<< مقالات لاتين فني مهندسي >>
<< بر اساس عنوان >>
1
Evaluation of capacitance displacement sensors used for slider-disk spacing measurements in magnetic disk drives
2
Evaluation of capacitance matrix of a finite-length multiconductor transmission line
3
Evaluation of capacitance with prescribed accuracy adaptive method based on exact error estimation
4
Evaluation of Capacitor Commutated Converter HVDC for Qinghai-Xizhang Interconnection Project
5
Evaluation of capacitor ratios in automated accurate common-centroid capacitor arrays
6
Evaluation of capacitors at cryogenic temperatures for space applications
7
Evaluation of capacity differences
8
Evaluation of Capacity Differences in the Economic Comparison of Alternative Facilities [includes discussion]
9
Evaluation of capacity equation only based on S-parameter for realistic MIMO antenna
10
Evaluation of capacity for CDMA systems on frequency-selective fading channels
11
Evaluation of capacity of indoor MIMO channel with different antennas array
12
Evaluation of capacity of indoor wireless MIMO channel using ray tracing
13
Evaluation of capacity planning practices for the semiconductor industry
14
Evaluation of capture effect in LEO satellite channel
15
Evaluation of carbon fiber microelectrodes in in-vivo measurements
16
Evaluation of carbon nanotubes as gas sensing materials in micro gas sensors
17
Evaluation of carbon nanotubes for THz photomixing
18
Evaluation of Carbonaceous Impurities in As-Produced Single-Walled Carbon Nanotubes by Solution-Phase Spectrophotometry
19
Evaluation Of Carbon-Nitrogen Films As Wear-protective Coatings On Thin Film Media and Thin Film Head SIiders
20
Evaluation of cardiac function based on ventricular pressure-volume relationships during assistance with a rotary blood pump
21
Evaluation of cardiac function from short-axis cardiac magnetic resonance images using automatic boundary extraction
22
Evaluation of cardiac left ventricular mass from Tagged Magnetic Resonance Imaging
23
Evaluation of cardiac motion in bi-dimensional echocardiography
24
Evaluation of cardiac oxygen consumption under hypoxia with tissue model integrating microcirculation model and cell model
25
Evaluation of cardiac PET-MRI registration methods using a numerical breathing phantom
26
Evaluation of Cardinality Constraints on SMT-Based Debugging
27
Evaluation of cardiovascular function in small animals using a microcomputer-based scintigraphic imaging system
28
Evaluation of Cardiovascular Stents as Antennas for Implantable Wireless Applications
29
Evaluation of carotene content and antibacterial effect of microwave heated and conventionally heated red palm oil
30
Evaluation of Carrier Collection Efficiency in Multiple Quantum Well Solar Cells
31
Evaluation of Carrier-Based PWM Methods for Multi-level Inverters
32
Evaluation of carrier-based PWM strategies for multi-state switching cells-based multilevel three-phase rectifiers
33
Evaluation of carrier-envelope phase fluctuation in amplified pulse by using interference between harmonics generated on solid surface
34
Evaluation of cascade-multilevel converter based STATCOM for arc fumace flicker mitigation
35
Evaluation of Cascade-Multilevel-Converter-Based STATCOM for Arc Furnace Flicker Mitigation
36
Evaluation of cascading failure in power system based on the operational reliability theory
37
Evaluation of causality measures based on non-uniform embedding schemes with application to the cardiovascular system
38
Evaluation of caustics for parabolic reflector antennas through focal region ray tracings
39
Evaluation of CBERS-2 CCD data for agricultural monitoring
40
Evaluation of CCSDS file delivery protocol over Delay Tolerant Networks
41
Evaluation of CDMA2000 support for IP micromobility handover and paging protocols
42
Evaluation of CDMA450 as communications technology for smart Grid applications
43
Evaluation of CdS nanostructures for application to low environmental-load CdS/CdTe solar cells
44
Evaluation of CdTe for use in a prototype emission/transmission CT imaging system
45
Evaluation of CdZnTe detector for personal surveymeter applications
46
Evaluation of CdZnTe detectors for soft X-Ray applications
47
Evaluation of CdZnTe detectors using crystals grown by the modified vertical bridgman technique
48
Evaluation of CeF/sub 3/ as a scintillator for high speed dynamic PET imaging
49
Evaluation Of CeF
3
As A Scintillator For High Speed Dynamic PET Imaging
50
Evaluation of cell balancing solution with a custom energy measurement device design
51
Evaluation of cell characteristics by opto-electrostatic micromanipulation
52
Evaluation of cell characteristics by step-wise orientational rotation using optoelectrostatic micromanipulation
53
Evaluation of cell coverage and throughput in the multihop CDMA cellular network
54
Evaluation of cell damage induced by electron beam
55
Evaluation of cell deformability through micro fluidic channel
56
Evaluation of cell impedance using a μ-channel
57
Evaluation of cell selection algorithms in LTE-Advanced relay networks
58
Evaluation of cell state techniques for optimal controller design
59
Evaluation of cell to module losses for n-type IBC solar cells assembled with state of the art consumables and production equipment
60
Evaluation of Cell Velocity Regulation in a Microfabricated Adhesion-Based Cell Separation Device
61
Evaluation of cell-cell or cell-substrate adhesion effect on cellular differentiation using a microwell array having convertible culture surface
62
Evaluation of cellular behavior in a multilayer structured tubular tissue with the PLCL scaffold
63
Evaluation of cellular coverage solutions for an indoor DECT system using a 3D ray tracing technique
64
Evaluation of cellular distributed power control algorithms in wireless ad hoc networks
65
Evaluation of cellular mobile telephone data receivers
66
Evaluation of cellular mobile telephone data receivers
67
Evaluation of cellular networks in Underwater acoustic communication
68
Evaluation of cellular phone antennas and the advantages of using internal antennas
69
Evaluation of cellulose-based separators in cycle and wet life testing of alkaline rechargeable cells
70
Evaluation of center-line extraction algorithms in quantitative coronary angiography
71
Evaluation of centralized and distributed microgrid topologies and comparison to Open Energy Systems (OES)
72
Evaluation of centralized solution methods for the dynamic optical bypassing problem
73
Evaluation of cepstral analysis of EHG signals to prediction of preterm labor
74
Evaluation of Cerenkov second harmonic generation in planar waveguides in the Fourier domain
75
Evaluation of cerium doped lutetium oxyorthosilicate (LSO) scintillation crystals for PET
76
Evaluation of cerium doped lutetium oxyorthosilicate (LSO) scintillation crystals for PET
77
Evaluation of certain integrals using stochastic formulation of the lossy wave equation
78
Evaluation of Certain Physicochemical and Thin Film Parameters Including Bioelectronics Properties of Human Fat Containing Adipose Tissues for Early Detection Obesity in Children
79
Evaluation of certificate revocation policies: OCSP vs. Overissued-CRL
80
Evaluation of CFAR and texture based target detection statistics on SAR imagery
81
Evaluation of CFD sub-models for in-cylinder light-duty diesel engine simulation
82
Evaluation of CFO for medium voltage insulators submitted to non-standard impulse shapes experimental results
83
Evaluation of CFR and FFR parameters by CFD modeling of the flow in a stenosed coronary artery
84
Evaluation of chalkiness in basmati rice by virtual instrumentation
85
Evaluation of change detection techniques in simulated mammography
86
Evaluation of changes in climatic indices using combined analysis of remote sensing and GIS
87
Evaluation of channel allocation with distributed control scheme for street microcellular systems
88
Evaluation of channel assignment performance prediction techniques in random wireless mesh networks
89
Evaluation of channel assignment strategies for TIA IS-54 system
90
Evaluation of Channel Availability for Mobile Device by Using a TV White Space Database Qualified by the Ofcom
91
Evaluation of channel capacity in a generalized fading channel
92
Evaluation of channel capacity of the OAM-based FSO links with a precise assessment of turbulence impact
93
Evaluation of channel coding, modulation and interference of digital ATV terrestrial transmission systems
94
Evaluation of channel estimation error inflicted by nonlinear amplification and of its recovery by the means of iterative algorithm
95
Evaluation of channel properties by metal insulator semiconductor measurements
96
Evaluation of Chaotic Map Lattice systems for image encryption
97
Evaluation of Character Recognisers: Artificial Neural Network and Nearest Neighbour Approach
98
Evaluation of character recognition systems
99
Evaluation of characteristic frequency features in healthy and diseased ECG via k-NN classifier
100
Evaluation of Characteristics of Transcutaneous Thin Transformer Utilizing Amorphous Magnetic Fiber for Implantable Artificial Heart
101
Evaluation of charge build-up in wafer processing by using MOS capacitors with charge collecting electrodes
102
Evaluation of charge drives for scanning probe microscope positioning stages
103
Evaluation of charge recovery circuits and adiabatic switching for low power CMOS design
104
Evaluation of charges for power transmission and losses in bilateral power contracts
105
Evaluation of charging damage caused by the pattern structures during Al etching
106
Evaluation of charging damage in a plasma doping system
107
Evaluation of charging effects during X-ray photoelectron spectroscopy measurements of ultra-thin SiO
2
/Si interfaces
108
Evaluation of checkpoint mechanisms for massively parallel machines
109
Evaluation of Chemical Emergency Operation considering behavioral effect
110
Evaluation of chemical lasers based on ClN
3
111
Evaluation of chemical potential for graphene optical modulators based on the semiconductor-metal transition
112
Evaluation of chemical reaction kinetics using a thermally active piezoresistive microcantilever array
113
Evaluation of chemical shift imaging using a two-dimensional PRESSCS1 sequence: work in progress
114
Evaluation of chin EMG activity at sleep onset and termination in obstructive sleep apnea syndrome
115
Evaluation of China Petrochemical Industry Performance: An Empirical Study Based on DEA Method
116
Evaluation of China´s Oil Security Based on Support Vector Machine (SVM) Theory
117
Evaluation of China-Based Top B-to-B Commercial Websites Based on AHP-Fuzzy
118
Evaluation of Chinese Character Keyboards
119
Evaluation of Chinese Fashion B2C E-commerce Website Based on AHP
120
Evaluation of Chinese money funds´ performance
121
Evaluation of Chinese Sign Language Animation for Mammography Inspection of Hearing-Impaired People
122
Evaluation of Chip LED Sensor Module for Fat Thickness Measurement using Tissue Phantoms
