<< مقالات لاتين فني مهندسي >>
<< بر اساس عنوان >>
1
Comparison of the worst and best sum-of-products expressions for multiple-valued functions
2
Comparison of the X-ray performance of small pixel CdTe and CZT detectors
3
Comparison of the Ziv-Zakai lower bound on multipath time delay estimation with autocorrelator performance
4
Comparison of the Ziv-Zakai lower bound on time delay estimation with correlator performance
5
Comparison of theoretical and experimental 60 GHz silicon IMPATT diode performance
6
Comparison of theoretical and experimental data for the near field of an open-ended rectangular waveguide
7
Comparison of theoretical and experimental performance of 10 hp switched reluctance motor
8
Comparison of Theoretical and Experimental Research Results for Frequency-Territorial Planning of a Cellular Network on the Basis of Broadband Radio Access Systems in City Building Conditions
9
Comparison of theoretical and experimental results for millimeter-wave GaAs IMPATT´s
10
Comparison of Theoretical and Measured Brightness Temperature of a Soybean Canopy
11
Comparison of theoretical and measured values for attenuation of precision coaxial lines
12
Comparison of Theoretical and Numerical Electromagnetic Modeling for HTS Synchronous Generator
13
Comparison of theoretical and simulated performance of optimal and suboptimal filters in a dense multitarget environment
14
Comparison of Theoretical Biases in Estimating Polarimetric Properties of Precipitation With Weather Radar Using Parabolic Reflector, or Planar and Cylindrical Arrays
15
Comparison of theoretical limits between superjunction and field plate structures
16
Comparison of theoretical models with practice for ADSL
17
Comparison of theoretical results of the dispersion and interaction impedance with those of equivalent circuit, simulations and experiments for the double slot coupled cavity slow wave structure in TWT
18
Comparison of Theoretically Simulated and Experimental Scattering Matrix Parameters in a Five Port Transmission Line Frequency Multiplexer for Solid State Nuclear Magnetic Resonance Techniques
19
Comparison of theories for high-speed linear induction motors
20
Comparison of theory and experiment for dispersion-managed solitons in a recirculating fiber loop
21
Comparison of Theory and Experiment in an Electron-Beam-Controlled High-Power TEA
Laser
22
Comparison of theory and experiment on electron cyclotron emission from spherical tori
23
Comparison of theory and practice for higher order modes in a small angle corrugated horn (part 2 experimental results)
24
Comparison of theory and simulation for a radially symmetric transit-time oscillator
25
Comparison of theory and simulation for a radially-symmetric transit-time oscillator
26
Comparison of Therapeutic Magnetic Stimulation With Electric Stimulation of Spinal Column Vertebrae
27
Comparison of thermal and optical performance of Linear Fresnel and Parabolic Trough Concentrator
28
Comparison of thermal and visual facial imagery for use in sparse representation based facial recognition system
29
Comparison of thermal annealing behavior of radiation induced defects in lattice mismatched InGaP and AlInGaP solar cells structures
30
Comparison of thermal characteristics of Light-emitting Diode chips and electrical heating source
31
Comparison of thermal characteristics of novel RF MEMS dielectric-block phase shifter to conventional MEMS phase-shifter concepts
32
Comparison of thermal enhancements to a commercial quad flatpack
33
Comparison of thermal fatigue reliability of SnPb and SAC solders under various stress range conditions
34
Comparison of Thermal Infrared Emissivities Retrieved With the Two-Lid Box and the TES Methods With Laboratory Spectra
35
Comparison of Thermal Neutron Flux Measured by
Fission Chamber and Rhodium Self-Powered Neutron Detector in MTR
36
Comparison of thermal neutron flux measured by uranium 235 fission chamber and rhodium self-powered neutron detector in MTR
37
Comparison of thermal performance between glass and silicon interposers
38
Comparison of thermal performance of circular and elliptical pin fin heat sinks in assisting mixed convection
39
Comparison of thermal performances of plate-fin and pin-fin heat sinks subject to an impinging flow
40
Comparison of thermal response of extremely high temperature in Jingjintang and GTHA urban agglomerations based on WRF model
41
Comparison of thermal response of GMR sensor subjected to HBM and CDM transients
42
Comparison of thermal response of LPGs written in SMF-28 and B-Ge Co doped photosensitive fiber
43
Comparison of thermal-hydraulic performance of singe-phase micro-pin-fin and micro-channel heat sinks
44
Comparison of thermal-shunt and flip-chip HBT thermal impedances: comment on “Novel HBT with reduced thermal impedance”
45
Comparison of thermodynamic functions for different models of electron spectrum in layered crystals
46
Comparison of thermometer to binary encoders for flash ADCs
47
Comparison of thick-and thin-film technology using wafer probes
48
Comparison of thin film and ring heads for perpendicular recording
49
Comparison of thin film cracking and delamination for aluminum and copper silicon interconnects with organic packaging
50
Comparison of thin-wire models for TLM method
51
Comparison of thread signatures for error detection in hybrid multi-cores
52
Comparison of Three 108-MHz Systems for 1.6 MW
53
Comparison of three 3-phase converter topologies for ups applications
54
Comparison of three access protocols for VSAT networks
55
Comparison of three accurate methods to measure AC voltage at low frequencies
56
Comparison of three accurate methods to measure AC voltage at low frequencies
57
Comparison of three algorithms for estimating Snow Water Equivalent (SWE) over the La Grande River watershed using SSM/I data in the context of Hydro- Québec’s hydraulic power management
58
Comparison of three algorithms for solving the convergent demand responsive transportation problem
59
Comparison of three anatomic sheep models for magnetic resonance safety
60
Comparison of three- and nine-phase hybrid permanent magnet generators
61
Comparison of three applications of ConTraSPECT
62
Comparison of three applications of ConTraSPECT
63
Comparison of three approaches on DSP based digital controlled 2-wheeler forward converter
64
Comparison of three approximate kinematic models for space object tracking
65
Comparison of three automated stacking alternatives by means of simulation
66
Comparison of three auto-regressive modeling methods
67
Comparison of three back-propagation architectures for interactive animal names utterance learning
68
Comparison of three biphasic defibrillation waveforms: Gurvich waveform is more efficient
69
Comparison of Three Calculation Models on Overall Stability Analysis of Telescopic Boom with Built-in Cylinder
70
Comparison of three change detection algorithms for an electronics manufacturing process
71
Comparison of three closed-loop transmit diversity schemes
72
Comparison of three control algorithms for single-phase UPQC
73
Comparison of three control theories for single-phase Active Power Filters
74
Comparison of three correlation coefficient estimators for gaussian stationary processes
75
Comparison of three cross-polarisation prediction methods for reflector antennas
76
Comparison Of Three Data Acquisition Techniques For 3-D Tooth Surface Mapping
77
Comparison of Three Design Architectures for Quantum Dot Infrared Photodetectors: InGaAs-Capped Dots, Dots-in-a-Well, and Submonolayer Quantum Dots
78
Comparison of three designs for haptic button edges on touchscreens
79
Comparison of three different architectures for MOS-compatible quadratic synapses
80
Comparison of three different electric powertrains for the use in high performance Electric Go-Kart
81
Comparison of three different electric powertrains for the use in hybrid electric vehicles
82
Comparison Of Three Different Expert Systems In Oral Radiology
83
Comparison of three different measures for curve saliency
84
Comparison of three different methods to model the semiconductor manufacturing yield
85
Comparison of three different models to represent the wrist during wheelchair propulsion
86
Comparison of three different modulators for Power Converters with respect to EMI optimization
87
Comparison of three different multi-scale models for transmission lines to simulate diverse transients in power systems
88
Comparison of three different sub-harmonic mixers implemented in SiGe process technology for the 60GHz license free frequency band
89
Comparison of three different topologies of driving LEDs with a piezoelectric transformer
90
Comparison of three different transducer concepts for acoustic bladder volume measurements
91
Comparison Of Three Dimensional Operators
92
Comparison of three diversity handover algorithms by using measured propagation data
93
Comparison of three electrical capacitance tomography systems
94
Comparison of Three Electrochemical Energy Buffers Applied to a Hybrid Bus Powertrain With Simultaneous Optimal Sizing and Energy Management
95
Comparison of Three Electromechanical Oscillation Damping Estimation Methods
96
Comparison of three ENG tripolar cuff recording configurations
97
Comparison of Three Estimation Methods for RSSI-Based Localization with Multiple Transmit Antennas
98
Comparison of three evolutionary algorithms for harmonic mitigation using SAPF
99
Comparison of three face recognition algorithms
100
Comparison of Three FDTD Modeling Techniques for Coaxial Feed
101
Comparison of three fixed point signal processors for waveform coding of speech
102
Comparison of three FMM techniques for solving hybrid FE-BI systems
103
Comparison of three formulations for eddy-current and skin effect problems
104
Comparison of Three Front-end DC-DC Converters for 1200W Server Power Supply
105
Comparison of three group ICA methods for multi-subject fMRI data analysis
106
Comparison of three harmonic extraction techniques for active filters
107
Comparison of three high-frequency diffraction techniques
108
Comparison of three humidity sensors for a pulmonary function diagnosis microsystem
109
Comparison of three ICA algorithms for ocular artifact removal from TMS-EEG recordings
110
Comparison of three IGBT-inverters, one hard-switched and two with snubber circuits using a minimum number of components
111
Comparison of three implementations of digital average current control for DC-DC converters
112
Comparison of Three in Situ Surface Soil Moisture Measurements And Application to C-Band Scatterometer Calibration
113
Comparison of three indirect field measuring methods for forest canopy leaf area index estimation
114
Comparison of three integral formulations for the 2-D TE scattering problem
115
Comparison of Three Interpolation Techniques in Comb-Type Pilot-Assisted Channel Coded OFDM System
116
Comparison of three interpolator designs for use in OFDM transmitters
117
Comparison of three isolated bi-directional DC/DC converter topologies for a backup photovoltaic application
118
Comparison of three Kalman filters for an indoor passive tracking system
119
Comparison of three Kalman filters for speed estimation of induction machines
120
Comparison of three kinds of compensation algorithms based on magnetic sensors
121
Comparison of Three List Detectors in Iterative Decoding and Channel Estimation in MIMO OFDM
122
Comparison of three magnet array-type rotors in surface permanent magnet-type vernier motor
123
Comparison of three measures of QT dispersion
124
Comparison of Three Methods for Classifying Burst and Suppression in the EEG of Post Asphyctic Newborns
125
Comparison of three methods for estimating movement parameters
126
Comparison of three methods for the measurement of printed antenna efficiency
127
Comparison of Three Methods for the Measurement of the Differential Impedance of a Balanced Device [Measurements Corner]
128
Comparison of Three Methods of Eliminating Musical Tones in Speech Denoising Subtractive Techniques
129
Comparison of three methods of multivariable-system identification using p.r.b.s.
