بر اساس عنوان

1
Development of "Cicada-Resistant" Optical Drop Cable with Protective Ribbon
2
Development of "IISA-ATP" system for in situ microbial activity assessment in deep-sea environment
3
Development of "Patient Robot"; Measurement System of Myocardial Behaviors for the Quantitative Evaluation of the Surgical Robot Technology
4
Development of "Souryu-III": connected crawler vehicle for inspection inside narrow and winding spaces
5
Development Of "The Maple Method"
6
Development of "wedged caisson" as a quay wall structure and its application to Hidaka-port Japan
7
Development of ‘ Green and Clean´ Reaction Media for Inorganic and Organic Nanomaterials
8
Development of ±50kvar DSP-Controlled PWM VSC-Based DSTATCOM with Direct Current Control
9
Development of “ MobileAudiometer ” for Screening using Mobile Phones
10
Development of μ-PIC with resistive cathode
11
Development of ‘Intelligent Pioneer’ unmanned vehicle
12
Development of “dynamic acupoint interior resistance detecting and analyzing system”
13
Development of “Stitch” Super-GTOs for pulsed power
14
Development of & integration of the IC H&CD system configuration in the ITER Tokamak complex and auxiliary buildings
15
Development of “AI-VISION” for fluidized-bed incinerator
16
Development of “IntelligentWorkFlow System” using know-how acquired based on work order
17
Development of “MEL HORSE”
18
Development of ± 500 kVAR DSTATCOM for distribution utility and industrial applications
19
Development of (λ∼9.4µm) GaAs-based quantum cascade lasers
20
Development of (Nb,Ta)3Sn multifilamentary superconductors using Osprey bronze with high tin content
21
Development of .Net based campus tree species management information system
22
Development of /spl delta/B/i-Si//spl delta/Sb and /spl delta/B/i-Si//spl delta/Sb/i-Si//spl delta/B resonant interband tunnel diodes for integrated circuit applications
23
Development of `in house´ software to support product rationalisation and lead time compression
24
Development of `information collection and delivery sensor base system´ for large-scale power systems
25
Development of `Optimal polarimetric contrast enhancement coefficients: OPCEC´ for the analysis or depolarization due to rain, ice and surface scatter utilizing POL-RAD and POL-SAR measurements
26
Development of ~Patient Robot~ ; Training Robot based on Quantitative Analysis of Surgical Technique
27
Development of ´poly-layer´ assembly technology for pulsed magnets
28
Development of {\\hbox {Al}}_{\\scriptscriptstyle 0.8} {\\hbox {Ga}}_{\\scriptscriptstyle 0.2}{\\hbox {As}} Photodiodes for Use in Wide Band-Gap Solid-State Photomultipliers
29
Development of {\\rm L}1_{0} FePt:C (001) Thin Films With High Coercivity and Small Grain Size for Ultra-High-Density Magnetic Recording Media
30
Development of {\\hbox {MgB}}_{2} Powders and Study of the Properties and Architecture of Ex-Situ PIT Wires
31
Development of {\\hbox {Nb/Al-AlN}}_{\\rm x}/{\\hbox {Nb}} SIS Tunnel Junctions for Submillimeter-Wave Mixers
32
Development of \\hbox {Nb}_{3}\\hbox {Sn} Superconducting Coil Manufacture Technology
33
Development of {\\rm Nb}_{3}{\\rm Sn} Internal Tin Strands With Enhanced Current Capacity and Improved Mechanical Properties
34
Development of {\\rm Nb}_{3}{\\rm Al} Rutherford Cable for High-Field Accelerator Magnet Applications
35
Development of Nb3Al Wires With High Critical Current Density for Future Accelerator Magnets
36
Development of 171Yb optical lattice clock at KRISS
37
Development of 3He MSGC for neutron scattering experiment
38
Development of 3He MSGC for neutron scattering experiment
39
Development of 0.025 mm pitch anisotropic conductive film
40
Development of 0.1-Hz 1-PW Ti:sapphire laser
41
Development of 0.45 mm thick Ultra-Thin Small Outline Package (UTSOP)
42
Development of 0.45-mm thick ultra-thin small outline package
43
Development of 0.5 μm BiCMOS device model library for RFIC applications
44
Development of 0.5 and 0.65 mm pitch QFP technology in surface mounting
45
Development of 0.5 mm thick small outline packages
46
Development of 1 GHz class NMR magnets
47
Development of 1 GHz superconducting NMR magnet at TML/NRIM
48
Development of 1 J, 100 Hz Yb:YAG laser amplifier system for OPCPA pumping
49
Development of 1 kw average power excimer laser with UV preionization
50
Development of 1 min rain rate contour maps for microwave applications in Malaysian Peninsula
51
Development of 1 MV steep-front rectangular-impulse voltage generator
52
Development of 1 MV tandem proton accelerator
53
Development of 1 MW output power level gyrotrons for fusion systems
54
Development of 1 MJ Conduction-Cooled LTS Pulse Coil for UPS-SMES
55
Development of 1.25 eV InGaAsN for triple junction solar cells
56
Development of 1.5D cylindrical HIFU phased array
57
Development of 1.5MVA wind power simulator model using EMTDC program
58
Development of 1.744/spl mu/m distributed feedback laser diode for hydrogen chloride spectroscopy
59
Development of 1.8 K HTS current feedthrough using large-sized YBCO bulk conductors
60
Development of 1/2-in. cassette HDTV VTR incorporating image compression technology
61
Development of 10 Gb/s EPON in IEEE 802.3av
62
Development of 10 KΩ quantum Hall array resistance standards at NMIJ
63
Development of 10 kA Bi2212 conductor for fusion application
64
Development of 10 kA class Nb3Al superconducting cable by jelly-roll process [for fusion magnets]
65
Development of 10 kHz 10 W femtosecond regenerative amplifier
66
Development of 10 Meter Laser Interferometer Gravitational Wave Antenna
67
Development of 10 MW L-Band Multi-Beam Klystron (MBK) for european X-FEL project
68
Development of 10 PW OPCPA Capability on the Vulcan Laser
69
Development of 10 T dipole magnets for the Large Hadron Collider
70
Development of 100 GHz band gyrotron and its application for JT-60U and ITER
71
Development of 100 kVA AC superconducting coil using NbTi cables with a CuSi alloy matrix
72
Development of 100 kVA active filter with digital controlled multiple parallel power converters
73
Development of 100% lattice match buffer layers on RABiTS Ni tapes by sol-gel
74
Development of 1000 AMPERE RMS, 4 KHZ, 1500 volt thyristors and rectifiers
75
Development of 1000-mHz Distance Measuring Equipment
76
Development of 100kCi tritium transport vessel
77
Development of 100-kCi Tritium Transport Vessel
78
Development of 100-nm-thick self-sensing nanocantilevers and characterization of the temperature dependence of the piezoresistivity and conductivity
79
Development of 1060nm 25-Gb/s VCSEL and demonstration of 300m and 500m system reach using MMFs and link optimized for 1060nm
80
Development of 10-day AVHRR composite image data set of Asia
81
Development of 10-days composite NDVI image for Asia using Suomi NPP EDR data
82
Development of 10-gigabit ethernet backbone switch
83
Development of 10-kA Nb/sub 3/Al coil
84
Development of 10kV, 50A, 50kHz High Repetitive Pulsed Power Modulator Based on IGBT Stacks
85
Development of 10kW grid-connected photovoltaic inverter with high frequency transformer
86
Development of 10kW grid-connected photovoltaic inverter with high frequency transformer
87
Development of 10MW L-Band MBK for European X-FEL Project
88
Development of 10-V Josephson series arrays
89
Development of 10-Vrms sampling measurement system using AC-programmable Josephson voltage standard
90
Development of 12 kA HTS Current Lead for Accelerator Magnet Test Application
91
Development of 12 T-10 Al-stabilized Nb3Sn conductor for TMC-II
92
Development of 120 GHz gyrotrons
93
Development of 1200-kV Compressed-Gas-Insulated Transmission and Substation Equipment in the United States
94
Development of 1200-kV Compressed-Gas-Insulated Transmission and Substation Equipment in the United States
95
Development of 120-mm Electro-Thermal Chemical Launcher
96
Development of 120-mm Electro-Thermal Chemical Launcher
97
Development of 125 kV, 5 ns pulse generator for ultra wide band applications
98
Development of 125kW grid-tied PV inverter and research on efficiency vs. transformer turn ratio
99
Development of 128-channel 100 GHz arrayed waveguide grating with pitch conversion waveguide
100
Development of 12GHz TWT for Broadcasting Satellites
101
Development of 13 bit digitally controlled oscillator using fibonacci sequence in 0.18 um CMOS process
102
Development of 1-3 PZT-polymer composite for low frequency acoustical applications
103
Development of 130nm CMOS Monolithic Active Pixels with In-pixel Signal Processing
104
Development of 138 kV transition joint between HPPT cable and extruded cable
105
Development of 13-V, 5000-ADC Power Supply with High-Frequency Transformer Coupling Applied to Electric Furnace
106
Development of 144ch HAPD for aerogel RICH for Belle upgrade
107
Development of 145 kV 3-phases in one enclosure GIS design for minimum outage requirements during maintenance
108
Development of 15 T Cryogen-Free Superconducting Magnets
109
Development of 150 kJ compact pulsed power system for ETC accelerator
110
Development of 150000 r/min, 1.5 kW Permanent-Magnet Motor for Automotive Supercharger
111
Development of 150W S-band GaN solid state power amplifier for satellite use
112
Development of 1550 nm bipolar cascade lasers
113
Development of 1553 mux bus simulation analysis algorithm
114
Development of 16 dots/mm Thermal Printing Head
115
Development of 16-DOF telesurgical forceps master/slave robot with haptics
116
Development of 170 GHz and 110 GHz gyrotron for fusion application
117
Development of 170 GHz electro-optic phase LiNbO3 modulator for millimeter-wave imaging
118
Development of 170 GHz gyrotron for ITER
119
Development of 170 GHz high power gyrotron and transmission line for ECH in JAERI
120
Development of 170 GHz/1 MW/ 50%/CW gyrotron for ITER
121
Development of 1700V hybrid module with Si-IGBT and SiC-SBD for high efficiency AC690V application
122
Development of 170GHz Gyrotron for ITER
123
Development of 18 Track 2 Layer Thin Film Head Using All Dry Process
124
Development of 1-axis torque sensor with different shape of support and measurement spoke
125
Development of 1-inch boiler tube inspection robot
126
Development of 1kJ PW Laser Beamline in SG-II Facility
127
Development of 1kV DC voltage measurement circuit for solar energy system
128
Development of 1kW DMFC system with waste heat recovery for improving energy efficiency