123
Evaluation of chip passivation and coatings using special purpose assembly test chips and porous silicon moisture detectors
124
Evaluation of chip space-time block coding DS-WCDMA in time-varying channels
125
Evaluation of chip temperature for multichip IGBT modules by using the thermo-sensitive electrical parameter (TSEP)
126
Evaluation of chip-to-board interconnection using variable aspect ratio contact pad areas
127
Evaluation of chirp and binary code based excitation pulses for 3D USCT
128
Evaluation of chirp detector-based travelling wave localization of earth faults in MV networks
129
Evaluation of Chirp Reduction in Polymer-Based Tunable External-Cavity Lasers
130
Evaluation of Chirp-Managed Lasers in a Dispersion Managed DWDM Transmission over 24 Spans
131
Evaluation of Chlorophyll-Related Vegetation Indices Using Simulated Sentinel-2 Data for Estimation of Crop Fraction of Absorbed Photosynthetically Active Radiation
132
Evaluation of chromatic dispersion in erbium doped fibre amplifiers
133
Evaluation of chromatic dispersion in erbium-doped fibers
134
Evaluation of CIGS cell interconnection methods
135
Evaluation of Cinema Website
136
Evaluation of CINR in multiple HAP constellations considering terrain configuration
137
Evaluation of circadian clock model based on orbital stability
138
Evaluation of circadian oscillation of the autonomic nervous system by spectral analysis of heart rate variability
139
Evaluation of circuit approaches in partially depleted SOI-CMOS
140
Evaluation of circuit reliability based on distribution of different signal input patterns
141
Evaluation of circuit styles and VLSI logic designs of pentacene OTFTs
142
Evaluation of circular aperture transmission coefficients in the presence of obscurations
143
Evaluation of Circularly Polarized TV Antenna Systems
144
Evaluation of Circumferential and Longitudinal Strain in a Rabbit Fetal Heart Model Using 4D Echocardiography
145
Evaluation of City Green Logistics Status Based on Entropy Right TOPSIS
146
Evaluation of Classic and Innovative Sideband-Based Broken Bar Indicators by Using an Experimental Cage and a Transformed (n, m) Complex Model
147
Evaluation of Classical and Fuzzy Logic Controllers for Wind Turbine Yaw Control
148
Evaluation of classification methods for on-line identification of power system dynamic signature
149
Evaluation of classification models for language processing
150
Evaluation of classification performance for randomly dithered carrier centre frequency in SAR systems
151
Evaluation Of Classification Results Obtained With Combined Multitemporal Optical And Microwave Data
152
Evaluation of classification strategies using quantitative ultrasound markers and a thyroid cancer rodent model
153
Evaluation of classification techniques for audio indexing
154
Evaluation of Classified Cloning Scheme with self-similar traffic
155
Evaluation of classifier performance in descrete pattern recognition problem
156
Evaluation of classifier topologies for the real-time classification of simultaneous limb motions
157
Evaluation of Classifiers Based on Decision Tree for Learning Medical Claim Process
158
Evaluation of classifiers for computer-aided detection in computed tomography colonography
159
Evaluation of classifiers for polarimetric SAR classification
160
Evaluation of classifiers in a pressure and latency-based typing biometric system
161
Evaluation of Classifiers to a Childhood Pneumonia Computer-Aided Diagnosis System
162
Evaluation of Classroom Teaching Quality in Universities Based on Artificial Neural Network
163
Evaluation of cleaning in electronics production process
164
Evaluation of cleanroom/ESD garment fabrics: test methods and results
165
Evaluation Of Clinical Competence By A.I. Methods
166
Evaluation of clinical PET count rate performance
167
Evaluation of clinical PET count rate performance
168
Evaluation of Clipped-OFDM and SC/FDE Alternatives for Block Transmission Using Iterative Receiver Techniques
169
Evaluation of clipping effect on OFDM signals for visible light communications
170
Evaluation of clock distribution networks´ most likely faults and produced effects
171
Evaluation of clock synchronization accuracy of coexistent Real-Time Ethernet protocols
172
Evaluation of clock synchronization methods for measurement and control using embedded Linux SBCs
173
Evaluation of clock synchronization protocols for Wireless Sensor Networks
174
Evaluation of close loop digital control based in a microcontroller and used to eliminate acoustic resonances in HID lamps
175
Evaluation of closed loop sensitivity to model uncertainty
176
Evaluation of closed-form crosstalk models of coupled transmission lines
177
Evaluation of closely coupled systems for high performance database processing
178
Evaluation of cloud liquid absorption models at 90 and 150 GHz
179
Evaluation Of Cloud Motion Vectors
180
Evaluation of Cloud Providers for VPH Applications
181
Evaluation of Cloud-RAID: A Secure and Reliable Storage above the Clouds
182
Evaluation of Cluster Analysis Algorithms Enhanced by Using R*-Trees
183
Evaluation of cluster combination functions for mixture of experts
184
Evaluation of cluster interconnects for a distributed shared memory
185
Evaluation of cluster tool throughput for thin film head production
186
Evaluation of clustered enterprises´ knowledge management based on weighted grey relational model
187
Evaluation of Clustered PV Systems Output Control
188
Evaluation of clustering algorithms for Polish Word Sense Disambiguation
189
Evaluation of clustering and multi-hop routing protocols in Mobile Ad-hoc Sensor Networks
190
Evaluation of clustering and summarizing in distributed latent semantic indexing
191
Evaluation of clustering methods for finding dominant optical flow fields in crowded scenes
192
Evaluation of clustering performance of hyperspectral bands
193
Evaluation of Clustering Techniques for Efficient Searching in JXTA-based P2P Systems
194
Evaluation of Clusterings -- Metrics and Visual Support
195
Evaluation of CM^3: Front-End Problem Management within Industry
196
Evaluation of CMC at a specified reset flux density for soft magnetic cores at high frequencies
197
Evaluation of CMOS APS imager for digital radiography and mammography
198
Evaluation of CMOS differential transmission lines as two-port networks with on-chip baluns in millimeter-wave band
199
Evaluation of CMOS power amplifier for millimeter super broadband wireless systems with beam forming antenna
200
Evaluation of CMOS/SOI Devices on Plasma-Thinned Bonded Silicon Wafers
201
Evaluation of CMUT annular arrays for side-looking IVUS
202
Evaluation of CMUT annular arrays for side-looking IVUS
203
Evaluation of CNN template robustness towards VLSI implementation
204
Evaluation of CNR statistics for satellite link with multiple countermeasures
205
Evaluation of CO
2
Dilution in Ocean sequestration
206
Evaluation of Coal Bed Methane Resource Based on Mapgis in Hancheng Mining Area
207
Evaluation of coal gangue and ash for calcined kaolin preparation
208
Evaluation of Coal Utilization Efficiency of Regions in China
209
Evaluation of coastal vulnerability with mobile laser scanning from a vessel
210
Evaluation of Coatings Applied to Flexible Substrates to Enhance Quality of Ink Jet Printed Silver Nano-Particle Structures
211
Evaluation of coaxial lightning protector for VHF antenna and its implementation in combat tank
212
Evaluation of coaxial single range thermal voltage converters with multijunction thin-film thermoelements
213
Evaluation of Coaxial Slotted-Line Impedance Measurements
214
Evaluation of coaxial V-connector LRL impedance standards for the 65 GHz vector network analyzer
215
Evaluation of cobweb organization structure for Equipment Efficient Support system based on entropy theory
216
Evaluation of Co-channel and Adjacent Channel Interference for Multiple Bluetooth Piconets with Dual Channel Transmission
217
Evaluation of cochlear blood flow measurement by laser Doppler flowmetry
218
Evaluation of cockpit design by using quantitative and qualitative tools
219
Evaluation of code division multiple access systems
220
Evaluation of code generation strategies for scalar replaced codes in fine-grain configurable architectures
221
Evaluation of coded CDMA with interference cancellation
222
Evaluation of coded OFDM systems using different type of codes
223
Evaluation of coded structured light methods using ground truth
224
Evaluation of codes and primitives: recognition of unconstrained handwritten numerals
225
Evaluation of coding and modulation schemes based on Golay complementary sequences for efficient OFDM transmission
226
Evaluation of coding´s methods for the development of a radar sensor for localization and communication dedicated to guided transport
227
Evaluation of coefficient sensitivities for 2nd-order digital resonators
228
Evaluation of COFDM for ATV transmission over 6 MHz channels
229
Evaluation of cofired platinum /alumina high density feedthrough for implantable neurostimulator applications
230
Evaluation of cognitive function for Amyotrophic Lateral Sclerosis with Event-related potentials
231
Evaluation of cognitive function for elderly using event-related potential (P300 and CNV)
232
Evaluation of cognitive function in migraine patients-a study using event-related potential
233
Evaluation of cognitive radio for mission-critical and time-critical WSAN in industrial environments under interference
234
Evaluation of Cognitive Wireless Based Delay Tolerant Network for Disaster Information System in a Rural Area
235
Evaluation of Cognitive Wireless Networks in Rural Area for Disaster Information Network
236
Evaluation of coherent netted radar carrier stability while synchronised with GPS-disciplined oscillators
237
Evaluation of coincidence plane definitions for improved volume resolution in PET
238
Evaluation of coincidence plane definitions for improved volume resolution uniformity in PET
239
Evaluation of cold plasma treatment and safety in disinfecting 21-day root canal enterococcus faecalis biofilm in vitro
240
Evaluation of Collaborative Activities in Medical Simulators Based on Virtual Reality
241
Evaluation of collagen-elastin hybrid tissue engineered vascular constructs
242
Evaluation of Collapsing Losses in Digital Radar Detection
243
Evaluation of collapsing methods for fault diagnosis
244
Evaluation of Collective Taxi Systems by Discrete-Event Simulation
245
Evaluation of College Students´ Quality on PCA-BP Neural Networks
246
Evaluation of collimation and imaging configuration in scintimammography
247
Evaluation of collimator-detector response compensation in tumor SPECT using medium- and high-energy collimators
248
Evaluation of collision alerting system requirements for paired approach
249
Evaluation of Collision Avoidance path planning Algorithm
250
Evaluation of collision frequency in high-pressure glow discharges