130
Comparison of three methods of partial volume correction in dynamic PET cardiac imaging: a phantom and a pig study
131
Comparison of three methods to determine the density of moist air
132
Comparison of three methods to determine the spectral parameters (P and T) for GPS tracking error calculation
133
Comparison of three methods to estimate regional wall motion on the Evalechocard database of echocardiographic image sequences
134
Comparison of three methods to measure the internal pressure of empty MEMS packages
135
Comparison of Three Modeling Approaches for a Thermodynamic Cooling System With Time-Varying Delay
136
Comparison of three modern controllers for wide range power regulation of nuclear reactors
137
Comparison of three MPPT algorithms for three-level neutral-point-clamped qz-source inverter
138
Comparison of three multiuser quantum key distribution networks
139
Comparison of three multivariate methods of inferential modeling of soil organic matter using hyper spectra
140
Comparison of three nonlinear optical switch geometries
141
Comparison of three numerical treatments for the open-ended coaxial line sensor
142
Comparison of Three Objective Image Quality Measures´ Performances
143
Comparison of three optimisation methods for constrained generalised predictive control coupled with an estimation by genetic algorithm
144
Comparison of three permanent magnet structures with respect to torque production by means of analytical field calculations
145
Comparison of three phase 4-leg shunt active power filter algorithms
146
Comparison of three phase current source inverters and voltage source inverters linked with DC to DC boost converters for fuel cell generation systems
147
Comparison of three phase rectifier topologies in small wind turbines
148
Comparison of Three Pixel Distance Measures for L
spl infin
Geometric Reconstruction
149
Comparison of three popular control strategies used in shunt active power filters
150
Comparison of three post-filtering algorithms for residual acoustic echo reduction
151
Comparison of three procedures for the identification of hybrid systems
152
Comparison of Three Proportional-Integral-Derivative Based Controllers on a Bilinear Electric Resistance Furnace
153
Comparison of Three Pulse Processing Systems for Microdosimetry
154
Comparison of three pulse processing systems for microdosimetry
155
Comparison of three PWM strategies-SPWM, SVPWM & one-cycle control
156
Comparison of three radiative transfer model inversion techniques to estimate canopy biophysical variables from remote sensing data
157
Comparison of three reactive powers to analyze operation of wind turbines during voltage dips
158
Comparison of three realisable class 1 partial response filters
159
Comparison of Three Receiver Designs for Optical Wireless Communications using White LEDs
160
Comparison of three right-unilateral electroconvulsive therapy montages
161
Comparison of three rough surface classifiers
162
Comparison of three scattering models for ultrasound blood characterization
163
Comparison of Three Scheduling Scheme in Multi-Cells Cooperative Systems
164
Comparison of three search algorithms for mobile trip planner for Eskisehir city
165
Comparison of three sea-spectrum models with applications to backscattering calculation
166
Comparison of three series fed microstrip array geometries
167
Comparison of three series hybrid active power filter topologies
168
Comparison of three simple field-effect-transistor models
169
Comparison of Three Single-Phase PLL Algorithms for UPS Applications
170
Comparison of three spectrum access schemes in cognitive radios
171
Comparison of three spike detectors dedicated to single unit action potentials of the auditory nerve
172
Comparison of Three Statistical Texture Measures for Lamb Grading
173
Comparison of three structures of low noise amplifiers and development of a filter of RF for receivers for PCS
174
Comparison of three suboptimum detection procedures
175
Comparison of three switching strategies for Indirect Matrix Converter
176
Comparison of Three Techniques of Partial Discharge Measurements in Power Transformers
177
Comparison of Three Techniques of Partial Discharge Measurements in Power Transformers
178
Comparison of three time-series NDVI reconstruction methods based on TIMESAT
179
Comparison of three time-varying delay estimators with application to electromyography
180
Comparison of three topologies for VRM fast transient application
181
Comparison of three topology candidates for 12 V VRM
182
Comparison of Three Transfer Alignment Methods in Marine Missile SINS
183
Comparison of three T-wave delineation algorithms based on wavelet filterbank, correlation and PCA
184
Comparison of three type PM brushless machine for flywheel energy storage system
185
Comparison of Three Types of Induction Motor Control
186
Comparison of three types of permanent magnet linear eddy current brake according to magnetization pattern
187
Comparison of three types of permanent magnet linear eddy-current brakes according to magnetization pattern
188
Comparison of three types of PM brushless machines for an electro-mechanical battery
189
Comparison of three types of wavelength conversion schemes based on nonlinear polarization rotation
190
Comparison of Three Unsupervised Segmentation Algorithms for SAR Data in Urban Areas
191
Comparison of three vertical search spiders
192
Comparison of three wave mixing in photorefractive and nematic liquid crystals
193
Comparison of Three Wind Turbine Controller Synthesis Methodologies
194
Comparison of Three Years of Terra and Aqua MODIS Aerosol Optical Thickness Over the Global Oceans
195
Comparison of three-level torque hysteresis controllers for direct torque control
196
Comparison of three-phase 12/8 structure switched reluctance machine and four-phase 16/12 structure switched reluctance machine
197
Comparison of three-phase ac-ac matrix converter and voltage dc-link back-to-back converter topologies based on EMI filter
198
Comparison of Three-Phase DC-DC Converters vs. Single-Phase DC-DC Converters
199
Comparison of three-phase distribution transformer banks against three-phase distribution transformers
200
Comparison of three-phase four-wire converters for distributed generation
201
Comparison of Three-Phase Modulation with Two-Phase and Four-Phase Modulation
202
Comparison of three-phase PWM rectifiers to interface Ac grids and bipolar Dc active distribution networks
203
Comparison of three-phase three-level Z-source inverter and quasi-Z-source inverter characteristics
204
Comparison of Three-Terminal Mesfet Varactor with Two-Terminal Mesfet Varactor in X-Band Tunable Active Bandpass Filter
205
Comparison of threshold energy of selectively excited YAlO
3
:Er and YAG:Er lasers
206
Comparison of threshold setting rules for the mean acquisition times of a DS spread spectrum receiver in certain type of fading
207
Comparison of threshold setting rules for the probability of acquisition in a DS spread spectrum receiver
208
Comparison of threshold transient upset levels induced by flash X-rays and pulsed lasers
209
Comparison of thresholding methods for breast tumor cell segmentation
210
Comparison Of Thresholding Techniques For TV-to-IR Image Registration
211
Comparison of thresholding techniques using synthetic images and ultimate measurement accuracy
212
Comparison of threshold-voltage shifts for uniaxial and biaxial tensile-stressed n-MOSFETs
213
Comparison of Throughput Performance for the IEEE 802.11a and 802.11g Networks
214
Comparison of TH-SS and DS-SS with sleeping protocol for LDR-UWB network
215
Comparison of thyristor switched capacitor and voltage source GTO inverter compensators for single phase feeders
216
Comparison of thyristor switched capacitor and voltage source GTO inverter type compensators for single phase feeders
217
Comparison of thyristor vs. chopper rectifiers in a common application
218
Comparison of thyristor-controlled reactors and voltage-source inverters for compensation of flicker caused by arc furnaces
219
Comparison of THz and near-IR scattering effects from air-solid interfaces
220
Comparison of THz emitters and detectors pumped at 1560 nm: DAST, ErAs:InGaAs and LTG GaAs
221
Comparison of Ti and Ni salicides as regards the electrical conductance of silicided films
222
Comparison of Ti and Pt silicon carbide Schottky rectifiers
223
Comparison of TID Effects in Space-Like Variable Dose Rates and Constant Dose Rates
224
Comparison of TID response and SEE characterization of single- and multi-level high density NAND flash memories
225
Comparison of TID Response of Micron Technology Single-Level Cell High Density NAND Flash Memories
226
Comparison of tightly power-constrained performances for opportunistic amplify-and-forward relaying with partial or full channel information
227
Comparison of time- and angular dispersion between channel sounding measurements and ray tracing in CoMP-MIMO channels
228
Comparison of time and frequency based methods for electrode distance estimation from surviving tissue
229
Comparison of time and frequency domain antenna measurements
230
Comparison of time and frequency domain approaches for blood velocity estimation in small vessels using high frequency ultrasound
231
Comparison of time and frequency domain interpolation implementations for MB-OFDM UWB transmitters
232
Comparison of time- and frequency domain measurement results for product related card and MCM transmission lines up to 65 GHz
233
Comparison of time and frequency domain methods for indirect lightning effect computation: A case study
234
Comparison of time and frequency domain methods for the feedback on chest compression rate
235
Comparison of time and frequency domain single and double differential schemes for OFDM UWB systems
236
Comparison of time- and frequency-domain based LF-model fitting methods for voice source parametrisation
237
Comparison of time base nonlinearity measurement techniques
238
Comparison of Time Codes for Source Encoding
239
Comparison of time coordination feasibility criteria for a subtransmission system protection scheme
240
Comparison of time delay estimators in medical ultrasound
241
