<< مقالات لاتين فني مهندسي >>
<< بر اساس عنوان >>
1
Analysis of the Effect of Image Resolution on Automatic Face Gender Classification
2
Analysis of the effect of impulse noise on multicarrier and single carrier QAM systems
3
Analysis of the effect of inter-bar currents on the performance of polyphase cage-induction motors
4
Analysis of the effect of inter-bar currents on the performance of polyphase cage-induction motors
5
Analysis of the Effect of Interference on InSAR
6
Analysis of the effect of Java software faults on security vulnerabilities and their detection by commercial web vulnerability scanner tool
7
Analysis of the effect of lightning on the energized shield wire line technology
8
Analysis of the effect of linguistic variables of consequence membership function
9
Analysis of the effect of LUT size on FPGA area and delay using theoretical derivations
10
Analysis of the effect of metal oxide arresters on system resonance using the describing function method
11
Analysis of the Effect of Modern Service Industry Clustering on Regional Economic Integration
12
Analysis of the effect of modulation delays on the size of the output capacitor
13
Analysis of the effect of nickel electroplating layer addition on receiver coil of wireless power transfer system
14
Analysis of the effect of nonlinear input/output characteristics of digital integrated circuits on signal integrity
15
Analysis of the effect of nonlinear low noise amplifier with memory for wideband spectrum sensing
16
Analysis of the Effect of Optically Induced Local Non-Uniformities in Laser Surface Treatment Applications
17
Analysis of the Effect of Pavement Surface Rainwater on Groundwater Quality
18
Analysis of the effect of radial rotor surface grooves on rotor losses of high speed solid rotor induction motor
19
Analysis of the effect of radio frequency interference on interferometric phase
20
Analysis of the effect of radio frequency interference on the DC performance of bipolar operational amplifiers
21
Analysis of the effect of radio frequency interference on the DC performance of CMOS operational amplifiers
22
Analysis of the effect of rainfall intensity in Jakarta and Tangerang to the performance of free space optics communication system
23
Analysis of the effect of regulators on power system damping using a sensitivity technique
24
Analysis of the effect of reliability on LCC of warship
25
Analysis of the effect of sampled-data control on continuous finite-time control systems
26
Analysis of the effect of scattering in radio transmission
27
Analysis of the effect of scattering in radio transmission
28
Analysis of the effect of shot and thermal noises on the performance of static OC
2
DMA correlation receivers using Fiber Bragg Grating
29
Analysis of the effect of shot noise on the performance of dynamic OC
2
DMA correlation receivers using fiber Bragg grating
30
Analysis of the effect of shot noise on the performance of static OC
2
DMA correlation receivers using Fiber Bragg Grating
31
Analysis of the effect of shunt traces on the radiation from printed circuit boards
32
Analysis of the effect of size of omega network on its fault tolerance behaviour in presence of multiple faults
33
Analysis of the effect of slot resolution on the simulating precision of thin-slot coupling with parallel implementation
34
Analysis of the effect of solar cells on the antenna integrated on top of their cover glass
35
Analysis of the Effect of Source Voltage Fluctuations on the Power Factor in Three-Phase Controlled Rectifiers
36
Analysis of the effect of spontaneous-emission coupling on the number of excited longitudinal modes in semiconductor lasers
37
Analysis of the effect of stray capacitance on an ac-based capacitance tomography transducer
38
Analysis of the effect of the density of states on the characteristics of thin-film transistors
39
Analysis of the Effect of the Financial Support on China´s Equipment Manufacturing
40
Analysis of the Effect of the Initial Emission Permits Allocation on Market Power
41
Analysis of the effect of the light rail on the airport passengers transfer
42
Analysis of the effect of the parameter variation on the flux weakening controller for improving torque capability
43
Analysis of the effect of the ramie fiber properties on the yarn quality by neural network
44
Analysis of the effect of thermal chirp on interferometric homodyne and heterodyne crosstalk in optical communication systems employing directly Modulated DFB lasers
45
Analysis of the effect of timing synchronization errors on pilot-aided OFDM systems
46
Analysis of the Effect of Training and Test Data on the Performance of Speech Recognition Systems
47
Analysis of the effect of transmitting beam on the BER performance of FSO communication system
48
Analysis of the effect of tunnel construction on frame structure buildings in Xiamen Airport Road
49
Analysis of the effect of upconversion on signal amplification in erbium-doped fiber amplifiers (EDFAs)
50
Analysis of the effect of using non-composite multi-channel raw color images on face recognition accuracy with arbitrary large off-the-plane rotations
51
Analysis of the Effect of Vignetting on MIMO Optical Wireless Systems Using Spatial OFDM
52
Analysis of the effect of weather determinants on lodging demands using big data processing
53
Analysis of the effect of wind turbines in SAR images
54
Analysis of the effect on the large floating roof oil tanks struck by indirect lightning based on FDTD
55
Analysis of the effective permittivity and permeabilityof embedded lossy dielectric array
56
Analysis of the Effective Refractive Index of Silicon Waveguides Through the Constructive and Destructive Interference in a Mach–Zehnder Interferometer
57
Analysis of the effective-index method for the vector modes of rectangular-core dielectric waveguides
58
Analysis of the effectiveness of core swapping in modern multicore processors
59
Analysis of the effectiveness of ferrite core for improving EFT immunity
60
Analysis of the effectiveness of global virtual teams in software engineering projects
61
Analysis of the effectiveness of non-unit protection methods within DC microgrids
62
Analysis of the Effects Caused by Structural Asymmetries in the Performance of Three-Limb Core Three-Phase Inductive Filters
63
Analysis of the effects from lateral variations of irregular terrain based on a three-dimensional parabolic equation
64
Analysis of the effects of a high power electronics controller on electrical Grids during faulted and post-faulted conditions using wavelets
65
Analysis of the effects of a non-circular two layer stress-free state on arterial wall stresses
66
Analysis of the effects of a passing cloud on a grid-interactive photovoltaic system with battery storage using neural networks
67
Analysis of the effects of a resistively coated upper dielectric layer on the propagation characteristics of hybrid modes in a waveguide-shielded microstrip using the method of lines
68
Analysis of the effects of altitude on arc column behavior by CFD modelling
69
Analysis of the effects of bearings-only sensors on the performance of the neural extended kalman filter tracking system
70
Analysis of the effects of blade pitch on the radar return signal from rotating aircraft blades
71
Analysis of the effects of carrier frequency offset on filterbank-based MC-CDMA
72
Analysis of the effects of carrying a backpack on the angles of the hip and knee during gait
73
Analysis of the effects of clock imperfections in N-path filters
74
Analysis of the effects of coupling through substrate and the calculus of the Q factor
75
Analysis of the effects of cover crop residue on hyperspectral reflectance discrimination of soybean and weeds via Haar transform
76
Analysis of the effects of CQI Feedback for LTE Networks on ns-3
77
Analysis of the effects of CQI feedback for LTE networks on ns-3
78
Analysis of the effects of cross-field defocus on the photolithographic process window
79
Analysis of the effects of delays on load sharing
80
Analysis of the effects of distance between head and mobile phone on SAR
81
Analysis of the effects of distributed generation sources on power grid reliability
82
Analysis of the effects of duty cycle constraints in multiple-input converters for photovoltaic applications
83
Analysis of the effects of end connection quality on the dielectric loss of metallized film capacitors
84
Analysis of the effects of environment on the performance of free space earth-to-satellite optical link in Malaysia
85
Analysis of the effects of errors in attenuation maps on PET quantitation in TOF PET
86
Analysis of the effects of external injection and diffusion of excited states on relaxation oscillations in lasers
87
Analysis of the effects of failure and noise in the distributed connectivity maintenance of a multi-robot system
88
Analysis of the Effects of Faraday Rotation on Spaceborne Polarimetric SAR Observations at
-Band
89
Analysis of the effects of firing rate and synchronization on spike-triggered averaging of neuronal output
90
Analysis of the effects of flexibilities on scheduling a flexible manufacturing system using discrete-event simulation
91
Analysis of the Effects of Flicker on the Blood-Flow Variation in the Human Eye
92
Analysis of the Effects of Fringing Electric Field on FinFET Device Performance and Structural Optimization Using 3-D Simulation
93
Analysis of the effects of gear trasmission structure on the electric vehicle performaces
94
Analysis of the Effects of Ground Resistivity on the Lightning Radiation Fields Based on FDTD Method
95
Analysis of the effects of handoff on the performance of tactical communication systems using WLANs
96
Analysis of the effects of high power pulse on active microwave circuits
97
Analysis of the effects of high-energy electrons on a low earth orbit satellite parts
98
Analysis of the effects of image transformation, template selection, and partial information on face recognition with time-varying expressions for homeland security applications
99
Analysis of the effects of induced fields from sliding electrical contacts
100
Analysis of the effects of induced fields from sliding electrical contacts
101
Analysis of the Effects of Irregular Terrain on Radio Wave Propagation Based on a Three-Dimensional Parabolic Equation
102
Analysis of the effects of lattice irregularity in photonic crystal fibers
103
Analysis of the effects of lead configuration on cardiac spectrum
104
Analysis of the effects of linearity and efficiency of amplifiers in QAM systems
105
Analysis of the effects of load cycling and thermal transients on polymer-insulated HVAC cable life
106
Analysis of the effects of load model on a single phase fault locator based on support vector machines
107
Analysis of the effects of mechanically induced tremor on EEG-EMG coherence using wavelet and partial directed coherence
108
Analysis of the effects of metal discontinuities in nonradiative dielectric waveguide
109
Analysis of the effects of mobility on the grid location service in ad hoc networks
110
Analysis of the effects of mounting stresses on the resonant frequency of crystal resonators
111
Analysis of the effects of multirate filters on stationary random inputs, with application in adaptive filtering
112
Analysis of the effects of nonidealities of power components and mains voltage unbalance on the operating behavior of a three-phase/switch buck-type unity power factor PWM rectifier
113
Analysis of the effects of outages on the quality of service of GPRS network systems
114
