بر اساس عنوان

1
Comparison of doubly resonant, singly resonant and non resonant sum frequency mixing of two continuous wave lasers
2
Comparison of doubly salient permanent magnet machines with E-shaped and π-shaped stator iron core segments
3
Comparison of Doubly Salient Permanent Magnet Motor Performance for Parallel Sided and Tapered Rotor Poles
4
Comparison of downlink and uplink MC-CDMA sensitivity to phase jitter modeling
5
Comparison of downlink and uplink MC-DS-CDMA sensitivity to carrier frequency offsets
6
Comparison of downlink mobile positioning methods for the UMTS FDD mode without using IPDL periods
7
Comparison of downlink multi-user multiple input multiple output schemes in wireless communication systems
8
Comparison of Downlink Throughput Distributions between Frequency Reuse Factors of One and Three in MBWA System Field Trial
9
Comparison of downlink transmit diversity schemes for RAKE and SINR maximizing receivers
10
Comparison of downstream transmitters for high loss budget of long-reach 10G-PON
11
Comparison of DPCA and STAP for space-based radar
12
Comparison of DPS and PS systems according to DPS weights
13
Comparison of DPSK and MSK bit error rates for K and Rayleigh-lognormal fading distributions
14
Comparison of DPSK and OOK modulation format in 160 Gbit/s transmission system
15
Comparison of DQDB +/- and DQDB IEEE 802.6 protocols
16
Comparison of DQDB and FDDI MAC access protocols
17
Comparison of DRA and AFSR performances for Ku band Rx antennas
18
Comparison of drain structures in n-channel MOSFET´s
19
Comparison of DRAM capacitor dielectric by stored charge and holding time using TQV chart
20
Comparison of DRAM Cells in the Simulation of Soft Error Rates
21
Comparison of Drive Patterns for Single Current Source EIT in Computational Phantom
22
Comparison of drive performance of PM synchronous machine fed by inverters with different PWM strategies in constant torque and constant power regions
23
Comparison of driver behaviour and saturation flow in china and the netherlands
24
Comparison of driver models for the computer-aided analysis of electronic packages
25
Comparison of driving characteristics in two kind of control schemes for permanent magnet synchronous motor mounted on electric vehicle
26
Comparison of drop casting vs. spray pyrolysis MWCNTs technique for surface modification based interdigitated electrode
27
Comparison of dry etch techniques for GaN
28
Comparison of Dry Snow Emission Model and the Primary Study on Satellite Data Simulation
29
Comparison of DSB and SSB transmission for OFDM-PON
30
Comparison of DSB and SSB transmission for OFDM-PON [Invited]
31
Comparison of DSC and TSDC investigations: α relaxation in polymers
32
Comparison of DS-CDMA and MC-CDMA techniques for dual-dispersive fading acoustic communication networks
33
Comparison of DSF- and SOA-based phase conjugators employing noise-suppressing fiber
34
Comparison of DSP and FPGA realization of neural speed estimator for 2-mass system
35
Comparison of DSP boards for classroom use
36
Comparison of DSP equalizer complexity between strongly and weakly coupled few mode fiber transmission systems
37
Comparison of DSR and DYMO routing protocols in building environments
38
Comparison of DSR, AODV, and DSDV Routing Protocols with Varying Pause Time & Node Density over TCP & CBR Connections in VANET
39
Comparison of DSV, BSV and TSV spin valves in CPP geometry
40
Comparison of D-SVC and D-STATCOM for performance enhancement of the distribution networks connected WECS including voltage dependent load models
41
Comparison of DTC and FOC for FSTP inverter fed IPMSM drives
42
Comparison of DTC implementations for synchronous machines
43
Comparison of DTFC and vector control techniques for PMSM drive with loss minimization approach
44
Comparison of DTN Routing Protocols in Realistic Scenario
45
Comparison of DTW and HMM for isolated word recognition
46
Comparison of DTW score and warping path for text dependent speaker verification system
47
Comparison of dual and full polarimetric entropy/alpha decompositions with TerraSAR-X, suitability for use in classification
48
Comparison of dual- and triple-head hybrid PET systems using estimation task performance
49
Comparison of dual rail and an enhanced bundled data asynchronous protocols noise robustness in the GALS NoC link application
50
Comparison of Dual Z-Source inverter and DC-DC boosted PWM inverter for aircraft power generation system
51
Comparison of Dual Z-Source inverter and PWM voltage source inverter for aircraft power generation system
52
Comparison of dual Z-source inverter and traditional PWM inverters for aircraft power generation system
53
Comparison of dual Z-source inverter and traditional PWM inverters for aircraft power generation system
54
Comparison of Dual-Buck Full-Bridge Inverter with Different Inductor Structures
55
Comparison of dual-converter-based power supply systems
56
Comparison of dual-kVp and dual-layer CT in simulations and real CT system measurements
57
Comparison of Dual-Rail and TMR Logic Cost Effectiveness and Suitability for FPGAs With Reconfigurable SEU Tolerance
58
Comparison of Dual-Vt Configurations of SRAM Cell Considering Process-Induced Vt Variations
59
Comparison of dual-window scatter correction and effective attenuation coefficients for quantification in dedicated breast SPECT
60
Comparison of duobinary and 4-level continuous phase frequency shift keying signals for narrowband land mobile radio applications
61
Comparison of duplex and triplex memory reliability
62
Comparison of duty cycle measurement techniques of 802.11b/g in the frequency and time domain
63
Comparison of duty ratio perturbation & observation and reference voltage perturbation & observation methods applied in MPPT
64
Comparison of duty-cycle effects at room temperature in SiON and HfO2 gate PMOS FETS
65
Comparison of DVB-H Link Layer FEC Decoding Strategies in a Mobile Fading Channel
66
Comparison of DVB-T/H and DVB-T2 in mobile, portable and fixed TV channels
67
Comparison of DVR performance with Sinusoidal and Space Vector PWM techniques
68
Comparison of DWDM network topologies with bit-rate adaptive optical OFDM regarding restoration
69
Comparison of dynamic and static load-balancing strategies in heterogeneous distributed systems
70
Comparison of dynamic and static mechanical stress applied on soldered joints
71
Comparison of dynamic and static operation of a novel optical read-out technology for micromachined cantilever sensors
72
Comparison of dynamic channel allocation schemes in downlink in UTRA TDD
73
Comparison of dynamic feature map models for environmental monitoring
74
Comparison of dynamic fluctuation in drain current with static variability using N-MOSFETs with poly-Si/SiO2 gate stack structures
75
Comparison of dynamic inversion and LPV tailless flight control law designs
76
Comparison of dynamic load modeling using neural network and traditional method
77
Comparison of Dynamic Loadlines of CE and CB SiGe HBTs under Equivalent Bias Conditions
78
Comparison of dynamic model selection with infinite HMM for statistical model change detection
79
Comparison of dynamic multicast routing algorithms for wide-area packet switched (asynchronous transfer mode) networks
80
Comparison of dynamic performance of laterally loaded hollow pile with solid pile
81
Comparison of dynamic performance of meshed networks with different types of HVDC lines
82
Comparison of Dynamic Performance of Single- and Multijunction Solar Cells
83
Comparison of dynamic performances of speed control system containing time - minimal speed controller with control system containing PI speed controller
84
Comparison of dynamic programming and evolutionary algorithms for RNA secondary structure prediction
85
Comparison of dynamic range properties of high-order active bandpass filters
86
Comparison of dynamic resistance arc furnace models for flicker study
87
Comparison of Dynamic Response of Functionalized and Bare MWNT Sensors
88
Comparison of dynamic responses for IPM and SPM motors by considering mechanical and magnetic coupling
89
Comparison of dynamic responses of dual and single rotor wind turbines under transient conditions
90
Comparison of dynamic restorer topologies
91
Comparison of Dynamic Trust Management Model in Cloud Computing
92
Comparison of dynamic voltage restorer and static synchronous series compensator for a wind turbine fed FSIG under asymmetric faults
93
Comparison of dynamical friction models on electromechanical positioning system
94
Comparison of dynamical properties of ground- and excited-state emission in quantum-dot lasers
95
Comparison of Dynamical Responses of an Offshore Riser with Linear and Nonlinear Structural Characteristics Through Nonlinear Normal Modes
96
Comparison of Dynamics of Different Injection Semiconductor Lasers with Phase- Conjugate Feedback Generating in near IR
97
Comparison of E and 1/E TDDB models for SiO/sub 2/ under long-term/low-field test conditions
98
Comparison of eager and quorum-based replication in a cloud environment
99
Comparison of Ear Recognition Robustness of Single-View-Based Images Rotated in Depth
100
Comparison of Early and Late Information Fusion for Multi-camera HOV Lane Enforcement
101
Comparison of Early Stopping Criteria for Neural-Network-Based Subpixel Classification
102
Comparison of early-stage design methods for a two-mode hybrid electric vehicle
103
Comparison of Earth Observing-1 ALI and Landsat ETM+ for crop identification and yield prediction in Mexico
104
Comparison of earth return approaches on modeling of underground cables
105
Comparison of EBG substrates with and without vias for GALILEO/GPS applications
106
Comparison of ECC and RSA algorithm in multipurpose smart card application
107
Comparison of ECC and RSA Algorithm in Resource Constrained Devices
108
Comparison of ECG derived respiratory signals and pneumatic bellows for respiratory motion tracking
109
Comparison of ECG-based clinical indexes during exercise test
110
Comparison of echo cancellation algorithms for the adaptive delay filter
111
Comparison of echo state network and extreme learning machine for PV power prediction
112
Comparison of echo suppression techniques in near field antenna measurement applications
113
Comparison of echolocation behaviour between coastal and riverine porpoises
114
Comparison of echo-power estimation using linearized video data and raw data for Dynamic Contrast-Enhanced Ultrasound
115
Comparison of ECL Gate Performances using Different Heterojunction Bipolar Transistors Process
116
Comparison of eco and time efficient routing of ICEVs, BEVs and PHEVs in inner city traffic
117
Comparison of economic impacts of safe and dangerous failure of safety system
118
Comparison of economic models for two differently configured uninterrupted power supply systems from user electricity bill perspective
119
Comparison of EDAC schemes for DDR memory in space applications
120
Comparison of EDFA and bidirectionally pumped Raman amplifier in a 40-Gb/s RZ transmission system
121
Comparison of edge detection algorithms using a structure from motion task
122
Comparison of edge detectors
123
Comparison of edge detectors using an object recognition task
124
Comparison of edge detectors: a methodology and initial study
125
Comparison of edge effects of transverse flux and travelling wave induction heating inductors
126
Comparison of edge-effects of transverse flux and travelling wave induction heating inductors
127
Comparison of EDLC impedance models used for ageing monitoring
128
