بر اساس عنوان

1
Design projects on automotive controls - developing an automation lab for senior projects
2
Design propagation in kinematics of mechanical systems
3
Design proposal for hydrogen refueling infrastructure deployment in the Northeastern United States
4
Design proposal of a connection system for ITER in-vessel magnetic sensors
5
Design prospect of remountable high-temperature superconducting magnet
6
Design protection and copyright issues for small textile firms
7
Design protocol data and novel design decisions
8
Design protocols for time-dependent finite impulse response digital filters based on regression analysis of Fourier transform infrared interferograms
9
Design rainfall estimation in South Africa using Bartlett–Lewis rectangular pulse rainfall models
10
Design rationale and intended use of a short optical stylet for routine fiberoptic augmentation of emergency laryngoscopy
11
Design rationale of weld-bonded joints
12
Design rationale: Concepts, techniques, and use : Edited by Thomas P. Moran and John M. Carroll, Lawrence Erlbaum Associates, Publishers, Mahwah New Jersey, USA, 1996, 0-8058-1566-X[cloth] 496pp. $99.95 USD, 0-8058-1567-8[paper] 496pp. $49.95 USD
13
Design rationalization and the logic of design: a case study
14
Design recommendations for a multi-effect distillation plant connected to a double-effect absorption heat pump: A solar desalination case study Original Research Article
15
Design recommendations for bond between GFRP/steel wire composite rebars and concrete
16
Design recommendations for heat discharge systems in walls
17
Design recommendations for solar organic Rankine cycle (ORC)–powered reverse osmosis (RO) desalination
18
DESIGN RECOMMENDATIONS FOR SUBSURFACE FLOW CONSTRUCTED WETLANDS FOR NITRIFICATION AND DENITRIFICATION
19
DESIGN RECOMMENDATIONS FOR SUBSURFACE FLOW CONSTRUCTED WETLANDS FOR NITRIFICATION AND DENITRIFICATION
20
Design recommendations for the strengthening of reinforced concrete beams with externally bonded composite plates
21
Design refinement of synchronous reluctance motors through finite-element analysis
22
Design related aspects in advanced nuclear fission plants
23
design Reliability Analysis of Cold-Formed Thin-Walled Steel Members with Lipped Channel Sections Considering Distortional Buckling
24
Design Remote Power Control I/O Data Acquisition System and Control on Home Automation
25
Design representation
26
Design requirements and first results of an LHC adequate analogue block for the CMS pixel detector
27
Design requirements and first results of an LHC adequate analogue block for the CMS pixel detector
28
Design Requirements and Options for Final Focusing Superconducting Magnets of Heavy Ion Drivers
29
Design requirements for health care production control systems
30
Design requirements for health care production control systems
31
Design requirements for medium-sized wind turbines for remote and hybrid power systems
32
DESIGN REQUIREMENTS FOR PLATE GIRDERS WITH BOLTED TRANSVERSE STIFFENERS
33
Design requirements for SiC/SiC composites structural material in fusion power reactor blankets
34
Design requirements for the plasma edge control system in WENDELSTEIN 7-X
35
Design Requirements Management using an Ontological Framework
36
Design research of small long life CANDLE fast reactor
37
DESIGN RESEARCH ON RATIO an‎d PROPORTION LEARNING BY USING RATIO TABLE an‎d GRAPH WITH OKU TIMUR CONTEXT AT 7th GRADE
38
Design Research on Responsive Display Prototypes: Integrating Sensing, Information and Computation Technologies
39
Design research: building the knowledge base
40
Design reuse in a CAD environment — Four case studies
41
Design Reuse Methodology for Product Family Design
42
DESIGN REVIEW AND PUBLIC PREFERENCES: EFFECTS OF GEOGRAPHICAL LOCATION, PUBLIC CONSENSUS, SENSATION SEEKING, AND ARCHITECTURAL STYLES
43
Design rule of wavelength filter bandwidth and pulsewidth for ultimate spectral efficiency limited by crosstalk in DWDM systems
44
Design rules and operational optimization for rapid, contamination-free microfluidic transfer using monolithic membrane valves
45
Design rules for application specific dynamical systems
46
Design rules for highly parallel free-Space optical interconnects
47
Design rules for peptides with a, b-dehydro-residues: synthesis of a model peptide Boc-Ile-DAla-OCH3 and its crystal structures obtained from two different solvents
48
Design rules for reversible thermochromic mixtures
49
Design rules for robust capacitive sensors
50
Design rules for size-based cell sorting and sheathless cell focusing by hydrophoresis
51
Design Rules for Solvent Extraction
52
Design rules for web crippling of CFRP strengthened aluminium rectangular hollow sections
53
Design rules to minimize the effect of joule heating in Greek cross test structures
54
Design scenarios for flat panel photobioreactors
55
Design Scenarios: Enabling transparent parametric design spaces
56
Design selection criteria for discrimination/estimation for nested models and a binomial response
57
Design selection methodology for composite structures
58
Design sensitivity analysis and optimization for minimizing springback of sheet-formed part
59
Design sensitivity analysis and optimization for nonlinear buckling of finite-dimensional elastic conservative structures Original Research Article
60
Design sensitivity analysis and optimization for polymer sheet extrusion and mold filling processes
61
DESIGN SENSITIVITY ANALYSIS AND OPTIMIZATION OF AN ENGINE MOUNT SYSTEM USING AN FRF-BASED SUBSTRUCTURING METHOD
62
Design sensitivity analysis and optimization of interface shape for zoned-inhomogeneous thermal conduction problems using boundary integral formulation
63
Design sensitivity analysis and optimization of non-linear transient dynamics. Part I - sizing design
64
Design sensitivity analysis and optimization of non-linear transient dynamics. Part II - configuration design
65
Design sensitivity analysis and optimization of steady fluid-thermal systems Original Research Article
66
Design sensitivity analysis and optimization of the hydroforming process
67
Design sensitivity analysis and shape optimization of structural components with hyperelastic material Original Research Article
68
Design sensitivity analysis and topology optimization of displacement–loaded non-linear structures Original Research Article
69
Design sensitivity analysis for parameters affecting geometry, elastic–viscoplastic material constant and boundary condition by consistent tangent operator-based boundary element method
70
Design sensitivity analysis for sequential structural–acoustic problems
71
Design sensitivity analysis for the homogenized elasticity tensor of a polymer filled with rubber particles
72
Design sensitivity analysis in dynamic thermoviscoelasticity with implicit integratio
73
Design sensitivity analysis in large deformation elasto-plastic and elasto-viscoplastic problems
74
Design sensitivity analysis of a system under intact conditions using measured response data
75
Design sensitivity analysis of dynamic responses for a BLDC motor with mechanical and electromagnetic interactions
76
Design sensitivity analysis of nonlinear structures subjected to thermal loads
77
Design sensitivity analysis of sheet metal forming processes with a direct differentiation method
78
Design sensitivity analysis of structures based upon the singular value decomposition Original Research Article
79
Design sensitivity analysis with hypersingular boundary elements
80
Design sensitivity of post-buckling states including material constraints Original Research Article
81
Design sensitivity of reactive absorption units for improved dynamic performance and cleaner production: the NOx removal process
82
Design should help use of patientsʹ data
83
Design simulation and fabrication process of polyimide and polyimide/silica hybrid materials for Rib-type arrayed waveguide grating
84
Design simulation of twisted cord¯rubber structure using ProE/ANSYS
85
Design Software Failure Mode and Effect Analysis using Fuzzy TOPSIS Based on Fuzzy Entropy
86
Design space navigation in generative design systems
87
Design space optimization using a numerical design continuation method
88
Design spaces, measures and metrics for evaluating quality of time operators and consequences leading to improved algorithms by design - illustration to structural dynamics
89
Design specifications in the flowsheet simulation of complex solids processes
90
Design specifications of H2O2/kerosene bipropellant rocket system for space missions
91
Design stage confirmation of lifetime improvement for newly modified products through accelerated life testing
92
Design stage confirmation of lifetime improvement for newly modified products through accelerated life testing
93
Design standard issues for ITER in-vessel components
94
Design status and development strategy of China liquid lithium–lead blankets and related material technology
95
Design status and procurement activities of the High Voltage Deck 1 and Bushing for the ITER Neutral Beam Injector
96
Design status of an intense 14 MeV neutron source for cancer therapy
97
Design status of an intense 14 MeV neutron source for cancer therapy
98
Design status of EC system in ITER — design of reliable RF beam launching system
99
Design status of ITER visible/IR outer strike point view
100
Design status of the CMS forward pixel detector
101
Design status of the CMS forward pixel detector
102
Design status of the ITER ECRH upper launcher mm-wave system
103
Design storm prediction and hydrologic modeling using a web-GIS approach on a free-software platform
104
Design Strategies for Class A CMOS CCIIS
105
Design Strategies for Controlling Structural Instabilities
106
Design strategies for sequential choice experiments involving economic alternatives
107
Design strategies for source coupled logic gates
108
Design strategies for the geometric synthesis of Orthoglide-type mechanisms
109
Design strategies to improve soluble macromolecular delivery constructs
110
Design strategy and competitive advantage
111
Design strategy and development of spherical silicon solar cell with semi-concentration reflector system
112
Design strategy for a polymer electrolyte membrane fuel cell flow-field capable of switching between parallel and interdigitated configurations
113
Design strategy for biodegradable Fe-based alloys for medical applications
114
Design strategy for devices under high radiation field in J-PARC muon facility
115
Design strategy for devices under high radiation field in J-PARC muon facility
116
Design strength of axially loaded RC columns strengthened by steel caging
117
Design students test Cibatool modelling boards
118
Design studies for a long base-line neutrino beam
119
Design studies for a long base-line neutrino beam
120
Design studies for monolithic high temperature shift catalysts: Effect of operational parameters
121
Design studies for nonimaging light concentrators to be used in very high-energy gamma-ray astronomy
122
Design studies for nonimaging light concentrators to be used in very high-energy gamma-ray astronomy
123
Design studies of helical-type fusion reactor FFHR
124
Design studies of innovatively small fusion reactor based on biomass-fusion hybrid concept: GNOME
125
Design studies of IR-FEL system at IAE, Kyoto University
126
Design studies of IR-FEL system at IAE, Kyoto University
127
Design studies of low aspect ratio quasiomnigenous stellarators
128
Design studies of mobile applications with SOFC–heat engine modules
129
Design studies on compact four mirror laser resonator with mode-locked pulsed laser for 5 μm laser wire
130
Design studies on compact four mirror laser resonator with mode-locked pulsed laser for 5 μm laser wire
131
Design studies on nuclear properties on the Flibe blanket for helical-type fusion reactor FFHR
132
Design studies on sensors for the ATLAS Pixel Detector
133
Design studies on sensors for the ATLAS Pixel Detector
134
Design studies on three-dimensional issues for liquid blanket systems in helical reactor FFHR
135
Design studies special issue: expertise in design
136
Design study for a next generation B factory pixel vertex detector
137
Design study for a next generation B factory pixel vertex detector
138
Design study for ultraflat PCB-integrated inductors for low-power conversion applications
139
Design study of a 10 GeV electron accumulator ring for the PEARL project at RCNP Original Research Article
140
Design study of a fast spectrum zero-power reactor dedicated to source driven sub-critical experiments
141
Design study of a G-band FEL amplifier for application to cyclotron resonant heating in magnetic fusion reactors
142
Design study of a low-power, low-noise front-end for multianode silicon drift detectors
143
Design study of a low-power, low-noise front-end for multianode silicon drift detectors
144
Design study of a negative-ion-based neutral injector for the large helical device
145
Design study of a neutral beam injector for fusion DEMO plant at JAERI
146
Design study of a new antenna system for steering microwave beam in electron cyclotron heating/current drive system
147
Design study of a stand-alone desalination system powered by renewable energy sources and a pumped storage unit Original Research Article
148
Design study of a storage ring light source at Tohoku University
149
Design study of a storage ring light source at Tohoku University
150
Design study of a test stand for ITER gyrotron
151
Design study of a thin-septum magnet for slow extraction system of J-PARC 50 GeV ring
152
Design study of a thin-septum magnet for slow extraction system of J-PARC 50 GeV ring
153
Design study of a tritium transport package for future fusion reactors
154
Design study of a wide-angle infrared thermography and visible observation diagnostic on JT-60SA
155
Design study of an AC power supply system in JT-60SA
156
Design study of an adaptive Fuzzy-PD controller for pneumatic servo system
157
Design study of an ECRF antenna for JT-60SA
158
Design study of an in-flight projectile fragment separator for rare isotope beams
159
Design study of an optical cavity for a future photon collider at ILC
160
Design study of an optical cavity for a future photon collider at ILC
161
Design study of an ultra-compact superconducting cyclotron for isotope production
162
Design study of an ultra-compact superconducting cyclotron for isotope production
163
Design study of CANGAROO-III, stereoscopic imaging atmospheric Cherenkov telescopes for sub-TeV γ-ray detection
164
Design study of distributed pumping system using multilayer NEG strips for particle accelerators
165
Design study of distributed pumping system using multilayer NEG strips for particle accelerators
166
Design study of fusion DEMO plant at JAERI
167
Design study of hard X-ray tomography system to obtain a spatial resolution of 100 nm
168
Design study of high energy neutral particle measurements in a LHD
169
Design study of JT-60SA divertor for high heat and particle controllability
170
Design study of nuclear shielding and fuel cycle for steady-state tokamak device JT-60SU
171
Design study of plasma-facing components for JT-60SA
172
Design study of superconducting coils for the fusion DEMO plant at JAERI
173
Design study of the Compton backscattering photon beam facility at the Pohang light source
174
Design study of the Compton backscattering photon beam facility at the Pohang light source
175
Design study of the imaging beam line at J-PARC MLF, ERNIS
176
Design study of the imaging beam line at J-PARC MLF, ERNIS
177
Design study of the JT-60SA supervisory control system
178
Design study of the KAERI Compton X-ray source depending on the laser intensity in the linear or non-linear regime
179
Design study of the KAERI Compton X-ray source depending on the laser intensity in the linear or non-linear regime
180
Design study on a medium-energy beam-transport line for the JHF proton linac
181
Design study on a medium-energy beam-transport line for the JHF proton linac
182
Design study on power flattening to sodium cooled large-scale CANDLE burning core with using thorium fuel
183
Design study on small CANDLE reactor
184
DESIGN STUDY: INTEGER SUBTRACTION OPERATION TEACHING LEARNING USING MULTIMEDIA IN PRIMARY SCHOOL
185
Design support for the systematic integration of risk reduction into early chemical process design
186
Design Synthesis Framework for Dimensional Management in Multistage Assembly System
187
Design systems and paradigms
188
Design systems for gear elements made of cotton fiber-reinforced plastics
189
DESIGN TABLE FORMATION OF STEPPED IMPEDANCE PROTOTYPE FILTERS
190
Design Talk: Understanding the Roles of Usability Practitioners, Web Designers, and Web Developers in User-Centered Web Design, by Brenda Reeb. Chicago: Association of College and Research Libraries, 2008. 95p. $32.00. ISBN 978-0-8389-8502-1.
