<< مقالات لاتين فني مهندسي >>
<< بر اساس عنوان >>
1
Design and Analysis of a 32-bit Embedded High-Performance Cluster Optimized for Energy and Performance
2
Design and Analysis of a 34 dBm Ka-Band GaN High Power Amplifier MMIC
3
Design and Analysis of a 3-Arm Spiral Antenna
4
Design and analysis of a 3-DOF micromanipulator
5
Design and analysis of A 3-DOF micromanipulator driven by piezoelectric actuators
6
Design and analysis of a 3GHz printed dipole antenna
7
Design and analysis of a 3-PPR planar robot with U-shape base
8
Design and analysis of a 3-RPRS modular parallel manipulator for rapid deployment
9
Design and analysis of a 3-way unequal split Ultra-Wideband Wilkinson power divider
10
Design and analysis of a 44-GHz MMIC low-loss built-in linearizer for high-linearity medium power amplifiers
11
Design and analysis of a 4-bit low power universal Barrel-shifter in 16nm FinFET technology
12
Design and Analysis of A 5.3-pJ 64-kb Gated Ground SRAM With Multiword ECC
13
Design and analysis of a 5.88GHz microstrip phased array antenna for intelligent transport systems
14
Design and analysis of a 512×768 current-mediated active pixel array image sensor
15
Design and Analysis of a 55–71-GHz Compact and Broadband Distributed Active Transformer Power Amplifier in 90-nm CMOS Process
16
Design and analysis of a 55-kW air-cooled automotive traction drive inverter
17
Design and analysis of a 5-element ESPAR antenna with an active PIFA
18
Design and Analysis of a 5-phase DSRM Drive
19
Design and analysis of a 5-pole interdigital band-pass filter at 2.4GHz
20
Design and analysis of a 6 GHz chip antenna on glass substrates for integration with RF/wireless microsystems
21
Design and Analysis of a 60-GHz CMOS Doppler Micro-Radar System-in-Package for Vital-Sign and Vibration Detection
22
Design and analysis of a 6-DOF force/torque sensor for human gait analysis
23
Design and analysis of a 6-DOF parallel robot used in artificial cervical disc replacement surgery
24
Design and analysis of a 6-stage tunable MZI PLC for BPSK generation
25
Design and analysis of a 70-ps SiGe differential RF switch
26
Design and Analysis of a 77.3% Locking-Range Divide-by-4 Frequency Divider
27
Design and analysis of a 7-level cascaded multilevel inverter with dual SDCSs
28
Design and Analysis of a 90 nm mm-Wave Oscillator Using Inductive-Division
LC
Tank
29
Design and Analysis of a Backpressure Congestion Control Algorithm in Wireless Sensor Network
30
Design and analysis of a band-notched UWB 1 to 4 Wilkinson power divider using symmetric defected ground structure
31
Design and analysis of a bandwidth management framework for ATM-based broadband ISDN
32
Design and analysis of a bandwidth management framework for ATM-based broadband ISDN
33
Design and analysis of a Be window for the APS diagnostics undulator beamline
34
Design and Analysis of a Bent Antenna-coil for a HF RFID Transponder
35
Design and analysis of a bidirectional cross-linking transverse flux permanent magnet synchronous motor
36
Design and analysis of a biogas digester for a net-zero energy community in southwestern Ontario
37
Design and analysis of a biomimetic wire-driven flapping propeller
38
Design and analysis of a bionic quadruped robot
39
Design and Analysis of a Blind Juggling Robot
40
Design and analysis of a broad band transimpedance amplifier
41
Design and analysis of a broad band wide beam circular polarization microstrip antenna
42
Design and Analysis of a Broadband Low Profile Monopolar Patch Antenna
43
Design and analysis of a broadband monopolar patch antenna
44
Design and analysis of a brushless DC motor for applications in robotics
45
Design and analysis of a brushless doubly fed induction machine with rotary transformer
46
Design and analysis of a buck-type class-D gate driver IC
47
Design and analysis of a buffer management scheme for multimedia traffic with loss and delay priorities
48
Design and analysis of a bufferless Optical Packet Switch architecture with Wavelength Optical Crossbars
49
Design and analysis of a bulk micromachined distributed digital microwave phase shifter on glass substrate
50
Design and analysis of a bus bar structure for a medium voltage inverter
51
Design and analysis of a cable-driven manipulator with variable stiffness
52
Design And Analysis Of A Capacitive Vibration-To-Electrical Energy Converter With Built-In Voltage
53
Design and Analysis of a Capacitively-Coupled Clamped-Clamped MEMS Resonator
54
Design and Analysis of a Cascade Circular Polarization Selective Surface at K Band
55
Design and Analysis of a Cascode Bipolar Low-Noise Amplifier With Capacitive Shunt Feedback Under Power-Constraint
56
Design and analysis of a center-fed quad-band ring-focus reflector antenna
57
Design and analysis of a chaotic micromixer with vortices modulation
58
Design and Analysis of a Chaotic PWM Inverter for Electric Vehicles
59
Design and Analysis of a CHB Converter Based PV-Battery Hybrid System for Better Electromagnetic Compatibility
60
Design and analysis of a choking strategy for coalitions in data swarming systems
61
Design and analysis of a circular double-layer broadband microstrip antenna
62
Design and analysis of a circular patch antenna on a finite conical ground plane
63
Design and analysis of a class of hierarchical interconnection networks
64
Design and Analysis of a Class of Simple Networks
65
Design and Analysis of a Class-D Stage With Harmonic Suppression
66
Design and Analysis of A Class-E Frequency-Controlled Transcutaneous Energy Transfer System
67
Design and Analysis of a Claw Pole Permanent Magnet Motor With Molded Soft Magnetic Composite Core
68
Design and analysis of a closed-loop controller for an anti-G suit
69
Design and analysis of a cloud-based epidemic simulation framework
70
Design and analysis of a cluster-based calcium signaling network model
71
Design and analysis of a CMOS even harmonic mixer with current reuse circuits
72
Design and Analysis of a CMOS Ratio-Memory Cellular Nonlinear Network (RMCNN) Requiring No Elapsed Time
73
Design and analysis of a CMOS SOS/SOI receiver for a radiation hard computer
74
Design and analysis of a CNTFET-based potentiostat for bio medical sensing application
75
Design and analysis of a coaxial coupler for a 35-GHz gyroklystron amplifier
76
Design and analysis of a collision avoidance system for the visually impaired
77
Design and analysis of a combination antenna with rectangular dielectric resonator and inverted L-plate
78
Design and Analysis of a Combined Power Supply for High-Field Quasi-Continuous Magnets
79
Design and analysis of a compact antenna for UWB RFID applications
80
Design and analysis of a compact CPW-fed triple band notched printed monopole antenna for UWB application
81
Design and Analysis of a Compact Dual-Element Off-Axis Display
82
Design and analysis of a compact low cost patch antenna for different wireless operations
83
Design and analysis of a compact Modified Welch-Costas coded optical CDMA system
84
Design and analysis of a compact planar electromagnetic bandgap (EBG) structure
85
Design and analysis of a compact planar ultra-wideband fractal antenna
86
Design and analysis of a compact size planar antenna for UWB applications
87
Design and Analysis of a Compact Terahertz Signal Generator for Military Communications
88
Design and analysis of a compact UWB pulse generator with programmable pulse shape
89
Design and analysis of a compact wideband pattern-reconfigurable antenna with alternate reflector and radiator
90
Design and analysis of a completely decoupled compliant parallel XY micro-motion stage
91
Design and analysis of a compliant bimanual rehabilitation device
92
Design and analysis of a compliant non-invasive real-time localization system for nasogastric intubation
93
Design and Analysis of a Conduction-Cooled Superconducting Magnet for 30 kW Class Gyrotron
94
Design and analysis of a congestion-free overlay on a high-speed network
95
Design and analysis of a connected broadband multi-piezoelectric-bimorph- beam energy harvester
96
Design and analysis of a content-based pathology image retrieval system
97
Design and analysis of a contention-based lookahead reservation protocol on a multichannel local area network
98
Design and analysis of a continuous hybrid differentiator
99
Design and analysis of a control system for an optical delay-line circuit used as reconfigurable gain equalizer
100
Design and Analysis of a Controller for a Converter Interface Interconnecting an Energy Storage With the Dc Link of a VSC
101
Design and Analysis of a CO-OFDM Transmitter With Limited Modulator Extinction Ratio
102
Design and analysis of a cooling insertion lattice for optical stochastic cooling
103
Design and analysis of a cooperative medium access scheme for wireless mesh networks
104
Design and Analysis of a Cooperative Multichannel MAC Protocol for Heterogeneous Networks
105
Design and analysis of a coreless flyback converter with a planar printed-circuit-board transformer
106
Design and analysis of a cost-effective back-to-back converter for a low voltage doubly fed induction generator
107
Design and Analysis of a Cost-Effective Magnetless Multiphase Flux-Reversal DC-Field Machine for Wind Power Generation
108
Design and analysis of a credit-based controller for congestion control in B-ISDN/ATM networks
109
Design and analysis of a current-mode controlled battery/ultracapacitor hybrid
110
Design and analysis of a current-reuse transmitter for ultra-low power applications
111
Design and analysis of a cylindrical screw-type ultrasonic motor driven by six transducers
112
Design and analysis of a cylindrical standing wave ultrasonic motor using cantilever and sandwich type transducers
113
Design and analysis of a cylindrical ultrasonic motor using bending transducer
114
Design and analysis of a DC field multitooth switched reluctance machine by using soft-magnetic-composite material
115
Design and analysis of a DC microgrid with centralized Battery Energy Storage System
116
Design and Analysis of a DC–43.5-GHz Fully Integrated Distributed Amplifier Using GaAs HEMT–HBT Cascode Gain Stage
117
Design and analysis of a DC/DC/AC three phase solar converter with minimized DC link capacitance
118
Design and analysis of a DC-DC converter for EVs battery charger
119
Design and Analysis of a DCSK-ARQ/CARQ System Over Multipath Fading Channels
120
Design and analysis of a decade bandwidth 180° hybrid coupler
121
Design and analysis of a decoupled XY micro compliant parallel manipulator
122
Design and analysis of a decoupling current controller for induction machine
123
Design and Analysis of a Delay Sensor Applicable to Process/Environmental Variations and Aging Measurements
124
Design and analysis of a denial-of-service-resistant quality-of-service signaling protocol for MANETs
125
Design and analysis of a dielectric radiator for microwave chemical reactor
126
Design and analysis of a direct load sensing electro-hydrostatic actuator
127
