<< مقالات لاتين فني مهندسي >>
<< بر اساس عنوان >>
1
Analysis of spectra in reverse overwrite
2
Analysis of spectral amplitude coding OCDMA successive interference cancellation scheme
3
Analysis of spectral and energy efficiency in ultra-dense network
4
Analysis of spectral and wavelet-based measures used to assess cardiac pathology
5
Analysis of Spectral Bendloss Filtering in a Cladding-Pumped W-Type Fiber Raman Amplifier
6
Analysis of spectral changes and filter design in tagged cardiac MRI
7
Analysis of spectral characteristics of DBE-AMI class linear codes
8
Analysis of spectral clustering algorithms for linear and nonlinear time series
9
Analysis of Spectral Correlation Function for amplitude modulation signals
10
Analysis of spectral efficiency and energy efficiency interrelationship in cellular networks with outage constraint
11
Analysis of Spectral Efficiency and Management of Cross-Tier Interference in Femtocell Network
12
Analysis of spectral efficiency for licensed bands WIMAX
13
Analysis of spectral feature extraction using the gamma filter
14
Analysis of spectral features of mechanical heart valve sounds after aortic and mitral valve replacement
15
Analysis of spectral interpolation with weighting dependent on frame energy
16
Analysis of Spectral Measures for Voiced Speech with Varying Noise and Pertubation Levels
17
Analysis of spectral photocurrent response from multi-junction solar cells under variable voltage bias
18
Analysis of spectral reflectance of mucous membrane for endoscopic diagnosis
19
Analysis of spectral regrowth of weakly nonlinear power amplifiers
20
Analysis of spectral regrowth of weakly nonlinear power amplifiers
21
Analysis of Spectral Regrowth on Forward-Link CDMA Signals Based on Fifth-order Nonlinear Distortion
22
Analysis of Spectral Shaping on DFT-OFDM
23
Analysis of spectral signatures of stator currents on a three-phase induction motor operating in non stationary mode for rotational speed and slip detection using rotor slot harmonics
24
Analysis of spectral signatures of urban surfaces for their identification using hyperspectral HyMap data
25
Analysis of Spectral Space Properties of Directed Graphs Using Matrix Perturbation Theory with Application in Graph Partition
26
Analysis of spectral spreading in a phase-modulated system for 1.75-GHz GSM RF transmitter design
27
Analysis of spectral variations hidden in ultrasonic echoes acquired from healthy and sick liver of Wistar rats
28
Analysis of spectrally shaped DFTS-OFDM for fiber nonlinearity mitigation
29
Analysis of spectrogram parameter organization applied to the characterization of atrial fibrillation
30
Analysis of spectrometric data of aeroengines to establish hazard threshold limits for Iron content
31
Analysis of spectroscopic radiation portal monitor data using principal components analysis
32
Analysis of spectroscopy and amplification at 1.3 Analysis of spectroscopy and amplification at 1.3 μm in Nd/Tm/Yb doped tellurite glass fibres
33
Analysis of spectrum adaptation in cognitive radio networks with elastic traffic and buffering
34
Analysis of Spectrum and Prediction for Short-term Traffic Flow
35
Analysis of spectrum channel assignment for IEEE 802.11b wireless LAN
36
Analysis of Spectrum Characteristics of the Acquired Sea Clutter Data Based on HHT
37
Analysis of spectrum efficiency and energy efficiency interrelationship in heterogeneous cellular networks
38
Analysis of Spectrum Efficiency and Energy Efficiency of Heterogeneous Wireless Networks With Intra-/Inter-RAT Offloading
39
Analysis of Spectrum Handoff under Diverse Mobile Traffic Distribution Model in Cognitive Radio
40
Analysis of spectrum maximization of advanced modulation and coding techniques
41
Analysis of spectrum occupation in the 3–50 MHz band in the Korean Peninsula
42
Analysis of Spectrum Sensing Based on Energy Detection Method in Cognitive Radio Networks
43
Analysis of spectrum sensing characteristics for cognitive radio GFDM signal
44
Analysis of spectrum utilization for existing cellular technologies in context to cognitive radio
45
Analysis of spectrum utilization in suburb environment—evaluation of potentials for cognitive radio
46
Analysis of Spectrum Utilization of Cognitive Radio Networks in Nakagami Fading Channels
47
Analysis of spectrum variability in sea clutter
48
Analysis of spectrum variations in different seasons in composite climate zone of India
49
Analysis of speech and language communication for cochlear implant users in noisy lombard conditions
50
Analysis of speech characteristics of neurological diseases and their classification
51
Analysis of speech data rate in voice over IP conversation
52
Analysis of Speech Features for Emotion Detection: A Review
53
Analysis of speech imagery using brain connectivity estimators
54
Analysis of speech production in a noisy environment
55
Analysis of speech segments using variable spectral/temporal resolution
56
Analysis of speech separation for ASR systems
57
Analysis of Speech Signal Using Morphological Approach
58
Analysis of speech signals among obstructive sleep apnea patients
59
Analysis of speech signals of short pitch period by a sample-selective linear prediction
60
Analysis of speech signals of short pitch period by the sample-selective linear prediction
61
Analysis of speech transcripts to predict winners of U.S. Presidential and Vice-Presidential debates
62
Analysis of speed characteristics of attracting magnet for magnetic levitation of vehicles
63
Analysis of speed control of series DC motor using diverter and observation of speed saturation point
64
Analysis of speed control system for electrical drives with elastic transmission
65
Analysis of speedup and communication/computation ratio in multiprocessor systems
66
Analysis of speedup as function of block size and cluster size for parallel feed-forward neural networks on a Beowulf cluster
67
Analysis of spent beam refocusing to achieve optimum collector efficiency
68
Analysis of sperm motility with CNN architecture
69
Analysis of Sperm Whale Click by MUSIC Algorithm
70
Analysis of sphere-rod gaps under standard lightning and switching impulse voltages
71
Analysis of spherical annular microstrip antennas
72
Analysis of spherical arrays of microstrip antennas using moment method in spectral domain
73
Analysis of spherical circular microstrip antennas
74
Analysis of spherical harmonic expansion approximations for glow discharges
75
Analysis of spherical hybrid modes in a corrugated conical horn
76
Analysis of Spherical Lens Antennas - Comparison of Three Analysis Methods
77
Analysis of spherical lens antennas - comparison of two approaches
78
Analysis of Spherical Lens Antennas using Spectral Domain Approach
79
Analysis of spherical radar cross-section enhancers
80
Analysis of spherical-circular microstrip antennas on a uniaxial substrate
81
Analysis of spherical-rectangular microstrip antennas
82
Analysis of spherical-wraparound microstrip antennas by spectral domain method
83
Analysis of spheroidal dielectric lens-array antenna
84
Analysis of SPIHT Algorithm Using Tiling Operations
85
Analysis of SpikeProp convergence with alternative spike response functions
86
Analysis of Spillover Effect Brought about by the Change of the Real Estate Stock Price information: Based on a Empirical Analysis of Return Ratio in Hong Kong, Shen Zhen and Shang Hai
87
Analysis of spindle motor performance sensitivity to excitation schemes
88
Analysis of spiral antenna for RFIC
89
Analysis Of Spiral Inductor Model In Cmos Circuit
90
Analysis of spiral-slot-loaded, width-modulated, periodic microstrip lines
91
Analysis of SPKI/SDSI certificates using model checking
92
Analysis of splices in shifted zero dispersion monomode fibre
93
Analysis of spline based auxiliary signal design for failure detection in delay systems
94
Analysis of Split Coaxial Line Type Balun (Correspondence)
95
Analysis of split-anode magnetron interaction
96
Analysis of Split-Capacitor Push–Pull Parallel-Resonant Converter in Boost Mode
97
Analysis of Split-Capacitor Push-Pull Parallel Resonant Converter in normal mode
98
Analysis of split-drain MAGFETs
99
Analysis of split-phase electric machines with unequally-loaded stator windings and distorted phase currents
100
Analysis of split-phase induction motors using an impedance matrix
101
Analysis of Splitting Light in a Double-chain of Coupled Metallic Nanowires
102
Analysis of SPM and XPM phenomena in optical fiber communication systems
103
Analysis of spoke-type IPM machine by step-staggered rotor with alternate airspace-barriers
104
Analysis of spontaneous activity in cultured brain tissue using the discrete wavelet transform
105
Analysis of spontaneous emission and noise in self-pulsing laser diodes
106
Analysis of spontaneous emission rate of distributed feedback semiconductor lasers
107
Analysis of spontaneous MEG activity in Alzheimer´s disease using time-frequency parameters
108
Analysis of spontaneous MEG activity in mild cognitive impairment and Alzheimer´s disease using Jensen´s divergence
109
Analysis of spontaneous MEG activity in mild cognitive impairment using spectral entropies and disequilibrium measures
110
Analysis of Spontaneous MEG Activity in Patients with Alzheimer´s Disease using Spectral Entropies
111
Analysis of Spoofed IP Traffic Using Time-to-Live and Identification Fields in IP Headers
112
Analysis of Sporting Events Using Softbots
113
Analysis of sports statistics via graph-signal smoothness prior
114
Analysis of Spot Prices Arrangements in Deregulated Electricity Market
115
Analysis of Spotlight Synthetic Aperture Radar Ocean Wave Imagery
116
Analysis of sprayed Carbon nanotube films on rigid and flexible substrates
117
Analysis of spread spectrum sliding correlator channel sounding under subway tunnel environment
118
Analysis of spread spectrum time domain reflectometry for wire fault location
119
Analysis of Spreading Codes in Conjunction with Ambiguity Function for Inter Vehicular Communication
120
Analysis of spreading signal in two types of spread spectrum communication scheme in terms of information data bandwidth
121
Analysis of spreadsheet errors made by computer literacy students
122
Analysis of spur-free dynamic range of a semiconductor resonant cavity linear interferometric intensity modulator
123
Analysis of spurious effects in membrane-based micromachined thermal conductivity sensors
124
Analysis of Spurious Emission and In-Band Phase Noise of an All Digital Phase Locked Loop for RF Synthesis using a Frequency Discriminator
125
Analysis of spurious modes in mixed finite element method for Maxwell´s equation with E and H as variables
126