Comparison of time delay processing methods in control system
242
Comparison of time difference variations of photoplethysmographic signals with different wavelengths
243
Comparison of time domain algorithms for estimating aortic characteristic impedance in humans
244
Comparison of time domain and frequency domain assessments of arterial wave reflections
245
Comparison of time domain and frequency domain electromagnetic susceptibility testing
246
Comparison of time domain and frequency domain equalization for HSDPA channel
247
Comparison of time domain and frequency domain equalizers for indoor UWB systems
248
Comparison of Time Domain and Frequency Domain State Feedbacks
249
Comparison of time domain package characterization techniques using TDR and VNA
250
Comparison of time frequency analysis techniques for ultrasonic NDE signal
251
Comparison of time guard-band and coding strategies for OFDM digital cellular radio in multipath fading
252
Comparison of Time Integration Methods in Magnetomechanical Problems
253
Comparison of time series similarity measures for plagiarism detection in music
254
Comparison of time slot allocation strategies for CDMA/TDD systems
255
Comparison of time slot allocation strategies for CDMA/TDD systems
256
Comparison of time synchronization techniques in a distributed collaborative swarm system
257
Comparison of Time Transfer Using GPS Carrier Phase and Multichannel Two-Way Data in East Asia
258
Comparison of time/frequency methods applied to uterine EMG for bursts instantaneous frequency tracking
259
Comparison of time-averaged likelihood-ratio detection with other detection procedures
260
Comparison of time-based nonactive power definitions for active filtering
261
Comparison of Time-Based Probability Methods for Estimating Energy Storage Requirements for an Off-Grid Residence
262
Comparison of time-decay of read-back signals in keepered and non-keepered media
263
Comparison of Time-Decay of Read-Back Signals in Keepered and Non-Keepered Media
264
Comparison of time-domaim and frequency-domain characterization procedures for printed circuit board interconnects
265
Comparison of time-domain and frequency domain polynomial fitting
266
Comparison of time-domain ICA, frequency-domain ICA and multistage ICA for blind source separation
267
Comparison of time-domain methods for two-end PD location in power cables
268
Comparison of time-domain responses of reflector and phased array antennas
269
Comparison of time-domain responses of reflector and phased array antennas
270
Comparison of time-domain responses of reflector and phased array antennas
271
Comparison of time-domain uniform asymptotic solution with experimental-numerical results for transient scattered fields by a cylindrically curved open surface
272
Comparison of time-frequency analysis performance on hearts and murmurs
273
Comparison of Time-Frequency Classification Methods for Intelligent Automatic Jettisoning Device of Helmet- Mounted Display Systems
274
Comparison of time-frequency distribution techniques for analysis of simulated Doppler ultrasound signals of the femoral artery
275
Comparison of time-frequency distributions for Doppler spectral estimation
276
Comparison of time-frequency methods using spectral turbulence to identify late potentials in patients with ventricular conduction defects
277
Comparison of Time-Harmonic and Transient Finite Element Analyses for Eddy Currents in the Stator Clamping System of Synchronous Generators
278
Comparison of time-harmonic and transient finite element calculation of a squirrel cage induction machine for electric vehicles
279
Comparison of time-lens configurations under different repetition rate
280
Comparison of time-step sizes for stability and convergence in transient analysis of MOSFET circuits
281
Comparison of time-to-failure of GeSi and Si bipolar transistors
282
Comparison of Time-Variant Coherence Algorithms in Single-Trial: A Dynamic Analysis
283
Comparison of time-varying and non-time-varying Volterra analysis for finding distortion contributions in mixers
284
Comparison of timing noise properties of carbon nanotubes, graphene and graphene oxide as saturable absorbers for a mode-locked Er-doped fiber laser
285
Comparison of TiO
2
-doped SiO
2
films from two organosilicon precursors
286
Comparison of TiSi2 and WSI2 Silicided Shallow Junctions for Sub-Micron CMOSs
287
Comparison of tissue ablation with pulsed holmium and thulium lasers
288
Comparison of tissue indentation and CT measured tissue density measurements
289
Comparison of tissue optical properties for localized and homogeneous model of light absorption by blood
290
Comparison of tissue optical properties for localized and homogeneous model of light absorption by blood
291
Comparison of tissue segmentation algorithms in neuroimage analysis software tools
292
Comparison of TLM simulations and experiments in EMC problems
293
Comparison of TMI-2 Offsite Emergency Monitoring Experiences with Present Federal Guidance
294
Comparison of Tn1546 element of vancomycin resistant Staphylococcus aureus isolated from burned patients in Sulaimani hospital
295
Comparison of TOA and RSS based techniques for RF localization inside human tissue
296
Comparison of TOF and non-TOF iterative reconstruction at low statistics
297
Comparison of Tohoku LLS data and lightning current waveforms in winter
298
Comparison Of Token Holding Time Strategies For A Static Token Passing Bus
299
Comparison of Tolerance Controls for Open-Switch Fault in a Grid-Connected T-Type Rectifier
300
Comparison of Tolerances in Constructions of Microstrip Filters on Coupled Lines
301
Comparison of tolerant fuzzy c-means clustering with L
2
- and L
1
-regularization
302
Comparison of Tone compensation and Spring assistance for hand rehabilitation in HEXORR
303
Comparison of tools and simulators for control system security studies
304
Comparison of Tools for Data Mining and Retrieval in High Volume Data Stream
305
Comparison of top and bottom-contact organic thin film transistors for analog circuit applications
306
Comparison of Top-Gate and Bottom-Gate Amorphous InGaZnO Thin-Film Transistors With the Same SiO
2
/a-InGaZnO/SiO
2
Stack
307
Comparison of Topography- and Aperture-Dependent Motion Compensation Algorithms for Airborne SAR
308
Comparison of topologies for linear drives in industrial material handling and processing applications
309
Comparison of topologies of hybrid active power filter
310
Comparison of topologies suitable for capacitor charging systems
311
Comparison of topologies to drive the machine of an automotive electrical power steering with higher voltage levels
312
Comparison of torque control bandwidth of HF injection, SMO and FPE Direct Torque control IPMSMS drives
313
Comparison of torque densities in alternate wound-field switched flux machines
314
Comparison of torque estimators for PMSM
315
Comparison of torque responses of the interior permanent magnet motor under PWM current and direct torque controls
316
Comparison of torque ripple minimization control techniques in Surface-Mounted Permanent Magnet Synchronous Machines
317
Comparison of torque-speed-characteristic of Flux Switching Machines with Permanent Magnet excitation and hybrid excitation
318
Comparison of torque-to-copper loss ratio in switched reluctance and induction motors for EV applications
319
Comparison of total dose effects on a voltage reference fabricated on bonded-wafer and polysilicon dielectric isolation
320
Comparison of total dose effects on micropower op-amps: bipolar and CMOS
321
Comparison of total dose responses on high resolution analog-to-digital converter technologies
322
Comparison of total dose responses on high resolution analog-to-digital converter technologies
323
Comparison of total system capacity for band sharing between CDMA based non-geostationary satellite-PCNs under imperfect power control conditions
324
Comparison of total water vapor columns retrieved from satellite measurements: microwave radiances from AMSU-B and visible spectra from GOME/SCIAMACHY
325
Comparison of touch and speech-enabled IVR systems in low literacy users
326
Comparison of touch and step voltages between IEEE Std 80 and IEC 479-1
327
Comparison of Tourism Data Using Double Ranking
328
Comparison of Track Densities of Discrete Track Media and Continuous Media: A Numerical Model
329
Comparison of track fusion rules and track association metrics
330
Comparison of tracker-based to tracker-less haptic device calibration
331
Comparison of tracking algorithms for single layer threshold networks in the presence of random drift
332
Comparison of tracking codes for the International Linear Collider
333
Comparison of tracking techniques applied to digital PIV
334
Comparison of Tracking Test Methods
335
Comparison of Tracking/association Methods For Low SNR Targets
336
Comparison of tracklet fusion and distributed Kalman filter for track fusion
337
Comparison of trade decision strategies in an equity market GA trader
338
Comparison of traditional and opportunistic multihop routing in wireless networking scalability
339
Comparison of traditional and web-based education - case study “BigBlueButton”
340
Comparison of traditional haar classifiers used in face detection applications with an alternative classifier for four stages filtering
341
Comparison of Traditional Inverters and Z -Source Inverter for Fuel Cell Vehicles
342
Comparison of Traditional Inverters and Z-Source Inverter
343
Comparison of traditional inverters and Z-source inverter for fuel cell vehicles
344
Comparison of traditional over WEB-Based Education: Case study "Adobe Flash"
345
Comparison of traditional two-stage buck-boost voltage source inverter and diode-assisted buck-boost voltage source inverter
346
Comparison of traffic and quality characteristics of rate-controlled wavelet and DCT video
347
Comparison of traffic assignments in evacuation modeling
348
Comparison of traffic control issues between regular PONs and superPONs
349
Comparison of traffic dependent wireless sensor network protocols
350
Comparison of traffic management schemes for ATM networks
351
Comparison of traffic performance predictions for three different handoff-region models