Comparison of EEG and MEG in source localization of induced human gamma-band oscillations during visual stimulus
129
Comparison of EEG blind source separation techniques to improve the classification of P300 trials
130
Comparison of EEG Forward Solutions in Two Head Models
131
Comparison of EEG Pattern Classification Methods for Brain-Computer Interfaces
132
Comparison of effect of different ameliorants for aeolian sandy soil on growth of Chinese cabbage
133
Comparison of effective α-parameters for semiconductor Mach-Zehnder optical modulators
134
Comparison of effective /spl alpha/ parameters for multiquantum-well electroabsorption modulators
135
Comparison of Effective Direct and Converse Magnetoelectric Effects in Laminate Composites
136
Comparison of effective hough transform-based fingerprint alignment approaches
137
Comparison of effective linewidth and FMR linewidth at 10 GHz in Ho substituted YIG
138
Comparison of effective linewidth and FMR linewidth at 10 GHz in Ho substituted YIG
139
Comparison of effective noise temperatures in YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// junctions
140
Comparison of effective work function extraction methods using capacitance and current measurement techniques
141
Comparison of effectiveness of auxiliary signals incorporated in STATCOM for improving transient performance of power system
142
Comparison of effectiveness of Current Ratio and Delta-IDDQ tests
143
Comparison of effectiveness of gas sensing by low frequency fluctuations in resistance and microbalance quartz gas sensors
144
Comparison of effectiveness of various mother wavelet functions in the detection of actual 3-phase voltage sags
145
Comparison of effects between large-area-beam ELA and SPC on TFT characteristics
146
Comparison of effects from wafer backside films on temperature uniformity in dual side lamp heated production RTP systems
147
Comparison of effects of La, Mg and Rh addition on the activity and stability of Ni/SiO2 catalysts in dry reforming of methane at low temperature
148
Comparison of Effects of Overload on Parameters and Performance of Samarium-Cobalt and Strontium-Ferrite Radially Oriented Permanent Magnet Brushless DC Motors
149
Comparison of Effects of Overload on Parameters and Performance of Samarium-Cobalt and Strontium-Ferrite Radially Oriented Permanent Magnet Brushless DC Motors
150
Comparison of effects of tolerance and parasitic loss in components of resistively terminated LC ladder filters
151
Comparison of effects on the anti-metastasis between isoliquiritigenin and glabridin
152
Comparison of Effects on Volatile and Semi-volatile Organic Compounds in Water by Different Sampling Methods
153
Comparison of efficiencies of in situ induction motor in unbalanced field conditions
154
Comparison of efficiencies of interleaved boost converter for reenergy storage system
155
Comparison of efficiency and output power of optimal Er-doped superfluorescent fibre sources in different configurations
156
Comparison of efficiency for a PI and a FLC based IPMSM drive incorporating loss minimization algorithm over wide speed range
157
Comparison of efficiency in key entry among young, middle and elderly age groups - e ffects of aging and character size of a keyboard on work efficiency in an entry task -
158
Comparison of efficiency measurement techniques for electric vehicle traction inverters
159
Comparison of efficiency measurements for a HCPV module with 3J cells in 3 sites
160
Comparison of efficiency measurements for narrow band antennas using UWB Wheeler Cap and Reverberation Chamber
161
Comparison of Efficiency of N-Dimensional CAP Modulations
162
Comparison of efficiency of slot allocation by congestion pricing and ration by schedule
163
Comparison of efficiency of two dc-to-ac converters for grid connected solar applications
164
Comparison of Efficient Design Techniques for Surveillance Radars
165
Comparison of Efficient Global Optimization and Output Space Mapping on the Biobjective Optimization of a Safety Isolating Transformer
166
Comparison of efficient interpolation techniques for symbol timing recovery
167
Comparison of efficient power combining techniques
168
Comparison of efficient small antennas for wireless microsensors through simulation and experiment
169
Comparison of Effiective Target Width Calculation Methods for Pointing Task
170
Comparison of E-government strategy between Chinese and foreign nations: Content, model and characteristics
171
Comparison of eigenface-based feature vectors under different impairments
172
Comparison of eigenvalues for second order equations on time scales
173
Comparison of Eigenvector and Gram-Schmidt Signal Separation Techniques
174
Comparison of eigenvector-based pattern recognition algorithms for hybrid systems
175
Comparison of EKF and PEKF in a SLAM context
176
Comparison of EKF- and PF-based methods in tracking maneuvering targets
177
Comparison of EKF and UKF for Spacecraft Localization via Angle Measurements
178
Comparison of elastic implementations for WDM networks
179
Comparison of elastic matching algorithms for online Tamil handwritten character recognition
180
Comparison of electric- and magnetic- cardiograms produced by myocardial ischemia in models of the human ventricle and torso
181
Comparison of electric and magnetic fields from electric power systems with exposure recommendations of the European Union
182
Comparison of electric and magnetic fields near 400 kV electric substation with exposure recommendations of the European Union
183
Comparison of electric field and charge density distributions using the Kerr electro-optic method with blade-plane and point-plane electrodes
184
Comparison of electric field and priming particle effects on address discharge time lag and addressing Characteristics of high-Xe content AC PDP
185
Comparison of electric field and priming particle effects on address discharge time lag in AC PDP and addressing characteristics of high Xe contents panel
186
Comparison of electric field dependent activation energy for electroformation in TaOx and TiOx based RRAMs
187
Comparison of electric field strength at VHF frequencies generated by dipoles and TEM cells
188
Comparison of electric fields induced in humans and rodents by 60-Hz contact currents
189
Comparison of electric motor types for realising an energy efficient pumping system
190
Comparison of electrical “engineering” of Heaviside´s times and software “engineering” of our times
191
Comparison of electrical aging tests on EPR-insulated minicables and ribbons from full-sized EPR cable
192
Comparison of electrical and electromagnetic properties of a planar inductor
193
Comparison of electrical and optical interconnect
194
Comparison of electrical and optical properties of Al/SiO2/n-GaN and ITO/SiO2/n-GaN metal-oxide-semiconductor photodetectors
195
Comparison of electrical and reliability characteristics of different 14 /spl Aring/ oxynitride gate dielectrics
196
Comparison of electrical and reliability characteristics of different tunnel oxides in SONOS flash memory
197
Comparison of electrical and SEM CD measurements on binary and alternating aperture phase-shifting masks
198
Comparison of electrical battery models using a numerically optimized parameterization method
199
Comparison of electrical capacitance tomography sensors with internal-external electrodes
200
Comparison of electrical characteristics of back- and top-gate Si nanowire field-effect transistors
201
Comparison of electrical characteristics of barbed-plate and wire-plate precipitators
202
Comparison of electrical characteristics of N-type silicon junctionless transistors with and without film profile engineering by TCAD simulation
203
Comparison of electrical discharge techniques for nonthermal plasma processing of NO in N2
204
Comparison of electrical drive technologies for aircraft flight control surface actuation
205
Comparison of electrical drives for road vehicles
206
Comparison of electrical environmental characteristics of different EHV transmission lines
207
Comparison of Electrical Generators used for Wind Power Generation
208
Comparison of electrical imaging algorithms by optics tool
209
Comparison of electrical impedance tomography reconstruction techniques applied to IMPETOM system
210
Comparison of electrical machine types in hybrid drive trains: Induction machine vs. permanent magnet synchronous machine
211
Comparison of electrical parameters of human body parts with vegetation
212
Comparison of electrical performance of enhanced BGA´s
213
Comparison of electrical performance of enhanced BGAs
214
Comparison of electrical performances of metal-insulator-metal capacitors with sputtered HfO2 and BZT-HfO2 dielectrics
215
Comparison of electrical physical and mechanical properties of textile composites using microwave nondestructive evaluation
216
Comparison of electrical profiles from hot and cold implantations of zinc ions into GaAs
217
Comparison of Electrical Properties and Bias Stability of Double-Gate a-HIZO TFTs According to TFT Structure
218
Comparison of electrical properties of SOS and ISE SOI transistors
219
Comparison of electrical techniques for temperature evaluation in power MOS transistors
220
Comparison of electrical transients and corrosion responses of pulsed 316LVM and MP35N electrodes
221
Comparison of electrical, optical and plasmonic on-chip interconnects based on delay and energy considerations
222
Comparison of electrical, thermal, and optical characteristics of high-power LEDs operating in various spectral ranges: From UV to green
223
Comparison of electrically excited and interior permanent magnet machines for hybrid electric vehicle application
224
Comparison of electrically-evoked ganglion cell responses in normal and degenerate retina
225
Comparison of electrochromic properties of NiO films prepared by chemical bath deposition and spin coating
226
Comparison of electrogram organization and synchronization indices in atrial fibrillation: A simulation study
227
Comparison of electroluminescence of different high voltage cable materials under identical experimental conditions
228
Comparison of electroluminescence phenomenon in LDPE, PET and PEN under the application of high electrical stress
229
Comparison of electromagnetic absorber used in anechoic and semi-anechoic chambers for emissions and immunity testing of digital devices
230
Comparison of electromagnetic absorption characteristics in the head of adult and a children for 1800 MHz mobile phones
231
Comparison of Electromagnetic and Conventional Launchers Based on Mauser 30-mm MK 30-2 Barrels
232
Comparison of electromagnetic band gap (EBG) structures for specific absorption rate (SAR) reduction
233
Comparison of electromagnetic band-gap structures for microstrip antenna arrays on thin substrates
234
Comparison of electromagnetic compatibility of different PV inverter
235
Comparison of electromagnetic field distribution in vicinity of patch and slot antennas
236
Comparison of electromagnetic performance of 2- and 3-phase PM brushless AC machines for low speed applications
237
Comparison of electromagnetic performance of switched flux permanent magnet machines with mechanical flux adjusters
238
Comparison of electromagnetic performance on E-core axial field flux-switching permanent magnet machines
239
Comparison of electromagnetic performances of amorphous and nanocrystalline core-based high frequency transformers
240
Comparison of electromagnetic response of planar interdigital sensors: quality testing of pork meat
241
Comparison of electromagnetic side-channel energy available to the attacker from different computer systems
