بر اساس عنوان

1
Improving the Energy Balance of Field-Based Routing in Wireless Sensor Networks
2
Improving the Energy Benefit for 802.3az Using Dynamic Coalescing Techniques
3
Improving the energy consumption in mobile phones by filtering noisy GPS fixes with modified Kalman filters
4
Improving the energy efficiency in multicast routing for mobile adhoc networks
5
Improving the Energy Efficiency of a Clock Synchronization Protocol for WSNs Using a TDMA-Based MAC Protocol
6
Improving the energy efficiency of autonomous underwater vehicles by learning to model disturbances
7
Improving the energy efficiency of Big Cores
8
Improving the Energy Efficiency of CDMA Power Control over Frequency-Selective Channels
9
Improving the energy efficiency of contention-based synchronization of (O)FDMA networks
10
Improving the energy efficiency of hardware-assisted watchpoint systems
11
Improving the Energy Efficiency of Pipelined Delay Lines Through Adaptive Granularity
12
Improving the energy efficiency of street lighting. A case in the South of Spain
13
Improving the Energy Efficiency of Two-Tier Heterogeneous Cellular Networks through Partial Spectrum Reuse
14
Improving the energy efficiency of WSN by using application-layer topologies to constrain RPL-defined routing trees
15
Improving the energy resolution of high-pressure Xe cylindrical ionization chambers
16
Improving the energy/power constraint for technology optimization
17
Improving the energy-efficiency of dense LTE networks by adaptive activation of cells
18
Improving the Energy-Efficiency of GPS Based Location Sensing Smartphone Applications
19
Improving the engineer´s image
20
Improving the engineered communication: studying the influence of written documents on their contexts
21
Improving the engineering of model tracing based intelligent program diagnosis
22
Improving the Enrollment in Dynamic Signature Verfication with Synthetic Samples
23
Improving the environment
24
Improving the equal-spacing design in IEEE 802.11e HCCA wireless networks
25
Improving the erasure recovery performance of short codes for opportunistic spectrum access
26
Improving the Ergodic Capacity of Wireless Networks Using Opportunistic Relays
27
Improving the Erlang capacity of a CDMA cellular network under bursty user mobility
28
Improving the error backpropagation algorithm with a modified error function
29
Improving the error correction capability of arithmetic coding by forecasting forbidden symbols
30
Improving the error detection ability of concurrent checkers by observation point insertion in the circuit under check
31
Improving the Error Rate Performance of Turbo Codes using the Forced Symbol Method
32
Improving the ESD failure threshold of silicided n-MOS output transistors by ensuring uniform current flow
33
Improving the ESD self-protection capability of integrated power NLDMOS arrays
34
Improving the estimation of biological indices via Kalman filtering
35
Improving the estimation of head pose orientation: By using eyeglasses as a key feature
36
Improving the Estimation of Residual Delay based Forwarding Method in Opportunistic Vehicular Networks
37
Improving the evaluation of cell deformability by different channel width in a microfluidic device
38
Improving the evaluation of concept maps: a step-by-step analysis
39
Improving the evaluation of electric power systems class students through BLS-based assessments
40
Improving the evaluation of generator matrix G by initial upper bound estimation
41
Improving the evaluation of programming courses
42
Improving the Evaluation Performance of Space-Time Trellis Code through Visualisation
43
Improving the evidence combination formulas of D-S Evidential Theory in medical information fusing
44
Improving the evolutionary architecting process for embedded system product lines
45
Improving the Exchange of Requirements and Specifications between Business Partners
46
Improving the execution of groups of simulations on a cluster of workstations and its application to storage area networks
47
Improving the Expected Quality of Experience in Cloud-Enabled Wireless Access Networks
48
Improving the explanatory power of knowledge-based systems: an investigation of content and interface-based enhancements
49
Improving the exponential decay rate by back and forth iterations of the feedback in time
50
Improving the expressiveness of mobile robots
51
Improving the extraction of temporal motion strength signals from video recordings of neonatal seizures
52
Improving the extrapolation capability of neural networks
53
Improving the eyes localization algorithm for face recognition systems
54
Improving the Face Recognition Grand Challenge Baseline Performance using Color Configurations Across Color Spaces
55
Improving the failure detection in the lightning impulse test of low inductance air core reactors
56
Improving the fairness of distributed-queue-dual-bus networks
57
Improving the fairness of FAST TCP to new flows
58
Improving the fairness of TCP over ATM WAN with the age priority packet discarding scheme
59
Improving the fairness of timely refresh of web views
60
Improving the fault behavior of wind farms facing wind speed changes using STATCOM
61
Improving the Fault Resilience of Overlay Multicast for Media Streaming
62
Improving the Fault Resilience of Overlay Multicast for Media Streaming
63
Improving the fault tolerance of grid-connected synchronous generators through electromagnetic design
64
Improving the fault tolerance of GSM networks
65
Improving the Fault Tolerance of Nanometric PLA Designs
66
Improving the Fault-Tolerance for Controllers´ Negotiation Model under Multi-domain SDN Environments
67
Improving the Fault-Tolerant Scheme Based on the RSA System
68
Improving the fetal cardiotocographic monitoring by advanced signal processing
69
Improving the fidelity of contextual data layouts using a Generalized Barycentric Coordinates framework
70
Improving the field distribution for stator bar of high voltage electric machine
71
Improving the field emission property of zinc oxide by directly growing on graphene layer
72
Improving the field of view for the next generation of US Army Black Hawk helicopters
73
Improving the filter bank of a classic speech feature extraction algorithm
74
Improving the filtering performance of the BDND algorithm in impulse noise removal
75
Improving the filtering tolerance of 42.7-Gb/s partial-DPSK by optimized power imbalance
76
Improving the financial crisis on the accounting standards implications
77
Improving the finite-length performance of long SC-LDPC code chains by connecting consecutive chains
78
Improving the firing mechanisms in thyristors for lighting applications
79
Improving the First-Miss Computation in Set-Associative Instruction Caches
80
Improving the fit of locally weighted regression models
81
Improving the Fitness of High-Dimensional Biomechanical Models via Data-Driven Stochastic Exploration
82
Improving the Fixed-Line Access Security for IMS
83
Improving the FLAIR Model by Incorporating Multiple Scattering-Partial Validation
84
Improving the flare performance of turbo codes using error detection and event flipping
85
Improving the flexibility of RNA-Seq data analysis pipelines
86
Improving the flow [resource optimisation in logistics]
87
Improving the focusing properties of SAR processors for wide-band and wide-beam low frequency imaging
88
Improving the formal concept analysis algorithm to construct domain ontology
89
Improving the formation-keeping performance of multiple autonomous underwater robotic vehicles
90
Improving the forward current of P-N diode using soft X-ray annealing method
91
Improving the forward solver for the complete electrode model in EIT using algebraic multigrid
92
Improving the FPGA design process through determining and applying logical-to-physical design mappings
93
Improving the frame-error-rate of spatial multiplexing in block fading by randomly rotating the signal constellation
94
Improving the Frequency Characteristics of RF Standard Magnetic-Field Generator Employing Loop Antenna
95
Improving the frequency characteristics of the electronically steerable passive array radiator antenna
96
Improving the frequency response of ceramic dielectrics for high power applications in power electronic converters
97
Improving the frequency stability and phase noise of opto-electronic oscillators by harmonic feedback
98
Improving the full-bridge phase-shift ZVT converter for failure-free operation under extreme conditions in welding and similar applications
99
Improving the function of dopamine electrodes with novel carbon materials
100
Improving the functioning of a transformer less inverter equipping a photovoltaic generator
101
Improving the gain and reducing the side lobe levels of a microstrip/dielectric resonator millimeter-wave antenna
102
Improving the Gait Performance of Nonfluid-Based Swing-Phase Control Mechanisms in Transfemoral Prostheses
103
Improving the gas sensing performance of chemiresistors by LED irradiation
104
Improving the gas sensing response of polyaniline via a porous carbon nanotube-based template
105
Improving the gate oxide integrity of very high voltage MCT and IGBT devices by external gettering of metal impurities
106
Improving the Gaussian Sum Particle filtering by MMSE constraint
107
Improving the GDG and GVD Tolerance of 42.7Gb/s Partial-DPSK by Optimized Power Imbalance
108
Improving the generalisation of the N-tuple classifier using the effective VC dimension
109
Improving the generality of the fictitious magnetic charge approach to computing inductances in the presence of permeable materials
110
Improving the generalization ability of neural networks by interval arithmetic
111
Improving the generalization capability of the binary CMAC
112
Improving the Generalization Capacity of Cascade Classifiers
113
Improving the Generalization Properties of Neural Networks: an Application to Vehicle Detection
114
Improving the generalized likelihood ratio test for unknown linear Gaussian channels
115
Improving the Generalized Password-Based Authenticated Key Agreement Protocol
116
Improving the genetic algorithm performance in aerial spray deposition management
117
Improving the genetic-algorithm-optimized wavelet neural network for stock market prediction
118
Improving the geocoding of persistent scatterers at facades using lattice topology information
119
Improving the geometry of a microstrip antenna for UWB signals through FDTD-CPML method and construction with fiberglass FR4
120
Improving the Gilbert-Varshamov bound for q-ary codes
121
Improving the Global Information Grid´s Performance through Satellite Communications Layer Enhancements
122
Improving the Graceful-Degradation Performance of Combined Power Amplifiers
123
Improving the grain quality assessment fusing data from image and spectra analyses
124
Improving the graph grammar parser of Rekers and Schurr
125
Improving the Graph-Based Image Segmentation Method
126
Improving the Grid Operation and Reliability Cost of Distribution Systems With Dispersed Generation
127
Improving the grid power quality using virtual synchronous machines
128
Improving the GridRPC model with data persistence and redistribution
129
Improving the Hamming binary associative memory
130
Improving the handover performance for mixed cell system