191
Design team stories: Exploring interdisciplinary use of 3D object models in practice
192
Design techniques and implementation of an 8-bit 200-MS/s interpolating/averaging CMOS A/D converter
193
Design techniques for EEPROMs embedded in portable systems on chips
194
Design techniques for low-power systems
195
Design techniques for low-voltage high-speed pseudo-differential CMOS trackand-hold circuit with low hold pedestal
196
Design Techniques for Orthogonal Modulated Filterbanks Based on a Compact Representation.
197
Design techniques for reducing the cogging torque in surface-mounted PM motors
198
Design techniques for reducing the impact of component variations on narrow-band low noise amplifiers
199
Design techniques for the control of discrete-time systems subject to state and control constraints
200
Design Techniques for Thermal Management in Switch Mode Converters
201
Design techniques for weakly constrained codes
202
Design the Conceptual Model of Teleconsultation System for Dental Diseases
203
Design the hyperchaotic cryptosystems via the Gerschgorin theorem
204
Design theory and dynamic analysis of a deployable boom
205
Design theory and experimental investigation of the low frequency and high power rare earth magnetostrictive flextensional transducer (I). Theoretical part
206
Design theory and optimization method of a hybrid composite rotor for an ultracentrifuge
207
Design Theory and Performance of 1-GHz CMOS Downconversion and Upconversion Mixers
208
Design theory education: how useful is previous design experience?
209
Design thermal values for unfired clay bricks
210
Design Through Making: An Introduction
211
Design through making: crafts knowledge as facilitator to collaborative new product development
212
design to generalize internal model control
213
Design trade-offs and rules for multiple energy level solar cells
214
Design transformation and prototyping using multiple viewpoints
215
Design type problems motivated by database theory
216
Design units — a layered approach for design driven software development
217
Design update, thermal and fluid dynamic analyses of the EU-HCPB TBM in vertical arrangement
218
Design variable tolerance effects on the natural frequency variance of constrained multi-body systems in dynamic equilibrium
219
Design variations of a polymer–enzyme composite biosensor for glucose: Enhanced analyte sensitivity without increased oxygen dependence
220
Design Verification and Testing of Power Supply System by Using Virtual Prototype
221
Design verification and validation in product lifecycle
222
Design Verification of FPGA Implementations
223
Design Verification of Heat Exchanger for Ballast Water Treatment
224
Design verification of the heating neutral beam port liner for the ITER vacuum vessel
225
Design VLSI Median Filter
226
Design wind force coefficients for open-topped oil storage tanks focusing on the wind-induced buckling
227
Design wind loads for a low-rise building taking into account directional effects
228
Design window for shield thermal energy storage for pulsed tokamak fusion reactors
229
Design window search using continuous evolutionary algorithm and clustering––its application to shape design of microelectrostatic actuator
230
Design With First-Order Controllers
231
design with fractional-order controllers
232
Design with shape grammars and reinforcement learning
233
Design with the climate in housing environments: an analysis in Northern Cyprus
234
DESIGN WITH THE SENSES AND FOR THE SENSES: AN ALTERNATIVE TEACHING MODEL FOR DESIGN STUDIO
235
Design with uncertain qualitative variables under imperfect knowledge
236
Design, actuation and control of an anthropomorphic robot arm
237
Design, ADMET, PASS Prediction and Molecular Docking Studies of Novel pyrazolo[3,4-d]pyrimidines for Prospective of Anti-Cancer Agents
238
Design, analyses, and field test of a 0.7 m conical shaped charge
239
Design, analysis and construction of a composite camera gimbal
240
Design, analysis and control of a new repulsive-type magnetic bearing system
241
Design, Analysis and Control of the 4 Fingers Rehabilitation Robot
242
Design, analysis and experimental validation of a robust nonlinear path following controller for marine surface vessels
243
Design, analysis and fabrication of a new MEMS scanning device actuator
244
Design, Analysis and Manufacturing of a Bone Cutting Ultrasonic Horn-Tool and Verification with Experimental Tests
245
DESIGN, ANALYSIS AND OPTIMIZATION OF V-DIPOLE AND ITS THREE-ELEMENT YAGI-UDA ARRAY
246
Design, analysis and performance of adhesively bonded composite patch repair of cracked aluminum aircraft panels
247
Design, analysis and realisation of a high-performance magnetic gear
248
Design, analysis and realization of tendon-based parallel manipulators
249
Design, Analysis and Simulation of a Linear Phase Distributed Amplifier
250
Design, analysis and testing of a smart fin
251
Design, Analysis and Testing of Flexurally Amplified Piezoactuator Based Active Vibration Isolation System For Micromilling
252
Design, analysis and testing of some parallel two-step W-methods for stiff systems Original Research Article
253
Design, analysis, and control of a low power joint for walking robots, by phasic activation of McKibben muscles
254
Design, Analysis, and Control of a Novel Linear Actuator
255
Design, Analysis, and Electrification of a Solar-Powered Electric Vehicle
256
Design, analysis, and evaluation of an improved scheme for ATM burst-level admission control
257
Design, Analysis, and Experimental Evaluation of a Double Coil Magnetorheological Fluid Damper
258
Design, analysis, and fabrication of a tri-axial cable system
259
Design, Analysis, and Implementation of a New Online Object Tracking Method Based on Sketch Kernel Correlation Filter (SHKCF)
260
Design, Analysis, and Implementation of an Improved High-Gain Quasi-Switched Boost Inverter
261
Design, analysis, and implementation of DVSR: a fair high-performance protocol for packet rings
262
Design, analysis, and optimization of composite leaf springs for light vehicle applications
263
Design, analysis, and optimization of composite leaf springs for light vehicle applications
264
Design, Analysis, and Real-Time Testing of a Controller for Multibus Microgrid System
265
Design, analysis, and stiffness optimization of a three degree of freedom parallel manipulator
266
Design, analysis, and synthesis of generalized single step single solve and optimal algorithms for structural dynamics
267
Design, assembly and operation of polymer electrolyte membrane fuel cell stacks to 1 kWe capacity
268
Design, assembly, and optical bench testing of a high-numericalaperture miniature injection-molded objective for fiber-optic confocal reflectance microscopy
269
Design, asymmetric synthesis, and evaluation of pseudosymmetric sulfoximine inhibitors against HIV-1 protease Original Research Article
270
Design, baseline characteristics, and preliminary clinical results of the Organization to Assess Strategies for Ischemic Syndromes–2 (OASIS–2) trial
271
Design, Build and Test an Unmanned Air Vehicle
272
Design, building and testing of a 10 kW superconducting induction heater
273
Design, calibration, and performance of the MINERvA detector
274
Design, calibration, and performance of the MINERvA detector
275
Design, characterisation and modelling of molecule-based magnetic materials. E-MRS Spring Meeting, Strasbourg, 2003
276
Design, Characterization and Application of N1,N1,N2,N2-Tetramethyl-N1,N2-bis(sulfo)ethane-1,2-diaminium Trifluoroacetate as a Novel Ionic-Liquid Catalyst for the Production of Polyhydroquinolines
277
Design, characterization and application of new ionic liquid 1-sulfopyridinium chloride as an efficient catalyst for tandem Knoevenagel–Michael reaction of 3-methyl-1-phenyl-1H-pyrazol-5(4H)-one with aldehydes Original Research Article
278
Design, characterization and beam test performance of different silicon microstrip detector geometries
279
Design, characterization and beam test performance of different silicon microstrip detector geometries
280
Design, characterization and in vitro evaluation of 5-aminosalicylic acid loaded N-succinyl-chitosan microparticles for colon specific delivery
281
Design, characterization and in-vitro evaluation of different cellulosic acrylic and methacrylic polymers loaded aceclofenac microspheres
282
Design, characterization and magnetic properties of Fe3O4-nanoparticle arrays coated with PEGylated-dendrimers
283
Design, characterization and testing of Ti-based multicomponent coatings for load-bearing medical applications
284
Design, chemical synthesis, and biological evaluation of novel triazolyl analogues of taranabant (MK-0364), a cannabinoid-1 receptor inverse agonist
285
Design, cloning and expression assay of oipA gene in a bicistronic vector harboring mice IL-18 gene: potential implications for Helicobacter pylori vaccine investigations
286
Design, Cloning and In silico Analysis of Efficient siRNAinducing Cassette for Silencing Wheat γ-gliadins
287
Design, combinatorial chemical synthesis and in vitro characterization of novel urea based gelatinase inhibitors
288
Design, commissioning and performance of the PIBETA detector at PSI
289
Design, commissioning and performance of the PIBETA detector at PSI
290
Design, Construct and Evaluation of a Single Row Hand-Pushed Mechanical Weed Control Machine
291
Design, construction and assessment of a field-deployable laser-induced breakdown spectrometer for remote elemental sensing
292
Design, construction and assessment of a field-deployable laser-induced breakdown spectrometer for remote elemental sensing
293
Design, Construction and Calibration of a Laser Ionization Time-of-Flight Mass Spectrometer
294
Design, construction and calibration of a portable multi sample DTA setup
295
Design, Construction and Calibration of Automatic Street Light Controller Using Light Dependent Resistor (LDR)
296
Design, construction and characterisation of a synthetic promoter library for fine-tuned gene expression in actinomycetes
297
Design, Construction and Cloning of Truncated ORF2 and tPAsp-PADRE-Truncated ORF2 Gene Cassette From Hepatitis E Virus in the pVAX1 Expression Vector
298
Design, Construction and Cloning of Truncated ORF2 and tPAsp-PADRE-Truncated ORF2 Gene Cassette From Hepatitis E Virus in the pVAX1 Expression Vector
299
Design, Construction and Comparison of a Sensorless Driver Circuit for Switched Reluctance Motor
300
Design, construction and cooling system performance of a prototype cryogenic stopping cell for the Super-FRS at FAIR
301
Design, construction and cooling system performance of a prototype cryogenic stopping cell for the Super-FRS at FAIR
302
Design, Construction and Evaluation of 1a/JFH1 HCV Chimera by Replacing the Intergenotypic Variable Region
303
Design, Construction and Evaluation of a Fan Speed Controller in a Forced Convection Solar Dryer to Optimize the Overall Energy Efficiency
304
Design, construction and evaluation of a flat plate collector for heating the anaerobic digestion reservoir water
305
Design, construction and evaluation of a portable limb shaker for almond tree
306
Design, Construction and Evaluation of Cardiac Massage Facilitator Device on Cardio Pulmonary Resuscitation: an Innovation Report
307
Design, Construction and Evaluation of Chrysanthemum Flower Stem Cleaner Machine
308
Design, Construction and Evaluation of Local Exhaust Ventilation System for the Control of Total Dust and Crystalline Silica in a Tile Manufacturing Factory
309
Design, construction and field test of hot -box solar cookers for African Sahel region
310
Design, Construction and Immunogenicity Assessment of pEGFP-N1-KMP11-GP96 (Fusion) as a DNA Vaccine Candidate against Leishmania major Infection in BALB/c Mice
311
Design, Construction and Implementation of the Native Intelligent Vertical Parking System with the Possibility of Controlling it by Rs-485 Network Under Modbus Protocol by Delta-Plc
312
Design, construction and operation of flux measurement systems using the conditional sampling technique
313
Design, construction and operation of spherical solar cooker with automatic sun tracking system
314
Design, Construction and Performance Evaluation of the Walnut Cracking Machine
315
Design, construction and performance of a large GEM-TPC prototype
316
Design, construction and performance of a large GEM-TPC prototype
317
Design, construction and performance of a large tornado simulator for wind engineering applications
318
Design, construction and performance of a large tornado simulator for wind engineering applications
319
Design, construction and performance of a portable handheld electrohydrodynamic multi-needle spray gun for biomedical applications
320
Design, construction and performance of all niobium superconducting radio frequency electron gun
321
Design, construction and performance of all niobium superconducting radio frequency electron gun
322
Design, construction and performance of Dai Omega, a large solid-angle axial-focusing superconducting surface-muon channel
323
Design, construction and performance of Dai Omega, a large solid-angle axial-focusing superconducting surface-muon channel
324
Design, construction and performance of one-dimensional lead foil parallel plate and fan-beam collimators for gamma ray imaging
325
Design, construction and performance of one-dimensional lead foil parallel plate and fan-beam collimators for gamma ray imaging
326
Design, construction and performance of the most efficient biomass producing E. coli bacterium
327
Design, construction and performance prediction of integrated solar roof collectors using finite element analysis
328
Design, construction and performance testing of a solar dryer for agroindustrial by-products
329
Design, Construction and Production of Small Scale Energy Generation Plant using Indigenous Resources
330
Design, construction and study of a continuously fed ohmically heated reactor for powdered solid sample digestion
331
Design, construction and study of a hybrid solar food processor in the climate of Costa Rica
332
Design, Construction and Testing of a Dry Sand Sieving Machine
333
Design, construction and testing of an air-cycle refrigeration system for road transport
334
Design, construction and tests of a crystal bender which provides constant position of the central part of the crystal
335
Design, construction and tests of a crystal bender which provides constant position of the central part of the crystal
336
Design, construction and tests of the ICARUS T600 detector
337
Design, construction and tests of the ICARUS T600 detector
338
Design, construction and the first plasma experiments in the Large Helical Device
339
Design, construction and tuning of S-band coupler for electron linear accelerator of institute for research in fundamental sciences (IPM E-linac)
340
Design, construction and tuning of S-band coupler for electron linear accelerator of institute for research in fundamental sciences (IPM E-linac)
341
Design, construction and use of tissue equivalent proportional counters : image and image (Editors). Nuclear Technology Publishing, Ashford, Kent, U.K. (1995) ISBN 1 870965 45 0, 107 pp. U.K. £37.00, U.S.$70.30 outside U.K. Published as Radiation Protect
342
Design, construction and validation of a computer controlled system for functional loading of soft tissue
343
Design, Construction, and Analysis of a Novel Class of Self-Folding RNA
344
Design, construction, and energy of sustainable solar dryers in Jipijapa Canton
345
Design, Construction, and Evaluation of an Intelligent Frost Forecasting and Warning System
346
Design, construction, and expression of recombinant human interferon beta gene in CHO-s cell line using EBV-based expression system
347
Design, construction, and operation of an actively controlled deep-sea CO2 enrichment experiment using a cabled observatory system
348
Design, construction, and operation of SciFi tracking detector for K2K experiment
349
Design, construction, and operation of SciFi tracking detector for K2K experiment
350
Design, construction, and performance of a magnetically shielded room for a neutron spin echo spectrometer
351
Design, construction, and performance of a magnetically shielded room for a neutron spin echo spectrometer
352
Design, construction, and performance of plastic heat exchangers for sub-Kelvin use Original Research Article
353
Design, construction, operation and performance of a Hadron Blind Detector for the PHENIX experiment
354
Design, construction, operation and performance of a Hadron Blind Detector for the PHENIX experiment
355
Design, construction, operation and performance of the Hadron Blind Detector for the PHENIX experiment at RHIC
356
Design, construction, operation and performance of the Hadron Blind Detector for the PHENIX experiment at RHIC
357
Design, construction, performance evaluation and economic analysis of an integrated collector storage system
358
Design, demonstration and performance of a versatile electrospray aerosol generator for nanomaterial research and applications.