129
Development of 1MV steep-front and longduration square impulse voltage generator
130
Development of 1-MW Inductive Power Transfer System for a High-Speed Train
131
Development of 1-MW long-pulse/CW gyrotrons in 110-170 GHz frequency range
132
Development of 1-ph hybrid active power filter with an efficient FPGA platform for power conditioning
133
Development of 1-ton magnetically suspended vehicle using controlled d.c. electromagnets
134
Development of 2 μm InGaAs radiometer for preflight cross-calibration experiment
135
Development of 2 degree of freedom steer-by-wire hand-wheel actuator control
136
Development of 2 DOF force display system using ER actuators
137
Development of 2 GHz, 1 MW klystron for plasma heating
138
Development of 2 kA high-temperature-superconductor current lead system for AC applications
139
Development of 2 stage bump forming method using wire bonding technique
140
Development of 2" Diameter Co-Cr Video Floppy Disk
141
Development of 2.2 /spl mu/m emission ridge waveguide lasers with low threshold GaInAsSb/GaAlAsSb DH wafers
142
Development of 2.2-/spl mu/m InGaAs photodetectors using molecular beam epitaxy
143
Development of 2.4 GHz RF transceiver front-end chipset in 0.25 μm CMOS
144
Development of 2.4 MJ capacitor bank for electro thermal propulsion technology
145
Development of 2.4 MJ capacitor bank for electro thermal propulsion technology
146
Development of 2.45 GHz waveguide-based air torch system
147
Development of 2.4GHz one-sided directional planar antenna with quarter wavelength top metal
148
Development of 2.4GHz one-sided directional slot antenna with 2-stage bandpass filter
149
Development of 2.4-MJ capacitor bank for electrothermal propulsion technology
150
Development of 2.5MeV neutron spectrometer for helical deuterium plasma experiment
151
Development of 2.5MVAR STATCOM for arc furnace applications
152
Development of 2.5MVAR STATCOM for arc furnace applications
153
Development of 2.7 mil BSF and BSFR silicon wrapthrough solar cells
154
Development of 2.737 Mechatronics at MIT
155
Development of 20 DOF glove type haptic interface device-Sensor Glove II
156
Development of 20 GHz-band on-board power amplifiers
157
Development of 20 liter spherical explosion test apparatus based on LabVIEW and OPC technique
158
Development of 20 MVA static synchronous compensator
159
Development of 20% efficient GaInAsP solar cells
160
Development of 200 meter HoBCO Coated Conductors on Ni-Alloy Textured Substrates
161
Development of 200 watt CW helix traveling wave tube
162
Development of 200kW grid-connected photovoltaic inverter
163
Development of 200kW Grid-connected photovoltaic inverter
164
Development of 200-Mvar class thyristor switched capacitor supporting fault ride-through
165
Development of 20kW energy storage system for Smart Green Town
166
Development of 22 GHz and 70 GHz gyrotrons
167
Development of 22 kv very low-frequency, high-voltage generator and the characteristics of partial discharge in XLPE cables
168
Development of 220 V/300 A Class Non-Inductive Winding Type Fault Current Limiter Using 2G HTS Wire
169
Development of 22KW experimental platform for wind power generation system using SCIG
170
Development of 24 GHz rectennas for Fixed Wireless Access
171
Development of 240 mm bore-13 T superconducting coil for large scale conductor testing
172
Development of 24GHz FMCW level measurement radar system
173
Development of 25- \\mu{\\rm m} -Pitch Microbumps for 3-D Chip Stacking
174
Development of 250kV HVDC XLPE cable system in Korea
175
Development of 25KV high voltage adjustable DC generator
176
Development of 26 GHz band quarter Gbps class Wireless IP Access System aiming to fit NGN
177
Development of 260 GHZ second harmonic CW gyrotron with high stability of output parameters for dnp spectroscopy
178
Development of 275 KV EHV Class Gas-Insulated Power Transformer
179
Development of 275 kV EHV Class Gas-Insulated Power Transformer
180
Development of 275 kV gas cooled type gas-insulated power transformer
181
Development of 275 kV Internally Water-Cooled XLPE Cable
182
Development of 275 kV Internally Water-Cooled XLPE Cable
183
Development of 275 kV Oil-Filled Cable Insulated with Polypropylene Laminated Paper (PPLP)
184
Development of 275 kV Oil-Filled Cable Insulated with Polypropylene Laminated Paper (PPLP)
185
Development Of 275 kV XLPE Cable System And Prospect Of 500 kV XLPE Cable
186
Development of 275 kV XLPE Cable System and Prospect of 500 kV XLPE Cable
187
Development of 275kV metal sheath-less XLPE cable
188
Development of 27MHz/40MHz bands maritime wireless ad-hoc networks
189
Development of 2-channel gait assist electrical stimulator for hemiplegia
190
Development of 2-Chlorophenol Sensor Based on a Fiber Optic Oxygen Transducer via Oxidation Reaction Catalyzed by Tetranitro Iron (II) Phthalocyanine
191
Development of 2D artificial life system using network-type assembly language
192
Development of 2-D Bi-SQUID Arrays With High Linearity
193
Development of 2-D Boron Nitride Nanosheets UV Photoconductive Detectors
194
Development of 2D curve-fitting genetic/gene-expression programming technique for efficient time-series financial forecasting
195
Development of 2-D hydrodynamic code for spherical plasma shell
196
Development of 2D maneuverable robotic fish propelled by multiple ionic polymer-metal composite artificial fins
197
Development of 2-D Meshless Approaches Without Using Integration Cells
198
Development of 2D Modeling Techniques for the Thermal Fatigue Analysis of Solder Joints of a Module Mounted in a 3D Cavity on a Printed Circuit Board
199
Development of 2D Poisson equation C++ finite-difference solver for particle-in-cell method
200
Development of 2D thermal battery model for Lithium-ion pouch cells
201
Development of 2D+T tracking algorithm in ultrasound images for radiotherapy
202
Development of 2DOF Actuation Slosh Rig: A Novel Mechatronic System
203
Development of 2-DOF ankle rehabilitation system
204
Development of 2-DOF powered exoskeleton for upper limb rehabilitation
205
Development of 2-DOF robotic exoskeleton for upper limb rehabilitation after stroke
206
Development of 2GHz band micro LTCC duplexer by combining BPF and diplexer
207
Development of 2-micron lasers for Doppler Iidar wind measurements
208
Development of 2-Phase/4-Phase Flat-Type Vibration Motor
209
Development of 2phase/4phase flat-type vibtration motor
210
Development of 2-position 3-port control valve with self-holding function
211
Development of 2YAC2460 super-heavy vibrating screen
212
Development of 3 dimensional visualization of semiconductor testing
213
Development of 3 DOF jaw robot WJ-2 as a human´s mastication simulator
214
Development of 3 DOF micro finger
215
Development of 3 T class Bi-2212 insert coils for high field NMR
216
Development of 3 terminal devices based on asymmetric, long, YBCO Josephson junctions
217
Development of 3.6 Gbps RF Transceiver for Wireless Nomadic Local Area Networks
218
Development of 30 μm pitch Cu/Ni/SnAg micro-bump-bonded chip-on-chip (COC) interconnects
219
Development of 30 kVA class fully superconducting generator
220
Development of 30 micron pitch bump interconnections for COC-FCBGA
221
Development of 300 mm low-k dielectric for 0.13 μm BEOL damascene process
222
Development of 300 mm TSV interposer with redistribution layers on both sides using MEMS processes
223
Development of 300 MW frequency converter
224
Development of 300/245kV, 80kA Gas Insulated Switchgear
225
Development of 300-kV Air-Insulation Standard Impulse Measurement System
226
Development of 300kW twin torch plasma arc furnace for medical waste treatment
227
Development of 325 MHz Single Spoke Resonators at Fermilab
228
Development of 32-bit Universal Electronic Control Unit UECU32 for Automotive Application
229
Development of 335 mm linear-type atmospheric plasma source for surface treatment
230
Development of 35/53 GHz gyrotrons
231
Development of 350 MHz quarter wave coaxial resonator for power coupler testing
232
Development of 352.2 MHz high power RF test setup
233
Development of 35GHz band passive imaging systems and their applications to medical and bio-objects imaging
234
Development of 35kV 2000A CD HTS cable demonstration project
235
Development of 36-Megawatt Modulators for the Astron 1000-Megawatt Electron Accelerator
236
Development of 36M-pixel micro-CT using digital single-lens reflex camera
237
Development of 38nm Bit-Lines using Copper Damascene Process for 64-Giga bits NAND Flash
238
Development of 3-axis distributed forces sensor for walking analysis
239
Development of 3-axis nano stage for precision positioning in lithography system
240
Development of 3D 4-electrode IPMC actuator with accurate omnidirectional control ability for microendoscopic surgical application
241
Development of 3-D anatomically-detailed mathematical models of the sinoatrial and atrioventricular nodes
242
Development of 3D Beam-Beam simulation for the Tevatron
243
Development of 3D CNTS interdigitated finger electrodes on flexible polymer for bending strain measurement
244
Development of 3D college physics virtual experiments based on 3DSMAX
245
Development of 3-D detector system for positron CT
246
Development of 3D detectors for very high luminosity colliders
247
Development of 3D dynamic acquisition in a neuro-PET scanner
248
Development of 3-D electromagnetic field intensity measurement system using infrared 2-D lock-in amplifier
249
Development of 3D Electromagnetic PIC Simulation Code for Magnetron
250
Development of 3-D electron beam models for transverse-wave devices
251
Development of 3D endoscope for minimum invasive surgical system
252
Development of 3D finite-element charged-particle code with adaptive meshing
253
Development of 3-D focused-ion-beam (FIB) etching methods for nano- and micro-technology application
254
Development of 3D human tissues phantoms for analysis of frequency dispersion and human body interaction at 60GHz
255
Development of 3D hyperspectral camera using compressive sensing
256
Development of 3d landslide dynamic modeling based on DSAF integration system
257
Development of 3D laser range finder system for object recognition
258
Development of 3D laser scanner for measuring uniform and dense 3D shapes of static objects in dynamic environment.