Analysis of spurious resonances in single and multi-element piezocomposite ultrasonic transducers
127
Analysis of spurious spectrum due to RF bursting signals in TDMA-based wireless communications systems
128
Analysis of Spurious Tones in Microwave Oscillators via the Hopf Bifurcation Concept
129
Analysis of Spurious Velocity Overshoot in Hydrodynamic Simulations
130
Analysis of spurious vibrations in mesa-shaped AT-cut quartz plates
131
Analysis of spurious vowel-like regions (VLRs) detected by excitation source information
132
Analysis of SQL injection attack in web service (a case study of website in Aceh province)
133
Analysis of Square and Circular Diaphragms for a MEMS Pressure Sensor Using a Data Mining Tool
134
Analysis of square coaxial lines by using Equivalent Electrodes Method
135
Analysis of square patch antennas for resonant frequency, return loss, gain and bandwidth using ANN
136
Analysis of Square-Law Combining for Cognitive Radios over Nakagami Channels
137
Analysis of Square-Spiral Inductors for Use in MMIC´s (Short Paper)
138
Analysis of Squaring Circuit Mechanizations in Costas and Squaring Loops
139
Analysis of squeeze-film air damping of thick perforated plate in MEMS device
140
Analysis of Squint Angle in Point Target Assessment
141
Analysis of squirrel cage effect in single phase LSPM
142
Analysis of squirrel cage induction motors with broken bars and rings
143
Analysis of squirrel cage induction motors with broken bars and rings
144
Analysis of Squirrel-Cage Induction Generator With Vienna Rectifier for Wind Energy Conversion System
145
Analysis of squirrel-cage induction motor considering hysteresis loss of magnetic material
146
Analysis of SR ARQ delays using data-bundling over Markov channels
147
Analysis of SRAM and eDRAM Cache Memories Under Spatial Temperature Variations
148
Analysis of SRAM bit failure at high frequency operation
149
Analysis of SRAM cell characteristics based on high-k metal-gate strained Si/Si
1−x
Ge
x
MOSFET with consideration of NBTI/PBTI
150
Analysis of SRAM cell designs for low power applications
151
Analysis of SRAM hierarchical bitlines for optimal performance and variation tolerance
152
Analysis of SRAM neutron-induced errors based on the consideration of both charge-collection and parasitic-bipolar failure modes
153
Analysis of SRAM Reliability under Combined Effect of NBTI, Process and Temperature Variations in Nano-Scale CMOS
154
Analysis of SRAM-Based FPGA SEU Sensitivity to Combined Effects of Conducted EMI and TID
155
Analysis of SRM drives behaviour under the occurrence of power converter faults
156
Analysis of SRTM interferometric X-band data: first results
157
Analysis of SSB Power Amplifiers
158
Analysis of SSC dipole quench behavior as a function of quench protection heater configuration
159
Analysis of SSIM performance for Digital Cinema applications
160
Analysis of SSR Marker of Wheat Mutants of Genetic Transformation Mediated by Ion Beam
161
Analysis of SSR Mitigation Using Gate Controlled Series Capacitors
162
Analysis of SSR Performance of TCSC Control Schemes Using a Modular High Bandwidth Discrete-Time Dynamic Model
163
Analysis of SSR signals by super resolution algorithms
164
Analysis of SSR using artificial neural networks [power system simulation]
165
Analysis of SSR With Three-Level Twelve-Pulse VSC-Based Interline Power-Flow Controller
166
Analysis of SST images by weighted Ensemble Transform Kalman Filter
167
Analysis of stabilised output error methods
168
Analysis of stability and accuracy of MOT-based TD-EFIE solvers
169
Analysis of stability and bifurcation in a simple model of power converters with solar cell input
170
Analysis of stability and bifurcations of limit cycles in Chua´s circuit through the harmonic-balance approach
171
Analysis of stability and different speed boosting assist techniques towards the design and optimization of high speed SRAM cell
172
Analysis of stability and higher-order mode interaction for a sheet-beam coupled-cavity slow-wave structure
173
Analysis of stability and numerical dispersion relation of mur's absorbing boundary condition in the ADI-FDTD method
174
Analysis of stability and numerical dispersion relation of Mur’s absorbing boundary condition in the ADI-FDTD method
175
Analysis of stability and performance of adaptation algorithms with time-invariant gains
176
Analysis of Stability and Robust Stabilization for Impulsive Switched Stochastic Systems
177
Analysis of stability aspects of a large constant power load in a local grid
178
Analysis of stability control of a power system with a distributed constant circuit model
179
Analysis of Stability Degradation of SRAMs Using a Physics-Based PBTI Model
180
Analysis of stability for n-connected Timoshenko beams with both ends fixed and feedback controller at intermediate nodes
181
Analysis of stability for networks including converters
182
Analysis of stability for rotor-sliding-bearing system based on H
∞
control theory
183
Analysis of stability for the controlled spacecraft with a deployable and retractable flexible appendage
184
Analysis of stability for the controlled spacecraft with a deployable flexible appendage
185
Analysis of Stability in Distributed Detection System with Network Delay
186
Analysis of Stability in FAST Flow Control
187
Analysis of stability in hand-written dynamic signatures
188
Analysis of Stability in Static Signatures Using Cosine Similarity
189
Analysis of stability in two-mode laser systems
190
Analysis of stability issues and power efficiency of symmetric and asymmetric low power nanoscaled SRAM cells
191
Analysis of stability issues during reconfiguration of shipboard power systems
192
Analysis of Stability Limitations of a VSC-HVDC Link Using Power-Synchronization Control
193
Analysis of stability nonlinear systems with varying parameters using Popov criterion
194
Analysis of stability of an optical phase-locked loop
195
Analysis of Stability of Dam Slope during Rapid Drawdown of Reservoir Water Level
196
Analysis of Stability of MOT Scheme with Different Temporal Basis Functions
197
Analysis of stability of unsaturated soil slope based on modified cam-clay model
198
Analysis of stability robustness of a power system with loads represented by induction motors
199
Analysis of stability with parallel interconnection of direct current voltage converters
200
Analysis of stabilization circuits for phase-noise reduction in microwave oscillators
201
Analysis of stabilizing control of discrete-time fuzzy bilinear system
202
Analysis of stabilizing control of discrete-time fuzzy bilinear system
203
Analysis of stable and unstable manifolds in fluid flows using Lagrangian Coherent Structures
204
Analysis of stable area of two-cell cascaded H-Bridge rectifier
205
Analysis of Stable Availability of Organizations in Emergency Management of Ship Oil Spill
206
Analysis of stable limit cycle in passive walking
207
Analysis of stable operating condition of q-axis current feedback control system of IPMSM in flux weakening region
208
Analysis of stable working for the buffered PPS
209
Analysis of stacked microstrip patches with a mixed potential integral equation
210
Analysis of Stacked Rectangular Microstrip Antenna
211
Analysis of stacked rectangular patch antennas with nonaligned patches or unequal patch sizes
212
Analysis of stadium ring resonator sensor with dual photonic crystal microcavity
213
Analysis of stagnation behavior of vector evaluated particle swarm optimization
214
Analysis of stagnation behaviour of competitive coevolutionary trained neuro-controllers
215
Analysis of stairs-climbing ability for a tracked reconfigurable modular robot
216
Analysis of stakeholder benefits of NextGen Trajectory-Based Operations
217
Analysis of stakeholder on the construction of electric vehicle charging station in China
218
Analysis of Stakeholder/Value Dependency Patterns and Process Implications: A Controlled Experiment
219
Analysis of stand-alone GPS for relative location discovery in wireless sensor networks
220
Analysis of standard and non-standard control modes for modular converters with synchronous modulation
221
Analysis of standard clustering algorithms for grouping MEDLINE abstracts into evidence-based medicine intervention categories
222
Analysis Of Standing Up Of Hemiplegia
223
Analysis of standing waves in millimetre-wave optics
224
Analysis of STAP algorithms for cases with mismatched steering and clutter statistics
225
Analysis of STAP on MDV for Spaceborne SAR-GMTI Applications
226
Analysis of star ratings in consumer reviews: A case study of Yelp
227
Analysis of star tracker/accelerometer inertial navigation system in theory
228
Analysis of star-star-delta_utilized transformer under balanced and unbalanced load conditions
229
Analysis of starting and synchronization process for line start IPM motors
230
Analysis of starting characteristics of direct-current motors
231
Analysis of Starting Characteristics of Direct-Current Motors
232
Analysis of Starting Circuits for a Class of Hard Oscillators: Two-Transistor Saturable-Core Parallel Inverters
233
Analysis of starting circuits for a class of hard oscillators: two-transistor saturable-core parallel inverters
234
Analysis of starting performance and frequency characteristics of synchronous reluctance motors
235
Analysis of starting performance of induction machines under rotor winding faults
236
Analysis of startup behavior in a “C-shaped” armature using linked EMAP3D/DYNA3D finite element codes
237
Analysis of start-up characteristics of CMOS crystal oscillators
238
Analysis of start-up characteristics of crystal oscillators
239
Analysis of start-up inrush current and its mitigation control strategy for grid connected voltage source inverter
240
Analysis of STATCOM under 3 phase balanced reactive load
241
Analysis of state estimation for power system using weighted least square method
242
Analysis of state of water in Kraft-paper impregnated oil and its effect on conduction phenomena
243
Analysis of State Transition Diagrams for RFID-Based Two-Way Access Control
244
Analysis of state variable control of UPFC device in multi-machine power system
245
Analysis of state-dependent probabilistic server interruptions in discrete-time queues
246
Analysis of state-owned commercial banks on-line sites frequent transactions and structural equation modeling achieve
247
Analysis of states transition for a humanoid robot SJTU-HR1: Rising up from a supine position to erect stance
248
Analysis of State-Space Equations via Laguerre Polynomials
249
Analysis of static and dynamic behaviour of SiC and Si devices connected in cascode configuration
250
Analysis of static and dynamic characteristics in v.i.l.