359
Design, demonstrations and sustainability impact assessments for plug-in hybrid electric vehicles
360
Design, Development and Evaluation of an Orange Sorter Based on Machine Vision and Artificial Neural Network Techniques
361
Design, Development and Evaluation of CNG Fuel System for Using in Diesel Engine of Tractor
362
Design, development and experiment of a 1.5 T MgB2 superconducting test magnet Original Research Article
363
DESIGN, DEVELOPMENT an‎d FABRICATION OF A MIST SPRAY DIRECT EVAPORATIVE COOLING SYSTEM an‎d ITS PERFORMANCE EVALUATION
364
Design, development and implementation of a global information warehouse: a case study at IBM
365
DESIGN, DEVELOPMENT AND IMPLEMENTATION OF AN ELECTRICAL CONTROLLER FOR A SOLAR-ELECTRICAL COLLECTOR
366
Design, Development and In Vitro Characterization of Self Emulsifying Drug Delivery System for Irbesartan
367
Design, development and performance evaluation of a latent heat storage unit for evening cooking in a solar cooker
368
Design, development and performance evaluation of a new-type fruit vegetable washer
369
Design, development and performance evaluation of a tractor-mounted bevameter
370
Design, development and performance monitoring of a photovoltaic-thermal (PVT) air collector
371
Design, development and performance testing of a new natural convection solar dryer
372
Design, development and synthesis of mixed bioconjugates of piperic acid–glycine, curcumin–glycine/alanine and curcumin–glycine–piperic acid and their antibacterial and antifungal properties Original Research Article
373
Design, development and technological advancement in the biomass cookstoves: A review
374
Design, Development and Test of a Practical Train Energy Optimization using GAPSO Algorithm
375
Design, Development and Testing of a Combined Savonius and Darrieus Vertical Axis Wind Turbine
376
Design, development and testing of a double reflector hot box solar cooker with a transparent insulation material
377
Design, development and testing of a portable parabolic solar kitchen
378
Design, development and testing of a turning dynamometer for cutting force measurement
379
Design, development and testing of hand-operated decorticator for Jatropha fruit
380
Design, Development and Testing of Low Capital and Operational Cost Shrub Cutting Machine
381
Design, development and testing of multi-functional non-linear ultrasonic instrumentation for the detection of defects and damage in CFRP materials and structures
382
Design, development, and application of LANDIS-II, a spatial landscape simulation model with flexible temporal and spatial resolution
383
Design, development, and application of LANDIS-II, a spatial landscape simulation model with flexible temporal and spatial resolution
384
Design, development, and calibration of a high energy proton telescope for space radiation studies
385
Design, development, and calibration of a high energy proton telescope for space radiation studies
386
Design, Development, and Commissioning of a Supervisory Control and Data Acquisition (SCADA) Laboratory for Research and Training
387
Design, Development, and Deployment of a Web-Based Registry for Cardiovascular Intensive Care Unit (CVICU)
388
Design, development, and operation of a fiber-based Cherenkov beam loss monitor at the SPring-8 Angstrom Compact Free Electron Laser
389
Design, development, and operation of a fiber-based Cherenkov beam loss monitor at the SPring-8 Angstrom Compact Free Electron Laser
390
Design, docking, and synthesis of novel indeno[1,2-c]isoquinolines for the development of antitumor agents as topoisomerase I inhibitors
391
Design, DSP implementation, and performance of artificial-intelligence-based speed estimators for electromechanical drives
392
Design, Effectiveness, Limitations and Future Perspectives of CAR-T Cells: A Review Article
393
Design, elaboration and characterization of a Ni–MH battery prototype
394
Design, Evaluation and Comparative Study of Pulsatile Release from Tablet and Capsule Dosage Forms
395
Design, evaluation and implementation of a busbar differential protection relay immune to the effects of current transformer saturation
396
Design, evaluation and optimisation of cutter path strategies when high speed machining hardened mould and die materials
397
Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging
398
Design, evaluation, and sustainability of private schools for the poor: the Pakistan urban and rural fellowship school experiments
399
Design, execution, interpretation, and reporting of economic evaluation studies in obstetrics
400
Design, experimental investigation and analysis of a solar drying system
401
Design, Expression and Purification of Strongyloides stercoralis IgG4 Immunoreactive Protein (NIE) in Escherichia coli
402
DESIGN, FABRICATION AND ANALYSIS OF DIFFERENT FORM DESIGNS FOR A CANTILEVER BEAM
403
Design, fabrication and analysis of germanium: silicon solar cell in a multi-junction concentrator system
404
Design, fabrication and characterisation of strained Si/SiGe MOS transistors
405
Design, fabrication and characterization of an 8-in. X-HPD
406
Design, fabrication and characterization of an 8-in. X-HPD
407
Design, fabrication and characterization of drug delivery systems based on lab-on-a-chip technology
408
Design, fabrication and characterization of sesamol loaded polymeric nanoparticles: In vivo hepatoprotective potential in Wistar rats
409
Design, fabrication and characterization of silk fibroin-HPMC-PEG blended films as vehicle for transmucosal delivery
410
Design, fabrication and commissioning of the KSTAR TF current feeder system
411
Design, Fabrication and Evaluation of Electric Forage Chopper with Adjustable Helix Angle
412
Design, fabrication and evaluation of intelligent sulfone-selective polybenzimidazole nanofibers
413
Design, fabrication and experimental results of a multi-purpose Panofsky magnet
414
Design, fabrication and experimental results of a multi-purpose Panofsky magnet
415
Design, Fabrication and Experimental Study of Heat Transfer Characteristics of a Micro Heat Pipe
416
Design, fabrication and installation of cryogenic target system for 14 MeV neutron irradiation on superconducting magnet materials
417
Design, fabrication and installation of the lower divertor for DIII-D
418
Design, Fabrication and Intelligent Control of the Gripper Based on SMA Actuators
419
Design, Fabrication and Measurement of Two planar Micro-strip Antennas for UWB Applications with Linear Polarization at Base band data Transmission
420
Design, Fabrication and Measurement of Two-Layered Quadruple-Band Microwave Metamaterial Absorber
421
Design, fabrication and optical characterization of GaAs photonic crystal nanocavity lasers with InAs quantum dots gain wafer-bonded onto Si substrates
422
Design, Fabrication and Parametric Study of Bulk Current Injection Probe and Its Calibration Fixture
423
Design, fabrication and performance analysis of a 200 W PEM fuel cell short stack
424
Design, fabrication and performance analysis of an improved solar still Original Research Article
425
Design, fabrication and performance evaluation of a hybrid photovoltaic thermal (PVT) double slope active solar still Original Research Article
426
Design, fabrication and performance of a hybrid photovoltaic/thermal (PV/T) active solar still
427
Design, fabrication and performance of the 10-in. TOM HPD
428
Design, fabrication and performance of the 10-in. TOM HPD
429
Design, Fabrication and Performance Study of Co-Pyrolysis System for Production of Liquid Fuel from Jatropha Cake with Polystyrene Waste
430
Design, fabrication and performance test of a planar array module-type micro fuel cell stack
431
Design, fabrication and performance tests for a polymer-based flexible flat heat pipe
432
Design, fabrication and properties of layered SiC/TiC ceramic with graded thermal residual stress
433
Design, fabrication and test of a discrete-foil-type superconducting power supply Original Research Article
434
Design, fabrication and test of a microfluidic nebulizer chip for desorption electrospray ionization mass spectrometry
435
Design, Fabrication and Testing of A Fonio Dehusking Machine
436
Design, fabrication and testing of a helium cooled module
437
Design, fabrication and testing of a PMMA-based passive single-cell and a multi-cell stack micro-DMFC
438
Design, fabrication and testing of an improved high heat flux element, experience feedback on steady state plasma facing components in Tore Supra
439
Design, fabrication and testing of superconducting DC reactor for 1.2 kV/80 A inductive fault current limiter
440
Design, fabrication and testing of UHV compatible high power RF devices for lower hybrid current drive system on SST-1 tokamak
441
Design, fabrication and vapor characterization of a microfabricated flexural plate resonator sensor and application to integrated sensor arrays
442
Design, fabrication techniques and test results of 1.2 kV/80 A inductive fault current limiter by using conduction-cooled system Original Research Article
443
Design, fabrication, and analysis of chirped multilayer mirrors for reflection of extreme-ultraviolet attosecond pulses
444
Design, Fabrication, and Assessment of a Hydrodynamic Reactor for Biodiesel Production
445
Design, Fabrication, and Experimental Study of a Low-cost and Accurate Weather Station Using a Microcontroller System
446
Design, fabrication, and implantation of tube-shaped devices for the treatment of salivary duct diseases
447
Design, fabrication, and initial testing of a miniature PEM fuel cell with micro-scale pyrolyzed carbon fluidic plates
448
Design, Fabrication, and Performance Evaluation of Four-reflector Solar Baking Oven
449
Design, fabrication, and testing of an integrated Si-based light modulator
450
Design, fabrication, and testing of double negative metamaterials
451
Design, fabrication, back-to-back test of 14200-hp two-pole cylindrical-rotor synchronous motor for ASD application
452
Design, fabrication, characterisation and application of nanoelectrode arrays
453
Design, Fabrication, Evaluation and Calibration of an Improvised Soil Permeameter for Measurement of Soil Hydraulic Conductivity
454
Design, fabrication, installation and testing of in-vessel control coils for DIII-D
455
Design, fabrication, testing and mechanical analysis of bulk-micromachined flowmeters
456
Design, Formulation and Evaluation of an Oral Gel from Punica Granatum Flower Extract for the Treatment of Recurrent Aphthous Stomatitis
457
Design, Formulation and Evaluation of Its Physiochemical Properties of Acetaminophen, Ibuprofen and Caffeine as Effervescent Tablet
458
Design, Formulation and Evaluation of Physicochemical Properties of Valacy-clovir Effervescent Tablet
459
Design, Formulation and Physicochemical Evaluation of Acetaminophen Effervescent Tablets
460
Design, Formulation and Physicochemical Evaluation of Clotrimazole Chewing Gum
461
Design, Formulation and Physicochemical Evaluation of Dimenhydrinate Orally Disintegrating Tablets
462
Design, formulation, and evaluation of a herbal gel contains melissa, sumac, licorice, rosemary, and geranium for treatment of recurrent labial herpes infections
463
Design, Formulation, and Physicochemical Evaluation of Montelukast Orally Disintegrating Tablet
464
Design, formulation, and physicochemical evaluation of periodontal propolis mucoadhesive gel
465
Design, formulation, and physicochemical evaluation of periodontal propolis mucoadhesive gel
466
Design, Formulation, and Physicochemical Evaluation of Vaginal Cream Containing Eucalyptus camaldulensis, Viola odorata, and Mentha piperita extracts for Prevention and Treatment of Trichomoniasis
467
Design, generation and stress analysis of face-gear drive with helical pinion Original Research Article
468
Design, generation and TCA of new type of asymmetric face-gear drive with modified geometry Original Research Article
469
Design, generation, and stress analysis of two versions of geometry of face-gear drives
470
Design, implementation and application of distributed order PI control
471
Design, implementation and evaluation of a QoS-aware transport protocol
472
Design, Implementation and Evaluation of a Student Mentoring Program for Pharmacy Students Based on Facilitation by the Pharmacist Assistant Website at the School of Pharmacy of Ahvaz Jundishapur University of Medical Sciences
473
Design, Implementation and Evaluation of a Systematic Review Course for Medical Students
474
Design, Implementation and Evaluation of Multi-terminal Binary Decision Diagram based Binary Fuzzy Relations
475
Design, Implementation and Evaluation of Student-centric learning in Physiology
476
Design, implementation and experimental evaluation of an end-to-end vertical handover scheme on NCTUns simulator
477
Design, implementation and methods for the manufacture of components of a two-dimensional X-ray detector
478
Design, implementation and methods for the manufacture of components of a two-dimensional X-ray detector
479
Design, Implementation and Optimal Control of a Series Robot Based on Fuzzy Logic Method
480