131
Improving the handsets network test process via DMAIC concepts
132
Improving the hardware utilization efficiency of partially parallel LDPC decoder with scheduling and sub-matrix decomposition
133
Improving the HDTV picture performance under noisy transmission conditions
134
Improving the health care and public health critical infrastructure
135
Improving the helical antenna performance by changing the pitch angle and the shape of reflector
136
Improving the high frequency performance of SiGe HBT with new lateral structure and process
137
Improving the high-frequency attenuation of shunt capacitor, low-pass filters
138
Improving the High-Frequency Performance of Coaxial-to-Microstrip Transitions
139
Improving the high-frequency performance of integrated EMI filter with multiple ground layers
140
Improving the high-frequency response of the folded-cascode amplifiers
141
Improving the high-voltage quality of alumina insulators in vacuum by surface doping
142
Improving the homogeneity of the magnetic field in the magnetic search coil technique
143
Improving the Hopfield network through beam search
144
Improving the Human–Robot Interface Through Adaptive Multispace Transformation
145
Improving the human-robot interaction through emotive movements A special case: Walking
146
Improving the humidity resistance of electronic packaging materials by micro-nano hierarchical structured silica
147
Improving the hybrid electric vehicles efficiency, using Si0.7Ge0.3 and Bi2Te3 thermoelectric materials
148
Improving the I/O Performance in the Reduce Phase of Hadoop
149
Improving the I/O performance of real-time database systems with multiple-disk storage structures
150
Improving the Identification of Business Components: A Framework Based on Knowledge Management of Process Illustrating
151
Improving the IEC table for transformer failure diagnosis with knowledge extraction from neural networks
152
Improving the IEEE 802.11 MAC Layer Handoff Latency to Support Multimedia Traffic
153
Improving the illumination sensitivity of optical pattern recognition systems using nonlinear techniques in the Fourier domain
154
Improving the image of the electron microscopist
155
Improving the image quality of block-based video coders by exploiting interblock redundancy
156
Improving the image quality of spaceborne multiple-aperture SAR under minimization of sidelobe clutter and noise
157
Improving the image quality of spectral CT volume rendering
158
Improving the image recognition capability of Hopfield neural networks
159
Improving the image reconstruction in Electrical Impedance Tomography (EIT) with block matrix-based Multiple Regularization (BMMR): A practical phantom study
160
Improving the images of an acoustical hologram
161
Improving the immunity of automotive ICs by controlling RF substrate coupling
162
Improving the immunity of smart power integrated circuits by controlling RF substrate coupling
163
Improving the immunity to substrate noise using active noise cancellation circuit in mixed-signal integrated circuits
164
Improving the impact energy by using auxiliary electrode in a cylindrical bore
165
Improving the impact reliability of the Ni-doped solder joint by applying Cu-Zn under bump metallization
166
Improving the Impedance Matching in Photonic Crystal Waveguides
167
Improving the implementation of access control in EMR
168
Improving the implementation of clinical decision support systems
169
Improving the index structure with hierarchical techniques in time-series databases
170
Improving the information security audit of enterprise using XML technologies
171
Improving the Information Security Management: An Industrial Study in the Privacy of Electronic Patient Records
172
Improving the informativeness of verbose queries using summarization techniques for spoken document retrieval
173
Improving the Initial Code Acquisition in Asynchronous Band-Limited Spread-Spectrum Systems
174
Improving the initial convergence of adaptive filters: variable-length LMS algorithms
175
Improving the initial response process in urban emergencies
176
Improving the initialisation and reliability of the Self Organising Oscillator Network
177
Improving the input characteristics of a circularly polarized proximity-fed microstrip antenna with polarization switching ability
178
Improving the input-queueing switch under bursty traffic
179
Improving the instantaneous writing speed to hard disk by alternately buffering
180
Improving the insulation condition of power transformers with an innovative paper insulation demoisturing procedure
181
Improving the integral equation of the hybrid FEM-RBCI method
182
Improving the integration of renewable sources in the European electricity networks
183
Improving the Integration of the Software Supply Chain via the Semantic Web
184
Improving the Integration of Wind Power Generation Into AC Microgrids Using Flywheel Energy Storage
185
Improving the integration process of large software systems
186
Improving the intellectual capital statement by following a technology driven strategic knowledge management approach
187
Improving the intelligibility of dysarthric speech by modifying system parameters, retaining speaker´s identity
188
Improving the Intercalibration of \\sigma ^{0} Values for the Jason-1 and Jason-2 Altimeters
189
Improving the interface between business and product development using agile practices and the cycles of control framework
190
Improving the interface performance of synthesized structural FAME simulators through scheduling
191
Improving the interference temperature estimation for Dynamic Spectrum Access in cognitive radios
192
Improving the interleaved signature instruction stream technique
193
Improving the internet protocol-based authentication process in a cooperative beyond third-generation network
194
Improving the Interoperability between Web Services and CORBA Using Pontifexv A Generic Bridge Generator
195
Improving the interoperability of healthcare information systems through HL7 CDA and CCD standards
196
Improving the interpretability of deep neural networks with stimulated learning
197
Improving the interpretability of Takagi-Sugeno fuzzy model by using linguistic modifiers and a multiple objective learning scheme
198
Improving the interpretability of TSK fuzzy models by combining global learning and local learning
199
Improving the interpretation of thermal images with the aid of emissivity´s angular dependency
200
Improving the intrinsic spatial resolution performance of the continuous miniature crystal element (cMiCE) detector
201
Improving the ionospheric specification in the Global Ionosphere Thermosphere Model
202
Improving the IP routing table update using clusetring technique
203
Improving the Isolation of 3-dB Couplers in Microstrip-Slotline Technique
204
Improving the isolation of GPS receivers for integration with wireless communication systems
205
Improving the isolation of GPS receivers for integration with wireless communication systems
206
Improving the iteration bound of finite state machines
207
Improving the iterative power of resynthesis
208
Improving the jam resistance performance of UWB impulse radio independently of time hopping codes
209
Improving the Jiles-Atherton model by introducing a full dynamic dependence of parameters
210
Improving the key extraction performance of a simultaneous local key and chord estimation system
211
Improving the kinematic performance of the SCARA-Tau PKM
212
Improving the K-means algorithm using improved downhill simplex search
213
Improving the k-NN and applying it to Chinese text classification
214
Improving the k-svd facial image compression using a linear deblocking method
215
Improving the Kuo-Lu-Yeh Algorithm for Assessing Two-Terminal Reliability
216
Improving the labeling processes of an Argentine winery by reducing time to shipment
217
Improving the laboratory environment by switching to embedded online labs
218
Improving the Laboratory Learning Experience: A Process to Train and Manage Teaching Assistants
219
Improving the Lagrangian relaxation approach for large job-shop scheduling
220
Improving the landing precision of an MSL-class vehicle
221
Improving the language of influence
222
Improving the large signal gain of dynamic linearizing modulator controlled boost converter
223
Improving the large-signal models of bipolar transistors by dividing the intrinsic base into two lateral sections
224
Improving the Latency of VMExit Forwarding in Recursive Virtualization for the x86 Architecture
225
Improving the LEACH protocol for wireless sensor networks
226
Improving the LEACH protocol on Wireless sensor network
227
Improving the Learning Accuracy of Fuzzy Decision Trees by Direct Back Propagation
228
Improving the learning experience for the deaf through augment reality innovations
229
Improving the learning experience of power system protection students using computer-based simulations and practical experiments
230
Improving the learning of physics concepts by using haptic devices
231
Improving the learning rate by inducing a transition model
232
Improving the learning rate of back-propagation with the gradient reuse algorithm
233
Improving the learning speed of 2-layer neural networks by choosing initial values of the adaptive weights
234
Improving the Level of Information Resources, Promoting Economic Growth, Dealing with the Financial Crisis
235
Improving the life cycle management of power transformers transforming data to life
236
Improving the Lifetime of Non-penetrable Barrier Coverage in Sensor Networks
237
Improving the light load efficiency and THD of PFC converters using a Line Cycle Skipping method
238
Improving the lighting, acoustics and communications environment in the control room
239
Improving the light-load efficiency of VRMs using parallel inductors
240
Improving the lightning performance of overhead distribution lines
241
Improving the lightning performance of overhead lines applying additional underbuilt shield wire
242
Improving the lightning protection of O.H.T.L in tropical areas with high resistivity soils through improving the ground systems
243
Improving the light-response of platinum doped silicon MSM photodetectors using X-ray irradiation
244
Improving the limit of detection (LOD) of microsensor used in detection of brain diseases via wavelet filter
245
Improving the linearity and output power of a Ku-band TWT by optimizing electron beam radius and helix structure
246
Improving the Linearity and Power Efficiency of Active Switched-Capacitor Filters in a Compact Die Area
247
Improving the linearity in high-speed analog-to-digital converters
248
Improving the linearity of ferrite loaded cavities using feedback
249
Improving the Linearity of GaN HEMTs by Optimizing Epitaxial Structure
250
Improving the linearity of piezoelectric ceramic actuators
251
Improving the linearity of the AD8361 “Tru-Pwr” RF detector IC
252
Improving the linearity of the steady-state gain characteristic by use of nonlinear feedback
253
Improving the link lifetime in VANETs
254
Improving the livelihood of single mothers through microcredit facilities
255
Improving the load balancing within the data network via modified AntNet algorithm
256
Improving the locality of the sparse matrix-vector product on shared memory multiprocessors