352
Comparison of traffic speed and travel time predictions on urban traffic network
353
Comparison of training algorithms and network architectures
354
Comparison of training, blind and semi blind equalizers in MIMO fading systems using capacity as measure
355
Comparison of trajectories formed with kinect motion capture data
356
Comparison of trajectory between modelling and experiment for J-PARC linac
357
Comparison of trajectory generation methods for a human-robot interface based on motion tracking in the Int
2
Bot
358
Comparison of trajectory tracking controllers for emergency situations
359
Comparison of Transconductance Reduction Techniques for the Design of a Very Large Time-Constant CMOS Integrator
360
Comparison of Transfer and Erosion Shapes on Ag and AgSnO2 Contacts Caused by Break Arc Discharges in a DC Inductive Load Circuit
361
Comparison of transfer curve induced distortions to distortions in nonlinear physical TWT models
362
Comparison of transformation to low-resistivity phase and agglomeration of TiSi
2
and CoSi
2
363
Comparison of Transformer Detailed Models for Fast and Very Fast Transient Studies
364
Comparison of transformer loss prediction from computed and measured flux density distribution
365
Comparison Of Transformer Loss Predictions From Computed And Measured Flux Density Distributions
366
Comparison of transformerless converter topologies for photovoltaic application concerning efficiency and mechanical volume
367
Comparison of transformerless ring modulators and cross modulators
368
Comparison of Transient and Power Frequency-Induced Voltages on a Pipeline Parallel to an Overhead Transmission Line
369
Comparison of transient and steady-state performances analysis for a dual-channel switched reluctance machine operation under different modes
370
Comparison of transient and steady-state simulation methods on internal faults of salient-pole synchronous machine
371
Comparison of transient behaviors of wind turbines with DFIG considering the shaft flexible models
372
Comparison of transient performance in a peak current-mode flyback converter
373
Comparison of transient performance in the control of soft tissue grasping
374
Comparison of transient performance of superconducting and conventional generators in a multimachine system
375
Comparison of transient phenomena when switching shunt reactors on the line´s two terminals and station busbar
376
Comparison of transient reduction techniques in EDFA
377
Comparison of transient stability analysis and large-scale real time digital simulation
378
Comparison of Transient Stability between Wind Farm Based on DFIG and Traditional Power Plant in an Actual Grid
379
Comparison of transient thermal parameters for different die connecting approaches
380
Comparison of Transient Thermal Parameters for Different Die-Connecting Approaches
381
Comparison of transient time-domain and harmonic quasi-static solution of electrical and thermal coupled numerical stress grading calculations for large rotating machines
382
Comparison of Transistor and SCR Deflection Circults for Color Television
383
Comparison of transistor-based power amplifier amplitude response linearization methods
384
Comparison of transit detectors in ocean-like environments
385
Comparison of transition metal nitride coatings produced using two plasma-based deposition techniques
386
Comparison of transmission acquisition approaches for SPECT nonuniform attenuation compensation
387
Comparison of transmission acquisition approaches for SPECT nonuniform attenuation compensation
388
Comparison of transmission- and emission-based attenuation correction for TOF-PET/MRI
389
Comparison of transmission and reflection all-pass phasers for analogue signal processing
390
Comparison of transmission and reflection spectrum of angular dependent surface plasmon resonances of gold nanoslits
391
Comparison of transmission approaches in vehicular standardization MIMO channels
392
Comparison of transmission cost allocation methods case study: DET WEST power system
393
Comparison of transmission cost allocation methods in a multi-area framework
394
Comparison of transmission equipment outage performance in Canada, USA and China
395
Comparison of transmission losses and voltage drops of GIL(Gas Insulated transmission line) and overhead transmission lines
396
Comparison of Transmission Performance of 40-Gb/s Optical Duobinary and DCS-RZ Signals Using 10- and 40-Gb/s LiNbO
3
Mach–Zehnder Modulators
397
Comparison of Transmission Performances for CO-SCFDE and CO-OFDM Systems
398
Comparison of transmission quality dimensions of narrowband, wideband, and super-wideband speech channels
399
Comparison of transmission resonance phenomena through small coupling apertures between two kinds of transmission resonance structures
400
Comparison of transmission schemes for framed ALOHA based RFID protocols
401
Comparison of transmission tariff methods in a free market for electricity
402
Comparison of transmission tower models for evaluating lightning performance
403
Comparison of transmit array algorithms for code division multiple access downlinks operating in the frequency division duplexing mode
404
Comparison of transmitted- and stored-reference systems for ultra-wideband communications
405
Comparison of transmultiplexers for multicarrier modulation
406
Comparison of Transparent and Opaque Optical Transport Network Designs
407
Comparison of transparent back contacts for CdTe top cells in tandem thin-film photovoltaic devices
408
Comparison of transparent versus opaque interconnecting nodes of OADM rings with respect to failure location
409
Comparison of Transport Capacity Requirements in 3GPP R99 and HSDPA IP-based Radio Access Networks
410
Comparison of transverse and spin-lattice relaxation based electron paramagnetic resonance oxygen images
411
Comparison of Travel Techniques in a Complex, Multi-Level 3D Environment
412
Comparison of Travel Time Estimation Using Analysis and Queuing Theory to Field Data Along Freeways
413
Comparison of travel times estimation using intelligent infrastructure and floating car data
414
Comparison of tree and straight-line clocking for long systolic arrays
415
Comparison of tree encoding schemes for Biobjective Minimum Spanning Tree problem
416
Comparison of tree height estimations from C and L-band InSAR data
417
Comparison of Tree-based and Mesh-based coarse-grained FPGA architectures
418
Comparison of tree-based reliable multicast protocols for many-to-many sessions
419
Comparison of Tree-Child Phylogenetic Networks
420
Comparison of trellis coding and low rate convolutional coding for CDMA
421
Comparison of trench gate IGBT and CIGBT devices for 3.3kV high power module applications
422
Comparison of Trench Gate IGBT and CIGBT Devices for Increasing the Power Density From High Power Modules
423
Comparison of trend detection algorithms in the analysis of physiological time-series data
424
Comparison of trend extraction methods for calculating performance loss rates of different photovoltaic technologies
425
Comparison of Trends in Organic Loadings and Dissolved Oxygen Concentrations in Delaware and Narragansett Bays
426
Comparison of Tri-gate FET Characteristics for Various Hydrogen Annealing Process Conditions
427
Comparison of trigger requirements for gas switches for linear transformer drivers
428
Comparison of trimming techniques for sub-lithographic silicon structures
429
Comparison of triple negative breast cancer between Asian and western data sets
430
Comparison of TRL calibration vs. 2x thru de-embedding methods
431
Comparison of TRMM 3B42 products with surface rainfall over bangladesh
432
Comparison of TRMM and NSCAT observations of surface backscatter over the Amazon rain forest
433
Comparison of TRMM estimated rainfall with ground truth over Calcutta
434
Comparison of TRMM PR V6 and V7 focusing heavy rainfall
435
Comparison of TRMM TMI and PR Version 5 and 6 Precipitation Data Products Under Cyclonic Weather Conditions
436
Comparison of Tropical Atmosphere Ocean (TAO) Array Flux sensors at 00° 140°W
437
Comparison of Tropospheric Reception at 44.1 Mc with 92.1 Mc over the 167-Mile Path of Alpine, New Jersey, to Needham, Massachusetts
438
Comparison of true running at different concepts of controlling brushless DC-motors
439
Comparison of trusted systems evaluation criteria
440
Comparison of TSC and space-charge in epoxy resin and polycarbonate
441
Comparison of TSS application layer protocols: TCAP (Q.771-775) and ROSE (X.219/X.229)
442
Comparison of TSV-based PDN-design effects using various stacking topology methods
443
Comparison of TSVCIS voice at 8000 and 12000 bps VERSUS CVSD at 16000 bps
444
Comparison of tubular and planar design of a micro linear generator for vibration energy harvesting
445
Comparison of tumor microvasculature assessment via Ultrafast Doppler Tomography and Dynamic Contrast Enhanced Ultrasound
446
Comparison of tuning procedures based on evolutionary algorithm for multi-region fuzzy-logi PID controller for non-linear plant
447
Comparison of tunnel currents through SiO
2
, HfO
2
, Ta
2
O
5
, ZrO
2
and Dy
2
O
3
dielectrics in MOS devices for ultra large scale integration using first principle calculations
448
Comparison of TUPÃ risk assessment software with SIRAC software applied to a heritage building in Argentina
449
Comparison of Turbidity Measurement by MODIS and AVHRR Images
450
Comparison of turbine-generator shaft torsional response predicted by frequency domain and time domain methods following worst-case supply system events
451
Comparison of Turbo Decoder and Packet Acquisition Error Rates in Frequency Hop-Spread Systems
452
Comparison of turbo-code decoders applied to short frame transmission systems
453
Comparison of turbulence measurements from a SonTek ADV and a nobska MAVS
454
Comparison of turbulent attenuation determined by rytov and available power method
455
Comparison of two 12 V voltage regulator module topologies
456
Comparison of two 3D implementations of TOF scatter estimation in 3D PET
457
Comparison of two 5-phase Permanent Magnet machine winding configurations. Application on naval propulsion specifications.