242
Comparison of electromagnetic solvers for the analysis of LTCC components
243
Comparison of electromagnetic torque ripple in square wave and sine wave permanent magnet motor drives
244
Comparison of Electromagnetic Vibrator and Impact Coding Source
245
Comparison of Electromagnetic Wave, Light Intensity and Electric Charge of PD on Crossed Magnet Wires under Repetitive Impulses
246
Comparison of electromigration behaviors of SnAg and SnCu solders
247
Comparison of electromigration for lead-free solder joints of Cu vs. Ni UBM flip chip structure
248
Comparison of electromigration performance for Pb-free solders and surface finishes with Ni UBM
249
Comparison of electromigration phenomenon between aluminum interconnection of various multilayered materials
250
Comparison of electromigration reliability of tungsten and aluminum vias under DC and time-varying current stressing
251
Comparison Of Electromyographic Phasic Activity In Human Cyclic Movement
252
Comparison of electromyography and mechanomyogram in control of prosthetic system in multiple limb positions
253
Comparison of electron and hole mobilities in multiple quantum well solar cells using a time-of-flight technique
254
Comparison of Electron and Hole Mobilities in Multiple-Quantum-Well Solar Cells Using a Time-of-Flight Technique
255
Comparison of electron density measurements by using a plasma absorption probe and a double Langmuir probe in inductively coupled plasmas
256
Comparison of electron density measurements in planar inductively coupled plasmas by microwave interferometer and Langmuir probe
257
Comparison of electron density profiles extracted from DIAS maps and ionosonde measurements at Nicosia during low solar activity
258
Comparison of electron device models based on operation-specific metrics
259
Comparison of electron emission properties of silicon coated carbon nanotubes in O2 atmosphere
260
Comparison of electronic characteristics and thermal resistance for HEMTs grown on GaAs and Si substrates
261
Comparison of electronic pre-compensation and post-compensation for cascaded optical filtering of 10 Gb/s NRZ-OOK signals
262
Comparison of Electronic Transport Parameter of CNT(10,10)/CNT(17,0) and CNT(5,5)/CNT(8,0) Carbon Nanotube Metal-Semiconductor On-Tube Heterojunction
263
Comparison of electronics-reliability assessment approaches
264
Comparison of electro-optic effect between stoichiometric and congruent LiNbO3
265
Comparison of Electrooptic Modulation Methods
266
Comparison of electrophysiologic data across diverse cardiac geometries
267
Comparison of electrophysiological spatial pattern changes in short-and long-term learning
268
Comparison of electroplated and hand painted cathodes on self magnetic pinch radiographic diode operation
269
Comparison of electroplated and hand painted cathodes on self magnetic pinch radiographic diode operation
270
Comparison of electroplated eutectic Bi/Sn and Pb/Sn solder bumps on various UBM systems
271
Comparison of electroplated eutectic Sn/Bi and Pb/Sn solder bumps on various UBM systems
272
Comparison of electroporation thresholds of cardiac cell membranes by rectangular and exponential pulses
273
Comparison of electrostatic and electromagnetic deflection in cathode-ray tubes. Radio Section meeting
274
Comparison of electrostatic and electromagnetic motors based on fabrication and performance criteria
275
Comparison of electrostatic and time dependent simulation codes for modeling a pulsed power gun
276
Comparison of electrostatic precipitator power supplies with low effects on the mains
277
Comparison of electrostatic wave energy levels in models of electron beam-plasma interactions
278
Comparison of element arrangements of a spherical conformal array
279
Comparison of elementary bipolar transistor degradations: Dose rate and combined experimental parameters effects
280
Comparison of Eleven Single-Round and Multiple PCR Assays Targeting IS6110, IS1081, RecA Intein and Pps1 Intein Gene for Detection of Mycobacterium Tuberculosis
281
Comparison of EM algorithm and particle swarm optimisation for local model network training
282
Comparison of EM solvers on a circularly polarized patch antenna
283
Comparison of EM-Based Algorithms for MIMO Channel Estimation
284
Comparison of Embedded System Design for Industrial Applications
285
Comparison of EMD and Complex EMD in Signal Processing
286
Comparison of EMD Based Image Fusion Methods
287
Comparison of Emerging Information Visualization Tools for Higher Education
288
Comparison of emerging manufacturing concepts
289
Comparison of EMI performance of PWM and resonant power converters
290
Comparison of EMI signatures to improve condition assessment of generator stator insulation
291
Comparison of EMI suppression performance for Dual-Bridge Series Resonant DC/DC converter based on several kinds of chaotic maps
292
Comparison of EMI/EMC/ESD Test Limits of ISRO, EURO and ALCATEL
293
Comparison of EML and DOT discriminator DLL multipath performance in GPS/GLONASS navigation receivers
294
Comparison of Empirical and Theoretical Computations of Velocity for a Cold Spray Nozzle
295
Comparison of Empirical Data from Two Honeynets and a Distributed Honeypot Network
296
Comparison of empirical models and deterministic models for the analysis of interference in indoor environments
297
Comparison of empirical propagation path loss models for fixed wireless access systems
298
Comparison of empirical propagation path loss models for mobile communications in the suburban area of Kuala Lumpur
299
Comparison of encapsulant curing with convection and microwave systems
300
Comparison of encoding techniques for transmission of image data obtained using compressed sensing in wireless sensor networks
301
Comparison of encoding/detection techniques for the reverse link of an MC-CDMA multiple access scheme
302
Comparison of Encryption Schemes as Used in Communication between SCADA Components
303
Comparison of end of line tests for serial production of electric motors in hybrid truck applications
304
Comparison of end/side scintillator readout with digital-SiPM for ToF PET
305
Comparison of end-system IPv6 protocol stacks
306
Comparison of end-to-end bandwidth measurement tools on the 10GigE TeraGrid backbone
307
Comparison of End-to-End Loss Differentiation Algorithms in Multi-hop Wireless Networks
308
Comparison of energy balance in summer and winter at Miyun station
309
Comparison of energy consumption between a mobile device and a collection of dedicated devices
310
Comparison of energy consumption for position controlled PMSM using various energy near-optimal control techniques
311
Comparison of energy consumption in cooperative range-free localization for wireless sensor network
312
Comparison of energy consumption in HVAC systems using simple ON-OFF, intelligent ON-OFF and optimal controllers
313
Comparison of energy consumption of integrated optical-wireless access networks
314
Comparison of energy consumption of SRM and IPMSM in automotive driving schedules
315
Comparison of energy detection using averaging and maximum values detection for dynamic spectrum access
316
Comparison of Energy Efficiency and Routing Packet Overhead in Single and Multi Path Routing Protocols over S-MAC for Wireless Sensor Network
317
Comparison of energy efficiency in PSTN and VoIP systems
318
Comparison of energy harvesting power management techniques and application
319
Comparison of energy losses in high-current 1700 V switches
320
Comparison of energy management control strategy based on wayside ESS for LRV application
321
Comparison of energy management strategies for a range extended electric city bus
322
Comparison of energy minimising algorithms for channel assignment in mobile radio networks
323
Comparison of energy minimization methods for 3-D brain tissue classification
324
Comparison of energy production and performance from flat-plate photovoltaic module technologies deployed at fixed tilt
325
Comparison of energy relaxation in one-dimensional thermionic and tunneling transistors
326
Comparison of energy resolution spectra of CdTe TIMEPIX detector working in photon counting and time-over-threshold mode
327
Comparison of energy spreads induced by a longitudinal wakefield in a cavity
328
Comparison of energy storage devices for diagnostic X-Ray Generator
329
Comparison of Energy Storage System Technologies and Configurations in a Wind Farm
330
Comparison of energy window choice and parameter implementation in dual energy window scatter correction performance in 3D PET
331
Comparison of energy yield data of fifteen PV module technologies operating in four different climates
332
Comparison of Energy Yield of Small Wind Turbines in Low Wind Speed Areas
333
Comparison of energy-based endpoint detectors for speech signal processing
334
Comparison of energy-efficiency in bits per joule on different downlink CoMP techniques
335
Comparison of energy-efficient sampling methods for WSNs in building automation scenarios
336
Comparison of engineering education in Switzerland and in the United Kingdom
337
Comparison of engineering options for seawater intrusion control at river mouths
338
Comparison of engineering results within domain specific languages regarding information contents and intersections
339
Comparison of engineering scenarios for N x 160 Gb/s WDM transmission systems
340
Comparison of English narrow focus production by L1 English, Beijing and Taiwan Mandarin speakers
341
Comparison of English versus Hindi Medium Students for Programming Abilities Acquired through Video-Based Instruction
342
Comparison of enhanced constructive layout optimization technique with Tabu-search and Particle Swarm Optimization methodologies
343
Comparison of enhanced device response and predicted X-ray dose enhancement effects on MOS oxides
344
Comparison of Enhanced Markov Models and Discrete Event Simulation: For Evaluation of Probabilistic Faults in Safety-Critical Real-Time Task Sets
345
Comparison of enhanced resolution images of Greenland from the ERS-1 and Seasat scatterometers
346
Comparison of Enhanced-PSO and Classical Optimization Methods: A Case Study for STATCOM Placement
347
Comparison of enhancement- and depletion-mode triple stacked power amplifiers in 0.5 µm AlGaAs/GaAs PHEMT technology
348
Comparison of enhancement/depletion inverter speed in bulk Si and SOI circuits
349
Comparison of ensemble decision tree methods for on-line identification of power system dynamic signature considering availability of PMU measurements
350
Comparison of Ensemble Techniques for Incremental Learning of New Concept Classes under Hostile Non-stationary Environments
351
Comparison of entropy and complexity measures for the assessment of depth of sedation
352
Comparison of entropy measures for estimating severity of obstructive sleep apnea from overnight pulse oximetry data
353
Comparison of entropy-based characterization of lightning strike maps using planar and spherical coordinates
354
Comparison of entropy-based regularity estimators: application to the fetal heart rate signal for the identification of fetal distress
355
Comparison of ENVISAT RA2 backscatter results over global land surface
356
Comparison of EO-1 Hyperion and airborne hyperspectral remote sensing data for geologic applications
357
Comparison of EO-1 Hyperion to AVIRIS for mapping forest composition in the Appalachian Mountains, USA
358
Comparison of EPWM architectures for Class E amplifiers in EER system
359
Comparison of equalisation strategies for multi-carrier CDMA
360