257
Improving the Locality Preserving Projection for dimensionality reduction
258
Improving the localization accuracy of RSSI-based RTLS by using diversity antenna techniques
259
Improving the Localization Accuracy of Virtual Sound Source through Reinforcement Learning
260
Improving the localization estimates using Kalman filters
261
Improving the localization of electrochemical micro-manufacturing with nanosecond pulse duration
262
Improving the localization of humanoid soccer robots in specified fields: A neural network approach
263
Improving the lookahead computation in G-DEVS/HLA environment
264
Improving the Lookup Performance of Chord Network by Hashing Landmark Clusters
265
Improving the loss performance of random early detection gateway using fuzzy logic control
266
Improving the lot of the Technician Engineer
267
Improving the low power operation of Full-Bridge Single-Stage power factor correctors
268
Improving the low temperature lightning surge performance of thyristor overvoltage protectors
269
Improving the Lower Bound on the Higher Order Nonlinearity of Boolean Functions With Prescribed Algebraic Immunity
270
Improving the Low-Temperature Performance of Electric Vehicles by Hybrid Energy Storage Systems
271
Improving the LPI and self-interference characteristics of the STANAG 4415 very robust HF waveform
272
Improving the lumen efficiency by air-gap embedded package in white light-emitting diodes
273
Improving the Luminescence of InGaN–GaN Blue LEDs Through Selective Ring-Region Activation of the Mg-Doped GaN Layer
274
Improving the luminescence of InGaN/GaN blue LEDs through selective ring-region ion implantation
275
Improving the Luminous Efficiency of Organic Light Emitting Diodes using a Modulated Doping Hole Injection Layer
276
Improving the LVRT capability of the DFIG-based wind turbines during fault
277
Improving the MAC error exponent using distributed structure
278
Improving the MAC layer performance in ad hoc networks of nodes with heterogeneous transmit power capabilities
279
Improving the MAC layer performance of Ad Hoc Networks by congestion control algorithms
280
Improving the macro-basis function using insertion method and iterative refinement process for planar structure with one-dimensional wave propagation
281
Improving the Magnetoelectric Response of Laminates Containing High Temperature Piezopolymers
282
Improving the mains transient immunity of microprocessor equipment
283
Improving the maintenance process and enabling prognostics for control actuators using CAHM software
284
Improving the Manageability of Enterprise Topologies Through Segmentation, Graph Transformation, and Analysis Strategies
285
Improving the management of chronic diseases using web-based technologies: an application in hemophilia care
286
Improving the management of protection and control system assets by using a platform concept
287
Improving the management of PTCA data and images by OODBMS
288
Improving the maneuverability of power assist valves by compensation considering of posture
289
Improving the man-machine interface through the analysis of expressiveness in human movement
290
Improving the manufacturability of electronic designs
291
Improving the manufacturing test interval and costs for telecommunication equipment
292
Improving the mapping of reversible circuits to quantum circuits using multiple target lines
293
Improving the maritime surface picture with a visualization aid to provide rapid situation awareness of information uncertainty
294
Improving the match between ability and challenge: Toward a framework for automatic level adaptation in game-based assessment and training
295
Improving the matching of graphs generated from shapes by the use of procrustes distances into a clique-based MAP formulation
296
Improving the matching precision of SIFT
297
Improving the maximum transmission distance of continuous variable quantum key distribution by using a noiseless linear amplifier
298
Improving the max-log-MAP turbo decoder
299
Improving the maze of university administration in high technology education
300
Improving the Measurement Accuracy of FBG Sensor Using Adaptive filters
301
Improving the Measurement Accuracy of Three-Dimensional Topography Changes Using Optical Satellite Stereo Image Data
302
Improving the Measurement of the Diameter of Si Spheres
303
Improving the measurement quality of a mini-spectrometric system by sharing the functions between hardware and software
304
Improving the measurements of high frequency radar: Reduced averaging times and bistatics
305
Improving the mechanical reliability of medium-voltage overhead lines: controlled extension devices, flexible insulators and anti-spinning masses
306
Improving the mechanical stability of a standard capacitor
307
Improving the mechanical stability of a standard capacitor
308
Improving the mechanical tolerances and radiation performance of shorted patches
309
Improving the Memorization Process by TAPN´s: A First Approach to Parameters Estimation
310
Improving the memory bandwidth of highly-integrated, wide-issue, microprocessor-based systems
311
Improving the memory footprint and runtime scalability of FPGA CAD algorithms
312
Improving the method for load balancing of service flows based on local management of network resources in cloud systems
313
Improving the methodology of text entry experiments
314
Improving the methodology to build non-series-parallel transistor arrangements
315
Improving the MFIE´s accuracy by using a mixed discretization
316
Improving the MIMO-OFDM systems performance-based GA
317
Improving the Misalignment Tolerance of Wireless Charging System by Optimizing the Compensate Capacitor
318
Improving the Mixed Formulation for Meshless Local Petrov–Galerkin Method
319
Improving the mobility of dvb handheld devices with inter-carrier interference compensation
320
Improving the Modeling of Oxygen-Band Absorption: A Model-Measurement Comparison
321
Improving the modeling of the noise part in the harmonic plus noise model of speech
322
Improving the Modeling of Use Case Relationship
323
Improving the modeling process
324
Improving the modelling of the water content of power transformer insulation in the frequency domain
325
Improving the Modifiability of the Architecture of Business Applications
326
Improving the modified global smoothing method for spatial distributed and large data-sets to use it in the real-time visualisation of simulation and measurement information
327
Improving the Modified Matrix Encoding on Steganography Method
328
Improving the MODIS global snow-mapping algorithm
329
Improving the Modulation Bandwidth in Semiconductor Lasers by Passive Feedback
330
Improving the module recognition rate of high density QR codes (Version 40) by using centrality bias
331
Improving the MS-TDNN for word spotting
332
Improving the multicommodity flow rates with network codes for two sources
333
Improving the Multimedia Processing of Relay Nodes in Mesh Wireless Networks
334
Improving the multimedia traffic performance over wireless LAN
335
Improving the multiple access method of CSMA/CA home networks
336
Improving the multiple errors detection coverage in distributed embedded systems
337
Improving the Murchison Widefield Array tile model for polarimetry
338
Improving the museum´s service by data mining and location-aware approach
339
Improving the MW-Mile Method Using the Power Factor-Based Approach for Pricing the Transmission Services
340
Improving the national science and technology policy development process
341
Improving the navigability of tagging systems with hierarchically constructed resource lists: A comparative study
342
Improving the navigation of indoor mobile robots using Kalman filter
343
Improving the NBTI characteristics of long-channel PMOSFETs by short channel with source underlap structure
344
Improving the near-metal performance of UHF RFID tags
345
Improving the near-perfect hybrid filter bank performance in the presence of realization errors
346
Improving the Network Energy Efficiency in MapReduce Systems
347
Improving the network flow problem using quantum search
348
Improving the Network Lifetime of MANETs through Cooperative MAC Protocol Design
349
Improving the network lifetime with energy-balancing routing: Application to RPL
350
Improving the network locality awareness for the BitTorrent content distribution network
351
Improving the network performance and management of operability regions
352
Improving the network performance using prediction based longest queue first (PLQF) scheduling algorithm
353
Improving the New Product Development Process through ICT Systems in the Aerospace Industry – A Report on Case Study Research
354
Improving the Newmark time integration scheme in finite element time domain methods
355
Improving the NIST Ionospheric Measurement System [for international time transfer]
356
Improving the NLOS optical scattering channel via beam reshaping
357
Improving the Noise Figure of the 60-GHz Radio-over-Fiber System using a System-on-Package EAM Module with Two-Stage LNAs
358
Improving the noise performance of adaptive delta modem
359
Improving the noise performance of communication systems: 1930s to early 1940s
360
Improving the noise performance of communication systems: 1930s to early 1940s [History of Communications]
361
Improving the noise performance of communication systems: radio and telephony developments of the 1920s [History of Communications]
362
Improving the noise performance of energy detector based UWB systems by optimizing the receiver parameters
363
Improving the noise-robustness of Mel-Frequency Cepstral Coefficients for speaker verification
364
Improving the Non-dominate Sorting Genetic Algorithm for Multi-objective Optimization
365
Improving the non-filtering steganographic algorithm using LSB verification method
366
Improving the Nonlinear Tolerance of Fiber-Based Optical Phase Conjugation
367
Improving the Nonlinear Tolerance of Polarization-Division-Multiplexed CO-OFDM in Long-Haul Fiber Transmission
368
Improving the non-quasi-static weak-to-strong-inversion four-terminal MOSFET model
369
Improving the normalized proportional allocation scheme for time-critical communication in FDDI networks
370
Improving the numerical efficiency and accuracy of the modal expansion inside gyrotron cavities
371
Improving the numerical efficiency of the B and D estimates produced by the combined deterministic-stochastic subspace identification algorithms
372
Improving the numerical efficiency of the method of moments for printed geometries
373
Improving the observability and controllability of datapaths for emulation-based debugging
374
Improving the oil & gas industry innovation with a strategic fuel: Distributed research and development
375
Improving the One-Bit Feedback Algorithm for Distributed Beamforming
376
Improving the On-Resistance of FETs for Power Applications
377
Improving the open-loop torque step response of induction motors
378
Improving the operation autonomy of SIMD processing elements by using guarded instructions and pseudo branches
379
Improving the Operation Efficiency of Supermedia Enhanced Internet Based Teleoperation via an Overlay Network
380
Improving the operation of 3-phase diode rectifiers using an asymmetrical half-bridge DC-link active filter