Design and analysis of a direct-drive two dimensional hybrid-flux planar machine
128
Design and analysis of a disc-type of traveling wave ultrasonic motor with fixing inner side
129
Design and analysis of a distributed and fair access (DFA) MAC protocol for multihop wireless networks
130
Design and Analysis of a Distributed Multi-leg Stock Trading System
131
Design and analysis of a distributed regenerative frequency divider using distributed mixer
132
Design and Analysis of a Doherty Amplifier for Retrodirective Communication System
133
Design and analysis of a double RESURF 700V LIGBT with quasi-vertical DMOSFET in junction isolation technology
134
Design and analysis of a double rings type ultrasonic motor using longitudinal transducers
135
Design and analysis of a Double Seal Door for the Tokamak Equipment CAsk(TECA)
136
Design and Analysis of a Double-Sided Linear Induction Motor for Transportation
137
Design and Analysis of a Double-Sided Tubular Linear Synchronous Generator with Particular Application to Wave-Energy Conversion
138
Design and Analysis of a Double-Stator Cup-Rotor Directly Driven Permanent Magnet Wind Power Generator
139
Design and Analysis of a Double-Stator Cup-Rotor PM Integrated-Starter-Generator
140
Design and analysis of a DPCM system with a switched quantizer
141
Design and analysis of a dSPACE-based position control system for a linear switched reluctance motor
142
Design and analysis of a DSP-based linear switched reluctance motor
143
Design and analysis of a dual input DC-DC converter for hybrid electric vehicle
144
Design and analysis of a dual radio node architecture and medium access control protocols for Ultra Wide Band based sensor networks
145
Design and analysis of a dual stator spoke type linear vernier machine for wave energy extraction
146
Design and analysis of a dualband antenna for small LEO satellite applications
147
Design and Analysis of a Dual-Band Inverted-F Antenna With Orthogonal Frequency-Controlled Radiation Planes
148
Design and analysis of a dual-mode flux-switching doubly salient DC-field magnetless machine for wind power harvesting
149
Design and analysis of a dual-rotor radial flux permanent-magnet generator
150
Design and Analysis of a Dual-Slope Inductance-to-Digital Converter for Differential Reluctance Sensors
151
Design and analysis of a dual-stage disk drive servo system using an instrumented suspension
152
Design and analysis of a dynamic code division multiple access communication system based on tunable optical filter
153
Design and analysis of a dynamic MEM chemical sensor
154
Design and analysis of a dynamic positioning system based on Kalman filtering and optimal control
155
Design and analysis of a dynamic scheduler for a flexible assembly system
156
Design and analysis of a dynamic scheduling strategy with resource estimation for large-scale grid systems
157
Design and analysis of a dynamically reconfigurable network processor
158
Design and analysis of a dynamically reconfigurable three-dimensional FPGA
159
Design and analysis of a fair scheduling algorithm for QoS guarantees in high-speed packet-switched networks
160
Design and analysis of a family of speed and state Sliding Mode observers with compound manifolds for the induction motor drive
161
Design and analysis of a fast frequency-hopped DBPSK communication system. I. Error performance in AWGN plus partial-band noise jamming
162
Design and analysis of a fast frequency-hopped DBPSK communication system. I. System description and hop timing tracking loop analysis
163
Design and Analysis of a Fast Infrared Tracking System with Winner-Take-All Implementation
164
Design and analysis of a fast local clustering service for wireless sensor networks
165
Design and analysis of a fault tolerant multiprocessor system with failsafe and failsafe-redundant interfacing schemes
166
Design and Analysis of a Fault-Tolerant Coplanar Gyro-Free Inertial Measurement Unit
167
Design and analysis of a fault-tolerant mechanism for a server-less video-on-demand system
168
Design and analysis of a feedforward control scheme for a three-phase voltage source pulse width modulation rectifier using sensorless load current signal
169
Design and analysis of a filament wound composite tube under general loadings with assitance of computer
170
Design and analysis of a first-order sigma-delta analog-to-digital converter for MEMS resistive sensor
171
Design and analysis of a five-phase double-stator permanent magnet synchronous motor
172
Design and analysis of a five-phase interior permanent magnet generator with a non-integer number of stator slots per phase
173
Design and analysis of a flatness-based control approach for speed control of drive systems with elastic couplings and uncertain loads
174
Design and analysis of a flexible manufacturing system with simulation-effects of flexibility on FMS performance
175
Design and Analysis of a Flux-Controllable Linear Variable Reluctance Machine
176
Design and analysis of a flux-decoupling magnetic-geared permanent-magnet brushless machine
177
Design and analysis of a flux-switching permanent magnet linear machine with high thrust density
178
Design and Analysis of a Folded Printed Inverted-F Antenna for Bluetooth Applications
179
Design and analysis of a force reflection master manipulator for minimally invasive surgical robot
180
Design and analysis of a forward-adaptive wavelet image coder
181
Design and analysis of a frame-based dynamic bandwidth allocation scheme for fiber-wireless broadband access networks
182
Design and analysis of a framework for real-time vision-based SLAM using Rao-Blackwellised particle filters
183
Design and analysis of a framework to enhance optical network utilization resources by means of virtualization
184
Design and analysis of a frequency and pattern reconfigurable microstrip patch antenna for wireless applications
185
Design and analysis of a frequency reconfigurable antenna using metasurface for wireless applications
186
Design and analysis of a friction drive planetary roller-type precision linear actuator
187
Design and analysis of a fuel cell/gas turbine hybrid power system
188
Design and Analysis of a Full-Bridge LLC-Based PEV Charger Optimized for Wide Battery Voltage Range
189
Design and Analysis of a Fully Non-blocking Quantum Switch
190
Design and Analysis of a Fully-Distributed Parallel Packet Switch
191
Design and Analysis of a Fuzzy Logic Controlled SMES System
192
Design and analysis of a Fuzzy Logic Controller for the optimal switching of drives for Hybrid Electric Vehicles
193
Design and analysis of a gate valve fluid flow using SolidWorks simulation software
194
Design and analysis of a gate-tunable graphene-based nanoantenna
195
Design and analysis of a general recurrent neural network model for time-varying matrix inversion
196
Design and analysis of a generalized architecture for reconfigurable
m
-ary tree structures
197
Design and analysis of a GMM actuator for active vibration isolation
198
Design and analysis of a GMR eddy current probe for NDT
199
Design and Analysis of a GPS-free Routing Protocol for Underwater Wireless Sensor Networks in Deep Water
200
Design and analysis of a gracefully degrading interleaved memory system
201
Design and Analysis of a Graphical Password Scheme
202
Design and analysis of a grid-connected inverter without isolation for an AC module
203
Design and Analysis of a Grid-Connected Photovoltaic Power System
204
Design and analysis of a growable multicast ATM switch
205
Design and Analysis of a Halbach Magnetized Magnetic Screw for Artificial Heart
206
Design and analysis of a hardware-assisted checkpointing and recovery scheme for distributed applications
207
Design and Analysis of a Hardware-Efficient Compressed Sensing Architecture for Data Compression in Wireless Sensors
208
Design and analysis of a helical spherical antenna using the theory of characteristic modes
209
Design and analysis of a hierarchical and modular local ATM switch
210
Design and analysis of a hierarchical clock distribution system for synchronous standard cell/macrocell VLSI
211
Design and Analysis of a Hierarchical IP Traceback System
212
Design and analysis of a hierarchical scalable photonic architecture
213
Design and analysis of a high bandwidth disk drive servo system using an instrumented suspension
214
Design and analysis of a high directivity directional coupler using synthetic coupled lines in CMOS technology
215
Design and analysis of a high frequency wireless power feeding system for train axle telemetry
216
Design and analysis of a high gain boost converter
217
Design and analysis of a high performance AES processor
218
Design and analysis of a high performance three-phase voltage source inverter based on fuzzy logic controller
219
Design and Analysis of a High Sensitive Microcantilever Biosensor for Biomedical Applications
220
Design and Analysis of a High Sensitivity FBG Accelerometer Based on Local Strain Amplification
221
Design and analysis of a high speed operational amplifier made by 60 nm gate-length MOSFETs
222
Design and analysis of a high temperature and pressure he supplying system
223
Design and Analysis of a High-Efficiency High-Voltage Class-D Power Output Stage
224
Design and Analysis of a High-Gain Observer for the Operation of SPM Machines Under Saturation
225
Design and analysis of a high-linear UWB CMOS mixer
226
Design and analysis of a high-linear UWB CMOS mixer
227
Design and analysis of a highly integrated 9-phase drivetrain for EV applications
228
Design and analysis of a highly integrated CMOS power amplifier for RFID reader
229
Design and analysis of a highly linear fully differential LNA for SOC
230
Design and Analysis of a Highly User-Friendly, Secure, Privacy-Preserving, and Revocable Authentication Method
231
Design and analysis of a high-performance cascode bipolar low noise amplifier with shunt feedback capacitor
232
Design and analysis of a high-performance sense amplifier for phase-change memory
233
Design and Analysis of a High-Power Electron Beam Source
Confined in a Highly Uniform Magnetic Field Region
234
Design and analysis of a high-sensitivity optical receiver for SONET OC-12 systems
235
Design and Analysis of a High-Speed Brushless DC Motor for Centrifugal Compressor
236
Design and analysis of a high-speed channel for Coded Differential signaling
237
Design and Analysis of a High-Speed Claw Pole Motor With Soft Magnetic Composite Core
238
Design and analysis of a high-speed comparator
239
Design and Analysis of a High-speed Comparator in a Pipelined ADC
240
Design and analysis of a high-speed sense amplifier for single-transistor nonvolatile memory cells
241
Design and analysis of a high-speed XYZ nanopositioning stage
242
Design and Analysis of a HTS Brushless Doubly-Fed Doubly-Salient Machine
243
Design and Analysis of a HTS Flux-Switching Machine for Wind Energy Conversion
244
Design and Analysis of a HTS Vernier PM Machine
245
Design and analysis of a hybrid access control to an optical star using WDM
246