Analysis of the Effects of Pansharpening in Change Detection on VHR Images
115
Analysis of the effects of parasitic capacitance and inductance on inverse class E power amplifier
116
Analysis of the effects of phase noise in filtered multitone (FMT) modulated systems
117
Analysis of the effects of phase-noise in orthogonal frequency division multiplex (OFDM) systems
118
Analysis of the effects of pulse shape and width on the retiming properties of a 3R regenerator
119
Analysis of the effects of quantization in high-order function neural network
120
Analysis of the effects of quantization in multilayer neural networks using a statistical model
121
Analysis of the effects of quantization in multi-layer neural networks using a statistical model
122
Analysis of the effects of rain on surface wind retrieval from X-band marine radar images
123
Analysis of the effects of real and injected software faults: Linux as a case study
124
Analysis of the effects of salt content on soil spectral characteristics
125
Analysis of the effects of scaling on interconnect delay in ULSI circuits
126
Analysis of the effects of septum thickness on impedance and fields of TEM mode inside an asymmetric TEM cell
127
Analysis of the effects of series filtering in coupled-strip sections
128
Analysis of the effects of shunt capacitance on the performance of pulse modulators
129
Analysis of the effects of single event transients on an SAR-ADC based on charge redistribution
130
Analysis of the effects of software reuse on customer satisfaction in an RPG environment
131
Analysis of the Effects of Solution Conductivity on Electrospinning Process and Fiber Morphology
132
Analysis of the Effects of Solution Conductivity on Electro-Spinning Process and Fiber Morphology
133
Analysis of the Effects of Space Charge on Grid Impedance
134
Analysis of the effects of SS7 message discard schemes on call completion rates during overload
135
Analysis of the effects of substrate parameters on the performance of RF MEMS tunable microstrip bandpass filters
136
Analysis of the effects of supply noise coupling on phase noise in integrated LC CMOS oscillators
137
Analysis of the effects of surface interaction on Silicon Nanowires´ conduction
138
Analysis of the effects of the hidden node problem in IEEE 802.15.7 uplink performance
139
Analysis Of The Effects Of The Load On The Gain, Linearity And Noise Figure Of A Gilbert Cell Double Balanced Mixer
140
Analysis of the Effects of the Nuclear Heat Load on the ITER TF Magnets Temperature Margin
141
Analysis of the effects of time delay in clock recovery circuits based on phase-locked loops
142
Analysis of the effects of time delay spread on TCM performance
143
Analysis of the Effects of Tin Whiskers at High Frequencies
144
Analysis of the Effects of Truncation on the EWMA Observer
145
Analysis of the effects of water on the ACTS propagation terminal antenna
146
Analysis of the efficacy of a novel mobile medical wastewater treatment system
147
Analysis of the efficacy of a WiFi architecture for the management of Medium Voltage distribution systems
148
Analysis of the efficacy of an automated TheraCys BCG preparation
149
Analysis of the Efficiency and Delay of Bandwidth Request Algorithms in DVB-RCS
150
Analysis of the efficiency and inductance of multiturn thin film magnetic recording head
151
Analysis of the efficiency characteristics of an LLC resonant converter having a current doubler rectification circuit
152
Analysis of the Efficiency Improvement in Small Wind Turbines when Speed Is Controlled
153
Analysis of the Efficiency of Data Transmission Format Based on Ajax Applications
154
Analysis of the Efficiency of Different Remote User and Server Authentication Schemes
155
Analysis of the efficiency of methods for inputting the external information into radiation thermometers
156
Analysis of the efficiency of radiation absorbing material at X-band by measurement of RCS of planes and cylinder in open field
157
Analysis of the efficiency of regional electricity input-output for China based on grey DEA model
158
Analysis of the efficiency of SNR-scalable strategies for motion compensated video coders
159
Analysis of the efficiency of spinning-current techniques thru compact modeling
160
Analysis of the E-field Distribution for E-field Probes Calibration in Tissue-Simulating Liquid
161
Analysis of the E-Government Operation Services of China in the Present Situation
162
Analysis of the EHD enhancement of heat transfer in a flat duct
163
Analysis of the E-J Curve of HTS Tapes Under DC and AC Magnetic Fields at 77 K
164
Analysis of The Ejector Critical Back Pressure to A Ejector Refrigeration System
165
Analysis of the elastic field structure of the photorefractive grating near the boundary of lithium niobate crystal
166
Analysis of the electric field and force in an arrangement of a conducting sphere and a plane electrode with a dielectric barrier
167
Analysis of the Electric Field and Ion Current Density under Ultra High-voltage Direct-current Transmission Lines Based on Finite Element Method
168
Analysis of the Electric Field and Ion Current Density Under Ultra High-Voltage Direct-Current Transmission Lines Based on Finite Element Method
169
Analysis of the electric field distribution on insulating supports of dry-type transformers under high temperature
170
Analysis of the electric field distribution on perfectly conducting wing sections by application of a conformal mapping
171
Analysis of the electric field of a 500 kV transmission line
172
Analysis of the electric field strength location variability in the UHF band for mobile and portable multimedia broadband services in SFN networks
173
Analysis of the Electric Potential of an Acoustic Surface Wave Propagating on a Layered Half Space
174
Analysis of the electric railway loading impact on the operation of the generator negative current protection
175
Analysis of the electric vehicle charging station´s layout in Beijing based on improved traveling simulation model
176
Analysis of the electrical and thermal properties of power DMOS devices during UIS supported by 2 - D process and device simulation
177
Analysis of the electrical breakdown in hydrogenated amorphous silicon thin-film transistors
178
Analysis of the electrical characteristics of LDMOSFET under various temperature
179
Analysis of the electrical characteristics of novel ESD protection device with high holding voltage under various temperatures
180
Analysis of the electrical characteristics of novel ESD protection device with high holding voltage under various temperatures
181
Analysis of the electrical energy consumption and energy audit of interior lighting for an industrial site in Morocco
182
Analysis of the electrical excitation of CNS neurons
183
Analysis of the electrical field effects of AC and DC ionization systems for MR head manufacturing
184
Analysis of the electrical frequency in Caracas during four major events of the year 2008
185
Analysis of the electrical impedance tomography algorithm based on finite element method and Tikhonov regularization
186
Analysis of the electrical noise from the APS kicker magnet power supplies
187
Analysis of the electrical patterns and structural remodeling in atrial fibrillation
188
Analysis of the electrical performance of multi-coupled high-speed interconnects for SoP
189
Analysis of the electricity demand patterns of a building in a university Campus
190
Analysis of the electrocardiogram signal by the lifting scheme
191
Analysis of the electro-hydraulic servo shaking table with flexible payload
192
Analysis of the electromagnetic behavior of a finite slot aperture through an hybrid 2D Wiener-Hopf technique
193
Analysis of the electromagnetic behavior of a thin finite slot aperture through Wiener-Hopf technique
194
Analysis of the electromagnetic behavior of an infinite slot aperture through Wiener-Hopf technique
195
Analysis of the Electromagnetic Characteristics of Coplanar Waveguide by FDTD Method
196
Analysis of the Electromagnetic Characteristics of Nanowires Using ScaLAPACK on High Performance Computers
197
Analysis of the electromagnetic degrees of freedom in multi-antennas communications systems
198
Analysis of the electromagnetic environment under the lead-in after extending a new main transformer in high voltage substation
199
Analysis Of The Electromagnetic Excitation Of The Discharge In An ECR Multipolar Plasma Source
200
Analysis Of The Electromagnetic Field Distribution In A Microwave Circuit Using The TLM Method And Comparison With Normal Mode Expansion Method And Experiments
201
Analysis of the electromagnetic field distribution inside inhomogeneous lossy dielectric objects by the method of conjugate gradients
202
Analysis of the electromagnetic field scattered by a spherical breast tumour model
203
Analysis of the electromagnetic field structure illuminating the aperture of phased-array antennas from far field distance
204
Analysis of the electromagnetic field transient inside a shielded structure
205
Analysis of the electromagnetic fields inside building structure using the subgrid FDTD method
206
Analysis of the Electromagnetic Force in Asynchronous Motor Using Time-Stepping Finite Element Method
207
Analysis of the electromagnetic inductive response of a void in a conducting-soil background
208
Analysis of the electromagnetic influences of overhead lines on nearby pipelines
209
Analysis of the Electromagnetic Interaction Between a Resonator and a Lossy Dielectric Body as a First Theoretical Approach to Noninvasive Heart Movement Detection
210
Analysis of the electromagnetic interferences between overhead power lines and buried pipelines
211
Analysis of the Electromagnetic Isolation Using Several Cascaded Metallic Holes For Applications in Microwave Circuits
212
Analysis of the electromagnetic radiation behaviour of motherboard-subboard structures
213
Analysis of the electromagnetic response of flat samples by the quasioptical method in the frequencie range 26–37.5GHz
214
Analysis of the electromagnetic scattering by a raindrop using the method of auxiliary sources
215
Analysis of the electromagnetic scattering by perfectly conducting convex polygonal cylinders
216
Analysis of the electromagnetic scattering by thick gratings using a combined FEM/MM solution
217
Analysis of the electromagnetic scattering of a corrugated surface with method of moments and impedance boundary approximation
218
Analysis of the electromagnetic scattering of rivets on the conducting plate
219
Analysis of the Electromagnetic Signals of the Human Brain: Milestones, Obstacles, and Goals
220
Analysis of the Electromagnetic Signature of Reinforced Concrete Structures for Nondestructive Evaluation of Corrosion Damage
221
Analysis of the electromagnetic torque and the effective winding inductance of a surface-mounted PMSM under integrated battery charging operation
222
Analysis of the electromagnetic transient time in DFIG during grid faults
223
Analysis of the electromagnetic wave propagation in the nonlinear Bragg grating structure
224
Analysis of the electromagnetic waves in an overmoded finite length slow wave structure
225
Analysis of the electromagnetic/coherent transport problem in graphene nanoribbons
226
Analysis of the electromechanical behaviour of the subsynchronous cascade drive
227
Analysis of the electromyogram of rapid eye movement sleep using wavelet techniques
228
Analysis of the electromyogram to evaluate the effect of Pre Orthodontic Trainer during sucking on an empty straw
229