251
Analysis of Static and Dynamic Characteristics of a Tactile Sensor using Carbon Micro Coil inside an Elastic Material
252
Analysis of static and dynamic FG errors for motor speed control (driven by a single Hall element sensor)
253
Analysis of static and dynamic performance of organic inverter circuits based on dual and single gate organic thin film transistors
254
Analysis of Static and Dynamic Scenarios of MIMO Systems for Physical Layer Modeling for Vehicular Communication
255
Analysis of Static Characteristics in a Slotless Type Permanent Magnet Machines Based on the Concept of Transfer Relations
256
Analysis of Static Characteristics in Slotless-Type Permanent Magnet Machines Based on the Concept of Transfer Relations
257
Analysis of static characteristics in slotless-type synchronous machine with bread shape permanent magnets
258
Analysis of static characteristics of a bipolar-mode SIT (BSIT)
259
Analysis of static eccentricity in squirrel cage induction motors
260
Analysis of static idealized 1D/2D optical CDMA correlation receivers using fiber Bragg grating
261
Analysis of Static Latchup in a Vertical IGBT Device Operating at 300K and 77K
262
Analysis of static noise margin and power dissipation of a proposed low voltage swing 8T SRAM cell
263
Analysis of static noise margin and power-gating efficiency of a new nonvolatile SRAM cell using pseudo-spin-MOSFETs
264
Analysis of static noiseless OC
2
DMA correlation receivers using fiber Bragg grating
265
Analysis of static performance for flux-switching motor by nonlinear equivalent magnetic circuit model
266
Analysis of static VAr compensators installed in different positions in electric railways
267
Analysis of static versus fully-dynamic routing in IP/GMPLS over WDM optical networks with physical-layer impairment constraints
268
Analysis of static voltage balance of series connected self-power emitter turn-off thyristors
269
Analysis of static/dynamic 2-D optical CDMA correlation and chip level receivers under both shot and thermal noises using array waveguide grating
270
Analysis of stationarity and statistical changes in myographic signals from respiratory muscles
271
Analysis of statistic model of digital radiometer detector
272
Analysis of statistical algorithms for the comparison of data distributions in physic experiments
273
Analysis of Statistical Data Quality
274
Analysis of statistical features for fault detection in ball bearing
275
Analysis of Statistical Methods for Automatic Detection of Congestive Heart Failure and Atrial Fibrillation with Short RR Interval Time Series
276
Analysis of statistical models for iterative reconstruction of extremely low-dose CT data
277
Analysis of Statistical Sampling in Microarchitecture Simulation: Metric, Methodology and Program Characterization
278
Analysis of statistical texture features for automatic lung cancer detection in PET/CT images
279
Analysis of statistical training method
280
Analysis of statistical uncertainties involved in estimating ergodic MIMO capacity and diversity gain in Rayleigh fading environment
281
Analysis of statistical variation in NBTI degradation of HfO
2
/SiO
2
FETs
282
Analysis of stator current of induction motor used in transport system at single phasing by measuring phase angle, symmetrical components, skewness, kurtosis and harmonic distortion in park plane
283
Analysis of stator current waveforms of induction motor with broken bar conditions
284
Analysis of stator ground protection schemes for hydro-generator of Three-Gorges power plant based on zero sequence voltages
285
Analysis of stator iron loss in interior PM machines under open and short-circuit conditions
286
Analysis of stator leakage reactance computation with finite element methods
287
Analysis of stator short-circuit faults for induction machine using finite element modeling
288
Analysis of Stator Temperature Field on Synchronous Generator Loss of Field Asynchronous Operating
289
Analysis of stator voltage observers for a doubly fed induction generator
290
Analysis of stator winding inter-turn short circuit fault of PMSM for electric vehicle based on finite element simulation
291
Analysis of stator winding inter-turn short-circuit fault in interior and surface mounted permanent magnet traction machines
292
Analysis of Stator Winding Inter-Turn Short-Circuit Faults in Induction Machines for Identification of the Faulty Phase
293
Analysis of stator winding parallel-connected branches circulating current and its application in generator fault diagnosis
294
Analysis of Status and Development Trends of Digital Ocean
295
Analysis of status of Beijing rural sewage treatment
296
Analysis of status quo and disposal pattern of rural domestic waste of China´s northwest loess landform area
297
Analysis of status quo, problems and potential about waste heat recovery of NSP cement production lines´ exhaust gas
298
Analysis of Steady Heat Conduction in a Ti-6Al-4V/ZrO2 Composite FGM Plate under Convective Heat Transfer Boundary Based on FEM
299
Analysis of steady state behavior of second order sliding mode algorithms
300
Analysis of Steady State Detection of Resistive Bridging Faults in BiCMOS Digital ICs
301
Analysis Of Steady State Heat Conduction Moblems By Finite Element Method
302
Analysis of Steady State Stability of a Two Machine System by the D-Decomposition Technique
303
Analysis of Steady State Voltage Stability in Large Scale Power Grid Including Actions of CSVC
304
Analysis of Steady Thermal Stress in a ZrO2/FGM/Ti-6Al-4V Composite ECBF Plate with Temperature-Dependent Material Properties by NFEM
305
Analysis of steady-state and transient performance of two-phase PM motors for computer fans
306
Analysis of steady-state cascaded stimulated Brillouin scattering in a fiber Fabry-Perot resonator
307
Analysis of steady-state common-mode response in differential LC-VCOs
308
Analysis of steady-state excess mean-square-error of the least mean kurtosis adaptive algorithm
309
Analysis of steady-state operation of a multistack variable-reluctance stepper motor using
qd
0 variables
310
Analysis of steady-state operation of Bao´an converter station´s Y/Y converter transformer substitute Zhaoqing converter station´s converter transformer
311
Analysis of steady-state operation of DFIG-based wind turbines in power systems
312
Analysis of steady-state performance for cross-directional control
313
Analysis of Steady-State Transients in Distributed Low-Voltage Power Systems with Rectified Loads
314
Analysis of stearic acid adsorbed on silver surfaces using optical spectroscopic techniques
315
Analysis of steep-fronted voltage distribution and turn insulation failure in inverter fed AC motor
316
Analysis of steep-fronted voltage distribution and turn insulation failure in inverter-fed form-wound AC motor
317
Analysis of steerable active slot array applicator
318
Analysis of steering control in vehicles with two independent left and right traction wheels
319
Analysis of Steering Vector Mismatch on Adaptive Noncoherent Integration
320
Analysis of step discontinuities in rectangular MMI coupler by beam propagation method
321
Analysis of step discontinuities on planar dielectric waveguide containing a gyrotropic layer
322
Analysis of Step Discontinuity in a Single Mode Planar Slab Taper Optical Waveguide
323
Analysis of Step Tracking in Normal Human Subjects
324
Analysis of step transitions in optical fibers using periodic boundary conditions
325
Analysis of Step-down Resonant Switched Capacitor Converter with Sneak Circuit State
326
Analysis of stepped frequency pulse train
327
Analysis of stepped septum polarisers
328
Analysis of Stepped-Frequency Pulse Train Design
329
Analysis of stepped-impedance slot antenna
330
Analysis of step-stress accelerated-life-test data: a new approach
331
Analysis of stereo vision-based measurements of laboratory water waves
332
Analysis of stereophonic image vibration in AM stereophonic broadcasting
333
Analysis of stereoscopic 3DTV broadcasting for ISDB-TB system
334
Analysis of steroid hormones in a constructed wetland systems
335
Analysis of stick-slip motion in Coulomb damped systems
336
Analysis of stiffener bonded composite laminate with multiple site damages
337
Analysis of stiffness of human fingertip and comparison with artificial fingers
338
Analysis of stimulated Raman scattering in waveguides
339
Analysis of Stimulating effect on civilian car consumption to economic development: Empirical research of Sichuan Province based on VAR model
340
Analysis of Stirling engine performance
341
Analysis of stitch line for monolithic microwave integrated circuits
342
Analysis of Stochastic
-Coverage and Connectivity in Sensor Networks With Boundary Deployment
343
Analysis of stochastic approximation schemes with discontinuous and dependent forcing terms with applications to data communication algorithms
344
Analysis of stochastic automata algorithm for relaxation labelling
345
Analysis of Stochastic Automata Networks using copula functions
346
Analysis of stochastic behavior of switched linear networks
347
Analysis of stochastic behaviour of linear circuits using first-order second-moment and adjoint network techniques
348
Analysis of Stochastic Electromechanical Systems
349
Analysis of stochastic gradient algorithms for linear regression problems
350
Analysis of stochastic gradient identification of Hermite polynomial systems with memory
351
Analysis of stochastic gradient identification of polynomial nonlinear systems with memory
352
Analysis of stochastic gradient identification of Wiener-Hammerstein systems for nonlinearities with Hermite polynomial expansions
353
Analysis of stochastic gradient tracking of time-varying polynomial Wiener systems
354
Analysis of stochastic k-coverage in wireless sensor networks with boundary deployment
355
Analysis of Stochastic Radio Channels With Temporal Birth-Death Dynamics: A Marked Spatial Point Process Perspective
356
Analysis of stochastic resonances in electromagnetic couplings to transmission lines
357
Analysis of stock market information — a new financial engineering approach
358
Analysis of stock market using text mining and natural language processing
359
Analysis of stop-band frequency selective surfaces with Dürer´s pentagon pre-fractals patch elements
360
Analysis of Stop-Band Frequency Selective Surfaces With Dürer´s Pentagon Pre-Fractals Patch Elements
361
Analysis of stopping constellation distribution for irregular non-binary LDPC code ensemble
362
Analysis of stopping criteria for the EM algorithm in the context of patient grouping according to length of stay
363
Analysis of storage energy usage in residential areas with regard to smartgrids and natiaonal economy
364
Analysis of storage requirements for video-on-demand servers
365
Analysis of storage technologies within smart grid framework
366
Analysis of Straight Periodic Segmented Waveguide Using the 2-D Finite Element Method
367