251
Evaluation of collisions between polygonal models in virtual assembly
252
Evaluation of collusion resistance on trust management systems for VANETs
253
Evaluation of color descriptors for object and scene recognition
254
Evaluation of Color Rendering of Glossy Ink-Jet Paper Based on Fuzzy Decision
255
Evaluation of color space for segmentation in robot soccer
256
Evaluation of color spaces for edge classification in outdoor scenes
257
Evaluation of Color Spaces for Feature Point Detection in Image Matching Application
258
Evaluation of color spaces for person re-identification
259
Evaluation of color spaces for robust image segmentation
260
Evaluation of Color Spatio-Temporal Interest Points for Human Action Recognition
261
Evaluation of Color STIPs for Human Action Recognition
262
Evaluation of color transfer and denoising methods for motion blur prevention
263
Evaluation of Color-Difference Formulae Based on Small Color Difference Data by Printed Sample
264
Evaluation of colour fidelity based colour rendering indices
265
Evaluation of Colour Image Segmentation Hierarchies
266
Evaluation of colour spaces in computer vision application of wood defects detection
267
Evaluation of combat simulation from network perspective
268
Evaluation of comb-drive nickel micromirror for fiber optical communication
269
Evaluation of combination methods
270
Evaluation of combined approaches to distributed software-based fault tolerance
271
Evaluation of combined ground penetrating and Through-the-Wall Surveillance UWB technology
272
Evaluation of Combined Radiation Effects to Transistors
273
Evaluation of Combined Reference Frame Transformation for Interturn Fault Detection in Permanent-Magnet Multiphase Machines
274
Evaluation of combined visible/NIR camera for iris authentication on smartphones
275
Evaluation of Combustion-Control-Load-Control Tie-In Equipment at Niles Station or Okio Edison Company
276
Evaluation of command algorithms for control of upper-extremity neural prostheses
277
Evaluation of command and control system effectiveness based on cloud model
278
Evaluation of command modes of an assistance robot for middle ear surgery
279
Evaluation of command sources for a high tetraplegia neural prosthesis
280
Evaluation of commercial current transformer comparator by using precise standard capacitors and resistors
281
Evaluation of commercial GaN HEMTS for pulsed power applications
282
Evaluation of commercial oleophobic coatings for aerospace applications in harsh environments: Analytical approach to determine the coefficient of friction at nano-level through lateral or friction force microscopy
283
Evaluation of commercial scale transformerless solar inverter technology
284
Evaluation of commercial SOI driver performances while operated in extreme conditions (150°C-200°C)
285
Evaluation Of Commercial Test Sets For Use In EMC Surveys At Quiet Rural Sites
286
Evaluation of commercial wireless mesh technologies in a public safety context: Methodology, analysis and experience
287
Evaluation of commercial-grade back-lighted thyratrons
288
Evaluation of commercially available SiC devices and packaging materials for operation up to 350°C
289
Evaluation of commercially available SiC MESFETs for phased array radar applications
290
Evaluation of commercially available, thick, photosensitive films as a stress compensation layer for wafer level packaging
291
Evaluation of Common Mode Disturbance Mitigation Devices in AC Motor Drives through HF Modelling
292
Evaluation of common models used in the estimation of the historical volatility applied to trade-by-trade stock returns data from the U.S. and Mexico
293
Evaluation of commonsense knowledge for intuitive robotic service
294
Evaluation of communication and computation efficient algorithms for distributed skyline queries
295
Evaluation of Communication Architectures for Switched Real-Time Ethernet
296
Evaluation of communication components for monitoring small hydroelectric plants
297
Evaluation of Communication Distance of Broadcast Messages in a Vehicular Ad-Hoc Network Using IEEE 802.11p
298
Evaluation of Communication in Multiagent Systems for Supply Chain Planning and Control
299
Evaluation of communication patterns during NPD within European and Chinese context
300
Evaluation of communication system selection applying AHP algorithm in heterogeneous wireless networks
301
Evaluation of communication technologies for IEC 61850 based distribution automation system with distributed energy resources
302
Evaluation of communications in power distribution monitoring
303
Evaluation of Community-Based Electric Power Market with Agent-Based Simulation
304
Evaluation of Community-Based Electric Power Market with Multi-agent Simulation
305
Evaluation of compact antenna arrays for mobile communications applications
306
Evaluation of compact CARSA sensor and penetration depth of EM signal for non-invasive blood glucose measurement
307
Evaluation of compact composite descriptor based reverse image search
308
Evaluation of compact high-throughput reconfigurable architecture based on bit-serial computation
309
Evaluation of compact polarimetry and along track interferometry as experimental mode of PALSAR-2
310
Evaluation of compact range using a diagonal flat plate
311
Evaluation of comparative thrombogenicity of cellulose-acetate hemodialyzer in in vitro and in vivo system with radiolabeled platelets
312
Evaluation of comparing algorithms used in chopped impulse transformer measurements
313
Evaluation of comparison levels in iterative estimators
314
Evaluation of compartmental and spectral analysis models of [/sup 18/F]FDG kinetics for heart and brain studies with PET
315
Evaluation of compatibility of SnO
2
: CuO thin film based H
2
S sensor on LTCC substrates
316
Evaluation of competing software reliability predictions
317
Evaluation of competing triple junction concentrator cells by electroluminescence
318
Evaluation of competitive capacity about regional mineral resources based on dynamic coordinated development
319
Evaluation of Competitiveness of Power Plants Based on Optimized SVM Using GA and AIS
320
Evaluation of compiler and runtime library approaches for supporting parallel regular applications
321
Evaluation of compiler-assisted software DSM schemes for a workstation cluster
322
Evaluation of complex harmonic signals from magnetic nanoparticles for magnetic particle imaging
323
Evaluation of Complex Harmonic Signals From Magnetic Nanoparticles for Magnetic Particle Imaging
324
Evaluation of complex measurement uncertainty in polar coordinate for equivalent source reflection coefficient
325
Evaluation of Complex Network Model Based on Cloud Model
326
Evaluation of complex optical constants of semiconductor wafers using terahertz ellipsometry
327
Evaluation of complex permittivity of materials partially filled in coaxial line by using hybrid numerical method
328
Evaluation of complex permittivity of materials with deformed cross-section in coaxial line
329
Evaluation of complex residual error in vector network analyzer measurement system in the range of millimeter-wave and submillimeter-wave frequencies
330
Evaluation of complexity and delay of arithmetic circuits as CMOS realizations
331
Evaluation of complexity of wire harness models in a HIRF environment
332
Evaluation of complicated fringe patterns by the nonlinear data-dependent fringe processing method
333
Evaluation of component technologies with respect to industrial requirements
334
Evaluation of component-aware dynamic voltage scaling for mobile devices and wireless sensor networks
335
Evaluation of component-based reconfigurable machine controllers
336
Evaluation of composite laser crystals by output distribution on the crystal facets
337
Evaluation of composite reliability indices based on non-sequential Monte Carlo simulation and particle swarm optimization
338
Evaluation of compositing algorithms for AVHRR data over land
339
Evaluation of Compound System Calls in the Linux Kernel
340
Evaluation of Compound System Calls in the Linux Kernel on Physical and Virtual Machines
341
Evaluation of compressed sensing in seismocardiogram (SCG) systems
342
Evaluation of compressed synthetic aperture radar imagery
343
Evaluation of compression algorithms for automotive stereo matching
344
Evaluation of compression algorithms for motion command generation
345
Evaluation of compression behaviors of oil-immersed insulating pressed-boards for transformers
346
Evaluation of Compression of Remote Network Monitoring Data Streams
347
Evaluation of compression schemes for wide area video
348
Evaluation of compressive sensing encoding on AR drone
349
Evaluation of computational classification methods for discriminating human heart failure etiology based on gene expression data
350
Evaluation of computational complexity of finite element analysis
351
Evaluation of computed tomography to ultrasound 2D image registration for atrial fibrillation treatment
352
Evaluation Of Computer Access Technology - Conceptual Extension Of The Tufts-mit Prescription Guide
353
Evaluation of computer architecture using ISPS
354
Evaluation of computer capacity for P5 intel processors
355
Evaluation of computer modules to teach metacognition and motivation strategies
356
Evaluation of computer network Quality of Service using neural networks
357
Evaluation of Computer-Assisted Quantification of Carotid Stenosis
358
Evaluation of Computer-Based Mine Monitoring and Control at Barnes and Tucker Mine 20
359
Evaluation of computerised hypnomidate infusion system for anesthesia of pacemaker implantation
360
Evaluation of computing in memory architectures for digital image processing applications
361
Evaluation of Concept Space Rating Algorithm and Navigation Scheme
362
Evaluation of Concrete Made from Recycled Coarse Aggregates by Poulsed Power Discharge Treatments
363
Evaluation of concrete made from recycled coarse aggregates by pulsed power discharge
364
Evaluation of concrete water content and other durability indicators by electromagnetic measurements
365
Evaluation of concrete work strain in buildings construction
366
Evaluation of Concrete-Encased Electrodes
367
Evaluation of concurrent error detection techniques on the advanced encryption standard
368
Evaluation of concurrent error detection techniques on the Advanced Encryption Standard
369
Evaluation of Concurrent Multipath Transfer over Dissimilar Paths
370
Evaluation of concurrent pools
371
Evaluation of condition of urban non revenue water based on BP neural network
372
Evaluation of Conditional Failure Density from Hazard Rate
373
Evaluation of conductance and impedance testing on VRLA batteries for the Stenter Operating Companies
374
Evaluation of Conducted EMI Emissions on ZVZCS PWM dc-dc Converters with a Fixed Switching Frequency
375
Evaluation of conducted EMI measurement without LISN using two-port ABCD network approach for EMI filter design under real operating condition