Analysis of the Electron and Ion Fluxes to the Wall of a Hot-Filament Discharge Device
230
Analysis of the electron dynamics in a Raman free electron laser with reversed axial guide magnetic field
231
Analysis of the electron-beam-induced reaction in the precursor thin films of ferroelectric SrBi
2
Ta
2
O
9
232
Analysis of the Electronic Assembly Repair Process for Lead-Free Parts Under Combined Loading Conditions
233
Analysis of the electron-wave interaction in the orotron on the basis of the approximate analytic nonlinear theory
234
Analysis of the Electro-Optical Properties for Ultra-Wide Band Radio over Fiber Receiving System
235
Analysis of the electrorefractive effect in Ge/SiGe coupled quantum well for silicon based optical modulators
236
Analysis of the electro-thermal behaviour of multichip power modules
237
Analysis of the element pattern shape for circular arrays
238
Analysis of the elettromagnetic field and scattering of a slot antenna through hibrid 2D Wiener-Hopf technique and method of moment
239
Analysis of the elliptic-cylindrical-rectangular patch antenna
240
Analysis of the EM coupling between satellite antennas
241
Analysis of the EM Field Distribution in Smart Home
242
Analysis of the EMBRACE aperture array antenna by the characteristic Basis Function Method
243
Analysis of the Emergency Procurement Based on Evolutionary Game Theory
244
Analysis of the EMF risk issue and communication in power grid protection
245
Analysis of the EMG Signal During Cyclic Movements Using Multicomponent AM–FM Decomposition
246
Analysis of the EMI and SI effects on the flexible-PCBs for mobile application
247
Analysis of the EMI impact of an array of wind generators on the performances of secondary surveillance radar system
248
Analysis of the Emission Features in Graded-Index Polymer Optical Fiber Amplifiers
249
Analysis of the emission of American Depositary Receipts of Brazilian companies through the extraction of linguistic summaries
250
Analysis of the emissive phase of a pulsed maser
251
Analysis of the Emitter Charge Storage in SiGe Heterojunction Bipolar Transistors with a Lightly Doped Emitter
252
Analysis of the emitter switched thyristor electrical characteristics
253
Analysis of the emitter-down configuration of double-heterojunction bipolar transistor
254
Analysis of the emittivity of a chirally shielded cable
255
Analysis of the encoding scheme for CS-ACELP codec for secured VoIP communication
256
Analysis of the end regions of the CERN lead-ion 4-rod RFQ
257
Analysis of the end winding heat transfer variation with altitude in electric motors
258
Analysis of the end-effects in magnetic gears and magnetically geared machines
259
Analysis of the end-to-end performance of multimedia information services on a local area network
260
Analysis of the Endwinding Cooling Effects in TEFC Induction Motors
261
Analysis of the Endwinding Cooling Effects in TEFC Induction Motors
262
Analysis of the energization test of 2600-km long AC-Link composed of similar transmissions lines
263
Analysis of the Energization Test of a Half-Wavelength AC Link Composed of Similar Transmission Lines
264
Analysis of the energy based control for swinging up two pendulums
265
Analysis of the energy consumption for the clustered topology constructed by combining RNG and GCA
266
Analysis of the energy dynamic of UWB signal in multi-path environments
267
Analysis of the energy efficiency of a Virtual MIMO system with a large antenna array
268
Analysis of the energy flow on quadruped robot having a flexible trunk joint
269
Analysis of the Energy Quantization Effects on Single Electron Inverter Performance through Noise Margin Modeling
270
Analysis of the energy sector of Paraguay. Energy balance in terms of useful energy in 2011
271
Analysis of the energy storage operation of electrical vehicles with a photovoltaic roof using a Markov chain model
272
Analysis of the energy structure of nitrogen δ-doped GaAs superlattices for high efficiency intermediate band solar cells
273
Analysis of the energy usage in university buildings: The case of aristotle university campus
274
Analysis of the energy-based control for swinging up two pendulums
275
Analysis of the Energy-Response Time Tradeoff for Mobile Cloud Offloading Using Combined Metrics
276
Analysis of the Engineering and Technology Management (ETM) Educational Programs
277
Analysis of the enhanced hot-electron injection in split-gate transistors useful for EEPROM applications
278
Analysis of the entanglement of down converted photon pairs passing through double slits
279
Analysis of the envelope and the instantaneous phase and frequency of superregenerative oscillators
280
Analysis of the environmental benefits of Distributed Generation
281
Analysis of the EPC period deciding model based on the Game Theory
282
Analysis of the equal-delay topology for transformers and hybrid networks
283
Analysis of the equal-delay transformer with non-commensurate constituent transmission lines
284
Analysis of the Equiangular Spiral Antenna on a Dielectric Substrate
285
Analysis of the equipment maintainability qualitative evaluation index based on interpretive structure modeling
286
Analysis of the equivalences and dominances of transient faults at the RT level
287
Analysis of the equivalent circuit of Prishchepenko-type spiral MCGs
288
Analysis of the error extension mechanisms within the European plesiochronous digital hierarchy
289
Analysis of the error in the reconstruction of N-dimensional stochastic processes
290
Analysis of the Error on Fitting Highway Alignment Based on the Cubic Spline Function
291
Analysis of the error performance of adaptive array antennas for CDMA with noncoherent M-ary orthogonal modulation in Nakagami fading
292
Analysis of the error performance of trellis-coded modulations in Rayleigh-fading channels
293
Analysis of the error probability for optical unipolar two-dimensional codes using a serial elimination interferences receiver
294
Analysis of the error probability of a binary receiver in wireless fading channels
295
Analysis of the Error Signal of the LMS Algorithm
296
Analysis of the error surface of the adaptive stochastic filter
297
Analysis of the error susceptibility of a field programmable gate array-based image compressor through random event injection simulation
298
Analysis of the errors on the output voltage of inverter caused by switching dead times
299
Analysis of the errors produced by the 2004 BBN speech recognition system in the DARPA EARS evaluations
300
Analysis of the Euclidean direction set adaptive algorithm
301
Analysis of the Evolution of C-Space Models built through Incremental Exploration
302
Analysis of the Evolution of Enterprise Strategic Network: From an Ecological Perspective
303
Analysis of the evolution of features in classification problems with concept drift: Application to spam detection
304
Analysis of the evolution on tidal flat and their reasons in Dongsha based on remote sensing
305
Analysis of the evolution to an IP-based UMTS terrestrial radio access network
306
Analysis of the Evolvement in the Industry System Based on the Capacity-Intensive Angle
307
Analysis of the Excellent Memory Disturb Characteristics of a Hourglass-Shaped Filament in Al
2
O
3
/Cu-Based CBRAM Devices
308
Analysis of the excess Inter-Arrival Time distribution
309
Analysis of the excision CFAR detector in the presence of fluctuating targets
310
Analysis of the Excitation, Interaction, and Detection of Bulk and Surface Acoustic Waves on Piezoelectric Substrates
311
Analysis of the execution of a next generation application on superscalar and grid processors
312
Analysis of the execution time unpredictability caused by dynamic branch prediction
313
Analysis of the Exergy Efficiency and Influencing Factor of CFB Boiler
314
Analysis of the existence of complete band gaps in periodic binary piezoelectric phononic crystals based on connectivity
315
Analysis of the Existing Healthcare Information Systems for Medical Settings in Russia, 2005-2006
316
Analysis of the expansion functions coefficients in the moment method: a case study
317
Analysis of the Expansion of the Panama Canal using simulation modeling and artificial intelligence
318
Analysis of the expected error performance of cooperative wireless networks employing distributed space-time codes
319
Analysis of the Experiment of Light Polarization
320
Analysis of the Experimental Results for Dry Band Arcing Deterioration of ADSS Fiber-Optic Cables in High Electric Field
321
Analysis of the Experimental Results for Quantum Key Distribution Cryptography in IEEE 802.11 Networks
322
Analysis of the exploitation and utilization and development prospects of coal bed methane in China
323
Analysis of the Exponential Signal by the Interpolated DFT Algorithm
324
Analysis of the exponentially decaying transient current in MOS capacitors
325
Analysis of the expression and the activity of the putative alkaline phosphatases in Cyanobacterium Anabaena FACHB709
326
Analysis of the Extended Forward Converter for Fuel Cell Applications
327
Analysis of the external feedback effects on the relative intensity noise characteristics of the strained AlGaInN LDs
328
Analysis of the extra delay on interconnects caused by resistive opens and shorts
329
Analysis of the extraction efficiency in GaN-on-sapphire light emitting diodes
330
Analysis of the Fabrication Process of Multilayer Vertical Stacked Capacitors
331
Analysis of the fabrication process of Nb/Al-AlN
x
/Nb tunnel junctions with low R
n
A values for SIS mixers
332
Analysis of the Factors Affecting Field Quality and Heat Releases of the Quadrupole Magnet for the SIS 300
333
Analysis of the Factors Affecting Secondary Arc Current on UHV Transmission Lines
334
Analysis of the factors affecting the credit risk of China´s listed companies
335
Analysis of the factors affecting the cross-border mergers and acquisitions of Chinese technology sourcing companies
336
Analysis of the Factors Affecting the Income of the Farmers in Rural Tourism of Dujiangyan City on the Base of Regression Model
337
Analysis of the factors affecting the technical efficiency of listed logistics companies in China — Based on Tobit mode
338
Analysis of the Factors Impacting the Decision-Making on Higher Education Investment by Rural Households
339
Analysis of the factors influencing surface sensible heat fluxes with large aperture scintillometers
340
Analysis of the Factors Influencing the Area Distribution of Urban Energy Efficiency
341
Analysis of the factors influencing the attitude determination accuracy based on orthogonal experiment
342
Analysis of the Factors Influencing the Development of Regional Economy Based on Research into Rough Set and Entropy Theory
343
Analysis of the Factors Influencing the Energy Consumption Pattern of Two Million Level Cities In China
344
Analysis of the factors influencing the SSRC performance
345
Analysis of the factors of influencing parent´s confidence on the internet by associating rules mining
346
Analysis of the factors that affect QPSK
347
Analysis of the factors to affect technology transfer fee in the intellectual property management
348
Analysis of the failing reason of MEI-ABC in edge-based finite element method in time domain
349
Analysis of the Failure in a Turbine-Generator Shaft
350
Analysis of the failure mechanisms for LED display and the preventive solutions
351
Analysis of the Failure of a Vacuum Circuit Breaker Applied on a Consumer - Utility Interface
352
Analysis of the familiarity and mutual dependency of firms from the perspective of SME CINs´ effectiveness
