ليست عنوان مقالات لاتين فني مهندسي Consideration of MIMO in the planning of LTE networks in urban and indoor scenarios Considerations when applying capacitors on distribution systems

<< مقالات لاتين فني مهندسي >>

<< بر اساس عنوان >>

1

Consideration of MIMO in the planning of LTE networks in urban and indoor scenarios

2

Consideration of model of service value structure for Internet information providing services: Proposed multi-value structure layered business model for services

3

Consideration of Mold Compound Cure Shrinkage in Finite Element Modeling

4

Consideration of MOS capacitance effect in TSV modeling based on cylindrical modal basis functions

5

Consideration of motor contribution in series ratings

6

Consideration of motor contribution in series ratings

7

Consideration of Multimedia Teaching Technology and Art Based on Digital Age

8

Consideration of multi-phase criterion in the differential protection algorithm for high-impedance grounded synchronous generators

9

Consideration of multiplexing in neural network hardware

10

Consideration of multi-state generating unit models in composite system adequacy assessment using Monte Carlo simulation

11

Consideration of multi-state weather models in reliability evaluation of transmission and distribution systems

12

Consideration of Network Selection Criteria on IP Mobility Communications Quality by Real-Time Status and/or Statistical Information

13

Consideration of new magnet wire enamels

14

Consideration of node failures in network-reliability calculation

15

Consideration of noise for efficient energy design of deep submicron VLSI chips

16

Consideration of Nonlinear Noise and its Testing in Frequency Division Multiplex Voice UHF Radio Communication Systems

17

Consideration of nonlinear thermal dispersion variations in dispersion-managed fibers

18

Consideration of Nonuniformity in Elongation of Microstructures in a Mechanically Tunable Microfluidic Device for Size-Based Isolation of Microparticles

19

Consideration of Number of Series Turns in Switched-Reluctance Traction Motor Competitive to HEV IPMSM

20

Consideration of number of via holes for high efficiency GaN based VI-LED design

21

Consideration of off-on-modulatcd reversing clutch servo systems

22

Consideration of operating frequency variation in a constant-on-time synchronous Buck converter

23

Consideration of Operation Composition in Semantic Service Matchmaking

24

Consideration of Opportunity and Human Factor: Required Paradigm Shift for Information Security Risk Management

25

Consideration of optical step frequency reflectometry using band pass sampling

26

Consideration of optimal number of poles and frequency for high-efficiency permanent magnet motor

27

Consideration of optimum sectional waveguide tapers for quasi-optical transmission lines

28

Consideration of parallel and serial coaxial reactors for NOx treatment by nanosecond pulsed power discharge

29

Consideration of parallel reactors for ozone production using nanosecond pulsed power discharge

30

Consideration of parasitic bypass couplings in overmoded cavity filter designs

31

Consideration of PERT assumptions

32

Consideration of Phase-to-Phase Surges in the Application of Capacitor Banks

33

Consideration of Phase-to-Phase Surges in the Application of Capacitor Banks

34

Consideration of photonic and mass-transfer aspects on the performance of a biosensor based on localized surface plasmons on an array of gold cylinders

35

Consideration of photoresist outgassing for MeV ion implantation and cryopump selection

36

Consideration of physical condition in estimation of blood glucose via data mining

37

Consideration of physical constraints for regression line fitting in the task of blind mixed noise variance evaluation on images

38

Consideration of physiological effect of robot assisted activity on dementia elderly by electroencephalogram (EEG): Estimation of positive effect of RAA by neuroactivity diagram

39

Consideration Of Poly-SI Loaded Cell Capacity Limits For Each Of Low-power And High-speed SRAM´s

40

Consideration of poly-Si loaded cell capacity limits for low-power and high-speed SRAMs

41

Consideration of power in a lossless transmission line

42

Consideration of Pre-Filter Bandwidth Optimization for Non-Coherent UWB Receiver

43

Consideration of pressure gradients in electrothermal-chemical (ETC) guns

44

Consideration of primary recoil electron tracks in the spectral response simulation of thin-film-based radiation detectors

45

Consideration of probability of interference between land mobile duplex systems

46

Consideration of pumped storage as a black-start source in Shandong power grid of China

47

Consideration of radial magnetic forces in brushless DC motors

48

Consideration of ramp rate constraints in unit commitment using simulated annealing

49

Consideration of Reactor Configuration of High Yield Ozonizer by Nanosecond Pulsed Power Discharge

50

Consideration of reactors configuration for NOx treatment by nanosecond pulsed power

51

Consideration of receiver interest for IP multicast delivery

52

Consideration of reciprocal mixing in HF OTH radar design

53

Consideration of recovery effects during NBTI measurements for accurate lifetime predictions of state-of-the-art pMOSFETs

54

Consideration of refraction losses for time-domain terahertz computed tomography

55

Consideration of relevance feedback on keyword space for interactive information retrieval

56

Consideration of reliability and life-cycle costs for future airborne radars

57

Consideration of Requirements and Limitations of Relaying and High-Speed Reclosing on Long and Heavily-Loaded Transmission Lines

58

Consideration of Resource Access History for Optimizing Overlay Networks in P2P-Based Resource Discovery

59

Consideration of RF Parameters for PCM Telemetry Systems

60

Consideration of risk and reward in balancing technology portfolios

61

Consideration of risk in the measurement of gross domestic product and its influence on behavioral change

62

Consideration of rotor eccentricity effects in a multi body dynamics simulation using a finite element based circuit model approach

63

Consideration of round off errors in the design of mean square estimators

64

Consideration of sample dimension for ultrasonic levitation

65

Consideration of saturation in analysis of the dynamic stability of power systems

66

Consideration of Scalar Magnetic Hysteresis With the Integral Equation Method

67

Consideration of Scattering Characteristics of a Sandwich Chiral Slab and its Application to Design of Polarisation Conversion Filters

68

Consideration of SCTP selective retransmission under the endpoints time non-synchronization

69

Consideration of sectors for direction of arrival estimation with circular arrays

70

Consideration of Service Time in Placing Clients of Web-Based Services

71

Consideration of Similarity Factors in Integration of FP and SLOC for Software Project Estimation

72

Consideration of Single Machine Cells in Designing Cellular Manufacturing System using a Hybrid Genetic Algorithm

73

Consideration of skin effect in high-voltage coaxial systems under transient and steady-state conditions, and its impact on steep traveling waves

74

Consideration of Soft MIMO Detection for Turbo Codes

75

Consideration of space charge effect on electrical breakdown of poly-p-phenylene sulfide films

76

Consideration of space harmonics in complex finite element analysis of induction motors with an air-gap interface coupling

77

Consideration of stiffness and mass effects of relatively thicker electrodes with Mindlin plate theory

78

Consideration of supporting the multimedia Emergency Services in VoIP

79

Consideration of sustainability in order policies for spare parts

80

Consideration of system of systems and service systems as complimentary approaches for healthcare problems

81

Consideration of target platen materials in plasma immersion ion implantation

82

Consideration of Task Circumstance in Service Matchmaking

83

Consideration of tension limits in joint space for 3 pairs of 6 tendon arms with nonlinear springs

84

Consideration of the `sensory-motor coordination´ to an optic and acoustic stimulation

85

Consideration of the Actual Current-Spreading Length of GaN-Based Light-Emitting Diodes for High-Efficiency Design

86

Consideration of the application of separation in the modeling of capacity and delay and delay performance - [Not availble for publication]

87

Consideration of the application of surface electromagnetic waves in the experiments on the high-power THz FEL

88

Consideration of the Correlation between Beta-angle and Lineament Patterns by Using Polarimetric SAR Images

89

Consideration of the definition of zero state on a scale of positive and negative evaluation

90

Consideration of the effect of pollution on the potential distribution of insulator systems

91

Consideration of the effects of voltage and reactive power constraints on composite system reliability

92

Consideration of the energy transfer mechanisms involved in SPETC ignition systems

93

Consideration of the frequency performance potential of GaAs homojunction and heterojunction n-p-n transistors

94

Consideration of the functional relationship between cortex and motor periphery improves offline decoding performance

95

Consideration of the isolated and mutual coupling among conformal hemispherical microstrip patch antennas

96

Consideration of the Major Factor for Measuring Values of Enterprises on Industrial Secret Leakages in Globalized Stock Market

97

Consideration of the method of image diagnosis with respect to frontal lobe atrophy

98

Consideration of the method of image diagnosis with respect to frontal lobe atrophy

99

Consideration of the Organized Knowledge Sharing in the Emergency Team of the Emergency Medical Service Helicopter

100

Consideration of the relative effect of soil ionisation and mutual interaction of components on the partial lightning current distribution in earth electrode systems

101

Consideration of the relative frequency performance potential of inverted heterojunction n-p-n transistors

102

Consideration of the reliability benefits in pricing transmission services

103

Consideration of the routing performance evaluation method for interconnection network based on the probability model

104

Consideration of the stratigraphy of snow cover in modeling its emissivity in the microwave

105

Consideration of the structure design for thin SOI/MOSFET under and beyond the half micron regime