376
Evaluation of Conducted Noise of Resonant Switched Capacitor Converter
377
Evaluation of Conduction Cooling Effect of Cryocooler-Cooled HTS Coils for SMES Application
378
Evaluation of conductive adhesives for industrial SMT assemblies
379
Evaluation of conductivity for the under side section of various types of copper-clad dielectric substrates using a whispering gallery mode resonator
380
Evaluation of Conductivity of Sandwich-type Dielectric Substrates in Millimeter Wave Region and Comparison with Copper-clad Dielectric Substrates
381
Evaluation of conductor stresses in a pulsed high-current toroidal transformer
382
Evaluation of configuration plans for DGs in developing countries using advanced planning techniques
383
Evaluation of Configuration Plans for DGs in Developing Countries using Tradeoff Analysis and MADM
384
Evaluation of Congenital Heart Defects from Dynamic Tracer Measurements
385
Evaluation of Congestion Control Methods for Joint Multiple Resource Allocation
386
Evaluation of congestion control of the PDC mobile packet data communication system
387
Evaluation of congestion detection mechanisms for InfiniBand switches
388
Evaluation of congestion pricing for management highway in Seattle
389
Evaluation of congestion-based certificate omission in VANETs
390
Evaluation of connected component labeling algorithms on shared and distributed memory multiprocessors
391
Evaluation of connectivity measures and anatomical features for statistical brain networks
392
Evaluation of ConnectX Virtual Protocol Interconnect for Data Centers
393
Evaluation of Conoscopic Holography for Estimating Tumor Resection Cavities in Model-Based Image-Guided Neurosurgery
394
Evaluation of constant voltage testing for electromigration study
395
Evaluation of constituent matrices of a companion matrix with repeated eigenvalues
396
Evaluation of constrained and unconstrained SESSMPC applied in five-phase PMSM
397
Evaluation of constrained application protocol for wireless sensor networks
398
Evaluation of constrained multivariable EPSAC Predictive Control Methodologies
399
Evaluation of constrained SESSMPC to drive a three-phase PMSM applied in washing machines
400
Evaluation of constructable match cost measures for stereo correspondence using cluster ranking
401
Evaluation of Contact Failure by Vaporized Organic Gases
402
Evaluation of contact resistance for isotropic electrically conductive adhesives
403
Evaluation of contact resistance of silver-loaded epoxy with aluminized backplane of silicon microstrip sensors
404
Evaluation of contact service life of electrical connections
405
Evaluation of contact stability between objects
406
Evaluation of contact surface configuration with a scanning laser microscope
407
Evaluation of Contact Surface Damages with an Optical Cross-Section Method
408
Evaluation of contamination resistance of GFR epoxy rods for indoor application by means of a salt fog test
409
Evaluation of content-access QoS for various dissemination strategies in peer to peer networks
410
Evaluation of contention free bursting in IEEE 802.11e wireless LANs
411
Evaluation of context management architectures: The case of context framework and context broker
412
Evaluation of context models to code wavelet-transformed hyperspectral images
413
Evaluation of continuity effectiveness for networked space based information system
414
Evaluation of Continuous Exposure to Magnetic Field From AC Overhead Transmission Lines Via Historical Load Databases: Common Procedures and Innovative Heuristic Formulas
415
Evaluation of Continuous Innovative Capability - An Empirical Study from Technology Parks in China
416
Evaluation of continuum regime theories for bipolar charging of particles in the 0.3-13 μm diameter size range
417
Evaluation of contraction of packable dental composites using photoelasticity
418
Evaluation of Contractors´ Safety Performance Based on DEA
419
Evaluation of contractual arrangement of new energy sources for generation expansion in Uruguay and its impact on the risk matrix of the utility costs
420
Evaluation of Contrast Enhancement by Carbon Nanotubes for Microwave-Induced Thermoacoustic Tomography
421
Evaluation of contrast limited adaptive histogram equalization (CLAHE) enhancement on a FPGA
422
Evaluation of contrast sensitivity functions for the formulation of quality measures incorporated in halftoning algorithms
423
Evaluation of control algorithms for shunt active filters under unbalanced and nonsinusoidal conditions
424
Evaluation of control and modulation methods for modular multilevel converters
425
Evaluation of Control Channel Performance with Adaptive Radio Unit Activation in LTE
426
Evaluation of control factors affecting the operator´s immersion and performance in robotic teleoperation
427
Evaluation of control flow traces in software applications for intrusion detection
428
Evaluation of control in a convoy scenario
429
Evaluation of control loop statements power efficiency: An experimental study
430
Evaluation of control maintaining electric power quality by use of rechargeable battery system
431
Evaluation of control methods for isolated three-phase AC-DC converter using modular multilevel converter topology
432
Evaluation of control methods for permanent magnet synchronous motors
433
Evaluation of control modes for head motion-based control with motion sensors
434
Evaluation of control performance: methods and applications
435
Evaluation of control room human factors: a case study in the railway industry
436
Evaluation of Control Schemes for Thyristor-Controlled DC Motors
437
Evaluation of control solution for grid inverter of low power wind turbine for implementation with inexpensive hardware
438
Evaluation of control strategies for fixed-bed coal gasifiers using MGAS
439
Evaluation of control strategies for LCL grid-tied distributed generation systems
440
Evaluation of control strategies for load balancing of a tensioning device with individually driven S-rolls
441
Evaluation of control strategies for managing supply chain risks using Bayesian Belief Networks
442
Evaluation of control strategies for parallel active filter under different supply voltage conditions
443
Evaluation of control strategies for spacecraft electrostatic formation keeping
444
Evaluation of control strategies in HVAC split systems
445
Evaluation of control system performance using Multiple Criteria Decision Making techniques
446
Evaluation of control system reliability using combined dynamic fault trees and Markov models
447
Evaluation of control times for continuous dynamical polysystems with control switchings at discrete times
448
Evaluation of controlled islanding strategy based on power-frequency sensitivity
449
Evaluation of controller tools for conducting MLS curved approaches to New York´s JFK Airport
450
Evaluation of Convair-580 and Simulated Radarsat-2 Polarimetric SAR for Forest Change Detection
451
Evaluation of converged networks for 5G infrastructures
452
Evaluation of convergence rate in the auxiliary problem principle for distributed optimal power flow
453
Evaluation of convergence rate in the central limit theorem for the Kalman filter
454
Evaluation of convergence speed of a modified Nesterov gradient method for CT reconstruction
455
Evaluation of Conversational Voice Communication Quality of the Skype, Google-Talk, Windows Live, and Yahoo Messenger Voip Systems
456
Evaluation of converter topologies and controllers for power quality compensators under unbalanced conditions
457
Evaluation of converter topologies for improved power quality in DC traction substations
458
Evaluation of Convertibility Issues between IFPUG and COSMIC Function Points
459
Evaluation of convolutional codes by error types simulation
460
Evaluation of convolutional neural networks for visual recognition
461
Evaluation of convolutional-code-based FEC under limited recovery time and its application to real-time transmission
462
Evaluation of cooling performance of a piezoelectric micro blower in narrow flow passage
463
Evaluation of Cooling Solutions for Outdoor Electronics
464
Evaluation of cooling solutions for outdoor electronics
465
Evaluation of cooperative demand control system on micro grid
466
Evaluation of cooperative exploration strategies using full system simulation
467
Evaluation of cooperative innovation performance based on grey model
468
Evaluation of cooperative roadside and vehicle-based data collection for assessing intersection conflicts
469
Evaluation of Cooperative Spectrum Sensing Based on Large Scale Measurements
470
Evaluation of Cooperative Techniques for Hybrid/Integrated Satellite Systems
471
Evaluation of cooperative techniques in an interworking UWB-UMTS platform
472
Evaluation of Coordinated Grid Scheduling Strategies
473
Evaluation of coordination between grasp and load forces in power grasp in humans with a haptic interface
474
Evaluation of coordination strategies for heterogeneous sensor networks aiming at surveillance applications
475
Evaluation of copper nanoparticles for low temperature bonded interconnections
476
Evaluation of copper thick film for high frequency digital interconnection
477
Evaluation of copyright marking systems
478
Evaluation of CORBA and Web Services in distributed applications
479
Evaluation of core characteristics of magnetic phase shifters for thyristor amplifiers
480
Evaluation of Core Competence of Chinese Medicine Enterprises Based on Cloud Model
481
Evaluation of core loss calculation methods for highly nonsinusoidal inputs
482
Evaluation of Core Performance when the Node is Power Capped Using Intel® Data Center Manager
483
Evaluation of Corn Nitrogen Nutrition Using Hyperspectral Remote Sensing
484
Evaluation of Corn/Soybeans Separability Using Thematic Mapper And Thematic Mapper Simulator Data
485
Evaluation of corneal nerves morphology for diabetic peripheral neuropathy assessment
486
Evaluation of Corneal Refraction in a Model of a Gaze Tracking System
487
Evaluation of corner detection algorithms
488
Evaluation of Corner Detectors for Structure from Motion Problems
489
Evaluation of corner extraction schemes using invariance methods
490
Evaluation of Corona and Line Models in Electromagnetic Transients Simulations
491
Evaluation of corona and line models in electromagnetic transients simulations
492
Evaluation of corona-resistant magnet wires through partial discharge and space charge measurements
493
Evaluation of Corporate Environmental Reports Using Data Mining Approach
494
Evaluation of corporation information systems based on knowledge management
495
Evaluation of corrective reconstruction methods using a 3D cardiac-torso phantom and bull´s-eye plots
496
Evaluation of correlation functions and design of minimum mean squared error equaliser for a high-density magnetic recording channel with partial erasure effect
497
Evaluation of correlation parameters for periodic sequences (Corresp.)