Analysis of Straight Tapered Microstrip Transmission Lines - ASTMIC (Computer Program Descriptions)
368
Analysis of strain compensated GaAs-based InAs QD solar cells
369
Analysis of Strain Distribution in A15-Type Superconducting Coils Under Compressive Stress
370
Analysis of Strain Effect on Critical Current Density in Superconductors With a Modified Semiempirical Kim Model
371
Analysis of Strain Effects in Ballistic Carbon Nanotube FETs
372
Analysis of strained InGaAs/GaAs multi-quantum-well waveguide defined by ion implantation
373
Analysis of strained plastic optical fibers
374
Analysis of strained-Si device including quantum effect
375
Analysis of strained-silicon-on-insulator double-gate MOS structures
376
Analysis of strain-induced polarisation-insensitive integrated waveguides fabricated using ion-implantation-induced intermixing
377
Analysis of Strap Losses for High Power High Frequency Inductors
378
Analysis of strategic decision-making of company´s project investment based on portfolio theory
379
Analysis of strategic faults in distribution adjustment of Chinese state-own corporation reforming under influence of world wide economic crisis
380
Analysis of strategic interactions among generation companies using conjectured supply function equilibrium model
381
Analysis of strategic supply management: A switching cost view
382
Analysis of strategic wind power participation in energy market using MASCEM simulator
383
Analysis of strategies detering opportunism by contractors
384
Analysis of strategies for constructive general block placement
385
Analysis of strategies for serial-search spread-spectrum code acquisition-direct approach
386
Analysis of Strategies to Save Energy for Message-Passing Dense Linear Algebra Kernels
387
Analysis of Stratified Flow and Separation over Complex Bathymetry in a Field-Scale Estuarine Model
388
Analysis of stratified testing for multichip module systems
389
Analysis of stray current, track-to-earth potentials and substation negative grounding in DC traction electrification system
390
Analysis of stray currents for traction vehicles
391
Analysis of stray inductance´s influence on SiC MOSFET switching performance
392
Analysis of stray loss and its determination with equivalent circuit for double cage rotor induction motor
393
Analysis of stray paths for parasitic currents in some topologies of Yokeless and Segmented Armature Axial Flux PM Machines
394
Analysis of stream flow characteristics of the Hailiutu River in the central Yellow River, China
395
Analysis of stream-dependent tying structure for HMM-based speech synthesis
396
Analysis of streamers in pulsed corona and dielectric barrier discharges
397
Analysis of streaming electrification nonlinearity in swinging cylinder system
398
Analysis of streaming GPS measurements of surface displacement through a web services environment
399
Analysis of streaming social networks and graphs on multicore architectures
400
Analysis of Streamline Separation at Infinity Using Time-Discrete Markov Chains
401
Analysis of Strength Characteristics of Deep Sea Sediments from Potential Manganese Nodule Mining Area in the North Central Pacific
402
Analysis of strength reduction factor of RC frames
403
Analysis of Strengthening Plan and Construction Control Points of Single Box Single Room Prestressed Concrete Continuous Box Girder Bridge
404
Analysis of strengths and weaknesses of employing E-learning in language learning classes
405
Analysis of stress and strain distribution on pad during bump bonding process
406
Analysis of stress and strain energy fields in craniofacial fracture
407
Analysis of stress buffer effect of polyimide for board level drop test by a finite element analysis
408
Analysis of Stress Distribution in Helical Coils With Geodesic Windings Based on Virial Theorem
409
Analysis of stress distribution on end winding of large water filling submersible motor during steady state operation
410
Analysis of stress in power bipolar devices during inductive turn-off
411
Analysis of stress in silicon-based microsystems by X-ray diffraction techniques
412
Analysis of Stress in speech using adaptive Empirical Mode Decomposition
413
Analysis of stress in the fiber-array with FEM
414
Analysis of stress on beam of small-range high-precision quartz flexible accelerometer
415
Analysis of stress relaxation and data acquisition in the Compression Process of Herbage Materials
416
Analysis of stress-dependent hysteresis in soft amorphous materials [Fe
64
Co
21
B
15
ribbons]
417
Analysis of stressed power systems using normal forms
418
Analysis of stresses in drilled composite materials
419
Analysis of stress-induced degradation in CdS/CdTe solar cells
420
Analysis of stretch-activated ion channels
421
Analysis of striking distances of lightning strokes to vertical towers
422
Analysis of string encoding functions during de-duplication process
423
Analysis of stripe multilayer waveguides with effective index and finite element methods
424
Analysis of strip-grating structure with ASBC
425
Analysis of striping techniques in robotic storage libraries
426
Analysis of stripline and waveguide discontinuities as a 2D-problem using finite difference-time domain method
427
Analysis of stripline circuit consisting of 45 degrees bend and waveguide by mode theory based equivalent network
428
Analysis of Stripline Filled with a Multilayered Dielectric Medium
429
Analysis of stripline filled with multiple dielectric regions
430
Analysis of stripline right-angle bend with slant-wise corner cut based on eigenmode expansion method and Foster-type equivalent network
431
Analysis of stripline right-angle bend with slantwise corner cut based on Foster-type equivalent network and exact calculation of eigenmode
432
Analysis of stripline T-junction with rectangular cut based on eigenmode expansion method and Foster-type equivalent network
433
Analysis of stripline/slot transition
434
Analysis of stripline-fed slot-coupled patch antennas with vias for parallel-plate mode suppression
435
Analysis of strip-loaded hard struts using finite element method and asymptotic strip boundary conditions
436
Analysis of strip-slot coupled circuits in a multilayered medium using a new calculation technique for the Green´s functions
437
Analysis of stroboscopic signal sampling for radar target detectors and range finders
438
Analysis of stroke Magnetic resonance images
439
Analysis of stroke structures of handwritten Chinese characters
440
Analysis of Stroke using texture features
441
Analysis of Stroking Motions in Drawing by Experts for Development of a Learning Support System
442
Analysis of Strong Coupling in Coupled Oscillator Arrays
443
Analysis of strong inductive coupling on SQUID systems
444
Analysis of strong resonance in power systems with STATCOM supplementary modulation controller
445
Analysis of strong-field enhanced ionization of molecules using Bohmian trajectories
446
Analysis of Strongly and Weakly Coupled Management Systems in Information Security
447
Analysis of strongly guiding rib waveguide S-bends: theory and experiment
448
Analysis of strongly modulated multicomponent signals with the short-time Fourier transform
449
Analysis of strongly nonlinear circuits with a frequency-domain method coupled with a consistent large-signal model
450
Analysis of structural anechoic chamber design for improvement of anechoic chamber performance
451
Analysis of structural brain connectivity in 6 cases of hemispherectomy
452
Analysis of Structural Change Point in Multivariate Regression Models: An Application on IT Productivity Impact
453
Analysis of structural characteristics and driving factors for polder landscape based on Landsat ETM+ data in the East Chaohu Area, China
454
Analysis of structural mechanics of solid microneedle using COMSOL software
455
Analysis of Structural Parameters of Metal Multi-convolution Ring
456
Analysis of structural pounding between adjacent RC frames
457
Analysis of structural properties in extended marked graphs
458
Analysis of structural properties responsible for nonlinear modal behavior of a stressed power system using the normal form technique
459
Analysis of structural robustness of metabolic networks
460
Analysis of Structural Similarity in Mammograms for Detection of Bilateral Asymmetry
461
Analysis of Structural Social Capital in Online Social Networks
462
Analysis of structural variation and threshold voltage modulation in 10-nm double gate-all-around (DGAA) transistor
463
Analysis of structural vibration characteristics of Harmonic drive
464
Analysis of structural-acoustic interactions in metal-ceramic transducers
465
Analysis of Structurally Transmitted Vibration of HDD in Notebook Computer
466
Analysis of structurally transmitted vibration of HDD in notebook computer
467
Analysis of structure and length impact for double road train passing ability simulation
468
Analysis of structure and mechanics feature of axial permanent bearings based on ANSYS
469
Analysis of structure and parameters in wireless power transmission system with consideration of losses in source
470
Analysis of structure and stability for the simplest two-dimensional fuzzy controller using generalized trapezoid-shaped input fuzzy sets
471
Analysis of structure geometry and interface charge on electrical characteristics of InAlN/GaN HEMTs
472
Analysis of structure of Chinese Instant Messaging market based on network externality
473
Analysis of structure of intelligent park multi-level energy transfer model
474
Analysis of structure parameters for urban traffic networks
475
Analysis of structured excitation codebooks used in CELP speech compression algorithms
476
Analysis of structures and surface states of the nanodiamond particle synthesised by detonation
477
Analysis of Structures Containing Sharp Oblique Metal Edges in FDTD Using MAMPs
478
Analysis of Structuring Variants of Loading Devices for the Systems of Electric Supply of Space Aircrafts
479
Analysis of STS fault current with minimization method of STS turn off delay time
480
Analysis of STT-RAM cell design with multiple MTJs per access
481
Analysis of Stub Loaded Circular Microstrip Antennas
482
Analysis of stub loaded equilateral triangular microstrip antennas
483
Analysis of stub loaded microstrip patch antennas
484
Analysis of stub loaded rectangular microstrip antenna
485
Analysis of Student Behaviors in Using WeChat / WhatsApp for Language Learning at Diploma Level in Hong Kong: A Pilot Test
486
Analysis of student´s context in e-Learning
487
Analysis of student´s reflections upon the efficacy of their note-taking activities in a blended learning course
488
Analysis of students behaviour in virtual environment
489
Analysis of students´ behaviour in e-learning system
490
Analysis of students´ employability self-efficacy and entrepreneurial career intention: using labor market information as a mediator variable
491
Analysis of students´ expectations and skills in e-learning
492
Analysis of students´ study paths using finite Markov chains
