ليست عنوان مقالات لاتين فني مهندسي Torque and flux estimation for a rail traction system in the presence of intermittent sensor faults Total dose effects on negative voltage regulator

<< مقالات لاتين فني مهندسي >>

<< بر اساس عنوان >>

1

Torque and flux estimation for a rail traction system in the presence of intermittent sensor faults

2

Torque And flux Feedback Control Of Induction Motor Based On Discrete Model

3

Torque and Force Distribution in the Superconducting Alternator

4

Torque And Force Distribution in the Superconducting Alternator

5

Torque and Force on a Modifed Superconducting Gyro Design in an Axially Symmetric Magnetic Field

6

Torque and its application in the designs of microprocessor distance relays

7

Torque and levitation force comparison of bearingless motor with different rotor structures

8

Torque and Loss Calculation of Rotating Machines Considering Laminated Cores Using Post 1-D Analysis

9

Torque and loss calculation of rotating machines considering laminated cores using post 1-D analysis

10

Torque and losses in the metallic shell of a dual mechanical port PM electrical machine, for dangerous fluid pumps

11

Torque and pitch angle control for variable speed wind turbines in all operating regimes

12

Torque and power limitations of variable speed wind turbines using pitch control and generator power control

13

Torque and power outputs on skilled and unskilled users during manual wheelchair propulsion

14

Torque and Power Rating of a Wind-Power PM Generator Drive for Maximum Profit-to-Cost Ratio

15

Torque and reactive power control of a doubly fed induction machine by position sensorless scheme

16

Torque and reactive power control of a doubly-fed induction machine by position sensorless scheme

17

Torque and reactive power control of doubly-fed induction machine with matrix converter

18

Torque and rotational speed estimation with parameter identification of Line-start Induction Motor for Motor Operated Valve

19

Torque and slip behavior of single-phase induction motors driven from variable frequency supplies

20

Torque and slip behavior of single-phase induction motors driven from variable-frequency supplies

21

Torque and speed control of induction motors using ANN observers

22

Torque and Speed Control of Induction Motors Using Saturable Reactors

23

Torque and speed estimation for line-start IM using dot-cross Products of current and voltage vectors

24

Torque and speed estimator for induction motor using parallel neural networks and sensorless technology

25

Torque and Speed Estimator for Sensorless Induction Motor Drive Using Cascade Neural Networks

26

Torque and speed estimators to be implemented in a control strategy dedicated to TSTPI-fed BDCM drives

27

Torque and speed regulation of induction motors using the passivity theory approach

28

Torque and Theal Cycling as Methods of Testing Reliability of Reflow-Soldered Chip-To-Substlate Joints

29

Torque and unbalanced magnetic force in a rotational unsymmetric brushless DC motors

30

Torque and variable stiffness control for antagonistically driven pneumatic muscle actuators via a stable force feedback controller

31

Torque and velocity ripple elimination of AC permanent magnet motor control systems using the internal model principle

32

Torque and Voltage Quality in Design Optimization of Low-Cost Non-Overlap Single Layer Winding Permanent Magnet Wind Generator

33

Torque and workspace analysis for flexible tendon driven mechanisms

34

Torque angle control of the permanent magnet synchronous machine at the voltage margin

35

Torque area method and its application in analysis of HDD spindle motors with sinusoidal magnetization

36

Torque Area Method and Its Application in Analysis of HDD Spindle Motors With Sinusoidal Magnetization

37

Torque availability from small synchronous motors using high coercivity magnets

38

Torque based control of whirling motion under mechanical resonance

39

Torque based direct driving force control method with driving stiffness estimation for electric vehicle with in-wheel motor

40

Torque based selection of ANN for fault diagnosis of wound rotor asynchronous motor-converter association

41

Torque based spark ignition engine and powertrain modeling

42

Torque behavior of a RFO induction motor drive under voltage sag conditions

43

Torque Behavior of Electric Vehicle Change Mode Drive System

44

Torque behavior of one-PhasePermanent-magnet AC motor

45

Torque behaviour of 1-phase permanent magnet AC motor

46

Torque calculation by Bernstein Bezier´s surfaces

47

Torque Calculation in Finite Element Solutions of Electrical Machines by Consideration of Stored Energy

48

Torque Calculation in Finite Element Solutions of Electrical Machines by Consideration of Stored Energy

49

Torque Calculation Method of Spherical Robotic Wrist Motor

50

Torque calculation of electrical machines based on distributions of surface forces along the stator boundary as well as volume forces inside conducting and iron domains

51

Torque calculation of hysteresis motor using vector hysteresis model

52

Torque calculation of the asynchronous motor in short-circuit test

53

Torque calculation with conforming and nonconforming movement interface

54

Torque calculations of current-source induction machines using the 1-2-0 coordinate system

55

Torque Calculations of Polyphase Reluctance Machines

56

Torque capabilities of a five-phase PM BLDC drive vs. a three-phase one and various supply modes

57

Torque capability and control of a saturated induction motor over a wide range of flux weakening

58

Torque capability comparison of two magnetically geared PM machine topologies

59

Torque capability of high phase induction machines with sinusoidal and trapezoidal airgap field under steady state

60

Torque characteristic analysis considering the manufacturing tolerance for electric machine by stochastic response surface method

61

Torque characteristic analysis of IPM type BLDC motor considering pole/slot combination under stator-turn fault condition

62

Torque characteristic investigation of a permanent magnet spherical motor

63

Torque Characteristic With Respect to the Load Angle of a Permanent Magnet Motor

64

Torque characteristics analysis considering the tolerance of electric machine by stochastic response surface method

65

Torque characteristics analysis of a traveling wave type ultrasonic motor impressed high load torque in low speed range

66

Torque characteristics analysis of an eddy current electric machine for automotive braking applications

67

Torque characteristics analysis of synchronous reluctance motor based on winding function theory

68

Torque characteristics of a motor using bulk superconductors in the rotor in the transient phase

69

Torque characteristics of double-stator hybrid stepping motor with serial magnetic circuit structure

70

Torque characteristics of dual stator permanent magnet vernier machine with different pole/slot combinations

71

Torque characteristics of IPMSM with spoke and axial type magnets

72

Torque characteristics of single phase induction motor for phase control method

73

Torque characteristics of small size single and double stator brushless permanent magnet motor

74

Torque closed-loop vector control of Induction Motor based on stator flux observer

75

Torque close-loop control of a novel soft starter of induction motor

76

Torque Coefficient Analysis Of Multi-device Power Systems

77

Torque comparison between a novel Multilayer Switched Reluctance Motor and a custom one

78

Torque compensation for angle designation controller using analog rate loop

79

Torque compensation for switched reluctance drives

80

Torque compensation in permanent magnet synchronous motor drives for constant torque, varying flux operation

81

Torque Compensation System Design for a Spherical Superconducting Rotor

82

Torque components due to space harmonics in induction motors

83

Torque components identification of induction machine by FEM

84

Torque components in integral- and fractional-slot IPM machines

85

Torque computation by mean and difference potentials (PM motors)

86

Torque computation of hysteresis motor using finite element analysis with asymmetric two dimensional magnetic permeability tensor

87

Torque constraints for hexapod robot slope walking

88

Torque control characterization of a rotary series elastic actuator for knee rehabilitation

89

Torque control development for electric-vehicles motor-wheels using two techniques

90

Torque control during pole-changing transition of a 3:1 pole induction machine

91

Torque control for a form tool drilling operation

92

Torque control for grasping by learning experience and tactile feedback

93

Torque control for IPMSM in the high speed range based on voltage angle

94

Torque control in the joint of a space robotic arm

95

Torque control method of permanent magnet synchronous motor based on Lyaponov theory

96

Torque control methods for active damping of vibrations in drive systems of wind turbines

97

Torque control methods for wind turbines and their responses

98

Torque control of a BDC axial field drive motor with open and closed slot configuration

99

Torque control of a dc machine for wind turbine emulation

100

Torque control of a diesel engine by an eigenpressure based approach

101

Torque control of a push-pull cable driven powered orthosis for the CORBYS platform

102

Torque control of a redundantly actuated passive manipulator

103

Torque control of a spherical machine with variable pole pitch

104

Torque control of a spherical machine with variable pole pitch

105

Torque control of a switched reluctance motor by using torque estimation and excitation angle control

106

Torque control of a synchronous motor with field using a state feedback

107

Torque control of a three-phase direct reluctance motor

108

Torque control of an induction machine based on partial dynamic inversion

109

Torque control of brushless DC motor drive based on DSP technology

110

Torque control of brushless DC motors applied to electric vehicles

111

Torque control of dual induction motors independent drive for tracked vehicle

112

Torque control of electric motors without using torque sensor

113

Torque control of electrohydraulic servo system based on /spl mu/-synthesis theory

114

Torque control of electrorheological fluidic actuators

115

Torque control of electrorheological fluidic actuators for haptic vehicular instrument controls

116

Torque control of harmonic drive gears with built-in sensing

117

Torque Control Of High-speed Switched Reluctance Motor Through Rotor-signal Shifting

118

Torque control of induction machine by vector approximation with parameter adaptation based on MRAS

119

Torque control of induction motor drives based on One-Cycle Control method

120

Torque control of induction motor using predictive observer

121

Torque control of induction motors for hybrid electric vehicles

122

Torque control of IPMSM drives using direct flux control for wide speed operation

123

Torque Control of IPMSM in the Field-Weakening Region With Improved DC-Link Voltage Utilization

124

Torque control of IPMSM to avoid voltage saturation

125

Torque control of permanent magnet BLDC motor during static eccentricity fault

126

Torque control of saturated induction motors with torque per Ampere ratio maximization

127

Torque Control of Sensorless IM Based on Adaptive Feedback Linearization with Unknown Stator and Rotor Resistances in Consideration of Core Loss