106

Consideration of the Training Possibility of Upper Extremity in the VR-based Throwing Environment by Physically Challenged Persons

107

Consideration of the transient configurations in the optimal coordination problem of directional overcurrent relays

108

Consideration of the usefulness of microwave propagation prediction methods on air-to-ground paths

109

Consideration of the various error sources in a practical automatic vehicle location system

110

Consideration of the wind and solar generation reactive power capability on grid voltage performance

111

Consideration of the XOR-operation Based Secure Multiparty Computation

112

Consideration of thermal constraints during multichip module placement

113

Consideration of thermal effects in logic simulation

114

Consideration of transcoding using updatable scalability for selective quality video content delivery method

115

Consideration of Transition-Time Variability in Statistical Timing Analysis

116

Consideration of Treatment of the Boundary Between Different Media in Electromagnetic Field Analysis Using the Constrained Interpolation Profile Method

117

Consideration of Tunable Components for Next-Generation Passive Optical Network Stage 2

118

Consideration of UMTS-WLAN seamless handover

119

Consideration of uncertainty for current measurement and development of test data generator for TRV measurment

120

Consideration of use of arrayed transmitting coils in wireless power transfer with magnetically coupled resonance

121

Consideration of User Preference on Internet-based Overlay Network

122

Consideration of velocity saturation in the design of GaAs varactor diodes

123

Consideration of vertical resolution for near nadir-looking spaceborne radar

124

Consideration of voltage sags disruption risks in distribution planning studies

125

Consideration of Volterra Series With Excitation and/or Impulse Responses in the Form of Dirac Impulses

126

Consideration of wake turbulence during the integration of Remotely Piloted Aircraft into the air traffic management system

127

Consideration of weight discriminative powers for various weight changes using a haptic device

128

Consideration of wind farm wake effect in power system dynamic simulation

129

Consideration of wind parks operation in the optimal power flow problem

130

Consideration on a formal frame for data mining

131

Consideration on a new BCI method using EEG to detect motion intention

132

Consideration on a power-saving and reliable embedded system

133

Consideration on a service system for knowledge management in scientific laboratories

134

Consideration on accuracy and efficiency of two-scale polarimetric emissivity model used for oceanic passive microwave remote sensing

135

Consideration on acoustic scattering by individual fish schools

136

Consideration on addressing in ubiquitous space using fuzzy measure

137

Consideration on alignment of whisker in unidirectional whisker reinforced micropart produced by UV laser photopolymerization

138

Consideration on and compensation for violations of the constant luminance principle for EDTV

139

Consideration on beam scanning antenna using vertical strip transmission line radiator at 600Hz

140

Consideration on Call Processing Function Distribution to Subscriber Terminal

141

Consideration on College English Teaching Model under Information Age

142

Consideration on common channel signaling evolution for global intelligent networking

143

Consideration on contactless power station with selfctive excitation to moving robot

144

Consideration on cooperation of multiple autonomous mobile robots-introduction to modest cooperation

145

Consideration on Cordless Power Station-contactless power transmission system

146

Consideration on Current and Coil Block Placements With Good Homogeneity for MRI Magnets Using Truncated SVD

147

Consideration on Damper Cylinder Design for Effectiveness of Superconducting Generator

148

Consideration on decimation factors in multirate adaptive filtering for a time-varying AR model

149

Consideration on design of antenna array with cross radiation pattern

150

Consideration on developments in area of nonlinear network design — In mirror of the international workshop on “Integrated Nonlinear Microwave and Millimeter-Wave Circuits (INMMiC)”

151

Consideration on duplex modes and resource allocation algorithms for MP-MP BFWA networks carrying asymmetric traffic

152

Consideration on efficiency and distortion in a power-factor-corrected constant-voltage constant-current AC power supply having variable capacitance devices

153

Consideration on equivalent mechanical circuits for vibratory gyroscope

154

Consideration on Estimating Subcutaneous Fat Thickness Using Electrical Bio-Impedance Method

155

Consideration on Feedforward Controller Design for Self Servo Track Writer

156

Consideration on function mode design for motion construction

157

Consideration on fundamental characteristic of hydrogen generator system fueled by NaBH4 for fuel cell hybrid electric vehicle

158

Consideration on hierarchical cluster analysis based on connecting adjacent hyper-rectangles

159

Consideration on high-response of a linear DC motor

160

Consideration On High-response Of A Linear DC Motor

161

Consideration on influence of directly modulated DFB LD spectral spread and fiber dispersion in multigigabit-per-second long-span optical-fiber transmission systems

162

Consideration on intensity noise of GaAlAs/GaAs surface emitting laser

163

Consideration on interoperability of different wireless access networks using the IEEE 802.21 approach

164

Consideration on Low Frequency Magnetic Field Noise from Electric Train for Design of Magnetic Shielded Room for Bio-Magnetics Measurement

165

Consideration on mechanical properties of a Redundant Drive manipulator for reducing the endpoint inertia

166

Consideration on modeling, identification and control of double stator windings induction generator DSWIG

167

Consideration on modified gold sequences for optical CDM

168

Consideration on numerical instability of Dirichlet gauge BEM

169

Consideration on optimal microgrid operation based on dual price analysis

170

Consideration on parameter determination of a new model describing dynamic vagal heart rate control in rats

171

Consideration on pattern-separating function in a generalized random nerve net consisting of two layers

172

Consideration on performance of the CMA adaptive array antenna for 16 QAM signals

173

Consideration on radiation from an unbalanced-mode spiral antenna

174

Consideration on radio propagation in cavities

175

Consideration on reactive power service using power flow tracing of electricity

176

Consideration on relationship between load dispatching and load profile clustering: Case study on Romanian market

177

Consideration on robotic giant-swing motion generated by reinforcement learning

178

Consideration on self-commutated converter characteristics for DC power supply

179

Consideration on shape dependence of wake field accelerators

180

Consideration on step duration to assess open-loop static characteristics of the carotid sinus baroreflex in rats

181

Consideration on Stimulative Processing for Queen Ant Strategy in Swarm Intelligence

182

Consideration on successive interference canceller (SIC) receiver at cell-edge users for non-orthogonal multiple access (NOMA) with SU-MIMO

183

Consideration on system capability characteristics of portable 2 Mbps/8 Mcps CDMA with phase continuous QPSK

184

Consideration on systematic analysis and evaluation of energy system efficiency

185

Consideration on the accuracy of fabricating microstructures using UV laser induced polymerization

186

Consideration on the applicability of intermetallic compounds with a large coordination number as thermoelectric materials on the basis of the calculated electronic densities of states

187

Consideration on the characteristics of antennas close to lossy objects

188

Consideration on the cooperation of multiple autonomous mobile robots

189

Consideration on the direction of social security reform in China

190

Consideration on the Dirichlet-gauge boundary element method from topological point of view

191

Consideration on the environmental acceptability and biological effectiveness of the electrochemical disinfection system for ballast water management

192

Consideration on the frequency limitation of Wilkinson power divider with coupled wires in ferrite

193

Consideration on the handling of flexible, brittle and continuous member in fusion splicing robot for optical fiber ribbons

194

Consideration on the improvement of performance characteristics and application of the linear parametric motor

195

Consideration on the measurement of current distribution on bent wire antennas

196

Consideration on the optimum conditions to produce micromechanical parts by photo polymerization using direct focused beam writing

197

Consideration on the performance of kernel adaptive filters for the mixture of linear and non-linear environments

198

Consideration on the producing of high aspect ratio micro parts using UV sensitive photopolymer

199

Consideration on the reform of Chinese Science and Technology System

200

Consideration on the relationship between dielectric breakdown voltage and water content in fatty acid esters

201

Consideration on the risk concept for the operating personnel of power systems

202

Consideration on the scaling of capillary pinch lasers

203

Consideration on three-dimensional visual communication systems

204

Consideration on threshold current density of GaInAsP/InP surface emitting junction lasers

205

Consideration on transient stability assessment using deceleration area by the SIME

206

Consideration on two dimensional constraint codes with honeycomb structure

207

Consideration on unique radiation-tolerance properties of solar cells made with InP-family

208

Consideration on vulnerability handling for control systems

209

Consideration on wave propagation in underground dielectrics

210

Consideration Regarding the Convergence and Stability of an Adaptive Self-Tuning Control System

211

Consideration regarding the offset of the magnetic sensors

212

Consideration related to engineering human development in Thailand focusing on after AEC

213

Consideration to computer generated force for defence systems

214

Consideration to efficiency and fairness: A reasonable method for road allocation — A case study of Gansu Province

215

Consideration to minimize power losses in synchronous rectification

216

Consideration to the operation limit of a field-weakening speed control system for a self-controlled synchronous motor

217

Consideration to the response of FLC using changing the size of variable of consequence membership function

218

Considerations about an HDD-based removable medium and its AT-attachment interface architecture for copyright protection

219

Considerations about an Oracle database multi-master replication

220

Considerations about antenna pattern measurements of 2-D aperture synthesis radiometers

221

Considerations About Channel Filters for a New Carrier Frequency System with Mechanical Filters