259
Development of 3D measurement system using digital holography
260
Development of 3D Microfluidic Device to Study Endothelial-to-Mesenchymal Transformation
261
Development of 3-D Modified Proportional Navigation Guidance Law against High-Speed Targets
262
Development of 3-D phased array applicator for deep-body hyperthermia: FDTD modeling and experimental verification
263
Development of 3-D position measurement method for a round hole
264
Development of 3D printed biomimetic scaffold for tissue engineering
265
Development of 3D printer with integrated temperature control system
266
Development of 3-D quantum biomechanical models of a single particle movement through a channel and a single channel current
267
Development of 3-D read/write simulation system for higher areal recording density
268
Development of 3-D robot vision sensor
269
Development of 3-D robot vision sensor with fiber grating: Fusion of 2-D intensity image and discrete range image
270
Development of 3D scanning algorithms
271
Development of 3D shadow mask using 3D printer
272
Development of 3D shape evaluation system for collaboration support in virtual space
273
Development of 3-D shapes estimation by using single X-ray image
274
Development of 3-D silicon die stacked package using flip chip technology with micro bump interconnects
275
Development of 3D silicon module with TSV for system in packaging
276
Development of 3-D Silicon Module With TSV for System in Packaging
277
Development of 3-D simulation model for laser material processing
278
Development of 3D simulation system for multi-axis turn-mill machining
279
Development of 3D sound generation system for multimedia application
280
Development of 3D sound simulation system for flight simulator
281
Development of 3D space partitioning and design rule check for smart system solutions
282
Development of 3D space-sharing interface using augmented reality technology for domestic tele-echography
283
Development of 3D stack package using silicon interposer for high power application
284
Development of 3-D Stack Package Using Silicon Interposer for High-Power Application
285
Development of 3-D stereo endoscopic PACS viewer
286
Development of 3D thermoelectric generators using Bi and Sb elements
287
Development of 3D through silicon stack (TSS) assembly for wide IO memory to logic devices integration
288
Development of 3D tracking detectors in the DCBA experiment for studies of double beta decays
289
Development of 3-D ultrasound system for assessment of adolescent idiopathic scoliosis (AIS): And system validation
290
Development of 3D Virtual Multi-pyramid as a Mathematic Game for Elementary and Middle Schools´ Students
291
Development of 3D Vision Enabled Small-scale Autonomous Helicopter
292
Development of 3D visual feedback system for Cybernic Master System
293
Development of 3D-CFD code for heat conduction process using CUDA
294
Development of 3-dimensional CAD management system software for EPS
295
Development of 3-dimensional GIS running on Internet
296
Development of 3-dimensional memory module using anisotropic conductive adhesive films
297
Development of 3-dimensional module package, “System Block Module”
298
Development of 3-dimensional simulation code for fluxoid dynamics of type II superconductor
299
Development of 3-Dimentional Micro Probe using X-Ray Lithography and High-Strength Electroformed Ni
300
Development of 3D-input device for virtual surface manipulation
301
Development of 3D-input device using adaptive control
302
Development of 3D-LIGA process to fabricate spiral microcoil
303
Development of 3-DOF active rotational ball joint
304
Development of 3-DOF finger module for micro manipulation
305
Development of 3-DOF haptic display device
306
Development of 3-DOF haptic surgical trocar robot using tendon-drive
307
Development of 3-DOF Inchworm Mechanism for Flexible, Compact, Low-Inertia, and Omnidirectional Precise Positioning: Dynamical Analysis and Improvement of the Maximum Velocity Within No Slip of Electromagnets
308
Development of 3D-stacked reconfigurable spin logic chip using via-last backside-via 3D integration technology
309
Development of 3GHz Analog Fiber Optic Link for Ultra-fast Signal Transmission
310
Development of 3-hydroxybutyrate dehydrogenase enzyme biosensor based on carbon nanotubemodified screen-printed electrode
311
Development of 3-inch diameter InP single crystals with low dislocation density using VCZ technique
312
Development of 3kW IPM type wind generator
313
Development of 3-phase 100 kVA orthogonal-core type variable inductor with sinusoidal output
314
Development of 3-Phase 100kVA Orthogonal-Core Type Variable Inductor with Sinusoidal Output
315
Development of 4 × 4 MIMO-OFDM system and test measurement
316
Development of 4 degree-of-freedom ultra-precision stage with millimeter motion range
317
Development of 4 DOF planar macro-micro manipulators system
318
Development of 4 GHz bulk acoustic wave resonators by sputtered Pb(Mn,Nb)O3-Pb(Zr,Ti)O3 thin films
319
Development of 4 T Class MgB2 Bulk Magnets Doped by Ti
320
Development of 4 tesla permanent magnet
321
Development of 4×4 annular ring array based digital transceivers for long distance UWB wireless communications
322
Development of 4×4 full-MIMO channel sounder operating at 11 GHz with 400 MHz bandwidth utilizing software radio architecture
323
Development of 4×4 MEMS optical switch
324
Development of 40 tesla class hybrid magnet system
325
Development of 400 V Solar Array Technology for Low Earth Orbit Plasma Environment
326
Development of 400 Vdc plug and socket-outlet for DC distribution system
327
Development of 400 Vdc power distribution system and 400 Vdc output rectifier
328
Development of 400 W CW Ka-Band Communications Helix-TWT and 1 kW Peak Power Ka-Band Radar Helix-TWT
329
Development of 400-kV Cable in Great Britain
330
Development of 400-Vdc output rectifier for 400-Vdc power distribution system in telecom sites and data centers
331
Development of 40J Class Repetitive Laser Based on Nd-doped Silica Glass
332
Development of 42V Automobile Brushless Alternator with Combined Stator
333
Development of 440-V 800-A Resistive-Type Modular Superconducting Fault Current Limiter With YBCO Tapes
334
Development of 450 kVA triport UPS system
335
Development of 460 GHz and Dual Polarization SIS Mixers for the Submillimeter Array
336
Development of 46-kA Nb/sub 3/Sn conductor joint for ITER Model Coils
337
Development of 48 V starting systems for a two wheeler parallel hybrid
338
Development of 480-fps LED display by use of spatiotemporal mapping
339
Development of 4-axis soft deformable sensor for humanoid sensor flesh
340
Development of 4-channel cardiomagnetic scaner and technical requirements for 9-channel scaner to diagnose the heart abnormalities
341
Development of 4D CAD-based real time progress management system
342
Development of 4-D Time-Controlled Guidance Laws using Singular Perturbation Methodology
343
Development of 4-DOF manipulator using mechanical impedance adjuster
344
Development of 4-DOF Soft-Contact Tactile Sensor and Application to Gripping Operation of Robotics Fingers
345
Development of 4-DOFs carrying robot for identifying work-piece shape and centroid based on CCD
346
Development of 4-DOFs forceps with force sensing using pneumatic servo system
347
Development of 4-GHz flip-chip VCO module
348
Development of 4-Gsps 2-bit ADC with GaAs ICs for radio astronomy
349
Development of 4H-SiC LJFET-Based Power IC
350
Development of 4-inch diameter InP single crystal with low dislocation density using VCZ method
351
Development of 4K driving simulator and Measurement of eye movement and physiological data during the driving
352
Development of 4-quadrant sensorless control of SRM drives over the entire speed range
353
Development of 4-sides buttable CdTe-ASIC hybrid module for X-ray Flat Panel Detector
354
Development of 4-Sides Buttable CdTe-ASIC Hybrid Module for X-ray Flat Panel Detector
355
Development of 4WIS SBW in-wheel drive compact electric vehicle platform
356
Development of 4WS/4WD Experimental Vehicle: platform for research and education in mechatronics
357
Development of 5.0 kW, Ku-band traveling-wave tube for communication systems
358
Development of 5.8GHz High Power Active Integrated Antenna Arrays
359
Development of 5.8GHz SiGe BiCMOS direct conversion receivers
360
Development of 50 Hz disc-type superconducting coil
361
Development of 50 mm diameter non-polar gallium nitride substrates for device applications
362
Development of 500 KV Cross-Linked Polyethylene Insulated Power Cable
363
Development of 500 KV Cross-Linked Polyethylene Insulated Power Cable
364
Development of 500 kV DC PPLP-insulated oil-filled submarine cable
365
Development of 500 KV DC Self-Contained Oil-Filled Cable
366
Development of 500 KV DC Self-Contained Oil-Filled Cable
367
Development of 500 KV Gas Spacer Cable Part I Characteristics of Current Carrying Capacity
368
Development of 500 kV low density polyethylene insulated cable
369
Development of 500 kV Self-Contained Oil-Filled Cable for Outgoing Lines from Power Plants
370
Development of 500 kV Submarine O.F. Cable
371
Development of 500 meter vegetation continuous field maps using MODIS data
372
Development of 500 MHz multi-channel readout electronics for fast radiation detectors
373
Development of 500 MHz Multi-Channel Readout Electronics for Fast Radiation Detectors
374
Development of 500 W Ka-band helix-TWT and 200 W Q-Band helix-TWT for communications applications
375
Development of 500KV Gas Insulated Switchgear and its Application
376
Development of 500-kV XLPE cables and accessories for long distance underground transmission line. III. Electrical properties of 500-kV cables
377
Development of 500-kV XLPE cables and accessories for long distance underground transmission line-Part I: insulation design of cables
378
Development of 500-kV XLPE cables and accessories for long distance underground transmission lines-Part II: jointing techniques
379
Development of 500-kV XLPE cables and accessories for long-distance underground transmission lines. IV. Electrical properties of 500-kV extrusion molded joints
380
Development of 500-kV XLPE cables and accessories for long-distance underground transmission lines. V. Long-term performance for 500-kV XLPE cables and joints
381
Development of 50J class repetitive laser based on Nd-doped silica glass