128

Torque control of sinusoidal PMAC motors for direct-drive robots

129

Torque control of squirrel-cage induction generator using stator oriented field control

130

Torque control of switched reluctance machine drive system

131

Torque Control of Switched Reluctance Motors

132

Torque control of Virtual Bike with magnetorheological fluid brake and sensory evaluation for difference threshold of pedal resistance

133

Torque Control Optimization of a Switched Reluctance Motor Drive for a 42V Automotive Application

134

Torque control patching and anti-windup and bumpless transfer conditioning of current regulators for high-speed PMSM systems

135

Torque control scheme for PMSM in overmodulation range

136

Torque control strategies for a high performance switched reluctance motor drive system

137

Torque control strategies for snake robots

138

Torque control strategy for a parallel hybrid vehicle using fuzzy logic

139

Torque control strategy for a parallel-hybrid vehicle using fuzzy logic

140

Torque Control Strategy of an IPMSM Considering the Flux Variation of the Permanent Magnet

141

Torque control strategy of non-sinusoidal Brushless DC Motor based on fractional regulator

142

Torque Control Strategy of Polyphase Permanent-Magnet Synchronous Machines With Minimal Controller Reconfiguration Under Open-Circuit Fault of One Phase

143

Torque Control Using High Performance Fuzzy Based Controllers for Large Scale Systems

144

Torque control with nonlinear compensation for harmonic drive DC motors

145

Torque controller design for electrical load simulator with estimation and compensation of parametric uncertainty

146

Torque controller for brushless DC motors

147

Torque controller of a doubly-fed induction generator impelled by a DC motor for wind system applications

148

Torque controller via second order sliding modes of WRIG impelled by DC-motor for application in wind systems

149

Torque converter interactions in a parallel post transmission hybrid driveline

150

Torque coordinated control of independent driving electric vehicles base on BP neural network

151

Torque coordinated control of PHEV based on the fuzzy and sliding mode method with load torque observer

152

Torque Coordination Control During Mode Transition for a Series–Parallel Hybrid Electric Vehicle

153

Torque coordination control of distributed drive electric vehicle for straight line driving

154

Torque coordination of clutch, engine and motor during power transition for a hybrid electric bus

155

Torque Correcting Strategy in Driving Control of New Energy Vehicle

156

Torque Coupled Bang Bang Attitude Control

157

Torque curve measurements in HCP Co in very low fields

158

Torque decomposition and control in an iron core linear permanent magnet motor

159

Torque demand control by nonlinear MPC with constraints for vehicles with variable valve lift engine

160

Torque density and efficiency improvements of a Switched Reluctance Motor without rare earth material for hybrid vehicles

161

Torque Density and Efficiency Improvements of a Switched Reluctance Motor Without Rare-Earth Material for Hybrid Vehicles

162

Torque Density and Magnet Usage Efficiency Enhancement of Sandwiched Switched Flux Permanent Magnet Machines Using V-Shaped Magnets

163

Torque Density Elevation in Concentrated Winding Interior PM Synchronous Motor With Minimized Magnet Volume

164

Torque Density Elevation of Interior PM Synchronous Motor with Minimized Magnet Volume

165

Torque density improvement in a six-phase induction motor with third harmonic current injection

166

Torque density improvement in a six-phase induction motor with third harmonic current injection

167

Torque density improvement of permanent-magnet vernier machines for hybrid electric vehicle

168

Torque density improvement of transverse-flux dual rotor machine for power-split hybrid electric vehicle application

169

Torque density improvements for high performance machines

170

Torque Density of Radial, Axial and Transverse Flux Permanent Magnet Machine Topologies

171

Torque density permanent magnet machine for automotive applications

172

Torque display method for free-form deformation with haptic device

173

Torque distribution and slip minimization in an omnidirectional mobile base

174

Torque distribution control for electric vehicle based on traction force observer

175

Torque Distribution for a Six-Legged Robot

176

Torque distribution for achieving a Hugging Walk

177

Torque Distribution in a Six-Legged Robot

178

Torque distribution strategy for a front and rear wheel driven electric vehicle

179

Torque Distribution Strategy for a Front- and Rear-Wheel-Driven Electric Vehicle

180

Torque distribution strategy for single driveshaft parallel hybrid electric vehicle

181

Torque disturbance rejection improvement by voltage mode control using current driver

182

Torque disturbance rejection in high accuracy tracking systems

183

Torque disturbances and their effect on process control

184

Torque dynamic behaviour of induction machine DTC in 4 quadrant operation

185

Torque dynamics in sensorless PMSM drives

186

Torque enhanced Flux-Switching PM machine for aerospace applications

187

Torque Enhancement of Surface-Mounted Permanent Magnet Machine Using Third-Order Harmonic

188

Torque estimation and compensation for speed control of a DC motor using an adaptive approach

189

Torque estimation based on nonlinear engine model considering crankshaft torsion

190

Torque estimation for combustion engine using nonlinear model

191

Torque Estimation for Robotic Joint With Harmonic Drive Transmission Based on Position Measurements

192

Torque estimation for synchronous reluctance motors using robust flux observer to magnetic saturation

193

Torque estimation in electrical power steering systems

194

Torque Estimation in High-Efficency IPM Synchronous Motor Drives

195

Torque estimation in switched reluctance motor drive using artificial neural networks

196

Torque estimation of permanent magnet DC motor by different numerical methods

197

Torque estimation of robot joint with harmonic drive transmission using a redundant adaptive robust extended Kalman filter

198

Torque estimation system for human leg in passive motion using parallel-wire driven mechanism and iterative learning control

199

Torque estimation technique of robotic joint with harmonic drive transmission

200

Torque estimation using rotor slots harmonics on a three-phase induction motor

201

Torque estimator for a permanent magnet brushless DC motor drive

202

Torque evaluation of a LIGA fabricated electrostatic micromotor

203

Torque evaluation of permanent magnet DC commutator motor using FEM data

204

Torque exerted on anisotropic magnetic medium by electromagnetic wave

205

Torque exerted on anistropic magnetic medium by electromagnetic wave

206

Torque feedback control of dry friction clutches for a dissipative passive haptic interface

207

Torque Feedforward Control Technique for Permanent Magnet Synchronous Motors

208

Torque Feedforward Control Technique for Permanent-Magnet Synchronous Motors

209

Torque fill-in for an automated shift manual transmission in a parallel hybrid electric vehicle

210

Torque fluctuations reducing in a vector-controlled induction motor drive by PI controller tuning using particle swarm optimization

211

Torque Form Design Of Laser Scanning Actuator Based On Statistical Method

212

Torque form design of laser scanning actuator based on statistical method

213

Torque generation model for diesel engine

214

Torque Generation Using Ferroelectric Materials

215

Torque harmonic analysis of induction motor for electric vehicle propulsion

216

Torque harmonic characteristic of Permanent Magnet Synchronous Motor according to ratio numbers of slots and poles

217

Torque Harmonic Compensation in a Synchronous Reluctance Motor

218

Torque Harmonic Compensation in a Synchronous Reluctance Motor

219

Torque harmonic reduction in hybrid vehicles

220

Torque harmonics minimisation in permanent magnet synchronous motor with back EMF estimation

221

Torque harmonics minimization in PM synchronous motor with back EMF estimation

222

Torque improvement in IPMSM for Electric vehicle application

223

Torque Improvement of Dual Three-Phase Permanent-Magnet Machine With Third-Harmonic Current Injection

224

Torque Improvement of Five-Phase Surface-Mounted Permanent Magnet Machine Using Third-Order Harmonic

225

Torque improvement of single phase brushless PM motors by auxiliary magnets

226

Torque improvement of synchronous reluctance machines by utilizing orthogonal experimental design methodology

227

Torque improvement of three-phases full bridge converter based switched reluctance motor with DC assisted winding

228

Torque impulse balance control strategy of FT-FSPM machine Underopen-circuit condition

229

Torque impulse for experimental modal analysis in transmitted vibration study of engine-generators

230

Torque in a bipolar induction meter

231

Torque in a bipolar induction meter

232

Torque in a Bipolar Induction Meter

233

Torque in nested Halbach cylinders

234

Torque in nested Halbach cylinders

235

Torque Kills! Future Control of the Ambient Electromagnetic Spectrum

236

Torque limited path following by on-line trajectory time scaling

237

Torque load observer of induction motor with double squirrel-cage of rotor

238

Torque Magnetometer Using A Superconducting Magnet

239

Torque management of engines with variable cam timing

240

Torque maximization for permanent magnet synchronous motors

241

Torque maximization for permanent magnet synchronous motors

242

Torque maximization in high-torque density multiphase drives based on induction motors

243

Torque maximization of a high-speed switched reluctance starter in acceleration test

244

Torque maximizing control of permanent magnet synchronous motor under voltage and current limitations of PWM inverter

245

Torque measurement experiments of a torque detection mechanism implemented on hand-rims of a one hand drive wheelchair

246

Torque measurement method using air turbine for micro devices

247

Torque measurement methods for very high speed synchronous motors

248

Torque measurement on a simple vertical-axis windmill using a finite flat plate

249

Torque measurement system design

250

Torque measurements in synchronous generators using giant magnetoresistive sensor arrays via the Maxwell stress tensor

251

Torque measurements of an automotive halfshaft utilizing a MEMS resonant strain gauge

252

Torque measurements of textured Y₁Ba₂Cu₃O_7-x sintered pellets

253

Torque measuring devices

254

Torque minimisation of the 2-DOF serial manipulators via an adaptive counterweight system