222

Considerations about efficient health care management systems

223

Considerations about Gaintracking and EMI in a VLSI Mixed Signal BiCMOS Design - A Case Study

224

Considerations about HTS superconducting transformers

225

Considerations about obtaining some different distinct qualities of protection layer of metallic surfaces by covering in different electric fields

226

Considerations about power system grounding for different soil structure

227

Considerations about pure proportional navigation

228

Considerations about sample-size sensitivity of a family of edited nearest-neighbor rules

229

Considerations about sensorless control of permanent magnet synchronous motors at low speed and standstill for wheel mounted drive of tram

230

Considerations about service differentiation using a combined QoS/QoR approach

231

Considerations about some implementations of drives consisting of AC-motors and various current source inverters particularly an analytical derivation of a torque ripple formula

232

Considerations about the choice of a differintegrator

233

Considerations about the impulse breakdown and power frequency partial discharge inception voltages of insulating liquids

234

Considerations about the influence of colloidal solutions on human energy informational field. Part I: Testing basic method

235

Considerations about the influence of colloidal solutions on human energy informational field. Part II: Testing with GDV Compact Camera

236

Considerations about the influence of some factors related to the geometric characteristics of inclusions on effective permittivity of dielectric mixtures

237

Considerations about the maintenance in electrical networks

238

Considerations about the mechatronical transdisciplinary knowledge paradigm

239

Considerations about the modeling and simulation of air-gap eccentricity in induction motors

240

Considerations about the number of coefficients used in Volterra series models for RF Power Amplifiers

241

Considerations about the tuning of fuzzy logic controllers

242

Considerations about the using of Cadence Software for simulation issues of electrostatic phenomena

243

Considerations about virtual measurement with resistive transducers

244

Considerations above Operations Scheduling Intelligent System

245

Considerations Affecting the Design Philosophy of Solid-State Exciters

246

Considerations Affecting the Licensing of High-Frequency Stations

247

Considerations Affecting the Mitigation of Noise Coupled Between Cable Pairs

248

Considerations after a Short Visit to Russia

249

Considerations against a force compensated coil

250

Considerations and Algorithms for Compression of Sets

251

Considerations and benefits of plasma etch based wafer dicing

252

Considerations and concerns for survivability of the Chicago MSA fiber optic network

253

Considerations and design on apps for elderly with mild-to-moderate dementia

254

Considerations and designs for a space-compatible, DPA-SSPM based space radiation monitor

255

Considerations and evaluation of a mobile telemedicine system with broadband wireless access network in tropical regions

256

Considerations and experiments for stable ship mobile reception of terrestrial digital television waves

257

Considerations and improvement of phosphorescence lifetime measurement systems

258

Considerations and improvements of configuration and protection of a 72 kV mining resistance neutral grounded system

259

Considerations and performance evaluations of shared storage area networks at NASA Goddard Space Flight Center

260

Considerations and practice of objectives and ideologies of data structure teaching

261

Considerations and recommendations for data availability for data analytics for manufacturing

262

Considerations and recommendations for in-service out-of-band testing on live FTTH networks

263

Considerations and requirements for tools supporting mobile teams

264

Considerations and simulations of subfrequency excitation of series integrated resonant tunneling diodes oscillator

265

Considerations and suggestions on improvement of communication network disaster countermeasures after the wenchuan earthquake

266

Considerations and Suggestions on the Interactive Development between Wuhan City Circle and Universities

267

Considerations And Techniques For Assessing The Accuracy Of Remotely Sensed Data

268

Considerations applicable to automatic paralleling of aircraft A-C generators

269

Considerations choosing the optimal equilibrium point on the rotational sphere

270

Considerations concerning a modified Kramer system

271

Considerations Concerning Crone Control on Field-Oriented Induction Motor Drive Systems

272

Considerations for a 4160 V super longwall face

273

Considerations for a Digital Gate Unit in high power applications

274

Considerations for a framework to provide enhanced perception of NLOS threats and targets

275

Considerations for a Long Term Dynamics Simulation Program

276

Considerations for a Long Term Dynamics Simulation Program

277

Considerations for a MILSATCOM SHF DAMA standard

278

Considerations for a multipoint video conference in ATM customer premises networks

279

Considerations for a new generation of mobile multimedia communication systems

280

Considerations for a New Military Radio Relay System

281

Considerations for a new military radio relay system

282

Considerations for a photonic beamformer using an LFM waveform in transmit

283

Considerations for a reliable telecommunication power system at remote facilities utilizing valve regulated lead-acid battery management system technologies

284

Considerations for a requirements engineering process model for the development of systems of systems

285

Considerations for a robust moisture performance of a flip chip in package for lead-free soldering

286

Considerations for a Social and Geographical Framework for Agent-Based Epidemics

287

Considerations for a TSAT quality of service architecture

288

Considerations for a Universal Exchange Language for healthcare

289

COnsiderations for a wide-area power quality monitoring system

290

Considerations for a wide-area power quality monitoring system

291

Considerations for AC railway traction power equipment-cost or performance-contradiction or challenge?

292

Considerations for Accurate Behavioral Modeling of High-Speed SC ΣΔ Modulators

293

Considerations for accurate voxel positioning on a rotating-screen volumetric display system

294

Considerations for acquisition and processing of side scan sonar data by an autonomous submersible

295

Considerations for active condition monitoring in power electronic converters

296

Considerations for adaptive distance relaying

297

Considerations for advanced temperature monitoring of underground power cables

298

Considerations for an analog and mixed-signal computer-aided design tool

299

Considerations for an economic evaluation of AC versus DC technology for paper machine drives

300

Considerations for an economic evaluation of AC vs. DC technology for paper machine drives

301

Considerations for an effective management review of the quality system

302

Considerations for an Efficient Mobile Workforce

303

Considerations for an HBM ESD standard for measuring and testing of magneto resistive heads

304

Considerations for an integrated transport system using linear synchronous motors for ultra-deep level mining

305

Considerations for an international standard on fuzzy logic industrial control

306

Considerations for an organizational memory in software development

307

Considerations for application of electrical submersible pumps for underground coal mine dewatering

308

Considerations for application of electrical submersible pumps for underground coal mine dewatering

309

Considerations for application of mineral insulated electrical resistance heating cable

310

Considerations for Application of RF-over-Fiber to Navy Systems

311

Considerations for applying disk encryptors to environments subject to hostile overrun

312

Considerations for applying IEC standards in short circuit calculations and breaker selections in cogeneration plants

313

Considerations for applying solid state sensors to high density magnetic disc recording

314

Considerations for ATM deployment in the telephony network

315

Considerations for Automated Nap-of-the-Earth Rotorcraft Flight

316

Considerations for automatic link establishment in HF radio systems

317

Considerations for bandwidth adaptation mechanisms in wireless networks

318

Considerations for Believable Emotional Facial Expression Animation

319

Considerations for big data: Architecture and approach

320

Considerations for CDM standards alignment: Analysis of a common hardware solution across different CDM tester models

321

Considerations for cleanroom control in different climatic regions

322

Considerations for cloud data centers: Framework, architecture and adoption

323

Considerations for commoditization factors in flat-screen TV industry

324

Considerations For Compensation By Active Power Filters

325

Considerations for conduction mechanisms under AC high field for low density polyethylene

326

Considerations for connecting renewable generation into bulk supply networks

327

Considerations for corona test specifications

328

Considerations for CPM measurements of fast switching ionizers

329

Considerations for derivation and use of soil moisture data from active microwave satellites at high latitudes

330

Considerations for design of a complex multiplier

331

Considerations for design of a micropositioner for cryogenic accelerators

332

Considerations for Designing a Conduction-Cooled Sample Holder

333

Considerations for designing chipsets for Windows(R) CE systems

334

Considerations for designing fast handoff mechanisms in mobile IPv6

335

Considerations for Developing a Highly Efficient, High-power Shortwave AM Transmitter

336

Considerations for Developing an RF Exposure System: A Review for in vitro Biological Experiments

337

Considerations for Development of New Military Carrier Telephone Systems

338

Considerations for development of new military carrier telephone systems

339

Considerations for differential protection in LV buses

340

Considerations for digital controllers targeted at conducted-noise spectrum-spreading in dc-dc converters

341

Considerations for digital video processing in CCD cameras

342

Considerations for DSP chip implementations of real-time adaptive lattice noise cancelling algorithms

343

Considerations for dynamic transfer of renewable generation between Balancing areas

344

Considerations for efficient contact resistivity reduction via Fermi Level depinning - impact of MIS contacts on 10nm node nMOSFET DC characteristics

345

Considerations for efficient wire/surface modeling

346

Considerations for Establishing an Economical Microwave Communication Link for Developing Countries in the Tropics

347

Considerations for estimating electrode performance in Li-Ion cells

348

Considerations for fast settling operational amplifiers

349

Considerations for fault current testing of optical ground wire

350

Considerations for fault-tolerant network on chips

351

Considerations for forward active mode reliability in an advanced hetero-junction bipolar transistor

352

Considerations for future automotive radar in the frequency range above 100 GHz

353

Considerations for generating up to 10 Mbar magnetic drive pressures with the refurbished Z-machine (ZR)

