping with hierarchical point processes
825
Analysis of soldering processes using in-situ X-Ray observations
826
Analysis of solid microparticle influence on spacecraft solar arrays
827
Analysis of solid propellant combustion behavior under electrothermal plasma injection for ETC launchers
828
Analysis of Solidification Heat Transfer Process on Double-Convection Condition
829
Analysis of solid-rotor induction machine
830
Analysis of soliton complexes in high power fiber lasers
831
Analysis of soliton fission induced by free-carriers
832
Analysis of soliton in-line regeneration through two-wavelength nonlinear loop mirror as synchronous amplitude/phase modulator
833
Analysis of soliton pulse train generation using step-like dispersion profiled optical fiber
834
Analysis of soliton synchronous modulation through dual-control nonlinear optical loop mirrors
835
Analysis of soliton transmission in optical fibers with the soliton self-frequency shift being compensated by distributed frequency dependent gain
836
Analysis Of Sollions In A Monornode Optical Fiber By The Inverse Scattering Method
837
Analysis of solution searching algorithms on the model of functional relations
838
Analysis of solutions to the Euler equations with damping
839
Analysis of some CFAR detectors in nonhomogenous environments based on switching algorithm
840
Analysis of some digital transmission systems for analog signals (Ph.D. Thesis abstr.)
841
Analysis of Some Electrical Drives with Double-Parametric Perturbation
842
Analysis of some indexes to assess voltage stability of ac/dc transmission systems
843
Analysis of some key parameters in sliding spotlight SAR
844
Analysis of Some Keyword Search Schemes in Encrypted Data
845
Analysis of Some Mating and Collaboration Strategies in Evolutionary Algorithms
846
Analysis of some measurement issues in bushing power factor tests in the field
847
Analysis of some methods for maintaining accuracy in implementation of FFT on fixed point DSP
848
Analysis of Some Modified Cell-Averaging CFAR Processors in Multiple-Target Situations
849
Analysis of some modified ordered statistic CFAR: OSGO and OSSO CFAR
850
Analysis of Some Nonlinear Phenomena in a Transmission Line
851
Analysis of some numerical models of hysteresis loops
852
Analysis of some operation problems of half-wave length power transmission lines
853
Analysis of some parameters influencing moisture quantity measurements in wheat with NIR technique
854
Analysis of some photonic crystal structures by using Bloch wave expansion
855
Analysis of some physiotherapeutic effects on electrical resistance of small area integument
856
Analysis of Some Planar Structures by the Least-Squares Boundary Residual Method
857
Analysis of some portfolio selection models for R&D
858
Analysis of Some Recently Proposed Chaos-based Public Key Encryption Algorithms
859
Analysis of some redundancy removal bandwidth compression techniques
860
Analysis of some techniques to enhance the bandwidth of handset antennas using metallic strips
861
Analysis of Some Techniques Used in Modern LF-VLF Radiation Systems
862
Analysis of Some Three-Dimensional Microstrip Discontinuities in Terms of Frequency
863
Analysis of Sonar Signal Design Alternatives in a Dispersive Medium
864
Analysis of Sonoporation on Cell Membrane by Scanning Electron Microscopy
865
Analysis of sorting algorithms
866
Analysis of sound characteristics originating from the brachial artery in auscultation
867
Analysis of Sound Features for Music Timbre Recognition
868
Analysis of sound field on the autotraveling viaduct
869
Analysis of sound level in the orchestra pit of the National Theatre in Belgrade
870
Analysis of sound propagation in human head for bone-conduction headphones using finite element method
871
Analysis of sound signal of five internal organs based on wavelet packet
872
Analysis of sound signals with high resolution matching pursuit
873
Analysis of sound textures in musical and machine sounds by means of higher order statistical features
874
Analysis of sounds from occluded arteries by using a linear array of microphones
875
Analysis of source bus line current of a 20-inch size LCD panel through magnetic near field measurement
876
Analysis of Source Codes Created by Beginners in Programming Education
877
Analysis of Source Doping Effect in Tunnel FETs With Staggered Bandgap
878
Analysis of Source Localization in Reverberant Environments
879
Analysis of source policy and its effects on TCP in rate-controlled ATM networks
880
Analysis of source policy in rate-controlled ATM networks
881
Analysis of source separation algorithms in industrial acoustic environments
882
Analysis of southern Jiangsu economic growth factors based on grey production function model
883
Analysis of Space and Surface Waves Excitation in Layered Magnetodielectric and Metamaterial Structures in the Context of Radiation and Diffraction Problems
884
Analysis of space charge dynamics in terms of HPC
885