Design and analysis of a hybrid axial field flux-switching permanent magnet machine
247
Design and Analysis of a Hybrid Backup Power System for a High-Rise and High-Speed Elevator
248
Design and analysis of a hybrid control scheme for sandwich nonsmooth nonlinear systems
249
Design and analysis of a hybrid two-wheel-hopping robot
250
Design and analysis of a Hyperspectral Microwave receiver subsystem
251
Design and analysis of a hyperspectral microwave receiver subsystem
252
Design and analysis of a hysteretic boost power factor correction circuit
253
Design and analysis of a jitter-free clock recovery scheme for QAM systems
254
Design and analysis of a jitter-tolerant digital delay-locked-loop based fraction-of-clock delay line
255
Design and analysis of a Ka-band coaxial-to-quad-ridged circular waveguide transition
256
Design and Analysis of a Ka-Band Monolithic High-Efficiency Frequency Quadrupler Using GaAs HBT - HEMT Common-Base/Common-Source Balanced Topology
257
Design and Analysis of a kA-Class Superconducting Reactor
258
Design and analysis of a K-band low-phase-noise phase-locked loop with subharmonically injection-locked technique
259
Design and analysis of a K-band wideband voltage-controlled oscillator with robust start-up and frequency boost
260
Design and analysis of a kind of biomimetic continuum robot
261
Design and analysis of a knowledge-aided radar detector for doppler processing
262
Design and analysis of a knowledge-based radar detector
263
Design and analysis of a laboratory cooling adsorption machine working with pair silicagel/water
264
Design and analysis of a laboratory switching power supply with wide output voltage range
265
Design and analysis of a large-range micro-gripper
266
Design and analysis of a large-scale multicast output buffered ATM switch
267
Design and analysis of a layer seven network processor accelerator using reconfigurable logic
268
Design and analysis of a leader election algorithm for mobile ad hoc networks
269
Design and analysis of a learning control system
270
Design and analysis of a LEO micro-satellite thermal control including thermal contact conductance
271
Design and analysis of a light wall-climbing robot
272
Design and analysis of a Limited angle torque motor with Dual Halbach Arrays
273
Design and analysis of a linear induction motor for a prototype HTS maglev transportation system
274
Design and analysis of a linear permanent magnet machine with three phase multi-layered structure
275
Design and Analysis of a Linear Phase-Locked Loop of Wide Dynamic Range
276
Design and analysis of a linear quadratic regulator with repetitive controller for AC power supplies
277
Design and analysis of a linear type electromagnetic stirrer
278
Design and analysis of a line-walking robot for power transmission line inspection
279
Design and analysis of a localised environment monitoring sensor system
280
Design and analysis of a locomotive module for snake-mimetic robots using mini-LIPCAs
281
Design and analysis of a log periodic antenna by using proximity fed network
282
Design and analysis of a longitudinal piezoelectric vibration exciter
283
Design and analysis of a low actuation voltage electrowetting-on-dielectric device
284
Design and analysis of a low actuation voltage electrowetting-on-dielectric microvalve for drug delivery applications
285
Design and analysis of a low cost multiple-secret-key RFID security protocol
286
Design and analysis of a low cost, high performance single phase UPS system
287
Design and analysis of a low power consumption high speed frequency divider by 2/3
288
Design and analysis of a low power HEMT SRAM cell
289
Design and analysis of a low power VLIW DSP core
290
Design and analysis of a low power wireless portable media player
291
Design and analysis of a low profile broadband wide scan array
292
Design and analysis of a low voltage regulation PM brushless DC generator
293
Design and Analysis of a Low-Loss Suspended Core Terahertz Fiber and Its Application to Polarization Splitter
294
Design and Analysis of a Low-Power 3–6-Gb/s 55-GHz OOK Receiver With High-Temperature Performance
295
Design and analysis of a low-power constant envelope phase shift modulator
296
Design and analysis of a low-power discrete phase modulator in a 0.13-μm logic CMOS process
297
Design and analysis of a low-power energy-recovery adder
298
Design and analysis of a low-power highly linear mixer
299
Design and analysis of a low-profile 28 GHz beam steering antenna solution for Future 5G cellular applications
300
Design and Analysis of a Low-Profile and Broadband Microstrip Monopolar Patch Antenna
301
Design and analysis of a low-profile directive antenna array for multi-element terminals
302
Design and analysis of a low-profile, elliptical patch Super Wide Band (SWB) MIMO antenna
303
Design and analysis of a low-voltage electrostatic actuated RF CMOS-MEMS switch
304
Design and Analysis of a MAC Protocol for Vehicle to Roadside Networks
305
Design and analysis of a MAC protocol for wireless body area network using wakeup radio
306
Design and Analysis of a Maglev Planar Transportation Vehicle
307
Design and analysis of a magnetic actuated capsule camera robot for single incision laparoscopic surgery
308
Design and analysis of a magnetic levitation device for deloading the thrust-bearing of vertical hydroelectric generating set
309
Design and analysis of a magnetic off-axis rotary position sensing device
310
Design and analysis of a magnetically actuated and compliant capsule endoscopic robot
311
Design and Analysis of a Magnetless Double-Rotor Flux Switching Motor for Low Cost Application
312
Design and analysis of a maintenance service contract
313
Design and analysis of a many-core processor architecture for multimedia applications
314
Design and analysis of a mechanical apparatus simulator
315
Design and analysis of a mechanism for enhanced flexibility in minimally invasive surgical instruments
316
Design and analysis of a Medium Voltage DC wind farm with a transformer-less wind turbine generator
317
Design and Analysis of a MEMS Based 1:N Monitored Protection Switch
318
Design and Analysis of a Mesh-based Wireless Network-on-Chip
319
Design and analysis of a metasurface for supporting spoof surface plasmon polaritons
320
Design and Analysis of a Method for Synoptic Level Network Intrusion Detection
321
Design and analysis of a micro pressure sensor with optical fiber
322
Design and analysis of a micro reciprocating engine for the time multiplexed deep etching process
323
Design and analysis of a microfluidic bus network with bypass channels
324
Design and analysis of a micropower low-voltage bang-bang control class D amplifier
325
Design and analysis of a microprocessor-controlled peak-power-tracking system [for solar cell arrays]
326
Design and analysis of a micro-solar power for Wireless Sensor Networks
327
Design and analysis of a microwave band reject filter using a double magic tee
328
Design and analysis of a microwave large-range variable phase-shifter based on an injection-locked harmonic self-oscillating mixer
329
Design and Analysis of a Millimeter-Wave Direct Injection-Locked Frequency Divider With Large Frequency Locking Range
330
Design and analysis of a mini linear actuator for optical disk drive
331
Design and analysis of a mini solar grid in remote area of Bangladesh
332
Design and analysis of a miniature 4-dimensional force/torque sensor
333
Design and Analysis of a Miniature Intensity Modulator Based on a Silicon-Polymer-Metal Hybrid Plasmonic Waveguide
334
Design and analysis of a miniature metamaterial microstrip patch antenna
335
Design and analysis of a miniature W-band MMIC subharmonically pumped resistive mixer
336
Design and analysis of a mini-linear actuator for optical disk drive
337
Design and analysis of a mixed-mode universal filter using dual-output operational transconductance amplifiers (DO-OTAs)
338
Design and Analysis of a Mobile File Sharing System for Opportunistic Networks
339
Design and Analysis of a Mobility Gateway for GPRS–WLAN Integration
340
Design and analysis of a model-based Covert Timing Channel for Skype traffic
341
Design and analysis of a modified Photonic Crystal Fiber structure
342
Design and analysis of a modified Sierpinski Carpet fractal antenna for UWB applications
343
Design and analysis of a modified TCP for Optical Burst Switched networks
344
Design and analysis of a modular magnetically coupled quadratic boost topology with a damping network for DC microgrid
345
Design and Analysis of a MST-Based Topology Control Scheme with PSO for Wireless Sensor Networks
346
Design and analysis of a multiband koch fractal monopole antenna
347
Design and analysis of a multiband Sierpinski type monopole fractal antenna
348
Design and Analysis of a Multi-Carrier Differential Chaos Shift Keying Communication System
349
Design and analysis of a multichannel ATM switch network
350
Design and analysis of a multi-channel cognitive MAC protocol for dynamic access spectrum networks
351
Design and analysis of a multi-dimensional data sampling service for large scale data analysis applications
352
Design and analysis of a multi-fractal antenna for UWB application
353
Design and analysis of a multi-joint lower limbs rehabilitation robot
354
Design and analysis of a multi-layer transformer balun for silicon RF integrated circuits
355
Design and analysis of a multi-layer transformer balun for silicon RF integrated circuits
356
Design and analysis of a multilink access subsystem based on the Batcher-banyan network architecture
357
Design and analysis of a multimode feed horn for a monopulse feed
358
Design and Analysis of a Multiphase Permanent Magnet Brushless DC Motor Drive System for High Power Applications
359
Design and Analysis of a Multiport Circuit for Shaping Sub-Nanosecond Pulses
360
Design and analysis of a multiprocessor system with extended fault tolerance
361
Design and analysis of a multistage fuzzy PID controller
362
Design and analysis of a narrowband filter for optical platform
363
Design and analysis of a network control structure with a switched PD compensator
364
Design And Analysis Of A Network Level Channel Abstraction To Support Real-time Communications
365
Design and Analysis of a Network-Assisted Fast Handover Scheme for IEEE 802.16e Networks
366
Design and analysis of a new 3-DOF compliant parallel positioning platform for nanomanipulation
367
Design and analysis of a new 7-DOF parallel type haptic device: PATHOS-II
368
Design and Analysis of a New Cable-Driven Hyper Redundant Manipulator
369
Design and Analysis of a New Class of WDM Optical Interconnect Architectures
370
Design and analysis of a new compact band-rejected UWB antenna
371
Design and analysis of a new conductivity-modulated power MOSFET
372
Design and analysis of a new doubly salient permanent magnet motor
373
Design and Analysis of a New Drive-Integrated Auxiliary Dc-Dc Converter for Hybrid Vehicles
374
Design and analysis of a new fast packet switching fabric supporting multimedia traffic