458
Comparison of two adaptive control methods for robotic applications
459
Comparison of two adaptive controllers
460
Comparison of two adaptive identification methods for monitoring and diagnosis of an experimental nuclear reactor
461
Comparison of two adaptive methods for time delay estimation
462
Comparison of Two Adaptive Methods for Time Delay Estimation
463
Comparison of two advanced modulation strategies for a hybrid cascaded converter
464
Comparison of Two Advanced Substrate Technologies in a High End Networking Application
465
Comparison of two AI methods for colonic tissue image classification
466
Comparison of two algorithms for accurate harmonic analysis of periodic arbitrary signals using nonsynchronous digital sampling
467
Comparison of two algorithms for correcting zero-Doppler clutter in turntable ISAR imagery
468
Comparison of two algorithms for decoding BCH codes
469
Comparison of Two Algorithms of Attribute Reduction Based on Fuzzy Rough Set
470
Comparison of Two Alternate Methods to Establish an Interrupted Energy Assessment Rate
471
Comparison of Two Alternate Methods to Establish an Interrupted Energy Assessment Rate
472
Comparison of two alternative policies to reduce no-show in appointment system
473
Comparison of two AMC´s on a high-permittivity substrate
474
Comparison of Two Analog Feedback Schemes for Transmit Side MIMO Channel Estimation
475
Comparison of two analytical approaches to the analysis of grillages
476
Comparison of two analytical methods: differential scanning calorimetry and shrink temperature
477
Comparison of Two and Three-Dimensional Optical Tomographic Image Reconstructions of Human Finger Joints
478
Comparison of two- and three-level rate equations in the modeling of quantum-well lasers
479
Comparison of two- and three-phase motors
480
Comparison of Two- and Three-Phase Motors
481
Comparison of two angle of arrival averaging strategies
482
Comparison of Two Anisotropic Layer Models Applied to Induction Motors
483
Comparison of two Anisotropic Layer models applied to induction motors
484
Comparison of two approaches for adaptive feedforward compensation in active vibration control with mechanical coupling
485
Comparison of two approaches for multiple-model identification of a pH neutralization process
486
Comparison of two approaches for the design of microstrip lossy filters
487
Comparison of Two Approaches on Terrain Change Detection and Updating
488
Comparison of two approaches to a positional servo control
489
Comparison of two approaches to compute magnetic field in problems with random domains
490
Comparison of two approaches to improve functional BIST fault coverage
491
Comparison of two approaches to model the macromolecule spectrum for the quantification of short TE
1
H MRS spectra
492
Comparison of two approaches to volume quantification for free-hand ultrasound scanning of mouse hearts
493
Comparison of two approximation models for near-field of BTS antennas
494
Comparison of two architectures for fibre optic distribution inside Ka-band communication satellites
495
Comparison of two architectures for implementation of the discrete cosine transform
496
Comparison of two ARMA estimators
497
Comparison of two ARO protocols in a Rayleigh fading channel
498
Comparison of two ARQ protocols in a Rayleigh fading channel
499
Comparison of two augmented PDA filters
500
Comparison of two automated methods for QT interval measurement
501
Comparison of Two Bare-Soil Reflectivity Models and Validation With L-Band Radiometer Measurements
502
Comparison of two battery equivalent circuit models for state of charge estimation in electric vehicles
503
Comparison of two biasing Monte Carlo methods for calculating outage probabilities in systems with multisection PMD compensators
504
Comparison of two bioimpedance spectroscopy techniques in the assessment of body fluid volumes
505
Comparison of two black-box model identification methods applied on a VSC with LCL filter
506
Comparison of two bounds of the quantum correlation set
507
Comparison of two bridge routing approaches
508
Comparison of two bulk power adequacy assessment programs: TRELSS and COMREL
509
Comparison of Two Calculation Methods of Flicker Caused by Wind Power
510
Comparison of two calculation methods of the optimal switching instants of a hybrid dynamic system
511
Comparison of two calibration methods for a package stress measurement testchip
512
Comparison of two candidate elements for a 30-90 MHz radio telescope array
513
Comparison of Two Carrier Phase Estimation Schemes in Optical Coherent Detection Systems
514
Comparison of two cesium fountain primary frequency standards
515
Comparison of two channel estimation methods
516
Comparison of two charge packet models under dc electric fields
517
Comparison of two circuit-level simulation techniques for power-processing circuits
518
Comparison of two class E amplifiers for EER transmitter
519
Comparison of two classification methods for Musical Instrument identification
520
Comparison of Two CMOS Front-End Transimpedance Amplifiers for Optical Biosensors
521
Comparison of two coaxial probes for the non-destructive evaluation of a steel fiber reinforced concrete layer
522
Comparison of two coding technique dedicated to UWB V2V communication ystem
523
Comparison of two commercial patellofemoral prostheses by means of computational modeling
524
Comparison of two common configurations of LSRM: Transverse flux and longitudinal flux
525
Comparison of two common pipeline structures
526
Comparison of two compact 2D-FDFD methods and their application to extraction of circuit parameters
527
Comparison of two compensation control strategies for SHAF in 3ph 4wire system by using PI controller
528
Comparison of two compensation control strategies for shunt active power filter
529
Comparison of two compensation control strategies for shunt active power filter in three-phase four-wire system
530
Comparison of two component frameworks: the FIPA-compliant multi-agent system and the web-centric J2EE platform
531
Comparison of two computationally feasible image deblurring techniques for smartphones
532
Comparison of two computer-aided cardiotocography systems: the influence of indirectly obtained input trades
533
Comparison of two concentrated winding topologies applied on an axial flux permanent magnet machine
534
Comparison of two concepts of gyro-traveling-wave tubes (gyro-TWTs)
535
Comparison of two concepts of the controlling devices applied to the flexible cell
536
Comparison of two configurations of a four-reflector beam-waveguide for a large space communication facility
537
Comparison of two connection possibilities of the clamp capacitor in the Active-Clamped ZVS Current-Fed Half-Bridge converter
538
Comparison of two continuous GPS carrier-phase time transfer techniques
539
Comparison of two control algorithms for forward DC-DC converters
540
Comparison of two control approaches for a linear axis with pneumatic muscles using one or two valves
541
Comparison of two control approaches for stability enhancement using STATCOM with active power injection capability
542
Comparison of two control approaches of static VAr generators for compensating source voltage unbalance in three-phase three-wire systems
543
Comparison of two control schemes for operating an ultrasonic scanning device
544
Comparison of two control strategies in development of high-torque electronically commutated drive
545
Comparison of two control strategy for three-phase voltage source PWM rectifier
546
Comparison of two convolutional orthogonal coding techniques for CDMA radio communications systems
547
Comparison of Two Cost Functions for Evolutionary Synthesis of Control Law for Higher Periodic Chaotic Logistic Equation
548
Comparison of two coupling models for lightning-induced overvoltage calculations
549
Comparison of two CS-SSB modulators used in bidirectional carrier distributed long-reach passive optical network
550
Comparison of two current modulation strategies for matrix converters under unbalanced input voltage conditions
551
Comparison of two current modulation strategies for matrix converters under unbalanced input voltage conditions
552
Comparison of two current predictive control methods for a segment winding permanent magnet linear synchronous motor
553
Comparison of two data hazard handling schemes for asynchronous pipelined processors
554
Comparison of two decade-bandwidth feeds for reflector antennas: The Eleven Antenna and quadridge horn
555
Comparison of two designs for the multifunction vehicle bus
556
Comparison of two Detection Algorithms for Pipeline Leaks
557
Comparison of two detection combination algorithms for phased array radars
558
Comparison of two detection-based adaptive variable update rate algorithms for tracking targets with phased array radars
559
Comparison of two development boards for embedded system functionalities — Intel Galileo and Intel Atom board SYS9400
560
Comparison of two diagnosis methods based on switching voltage pattern for IGBTs open-circuit faults in voltage-source inverters
561
Comparison of two different approaches for brain activity detection in fMRI: SPM-MAP and SPM-GLM
562
Comparison of two different approaches for joint source-channel decoding of variable length codes
563
Comparison of two different cell topologies for a multilevel power supply to achieve high efficiency envelope amplifier
564
Comparison of two different classifiers for mental tasks-based Brain-Computer Interface: MLP Neural Networks vs. Fuzzy Logic
565
COMPARISON OF TWO DIFFERENT CONCEPTS TO REALIZE AN OPENING SWITCH WITH HIGH REPETITION RATE
566
Comparison of two different dimension reduction methods in classification by arithmetic, geometric and harmonic similarity measure
567
Comparison of two different electrical power architecture for electric vehicles applications based on Fuel Cell and supercapacitors
568
Comparison of two different estimation methods of wind speed extreme values
569
Comparison of two different fault-tolerant switched reluctance machines for fuel pump drive in aircraft
570
Comparison of Two Different High Performance Mixed Signal Controllers for DC/DC Converters
571
Comparison of two different isolation schemes for n-type InP by helium implantation
572
Comparison of two different methods for coherent averaging in online ECG analysis
573
Comparison of two different methods to produce thin-window silicon drift detectors
574
Comparison of two different PNN training approaches for satellite cloud data classification
575
Comparison of two different PNN training approaches for satellite cloud data classification
576
Comparison of two different shape descriptions in the half-space inverse problem
577
Comparison of two different similar speech and gestures multimodal interfaces
578
Comparison of two different simulation methods for the design of reflect-arrays
579
Comparison of two different structure of permanent magnet dual mechanical port machine
580
Comparison of two different techniques for long term magnetic measurements in nuclear fusion research
581
Comparison of two different text-to-speech alignment systems: Speech synthesis based vs. hybrid HMM/ANN
582
Comparison of two different traction systems for subway application using Energetic Macroscopic Representation
583
Comparison of Two Different Upsampling Methods Used for Interpolation in Symbol Timing Recovery in Digital Receivers
584
Comparison of two differential GPR systems for imaging objects under a reflection configuration
585
Comparison of two distance based alignment methods in medical imaging
586
Comparison of two distinctive model driven Web service orchestration proposals
587
Comparison of two distributed hydrological model for soil moisture simulation
588
Comparison of Two Disturbance Minimizing Techniques for Nonlinear Systems
589
Comparison of two DOA tracking implementations for SDMA
590
Comparison of Two Document Clustering Techniques which use Neural Networks
591
Comparison of two dwell code acquisition of DS signal using different threshold setting rules
592
Comparison of two dynamic channel assignment schemes under packet data traffic
593
Comparison of two efficient control strategies for two-wheeled balancing robot
594
Comparison of two efficient ML algorithms for high resolution sources tracking-time recursive implementation
595
Comparison of two eigenstructure algorithms for lossless multirate filter optimization
596
Comparison of two electrode arrays for liner leakage location at landfills
597
Comparison of Two Error-Space Estimate Method for Space-Earth Optical Communication
598
Comparison of two estimation methods of the mean time-interval between software failures
599
Comparison of two estimators of time-frequency interdependencies between nonstationary signals: application to epileptic EEG
600
Comparison of Two Evolvable Systems in the Automated Analog Circuit Synthesis
601
Comparison of two exploratory data analysis methods for fMRI: unsupervised clustering versus independent component analysis
602
Comparison of two extended observers for the resistance estimation of an induction machine
603
Comparison of two families of entropy-based classification measures with and without feature selection
604
Comparison of two fast algorithms for CWT computations
605
Comparison of two fast reconstruction methods for a cylindrical PET camera
606
Comparison of Two Fault Classification Schemes in Non-effectively grounded distribution system and Their Combination
607
Comparison of two FDTD near-field to near-field transformations applied to pulsed antenna problems
608
Comparison of Two Feature Extraction Methods Based on Maximization of Mutual Information
609
Comparison of Two Feature Selection Methods in Intrusion Detection Systems
610
Comparison of two feedforward design methods aiming at accurate trajectory tracking of the end point of a flexible robot arm
611
Comparison of Two Femtosecond Optical Frequency Combs at NPL
612
Comparison of two FFT structures for fractionally-spaced frequency domain equalizer
613
Comparison of two FFT-based demodulation schemes for
M
-ary FSK
614
Comparison of two filter media for nuclear, chemical and biological filter applications
615
Comparison of Two Filtering Techniques in Differential LC VCO Using Asymmetric Tank Structure
616
Comparison of Two Fitness Functions for GA-Based Path-Oriented Test Data Generation
617