Design, Implementation and Performance Analysis of 4-bit Full Ripple Carry Adder Using Adibatic Logic in 45nm CMOS Sub-micron Technology
481
Design, Implementation and Performance Analysis of Low Power, Low Energy Adder Using Adibatic Logic in 45nm CMOS Sub-micron Technology
482
Design, implementation and performance evaluation of a new digital distance relaying algorithm
483
Design, implementation and performance study of reliable transactions in X.500 directory service
484
Design, Implementation and Preliminary Testing of a Novel Orthosis for Reducing Erector Spinae Muscle Activity, and Improving Balance Control for Hyperkyphotic Elderly Subjects
485
Design, implementation and test of the XSC extreme shape controller in JET
486
Design, Implementation and Testing of a Vision System for Small Unmanned Vertical Take off and Landing Vehicles with Strict Payload Limitations
487
Design, implementation and testing of an intelligent knowledge-based system for the supervisory control of a hot rolling mill
488
Design, Implementation and Use of a Remote Network Lab with Multiple Users Support as an Aid Teaching Computer Networks
489
Design, implementation and validation of a real-time digital simulator for protection relay testing
490
Design, Implementation, and Characterization of a Folded Spot-Array Generator for a Modulator-Based Free-Space Optical Interconnect
491
Design, implementation, and evaluation of a diabetes educational game for the pharmacy students: A parallel-group study
492
Design, Implementation, and Evaluation of a Medical Education Fellowship Program for the Faculty Members of Kerman University of Medical Sciences Based on the Kirkpatrick Model
493
Design, implementation, and evaluation of a methodology for automatic stemmer generation
494
design, implementation, and evaluation of a short-term research skills training course for clinical faculty members: a new experience at kerman university of medical sciences
495
Design, Implementation, and Evaluation of Educational Program in Oral Health for Midwives and Other Antenatal Care Providers in Iran
496
Design, Implementation, and Evaluation of Online Open-Book Exams: Insights from Medical Students’ Perspectives
497
Design, Implementation, and Evaluation of Physicians Empowerment Course for Evidence-Based MRI Prescription at Bushehr University of Medical Sciences in 2021
498
design, implementation, and evaluation of physicians empowerment course for evidence-based mri prescription at bushehr university of medical sciences in 2021
499
Design, implementation, and evaluation of principles of writing biomedical research paper course
500
Design, implementation, and evaluation of the audio/video distribution transport protocol (AVDTP) for high quality audio support over Bluetooth
501
Design, Implementation, and Evaluation of Virtual Training on Principles of Physical Medicine and Rehabilitation Based on the ADDIE Model for Medical Students During the COVID-19 Pandemic
502
Design, implementation, and evaluation of Youth Peer Support Training to improve quality of life and stress among homebound and bedridden older adults
503
Design, implementation, and optimization of MEGAlibʹs image reconstruction tool Mimrec
504
Design, implementation, and optimization of MEGAlibʹs image reconstruction tool Mimrec
505
Design, implementation, and performance analysis of the WorldFIP/ATM local bridge
506
Design, implementation, and performance evaluation of a 4-DOF parallel robot
507
Design, implementation, and performance evaluation of a detection-based adaptive block replacement scheme
508
Design, implementation, and performance measurement of a native-mode ATM transport layer (extended version)
509
Design, implementation, and quality control in the Pathways American-Indian multicenter trial
510
Design, implementation, and testing of a single axis levitation system for the suspension of a platform
511
Design, innovation and the boundaries of the firm
512
Design, installation and preliminary testing of a permeable reactive barrier for diesel fuel remediation at Casey Station, Antarctica
513
Design, installation, and initial operating experience with line drop compensation at John Day powerhouse
514
Design, instrumentation and response characteristics of a multi-detector of CsI(Tl) scintillators mounted inside the Plastic Ball spectrometer
515
Design, instrumentation and response characteristics of a multi-detector of CsI(Tl) scintillators mounted inside the Plastic Ball spectrometer
516
Design, instrumentation, and the light response of the Heavy-Ion detector array inside the Big-Bite Spectrometer
517
Design, instrumentation, and the light response of the Heavy-Ion detector array inside the Big-Bite Spectrometer
518
Design, integration and feasibility studies of the Tore-Supra West divertor structure
519
Design, interface development and structural analyses of SPIDER vacuum vessel
520
Design, manufacture and analysis of a thermoplastic composite frame structure for mass transit
521
Design, Manufacture and Environmental Tests of Battery Pack for Spacecraft Freights
522
Design, manufacture and evaluation of a new and simple mechanism for transmission of power between intersecting shafts up to 135 degrees (Persian Joint)
523
Design, manufacture and evaluation of bending behaviour of composite beams embedded with SMA wires
524
Design, Manufacture and Evaluation of Oat De-Husking Machine
525
Design, manufacture and initial operation of the beryllium components of the JET ITER-like wall
526
Design, manufacture and materials; their interaction and role in engineering failures
527
Design, manufacture and testing of a new hybrid column
528
Design, manufacture and testing of fiberglass reinforced parabola trough for parabolic trough solar collectors
529
Design, manufacture and testing of the glow discharge electrodes for Wendelstein 7-X
530
Design, manufacture and testing of the IFMIF lithium target bayonet concept
531
Design, manufacture, and analysis of metal foam electrical resistance heater
532
Design, manufacture, and analysis of metal foam electrical resistance heater
533
Design, Manufacture, and Perform of First Electronic Seismic Sensor Dilatometer in Project of Tehran Metro line 6 as a Rapid Environmentally Friendly in-situ Test with Less Soil Disturbance
534
Design, manufacture, and test of a large bore cryogen-free magnet
535
Design, manufacture, and test of lightweight composite sandwich helmets
536
Design, manufacture, and test of lightweight composite sandwich helmets
537
Design, manufacture, stress analysis, and experimental tests of low-noise high endurance spiral bevel gears
538
Design, manufacturing and evaluation of the performance of steel like fiber reinforced elastomeric seismic isolators
539
Design, manufacturing and operation of a small turbojet-engine for research purposes
540
Design, manufacturing and operation of a small turbojet-engine for research purposes
541
Design, manufacturing and testing of a HALE-UAV structural demonstrator
542
Design, manufacturing and testing of gratings for synchrotron radiation
543
Design, manufacturing and testing of gratings for synchrotron radiation
544
Design, Manufacturing, and Evaluation a Greenhouse Misting System for Edible Mushroom Production
545
Design, manufacturing, and performance verification of a Roberts linkage for inertial isolation
546
DESIGN, MANUFACTURING, EVALUATION, AND ANALYSIS OF CNC CARVING MACHINE
547
Design, materials and R&D issues of innovative thermal contact joints for high heat flux applications
548
Design, materials selection and marketing of successful products
549
Design, measurement and correction of a pair of novel focusing undulators for the ALPHA-X project
550
Design, measurement and correction of a pair of novel focusing undulators for the ALPHA-X project
551
Design, Mechanism of Action, Bioavailability and Therapeutic Effects of Mn Porphyrin-Based Redox Modulators
552
Design, microfabrication and evaluation of robust high-performance superlyophobic surfaces
553
Design, microwave-assisted synthesis, and spasmolytic activity of 2-(alkyloxyaryl)-1H-benzimidazole derivatives as constrained stilbene bioisosteres
554
Design, Modeling and Adaptive Force Control of a New Mobile Manipulator with Backlash Disturbances
555
Design, modeling and characterization of microfluidic devices for ultrasonic manipulation
556
Design, Modeling and Experiments of An In-pipe Magnetostrictive Impact Drive Mechanism
557
Design, Modeling and Implementation of Pic Based Wireless Control System to Eliminate Blind Spots in Vehicle Side Mirrors
558
Design, Modeling and Manufacturing a New Robotic Gripper with High Load Bearing Capability and Robust Control of its Mechanical Arm
559
Design, modeling and simulations in the RACE project: First study for the development of a transport line
560
Design, modeling and simulations in the RACE project: First study for the development of a transport line
561
Design, modeling and synthesis of functionalized paromamine analogs
562
Design, modeling and synthesis of molecular tweezers with self-assembly properties
563
Design, modeling and testing of the Askaryan Radio Array South Pole autonomous renewable power stations
564
Design, modeling and testing of the Askaryan Radio Array South Pole autonomous renewable power stations
565
Design, modeling, and analysis of a feedstock logistics system
566
Design, Modeling, and Construction of a New Tactile Sensor for Measuring Contact-Force
567
Design, Modeling, and Experimental Response of Seismic Resistant Bridge Piers with Posttensioned Dissipating Connections
568
Design, modeling, and impedance control of a new in-pipe inspection robot equipped by a manipulator
569
Design, Modeling, and Performance Comparison of Feeding Techniques for a Microstrip Patch Antenna
570
Design, modeling, microfabrication and characterization of novel micro thermal conductivity detector
571
Design, modelling and analysis of a six component force balance for hypervelocity wind tunnel testing
572
Design, modelling and testing of magnetorheological (MR) dampers using analytical flow solutions
573
Design, modelling, synthesis and biological evaluation of peptidomimetic phosphinates as inhibitors of matrix metalloproteinases MMP-2 and MMP-8 Original Research Article
574
Design, monitoring and evaluation of a low energy office building with passive cooling by night ventilation
575
Design, new synthesis, and calcilytic activity of substituted 3H-pyrimidin-4-ones
576
Design, numerical analyses and test of a 0.1 MJ SMES with low stray field Original Research Article
577
Design, Numerical and Experimental Investigation of High Swirling Flow in an Annular Combustion Chamber
578
Design, Numerical Simulation and Experimental Investigation of Radial Inflow Micro Gas Turbine
579
Design, numerical simulation and experimental testing of a modified probe for measuring temperatures and humidities in two-phase flow
580
Design, Operation and Construction of a Large Rainfall Simulator for the Field Study on Acidic Barren Slope
581
Design, operation mode, and stress control capability of S-Gun magnetron for ac reactive sputtering
582
Design, operation, and motion characteristics of a precise piezoelectric linear motor
583
Design, optical characterization, and operation of large transmission gratings for the laser integration line and laser megajoule facilities
584
Design, optimisation and conversion-efficiency determination of a line-focus parabolic-trough solar-collector (PTC)
585
Design, optimization and controllability of an alternative process based on extractive distillation for an ethane–carbon dioxide mixture
586
Design, optimization and evaluation of glipizide solid self-nanoemulsifying drug delivery for enhanced solubility and dissolution
587
Design, optimization and evaluation of specific affinity adsorbent for oligopeptides
588
Design, Optimization and FEM Analysis of a Surface-Mounted Permanent-magnet Brushless DC Motor
589
Design, optimization and manufacturing of wood–plastic composite pallet
590
Design, Optimization and Prototype of a Multi-Phase Fractional Slot Concentrated Windings Surface Mounted on Permanent Magnet Machine
591
Design, Optimization of RF Spiral Inductors Using Scalable Compact and Accurate Models
592
Design, Optimization Process and Efficient Analysis for Preparation of Copolymer-Coated Superparamagnetic Nanoparticles
593
Design, optimization, and control of a linear tubular machine integrated with levitation and guidance for maglev applications
594
Design, optimization, and deployment of a waterworks pumping station control system
595
Design, optimization, and performance analysis of new photodiode structures for CMOS active-pixel-sensor (APS) imager applications
596
Design, optimization, and realization of a wire antenna with a 25:1 bandwidth ratio for terrestrial communications
597
Design, performance and analysis of thermal lag of the UFS1 twin-calorimeter chip for fast scanning calorimetry using the Mettler-Toledo Flash DSC 1
598
Design, performance and construction of a 2 MW ion beam test facility for plasma facing components
599
Design, performance and manufacturing analysis for a compact permeator
600