375
Design and Analysis of a New Fault-Tolerant Linear Permanent-Magnet Motor for Maglev Transportation Applications
376
Design and Analysis of a New Fault-Tolerant Magnetic-Geared Permanent-Magnet Motor
377
Design and Analysis of a New Fault-Tolerant Permanent-Magnet Vernier Machine for Electric Vehicles
378
Design and Analysis of a New Feature-Distributed Malware
379
Design and analysis of a new flexure-based XY micropositioning stage with decoupled motion characteristic
380
Design and Analysis of a New Flux Memory Doubly Salient Motor Capable of Online Flux Control
381
Design and analysis of a new fractional-slot-windings axial-flux permanent-magnet machine
382
Design and Analysis of a New Fully Stator-HTS Motor
383
Design and Analysis of a New GPS Algorithm
384
Design and analysis of a new halbach magnetized magnetic screw for artificial hearts
385
Design and analysis of a new haptic device using a parallel mechanism
386
Design and Analysis of a New HTS Axial-Field Flux-Switching Machine
387
Design and Analysis of a New HTS Double-Stator Doubly Fed Wind Generator
388
Design and Analysis of a New Hybrid Excited Doubly Salient Machine Capable of Field Control
389
Design and analysis of a new hybrid rotary steerable system for directional drilling
390
Design and Analysis of a New Linear Hybrid Excited Flux Reversal Motor With Inset Permanent Magnets
391
Design and analysis of a new linear wound field flux reversal machine
392
Design and Analysis of a New Linear Wound-Field Flux Reversal Machine Based on Magnetic Gear Effect
393
Design and Analysis of a New Loadless 4T SRAM Cell in Deep Submicron CMOS Technologies
394
Design and Analysis of a New Magnetic Gear With Multiple Gear Ratios
395
Design and Analysis of a New Magnetic-Geared Memory Machine
396
Design and analysis of a new microthyristor based SRAM cell
397
Design and Analysis of a New Modular Linear Flux-Reversal Permanent-Magnet Motor
398
Design and analysis of a new multiphase polygonal-winding permanent-magnet brushless DC machine
399
Design and analysis of a new multiphase polygonal-winding permanent-magnet brushless DC machine
400
Design and Analysis of a New Multi-secret Sharing Scheme
401
Design and Analysis of a New Multitoothed Magnetless Doubly Salient Machine
402
Design and analysis of a new parallel grasper having spherical motion
403
Design and analysis of a new permanent magnet brushless DC machine
404
Design and analysis of a new permanent magnet brushless DC machine
405
Design and analysis of a new photonic crystal fiber for fiber based sensor applications
406
Design and analysis of a new piezoelectric MEMS tilt sensor
407
Design and analysis of a new resonant step up/down DC-DC converter
408
Design and Analysis of a New Robotic Mechanism for Lower Limbs Rehabilitation
409
Design and analysis of a new self-routing network
410
Design and Analysis of a New Self-Testing Adder Which Utilizes Polymorphic Gates
411
Design and analysis of a new sequence set by using chaotic dynamic systems for spread spectrum communication applications
412
Design and Analysis of a New Six-DOF Haptic Device for Dental Training
413
Design and analysis of a new six-phase fault-tolerant hybrid-excitation motor for electric vehicle
414
Design and Analysis of a New Six-Phase Fault-Tolerant Hybrid-Excitation Motor for Electric Vehicles
415
Design and analysis of a new soft-switching multi-output Fly-back converter
416
Design and analysis of a new spherical actuator
417
Design and analysis of a new structured adaptive SAW filter
418
Design and analysis of a new sub-threshold DTMOS SRAM cell structure
419
Design and analysis of a newly brushless DC wind generator
420
Design and analysis of a non linear, low confinement loss Photonic Crystal Fiber with Liquid Crystal and air filled holes
421
Design and analysis of a non-backdrivable series elastic actuator
422
Design and analysis of a nonequilibrium cross-coupled network with a detectable similarity measure
423
Design and analysis of a nonlinear controller for a hypersonic wind tunnel
424
Design and analysis of a nonlinear stabilizing controller for a mass structured cell population balance model with input constraints
425
Design and analysis of a nonrational B-spline profiled horn for high displacement amplification
426
Design and Analysis of a Novel
Adaptive Control Architecture With Guaranteed Transient Performance
427
Design and analysis of a novel 12/14 hybrid pole type bearingless switched reluctance motor
428
Design and analysis of a novel 2-DoF rotational decoupled adjusting parallel mechanism
429
Design and Analysis of a Novel 3-D Magnetization Structure for Laminated Silicon Steel
430
Design and analysis of a novel 3-D micromanipulator with large range of motion
431
Design and analysis of a novel 4/5 two-phase switched reluctance motor
432
Design and analysis of a novel 8T SRAM cell for adiabatic and non-adiabatic operations
433
Design and analysis of a novel automatic gain control pre-amplifier circuit for hearing aid device
434
Design and analysis of a novel axial actively regulated slotless skew winding bearingless motor
435
Design and Analysis of a Novel Axial-Flux Electric Machine
436
Design and Analysis of a Novel Axial-Flux Slotless Limited-Angle Torque Motor With Trapezoidal Cross Section for the Stator
437
Design and analysis of a novel bounded nonlinear controller for three-phase ac/dc converters
438
Design and Analysis of a Novel Brushless Wound Rotor Synchronous Machine
439
Design and analysis of a novel brushless wound rotor synchronous machine
440
Design and Analysis of a Novel Chaotic Image Encryption
441
Design and analysis of a novel command governor architecture for shaping the transient response of nonlinear uncertain dynamical systems
442
Design and analysis of a novel compact compliant actuator with variable impedance
443
Design and Analysis of a Novel Compact High Permittivity Dielectric Resonator Antenna
444
Design and analysis of a novel disk permanent magnet generator
445
Design and Analysis of a Novel Disk Permanent Magnet Generator
446
Design and analysis of a novel dual stator axial flux spoke-type ferrite permanent magnet machine
447
Design and analysis of a novel electro-optical MEMS gyroscope for navigation applications
448
Design and Analysis of a Novel Energy Efficient Ethernet Passive Optical Network
449
Design and Analysis of a novel fan-out WLCSP structure
450
Design and analysis of a novel fast packet switch-pipeline banyan
451
Design and analysis of a novel fault tolerant permanent magnet synchronous motor for aircraft application
452
Design and analysis of a novel fiber-based PCS optical network
453
Design and analysis of a novel flexure-based XY micro-positioning stage driven by electromagnetic actuators
454
Design and analysis of a novel flux-modulated permanent magnet linear generator with sandwiched armature stator
455
Design and analysis of a novel flux-switching permanent magnet integrated-starter-generator
456
Design and Analysis of a Novel Grid-Connected to Rotor Type Doubly Fed Induction Machine
457
Design and analysis of a novel Half Jagged Toothed capacitive comb drive with increased efficiency
458
Design and Analysis of a Novel Haptic Device
459
Design and analysis of a novel heliostat structure
460
Design and Analysis of a Novel High Speed Adder Based Hardware Efficient Discrete Cosine Transform (DCT)
461
Design and analysis of a novel Hybrid Excitation Synchronous Generator
462
Design and Analysis of a Novel Hybrid Excitation Synchronous Machine With Asymmetrically Stagger Permanent Magnet
463
Design and Analysis of a Novel Hybrid Excited Linear Flux Switching Permanent Magnet Motor
464
Design and analysis of a novel hybrid permanent magnet memory motor
465
Design and analysis of a novel IMP PM motor for low noise pump
466
Design and analysis of a novel instantaneous frequency measurement module based on the interferometer phase-comparison method
467
Design and analysis of a novel interior permanent magnet machine for hybrid electric vehicle traction
468
Design and analysis of a novel ironless trapezoid winding array with single-sided and well sinusoidal magnetic field
469
Design and Analysis of a Novel L1 Adaptive Controller, Part I: Control Signal and Asymptotic Stability
470
Design and Analysis of a Novel L1 Adaptive Controller, Part II: Guaranteed Transient Performance
471
Design and Analysis of a Novel Linear Transverse Flux Permanent Magnet Motor Using HTS Magnetic Shielding
472
Design and analysis of a novel low actuation voltage capacitive RF MEMS switches
473
Design and analysis of a novel micro-gripper with completely parallel movement of gripping arms
474
Design and analysis of a novel mixed accumulation/inversion mode FD SOI MOSFET
475
Design and Analysis of a Novel Multimode Transmission for a HEV Using a Single Electric Machine
476
Design and analysis of a novel parallel square and cube architecture based on ancient Indian Vedic mathematics
477
Design and analysis of a novel permanent magnet embedded salient pole for wind generator
478
Design and analysis of a novel polarisation splitting directional coupler
479
Design and analysis of a novel probe-feeding method for stacked microstrip patch antennas
480
Design and analysis of a novel quadrotor system - VOOPS
481
Design and analysis of a novel quantum-MOS sense amplifier circuit
482
Design and analysis of a novel reversible encoder/decoder
483
Design and analysis of a novel soft-switched push-pull boost converter
484
Design and analysis of a novel sonar-based obstacle-avoidance system for the visually impaired and unmanned systems
485
Design and analysis of a novel stator hybrid excited doubly salient permanent magnet brushless motor
486
Design and analysis of a novel superconducting generator
487
Design and Analysis of a Novel Targeted Magnetic Fluid Hyperthermia System for Tumor Treatment
488
Design and Analysis of a Novel Transverse-Flux Tubular Linear Machine With Gear-Shaped Teeth Structure
489
Design and Analysis of a Novel Traveling Wave Induction Heating System With Magnetic Slot Wedges for Heating Moving Thin Strips
490
Design and analysis of a novel two DOF thermal micromanipulator
491
Design and analysis of a novel two phase BLDC machine avoiding demagnetization
492
Design and analysis of a novel two-stage electronic ballast for HID lamp
493
Design and analysis of a novel ultra wide-band antenna
494
Design and analysis of a novel vernier reluctance fully superconducting synchronous generator with LTS windings for wind power generation
495
Design and analysis of a novel virtual walking machine
496
Design and analysis of a novel wideband microstrip antenna
497
Design and analysis of a novel wind-power permanent magnet generator with Opposite-rotation dual rotors
498
Design and Analysis of a Novel Wireless Passive Microsensor Based on the SAW Theory
499
Design and analysis of a novel X-Y table
500
Design and analysis of a one-dimensional sea surface simulator using the sum-of-sinusoids principle