382
Development of 50J Class Repetitive Laser Based on Nd-doped Silica Glass
383
Development of 50J Class Repetitive Laser Based on Nd-doped Silica Glass
384
Development of 50kV air-core transformer for electron gun static power source of 3MeV DC accelerator
385
Development of 50-kW Isolated DC/DC Converter with High-Voltage IGBTs
386
Development of 50kW traction induction motor for electric vehicle (EV)
387
Development of 50kWh-class superconducting flywheel energy storage system
388
Development of 50mm Flipchip Plastic Ball Grid Array Package with Low-K Silicon Technology
389
Development of 52W CW spectral beam combined fiber laser source
390
Development of 550 kV 1-break GCB. II. Development of prototype
391
Development of 550 kV 63 kA one-break gas circuit breaker
392
Development of 550 kV and 362 kV synchronous switching gas circuit breakers
393
Development of 550 kV-8000 A composite insulator gas bushing
394
Development of 550KV Gas Spacer Cable Part II The Voltage Characteristics and the Construction
395
Development of 5-Axis Friction Stir Welding System
396
Development of 5-cell RF cavity for SPring-8 booster synchrotron
397
Development of 5kWh Flywheel Energy Storage System Using MATLAB/xPC Target
398
Development of 5-year refuelling cycle at Dukovany Nuclear Power Plant, Czech Republic
399
Development of 6.5 kV class IGBT with wide safety operation area
400
Development of 6.6 kV-200 A DC reactor type superconducting fault current limiter
401
Development of 60 cm×120 cm thin film CdTe PV modules
402
Development of 60 GHz front end circuits for high data rate communication systems in Sweden and Europe
403
Development of 60 GHz phased antenna arrays using liquid crystal phase-shifters
404
Development of 60 MVA SVC (static VAr compensator) using large capacity 8 kV and 3 kA thyristors
405
Development of 60 ps rise-time ferrite-loaded coaxial line
406
Development of 60 W C-Band TWT for space
407
Development of 600 Mbps 2×2 MIMO-OFDM baseband and RF transceiver at 5 GHz band
408
Development of 600V-class trench filling SJ-MOSFET with SSRM analysis technology
409
Development of 60-GHz front-end circuits for a high-data-rate communication system
410
Development of 60-GHz Wireless Interconnects for Interchip Data Transmission
411
Development of 60kV Pulse Power Generator Based on IGBT Stacks for Wide Application
412
Development of 60V PMOS for power management applications
413
Development of 622.08 MHz SAWR-based VCO for 10 Gbit Ethernet application
414
Development of 650 nm-emitting VCSELs for cw operation
415
Development of 66 kV and 275 kV Class REBCO HTS Power Cables
416
Development of 66 kV compact triplex-type XLPE cable
417
Development of 66 kV XLPE submarine cable using optical fiber as a mechanical-damage-detection-sensor
418
Development of 66 kV/750 A High-Tc superconducting fault current limiter magnet
419
Development of 6-axis force/moment sensor for a humanoid robot´s foot
420
Development of 6-axis Force/Moment Sensor for Humanoid Robot´s Foot
421
Development of 6-axis force/moment sensor for measuring the fingers´ muscular strength of human
422
Development of 6-DOF haptic interface for tele-micromanipulation systems
423
Development of 6DOF nano-precision stewart platform for nano-milling application
424
Development of 6-DOF wire-driven robotic manipulator for minimally invasive fetal surgery
425
Development of 6-inch Fe-doped InP single crystal by vertical boat method
426
Development of 6kV SiC hybrid power switch based on 1200V SiC JFET and MOSFET
427
Development of 6kV-class SiC-PiN diodes for high-voltage power inverter
428
Development of 7 T Cryogen-free Superconducting Magnet for Gyrotron
429
Development of 7.2 kV - 63 kA advanced puffer gas circuit breaker
430
Development of 7.2 kV-63 kA Advanced Puffer Gas Circuit Breaker
431
Development of 7.75 Ratio Voltage Divider Toward a Precise Measurement of Decade Resistance Based on the AC Quantized Hall Resistance
432
Development of 70 MW class superconducting generators
433
Development of 70 MW class superconducting generators
434
Development of 70 MW class superconducting generators
435
Development of 70 MW class superconducting generators
436
Development of 72/84 kV dead-tank VCB with rated normal current of 3000 A
437
Development of 765kV transformer protection relay
438
Development of 77 GHz millimeter wave passive imaging camera
439
Development of 77 GHz Radar Lens Antennas for Automotive Applications Based on Given Requirements
440
Development of 77 KV 40 MVA Gas-Vapor Cooled Transformer
441
Development of 77 kV 40 MVA Gas-Vapor Cooled Transformer
442
Development of 7-DOF three-fingered robotic hand for industrial work
443
Development of 8 mm digital camcorder system
444
Development of 800 kV gas-insulated switchgear
445
Development of 800 MHz band SAW filters using weighting for the number of finger pairs
446
Development of 800kW energy storage system for Smart Renewable
447
Development of 802.11p testbed - experiences
448
Development of 8m long range imaging technology for generation of wide area colour 3D seafloor reconstructions
449
Development of 9.25MHz Ocean Radar for Measuring Ocean Waves
450
Development of 9.5 T NbTi cryogen-free magnet
451
Development of 900 MW coal-fired generating units
452
Development of 900MHz band one-sided directional antenna on flexible substrate
453
Development of 90Nm InGaAs HEMTs and Benchmarking Logic Performance with Si CMOS
454
Development of a
455
Development Of A "Higher-Level" Microprogramming Language Using A Compiler-Compiler
456
Development of a "Neuro-orthosis" for the Control of Wrist Movements in Patients with Carpal Tunnel Syndrome: Preliminary Results
457
Development of a "smart" crossed-field amplifier
458
Development of a "true" e-commerce technology course for an MIS or e-commerce program
459
Development of a “Flip Glass Substrate” LED package technology for color bin yield and view angle enhancement
460
Development of a “resistive” readout for SiPM arrays
461
Development of a “steerable drill” for ACL reconstruction to create the arbitrary trajectory of a bone tunnel
462
Development of a “Synchronization Trigger” for the Spanish Oceanographic Ships Based on an Embedded Real-Time Java System
463
Development of a β-tricalcium phosphate ceramic system for in vitro and in vivo release of acetaminophen
464
Development of a “laminated waveguide”
465
Development of a Φ-shaped actuated suspension for 100-kTPI hard disk drives
466
Development of a ±100 MVAr static condenser for voltage control of transmission systems
467
Development of a (3,1) drive multifilm piezopolymer hydrophone
468
Development of a (NbTi)/sub 3/Sn strand for the ITER CS scalable model coil
469
Development of a Ka -Band Wideband Circularly Polarized 64-Element Microstrip Antenna Array With Double Application of the Sequential Rotation Feeding Technique
470
Development of a \\hbox {Nb}_{3}\\hbox {Al} and \\hbox {Nb}_{3}\\hbox {Sn} Subscale Magnet
471
Development of a 171Yb+ microwave frequency standard at the National Measurement Institute, Australia
472
Development of a >1 kV power/energy capacitor for >300°C operation
473
Development of a 0.14THz folded waveguide traveling-wave tube
474
Development of a 0.18-μm CMOS single-chip dual-band receiver for UWB applications
475
Development of a 0.22THz folded waveguide travelling wave tube
476
Development of a 0.33THz pulse gyrotron
477
Development of a 0.34 THz folded waveguide traveling wave tube
478
Development of a 0.5-T/240-mm \\hbox {MgB}_{2} MRI Magnet: Assembly Design and Module Coils
479
Development of a 0.5-THz Waveguide NbN-Based SIS Mixer
480
DEVELOPMENT OF A 1 /spl mu/s, 40 Hz, X-RAY SOURCE
481
Development of a 1 kA, 25-ohm magnetically controlled persistent current switch for SMES
482
Development of a 1 kA, 50 Hz superconducting converter
483
Development of a 1 kW, 200°C Mapham inverter utilizing high temperature components
484
Development of a 1 kWh-class module-type SMES-design study
485
Development of a 1 Mbps low power acoustic modem for underwater communications
486
Development of a 1 MHz MOSFET gate-driver for integrated converters
487
Development of a 1 MJ cryocooler-cooled split magnet with Ag-sheathed Bi2223 tapes for Si single-crystal growth applications
488
Development of a 1 MJ SMES with quench enthalpy protection
489
Development of a 1 MV ultra-fast LTD generator
490
Development of a 1 MVA 3-Phase Superconducting Transformer Using YBCO Roebel Cable
491
Development of a 1 T cryocooler-cooled pulse coil with a Bi2223 superconducting parallel conductor for SMES
492
Development of a 1 T/1 kA-class AC superconducting coil
493
Development of a 1 TW Ti:sapphire laser with sub-20 fs duration
494
Development of a 1 V pulse-driven Josephson voltage standard
495
Development of a 1.0 eV (GaIn)(NAs) solar cell
496
Development of a 1.2MVA active front end using parallel industrial units
497
Development of a 1.2-MVA self-commutated power supply for a magnet test system
498
Development of a 1.3 GHz, 10 MW, 65% efficiency multi-beam klystron for XFEL
499
Development of a 1.5 micron acetylene stabilised frequency standard and the measurement of its frequency using single Sr/sup +/ standard
500
Development of a 1.5 MVA Universal Converter Module for Traction Drive and Utility Applications
501
Development of a 1.5 MW conventional magnetron via numerical simulation
502
Development of a 1.5 MW gyrotron at 110 GHz
503
Development of a 1.5 MW, Seven Level Series-stacked Converter as an APF and Regeneration Converter for a DC Traction Substation
504
Development of a 1.5μm Er:Yb:glass laser for use in a Coherent Laser Radar
505
Development of a 1.5D, 1536 element ultrasonic array for use with integrated electronics
506
Development of a 1.5kW digital controlled DC-DC converter for Mild Hybrids
507
Development of a 10 kA HTS DC Power Cable
508
Development of a 10 kA-class high-Tc superconducting bus bar
509
Development of a 10 kGy(Si) rad hard controller for mobile robot using COTS
510
Development of a 10 kw 4 mm magnetron
511
Development of a 10 kW CW high efficiency S-band PPM klystron
512
Development of a 10 kW CW high efficiency S-band PPM klystron
513
Development of a 10 kW high power density three-phase ac-dc-ac converter using SiC devices
514
Development of a 10 kW high temperature, high power density three-phase AC-DC-AC SiC converter
515
Development of a 10 kW reflective dish PV system