Analysis of space charge effects due to ESD in MEMS
886
Analysis of space charge formation in LDPE in the presence of crosslinking byproducts
887
Analysis of Space Charge Generating Devices for Lightning Protection: Performance in Slow Varying Fields
888
Analysis of Space Charge in Insulating Materials under Non-Uniform Electric Fields
889
Analysis of space coverage in far field UHF RFID systems
890
Analysis of Space Environment Measurement Carried out by the Roscosmos Monitoring System Elements
891
Analysis of space flight data of InP solar cells in EXOS-D orbit
892
Analysis of space manipulators with non-specific reference links
893
Analysis of Space Shift Keying modulation applied to visible light communications
894
Analysis of Space Shuttle Crewmembers´scanning Behavior: Evaluation of the Proposed Cockpit Avionics Upgrade
895
Analysis of Space Shuttle main engine data using beacon-based exception analysis for multi-missions
896
Analysis of space vector modulation technique in inverter-fed fault-tolerant induction motor drive
897
Analysis of space vector modulation techniques applied in voltage source converters of ultrahigh speed induction motor drives
898
Analysis of space vector modulations for three-phase Z-Source / quasi-Z-source inverter
899
Analysis of space–time adaptive processing performance using K-means clustering algorithm for normalisation method in non-homogeneity detector process
900
Analysis of Spaceborne GNSS-R Delay-Doppler Tracking
901
Analysis of spaceborne multi-sensor observations of sea ice for operational applications
902
Analysis of Spaceborne VHF Incidental Noise over the Western Hemisphere
903
Analysis of space-charge wave propagation at semiconductor surface in an MIS structure
904
Analysis of spacecraft antenna farm interaction with equivalent current technique
905
Analysis of Spacecraft Battery Charger Systems
906
Analysis of space-dependent characteristics of motion-compensated frame differences
907
Analysis of space-dependent characteristics of motion-compensated frame differences based on a statistical motion distribution model
908
Analysis of space-frequency coded OFDM with I/Q imbalance
909
Analysis of Space-Periodic Electrostatic Devices
910
Analysis of Space-Space-Space Clos-Network Packet Switch
911
Analysis of space-surface interferometric bistatic radar
912
Analysis of space-time behaviour of electric vehicle potential user and commuter
913
Analysis of space-time block coded spatial modulation in correlated Rayleigh and Rician fading channels
914
Analysis of space-time block codes OFDM systems with the number of antennas and various mobile speeds
915
Analysis of Space-Time Coded and Spatially Multiplexed MIMO Systems with ZF Receivers
916
Analysis of space-time coded block spread systems for CDMA downlink
917
Analysis of space-time coding in correlated fading channels
918
Analysis of space-time coupling in SEA-SPIDER measurements
919
Analysis of space-time pattern in evapotranspiration and meteorological driving factors over the source region of the Yellow River
920
Analysis of space-time tradeoffs in photonic switching networks
921
Analysis of spam mail sent to Japanese mail addresses in the long term
922
Analysis of S-parameters modules sensitivity of waveguide measurement cell for low loss dielectric case
923
Analysis of S-parameters of a coupler based on the partial element equivalent circuit method
924
Analysis of Spark Breakdown Characteristics for Sphere Gaps
925
Analysis of Sparse Matrix-Vector Multiplication Using Iterative Method in CUDA
926
Analysis of sparse recovery in MIMO radar
927
Analysis of Sparse Regularization Based Robust Regression Approaches
928
Analysis of Sparse Representation and PCA fusion methods for Iris and Palmprint biometric features
929
Analysis of sparse representations using bi-orthogonal dictionaries
930
Analysis of sparse trifilar array antenna
931
Analysis of sparse trifilar array antenna
932
Analysis of sparsely sampled phased array antenna for advanced Doppler radar
933
Analysis of Sparsely-Spread CDMA via Statistical Mechanics
934
Analysis of sparse-partial wavelength conversion in wavelength-routed WDM networks
935
Analysis of sparsity based joint SAR image reconstruction and autofocus techniques
936
Analysis of Spatial and Incremental LMS Processing for Distributed Estimation
937
Analysis of spatial and seasonal distribution of power transmission line thermal aging
938
Analysis of spatial and temporal behavior of threedimensional multi-core architectures towards run-time thermal management
939
Analysis of spatial and temporal evolution of regularity maps during ventricular fibrillation
940
Analysis of spatial and temporal stability of airborne laser swath mapping data in feature space
941
Analysis of Spatial and Temporal Variation Characteristics of Atmospheric Aerosol Optical Depth: A Case Study of Chongqing
942
Analysis of spatial autocorrelation and price determinants in hotel room prices
943