353
Analysis of the far field of permanent-magnet motors and effects of geometric asymmetries and unbalance in magnet design
354
Analysis of the Faraday rotation in a magnetized plasma
355
Analysis of the far-field pattern of an extended hemispherical lens/objective lens antenna system
356
Analysis of the far-field pattern of an optical waveguide array using the finite-difference beam-propagation method
357
Analysis of the far-field radiation of a Hertzian dipole embedded in EBG structures of periodic lossy multilayers using the equivalent BCITL model
358
Analysis of the far-field radiation of a Hertzian dipole embedded in electromagnetic bandgap (EBG) structures of periodic lossless multilayers using equivalent CCITL models
359
Analysis of the FAST ICRH antenna with salted water load using HFSS code
360
Analysis of the FAST ICRH antenna with salted water load using HFSS code
361
Analysis of the fatigue causes on the rotor bars of squirrel cage asynchronous motors: experimental analysis and modelling of medium voltage motors
362
Analysis of the fault injection mechanism related to negative and positive power supply glitches using an on-chip voltmeter
363
Analysis of the fault type for adaptive single-phase autoreclosure
364
Analysis of the Fault-Tolerance Capacity of the Multilevel Active-Clamped Converter
365
Analysis of the FB-ZCS-PWM converter as a power factor preregulator
366
Analysis of the FDTD method via the discrete oscillator
367
Analysis of the FEA amplifier
368
Analysis of the feasibility of CF
3I/CO
2
used in C-GIS by partial discharge inception voltages in positive half cycle and breakdown voltages
369
Analysis of the feasibility of dynamic thermal testing in digital circuits
370
Analysis of the feasibility of exercise intervention in University Students´ Internet Addiction on exercise psychology
371
Analysis of the feedback system used to damp longitudinal quadrupole-mode bunch oscillations
372
Analysis of the femtosecond isomerization reaction mechanism of rhodopsin
373
Analysis of the ferroresonant transformer with a rectified output in the low-line-voltage minimum-line-frequency full-load condition
374
Analysis of the Fetch-Related Bias in Altimeter Wind Speed Measurements
375
Analysis of the field distribution in ATEM cell using the three dimensional FDTD-method
376
Analysis of the Field Distribution inside Dielectric Object Loaded in TEM Cell Using Hybrid FEM-BEM Method
377
Analysis of the field distribution stimulated on the slots of the leaky coaxial cables
378
Analysis of the field effect in a metal-oxide-small-grain polysilicon structure-experimentation and modeling
379
Analysis of the field electron energy distribution from amorphous carbon-nitride film
380
Analysis of the field emitter triode (FET) as a pressure sensor
381
Analysis of the field of narrow-band signals percolating into marine bottom
382
Analysis of the Field of the Ferroelectric Domaim Layer Mode
383
Analysis of the field radiated by a rotating electric dipole inside a resonant chamber
384
Analysis of the field within bounded wave simulator with a large test object in the working volume
385
Analysis of the File System and Block IO Scheduler for SSD in Performance and Energy Consumption
386
Analysis of the Film Selection Process for a Film Festival
387
Analysis of the film thickness dependence of a single-phase unidirectional transducer using the coupling-of-modes theory and the finite-element method
388
Analysis of the filtered-X LMS algorithm
389
Analysis of the filtered-X LMS algorithm
390
Analysis of the filtered-X LMS algorithm and a related new algorithm for active control of multitonal noise
391
Analysis of the Filters Installed in the Interconnection Points Between Different Railway Supply Systems
392
Analysis of the Financial Crisis of 2007-2009 and Its Impact on Terrorism
393
Analysis of the fine structure of distributions of solar system´s small bodies´ orbits. Near Earth asteroids
394
Analysis of the FinFET parasitics for improved RF performances
395
Analysis of the finite-impulse-response (FIR) filters implementation in the modeling of the single-mode optical fiber
396
Analysis of the Fixed Bed Reactor for DME Synthesis
397
Analysis of the Fixed Point Transformation Based Adapive Robot Control
398
Analysis of the Fixed-Assigned TDMA Technique with Finite Buffer Capacity
399
Analysis of the FKIE Passive Radar Data Set with GMPHD and GMCPHD
400
Analysis of the Flash ADC Bandwidth–Accuracy Tradeoff in Deep-Submicron CMOS Technologies
401
Analysis of the FLC with shrinking span membership functions
402
Analysis of the flight performance of small magnetic rotating wings for use in microrobots
403
Analysis of the floating gate defect in CMOS
404
Analysis of the floating voltage transfer characteristic and comparison of circuit styles in partially depleted SOI-CMOS
405
Analysis of the flow condition in a cross flow turbine
406
Analysis of the flow of encapsulant during underfill encapsulation of flip-chips
407
Analysis of the flow ripple stochastic characteristics in dual-pump converging system
408
Analysis of the fluctuating logistic mapping for a Boltzmann machine
409
Analysis of the FM discriminator with frequency feedback
410
Analysis of the FM radio spectrum for Internet of Things opportunistic access via Cognitive Radio
411
Analysis of the force characteristic on the armature of inductive coil launcher and trigger strategy
412
Analysis of the forces between anisotropic magnets
413
Analysis of the foreign languages and cultures training and its importance in French engineering education
414
Analysis of the Forensic Traces Left by AirPrint in Apple iOS Devices
415
Analysis of the fork-join queue
416
Analysis of the formation and elimination of loops in twisted cable
417
Analysis of the formation and interaction of solitons in nonlinear transmission lines by means of a harmonic balance technique
418
Analysis of the forming defects of the trapezoidal inner-gear spinning
419
Analysis of the forward biased safe operating area of the super junction MOSFET
420
Analysis of the four basic resonant mode types of an enclosed rectangular microstrip patch including the effects of coupling between patches
421
Analysis of the four-horn monopulse for LEO satellite tracking using the exact model
422
Analysis of the Fourier split-step method for resolution of radio propagation over the sea
423
Analysis of the four-phase switched reluctance motor drive under the lacking one phase fault condition
424
Analysis of the fourth leg command of a three-phase active filter inverter
425
Analysis of the fractal characteristic of the hyperspectral curves of the rice under plumbum pollution stress
426
Analysis of the fractional order system in the thermal diffusive interface - Part 1: Application to a semi-infinite plane medium
427
Analysis of the fractional order system in the thermal diffusive interface - Part 2: Application to a finite plane medium
428
Analysis of the Framework for Financial Decision Support System
429
Analysis of the Free Energy in a Stochastic RNA Secondary Structure Model
430
Analysis of the French lightning locating system location accuracy
431
Analysis of the frequency and polarization indexes over snow cover areas by means of experimental and theoretical data
432
Analysis of the Frequency and Power Performances of Tunnel Diode Generators
433
Analysis of the frequency and sensitivity of crystal-controlled oscillators
434
Analysis of the frequency and time variation of radio signals scattered by a Wind Turbine
435
Analysis of the Frequency Characteristics of a Three-Phase Induction Motor
436
Analysis of the Frequency Delay Outburst in the Active Galactic Nucleus using the Discrete Correlation Function
437
Analysis of the frequency dispersion of the transconductance in recessed and unrecessed low temperature GaAs FETs
438
Analysis of the frequency domain adaptive filter
439
Analysis of the Frequency Locking Region of Coupled Oscillators Applied to 1-D Antenna Arrays
440
Analysis of the frequency noise of tunable multisection DBR lasers
441
Analysis of the Frequency Offset Effect on Random Access Signals
442
Analysis of the Frequency Offset Effect on Zadoff–Chu Sequence Timing Performance
443
Analysis of the frequency response curve of a differential-type electrostatic actuator
444
Analysis of the Frequency Response of Carbon Nanotube Transistors
445
Analysis of the frequency response of SAW filters using finite-difference time-domain method
446
Analysis of the frequency response of SAW filters using finite-difference time-domain method
447
Analysis of the frequency stability history of GPS Navstar clocks
448
Analysis of the frequency stability of on-orbit GPS Navstar clocks
449
Analysis of the frequency-domain block LMS algorithm
450
Analysis of the frequency-domain block LMS algorithm
451
Analysis of the frequency-domain Wiener filter with the prediction gain
452
Analysis of the frontal plane alignment in AK prosthesis
453
Analysis of the front-end wet strip efficiency performance for productivity
454
Analysis of the FSMs implementation with mini-microprocessors in FPGAs
455
Analysis of the Fugl-Meyer Outcome Measures Assessing the Effectiveness of Robot-Mediated Stroke Therapy
456
Analysis of the full-wave magnetic amplifier circuits considering the change of the width of the dynamic hysteresis loop
457
Analysis of the function of an accelerometer as feedback instrument within a lateral autopilot
458
Analysis of the fundamental error statistics in DPSK systems using a Markov chain model (Corresp.)
459
Analysis of the Fuzzy Controllability Property and Stabilization for a Class of T–S Fuzzy Models
460
Analysis of the fuzzy logic controller using product-sum-gravity inference method
461
Analysis of the FXLMS algorithm with norm-constant time-varying primary path
462
Analysis of the GaAs/GaAsBi Material System for Heterojunction Bipolar Transistors
463
Analysis of the gain distribution across the active region of InGaAs-InAlGaAs multiple quantum well lasers
464
Analysis of the gain effect in one-dimension active photonic crystals
465
Analysis of the GaInP/GaAs/1-eV/Ge cell and related structures for terrestrial concentrator application
466
Analysis of the Game Models between Governments and Enterprises in Cultivating Regional Brands of Industrial Clusters
467
Analysis of the gap between behavioral and gate level fault simulation
468
Analysis of the Gap-Coupled P-N-Diode Array/LiNbO
3
Storage Correlator in the Flash Mode
469
Analysis of the gastrointestinal status from wireless capsule endoscopy images using local color feature
470
Analysis of the gate voltage fluctuations in ultra-thin gate oxides after soft breakdown
471
Analysis of the Gated IPACT Scheme for EPONs
472
Analysis of the gate-source/drain capacitance behavior of a narrow-channel FD SOI NMOS device considering the 3-D fringing capacitances using 3-D simulation
473
Analysis of the gate-voltage-dependent series resistance of MOSFET´s
474
Analysis of the Gaussian-beam diffraction on the impedance knife-edge using-the uniform asymptotic theory
475
Analysis of the GCC-PHAT technique for multiple sources
476
Analysis of the Gene model and the process of evolution of enterprise IT control capability
477
Analysis of the general nonsymmetrical directional coupler with arbitrary terminations
478
Analysis of the General Packet Radio Service (GPRS) of GSM as access to the Internet
479
Analysis of the Generalized DF-CF for Gaussian Relay Channels: Decode or Compress?