354

Considerations for generation in an islanded operation

355

Considerations for Generation in an Islanded Operation

356

Considerations for generator ground fault protection in mid size cogeneration plants

357

Considerations for generator ground-fault protection in midsize cogeneration plants

358

Considerations for generator protection during black start conditions

359

Considerations for ground fault protection in medium-voltage industrial and cogeneration systems

360

Considerations for ground-fault protection for low-voltage variable-frequency drive circuits supplied by high-resistance-grounded power-distribution systems

361

Considerations for Hardening MOS Devices and Circuits for Low Radiation Doses

362

Considerations For Hardware Implementations Of Neural Networks

363

Considerations for high data rate recording with thin-film heads

364

Considerations For High Reliability Energy Sources For Nigeria Telecommunication Limited

365

Considerations for higher voltage distribution

366

Considerations for higher voltage distribution

367

Considerations for high-frequency switched-capacitor ladder filters

368

Considerations for high-speed and analog-circuit-compatible I/sup 2/L and the analysis of Poly I/sup 2/L

369

Considerations for high-speed configurable-bandwidth time-interleaved digital delta-sigma modulators and synthesis in 28 nm UTBB FDSOI

370

Considerations for HLA Federations of Communications Simulations

371

Considerations for Implementing a High Level Microprogramming Language Translation System

372

Considerations for implementing a wireless network for landmine detection

373

Considerations for Implementing an IP-Based, Video Assessment and Surveillance System

374

Considerations for implementing high performance VXI test systems

375

Considerations for implementing IEEE 1149.1 on system-on-a-chip integrated circuits

376

Considerations for Implementing Multiterminal DC Systems A Paper Sponsored by Working Group 05.04, Multiterminal DC Systems, of the DC Transmission Subcommittee

377

Considerations for Implementing MV Drives in a Cement Plant

378

Considerations for implementing tag schedules in transmission circuits

379

Considerations for improving the accuracy of large-signal GaAs MESFET models to predict power amplifier circuit performance

380

Considerations for improving the capacity and performance of AeroMACS

381

Considerations for improving the non-intrusive efficiency estimation of induction machines using the air gap torque method

382

Considerations for Improving the Performance of Surface Plasmon Resonance Biosensors

383

Considerations for improving the reliability of the off-site power supply for nuclear generating stations

384

Considerations for installing and applying arc resistant low and medium voltage control equipment in forest products industries

385

Considerations for integrated monitoring of the shallow junction formation process

386

Considerations for integration of a physiological radar monitoring system with gold standard clinical sleep monitoring systems

387

Considerations for intraoperability for aerospace applications

388

Considerations for invstigation and reliablity improvement of SVC systems

389

Considerations for ISDN planning and implementation

390

Considerations for Ku-Band Scatterometer Calibration Using the Dry-Snow Zone of the Greenland Ice Sheet

391

Considerations for life extension of HVDC transmission systems

392

Considerations for light soaking of amorphous silicon photovoltaic modules

393

Considerations for light sources: For semiconductor light sensor test

394

Considerations for load as a virtual generator for grid security

395

Considerations for Lossy-Mode Resonance-Based Optical Fiber Sensor

396

Considerations for low inertia AC drives in machine tool axis servo applications

397

Considerations for low-inertia AC drives in machine tool axis servo applications

398

Considerations for Machine-to-Machine communications architecture and security standardization

399

Considerations for magnetic-field coupling resulting in radiated EMI

400

Considerations for measurement setup for second-order nonlinearity in radio-frequency bulk acoustic wave duplexers

401

Considerations for MEMS packaging

402

Considerations for Microwave Remote Sensing of Ocean-Surface Salinity

403

Considerations for migrating aging military transport aircraft to two person cockpits

404

Considerations for millimeter wave printed antennas

405

Considerations for minimizing radiation doses to components during X-ray inspection

406

Considerations for minimizing radiation doses to components during X-ray inspection

407

Considerations for mixed analog/digital PCB design

408

Considerations for modeling heterojunction transport in solar cells

409

Considerations for modeling MTDC systems in transient stability programs

410

Considerations for Modeling MTDC Systems in Transient Stability Programs

411

Considerations for multi-carrier modulations of parallel-connected five-level PWM inverters

412

Considerations for multicast scalability of fieldbus protocols on IP/Ethernet

413

Considerations for neural network hardware implementations

414

Considerations for new subway tunnels crossing under existing bridge foundations

415

Considerations for Non-cooperative Bistatic SAR with Spaceborne Radar Illuminating

416

Considerations for online deviation detection in medical processes

417

Considerations for Optical Receiver Design

418

Considerations for optical sensor design

419

Considerations for optoelectronic shared cache parallel computers

420

Considerations for package routing for DRAM and NAND Flash memory

421

Considerations for pad-mounted transformer placement

422

Considerations for Performing EHV Switching Surge Field Tests IEEE Working Group on Switching Surges

423

Considerations for Performing EHV Switching Surge Field Tfsts

424

Considerations for performing reverberation chamber immunity testing with frequency stirring

425

Considerations for phase accumulator design for direct digital frequency synthesizers

426

Considerations for phasor measurement unit introduction in distribution system

427

Considerations for Planning a DSP Hardware Class

428

Considerations for polarization insensitive optical switching and modulation using strained InGaAs/InAlAs quantum well structure

429

Considerations for practical conductor design of Chevrel phase wires

430

Considerations for predicting freezeout and exhaustion under a variety of nontrivial conditions

431

Considerations for predicting freezeout and exhaustion under a variety of nontrivial conditions

432

Considerations for quadrature receiver calibration using frequency weighted least squares FIR filter design

433

Considerations for Reconfigurable Multi-Standard Antennas for Mobile Terminals

434

Considerations for reducing stray field of SMES magnets

435

Considerations for remotely monitoring and controlling conveyor belts in underground coal mines

436

Considerations for repair or replacement of AC motors

437

Considerations for Rotating Low-Voltage Machine Insulation Designs

438

Considerations for SAR image quantification unique to orbital systems

439

Considerations for scalable CAE on the SGI ccNUMA architecture

440

Considerations for scaled CMOS source/drains

441

Considerations for scheduling and servicing events using a calendar structure

442

Considerations for security in the OSI architecture

443

Considerations for segment division effects in CSMA/CD LAN systems

444

Considerations for Selecting and Sizing Batteries

445

Considerations for selecting and sizing UPS systems for critical loads

446

Considerations for selection and use of computers in the university engineering environment

447

Considerations for sending a breaker trip command over great distances for the purpose of arc flash mitigation

448

Considerations for Sensor Stabilization Using Stand-Alone GPS Velocity and Inertial Measurements

449

Considerations for Service-Oriented Architecture (SOA) in military environments

450

Considerations for SIMOX low voltage applications

451

Considerations for single event effects in non-planar multi-gate SOI FETs

452

Considerations for Single Event Immune VLSI Logic

453

Considerations for Siting and Design of Underwater Test Ranges

454

Considerations for Sizing Buffers in Optical Packet Switched Networks

455

Considerations for SOA Versioning

456

Considerations for Software Defined Networking (SDN): Approaches and use cases

457

Considerations for source pulses and antennas in UWB radio systems

458

Considerations for stereoscopic 3D video delivery on cable

459

Considerations for STIL data application

460

Considerations for streamlining the FCC equipment authorization program

461

Considerations for successful bobbin molding and design. II

462

Considerations for Successful Cognitive Radio Systems in US TV White Space

463

Considerations for successful enterprise information systems deployment—The case of the Greek School Network

464

Considerations for system development of one-chip video MUSE (HDTV) decoder

465

Considerations for System Development of One-chip video MUSE(HDTV) decoder

466

Considerations for testing and simulation of MIL-STD-1760E/HS1760 avionics interfaces

467

Considerations for the application of a route guidance system in the Greater Toronto Area

468

Considerations for the application of series capacitors to radial power distribution circuits

469

Considerations for the application of series capacitors to radial power distribution circuits

470

Considerations for the Application of Synchrophasors to Predict Voltage Instability

471

Considerations for the application of thyristor controlled series capacitors to radial power distribution circuits

472

Considerations for the assessment of early streamer emission lightning protection

473

Considerations for the calibration of a broadband, isotropic, E-field sensing system

474

Considerations for the configuration and arrangement of valve regulated monobloc batteries in enclosures

475

Considerations for the configuration and arrangement of valve regulated monobloc batteries in enclosures. II

476

Considerations for the Design and Placement of Implantable Annular Slot Antennas for Intracranial Pressure Monitoring Devices

477

Considerations for the Design of a Time Projection Liquid Argon Ionization Chamber

478

Considerations for the design of a tubular motor for an aerospace application

479

Considerations for the design of a tutoring system applied to diabetes

480

Considerations for the design of an SRAM with SOI technology

481

Considerations for the design of antennas embedded in mobile communications devices

482

Considerations for the Design of Asymmetrical Mach–Zehnder Interferometers Used as Polarization Beam Splitters on a Submicrometer Silicon-On-Insulator Platform

483

Considerations for the Design of Mini-games Integrating Hints for Puzzle Solving ICT-Related Concepts