Design, performance and status of the CLEO III silicon detector
601
Design, performance and status of the CLEO III silicon detector
602
Design, performance and wavelength assignment of a wavelength division multiaccess protocol for optical fibre ring networks
603
Design, performance evaluation and optimization of a UAV
604
Design, polymerization, and properties of high performance thermoplastic polyurethane elastomers from seed-oil derived soft segments
605
Design, preparation and assessment of citrate-linked monosaccharide cellulose conjugates with elastase-lowering activity
606
Design, preparation and characterization of a novel BiFeO3/CuWO4 heterojunction catalyst for one-pot synthesis of trisubstituted imidazoles
607
Design, preparation and microwave absorbing properties of resin matrix composites reinforced by SiC fibers with different electrical properties
608
Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview
609
Design, preparation and testing of suitable probe-receptors for RNA biosensing
610
Design, Preparation, and Characterization of Novel ET Salts with Supramolecular Assembly. Sheet, Chain, and Pore Structures Based on Difluorotetraiodobenzene
611
Design, preparation, and durability of TiO2/SiO2 and ZrO2/SiO2 double-layer antireflective coatings in crystalline silicon solar modules
612
Design, preparation, characterization, and evaluation of NR4A1 agonist novel 6-mercaptopurine monohydrate loaded nanostructured lipid carriers suspension for enhanced solubility and invivo bioavailability
613
Design, process simulation and construction of an atmospheric dual fluidized bed combustion system for in situ CO2 capture using high-temperature sorbents
614
Design, processing and characterization of flexible hybrid coatings: A comparative evaluation
615
DESIGN, PRODUCE an‎d CONTROL OF A 2-DOF UPPER LIMB EXOSKELETAL ROBOT
616
Design, Production and Evaluation of Digital Educational Content Based on DDD-E Model: Depression Treatment in Traditional Persian Medicine
617
Design, Production and Molecular Structure of a New Family of Artificial Alpha-helicoidal Repeat Proteins (αRep) Based on Thermostable HEAT-like Repeats
618
Design, production and test of the BaBar SVT fanouts
619
Design, production and test of the BaBar SVT fanouts
620
Design, Production, and Evaluation of the Earth Well Model as a Valuable Tool in Electrical Safety Education Technology Using Kirkpatrick Model
621
Design, properties, and applications of protein micro- and nanoparticles
622
DESIGN, PROTOTYPING AND ANALYSIS OF A LOW-COST DISK PERMANENT MAGNET GENERATOR WITH RECTANGULAR FLAT-SHAPED MAGNETS
623
Design, prototyping and experimental testing of a chiral blade system for hydroelectric microgeneration
624
Design, R&D and assessment of performance of the JT-60SA upper divertor
625
Design, rationale, and baseline characteristics of the Prospective Pravastatin Pooling (PPP) project—A combined analysis of three large-scale randomized trials: Long-Term Intervention With Pravastatin in Ischemic Disease (LIPID), Cholesterol and Recurrent
626
Design, Realization and Measurements of Printed Patch Antenna with Circular Slots for UWB and IoT Applications
627
Design, realization and test of a rad-hard 2D-compressor and packing chip for high energy physics experiments
628
Design, realization and test of a rad-hard 2D-compressor and packing chip for high energy physics experiments
629
Design, science and naturalism
630
Design, self-assembly, and photophysical properties of pentameric metallomacrocycles: [M5(N-hexyl[1,2-bis (2,2:6,2"-terpyridin-4-yl)]carbazole)5][M = Fe(II), Ru(II), and Zn(II)]
631
Design, simplified cloning, and in-silico analysis of multisite small interfering RNA-targeting cassettes
632
Design, simulation and analysis of high-K gate dielectric FinField effect transistor
633
Design, simulation and application of inductors and transformers for SI RF ICS [Book Review]
634
Design, simulation and economic analysis of a stand-alone reverse osmosis desalination unit powered by wind turbines and photovoltaics Original Research Article
635
Design, simulation and evaluation of a new universal joint with intersecting angle up to 100 degrees for farm machineries
636
Design, simulation and experimental results for a novel type of two-layer 6/4 three-phase switched reluctance motor/generator
637
Design, Simulation and Fabrication of Microstrip Hairpin and Interdigital BPF for 2.25 GHz Unlicensed Band
638
DESIGN, SIMULATION AND IMPLEMENTATION OF A FUZZY-BASED MPP TRACKER UNDER VARIABLE INSOLATION AND TEMPERATURE CONDITIONS
639
Design, Simulation and implementation of active dualband dipole antenna using a series stub
640
Design, simulation and implementation of three-pole/four-pole topologies for active filters
641
Design, simulation and optimization of all-optical NOT/XOR logic gates for use in the new photonic crystal 42 encoder
642
Design, simulation and performance of a slow positron beam with secondary electron tagging for positron annihilation lifetime spectroscopy
643
Design, simulation and performance of a slow positron beam with secondary electron tagging for positron annihilation lifetime spectroscopy
644
Design, simulation and performance of a waste heat driven adsorption ice maker for fishing boat
645
Design, simulation and testing of an EHV metal-enclosed disconnector
646
Design, simulation of meshing, and contact stresses for an improved worm gear drive
647
Design, simulation, and performance of a draft tube spout fluid bed coating system for aerogel particles
648
Design, simulation, and prototype production of a through the road parallel hybrid electric motorcycle
649
Design, simulation, and testing of a novel hydraulic power take-off system for the Pelamis wave energy converter
650
Design, simulation, production and initial characterisation of 3D silicon detectors
651
Design, simulation, production and initial characterisation of 3D silicon detectors
652
Design, Simulation, Validation and Comparison of New High Step-up Soft Switched Converter for Fuel Cell Energy System
653
Design, spectrum measurements and simulations for a 238Pu α-particle irradiator for bystander effect and genomic instability experiments
654
Design, structural and spectroscopic elucidation of new nitroaromatic carboxylic acids and semicarbazones for the in vitro screening of anti-leishmanial activity
655
Design, structure and anion recognition of larger-rim functionalized oxacalix[2]arene[2]triazine hosts
656
Design, structure and luminescent properties of a novel two-dimensional Cd(II) coordination polymer constructed from in situ generated 1-methyl-2-(3H-[1–3]triazol-4-yl)-1H-benzoimidazole
657
Design, structure and properties of a novel 3D metal-organic framework constructed from N-donor ligand supporting Cd(II)-carboxylate layer
658
Design, structure, and properties of functional metal–ligand inorganic modules
659
Design, structure–activity relationship, and pharmacokinetic profile of pyrazole-based indoline factor Xa inhibitors
660
Design, syntheses and applications of chemical precursors to advanced ceramic materials in nanostructured forms
661
Design, syntheses and potentiating activities against methicillin resistant Staphylococcus aureus of cyclic analogs of LY301621
662
Design, syntheses, and antitumor activity of novel chromone and aurone derivatives Original Research Article
663
Design, syntheses, and biological evaluations of squamostolide and its related analogs Original Research Article
664
Design, syntheses, and structure–Activity relationships of indan derivatives as endothelin antagonists; new lead generation of non-peptidic antagonist from peptidic leads Original Research Article
665
Design, syntheses, and structure–activity relationships of novel NPY Y5 receptor antagonists: 2-{3-Oxospiro[isobenzofuran-1(3H),4′-piperidin]-1′-yl}benzimidazole derivatives
666
Design, synthesis and activity of novel derivatives of Oxybutynin and Tolterodine
667
Design, synthesis and antibacterial activity of novel 1,3-thiazolidine pyrimidine nucleoside analogues Original Research Article
668
Design, synthesis and antibacterial activity of novel andrographolide derivatives Original Research Article
669
Design, synthesis and antibacterial potential of 5-(benzo[d][1,3]dioxol-5-yl)-3-tert-butyl-1-substituted-4,5-dihydropyrazoles
670
Design, synthesis and anticancer activities of stilbene-coumarin hybrid compounds: Identification of novel proapoptotic agents Original Research Article
671
Design, synthesis and anticancer evaluation of novel thiazine, pyrimidine and pyridine derivatives
672
Design, Synthesis and Anticonvulsant Activity of 2-(2-Phenoxy) phenyl- 1,3,4-oxadiazole Derivatives
673
DESIGN, SYNTHESIS AND ANTIDIABETIC ACTIVITY OF SOME NEW 4-AMINO (OR 6-OXO)-2-METHYL/BENZYLTHIO (OR SUBSTITUTED AMINO) PYRIMIDINE DERIVATIVES
674
Design, synthesis and antifungal activity of a novel water soluble prodrug of antifungal triazole
675
Design, synthesis and antiinflammatory activity of novel phthalimide derivatives, structurally related to thalidomide
676
Design, synthesis and anti-influenza virus activities of terminal modified antisense oligonucleotides
677
Design, synthesis and antimalarial activity of a glyoxylylhydrazone library
678
Design, synthesis and antimalarial activity of benzene and isoquinoline sulfonamide derivatives
679
Design, synthesis and antimalarial activity of novel, quinoline-Based, zinc metallo-aminopeptidase inhibitors
680
Design, synthesis and antimalarial/anticancer evaluation of spermidine linked artemisinin conjugates designed to exploit polyamine transporters in Plasmodium falciparum and HL-60 cancer cell lines Original Research Article
681
Design, Synthesis and Antimicrobial Activity Evaluation of New Bisimidyl Sulfonamido Ketone Comprising Drug component
682
Design, synthesis and anti-microbial activity of 1H-pyrazole carboxylates
683
Design, synthesis and antimicrobial properties of non-hemolytic cationic α-cyclopeptoids Original Research Article
684
Design, synthesis and antimuscarinic activity of some imidazolium derivatives
685
Design, synthesis and anti-plasmodial evaluation in vitro of new 4-aminoquinoline isatin derivatives Original Research Article
686
Design, synthesis and antiproliferative activity of methyl 4-Iodo-1-β-D-ribofuranosyl-pyrazole-3-carboxylate and related compounds
687
Design, synthesis and antiproliferative activity of tripentones: A new series of antitubulin agents
688
Design, synthesis and antiproliferative activity of two new heteroannelated (−)-muricatacin mimics
689
Design, synthesis and antiproliferative properties of oligomers with chromophore units linked by amide backbones
690
Design, synthesis and antitubercular activity of diarylmethylnaphthol derivatives
691
Design, Synthesis and Antitubercular Evaluation of Novel Series of Pyrazinecarboxamide Metal Complexes
692
Design, synthesis and antitumor activities of novel 7-arylseleno-7-deoxydaunomycinone derivatives Original Research Article
693
Design, synthesis and antitumor evaluation of novel thalidomide dithiocarbamate and dithioate analogs against Ehrlich ascites carcinoma-induced solid tumor in Swiss albino mice Original Research Article
694
Design, synthesis and antiviral efficacy of a series of potent chloropyridyl ester-derived SARS-CoV 3CLpro inhibitors
695
Design, synthesis and binding affinities of novel non-peptide mimics of somatostatin/sandostatin®
696
Design, synthesis and binding affinity of 3′-fluoro analogues of Cl-IB-MECA as adenosine A3 receptor ligands
697
Design, synthesis and binding at cloned muscarinic receptors of N-[5-(1′-substituted-acetoxymethyl)-3-oxadiazolyl] and N-[4-(1′-substituted-acetoxymethyl)-2-dioxolanyl] dialkyl amines Original Research Article
698
Design, synthesis and bioactivities of novel diarylthiophenes: inhibitors of tumor necrosis factor-α (TNF-α) production Original Research Article
699
Design, synthesis and bioactivity evaluation of tribactam β lactamase inhibitors
700
Design, synthesis and biochemical evaluation of aC ring mimics as novel inhibitors of the enzyme estrone sulfatase (ES)
701
Design, Synthesis and Biological Activity of 4,6-disubstituted Pyridin- 2(1H)-ones as Novel Inhibitors of Soluble Epoxide Hydrolase
702
Design, synthesis and biological activity of a pyrrolo [2,1-c][1,4]benzodiazepine (PBD)-distamycin hybrid
703
Design, synthesis and biological activity of amidinobicyclic compounds (derivatives of DX-9065a) as factor Xa inhibitors: SAR study of S1 and aryl binding sites Original Research Article
704
Design, synthesis and biological activity of carbohydrate-Containing peptidomimetics as new ligands for the human tachykinin NK-2 receptor
705
Design, synthesis and biological activity of novel C2-C3′ N-Linked macrocyclic taxoids
706
Design, synthesis and biological activity of novel dimethyl-{2-[6-substituted-indol-1-yl]-ethyl}-amine as potent, selective, and orally-Bioavailable 5-HT1D agonists
707
Design, synthesis and biological activity of novel non-amidine factor Xa inhibitors. Part 1: P1 structure–activity relationships of the substituted 1-(2-Naphthyl)-1H-pyrazole-5-carboxylamides
708