493
Analysis of s-turn approaches at John F. Kennedy Airport
494
Analysis of s-turn approaches at John F. Kennedy airport
495
Analysis of sub threshold leakage reduction techniques in deep sub micron regime for CMOS VLSI circuits
496
Analysis of sub-1 keV implants in silicon using SIMS, SRP, MEISS and DLTS: the xRLEAP low energy, high current implanter evaluated
497
Analysis of sub-anatomic volume changes in Alzheimer brain using diffusion tensor imaging
498
Analysis of subband adaptive filters
499
Analysis of Sub-Band Allocation in Multi-Service Cognitive Radio Access Networks
500
Analysis of subband quantization noise level and shapes: a function of wideband audio codec tandemming
501
Analysis of subband vector quantiser using colour spaces
502
Analysis of subcarrier intensity modulation-based optical wireless DF relaying over turbulence channels with path loss and pointing error impairments
503
Analysis of Subcarrier Multiplexed Quantum Key Distribution Systems: Signal, Intermodulation, and Quantum Bit Error Rate
504
Analysis of subcarrier pairing in a cellular OFDMA relay link
505
Analysis of sub-cortical regions in cognitive processing using fuzzy c-means clustering and geometrical measure in autistic MR images
506
Analysis of Subframe Generation for Superimposed Images
507
Analysis of Subgraph-Centric Distributed Shortest Path Algorithm
508
Analysis of subharmonic oscillation of fixed-frequency current-programming switch mode power converters
509
Analysis of subharmonic resonance in ultrasonic testing of a closed crack based on gap-width-dependent property of interfacial stiffness
510
Analysis of sub-harmonics in power systems
511
Analysis of sub-mesoscale eddies in the Baltic Sea based on SAR imagery and model wind data
512
Analysis of submicron double-gated polysilicon MOS thin film transistors
513
Analysis of Submicron MOS Device Characteristics Using a Composite Full Three-Dimensional Process/Device Simulation System
514
Analysis of Sub-Millimeter Wave Four-Port Quasi-Optical Circulator
515
Analysis of suboptimal Kalman tracking algorithms
516
Analysis of sub-optimum operation of class E amplifier
517
Analysis of sub-picosecond mid-infrared pulse propagation in a quantum cascade laser below and above threshold
518
Analysis of subreflectors for dual reflector antennas
519
Analysis of subscribers´ usages and attitudes for video IP telephony services over NGN
520
Analysis of Subsequence Time-Series Clustering Based on Moving Average
521
Analysis of Subsidy Decision for Telecom-Operator in a Two-Echelon Supply Chain
522
Analysis of subspace fitting and ML techniques for parameter estimation from sensor array data
523
Analysis of subspace fitting based methods for sensor array processing
524
Analysis Of Subspace Identification Methods Based On The Estimation Of The System Matrices
525
Analysis of Subspace-based Face Recognition Techniques under Changes in Imaging Factors
526
Analysis of substation availability
527
Analysis of substation data for knowledge extraction
528
Analysis of substation noise prediction based on equivalent source method
529
Analysis of substrate coupling by means of a stochastic method
530
Analysis of Substrate Current and HCI Phenomena in High Voltage NMOSFET
531
Analysis of substrate deep-trap effects on the turn-on characteristics in GaAs MESFETs
532
Analysis of Substrate Integrated Slab Waveguides (SISW) by the BI-RME method
533
Analysis of substrate integrated waveguide based on two dimensional multi-port method
534
Analysis of Substrate Integrated Waveguide Structures Based on the Parallel-Plate Waveguide Green´s Function
535
Analysis of substrate integrated waveguide structures using contour integral equation
536
Analysis of substrate integrated waveguides by asymptotic strips boundary conditions
537
Analysis of substrate integrated waveguides by transverse resonant technique
538
Analysis of substrate noise propagation in a lightly doped substrate [mixed-signal ICs]
539
Analysis of substrate shielding methods for sub-THz on-chip inductors
540
Analysis of substrate thermal gradient effects on optimal buffer insertion
541
Analysis of substrate type and thickness influence on wettability of Nb2O5 thin films
542
Analysis of subsurface scattering under generic illumination
543
Analysis of subsynchronous control interactions in DFIG-based wind farms: ERCOT case study
544
Analysis of Subsynchronous Oscillation (SSO) Damping Characteristic of the AC/HVDC Parallel Transmission System Using TCSC
545
Analysis of subsynchronous oscillations at capacitor commutated converters
546
Analysis of sub-synchronous resonance in doubly-fed induction generator-based wind farms interfaced with gate – controlled series capacitor
547
Analysis of subsynchronous resonance with three level twelve-pulse VSC based SSSC
548
Analysis of Subsynchronous Torsional Interaction of HVDC System Integrated Hydro Units With Small Generator-to-Turbine Inertia Ratios
549
Analysis of Subsynchronous Torsional Interaction With Power Electronic Converters
550
Analysis of subsynchronous torsional interactions with FACTS devices
551
Analysis of subsynchronous torsional interactions with static Var Compensators
552
Analysis of sub-synchronous torsional interactions with static VAR compensators-effect of network and load characteristics
553
Analysis of subsystem integration in aircraft power distribution systems
554
Analysis of subsystems behaviour and performance evaluation of solar photovoltaic powered water pumping system
555
Analysis of subsystems coordination for electric vehicle during straight-line braking and brake-in-turn
556
Analysis of subthreshold carrier transport for ultimate DGMOSFET
557
Analysis of subthreshold characteristics of p-MOSFETs with (0/90°) and 45° channel orientation
558
Analysis of Subthreshold Finfet Circuits for Ultra-Low Power Design
559
Analysis of subthreshold leakage reduction in CMOS digital circuits
560
Analysis of sub-threshold swing and performance of various tunnel transistors
561
Analysis of subthreshold swing in multichannel tunneling carbon nanotube field effect transistor (MT-CNTFET)
562
Analysis of subtle movements related to neurodegenerative diseases using wearable inertial sensors: A study in healthy subjects
563
Analysis of sub-transmission networks with distributed generation
564
Analysis of sub-wavelength cavity leaky-wave antennas with high-impedance surfaces
565
Analysis of subwavelength traffic grooming efficiency in optical mesh networks
566
Analysis of success factors of ISO 14001 implementation — A case study in a cement company in Indonesia
567
Analysis of Success Rate of Attacking Knapsacks from JUNA Cryptosystem by LLL Lattice Basis Reduction
568
Analysis of Successive Interference Cancellation in CDMA Systems
569
Analysis of Successive Interference Cancellation Scheme using OOC code in Optical CDMA Systems
570
Analysis of succinylcholine chloride residue and toxicity in experimental mice
571
Analysis of sudden short circuit current for PMSG
572
Analysis of sudden unbalanced short circuits in synchronous machines by applying the principle of harmonic balance
573
Analysis of suitability and prospect of the application of cloud computing in agricultural economy in China
574
Analysis of suitable PWM topologies to meet very high efficiency requirements for on-board DC/DC converters in future telecom systems
575
Analysis of sum-difference converter with high identity of amplitude and phase characteristics
576
Analysis of summer 2002 melt extent on the Greenland ice sheet using MODIS and SSM/I data
577
Analysis of sum-product decoding of low-density parity-check codes using a Gaussian approximation
578
Analysis of sum-rate gain for multiuser MIMO downlink system with limited feedback and feedback resource constraint
579
Analysis of Sum-Weight-Like Algorithms for Averaging in Wireless Sensor Networks
580
Analysis of Sunspot Time Series (1749-2014) by Means of 0-1 Test for Chaos Detection
581
Analysis of Super Cut-off Transistors for Ultralow Power Digital Logic Circuits
582
Analysis of super resolution Spectral Estimation Techniques for indoor positioning applications
583
Analysis of Supercapacitor as Second Source Based on Fuel Cell Power Generation
584
Analysis of supercapacitor connection to PV power conditioning systems for improoved performance
585
Analysis of Supercapacitor Energy Loss for Power Management in Environmentally Powered Wireless Sensor Nodes
586
Analysis of Superconducting Dipole Coil of 11 GeV Super High Momentum Spectrometer
587
Analysis of Superconducting Homopolar Synchronous Motor using 3D inductance parameter
588
Analysis of superconducting magnet (SCM)-ground coil interactions for EDS Maglev coil configurations
589
Analysis of superconducting microstrip antennas
590
Analysis of superconducting microstrip lines and resonators using the complex resistive boundary conditions and the variational principle
591
Analysis of superconducting microwave structures: application to microstrip lines
592
Analysis of superconducting thin film using an approximate model of the current distribution
593
Analysis of superconducting transmission-line structures for passive microwave device applications
594
Analysis of supercontinuum generation in soft glass photonic crystal fibers with cross-correlation frequency-resolved optical gating
595
Analysis of superframe duration adjustment scheme for IEEE 802.15.4 networks
596
Analysis of Super-Gaussian Ultra-Short Pulse Propagation in Nonlinear Optical Fibers
597
Analysis of superimposed fiber Bragg gratings using the microwave V-I transmission matrix formalism
598
Analysis of Superimposed Oriented Patterns
599
Analysis of superimposed signals using time-scale phase representation
600
Analysis of Super-Lift Luo-Converters with capacitor voltage drop
601
Analysis of superposition of two resonant lines in atomic-beam device
602
Analysis of superstrate loaded cylindrical-rectangular microstrip antennas using the electric surface current method
603
Analysis of Superstrate Loaded Slit Cut Circular Patch Antenna for Triple Band Operations
604
Analysis of Supervised Maximum Likelihood Classification for remote sensing image
605
Analysis of supervised text classification algorithms on corporate sustainability reports
606
Analysis of SUPL A-GPS (Secure User Plane Location) in indoor areas
607
Analysis of supplementary controls in damping subsynchronous oscillations
608
Analysis of supplementary information emerging from the ICA based ICTD
609
Analysis of supplier equilibrium strategy considering transmission constraints
610
Analysis of supplier-buyer lot-sizing game model and demand fluctuation under stochastic demand
611
Analysis of supply and ground noise sensitivity in ring and LC oscillators
612
Analysis of supply chain adaptability based on self-organization
613
Analysis of Supply Chain Contract Clauses on Supplier Flexibility
614