484

Considerations for the design of power electronic modules for hybrid distribution transformers

485

Considerations for the design of switched-capacitor circuits using precise-gain operational amplifiers

486

Considerations For The Design, Production, And Application Of Metal-organic Precursors In Optoelectronic Material Growth

487

Considerations for the development of large scale mobile network management system

488

Considerations for the effective mentoring of STEM women of color faculty at a striving private technical university

489

Considerations for the efficient spectral evaluation of reaction integrals associated with separated domains

490

Considerations for the employment of off-the-shelf equipment in military systems

491

Considerations for the feasible operating range of distributed generation interconnected to power distribution system

492

Considerations for the hardware implementation of a four element digital beamformer

493

Considerations for the implementation of test access points a best practice guide

494

Considerations for the long term reliability of PCBs in harsh environmental conditions

495

Considerations for the operator-robot interface in teleoperation

496

Considerations for the optimal radio astronomy site featuring the square kilometre array as an example

497

Considerations for the Planning of UHVDC Schemes in Southern Africa

498

Considerations for the Planning of UHVDC Schemes in Southern Africa

499

Considerations for the restoration of stochastic degradations

500

Considerations for the Short-Term Stability of Frequency Multipliers

501

Considerations for the stable operation of a power system with increasing wind penetration

502

Considerations for the Systematic Design of Machine Self-Diagnosis

503

Considerations for the use of AC induction motors on variable frequency controllers in high performance applications

504

Considerations for the use of low-cost substrates for MM-wave packaging

505

Considerations for the use of multimedia with scientific and technical information: a case study

506

Considerations for the use of plasma in pre-wire bond applications

507

Considerations for Thermal Stability of Oil Impregnated EHV Condenser Bushings

508

Considerations for Thermal Stability of Oil Impregnated EHV Condenser Bushings

509

Considerations for Transmission Line Design on MCMs using AC Coupled Interconnect with Buried Solder Bumps

510

Considerations for Ultimate CMOS Scaling

511

Considerations for UMTS capacity and range estimation

512

Considerations for upgrading aging military avionics systems with state-of-the-art technology

513

Considerations for use of high pin count, multilayer PBGAs in engineering workstations

514

Considerations for using high-impedance or low-impedance relays for bus differential protection

515

Considerations for using low dielectric constant material as re-passivation layer on 300mm wafer bump process and manufacturing benefits of flip chip package

516

Considerations for VoIP Services in IEEE 802.16 Broadband Wireless Access Systems

517

Considerations for wireless communication at 868MHz

518

Considerations for, and Impact of, the ATE/UUT Interface

519

Considerations in application and selection of unit substation transformers

520

Considerations in application and selection of unit substation transformers

521

Considerations in applying arc resistant low voltage motor control centers in refining environments

522

Considerations in Applying Arc-Resistant Low Voltage Motor Control Centers in Refining Environments

523

Considerations in applying breaker fail protection schemes to industrial and IPP systems

524

Considerations in applying clustering techniques to speaker independent word recognition

525

Considerations in applying D-C traction motors on rectified single-phase power

526

Considerations in applying IEEE Recommended Practice for Protection Coordination in Industrial and Commercial Power Systems - Part I

527

Considerations in Applying Induction Motors with Solid- State Adjustable Frequency Controllers

528

Considerations in Applying Optimal Power Flow to Power System Operation

529

Considerations in applying optimal power flow to power system operation

530

Considerations in applying power bus protection schemes to industrial and IPP systems

531

Considerations in applying power bus protection schemes to industrial and IPP systems

532

Considerations in Applying Ratio Differential Relays for Bus Protection

533

Considerations in applying ratio differential relays for bus protection

534

Considerations in applying rectifiers as a power supply for hot strip mills

535

Considerations in applying short circuit tests for on-site commissioning of ipp mid-size generators

536

Considerations in applying short-circuit tests for on-site commissioning of IPP mid-size generators

537

Considerations in Autism therapy using robotics

538

Considerations in calculating total transfer capability [of power transmission systems]

539

Considerations in charge transfer by transient contact of small particles

540

Considerations in choosing a microprogramable bit-sliced architecture

541

Considerations in control scheme development for fermentation process control

542

Considerations in derating induction motors for applications on variable frequency drives

543

Considerations in Design and Laying a New Undersea Fiber Optic Cable

544

Considerations in design of angle-independent Doppler instruments using diffraction-grating transducers

545

Considerations in Designing Human-Computer Interfaces for Elderly People

546

Considerations in designing power supplies for particle accelerators

547

Considerations in developing a design tool for a relational DBMS

548

Considerations in developing a European framework for ICT professionalism

549

Considerations in Developing and Utilizing Operator Training Simulators

550

Considerations in Developing and Utilizing Operator Training Simulators

551

Considerations in device design and materials selection in organic light emitting diodes

552

Considerations in digital beamformer design

553

Considerations in dynamic time warping algorithms for discrete word recognition

554

Considerations in Engineering Electronic Systems

555

Considerations in engineering parallel multiobjective evolutionary algorithms

556

Considerations in Establishing a Standard for Neutron Displacement Energy Effects in Semiconductors

557

Considerations in Establishing Environmental Sensor Networks

558

Considerations in Establishing Standard of Meckanical Loads on Oil-Circuit-Breaker Bushings

559

Considerations in high-fidelity moving-coil earphone design

560

Considerations in High-Sensitivity Microwave Radiometry

561

Considerations in implementing canary based prognostics

562

Considerations in Klystron Design for Microwave Relay Systems

563

Considerations in Klystron Design for Microwave Relay Systems

564

Considerations in laser zone texture tool design

565

Considerations in low power wireless sensor networks

566

Considerations in maintaining process continuity during voltage dips while protecting motors

567

Considerations in making low-loss measurements around one megacycle

568

Considerations in making microarray cross-platform correlations

569

Considerations in Marine Sand Mining and Beach Nourishment

570

Considerations in Measuring Trace Radionuclides in Soil Samples by L X-Ray Detection

571

Considerations in measuring vital signs cross section with Doppler radar

572

Considerations in Medium Voltage Reduced Voltage Motor Starting the Good, the Bad and the Ugly

573

Considerations in Medium Voltage Reduced Voltage Motor Starting the Good, the Bad and the Ugly

574

Considerations in modeling and applications of three winding transformers in industrial and commercial facilities

575

Considerations in modelling and control of gas turbines — A review

576

Considerations in moving electronic radiography into routine use

577

Considerations in multidimensional filter bank design

578

Considerations in multidimensional filter bank design

579

Considerations in multiple dimensions for Costa Rica e-government strategy

580

Considerations in network and automation options for Low-Voltage Motor Control Centers

581

Considerations in network and automation options for low-voltage motor control centers

582

Considerations in outdoor intrusion sensor testing

583

Considerations in phase shifting

584

Considerations in planning for reliable electric service

585

Considerations in preparing a specification for stationary valve regulated lead-acid batteries

586

Considerations in producibility engineering of MMIC´s

587

Considerations in Protecting the Consumer-Utility Interconnection

588

Considerations in Pulse Compression Design for Weather Radars

589

Considerations in radar system engineering

590

Considerations in real-time signal processing under FORTRAN control

591

Considerations in running TCP/IP-based networks over the X.25 public data network

592

Considerations in seismic qualification of insulation systems

593

Considerations in Selecting a Carrier Relaying System [includes discussion]

594

Considerations in selecting a design-for-testability technique

595

Considerations in servomechanism design

596

Considerations in setting up supporting facilities for microprocessor applications work and teaching

597

Considerations in Simulation of a Notional All-Electric Ship AC/DC Conversion System

598

Considerations in solution stabilization for thermal fatigue modeling of lead-free solder joints

599

Considerations in Specifying Corona Tests [includes discussion]

600

Considerations in SSB and ISB systems for long-distance radiotelegraph communications

601

Considerations in Standardizing Control Room Arrangements

602

Considerations in Superheterodyne Design

603

Considerations in Testing and Stabilizing Frequency Beating of a Current Source Inverter

604

Considerations in the Adoption of a Full Scale Distribution Automation System

605

Considerations in the application of dynamic programming to optimal aircraft trajectory generation

606

Considerations in the autocalibration of quadrature receivers

607

Considerations in the choice of main dimensions of stators of electrical machines in relation to their vibration characteristics

608

Considerations in the choice of propagation models for land mobile radio planning and simulation

609

Considerations in the choice of the optimum data transmission systems for use over telephone circuits

610

Considerations in the control of PWR-type multimodular reactor plants

611

Considerations in the Desigin of Multimegawatt Very Broadband Travelling Wave Tubes

612

Considerations in the design and sensitivity optimization of the micro tactile sensor

613

Considerations in the design of a boundary scan runtime library

614

Considerations in the design of a boundary scan runtime library

615

Considerations in the design of a broadband E-field sensing system

616

Considerations in the design of a CFA for the power from space application

617

Considerations in the design of a communication network for an autonomously managed power system

618

Considerations in the design of a dynamic control system for the generalized chemical processing model considered as a nonl inear system