Comparison Of Equalization & Detection For Very High Density Magnetic Recording
361
Comparison of equalization algorithms for underwater acoustic channels
362
Comparison of equalization techniques for an MIMO MC-CDMA system
363
Comparison of equalization techniques in a wavelet packets based multicarrier modulation DS-CDMA system
364
Comparison of equivalent circuit model and MAFIA calculation for re-entrant and co-axial cavities
365
Comparison of equivalent precision dedicated FFT processors
366
Comparison of equivalent source match measurements of a 40 GHz power splitter using scalar and vector network analyzers
367
Comparison of ER and EFCI flow control schemes for ABR service in wide area networks
368
Comparison of Er/sup 3+/ absorption-emission properties in tellurite and ultra highly doped Al-silica fibers
369
Comparison of Erasure Tests with Diversity Reception for Noncoherent M-ary FSK Signaling
370
Comparison of Erasure-and-Error Decoding Schemes
371
Comparison of erbium amplifier measurement using a high power amplified spontaneous emission source or using an ITU grid
372
Comparison of e-readiness composite indicators
373
Comparison of Ergodic Capacities From Wideband MIMO Antenna Measurements in Reverberation Chamber and Anechoic Chamber
374
Comparison of error bounds for non-parametric dominant point detection
375
Comparison of error concealment strategies for MPEG video
376
Comparison Of Error Detection Techniques Using Software-based Fault Injection
377
Comparison of error detectors for time delay tracking
378
Comparison of Error Estimators in Eddy Current Testing
379
Comparison of error probability for OFDM and SC-FDE
380
Comparison of Error Propagation in Local-Level and Space-Stable Inertial Systems
381
Comparison of error rates in combinational and sequential logic
382
Comparison of error-control schemes for high-rate communication over short DSL loops affected by impulsive noise
383
Comparison of error-correcting schemes in T-DMB and DAB systems
384
Comparison of ERS and Nscat scatterometer for ocean applications under very high wind conditions
385
Comparison of ERS Tandem Phase Scatterometer and SAR derived wind speed
386
Comparison of ERS wind-scatterometer and SSM/I data for Sahelian vegetation monitoring
387
Comparison of ERS-1 and ALMAZ-1 SAR ocean wave imaging
388
Comparison of ERS-2 and JERS for fire impact assessment in tropical rainforests
389
Comparison of ERS2 and TOPEX microwave radiometer absolute calibrations at high brightness temperatures
390
Comparison of ERS-2 SAR, HUTSCAT and CARABAS results for boreal forest
391
Comparison of ESD Immunity Between GaAs-Based LNA and SiGe-Based LNA
392
Comparison of ESD protection capability of lateral BJT, SCR and bidirectional. SCR for hi-voltage BiCMOS circuits
393
Comparison of ESD protection capability of SOI and bulk CMOS output buffers
394
Comparison of ESD protection effect between protective elements on electric devices and ESD countermeasure materials by applying voltage with ESD gun
395
Comparison of ESI-MS Spectra in MassBank Database
396
Comparison of ESRF and Elettra vacuum evolution, troubleshooting and success
397
Comparison of ESTAR and SSM/I derived surface soil moisture
398
Comparison of estimated building story number for exposure mapping from high resolution space-borne images
399
Comparison of Estimates of the Costs of Penalty Payments in a MV Distribution Network Obtained by Simulation and from Observed Data
400
Comparison of estimating forest above-ground biomass over montane area by two non-parametric methods
401
Comparison of estimation methods for compensating the saturation effects in secondary current of Current Transformers
402
Comparison of estimation methods of electromagnetic compatibility on the criterion of outage time percentage vs. interferences
403
Comparison of estimation performance between single and multiple disturbance observers for LTI systems
404
Comparison of estimation schemes for the K-distribution shape parameter
405
Comparison of Estimation Techniques Using Kalman Filter and Grid-Based Filter for Linear and Non-linear System
406
Comparison of estimators for frequency offset
407
Comparison of Estimators of Tail Dependence Coefficient
408
Comparison of estimators of the mean radar reflectivity from a finite number of correlated samples
409
Comparison Of Etch Performance In The Gec Referxmce Cdl With A Cqmmemial Etcher
410
Comparison of ETX and HOP count metrics using Glomosim simulator
411
Comparison of Euclidean distance based neural networks for analog Integrated Circuits fault recognition- LVQS &SOM
412
Comparison of evaluated and measured performances of common mode chokes
413
Comparison of evaluation criteria for power amplifier behavioral modeling
414
Comparison of evaluation for vendor selection under e-commerce based on grey theory
415
Comparison of evaluation methods of the small current breaking performance for SF6 gas circuit breakers
416
Comparison of Evaluation Metrics in Classification Applications with Imbalanced Datasets
417
Comparison of evaluation of kawaii ribbons between genders and generation of Japanese
418
Comparison of evanescent and directly coupled optical interconnections embedded into electronic interconnection substrates
419
Comparison of evaporation duct models with meteorology grads tower measurements
420
Comparison of event detection methods for centralized sensor networks
421
Comparison of event positioning algorithms for PEM imaging
422
Comparison of event-related potentials between conceptually similar Chinese words and pictures
423
Comparison of Event-Triggered and Cycle-Driven Models for Verifying SFC Programs
424
Comparison of evoked potential source localization and functioned MRI in a four-shell ellipsoidal volume conductor
425
Comparison of evolutionary algorithms for LPDA antenna optimization
426
Comparison of evolutionary algorithms in the task of chaos control optimization
427
Comparison of evolutionary and conventional feature extraction methods for malt classification
428
Comparison of Evolutionary and Rule-Based Strategies for Electromagnetic Device Optimization
429
Comparison of evolutionary multi objective algorithms for the dynamic network design problem
430
Comparison of Evolutionary Multi-Objective Optimization Algorithms for the utilization of fairness in network control
431
Comparison of evolved epidemic networks with diffusion characters
432
Comparison of exact and approximate finite-element solution of the two-dimensional nonlinear eddy-current problem with measurements
433
Comparison of exact and approximate FSO rain attenuation formulas based on actual DSD
434
Comparison of exact and approximate optical designs for graded-interface distributed Bragg reflectors
435
Comparison of exact static and dynamic Bayesian context inference methods for activity recognition
436
Comparison of Exact Theoretical Predictions and Experimental Results for Interdigital Transducers
437
Comparison of exact, image and TL model of a horizontal wire above two-layer soil
438
Comparison of Exactness of Scalar and Vectorial Optical Methods Used to Model a VCSEL Operation
439
Comparison of excessive Balmer α line broadening of inductively and capacitively coupled RF, microwave, and glow-discharge hydrogen plasmas with certain catalysts
440
Comparison of exercise algorithms for diagnosis of coronary artery disease
441
Comparison of existing & proposed SOI MOSFET device structures for minimizing total dose radiation damage
442
Comparison of existing LFC approaches in a deregulated environment
443
Comparison of expected and measured values of luminance sensors in dual-axis photovoltaic positioning system
444
Comparison of Expected Failure Times for Several Replacement Policies
445
Comparison of Expected Performance on B3G Spread Spectrum Mobile Radio Links at 1.9 and 5.8 GHz Based on Propagation Measurements
446
Comparison of experiences of electricity markets in “BRIC” countries
447
Comparison of experiment and simulation results for inductance and equivalent resistance obtained using multi-port transformer model and FEM
448
Comparison of Experiment and Simulation Results of Interlayer Thickness Effect in Perpendicular Recording Media
449
Comparison of experimental and aggregate induction motor responses
450
Comparison of experimental and calculated GalnP quantum well gain spectra
451
Comparison of experimental and computed protein anisotropic temperature factors
452
Comparison of experimental and computed results on arsenic- and phosphorus-doped polysilicon emitter bipolar transistors
453
Comparison of experimental and numerical results for transient electromagnetic fields induced on a scale model aircraft by current-injection technique
454
Comparison of experimental and numerical results on microwave coupling into cylindrical enclosures
455
Comparison of Experimental and Simulated Am/Be Neutron Source Energy Spectra Obtained in Silicon Detector
456
Comparison of experimental and simulated results for the SSC LEBT
457
Comparison of experimental and theoretical excited-state spectra for rhodamine 6G
458
Comparison of experimental and theoretical gain-current relations in GaInP quantum well lasers
459
Comparison of experimental and theoretical results for high frequency bubble propagation under T-bar tracks
460
Comparison of experimental and theoretical results of room temperature operated single electron transistor made by STM/AFM nano-oxidation process
461
Comparison of experimental and theoretical results on polysilicon emitter bipolar transistors
462
Comparison of experimental and theoretical scattering effects from melting ice spheres at microwave and millimeter-wave frequencies
463
Comparison of experimental charge collection waveforms with PISCES calculations
464
Comparison of experimental data to that of a semiempirical model for helical MCG´s
465
Comparison of experimental data with AMPS modeling of the effects of CdS layer thickness on the CdS/CdTe solar cell
466
Comparison of experimental losses among six different topologies for a 1.6 kW boost converter, using IGBTs
467
Comparison of Experimental Measurements of Current Distribution in a Flat Conductor With Simulated Results From the Partial Inductance Method
468
Comparison of experimental measurements of power MOSFET SEBs in dynamic and static modes
469
Comparison of experimental methods for measuring radiation efficiency of antennas for portable telephones
470
Comparison of experimental pulse-height distributions in germanium detectors with Integrated-Tiger-Series-code predictions
471
Comparison of experimental radar cross-section measurements
472
Comparison of experimental results about the influence of gassing walls of different plastic compounds on arcs confined both in tubes and in MCBs
473
Comparison of Experimental Results of a MANET Testbed in Different Environments Considering BATMAN Protocol
474
Comparison of experimental target currents with analytical model results for plasma immersion ion implantation
475
Comparison of experimental techniques for determination of stray capacitances in high frequency transformers
476
Comparison of Experimental Techniques for Evaluating the Correction Factor of a Rectangular Waveguide Microcalorimeter
477
Comparison of experimental techniques for evaluating the correction factor of a rectangular waveguide microcalorimeter
478
Comparison of experiments in statistical decision problems with fuzzy utilities
479
Comparison of experiments on plasma rotation in counter-rotating and divergent plasma centrifuges for isotope separation
480