Analysis of supply chain coordination with integrated contract of trade credit and quantity discount
615
Analysis of supply chain coordination with profit sharing under clearance and disposal sale markets
616
Analysis of Supply Chain Management Based on Product Types and Life Cycle
617
Analysis of Supply Chain Management Mode of Strategic Supplier Selection and Evaluation
618
Analysis of supply chain procurement strategy in e-marketplace
619
Analysis of supply chain system stability based on network structure entropy
620
Analysis of supply chains using system dynamics, neural nets, and eigenvalues
621
Analysis of supply function equilibrium in electricity markets with financial options contracts
622
Analysis of Supply Voltage Distortion Effects on Induction Motor Operation
623
Analysis of supply voltage distortion effects on induction motor operation
624
Analysis of supply voltage distortion effects on induction motor operation
625
Analysis of supply voltage sensitivity for the performance of the permanent magnet synchronous motors
626
Analysis of Support Region for Laplacian Source´s Scalar Quantizers
627
Analysis of support vector machines
628
Analysis of support vectors helps to identify borderline patients in classification studies
629
Analysis of suppressing electromagnetism interference on airborne oil meter
630
Analysis of suppression capacity of dipoles in adaptive arrays for CDMA systems
631
Analysis of surcharge preloading reinforcement effect in a certain expressway´s soft foundation
632
Analysis of surface acoustic wave resonators with boundary element method
633
Analysis of surface acoustic wave~s thermal behaviors on langasite using lagrangian effective material constants
634
Analysis of surface and substrate deep-trap effects on gate-lag phenomena in GaAs MESFETs
635
Analysis of surface atrial signals using spectral methods for time series with missing data
636
Analysis of surface charging effects in passivated AlGaN-GaN FETs using a MOS test electrode
637
Analysis of surface current characteristics flowing on cord plug surface in accelerated tracking tests
638
Analysis of surface current properties in the Gulf of Finland using data from surface drifters
639
Analysis of surface discharge activity in epoxy nanocomposites in liquid nitrogen under AC voltage
640
Analysis of surface electromyogram during gait by modified matching pursuit decomposition
641
Analysis of Surface Electromyography Signals using Continuous Wavelet Transform for Feature Extraction
642
Analysis of surface Electromyography signals using ZAM based quadratic time frequency distribution
643
Analysis of surface EMG signal based on empirical mode decomposition
644
Analysis of surface EMG signals during dynamic contraction using Lempel-Ziv complexity
645
Analysis of surface EMG signals in biceps curls using maximum singular value estimation
646
Analysis of surface EMG with apparent movement of tactile sense
647
Analysis of surface EMG-force relation of the first dorsal interosseous muscle
648
Analysis of Surface Generation Mechanisms in MOS Capacitors
649
Analysis of surface iterated kink phenomena of GaAs MESFETs
650
Analysis of surface micro machined RF MEMS phase shifters
651
Analysis of Surface Mount Thermal and Thermal Stress Performance
652
Analysis of surface non-uniformity for melanomas using irregularity and asymmetry of virtual contours
653
Analysis of surface permanent magnet machines with fractional-slot concentrated windings
654
Analysis of surface plasmon guided sub-wavelength microdisk cavity
655
Analysis of Surface Plasmon Polariton Using Anisotropic Finite Elements
656
Analysis of surface plasmon resonance data using a partial least square regression method for glucose concentration estimation
657
Analysis of surface plasmon resonance sensor coupled to periodic array of gold nanoparticles
658
Analysis of surface plasmon resonance with Goos-hanchen shift using FDTD method
659
Analysis of surface radiance composition for absorption bands in middle-infrared regions
660
Analysis of surface roughness and contact pressure at copper connector using nickel and silver plating for EV battery
661
Analysis of surface roughness and material removal rate in turning using Taguchi´s technique
662
Analysis of surface roughness and morphology of first-year sea ice melt ponds: implications for microwave scattering
663
Analysis of Surface Roughness Heterogeneity and Scattering Behavior for Radar Measurements
664
Analysis Of Surface Roughness On Semiconductor Laser Etched Facets
665
Analysis of surface roughness scattering and its contribution to conductivity degradation in nanoscale interconnects
666
Analysis of surface rupture caused by Wenchuan earthquake and reference to urban regional construction
667
Analysis of surface state effect on gate lag phenomena in GaAs MESFET´s
668
Analysis of Surface Sterilization and Properties of Medical Poly(tetrafluoroethylene) in Remote Argon Plasma
669
Analysis of surface strength in frequency domain using fore-aft distance information of wheeled robots on rough terrain
670
Analysis of surface structures of a metal target from multi-pulse KrF laser ablation
671
Analysis of Surface Wave Reflection from a Periodic Array of Grooves
672
Analysis of surface waves in microstrip array
673
Analysis of Surface Waves in Microstrip Array
674
Analysis of surface wind retrieval in coastal areas from SAR
675
Analysis of surface-based passive microwave observations during LEADEX 1992
676
Analysis of Surface-Emitted Terahertz-Wave Difference Frequency Generation in Slant-Stripe-Type MgO-Doped Periodically Poled Lithium Niobate
677
Analysis of surface-emitting lambda /4-shifted DFB lasers with a distributed Bragg reflector
678
Analysis of surface-emitting second-order distributed feedback lasers with central grating phaseshift
679
Analysis of surface-induced degradation of GaAs power MESFET´s
680
Analysis of surface-plasmon mode in photonic crystal fibers
681
Analysis of surface-related deep-trap effects on gate-lag phenomena in GaAs MESFETs
682
Analysis of surfaces creation methods in computer graphics tools
683
Analysis of surface-state and impact-ionization effects on breakdown characteristics and gate-lag phenomena in narrowly recessed gate GaAs FETs
684
Analysis of surface-state effects on gate-lag phenomena in recessed-gate and buried-gate GaAs MESFETs
685
Analysis of surface-wave excitation and radiation mechanisms of a monopole on a circular grounded dielectric slab with critical thickness
686
Analysis of surge and noise generation in a forward dc-to-dc converter
687
Analysis of Surge Capacitor Lead Connections for the Protection of Motors
688
Analysis of surge current due to closiing loop in distribution network
689
Analysis of surge protection performance in low-voltage AC systems with capacitive load
690
Analysis of Surge Voltage Distribution in a Model Transformer for Different Types of Surges with Turn Resolution and its Validation
691
Analysis of surges measured at 550 kV substations
692
Analysis of surrogate indicators for evidence of subsurface preferential flow pathways: impact of subsurface preferential flow on variability of NDVI
693
Analysis of surrounded antennas mounted on large and complex structures using a hybrid method
694
Analysis of surrounded antennas: From DG-FDTD to DG-FDTD/IPO
695
Analysis of Survival Data Having Time-Dependent Covariates
696
Analysis of suspended microstrip taper baluns
697
Analysis of suspended substrate stripline discontinuities using full-wave spectral domain approach
698
Analysis of sustainability balanced scorecard influences on decision processes and investment decisions
699
Analysis of sustainable and competitive energy system
700
Analysis of sustainable development ability for the listed SMEs in Guangdong province
701
Analysis of Sustainable Development of Family Enterprises
702
Analysis of sustainable public transportation system and its interaction with the grid
703
Analysis of sustainable urban transport in Libya
704
Analysis of sustained interarea oscillations in power systems using kinetic energy approach
705
Analysis of Sustained Maximal Grip Contractions using emperical mode decomposition
706
Analysis of Sustaining Waveforms for Improving Luminance and Luminous Efficacy in AC Plasma Display Panels
707
Analysis of SVC and TCSC controllers in voltage collapse
708
Analysis of SVC influence on the power quality for grid-connected PV plants
709
Analysis of Swarm Behavior of Users´ GPS Data Based on Boids Model
710
Analysis of swath bathymetry sonar accuracy
711
Analysis of swimming patterns of diving beetles incorporating robotics
712
Analysis of swinging angle hydraulic detection system of constant velocity universal joints based on MATLAB
713
Analysis of switch diversity combining over two wave with diffuse power fading
714
Analysis of switch failures in a self-structuring antenna system
715
Analysis of Switch Performance on the Mercury Pulsed-Power Generator
716
Analysis of switched and hybrid systems - beyond piecewise quadratic methods
717
Analysis of switched capacitive networks
718
Analysis of switched capacitor DC-DC step down converter
719
Analysis of switched diversity systems on generalized-fading channels
720
Analysis of switched diversity TCM-MPSK systems on Nakagami fading channels
721
Analysis of switched normal discrete-time systems
722
Analysis of switched normal switching systems with disturbance
723
Analysis of switched reluctance drives by the finite element time-stepping method
724
Analysis of switched reluctance machine using FEA for renewable energy system
725
Analysis of switched reluctance motor drive under fault conditions
726
Analysis of switched reluctance motor efficiency under different speed control strategies
727
Analysis of switched-capacitor and switched-current networks with complete settling assumption
728
Analysis of switched-capacitor common-mode feedback circuit
729
Analysis of Switched-capacitor DC-DC Converters in Soft-charging Operation
730
Analysis of switched-capacitor network in the frequency domain using continuous-time
N
-port equivalents
731
Analysis of switched-capacitor network with nonideal op amps using analog circuit simulation program
732
Analysis of switched-capacitor networks — An overview
733
Analysis of switched-capacitor networks (SCN) based on capacitor - switch macromodels
734
Analysis of switched-capacitor networks containing operational amplifiers with finite DC gain and gain-bandwidth product values
735
Analysis of switched-capacitor networks in the frequency domain using continuous-time two-port equivalents
736
Analysis of switched-capacitor networks using general- purpose circuit simulation programs
737
Analysis of switching activity in DSP signals in the presence of noise
738
Analysis of switching behavior of the power insulated gate bipolar transistor by soft modeling
739
Analysis of switching characteristics of the digital hybrid PLL frequency synthesizer
740