619

Considerations in the Design of a Goto Logical System

620

Considerations in the design of a high speed decimal unit

621

Considerations in the design of a high-fidelity radiogramophone

622

Considerations in the design of a high-fidelity radio-gramophone

623

Considerations in the design of a model propagation path to study obstacle diffraction

624

Considerations in the design of a multi-bandwidth, sensitive, wide dynamic range, wide frequency range EMI receiver

625

Considerations in the Design of a Radar Intermediate-Frequency Amplifier

626

Considerations in the Design of a Universal Beacon System

627

Considerations in the design of an air traffic management system

628

Considerations in the Design of Bond Straps

629

Considerations in the Design of Centimeter-Wave Radar Receivers

630

Considerations in the design of communications systems for power plants

631

Considerations in the design of detectors for underwater acoustic signals

632

Considerations in the design of drive systems for on-the-road electric vehicles

633

Considerations in the design of grounding system for solar farms

634

Considerations in the design of high frequency, high power nonlinear magnetic components

635

Considerations in the design of MRI magnets with reduced stray fields

636

Considerations in the design of naval electric power systems

637

Considerations in the design of optimum compaction filters for subband coders

638

Considerations In The Design Of Probe Heads For 100 Gbit/in/sup 2/ Recording Density

639

Considerations in the design of probe heads for 100 Gbit/in² recording density

640

Considerations in the Design of Pulse Amplifiers for Use with Solid State Radiation Detectors

641

Considerations in the design of small motors for automotive applications

642

Considerations in the Design of the Station Auxiliary System at the Encina Generating Station [includes discussion]

643

Considerations in the design of three phase compact transmission lines

644

Considerations in the Design of Transistor Luminance Output Amplifiers

645

Considerations in the development of a high-power rectifier locomotive

646

Considerations in the development of a knowledge-based control systems design associate

647

Considerations in the development of an intelligent design associative

648

Considerations in the development of flight critical software-based systems using Off-The-Shelf components

649

Considerations in the development of the advanced propagation model (APM) for U.S. Navy applications

650

Considerations in the estimation of costs and benefits of industrial energy efficiency projects

651

Considerations in the extraction of physically significant parameters for various c-Si cell architectures

652

Considerations in the implementation of an adaptive transform coder for speech in a 16-bit fixed point arithmetic microprocessor

653

Considerations in the modelling of seafloor acoustic backscatter

654

Considerations in the Operation of Outdoor Oil Circuit Breakers Under Low Ambient Temperatures [includes discussion]

655

Considerations in the presentation of evidence

656

Considerations in the presentation of evidence

657

Considerations in the Rating and Testing of Power Circuit Breakers [includes discussion]

658

Considerations in the Regulation of Interconnected Areas

659

Considerations in the Selection and Application of AC and DC Motors for Cement Plants

660

Considerations in the selection and supervision of VLSI design projects

661

Considerations in the Selection of a Radiotherapy Accelerator

662

Considerations in the selection of primary overcurrent protection for three-phase transformers

663

Considerations in the specification of AC propulsion equipment for passenger vehicles

664

Considerations in the treatment of an anechoic chamber

665

Considerations in the use of a dedicated VLSI DSP chip for real time signal processing

666

Considerations in the Use of Coplanar Waveguide for Millimeter-Wave Integrated Circuits

667

Considerations in the use of current limiting fuses on pole-type transformers

668

Considerations in the use of RF Transformer Ferrites

669

Considerations in the use of Super 16 mm film for the production of wide-screen television programming

670

Considerations in the Use of the Laser Flash Method for Thermal Measurements of Thermal Interface Materials

671

Considerations in the VLSI circuit implementation of 2B1Q transceivers

672

Considerations in Transistor Automobile Receiver Front End Design

673

Considerations in unit substation design to optimize reliability and electrical workplace safety

674

Considerations in unit substation design to optimize reliability and electrical workplace safety

675

Considerations in unit substation design to optimize reliability and electrical workplace safety

676

Considerations in unit substation design to optimize reliability and electrical workplace safety

677

Considerations in wind farm grounding design

678

Considerations in Wind Farm Grounding Designs

679

Considerations into the change of the distribution power system grounding

680

Considerations leading to a strategy for the prediction of radiated emissions

681

Considerations of a high repitition Capillary Discharge operated in nitrogen as a water-window X-ray microscope source

682

Considerations of a large force balanced magnetic energy storage system

683

Considerations of a Rectangular Waveguide below Cutoff Piston Attenuator as a Calculable Broad-Band Attenuation Standard between 1 MHz and 2.6 GHz

684

Considerations of a short-stroke linear actuator

685

Considerations of a shunt active filter based on voltage detection for installation on a long distribution feeder

686

Considerations of a shunt active filter based on voltage detection for installation on a long distribution feeder

687

Considerations of a Tropospheric Scatter System for Field Use

688

Considerations of AC and DC testing of large electrical stator windings and components

689

Considerations of accuracy and uncertainty with kriging surrogate models in single-objective electromagnetic design optimisation

690

Considerations of accuracy in the determination of the capacitance-voltage law parameters of microwave diodes

691

Considerations of ALARP for Complex Safety Related Systems

692

Considerations of and improvements to large-scale vegetation monitoring

693

Considerations of atmospheric noise effects on wideband MF communications

694

Considerations of Base Shape on Aerodynamics of Supersonic Spin-Stabilized Projectile

695

Considerations of characterizing standard SMT packages for RFIC applications

696

Considerations of cleanliness and craftsmanship in the manufacture and installation of high voltage splices and terminations

697

Considerations of computer based education in acoustics and signal processing

698

Considerations of conduction mechanism of LDPE under AC high field

699

Considerations of configurations on induction heating type indirect heating system

700

Considerations of Connecting MANETs Through an Airborne Network

701

Considerations of contrast sensitivity function of low vision

702

Considerations of coupling selection, installation and alignment: effects on motor mechanical performance

703

Considerations of designing P-band space-borned bistatic radar systems

704

Considerations of dimensionality versus sample size

705

Considerations of Direct Torque Control for Switched Reluctance Motors

706

Considerations of DSP controlled VSC based STATCOM

707

Considerations of effective tidal traffic dispatching in software-defined metro IP over optical networks

708

Considerations of Effectiveness of Media Switching and QoS Functions

709

Considerations of EMI and EMC in the design of 3D imaging microwave altimeter

710

Considerations of EMI and methods to achieve EMC in laptops

711

Considerations of employing motors with oil mist lubrication

712

Considerations of Extending SQL on Encrypted Data in UniSQL

713

Considerations of Ground Fault Protection as Influenced by the Occupational Safety and Health Act and the Mining Enforcement and Safety Administration

714

Considerations of harmonic and torque ripple in a large power doubly salient electro-magnet motor drive

715

Considerations of high power electromagnetics (HPEM) transients with respect to Smart Grid

716

Considerations of kVA capacity of power compensation systems for DC transmission system including wind turbine generating systems

717

Considerations of MCNP Monte Carlo code to be used as a radiotherapy treatment planning tool

718

Considerations of microwave installations

719

Considerations of microwave power measurement on modulated signals

720

Considerations of Moon-Relay Communication

721

Considerations of multi network in Cognitive network

722

Considerations of multiple network interface for a mobile node

723

Considerations of multiplexing techniques for the land mobile radio services [abstracts]

724

Considerations of Neighbor Discovery Protocol over IEEE 802.16 Networks

725

Considerations of neutral current protection operation during cascade short-circuit of capacitor unit

726

Considerations of New Magnet-Wire Enamels

727

Considerations of noise and schemes for its reduction in laser amplifiers

728

Considerations of Nonlinear Effects in Phase-Modulation Systems

729

Considerations of non-sinusoidal field distribution in a permanent magnet synchronous motor control

730

Considerations of optimum electrode structure for lumped constant type LN optical modulator in the microwave band with electromagnetic field simulator

731

Considerations of performance factors in CMOS designs

732

Considerations of periodic traffic in packet switching

733

Considerations of process flexibility in design of chemical processes for satisfaction of economic and environmental objectives

734

Considerations of pulsed electric field inactivation of microorganisms [Paper Unavailable]

735

Considerations of reactive power/voltage control in CAISO market operations

736

Considerations of relevant factors in setting distribution system reliability standards

737

Considerations of rod-pinch diode operation in negative polarity for radiography

738

Considerations of sample and feature size

739

Considerations of SAW coupled-mode equations and equivalent circuit representation of interdigital transducers

740

Considerations of SCTP Retransmission Delays for Thin Streams

741

Considerations Of Sea Water Conductivity Enhancement For Electromagnetic Thrusters

742

Considerations of Sectionalizing Switches in Distribution Networks With Distributed Generation

743

Considerations of selecting filter parameters of three-phase PWM inverter systems

744

Considerations of Self-Motion in Motion Saliency

745

Considerations of Service Assembly Based on the Analysis of Data Flows between Services

746

Considerations of small cell strategy in mobile communication systems

747

Considerations of spaceborne SAR system design

748

Considerations of spectral efficiency in future communications

749

Considerations of Stator Resistance Online-tuning Method for MRAS-based Speed Sensorless Induction Motor Drive