255

Torque mode control of a Bowden cable-driven assistive system

256

Torque Model for Design and Control of a Spherical Wheel Motor

257

Torque model with fast and slow temperature dynamics of a slipping dry clutch

258

Torque modeling and analysis of spherical cctuators with iron stator

259

Torque modeling and control algorithm of a permanent magnetic spherical motor

260

Torque modeling and optimization of DC machine based on reluctance network taking into account armature reaction magnetic field

261

Torque modeling of a permanent magnet spherical actuator based on magnetic dipole moment principle

262

Torque Modeling of a Spherical Actuator Based on Lorentz Force Law

263

Torque Modeling of Spherical Actuators with Double-layer Poles

264

Torque multiplication and stable range tradeoff in parallel plate angular electrostatic actuators with fixed DC bias

265

Torque notch minimization for five phase quasi square wave back EMF PM synchronous motors with voltage source drives

266

Torque observer and extended H∞ filter for sensorless control of permanent magnet generators tested on a wind turbine emulator

267

Torque observer design for gasoline engines using feedback linearization

268

Torque Observers Design for Spark Ignition Engines With Different Intake Air Measurement Sensors

269

Torque of Reluctance-Type Magnetic Couplings [includes discussion]

270

Torque on a Spinning Hollow Sphere in a Uniform Alternating Magnetic Field

271

Torque on a Spinning Hollow Sphere in a Uniform Magnetic Field

272

Torque optimisation of a variable-reluctance stepping motor

273

Torque optimization algorithm for SRM drives using a robust predictive strategy

274

Torque optimization analysis with magnetic saturation models for induction machines

275

Torque optimization control in space robots with a redundant arm

276

Torque optimization for a 7DOF upper-limb power-assist exoskeleton robot

277

Torque optimization for a SRM using winding function theory with a gap-dividing surface

278

Torque optimization of submersible motors using evolutionary algorithms

279

Torque optimized speed control of a 3-phase induction motor

280

Torque Oscillations of Synchronous Motors Under Starting Conditions

281

Torque pattern generation towards the maximum jump height

282

Torque peak reduction and overload monitoring of induction motors in offshore drilling operations

283

Torque Performance Analysis of HDD Spindle Motors Based on Geometrical Interpretation

284

Torque performance comparison from three-phase with six-phase induction machine

285

Torque performance investigation of double three-phase motor using special current waveform

286

Torque Performance of Optimally Designed Six-PhaseReluctance DC Machine

287

Torque performance of optimally designed three and five phase reluctance synchronous machines with two rotor structures

288

Torque prediction and maximization strategies for bifilar-wound hybrid step motors

289

Torque prediction and optimal control strategies of bifilar hybrid step motors

290

Torque prediction for efficient commutation strategy of bifilar hybrid step motors

291

Torque prediction using stimulus evoked EMG and its identification for different muscle fatigue states in SCI subjects

292

Torque prediction using the flux-MMF diagram in AC, DC, and reluctance motors

293

Torque predictive control of permanent-magnet synchronous motor using duty ratio prediction

294

Torque production capabilities of electrical machines with planar windings

295

Torque production improvement of a five phase fractional-slot PM machine under faulty operation

296

Torque Production in Permanent-Magnet Synchronous Motor Drives with Rectangular Current Excitation

297

Torque production in permanent-magnet synchronous motors

298

Torque production vs. muscle activity during knee flexion/extension

299

Torque profiles of a switched reluctance motor having special pole face shapes and asymmetric stator poles

300

Torque properties of polycrystalline

301

Torque pulsation compensation for a DC motor using an extended Kalman filter approach

302

Torque Pulsation Minimization in a Variable Speed Inverter-Fed Induction Motor Drive System

303

Torque Pulsation Minimization in Spoke-type Interior Permanent Magnet Motors With Skewing and Sinusoidal Permanent Magnet Configurations

304

Torque pulsation minimization in spoke-type interior permanent magnet motors with skewing and sinusoidal permanent magnet configurations

305

Torque Pulsations in Induction Motors with Inverter Drives

306

Torque pulsations in single-phase motors

307

Torque pulsations of multiphase inverter-fed ac motors

308

Torque pulsations on inverter fed induction motors

309

Torque quality and comparison of internal and external rotor axial flux surface-magnet disc machines

310

Torque quality and comparison of internal and external rotor axial flux surface-magnet disc machines

311

Torque quality assessment and sizing optimization for surface mounted permanent magnet machines

312

Torque ratio concept for combustion phasing detection of a spark ignited engine

313

Torque redistribution method for fault recovery in redundant serial manipulators

314

Torque Regulation by Means of Stator Flux Control for Induction Machines

315

Torque regulation with the General Motors ABS VI electric brake system

316

Torque requirements of a radar antenna

317

Torque requirements of a radar antenna

318

Torque ripple adaptive rejection in brushless motors

319

Torque ripple alleviation of a radial magnetic gearbox using step skewing approach

320

Torque ripple analysis and dynamic performance of a space vector modulation based control method for AC-drives

321

Torque ripple analysis and reduction for wind energy conversion systems using uncontrolled rectifier and boost converter

322

Torque ripple analysis and reduction of permanent magnet synchronous motor

323

Torque ripple analysis of a 42V fault tolerant six-phase permanent magnet synchronous machine

324

Torque ripple analysis of a magnetic-geared motor

325

Torque ripple analysis of a permanent magnet brushless DC motor using finite element method

326

Torque ripple analysis of a PM brushless DC motor using finite element method

327

Torque ripple analysis of PMSG in standalone mode supplying harmonic loads

328

Torque ripple analysis of SVPWM in discontinuous region considering minimum pulse width duty

329

Torque ripple analysis of three-phase induction machines with Non-Uniform Coil Groups Distribution

330

Torque ripple analysis with current harmonics in permanent-magnet synchronous machines

331

Torque Ripple and EMI Noise Minimization in PMSM Using Active Filter Topology and Field-Oriented Control

332

Torque ripple and misalignment torque compensation for the built-in torque sensor of harmonic drive systems

333

Torque Ripple and Unbalanced Magnetic Force of a BLDC Motor due to the Connecting Wire Between Slot Windings

334

Torque ripple attenuation for brushless DC motors via adaptive variable structure control

335

Torque ripple attenuation in permanent magnet synchronous motors

336

Torque ripple comparison of a two-level and a three-level inverter fed brushless DC motor drives at different switching frequency

337

Torque ripple comparison of short-pitched and fully-pitched winding switched reluctance machine

338

Torque ripple compensation based on instantaneous torque estimation in permanent magnet synchronous motors

339

Torque ripple compensation in permanent magnet synchronous motors based on Kalman filter

340

Torque ripple compensation method for joint torque sensor embedded in harmonic drive using order analysis

341

Torque ripple compensation of induction motors under field oriented control

342

Torque ripple compensation of vector controlled induction machines

343

Torque ripple compensation using negative sequence current control during unbalanced grid conditions in a DFIG system

344

Torque ripple considerations on large (mill) drives in the cement industry

345

Torque ripple control for synchronous motors using instantaneous torque estimation

346

Torque ripple control of position-sensorless brushless DC motor based on neural network identification

347

Torque Ripple Elimination for Doubly-Fed Induction Motors under Unbalanced Source Voltage

348

Torque ripple estimation and minimisation independent of sensor type

349

Torque ripple improvement for brushless DC miniature motors

350

Torque Ripple Improvement for Interior Permanent Magnet Synchronous Motor Considering Parameters With Magnetic Saturation

351

Torque ripple improvement for synchronous reluctance motor using an asymmetric flux barrier arrangement

352

Torque ripple improvement for synchronous reluctance motor using asymmetric flux barrier arrangement

353

Torque ripple in PWM-VSI-fed drives due to parasitic effects in the inverter control

354

Torque ripple in synchronous machine driven by a three-phases PWM converter

355

Torque ripple in synchronous reluctance motor

356

Torque ripple minimisation control method for a fourphase brushless DC motor with non-ideal back-electromotive force

357

Torque ripple minimisation in a switched reluctance motor by optimum harmonic current injection

358

Torque ripple minimisation in modular permanent magnet brushless machines

359

Torque ripple minimisation in switched reluctance motor with optimal control of phase currents

360

Torque ripple minimisation methods in sinusoidal fed synchronous permanent magnet machines

361

Torque ripple minimization & closed loop speed control of BLDC motor with hysteresis current controller

362

Torque ripple minimization for a Switched Reluctance Motor

363

Torque ripple minimization for induction motor drives with direct torque control (DTC)

364

Torque ripple minimization for PMSM using online estimation of the stator resistances

365

Torque ripple minimization for PMSM using voltage matching circuit and neural network based adaptive state feedback control

366

Torque Ripple Minimization in a Sensorless Switched Reluctance Motor Based on Flexible Neural Networks

367

Torque ripple minimization in a switched reluctance drive by neuro-fuz compensation

368

Torque ripple minimization in a switched reluctance drive by neuro-fuzzy compensation

369

Torque Ripple Minimization in Direct Torque Control based IM Drive Part-I: Single-rate Control Strategy

370

Torque Ripple Minimization in Direct Torque Control based IM Drive Part-II: Multirate Control Strategy

371

Torque ripple minimization in Direct Torque Control based induction motor drive using multilevel inverter

372

Torque ripple minimization in direct torque control based induction motor drive using optimal multirate sampling technique

373

Torque ripple minimization in direct torque control of induction machines

374

Torque ripple minimization in direct torque control of six-phase induction machines using fuzzy inference systems

375

Torque ripple minimization in direct-drive systems

376

Torque ripple minimization in DTC based induction motor drive using carrier space vector modulation technique

377

Torque ripple minimization in DTC induction motor drive using constant frequency torque controller

378

Torque ripple minimization in DTC of induction motor based on optimized flux value determination

379

Torque ripple minimization in five-phase three-level inverter fed direct torque control induction motor drive

