<< مقالات لاتين فني مهندسي >>
<< بر اساس عنوان >>
1
In-silico conditioning of microRNA to identify potential biomarkers from serum for pancreatic cancer
2
Insilico Docking Studies on Anticancer Drugs for Breast Cancer
3
In-Silico Effects of Mg2+ Diffusion Rates on Stochastic Event Based Simulation of the PhoPQ System
4
In-silico evaluation of β-adrenergic effects on the Long-QT syndrome
5
In-silico evaluation of cortical porosity by tangential axial transmission
6
In-silico hyperthermia performance of a near-field patch antenna at various positions on a human body model
7
In-Silico Modeling of Glycosylation Modulation Dynamics in hERG Ion Channels and Cardiac Electrical Signals
8
In-silico organogenesis: Image-driven modelling of limb development
9
In-silico Phantom Axon: Emulation of an Action Potential Propagating Along Artificial Nerve Fiber
10
In-silico prediction of surface residue clusters for enzyme-substrate specificity
11
Insilico reaction kinetic model of shear stress induced eNOS activation in arterial endothelium
12
In-Silico Visualization of Immune Response
13
InSilico-ChIP: A Coregulation and Evolutionary Conservation Based Transcription Factor and Target Gene Predictor
14
In-simulator assessment of trade-offs arising from mixture of color cuing and monocular, binoptic, and stereopsis cuing information
15
Insist on educating people to be people-oriented, push forward the ideological and political education of college students
16
Insisting on the impossible: the life of Edwin Land
17
In-site permeability test in Tehran Oil Refining Company (T.O.R.C) in REY Area in Iran
18
In-site process monitoring using laser-based ultrasound
19
In-Site Real-Time Photovoltaic I–V Curves and Maximum Power Point Estimator
20
INSITE—A software toolkit for the analysis of nonlinear dynamical systems
21
INSITE: a software toolkit for studying chaos
22
InSite: QoE-aware video delivery from cloud data centers
23
INSITE
(R
) continuous monitoring system-information not data
24
In-situ - characterization of moisture induced swelling behaviour of microelectronic relevant polymers
25
In-situ μ-raman spectroscopy in femtosecond irradiated material
26
In-Situ
Measurements of
27
In-situ absorption measurements for solar cell current determination during thin-film silicon PECVD
28
In-situ acoustic calibration technique for range and bearing arrays
29
In-situ acoustic received level measurements with glider based reactive behaviour
30
In-situ acoustic thermometry and tomography for rapid thermal processing
31
In-situ acoustical investigation of the polarization build-up in cellular polypropylene ferroelectrets
32
In-situ acoustical monitoring of the effective-polarization hysteresis in cellular polypropylene ferroelectrets
33
In-situ active region temperature measurement for THz quantum cascade lasers
34
In-situ adhesion studies of a single living bovine endothelial cell using MEMS sensor
35
In-situ Al: Ti-co-doped La3 Ga5.5 Ta0.5O14 films for High-Q Resonators
36
In-situ alumina recession and protrusion measurement on a magnetic head
37
In-Situ Analysis of Deformation and Mechanical Stress of Packaged Silicon Dies With an Array of Hall Plates
38
In-situ analysis of electrical conductivity evolution in epoxy-based conductive adhesives with Ag loading during curing process
39
In-Situ Analysis of Ion Irradiation and Implantation Effects
40
In-situ analysis of the degradation of Cu(In, Ga)Se
2
solar cells
41
In-situ analysis of thermal properties of polymer composites by embedded LED temperature sensor
42
In-situ analytics for tomographic imaging in sensor network
43
In-Situ and At-Speed Modeling and Characterization of Logic Interconnect Device Considering Front-End/Back-End Interaction
44
In-situ and ex-situ studies of molybdenum thin films deposited by rf and dc magnetron sputtering
45
In-situ annealing effects on MgB
2
thin films fabricated by electron beam deposition
46
In-situ annealing of Cu(In,Ga)Se
2
films grown by elemental co-evaporation
47
In-situ annealing of GaInNAs at high temperatures
48
In-situ anonymization of big data
49
In-situ antimony doping of CdTe
50
In-Situ Arsenic Doped Single-Crystal Emitters for Low 1/f Noise Self-Aligned SiGe HBTs
51
In-situ assessment of composite insulator surface condition
52
In-situ attitude calibration for high resolution bathymetric surveys with underwater robotic vehicles
53
In-situ barrier formation for high reliable W/barrier/poly-Si gate using denudation of WN/sub x/ on polycrystalline Si
54