501
Design and analysis of a pancake switched reluctance machine for use in household applications
502
Design and analysis of a parallel architecture for distributed radar simulation
503
Design and Analysis of a Parallel Data Distribution Overlay Topology
504
Design and analysis of a parallel hybrid electric vehicle for Indian conditions
505
Design and analysis of a parallel-type gripping and micro-positioning mechanism
506
Design and analysis of a passive pulling type of xylophone-playing robot
507
Design and analysis of a pattern selectable airborne HF antenna
508
Design and analysis of a pentagonal rectenna
509
Design and Analysis of a Performance-Optimized CMOS UWB Distributed LNA
510
Design and analysis of a permanent magnet assisted synchronous reluctance motor
511
Design and analysis of a permanent magnet axial coupling using 3D finite element field computations
512
Design and Analysis of a Permanent Magnet Claw Pole/Transverse Flux Motor with SMC Core
513
Design and analysis of a permanent magnet generator for naval applications
514
Design and analysis of a permanent magnet motor integrated with journal bearing
515
Design and analysis of a permanent magnet motor with SMC core for driving dishwasher pump
516
Design and analysis of a permanent magnet slotted limited-angle torque motor with special tooth-tip structure for torque performance improvement
517
Design and analysis of a permanent magnet spherical actuator
518
Design and Analysis of a Permanent Magnet Spherical Actuator
519
Design and analysis of a Permanent-magnet electrodynamic vibrator
520
Design and analysis of a piano playing robot
521
Design and Analysis of a Piezoelectric Transformer-Based Half-Bridge Resonant Inverter for CCFL Backlight Modules
522
Design and analysis of a piezoelectric ultrasonic transducer for distance measurement
523
Design and analysis of a piezostack driven jetting dispenser for high viscosity adhesives
524
Design and analysis of a pipeline ring protocol
525
Design and analysis of a pipeline ring protocol
526
Design and analysis of a plug-in robust compensator: an application to indirect-field-oriented-control induction machine drives
527
Design and Analysis of a PM Wind Generator with a Soft Magnetic Composite Core
528
Design and analysis of a portable high-speed clock generator
529
Design and analysis of a power-efficient cascode-compensated amplifier
530
Design and analysis of a practical three-phase grid-connected photovoltaic inverter
531
Design and analysis of a proactive application management system (PAMS)
532
Design and analysis of a programmable single-chip architecture for DVB-T base-band receiver
533
Design and analysis of a prototype haptic device for cardiovascular interventions
534
Design and Analysis of a Prototype Linear Motor Driving System for HTS Maglev Transportation
535
Design and analysis of a Pseudo Direct-Drive propulsion motor
536
Design and analysis of a pulse-width-modulated power supply for charging a customized pulse forming network
537
Design and analysis of a PZT-based micromachined acoustic sensor with increased sensitivity
538
Design and Analysis of a QoS Signaling Protocol for Mobile IP Networks
539
Design and analysis of a quad-ferential ampilifer
540
Design and analysis of a quantum dot infrared photodetector for low BER free space optical communication
541
Design and analysis of a quantum dot infrared photodetector for low BER free space optical communication
542
Design and analysis of a quantum-based QoS-aware fair share server for integrated services networks
543
Design and analysis of a quasi colourless multi-wavelength 2-port edge-ROADM
544
Design and analysis of a radial X-band klystron
545
Design and analysis of a rate-based algorithm for active queue management
546
Design and analysis of a real-time quality evaluation index for expressways
547
Design and analysis of a real-time train information system
548
Design and analysis of a reconfigurable dual-beam grating antenna for low-cost millimeter-wave beam-steering
549
Design and Analysis of a Reconfigurable Platform for Frequent Pattern Mining
550
Design and analysis of a reconfigurable robotic gripper for limp material handling
551
Design and analysis of a reduced phase error digital carrier recovery architecture for high-order quadrature amplitude modulation signals
552
Design and analysis of a redundantly actuated parallel mechanism for rapid machining
553
Design and Analysis of a Reflectarray Using Defected Double-Square Rings for Microwave Application
554
Design and Analysis of a Reflectarray Using Slot Antenna Elements for Ka-band SatCom
555
Design and Analysis of a Regenerative Electromagnetic Brake
556
Design and analysis of a regenerative magnetorheological actuator for gait assistance in knee joint
557
Design and analysis of a regulated peak-power tracking system
558
Design and analysis of a resonant inverter fed from a Cûk converter for the conversion of alternative energy directly into commercial supply efficiently
559
Design and Analysis of a Resonant Reactive Shield for a Wireless Power Electric Vehicle
560
Design and analysis of a robotic vehicle for entertainment using balancing mechanism
561
Design and analysis of a robust all-digital clock generation system with a DLL-based TDC
562
Design and Analysis of a Robust and Efficient Block Cipher using Cellular Automata
563
Design and Analysis of a Robust Broadcast Scheme for VANET Safety-Related Services
564
Design and Analysis of a Robust Pipelined Memory System
565
Design and analysis of a robust real-time engine control network
566
Design and Analysis of a Robust, High Speed, Energy Efficient 18 Transistor 1-bit Full Adder Cell, Modified with the Concept of MVT Scheme
567
Design and Analysis of a Robust, Low-cost, Highly Articulated manipulator enabled by jamming of granular media
568
Design and analysis of a rotational leg-type miniature robot with an actuated middle joint and a tail (RoMiRAMT)
569
Design and analysis of a satellite-mount array-fed parabolic antenna by electromagnetic computations
570
Design and analysis of a scalable cache coherence scheme based on clocks and timestamps
571
Design and analysis of a scalable concentrated solar power farm using lightweight heliostats
572
Design and analysis of a scalable kernel for health management of aerospace structures
573
Design and analysis of a scalable terabit multicast packet switch with dual round robin dynamic link reservation
574
Design and Analysis of a Scalable Third-Party Storage Security Protocol
575
Design and Analysis of a Scalable Watermarking Scheme for the Scalable Audio Coder
576
Design and analysis of a secure agent-based mobile bill payment protocol for bulk transactions
577
Design and Analysis of a Secure Routing Protocol Algorithm for Wireless Sensor Networks
578
Design and analysis of a secure two-phase locking protocol
579
Design and Analysis of a Self-Centered Cold Mass Support for the MICE Coupling Magnet
580
Design and Analysis of a Self-Oscillating Class D Audio Amplifier Employing a Hysteretic Comparator
581
Design and Analysis of a Self-Repairing SRAM with On-Chip Monitor and Compensation Circuitry
582
Design and analysis of a self-sensing smart cutting tool integrated piezoelectric films for cutting force monitoring in ultra-precision machining
583
Design and analysis of a self-timed duplex communication system
584
Design and Analysis of a Self-Tuning Proportional and Integral Controller for Active Queue Management Routers to Support TCP Flows
585
Design and analysis of a self-validating pressure transducer
586
Design and Analysis of a Sensing Error-Aware MAC Protocol for Cognitive Radio Networks
587
Design and analysis of a sensorless sliding mode flux observer for induction motor drives
588
Design and analysis of a sequential ring counter for QCA implementation
589
Design and analysis of a service migration framework
590
Design and Analysis of a Silicon-Based Millimeter-Wave Divide-by-3 Injection-Locked Frequency Divider
591
Design and analysis of a simle error control scheme for hybrid ARQ systems
592
Design and analysis of a simple D flip-flop based sequential logic circuits for QCA implementation
593
Design and analysis of a simple UHF passive RFID tag for liquid level monitoring applications
594
Design and analysis of a simpler DC to AC power transfer circuit for residential size photovoltaic panels
595
Design and analysis of a simulated methanol production plant
596
Design and analysis of a single phase slot-less permanent magnet generator
597
Design and Analysis of a Slider-Level Piezoelectric Sensor Array for Head-Disk Contact Detection
598
Design and analysis of a sliding mode controller for systems with hysteresis
599
Design and Analysis of a Slope Voltage Control for a DFIG Wind Power Plant
600
Design and analysis of a smart antenna system for IMT-2000 W-CDMA
601
Design and analysis of a smart power management system for ultracapacitor-powered robotic platform
602
Design and analysis of a soft mobile robot composed of multiple thermally activated joints driven by a single actuator
603
Design and Analysis of a Space Conscious Nonvolatile-RAM File System
604
Design and analysis of a spatial 2-RPU & SPR parallel manipulator with 1T2R-Type
605
Design and analysis of a spatial 3-DOF micromanipulator for tele-operation
606
Design and analysis of a spherical humanoid neck using screw theory
607
Design and Analysis of a Splitting Algorithm for a Multi-packet Reception ALOHA System
608
Design and Analysis of a Spoke Type Motor With Segmented Pushing Permanent Magnet for Concentrating Air-Gap Flux Density
609
Design and analysis of a spread-spectrum communication system with chaos-based variation of both phase-coded carrier and spreading factor
610
Design and Analysis of a Stable Queue Control Scheme for the Internet
611
Design and analysis of a stacked dual-frequency microstrip planar inverted-F antenna for mobile telephone handsets using the FDTD
612
Design and Analysis of a Stage-Scaled Distributed Power Amplifier
613
Design and analysis of a statically balanced direct-drive manipulator
614
Design and Analysis of a Stator-Doubly-Fed Doubly-Salient Permanent-Magnet Machine for Automotive Engines
615
Design and analysis of a stepped frequency ground penetrating radar system
616
Design and Analysis of a Successively Refinable Lattice Quantizer for i.i.d. Gaussian Sources
617
Design and analysis of a sun sensor for planetary rover absolute heading detection
618
Design and analysis of a sustainable oyster aquaculture business for the West and Rhode Rivers
619
Design and analysis of a switched reluctance generator for rural electrification in stand alone wind energy coversion system
620
Design and analysis of a switched reluctance motor for next generation hybrid vehicle without PM materials
621
Design and analysis of a switched reluctance motor with high temperature superconducting windings
622
Design and analysis of a switched-capacitor-based peak detector