516
Development of a 10 MHz oscillator working with an LGT crystal resonator: Preliminary results
517
Development of a 10 MW- 201.25 MHz Hollow Beam Klystron
518
Development of a 10 MW hollow beam klystron for the ILC
519
Development of a 10 MW, 91 GHz gyroklystron
520
Development of a 10 MW, L-band multiple beam klystron for TESLA
521
Development of a 10 MW, L-band multiple beam klystron for TESLA
522
Development of a 100 hp synchronous motor with HTS field coils
523
Development of a 100 Joule level XeCl laser pumped by intense relativistic electron beam
524
Development of a 100 kVA SiC inverter with high overload capability of 300 kVA
525
Development of a 100 kW CW, S-Band, PPM focused klystron
526
Development of a 100 mm period hybrid wiggler for the Australian Synchrotron Project
527
Development of a 100 MVA high temperature superconducting generator
528
Development of a 1000-pin fine-pitch BGA for high performance LSI
529
Development of a 100-kV multimegawatt repetition rate gas switch
530
Development of a 100-watt CW traveling-wave amplifier for S-band
531
Development of a 100-watt CW travelling-wave amplifier for s-band
532
Development of a 100-watt, CW traveling-wave tube at Ku band
533
Development of a 10-DOF robotic system for upper-limb power assistance
534
Development of a 10-kilowatt 1700-2400 megacycle CW klystron amplifier
535
Development of a 10-kilowatt 1700-2400 megacycle CW klystron amplifier
536
Development of a 10-kw 4-mm magnetron
537
Development of a 10-kW W-band sheet beam extended interaction klystron (EIK)
538
Development of a 10-m wedged-pole undulator
539
Development of a 10-MW, L-band, multiple-beam klystron for TESLA
540
Development of a 11/12 bit compatible high-voltage D/A converter with output to 40 V
541
Development of a 110 GHz, 1.5 MW gyrotron
542
Development of a 12 cm diameter nozzle for argon Z-pinches on the decade quad
543
Development of a 1200 V, 120 A SiC MOSFET module for high-temperature and high-frequency applications
544
Development of a 125 g quartz flexure accelerometer for the RIMU program
545
Development of a 126kV single-break vacuum circuit breaker and type test
546
Development of a 13.2 kV/630 A (8.3 MVA) High Temperature Superconducting Fault Current Limiter
547
Development of a 13.5 db noise figure, 5-watt C-band traveling wave tube
548
Development of a 13.5-dB noise figure 5-watt C-band traveling wave tube
549
Development of a 1310-nm, coherent laser radar with RF pulse compression
550
Development of a 138-kV superconducting cable termination
551
Development of a 1394 bridge system based on P1394.1
552
Development of a 13-cm-Diameter Permanent-Magnets-Expanding Plasma Source Providing a Supersonic Ion Beam
553
Development Of A 14 Fr. Size Hemopump
554
Development of a 140-GHz 1-MW continuous wave gyrotron for the W7-X stellarator
555
Development of a 15 kV bridge rectifier module using 4H-SiC junction-barrier schottky diodes
556
Development of a 15 kW Motor With a Fixed YBCO Superconducting Field Winding
557
Development of a 15 T/17 T solid state NMR magnet system
558
Development of a 1500Vdc photovoltaic inverter for utility-scale PV power plants
559
Development of a 150-kW, Battery Powered, Rapid Capacitor Charger for a Small Railgun in Burst Mode Operation at 3 RPS
560
Development of a 150-watt direct methanol fuel cell system
561
Development of a 16" UV-ray image intensifier tube
562
Development of a 16.8% Efficient 18-μm Silicon Solar Cell on Steel
563
Development of a 16-bit microprocessor learning system using Intel 8086 architecture
564
Development of a 16-bit microprogrammable computer as a senior course project: a teamwork approach to engineering education
565
Development of a 16-inch UV-ray image intensifier tube
566
Development of a 16-kb/s speech codec for telephone applications
567
Development of a 170 GHz, 500 kW CW gyrotron for testing ITER transmission line components
568
Development of a 170GHz high-power and CW gyrotron for fusion application
569
Development of a 183 GHz radiometer
570
Development of a 183 GHz Subharmonic Mixer
571
Development of a 19 kW CW, L-band klystron for CEBAF
572
Development of a 19 kW CW, L-band klystron for the Continuous Electron Beam Accelerator Facility
573
Development of a 1-dimensional sharing block detector using dual PMTs for PET
574
Development of a 2 degrees of freedom tracking system. Part II: controller design and implementation
575
Development of a 2 degrees of freedom tracking system. Part III: system modeling
576
Development of a 2 degrees of freedom tracking system: design and fabrication of platform
577
Development of a 2 kW CW K-band depressed collector klystron
578
Development of a 2 MW 20000 RPM induction motor drive
579
Development of a 2 ns duration high current electron beam source using CsI coated carbon fibre cathode
580
Development of a 2×2 optical switch using bi-stable solenoid-based actuators
581
Development of a 2.0 eV AlGaInP solar cell grown by OMVPE
582
Development of a 2.4 mm coaxial microcalorimeter for power measurements up to 50 GHz
583
Development of a 2.45-GHz Local Exposure System for In Vivo Study on Ocular Effects
584
Development of a 2.4-GHz, parasitic array antenna for wireless electrocardiograph (ECG) application
585
Development of a 2.4-mm coaxial microcalorimeter for RF and microwave power standards at KRISS
586
Development of a 2.5-Dimensional Particle-In-Cell Code for Efficient High-Power Klystron Design
587
Development of a 2.6-kV light-triggered thyristor for electric power systems
588
Development of a 20 μm pitch high frequency contact probe
589
Development of a 20 GS/s sampler chip in 130nm CMOS technology
590
Development of a 20 T class superconducting magnet with large bore
591
Development of a 20 Tesla Superconducting Magnet
592
Development of a 200 kW traveling wave tube at Ku-band
593
Development of a 200 kW, 60 GHz gyrotron
594
Development of a 200-kV Test Stand and Experimental Study of Optical Triggering Methods for LTD Switches
595
Development of a 20kw power supply module for ballast water treatment systems
596
Development of A 20-MeV Dielectric-Loaded Accelerator Test Facility
597
Development of a 20-pulse AC-DC converter based in three-to-five phases transformer
598
Development of a 21-inch a-Si TFT-LCD
599
Development of a 22 GHz correlating radiometer for the observation of stratospheric water vapor
600
Development of a 22 kV/6.9 kV single-phase model for a 3 MVA HTS power transformer
601
Development of a 220 GHz 50 W sheet beam travelling wave tube amplifier
602
Development of a 220 GHz, 50 W sheet-beam traveling wave tube
603
Development of a 23–230 GHz frequency selective surface for the Microwave Sounder instrument on the MetOp Second Generation mission
604
Development of a 230-Kv 20,000-Mva Oil Circuit Breaker
605
Development of a 233 GHz high-gain traveling wave amplifier
606
Development of a 24×24 CZT-FEE pixel detector block for the CSTD project
607
Development of a 25 kV 1 Amp direct conversion power supply for high power RF applications
608
Development of a 25 MW 30 GHz gyroklystron
609
Development of a 25 W TEM/sub 00/ diode-pumped Nd:YLF laser
610
Development of a 250 kW CW, 4.6 GHz klystron for plasma heating
611
Development of a 250 kW, X-band, Accusweep magnetron
612
Development of a 250kW power conditioning system for molten carbonate fuel cell power generation system
613
Development of a 250kW PV PCS and adaptive MPPT method
614
Development of a 25MW Geothermal Power Plant full scope simulator based on a control system graphical modeling
615
Development of a 27.12 MHz CC-LCF intraluminal applicator for hyperthermia of the esophagus
616
Development of a 2-D Analytical Model for the Electromagnetic Computation of Axial-Field Magnetic Gears
617
Development of a 2D laser scanning system for blood perfusion imaging through curved sections of human forearm
618
Development of A 2D Multistage Depressed Collector Code for TWT
619
Development of a 2D scintillating fiber detector for proton radiography
620
Development of a 2-Degree-of-Freedom Rotational/Linear Switched Reluctance Motor
621
Development of a 2-dimensional multigrid-type MSGC using GLG method for the new generation spallation neutron sources
622
Development of a 2-DOF electrostatic haptic joystick for MRI/fMRI applications
623
Development of a 2DOF Inner Skeleton Robot for Forearm Motion Assist
624
Development of a 2DOF micromanipulation system with IPMC actuators
625
Development of a 2-DOF micro-motion stage based on lever amplifying mechanism
626
Development of a 2-DOF planar ultrasonic motor using longitudinal-bending hybrid transducer
627
Development of a 2-DOF softness feeling display for tactile tele-presentation of deformable surfaces
628
Development of a 2-kW XeCl laser with a surface corona preionization scheme and a spiker-sustainer circuit
629
Development of a 3 \\phi -66/6.9 kV-2 MVA REBCO Superconducting Transformer
630
Development of a 3 cm band reflected power canceller
631
Development of a 3 dimensional package for pressure sensors
632
Development of A 3 kW fuel cell generation system with an active fuel cell simulator: topology, control, and design
633
Development of a 3 T–250 mm Bore \\hbox {MgB}_{2} Magnet System
634
Development of a 3.5-Inch High-Speed and High-Capacity FDD
635
Development of a 3.5-mm Coaxial Microcalorimeter for RF and Microwave Power Standards at KRISS
636
Development of a 3.5-mm coaxial microcalorimeter for RF and microwave power standards at KRISS
637
Development of a 3.7-GHz 750-kW CW Klystron for Tore Supra
638
Development of a 3/spl times/3 micromachined millimeter wave SIS imaging array
639
Development of a 30 GHz, Wireless Lan Transmit/Receive Module
640
Development of a 30 kilowatt heat pipe radiator for cooling a klystron collector
641
Development of a 30 kV ferrite line pulse-sharpening system
642
Development of a 30 kW plasma gun system having semipermanent lifetime
643
Development of a 30 kW Si IGBT based three-phase converter for operation at 200 °C with high temperature coolant in hybrid electric vehicle applications
644
Development of a 300 GHz material processing system
645
Development of a 300 kW 3000 rev/min d.c. machine using thyristor-assisted commutation
646
Development of a 300 kW CW L-band industrial heating magnetron
647
Development of a 300 m 2.4 GHz frequency band leaky coaxial cable for wireless network access