381
Improving the operation of distribution substations
382
Improving the operation of microgrid interfaced inverter using L-type filter
383
Improving the operation of optoelectronic oscillator by stabilizing the electrooptic modulator
384
Improving the operation of ZVT DC-DC converters
385
Improving the operational conditions for the sucker-rod pumping system
386
Improving the operational efficiency of fault repairing with partnership management
387
Improving the Optical Bandwidth of Passively Mode-Locked InAs Quantum Dot Lasers
388
Improving the optimization performance of NSGA-II algorithm by experiment design methods
389
Improving the optimum generalised stop-and-wait ARQ scheme
390
Improving the original Dual-T-Snakes model
391
Improving the orthogonal range search k-windows algorithm
392
Improving the Outage and Tifr Capacity of Spectrum Sharing Cognitive Radio Networks
393
Improving the outage probabilities of rake receivers for ultra-wideband outdoor communication
394
Improving the output performance from mid-infrared fibre lasers
395
Improving the overall environmental performance of existing power generating facilities
396
Improving the Overall Environmental Performance of Existing Power-Generating Facilities
397
Improving the OVO performance in Fuzzy Rule-Based Classification Systems by the genetic learning of the granularity level
398
Improving the Packet Delivery Performance for Concurrent Packet Transmissions in WSNs
399
Improving the parallelism and concurrency in decoupled architectures
400
Improving the parallelization efficiency of HEVC decoding
401
Improving the Parallelized Pollard Rho Method for Computing Elliptic Curve Discrete Logarithms
402
Improving the parameters of neural oscillators to generate joint trajectories of an exoskeleton for lower limbs
403
Improving the parametric Gaussian classifier using neural networks
404
Improving the Particle Swarm Algorithm and Optimizing the Network Intrusion Detection of Neural Network
405
Improving the payload of watermarking channels via LDPC coding
406
Improving the peak to average power demand of a switching type capacitor/PFN charger
407
Improving the pearson similarity equation for recommender systems by age parameter
408
Improving the perceived quality of half tone secret images in visual cryptography
409
Improving the performability of data transfer in mobile ad hoc networks
410
Improving the performance and efficiency of an adaptive amplification operation using configurable hardware
411
Improving the performance and reliability of IEC 61850 based substation using backup IED concept
412
Improving the performance and reliability of wireless in mobile streaming media
413
Improving the Performance Characteristics of PWLL
414
Improving the Performance Efficiency of an IDS by Exploiting Temporal Locality in Network Traffic
415
Improving the Performance in an Optical feedback Self-mixing Interferometry System using Digital Signal Pre-processing
416
Improving the performance in multimedia streaming networks: a differentiated service approach
417
Improving the performance metrics of beacon enabled IEEE 802.15.4 using adaptive synchronization algorithm for reliable communication
418
Improving the Performance of 110 GHz Membrane-Based Interconnects on Silicon: Modeling, Measurements, and Uncertainty Analysis
419
Improving the performance of 2D Discrete Wavelet Transform using data-level parallelism
420
Improving the Performance of 40-Gbit/s CPFSK by Using XPM-Based Format Converter
421
Improving the Performance of 4-State Turbo Codes with the Correction Impulse Method and Data Puncturing
422
Improving the performance of a 4-stage Bardenpho WWTP by means of decentralized automatic control
423
Improving the performance of a batch reactor using orthogonal collocation dynamic optimization method
424
Improving the performance of a distributed computing system through inconsistent caches
425
Improving the performance of a dynamic bandwidth management scheme
426
Improving the performance of a high frequency radio message network
427
Improving the Performance of a Hybrid Inorganic–Organic Light-Emitting Diode Through Structure Optimization
428
Improving the performance of a keyword spotting system by using support vector machines
429
Improving the performance of a Laser Guide Star Adaptive Optics system using identification methods
430
Improving the Performance of a Line Regulating Converter in a Converter-Dominated DC Microgrid System
431
Improving the performance of a low-frequency correlator
432
Improving the performance of a mixed excitation LPC vocoder in acoustic noise
433
Improving the performance of a neural-machine interface for artificial legs using prior knowledge of walking environment
434
Improving the performance of a neural-machine interface for prosthetic legs using adaptive pattern classifiers
435
Improving the performance of a non-volatile magnetic flip flop by exploiting the spin Hall effect
436
Improving the performance of a parallel data mining algorithm using communication message scheduling
437
Improving the performance of a printing system using Model Reference Adaptive Control: An LMI approach
438
Improving the Performance of a Ray Tracing Algorithm Using a GPU
439
Improving the Performance of a Recurrent Neural Network Convolutional Decoder
440
Improving the performance of a semi-active suspension at the damping-invariant point
441
Improving the performance of a slotted ALOHA packet radio network with an adaptive array
442
Improving the performance of a small microphone array at low frequencies using critical band and LPC codebooks
443
Improving the Performance of a Switch-Level Simulator Targeted for a Logic Simulation Machine
444
Improving the performance of a three-leg four-wire active power filter with a neutral wire filter inductor
445
Improving the performance of a traditional dryer functioning on renewable energy sources (part I)
446
Improving the performance of a two-frequency radar for vehicle automatic lateral control
447
Improving the performance of a variable speed wind pump with Z source inverter and PWM controller
448
Improving the Performance of a Wildlife Protection Cap by the Use of Salt Fog Testing
449
Improving the performance of ACO algorithms by adaptive control of candidate set
450
Improving the performance of active buffer management with per-flow information
451
Improving the performance of active set based Model Predictive Controls by dataflow methods
452
Improving the Performance of ActiveXML Workflows: The Formal Descriptions
453
Improving the performance of adaptive arrays in nonstationary environments through data-adaptive training
454
Improving the performance of aerial vehicles with delayed measures via state predictor-control: Experimental data validation
455
Improving the performance of AeroMACS by cooperative communications
456
Improving the performance of ALOHA system utilizing coded multi-user detection
457
Improving the Performance of an Accelerometer by Using a BLMS Adaptive Filter
458
Improving the performance of an active power filter as part of a multifunctional high power electrical vehicle charging station
459
Improving the performance of an adaptive filtering structure by applying the generalised structural subband decomposition
460
Improving the Performance of an Electrostatically Actuated MEMS by Nonlinear Control: Some Advances and Comparisons
461
Improving the performance of an ensemble-based exudate detection system using stochastic parameter optimization
462
Improving the Performance of an FMCW Indoor Localization System by Optimizing the Ranging Estimator
463
Improving the performance of an FPGA based Model design for sensor monitoring using PlanAhead tool
464
Improving the performance of an HMM-based fingerprint recognition system
465
Improving the performance of an isolated photovoltaic grid-connected inverter using a high-frequency-link resonant capacitor
466
Improving the performance of an LVCSR system through ensembles of acoustic models
467
Improving the Performance of an Optimistic Concurrency Control Algorithm Through Timestamps and Versions
468
Improving the performance of an SOC design for network processing based on FPGA with PlanAhead
469
Improving the performance of ANN training with an unsupervised filtering method
470
Improving the performance of annular slot array antenna using conductor rings and dielectric loading
471
Improving the performance of AODV in hybrid WMN by architecture pattern
472
Improving the performance of AR estimation of near-field signal sources by decimation
473
Improving the performance of ARQ protocols over AWGN channels using an optimized energy allocation
474
Improving the performance of artificial immune system in estimation problems with normalization technique: A case study of USA, Japan and France electricity consumption
475
Improving the performance of assembly line: Review with case study
476
Improving the performance of asymmetric data application over the HFC network
477
Improving the performance of asymmetric M-PAM signal constellations in Euclidean space by embedding them in hyperbolic space
478
Improving the Performance of Asynchronous Communication in Long-Distance Delay-Sensitive Networks through the Development of Context-Aware Architectures
479
Improving the performance of automatic sequential test generation by targeting hard-to-test faults
480
Improving the performance of band-to-band tunneling transistors by tuning the gate oxide and the dopant concentration
481
Improving the Performance of Biological Data Analysis in Cloud Computing Platforms
482
Improving the performance of blind CDMA 2D-RAKE receivers with phase ambiguity in the bit decision variable
483
Improving the performance of Bluetooth piconets with synchronous and asynchronous traffic
484
Improving the performance of boost PFC EMI filters
485
Improving the performance of brain-computer interface through meditation practicing
486
Improving the Performance of Brain-Computer Interface Using Multi-modal Neuroimaging
487
Improving the performance of broadband Internet services using layer-3 ATM switches
488
Improving the performance of broadcasting in ad hoc wireless networks
489
Improving the Performance of Buddy Systems
490
Improving the performance of CAD optimization algorithms using on-line meta-level control
491
Improving the Performance of CA-GMRES on Multicores with Multiple GPUs
492
Improving the performance of capacitive micromachined ultrasound transducers using modified membrane and support structures
493
Improving the performance of CAR systems based on mobile phones
494
Improving the performance of CdZnTe detectors using infrared stimulation
495
Improving the performance of cell edge users with fractional coordinated fair scheduling
496
Improving the performance of cell-loss recovery in ATM networks
497
Improving the performance of CELP-based speech coding at low bit rates
498
Improving the Performance of Chaos-Based Modulations Via Serial Concatenation
499
Improving the performance of classifiers in high-dimensional remote sensing applications: an adaptive resampling strategy for error-prone exemplars (ARESEPE)
500
Improving the Performance of Cluster Applications through I/O Proxy Architecture
501
Improving the performance of cluster oriented genetic algorithms (COGAs)