480
Analysis of the generalized elliptical waveguide by separation of variables
481
Analysis of the generator-transformer interaction in the abc reference
482
Analysis of the genetic algorithm Gamic for multicriteria classification of inventories
483
Analysis of the genetic potential and gene expression of microbial communities involved in the in situ bioremediation of uranium and harvesting electrical energy from organic matter
484
Analysis of the geometrical features of Photospheric Bright Points in the quiet-sun region
485
Analysis of the geometry on robustness of ESD protection devices
486
Analysis of the global vegetation dynamic metrics using MODIS Vegetation Index and land cover products
487
Analysis of the GMPLS Control Plane Security
488
Analysis of the Go-Back-
Protocol on Finite-State Markov Rician Fading Channels
489
Analysis of the Go-Back-N Protocol on Finite State Markov Fading Channels
490
Analysis of the Godunov-Based Hybrid Model for Ramp Metering and Robust Feedback Control Design
491
Analysis of the government´s role in the marketization of public service based on European and Chinese cases
492
Analysis of the GPS acquisition environment: indoors and outdoors
493
Analysis of the Gradient-Descent Total Least-Squares Adaptive Filtering Algorithm
494
Analysis of the Grand Alliance HDTV transmission subsystem field test measurements in Charlotte, North Carolina
495
Analysis of the Great Britain´s power system with Electric Vehicles and Storage Systems
496
Analysis of the grey matrix game model in stock speculation for immediate price-margin based on grey information
497
Analysis of the Grey Prediction Model Application in Port Throughput
498
Analysis of the grid harmonics and their impacts on distribution transformers
499
Analysis of the grid side behavior of a LCL-filter based three-phase active rectifier
500
Analysis of the grid-connected PV plants behavior with FACTS influence
501
Analysis of the ground deformation to large cross- section tunnel by Pipe-roof Pre-construction Method
502
Analysis of the ground effect in the single phase fault location for power distribution systems
503
Analysis of the group delay distortion in Traveling Wave tubes
504
Analysis of the group structure of a school of biomimetic AUVS coordinated using nearest neighbour principles
505
Analysis of the growth of China´s SME board listed company in 2008 after financial crisis
506
Analysis of the Growth Process and Pinning Mechanism of Low-Fluorine MOD YBa
2
Cu
3
O
7-δ
Films With and Without BaZrO
3
Artificial Pinning Centers
507
Analysis of the Guangzhou urban heat island effect
508
Analysis of the guided modes in slab-coupled waveguides using a variational method
509
Analysis Of The Guinea Pig Cochlea Using A General Cylindrical Coordinate System
510
Analysis of the gyrotron amplifier for azimuthally varying TE modes
511
Analysis of the half-bridge boost rectifier as integrated electronic ballast with power factor correction
512
Analysis of the half-wave voltage and modulation bandwidth of electro-optical modulator considering the effect of conductor loss
513
Analysis of the Hamilton-Jacobi equation in nonlinear control theory by symplectic geometry
514
Analysis of the hand effect on head SAR with generic and CAD phone models using FDTD
515
Analysis of the Hand Motion Trajectories for Recognition of Air-Drawn Symbols
516
Analysis of the handover issue in mobile personal communication systems using N-dimensional space
517
Analysis of the handover procedure in Follow-Me Cloud
518
Analysis of the haptic collision and deformation of the blood vessel model for the microsurgery training system
519
Analysis of the Hardware Verification of the Honeywell SCOMP
520
Analysis of the Harmonic Distortion and the Effects of Attenuation and Diversity in Residential Areas
521
Analysis of the harmonic distortion impact of photovoltaic generation in Brazilian residential networks
522
Analysis of the harmonic distortion impact on the operation of digital protection systems
523
Analysis of the harmonic distortion resulting from the interaction between synchronous machines and HVDC convertors
524
Analysis of the harmonic influence to the engineering measurement
525
Analysis of the harmonic resonance during energizing the primary restorative transmission systems
526
Analysis of the harmonics contribution on the three-point interpolated DFT frequency estimator
527
Analysis of the harmonics losses and bearing load for motorized high speed spindle part I: Modeling
528
Analysis of the Hash Function Design Strategy Called SMASH
529
Analysis of the head tail damping and growth time for the estimation of the ESRF machine impedance
530
Analysis of the healing process in superficial skin wounds irradiated with a blue-LED photocoagulator
531
Analysis of the heart rate and its variation affecting image quality and optimized reconstruction window in retrospective ECG-gated coronary angiography using multidetector row CT
532
Analysis of the heart rate variability and stratification of the risk of cardiac patients with Chagas’ disease
533
Analysis of the heart rate variability and ventricular repolarization during pregnancy and after labour
534
Analysis of the Heat Loss Due to Exhaust Gas of CFB Boiler with the Limestone Desulfurization
535
Analysis of the heat removal capability of the power distribution network in 3D ICs
536
Analysis of the heat transfer characteristics in a thermoelectric conversion device
537
Analysis of the height determination defect of aeronautic celestial navigation system and its solution research
538
Analysis of the helical twisted-wire pair running above ground: transfer function evaluation
539
Analysis of the Helium Behavior Due to AC Losses in the KSTAR Superconducting Coils
540
Analysis of the helix and transverse angles of the muscle fibers in the myocardium based on Diffusion Tensor Imaging
541
Analysis of the helix as an RF applicator for hyperthermia
542
Analysis of the hemispheric asymmetry using fractal dimension of a skeletonized cerebral surface
543
Analysis of the heterostructures Stark resonance by using generalized impedance method
544
Analysis of the Hg-Na arc-W cathode interactions at increasingly high Na contents
545
Analysis of the hidden node problem in HIPERLAN
546
Analysis of the Hierarchical Characteristics of IP-Level Topology Dynamic Node
547
Analysis of the hierarchical LMS algorithm
548
Analysis of the high bit-rate 1.55 /spl mu/m lightwave system with the limited P-i-N photodiode bandwidth
549
Analysis of the high frequency series impedance of GaAs Schottky diodes by a finite difference technique
550
Analysis of the high frequency spreading resistance for surface channel planar Schottky diodes
551
Analysis of the high resolution ECG with the continuous wavelet transform
552
Analysis of the high temperature characteristics of InGaAs-AlGaAs strained quantum-well lasers
553
Analysis of the High-Field Losses of Polyvinylidene Fluoride Transducers
554
Analysis of the HIV eradication phenomenon at the early stage of infection with an extracellular deterministic model
555
Analysis of the HMF Riser Connector
556
Analysis of the hollow cathode emitted electron beams in a radial multichannel pseudospark
557
Analysis of the HOM damping with modulated beam in the first prototype of superstructure
558
Analysis of the hopper model in a measurement unit by weighing
559
Analysis of the hot spots of coated pits in live cells
560
Analysis of the human EEG using self-organising neural nets
561
Analysis of the Human Head Interaction in Handset Antennas with Slotted Ground Planes
562
Analysis of the human perception threshold of an ELF electric field
563
Analysis of the hybrid HOL/PBS queueing scheme for multiclass calls in multimedia PCS
564
Analysis of the hybrid modes for an eccentric cladded, three-layer, dielectric, waveguide
565
Analysis of the Hybrid Modes for an Eccentrically Cladded Fiber
566
Analysis of the hybrid poles permanent magnet generator using tooth flux method
567
Analysis of the hybrid scheduling algorithm in the gird environment
568
Analysis of the hybrid-polarity SAR architecture for oil spill observation
569
Analysis of the hydrodynamic torque effects on large size butterfly valves
570
Analysis of the Hydro-geochemical and Isotope Characteristics in Bangnazhang-huangcaoba Hot Spring
571
Analysis of the hyperfine interactions in the inorganic and coordination compounds by DFT calculations
572
Analysis of the Hysteresis Machine - Part I
573
Analysis of the I(V) characteristics of P
+
N π P
+
structures for the determination of hole velocity in silicon
574
Analysis of the I(V) characteristics of p
+
-n-π-p
+
structures for the determination of hole velocity in silicon
575
Analysis of the I(V) characteristics of p
+
-n-π-p
+
structures for the determination of hole velocity in silicon
576
Analysis of the Iberian Power Forward Price Formation
577
Analysis of the ideal SFDR limit for an N bit digital-to-analog converter
578
Analysis of the Identification of Oil Tank´s Position and the Calibration of Tank Capacity Table
579
Analysis of the IEEE 802.11e EDCA Under Statistical Traffic
580
Analysis of the IEEE 802.15.4 Standard for a Wireless Closed Loop Control System for Heavy Duty Cranes
581
Analysis of the IEEE 802.15.4a UWB PHY layer for optimizing the power consumption of the transmitter
582
Analysis of the IEEE 802.4 token-passing mechanism with noise
583
Analysis of the IFRS Taxonomy Extension Mode
584
Analysis of the IGBT under QR-ZCS operation using a special test circuit
585
Analysis of the IGBT/freewheeling diode switching behaviour during turn-on in hard switching applications
586
Analysis of the image produced by Scheffler paraboloidal concentrator
587
Analysis of the impact caused by low voltage customers harmonic generation in the distribution grid by a harmonic three-phase load flow based on the current summation
588
Analysis of the impact of a mentoring program in the computer science degrees at the Universitat Politecnica de Valencia - Impact of the PATU program at the Escuela Tecnica Superior de Ingenieria Informatica of the UPV
589
Analysis of the impact of background traffic on the performance of 802.11 power saving mechanism
590
Analysis of the impact of bus implemented EDCs on on-chip SSN
591
Analysis Of The Impact of Channel Estimation Errors on the Decomposition of Multiuser Mimo Channels
592
Analysis of the impact of channel estimation errors on the performance of a decision-feedback equalizer in fading multipath channels
593
Analysis of the impact of cloud computing technology to e-government performance evaluation
594
Analysis of the Impact of Cloud Computing Technology to E-government Performance Evaluation
595
Analysis of the Impact of CPU Virtualization on Parallel Applications in Xen
596
Analysis of the impact of cross-border balancing arrangements for Northern Europe
597
Analysis of the impact of CT based attenuation correction, scatter compensation and 3D-beam modeling on SPECT image quality
598
Analysis of the impact of current ripple on the eddy current loss of axial-flux permanent magnet motor
599
Analysis of the impact of data correlation on adaptive sampling in Wireless Sensor Networks
600
Analysis of the impact of data resolution on the speaker recognition effectiveness in embedded fixed-point systems
601
Analysis of the impact of demand uncertainty on retailer´s dominance in coordinating closed loop supply chain with production remanufacturing
602
Analysis of the Impact of Demosaicking on JPEG Image Compression
603
Analysis of the impact of DG on distribution network reconfiguration using OpenDSS
604
Analysis of the impact of different methods for division/square root computation in the performance of a superscalar microprocessor
605
Analysis of the impact of distributed generation on automatic reclosing
606
Analysis of the impact of distributed generation placement on voltage profile in distribution systems
607
Analysis of the impact of Doppler spread on OFDM-based next-generation high-speed rail broadband mobile communications
608
Analysis of the impact of Duplicated ACK on the performances of TCP
609
Analysis of the impact of early fiber access deployment on residential Internet traffic