648
Development of a 300kV standard impulse divider with partial response time less than 5 nanosecond
649
Development of a 300-TW Ti:sapphire laser system and X-ray laser research in APRI
650
Development of a 30-GHz high conversion gain analog photoreceiver
651
Development of a 30-kA cable-in-conduit conductor for pulsed poloidal coils
652
Development of a 30-kW Plasma Gun System With a Long Lifetime
653
Development of a 350 MHz, 200 kW CW, multiple beam IOT
654
Development of a 350kW, 10kV Pulse Power Converter for Capacitor Charging
655
Development of a 35-MHz piezo-composite ultrasound array for medical imaging
656
Development of a 36 GHz millimeter-wave BGA package
657
Development of a 3-Cycle High-Voltage Air-Blast Breaker with Interrupting Ratings up to 25,000 Mva [includes discussion]
658
Development of a 3D blood vessel model for the simulation of the minimally invasive surgery
659
Development of a 3D Brain PET Scanner Using CdTe Semiconductor Detectors and Its First Clinical Application
660
Development of a 3D Controller Using LEDs and Sensors
661
Development of a 3D display system for biplane cerebral angiography, using a personal computer (PC) system
662
Development of a 3D distributed carbon nanotubes on flexible polymer for normal and shear forces measurement
663
Development of a 3D finite element particle-in-cell code with adaptive meshing
664
Development of a 3-D forward look electronically scanned sonar system
665
Development of a 3-D GPR simulator using the FDTD method
666
Development Of A 3D Gradient-based Method For Volume Quantitation In SPECT
667
Development of a 3D gradient-based method for volume quantitation in SPECT
668
Development of a 3-D graphics rendering engine with lighting acceleration for handheld multimedia systems
669
Development of a 3D imaging calorimeter in lanthanum bromide for gamma-ray space astronomy
670
Development of a 3D interactive virtual market system with adaptive treadmill control
671
Development of a 3D LADAR system for autonomous navigation
672
Development of a 3D laser scanning system for laser-induced breakdown spectroscopy
673
Development of a 3D mapping using 2D/3D sensors for mobile robot locomotion
674
Development of a 3D measuring system for semiconductor patterned wafers
675
Development of a 3D model based part recognition system for industrial applications: Main challenges
676
Development of a 3D Model for Packed Bed Liquid Chromatography in Micro-columns
677
Development of a 3D Motion Sensor Module
678
Development of a 3D optical measurement system based on fringe projection for facial prosthesis
679
Development of a 3D pointing voice interface using a three-axis microphone array
680
Development of a 3D Position Determination Device using PSD sensor
681
Development of a 3D position sensitive scintillation detector using neural networks
682
Development of a 3D printer and a supervision system towards the improvement of physical properties and surface finish of the printed parts
683
Development of a 3-D Process Technology for Wafer-Level Packaging of MEMS Devices
684
Development of a 3D real time gesture recognition methodology for virtual environment control
685
Development of a 3D reconstruction of blood vessel by positional calibration of ultrasound probe
686
Development Of A 3-D Remote Sensing Radar
687
Development of a 3-D scanning 1.5 μm portable aerosol lidar
688
Development of a 3D simulation which can provide better understanding of trainee´s performance of the task using airway management training system WKA-1RII
689
Development of A 3D Simulator for Metal Nanocrystal (NC) Flash Memories under NAND Operation
690
Development of a 3D Sizing Model for All-Superconducting Machines for Turbo-Electric Aircraft Propulsion
691
Development of a 3D Snake-like Robot: Perambulator-II
692
Development of a 3D vision range sensor equiphase light-section method
693
Development of a 3D-CAD add-in for tolerance analysis and synthesis in micro systems (μ-ToAST)
694
Development of a 3-DOF inchworm mechanism organized by a pair of Y-shaped electromagnets and 6 piezoelectric actuators-design, principle, and experiments of translational motions-
695
Development of a 3-DOF silicon piezoresistive micro accelerometer
696
Development of a 3D-tesla micromixer for bio-applications
697
Development of a 3-fingered hand and grasping unknown objects by groping
698
Development of a 3kW fast battery charger with various charging modes and parallel operation
699
Development of a 3MVA/6kV Advance Power Quality Controller for Substations
700
Development of a 4 DOF exoskeleton robot for elbow and wrist rehab
701
Development of a 4 MW full-size wind-turbine test bench
702
Development of a 4π directional fast neutron detector using tensioned metastable fluids
703
Development of a 4π germanium spectrometer for nuclear data measurements at J-PARC
704
Development of a 4.0mm-outer-diameter PM type stepping motor with a newly structured claw-poles
705
Development of a 4.8-9.6 kbps RELP vocoder
706
Development of a 40 mm bore magnet cross section with high field uniformity for the 6.6T SSC dipole
707
Development of a 40 T compact hybrid magnet
708
Development of a 40 year design life severe duty motor
709
Development of a 400 m YBCO racetrack coil for HTS machine applications
710
Development of a 400 watt 8.0-12.4 GHz traveling wave tube for airborne ECM applications
711
Development of a 402.5 MHz 140 kW Inductive Output Tube
712
Development of a 40kV Series-connected IGBT Switch
713
Development of a 40-stage distributed energy railgun
714
Development of a 40-year design life severe duty motor
715
Development of a 413 MW railway power supply converter
716
Development of a 45 GHz multiple-beam antenna for military satellite communications
717
Development of a 45 kVA Single-Phase Model HTS Transformer
718
Development of a 450A/600V 6-in-1-package intelligent power module (IPM)
719
Development of a 4D digital phantom for tracer kinetic modeling and analysis of dynamic perfusion PET and SPECT simulation studies
720
Development of a 4-DOF SCARA robot with 3R1P for pick-and-place tasks
721
Development of A 4kV EMP generator based on break over diode
722
Development of a 4-layer low cost flip chip packaging technology
723
Development of a 4WD omnidirectional wheelchair
724
Development of a 5 DOF prosthetic arm for above elbow amputees
725
Development of a 5 GHz band realtime wireless sensing system with low power consumption for sensor networks
726
Development of a 5 MHz frequency difference pre-multiplier for a short term frequency stability bench of the oscillators
727
Development of a 5 MVA Superconducting Generator Testing and Evaluation
728
Development of a 5 T HTS insert magnet as part of 25 T class magnets
729
Development of a 50 A-fast response, magnetically controlled persistent current switch
730
Development of a 50 GHz coaxial direct comparison transfer microwave power sensor calibration system at NMC
731
Development of a 50 kw cw L-band rectangular window for Jefferson Lab FEL cryomodule
732
Development of a 50 kW, high efficiency, high power density, CO-tolerant PEM fuel cell stack system
733
Development of a 50 MW 30 GHz Gyroklystron
734
Development of a 50 MW 30 GHz gyroklystron
735
Development of a 50 MW PPM
736
Development of a 50 Watt Q-band mini TWT
737
Development of a 500 kV transmission line arrester and its characteristics
738
Development of a 500 W/1 MHz resonant power supply
739
Development of a 500 Watt portable thermophotovoltaic power generator
740
Development of a 5000 Meter Remote Operated Vehicle for Marine Research
741
Development of a 500-GHz band SIS mixer
742
Development of a 500kJ Pulsed Forming Network for EML System
743
Development of a 500kV Airblast HVDC Circuit Breaker
744
Development of a 500kV Airblast HVDC Circuit Breaker
745
Development of a 500-kW Modular Multilevel Cascade Converter for Battery Energy Storage Systems
746
Development of a 500-kW Modular Multilevel Cascade Convertor for battery energy storage systems
747
Development of a 500-watt CW traveling-wave tube at S/C band
748
Development of a 50-60 Hz thermally switched superconducting rectifier
749
Development of a 50mhz optical fibre hydrophone for the characterisation of medical ultrasound fields
750
Development of a 50mm dual Flip Chip Plastic Land Grid Array package for server applications
751
Development of a 55 kW 3X dc-dc converter for HEV systems
752
Development of a 557 GHz GaAs monolithic membrane-diode mixer
753
Development of a 56 mm aperture superconducting dipole model magnet for LHC
754
Development of a 5-DOF Controlled, Wide-Bandwidth, High-Precision Maglev Actuator for Micro Electrical Discharge Machining
755
Development of a 5-DOF walking robot for Space Station application: overview
756
Development of a 5kW scaled prototype of a 2.5 MW Doubly-fed induction generator
757
Development of a 5T 2G HTS Magnet With a 20-cm-Diameter Bore
758
Development of a 6 degree of freedom robotic micromanipulator for use in 3D MEMS microassembly
759
Development of a 6 Plex PCR for Simultaneous Detection of Salmonella Enteritidis and Shiga Toxin-Producing Escherichia coli O157
760
Development of a 6.6 kV - 1 MVA Transformerless Loop Balance Controller
761
Development of a 60 \\mu{\\rm m} Deep Trench and Refill Process for Manufacturing Si-Based High-Voltage Super-Junction Structures
762
Development of a 60 GHz MIMO Radio Channel Measurement System
763
Development of a 60 GHz radar for rear-end collision avoidance
764
Development of a 60 GHz Substrate Integrated Waveguide planar diplexer
765
Development of a 60 Hz Power Standard Using SNS Programmable Josephson Voltage Standards
766
Development of a 600 A HTS current lead using modular design
767
Development of A 600 MHz wide bore (89 mm) NMR system using internal tin wires
768
Development of a 60-GHz Bandpass Filter and a Dipole Antenna Using Wafer Transfer Technology
769
Development of a 630 kVA Three-Phase HTS Transformer With Amorphous Alloy Cores
770
Development of a 64×64-pixel ion camera chip for ionic imaging using an unmodified 0.35 μm CMOS technology
771
Development of a 640-Gbit∕s∕port Optical Packet Switch Prototype Based on Wide-Colored Optical Packet Technology
772
Development of a 64-channel front-end ASIC for accurate and robust crystal identification of high-resolution PET detectors
773