Design, synthesis and biological activity of novel non-peptidyl endothelin converting enzyme inhibitors, 1-phenyl-tetrazole-formazan analogues
709
Design, synthesis and biological activity of selective and orally available TF/FVIIa complex inhibitors containing non-amidine P1 ligands Original Research Article
710
Design, synthesis and biological activity of some 4-DAMP- related compounds
711
Design, synthesis and biological activity of some tetraamines related to methoctramine and 4-DAMP
712
Design, synthesis and biological activity of YM-60828 derivatives. Part 2: potent and orally-bioavailable factor Xa inhibitors based on benzothiadiazine-4-one template Original Research Article
713
Design, synthesis and biological activity of YM-60828 derivatives: potent and orally-Bioavailable factor Xa inhibitors based on naphthoanilide and naphthalensulfonanilide templates Original Research Article
714
Design, synthesis and biological activity of β-carboline-based type-5 phosphodiesterase inhibitors
715
Design, synthesis and biological evaluation of 1,3,4-oxadiazoles/thiadiazoles bearing pyrazole scaffold as antimicrobial and antioxidant candidates
716
Design, synthesis and biological evaluation of 1,3-diaminopropanes: a new class of polyamine analogs as leishmanicidal agents
717
design, synthesis and biological evaluation of 1,3-diphenyl-3-(phenylthio)propan-1-ones as new cytotoxic agents
718
Design, synthesis and biological evaluation of 1,4-benzodiazepine-2,5-dione-based HDAC inhibitors
719
Design, synthesis and biological evaluation of 3-amino-3-phenylpropionamide derivatives as novel μ opioid receptor ligands
720
Design, Synthesis and Biological Evaluation of 4-Benzamidobenzoic Acid Hydrazide Derivatives as Novel Soluble Epoxide Hydrolase Inhibitors
721
Design, Synthesis and Biological Evaluation of 5-Oxo-1,4,5,6,7,8 Hexahydroquinoline Derivatives as Selective Cyclooxygenase-2 Inhibitors
722
Design, synthesis and biological evaluation of 6-(benzyloxy)-4-methylquinolin-2(1H)-one derivatives as PDE3 inhibitors Original Research Article
723
Design, synthesis and biological evaluation of 7-azatricyclodecanes: analogues of cocaine
724
Design, synthesis and biological evaluation of a novel series of anthrapyrazoles linked with netropsin-like oligopyrrole carboxamides as anticancer agents Original Research Article
725
Design, synthesis and biological evaluation of benzimidazole/benzothiazole and benzoxazole derivatives as cyclooxygenase inhibitors
726
Design, synthesis and biological evaluation of bis(hydroxyphenyl) azoles as potent and selective non-steroidal inhibitors of 17β-hydroxysteroid dehydrogenase type 1 (17β-HSD1) for the treatment of estrogen-dependent diseases Original Research Article
727
Design, synthesis and biological evaluation of chrysin long-chain derivatives as potential anticancer agents Original Research Article
728
Design, Synthesis and Biological Evaluation of Ciprofloxacin- Peptide Conjugates as Anticancer Agents
729
Design, synthesis and biological evaluation of cyclic angiotensin II analogues with 3,5 side-Chain bridges: Role of C-Terminal aromatic residue and ring cluster for activity and implications in the drug design of AT1 non-peptide antagonists
730
Design, synthesis and biological evaluation of hetaryl-nucleoside derivatives as inhibitors of chitin synthase
731
Design, Synthesis and Biological Evaluation of Ketoprofen Conjugated To RGD/NGR for Targeted Cancer Therapy
732
Design, Synthesis and Biological Evaluation of New 1, 4-Dihydropyridine (DHP) Derivatives as Selective Cyclooxygenase-2 Inhibitors
733
Design, synthesis and biological evaluation of new 2,3-diarylquinoline derivatives as selective cyclooxygenase-2 inhibitors Original Research Article
734
Design, Synthesis and Biological Evaluation of New Imidazo[2,1-b] Thiazole Derivatives as Selective COX-2 Inhibitors
735
Design, synthesis and biological evaluation of new oxazines with potential antiparasitic activity
736
Design, synthesis and biological evaluation of new tryptamine and tetrahydro-β-carboline-based selective inhibitors of CDK4 Original Research Article
737
Design, synthesis and biological evaluation of nonpeptide integrin antagonists Original Research Article
738
Design, synthesis and biological evaluation of novel 1α,25-dihydroxyvitamin D3 analogues possessing aromatic ring on 2α-position
739
Design, synthesis and biological evaluation of novel bicyclic β-lactams as potential antimalarials
740
Design, synthesis and biological evaluation of novel lipoamino acid-based glycolipids for oral drug delivery Original Research Article
741
Design, synthesis and biological evaluation of novel non-nucleoside HIV-1 reverse transcriptase inhibitors with broad-spectrum chemotherapeutic properties Original Research Article
742
Design, Synthesis and Biological Evaluation of Novel Peptide-Like Analogues as Selective COX-2 Inhibitors
743
Design, Synthesis and Biological Evaluation of Novel Piperazinone Derivatives as Cytotoxic Agents
744
Design, synthesis and biological evaluation of novel pyridine derivatives as anticancer agents and phosphodiesterase 3 inhibitors Original Research Article
745
Design, synthesis and biological evaluation of novel riccardiphenol analogs Original Research Article
746
Design, synthesis and biological evaluation of novel, simplified analogues of laulimalide: modification of the side chain
747
Design, Synthesis and Biological Evaluation of Oxazolidinone–Quinolone Hybrids Original Research Article
748
Design, synthesis and biological evaluation of piperazine analogues as CB1 cannabinoid receptor ligands Original Research Article
749
Design, synthesis and biological evaluation of selective boron-containing thrombin inhibitors Original Research Article
750
Design, synthesis and biological evaluation of some pyrazole derivatives as anti-inflammatory-antimicrobial agents Original Research Article
751
Design, Synthesis and Biological Evaluation of Some Triazole Schiff’s Base Derivatives as Potential Antitubercular Agents
752
Design, synthesis and biological evaluation of substituted dioxodibenzothiazepines and dibenzocycloheptanes as farnesyltransferase inhibitors
753
Design, synthesis and biological evaluation of succinimide derivatives as potential mechanism-based inhibitors of human leukocyte elastase, cathepsin G and proteinase 3 Original Research Article
754
Design, synthesis and biological evaluation of thiazolidinone derivatives as potential EGFR and HER-2 kinase inhibitors Original Research Article
755
Design, synthesis and biological evaluation of trans 2-(thiophen-2-yl)vinyl heteroaromatic iodides Original Research Article
756
Design, synthesis and biological evaluation of tripeptide boronic acid proteasome inhibitors Original Research Article
757
Design, synthesis and biological evaluations of novel 7-[3-(1-aminocycloalkyl)pyrrolidin-1-yl]-6-desfluoro-8-methoxyquinolones with potent antibacterial activity against multi-drug resistant Gram-positive bacteria Original Research Article
758
Design, synthesis and biological evaluations of novel oxindoles as HIV-1 non-nucleoside reverse transcriptase inhibitors. Part I
759
Design, synthesis and cardioprotective effect of a new class of dual-acting agents: Phenolic tetrahydro-β-carboline RGD peptidomimetic conjugates Original Research Article
760
Design, synthesis and cardioprotective effect of a new class of dual-acting agents: Phenolic tetrahydro-β-carboline RGD peptidomimetic conjugates Original Research Article
761
Design, synthesis and cation-binding properties of novel adamantane- and 2-oxaadamantane-containing crown ethers
762
Design, synthesis and cell growth inhibitory activity of a series of novel aminosubstituted xantheno[1,2-d]imidazoles in breast cancer cells Original Research Article
763
Design, synthesis and characterisation of a peptide with oxaloacetate decarboxylase activity
764
Design, synthesis and characterization of a highly luminescent Eu-complex monomer featuring thenoyltrifluoroacetone and 5-acryloxyethoxymethyl-8-hydroxyquinoline
765
Design, synthesis and characterization of a linear hydrogen bonded homologous series exhibiting reentrant smectic C ordering Original Research Article
766
Design, synthesis and characterization of a modular bridging ligand platform for bio-inspired hydrogen production
767
Design, synthesis and characterization of a novel class of coumarin-based inhibitors of inducible nitric oxide synthase Original Research Article
768
Design, synthesis and characterization of a novel fluorescent probe for nitric oxide (nitrogen monoxide)
769
Design, synthesis and characterization of mixed matrix material for CO2 capture Original Research Article
770
Design, synthesis and characterization of monomolecular interfacial layers
771
Design, synthesis and characterization of podocarpate derivatives as openers of BK channels
772
Design, synthesis and computational modelling of aromatic tweezer-molecules as models for chain-folding polymer blends
773
Design, synthesis and conformational analysis of turn inducer cyclopropane scaffolds: microwave assisted amidation of unactivated esters on catalytic solid support to obtain γ-turn mimic scaffolds
774
Design, synthesis and coordination chemistry of sidearm substituted bisoxazoline ligands
775
Design, synthesis and cruzain docking of 3-(4-substituted-aryl)-1,2,4-oxadiazole-N-acylhydrazones as anti-Trypanosoma cruzi agents Original Research Article
776
Design, synthesis and cytotoxic activities of naphthyl analogues of combretastatin A-4
777
Design, synthesis and cytotoxic effect of hydroxy- and 3-alkylaminopropoxy-9,10-anthraquinone derivatives Original Research Article
778
Design, synthesis and cytotoxic studies on the simplified oxy analog of eleutherobin
779
Design, synthesis and cytotoxicity evaluation of 1-chloromethyl-5-hydroxy-1,2-dihydro-3H-benz[e]indole (seco-CBI) dimers Original Research Article
780
Design, Synthesis and Cytotoxicity Evaluation of New 2-Aryl-5, 6-Dihydropyrrolo[2, 1-a]Isoquinoline Derivatives as Topoisomerase Inhibitors
781
Design, Synthesis and Cytotoxicity Evaluationof New 1,2-diaryl-4, 5, 6, 7-Tetrahydro-1H-benzo[d] Imidazolesas Tubulin Inhibitors
782
Design, synthesis and cytotoxicity of 7-deoxy aryl discodermolide analogues
783
Design, synthesis and DNA-cleavage of Gly-Gly-His-naphthalene diimide conjugates
784
Design, synthesis and docking study of 3,4-dihydropyrimidine-2-one derivatives as inhibitors of the Mitotic Kinesin, Eg5
785
Design, synthesis and early structure–activity relationship of farnesyltransferase inhibitors which mimic both the peptidic and the prenylic substrate Original Research Article
786
Design, Synthesis and Enzymatic Activity of Highly Selective Human Mitochondrial Thymidine Kinase Inhibitors
787
Design, synthesis and evaluation of (E)-α-benzylthio chalcones as novel inhibitors of BCR-ABL kinase Original Research Article
788
Design, synthesis and evaluation of 2,4-diaminoquinazolines as inhibitors of trypanosomal and leishmanial dihydrofolate reductase Original Research Article
789
Design, synthesis and evaluation of 2-amino-4-m-bromoanilino-6-arylmethyl-7H-pyrrolo[2,3-d]pyrimidines as tyrosine kinase inhibitors and antiangiogenic agents Original Research Article
790
Design, synthesis and evaluation of 2-phenyl-1H-benzo[d]imidazole-4,7-diones as vascular smooth muscle cell proliferation inhibitors
791
Design, synthesis and evaluation of 4,7-diamino-1,10-phenanthroline G-quadruplex ligands Original Research Article
792
Design, synthesis and evaluation of 4-imidazolylflavans as new leads for aromatase inhibition
793
Design, synthesis and evaluation of 5-substituted amino-2,4-diamino-8-chloropyrimido-[4,5-b]quinolines as novel antimalarials
794
Design, synthesis and evaluation of a fluorescent peptidyl sensor for the selective recognition of arsenite
795
Design, synthesis and evaluation of a molecularly imprinted polymer for hollow fiber–solid phase microextraction of chlorogenic acid in medicinal plants
796
Design, Synthesis and Evaluation of Antiinflammatory, Analgesic and Ulcerogenicity studies of Novel S-Substituted phenacyl-1,3,4-oxadiazole-2-thiol and Schiff bases of Diclofenac acid as Nonulcerogenic Derivatives Original Research Article
797
Design, Synthesis and Evaluation of Antitubercular Activity of Novel Dihydropyridine Containing Imidazolyl Substituent
798
Design, synthesis and evaluation of bicyclic benzamides as novel 5-HT1F receptor agonists
799
Design, synthesis and evaluation of biological activities of some novel anti-TB agents with bio-reducible functional group
800
Design, synthesis and evaluation of C/D-ring analogs of the fungal metabolite K-76 as potential complement inhibitors
801
Design, synthesis and evaluation of carbazole derivatives as PPARα/γ dual agonists and antioxidants Original Research Article
802
Design, synthesis and evaluation of cytotoxic, antimicrobial, and anti-HIV-1 activities of new 1,2,3,4-tetrahydropyrimidine derivatives
803
Design, synthesis and evaluation of d-galactose-β-cyclodextrin conjugates as drug-carrying molecules Original Research Article
804