610
Analysis of the impact of electronic commerce on the international trade
611
Analysis of the Impact of Energy-Saving Factors on the Heating System with Distributed Variable Frequency Pump
612
Analysis of the impact of FEC techniques on a multicast video streaming service over LTE
613
Analysis of the impact of finite OFF-state impedance of peaking branch on the efficiency of Doherty amplifiers
614
Analysis of the impact of gate-body signal phase on DTMOS inverters in 0.13 μm PD-SOI
615
Analysis of the Impact of Heterogeneous Network Environment on Worm Propagation
616
Analysis of the Impact of High-Order Integrator Dynamics on SC Sigma-Delta Modulator Performances
617
Analysis of the Impact of Implied Scenarios on the Reliability of Computational Concurrent Systems
618
Analysis of the Impact of Induction Generators on Distribution Systems Voltage Sags Due to Unbalanced Faults
619
Analysis of the Impact of Intensive Attacks on the Self-Similarity Degree of the Network Traffic
620
Analysis of the impact of interfacial oxide thickness variation on metal-gate high-K circuits
621
Analysis of the impact of internal loads on the behavior and electrical energy consumption of a building
622
Analysis of the impact of internationalization on management for sustainability and business performance
623
Analysis of the impact of intra-die variance on clock skew
624
Analysis of the impact of intrinsic parameter fluctuations in a 50 nm InP HEMT
625
Analysis of the impact of IPSec on performance characteristics of VoIP networks and voice quality
626
Analysis of the impact of linewidth variation on low-k dielectric breakdown
627
Analysis of the impact of man-made noise on DVB-T and DVB-T2
628
Analysis of the impact of measured UWB RCS on high-resolution imaging in bistatic SAR
629
Analysis of the impact of measurement noise on the TWSTFT stability
630
Analysis of the impact of medical technology assessment subjects on BME Curricula
631
Analysis of the impact of multiple services on dynamic carrier allocations for third generation TDMA systems
632
Analysis of the impact of new power sources to voltage sags using Zbus
633
Analysis of the Impact of Nonlinearity on the Capacity of Communication Channels
634
Analysis of the impact of nuclear power plant on Malaysia´s power systems: Costs, CO
2
emission and system reliability
635
Analysis of the impact of particle separation in a plasmonic spherical dimer on the resonance wavelength
636
Analysis of the impact of phase- and amplitude distortions on the beam accuracy of active antenna arrays for mobile communication
637
Analysis of the impact of PHEVs on the electric power distribution network
638
Analysis of the Impact of Polarization Mode Dispersion on Optical Fiber Communication
639
Analysis of the Impact of Polyimide Coating on Passivation Reliability by Simulation
640
Analysis of the impact of prices and cost on the yield of rice, wheat and maize
641
Analysis of the impact of primary user switching strategies in cognitive radio networks
642
Analysis of the impact of process variations on clock skew
643
Analysis of the impact of process variations on static logic circuits versus fan-in
644
Analysis of the impact of proximity correction algorithms on circuit performance
645
Analysis of the impact of pulse-width modulated inverter voltage waveforms on AC induction motors
646
Analysis of the impact of pulse-width modulated inverter voltage waveforms on AC induction motors
647
Analysis of the impact of random process variations in CMOS tapered buffers
648
Analysis of the impact of reading technique and inspector capability on individual inspection performance
649
Analysis of the impact of rear side geometry on performance of back-contact back-junction solar cells
650
Analysis of the Impact of Refactorings on the Performance of Embedded Systems
651
Analysis of the impact of release area on the quality factor of contour-mode resonators by laser Doppler vibrometry
652
Analysis of the Impact of Reservoir Water Level Fluctuation on the Stability of Cohesive Colluvial Landslide in the Three Gorges Reservoir Area
653
Analysis of the impact of sensor noise on formation flying control
654
Analysis of the Impact of Site Planning on the Performance of Relay Deployments
655
Analysis of the Impact of Social Network on College Students -- An Empirical Study of renren.com
656
Analysis of the impact of statistical variations on transmission-line based metamaterial structures
657
Analysis of the impact of strand joints and copper location on the current distribution and stability in cable-in-conduit conductors
658
Analysis of the impact of SVG on the voltage stability of an actual wind farm
659
Analysis of the impact of swarm mobility on performance of routing protocols in MANETs
660
Analysis of the impact of temporal, spatial, and quantization variations on perceptual video quality
661
Analysis of the Impact of the Number of Reporting Nodes on Sensor Networks Lifetime
662
Analysis of the Impact of the Physical Environment on a Wireless Sensor Network
663
Analysis of the impact of translating cowl on hypersonic vehicle performance
664
Analysis of the impact of urbanization on regional flood risk: A case study in the Qinhuai River Basin, China
665
Analysis of the impact of using different diversity functions for the subgroup discovery algorithm NMEEF-SD
666
Analysis of the impact of vias on resonant rotary traveling wave oscillators
667
Analysis of the impact of voltage on the loss allocation method based on circuit theory
668
Analysis of the Impact of Wavelength Converters on Contention Resolution in Optical Burst Switching
669
Analysis of the Impact of WiMAX-OFDM Interference on Multiband OFDM
670
Analysis of the impact on the dish centrifugal separator´s drum stress of rotary drum parameters
671
Analysis of the impact on the quality of an elastogram, of the algorithms for strains calculation
672
Analysis of the Impact on WCDMA R99 Network by the Introduction of HSPA
673
Analysis of the impacts caused by the digitization of diagnostic imaging in a hospital, in the view of everyone involved
674
Analysis of the impacts of distributed generation sources considering the appropriate choice of parameters in a multi-objective approach for distribution system planning
675
Analysis of the Impacts of Distribution Connected PV Using High-Speed Datasets
676
Analysis of the Impacts of Flocculation Modes and Coagulant Dose on Dissolved Air Flotation
677
Analysis of the impacts of overestimation sources on the accuracy of worst case timing analysis
678
Analysis of the impacts of plug-in electric vehicle charging on the part of a real low voltage distribution network
679
Analysis of the impacts of plug-in electric vehicle charging on the part of a real medium voltage distribution network
680
Analysis of the impacts of signal rise/fall time and skew variations in coupled-RLC interconnects
681
Analysis of the Impacts of Signal Slew and Skew on the Behavior of Coupled
RLC
Interconnects for Different Switching Patterns
682
Analysis of the Impacts of Uplink Co-Channel Interference on Cell Coverage in an IEEE 802.16m System
683
Analysis of the impedance changes of a HF/VHF monopole antenna in a Brazilian Atlantic rainforest urban site
684
Analysis of the impedance loaded dipole antennas with FDTD method for pulse radiation
685
Analysis of the impedance measurement of transmission lines with one-phase ground fault
686
Analysis of the impedance measurement of transmission lines with two-phase short circuit
687
Analysis of the impedance of a coaxial, large-bore copper-vapor laser
688
Analysis of the impedance resonance of piezoelectric stacks
689
Analysis of the implementation characteristics of DDoS attacks on Wi-Fi networks
690
Analysis of the implementation of hybrid functions in the current brazilian digital television system
691
Analysis of the implementation of the information security management in the IPTV/VoIP system of the Telecom operator
692
Analysis of the importance of business process management depending on the organization structure and culture
693
Analysis of the improved knapsack cipher
694
Analysis of the improved soft-commutated PWM inverter by using an AC current transformer
695
Analysis of the impulse radiating antenna
696
Analysis of the inactivation mechanism of bacteriophage ⊘X174 by atmospheric pressure discharge plasma
697
Analysis of the Inactivation Mechanism of Bacteriophage
by Atmospheric Pressure Discharge Plasma
698
Analysis of the incentive problems considering intrinsic motivation and multiple objectives of the agent
699
Analysis Of The Incident Plasma And Vapor Shield Plasma In Pladis I, A Plasma Disruption Simulator
700
Analysis of the inconsistency in assessing the probability of subjective events
701
Analysis of the increase in harmonic of the MG power system and improvement plan for this increase
702
Analysis of the increase of distribution network efficiency in parallel operation of the main transformers in high-voltage substations
703
Analysis of the Independent Positions of Reverberation Chamber Stirrers as a Function of Their Operating Conditions
704
Analysis of the Indian situation for time of the day tariff
705
Analysis of the indications of empirical prescription in TCM based on association rules
706
Analysis of the indications of empirical prescription in TCM based on association rules
707
Analysis of the Indoor Broadband Power-Line Noise Scenario
708
Analysis of the indoor localization game
709
Analysis of the indoor positioning performance of a switched six-beams dodecahedral antenna
710
Analysis of the indoor propagation losses for the portable phone "Pointel"
711
Analysis of the induced current in the armature of induction type electromagnetic driver
712
Analysis of the induced EMF in permanent magnet brushless motors
713
Analysis of the Induced Stresses in Silicon During Thermcompression Cu-Cu Bonding of Cu-Through-Vias in 3D-SIC Architecture
714
Analysis of the inductance and switching frequency trade-off in integrated DC-DC converters
715
Analysis of the inductance and the stray capacitance of the dry-etched micro inductors
716
Analysis of the Induction and Dependence Relationship between Foreign Final Demand and China´s Output
717
Analysis of the induction machine parameter identification
718
Analysis of the Induction Machine Parameter Identification
719
Analysis of the induction machine substituting circuit
720
Analysis of the inductive effects of overhead lines to close pipelines
721
Analysis of the inductive turn-off of double gate MOS controlled thyristors
722
Analysis of the industrial product-service systems (IPS2) literature: A systematic review
723
Analysis of the Inflow of Foreign Capital Impact on Chinese Banking Industry
724
Analysis of the influence factors of international trade flows based on the trade gravity model and the data of China´s empirical
725
Analysis of the Influence Factors to Remote Replication System
726
Analysis of the influence of asynchronous generator rotor parameters on wind turbine operating characteristics
727
Analysis of the influence of baffles and shields on the cooling of a digital transmission equipment
728
Analysis of the Influence of Concrete Mixed with MgO on the Mass Concrete Thermal Stress
729
Analysis of the Influence of Control Parameters on Wind Farm Output: a Sensitivity Analysis using ANN Modelling
730
Analysis of the influence of dark current on the performance of optical receivers employing superlattice APDs
731
Analysis of the influence of dark current on the performance of optical receivers employing superlattice APDs
732
Analysis of the influence of Deep Waterway Project on morphological evolution in the North Passage of the Changjiang Estuary, China
733
Analysis of the Influence of Different Resolutions on Radio Propagation Models at 900 and 1800 MHz
734
Analysis of the influence of diode reverse recovery on the operation and design of high-frequency rectifiers
735
Analysis of the influence of EEG arousals from nocturnal sleep on heart rate
736
Analysis of the influence of electrical installations nodes on digital signals transmission conditions
737