498
Evaluation of Correlation Power Analysis Resistance and Its Application on Asymmetric Mask Protected Data Encryption Standard Hardware
499
Evaluation of correlation properties of Orthogonal spreading codes for CDMA wireless mobile communication
500
Evaluation of correlative coding and DP-16QAM N-channel 112Gbit/s coherent transmission: Digital non-linear compensation perspective
501
Evaluation of correspondence errors for stereo
502
Evaluation of corrosion films on Cu and Ag reactive monitors deployed in data center server environments
503
Evaluation of Cortical Imaging Techniques Based on Somatosensory Evoked Potentials
504
Evaluation of cortical visual prostheses microelectrode array function. Description of behavioral feline model
505
Evaluation of cosine radial basis function neural networks in detection of artifacts in neonatal EEG
506
Evaluation of cosine radial basis function neural networks on electric power load forecasting
507
Evaluation of co-site interference between PCS1900 and UMTS in a typical outdoor environment
508
Evaluation of COSMO/SkyMed SAR data for urban area characterization
509
Evaluation of cost benefit analysis for the reconfigured distribution system
510
Evaluation of cost effective transputer architectures for the implementation of the computed torque method for robotic manipulators
511
Evaluation of cost effectiveness of renewable energy system considering carbon trading under clean development mechanism
512
Evaluation of cost function for the oct tree segmentation of video cube
513
Evaluation of cost functionals for systems with commensurate delays by a finite polynomial method
514
Evaluation of Cost Functions for Stereo Matching
515
Evaluation of COTS silicon carbide photodiodes for a radiation-hard, low-energy x-ray spectrometer
516
Evaluation of cough using digital particle image velocimetry
517
Evaluation of Counter Electrodes Composed by Carbon Nanofibers and Nanoparticles in Dye-Sensitized Solar Cells
518
Evaluation of Counter-Based Dynamic Load Balancing Schemes for Massive Contingency Analysis on over 10,000 Cores
519
Evaluation of countermeasure implementations based on Boolean masking to thwart side-channel attacks
520
Evaluation of countermeasures against electromagnetic analysis
521
Evaluation of coupled inductor Voltage Regulators
522
Evaluation of coupling among large Vivaldi antenna arrays with fast full-wave techniques
523
Evaluation of course model for implementation of virtual classroom in higher education practice
524
Evaluation of coverage area for a wide line-of-sight indoor optical free-space communication system employing coherent detection [optical wireless communications]
525
Evaluation of CPDLC and voice communication during approach phase
526
Evaluation of CPDLC and voice communication during approach phase
527
Evaluation of crack caustics by neural networks
528
Evaluation of crack depth using eddy current techniques with GMR-based probes
529
Evaluation of Cramer-Rao Bounds for Phase Estimation of Coded Linearly Modulated Signals
530
Evaluation Of Creep In Nickel And Nickel Alloys From Magnetic Measurements
531
Evaluation of Creep in RF MEMS Devices
532
Evaluation of crimped terminations and splices in in-wall electric heaters
533
Evaluation of Crimping as a Termination Technique for Carbon Nanotube Macro-Structures
534
Evaluation of CrIMSS operational products using in-situ measurements, model analysis fields, and retrieval products from heritage algorithms
535
Evaluation of criteria for information retrieval
536
Evaluation of criterion functions for the fusion of multi-focus noisy images
537
Evaluation of critical current density of Nb/Al/AlO/sub x//Nb Josephson junctions using test structures at 300 K
538
Evaluation of Critical Surface Cleanliness by Secondary Ion Mass Spectroscopy
539
Evaluation of Criticality Analysis Measurements in Resource-Constrained Projects
540
Evaluation of cross layer QoS aproachs for improving voice quality over multi-rate WLANs
541
Evaluation of cross-beam vector Doppler ultrasound systems for accurate 3-D velocity measurements
542
Evaluation of cross-correlation values of p-ary m-sequence and its decimated sequence by p
n
+1 over p+1 + p
n
−1 over 2
543
Evaluation of cross-coupling inside gap-waveguides
544
Evaluation of Cross-Layer Reliability Mechanisms for Satellite Digital Multimedia Broadcast
545
Evaluation of cross-modality electromagnetic interactions in a shielded PET/MRI system
546
Evaluation of Crosstalk in High-Frequency Interconnects with an Enhanced Transmission Line Model
547
Evaluation of crosstalk in optical cross-bar switch driven by high-frequency signal
548
Evaluation of Crosstalk Metrics for 3D Display Technologies with Respect to Temporal Luminance Analysis
549
Evaluation of crosstalk penalty in multichannel ASK heterodyne optical communication systems
550
Evaluation of cross-validation formulas for choosing the regularization parameter for inversion of Fredholm integral of the first kind with non-negativity constraints
551
Evaluation of cross-validation protocols for the classification of endoscopic images of colonic polyps
552
Evaluation of Crowd Models in Low Density Scenarios Using Real-World Crowd Data
553
Evaluation of CRTP performance over cellular radio links
554
Evaluation of cryogenic power conditioning subsystems for electric propulsion spacecraft
555
Evaluation of cryopreserved microtubules immobilized in microfluidic channels for a bead-assay-based transportation system
556
Evaluation of Crystal Measurement Systems
557
Evaluation of CSAM for Plastic-Encapsulated Microcircuit Dormant Storage Testing
558
Evaluation of CSD-PZT thick films with different film density
559
Evaluation of CsI(Tl)-PIN diode array tiling schemes
560
Evaluation of CT accuracy in orthopaedic implants geometry reconstruction
561
Evaluation of CT Field of View Restoration for PET-CT Attenuation Correction
562
Evaluation of CT images in the very low x-ray exposure with a photon counting detector with a CdTe semiconductor
563
Evaluation of Cu capping alternatives for polyimide-Cu MCM-D
564
Evaluation of Cu Contamination at Backside Surface of Thinned Wafer in 3-D Integration by Transient-Capacitance Measurement
565
Evaluation of Cu Diffusion From Cu Through-Silicon Via (TSV) in Three-Dimensional LSI by Transient Capacitance Measurement
566
Evaluation of Cu/Ni/SnAg microbump bonding processes for thin-chip-on-chip package using a wafer-level underfill film
567
Evaluation of Cu:SC ratio measurements by chemical etching, electrical resistivity, and image analysis
568
Evaluation of CUDA memory fence performance; Berlekamp-Massey case study
569
Evaluation of Cultured Quartz for High Precision Resonators
570
Evaluation of cumulative charge data of polymer insulator aging tests
571
Evaluation of cumulative probability distribution functions: Improved numerical methods
572
Evaluation of current and vibration signals for squirrel cage induction motor condition monitoring
573
Evaluation of current and wave measurements from a coastal Buoy
574
Evaluation of current control methods for wind turbines using doubly-fed induction machines
575
Evaluation of current controller performance and stability for voltage source converters connected to a weak grid
576
Evaluation of Current Controllers for Distributed Power Generation Systems
577
Evaluation of current density distribution in MESFET gates
578
Evaluation of Current Density in DC Motor Brushes for Mining Machines Based on Air Gap Field Measurement
579
Evaluation of Current Density in DC Motor Brushes for Mining Machines Based on Air-Gap Field Measurement
580
Evaluation of current distribution on wires with a simple model based on PEEC method
581
Evaluation of current harmonic distortion in wind farm application based on Synchronous Active Front End converters
582
Evaluation of current interharmonics from AC drives
583
Evaluation of current interruption performance with axial magnetic field at current peak and current zero of vacuum circuit breakers
584
Evaluation of current levels in the presence of harmonics for proper coordination using transmittances
585
Evaluation of current limiting methods for grid forming inverters in medium voltage microgrids
586
Evaluation of current QoS Mechanisms in Networks on Chip
587
Evaluation of current reference generation methods for a three-phase inverter interfacing renewable energy sources to generalized micro-grid
588
Evaluation of current ripple amplitude in five-phase PWM voltage source inverters
589
Evaluation of current ripple amplitude in three-phase PWM voltage source inverters
590
Evaluation of current standards and practices for the simulation of wind-blown sands and their applicability as accelerated ageing tests for PV modules
591
Evaluation of current stresses in nine-switch energy conversion systems
592
Evaluation of current transformer performance in the presence of remnant flux and harmonics
593
Evaluation of currents and charge in surge protective devices in low voltage distribution networks due to direct lightning strikes
594
Evaluation of currents and charge in surge protective devices in low-voltage distribution networks due to direct lightning strikes
595
Evaluation of Currents and Charges in Low-Voltage Surge Arresters Due to Lightning Strikes
596
Evaluation of currents and charges in low-voltage surge arresters due to lightning strikes
597
Evaluation of currents and charges in low-voltage surge arresters due to lightning strikes
598
Evaluation of currents in the fA range
599
Evaluation of currents´ distribution and two-port parameters of an arbitrarily shaped notch in microstrip line through a simple and novel technique
600
Evaluation of current-sensitive color CRT screens
601
Evaluation of curve length measurements
602
Evaluation of customer interruption cost for reliability planning of power systems in developing economies
603
Evaluation of customer satisfaction in automobile after-sales service based on grey incidence analysis
604
Evaluation of customer satisfaction using the Quality Function Deployment
605
Evaluation of Customer-Oriented Service Quality on Self-Adaptive RBFNN and UDM
606
Evaluation of custom-made implants using industrial computed tomography
607
Evaluation of Custom-Made Insoles on Pes Cavus During Walking
608
Evaluation of cut-off frequencies of higher order modes in eccentric coaxial line
609
Evaluation of CVD diamond for heavy duty microwave switches
610
Evaluation of CVD/PVD multilayered seed for electrochemical deposition of Cu-damascene interconnects
611
Evaluation of Cyanoethyl Pullulan material as the dielectric layer for EWOD devices
612
Evaluation of cylindrical SPECT camera
613
Evaluation of Cylindricity Error Based on an Improved GA with Uniform Initial Population
614
Evaluation of cylindricity error based on geometrical approximation technique
615
Evaluation of Cylindricity Error Based on the Improved Particle Swarm Optimization
616
Evaluation of Cytotoxic and Genotoxic Effects in Human Peripheral Blood Leukocytes Following Exposure to 1950-MHz Modulated Signal
617
Evaluation of D.C. Motor Variable Torque Components From Measurement of Stator Angular Vibrations
618
Evaluation of daily jump compensation methods for GPS carrier phase data
619