380

Torque Ripple Minimization in Interior PM Machines using FEM and Multiple Reference Frames

381

Torque ripple minimization in permanent magnet synchronous motor magnet demagnetization

382

Torque ripple minimization in permanent magnet synchronous servodrive

383

Torque ripple minimization in permanent magnet synchronous servodrive

384

Torque ripple minimization in PM synchronous motor using iterative learning control

385

Torque ripple minimization in PM synchronous motors an iterative learning control approach

386

Torque ripple minimization in PM synchronous motors based on backstepping neural network

387

Torque ripple minimization in PM synchronous motors using iterative learning control

388

Torque ripple minimization in SRM drives using phase/current profiles

389

Torque ripple minimization in surface-mounted PM drives by means of PI + multi-resonant controller in synchronous reference frame

390

Torque ripple minimization in switched reluctance drives using self-learning techniques

391

Torque ripple minimization in switched reluctance machine by pole arcs design

392

Torque ripple minimization in switched reluctance machines over a wide speed range

393

Torque Ripple Minimization in Switched Reluctance Motor Based on BP Neural Network

394

Torque ripple minimization in switched reluctance motor drives

395

Torque ripple minimization in switched reluctance motor drives by PWM current control

396

Torque ripple minimization in switched reluctance motor drives by PWM current control

397

Torque ripple minimization in switched reluctance motors using adaptive fuzzy control

398

Torque ripple minimization in switched reluctance motors using fuzzy-neural network inverse learning control

399

Torque ripple minimization in switched reluctance motors via bi-cubic spline interpolation

400

Torque ripple minimization in three phase induction motor by fuzzy logic controller based DTC-SVM

401

Torque ripple minimization of 8/6 Switched Reluctance Motor with fuzzy logic controller for constant dwell angles

402

Torque ripple minimization of a switched reluctance motor

403

Torque ripple minimization of a switched reluctance motor including mutual inductances via sliding mode control technique

404

Torque Ripple Minimization of BLDC Motor with Un-Ideal Back EMF

405

Torque ripple minimization of doubly salient permanent-magnet motors

406

Torque Ripple Minimization of Interior Permanent Magnet Brushless DC Motor Using Rotor Pole Shaping

407

Torque ripple minimization of Matrix Converter-fed PMSM drives using Model Predictive Torque Control

408

Torque ripple minimization of PMSM using PI type iterative learning control

409

Torque ripple minimization of reluctance synchronous machines by continuous and discrete rotor skewing

410

Torque ripple minimization of SMC drive for an innovative electric naval propulsion system

411

Torque ripple minimization of SRM using torque sharing function and hysteresis current controller

412

Torque Ripple Minimization of switched reluctance drives - A survey

413

Torque ripple minimization of switched reluctance machines through current profiling

414

Torque ripple minimization of switched reluctance motor using direct torque control based on sliding mode control

415

Torque Ripple Minimization of Switched Reluctance Motor Using Hysteresis Current Control

416

Torque ripple minimization of switched reluctance motor using modified torque sharing function

417

Torque ripple minimization of switched reluctance motors based on fuzzy logic and sliding mode control

418

Torque ripple minimization of switched reluctance motors by controlling the phase currents during commutation

419

Torque ripple minimization of switched reluctance motors through speed signal processing

420

Torque ripple minimization of Switched Reluctance Motors using speed signal based phase current profiling

421

Torque Ripple Minimization Strategy for Direct Torque Control of Induction Motors

422

Torque ripple minimization strategy for direct torque control of production motor

423

Torque ripple minimization technique in fractional-slot PM brushless machines

424

Torque Ripple Minimization Using Online Estimation of the Stator Resistances With Consideration of Magnetic Saturation

425

Torque ripple minimization via PWM control technique with GaN-based motor drive for high speed single phase brushless DC motor

426

Torque ripple minimization with current oriented method for switched reluctance motor

427

Torque ripple minimization with indirect position and speed sensing for switched reluctance motors

428

Torque ripple minimization with on-line parameter estimation using neural networks in permanent magnet synchronous motors

429

Torque ripple mitigation of double stator switched reluctance motor (DSSRM) using a novel rotor shape optimization

430

Torque ripple modeling of a permanent magnet synchronous motor

431

Torque ripple optimization in switched reluctance motor using two-phase model and optimization search technique

432

Torque ripple optimization of skewed IPM motor for field weakening operation

433

Torque Ripple Optimization of Switched Reluctance Motor Using Two-phase Model and Optimization Search Techniques

434

Torque ripple reducing in SRM based on winding function theory and 3D Finite Element Methods

435

Torque ripple reduction and fast torque response strategy of direct torque control for permanent-magnet synchronous motor

436

Torque ripple reduction based on current control for a flux switching permanent magnet machine

437

Torque ripple reduction by multi-layering technique in an interior permanent magnet motor used in hybrid electric vehicle

438

Torque ripple reduction control of a novel segment type SRM with 2-steps slide rotor

439

Torque Ripple Reduction Drive of Single-Phase SRM with PFC

440

Torque ripple reduction for brushless DC motor speed control system

441

Torque ripple reduction for interior permanent magnet machines using overlapping windings with fractional slot per pole pair

442

Torque ripple reduction for mutually coupled switched reluctance motor by bipolar excitations

443

Torque Ripple Reduction for Permanent Magnet Synchronous Motor Based on Learning Control

444

Torque ripple reduction in 12-slot 10-pole fractional slot permanent magnet synchronous motors with non-overlapping windings by implementation of unequal stator teeth widths

445

Torque Ripple Reduction in a DFIG-DC System by Resonant Current Controllers

446

Torque ripple reduction in a PMSM driven by direct torque control

447

Torque Ripple Reduction in an Axial Flux High Temperature Superconducting Motor

448

Torque ripple reduction in an axial-flux jigsaw-coil permanent magnet machine

449

Torque ripple reduction in an interior permanent-magnet synchronous motor for servo applications

450

Torque ripple reduction in BLDC motor velocity control systems using an optimal controller

451

Torque ripple reduction in BLDC motor with 120 degree conduction inverter

452

Torque Ripple Reduction in BLDC Torque Motor With Nonideal Back EMF

453

Torque Ripple Reduction in Brushless DC Drives Based on Reference Current Optimization Using Integral Variable Structure Control

454

Torque ripple reduction in brushless DC motor drives

455

Torque ripple reduction in brushless DC motor drives

456

Torque ripple reduction in brushless DC motor velocity control systems using a cascade modified model reference compensator

457

Torque Ripple Reduction in Brushless DC Motors Based on Model Predictive Control

458

Torque ripple reduction in direct torque control based induction motor drive using novel optimal controller design technique

459

Torque ripple reduction in direct torque control of induction machines by use of all voltage vectors of matrix converters

460

Torque ripple reduction in direct torque control of induction motor drives

461

Torque ripple reduction in direct torque controlled Brushless DC motor

462

Torque ripple reduction in double-layer 18/16 TC-PMSMs by adjusting teeth widths to minimize local saturation

463

Torque ripple reduction in DTC of induction motor driven by 3-level inverter with low switching frequency

464

Torque ripple reduction in DTC of induction motor driven by three-level inverter with low switching frequency

465

Torque ripple reduction in DTC of single-phase open-circuit fault PM brushless

466

Torque ripple reduction in five-phase direct torque controlled induction motor

467

Torque ripple reduction in five-phase induction machines using mixed winding configurations

468

Torque ripple reduction in fractional-slot Interior PM machines optimizing the flux-barrier geometries

469

Torque Ripple Reduction in Interior Permanent Magnet Synchronous Machines Using Stators With Odd Number of Slots Per Pole Pair

470

Torque Ripple Reduction in Interior Permanent Magnet Synchronous Machines Using the Principle of Mutual Harmonics Exclusion

471

Torque ripple reduction in interior permanent magnet synchronous machines with single-layer fractional slot concentrated windings

472

Torque ripple reduction in Permanent Magnet Synchronous Machines using angle-based iterative learning control

473

Torque ripple reduction in permanent magnet synchronous machines with concentrated windings and pre-wound coils

474

Torque ripple reduction in Permanent Magnet Synchronous Motor driven by field oriented control using Iterative Learning Control with space vector pulse width modulation

475

Torque ripple reduction in PMSM DTC drives using matrix converters

476

Torque ripple reduction in Reluctance Synchronous Machines using an asymmetric rotor structure

477

Torque Ripple Reduction in Sensorless PMSM Drives

478

Torque ripple reduction in switched reluctance motor drives using B-spline neural networks

479

Torque Ripple Reduction in Switched Reluctance Motor Drives Using B-Spline Neural Networks

480

Torque ripple reduction in the flux reversal motor by rotor pole shaping and stator excitation

481

Torque Ripple Reduction in Three-Phase Switched Reluctance Motors

482

Torque ripple reduction in three-stage brushless synchronous motor based on α-β-γ Filter

483

Torque ripple reduction method of permanent magnet synchronous motor by current sensor gain unbalance correction

484

Torque Ripple Reduction Method With Asymmetric Pole for Wound-Field Synchronous Motor

485

Torque ripple reduction methods for an interior permanent magnet synchronous generator

486

Torque ripple reduction methods for vector controlled induction motor with current preview control

487

Torque Ripple Reduction of a Direct-Drive Permanent-Magnet Synchronous Machine by Material-Efficient Axial Pole Pairing

488

Torque ripple reduction of a switched reluctance motor including mutual inductances

489

Torque ripple reduction of an interior PM synchronous motor for electronic power steering

490

Torque ripple reduction of axial flux permanent magnet synchronous machine with segmented and laminated stator

491

Torque ripple reduction of BLDC motors by modifying the non-commutating phase voltage

492

Torque ripple reduction of brushless DC motor based on optimal control with adaptive compensation