502
Improving the performance of coded FDFR multi-antenna systems with turbo-decoding
503
Improving the Performance of Collaborative Filtering Recommender Systems through User Profile Clustering
504
Improving the performance of communication-intensive parallel applications executing on clusters
505
Improving the performance of compact signature analysis using LFSR
506
Improving the performance of compliant motions by online geometric uncertainty reduction
507
Improving the performance of continuous non-invasive estimation of blood pressure using ECG and PPG
508
Improving the performance of cooperating TCP connections
509
Improving the performance of coordinated checkpointers on networks of workstations using RAID techniques
510
Improving the performance of cough sound discriminator in reverberant environments using microphone array
511
Improving the Performance of Counter-Based Broadcast Scheme for Mobile AD HOC Networks
512
Improving the performance of CPU architectures by reducing the Operating System overhead
513
Improving the performance of cyclic ESPRIT via real-valued decomposition
514
Improving the performance of deadlock recovery based routing in irregular mesh NoCs using added mesh-like links
515
Improving the performance of delay based protocol in delivering real time media via early retransmission
516
Improving the performance of digital radio mondiale plus (DRM+) by LDPC channel coding
517
Improving the performance of direct interface circuits using the Vernier technique
518
Improving the Performance of Directional Medium Access Control Protocols with Smart Antennas for Mobile Ad hoc Network
519
Improving the performance of discrete Lagrange-multiplier search for solving hard SAT problems
520
Improving the performance of dispatching rules in semiconductor manufacturing by iterative simulation
521
Improving the performance of distributed applications using active networks
522
Improving the performance of distributed CORBA applications
523
Improving the performance of distributed turbo trellis coding scheme over relay channel
524
Improving the performance of distributed virtual environment systems
525
Improving the Performance of DMFC by Using a novel Grafting Method to Grow CNTs
526
Improving the performance of DSM systems via compiler involvement
527
Improving the performance of DSP systems for MIMO processing
528
Improving the Performance of Dynamical Simulations Via Multiple Right-Hand Sides
529
Improving the performance of End-to-End single rate Multicast Congestion Control
530
Improving the performance of evolutionary algorithms by soft-constraining their sampling capabilities
531
Improving the performance of evolutionary algorithms for the multiobjective 0/1 knapsack problem using ϵ -dominance
532
Improving the performance of evolutionary optimization by dynamically scaling the evaluation function
533
Improving the Performance of Fast Handovers in Mobile IPv6
534
Improving the Performance of Fault-Aware Scheduling Policies for Desktop Grids (Be Lazy, Be Cool)
535
Improving the performance of FBG sensors in a WDM network using a simulated annealing technique
536
Improving the performance of features extraction from Chinese customer reviews
537
Improving the performance of Federal Standard 1016 (CELP)
538
Improving the performance of fiber optic parametric amplifiers with optical phase conjugation
539
Improving the performance of FiWi networks through collaboration between ONU and APs
540
Improving the performance of fixed broadband beamformer using auxiliary elements
541
Improving the Performance of FLN by Using Similarity Measures and Evolutionary Algorithms
542
Improving the Performance of Fractional Order Differential Filter by the Fractional Sampling Delay
543
Improving the performance of fuzzy classification systems by membership function learning and feature selection
544
Improving the performance of fuzzy classifier systems for pattern classification problems with continuous attributes
545
Improving the performance of fuzzy clustering algorithms through outlier identification
546
Improving the performance of fuzzy systems by using local partitioning
547
Improving the Performance of GALS-Based NoCs in the Presence of Process Variation
548
Improving the Performance of Genetic Algorithm in Capacitated Vehicle Routing Problem using Self Imposed Constraints
549
Improving the Performance of Global Communication on a 3D Torus Network
550
Improving the performance of globalized dual heuristic programming for fault tolerant control through an online learning supervisor
551
Improving the Performance of GMM Based Voice Conversion Method
552
Improving the performance of graph analysis through partitioning with sampling
553
Improving the performance of hand posture classification by perimeter sensor with sEMG
554
Improving the Performance of Heuristic Searches with Judicious Initial Point Selection
555
Improving the performance of HF data link protocol using turbo codes
556
Improving the performance of hierarchical bandwidth allocation for upstream EPON
557
Improving the performance of hierarchical scheduling for rendering
558
Improving the performance of hierarchical vector quantization using segmentation
559
Improving the performance of Higher Order Disturbance Observers: A position approach
560
Improving the performance of HMM-based very low bit rate speech coding
561
Improving the Performance of Hybrid Wireless Mesh Protocol
562
Improving the performance of hypervisor-based fault tolerance
563
Improving the performance of ICA based microarray data prediction models with genetic algorithm
564
Improving the Performance of IndependentTask Assignment Heuristics MinMin,MaxMin and Sufferage
565
Improving the performance of industrial boiler using artificial neural network modeling and advanced combustion control
566
Improving the performance of industrial robot manipulators by neural networks
567
Improving the performance of input-queued ATM packet switches
568
Improving the Performance of Interactive Configuration with Regular String Constraints
569
Improving the performance of interactive TCP applications using service differentiation
570
Improving the performance of intrusion detection using Dialog-based Payload Aggregation
571
Improving the performance of IPv6 packet transmission over LAN
572
Improving the Performance of Iris Recogniton System Using Eyelids and Eyelashes Detection and Iris Image Enhancement
573
Improving the performance of IS-54/136 through the use of the MDM scheme
574
Improving the performance of ITU-T G.729A for VoIP
575
Improving the Performance of IWDM FBG Sensing System Using Tabu-Gradient Search Algorithm
576
Improving the performance of Kalman filter for hand tracking in Persian sign language video
577
Improving the performance of Kanerva´s associate memory
578
Improving the performance of Kriging based interpolation application with parallel processors
579
Improving the performance of label-free optical biosensors
580
Improving the Performance of Latching Phase - Shifters with the use of Currugated Waveguides.
581
Improving the performance of LDGM codes over indoor channels by exploiting the channel statistics
582
Improving the performance of linear inverse solutions by inverting the resolution matrix
583
Improving the performance of linear MMSE detectors in multi-cell DS-CDMA system
584
Improving the performance of linear parallel interference cancellation for CDMA using a method of the statistical mechanics
585
Improving the performance of linear systems by adding a hybrid loop: The output feedback case
586
Improving the performance of lithium-ion battery through doping the conductive agent in porous LiFePO4
587
Improving the performance of loading web pages in the environment with high latency connections
588
Improving the performance of long history scalar and vector LSP quantizers
589
Improving the Performance of LP Decoders for Cyclic Codes
590
Improving the performance of LPC-CVSD tandem connections by phase modification
591
Improving the performance of LT codes
592
Improving the performance of LZWGA by using a new mutation method
593
Improving the performance of machine learning based face recognition algorithm with Multiple Weighted Facial Attribute Sets
594
Improving the performance of machine learning classifiers for Breast Cancer diagnosis based on feature selection
595
Improving the performance of manufacturer-distributor partnerships through knowledge transfer - a knowledge-based perspective
596
Improving the performance of MDA by finding the best subspaces dimension based on LDA for face recognition
597
Improving the performance of MDA by finding the best subspaces dimension based on LDA for face recognition
598
Improving the performance of message-passing applications by multithreading
599
Improving the performance of MGM-based voice conversion by preparing training data method
600
Improving the performance of microstrip-patch antennas
601
Improving the performance of Mobile Adhoc networks using dynamic group data caching scheme
602
Improving the performance of mobile ad-hoc routing
603
Improving the performance of mobile applications using cloud computing
604
Improving the performance of mobile broadcasting systems using multiple base stations and distributed space-time codes
605
Improving the performance of mobile data collecting systems for electricity meter reading using Wireless Sensor Network
606
Improving the performance of model-order selection criteria by partial-model selection search
607
Improving the performance of modular multilevel converter by reducing the dead time effect
608
Improving the performance of MPCA+MDA for face recognition
609
Improving the performance of MPCA+MDA for face recognition
610
Improving the performance of MPEG audio coder layer I using adaptive representation of bit allocation information
611
Improving the performance of MPEG compatible encoders using on line retrainable neural networks
612
Improving the performance of MPEG-4 transmission in IEEE 802.15.3 WPAN
613
Improving the Performance of MPI Applications over Computational Grid
614
Improving the performance of MPI derived datatypes by optimizing memory-access cost
615
Improving the Performance of Multi-channel Systems by Limiting Contention to the Control Channel
616
Improving the performance of multi-class SVMs in face recognition with nearest neighbor rule
617
Improving the performance of multi-criteria recommendation system using fuzzy integrated meta heuristic
618
Improving the performance of multi-dimensional access structures based on k-d-trees
619
Improving the performance of multi-layer perceptrons where limited training data are available for some classes
620
Improving the performance of multilevel median filters for image processing
621
Improving the performance of multipath congestion control over wireless networks
622
Improving the performance of multipath TCP over heterogeneous paths using slow path adaptation
623
Improving the Performance of Multiple Description Coding Based on Scalar Quantization
624
Improving the performance of multiple models fuzzy control by using semi-fixed and adaptive models
625
Improving the performance of multiprocessor systems-a study of the WorldSpan PAD
626
Improving the performance of multi-robot systems by task switching