Evaluation of damage in DNA molecules resulting from very-low-frequency magnetic fields by using bacterial mutation repairing genetic system
620
Evaluation of damages using electron spin resonance (ESR) in oxide semiconductors induced by plasma
621
Evaluation of Dammann grating using polarization interferometer
622
Evaluation of damping controls of a unified power flow controller
623
Evaluation of damping of windings in a generator using oscillation energy dissipation
624
Evaluation of data acquisition geometries and strategies for myocardial SPECT imaging
625
Evaluation of data acquisition scheme in a new myocardial SPECT system
626
Evaluation of data assimilation on numerical weather prediction for Egypt
627
Evaluation of data communication requirements for common demand response models
628
Evaluation of data compression for energy-aware communication in mobile networks
629
Evaluation of data delivery on Android application for health screening form
630
Evaluation of Data Distribution Patterns in Distributed-Memory Machines
631
Evaluation of data distribution techniques in a CORBA-based telerobotic system
632
Evaluation of data management and transfer tools for the biomedical community
633
Evaluation of data passing and scheduling avoidance
634
Evaluation of data quality of multisite electronic health record data for secondary analysis
635
Evaluation of data reconstruction using Walsh functions
636
Evaluation of Datacasting in the Mobile Environment
637
Evaluation of data-center architectures for virtualized Network Functions
638
Evaluation of DC and AC performance of junctionless MOSFETs in the presence of variability
639
Evaluation of dc insulation performance based on space-charge measurements and accelerated life tests
640
Evaluation of DC voltage control strategies for multi-terminal HVDC grids comprising island systems with high RES penetration
641
Evaluation of DC-DC converter using power board of multi layers by analysis and experiment
642
Evaluation of DC-link decoupling using electrolytic or polypropylene film capacitors in three-phase grid-connected photovoltaic inverters
643
Evaluation of DC-to-DC converters topologies with quadratic conversion ratios for photovoltaic power systems
644
Evaluation of dead beat current controllers for grid connected converters
645
Evaluation of deadlock control designs in automated manufacturing systems
646
Evaluation of decentralized reactive swing-leg control on a powered robotic leg
647
Evaluation of deceptive mails using filtering & WEKA
648
Evaluation of Decision Feedback Equalization and Viterbi Algorithm Detection for Voiceband Data Transmission--Part I
649
Evaluation of Decision Feedback Equalization and Viterbi Algorithm Detection for Voiceband Data Transmission--Part II
650
Evaluation of decision feedback equalization in VDSL environment
651
Evaluation of decision support systems for emergency management
652
Evaluation of Decision Tree SVM Framework Using Different Statistical Measures
653
Evaluation of decision trees for cloud detection from AVHRR data
654
Evaluation of decoding trade-offs of concatenated RS convolutional codes and turbo codes via trellis
655
Evaluation of DECT for low latency real-time industrial control networks
656
Evaluation of DECT for low latency real-time industrial control networks
657
Evaluation of DECT receiver performance
658
Evaluation of DECT-ULE for robust communication in dense wireless sensor networks
659
Evaluation of Dedicated Path Protection Schemes in All-Optical Network under
660
Evaluation of de-embedding technique accuracy depending on de-embedding patterns for CMOS circuits up to 110 GHz
661
Evaluation of deep convolutional nets for document image classification and retrieval
662
Evaluation of deep sea tide gauge sensors
663
Evaluation of deep space Ka-band data transfer using radiometeorological forecast models
664
Evaluation of defect detection schemes for CMP process monitoring using rigorous 3-D EM simulations
665
Evaluation of defect levels formed in the nano-porous titanium oxide layer of dye-sensitized solar cell
666
Evaluation of defect root radius by ultrasound
667
Evaluation of defect-related diffusion in semiconductors by electrooptical sampling
668
Evaluation of defects in seal region of food packages using the backscattered amplitude integral (BAI) technique
669
Evaluation of defects reduction and pattern abnormal on semiconductor Copper Dual Damascene process
670
Evaluation of defect-tolerance scheme in a 600 M-bit wafer-scale memory
671
Evaluation of Deficit Round Robin Queue Discipline for Real-time Traffic Management in an RTP/RTCP Environment
672
Evaluation of deflection routing on various NoC topologies
673
Evaluation of Deformation Behavior of HSLA-100 Steel Using Magnetic Hysteresis Technique
674
Evaluation of deformation behaviours of HSLA-100 steel using magnetic measurement techniques
675
Evaluation of degradation in amorphous silicon solar cells
676
Evaluation of degradation in polyimide by recovery voltage measurement
677
Evaluation of degradation of shaped radiation pattern caused by excitation coefficient error for onboard array-fed reflector antenna
678
Evaluation of degraded images using adaptive Jensen-Shannon divergence
679
Evaluation of delaminated area of polymer/Carbon Nanotubes fiber reinforced composites after flexural tests by ESPI
680
Evaluation of delaminated high-voltage rotating machine stator winding groundwall insulation
681
Evaluation of delay fault testability of LUT functions for improved efficiency of FPGA testing
682
Evaluation of delay performance of traffic shapers
683
Evaluation of delay variation in asynchronous circuits based on the scalable-delay-insensitive model
684
Evaluation of Delayed Input Effects to PSS Interarea Damping Control Design
685
Evaluation of delayed product differentiation structures for coordinating product, process and supply chain design
686
Evaluation of delays encountered in control of UAV
687
Evaluation of Delays Induced by Foundation Fieldbus H1 Networks
688
Evaluation of Delays Induced by Profibus PA Networks
689
Evaluation of delay-time degradation of low-voltage BiCMOS based on a novel analytical delay-time modeling
690
Evaluation of delegation plan effectiveness: Case study in branches of a bank
691
Evaluation of demand-side management
692
Evaluation of denoising algorithms applied to the reduction of speckle in digital holography
693
Evaluation of density one-class classifiers for item-based filtering
694
Evaluation of density-dependent lifetime of 1s paraexcitons in Cu
2
O by cw laser based excitonic Lyman spectroscopy
695
Evaluation of dental implants using Computed Tomography
696
Evaluation of Dependability of Multi-tier Internet Business Applications with Queueing Networks
697
Evaluation of dependency parsers for long Arabic sentences
698
Evaluation of deployment alternatives for school wireless networks
699
Evaluation of Depolarization Effects on the Performance of High Altitude Platforms (HAPs)
700
Evaluation of depolarization effects on the performance of satellite communications
701
Evaluation of depth compression and view synthesis distortions in multiview-video-plus-depth coding systems
702
Evaluation of Depth of Field for depth perception in DVR
703
Evaluation of depth of interaction measurements using discrete crystal arrays and digital silicon photomultipliers
704
Evaluation of depth perception of monocular video see-through head mounted display
705
Evaluation of Depth Sensors for Robotic Applications
706
Evaluation of DER adoption in the presence of new load growth and energy storage technologies
707
Evaluation of Derivative Free Kalman Filter and Fusion in Non-Linear Estimation
708
Evaluation of DES, 3 DES and AES on Windows and Unix platforms
709
Evaluation of de-scum methodology for through silicon via (TSV) etch to improve TSV defects performance
710
Evaluation of Desertification Processes in Ouricuri-PE Through Trend Estimates of Times Series
711
Evaluation of Design Alternatives for a Multiprocessor Microprocessor
712
Evaluation of design alternatives for the 2-D-discrete wavelet transform
713
Evaluation of Design Alternatives´ Environmental Performance Using AHP and ER Approaches
714
Evaluation of Design for Reliability Techniques in Embedded Flash Memories
715
Evaluation of Design Methods for Geometric Control
716
Evaluation of design options for the trace cache fetch mechanism
717
Evaluation of design parameters for a cache vector quantization system
718
Evaluation of design space exploration strategies
719
Evaluation of Design Strategies for Time Course Experiments in Genetic Networks: Case Study of the XlnR Regulon in Aspergillus niger
720
Evaluation of design variables in Thompson coil based operating mechanisms for ultra-fast opening in hybrid AC and DC circuit breakers
721
Evaluation of designs for intermittently heated surfaces
722
Evaluation of Desulfuration Projects Decision Based on Attribute Importance Degree of Rough Set and TOPSIS
723
Evaluation of detailed modeling of the LP residual in statistical speech synthesis
724
Evaluation of Detectability and Distinguishability of Aircraft Control Element Failures using Flight Test Data
725
Evaluation of detectability in BIST environment
726
Evaluation of Detecting Method With AC and DC Excitations of Opposite-Side Defect in Steel Using 3-D Nonlinear FEM Taking the Minor Loop Into Account
727
Evaluation of detecting the breaking of wires on medium-voltage system by three-phase sensors
728
Evaluation of Detection Algorithms for MAC Layer Misbehavior: Theory and Experiments
729
Evaluation of detection based on statistics and template matching classification on SAS AUV data
730
Evaluation of Detention Basin Ecosystem Services in Dahuangpuwa
731
Evaluation of deteriorated anti-stiction layer in NIL
732
Evaluation of deterioration in aged GCBs and study on equipment replacement criteria
733
Evaluation of deterministic fault injection for fault-tolerant protocol testing
734
Evaluation of development optimization of LTE base station OSS by product test automation
735
Evaluation of Deviating Alerts coming from Behavioral Intrusion Detection System
736
Evaluation of device parameters of HfO
2
/SiO
2
/Si gate dielectric stack for MOSFETs
737
Evaluation of dexterity measures for a 3-link planar redundant manipulator using constraint locus
738
Evaluation of diabetic foot ulcer development using hyperspectral imaging
739
Evaluation of diagnosability of failure knowledge in manufacturing systems
740
Evaluation of diagnostic measurements used on stator insulation of hydrogenerators
741
Evaluation of diagnostic techniques for non-ceramic outdoor high voltage insulators
742
Evaluation of diagonal impedance elements in TE polarization for two-dimensional field computations
743
Evaluation of dialogue act recognition approaches
744
Evaluation of didactical models with learning curves
745
Evaluation of die coating materials for chip-on-board technology insertion in spaceborne applications
746
Evaluation of die edge cracking in flip-chip PBGA packages
747
Evaluation of die edge cracking in flip-chip PBGA packages
748
Evaluation of Die Strength by Using Finite Element Method With Experiment Validation
749
Evaluation of Die Stress in MEMS Packaging: Experimental and Theoretical Approaches
750