493

Torque ripple reduction of flux-switching machines with twisted-rotor structure

494

Torque ripple reduction of four-switch inverter fed permanent magnet brushless DC motor using hysteresis controller

495

Torque Ripple Reduction of Interior Permanent Magnet Synchronous Motor Using Harmonic Injected Current

496

Torque ripple reduction of interior permanent-magnet synchronous motor by pole-shoe shaping and skewing

497

Torque ripple reduction of model predictive torque control of induction motor drives

498

Torque ripple reduction of novel segment type Switched reluctance motor by increasing phase number

499

Torque ripple reduction of permanent magnet synchronous motor with non-sinusoidal back emf using a modified and simplified current optimization technique

500

Torque ripple reduction of PM synchronous motor for wide speed operating ranges

501

Torque ripple reduction of radial magnetic gearbox using axial pole pairing

502

Torque Ripple Reduction of Saliency-Based Sensorless Drive Concentrated-Winding IPMSM Using Novel Flux Barrier

503

Torque ripple reduction of SRM by optimization of current reference

504

Torque ripple reduction of SRM drives below the base speed using commutation angles control

505

Torque ripple reduction of SRM using advanced direct instantaneous torque control scheme

506

Torque ripple reduction of switched reluctance motor (SRM) drives, with emotional controller (BELBIC)

507

Torque ripple reduction of switched reluctance motor drive with adaptive sliding mode control and Particle Swarm Optimization

508

Torque ripple reduction of switched reluctance motor using PID fuzzy logic controller

509

Torque ripple reduction of switched reluctance motors by phase current optimal profiling

510

Torque ripple reduction of switched reluctance motors considering copper loss minimization

511

Torque ripple reduction of the modular Interior Permanent Magnet machines using optimum current profiling technique

512

Torque Ripple Reduction of the Torque Predictive Control Scheme for Permanent-Magnet Synchronous Motors

513

Torque ripple reduction of wound rotor synchronous motor using rotor slits

514

Torque ripple reduction strategy of model based predictive torque control for doubly salient permanent magnet synchronous machines

515

Torque ripple reduction technique with commutation time control for brushless DC motor

516

Torque ripple reduction technique with improved flux response for a direct torque control induction motor drive

517

Torque ripple reduction using magnet pole shaping in a surface mounted Permanent Magnet BLDC motor

518

Torque ripple RMS minimization in model predictive torque control of PMSM drives

519

Torque ripple suppression control for permanent magnet motors

520

Torque ripple suppression control for PM motor with current control based on PTC

521

Torque ripple suppression control for PM motor with high bandwidth torque meter

522

Torque ripple suppression in an interior permanent magnet synchronous motor

523

Torque Ripple Suppression in Flux-Switching PM Motor by Harmonic Current Injection Based on Voltage Space-Vector Modulation

524

Torque ripple suppression of DFIG under unbalanced grid voltage conditions using reduced-order generalized integrators

525

Torque ripple suppression of permanent magnet synchronous motors considering total loss reduction

526

Torque ripple suppression of surface mounted permanent magnet synchronous motor using harmonic injected currents

527

Torque ripple tester for a permanent magnet synchronous motor

528

Torque Ripple Verification in PM Machines

529

Torque Ripple-Free Operation of PM BLDC Drives With Petal-Wave Current Supply

530

Torque ripples and EMI noise minimization in PMSM using hybrid filter

531

Torque ripples and estimation performance of high frequency signal injection based sensorless PMSM drive strategies

532

Torque ripples control and speed regulation of Permanent magnet Brushless dc Motor Drive using Artificial Neural Network

533

Torque ripples due to positioning errors of Hall sensors and armature windings for PWM permanent magnent brushless dc motors

534

Torque ripples in stepping motor driven systems

535

Torque Ripples Minimization in PMSM using Variable Step-Size Normalized Iterative Learning Control

536

Torque ripples reduction in PM synchronous motor using frequency-domain iterative learning control

537

Torque ripples reduction of five-phase PMSM using fractional order regulator

538

Torque Ripples Suppression for Six-Phase Induction Motors Under Open Phase Faults

539

Torque Saturation in Bipedal Robotic Walking Through Control Lyapunov Function-Based Quadratic Programs

540

Torque Sensing from Harmonic Drives by Using Three Strain Gages

541

Torque sensing of finger joint using strain-deformation expansion mechanism

542

Torque sensing of finger joint using strain-deformation expansion mechanism

543

Torque sensor based electrically assisted hybrid rickshaw-van with PV assistance and solar battery charging station

544

Torque sensor based robot arm control using disturbance observer

545

Torque sensor calibration using virtual load for a manipulator

546

Torque Sensor Free Power Assisted Wheelchair

547

Torque Sensor Using Amorphous Star-Shaped Core Magnetic Field Sensor

548

Torque sensor using perpendicularly magnetizing coil

549

Torque sensor using perpendicularly magnetizing coils

550

Torque sensorless control in multidegree-of-freedom manipulator

551

Torque sensorless control of a human-electric hybrid bicycle

552

Torque sensorless control of induction motor

553

Torque sensor-less tactile control of electro-rheological passive actuators

554

Torque Sensors for Induction Motors Using Amorphous Microcore Field Sensors

555

Torque sensors using wire explosion magnetostrictive alloy layers

556

Torque Setpoint Tracking for Parallel Hybrid Electric Vehicles Using Dynamic Input Allocation

557

Torque shaping control for initial unstable passive dynamic walker

558

Torque sharing between V/F controlled vehicular wheels under slippery ground conditions

559

Torque smoothing control of wind turbine generator system using individual pitch control

560

Torque speed characteristic of polyphase permanent magnet motors with one phase fault

561

Torque steering control of 4-wheel drive electric vehicle

562

Torque stress for generators connected to medium voltage distribution systems

563

Torque tracking control of a haptic master featuring controllable magnetorheological fluid

564

Torque tracking control of permanent magnet synchronous in-wheel motor for electric vehicle

565

Torque tracking control of turbocharged gasoline engine using nonlinear MPC

566

Torque tracking strategy for antislip control in railway traction systems with common supplies

567

Torque trajectory controller for induction motor

568

Torque trajectory tracking control of IM for EV´s

569

Torque transducers with stress-sensitive amorphous ribbons of chevron-pattern

570

Torque transfer characteristics of the flexible shafts for movement mechanism of a crawler-type rescue robot

571

Torque transient alleviation in fixed speed wind generators by Indirect Torque Control with STATCOM

572

Torque Transmissibility Assessment for Automotive Dry-Clutch Engagement

573

Torque transmission mechanism with nonlinear passive stiffness using mechanical singularity

574

Torque vectoring for an electric vehicle using an LPV drive controller and a torque and slip limiter

575

Torque vectoring for rear axle using Adaptive Sliding Mode Control

576

Torque Vectoring with a feedback and feed forward controller - applied to a through the road hybrid electric vehicle

577

Torque Vibrations on the Mechanism of Wind Turbine Generators Excited by Balanced Network Faults

578

Torque, FMR and domain mode FMR relations in thin "Oblique anisotropy axis" films

579

Torque, power, losses and heat calculation of a transverse flux reluctance machine with soft magnetic composite materials and disc-shaped rotor

580

Torque, Power, Losses, and Heat Calculation of a Transverse Flux Reluctance Machine With Soft Magnetic Composite Materials and Disk-Shaped Rotor

581

Torque, Speed, and Position Control of Induction Machines Using the DQ Model

582

Torque, Voltage, and CurrentHr rmonics of SynchronousMachines

583

Torque/current ratio improvement and vibration reduction of switched reluctance motors using multi-stage structure

584

Torque/current ratio improvement of reluctance motor under consideration of teeth design and current waveform

585

Torque/force control of wave system based on reflected wave rejection and wave-based load disturbance observer

586

Torque/power rating design of an IPM machine for maximum profit-to-cost ratio in wind power generation

587

Torque-Angle Analysis of the Schrage Motor

588

Torque-Angle Characteristics of Synchronous Machines Following System Disturbances

589

Torque-angle characteristics of synchronous machines following system disturbances

590

Torque-angle relationships of human wrist muscles

591

Torque-Angle-Oriented Control of Induction Machines

592

Torque-Assist Hybrid Electric Powertrain Sizing: From Optimal Control Towards a Sizing Law

593

Torque-based control of whirling motion in a rotating electric machine under mechanical resonance

594

Torque-based multi-task and balancing control for humanoid robots

595

Torque-based power and optimal voltage calculating method of asynchronous motor

596

Torque-based recursive filtering approach to the recovery of 3D articulated motion from image sequences

597

Torque-bias profile for improved tracking of the Deep Space Network antennas

598

Torque-control based compliant actuation of a quadruped robot

599

Torque-dependent compliance control in the joint space of an operational robotic machine for motor therapy

600

Torque-Energy Relations in Induction Machines [includes discussion]

601

Torque-limited path following by online trajectory time scaling

602

Torque-Maximizing Design of Double-Stator, Axial-Flux, PM Machines Using Simple Non-Linear Magnetic Analysis

603

Torque-maximizing field-weakening control: design, analysis, and parameter selection

604

Torquemeter on sites of gyrodines

605

Torque-operated microwave wattmeter

606

Torque-oriented control of an homogeneous charge compression ignition vehicle

607

Torque-oscillations damping in micro-cogeneration units with high brake mean pressure engines and PM-brushless generators

608

Torque-position transformer for task control of position controlled robots

609

Torque-Power-Speed Hybrid Control of Marine Electric Propulsion System

610

Torque-pulsation reduction in five-phase induction-machine drive

611

Torquer and hinge design for dry tuned-rotor gyroscopes

612

Torque-resistant laser welded cylinders

613

Torque-ripple in AC switched reluctance generators

614

Torque-Ripple Minimization and Fast Dynamic Scheme for Torque Predictive Control of Permanent-Magnet Synchronous Motors