Comparison of experimetal with computed tropospheric refraction
481
Comparison of experts and non-experts in throwing darts based on optimization criteria
482
Comparison of Experts´ between Non-experts´ Apple Peeling Skills and the Designing of Learning Support System
483
Comparison of expressions for terahertz generation for bulk optical rectification away from normal incidence
484
Comparison of extended and Unscented Kalman Filter for localization of passive UHF RFID labels
485
Comparison of Extended and Unscented Kalman Filters applied to EEG signals
486
Comparison of extended and unscented Kalman smoother in deriving kinematic characteristics of a high maneuver flying target
487
Comparison of extended Petri nets for high throughput production line accurate modelling and simulation
488
Comparison of Extended-Kalman- and Particle-Filter-Based Sensorless Speed Control
489
Comparison of external intensity modulators for multicarrier optical wireless communication systems
490
Comparison of external motion tracking systems for PET list-mode reconstruction
491
Comparison of externally and directly modulated AM-VSB CATV EDFA-repeatered supertrunking systems using split-band and WDM techniques
492
Comparison of extinction in fog and rain on terrestrial propagation paths
493
Comparison of extinction ratio enhancement of 10 and 40 Gb/s RZ-OOK signals using pump-modulated four-wave mixing in a silicon waveguide
494
Comparison of extracellular signals between gold and carbon nanotubes based microelectrode arrays
495
Comparison of extracted rules from multiple networks
496
Comparison of Extracting Rural Residential Area from Satellite Images with Multiresolution
497
Comparison of extracting the urban green land from satellite images with multi-resolutions
498
Comparison of Extraction Methods for Bug Tracking System Analysis
499
Comparison of Extreme Learning Machine with Support Vector Regression for Reservoir Permeability Prediction
500
Comparison of extreme-ANFIS and ANFIS networks for regression problems
501
Comparison of extremum seeking control algorithms for robotic applications
502
Comparison of eye and lip measurements obtained using single and stereo photogrammetry
503
Comparison of eyelid and eyelash detection algorithms for performance improvement of iris recognition
504
Comparison of Eyes Characteristics in Different Color Spaces
505
Comparison of fabric and embroidered dipole antennas
506
Comparison of fabrication methods for bonded wafer SOI
507
Comparison of fabrication tolerance sensitivity between substrate integrated waveguide and microstrip circuits
508
Comparison of face detection and image classification for detecting front seat passengers in vehicles
509
Comparison of face image quality metrics: Electronic and legacy mug shots
510
Comparison of face verification results on the XM2VTFS database
511
Comparison of facet temperature and degradation of unpumped and passivated facets of Al-free 940-nm lasers using photoluminescence
512
Comparison of Facsimile Data Compression Schemes
513
Comparison of factors influencing job satisfaction in domestic and foreign banks in China
514
Comparison of FACTSSTATCOM models for damping oscillations in power system due to small perturbations
515
Comparison of fading channel capacity under different CSI assumptions
516
Comparison of failure detectors and group membership: performance study of two atomic broadcast algorithms
517
Comparison of failure mechanisms of ESD GGNFET subjected to VFTLP robustness and reliability tests
518
Comparison of Failure Mode Criteria in Electromagnetic Environments
519
Comparison of fair queuing algorithms with a stochastic approach
520
Comparison of fast frequency estimation methods for trajectory planning tuning
521
Comparison of fast integral mesh truncation schemes for hybrid FE-BI systems
522
Comparison of fast measurement methods for short-term negative bias temperature stress and relaxation
523
Comparison of fast modular multiplication architectures in FPGA
524
Comparison of fast permanent magnet flux estimation methods for railway traction application PMSMs
525
Comparison of fast photodetector response measurements by optical heterodyne and pulse response techniques
526
Comparison of fast radix 2 ACS with adaptive fast radix 2 ACS in Viterbi Decoder
527
Comparison of Fast Scintillators With TOF PET Potential
528
Comparison of fatigue life for three types of manual wheelchairs
529
Comparison of fault currents in multiterminal HVDC grids with different grounding schemes
530
Comparison of fault detection techniques: problem and solution
531
Comparison of fault management applications in French and Finnish distribution control centers
532
Comparison of fault ride-through strategies for wind turbines with DFIM generators
533
Comparison of fault tolerant control algorithm using space vector modulation of PMSM drive
534
Comparison of fault-tolerance techniques for massively defective fine- and coarse-grained nanochips
535
Comparison of fault-tolerant fabless CLBs in SRAM-based FPGAs
536
Comparison of Fault-Tolerant Operations for Permanent-Magnet Hybrid Brushless Motor Drive
537
Comparison of FBLC (Feed-Back Linearisation) and PI-Controller for UPFC to enhance transient stability
538
Comparison of FBP and Iterative Algorithms with Non-Uniform Angular Sampling
539
Comparison of FBP and iterative algorithms with non-uniform angular sampling
540
Comparison of FBP and OSEM for volume determination in SPECT imaging
541
Comparison of FDIR technique between passive and active distribution systems
542
Comparison of FDR and HDR Under Adaptive Modulation With Finite-Length Queues
543
Comparison of FDTD algorithms for subcellular modeling of slots in shielding enclosures
544
Comparison of FDTD and MoM for shielding effectiveness modelling of test enclosures
545
Comparison of FDTD and SPICE simulations for lossy and dispersive nonlinear transmission lines
546
Comparison of FDTD computed and measured radiation patterns of commercial mobile telephones in presence of the human head
547
Comparison of FDTD excitation models for scatterometry of periodic reticles
548
Comparison of FDTD Hard Source With FDTD Soft Source and Accuracy Assessment in Debye Media
549
Comparison of FDTD particle pushing and direct differencing of Boltzmann´s equation for SGEMP problems
550
Comparison of Fe/Al2O3 and Fe, Co/Al2O3 catalysts used for production of carbon nanotubes from acetylene by CCVD
551
Comparison of FEA field models combined with analytical method to determine the performance characteristics of high efficiency induction motors
552
Comparison of feature and classifier algorithms for online automatic sleep staging based on a single EEG signal
553
Comparison of feature detection techniques for AUV navigation along a trained route
554
Comparison of feature extraction algorithms for mammography images
555
Comparison of feature extraction and feature selection approaches to decide whether a face image belongs to a male or a female
556
Comparison of feature extraction methods for head recognition
557
Comparison of feature extraction methods for speech recognition in noise-free and in traffic noise environment
558
Comparison of feature extraction methods in partial discharge waveform recognition
559
Comparison of feature extraction techniques for face verification using elastic graph matching on low-power mobile devices
560
Comparison of feature extraction techniques in automatic face recognition systems for security applications
561
Comparison of Feature Extractors in License Plate Recognition
562
Comparison of feature extractors on DC power system faults for improving ANN fault diagnosis accuracy
563
Comparison of feature implementations across languages, technologies, and styles
564
Comparison of feature point extraction methods based on UAV remote sensing image
565
Comparison of feature ranking methods based on information entropy
566
Comparison of Feature Reduction Algorithms for Classifying Tree Species With Hyperspectral Data on Three Central European Test Sites
567
Comparison of feature selection algorithms for acoustic event detection system
568
Comparison of feature selection algorithms for medical data
569
Comparison of feature selection approaches based on the SVM classification
570
Comparison of Feature Selection Methods for Cross-Laboratory Microarray Analysis
571
Comparison of feature selection methods for multiclass cancer classification based on microarray data
572
Comparison of Feature Selection Methods for Syncope Prediction
573
Comparison of feature selection schemes for color texture classification
574
Comparison of feature selection strategies for hearing impairments diagnostics
575
Comparison of Feature Selection Techniques for Detection of Malignant Tumor in Brain Images
576
Comparison of feature selection techniques for viral DNA replication origin prediction
577
Comparison of Feature Space Methods for Face Recognition
578
Comparison of Feature-Based Criminal Network Detection Models with k-Core and n-Clique
579
Comparison of Features Based on MFCCs and Eigen Values of Autocorrelation Matrix for Cross-Lingual Vocal Emotion Recognition in Five Languages of Assam
580
Comparison of features extracted using time-frequency and frequency-time analysis approach for text-independent speaker identification
581
Comparison of features for musical instrument recognition
582
Comparison of Features for Voxel-Based Analysis and Classification of Anatomical Neuroimaging Data
583
Comparison of FEC types with regard to the efficiency of TCP connections over AWGN satellite channels
584
Comparison of federated and centralized Kalman filters with fault detection considerations
585
Comparison of Feedback Control Techniques for Torque-Vectoring Control of Fully Electric Vehicles
586
Comparison of feedback controllers for feedback-error-learning neural network control system with application to a flexible micro-actuator
587
Comparison of feedback linearization and flatness control for anti-slip regulation (ASR) of an hybrid vehicle: From theory to experimental results
588
Comparison of feedforward and feedback neural network architectures for short term wind speed prediction
589
Comparison of feedforward and model predictive control of wind turbines using LIDAR
590
Comparison of feedforward and recurrent neural network language models
591
Comparison of Feed-Forward and Recurrent Neural Networks in Active Cancellation of Sound Noise
592
Comparison of feed-forward neural net algorithms in application to character recognition
593
Comparison of Feed-Forward Neural Network training algorithms for oscillometric blood pressure estimation
594
Comparison of FEM-PEEC Coupled Method and Finite-Element Method
595
Comparison of femto cell deployment models for an interference avoidance technique
596
Comparison of femtosecond electron beam diagnostic methodologies
597
Comparison of femtosecond noncollinear and collinear optical parametric amplification in the mid-IR with 1.25 /spl mu/m pumping
598
Comparison of ferrite materials for pulse applications
599
COMPARISON OF FERRITE MATERIALS FOR PULSE APPLICATIONS
600
Comparison of Ferroelectric and Piezoelectric Properties of Sol-gel Grown and Sputter Deposited Pb(Zr, Ti)O3 Thin Films
601
Comparison of ferrolectric and varactor tunable filters controlled by DAC
602
Comparison of ferromagnetic resonance and damping in permalloy films using time and frequency domain techniques
603
Comparison of FETD Numerical and Experimental Results for Frequency Selective Surfaces
604
Comparison of few wavelets to filter ocular artifacts in EEG using lifting wavelet transform