Evaluation of die-attach adhesives by curvature measurements
751
Evaluation of dielectric films for aerospace and space power wiring insulation
752
Evaluation of dielectric fluids by gassing-cell tests
753
Evaluation of dielectric fluids for macro-scale electrostatic actuators and machinery
754
Evaluation of dielectric liquids by measurement of their partial discharge characteristics
755
Evaluation of Dielectric Mixing Models for Passive Microwave Soil Moisture Retrieval Using Data From ComRAD Ground-Based SMAP Simulator
756
Evaluation of dielectric optical waveguides from their far-field radiation patterns
757
Evaluation of dielectric permittivity for homogeneous materials from transmittance requirements
758
Evaluation of dielectric physical optics in electromagnetic scattering
759
Evaluation of dielectric properties in polypropylene/clay nanocomposites
760
Evaluation of Dielectric Properties of Printed Wiring Board Materials by Using a Microstrip-ring and Strip-line Ring Resonator Methods
761
Evaluation of Dielectric Resonator Sensor for Near-Field Breast Tumor Detection
762
Evaluation of Dielectric Strength Gauges for Transformer Oil [includes discussion]
763
Evaluation of Diesel and Fuel Cell Plug-In Hybrid City Buses
764
Evaluation of Diesel-Driven Generators for Starting an Isolated System of Motor-Driven Equipment
765
Evaluation of different AAC codec realizations for arm architectures
766
Evaluation of Different Algorithms of Nonnegative Matrix Factorization in Temporal Psychovisual Modulation
767
Evaluation of different analytical and semi-analytical methods for the design of ELF magnetic field shields
768
Evaluation of different analytical methods for the design of ELF magnetic field shields
769
Evaluation of different approaches for road course estimation using imaging radar
770
Evaluation of different approaches of mathematical modelling of thermal phenomena applied to induction motors
771
Evaluation of different audio features for musical genre classification
772
Evaluation of different berthing scenarios in Shahid Rajaee container terminal using discrete-event simulation
773
Evaluation of different broken bar fault diagnostic means in double-cage induction motors with FEM
774
Evaluation of different burn control methods for the International Thermonuclear Experimental Reactor
775
Evaluation of different calibration approaches for S-NPP CRIS full spectral resolution SDR processing
776
Evaluation of different carrier-based PWM methods for modular multilevel converters for HVDC application
777
Evaluation of different colling fluids for high-voltage Neutral Beam Injector grids
778
Evaluation of different contact aid compounds for aluminum-to-copper connections
779
Evaluation of different contact-aid compounds for aluminum-to-copper connections
780
Evaluation of different cortical potential imaging methods using simulated EEG data
781
Evaluation of different cryptographic algorithms on wireless sensor network nodes
782
Evaluation of different database designs for integration of heterogeneous distributed Electronic Health Records
783
Evaluation of different descriptors for identifying similar video shots
784
Evaluation of Different Die Attach Film and Epoxy Pastes for Stacked Die QFN Package
785
Evaluation of different English translations of Holy Koran in scope of verb process type
786
Evaluation of different feature extraction methods for speech recognition in car environment
787
Evaluation of different feature sets for gait recognition using skeletal data from Kinect
788
Evaluation of different fuzzy knowledge acquisition methods for remote sensing image classification
789
Evaluation of different high-voltage switch solutions for high-power converters used in rolling stock
790
Evaluation of different loss calculation methods for high-voltage IGBT-s under small load conditions
791
Evaluation of different marker sets for motion artifact reduction in breast dynamic infrared imaging
792
Evaluation of different measurement methods to determine stray load losses in induction machines
793
Evaluation of different meshing algorithms in the computation of defibrillation thresholds in children
794
Evaluation of different methods for forest regional biomass mapping from UAVSAR data
795
Evaluation of different methods for measuring the impedance of Lithium-ion batteries during ageing
796
Evaluation of different methods of DOA using a circular array applied to indoor environment
797
Evaluation of Different Methods to Retrieve the Hemispherical Downwelling Irradiance in the Thermal Infrared Region for Field Measurements
798
Evaluation of different mitigation techniques for electromagnetic interference caused by common mode voltage in BLDC outer-rotor motor
799
Evaluation of Different MMIC VCO Design Approaches
800
Evaluation of different MRI-based anatomical priors for PET brain imaging
801
Evaluation of different multi-pinhole imaging geometries for SPECT imaging of Parkinsonian disorders
802
Evaluation of Different Onscreen Keyboard Layouts Using EEG Signals
803
Evaluation of Different Operating Strategies in Small Stand-Alone Power Systems
804
Evaluation of different Operating Systems performance in the Private Cloud with ESXi hypervisor using SIGAR framework
805
Evaluation of different platings for aluminum-to-copper connections
806
Evaluation of different platings for aluminum-to-copper connections
807
Evaluation of different positive sequence detection structures applied to grid-connected systems
808
Evaluation of different pre-whitening decorrelation based adaptive feedback cancellers in hearing aids using perceptual criteria
809
Evaluation of different PWM techniques for two level inverter in grid connected WECS
810
Evaluation of different quality functions for road course estimation using imaging radar
811
Evaluation of different radio bearer selection approaches for MBMS in B3G networks
812
Evaluation of different random estimation methods for the MADPET-II small animal PET scanner using GATE
813
Evaluation of different rhythms by hidden Markov models in heart rate variability of hypertrophic cardiomyopathy patients
814
Evaluation of different Rijndael implementations for high end servers
815
Evaluation of different scheduling policies in IaaS applications by Mean Field analysis
816
Evaluation of different spelling layouts for SSVEP based BCIs
817
Evaluation of different sprayers in the tea plants
818
Evaluation of different stages of Alzheimer´s disease using unsupervised clustering techniques and voxel based morphometry
819
Evaluation of different stages of dementia employing neuropsychological and machine learning techniques
820
Evaluation of different statistical shape models for segmentation of the left ventricular endocardium from magnetic resonance images
821
Evaluation of different strategies for series voltage sag compensation
822
Evaluation of Different Strategies to Optimize an HMM-Based Character Recognition System
823
Evaluation of different structures for loop filter on synthesizer specifications
824
Evaluation of different super-resolution techniques for automotive applications
825
Evaluation of different SVM kernels for predicting customer churn
826
Evaluation of different types of avalanche photo diodes from Hamamatsu and Perkin-Elmer
827
Evaluation of different types of human head shape and ear effects for mobile phone exposure on em absorption
828
Evaluation of different vehicle management strategies for the personal rapid transit system
829
Evaluation of different visualizations of Web search results
830
Evaluation of different wafer charging metrology protocols for thin dielectrics
831
Evaluation of different wavelet constructions (designs) for analysis of protein sequences
832
Evaluation of different X-ray tube concepts with the simulation package ROSI
833
Evaluation of different X-ray tube concepts with the simulation package ROSI
834
Evaluation of differential evolution and K-means algorithms on medical diagnosis
835
Evaluation of differential gain of 1.3 μm AlGaInAs/InP strained MQW lasers
836
Evaluation of differential optical flow techniques on synthesized echo images
837
Evaluation of Differential Pressure Setpoint of Chilled Water Pumps in Clean Room HVAC Systems for Energy Savings in High-Tech Industries
838
Evaluation of differential pressure setpoint of chilled water pumps in cleanroom HVAC systems for energy savings in high-tech industries
839
Evaluation of differential VLBI phase delay observable for spacecraft navigation - ΔVLBI observation of Hayabusa at touchdown to ITOKAWA -
840
Evaluation of differential vs. single-ended sensing and asymmetric cells in 90 nm logic technology for on-chip caches
841
Evaluation of differentiated services using an implementation under Linux
842
Evaluation of differentiation for lossless compression of several signal classes
843
Evaluation of differentiation of energy tariffs for households in terms of their stimulatory function
844
Evaluation of difficulties and risks of ship handling in case of entering port
845
Evaluation of DiffServ-aware constraint-based routing schemes for multiprotocol label switching networks
846
Evaluation of diffuse scattering contribution for delay spread and crosspolarization ratio prediction in an indoor scenario
847
Evaluation of diffusion approximation for the G/G/1 queuing model
848
Evaluation of diffusion barrier layers in Cu interconnects
849
Evaluation of diffusion imaging protocols for the Alzheimer´s disease Neuroimaging Initiative
850
Evaluation of diffusion patterning as an alternative substrate technology for automotive applications
851
Evaluation of diffusion patterning as an alternative substrate technology for automotive applications
852
Evaluation of diffusion-driven material property profiles using three-wavelength interdigital sensor
853
Evaluation of DIG (direct immersion gold) as a new surface finishes for mobile applications
854
Evaluation of digital back-propagation performance dependent on stepsize and ADC sampling rate for coherent NRZ-and RZ-DQPSK experimental data
855
Evaluation of digital baseband modulation schemes for molecular communication in nanonetworks
856
Evaluation of digital broadcasting and the mobile communication
857
Evaluation of digital certificates acquisition in large-scale 802.11-3GPP hybrid environments
858
Evaluation of digital chest computed radiology (CR) unit and image distribution system at the Prince Charles Hospital Brisbane, Australia
859
Evaluation of Digital Circuit-Level Variability in Inversion-Mode and Junctionless FinFET Technologies
860
Evaluation of Digital Control Law Design in the W´-Plane
861
Evaluation of digital elevation model generated by an airborne interferometric SAR (Pi-SAR2)
862
Evaluation of digital elevation model using rational polynomial coefficient based on HR Pleiades satellite stereo imagery
863
Evaluation of Digital Elevation Models (DEMs) generated from ASTER and SRTM data: A case study of flat alluvium terrain of Bakreshwar-Dubrajpur (W.B.), India
864
Evaluation of digital filters for rejecting discrete spectral interference in on-site PD measurements
865
Evaluation of digital hearing aid algorithms on wearable signal processor systems
866
Evaluation of Digital Maize Planting and Management System based on simulation model
867