Analysis of Switching Circuits Through Incorporation of a Generalized Diode Reverse Recovery Model Into State Plane Analysis
741
Analysis of Switching Control Channels in Ason
742
Analysis of switching converters with type 3 compensator using ripple-based control
743
Analysis of switching DC-DC converters using a grid-point approach
744
Analysis of switching dynamics with competing support vector machines
745
Analysis of switching dynamics with competing support vector machines
746
Analysis of switching effects in DC-DC converters via bias point computation
747
Analysis of Switching Effects of Vacuum Circuit Breaker on Dry-Type Foil-Winding Transformers Validated by Experiments
748
Analysis of Switching Ferrite Cores as Circuit Elements
749
Analysis of switching ferrite cores as circuit elements
750
Analysis of switching frequency modulated synchronous buck converters
751
Analysis of switching frequency reduction methods applied to sliding mode controlled DC-DC converters
752
Analysis of switching in a DC circuit
753
Analysis of switching in an AC hybrid contactor
754
Analysis of switching in uniformly magnetized bodies
755
Analysis of switching in uniformly magnetized bodies
756
Analysis of switching loads in networks using operational matrices
757
Analysis of switching loss of an AC fed direct converter for a switched reluctance machine
758
Analysis of switching network in PWM DC-DC converters in terms of averaged resistance and conductance
759
Analysis of switching noise for an output driver circuit in an application
760
Analysis of switching over-voltages in a three-ended 400 kV cable system
761
Analysis of switching power converter by using a switching matrix approach
762
Analysis of switching properties of different high voltage IGBTs operating under hard-switching conditions
763
Analysis of switching regulators by phase portrait technique
764
Analysis of switching surge characteristics of 345kV GIS and their affections assessments
765
Analysis of switching surges on a 220-kv line
766
Analysis of switching system software for reliability
767
Analysis of switching transient overvoltages and protection techniques for the energization of the connected 115 kv underground and submarine cables
768
Analysis of switching transients in domestic installations with grid-tied microgeneration
769
Analysis of switching windows in a gain-transparent-SLALOM configuration
770
Analysis of switching-invariant characteristics of soft-switching cells
771
Analysis of Switching-Loss-Reduction Methods for MHz-Switching Buck Converters
772
Analysis of Switch-Level Faults by Symbolic Simulation
773
Analysis of syllable duration models for Mandarin speech
774
Analysis of symbol error rate for amplify-and-forward networks with best-relay selection over Weibull fading channels
775
Analysis of Symbol Error Rates for Signal Space Diversity in Rayleigh Fading Channels
776
Analysis of symbol mapping based on BICM-ID for FM IBOC
777
Analysis of Symbol Mapping for Bit-Interleaved Coded Modulation with Iterative Decoding
778
Analysis of symbol-design strategies for intrapulse radar-embedded communications
779
Analysis of Symbolic Deduction Based Scheduling Algorithm for the Production Scheduling Problem Under Time Uncertainty
780
Analysis of Symmetric 12-Pole Properties
781
Analysis of symmetric and asymmetric broadened-mode laser structures for short and ultrashort optical pulse generation
782
Analysis of Symmetric and Asymmetric Coupled Suspended Striplines and Some Associated Discontinuities
783
Analysis of symmetric high-k spacer (SHS) trigate Wavy FinFET: A novel device
784
Analysis of symmetric local graph structure (SLGS) for face recognition with various thresholds
785
Analysis of symmetric nonexhaustive polling with multiple servers
786
Analysis of symmetric Y-junction laser arrays with uniform near-field distribution
787
Analysis of symmetrical and asymmetrical fin-line structures using the integral equation technique
788
Analysis of symmetrical components in time-domain
789
Analysis of symmetrical pulse width modulation strategies for matrix converters
790
Analysis of symmetrical six-port junction when configured as a six-port reflectometer
791
Analysis of symmetric-varactor-frequency triplers
792
Analysis of sympathetic activity induced by stimulation
793
Analysis of Sympathetic Inrush Phenomena in Transformers Using Coupled Field-Circuit Approach
794
Analysis of sympathetic inrush using network analysis approach in initial period of power symtem restoration
795
Analysis of sympathetic nerve activity by power spectrum of arterial pressure fluctuations: effects of salt-induced hypertension and calcium supplementation in rats
796
Analysis of sympathovagal balance in patients with major depressive disorder using wavelet packet transform
797
Analysis of synaptic quantal depolarizations in smooth muscle using the wavelet transform
798
Analysis of synchronization algorithms with time-out control over networks with exponentially symmetric delays
799
Analysis of synchronization and stability of FHN models
800
Analysis of synchronization for Coupled Hybrid Systems
801
Analysis of synchronization issues for live video-context transmission service
802
Analysis of synchronization of chaotic systems based on local conditional Lyapunov exponents
803
Analysis of synchronization performance in redundant networks for substation automation
804
Analysis of synchronization phenomena in human electroencephalograms with nonlinear excitable media
805
Analysis of synchronization phenomena in star-coupled Wien-bridge oscillators using distorted waves
806
Analysis of synchronization phenomena of two metronomes on a cart using describing function approach
807
Analysis of synchronization phenomenon in coupled oscillator chains
808
Analysis of Synchronizer, Data Loss and Occurrence of Metastability
809
Analysis of synchronizing methods for wireless telecommunication network
810
Analysis of Synchronizing Systems for Dot-Interlaced Color Television
811
Analysis of synchronous and asynchronous traffic in an FDDI network
812
Analysis of synchronous and stationary reference frame control strategies to fulfill LVRT requirements in Wind Energy Conversion Systems
813
Analysis of Synchronous Digital-Modulation Schemes for Satellite Communication
814
Analysis of synchronous generator end-winding deformations using 3-D time-harmonic FEM
815
Analysis of Synchronous Generator Internal Faults Based on Fractal
816
Analysis of synchronous generator internal insulation failures
817
Analysis of synchronous generator sequential short circuits
818
Analysis of synchronous generator stability in case of separate and self-excitation system
819
Analysis of synchronous intensity modulation control of 40 Gbit/s dispersion-managed soliton transmissions
820
Analysis of Synchronous Machine Short Circuits
821
Analysis of synchronous machine transient tests using a minicomputer
822
Analysis of synchronous machines connected to power-system networks
823
Analysis of Synchronous Machines under Unbalanced Operation
824
Analysis of synchronous machines with composite stator cores
825
Analysis of synchronous phenomena in a chaotic spiking oscillator with a periodic pulse-train input
826
Analysis of synchronous reluctance machine with magnetically coupled three-phase windings and reactive power compensation
827
Analysis of Synchronous Reluctance Motor using Equivalent Magnet Circuit considering Skew and Flux Density Harmonics Contents
828
Analysis of synchronous reluctance motor using FEM coupled electromagnetic field of Preisach model & thermal field
829
Analysis of Synchronous Surface Acoustic Wave Generation Phenomena
830
Analysis of synchrony of a handshake between humans
831
Analysis of synergistic and antagonistic effects of TCM: Cases on diabetes and insomnia
832
Analysis of Synergy Marketing in Supply Chain Based on Game Theory
833
Analysis of Synonymous Codon Usage in the Capsid Gene UL38 of Duck Enteritis Virus
834
Analysis of synonymous codon usage in the Cas1 gene of Riemerella anatipestifer
835
Analysis of synonymous codon usage in the mfs_1 gene of Riemerella anatipestifer
836
Analysis of synonymous codon usage in the outer membrane efflux protein gene of Riemerella anatipestifer
837
Analysis of Synonymous Codon Usage in the UL26.5 Gene of Duck Enteritis Virus
838
Analysis of synonymous codon usage in the UL41 gene of duck plague virus
839
Analysis of synonymous codon usage on the small subunit of ribonucleotide reductase gene from duck plague virus
840
Analysis of syntactic elements and structure of web pages using eye-tracking technology
841
Analysis of syntactic patterns for identification of features from unstructured reviews
842
Analysis of synthetic aperture radar data acquired over a variety of land cover
843
Analysis Of Synthetic Aperture Radar Data For The Study Of Deciduous Forest
844
Analysis of synthetic cylindrical array beam-forming in presence of the elements position-error for semi-anechoic chamber evaluation
845
Analysis of synthetic document images
846
Analysis of synthetic metabolic pathways solution space
847
Analysis of Synthetic Quartz for Stringent Frequency Versus Temperature Applications
848
Analysis of system and process based quality management system and evaluation model
849
Analysis of System Archetype on Enterprise Training in China
850
Analysis of System Architecture of FPGA-based Embedded Controller for Magnetically Suspended Rotor
851
Analysis of system bus on SoC platform using TSV interconnection
852
Analysis of system concepts for bi- and multi-static SAR missions
853
Analysis of system connection in multilateral control system considering number of subsystems
854
Analysis of system control unmanned aerial vehicle
855
Analysis of system dynamics after saddle-node bifurcations for general nonlinear systems with unmodelled dynamics
856
Analysis of system frame synchronization on a FH-BFSK system performance for mobile radio applications
857
Analysis of System Identification Using the Neural Extended Kalman Filter
858
Analysis of System Imperfections in a Photonics-Assisted Instantaneous Frequency Measurement Receiver Based on a Dual-Sideband Suppressed-Carrier Modulation
859
Analysis of system operation state influence on the optimal location of voltage sag monitors by applying tabu search
860
Analysis of system oscillations using wide-area measurements
861
Analysis of system outage induced by second order PMD in the presence of chromatic dispersion
862
Analysis of system overhead on parallel computers
863
Analysis of system parameters for LEO/ICO-satellite communication networks
864
Analysis of System Parameters of a Six-Port Communications Receiver with Analog I/Q Regeneration
865
Analysis of system performance by changing the ring architecture on the dual ring CC-NUMA system
866
Analysis of system performance for differentiated handling of SIP requests
867
Analysis of system performance for robotic spray forming process
868
Analysis of system performance of high-capacity mobile radio