623
Design and analysis of a switched-capacitor-based step-up DC/DC converter with continuous input current
624
Design and analysis of a synchronous dram memory module
625
Design and analysis of a synthetic aptamer-based oscillator
626
Design and analysis of a systolic sorting architecture
627
Design and analysis of a tactile sensor used in minimally invasive surgery
628
Design and analysis of a TB/sec memory system
629
Design and analysis of a terahertz bandpass filter
630
Design and analysis of a terahertz resonant tunneling quantum ring in a well photodetector
631
Design and analysis of a terahertz SSPP switch using piezoelectric materials
632
Design and analysis of a third-party security protocol for storage system
633
Design and analysis of a three-DOF underwater manipulator
634
Design and Analysis of a Three-Phase Rotary Transformer for Doubly Fed Induction Generators
635
Design and analysis of a three-phase rotary transformer for doubly fed induction generators
636
Design and Analysis of a Totally Decoupled Flexure-Based XY Parallel Micromanipulator
637
Design and analysis of a touch mode MEMS capacitive pressure sensor for IUPC
638
Design and analysis of a traffic rate controller
639
Design and analysis of a transcutaneous telemetry device for brain stimulator
640
Design and analysis of a transformer-less single-phase grid-tie photovoltaic inverter using boost converter with Immittance conversion topology
641
Design and Analysis of a Transmission Hydraulic System for an Engine-Flywheel Hybrid-Vehicle
642
Design and analysis of a transport-level solution for content-centric VANETs
643
Design and Analysis of a Transversal Filter RFIC in SiGe Technology
644
Design and analysis of a transverse flux machine with soft magnetic composite core
645
Design and analysis of a traveling-wave MESFET with enhanced shielding capabilities
646
Design and analysis of a trellis-based receiver exploiting two co-located antennas with dual polarizations
647
Design and analysis of a triangular prism modular deployable mast
648
Design and Analysis of a Tri-Axis Gyroscope Micromachined by Surface Fabrication
649
Design and Analysis of a Tri-Band Dual-Mode Chip Filter for 60-, 77-, and 100-GHz Applications
650
Design and analysis of a Tri-band G-shaped Monopole antenna for bandwith improvement for wireless applications of measurement parameters in MIMO environment
651
Design and analysis of a tri-band patch antenna for UMTS, WIMAX and WLAN applications
652
Design and analysis of a triple-axis thermal accelerometer
653
Design and Analysis of a Tunable Bandpass Filter Employing RF MEMS Capacitors
654
Design and Analysis of a Tunable Miniaturized-Element Frequency-Selective Surface Without Bias Network
655
Design and analysis of a tunable optical channel drop filter based on high index contrast Si/Air broadband reflectors
656
Design and analysis of a two layered 3-RRR micro/nano manipulating stage
657
Design and Analysis of a Two-Phase Two-Axis-Compensated Compulsaor
658
Design and analysis of a two-phase two-axis-compensated compulsator
659
Design and analysis of a two-stage CMOS op-amp using Silterra´s 0.13 μm technology
660
Design and analysis of a two-stage OTA for sensor interface circuit
661
Design and analysis of a two-stage poppet valve for flow control
662
Design and Analysis of a Typical Fuzzy Controller with General Linear Membership Function
663
Design and analysis of a UAV for skydiving
664
Design and analysis of a ultra-wideband antenna with triple frequency filtering characteristics
665
Design and Analysis of a USB-Key Based Strong Password Authentication Scheme
666
Design and Analysis of a Variable Arc Permanent Magnet Array for Spherical Motor
667
Design and analysis of a variable structure adaptive fuzzy-logic power system stabilizer
668
Design and Analysis of a Variable-Flux Pole-Changing Permanent Magnet Memory Machine
669
Design and analysis of a verification device for the nonlinear vector network analyzer
670
Design and analysis of a vertically taking off and landing amphibian vehicle with duct fan
671
Design and Analysis of a VHF OTA-C Cell for Optimum Phase Response
672
Design and Analysis of a Vibration Isolation System Based on Four-Bar Mechanism Integrated with Shape Memory Alloy Wire
673
Design and analysis of a visible-light-communication enhanced WiFi system
674
Design and analysis of a VoIP based IEEE 802.16e system
675
Design and analysis of a waveguide window for W-Band TWT
676
Design and Analysis of a Waveguide-Sandwich Microwave Filter (Short Papers)
677
Design and analysis of a WBAN-based system for firefighters
678
Design and Analysis of a W-band 9-Element Imaging Array Receiver Using Spatial-Overlapping Super-Pixels in Silicon
679
Design and analysis of a W-Band detector in 0.18-µm SiGe BiCMOS
680
Design and analysis of a W-band multiplier chipset
681
Design and Analysis of a W-Band SiGe Direct-Detection-Based Passive Imaging Receiver
682
Design and analysis of a WDM client server network architecture
683
Design and Analysis of a WDM EPON for Supporting Private Networking and Differentiated Services
684
Design and analysis of a WDMA protocol for passive star-coupled lightwave networks
685
Design and analysis of a wearable antenna system for wireless safety applications
686
Design and Analysis of a Welding Robot
687
Design and analysis of a wide bandwidth immersion MEMS transducer array for fault detection in power cables
688
Design and Analysis of a Wideband 15–35-GHz Quadrature Phase Shifter With Inductive Loading
689
Design and analysis of a wideband LNTA with noise cancellation mechanism
690
Design and analysis of a wiggler magnet system for the PEP-II B-Factory LER
691
Design and Analysis of a WiMAX Mesh Based Cellular Radio Access Networks
692
Design and analysis of a wireless link control scheme for integrated service communications
693
Design and Analysis of a Wireless Switched Digital Video Scheme for Mobile TV Services Over WiMAX Networks
694
Design and analysis of a wireless temperature monitoring system
695
Design and analysis of a wrist-hand manipulator for rehabilitation of upper limb dexterous function
696
Design and analysis of AC/DC converters with interleaved Power Factor Correction
697
Design and analysis of AC/DC converters with interleaved Power Factor Correction
698
Design and analysis of accelerative preallocation protocol for WDM star-coupled networks
699
Design and analysis of acoustic data transmission system for wireless multimedia data transmission
700
Design and analysis of active power control strategies for distributed generation inverters under unbalanced grid faults
701
Design and analysis of active transfemoral prosthesis
702
Design and Analysis of Actively-Deskewed Resonant Clock Networks
703
Design and Analysis of Adaptive Receiver Transmission Protocols for Receiver Blocking Problem in Wireless Ad Hoc Networks
704
Design and analysis of adaptive sliding-mode-like controller for DC-DC converters
705
Design and analysis of adaptive-bandwidth all-digital phase-locked loop
706
Design and analysis of aerospace DC arcing faults using fast fourier transformation and artificial neural network
707
Design and analysis of AES-CBC mode for high security applications
708
Design and analysis of AES-CM with non-linearity S-box architecture
709
Design and Analysis of Ag-
Films as a Multi-Harmonic Suppressor in Wideband Bandpass Filters
710
Design and analysis of air core type permanent magnet linear brushless motor by using equivalent magnetizing current
711
Design and analysis of all-optical ATM switching elements for high speed networks
712
Design and analysis of ALU: Vedic mathematics approach
713
Design and analysis of an ABR flow control protocol
714
Design and analysis of an absolute non-contact orientation sensor for wrist motion control
715
Design and Analysis of an Acknowledgment-Aware Asynchronous MPR MAC Protocol for Distributed WLANs
716
Design and Analysis of an Activator-Repressor Clock in E. Coli
717
Design and analysis of an active predictive algorithm in wireless multicast networks
718
Design and analysis of an actuated endoscopic grasper for manipulation of large body organs
719
Design and analysis of an adaptive compressive sensing architecture for epileptic seizure detection
720
Design and analysis of an adaptive fuzzy power system stabilizer
721
Design and analysis of an adaptive mobility management scheme for handling internet traffic in wireless mesh network
722
Design and analysis of an adaptive transcutaneous power telemetry for biomedical implants
723
Design and analysis of an adaptive, global strategy for detecting and mitigating distributed DoS attacks in grid environments
724
Design and Analysis of an Adjustable Subreflector for the Hybrid Mechanical-Electronic Pointing System at the Satellite Q/V Band
725
Design and analysis of an advanced magnetic variable gear for hybrid electric vehicles
726
Design and analysis of an advanced static blocked multithreading architecture
727
Design and analysis of an air-cored axial flux permanent magnet generator for small wind power application
728
Design and analysis of an all-NbN SIS mixer using a tuning circuit with two half-wavelength distributed junctions
729
Design and analysis of an antenna for batteryless transcranial direct current stimulation devices
730
Design and analysis of an antenna for wireless energy harvesting in a head-mountable DBS device
731
Design and analysis of an anti-slip fuzzy controller for heavy duty off road vehicles
732
Design and Analysis of an Area-Efficient High Holding Voltage ESD Protection Device
733
Design and analysis of an ARQ based symmetric key generation algorithm
734
Design and analysis of an artificial finger joint for anthropomorphic robotic hands
735
Design and analysis of an asymmetric mutation operator
736
Design and analysis of an asymmetrically fed insulated coaxial slot antenna with enhanced tip-heating performance
737
Design and analysis of an asynchronous checkpoint-based redundant multithreading architecture
738
Design and analysis of an asynchronous WDM local area network using a master/slave scheduler
739
Design and Analysis of an ATM Artificial Traffic Generator
740
Design and analysis of an ATM switch based on a distributed network: weaved GSN
741
Design and analysis of an automotive vibration reduction system based on magneto-rheological elastomer
742
Design and analysis of an autonomous controlled four wheeled land yacht
743
Design and Analysis of an Autotransformer Based 24-Pulse Rectifier
744
Design and analysis of an axial flux magnetically geared generator
745
Design and analysis of an axial flux permanent magnet machine
746
Design and analysis of an axial-field permanent magnet generator with multiple stators and rotors
747
Design and analysis of an axial-flux PM vernier machine for auto-focusing systems
748
Design and analysis of an eddy current brake for a high-speed railway train with constant torque control
749