Comparison of two flat reflector-type designs for dual-polarization, dual-band operation
618
Comparison of two flattening techniques on a double-pass erbium-doped superfluorescent fiber source for fiber-optic gyroscope
619
Comparison of two flow analysis software for injection moulding tool design
620
Comparison of Two Forward Error Correction Approaches for Packet Protection in HDTV with Variable Bit Rate Transmission
621
Comparison of Two Frame Rate Conversion Schemes for Reducing LCD Motion Blurs
622
Comparison of Two Frameworks for Measuring the Stability of Gene-Selection Techniques on Noisy Class-Imbalanced Data
623
Comparison of two frequency reuse schemes in fixed relay system
624
Comparison of two FSCW PM machines for integrated traction motor/generator
625
Comparison of two fuzzy logic controller schemes for position control of AR.Drone
626
Comparison of two fuzzy set-based logics: similarity logic and possibilistic logic
627
Comparison of Two Gabor Texture Descriptor for Texture Classi?cation
628
Comparison of two general control methods for 3-phase to 2-phase direct converters
629
Comparison of two generalized logistic regression models; a case study
630
Comparison of two generating kernels in linked-pyramid segmentation of noisy images
631
Comparison of two generations of textile MIMO antennas at IHF
632
Comparison of two graphical models approaches for the modelling of multi-components system´s reliability
633
Comparison of two grid connected photovoltaic systems GCPVS with different dimensioning factor DF during three years operation in Bogotá - Colombia
634
Comparison of two groups of survival data using nonparametric predictive inference
635
Comparison of two guided scrambling schemes for optical disks
636
Comparison of two guided scrambling schemes for optical disks
637
Comparison of two gyroklystron concepts: frequency multiplication versus operation at a given cyclotron harmonic
638
Comparison of two H
∞
loop-shaping robust autopilot structure configurations for a 155mm spin-stabilized canard-guided projectile
639
Comparison of two heuristic approaches to hydro unit commitment
640
Comparison of two high efficiency DC-to-AC converters
641
Comparison of two high frequency converters for capacitive power transfer
642
Comparison of two high-end infrared thermography systems with different spectral sensitivity for thermal investigations of sensor heater elements
643
Comparison of two High-Frequency Noise Characterization Methods for SiGe HBTs
644
Comparison of two hyperspectral temperature and emissivity separation methods: CBTES and ISSTES
645
Comparison of two ICCS conductors for MHD application
646
Comparison of Two Image and Inertial Sensor Fusion Techniques for Navigation in Unmapped Environments
647
Comparison of Two Image Segmentation Algorithms
648
Comparison of two IMM tracking and classifier architectures based on Extended and Unscented Kalman Filter with CRLB
649
Comparison of Two Impulse Calibrators with a High Resolution Digitizer
650
Comparison of two impulse calibrators with a high-resolution digitizer
651
Comparison of two impulse response identification techniques
652
Comparison of two in-line MZI concentration sensors using FDTD method
653
Comparison of two interactive finite-element programs for analysis of optical and microwave waveguides
654
Comparison of two Interconnected Observers for Sensorless Induction Motor Control via a Low Frequencies Benchmark
655
Comparison Of Two Interior Permanent-Magnet Motors With Improved Fault-Tolerance
656
Comparison of two interleaving techniques for CDMA radio communications systems
657
Comparison of two interleaving techniques for coded hybrid DS/SFH-SSMA
658
Comparison of two interval models for interval-valued particle swarm optimization
659
Comparison of two intrinsic efficiency calibration method for low loss waveguide section
660
Comparison of Two Intrusion Detection Schemes for Sparsely Connected Ad Hoc Networks
661
Comparison of two inversion methods for retrieval of soil moisture and surface roughness from polarimetric radar observation of soil surfaces
662
Comparison of Two In-Wheel Permanent Magnet Motors for Military Applications
663
Comparison of two iterative estimation procedures
664
Comparison of two Josephson array voltage standard systems using a set of Zener references
665
Comparison of two Josephson array voltage standard systems using a set of Zener references
666
Comparison of Two Kinds of Algebraic Algorithms for Solving Angular Velocity in GFSINS
667
Comparison of two kinds of compensation schemes on inductive power transfer systems for electric vehicle
668
Comparison of Two Kinds of Large Displacement Precision Parallel Mechanisms for Micro/nano Positioning Applications
669
Comparison of Two Kinds of Scaling Methods in Two-Body Problems
670
Comparison of two LAN bridge approaches
671
Comparison of two leading algorithms for PLA test pattern generation
672
Comparison of Two Learning Algorithms in Modelling the Generator´s Learning Abilities
673
Comparison of Two Learning Methods of the Tree Augmented Naïve Bayesian Network Classifier
674
Comparison of two light reflector patterns designed for PMT-Quadrant-Sharing (PQS) Time-of-Flight PET detectors
675
Comparison of two lightweight protocols for smartphone-based sensing
676
Comparison of Two Likelihood-Based Target Detection Methods in the Presence of Interference
677
Comparison of two linear models for estimating brain deformation during surgery using finite element method
678
Comparison of two linear models of dynamic cerebral autoregulation
679
Comparison of two line-feeding modes based on Mixed Flow Assembly Field Force Model
680
Comparison of two loop-free decomposition methods
681
Comparison of Two Low Complexity Multiple Access Schemes
682
Comparison of Two Low-Loss Semiconductor Switches (Correspondence)
683
Comparison of two LQG-based methods for disturbance rejection
684
Comparison of two magnetic saturation models of induction machines
685
Comparison of Two Major Classes of Coherent Pulsed Radar Systems
686
Comparison of two majority determination methods of detecting emergency wake-up trigger for ISDB-T Terrestrial digital television receivers
687
Comparison of two matching networks for a LTE2600 handset antenna
688
Comparison of two mathematical formulations for the offline routing of personal rapid transit system vehicles
689
Comparison of two mathematical models for predicting the fallout hazard from terrorist nuclear detonations
690
Comparison of two maximal ratio combining techniques in antenna arraying
691
Comparison of two maximum power point trackers for photovoltaic systems using robust controllers
692
Comparison of two measurement fusion methods for Kalman-filter-based multisensor data fusion
693
Comparison of two metaheuristics with mathematical programming methods for the solution of OPF
694
Comparison of two metaheuristics with mathematical programming methods for the solution of OPF
695
Comparison of two metamaterial methods in earthquake engineering
696
Comparison of two meteorological models using self-organizing maps
697
Comparison of two methods for addressing DC component in phase-locked loop (PLL) systems
698
Comparison of two methods for aerosol optical depth retrieval over North Africa from MSG/SEVIRI data
699
Comparison of two methods for analyzing similar-circular waveguide
700
Comparison of two methods for automatic range alignment in ISAR imaging
701
Comparison of Two Methods for Automatic Segmentation of Brain MRI Based on 2D Seed Growth and Two Stage FCM Algorithm
702
Comparison of two methods for calculating yearly costs and balances for high voltage equipment
703
Comparison of two methods for computing flat outputs
704
Comparison of two methods for detection of North Atlantic Right Whale upcalls
705
Comparison of two methods for evaluating the effects of maintenance on component and system reliability
706
Comparison of two methods for extracting surface soil moisture from C-band radar imagery
707
Comparison of Two Methods for Finding Biomedical Categories in Medline
708
Comparison of Two Methods for Full-Load In Situ Induction Motor Efficiency Estimation From Field Testing in the Presence of Over/Undervoltages and Unbalanced Supplies
709
Comparison of two methods for long-run marginal cost-based transmission use-of-system pricing
710
Comparison of Two Methods for Modeling Large-Signal Alternating Magnetic Fields Using Finite-Elements
711
Comparison Of Two Methods For Modeling Large-Signal Alternating Magnetic Fields Using Finite-Elements
712
Comparison of two methods for modeling thin regions in eddy current non-destructive testing
713
Comparison of two methods for realization of multiplierless elliptic IIR filters
714
Comparison of two methods for removing baseline wander in the ECG
715
Comparison of two methods for SPECT attenuation correction without transmission measurements
716
Comparison of Two Methods for Texture Image Classification
717
Comparison of two methods for the generation of spatially modulated ultrasound radiation force
718
Comparison of two methods for time delay estimation of sinusoids
719
Comparison of two methods for unsupervised person identification in TV shows
720
Comparison of Two Methods for Vehicle Extraction From Airborne LiDAR Data Toward Motion Analysis
721
Comparison of two methods of analysis on hand motor functional MRI: statistical method and independent component analysis
722
Comparison of two methods of forming differential equations of linear parametric circuits
723
Comparison of two methods of generating sensor locations in random array
724
Comparison of two methods of generation of ultra wideband signals
725
Comparison of Two Methods of Operating Theatre Planning: Application in Belgian Hospital
726
Comparison of two methods of the fusion of remote sensing images with fidelity of spectral information
727
Comparison of two microwave and two probe methods for measuring plasma density
728
Comparison of two microwave radiobrightness models and validation with field measurements
729
Comparison of two middleware data dissemination services in a wide-area distributed system
730
Comparison of two mixed methods approaches for multimodal quality evaluations: Open Profiling of Quality and Conventional Profiling
731
Comparison of Two Models for Temperature Observation of Miniature PEM Fuel Cells Under Dry Conditions
732
Comparison of two models for the imaging mechanism of underwater bottom topography by synthetic aperture radar
733
Comparison of two models in common use in calculations of a cable excited by HEMP
734
Comparison of two models of success prediction in software development projects
735
Comparison of Two Modern Pattern Recognition Methods
736
Comparison of two modulation choices for broadband wireless communications
737
Comparison of two modulation formats at spectral efficiency of 5 bits/dual-pol symbol
738
Comparison of two modulation strategies for a three level inverter synchronous reluctance motor (SynRM) drive
739
Comparison of two modulation techniques using frequency domain processing for in-house networks
740
Comparison of two modulation techniques using frequency domain processing in interference limited home networks
741
Comparison of two moving target detector´s performance
742
Comparison of two multilevel architectures for envelope amplifier
743
Comparison of two multisheet transmission windows for millimeter-wave radiometers
744
Comparison of two multi-step ahead forecasting mechanisms for wind speed based on machine learning models
745
Comparison of two near-field imaging algorithms for synthetic aperture radar
746
Comparison of two neural network methods applied to a tracking control system
747
Comparison of two neural network optimization approaches
748
Comparison of two neural networks approaches to Boolean matrix factorization
749
Comparison of two new methods for voltage harmonic compensation of a stand-alone single phase inverted-based fuel cell
750
Comparison of two new microwave plasma sources for HF chemical lasers
751
Comparison of two nonlinear adaptive control strategies
752
Comparison of two nonlinear constrained algorithms for 3D image restoration
753
Comparison Of Two Non-linear Constrained Algorithms For 3D Image Restoration
754
Comparison of two nonlinear control strategies for a hybrid source system using an isolated three-port bidirectional DC-DC converter
755
Comparison of two nonlinear controllers for current-fed induction motors
756
Comparison of two nonlinear model predictive control methods and implementation on a laboratory three tank system
757
Comparison of two nonlinear model predictive control strategies with observer-based disturbance compensation for a hydrostatic transmission
758
Comparison of two nonlinear speed observers for induction motors
759
Comparison of two nonuniformly-spaced decision feedback equalizers for sparse multipath channels
760
Comparison of Two Novel List Sphere Detector Algorithms for MIMO-OFDM Systems
761
Comparison of two objective speech quality measures: MBSD and ITU-T Recommendation P.861
762
Comparison of two open-loop adaptive speech enhancement algorithms for digital hearing aids
763
Comparison of two optical flow estimation methods using Matlab
764
Comparison of two optical switching architectures to provide a broadband connection to train passengers
765
Comparison of Two Optimal Control Strategies for a Grid Independent Photovoltaic System
766
Comparison of Two Optimal Rotary Transformer Designs for Highly Constrained Applications
767
Comparison of two optimization criteria for power transmission lines
768
Comparison of Two Optimization Techniques as Applied to Three-Phase Induction Motor Design
769
Comparison of two optimization techniques as applied to three-phase induction motor design
770
Comparison of two optimization techniques for channel assignment in cellular radio network
771
Comparison of two optimization techniques for the estimation of complex permittivities of multilayered structures using waveguide measurements
772
Comparison of two optimum rates for noiseless encoding of a nonstationary information source
773
Comparison of Two Output Models for the BMAP/MAP/1 Departure Process
774
Comparison of two overlapping averaging schemes for HF ocean radar
775
Comparison of Two Overmodulation Strategies in an Indirect Matrix Converter
776
Comparison of two packet-retransmission techniques (Corresp.)