Analysis of the Influence of External Refractive Index on Long-Period Fiber Grating Coupler
738
Analysis of the influence of grounding material´s property on the performance of grounding grids
739
Analysis of the Influence of Group Members Arrangement on the Multicast Tree Cost
740
Analysis of the influence of intermittent faults in a microcontroller
741
Analysis of the Influence of Layout and Technology Parameters on the Thermal Impedance of GaAs HBT/BiFET Using a Highly-Efficient Tool
742
Analysis of the influence of lift-off variation on Eddy-Current images
743
Analysis of the influence of load to islanding passive detection method
744
Analysis of the influence of MOS device geometry on predicted SEU cross sections
745
Analysis of the influence of multiple scattering on the reconstruction of ultrasound tomography signals using Synthetic Aperture Focussing Technique
746
Analysis of the influence of multiservice users´ mobility on UMTS-FDD performance
747
Analysis of the influence of NESZ variations on cross-polarized signatures of sea ice
748
Analysis of the influence of network on the Chinese youth and countermeasures
749
Analysis of the influence of observation starting time on FFT-based phase estimation of sinusoid
750
Analysis of the influence of OFDM sidelobe interference on Femto rich systems
751
Analysis of the influence of organisational and inter-organisational factors on the implementation of Green Supply Chain Management practices
752
Analysis of the influence of parasitic parameters on planar transformers
753
Analysis of the influence of parasympathetic postganglionic neurons on cardiac response in Ventricular Fibrillation
754
Analysis of the influence of photovoltaic sources integrated into distribution network in different ways
755
Analysis of the influence of power system structure on the Central China Grid’s small- signal stability
756
Analysis of the influence of processor hidden registers on the accuracy of fault injection techniques
757
Analysis of the influence of quantization error at sensor autocalibration
758
Analysis of the influence of radio beacon placement on the accuracy of indoor positioning system
759
Analysis of the influence of random disturbances on Turing patterns in growing domains
760
Analysis of the influence of register file size on energy consumption, code size, and execution time
761
Analysis of the influence of rotor material on IMCCR temperature field
762
Analysis of the influence of soil resistivity on lightning radiation magnetic field
763
Analysis of the Influence of Some Parameters in Quartz Bulk Resonators
764
Analysis of the influence of SOP lead shape on solder joint reliability
765
Analysis of the influence of specific humidity on positive streamer predischarges considering h/δ greater than 15 g/m
3
766
Analysis of the Influence of Substrate on the Performance of On-Chip MOS Decoupling Capacitors
767
Analysis of the Influence of the Barn Duct Design on Control Techniques of Pests in Stored Grain
768
Analysis of the Influence of the Cell Geometry and Cell Proximity Effects on the Single-cell Trapping using Light-induced Dielectrophoresis
769
Analysis of the Influence of the Compiler on Multicore Performance
770
Analysis of the influence of the empennage to the radiation pattern of airborne antenna array by the GTD method
771
Analysis of the Influence of the Field of View on a Crowd Simulation Model Based on Synthetic Vision
772
Analysis of the influence of the FM non-linearity on the range resolution of LFMCW radar
773
Analysis of the influence of the ground to TEM horn antennas for pulse radiation with parallel FDTD method
774
Analysis of the influence of the level of signal distortion on current error and phase displacement of the inductive current transformers
775
Analysis of the influence of the particle surface area (PSA) for optical wireless links under fog conditions
776
Analysis of the influence of the position of the mobile on SAR induced using polynomial chaos decomposition
777
Analysis of the influence of the power control and discontinuous transmission on RF exposure with GSM mobile phones
778
Analysis of the influence of the resistance for Taiwan´s native trees fumed by sulfur dioxide gas
779
Analysis of the influence of the sequence spectrum bandwidth on the dispersion limited propagation length
780
Analysis of the influence of transmission congestion on power market based on LMP-lossless model
781
Analysis of the influence of Walsh-Hadamard code allocation strategies on the performance of multi-carrier CDMA systems in the presence of HPA non-linearities
782
Analysis of the influence of water body on polarimetric sar calibration
783
Analysis of the influence of weather factors on outages in Spanish distribution networks
784
Analysis of the Influence on Power Losses by Converter Control Mode
785
Analysis of the influence on the time-of-use price associated with the load-move-cost
786
Analysis of the Influence Prior Coordinates and Design Points Translation to the Accuracy of GPS Control Network
787
Analysis of the influence to fault detecting of DC system from distributed capacitance
788
Analysis of the influence to productivity of software corrective maintenance using an economic model
789
Analysis of the Influences and Countermeasures of Green Trade Barrier on Export Trade of Chinese Agricultural Products
790
Analysis of the influences from battery impedance on Behaviors of Switched Reluctance Drive
791
Analysis of the Influences of Demurrage on Yard Utilization in Container Terminal
792
Analysis of the Influences of Polarization-dependent Nonlinear Gain and Nonlinear Polarization Rotation on Optical Sampling in Semiconductor Optical Amplifier
793
Analysis of the influences of solar panels on antenna far-field measurement
794
Analysis of the influencing factors for the 500 kV DC voltage reference divider used for on-site calibration
795
Analysis of the Influencing Factors of Elective Surgery Cancellation
796
Analysis of the influential factors of service recovery satisfaction in telecommunications industry
797
Analysis of the Information Behavior of Cluster Users in Teachers´ Professional Development Virtual Community
798
Analysis of the information contained in amplitudes of the reflected signals received by space diversity radars
799
Analysis of the information flow control model in the supply chain
800
Analysis of the infrared images to detect power lines
801
Analysis of the infrared sensitivity of a quartz resonator application as a thermal sensor
802
Analysis of the Initial Values in Split-Complex Backpropagation Algorithm
803
Analysis of the initiation and evolution of the strong convective cloud: A case study in SUWAN area
804
Analysis of the injection moulding process of soft magnetic plastics compounds
805
Analysis of the input noise contribution in the noise temperature measurements
806
Analysis of the InSAR flattening errors and their influence on DEM reconstruction
807
Analysis of the Inset Dielectric Guide Iris Discontinuity
808
Analysis of the instability modes caused by the UHV interconnection
809
Analysis of the Instability of Evaporating Charged Liquid Drops
810
Analysis of the instability of PFC power supplies with various AC sources
811
Analysis of the instantaneous phase signal of a fMRI time series via the Hilbert transform
812
Analysis of the Instantaneous Power Flow for Three-Phase PWM Boost Rectifier Under Unbalanced Supply Voltage Conditions
813
Analysis of the institutional dilemma of innovation function in Chinese universities and reform measures
814
Analysis of the insulated base MOS-controlled thyristor structure (IBMCT)
815
Analysis of the insulated power-grid transient behavior after faulted phase tripping
816
Analysis of the insulation characteristics of C
3
F
8
gas mixtures with N
2
and CO
2
using boltzmann equation method
817
Analysis of the insulation material degradation process in correlation to the temporal course of the partial discharge phenomena at high frequent voltage stress
818
Analysis of the integration of Blackboard digital platform, in the School of Accounting and Administration Tijuana, UABC
819
Analysis of the integration of envelope tracking with Continuous Class F amplifiers
820
Analysis of the integration of IEEE 802.11e capabilities in battery limited mobile devices
821
Analysis of the integration of WiMAX and cellular networks
822
Analysis of the integration of wind generation into the Irish System
823
Analysis of the Integrity of the Microwave Landing System (MLS) Data Eu nctions
824
Analysis of the intellectual structure and evolution of technology roadmapping literature
825
Analysis of the intensity noise of nearly single-longitudinal-mode semiconductor lasers
826
Analysis of the interaction between a layered spherical human head model and a finite-length dipole
827
Analysis of the interaction between a layered spherical human head model and a helical dipole
828
Analysis of the interaction between a layered spherical human head model and a helical dipole antenna
829
Analysis of the interaction between digital art and traditional art
830
Analysis of the interaction between image and music focused on physical features
831
Analysis of the interaction between linear cyclic error correcting codes and self-synchronous payload scramblers
832
Analysis of the interaction between TCP variants and routing protocols in MANETs
833
Analysis Of The Interaction Between The Sympathetic And Chemical Mechanisms In Cerebral Blood Flow Regulation
834
Analysis of the interaction development between industrial clusters and logistics parks
835
Analysis of the Interaction of Aerosol Transport Layers on Local Air Quality
836
Analysis of the interaction of free and bound microplasmas
837
Analysis of the interaction of surface acoustic waves with charge carriers in layered structures
838
Analysis of the Interactions between the N-Terminal Peptide of gp41 and T20 Using Molecular Dynamics and Free Energy Calculations
839
Analysis of the inter-area low frequency oscillations in large scale power systems
840
Analysis of the inter-area mode oscillations using normal form method
841
Analysis of the inter-area mode phenomenon in power systems following large disturbances
842
Analysis of the inter-area mode phenomenon in power systems following large disturbances
843
Analysis of the interface barriers between nano metal particles and semiconductors substrates
844
Analysis of the interfaces of stacked Josephson junctions by atomic force microscopy
845
Analysis of the interference between IEEE 802.11b and Bluetooth systems
846
Analysis of the interference coupling in electrical powertrains for transportation systems
847
Analysis of the interference due to differential rain attenuation induced by an adjacent path on a multiple site diversity Earth-space system
848
Analysis of the interference due to differential rain attenuation induced by an adjacent path on a triple-site diversity Earth-space system
849
Analysis of the interference due to differential rain attenuation induced by an adjacent terrestrial microwave system on a dual site diversity Earth-space system
850
Analysis of the Interference Environment Generated by Mobile Earth Stations Operating in Frequency Bands Shared with the Fixed Service
851
Analysis of the interference from LTE system in ISDB-TB Digital TV system at 700 MHz
852
Analysis of the interference of moisture on ethylene hormone detection with a palladium complex
853
Analysis of the interference on a dual polarized earth-space path due to differential rain attenuation from an adjacent satellite system
854
Analysis of the Interference Potential of a Candidate UHF-LPTV Facility
855
Analysis of the interference signal arising from the transmission of a pulse sequence through a monomode fibre
856
Analysis of the interharmonics generated by a ship propulsion system
857
Analysis of the interleaved APWM converter with less power switches
858
Analysis of the Interleaved Isolated Boost Converter With Coupled Inductors
859
Analysis of the interleaved type power factor correction (PFC) converter in discontinuous current mode
860
Analysis of the intermodulation distortion and nonlinearity of common-base SiGeC HBTs.