Design and analysis of an efficient algorithm for coordinated checkpointing in distributed systems
750
Design and analysis of an efficient trust management scheme for clustered based MANET using Bayesian method
751
Design and analysis of an elastic mechanism with adjustable zero-to-infinite linear stiffness
752
Design and Analysis of an Electrical Variable Transmission for a Series–Parallel Hybrid Electric Vehicle
753
Design and analysis of an electromagnetic actuator for a magnetic switch
754
Design and analysis of an electromagnetically driven valve for a glaucoma implant
755
Design and Analysis of an Electromechanical Battery for Rural Electrification in Sub-Saharan Africa
756
Design and Analysis of an Electronic Peak-Holding Controller
757
Design and Analysis of an Embedded Accelerometer Coupled Self-Mixing Laser Displacement Sensor
758
Design and analysis of an energy recycling electronic load system
759
Design and analysis of an enhanced MOSFET gate driver for pulsed power applications
760
Design and Analysis of an Enhanced Secure Mechanism of LLRP in RFID Systems
761
Design and analysis of an EPC discovery service based randomized architecture
762
Design and analysis of an e-transaction protocol tailored for OCC
763
Design and analysis of an Event Indicator Function classifier for immune cell tracking applications
764
Design and analysis of an FPGA based encoder SoC for locally stationary image source
765
Design and analysis of an FPGA-based active feedback damping system for the Spallation Neutron Source
766
Design and analysis of an HTS coplanar waveguide branch-line coupler
767
Design and analysis of an HVAC-based heat recovery system
768
Design and analysis of an IC-less self-oscillating series resonant inverter for dimmable electronic ballasts
769
Design and Analysis of an Image Encryption Scheme Based on Chaotic Maps
770
Design and analysis of an image resizing filter in the block-DCT domain
771
Design and analysis of an image restoration using wiener filter with a quality based hybrid algorithms
772
Design and analysis of an image transceiver device with a low cross-talk level
773
Design and analysis of an image-based ACC controller
774
Design and analysis of an impedance tapered conical to coaxial transmission line transition
775
Design and analysis of an improved bitmessage anti-spam mechanism
776
Design and analysis of an improved Halbach tubular linear motor with non-ferromagnetic mover tube for direct-driven EHA
777
Design and Analysis of an Improved Translinear Floating Resistor for a Variable Gain Amplifier
778
Design and analysis of an impulse borehole radar for well logging
779
Design and Analysis of an Injection-Locked Third Harmonic Self-Oscillating Mixer
780
Design and analysis of an innovative modular cubesat structure for ITU-pSAT II
781
Design and Analysis of an Integral Sliding Mode Fault-Tolerant Control Scheme
782
Design and analysis of an integrated 3-DOF sensor for tracking in-plane motion
783
Design and analysis of an integrated checkpointing and recovery scheme for distributed applications
784
Design and analysis of an integrated differential-common mode filter for on site motor bearing problems
785
Design and analysis of an integrated driver for piezoelectric actuators
786
Design and analysis of an integrated optical sensor for scanning force microscopies
787
Design and analysis of an integrated targeting system
788
Design and analysis of an intelligent collision avoidance system for locomotives
789
Design and analysis of an intelligent multicasting routing in all-optical networks with fault tolerance mechanism
790
Design and analysis of an intelligent support system for large databases
791
Design and analysis of an interactive motion simulator with multiple bilateral controllers in virtual entertainment system
792
Design and Analysis of an Interior Permanent Magnet (IPM) Machine With Very Wide Constant Power Operation Range
793
Design and Analysis of an Interior Permanent Magnet (IPM) Machine with Very Wide Constant Power Operation Range
794
Design and analysis of an interleave controlled series buck converter with low load current ripple
795
Design and Analysis of an Interleaved Flyback–Forward Boost Converter With the Current Autobalance Characteristic
796
Design and analysis of an interleaved tapped-inductor boost converter for higher power and voltage gain applications
797
Design and analysis of an IP-Layer anonymizing infrastructure
798
Design and Analysis of an I-shaped TSV Structure for 3D SiP
799
Design and analysis of an MAC-layer protocol for a car-to-infrastructure packet radio network
800
Design and Analysis of an MPPT Technique for Small-Scale Wind Energy Conversion Systems
801
Design and analysis of an MST-based topology control algorithm
802
Design and analysis of an MST-based topology control algorithm
803
Design and analysis of an NoC architecture from performance, reliability and energy perspective
804
Design and analysis of an obstacle-crossing wall-climbing robot mechanism
805
Design and analysis of an ocean current turbine performance assessment system
806
Design and analysis of an optical waveguide tap for silicon CMOS circuits
807
Design and analysis of an optical-powered on-chip power supply
808
Design and analysis of an optimal controller for parallel multi-inverter systems
809
Design and analysis of an optimal hopper for use in resonance-based locomotion
810
Design and analysis of an optimal instruction-retry policy for TMR controller computers
811
Design and analysis of an optimized cavity-backed zigzag Archimedean spiral antenna
812
Design and analysis of an outer rotor flux switching permanent magnet machine for electric vehicle
813
Design and analysis of an outer rotor permanent magnet alternator for low-speed wind turbine
814
Design and Analysis of an Overmoded Slow Wave Structure for High Power Terahertz BWO
815
Design and analysis of an RLS-type modified filtered-x algorithm for adaptive IIR filters
816
Design and analysis of an R-shaped dual-band planar inverted-F antenna for vehicular applications
817
Design and analysis of an SLPT-based CCFL driver
818
Design and analysis of an Ultra - Wideband monopole microstrip antenna
819
Design and analysis of an ultra low-voltage CMOS class-AB V-I converter for dynamic range enhancement
820
Design and Analysis of an Ultra Wideband Matrix Mixer
821
Design and Analysis of an Ultra-Compact and Ultra-Wideband Polarization Beam Splitter Based on Coupled Plasmonic Waveguide Arrays
822
Design and analysis of an ultra-high efficiency phase shifted full bridge GaN converter
823
Design and Analysis of an Ultrahigh-Speed Glitch-Free Fully Differential Charge Pump With Minimum Output Current Variation and Accurate Matching
824
Design and Analysis of an Ultra-Wideband Automatic Self-Calibrating Upconverter in 65-nm CMOS
825
Design and analysis of an ultrawide-band distributed CMOS mixer
826
Design and analysis of an ultrawide-band distributed drain-pumped mixer using 0.18µm CMOS technology
827
Design and analysis of an underactuated anthropomorphic finger for upper limb prosthetics
828
Design and analysis of an under-actuated XYθ stage for automated tissue indentation
829
Design and analysis of an underwater quadrotor - AQUAD
830
Design and Analysis of an Unplated High-Pressure Limited-Area Bolted Electric Joint: A Method of Calculating Various Components of Joint Resistance
831
Design and analysis of an UTeM Antenna
832
Design and Analysis of an X-band Low Noise Amplifier
833
Design and analysis of an X-band MMIC “bus-bar” power combiner
834
Design and Analysis of an XCP-TCP Gateway
835
Design and analysis of analog filtering method for signal injection based sensorless control
836
Design and Analysis of Analog Performance of Dual-k Spacer Underlap N/P-FinFET at 12 nm Gate Length
837
Design and analysis of anchorless shuttle nano-electro-mechanical non-volatile memory for high temperature applications
838
Design and Analysis of Annular Linear Induction Pump (ALIP)
839
Design and analysis of annular photonic crystal and Bragg resonators by coupled waves approach
840
Design and analysis of antenna array for personal handy phone use
841
Design and analysis of antenna systems properly integrated into a spacecraft structure
842
Design and analysis of anti spamming SMS to prevent criminal deception and billing froud: Case Telkom Flexi
843
Design and analysis of application benchmark for enterprise server evaluation
844
Design and Analysis of Approximate Compressors for Multiplication
845
Design and analysis of arbitration protocols
846
Design and analysis of area-IO DRAM/logic integration with system-in-a-package (SiP)
847
Design and analysis of arrangement graph-based overlay systems for information sharing
848
Design and analysis of asymmetrical rotor for induction motors
849
Design and analysis of asynchronous adders
850
Design and Analysis of Asynchronous Incoherent Optical-CDMA Systems Using a New Code-Shifting Technique
851
Design and analysis of asynchronous wakeup for wireless sensor networks
852
Design and analysis of athermal silica-based PLC devices using bimetal plate temperature compensator
853
Design and analysis of ATM networks with fluid flow sources
854
Design and analysis of auto-focus assembly for spaceborne remote sensing camera
855
Design and analysis of automated manufacturing systems with roles: an object-oriented approach
856
Design and analysis of automotive HID lamp ballast system using auxiliary winding
857
Design and analysis of automotive high intensity discharge lamp ballast using micro controller unit
858
Design and analysis of autopilot based on adaptive control
859
Design and Analysis of Aviation Human Factors KMS
860
Design and analysis of axial flux permanent magnet BLDC motor for automotive applications
861
Design and Analysis of Axial Permanent Magnet
Couplings Based on 3D FEM
862
Design and Analysis of Backoff Algorithms for Random Access Channels in UMTS-LTE and IEEE 802.16 Systems
863
Design and analysis of backward wave folded waveguide travelling wave tube
864
Design and analysis of bandpass waveguide filters using novel complementary split ring resonators
865
Design and analysis of Bayesian game in role based trust management
866
Design and analysis of beam apodizers using error diffusion
867
Design and analysis of Bessel resonator at THz
868
Design and analysis of bilinear digital ladder filters
869
Design and analysis of Bistable MEMS switch
870
Design and analysis of bit interleaved coded space-time modulation
871
Design and Analysis of Bit Selections in HARQ Algorithm for Hybrid FSO/RF Channels
872
Design and Analysis of Bit-Interleaved Coded Modulation With Pseudorandom Sequence
873
Design and Analysis of Block-Level Snapshots for Data Protection and Recovery
874
Design and analysis of boiler-turbine-generator controls using optimal linear regulator theory
875
Design and analysis of Brewster´s angle polariser using inhomogeneous planar layers and Hill´s method
876
Design and analysis of broadband acoustic silencers
877