869
Analysis of system reconfigurability using generic component models
870
Analysis of system reliability by Logical Differential Calculus and Decision Diagrams
871
Analysis of System Reliability for Cache Coherence Scheme in Multi-processor
872
Analysis of system reliability with dependent repair modes
873
Analysis of system structure around degenerate critical points
874
Analysis of system time performance in BeiDou satellite navigation system
875
Analysis of system with pure time-delay using computer algebra systems
876
Analysis of systematic errors of frequency and damping estimation by interpolated DFT BY1 algorithm
877
Analysis of system-dependent factors affecting pixelated CdZnTe detector performance through simulation
878
Analysis of System-Failure Rate Caused by Soft-Errors using a UML-Based Systematic Methodology in an SoC
879
Analysis of systemic behavior of circulatory system: theoretical study by electrical circuit model
880
Analysis of systemic circulation by a time varying capacitance model of ventricle linked to electrical circuit of arterial tree
881
Analysis of system-inherent oscillations in power systems with several load models
882
Analysis of system-level electromagnetic interference from electronic packages and boards
883
Analysis of System-Level Reliability Factors and Implications on Real-Time Monitoring Methods for Oxide Breakdown Device Failures
884
Analysis of systems subject to parameter uncertainties: application of interval analysis
885
Analysis of systems switched with alternating polarity
886
Analysis of systems with combined time invariant/time varying structured uncertainty
887
Analysis of Systems with Element-by-Element Bounded Uncertainties
888
Analysis of systems with known transmission-frequency characteristics by Fourier integrals
889
Analysis of systems with saturation/deadzone via piecewise-quadratic Lyapunov functions
890
Analysis of systems with variable parametric uncertainty using fuzzy functions
891
Analysis of T cell receptor V beta diversity in peripheral CD8(+) T lymphocytes in patients with hepatitis B infection
892
Analysis of T wave complexity during arrhythmic phases caused by hemodialysis
893
Analysis of T wave morphology parameters with signal averaging during ischemia induced by percutaneous transluminal coronary angioplasty
894
Analysis of T
0
in 1.3 μm multi-quantum well and bulk active lasers
895
Analysis of TAB inner lead fatigue in thermal cycle environments
896
Analysis of TAB inner lead fatigue in thermal cycle environments
897
Analysis of tabular methods for modular reduction
898
Analysis of tacit knowledge sharing and codification in higher education
899
Analysis of Tactical Communications Jamming Problems
900
Analysis of tactile imprints for multi-fingered robot hands
901
Analysis of Taekwondo tournament logistics demand and study on the theoretical framework
902
Analysis of tagging variants of Sequenced Tagged Captcha (STC)
903
Analysis of Tags as a Social Network
904
Analysis of Taiwan power system dynamic performance and coherency identification of synchronous generators using fuzzy c-means clustering
905
Analysis of Taiwan residential districts power sources by using hydrogen fuel cells
906
Analysis of Tamil character writings and identification of writer using Support Vector Machine
907
Analysis of tandem cold reduction mill with automatic gauge control
908
Analysis of tandem III–V/SiGe devices grown on Si
909
Analysis of TanDEM-X InSAR data aimed at the characterisation of vegetation vertical structure: A case study in injune (Queensland, Australia)
910
Analysis of tangent oval radome based on Matlab
911
Analysis of tanks using prallel method of moments code and out-of-core solvers
912
Analysis of TANOS Memory Cells With Sealing Oxide Containing Blocking Dielectric
913
Analysis of Tap Weight Errors in CCD Transversal Filters
914
Analysis of tap-changer dynamics and construction of voltage stability regions
915
Analysis of tap-changer dynamics and construction of voltage stability regions
916
Analysis of tape surface roughness by magnetic recording and mechanical methods
917
Analysis of tapered column plasma using full wave simulator
918
Analysis of Tapered IDG Antennas in Finite Ground Planes
919
Analysis of tapered micostrip patch antenna by the Wave Concept Iterative Procedure
920
Analysis of tapered microstrips on lossy dielectric substrates
921
Analysis of Tap-Induced Oscillations Observed in an Electrical Distribution System
922
Analysis of tapped delay line processing for adaptive sidelobe cancellation
923
Analysis of tapped inductor converters in three operating modes for photovoltaic systems with grounded source
924
Analysis of tapped-in coupling between combline resonators applicable in wideband filter designs
925
Analysis of tapped-inductor inverters as low-power fluorescent lamp ballasts supplied from a very low input voltage
926
Analysis of Target Detection Probability in Randomly Deployed Sensor Networks
927
Analysis of target detection via matrix completion
928
Analysis of Target Loss Due to Suppressing SAR Jamming Using Dual-channel Cancellation
929
Analysis of target response of FM-CW radar
930
Analysis of target responses and clutter based on measurements at test facility for landmine detection systems located at TNO-FEL
931
Analysis of target velocity and position estimation via doppler-shift measurements
932
Analysis of Target-Speed Determination with Doppler Radar
933
Analysis of task assignment policies in scalable distributed web-server systems
934
Analysis of task assignment with cycle stealing under central queue
935
Analysis of task effort estimation accuracy based on use case point size
936
Analysis of task feasibility for a home robot using prismatic joints
937
Analysis of task morphologies for networking behavioral skills via virtual reality
938
Analysis of Task Switching Time of ECU Embedded System ported to OSEK(RTOS)
939
Analysis of task-based gestures in human-robot interaction
940
Analysis of Tasks Reallocation in a Dedicated Grid Environment
941
Analysis of Taxi Conformance Monitoring Algorithms and Performance
942
Analysis of Taylor-Kuznetsov memory using one-step majority logic decoder
943
Analysis of TCM performance on Rayleigh channels using pilot symbol aided transmission
944
Analysis of TCM syndrome characteristic of 303 patients with stable angina in GuangDong Province
945
Analysis of TCP and DTN Retransmission Algorithms in Presence of Channel Disruptions
946
Analysis of TCP BIC Congestion Control Implementation
947
Analysis of TCP congestion control using a fluid model
948
Analysis of TCP flags in congested network
949
Analysis of TCP flow control for high speed networks: Case of two nodes in tandem
950
Analysis of TCP flow data for traffic anomaly and scan detection
951
Analysis of TCP latency over wireless links supporting FEC/ARQ-SR for error recovery
952
Analysis of TCP over optical burst-switched networks with burst retransmission
953
Analysis of TCP performance on ad hoc networks using preemptive maintenance routing
954
Analysis of TCP performance over hybrid "fast fixed-to-slow wireless" buffered links
955
Analysis of TCP Performance over Mobile Ad Hoc Networks with Varying Speed
956
Analysis of TCP performance over the PBB-TE during the protection switchover time
957
Analysis of TCP performance under joint rate and power adaptation in cellular WCDMA networks
958
Analysis of TCP SYN traffic: an empirical study
959
Analysis of TCP throughput in cognitive radio networks
960
Analysis of TCP throughput in IEEE 802.11 based multi-hop ad hoc networks
961
Analysis of TCP transient behavior and its effect on file transfer latency
962
Analysis of TCP under Wireless Circumstances: A Performance Evaluation
963
Analysis of TCP Vegas and TCP Reno
964
Analysis of TCP with an Exponential-RED (E-RED) queue management policy with two delays
965
Analysis of TCP with several bottleneck nodes
966
Analysis of TCP/IP for high performance parallel implementations
967
Analysis of TCP-Reno and TCP-Vegas over AOMDV routing protocol for mobile ad hoc network
968
Analysis of TCPS-SMES coordination in a multi area thermal system with Automatic Generation Control
969
Analysis of TCR as a reactive power compensator
970
Analysis of TCSC providing damping in the interconnection Colombia-Ecuador 230 kV
971
Analysis of TDD Cellular Interference Mitigation Using Busy-Bursts
972
Analysis of TDMA crossbar real-time switch design for AFDX networks
973
Analysis of T-DMB Ensemble Transport Signal for Mobile Video Services
974
Analysis of TDOA and TDOA/SS based geolocation techniques in a non-line-of-sight environment
975
Analysis of TE and TM modes in DFB lasers by two-dimensional theory
976
Analysis of TE scattering from dielectric cylinders using a multifilament magnetic current model
977
Analysis of TE/TM mode selectivity in DFB lasers with a phase-shift region
978
Analysis of teaching methodologies for electronics in non-specialized engineering studies
979
Analysis of Team Characteristics of Project-Based Learning Based on Performance Factors of Collaborative Learning
980
Analysis of technical capabilities of multichannel MMW radiometric sensors creation
981
Analysis of Technical Conditions for Sharing Frequency Spectrum
982
Analysis of Technical Innovation Capability for Eight Economic Regions in China
983
Analysis of technical losses in distribution networks of large cities in underdeveloped African countries. (case of the City of Kinshasa / Dem. Rep. of Congo)
984
Analysis of Technical Progress on Output of Coal Enterprises
985
Analysis of technical strategies towards a low carbon electricity system in Europe
986
Analysis of technique and management requirements in cloud computing process
987
Analysis of techniques for accelerating IPTV channel change
988
Analysis of techniques for building intrusion tolerant server systems
989
Analysis of techniques for processing parallel signal outputs
990
Analysis of techniques for the reduction of jitter caused by SONET pointer adjustments
991
Analysis of Techniques for Visualizing Security Risks and Threats
992
Analysis of techniques to minimise the interference effects of metallic control lines on reconfigurable microstrip antennas
993
Analysis of technological concerns on electrical characteristics of SOI power LUDMOS transistors
994
Analysis of technological errors at production of rectangular resonance microstrip antenna
995
Analysis of technological factors´s influence on solar cell´s performance by PC1D simulation
996
Analysis of technological learning for China´s manufacturing industry
997
Analysis of technological path-creation of new strategic industry by evolutionary game theory
998
Analysis of Technologies in 3G and 3.5G Mobile Networks
999
Analysis of technology and economy of new generation smart substation
1000
Analysis of technology innovation diffusion effect in regional innovation system by unascertained measurement