777
Comparison of two partial discharge classification methods
778
Comparison of two particle charging experiments for testing the JSC Mars-1 Martian regolith simulant against man-made materials
779
Comparison of two Passivity-Based Control strategies for a wind power generator
780
Comparison of two permanent magnet synchronous drive position controllers
781
Comparison of two phase models in indoor radio propagation channels
782
Comparison of two planar elliptical ultra-wideband PPy conductive polymer antennas
783
Comparison of Two Pole-Zero Cancellation Circuits for Fast Charge Sensitive Amplifier in CMOS Technology
784
Comparison of two position and speed estimation techniques used in PMSM sensorless vector control
785
Comparison of two post-calibration correction methods for complex permittivity measurement of biological tissues up to 50 GHz
786
Comparison of two power electronic schemes for 3 kW Li-Ion battery charger
787
Comparison of two power flow control strategies for photovoltaic inverters
788
Comparison of two procedures of loading with voltage-sensitive dye di-4 ANEPPS in rabbit isolated heart
789
Comparison of two processes applied on signals representing microvascular blood cell phenomena to diagnose patients with peripheral arterial occlusive disease
790
Comparison of two projectors with image-based resolution models in a fully 3D list-mode PET reconstruction
791
Comparison of two proposed methods in adaptive noise canceling
792
Comparison of two prototype-based multicriteria classification methods
793
Comparison of two proximal splitting algorithms for solving multilabel disparity estimation problems
794
Comparison of two PWM techniques for a single-phase shunt active power filter applying indirect current control
795
Comparison of two quadrotor dynamic models
796
Comparison of two quality control models for short run process based on Bayesian analysis
797
Comparison of two radar-based scanning-techniques for the use in robotic mapping
798
Comparison of two recent semiconductor laser models
799
Comparison of two recycle dilated banyan network with output buffers
800
Comparison of two redox couples for AFM-SECM
801
Comparison of two reduced complexity maximum-likelihood sequence detectors for continuous phase modulation scheme
802
Comparison of two regression models for predicting crop yield
803
Comparison of Two Remote Sensing Based Models for Regional Net Primary Productivity Estimation—A Case Study in Semi-Arid Central Kazakhstan
804
Comparison of two remote sensing time series analysis methods for monitoring forest decline
805
Comparison of two repetitive control strategies of UPS inverter on saber
806
Comparison of two representative land surface temperature and emissivity separation methods for hyperspectral infrared spectroradiometer data
807
Comparison of two resource sharing schemes in an overlay heterogeneous network
808
Comparison of two retransmission request mechanisms for trellis coded modulation
809
Comparison of two retrieval soil moisture algorithms on SMOS data
810
Comparison of two robust predictive control strategies for trajectory tracking of flexible-joint robots
811
Comparison of two rotor temperature estimation models of a surface cooled squirrel cage induction machine
812
Comparison of two sagittal pelvic tilt measurement protocols using newly calibrated novel pelvic sensor
813
Comparison of two sampling techniques of SVM applied in sensorless Field Oriented Controlled IM drive
814
Comparison of Two Scanning Radar Detectors: The Moving Window and the Feedback Integrator
815
Comparison of two schemes for automatic keyword extraction from MEDLINE for functional gene clustering
816
Comparison of two schemes for continuous-time sub-volt op-amp operation
817
Comparison of two schemes for the generation of ELF/VLF waves in the HF heater-modulated polar electrojet
818
Comparison of two schools of polymeric ageing models: Causes and effects of space charge
819
Comparison of two seal technologies for hydraulic microactuators
820
Comparison of Two Searchback Schemes for Non-Coherent TOA Estimation in IR-UWB Systems
821
Comparison of two security protocols for preventing packet dropping and message tampering attacks on AODV-based mobile ad Hoc networks
822
Comparison of two sensorless Permanent Magnet Synchronous Motor drives fed by a matrix converter and a voltage source inverter using fundamental PWM excitation signals
823
Comparison of two series-parallel Hybrid Electric Vehicles focusing on control structures and operation modes
824
Comparison of two sets of low-order basis functions for tetrahedral VIE modeling
825
Comparison of two significant development methods applied to the design of real-time robot controllers
826
Comparison of two simple high-frequency earthing electrodes
827
Comparison of Two Simulation Software for Modeling a Construction Process
828
Comparison of Two Single-Ion Optical Frequency Standards at the 1·10
-15
Level
829
Comparison of two single-ion optical frequency standards at the Hertz level
830
Comparison of two small animal PET scanners: Pinhole collimation vs. electronic collimation
831
Comparison of two SNR-based feedback schemes in multiuser dual-hop amplify-and-forward relaying networks
832
Comparison of two soft switching DC-DC converters for fuel cell applications
833
Comparison of two software packages for data analysis at gait laboratories
834
Comparison of two solid-state photomultiplier-based scintillation gamma-ray detector configurations
835
Comparison of two spectral-texture classification algorithms
836
Comparison of two speech communication codecs for transmitting voice/speech over Zigbee
837
Comparison of two SRAM matrix leakage reduction techniques in 45nm technology
838
Comparison of two standard WLR current-ramped tests for oxide reliability
839
Comparison of two state observer design algorithms
840
Comparison of Two State Observer Design Approaches
841
Comparison of two statistical tests for keystream sequences
842
Comparison of Two Stirrer Designs for a New Reverberation Chamber
843
Comparison of two storage models in data-driven multithreaded architectures
844
Comparison of two Strategies for Serial Acquisition of CDMA
845
Comparison of two strategies of background-accommodation: Influence on the metabolite concentration estimation from in vivo Magnetic Resonance Spectroscopy data
846
Comparison of two strategies of path planning for underwater robot navigation under uncertainty
847
Comparison of two Strontium optical lattice clocks in agreement at the 10
−16
level
848
Comparison of two Strontium optical lattice clocks in agreement at the 10
−16
level
849
Comparison of Two Suboptimal SISO Iterative Demodulators: LMMSE Estimation and Vector Gaussian Approximation
850
Comparison of two swap heuristics with a genetic algorithm for the design of an ATM network
851
Comparison of two switched reluctance motors with bipolar excitation
852
Comparison of Two Switched Reluctance Motors with No Flux-Reversal in the Stator
853
Comparison of two systematic harmonic computation techniques for switching power electronic devices
854
Comparison of two systems of multiple line sources for SPECT transmission scanning
855
Comparison of Two Target Classification Techniques
856
Comparison of two techniques for attenuation of narrow-band interference in spread-spectrum communication systems
857
Comparison of two techniques for closed-loop drive of VR step motors without direct rotor position sensing
858
Comparison of two techniques for measuring amplitude and phase noises of gigahertz pulse train from actively mode-locked Er-doped fiber laser
859
Comparison of two techniques for the solution of the 3-D nonlinear transient eddy current problem
860
Comparison of two techniques for two-dimensional finite-element inductance computation of electrical machines
861
Comparison of two techniques of endovascular coil modeling in cerebral aneurysms using CFD
862
Comparison of Two Temporary Carriers for Test and Burn-In of Memory Die
863
Comparison of two terrestrial atmospheric turbulence suppression algorithms (March 2007)
864
Comparison of two theories for buried insulated wire
865
Comparison of two theories of angle glint: polarization considerations
866
Comparison of two thermal circuit models for HST calculation of oil-immersed transformers
867
Comparison of two thermometer-to-binary decoders for high-performance flash ADCs
868
Comparison of Two Three-Phase PLL Systems for More Electric Aircraft Converters
869
Comparison of Two Time Reversal Schemes using Circular UWB Measurements
870
Comparison of two tonality estimation methods used in a psychoacoustic model
871
Comparison of two transmission strategies for use in survivable radio networks
872
Comparison of two tree-structured approaches for grapheme-to-phoneme conversion
873
Comparison of Two Two-Photon Dressed Rules in Multi-Wave Mixing
874
Comparison of two types of electric field integral equation for 3-dimensional waveguide
875
Comparison of two types of hybrid motor/generator
876
Comparison of two types of lateral DMOSFET optimized for RF power applications
877
Comparison of two types of nonlinear controllers for magnetic bearing system stabilization: An experimental approach
878
Comparison of two types of OSEK network management for CAN
879
Comparison of two types of PM linear synchronous servo and miniature motor with air-cored film coil
880
Comparison of two types of PM linear synchronous servo and miniature motor with air-cored film coil
881
Comparison of two types of tactile sensing layer in touch screen panel for force sensitive detection
882
Comparison of two types of the tolerance band controlled converters
883
Comparison of Two Ultra-Fast Actuator Concepts
884
Comparison of Two Unsupervised Methods of Classification for Segmenting Multi-Spectral Images
885
Comparison of two use-of-system methods for allocating transmission supplementary cost
886
Comparison of Two UV Imaging Parameters´s in the Insulator Fault Diagnosis
887
Comparison of two vacuum circuit breaker arc models for small inductive current switching
888
Comparison of two variants of a novel setup for real time high resolution UV-LED absorption spectroscopy
889
Comparison of two vegetation classification techniques in China based on NOAA/AVHRR data and climate-vegetation indices of the Holdridge life zone
890
Comparison of Two Vibration Control Methods for Flexible Manipulator with PZT Actuators
891