750

Considerations of structural functionalism on co-evolution of environmental policy and technology

751

Considerations of the blind region for single-borehole bistatic and monostatic pulse radars

752

Considerations of the Driving Electronics of LED Video Display

753

Considerations of the influence of secondary-side converter type and of the primary-side inverter input voltage on the efficiency of inductive power transfer system

754

Considerations of the Padé approximant technique in the synthesis of recursive digital filters

755

Considerations of the performance characteristics of the cableless micro-actuator by using mechanical DC-AC inverter

756

Considerations of the suppression of insulator flashover by resistive surface films

757

Considerations of transient electromagnetic forces in structural behaviors for ITER shield blanket components

758

Considerations of Transient Recovery Voltages in Connection with the Modern Circuit Breaker Testing

759

Considerations of Using Power Line Communication in the AMR System

760

Considerations of UWB circular disc antenna miniaturization

761

Considerations of vision based on associative neural networks

762

Considerations on 2D numerical modelling of permanent magnet synchronous motors for driving electric bicycles

763

Considerations on a frequency correlation for distributed antenna systems

764

Considerations on a hybrid TEM-reverberation chamber

765

Considerations on a long-distance-delay-wave-distortion equalizing method in terrestrial digital broadcasting

766

Considerations on a multi-user MIMO system using channel prediction based on an AR model

767

Considerations on a new approach of the confidence interval for population mean

768

Considerations on a new software architecture for distributed environments using autonomous semantic agents

769

Considerations on a PBL-based course on radio communications: A decade´s experience

770

Considerations on a reactive power concept in a multiline system

771

Considerations on a scanned adaptive superresolution array

772

Considerations on adaptive techniques for time-division multiplexing radio systems

773

Considerations on aging tests of the class H post impregnated insulation system for rotating machines

774

Considerations on an Intelligent Buildings Management System for an Optimized Energy Consumption

775

Considerations on an optical repeater system employing light-focusing glass laser amplifiers

776

Considerations on analog and digital electronic switching networks and their applications

777

Considerations on application of selective hardening based on software fault tolerance techniques

778

Considerations on applying OFDM in a highly efficient power amplifier

779

Considerations on articulatory dynamics for continuous speech recognition

780

Considerations on Beam Quality Control in MIT X-Ray FEL

781

Considerations on boost inductor design in back-to-back converters for renewable energy

782

Considerations on C/T matrix-based polsar land classification and explorations on stokes vector-based method

783

Considerations on cloud attenuation at 100 and 300 GHz for propagation measurements within the TeraSense project

784

Considerations on Collective Ion Acceleration as an Intense Ion Injector

785

Considerations on communications network protocols in deep space

786

Considerations on configurable multi-standard antennas for mobile terminals realized in LTCC technology

787

Considerations on coupling-of-modes equations for shear horizontal type SAW

788

Considerations on Customer Access to the ISDN

789

Considerations on DC side grounding configurations of LVDC microgrids

790

Considerations on deploying a model-based safety system into human-robot co-operation

791

Considerations on designing single- and dual-reflector antennas for efficient narrow pulse radiation

792

Considerations on distance relay setting for transmission line with STATCOM

793

Considerations on Distributed Load Balancing for Fully Heterogeneous Machines: Two Particular Cases

794

Considerations on Double Exponential-Based Cubatures for the Computation of Weakly Singular Galerkin Inner Products

795

Considerations on downlink non-orthogonal multiple access (NOMA) combined with closed-loop SU-MIMO

796

Considerations on Educating Engineers in Sustainability

797

Considerations on Embroidered Textile Antennas for Wearable Applications

798

Considerations on energy absorption of HVDC circuit breakers

799

Considerations on Error Probability in Correlated-Symbol Systems

800

Considerations on establishing a measurement uncertainty framework for AAS base stations

801

Considerations on evaluation methods for reliable stress grading systems of converter-fed high voltage rotating electrical machines

802

Considerations on extended feature vectors in automatic face recognition

803

Considerations on Facsimile Transmission Speed

804

Considerations on Fairness-Aware Data Mining

805

Considerations on forwarder selection for opportunistic protocols in wireless networks

806

Considerations on Gamification of E-Learning Application: Case Study with Phrase Building Training Application

807

Considerations on geometry design of surface-emitting laser diodes

808

Considerations on geometry design of surface-emitting laser diodes

809

Considerations on geometry design of surface-emitting laser diodes

810

Considerations on grounding possibilities of Transformerless grid-connected photovoltaic inverters

811

Considerations on group delay fitting equations for dispersion-shifted fibres

812

Considerations on harmonic impedance estimation in low voltage networks

813

Considerations on harmonic measurements and instrumentation under time varying conditions

814

Considerations on high peak powers from CO2and CO2- mixture lasers

815

Considerations on high resolution patterns engraved by ion etching

816

Considerations on high speed transmission

817

Considerations on highly scalable and easily stackable phase change memory cell array for low-cost and high-performance applications

818

Considerations on how visualizing biological rhythm entrainment affects children´s listening attitude

819

Considerations on IDDQ test on OTFT circuits

820

Considerations on impedance matrix determination for accurate passive device characterization

821

Considerations on Improvement of Electric Power Supply in Agricultural and Pastoral Areas of East-Tibet

822

Considerations on Improving the Performance Characteristics of Linear Parametric Motor

823

Considerations on In-Band and Out-of-Band Signalling Constraints in OBS Networks

824

Considerations on incremental approach to hardware implementation of Smith-Waterman algorithm

825

Considerations on in-field induction motor load estimation methods

826

Considerations on information storage and retrieval systems for recycling objects

827

Considerations on interference cancellation and error control in massive uncoordinated peer-to-peer networks

828

Considerations on Interference for Hybrid Mode Digital Radio Broadcast Standards over AM Frequencies

829

Considerations on isochronal anneal technique: From measurement to physics

830

Considerations on link and system throughput of Bluetooth networks

831

Considerations on LNA design for VSAT applications based on a new method

832

Considerations on locator selection by multihomed hosts in future Internet

833

Considerations on Low Cost Placement Equipment for Board Assembly

834

Considerations on Magnetic Circuit Model of Linear Parametric Motor Using Four Legs of Laminated Iron Core

835

Considerations on maintenance strategies for data communication assets in power distribution utilities

836

Considerations on Matrix Methods and Estimation of Their Errors

837

Considerations on measurement setup for second-order nonlinearity in radio-frequency bulk acoustic wave duplexers

838

Considerations on measuring technology tree features

839

Considerations on millimeter-wave indoor LAN

840

Considerations on modelling and simulation of stator winding distribution of a permanent magnet synchronous motor for driving a bicycle

841

Considerations on modulations and protocols suitable for visible light communications (VLC) channels: Low and medium baud rate indoor visible ligth communications links

842

Considerations on narrowband and broadband power line communication for smart grids

843

Considerations on network interfaces for third generation mobile telecommunication systems

844

Considerations on new primaries for high definition television

845

Considerations on next generation of high-definition in television programme production, emission and display

846

Considerations on on-site evaluation of transformer oil quality

847

Considerations on operations planning for new global telecommunications services

848

Considerations on optical wavelength multiplexing versus optical time multiplexing in transport network

849

Considerations on oxide reliability QC

850

Considerations on package design for high speed and high pin count CMOS devices

851

Considerations on Parallelizing Nonnegative Matrix Factorization for Hyperspectral Data Unmixing

852

Considerations on partial discharge of nanocomposite enameled magnet wires for inverter fed random wound motors

853

Considerations on particle dynamics in a heavy ion DTL

854

Considerations on pauses and fundamental movements for transmitting traditional skills

855

Considerations on performance evaluation of cavity-backed slot antenna using the FDTD technique

856

Considerations on performance evaluation of micro-mobility architectures for IP networks

857

Considerations on PI/PID controller design: application to a continuous stirred tank reactor

858

Considerations on PID controller operation: Application to a continuous stirred tank reactor

859

Considerations on placement of piezoceramic actuators that are used in structural vibration control

860

Considerations on power quality measurements and measurement instrumentation

861

Considerations on practical implementation of control system for switch mode current regulator

862

Considerations on Printed Wiring Board design for Fatigue Reliability of Pb-free soldered leadless packages

863

Considerations on probabilistic harmonic voltages

864

Considerations on problem-based learning in the laboratory teaching of microcontrollers basics

865

Considerations on providing emergency alerting information in digital signage services

866

Considerations on quantization and dynamic bit-allocation in subband coders

867

Considerations on rectifier sizing

868

Considerations on SAR measurement for recent trend of the usages and new technologies

869

Considerations on SDH radio relay systems management

870

Considerations on Security in ZigBee Networks

871

Considerations on security model of home network

872

Considerations on selecting fractional—slot windings

873

Considerations on Selecting Fractional-Slot Nonoverlapped Coil Windings

874

Considerations on selection of current sources and mirrors for current-based biasing of active-pixel matrix internal function blocks

875

Considerations on Self-Healing and Assisted-Healing for power transmission systems in operation centers

876

Considerations on signal processing for power systems in the context of Smart Grids