861
Analysis of the Internal Noise of Quartz-Crystal Oscillators
862
Analysis of the internal quantum efficiency of β-FeSi
2
light-emitting diode
863
Analysis of the internal scattering field distribution in an oversized rectangular slotted waveguide
864
Analysis of the Internal Stability of Two Different Control Implementations of the Phase-Shifted Full-Bridge Resonant Converter
865
Analysis of the International Space Station multipath and masking environment for Automated Transfer Vehicle Relative GPS rendezvous manoeuvres
866
Analysis of the Internet Key Exchange protocol using the NRL Protocol Analyzer
867
Analysis of the internet using behavior of adolescents by using data mining technique
868
Analysis of the interpolation error between multiresolution images
869
Analysis of the Interruption Process of Molded Case Circuit Breakers
870
Analysis of the Interruption Process of Selective Miniature Circuit Breaker With Permanent Magnet Release
871
Analysis of the intrinsic characteristics of the partial discharge induced by typical defects in GIS
872
Analysis of the intrinsic spatial resolution for the Stockholm University Karolinska Hospital cylindrical SPECT camera
873
Analysis of the intrinsic transient fault tolerance of a signal and image processing algorithm implemented on a DSP
874
Analysis of the introduction of large scale wind energy into the greek electricity system
875
Analysis of the Introduction of Testability Antipatterns during the Development Process
876
Analysis of the introduction to the computer programming education by the SIEM assessment standard
877
Analysis of the inverse kinematics problem for 3-DOF axis-symmetric parallel manipulators with parasitic motion
878
analysis of the inverse problem in magnetopneumogram by magnetic noise elimination using a spatial filter
879
Analysis of the inverted-F antennas integrated on the displacement detector for wireless sensor network applications
880
Analysis of the Ion Spot Phenomenon on Beam-Charged Dielectrics
881
Analysis of the ionized field associated with a bundled DC line including effect of wind
882
Analysis of the Ionized Field Under HVDC Transmission Lines in the Presence of Wind Based on Upstream Finite Element Method
883
Analysis of the IPSec key exchange standard
884
Analysis of the IPv4 Address Space Delegation Structure
885
Analysis of the iron loss of line start permanent magnet synchronous motor using time-stepping finite element method
886
Analysis of the irreversible processes of magnetization in steel
887
Analysis of the ISBSG software repository from the ISO 9126 view of software product quality
888
Analysis of the Ishimaru parabolic equation: the Languerre invariance of the output time impulses shape
889
Analysis of the islets-based glucose control system involving the nonlinear glucose-insulin metabolism model
890
Analysis of the Isolated Induction Generator
891
Analysis of the Isolated Induction Generator
892
Analysis of the Italian distribution system evolution through reference networks
893
Analysis of the Italian Tweet Political Sentiment in 2014 European Elections
894
Analysis of the ITER
SULTAN Sample Test Conditions With Different Joint Technologies
895
Analysis of the ITER Central Solenoid (CS) by the US Participant Team (PT)
896
Analysis of the ITER superconducting coils: magnetic field, AC losses and cooling
897
Analysis of the ITER TF Winding Pack During Cold Tests at Reduced Current
898
Analysis of the iterative decoding of LDPC and product codes using the Gaussian approximation
899
Analysis of the iterative decoding of product codes using the Gaussian approximation
900
Analysis of the iterative Kirchhoff approximation for rough surface scattering
901
Analysis of the Jensen´s model, the Frandsen´s model and their Gaussian variations
902
Analysis of the joint network LDPC codes over orthogonal multi-access relay channel
903
Analysis of the joint probability density function of the inventory in a two machine two buffer transfer line with unreliable machines
904
Analysis of the jointly adapting and asynchronously configured V.32 modem implementation
905
Analysis of the jump and approximate gradient for solutions of Mumford-Shah type energy functionals
906
Analysis of the junction between smooth and corrugated cylindrical waveguides in mode converters
907
Analysis of the Junction Properties of C/GaSe
0.5
S
0.5
/C Back-to-Back Schottky-Type Photodetectors
908
Analysis of the Key Agreement Scheme of ZigBee Standard
909
Analysis of the Key Factors for Software Quality in Crowdsourcing Development: An Empirical Study on TopCoder.com
910
Analysis of the key influencing factors of the food industrial enterprises´ integrity & credit in China based on DEMATEL method
911
Analysis of the key techniques in hydro-generator with inner evaporative cooling
912
Analysis of the key technologies in software radios networking
913
Analysis of the key technology of airborne antenna and feed equipment under complicated conditions
914
Analysis of the key technology of smart distribution park
915
Analysis of the key technology on cloud storage
916
Analysis of the keyframe animation and motion capture case studies
917
Analysis of the kinematics of module climbing caterpillar robots
918
Analysis of the kink effect in MOS transistors
919
Analysis of the Kirk effect in silicon-based bipolar transistors with a nonuniform collector profile
920
Analysis of the KK-distribution with medium grazing angle sea-clutter
921
Analysis of the KK-distribution with X-band medium grazing angle sea-clutter
922
Analysis of the knot-tying force in dog models
923
Analysis of the knowledge network formation process
924
Analysis of the KSTAR Central Solenoid Model Coil Experiment
925
Analysis of the Labor Conflict of Transnational Corporations under Globalization
926
Analysis of the Lactose metabolism in E. coli using sum-of-squares decomposition
927
Analysis of the LAD Methods
928
Analysis of the lagrange multipliers method using the technique of analytical integration applied to waveguides
929
Analysis of the Lake Spatio-Temporal Change in Naqu of Tibet during Last Thirty Years
930
Analysis of the land degradation pattern in Zoige Plateau Marsh Wetland Based on MODIS data
931
Analysis of the landscape pattern in eastern edge of Pearl River Delta based on the Object-oriented classification method: A case study of Huicheng District, Huizhou City
932
Analysis of the large-signal characteristics of power heterojunction bipolar transistors exhibiting self-heating effects
933
Analysis of the Large-Signal Circuit Model for Quantum Cascade Laser
934
Analysis of the laser phase noise conversion by an atomic vapor
935
Analysis of the laser transmission rate of silicon (Si) applied to flip-chip bonding
936
Analysis of the latch and breakdown phenomena in N and P channel thin film SOI MOSFET´s as a function of temperature
937
Analysis of the Latch and Breakdown Phenomena in Thin Film Soi Mosfet´s As a Function of Temperature
938
Analysis of the Latch Phenomenon in Thin Film Soi MOSFET´s as a Function of Temperature
939
Analysis of the latch-up process and current filamentation in high-voltage trench-IGBT cell arrays
940
Analysis of the latency of SIP phone based on the embedded system
941
Analysis of the latency-lifetime tradeoff in wireless sensor networks
942
Analysis of the lateral insulated gate transistor
943
Analysis of the launching performance under melting restriction for electromagnetic launcher
944
Analysis of the LCDCM criterion for DS-CDMA blind multiuser detection
945
Analysis of the leakage current on polluted insulators using correlation coefficient
946
Analysis of the leakage current pulses of outdoor insulators in different relative humidity
947
Analysis of the leakage effect in a pipelined ADC with nanoscale CMOS technologies
948
Analysis of the leakage inductance of planar transformer
949
Analysis of the leaky bucket algorithm for on-off data sources
950
Analysis of the leaky surface acoustic wave radiation in YX-LiTaO
3
for symmetric and non-symmetric IDTs
951
Analysis of the leaning limit dynamics of Powered Two Wheeled vehicles
952
Analysis of the learning model for KYDON system
953
Analysis of the least median of squares estimator for computer vision applications
954
Analysis of the left-handed corrugated circular waveguide
955
Analysis of the Level Crossing Rates for Ordered Random Processes
956
Analysis of the levels of risk found in biomedical equipment in two healthcare institutions of high complexity
957
Analysis of the life cycle cost and intelligent investment benefit of smart substation
958
Analysis of the Life Cycle Cost of the Power Plants Based on Analytic Hierarchy Process Method
959
Analysis of the life cycle trend of the export market of Taiwanese bicycle industry
960
Analysis of the Lifetime of Large Wireless Sensor Networks
961
Analysis of the lifetime of wireless sensor networks for underground communications in dry sand
962
Analysis of the Liftoff Effect of Phase Spectra for Eddy Current Sensors
963
Analysis of the Lift-off Effect of Phase Spectra for Eddy Current Sensors
964
Analysis of the light dependent resistor configuration for line tracking robot application
965
Analysis of the Light Emission Signals Based on Autocorrelation Function Calculation
966
Analysis of the light shift effect in the /sup 87/Rb frequency standard
967
Analysis of the light shift effect in the
87
Rb frequency standard
968
Analysis of the lighting position system based on corridor radius algorithm
969
Analysis of the Lightning Attractive Radius of Power Transmission Lines through the Use of a Physically-Oriented Model
970
Analysis of the lightning behavior of an earthing system including ionization via the cell method
971
Analysis of the lightning disaster characteristics of heritage buildings
972
Analysis of the Lightning Performance of Overhead Distribution Lines
973
Analysis of the lightning waveshape
974
Analysis of the limit cycles in the PI control of IPD processes with send-on-delta sampling
975
Analysis of the limit to superresolution in real aperture scanning radar
976
Analysis of the limitations imposed by passive optical components on the free-space optical interconnections between dilute arrays of smart pixels
977
Analysis of the limitations of coherent polarimetric decompositions on vessel classification using simulated images
978
Analysis of the limitations of conventional direct thrust control scheme for linear permanent magnet synchronous motors
979
Analysis of the limitations of WiFi communications managed by the IEEE 802.11 protocol in data transmission in automated power distribution systems
980
Analysis of the Limiter Material Erosion in T-3M Tokamak
981
Analysis of the Limits of Graph-Based Object Duplicate Detection
982
Analysis of the Linear AC Servo Control for Short Stroke Precision Stage
983
Analysis of the linear acceleration measurement methods
984
Analysis of the linear amplifier/analog-digital converter interface in a digital microwave receiver
985
Analysis of the linear and nonlinear time response of a P-i-N photodiode by a two-valley model
986
Analysis of the linear DC motor for the automatic door system
987
Analysis of the linear SIC for DS/CDMA signals with random spreading
988
Analysis of the linearity of pipelined ADC due to capacitor non-linearity
989
Analysis of the Line-Frequency Electric Field Intensity around EHV Transmission
990
Analysis of the Liner Stability in Various Experiments
991
Analysis of the Liner Stability in Various Experiments
992
Analysis of the linewidth of a grating-feedback GaAlAs laser
993
Analysis of the Linewidth-Enhancement Factor of Long-Wavelength Tunnel-Injection Quantum-Dot Lasers
994
Analysis of the link error monitoring algorithms in the Signaling System Number 7 protocol
995
Analysis of the link error monitoring protocols in the common channel signaling network
996
Analysis of the Linux 2.6 kernel scheduler
997
Analysis of the Linux Kernel Evolution Using Code Clone Coverage
998
Analysis of the Linux random number generator
999
Analysis of the lithium battery charge/discharge system using state space averaging method
1000
Analysis of the liver in CT images using an improved region growing technique