627
Improving the Performance of Multithreaded Sparse Matrix-Vector Multiplication Using Index and Value Compression
628
Improving the Performance of N-ary RAID by Writing with XOR Operation
629
Improving the Performance of Network Congestion Control Algorithms
630
Improving the performance of network traffic prediction for academic organization by using association rule mining
631
Improving the Performance of New Product Teams
632
Improving the performance of new service overlaid ASK-DPSK WDM-PON with nonbinary LDPC coding
633
Improving the performance of NIRS-based brain-computer interfaces in the presence of background auditory distractions
634
Improving the performance of nonplanar systolic architectures through increased fan-out
635
Improving the performance of null-field generation based preconditioner with approximate MLFMA technique
636
Improving the performance of OFDM-based vehicular systems through diversity coding
637
Improving the performance of OLTP workloads on SMP computer systems by limiting modified cache lines
638
Improving the Performance of On-Board Cache for Flash-Based Solid-State Drives
639
Improving the performance of online auction sites through closing time rescheduling
640
Improving the performance of online classifier by removing the error samples from offline training data
641
Improving the performance of on-road vehicle detection by combining Gabor and wavelet features
642
Improving the Performance of Optical Burst Switching with Large Control Overhead
643
Improving the performance of optical phase conjugator using a mid-way filter
644
Improving the performance of optimal joint decoding
645
Improving the performance of optimum parallel algorithms on SIMD array processors: programming techniques and methods
646
Improving the performance of organic light-emitting diodes containing BCP/LiF/Al by thermal annealing
647
Improving the performance of out-of-core computations
648
Improving the Performance of Overlapped Transmission in Wireless Ad Hoc Networks
649
Improving the performance of overlay multicast with dynamic adaptation
650
Improving the Performance of P300-Speller with Familiar Face Paradigm Using Support Vector Machine Ensemble
651
Improving the performance of packet radio networks with adaptive array antennas
652
Improving the performance of parallel relaxation-based circuit simulators
653
Improving the performance of particle swarm optimization using adaptive critics designs
654
Improving the performance of particle swarms through dimension reductions — A case study with locust swarms
655
Improving the Performance of Partitioning Methods for Crowd Simulations
656
Improving the Performance of Passive Network Monitoring Applications using Locality Buffering
657
Improving the performance of PC-based controllers for robot-assisted surgery
658
Improving the Performance of Personalized Recommendation with Ontological User Interest Model
659
Improving the performance of physical servers using a proxy servers accelerators
660
Improving the performance of piezoresistive force sensors by modeling sensor capacitance
661
Improving the performance of PIR Protocol in Outsourced Databases
662
Improving the Performance of Post-FFT Array Processing in OFDM Systems with Short Training Sequences
663
Improving the performance of power-aware multi-rate IEEE 802.11 in multihop wireless networks
664
Improving the performance of probabilistic neural networks
665
Improving the performance of program monitors with compiler support in multi-core environment
666
Improving the performance of projection-based cancelable fingerprint template method
667
Improving the Performance of Projection-Based Image Registration
668
Improving the performance of proposed multi-agent domain specific search engine using query refinement component
669
Improving the performance of protection schemes in three level IGCT-based neutral point clamped converters
670
Improving the Performance of Protograph LDPC Codes by Using Different Transmission Energies
671
Improving the performance of PV grid interface inverter using the adaptive hysteresis band current controller
672
Improving the performance of Q-learning using simultanouse Q-values updating
673
Improving the Performance of QoS Models in MANETs through Interference Monitoring and Correction
674
Improving the performance of QPSK BICM-ID by mapping on the hypercube
675
Improving the Performance of Quasi-Hemispherical CdZnTe Detectors Using Infrared Stimulation
676
Improving the performance of query-based routing protocols through “diversity injection”
677
Improving the performance of RDM watermarking by means of trellis coded quantisation
678
Improving the Performance of Read Operations in Distributed File System
679
Improving the performance of real-time communication services on high-speed LANs under topology changes
680
Improving the performance of reconfigurable WDM lightwave networks with deflection routing via node reassignment
681
Improving the performance of RED deployment on a class based queue with shared buffers
682
Improving the performance of regular networks with source routing
683
Improving the performance of reliable transport protocols in mobile computing environments
684
Improving the Performance of Remote I/O Using Asynchronous Primitives
685
Improving the performance of Root-MUSIC via pseudo-noise resampling and conventional beamformer
686
Improving the Performance of Route Control Middleboxes in a Competitive Environment
687
Improving the performance of RSS detection using wireless open-source platforms
688
Improving the Performance of Sampled-Grating DBR Laser-Based Analog Optical Transmitters
689
Improving the Performance of Sampling-Based Motion Planning With Symmetry-Based Gap Reduction
690
Improving the performance of sampling-based planners by using a symmetry-exploiting gap reduction algorithm
691
Improving the Performance of Saturated Cores Fault Current Limiters by Varying Winding Density in the AC Coils
692
Improving the Performance of Seismic Wave Simulations with Dynamic Load Balancing
693
Improving the performance of self-organized robotic clustering: Modeling and planning sequential changes to the division of labor
694
Improving the Performance of Service-based Applications by Dynamic Service Execution
695
Improving the Performance of Shared Memory Communication in Impulse C
696
Improving the performance of SIFT and CSLBP for image copy detection
697
Improving the performance of SIFT using Bilateral Filter and its application to generic object recognition
698
Improving the Performance of SiGe Metal–Semiconductor–Metal Photodetectors by Using an Amorphous Silicon Passivation Layer
699
Improving the performance of skin segmentation in quasi-skin regions via multiple classifier system
700
Improving the performance of small planar detectors for dedicated PET instrument
701
Improving the performance of small planar detectors for dedicated PET instruments
702
Improving the performance of smart grid over-current protection relays
703
Improving the performance of SM-MIMO/BICM-ID systems with LLR distribution matching
704
Improving the performance of software distributed shared memory with speculation
705
Improving the performance of space shift keying (SSK) modulation via opportunistic power allocation
706
Improving the performance of spatial light modulators using custom microfabrication techniques
707
Improving the performance of spatial modulation by phase-only pre-scaling
708
Improving the performance of speaker verification systems under noisy conditions using low level features and score level fusion
709
Improving the performance of speech recognition systems using fault-tolerant techniques
710
Improving the performance of speed sensorless induction motor drive with rotor broken bar failure by stator current signature analysis
711
Improving the performance of stabilizing controls for nonlinear systems
712
Improving the Performance of Superjunction Devices Having Fixed Charge in Isolation and Termination Oxide Layers
713
Improving the Performance of Support Vector Machines by Learning Feature Maps
714
Improving the performance of switched diversity with post-examining selection
715
Improving the performance of switched diversity with post-examining selection
716
Improving the performance of symmetric diffusion networks via biologically inspired constraints
717
Improving the performance of TAntNet-2 by using multi forward scouts
718
Improving the performance of TCP in structure-less networks with virtual infrastructures
719
Improving the performance of TCP Vegas in a heterogeneous environment
720
Improving the Performance of TCP Wireless Video Streaming with a Novel Playback Adaptation Algorithm
721
Improving the Performance of TCP/IP over Wireless Networks with a RETSINA Agent
722
Improving the Performance of Text Categorization Using Automatic Summarization
723
Improving the performance of the 16 kb/s LD-CELP speech coder
724
Improving the performance of the 3-dB microstrip hybrid-ring based power dividers
725
Improving the performance of the ALSTOM baseline controller using multiobjective optimisation
726
Improving the Performance of the Capon Algorithm by Nulling Elements of an Inverse Covariance Matrix
727
Improving the Performance of the Deferrable Server Based Garbage Collection Scheduling Strategy
728
Improving the Performance of the Distributed Scheduler in IEEE 802.16 Mesh Networks
729
Improving the Performance of the Divide-Add Fused Operation Using Variable Latency Quotient Generation
730
Improving the performance of the DTC saturated model of the induction motor in case of two level and three level VSI using GA and PSO algorithms
731
Improving the performance of the enterprise information system via optimal scheduling
732
Improving the performance of the equivalent wind method for the aggregation of DFIG wind turbines
733
Improving the Performance of the Extreme-Scale Simulator
734
Improving the performance of the force comparator in a watt balance based on pressure balances
735
Improving the performance of the FPBA algorithm using random transmitter power levels
736
Improving the performance of the HONG network with boosting
737
Improving the performance of the instantaneous Blind audio Source Separation algorithms
738
Improving the Performance of the Kernighan-Lin and Simulated Annealing Graph Bisection Algorithms
739
Improving the performance of the LF-ASD brain computer interface by means of genetic algorithm
740
Improving the Performance of the Link Parser
741
Improving the performance of the LMS algorithm via cooperative learning
742
Improving the Performance of the Multilevel Matrix Decomposition Algorithm for 2.5-D Structures. Application to metamaterials
743
Improving the performance of the NP4000 letter sorting machine through better destacking-a study on `in service´ development
744
Improving the Performance of the Pareto Fitness Genetic Algorithm for Multi-Objective Discrete Optimization
745
Improving the Performance of the PI Systems through the Use of Neural Network
746
Improving the performance of the product fusion strategy
747
Improving the performance of the quadtree-based image approximation via the generalised DCT
748
Improving the performance of the quantized biorthogonal 9/7 wavelet filters
749