Design, Synthesis and Evaluation of d-Homophenylalanyl Epoxysuccinate Inhibitors of the Trypanosomal Cysteine Protease Cruzain
805
Design, synthesis and evaluation of diazadibenzocrown ethers as Pb2+ extractants and carriers in plasticized cellulose triacetate membranes
806
Design, synthesis and evaluation of flavonoid derivatives as potent AChE inhibitors Original Research Article
807
Design, Synthesis and Evaluation of Functionalized Azaglycinamides as Cytotoxic and Antinociceptive Agents
808
Design, Synthesis and Evaluation of Imidazolylmethyl Carbamate Prodrugs of Alkylating Agents
809
Design, synthesis and evaluation of isaindigotone derivatives as acetylcholinesterase and butyrylcholinesterase inhibitors
810
Design, synthesis and evaluation of monovalent ligands for the asialoglycoprotein receptor (ASGP-R) Original Research Article
811
Design, synthesis and evaluation of naphthalene-2-carboxamides as reversal agents in MDR cancer Original Research Article
812
Design, synthesis and evaluation of near-infrared fluorescent pH indicators in a physiologically relevant range
813
Design, synthesis and evaluation of new RDP inhibitors
814
Design, synthesis and evaluation of new α-nucleophiles for the hydrolysis of organophosphorus nerve agents: application to the reactivation of phosphorylated acetylcholinesterase
815
Design, synthesis and evaluation of novel 1,4-naphthoquinone derivatives as antifungal and anticancer agents
816
Design, synthesis and evaluation of novel 2-thiophen-5-yl-3H-quinazolin-4-one analogues as inhibitors of transcription factors NF-кB and AP-1 mediated transcriptional activation: Their possible utilization as anti-inflammatory and anti-cancer agents Origi
817
Design, synthesis and evaluation of novel azasugar-based MMP/ADAM inhibitors
818
Design, synthesis and evaluation of novel bismustard cross-linked lexitropsins
819
Design, synthesis and evaluation of novel P450 fluorescent probes bearing α-cyanoether
820
Design, synthesis and evaluation of novel sulfonyl pyrrolidine derivatives as matrix metalloproteinase inhibitors Original Research Article
821
Design, synthesis and evaluation of novel uracil amino acid conjugates for the inhibition of Trypanosoma cruzi dUTPase
822
Design, synthesis and evaluation of peptidomimetics based on substituted bicyclic 2-pyridones—Targeting virulence of uropathogenic E. coli Original Research Article
823
Design, synthesis and evaluation of potent thymidylate synthase X inhibitors
824
Design, synthesis and evaluation of potential inhibitors of HIV gp120–CD4 interactions
825
Design, synthesis and evaluation of pyridine-based chromatographic adsorbents for antibody purification
826
Design, synthesis and evaluation of racemic 1-(4-hydroxyphenyl)-2-[3-(substituted phenoxy)-2-hydroxy-1-propyl]amino-1-propanol hydrochlorides as novel uterine relaxants
827
Design, synthesis and evaluation of stationary phases for improved achiral supercritical fluid chromatography separations
828
Design, Synthesis and Evaluation of Substituted Aryl-2-Nitrovinyl Derivatives as Small Molecules Proteasome Inhibitors
829
Design, synthesis and evaluation of substituted phenylpropanoic acid derivatives as peroxisome proliferator-activated receptor (PPAR) activators: novel human PPARα-selective activators
830
Design, synthesis and evaluation of synthetic receptors for the recognition of aspartate pairs in an α-helical conformation Original Research Article
831
Design, synthesis and evaluation of transition-state analogue inhibitors of Escherichia coli γ-glutamylcysteine synthetase Original Research Article
832
Design, synthesis and evaluation of trifluoromethane sulfonamide derivatives as new potent and selective peroxisome proliferator-activated receptor α agonists
833
Design, synthesis and evaluation of two diastereoisomeric phosphonate inhibitors of lamb pregastric lipase
834
Design, synthesis and fluorescence of two-dimensional pillared layers by connecting infinite one-dimensional chains via 4,4′-bipyridine
835
Design, synthesis and glutathione peroxidase-Like properties of ovothiol-Derived diselenides Original Research Article
836
Design, synthesis and in vitro activities of a series of benzimidazole/benzoxazole glycoprotein IIb/IIIa inhibitors
837
Design, synthesis and in vitro antimalarial activity of an acylhydrazone library
838
Design, synthesis and in vitro antiprotozoal activity of benzimidazole-pentamidine hybrids
839
Design, synthesis and in vitro antitumor activity of 4-aminoquinoline and 4-aminoquinazoline derivatives targeting EGFR tyrosine kinase Original Research Article
840
Design, synthesis and in vitro antitumor activity of new trans 2-[2-(heteroaryl)vinyl]-1,3-dimethylimidazolium iodides Original Research Article
841
Design, Synthesis and in vitro Biochemical Activity of Novel Amino Acid Sulfonohydrazide Inhibitors of MurC
842
Design, synthesis and in vitro characterization of Glucagon-Like Peptide-1 derivatives for pancreatic beta cell imaging by SPECT Original Research Article
843
Design, synthesis and In vitro evaluation of potent, novel, small molecule inhibitors of plasminogen activator inhibitor-1
844
Design, synthesis and in vitro evaluation of pyridinium ion based cyclase inhibitors and antifungal agents Original Research Article
845
Design, synthesis and in vitro evaluation on HRPE cells of ascorbic and 6-bromoascorbic acid conjugates with neuroactive molecules Original Research Article
846
Design, synthesis and in vivo activity of 9-(S)-dihydroerythromycin derivatives as potent anti-inflammatory agents
847
Design, Synthesis and In Vivo Evaluation of a Candidate Fusion Epitopic Construct Vaccine Based on M2e, HA1, HA2, NA and NP Fragments of the Highly Pathogenic Avian H5N1 Influenza Virus
848
Design, synthesis and melatoninergic potency of new N-acyl 8,9-dihydro-4-methoxy-7H-2-benzo[de]quinolinalkanamines
849
Design, synthesis and membrane ion transport properties of cystine- and serine-based cyclo-4-oxa-heptane-1,7-bisamides
850
Design, synthesis and molecular modeling study of iminodiacetyl monohydroxamic acid derivatives as MMP inhibitors Original Research Article
851
Design, synthesis and nootropic activity of new analogues of sunifiram and sapunifiram, two potent cognition-enhancers Original Research Article
852
Design, synthesis and peroxidase-like activity of 3α-helix proteins covalently bound to heme
853
Design, synthesis and pH sensing properties of novel 1,8-naphtalimide-based bichromophoric system
854
Design, synthesis and pharmacological evaluation of 3-benzylazetidine-2-one-based human chymase inhibitors Original Research Article
855
Design, synthesis and pharmacological evaluation of hybrid molecules out of quinazolinimines and lipoic acid lead to highly potent and selective butyrylcholinesterase inhibitors with antioxidant properties Original Research Article
856
Design, Synthesis and Pharmacological Evaluation of Novel 2-[2-(2-Chlorophenoxy) phenyl]-1,3,4-oxadiazole Derivatives as Benzodiazepine Receptor Agonists
857
Design, synthesis and pharmacological evaluation of novel naphthalenic derivatives as selective MT1 melatoninergic ligands Original Research Article
858
Design, synthesis and pharmacological evaluation of novel pyrazolo[3,4-b]thieno[2,3-d]pyridine acid derivatives: a new class of anti-inflammatory and anti-platelet agents
859
Design, synthesis and pharmacological profile of novel dopamine D2 receptor ligands Original Research Article
860
Design, synthesis and photobiological properties of 3,4-cyclopentenepsoralens Original Research Article
861
Design, synthesis and photochemical properties of caged bile acids
862
Design, synthesis and photo-cross-linking of a new photosensitive macromonomer from tetra-branched poly(ethylene oxide)s
863
Design, synthesis and photophysics of ruthenium and osmium complexes through 20 years of collaboration Review Article
864
Design, synthesis and photovoltaic properties of [60]fullerene based molecular materials
865
Design, synthesis and physico-chemical investigation of a dinuclear zinc(II) complex with a novel ‘end-off’ compartmental ligand
866
Design, synthesis and preliminary activity assay of 1,2,3,4-tetrahydroisoquinoline-3-carboxylic acid derivatives as novel Histone deacetylases (HDACs) inhibitors Original Research Article
867
Design, synthesis and preliminary biological evaluation of a focused combinatorial library of stereodiverse carbohydrate-scaffold-based peptidomimetics Original Research Article
868
Design, synthesis and preliminary biological evaluation of acridine compounds as potential agents for a combined targeted chemo-radionuclide therapy approach to melanoma Original Research Article
869
Design, synthesis and preliminary biological evaluation of new hydroxamate histone deacetylase inhibitors as potential antileukemic agents
870
Design, synthesis and preliminary biological evaluation of zatebradine analogues as potential blockers of the hyperpolarization-activated current Original Research Article
871
Design, synthesis and preliminary biological evaluations of novel amphiphilic drug carriers
872
Design, synthesis and preliminary evaluation of novel 3′-Substituted carboxycyclopropylglycines as antagonists at group 2 metabotropic glutamate receptors
873
Design, synthesis and preliminary pharmacological evaluation of new analogues of DM232 (unifiram) and DM235 (sunifiram) as cognition modulators Original Research Article
874
Design, synthesis and preliminary pharmacological evaluation of new piperidine and piperazine derivatives as cognition-enhancers Original Research Article
875
Design, synthesis and primary activity assay of bi- or tri-peptide analogues with the scaffold l-arginine as amino-peptidase N/CD13 inhibitors Original Research Article
876
Design, synthesis and properties of a trinuclear copper(I) cluster with a triazenide ligand
877
Design, synthesis and properties of functional materials based on fullerene
878
Design, Synthesis and Properties of Low Band Gap Polyfluorenes for Photovoltaic Devices
879
Design, synthesis and properties of polyaromatics with hydrophobic and hydrophilic long blocks as proton exchange membrane for PEM fuel cell application
880
Design, synthesis and QSAR studies on N-aryl heteroarylisopropanolamines, a new class of non-peptidic HIV-1 protease inhibitors Original Research Article
881
Design, synthesis and reactivity with dichloro-bis(triphenylphosphine) platinum(II) of two triazenide compounds
882
Design, synthesis and redox properties of a fluorene platform linking two different Bodipy dyes
883
Design, synthesis and redox properties of two ferrocene-containing iron chelators
884
Design, synthesis and ribosome binding of chloramphenicol nucleotide and intercalator conjugates
885
Design, synthesis and RNase A inhibition activity of catechin and epicatechin and nucleobase chimeric molecules
886
Design, synthesis and SAR analysis of novel selective σ1 ligands (Part 2) Original Research Article
887
Design, synthesis and SAR of a series of 2-substituted 4-amino-quinazoline neuropeptide Y Y5 receptor antagonists
888
Design, synthesis and SAR of potent statine-based BACE-1 inhibitors: Exploration of P1 phenoxy and benzyloxy residues Original Research Article
889
Design, synthesis and SAR of RGD peptide hybrids as highly efficient inhibitors of platelet aggregation
890
Design, synthesis and sensor activity of a highly photostable blue emitting 1,8-naphthalimide
891
Design, synthesis and sequence selective DNA cleavage of functional models of bleomycin—II. 1,2-trans-disubstituted cyclopropane units as novel linkers Original Research Article
892
Design, synthesis and solid state structural characterisation of a metallacyclophane formed by a diazadioxamacrocycle bearing two pyridines and silver(I) cation
893
Design, synthesis and spectral studies of novel bile acid-arene conjugates: Trans to cis isomerization of azobenzene core controlled by bile acid hydrophobicity
894
Design, synthesis and spectroscopic studies of resveratrol aliphatic acid ligands of human serum albumin Original Research Article
895
Design, Synthesis and Stability of N-Acyloxymethyl- and N-Aminocarbonyloxymethyl-2-azetidinones as Human Leukocyte Elastase Inhibitors
896
Design, synthesis and structural analysis of mixed α/β-peptides that adopt stable cyclic hairpin-like conformations
897
Design, synthesis and structure of new chiral squaric acid monoaminoalcohols and diaminoalcohols and their use as catalysts in asymmetric reduction of ketones and diketones
898
Design, synthesis and structure of new dendritic melamines. First use of a tandem C-2-substituted serinol—O,O-masked 4-piperidone as a peripheral unit in iterative synthesis
899
Design, synthesis and structure–activity relationship of 2-(3′,4′,5′-trimethoxybenzoyl)-benzo[b]furan derivatives as a novel class of inhibitors of tubulin polymerization Original Research Article
900
Design, synthesis and structure–activity relationship of a series of arginine aldehyde factor Xa inhibitors. Part 1: structures based on the ( )-Arg-Gly-Arg tripeptide sequence
901
Design, synthesis and structure–activity relationship of a series of fragment analogues of antistasin (ATS) and ghilantens (GLS)