615

Torque-ripple minimization in dc-brushless drives using a predictive control technique adapted to generic air-gap flux-density distribution

616

Torque-ripple minimization in modular permanent-magnet brushless machines

617

Torque-ripple minimization in switched reluctance machines over a wide speed range

618

Torque-ripple minimization in switched reluctance motors using adaptive fuzzy control

619

Torque-ripple minimization in switched reluctance motors using sliding mode variable structure control

620

Torque-Ripple Minimization of Switched Reluctance Machines Through Current Profiling

621

Torque-ripple minimization with indirect position and speed sensing for switched reluctance motors

622

Torque-Ripple Mitigation for Brushless DC Machine Drive System Using One-Cycle Average Torque Control

623

Torque-ripple reduction in PM synchronous motor drives using repetitive current control

624

Torque-Ripple Reduction in Switched Reluctance Motor Drive Using SHRFNN Control

625

Torque-speed characteristic determination of an excited doubly salient machine (DSPM)

626

Torque-Speed Characteristics Analysis of a Magnetic-Geared Motor Using Finite Element Method Coupled With Vector Control

627

Torque-Speed Characteristics of Interior-Magnet Machines in Brushless AC and DC Modes, with Particular Reference to Their Flux-Weakening Performance

628

Torque-speed characteristics of superconducting synchronous reluctance motors with DyBCO bulk in the rotor

629

Torque-speed curve of the Na⁺-driven flagellar motor of Vibrio alginolyticus

630

Torque-speed performance analysis of fractional slot PM machines having concentrated windings using alternate methods

631

Torque-to-weight ratio improvement with soft magnetic composite material in high speed switched reluctance motor

632

Torque-to-weight ratio maximization in PMSM using topology optimization

633

Torque-vectoring control in fully electric vehicles via integral sliding modes

634

Torque-vectoring stability control of a four wheel drive electric vehicle

635

Torque-Vectoring-Based Vehicle Control Robust to Driver Uncertainties

636

Torque-velocity control algorithm for on-line obstacle avoidance for mobile manipulators

637

Torrefied wood field tests at a coal-fired power plant

638

TorrentLab: investigating BitTorrent through simulation and live experiments

639

Torrents on Twitter: Explore Long-Term Social Relationships in Peer-to-Peer Systems

640

Torrentzshare: Search and recommendation of torrents

641

Torsades de Pointes: A Characteristic Spectral Pattern in Sudden Cardiac Death

642

Torsadogenic drug-induced increased short-term variability of JT-area

643

TORSCHE Scheduling toolbox for Matlab

644

TORSIM: An efficient fault simulator for synchronous sequential circuits

645

Torsion and strain analysis of left ventricular wall at ejection period by using optical-flow

646

Torsion and stress in amorphous positive magnetostrictive wires

647

Torsion behavior simulation of Ni-coating SWCNT based on molecular dynamics

648

Torsion effects in a helix nanowire with easy-tangential anisotropy

649

Torsion Limits and Riemann-Roch Systems for Function Fields and Applications

650

Torsion MACCEPA: A novel compact compliant actuator designed around the drive axis

651

Torsion of an eccentrically two-phase circular nanobar

652

Torsion sensing characteristics of fibre ring laser based on nonlinear polarisation rotation

653

Torsion Sensing Characteristics of Mechanically Induced Long-Period Holey Fiber Gratings

654

Torsion sensor with an Yb-doped photonic crystal fiber based on a Mach-Zehnder Interferometer

655

Torsion Vibration Analysis of Lead-screw Feed Drives with Changeable Table Position and Work-piece Mass

656

Torsional Acoustic Modes in a Clad Rod

657

Torsional acoustic waveguide sensor for temperature and liquid level

658

Torsional analysis and coupling selection for electric machine coupled to reciprocating equipment

659

Torsional Analysis and Stress Consideration of Gearing and Transmission as Related to Mills in a Cement Plant

660

Torsional behaviour of large synchronous machines during asynchronous start-up and system disturbances

661

Torsional cavity optomechanical nano-seesaw system

662

Torsional Coordination of High Speed Synchronous Motors-Part I

663

Torsional Coordination of High Speed Synchronous Motors-Part II

664

Torsional delayed resonator with velocity feedback

665

Torsional dependence of second harmonic amplitude of giant magnetoimpedance in FeCoSiB amorphous wire

666

Torsional dependence of second-harmonic amplitude of giant magnetoimpedance in FeCoSiB amorphous wire

667

Torsional dynamics compensation enhances robotic control of tip-steerable needles

668

Torsional dynamics of AC electrical machines and systems

669

Torsional Dynamics of Closely Coupled Turbine-Generators

670

Torsional dynamics of generator-units during autonomous operation

671

Torsional Dynamics of Steerable Needles: Modeling and Fluoroscopic Guidance

672

Torsional eigenfrequency identification of squirrel cage rotors of induction motors

673

Torsional fatigue life prediction method for DRAM module

674

Torsional Fatigue of Turbine-Generator Shafts Caused by Different Electrical System Faults and Switching Operations

675

Torsional fatigue of turbine-generator shafts owing to network faults

676

Torsional force probes optimized for higher order mode suppression

677

Torsional Free Vibration Characteristics of Hybrid Clinched Joints

678

Torsional Impulse in Gun Launched Projectiles

679

Torsional inchworm ultrasonic piezomotor combining continuous rotation with precise control over angular positions and high torque output

680

Torsional interaction between an SSSC and a PSS in a series compensated power system

681

Torsional interaction between nonidentical turbine generators

682

Torsional interaction studies on a power system compensated by SSSC and fixed capacitor

683

Torsional Interaction Studies on a Power System Compensated by SSSC and Fixed Capacitor

684

Torsional interaction studies on a series compensator based on solid-state synchronous voltage source

685

Torsional interactions between an electrical arc furnace load and a turbine-generator set

686

Torsional Interactions Between Synchronous Generators and Long Transmission Lines

687

Torsional Interactions between Synchronous Generators and Long Transmission Lines

688

Torsional kinematic model for concentric tube robots

689

Torsional mechanical filters at 500 kHz

690

Torsional mirror driven by a cantilever beam integrated with 1×10 individually biased PZT array actuator for VOA application

691

Torsional mirror with an electrostatically driven lever-mechanism

692

Torsional mirror with X-shaped cross-sectional torsional beam

693

Torsional Model Identification for Turbine-Generators

694

Torsional Model Identification for Turbine-Generators

695

Torsional modes in piezo helical springs

696

Torsional natural frequencies in the superconducting turbogenerator

697

Torsional oscillations associated with the starting of three phase synchronous motors from a single phase supply

698

Torsional oscillations in drive systems

699

Torsional Oscillations of Series Capacitor Compensated AC/DC Systems

700

Torsional oscillations of series capacitor compensated AC/DC systems

701

Torsional oscillations of the turbine-generator due to network faults

702

Torsional oscillations of unequally-loaded parallel identical turbine-generators

703

Torsional Oscillations of Unequally-Loaded Parallel Identical Turbine-Generators

704

Torsional Performance of Turbine Generator Shafts Especially Under Resonant Excitation

705

Torsional Performance of Turbine Generator Shafts Especially Under Resonant Excitation

706

Torsional piezoelectric fiber for viscosity measurement of Newtonian fluids

707

Torsional Piezoresistive Effect in Polysilicon

708

Torsional resonance active damping in grid tied wind turbines with gearbox, DFIG, and power converters

709

Torsional Resonance Risk Management in Islanded Industrial Power Systems Supplying Large VFDs

710

Torsional Resonance Risk Management in Islanded Industrial Power Systems Supplying Large VFDs

711

Torsional resonance suppression via pida controller

712

Torsional rod wave scattering from tapering between regions of different cross-sections

713

Torsional rod waves in tapered regions

714

Torsional sensor applications in two-phase fluids

715

Torsional stability of bundle conductors

716

Torsional Stability of Hydropower Units Under Influence of Subsynchronous Oscillations

717

Torsional stiffness and fatigue study of surface-mounted compliant leaded systems

718

Torsional stiffness and fatigue study of surface-mounted compliant leaded systems

719

Torsional stress analysis ofsquirrel cage windings of asynchronous motors

720

Torsional Studies Of Autologous Distally Based Iliotibial Band Grafts

721

Torsional system parameter identification of turbine-generator sets

722

Torsional torque suppression of decentralized generators using H∞ observer

723

Torsional torque suppression of decentralized generators using H∞ observer

724

Torsional torque suppression of decentralized generators using H∞ observer with parameter identification

725

Torsional torque suppression of decentralized generators using LQR obsever with parameter identification

726

Torsional torques of big turbine-generator shafts due to malsynchronization

727

Torsional transfer function of the elastic single-mass system

728

Torsional ultrasonic waveguide sensor

729

Torsional Vibration Analysis and Comprehensive Field Testing on a Large Rotary Kiln

730

Torsional Vibration Analysis of 16V240ZJ Diesel Engine Based on Virtual Prototype Technology

731

Torsional vibration analysis of a geared transmission system of a large scale lathe under gravitational unbalancing torque

732

Torsional vibration analysis of a high-speed internal turbine-gearbox using a transfer matrix method

733

Torsional vibration analysis of Fastening structure based on finite element method

734

Torsional Vibration and Fatigue of Turbine-Generator shafts

735

Torsional Vibration and Fatigue of Turbine-Generator Shafts

736

Torsional vibration assessment in railway traction system mechanical transmission

737

Torsional Vibration Assessment Using Induction Machine Electromagnetic Torque Estimation

738

Torsional vibration calculation and analysis of tube mills

739

Torsional vibration control of large induction motors using constant air gap flux scheme