605
Comparison of FFH FSK nonlinear combining receivers in a fading channel with partial-band interference
606
Comparison of FFT, AR and wavelet methods in transcranial Doppler signal obtain from intracerebral vessels
607
Comparison of FFT/IFFT Designs Utilizing Different Low Power Techniques
608
Comparison of FH/CDMA and DS/CDMA for wireless survivable networks
609
Comparison of FH/CDMA and DS/CDMA for wireless survivable networks
610
Comparison of FH/CDMA and DS/CDMA for wireless survivable networks
611
Comparison of FH-MA communications using OFDM and DS-MA systems for wideband radio access
612
Comparison of fiber Bragg grating dispersion-compensators made with holographic and e-beam written phase masks
613
Comparison of Fiber-Based Frequency Comb and Ti:Sapphire-Based Frequency Comb
614
Comparison of fiber-optic Sagnac and Mach-Zehnder interferometers with respect to thermal processes in the fiber
615
Comparison of FIB-induced physical and chemical etching
616
Comparison of fibre and coaxial link for access network in microcellular PCS
617
Comparison of fibroglandular tissue distributions for microwave tomographic breast images with complementary MR T2 weighted images
618
Comparison of FICDM and Wafer-Level CDM Test Methods
619
Comparison of field and circuit analysis for retrieving complex dielectric constant from dielectric material scattering coefficient
620
Comparison of field and circuit generator models in single machine infinite bus system simulations
621
Comparison of field electron emission from carbon nanotube films produced by different techniques
622
Comparison of field measurements and statistical estimation of link PMD coefficients in optical systems
623
Comparison of field oriented and field acceleration methods of induction motor control
624
Comparison of field results and digital simulation results of voltage source converter-based FACTS controllers
625
Comparison of Field Results and Digital Simulation Results of Voltage Source Converter-Based FACTS Controllers
626
Comparison of field results and digital simulation results of voltage-sourced converter-based FACTS controllers
627
Comparison of Field Switching Surge Measurements with Transient Network Analyzer Measurements
628
Comparison of field uniformity characteristics in a triangular reverberation chamber with QRS diffusers
629
Comparison of field-oriented control and direct torque control for induction motor drives
630
Comparison of fields emitted from high frequency silicon-integrated, microfabricated inductors
631
Comparison of field-strength prediction methods in the UHF-range
632
Comparison of field-to-line coupling models: Coupled transmission lines model versus single-cell corrected Taylor model
633
Comparison of File Integrity Monitoring (FIM) techniques for small business networks
634
Comparison of fillers in two polymers
635
Comparison of film capacitor designs for a high power density application
636
Comparison of filter approaches based on RVFL classifier
637
Comparison of Filter Bank Based Multicarrier Systems with OFDM
638
Comparison of filter components of back-to-back and matrix converter by analytical estimation of ripple quantities
639
Comparison of Filter Design Methods to generate Analytic Signals
640
Comparison of filter designs for a digital beam-phase feedback system in a Heavy-Ion Synchrotron
641
Comparison of filter types used for command preconditioning in vibration suppression applications
642
Comparison of filterbanks for high quality audio coding
643
Comparison of filtering algorithms for ground target tracking using space-based GMTI radar
644
Comparison of filtering and classification techniques of electroencephalography for brain-computer interface
645
Comparison of filtering techniques for simultaneous localization and tracking
646
Comparison of filtering techniques for the analysis of mobile radio channel parameters
647
Comparison of filters: Inkjet printed on PEN substrate versus a laser-etched on LCP substrate
648
Comparison of Filtration Characteristics of Activated Sludge Between MBR and HMBR
649
Comparison of final costs and undervalues between reverse and forward engineering products
650
Comparison of fingerprint quality measures using an optical and a capacitive sensor
651
Comparison of Finite Difference and Finite Volume Method for Numerical Simulation of Driven Cavity Flow Based on MAC
652
Comparison of Finite Difference and Wavelet-Galerkin Methods for the Solution of Telegraph Equations
653
Comparison of Finite Difference Methods for Temperature Prediction in Axisymmetric HV Insulation Systems
654
Comparison of finite difference time domain results for scattered EM fields: Yee algorithm vs. a characteristic based algorithm
655
Comparison of finite element analysis of the first molar in two different rehabilitaition systems
656
Comparison of finite element and finite box discretization for three-dimensional diffusion modeling using AMIGOS
657
Comparison of Finite Element Bases for Global Illumination in Image Synthesis
658
Comparison of finite element methods for turbine generator negative sequence performance prediction
659
Comparison of finite elements model elastograms and IVUS elastograms acquired from phantoms and arteries
660
Comparison of finite integration technique (FIT) and transmission line matrix (TLM) for numerical dosimetry in HF/VHF band
661
Comparison of Finite Time Lyapunov Exponent and Mean Flow Energy during two contrasting years in the Adriatic Sea
662
Comparison of finite-control-set model predictive control versus a SVM-based linear controller
663
Comparison of Finite-Difference and Finite-Element Schemes for Magnetization Processes in 3-D Particles
664
Comparison of finite-difference time-domain SAR calculations with measurements in a heterogeneous model of man
665
Comparison of Finite-Element-Based State-Space Models for PM Synchronous Machines
666
Comparison of finite-state models
667
Comparison of finite-state models for simulating the DVB-H link layer performance
668
Comparison of FIR and ANFIS methodologies for prediction of mean blood pressure and auditory evoked potentials index during anaesthesia
669
Comparison of first and second annealing GaN photocathode
670
Comparison of first order PMD compensation techniques
671
Comparison of first order statistical and autoregressive model features for activity prediction
672
Comparison of First-Order Finite Difference and Finite Element Algorithms for the Analysis of Magnetic Fields, Part II. Numerical Results
673
Comparison of First-Order Finite Difference and Finite Element Algorithms for the Analysis of Magnetic Fields. Part I: Theoretical Analysis
674
Comparison of First-Order Finite Difference and Finite Element Algorithms for the Analysis of Magnetic Fields. Part II. Numerical Results
675
Comparison of Fist-Order Finite Difference and Finite Element Alogorithms for the Analysis of Magnetic Fields. Part I: Theoretical Analsyis
676
Comparison of fitness landscapes for evolutionary design of dipole antennas
677
Comparison of five antennas for WBAN applications
678
Comparison of Five Black-box Testing Methods for Object-Oriented Software
679
Comparison of five color models in skin pixel classification
680
Comparison of five current meters in a tidally dominated flow
681
Comparison of five different approaches for real time digital feedback control of PWM inverters
682
Comparison of Five Different Classifiers for Classification of Mental Tasks
683
Comparison of five high speed bistables by computer simulation
684
Comparison of five leg inverter and five phase full bridge inverter for five phase supply
685
Comparison of five level and seven level cascaded multilevel inverter based dstacom for compensation of harmonics and reactive power using instantaneous real-power theory
686
Comparison of five level converters: Features and control
687
Comparison of five popular identification algorithms: A survey
688
Comparison of Five Slope Correction Methods for Leaf Area Index Estimation From Hemispherical Photography
689
Comparison of five time series EMG features extractions using Myo Armband
690
Comparison of Five Topologies for an Interior Permanent-Magnet Machine for a Hybrid Electric Vehicle
691
Comparison of five topologies rotor permanent magnet motors with improved fault-tolerance
692
Comparison of Five-Level Voltage-Source Inverter Based STATCOMs
693
Comparison of five-phase induction machine operation with various stator-winding arrangements
694
Comparison of fixed and variable sampling frequency digital PLL for active power filters
695
Comparison of fixed networks versus wireless CDMA networks
696
Comparison of fixed speed and doubly-fed induction wind turbines during power system disturbances
697
Comparison of fixed speed wind turbines models: A case study
698
Comparison of Fixed-Point Arithmetic Errors for the FPGA-Based CRAIMOT Basis Function Generators
699
Comparison of fixed-point FIR digital filter design techniques
700
Comparison of fixed-rate video codecs for wireless videophony
701
Comparison of fixed-size and variable-sized windows for the estimation of tree crown position
702
Comparison of flexible and rigid hand-grip control during a feed-forward visual tracking task
703
Comparison of flicker noise in single layer, AMR and GMR sandwich magnetic film devices
704
Comparison Of Flicker Noise In Single Layer, AMR And GMR Sandwich Magnetic Film Devices
705
Comparison of flicker sensitivity in HPS lamps
706
Comparison of flight and ground data for radiation-induced high current states in the 68302 microprocessor
707
Comparison of flight paths from fixed-wing and rotorcraft small unmanned aerial systems at SR530 mudslide Washington state
708
Comparison of flip chip and wire bond interconnections and the technology evaluation on 51 GHz transceiver modules
709
Comparison of flip chip technologies on rigid polyimide with respect to reliability and manufacturing costs
710
Comparison of floating gate neural network memory cells in standard VLSI CMOS technology
711
Comparison of floating-body effects in conventional and graded-channel fully-depleted silicon-on-insulator nMOSFETs
712
Comparison of flooding and directed diffusion for wireless sensor network
713
Comparison of Flooding Techniques for Safety Applications in VANETs
714
Comparison of floorplanning algorithms for full custom ICs
715
Comparison of flow in normal and stenosed carotid bulb
716
Comparison of flow-sound relationship for different features of tracheal sound
717
Comparison of fluidic refractive index sensing using microfibers and side-polished fibers
718
Comparison of fluorescence image filtering based on optical mapping of cardiac electrical activity
719
Comparison of fluorescence properties for single crystal and polycrystalline YAG:Ce
720
Comparison of fluorescence properties for single crystal and polycrystalline YAG:Ce
721
Comparison of Fluorescence Retrieval Algorithms using Radiative Transfer Simulations and Field Measurements
722
Comparison of fluorescent lamp stabilization methods in the current-fed push-pull inverter
723
Comparison of fluorescent lamp stabilization methods in the current-fed push-pull inverter
724
Comparison of fluorophore and peroxidase labeled aptamer assays for MUC1 detection in cancer cells
725
Comparison of flux and real power based MRAS for inverse Rotor time constant estimation in induction Motor Drives
726
Comparison of flux control capability of a series double excitation machine and a parallel double excitation machine
727