Development of a 64kb MRAM and a study on the magnetization reversal in sub-/spl mu/m sized magnetic tunnel junctions
774
Development of a 65nm Cu/low-k Stack Die FBGA Package for SiP Applications
775
Development of a 66 kV-5 kArms Class HTS Power Cable Using REBCO Tapes With High Critical Current
776
Development of a 6600 V/210 V kVA hybrid-type superconducting transformer
777
Development of a 670 GHz extended interaction klystron amplifier
778
Development of a 68-Pin Multiple In-Line Package
779
Development of a 69 kV High-Pressure Gas-Filled Pipe-Type Cable System For an Arctic Environment
780
Development of a 69kV High-Pressure Gas-Filled Pipe-Type Cable System for an Arctic Environment
781
Development of a 6-axis robotic arm controller implemented on a low-cost microcontroller
782
Development of a 6-Channel High- TC SQUID Magnetocardiograph System
783
Development of a 6-d.o.f. direct-drive wrist joint by pneumatic linear actuator drive
784
Development of a 6DOF Exoskeleton Robot for Human Upper-Limb Motion Assist
785
Development of a 6-DOF Force Display System with High Safety and its Application to Rehabilitation
786
Development of a 6-DOF manipulator actuated with a straight-fiber-type artificial muscle
787
Development of a 6-DOF manipulator driven by flexible shaft for minimally invasive surgical application
788
Development of a 6-DOF Rehabilitation Robot and its Software for Clinical Evaluation Based on Virtual Reality
789
Development of a 6GHz resonator by using an AlN diamond structure
790
Development of a 6-T Conduction-Cooled Superconducting Magnet
791
Development of a 7 tesla superconducting wiggler
792
Development of a 7.5 kW YBCO Superconducting Synchronous Motor
793
Development of a 7.5 MVA superconducting fault current limiter
794
Development of a 70 MW class superconducting generator
795
Development of a 72V IPMSM drive system for golf carts
796
Development of a 75 Coulomb triggered vacuum switch
797
Development of a 750GHz Solid State Source
798
Development of a 7-DOF manipulator actuated by straight-fiber-type pneumatic artificial muscle
799
Development of a 7DOF soft manipulator arm for the compliant humanoid robot COMAN
800
Development of a 7-function hydraulic underwater manipulator system
801
Development of a 7-Level Medium Voltage Inverter System with PWM Converter for Regenerating Operation
802
Development of a 80 kW, 94 GHz gyroklystron
803
Development of a 85∲115 GHz 90-deg phase shifter using corrugated square waveguide
804
Development of a 90 kW bi-directional DC-DC converter for power dense applications
805
Development of a 90 nm large-scale TEG for evaluation and analysis of signal integrity, yield and variation
806
Development of a 915-MHz Direct-Contact Applicator for Therapeutic Heating of Tissues
807
Development of a 94 GHz imaging radar for use as a navigation sensor
808
Development of a 94GHz passive millimeter wave imaging system for target detection in haze and smoke
809
Development of a articulated robot with the direct-teaching function
810
Development of a aural real-time rhythmical and harmonic tracking to enable the musical interaction with the Waseda Flutist Robot
811
Development of a back-contact, scalable silicon photomultiplier array for PET
812
Development of a backdrivable magnetorheological hydraulic piston for passive and active linear actuation
813
Development of a back-up battery management system - A case study in petroleum development Oman
814
Development of a BACnet-ZigBee gateway for demand response in buildings
815
Development of a balanced scorecard system for the network business of an energy supply enterprise with focus on technical processes
816
Development of a balanced scorecard sytem for the network business of an energy supply enterprise with focus on technical processes
817
Development of a balancing mobile service robot with linear extension structures
818
Development of a ball drive unit using partially sliding rollers — An alternative mechanism for semi-omnidirectional motion —
819
Development of a ball type of underwater robot
820
Development of a Ball-Suspension Assembly for Measuring Speed-Dependent Friction Characteristics of Thin Lubricant Films Coated on Magnetic Disks
821
Development of a barium-free high temperature cesium tacitron
822
Development of a barium-free high-temperature cesium Tacitron
823
Development of a Barrier Discharge in Air in Highly Nonhomogeneous Electric Field Caused by the Residual Dielectric Surface Charges
824
Development of a baseband signal ATI-SAR simulator for ground moving target indication
825
Development of a basic dance training system with mobile robots
826
Development of a batch control system
827
Development of a battery runtime prediction algorithm and a method for determining its accuracy
828
Development of a battery step voltage to determine parameters of large PMG
829
Development of a batteryless sensor transmitter
830
Development of a Bayesian Framework for Determining Uncertainty in Receiver Operating Characteristic Curve Estimates
831
Development of a Bayesian neural network to perform obstacle avoidance for an intelligent wheelchair
832
Development of a Bayesian recursive algorithm to find free-spaces for an intelligent wheelchair
833
Development of a BCI master switch based on single-trial detection of contingent negative variation related potentials
834
Development of a BCI Simulated Application System Based on Unity3D
835
Development of a beam condition monitor for use in experiments at the CERN Large Hadron Collider using synthetic diamond
836
Development of a beam induced heat-flow monitor for the beam dump of the J-PARC RCS
837
Development of a Beam Source Modeling Technique for a Flattening Filter Free (FFF) Beam
838
Development of a beam sweeping system for the Fermilab antiproton source target
839
Development of A Beam-Beam Simulation Code for e+e- Colliders
840
Development of a beam-forming matrix using MMICs for multibeam active phased arrays
841
Development of a beam-pipe HOM absorber for the ATF damping ring
842
Development of a Bed Sensor for an Integrated Digital Home Monitoring System
843
Development of a Bed-Centered Telehealth System Based on a Motion-Sensing Mattress
844
Development of a bedsore prevention system based on LabVIEW
845
Development of a behavior recognition system using wireless wearable information devices
846
Development of a behavioral model of the single-electron transistor for hybrid circuit simulation
847
Development of a benchmark for the interpretation of transformer frequency response analysis results
848
Development of a benchmark to measure system robustness
849
Development of a benchmark to measure system robustness: experiences and lessons learned
850
Development of a Bendable Permanent-Magnet Tubular Linear Motor
851
Development of a Bending Actuator using a Rubber Artificial Muscle and its Application to a Robot Hand
852
Development of a beryllium copper inner leg for the CIT toroidal field coil
853
Development of a best practice model for the implementation of RFID in a healthcare environment
854
Development of a beta skin dose monitor using a silicon detector
855
Development of a B-factory monolithic active pixel detector - the continuous acquisition pixel prototypes
856
Development of a B-Factory Monolithic Active Pixel Detector—The Continuous-Acquisition Pixel Prototypes
857
Development of a Bi-2223 HTS Magnet for 3T MRI System for Human Brains
858
Development of a Bi2223 insert coil for a conduction-cooled 19 T superconducting magnet
859
Development of a biarticular manipulator using spiral motors
860
Development of a bidirectional data communication system using ultra high frequency radio wave for implantable artificial hearts
861
Development of a bi-directional DC/DC converter for inverter/charger applications with consideration paid to large signal operation and quasi-linear digital control
862
Development of a bi-directional off-board level-3 quick charging station for electric bus
863
Development of a bi-directional remote controller protocol and systems for domestic appliances
864
Development of a bilateral rehabilitation training system using the haptic device and inertia sensors
865
Development of a Binary fMRI-BCI for Alzheimer Patients: A Semantic Conditioning Paradigm Using Affective Unconditioned Stimuli
866
Development of a binocular eye tracking system for quality assessment of S3D representations
867
Development of a bio-energy generation system based on microfluidic platform
868
Development of a Biofeedback Therapeutic Exercise Supporting Manipulator for Lower Limbs
869
Development of a Biofeedback Therapeutic-Exercise-Supporting Manipulator
870
Development of a bio-impactor with an adjustable collection distance, effect of Dfs on the CE
871
Development of a bioimpedance-based human machine interface for wheelchair control
872
Development of a bio-inspired vision system for mobile micro-robots
873
Development of a Bio-Inspired Wrist Prosthesis
874
Development of a Bioinstrumentation System in the Interaction between a Human and a Robot
875
Development of a biological sensor bay for the Ranger AUV
876
Development of a biologically inspired hopping robot-"Kenken"
877
Development of a biologically inspired multi-modal wing model for aerial-aquatic robotic vehicles
878
Development of a biomagnetic measurement system for brain research
879
Development of a biomass corrected soil moisture retrieval model for dual-polarization ALOS-2 data based on ALOS/PALSAR and PI-SAR-L2 observations
880
Development of a biomechanical model for the analysis of the wrist extension and flexion movement
881
Development of a biomechanical spine model for dynamic analysis
882
Development of a biomedical tissue differentiation system using piezoelectric actuators
883
Development of a biometric testing protocol for dynamic signature verification
884
Development of a biomimetic eardrum for acoustic sensing
885
Development of a Biomimetic Fin Actuator using Electroconductive Polymer
886
Development of a Biomimetic Hand Exotendon Device (BiomHED) for Restoration of Functional Hand Movement Post-Stroke
887
Development of a Biomimetic Motion Control System Using CPG
888
Development of a biomimetic non-invasive radial pulse sensor: Design, calibration, and applications
889
Development of a biomimetic position sensor for robotic kinaesthesia
890
Development of a biomimetic robotic bear: Or is a bare bear bearable?