740

Torsional vibration control of MDOF systems using the Centrifugal Delayed Resonator

741

Torsional Vibration Effects on Induction Machine Current and Torque Signatures in Gearbox-Based Electromechanical System

742

Torsional vibration in large variable speed drive systems: Origin and mitigation methods

743

Torsional vibration in the diesel-electric set

744

Torsional vibration measuring model of spanless points of drive system

745

Torsional vibration monitoring using induction machine electromagnetic torque estimation

746

Torsional vibration of misaligned shafting driven by universal joint during transient process

747

Torsional vibration of quartz crystal beams with static axial loads and its application to sensors

748

Torsional Vibration Problems and Analyses of Cement Industry Drives

749

Torsional vibration resulting from adjustable-frequency AC drives

750

Torsional Vibration Signal Simulation and Analysis of Dual-mass Flywheel Based on LabVIEW

751

Torsional vibration suppression control in 2-mass system by state feedback speed controller

752

Torsional Vibration Suppression Control in the Main Drive System of Rolling Mill by State Feedback Speed Controller Based on Extended State Observer

753

Torsional vibration suppression of a 2-mass main drive system of rolling mill with KF enhanced pole placement

754

Torsional vibration suppression of a twin-drive geared system using model-based control

755

Torsional vibration suppression of drive system based on DMC method

756

Torsional Vibration Suppression of Rolling Mill with Constrained Model Predictive Control

757

Torsional vibration suppression of ship elevator

758

Torsional vibration suppression of the PMSG-based wind turbine generator using H∞ observer

759

Torsional Vibrations in Synchronous Motor-Geared-Compressor Drives

760

Torsional vibrations of circular elastic plates with thickness steps

761

Torsional vibrations of quartz crystal beams

762

Torsional vibrations of quartz crystal beams

763

Torsional Vibrations of Quartz Crystal Beams

764

Torsional wave propagation in a circumferentially poled piezoelectric cylindrical transducer with unattached electrodes

765

Torsional wave transduction using obliquely-bonded magnetostrictive nickel strips in cylinders

766

Torsional Waves in a Sapphire Rod at Low Frequencies

767

Torsional-mode magnetostrictive delay-line device

768

Torsional-Vibration Assessment and Gear-Fault Diagnosis in Railway Traction System

769

Torsion-free photonic crystal pressure sensor array using novel piston-type resonator array

770

Torsion-mirror actuators with compound electrostatic driving structures

771

Torso and heart dimensions of cardiac SPECT patients

772

Torso Detection in Static Images

773

Torso Inclination Enables Faster Walking in a Planar Biped Robot With Passive Ankles

774

Torso rotation for push recovery using a simple change of variables

775

Torso-based tactile feedback system for patients with balance disorders

776

Tortuosity and elasticity study of distal radius trabecular bone

777

Tortuosity as a metric for evaluating branch motion paths under dynamic loading

778

Tortuosity effects on longitudinal and transverse plane wave propagation in a two-dimensional model of ventricular tissue

779

Torus and Other Networks as Communication Networks With Up to Some Hundred Points

780

Torus bifurcation and chaos in power systems

781

Torus birth and destruction in an autonomous piecewise-smooth system

782

Torus birth bifurcations in a DC/DC converter

783

Torus CLAS12-Superconducting Magnet Quench Analysis

784

TORUS concept machines: pre-prototyping design assessment for two major topologies

785

Torus data center network with smart flow control enabled by hybrid optoelectronic routers [Invited]

786

Torus doubling and hyperchaos in a five dimensional hysteresis circuit

787

Torus nano-antenna: Enhanced field and radiation pattern

788

Torus Networking for Exascale Cloud Storage System

789

Torus omnidirectional driving unit mechanism realized by curved crawler belts

790

Torus problems in jointly-connected no-beacon networks

791

Torus quorum system and difference set-based rendezvous in Cognitive Radio Ad Hoc Networks

792

Torus with slotted rings architecture for a cache-coherent multiprocessor

793

TORUS: terabit-per-second ATM switching system architecture based on distributed internal speed-up ATM switch

794

Torus-Based Compression by Factor 4 and 6

795

Torus-Bifurcation Mechanisms in a DC/DC Converter With Pulsewidth-Modulated Control

796

Torus-doubling bifurcations in four mutually coupled Chua´s circuits

797

Torus-ring-bus connected highly parallel processor

798

TORUS-switch: a scalable internal speed-up ATM switch architecture and its 5 Gbit/s switch LSI

799

TORUS-switch: scalable Tb/s ATM switch architecture based on the internal speed-up ATM switch

800

Torus-Topology Data Center Network Based on Optical Packet/Agile Circuit Switching with Intelligent Flow Management

801

TorusVis^ND: Unraveling High-Dimensional Torus Networks for Network Traffic Visualizations

802

TorWard: Discovery of malicious traffic over Tor

803

TorWard: Discovery, Blocking, and Traceback of Malicious Traffic Over Tor

804

Torwards a fully-integrated CMOS microcalorimeter with on-chip quasi-digital output signal

805

Torwards a general formulation for over-sampling and under-sampling

806

Torwards marketable efficiency solution-processed kesterite and chalcopyrite photovoltaic devices

807

Torwards uncertainty optimization in active SLAM

808

Tory II-C Nuclear Instrumentation System

809

TOSCA Calculations and Measurements for the SLAC SLC Damping Ring Dipole Magnet

810

TOSCA: a simulator for oversampling converters with behavioural modeling

811

TOSCA: a simulator for switched-capacitor noise-shaping A/D converters

812

TOSCA: a user-friendly behavioural simulator for oversampling A/D converters

813

TOSCA: Total Scan Power Reduction Architecture based on Pseudo-Random Built-in Self Test Structure

814

TOSCANE: TOwards SCalable audiovisual communication networks

815

ToSG 2014 Workshop Committee

816

Toshiba develops 1 Mbit VSRAM

817

Toshiba develops new CT system

818

Toshiba first with 1 Mbit DRAM

819

Toshiba IEEE 1149.1 (JTAG) development summary

820

Toshiba reveals its memories

821

Toshiba´s Strategy in Semiconductor Business and Production Technology

822

Toshiharu Sugie [People in Control]

823

T-OSN: A Trust Evaluation Model in Online Social Networks

824

TosNet: An easy-to-use, real-time communications protocol for modular, distributed robot controllers

825

TOSS: TONICS for operation support systems: system management using the world wide web and intelligent software agents

826

TOSS: Traffic offloading by social network service-based opportunistic sharing in mobile social networks

827

Tossing manipulation by 1 degree-of-freedom manipulator

828

Tossing NoSQL-Databases Out to Public Clouds

829

ToSS-it: A Cloud-Based Throwaway Spatial Index Structure for Dynamic Location Data

830

TOSSMA: A Tenant-Oriented SaaS Security Management Architecture

831

TOSSTI: Saving Time and Energy in TinyOS with Software Thread Integration

832

TOT_AL: An ASIC for TOF and DOI measurement

833

TOT02, a time-over-threshold based readout chip in 180 nm CMOS process for long silicon strip detectors

834

Total 8-connectivity on the square raster

835

Total Aberrations Measurement with Using the Mathematical Model of the Eye

836

Total absorption by a low-loss dielectric thin layer on top of a metallic metasurface

837

Total Absorption of Electromagnetic Waves in Ultimately Thin Layers

838

Total AC Loss Characteristics in a Stacked YBCO Conductor

839

Total AC Loss in Twisted Multifilamentary Coated Conductors Carrying AC Transport Current in AC Transverse Magnetic Field

840

Total accuracy of the whole measuring chain — Sensor & IED

841

Total active area silicon photodiode array

842

Total ADS: Automated Software Anomaly Detection System

843

Total Airgap Flux Minimization in Dual Stator Winding Induction Machines

844

Total Air-gap flux minimization in dual stator winding induction machines

845

Total airport and airspace model (TAAM) parallelization combining sequential and parallel algorithms for performance enhancement

846

Total analysis of radiation characteristics of electric dipole with rectangular screen

847

Total and Incremental Losses in Power Transmission Networks

848

Total and Partial Fragmentation Cross-Section of 500 MeV/nucleon Carbon Ions on Different Target Materials

849

Total and Peak Energy Consumption Minimization of Building HVAC Systems Using Model Predictive Control

850

Total and reduced magnetic vector potentials and electrical scalar potential for eddy current calculation

851

Total and Scattered Field Formulations in the Transfinite Element Method

852

Total- and scattered-field decomposition technique for the finite-element time-domain method

853

Total- and scattered-field decomposition technique for the finite-element time-domain modeling of buried scatterers

854

Total Angle Resolved Scattering Characterization for Ultra-fine Finished Surface Areal-Topography

855

Total apparent power of the electrical system for periodic, deformed waveforms

856

Total area radio coverage in Orange County, California using the simulcasting technique

857

Total arterial compliance is a major determinant of peak oxygen uptake

858

Total Assessment and Optimization of Telecommunication Sectors by Multivariate Approach

859

Total atmospheric absorption at 22.2 GHz

860

Total atmospheric absorption of fixed satellite communication signal due to oxygen and water vapor in Nigeria

861

Total automation: Impacts & systems

862

Total automation: Impacts & systems

863

Total backscatter from conducting rectangular corrugations

864

Total Bacterial Count in Soft-Frozen Dairy Products by Impedance Biosensor System

865

Total Bimagic labeling and Total Magic Cordial labeling of Paley digraphs

866

Total body composition measurement by using bioelectric impedance analysis and its impact on obesity