Comparison of flux distribution in three-phase transformer cores assembled from amorphous material and grain oriented silicon iron
728
Comparison of flux distribution in three-phase transformer cores assembled from amorphpus material and grain oriented silicon iron
729
Comparison of Flux Regulation Ability of the Hybrid Excitation Doubly Salient Machines
730
Comparison of flux switching and modulated pole linear machines for use with a free piston
731
Comparison of flux switching and surface mounted permanent magnet generators for aerospace applications
732
Comparison of flux switching and surface mounted permanent magnet generators for high-speed applications
733
Comparison of flux switching permanent magnet machines with hybrid excitation
734
Comparison of flux weakening capability in alternative switched flux permanent magnet machines by mechanical adjusters
735
Comparison of flux-regulation capability of a hybrid-excited flux-switching machine with different magnet materials
736
Comparison of flux-switching and doubly-salient permanent magnet brushless machines
737
Comparison of flying height measurement between multi-channel laser interferometer and the capacitance probe slider
738
Comparison of flywheels and batteries in combination with industrial plants for the provision of Primary Control Reserve
739
Comparison of FMCW and pulse type groundpenetrating radar(GPR) for water leakage detection
740
Comparison of FMEA and field-experience for a turbofan engine with application to case based reasoning
741
Comparison of fMRI activation and EEG source localization using beamformers during motor response in the Stroop task: Preliminary results
742
Comparison of fMRI BOLD Effect and Arterial Pulsation Harmonic Distribution among Different Breathing Rate
743
Comparison of fMRI BOLD Effect and Arterial Pulsation Harmonic Distribution among Different Breathing Rate
744
Comparison of foam-based and spring-loaded dry EEG electrodes with wet electrodes in resting and moving conditions
745
Comparison of footwear retrieval systems for synthetic and real shoe marks
746
Comparison of force and power generation patterns and their predictions under different external dynamic environments
747
Comparison of Force and Vibrotactile Feedback with Direct Stimulation for Texture Recognition
748
Comparison of force to weight ratios between a single-sided linear synchronous motor and a tubular linear synchronous motor
749
Comparison of FORE and FOREX for a preclinical PET scanner with large axial aperture
750
Comparison of FORE, OSEM and SAGE algorithms to 3DRP in 3D PET using phantom and human subject data
751
Comparison of FORE, OSEM and SAGE algorithms to 3DRP in 3D PET using phantom and human subject data
752
Comparison of Forecasting Methods for Aspect Ratio of Wood Tracheid
753
Comparison of Forecasting Methods for Freight Volume of Inland Navigation and Hydropower Project Post-Evaluation
754
Comparison of Forest Canopy Structures in SRTM to LIDAR Data
755
Comparison of forest Leaf Area Index retrieval based on simple ratio and reduced simple ratio
756
Comparison of forest parameter estimation techniques using SAR data
757
Comparison of form in potential functions while maintaining upright posture during exposure to stereoscopic video clips
758
Comparison of Form in Potential Functions While Maintaining Upright Postures during Exposure to Stereoscopic Video Clips
759
Comparison of forming gas, nitrogen, and vacuum anneal effects on X-ray irradiated MOSFETs
760
Comparison of formulas estimating fog attenuation on free space optics links
761
Comparison of forward and backward SHG images using Fourier transform-second-harmonic generation imaging
762
Comparison of forward- and backward-propagating optical-fiber-induced noise for application to optical fiber frequency transfer
763
Comparison of forward- and brekward-propagrted second harmonic generation images in lateral overgrown GaN
764
Comparison of forward and, bidirectional pumping at 805 and 819 nm in erbium-doped silica fiber amplifiers
765
Comparison of forward modeling of apparent hydrooptical properties with in situ observations of multi-spectral data in Saginaw Bay: water quality retrievals and implications for SeaWiFS data processing
766
Comparison of forward Vs. feedback Kalman filter for aided inertial navigation system
767
Comparison of Four Approaches to Age and Gender Recognition for Telephone Applications
768
Comparison of four approaches to automatic language identification of telephone speech
769
Comparison of four carrier-based PWM methods for two-level five-phase inverter
770
Comparison of four CMOS transconductors for fully integrated analogue filter applications
771
Comparison of four computer-aided diagnosis schemes for automated discrimination of myocardial heart disease
772
Comparison of four control methods to active power filters applied in accelerator power supplies
773
Comparison of four different digital watermarking techniques
774
Comparison of four different fusion techniques for IKONOS data
775
Comparison of four different methods to estimate the radiated power from mobile phones
776
Comparison of four different methods to fuse multi-sensor and multi-resolution remotely sensed data for urban topographic mapping
777
Comparison of Four Different Types of Ferromagnetic Materials for Fault Current Limiter Applications
778
Comparison of four discrete-time repetitive control algorithms
779
Comparison of Four Distance Measures for Long Time Text-Independent Speaker Identification
780
Comparison of four estimators of the 3D cardiac electrical activity for surface ECG synthesis from intracardiac recordings
781
Comparison of four FFT-based frequency acquisition techniques for Costas loop BPSK signal demodulation
782
Comparison of four fractional power order transfer function models of rotor bar
783
Comparison of Four Freely Available Frameworks for Image Processing and Visualization That Use ITK
784
Comparison of four gravity models
785
Comparison of four intelsat 12 GHz radiometric experiments in rainy climates
786
Comparison of Four Kinds of Fuzzy C-Means Clustering Methods
787
Comparison of four learning algorithms for multilayer perceptron with FIR synapses
788
Comparison of four load models for reliability evaluation considering reconfiguration using Monte Carlo Simulation
789
Comparison of four mathematical models for braking of a motorcycle
790
Comparison of four measurement methods for acquiring maize hemispherical directional brightness temperature with a crane based thermal camera system
791
Comparison of four methods for computing positive-sequence reactances of three-phase core-type transformers
792
Comparison of four methods for premature ventricular contraction and normal beat clustering
793
Comparison of four methods for the identification of linear systems with a time delay
794
Comparison of four methods of on-line identification and controller tuning
795
Comparison of four multi-user quantum key distribution schemes over passive optical networks
796
Comparison of four multi-user quantum key distribution schemes over passive optical networks
797
Comparison of four neural net learning methods for dynamic system identification
798
Comparison of four objective speech quality assessment methods based on international subjective evaluations of universal codecs
799
Comparison of four OFDM signal representations approaches for high dynamic range nonlinear PA behavioural modelling
800
Comparison of four parallel algorithms for systolic array processing
801
Comparison of four parameter selection techniques [force sensors]
802
Comparison of Four Performance Metrics for Evaluating Sampling Techniques for Low Quality Class-Imbalanced Data
803
Comparison of four power electronic transformer topologies on unbalanced load correction capacity
804
Comparison of four QHR systems within one month using a temperature and pressure stabilized 100-Ω resistor
805
Comparison of four similarity measures based on GO annotations for Gene Clustering
806
Comparison of four smartphone compatible blood pressure monitors
807
Comparison of four SNR estimators for QPSK modulations
808
Comparison of four support-vector based function approximators
809
Comparison of Four Text Classifiers on Movie Reviews
810
Comparison of fourier & wavelet transform methods for transmission line fault classification
811
Comparison of fourier and non-fourier heat transfer in nanoscale semiconductor structures
812
Comparison of fourier descriptors and Hu moments for hand posture recognition
813
Comparison of Fourier Transform and Wavelet Packet Transform for quantification of power quality
814
Comparison of four-point adding algorithms for Delaunay-type three dimensional mesh generators
815
Comparison of four-wave mixing and cross phase modulation penalties in dense WDM systems
816
Comparison of four-wave mixing in quantum dots and quantum wells for wavelength conversion
817
Comparison of four-wave mixing techniques for studying orientational relaxation
818
Comparison of Fowler-Nordheim stress on tungsten polycided and non-polycided MOS capacitors
819
Comparison of FPCB windings of BLDC machines with paralelly and radially magnetized rotor poles
820
Comparison of FPGA and ASIC Implementation of a Linear Congruence Solver
821
Comparison of FPGA and GPU implementations of real-time stereo vision
822
Comparison of FPGA based Digital Control Method for Low Carrier-Frequency PWM Inverter
823
Comparison of FPGA-based implementation alternatives for complex algorithms in networked embedded systems - the encryption example
824
Comparison of f-Q scaling in wineglass and radial modes in ring resonators
825
Comparison of fractal characteristics of the electroencephalogram at schoolchildren 10-12 years old in norm and with difficulties in learning
826
Comparison of fractal coding methods for medical image compression
827
Comparison of fractal compression methods impact on radiographic images of weld defects
828
Comparison of fractal dimension estimation algorithms for epileptic seizure onset detection
829
Comparison of fractional and geodesic anisotropy in diffusion tensor images of 90 monozygotic and dizygotic twins
830
Comparison of Fractional Frequency Reuse Approaches in the OFDMA Cellular Downlink
831
Comparison of frame aggregation mechanism in 802.11n WLAN
832
Comparison of frame margin probability training to other discriminative methods for multi-condition speech recognition
833
Comparison of frameworks for high-performance packet IO
834
Comparison of frequency and time domain neural network controllers for an active power filter
835
Comparison of Frequency and Time Domain Schemes for MIMO Broadband Fixed Wireless Access
836
Comparison of Frequency and Time-Domain Iron and Magnet Loss Modeling Including PWM Harmonics in a PMSG for a Wind Energy Application
837
Comparison of frequency dependences of resistance standards made from surface mount resistors
838
Comparison of frequency detectors for low Earth orbit satellite communications systems
839
Comparison of frequency domain and time domain laser velocimeter signal processors
840
Comparison of frequency domain and time domain method for single tone detection
841
Comparison of frequency domain noise reduction strategies based on multichannel Wiener filtering and spatial prediction
842
Comparison of frequency estimators for interrogation of wireless resonant SAW sensors
843
Comparison of frequency measurement between time-domain and frequency-domain in DSO
844
Comparison of Frequency Offset and Timing Offset Effects on the Performance of SC-FDE and OFDM Over UWB Channels
845