Analysis of Spatial Autocorrelation for Traffic Accident Data Based on Spatial Decision Tree
944
Analysis of spatial characteristics for landslides vegetation restoration monitoring by LiDAR surface roughness data and multispectrum imagery
945
Analysis of spatial characteristics of HVDC commutation failure in complex power grid
946
Analysis of spatial characteristics of soil erosion in ErHai Lake Basin based on GIS and RUSLE
947
Analysis of spatial database index technology
948
Analysis of spatial dependencies of endocytic proteins based on temporal random sets
949
Analysis of spatial discretization for electric arc simulations
950
Analysis of spatial distribution of goundwater quality in Huaihe river basin
951
Analysis of Spatial Distribution of Hexagonal Patterns Based on Fourier Spectra and Spatial Correlation Function
952
Analysis of Spatial Domain Image Steganography Techniques
953
Analysis of spatial domain information for footstep recognition
954
Analysis of spatial fading correlation for different antenna array
955
Analysis of spatial filtering approach to decorrelation of coherent sources
956
Analysis of spatial filtering to enhance transmission capability of single mode optical fibers
957
Analysis of spatial harmonics in a polyphase electrostatic induction micromotor
958
Analysis of spatial heterogeneity of agricultural landscape in the lower Yellow river plains based on characteristic scale
959
Analysis of Spatial Multiplexing for Cross-Layer Design of MIMO Ad Hoc Networks
960
Analysis of spatial nonlinear responses in cortical complex cells
961
Analysis of spatial partitioning approaches for image classification
962
Analysis of spatial patterns in tumor imaging data: A method for assessment of tubularity
963
Analysis of Spatial Patterns of Multiple Cropping Systems in Thailand Using Multi-temporal NDVI Data
964
Analysis of spatial pipelining in Opportunistic Large Array broadcasts
965
Analysis of spatial point process characteristics of radar detections in sea clutter region
966
Analysis of spatial qutrit states using position measurements with finite resolution
967
Analysis of Spatial Similarities Between NEXRAD and NLDAS Precipitation Data Products
968
Analysis of spatial smoothing with uniform circular arrays
969
Analysis of Spatial Temperature Distribution in ICs
970
Analysis of spatial temporal plantar pressure pattern during gait in Parkinson´s disease
971
Analysis of spatial transform motion estimation with overlapped compensation and fractional-pixel accuracy
972
Analysis of Spatial Unfairness in Wireless LANs
973
Analysis of spatial variability for the development of reduced lead body surface maps
974
Analysis of spatial variation in the atrial fibrillation frequency from the multi-channel magnetocardiogram
975
Analysis of spatial variation of nuclear morphology in tissue microenvironments
976
Analysis of Spatially and Temporally Overlapping Events with Application to Image Sequences
977
Analysis of Spatially Constrained Reaching Movements in Haptic Environments
978
Analysis of spatially multiplexed channels to demonstrate and measure orbital angular momentum of photons in 62.5µm multimode fiber channels
979
Analysis of spatially-coupled counter braids
980
Analysis of spatially-weighted MSW transducers
981
Analysis of Spatial-temporal Coupling for Urban Travel Demand and Land Use
982
Analysis of spatial-temporal regularization methods for linear inverse problems from a common statistical framework
983
Analysis of spatio-temporal characteristics of urban land cover and its landscape pattern: A case study in NanHai District of Foshan City
984
Analysis of Spatio-temporal Cortical Activity with Artificial Neural Network
985
Analysis of spatiotemporal instability in the presence of simulated Raman Scattering
986
Analysis of Spatiotemporal Patterns in an Infinite-Dimensional Electromagnetic System
987
Analysis of spatio-temporal patterns in associative networks of spiking neurons
988
Analysis of spatio-temporal prediction methods in 4D volumetric medical image datasets
989
Analysis of Speaker Adaptation Algorithms for HMM-Based Speech Synthesis and a Constrained SMAPLR Adaptation Algorithm
990
Analysis of speaker similarity in the statistical speech synthesis systems using a hybrid approach
991
Analysis of SPEC benchmark programs
992
Analysis of Special Interference Methodologies in Satellite Networks
993
Analysis of Special Mode Order Reduction of Large Power System
994
Analysis of Specific Absorption Rate and Current Density in an Energy Transmission System for a Wireless Capsule Endoscope
995
Analysis of specificity of fuzzy sets
996
Analysis of Specified Bit Handling Capability of Combinational Expander Networks
997
Analysis of speckle filtering in polarimetric SAR imagery
998
Analysis of speckle noise contribution on wavelet decomposition of SAR images
999
Analysis of SPECT including Scatter and Attenuation Using Sophisticated Monte Carlo Modeling Methods
1000
Analysis of spectra in reverse overwrite
بازگشت