867

Total body infrared imaging and postural disorders

868

Total body water content observations using cavity - perturbation techniques

869

Total Bregman Divergence and Its Applications to DTI Analysis

870

Total Bregman divergence and its applications to shape retrieval

871

Total C and I refurbishment of a 4×500 MW coal fired power station for improved flexible operation using a touch screen based control desk

872

Total cable EM environmental protection using an internally protected universal ground adapter (IPUGA)

873

Total capacities of and maximum numbers of users in strictly bandlimited CDMA and FDMA Gaussian channels

874

Total capacity in a shared CDMA LEOS environment

875

Total capacity management using simulation

876

Total charge capacitor model for short-channel MESFETs

877

Total charge injection cancellation scheme for high precision second-generation switched-current circuits

878

Total charge theorem for directional couplers and Z-matched coupled lines

879

Total circulatory support during CPR by vest inflation

880

Total Coloring Schemes and Algorithms of Regular Planar Meshes

881

Total Colorings of Planar Graphs with Maximum Degree Seven and without 3-Cycles Adjacent to 4-Cycles

882

Total Compensation and How it is Used in an Organization´s Human Resources Strategy

883

Total compensation of line-side switching harmonics in converter-fed AC locomotives

884

Total compensation of line-side switching harmonics in converter-fed AC locomotives

885

Total concurrency and uncertainty in linguistic geometry

886

Total contamination control: the minienvironment era

887

Total control of fast coordinate measuring machines

888

Total Control with LMI Forth™ [advertisement]

889

Total Control with LMI Forth™ [advertisement]

890

Total Control with LMI Forth™ [advertisement]

891

Total Control with LMI Forth™ [advertisement]

892

Total Control: [advertisement]

893

Total Control: [advertisement]

894

Total Control: [advertisement]

895

Total Control: [advertisement]

896

Total Control: [advertisement]

897

Total cost comparison of Next Generation Optical Access Networks with node consolidation

898

Total cost effective scallop free Si etching for 2.5D & 3D TSV fabrication technologies in 300mm wafer

899

Total Cost Modeling and Systemic, Strategic Methods for Purchasing Cost Decision and Management

900

Total Cost of Ownership and Risk Analysis of Collaborative Implementation Models for Integrated Fiber-Wireless Smart Grid Communications Infrastructures

901

Total cost of ownership comparison between single and mixed line rate networks

902

Total cost of ownership of WDM and switching architectures for next-generation 100Gb/s networks

903

Total cost of ownership: issues around reducing cost of support in a manufacturing organization case

904

Total cource locomotion control of assist walking exoskeleton leg

905

Total coverage based regression test case prioritization using genetic algorithm

906

Total cross section measurement of Dy in the energy region 0.01 eV~10 keV

907

Total Cross Sections and Impact-Parameter Dependence of X-Ray Production in Ion-Atom Collisions

908

Total current collapse in high-voltage GaN MIS-HEMTs induced by Zener trapping

909

Total current harmonic distortion analyses of industrial UPS´s with SCR input converter working in redundant mode

910

Total Curve Analysis of Regional Cerebral Blood Flow with 133Xe Inhalation: Description of Method and Values Obtained with Normal Volunteers

911

Total customer satisfaction [telecommunication products]

912

Total Customer Service Thinking: Application Research in Resource-based Industries ----Take Coal Enterprises as Example

913

Total cycle time management by operational elements

914

Total Daily Solar Irradiance Prediction using Recurrent Neural Networks with Determinants

915

Total DC Integrated Data Centers

916

Total delay compensation in LAN control systems and implications for scheduling

917

Total dermoscopy score calculation using quantitative measurements in digital dermoscopy

918

Total design and concept selection

919

Total Design of an FPGA-Based Brain–Computer Interface Control Hospital Bed Nursing System

920

Total design of high-speed counters: Process to subsystem

921

Total destruction of PCB transformers

922

Total deviation assessment with data preprocessing

923

Total dielectric isolation (TDI) of silicon device islands by a single O⁺ implantation stage

924

Total diesel emission control system using ozone injection and plasma desorption

925

Total differential optical properties of polymer nanocomposite materials

926

Total Differentiation

927

Total digital ASIC control for an induction motor drive

928

Total digital studio system in broadcasting station

929

Total dispersion in step-index monomode fibres

930

Total dose γ-ray irradiation characteristics of CMOS inverters fabricated on SIMOX and BESOI wafers

931

Total Dose and Bias Temperature Stress Effects for HfSiON on Si MOS Capacitors

932

Total dose and displacement damage effects in a radiation-hardened CMOS APS

933

Total Dose and Dose Rate Radiation Characterization of a Hardened EPI-CMOS Gate Array

934

Total Dose and Dose Rate Radiation Characterization of EPI-CMOS Radiation Hardened Memory and Microprocessor Devices

935

Total Dose and Dose Rate Response of an AD590 Temperature Transducer

936

Total Dose and Dose Rate Response of Low Dropout Voltage Regulators

937

Total dose and heavy ion evaluation of a hardened RISC microcontroller

938

Total dose and heavy ions evaluation of UC1806 pulse width modulator from Unitrode

939

Total dose and proton damage in optocouplers

940

Total dose and proton testing of a commercial HgCdTe array

941

Total dose and RT annealing effects on startup current transient in antifuse FPGA

942

Total Dose and SEE Testing of the Intersil ISL75052SEH Low Dropout Regulator

943

Total Dose and Single Event Effect Characterization of ECL Devices

944

Total dose and single event effects testing of the Intel pentium III (P3) and AMD K7 microprocessors

945

Total dose and single event effects testing of the Intersil ISL70003SEH integrated point of load converter

946

Total Dose and Single Event Effects Testing of the Intersil ISL70444SEH Hardened Operational Amplifier

947

Total Dose and Single Event Effects Testing of the Intersil ISL71090SEH and ISL71091SEH Precision Voltage References

948

Total dose and single event effects testing of UTMC commercial RadHard^TM gate arrays

949

Total Dose and Single Event Testing of a Hardened Point of Load Regulator

950

Total Dose and Single Event Testing of a Hardened Single-Ended Current Mode PWM Controller

951

Total dose and single event testing of the Intersil ISL70227RH low-noise operational amplifier

952

Total Dose and Single Event Testing of the Intersil ISL75051SRH Low Dropout Regulator

953

Total Dose and Single Event Transients in Linear Voltage Regulators

954

Total Dose and Single Event Transients in Linear Voltage Regulators

955

Total dose and transient radiation effects on GaAs MMICs

956

Total Dose and Transient Response of SiGe HBTs from a New 4th-Generation, 90 nm SiGe BiCMOS Technology

957

Total dose behavior of partially depleted SOI dynamic threshold voltage MOS (DTMOS) for very low supply voltage applications (0.6-1 V)

958

Total dose behavior of partially depleted SOI dynamic threshold voltage MOS (DTMOS) for very low supply voltage applications (0.6-1 V)

959

Total dose bias dependency and ELDRS effects in bipolar linear devices

960

Total dose characterization of a CMOS technology at high dose rates and temperatures

961

Total dose characterization of the PACE 1750A microprocessor chipset

962

Total Dose Characterizations of CMOS Devices in Oxygen Implanted Silicon-on-Insulator

963

Total dose correlation of 4007 devices flown on the CRRES MEP experiment

964

Total dose degradation of low-dropout voltage regulators

965

Total dose degradation of MEMS optical mirrors

966

Total dose dependence of hot carrier injection effect in the NMOS devices

967

Total dose dependence of soft-error hardness in 64 kbit SRAMs evaluated by single-ion microprobe technique

968

Total dose effect measurement systems for spacecraft and the calibration method

969

Total dose effect on ferroelectric PZT capacitors used as non-volatile storage elements

970

Total Dose Effect on the Propagation of Single Event Transients in a CMOS Inverter String

971

Total dose effect on the propagation of single event transients in a CMOS inverter string

972

Total dose effects and SEE screening on MEMS COTS accelerometers

973

Total Dose Effects at Low Dose Rates

974

Total dose effects in a linear Voltage regulator

975

Total Dose Effects in CMOS Trench Isolation Regions

976

Total dose effects in composite nitride-oxide films

977

Total dose effects in conventional bipolar transistors and linear integrated circuits

978

Total dose effects in op-amps with compensated input stages

979

Total Dose Effects in Op-Amps With Compensated Input Stages

980

Total Dose Effects in Recessed Oxide Digital Bipolar Microcircuits

981

Total Dose Effects in the 54HC Family of Microcircuits

982

Total Dose Effects in Tunnel-Diode Body-Contact SOI $n$ MOSFETs

983

Total Dose Effects of Ionizing Radiation on MOS Structures at 90Â°K

984

Total dose effects on 0.15μm FD-SOI CMOS transistors

985

Total Dose Effects on a FD-SOI Technology for Monolithic Pixel Sensors

986

Total dose effects on a FD-SOI technology for monolithic pixel sensors

987

Total dose effects on a fully-depleted SOI NMOSFET and its lateral parasitic transistor

988

Total dose effects on a fully-depleted SOI NMOSFET and its lateral parasitic transistor

989

Total dose effects on ATLAS-SCT front-end electronics

990

Total Dose Effects on Bipolar Integrated Circuits at Low Temperature

991

Total dose effects on bipolar integrated circuits: characterization of the saturation region

992

Total dose effects on buried oxide breakdown

993

Total Dose Effects on Circuit Speed Measurements

994

Total dose effects on double gate fully depleted SOI MOSFETs

995

Total dose effects on elementary transistors of a comparator in bipolar technology

996

Total Dose Effects on Error Rates in Linear Bipolar Systems

997

Total dose effects on error rates in linear bipolar systems

998

Total dose effects on gate controlled lateral PNP bipolar junction transistors

999

Total dose effects on Microelectromechanical Systems (MEMS): accelerometers

1000

Total dose effects on negative voltage regulator

بازگشت