902
Design, synthesis and structure–activity relationship of novel RXR-selective modulators
903
Design, synthesis and structure–activity relationship of simple bis-amides as potent inhibitors of GlyT1
904
Design, synthesis and structure–activity relationship studies of hexahydropyrazinoquinolines as a novel class of potent and selective dopamine receptor 3 (D3) ligands
905
Design, synthesis and structure-activity relationship studies of novel 4,4-bis(trifluoromethyl)imidazolines as acyl-CoA: Cholesterol acyltransferase (ACAT) inhibitors and antihypercholesterolemic agents Original Research Article
906
Design, synthesis and structure–activity relationship studies of novel indazole analogues as DNA gyrase inhibitors with Gram-positive antibacterial activity
907
Design, synthesis and structure–activity relationships of 6-O-arylpropargyl diazalides with potent activity against multidrug-resistant Streptococcus pneumoniae
908
Design, synthesis and structure–Activity relationships of benzoxazinone-Based factor Xa inhibitors
909
Design, synthesis and structure–Activity relationships of dual inhibitors of acetylcholinesterase and serotonin transporter as potential agents for Alzheimerʹs disease Original Research Article
910
Design, synthesis and structure–activity relationships of new phosphinate inhibitors of MurD
911
Design, synthesis and structure–Activity relationships of novel imidazolo[1,2-a]pyrimid-5-ones as potent GnRH receptor antagonists
912
Design, synthesis and structure-activity relationships of novel strychnine-insensitive glycine receptor ligands
913
Design, synthesis and structure–activity study of shorter hexa peptide analogues as HIV-1 protease inhibitors Original Research Article
914
Design, synthesis and structure–affinity relationships of 4-methylidenepiperidine and 4-aryl-1,2,3,6-tetrahydropyridine derivatives as corticotropin-releasing factor1 receptor antagonists Original Research Article
915
Design, synthesis and structure–affinity relationships of aryloxyanilide derivatives as novel peripheral benzodiazepine receptor ligands Original Research Article
916
Design, synthesis and study of photoluminescence and electroluminescence of new poly(2,6-naphthylenevinylene) derivatives
917
Design, synthesis and testing of amino-bicycloaryl based orally bioavailable thrombin inhibitors
918
Design, synthesis and the electrochemical performance of MnO2/C@CNT as supercapacitor material
919
Design, synthesis and transformation of some heteroannulated 3-aminopyridines—purine isosteres with exocyclic nitrogen atom
920
Design, synthesis and trypanocidal activity of lead compounds based on inhibitors of parasite glycolysis Original Research Article
921
Design, synthesis and utilization of a novel coupling reagent for the preparation of O-alkyl hydroxamic acids
922
Design, synthesis and X-ray crystallographic studies of [7.3.1] and [8.3.1] macrocyclic FKBP-12 ligands
923
Design, synthesis and X-ray crystallographic studies of novel FKBP-12 ligands
924
design, synthesis of imidazolone and oxazepine derivatives bearing imidazo (2, 1-b) thiazole along with its antimicrobial activity
925
Design, synthesis of novel peptidomimetic derivatives of 4-HPR for rhabdoid tumors
926
Design, synthesis, activity, and structure of a novel class of matrix metalloproteinase inhibitors containing a heterocyclic P2′-P3′ amide bond isostere
927
Design, Synthesis, and Actions of a Novel Chimeric Natriuretic Peptide: CD-NP Original Research Article
928
Design, synthesis, and activity of 4-quinolone and pyridone compounds as nonthiol-containing farnesyltransferase inhibitors
929
Design, synthesis, and activity of achiral analogs of 2-quinolones and indoles as non-thiol farnesyltransferase inhibitors
930
Design, synthesis, and activity of caffeoyl pyrrolidine derivatives as potential gelatinase inhibitors Original Research Article
931
Design, synthesis, and activity of HDAC inhibitors with a N-formyl hydroxylamine head group
932
Design, synthesis, and activity of novel cis- and trans-3,6-disubstituted pyran biomimetics of 3,6-disubstituted piperidine as potential ligands for the dopamine transporter
933
Design, synthesis, and AMPA receptor antagonistic activity of a novel 6-nitro-3-oxoquinoxaline-2-carboxylic acid with a substituted phenyl group at the 7 position Original Research Article
934
Design, synthesis, and antibacterial activities of novel 3,6-bicyclolide oximes: Length optimization and zero carbon linker oximes
935
Design, synthesis, and anticonvulsant activity of N-phenylamino derivatives of 3,3-dialkyl-pyrrolidine-2,5-diones and hexahydro-isoindole-1,3-diones Original Research Article
936
Design, synthesis, and anticonvulsant activity of some sulfamides Original Research Article
937
Design, synthesis, and antifungal activities in vitro of novel tetrahydroisoquinoline compounds based on the structure of lanosterol 14α-demethylase (CYP51) of fungi
938
Design, synthesis, and antifungal activity of inhibitors of brassilexin detoxification in the plant pathogenic fungus Leptosphaeria maculans Original Research Article
939
Design, synthesis, and anti-Helicobacter pylori activity of erythromycin A (E)-9-oxime ether derivatives
940
Design, Synthesis, and Anti-HIV Activity of “Multi-Layered” Macromonocyclic Polyamines
941
Design, synthesis, and anti-HIV activity of 2′,3′-didehydro-2′,3′-dideoxyuridine (d4U), 2′,3′-dideoxyuridine (ddU) phosphoramidate ‘ProTide’ derivatives
942
Design, synthesis, and anti-inflammatory activity both in vitro and in vivo of new betulinic acid analogues having an enone functionality in ring A
943
Design, synthesis, and anti-integrase activity of catechol–DKA hybrids Original Research Article
944
Design, synthesis, and antimalarial activity of structural chimeras of thiosemicarbazone and ferroquine analogues
945
Design, synthesis, and antioxidant activity of FeAOX-6, a novel agent deriving from a molecular combination of the chromanyl and polyisoprenyl moieties
946
Design, synthesis, and antioxidant potency of novel α-tocopherol analogues in isolated membranes and intact cells
947
Design, synthesis, and antiproliferative activity of some novel aminosubstituted xanthenones, able to overcome multidrug resistance toward MES-SA/Dx5 cells
948
Design, synthesis, and antiproliferative and CDK2-cyclin a inhibitory activity of novel flavopiridol analogues Original Research Article
949
Design, synthesis, and anti-tumor activity of (2-O-alkyloxime-3-phenyl)-propionyl-1-O-acetylbritannilactone esters Original Research Article
950
Design, synthesis, and antitumor activity of bicyclic and isomeric analogues of illudin M
951
Design, synthesis, and antitumor activity of bile acid–polyamine–nucleoside conjugates
952
Design, synthesis, and antitumor evaluation of novel acenaphtho[1,2-b]pyrrole-carboxylic acid esters with amino chain substitution Original Research Article
953
Design, Synthesis, and Antiviral Activity of Novel Phosphoramidates
954
Design, synthesis, and antiviral properties of 4′-substituted ribonucleosides as inhibitors of hepatitis C virus replication: The discovery of R1479
955
Design, synthesis, and application of novel triclosan prodrugs as potential antimalarial and antibacterial agents Original Research Article
956
Design, synthesis, and binding studies of bidentate Zn-chelating peptidic inhibitors of glyoxalase-I
957
Design, synthesis, and bioactivity of novel inhibitors of E. coli aspartate transcarbamoylase
958
Design, synthesis, and bioactivity of putative tubulin ligands with adamantane core
959
Design, synthesis, and bioactivity of simplified paclitaxel analogs based on the T-Taxol bioactive conformation Original Research Article
960
Design, synthesis, and bioavailability evaluation of coumarin-based prodrug of meptazinol
961
Design, synthesis, and biochemical evaluation of novel cruzain inhibitors with potential application in the treatment of Chagas’ disease
962
Design, synthesis, and biochemical evaluation of novel αvβ3 integrin ligands
963
Design, synthesis, and bio-evaluation of new isoindoline-1,3-dione derivatives as possible inhibitors of acetylcholinesterase
964
Design, synthesis, and biological activities of conformationally restricted analogs of primaquine with a 1,10-phenanthroline framework
965
Design, synthesis, and biological activities of madindoline analogues
966
Design, synthesis, and biological activities of novel Ligustrazine derivatives Original Research Article
967
Design, synthesis, and biological activities of triazole tubulysin V analogue
968
Design, synthesis, and biological activity of a cyclic peptide: An inhibitor of HIV-1 tat–TAR interactions in human cells
969
Design, synthesis, and biological activity of anti-angiogenic hypoxic cell radiosensitizer haloacetylcarbamoyl-2-nitroimidazoles Original Research Article
970
Design, synthesis, and biological activity of diiminoisoindolines as complement component 3a antagonists
971
Design, synthesis, and biological activity of folate receptor-targeted prodrugs of thiolate histone deacetylase inhibitors
972
Design, synthesis, and biological activity of N6-substituted-4′-thioadenosines at the human A3 adenosine receptor Original Research Article
973
Design, Synthesis, and Biological Activity of New Thiazolidine-4-One Derived from Symmetrical 4-Amino-1,2,4-Triazole
974
Design, synthesis, and biological activity of non-amidine factor Xa inhibitors containing pyridine N-oxide and 2-carbamoylthiazole units Original Research Article
975
Design, synthesis, and biological activity of non-basic compounds as factor Xa inhibitors: SAR study of S1 and aryl binding sites Original Research Article
976
Design, synthesis, and biological activity of novel 4-(3,4-dimethoxyphenyl)-2-methylthiazole-5-carboxylic acid derivatives Original Research Article
977
Design, Synthesis, and Biological Activity of Novel Factor Xa Inhibitors: 4-Aryloxy Substituents of 2,6-Diphenoxypyridines Original Research Article
978
Design, synthesis, and biological activity of novel factor Xa inhibitors: Improving metabolic stability by S1 and S4 ligand modification Original Research Article
979
Design, synthesis, and biological activity of novel PPARγ ligands based on rosiglitazone and 15d-PGJ2
980
Design, synthesis, and biological activity of novel purine and bicyclic pyrimidine factor Xa inhibitors
981
Design, synthesis, and biological activity of novel triazole amino acids used to probe binding interactions between ligand and neutral amino acid transport protein SN1
982
Design, synthesis, and biological activity of piperidine diamine derivatives as factor Xa inhibitor
983
Design, synthesis, and biological activity of potent and selective inhibitors of mast cell tryptase
984
Design, synthesis, and biological characterization of potential antiatherogenic nitric oxide releasing tocopherol analogs Original Research Article
985
Design, synthesis, and biological evaluation of 1-(4-sulfamylphenyl)-3-trifluoromethyl-5-indolyl pyrazolines as cyclooxygenase-2 (COX-2) and lipoxygenase (LOX) inhibitors Original Research Article
986
Design, synthesis, and biological evaluation of 1,2,3-trisubstituted-1,4-dihydrobenzo[g]quinoxaline-5,10-diones and related compounds as antifungal and antibacterial agents Original Research Article
987
Design, synthesis, and biological evaluation of 1,3-diarylprop-2-en-1-ones : A novel class of cyclooxygenase-2 inhibitors Original Research Article
988
Design, synthesis, and biological evaluation of 1,3-dioxoisoindoline-5-carboxamide derivatives as T-type calcium channel blockers
989
Design, synthesis, and biological evaluation of 10-methanesulfonyl-DDACTHF, 10-methanesulfonyl-5-DACTHF, and 10-methylthio-DDACTHF as potent inhibitors of GAR Tfase and the de novo purine biosynthetic pathway Original Research Article
990
Design, synthesis, and biological evaluation of 6-methoxy-2-arylquinolines as potential P-glycoprotein inhibitors
991
Design, synthesis, and biological evaluation of 8-biarylquinolines: A novel class of PDE4 inhibitors
992
Design, synthesis, and biological evaluation of a cephalosporin–monohydroguaiaretic acid prodrug activated by a monoclonal antibody–β-lactamase conjugate Original Research Article
993
Design, synthesis, and biological evaluation of a dansyled amino acid derivative as an imaging agent for apoptosis
994
Design, synthesis, and biological evaluation of a new class of small molecule peptide mimetics targeting the melanocortin receptors
995
Design, synthesis, and biological evaluation of a novel class of fluorescein-based N-glycosylamines Original Research Article
996
Design, synthesis, and biological evaluation of a scaffold for iGluR ligands based on the structure of (−)-dysiherbaine
997
Design, synthesis, and biological evaluation of a series of simple and novel potential antimalarial compounds
998
Design, Synthesis, and Biological Evaluation of a Series of β-Lactam-Based Prodrugs Original Research Article
999
Design, synthesis, and biological evaluation of achiral analogs of duocarmycin SA
1000
Design, synthesis, and biological evaluation of alcyopterosin A and illudalane derivatives as anticancer agents Original Research Article