Comparison of frequency offset estimation techniques for burst OFDM
846
Comparison of frequency sharing aspects of satellites in elliptical orbits and the geostationary orbit
847
Comparison of Frequency Standards Used for TAI
848
Comparison of Frequency Symmetric Signal Generation From a BPSK Input Using Fiber and Semiconductor-Based Nonlinear Elements
849
Comparison of Frequency Transformation in Time-Varying Dielectric Plane Waveguide and Circular Resonator
850
Comparison of Frequency-domain and Time-domain Diversity for Uplink Synchronous Orthogonal Multicarrier DS-CDMA Systems in Multipath Rayleigh Fading Channels
851
Comparison of Frequency-domain block FxLMS and FxNLMS
852
Comparison of frequency-selective screen-based linear to circular split-ring polarisation convertors
853
Comparison of friction measurement between load/unload ramp and suspension lift tabs using strain gauge and actuator current
854
Comparison of friction measurement between load/unload ramps and suspension lift tabs using strain gage and actuator current
855
Comparison of Friedland´s and Lin-sage´s bias estimation algorithms
856
Comparison of fringe pattern phase retrieval using 2D wavelet trasform and S-Transform
857
Comparison of front and rear surface fs-laser ion acceleration from fusion neutron spectroscopy
858
Comparison of frontal lecture and workshop learning arrangements in a software engineering education project
859
Comparison of FSO 10 Micrometer Availability with FSO 850 nm/RF Hybrid Network Availability
860
Comparison of FSPM topologies applied in open-winding wind power system
861
Comparison of FT-FDTD and Spectral Domain FDTD for Periodic Structures
862
Comparison of FT-IR and Diode Laser Based Absorption Spectroscopy for Trace Gas Monitoring
863
Comparison of Fuel Cell Hybrid Propulsion Topologies with Super-Capacitor
864
Comparison of full and reduced potential formulations for low-frequency applications
865
Comparison of Full and Reduced Potential Formulations for Low-frequency Applications
866
Comparison of full and reduced scale solar PV plant models in multi-machine power systems
867
Comparison of full bridge bipolar, H5, H6 and HERIC inverter for single phase photovoltaic systems - a review
868
Comparison of full pitch and concentrated coil switched reluctance machines
869
Comparison of full scale (RAT-SCAT) and ultrasonically simulated F-102 radiation patterns
870
Comparison of full wave approaches for determination of microstrip conductor losses for MMIC applications
871
Comparison of Full-Duplex and Half-Duplex Modes with a Fixed Amplify-and-Forward Relay
872
Comparison of full-model and reduced-model EKF based position and speed estimators for sensorless DTC of permanent magnet synchronous machines
873
Comparison of fully depleted and partially depleted mode transistors for practical high-speed, low-power 0.35 μm CMOS/SIMOX circuits
874
Comparison of fully distributed and periodically loaded nonlinear transmission lines
875
Comparison of Fully Distributed and Periodically Loaded Nonlinear Transmission Lines
876
Comparison of fully-differential and single-ended current-mode band-pass filters with current active elements
877
Comparison of function based web proxy cache replacement strategies
878
Comparison of functional network integrity in TBI and orthopedic controlpatientsusing graph-theoretical analysis
879
Comparison of Functional Size Based Estimation and Story Points, Based on Effort Estimation Effectiveness in SCRUM Projects
880
Comparison of fundamental frequency and PWM methods applied on a hybrid cascaded multilevel inverter
881
Comparison of fundamental frequency detection methods and introducing simple self-repairing algorithm for musical applications
882
Comparison of fundamental performance of different type of fault current limiters with two air core coils
883
Comparison of fundamental-constant based definitions for the kilogram and the ampere
884
Comparison of Fusion Algorithms for ALOS Panchromatic and Multispectral Images
885
Comparison of Fusion Algorithms for ALOS Panchromatic and Multi-spectral Images
886
Comparison of fusion by morphological pyramid and by high pass filtering
887
Comparison of fusion methods for multiple target tracking
888
Comparison of Fusion Methods for Successive Declarations of Radar Range Pro les
889
Comparison of fusion methods for the infrared and color visible images
890
Comparison of Fusion Methods for Thermo-Visual Surveillance Tracking
891
Comparison of fusion techniques for 3D+T echocardiography acquisitions from different acoustic windows
892
Comparison of future energy supply scenarios with dispersed generation in distribution networks
893
Comparison of future energy supply scenarios with dispersed generation in distribution networks
894
Comparison of fuzzy and MPC based buck converter
895
Comparison of fuzzy and neural network adaptive methods for the position control of a pneumatic system
896
Comparison of fuzzy and neural truck backer-upper control systems
897
Comparison of fuzzy and PI controller based SSSC for damping of sub synchronous resonance
898
Comparison of fuzzy and PI controllers for a benchmark drum-boiler model
899
Comparison of fuzzy clustering algorithms for classification
900
Comparison of Fuzzy Control Rules Using MATLAB Toolbox and Simulink for DC Induction Motor-Speed Control
901
Comparison of fuzzy controllers for the water tank with Type-1 and Type-2 fuzzy logic
902
Comparison of fuzzy forecaster to a statistically motivated forecaster
903
Comparison of fuzzy logic and current-mode control techniques in buck, boost and buck/boost converters
904
Comparison of fuzzy logic and digital PI control of single phase power factor pre-regulator for an on-line UPS
905
Comparison of fuzzy logic and PID controllers for TCSC using Matlab
906
Comparison of fuzzy logic and proportional integral controller of voltage source active filter compensating current harmonics and power factor
907
Comparison of fuzzy logic based and rule based power system stabilizer
908
Comparison of fuzzy logic based tuning methods for PID controllers
909
Comparison of fuzzy modelling approaches for fault detection systems
910
Comparison of fuzzy reasoning and Autoassociative MLP in sleep spindle detection
911
Comparison of fuzzy rules and SVM approach to the value estimation of the use case parameters
912
Comparison of fuzzy, PI and fixed frequency sliding mode controller for DC-DC converters
913
Comparison of FWM- and XPM-induced crosstalk using the Volterra series transfer function method
914
Comparison of G/T between dual-reflector and primary-focus antennas
915
Comparison of gm-boosted oscillators in silicon field effect transistor and silicon-germanium hetero-junction bipolar transistor technology
916
Comparison of gm-boosted oscillators in silicon field effect transistor and silicon-germanium hetero-junction bipolar transistor technology
917
Comparison of GA and PSO performance in parameter estimation of microbial growth models: A case-study using experimental data
918
Comparison of GaAs and CdTe crystals for high-frequency intracavity coupling modulation of CO2lasers
919
Comparison of GaAs and silicon synchronous rectifiers in a 3.3 V out, 50 W DC-DC converter
920
Comparison of GaAs device approaches for ultrahigh-speed VLSI
921
Comparison of GaAs IMPATT designs for 20 GHz
922
Comparison of GaAs MESFET and GaAs p-i-n diodes as switch elements
923
Comparison of GaAs MESFET DC models
924
Comparison of GaAs MESFET noise figures
925
Comparison of Gabor lens, gas focusing, and electrostatic quadrupole focusing for low-energy ion beams
926
Comparison of Gabor projection and decomposition methods in object detection
927
Comparison of gain characteristics of Tm-doped fiber amplifier by different pumping schemes
928
Comparison of gain clamped and conventional semiconductor optical amplifiers for fast all-optical switching
929
Comparison of gain compression in quantum-dot SOAs for multichannel amplification
930
Comparison of gain control techniques to stabilize EDFAs for WDM networks
931
Comparison of gain, bandwidth and noise figure of variable-reactance amplifiers and convertors
932
Comparison of GaInNAs grown by MOCVD and CBE
933
Comparison of GaInNAs laser diodes based on two to five quantum wells
934
Comparison of GaInNAs/GaAs and strain-compensated InGaAs/GaAsP quantum wells for 1200-1300 nm diode lasers
935
Comparison of GaInP/GaAs heterostructure-emitter bipolar transistors and heterojunction bipolar transistors
936
Comparison of gait generation methods in Quadruped walking
937
Comparison of Galled Trees
938
Comparison of GALS and Synchronous Architectures with MPEG-4 Video Encoder on Multiprocessor System-on-Chip FPGA
939
Comparison of game experience and preferences between young and elderly
940
Comparison of gamma and proton-induced radiation damage in long-wavelength VCSELs
941
Comparison of Gamma Densitometer Detectors Used in Loss of Coolant Studies
942
Comparison of gamma radiation performance of a range of CMOS a/D converters under biased conditions
943
Comparison of Gamma-Radiation Induced Attenuation in Al-Doped, P-Doped and Ge-Doped Fibres for Dosimetry
944
Comparison of GaN and 6H-SiC p-i-n photodetectors with excellent ultraviolet sensitivity and selectivity
945
Comparison of GaN HEMTs on Diamond and SiC Substrates
946
Comparison of GaN p-i-n and Schottky rectifier performance
947
Comparison of GaN-based MOS structures with different interfacial layer treatments
948
Comparison of Garbage Collector prototypes for C++ applications
949
Comparison of GARCH and neural network methods in financial time series prediction
950
Comparison of gas content in smoke measured with a continuous-wave terahertz spectrometer and Fourier transform infrared spectrometer
951
Comparison of gas lasers pumping methods in steady-state, radio-frequency and combined fields
952
Comparison of Gas Sensitivity between SnO2 nanoparticles and SnO2 nanobelts
953
Comparison of GaSb p-n junction photodiodes fabricated using Cl2/Ar and Cl2/BCl3/CH4/Ar/H2 plasma
954
Comparison of gasket transfer impedance and shielding effectiveness measurements - Part I
955
Comparison of gasket transfer impedance and shielding effectiveness measurements - Part II
956
Comparison of gate structures for short-channel SOI MOSFETs
957
Comparison of gate-induced drain leakage and charge pumping measurements for determining lateral interface trap profiles in electrically stressed MOSFETs
958
Comparison of Gate-Metal Work Function Variability Between Ge and Si p-Channel FinFETs
959
Comparison of gating techniques for maneuvering target tracking in clutter
960
Comparison of Gaussian and neural network classifiers on vowel recognition using the discrete cosine transform
961
Comparison of Gaussian and Pearson approximations to the normalized detection threshold for the FFT filter bank-based summation CFAR detector
962
Comparison of Gaussian and Rayleigh noise models in inversion of subsurface parameters of layered rough surfaces using simulated annealing
963
Comparison of Gaussian channel with Rayleigh fading channel over LDPC-DPC transmission scheme
964
Comparison of Gaussian mixture and linear mixture models for classification of hyperspectral data
965
Comparison of Gaussian mixture reductions for probabilistic studies in power systems
966
Comparison of Gaussian process models for single-trial event-related potentials
967
Comparison of GDC electrolyte-LSCF cathode IT-SOFC system with conventional power sources
968
Comparison of Ge Surface Passivation Between \\hbox {SnGeO}_{x} Films Formed by Oxidation of Sn/Ge and