Evaluation of digital predistortion using the USRP N200 software defined radio transceiver
868
Evaluation of digital radiography for 3D reconstruction
869
Evaluation of digital speckle filters for ultrasound images
870
Evaluation of digital ternary stimuli for dynamic test of ΣΔ ADCs
871
Evaluation of Digital Tomographic Filters
872
Evaluation of digital unsharp masking and local contrast stretching as applied to chest radiographs
873
Evaluation of Digital Watermarking System for Vector Map Content Distribution
874
Evaluation of Digitally Coded Acoustic Surface-Wave Matched Filters
875
Evaluation of digitizer properties on pulse shape discrimination in a gelled NE213 cell
876
Evaluation of Dimensional Analysis in Robotics
877
Evaluation of diode-based and NMOS/Lnpn-based ESD protection strategies in a triple gate oxide thickness 0.13 µm CMOS logic technology
878
Evaluation of dip and interruption costs for a distribution system with distributed generations
879
Evaluation of direct 4D parametric reconstruction with low count human PET data
880
Evaluation of Direct and Iterative Methods for Overdetermined Systems of TOA Geolocation Equations
881
Evaluation of Direct Cu Electroplating on Ru: Feature Fill, Parametric, and Reliability
882
Evaluation of direct modulation and external modulation in temporal phase encoding system
883
Evaluation of Direct Plane Fitting for Depth and Parameter Estimation
884
Evaluation of direct position estimation based on α-β axes inductance information for IPMSM sensorless control systems
885
Evaluation of directed self-assembly process for LED assembly on flexible substrates
886
Evaluation of directional mechanical properties of 3D printed polymer parts
887
Evaluation of directional reflectivity characteristics as new modality for 3D Ultrasound Computer Tomography
888
Evaluation of directivity for planar antenna arrays
889
Evaluation of direct-sequence spread-spectrum modulation technique for digital data transmission with ultrasound
890
Evaluation of disaster level caused by power quality problems
891
Evaluation of disaster management portals: Applying knowledge management to digital information
892
Evaluation of discernibility matrix based reduct computation techniques
893
Evaluation of discharge characteristics on the triple junction for development of the Gas-Insulated Switchgear
894
Evaluation of discharge resistance of solid dielectric power cable insulations
895
Evaluation of Discount Effects Using Poisson Regression Based on Interaction Effects between Bargain Scale and Product Category
896
Evaluation of discovery mechanisms for Media Independent Handover services
897
Evaluation of Discrete Wavelet Transform implementation for protective relaying
898
Evaluation of disk-level workloads at different time-scales
899
Evaluation of dismantled historical wooden members using portable ultrasonic system
900
Evaluation of disparity estimation techniques and its application in mapping
901
Evaluation of disparity map characteristics for stereo image coding
902
Evaluation of dispatching rules in a robot handling system
903
Evaluation of Dispatching Strategies for the Optimization of a Real-World Production Plant
904
Evaluation of dispenser cathodes for use in gaseous environments
905
Evaluation of dispersion constants for signed-error blind equalization algorithms
906
Evaluation of dispersion in COM-parameters
907
Evaluation of dispersity routing strategies in anonymous communication
908
Evaluation of dispersive waves in soliton pulses generated from a Mach-Zehnder modulator and a single mode fiber
909
Evaluation of dispersive waves in soliton pulses generated from Mach-Zehnder modulator and singlemode fibre
910
Evaluation of displacement - time characteristics of stirling engine drive mechanisms - II
911
Evaluation Of Displacement-time Characteristics Of Stirling Engine Drive Mechanisms
912
Evaluation of display design based on human´s eye movement
913
Evaluation of disposable arterial blood pressure transducer sets
914
Evaluation of distance education instruction: an evaluation case study
915
Evaluation of distance measures for MPEG-7 melody contours
916
Evaluation of Distance Measures for NMF-based Face Recognition
917
Evaluation of Distance Protection Performance applied on Series Compensated Transmission Lines using Real Time Digital Simulation
918
Evaluation of distance relay performance
919
Evaluation of distance-based location update and sequential paging in PCS registration system
920
Evaluation of distinctive color features from harris corner key points
921
Evaluation of distinctive PD parameters in SF
6
under ac voltage
922
Evaluation of distortion correction of diffusion-weighted MR images of human cervix
923
Evaluation of Distortion Due to the Antennas in Ultra Wideband Impulse Radio
924
Evaluation of distortion in an overmodulated semiconductor laser through a dynamic model including hysteresis
925
Evaluation of distortion in f.m. trunk radio systems by a Monte Carlo method
926
Evaluation of distortion rate functions for low distortions
927
Evaluation of distributed admission control for the IEEE 802.11e EDCA
928
Evaluation of Distributed Collaborative Adaptive Sensing in a Four-Node Radar Network: Integrated Project 1
929
Evaluation of distributed generation connecting to distribution network based on long-run incremental cost
930
Evaluation of distributed generation systems in Thailand´s Metropolitan Electricity Authority areas
931
Evaluation of distributed hierarchical scheduling with explicit grain size control
932
Evaluation of distributed MIMO antennas for mobile terminal
933
Evaluation of Distributed Multi-User MIMO-OFDM With Limited Feedback
934
Evaluation of distributed object systems on heterogeneous computing platforms
935
Evaluation of distributed recovery in large-scale storage systems
936
Evaluation of distributed security systems server modules peak workload
937
Evaluation of Distribution Circuit Reliability
938
Evaluation of distribution circuit voltage with secondary voltage controlled capacitor installations
939
Evaluation of Distribution Communication Network Various Access Means Basing on Preferable DEA
940
Evaluation of distribution fault diagnosis algorithms using ROC curves
941
Evaluation of distribution network reliability index using Loop Restoration Scheme
942
Evaluation of distribution network transformer dissolved gas analysis (DGA) data
943
Evaluation of Distribution Networks Based on the Fuzzy Method
944
Evaluation of distribution reliability with superconducting fault current limiter
945
Evaluation of distribution system enhancements using value-based reliability planning procedures
946
Evaluation of Distribution Systems for Medium-Load-Density Commercial Areas
947
Evaluation of disturbance in the antenna calibration of the microwave radiometer
948
Evaluation of disturbance torques exerting on mobile manipulators traveling on irregular terrain
949
Evaluation of Diurnal Dissolved Oxygen as an Indicator of Biodegradable Organic and Nitrogen Pollution in Constructed Wetlands
950
Evaluation of Diver Communication Systems by a Diver-to-Diver Technique
951
Evaluation of diverse Cell Range Expansion strategies applying CoMP in heterogeneous network
952
Evaluation of diverse compiling for software-fault detection
953
Evaluation of diverse inventory policies using simulation and design of experiment
954
Evaluation of diversity and MIMO performance of a new high port to port isolation dual-band system
955
Evaluation of diversity and MIMO performance of antennas from phaseless radiation patterns
956
Evaluation of Diversity and Power Control Techniques for Satellite Communication Systems in Tropical and Equatorial Rain Climates
957
Evaluation of diversity antenna characteristics in narrow band fading channel using random phase generation process
958
Evaluation of diversity combining methods for underwater acoustic OFDM communication
959
Evaluation of diversity combining systems for mobile reception in Digital Terrestrial Television Broadcasting
960
Evaluation of diversity gain and system capacity increase in a multiple HAP system
961
Evaluation of diversity measures for multiple classifier fusion by majority voting
962
Evaluation of diversity performance in GSM
963
Evaluation of diversity potential in multisatellite constellations
964
Evaluation of diversity schemes in TDMA digital mobile radio
965
Evaluation of Diversity Techniques for the Indoor Diffuse Infrared Channel
966
Evaluation of Diversity Techniques in Complex Indoor Environments
967
Evaluation of Division Based Broadcasting System Considering Additional Information
968
Evaluation of Division Based Broadcasting System Considering Receiving Opportunity
969
Evaluation of DME squitter coherency
970
Evaluation of DME squitter coherency
971
Evaluation of d-mesh Interconnect for SoC
972
Evaluation of DNA mapping schemes for exon detection
973
Evaluation of DNA Oxidative Damage in Visceral Cells Using 8-OHdG Level
974
Evaluation of DOA estimation accuracy using spectrum width
975
Evaluation of Docker as Edge computing platform
976
Evaluation of Docker containers based on hardware utilization
977
Evaluation of domestic electrical demand and its effect on low voltage network
978
Evaluation of doping levels in active layers of MESFETs
979
Evaluation of dosimetry characteristics of a Silicon Photo-Multiplier with a plastic scintillator by Cs-137
980
Evaluation of double layer capacitor technologies for high power and high energy storage applications
981
Evaluation of double layer capacitors for power electronic applications
982
Evaluation of double sided periodic substitution (DSPS) method for recovering missing speech in packet voice communications
983
Evaluation of downhole electric impedance heating systems for paraffin control in oil wells
984
Evaluation of downhole electric impedance heating systems for paraffin control in oil wells
985
Evaluation of downlink IEEE802.16e communication at airports
986
Evaluation of doxorubicin-containing microbubbles for ultrasound-triggered delivery
987
Evaluation of DPA Attack Resistance of Transistor-Based Adiabatic Logic Styles
988
Evaluation of DR and CR digital mammography systems based on phantom and breast dosimetry
989
Evaluation of Drawing Ability Based on Radar Chart
990
Evaluation of drawing on 3D surfaces with haptics
991
Evaluation of driver assistance systems with a car simulator using a virtual and a real FPGA platform
992
Evaluation of driver response to road user charging systems
993
Evaluation of Driver Stress Using Biomarker in Motor-vehicle Driving Simulator
994
Evaluation of driver-behavior models in real-world car-following task
995
Evaluation of driving attentiveness through usage of fuzzy inference
996
Evaluation of driving behavior and the efficacy of a predictive eco-driving assistance system for heavy commercial vehicles in a driving simulator experiment
997
Evaluation of driving forces of land-use change and urban growth in North Rhine-Westphalia (Germany)
998
Evaluation of driving performance of piezoelectric actuator with current pulse
999
Evaluation of driving skills using an HMM-based distance measure
1000
Evaluation of droop-based controls in an islanded microgrid with electronically interfaced distributed energy resources