891
Development of a biomimetic robotic fish and its control algorithm
892
Development of a biomimetic swimmer
893
Development of a BIONic Muscle Spindle for Prosthetic Proprioception
894
Development of a biophysically detailed model of the rapid-delayed rectifier potassium channel
895
Development of a Bio-Production Execution System for Agricultural Operations Management
896
Development of a biosensor based on a piezoelectric film
897
Development of a biotelemetric heart valve monitor using a 2.45 GHz transceiver, microcontroller, A/D converter, and sensor gain amplifiers
898
Development of a biped humanoid simulator
899
Development of a biped locomotor applicable to medical and welfare fields
900
Development of a Biped Locomotor with the Double Stage Linear Actuator
901
Development of a Biped Robot Based on Dynamic Walking: Design, Simulation and Construction
902
Development of a biped robot with toes to improve gait pattern
903
Development of a biped robot with torque controlled joints
904
Development of a biped walking robot
905
Development of a biped walking robot adapting to a horizontally uneven surface
906
Development of a biped walking robot compensating for three-axis moment by trunk motion
907
Development of a biped walking robot having antagonistic driven joints using nonlinear spring mechanism
908
Development of a bipedal humanoid robot having antagonistic driven joints and three DOF trunk
909
Development of a bipedal humanoid robot-control method of whole body cooperative dynamic biped walking
910
Development of a bipedal robot that walks like an animation character
911
Development of a bipolar lithium/cobalt disulfide battery for pulse power
912
Development of a bit-level compiler for massively parallel vision chips
913
Development of a bivalve predation detector by eagle ray (Aetobatus flagellum) and other living organisms
914
Development of a Black Start Decision Supporting System for Isolated Power Systems
915
Development of a blackboard shell with context blackboard-based controlloop
916
Development of a blazed reflection grating with enhanced bandwidth and angular range giving circularly polarised backscattering
917
Development of a blimp robot consisting of four-divided envelopes with four propellers
918
Development of a blood pressure monitoring system for home health application
919
Development of a bluetooth 4.0 PPG sensor for use in Heart Rate Variability analysis
920
Development of a Bluetooth CORBA Based Intelligent Infrastructure for Multi-user Urban Environments
921
Development of a Bluetooth Intelligent Multi-user Environment Based on Wireless CORBA
922
Development of a board-level integrated silicon carbide MOSFET power module for high temperature application
923
Development of a body joint angle measurement system using IMU sensors
924
Development of a body protection orthosis by using silicon outer fence mold actuator
925
Development of a Body Sensor Network to Detect Motor Patterns of Epileptic Seizures
926
Development of a Body Shield for Small Animal PET System to Reduce Random and Scatter Coincidences
927
Development of a bolt-clamped Langevin-type transducer for operation at a high frequency of 80 kHz
928
Development of a bond graph based model of computation for SystemC-AMS
929
Development of a bone cutting robot for total knee arthroplasty
930
Development of a bone-mimicking phantom and measurement of its acoustic impedance by the interference method
931
Development of a boost converter for PV systems based on SiC BJTs
932
Development of a boost converter topology for a high repetition pulsed power generator
933
Development of a bore-head GPR for Horizontal Directional Drilling (HDD) equipment
934
Development of a borehole deployable remotely operated vehicle for investigation of sub-ice aquatic environments
935
Development of a BPM lock-in diagnostic system
936
Development of a Braille Display using Piezoelectric Linear Motors
937
Development of a brain computer interface for delivery of non-invasive brain stimulation during visuomotor task performance - a method study
938
Development of a Brain PET System, PET-Hat: A Wearable PET System for Brain Research
939
Development of a Brain-Computer Interface system based on sensorimotor rhythms
940
Development of a Brake Control System for a Series Hybrid Electric City Bus Using Fuzzy Logic
941
Development of a brand new system using RFID combining with wireless sensor network (WSNs) for real-time doze alarm
942
Development of a brazed-helix TWT for future Ka-band earth stations delivering 200 W in the band 27.5-30 GHz
943
Development of a bridge transport system with telescopic motion
944
Development of a Bridge Weigh-in-Motion Sensor: Performance Comparison Using Fiber Optic and Electric Resistance Strain Sensor Systems
945
Development of a bright display Electrical Energy Meter using ATmega8 architecture
946
Development of a broad landscape monitoring system using hyperspectral imagery to detect pest infestation
947
Development of a Broadband Coplanar Waveguide-to-Microstrip Transition With Vias
948
Development of a Broadband ESPAR Antenna Utilizing the Genetic Algorithms Technique
949
Development of a broadband high power optical parametric chirped pulse amplification system
950
Development of a broadband hollow beam, modulating anode L-band klystron at the multi-megawatt level
951
Development of a broadband HOM load for the 714-MHz HOM-damped cavity
952
Development of a broadband matching network for Electro-Absorption Modulators
953
Development of a broadband noise primary standard in coaxial technology
954
Development of a broadband output circuit for a Ku-band Extended Interaction Klystron
955
Development of a Broadband Reflective Array 10,000:1 Pulse Compression Filter
956
Development of a broadband shot noise measurement system at low-temperature for noise thermometry
957
Development of a broadband spectroradiometer
958
Development of a Broadband Triboelectric Energy Harvester With SU-8 Micropillars
959
Development of a broadband underwater sound projector
960
Development of a broadband W-band gyro-TWT amplifier
961
Development of a broadband Wilkinson power combiner on Liquid Crystal Polymer
962
Development of a Broadband, Low Loss 1000:1 Dispersive Filter
963
Development of a broadly tunable mid-infrared laser source for highly sensitive multiple trace gas detection
964
Development of a broadly-tunable continuous-wave, mode-hop-tuned, PPLN OPO for chemical sensing application
965
Development of a broad-view camera system for minimally invasive surgery
966
Development of a brushless doubly-fed machine for a limited-speed pump drive in a waste-water treatment plant
967
Development of a BS digital broadcast receiver
968
Development of a built-in analog-to-digital converter for a X-ray astronomy detector with the SOI CMOS technology
969
Development of a Burn-in and Test Process for Producing Known-Good-Die
970
Development of a burn-in time reduction algorithm using the principles of acceleration factors
971
Development of a burst model for speech transmission with cell losses in an ATM network
972
Development of a burst voltage measurement system for high-resolution contact resistance tests of thermoelectric heterojunctions
973
Development of a business case template for organizational-level testers
974
Development of a business process modeling methodology and a tool for sharing business processes
975
Development of a C∞-continuous small-signal model for a MOS transistor
976
Development of a C∞-continuous small-signal model for a MOS transistor in normal operation
977
Development of a cable dynamics module for the flow solver CFDShip-Iowa
978
Development of a CAD integrated DFE workbench tool
979
Development of a CAD tool for 3D-FPGAs
980
Development of a caesium fountain primary frequency standard at the NPL
981
Development of a calcium sensitive fluorescence sensor as medical device
982
Development of a calculable capacitor
983
Development of a calculable potential transformer with a wide ratio error of −10 % to +10 % and its application
984
Development of a calculating system using power supply reliability field data in Japan
985
Development of a calculator for Edge and Parallel Coupled Microstrip band pass filters
986
Development of a calibration procedure for contactless torque and temperature sensors based on SAW resonators
987
Development of a calibration standard of the spectral radiance for optical sensors
988
Development of a calibration system for a magnetic field-strength standard by feederless loop antennas
989
Development of a calibration system for magnetic field standard by feederless loop antennas
990
Development of a calibration system of digital recorders for impulse tests
991
Development of a Calibration Workstation for Sir-C
992
Development Of A Calorimeter Technique Based On Scintillating Tiles With Wave-shifting Optical Fiber Readout
993
Development of a Camber Measurement System in a Hot Rolling Mill
994
Development of a camera system for identifying tagged fish species
995
Development of a camera tube for night viewing having high-gain pre-amplifier stage of the electron-bombardment-induced-conductivity type
996
Development of a camera tube for night viewing having high-gain preamplifier stage of the electron-bombardment-induced-conductivity type
997
Development of a campus information navigation system based on GIS
998
Development of a cane with a haptic interface using IC tags for the visually impaired
999
Development of a Cantor fractal array
1000
Development of a capacitance altimeter