877

Considerations on signalling for an OBP satellite system offering ISDN services

878

Considerations on signals conditioning circuits

879

Considerations on size reduction of UWB antennas

880

Considerations on Soft Heating Elements Utilizing Temperature Sensitive Amorphous Metal Flakes and Their Application to Local Hyperthermia

881

Considerations on Synchronization for PCM Telemetry

882

Considerations on System Design, Implementation and Computer Processing in SPECT

883

Considerations on system-level behavioural and structural modeling extensions to VHDL

884

Considerations on tariff strategies for nonsinusoidal conditions

885

Considerations on TCB subsetting

886

Considerations on teaching digital ASIC design

887

Considerations on terminal antenna design and analysis

888

Considerations on the ${{ 4 {{NT}}_{\\rm o} }/{ {T}_{\\rm m}}}$ Ratio and the Noise Correlation Matrix of Active and Passive Two-Port Networks

889

Considerations On The Accuracy Of Three-Phase Harmonic Penetration Studies in Transmission Systems: A Case Study

890

Considerations On The Accuracy Of Three-Phase Transmission Systems Harmonic Penetration Studies: A Case Study

891

Considerations on the aggregation of harmonics produced by large wind farms

892

Considerations On The Amortisation Of Free Oscillations In A Synchronous Machine With No Load

893

Considerations on the analysis of an induction heating system

894

Considerations on the Anomalous Rotating Phenomena of Parametric Induction Motors

895

Considerations on the Application of AGC/ASC Amplifiers in CATV Systems

896

Considerations on the Application of Improved Power Factor Converter Structures

897

Considerations on the application of object-oriented reuse technology to the computer-supported cooperative learning domain

898

Considerations on the benchmarking of media forensics

899

Considerations on the biological effect of laser induced radiation with high dose rates

900

Considerations on the characteristic impedance of periodically grounded multiconductor transmission lines

901

Considerations on the Characterization and the Modelization of Ultra-Wideband Antennas

902

Considerations on the compatibility conditions of the Eyring model applied for multiple stresses

903

Considerations on the Complexity of Embedded Real-Time System Design Tasks

904

Considerations on the composition of optical array logic network architecture

905

Considerations on the control design of DC-link based inverters in grid-connected photovoltaic systems

906

Considerations on the coordinated control of controllable reactors

907

Considerations on the C-V Characteristics of Pentacene Metal-Insulator-Semiconductor Capacitors

908

Considerations on the DBD power supply for surface change of ozone reactor

909

Considerations on the de-embedding of differential devices using two-port techniques

910

Considerations on the design and analysis of a shaped reflector antenna for nodal stations in metropolitan areas

911

Considerations on the design of a low power induction heating system

912

Considerations on the design of a low-power electric plant and analysis of influence factors

913

Considerations on the design of a power system decentralized dynamic observer

914

Considerations on the design of sectored receivers for wireless optical channels using a Monte-Carlo-based ray-tracing algorithm

915

Considerations on the Design of the Decelerator of the CLIC Test Facility (CTF3)

916

Considerations on the design of transceivers for wireless optical LANs

917

Considerations on the design of voltage control for multi-machine MVDC power systems on large ships

918

Considerations on the dielectric properties and thermal profile of geopolymeric composites with ferro / ferrimagnetic inserts

919

Considerations on the effect of a temperature gradient on the dielectric performance of a CGI bus

920

Considerations on the evolution of attention paid to education in Romania compared to EU, in the 1998–2010 period

921

Considerations on the experimental performance developed by a hybrid synchronous motor

922

Considerations on the Finite-Element Simulation of High-Temperature Superconductors for Magnetic Levitation Purposes

923

Considerations on the frequency dependence of waveguide modes in premagnetized ferrites near resonance

924

Considerations on the functions and importance of a web crawler

925

Considerations on the Grid oriented environmental application development framework

926

Considerations on the impedance character and impedance criterion in two-stage dc distributed power system

927

Considerations on the information and entropy of ordinal data

928

Considerations on the insularity of performance evaluation

929

Considerations on the Least Upper Bound for Mixed-Criticality Real-Time Systems

930

Considerations on the Licensed Shared Access (LSA) architecture from the incumbent perspective

931

Considerations on the life performance and installation practice of shunt capacitors in the presence of harmonics generated by AC/DC converters

932

Considerations on the line capacitance under surge corona discharge

933

Considerations on the measurement of active differential devices using baluns

934

Considerations on the Measurement of the Stability of Oscillators with Frequency Counters

935

Considerations on the measurement of the stability of oscillators with frequency counters

936

Considerations on the method of determining mortar-received heat using aerial ultrasonic waves with finite amplitude

937

Considerations on the mobile radio system architecture

938

Considerations on the modeling and control scheme of grid connected inverter with voltage support capability

939

Considerations on the multiplexing and diversity tradeoff in ieee 802.11 networks

940

Considerations on the non-active power using geometric algebra

941

Considerations on the operating point of a planar parametric transformer based on the Mathieu equation

942

Considerations on the operation & management of a modern wind turbine power station

943

Considerations on the optimal power stage segmentation algorithm for MHz integrated synchronous Buck DC-DC converters

944

Considerations on the Optimum Design of Small-Sized Parametric Induction Motors

945

Considerations on the Origin of the Kohlrausch Behaviour

946

Considerations on the performance of serial search pseudo-noise code acquisition with a square-law detector

947

Considerations on the Reactive Power in Nonsinusoidal Situations

948

Considerations on the relationship between distributed capacitance and iron loss in high-voltage transformers

949

Considerations on the relationship between distributed capacitance and power loss in a push-pull current-fed converter in buck-mode

950

Considerations on the Relationship Between Dosimetry Metrics and Experimental Conditions

951

Considerations on the RLC model of CMOS transistor only simulated inductors

952

Considerations on the role of smart meters in the incorporation of renewable energy sources through microgrids

953

Considerations on the role of the Hall current in a laboratory-model thruster

954

Considerations on the roles and ontology in modeling workflow management systems

955

Considerations on the semiconducting properties of PZT 65/35 thin films

956

Considerations on the simulation models of ac plunger-type magnets

957

Considerations on the speed controllers for vector controlled induction motor drives

958

Considerations on the unbalance regime of the three-phase consumers

959

Considerations on the use of commercial loop modules in the excitation of UHF RFID antennas

960

Considerations on the use of HVDC for CREZ transmission

961

Considerations on the Use of Lacunarity for comparing the resonant behavior of different convoluted wire antennas

962

Considerations on the validity constraints for the bistatic SAR processing

963

Considerations on transaction response time and configuration checking in autonomous decentralized DB (ADDS)

964

Considerations on transport networks technologies evolution

965

Considerations on two-layer radial based function network

966

Considerations on unsupervised spectral data unmixing and complexity pursuit

967

Considerations on Using Ontologies in Complex Systems

968

Considerations on using UMA with Smart Grids

969

Considerations on Water Vapor and Surface Reflectance Retrievals for a Spaceborne Imaging Spectrometer

970

Considerations on watermarking security

971

Considerations on weak linear spaces

972

Considerations over implementing IEEE 802.21 on a device powered by a mobile operating system

973

Considerations pertaining to the design of an electronic telephone switching system

974

Considerations Regarding Determination of the Induction Motors Parameters

975

Considerations regarding dynamic regimes of reluctance synchronous motors

976

Considerations regarding modelling, simulation and monitoring of dynamic regimes for asynchronous motors

977

Considerations regarding optimal control of DC motor drive systems

978

Considerations regarding shielding effectiveness and testing of electromagnetic protected enclosures used in communications security

979

Considerations regarding the behaviour of power transformers in transient regimes at no-load and short-circuit connection

980

Considerations regarding the comparison of traction batteries

981

Considerations regarding the comparison of traction batteries

982

Considerations regarding the efficiency of high power RF sources for particle accelerators

983

Considerations regarding the Induction Generator´s Self-Excitation within Energy Power Stations

984

Considerations regarding the management of embedded computer system reserves

985

Considerations regarding the radio design of GSM-R systems, inside railway tunnels

986

Considerations regarding the use of semiconductor heterojunctions for laser operation

987

Considerations to choose an appropriate charger topology for plug-in electric vehicles

988

Considerations to electromechanical flywheel design to enhance rural energisation in Sub-Saharan Africa

989

Considerations to improve the practical design of universal and full-effective NiCd/NiMH battery fast-chargers

990

Considerations to improve the recovery of the thermic component of the compressed air for compressor stations

991

Considerations to Spoken Language Recognition for Text-to-Speech Applications

992

Considerations to the Development of Explorer VII Satellite

993

Considerations toward coordinated control of DFIG-based wind farms

994

Considerations Toward Coordinated Control of DFIG-Based Wind Farms

995

Considerations Towards a Cyber Crime Profiling System

996

Considerations towards a holistic model of energy dynamics in global networks

997

Considerations underlying the study of sensory elements

998

Considerations when applying ASDs in continuous processes

999

Considerations when applying ASDs in continuous processes

1000

Considerations when applying capacitors on distribution systems

بازگشت