Improving the performance of the repeating permutation representation using morphogenic computation and generalised modified order crossover
750
Improving the performance of the semi-blind cross-relation-based channel estimation method
751
Improving the Performance of the Sense-Amplifier Circuit Through Pre-Amplification Strobing and Noise-Matched Clipping
752
Improving the performance of the SP-3000 PET detector modules
753
Improving the performance of the SP-3000 PET detector modules
754
Improving the Performance of the Sparse Matrix Vector Product with GPUs
755
Improving the performance of the stator current limiter of excitation control systems
756
Improving the Performance of the Symmetric Sparse Matrix-Vector Multiplication in Multicore
757
Improving the performance of the time-of-arrival estimator in MIMO systems
758
Improving the Performance of the Two-Stage Sampling Particle Filter: A Statistical Perspective
759
Improving the performance of the UCA when using LTE codebook feedback
760
Improving the performance of the World Wide Web over wireless networks
761
Improving the performance of thermally constrained multi core processors using DTM techniques
762
Improving the Performance of TOA Over Wireless Systems to Track Mobile Targets
763
Improving the Performance of Topic Tracking System by Ensemble
764
Improving the performance of Transport Control Protocol over 802.11 wireless networks
765
Improving the performance of turbo codes through concatenation with rectangular parity check codes
766
Improving the performance of turbo codes via sub-optimal rate allocation
767
Improving the performance of turbo codes with a simple protection scheme for error-prone bit positions
768
Improving the Performance of Two-state Mental Task Brain-Computer Interface Design Using Linear Discriminant Classifier
769
Improving the performance of UHF RFID communication in a small scale fading channel
770
Improving the performance of Uintah: A large-scale adaptive meshing computational framework
771
Improving the performance of Unitary ESPRIT via pseudo-noise resampling
772
Improving the Performance of User-Based Collaborative Filtering by Mining Latent Attributes of Neighborhood
773
Improving the performance of variable speed AC drives by using PWM-rectifiers
774
Improving the performance of variable-length encoded systems through cooperation between source and channel decoders
775
Improving the Performance of Vehicle Detection and Verification by Log Gabor Filter Optimization
776
Improving the performance of vehicular networks in high traffic density conditions with cognitive radios
777
Improving the performance of VNC for high-resolution display walls
778
Improving the performance of VTLN under mismatched speaker conditions and making it approach that of matched speaker conditions
779
Improving the performance of V-VLAST with STTC
780
Improving the performance of wavelet domain spread spectrum watermarking systems using space-time block codes
781
Improving the Performance of Web Search Using Users´ Bookmarks
782
Improving the performance of Web Services in wireless sensor networks
783
Improving the Performance of Web Services Using Deployment-Time Binding Selection
784
Improving the performance of weighted Lagrange-multiplier methods for nonlinear constrained optimization
785
Improving the Performance of Wireless Ad Hoc Networks Through MAC Layer Design
786
Improving the performance of wireless H.264 video broadcasting through a cross-layer design
787
Improving the performance of wireless LAN using a new scheduling algorithm
788
Improving the Performance of Wireless Links Using Hybrid ARQ Based on RSM and Turbo Codes
789
Improving the Performance of Wireless Sensor Networks Through Optimized Complex Field Network Coding
790
Improving the performance of WLAN to support VoIP application
791
Improving the performance of XML based technologies by caching and reusing information
792
Improving the performance properties of a dipole element closely spaced to a PEC ground plane
793
Improving the Performances of a Reverberation Chamber: a Real Case
794
Improving The Performances Of An Impedance Measurement System II. Measurement Principle
795
Improving The Performances Of An Impedance Measurement System. I. The Test Signal Generator
796
Improving the Performances of Distributed Coordinated Scheduling in IEEE 802.16 Mesh Networks
797
Improving the performances of polymer light-emitting diode by inserting an ultrathin NiO layer
798
Improving the Performances of Power Converters working in no-continuous duty
799
Improving the Performances of Silicon Detector Electronics in High Energy Experiments by Optoelectronic Transmission of Analog Signals between Beam Line and Counting Room
800
Improving the performances of surface Plasmon resonance sensor in the infrared region by adding thin dielectric over-layer
801
Improving the Performances of the Contrast Source Extended Born Inversion Method by Subspace Techniques
802
Improving the perturb and observe Maximum Power Point Tracking by using Sliding Mode control
803
Improving the Perturbed Quantization steganography by Modified Matrix Encoding
804
Improving the Phase Noise Tolerance of Subbanded DFT-Spread OFDM by Nonredundant Interleaving
805
Improving the phase resolution of a micromotor-actuated phased reflectarray
806
Improving the Phase Stability of the SLAC RF Driveline Network for SLC Operation
807
Improving the photonic integration density and functionalities with nano-waveguides and -structures
808
Improving the physical security and availability of substations by using new switchgear concepts
809
Improving the Physical-Layer Security of Wireless Two-Way Relaying via Analog Network Coding
810
Improving the picture quality of cable television
811
Improving the PIM routing protocol with adaptive switching mechanism between its two sparse sub-modes
812
Improving the piston assembly by machine vision recognition technology
813
Improving the planning of buildings with data visualization
814
Improving the pole relocating properties of vector fitting
815
Improving the pole relocating properties of vector fitting
816
Improving the pose accuracy of a planar 3RRR parallel manipulator using kinematic redundancy and optimized switching patterns
817
Improving the position of electricity as primary energy for space heating
818
Improving the Positioning Accuracy of a Neurosurgical Robot System
819
Improving the power and spectral performance of a 27-33 THz AgGaS 2 difference-frequency spectrometer
820
Improving the power conversion process in UPS systems
821
Improving the Power Density of the ZVS-SVM Controlled Three-Phase Boost PFC Converter
822
Improving the Power Efficiency in End-Pumped Gain-Guided Index-Antiguided Fiber Amplifiers
823
Improving the power efficiency of enhanced unipolar OFDM for optical wireless communication
824
Improving the power evenness of power amplifiers using out-of-phase combining
825
Improving the Power of Fault Testing Using Reduced Order Models
826
Improving the power quality and power reliability by energy storage technology - The practice of SMEPC
827
Improving the power quality in real network by using fault current limiter and determination of optimum impedance by the proposed algorithm
828
Improving the Power Quality of Traction Power Systems with a Single-Feeding Wire
829
Improving the power quality performance for distributed power generation
830
Improving the Power-Added Efficiency of FET Amplifiers Operating with Varying-Envelope Signals
831
Improving the power-delay product in SCL circuits using source follower output stage
832
Improving the practice of systems engineering: Boot strapping grass roots success
833
Improving the Preciseness of Dependence Analysis Using Exception Analysis
834
Improving the precision and accuracy of Monte Carlo simulation in positron emission tomography
835
Improving the precision and accuracy of Monte Carlo simulation in positron emission tomography
836
Improving the Precision and Efficiency of Log-Based IP Packet Traceback
837
Improving the precision of a robot
838
Improving the precision of CBIR systems by feature selection using binary gravitational search algorithm
839
Improving the Precision of Dependence-Based Defect Mining by Supervised Learning of Rule and Violation Graphs
840
Improving the Precision of Fowler´s Definitions of Bad Smells
841
Improving the precision of INCA by eliminating solutions with spurious cycles
842
Improving the precision of multimode optical fiber attenuation measurements/
843
Improving the precision of RSSI-based low-energy localization using path loss exponent estimation
844
Improving the precision on multi robot localization by using a series of filters hierarchically distributed
845
Improving the precision ratio using semantic based search
846
Improving the predictability of ICU illness severity scales
847
Improving the predictable assembly of service-oriented architectures
848
Improving the prediction accuracy of constitutive model with ANN models
849
Improving the prediction accuracy of video quality metrics
850
Improving the Prediction of Clinical Outcomes from Genomic Data Using Multiresolution Analysis
851
Improving the prediction of radial basis function networks for power systems
852
Improving the prediction of sub-cellular locations of proteins with a particle swarm optimization-based boosting strategy
853
Improving the predictions of the circle criterion by combining quadratic forms
854
Improving the predictive power of modeling the emitter diffusion by fully including the phosphsilicate glass (PSG) layer
855
Improving the PRF of high pressure gas switches
856
Improving the primary power standard below 10 MHz with thermoelectric sensors
857
Improving the printing quality of an inkjet printhead using MIMO model predictive control
858
Improving the priority service provided in a token ring with the new ring/bus protocol
859
Improving the probability of complete decoding of random code by trading-off computational complexity
860
Improving the process [of publishing in this Transactions]
861
Improving the process variation tolerability of flip-flops for UDSM circuit design
862
Improving the process-based simulation of growth heterogeneities in agricultural stands through assimilation of earth observation data
863
Improving the processing of decision support queries: the case for a DSS optimizer
864
Improving the Processing Power Efficiency of Minimum Selection GSC with Adaptive Modulation and Post-Combining Power Control
865
Improving the process-variation tolerance of digital circuits using gate sizing and statistical techniques
866
Improving the production of gas in landfills by methanogenic sand layer
867
Improving the productive efficiency of electric resistance weld tube mills
868
Improving the productivity of a multi-head surface mounting machine with genetic algorithms
869
Improving the productivity of a packaging line using lean manufacturing tools and simulation
870
Improving the productivity of complex electronic systems design by utilizing applied design methodologies
871
Improving the productivity of electroplating lines by changing the layout of the tanks
872
Improving the Productivity of Engineering Development Organizations
873
Improving the program performance through prioritized disk operation
874