Comparison of two voltage control strategies for a wind power plant
892
Comparison of two voltage-sharing measures for triple-break vacuum interrupters in series
893
Comparison of two volume integral equation formulations for solving electromagnetic scattering by inhomogeneous dielectric objects
894
Comparison of two wafer inspection methods for particle monitoring on semiconductor manufacturing
895
Comparison of two wake models for use in gradient-based wind farm layout optimization
896
Comparison of two water vapor retrieval algorithms for HJ1A hyperspectral imagery
897
Comparison of two watermarking methods based on DWT
898
Comparison of two wavelet based image watermarking schemes
899
Comparison of two W-band low-noise amplifier MMICs with ultra low power consumption based on 50nm InGaAs mHEMT technology
900
Comparison of two wireless ad hoc routing protocols on a hardware test-bed
901
Comparison of two, energy optimizing techniques for PM-machines
902
Comparison of two-beam coupling response for three dopant densities of BaTiO/sub 3/:Rh
903
Comparison of two-dimensional periodic and finite absorber structures
904
Comparison of Two-Dimensional String Matching Algorithms
905
Comparison of two-phase induction motor modeling in ANSYS Maxwell 2D and 3D program
906
Comparison of two-phase latch configurations for pipelined processors in MOS VLSI: case study: a CMOS systolic multiplier
907
Comparison of two-sensor tracking methods based on state vector fusion and measurement fusion
908
Comparison of two-stage L-band EDFAs with gain-clamped characteristics based on three configurations
909
Comparison of two-step and one-step motion compensation algorithms for airborne synthetic aperture radar
910
Comparison of two-type corona plasma energization techniques: ultra-short and DC/AC power sources
911
Comparison of TwoVirtual education labs: Closing the gap between online and brick-and-mortar schools
912
Comparison of two-wave and three-wave forward mixing in bismuth silicon oxide-theory and experiment
913
Comparison of Two-Way and GPS Carrier-Phase Time Transfer Between CRL and TL
914
Comparison of Two-Way Satellite Time and Frequency Transfer and GPS Common-View time transfer during the INTELSTAT field trial
915
Comparison of two-way satellite time transfers and GPS common view time transfers
916
Comparison of Two-Way Two-Dimensional Finite Automata and Three-Way Two-Dimensional Finite Automata
917
Comparison of Type 2 and Type 4 services for MIL-STD-188-220B
918
Comparison of Type I and Type II Heterojunction Unitravelling Carrier Photodiodes for Terahertz Generation
919
Comparison of type-I and type-II accelerated life tests for selecting the most reliable product
920
Comparison of typical scintillators for PET
921
Comparison of U
CE
- and R
Gi
-based junction temperature measurement of multichip IGBT power modules
922
Comparison of UAV control systems designed by means of Kalman filter and Luenberger observer
923
Comparison of UAV-based reconnaissance systems performance using realistic mobility models
924
Comparison of UDDI registry replication strategies
925
Comparison of UDP Transmission Performance Between IP-Over-InfiniBand and 10-Gigabit Ethernet
926
Comparison of UHF antenna and VHF capacitor PD detection measurements from turbine generator stator windings
927
Comparison of ultra capacitors, hydraulic accumulators and batteries technologies to optimize hybrid vehicle ecoefficiency
928
Comparison of ultracapacitor electric circuit models
929
Comparison of Ultra-Compact Seed Sources for MFCG´s
930
Comparison of ultralow specific on-resistance UMOSFET structures
931
Comparison of Ultralow Specific On-Resistance UMOSFET Structures
932
Comparison of ultralow specific on-resistance UMOSFET structures: the ACCUFET, EXTFET, INVFET, and conventional UMOSFET´s
933
Comparison of ultra-low-power and static CMOS full adders in 0.15 µm FD SOI CMOS
934
Comparison of ultralow-sidelobe-antenna far-field patterns using the planar-near-field method and the far-field method
935
Comparison of Ultranarrow Fluorescence and Four-Wave Mixing in Electromagnetically Induced Transparency Windows
936
Comparison of ultra-shallow junctions with PLAD and beamline implantation
937
Comparison of ultrasonic array imaging algorithms for nondestructive evaluation
938
Comparison of ultrasonic measurements of nulliparous versus multiparous cervices
939
Comparison of ultrasonic signals in aircraft skin obtained through experiment and simulation
940
Comparison of ultrasonic, electrical and UHF characteristics of partial discharge emission in oil/paper insulation systems
941
Comparison of ultrasound and γ-radiation influence on transport properties of MnHdTe and CdMnHgTe-crystals
942
Comparison of ultrasound radiation force and fluid pressure generated waves in arterial vessels
943
Comparison of ultrasound scattering behavior of Optison
®
and a liquid perfluorocarbon nanoparticle contrast agent
944
Comparison of ultrasound scattering properties of Optison(R) with a liquid perfluorocarbon nanoparticle contrast agent
945
Comparison of ultrasound strain images with multi-modality imaging techniques in liver RF ablation assessment: Initial ex vivo and clinical results
946
Comparison of ultra-thin gate oxide degradation in P and N-MOSFETs
947
Comparison of ultra-thin gate oxide ESD protection capability of silicided and silicide-blocked MOSFETS
948
Comparison of ultra-wideband THz generation and detection systems
949
Comparison of uncertainty approaches to system failure probability
950
Comparison of uncertainty representations for missing data in information retrieval
951
Comparison of unconventional inter-filtering methods to penalised-likelihood for space-invariant tomographs
952
Comparison of underlay and overlay spectrum sharing strategies in MISO cognitive channels
953
Comparison of undoped and doped high resistivity CdTe and (Cd,Zn)Te detector crystals
954
Comparison of undoped and doped high resistivity CdTe and (Cd,Zn)Te detector Crystals
955
Comparison of unequal erasure protection schemes for video streaming
956
Comparison of uniaxial magnetic anisotropy of metallic thin films grown on vicinal (111) and (100) Si surfaces
957
Comparison of uniaxial magnetic anisotropy of metallic thin films grown on vicinal [111] and [100] Si surfaces
958
Comparison of Uniaxial Wafer Bending and Contact-Etch-Stop-Liner Stress Induced Performance Enhancement on Double-Gate FinFETs
959
Comparison of Unicast and Receiver-Based Routing Services in Wireless Sensor Networks
960
Comparison of unified power flow controller models for power flow studies
961
Comparison of uniform and non-uniform M-QAM schemes for mobile video applications
962
Comparison of uniform asymptotic expansions of diffraction integrals
963
Comparison of uniform asymptotic theory and Ufimtsev´s theory of electromagnetic edge diffraction
964
Comparison of Uniform Theory of Diffraction Coefficients for Delay Spread and Angle Spread Estimation Using Game Engines in MIMO
965
Comparison of unintentional frequency and phase modulation features for specific emitter identification
966
Comparison of unipolar codes for DS-OCDMA system
967
Comparison of unitary evolution operator decompositions in quantum systems
968
Comparison of Unit-Level Automated Test Generation Tools
969
Comparison of univariate and multivariate predicted method based on support vector regression for silicon content in hot metal
970
Comparison of universal field oriented (UFO) controllers in different reference frames
971
Comparison of universal logic gates with NAND and NOR gates in the realisation of functions of three variables
972
Comparison of university level study methods and laboratory equipment for teaching of electrical drives
973
Comparison of Unsafe Behaviors and Accidents Attribution
974
Comparison of Unscented Kalman Filters
975
Comparison of unsupervised and supervised gene selection methods
976
Comparison of unsupervised feature selection methods for high-dimensional regression problems in prediction of peptide binding affinity
977
Comparison of unsupervised segmentation methods for surficial materials mapping in Nunavut, Canada using RADARSAT-2 polarimetric, Landsat-7, and DEM data
978
Comparison of Unsymmetrical Two-winding Induction Motor Performances Under Variable Speed Control Techniques
979
Comparison of UPC mechanisms in a DQDB/B-ISDN gateway
980
Comparison of upgrade techniques for mobile communication systems
981
Comparison of uplink SAR values in train environment for different wireless technologies
982
Comparison of upper airway respiratory resistance measurements with the esophageal pressure/airflow relationship during sleep
983
Comparison of upper limb joint forces during straight line and turning wheelchair maneuvers
984
Comparison of UPS topologies based on high frequency transformers for powering the emerging hybrid fiber-coaxial networks
985
Comparison of urban areas extracted by using L-band and X-band fully polarimetric SAR images
986
Comparison of urban propagation models with CW-measurements
987
Comparison of urban traffic prediction methods between UTN-based spatial model and time series models
988
Comparison of US, EPO, and PCT Patent Citations for Citation Analysis
989
Comparison of Usability of Oxide Apertures and Photonic Crystals Used to Create Radial Optical Confinements in 650-nm GaInP VCSELs
990
Comparison of usable power density in board mounted DC-DC converters
991
Comparison of User Mobility Pattern Prediction Algorithms to increase Handover Trigger Accuracy
992
Comparison of user performance and satisfaction of tablet virtual keyboards in three different OS environment
993
Comparison of User Trajectories Based on Coordinate Data and State Transitions
994
Comparison of using carrier-based pulse width modulation techniques for cascaded H-bridge inverters application in the PV energy systems
995
Comparison of Using Different Types of Wavelet or FFT for De-nosing of Body Surface Potential Signals
996
Comparison of Using Mono-Polar and Bipolar Electroencephalogram (EEG) Electrodes for Detection of Right and Left Hand Movements in a Self-Paced Brain Computer Interface (BCI)
997
Comparison of Using SVC and STATCOM for Wind Farm Integration
998
Comparison of US-SOX and J-SOX on the Requirements of Assessment and Auditing Concerning Internal Control Over Financial Reporting
999
Comparison of UTD and UAT in axially symmetric reflectors
1000
Comparison of utility functions for routing in cognitive wireless ad-hoc networks