Design and Analysis of Broadband Beamspace Adaptive Arrays
878
Design and Analysis of Broadband Darlington Amplifiers With Bandwidth Enhancement in GaAs pHEMT Technology
879
Design and Analysis of Broadband Dual-Gate Balanced Low-Noise Amplifiers
880
Design and analysis of broadband high isolation of discrete packaged PIN diode SPDT switch for wireless data communication
881
Design and analysis of broadband high-gain and omnidirectional printed antenna with radiated loads
882
Design and analysis of broadband notch antennas and arrays
883
Design and analysis of brushless DC machines
884
Design and analysis of brushless doubly fed reluctance machine suitable for wind generation applications
885
Design and Analysis of Brushless Doubly Fed Reluctance Machines
886
Design and analysis of Brushless Doubly Fed Reluctance Machines
887
Design and analysis of Brushless servomotor for In-service Inspection of PFBR
888
Design and analysis of buck converter with pulse-skipping modulation
889
Design and analysis of buffered crossbars and banyans with cut-through switching
890
Design and analysis of bypassing multipler
891
Design and analysis of cable-connected metallic bellows as Variable Buoyancy Modules
892
Design and analysis of cache coherent multistage interconnection networks
893
Design and analysis of Carry Bypass Adder using CNTFET
894
Design and analysis of cascading adaptive filters for active narrowband noise control
895
Design and analysis of cellular mobile communications system based on DQRAP/CDMA MAC protocol
896
Design and analysis of centralized wireless positioning system based on ZigBee
897
Design and analysis of CentrUMS-ITB unmanned semi-submersible vehicle
898
Design and analysis of channel adaptive wireless cache invalidation strategies with downlink traffic
899
Design and Analysis of Channel Estimation for Multi-Band OFDM-UWB Systems
900
Design and analysis of channel-phase-precoded ultra wideband (CPPUWB) systems
901
Design and analysis of characteristics of damping hole for a fuel metering valve
902
Design and analysis of charge pump for PLL at 90nm CMOS technology
903
Design and analysis of charge-pump based buck converter
904
Design and analysis of clamper for short circuit ground wire
905
Design and analysis of class DE amplifier with any output Q, any duty ratio and switch on resistance
906
Design and Analysis of Class E/F
Power Amplifier with Nonlinear Shunt Capacitance at Nonoptimum Operation
907
Design and Analysis of Classifier Learning Experiments in Bioinformatics: Survey and Case Studies
908
Design and Analysis Of Clock Recovery System For Digital Vcr From Baseband EFM Transmission With Charge Pump PLL
909
Design and analysis of close-ratio two-speed shaded-pole induction motors
910
Design and analysis of clusters with single I/O space
911
Design and analysis of CMOS analog signal processing circuits by means of a graphical MOST model
912
Design and analysis of CMOS broad-band compact high-linearity modulators for gigabit microwave/millimeter-wave applications
913
Design and Analysis of CMOS Frequency Dividers With Wide Input Locking Ranges
914
Design and Analysis of CMOS High-Speed High Dynamic-Range Track-and-Hold Amplifiers
915
Design and analysis of CMOS ring oscillator using 45 nm technology
916
Design and Analysis of CMOS Subharmonic Injection-Locked Frequency Triplers
917
Design and Analysis of CMOS-Based Terahertz Integrated Circuits by Causal Fractional-Order RLGC Transmission Line Model
918
Design and Analysis of CMOS-Controlled Tunable Photodetectors for Multiwavelength Discrimination
919
Design and analysis of coaxial magnetic gear considering rotor losses
920
Design and Analysis of Coaxial Magnetic Gears Considering Rotor Losses
921
Design and analysis of code distribution systems with active networks
922
Design and analysis of coded multiplexing for the multiuser OFDM downlink
923
Design and analysis of collaborative diversity protocols for wireless sensor networks
924
Design and analysis of communication network for distributed SCADA system [for electric railways]
925
Design and analysis of Community Distance-based forwarding protocols for opportunistic network
926
Design and Analysis of Compact and Broadband High Gain Micro strip Patch Antennas
927
Design and analysis of compact and multi-band circular antennas
928
Design and analysis of compact dictionaries for diagnosis in scan-BIST
929
Design and analysis of compact printed coplanar waveguide-fed integrated Bluetooth and UWB antenna
930
Design and Analysis of Compact Printed Triple Band-Notched UWB Antenna
931
Design and analysis of compact ultra Energy-Efficient logic gates using laterally-actuated double-electrode NEMS
932
Design and analysis of compact unequal-split Wilkinson power divider using non-uniform transmission lines
933
Design and analysis of completely adiabatic tapered waveguides by conformal mapping
934
Design and analysis of completely restrained cable manipulators with 3 Degrees of Freedom
935
Design and analysis of complex impedance standard
936
Design and analysis of composite filter for power quality improvement of electric arc furnace
937
Design and Analysis Of composite material bipolar plate pressure injection molding based on Pro/ENGNEER
938
Design and Analysis of Compound-Structure Permanent-Magnet Synchronous Machine Used for Hybrid Electric Vehicles
939
Design and analysis of compress-and-forward cooperation in a virtual-MIMO detection system
940
Design and Analysis of Compressed Sensing Radar Detectors
941
Design and analysis of Compress-Encrypt-Stego technique for steganography
942
Design and Analysis of Compressive Data Persistence in Large-Scale Wireless Sensor Networks
943
Design and analysis of compressors using CNTFET
944
Design and analysis of computer-aided cart systems for picking discrete items
945
Design and analysis of concatenated coded DS/CDMA systems in asynchronous channels
946
Design and analysis of conflict resolution algorithms via positive semidefinite programming [aircraft conflict resolution]
947
Design and analysis of conformal ku-band microstrip patch antenna arrays
948
Design and analysis of connected dominating set formation for topology control in wireless ad hoc networks
949
Design and analysis of contention-based request schemes for best-effort traffics in IEEE 802.16 networks
950
Design and analysis of contour-independent features for classification of mammographic lesions
951
Design and analysis of control system of a proton exchange membrane fuel cell directly connected with a DC motor
952
Design and analysis of control systems [breaker page]
953
Design and analysis of controller for three-phase UPS system
954
Design and analysis of controllers for discontinuous dynamic systems by reshaping of Poincare map
955
Design and analysis of conveyor chain for automatic ammunition loading machine
956
Design and analysis of cooperative and non cooperative stigmergy-based models for foraging
957
Design and analysis of cooperative mobile multicast protocol (CMMP) for intermittent network connectivity
958
Design and analysis of coordinated access schemes for code-limited optical-CDMA networks
959
Design and analysis of coplanar Lange coupler for millimetre-wave applications up to 90 GHz
960
Design and Analysis of Copper and Aluminum Interconnects for All-Spin Logic
961
Design and analysis of Costas/PSK RF stealth signal waveform
962
Design and Analysis of Cost-Cognizant Test Case Prioritization Using Genetic Algorithm with Test History
963
Design and analysis of cost-efficient IFFT/FFT processor chip for wireless OFDM systems
964
Design and analysis of coupled inductor bidirectional DC-DC convertor for high-voltage diversity applications
965
Design and analysis of coupling elements between optical fibres and optical free space
966
Design and analysis of CPW-fed quasi-self-complementary pentagonal antenna for ultra-wideband systems
967
Design and Analysis of Cross Cage Dipole Antenna
968
Design and analysis of crossbar circuits for molecular nanoelectronics
969
Design and analysis of cross-coupled 2 DOFs planar direct drive motor
970
Design and Analysis of Cross-Layer Contention Resolution Algorithms for Multi-Packet Reception Slotted ALOHA Systems
971
Design and Analysis of Cross-Layer Contention Resolution Algorithms for Multi-Packet Reception Slotted ALOHA Systems
972
Design and Analysis of Cross-Layer Tree Algorithms for Wireless Random Access
973
Design and analysis of CSAF based on SMES
974
Design and analysis of cuboid film resonator for wireless power transmission System based on resonant coupling
975
Design and analysis of current control for shunt active filter based on repetitive control technique using optimization in the frequency domain
976
Design and analysis of current controllers with active damped LCL filter for three-phase grid connected solar PV system
977
Design and analysis of current error based sampled-data ILC with application to position tracking control of DC motors
978
Design and analysis of cylindrical antiresonant reflecting optical waveguide
979
Design and Analysis of Cylindrical Dielectric Resonator Antenna Using Substrate Integrated Waveguide for X-Band Application
980
Design and analysis of data management in scalable parallel scripting
981
Design and Analysis of Data-Aided Coarse Carrier Frequency Recovery in DVB-S2
982
Design and analysis of DBMAC, an error localizing message authentication code
983
Design and analysis of DC-to-14-GHz and 22-GHz CMOS cascode
984
Design and analysis of defect tolerant hierarchical sorting networks
985
Design and analysis of defect tolerant hierarchical sorting networks
986
Design and analysis of defected ground structure (DGS) in normal mode helical antenna
987
Design and Analysis of Defection-Proof MAC Protocols Using a Repeated Game Framework
988
Design and analysis of delay-sensitive cross-layer OFDMA systems with outdated CSIT
989
Design and analysis of delay-sensitive decentralized cross-layer OFDMA systems with efficient feedback algorithm
990
Design and Analysis of Delay-Tolerant Sensor Networks for Monitoring and Tracking Free-Roaming Animals
991
Design and analysis of delta modulated PWM inverter with regulated output voltage for 1-φ induction motor drives
992
Design and analysis of delta-sigma based IIR filters
993
Design and Analysis of Deterministic Distributed Beamforming Algorithms in the Presence of Noise
994
Design and analysis of dielectric loaded cavity backed aperture antennas using transmission-line modelling (TLM)
995
Design and analysis of dielectric resonator-microstrip interactive circuits
996
Design and Analysis of Different Line-Start PM Synchronous Motors for Oil-Pump Applications
997
Design and analysis of different structure of a coreless planar transformer for a flyback converter
998
Design and analysis of different types SRAM cell topologies
999
Design and analysis of different types SRAM cell topologies
1000
Design and analysis of differential multiphase DLL for jitter and power optimization