Improving the projection method for TOA source localization in the presence of sensor position errors
875
Improving the propagation characteristics of Boolean function and cheating immune secret sharing
876
Improving the properties of metallic materials by surface alloying induced with a pulsed electron beam
877
Improving the proportion of at-speed tests in scan BIST
878
Improving the protection of EHV teed feeders using local agents
879
Improving the protective performance of the Gas turbine and HRSG trip from hydraulic damper closing in power plant
880
Improving the PTP synchronization accuracy under asymmetric delay conditions
881
Improving the Public Health Information Network through Semantic Modeling
882
Improving the pumping efficiency of a Nd3+glass laser using dyes
883
Improving the QoE of Citrix Thin Client Users
884
Improving the QoE of mobile data access for long-lived connections in cellular networks
885
Improving the QoS in IEEE 802.11e Based on the Method of Virtual Heap Tree
886
Improving the QoS of Bluetooth through turbo coding
887
Improving the QoS of Web Applications across Multiple Virtual Machines in Cloud Computing Environment
888
Improving the QoS of WS compositions based on redundant services
889
Improving the QoS performance of EDCF in IEEE 802.11e wireless LANs
890
Improving the quadratic objective function in module placement
891
Improving the quality and reliability of traffic differentiation in IP networks
892
Improving the Quality and the Comprehension of Requirements: Disciplined Use Cases and Mockups
893
Improving the quality control and accuracy of HF radar currents
894
Improving the quality factor estimation for differentially driven RF CMOS inductor
895
Improving the quality in research publications
896
Improving the quality of a Physical Unclonable Function using configurable Ring Oscillators
897
Improving the Quality of Agent-Based Systems: Integration of Requirements Modeling into Gaia
898
Improving the Quality of AspectJ Application: Translating Name-Based Pointcuts to Analysis-Based Pointcuts
899
Improving the quality of attenuation imaging using full angular spatial compounding
900
Improving the quality of biomedical signal tracking using prediction algorithms
901
Improving the Quality of Bounded Model Checking by Means of Coverage Estimation
902
Improving the quality of British engineering
903
Improving the quality of classification trees via restructuring
904
Improving the Quality of Clustered Graph Drawing through a Dummy Element Approach
905
Improving the quality of clustering using cluster ensembles
906
Improving the quality of compressed sensing MRI that exploits adjacent slice similarity
907
Improving the Quality of Context-Aware Applications: An Activity-Oriented Context Approach
908
Improving the quality of controls and reducing costs for on-site adjustments with emulation:an example of emulation in baggage handling
909
Improving the quality of degraded document images
910
Improving the Quality of Delay-Based PUFs via Optical Proximity Correction
911
Improving the Quality of Deployed Systems through Remote Analysis, Monitoring, and Testing
912
Improving the quality of depth image based rendering for 3D Video systems
913
Improving the Quality of Discussion Forum discourses by Using an Internal Market
914
Improving the quality of dual coat amide imide/polyester wire by using the dissipation factor as a bake indicator
915
Improving the quality of ECGs collected using mobile phones: The PhysioNet/Computing in Cardiology Challenge 2011
916
Improving the quality of energy supplied by a double-fed induction generator fed by multilevel inverters
917
Improving the quality of energy supplied by a doubly-fed induction generator
918
Improving the quality of engineering education by controlling the incoming contingent
919
Improving the quality of engineering education in India: A research on ICT based education system in RGUKT
920
Improving the quality of engineering internship experiences with enduring wisdom from different cultures
921
Improving the Quality of Epitaxial Foils Produced Using a Porous Silicon-based Layer Transfer Process for High-Efficiency Thin-Film Crystalline Silicon Solar Cells
922
Improving the quality of existing quadrupoles
923
Improving the quality of experience with size-based and opportunistic scheduling
924
Improving the quality of extracted endmembers
925
Improving the quality of field data reliability analysis
926
Improving the Quality of GNU/Linux Distributions
927
Improving the Quality of Graduate Education by Association Rules Analysis
928
Improving the quality of heart rate variability spectra by imposing a constraint on the amount of ectopy in each data segment
929
Improving the quality of labels for self-organising maps using fine-tuning
930
Improving the quality of large-scale database-centric software systems by analyzing database access code
931
Improving the quality of life of dependent and disabled people through home automation and tele-assistance
932
Improving the Quality of Life of People with Dementia through the Use of Socially Assistive Robots
933
Improving the quality of Machine Translation using rule based tense synthesizer for Hindi
934
Improving the Quality of Mapping Solutions in the System Supporting SLA-Based Workflows with Parallel Processing Technology
935
Improving the quality of medical images in shearlet domain
936
Improving the quality of mesh simplification with texture saliency measurement
937
Improving the quality of MT output using novel name entity translation scheme
938
Improving the Quality of multimedia Experience through sensory effects
939
Improving the Quality of Natural Language Requirements Specifications through Natural Language Requirements Patterns
940
Improving the quality of object-oriented programs
941
Improving the quality of overlapping community detection through link addition based on topic similarity
942
Improving the Quality of Prediction Intervals Through Optimal Aggregation
943
Improving the quality of QUS imaging using full angular spatial compounding
944
Improving the quality of remotely sensed derived land cover maps by incorporating mixed pixels in various stages of a supervised classification process
945
Improving the quality of schottky contacts on zno microwires using Cu-contained silver paste electrode
946
Improving the Quality of Self-Organizing Maps by Self-Intersection Avoidance
947
Improving the quality of semantic relationships extracted from massive user behavioral data
948
Improving the quality of service based on route stability in MANETs Using Dynamic Source routing protocol
949
Improving the quality of service in behavioural-based mobile robotic applications
950
Improving the quality of service in dead spots areas of UMTS networks
951
Improving the Quality of Service of Fault Detection in Distributed Platforms under Adverse Network Conditions
952
Improving the quality of service routing in OLSR protocol
953
Improving the quality of shortwave broadcast reception indoors by using an anti-fading probe antenna
954
Improving the quality of streaming video through dynamic chrominance adjustment
955
Improving the quality of student learning: a systems approach
956
Improving the quality of sub-1.5-nm-thick oxynitride gate dielectric for FETs with narrow channel and shallow-trench isolation using radical oxygen and nitrogen
957
Improving the Quality of Syntheric Quartz
958
Improving the quality of systems and domain analysis through object class congruency
959
Improving the quality of tags using state transition on progressive image search and recommendation system
960
Improving the quality of technical data for developing case based reasoning diagnostic software for aircraft maintenance
961
IMPROVING THE QUALITY OF TEST EDUCATION
962
Improving the Quality of the Community Relations Knowledge Using Implicit Connections
963
Improving the quality of the evaporated Ge nanodot arrays by laser annealing
964
Improving the quality of the reconstructed image based on the dynamic local mesh refinement
965
Improving the quality of three products through improved testing: A case study
966
Improving the Quality of Web-GIS Modularity Using Aspects
967
Improving the Quality of Word Alignment by Integrating Pearson´s Chi-Square Test Information
968
Improving the quantitative ability of contrast enhanced ultrasound perfusion imaging: effect of contrast administration rate and imaging plane orientation
969
Improving The Quantitative Accuracy And Resolution Of Thoracic SPECT Imaging
970
Improving the quantum efficiency of erbium-doped fiber laser by using a low-loss tipped fiber splicing process
971
Improving the Quickprop algorithm
972
Improving the R&D-production interface in industrial companies
973
Improving the radar detection ange of low flying aircraft in clutter with ultra-widband short pulses and active side lobe reduction
974
Improving the radar target classification results by decision fusion
975
Improving the radial dopant distribution in silica optical fibres
976
Improving the Radiated Immunity of the Strip-Lines Using a Novel Hybrid EBG Structure
977
Improving the radiation and matching characteristics of antenna arrays for satellite communication with moving vehicles
978
Improving the radiation burn-out susceptibility of N-channel power MOSFETs
979
Improving the radiation hardness properties of silicon detectors using oxygenated n-type and p-type silicon
980
Improving the radiation hardness properties of silicon detectors using oxygenated n-type and p-type silicon
981
Improving the radiation properties of a piezoceramic air ultrasound transducer by adding a ceramic membrane
982
Improving the radio link layer QoS performance for Bluetooth real-time video communications
983
Improving the rail industry´s Vehicle-Track Interaction Strategic Model (VTISM) to include Wheelset Management Modelling
984
Improving the ramping up behavior of TCP slow start
985
Improving the random forest algorithm by randomly varying the size of the bootstrap samples
986
Improving the range of ultrawideband transmission using RAKE receivers
987
Improving the range/time sidelobes of large bandwidth discontinuous spectra HF radar waveforms
988
Improving the Ranking Capability of the Hyperlink Based Search Engines using Heuristic Approach
989
Improving the Rapid Application Development process model
990
Improving the Rapidity of Nonlinear Tracking Differentiator via Feedforward
991
Improving the rate-distortion performance of DPCM
992
Improving the Rate-Distortion Performance of DPCM Using Multirate Processing With Application in Low-Rate Image Coding
993
Improving the Rate-Distortion Performance of the Transform Domain Refinement Codec by the Use of Decoder-Driven Adaptive Modes
994
Improving the rates in wireless relay systems through superposition coding
995
Improving the RBF neural network under Stein loss and its application to the credit score
996
Improving the Reactive Power Capability of the DFIG-Based Wind Turbine During Operation Around the Synchronous Speed
997
Improving the read range of RFID sensors
998
Improving the Readability of Clustered Social Networks using Node Duplication
999
Improving the readability of time-frequency and time-scale representations by the reassignment method
1000
Improving the reading from screen