In-situ biofabrication of stratified biofilm mimics for direct observation of bacterial signaling
55
In-situ bioremediation and phytoremediation of contaminated soils and water: Three case studies
56
In-situ bioremediation of urban polluted river water with immersed packing bioreactor
57
In-situ bit-reversed ordering for Hartley transforms
58
In-situ Bond Wire and Solder Layer Health Monitoring Circuit for IGBT Power Modules
59
In-situ bond wire health monitoring circuit for IGBT power modules
60
In-situ boron-doped low-stress LPCVD polysilicon for micromechanical disk resonator
61
In-situ Brillouin scattering investigation of spin-waves during the fcc to bcc transition of Fe/Cu(100) films
62
In-situ broadband soil measurements: Dielectric and magnetic properties
63
In-situ calibration and verification techniques for the characterization of microwave circuits and devices
64
In-situ calibration of a translation stage by low-coherence tandem interferometer
65
In-situ calibration of high voltage three-phase transformer loss measuring systems
66
In-situ calibration of high-voltage three-phase transformer loss measuring systems
67
In-situ Calibration of Pollutant Measuring-units by Means of Remotely-controlled Traveling Standards
68
In-Situ Calibration of Sensor Networks for Distributed Detection Applications
69
In-situ calibration of stress chips
70
In-situ calibration of three different types of transformer loss measuring systems using a current-comparator-based load loss standard
71
In-situ calibration of transceiver alignment for a high-precision USBL system
72
In-situ calibration of voltage transformers on the Swedish national grid
73
In-situ calibration of wire bonder ultrasonic system using integrated microsensor
74
In-situ carbon-doped aluminum metallization for VLSI/ULSI interconnections
75
In-situ characterisation of building materials
76
In-situ characterization and extraction of SRAM variability
77
In-situ characterization and modeling of MOVPE for optoelectronic devices
78
In-situ characterization and theoretical consideration of field emission from graphene
79
In-situ characterization of 2D materials for beyond CMOS applications
80
In-situ characterization of 3D package systems with on-chip measurements
81
In-situ Characterization Of Adsorbed Protein Films Using Surface Plasmon Resonance
82
In-situ characterization of engineered surfaces of c-YBCO films for sandwich type junctions
83
In-situ characterization of ferromagnetic shape memory alloy / silicon bimorph nanoactuators
84
In-situ characterization of Fs laser shaping of quasi-percolated Ag nanoparticle layers embedded in amorphous Al
2
O
3
85
In-Situ Characterization of High-Speed I/O Chip-Package Systems
86
In-situ characterization of MOCVD grown GaAs-and InP-based tunable VCSEL structures
87
In-situ Characterization of Moisture Absorption and Desorption in a Thin BT Core Substrate
88
In-situ characterization of moisture absorption-desorption and hygroscopic swelling behavior of an underfill material
89
In-situ characterization of multilayered Langmuir-Blodgett films using a surface plasmon resonance fiber optic sensor
90
In-situ characterization of oxide growth for fabricating spin-dependent tunnel junctions
91
In-Situ characterization of passive rfid tag performance at absolute minimum power levels
92
In-situ characterization of polymer crystallization using a low-cost light emitting diode array as optical receiver with photogain
93
In-situ characterization of red blood cell aggregation measured with high frequency ultrasound in type 2 diabetic patients
94
In-situ characterization of the amorphous to microcrystalline transition in hot wire CVD growth of Si:H using real time spectroscopic ellipsometry
95
In-situ characterization of thermal interface materials
96
In-situ Charge Observation in Insulation Layers of Metal-base Printed Circuit Boards
97
In-situ chemical analysis of molten photovoltaic silicon by Laser Induced Breakdown Spectroscopy
98
In-situ chemical analysis using mass spectrometry on unmanned underwater vehicles
99
In-situ chemical imager [for planetary exploration]
100
In-situ chemical vapor deposition of alumina catalyst bed on a suspended membrane microreactor
101
In-situ CI
2
Thermal Etching Of GaAs/AiGaAs For Damage Removal In A Plasma Etcher
102
In-situ cleaned high-quality InGaAlAs-InGaAsP butt-joint grown by metal-organic vapor phase epitaxy
103
In-situ cleaning for highly reliable 1.3-/spl mu/m InGaAlAs buried heterostructure laser
104
In-situ closed loop hydrogel membrane formation by one step stamping
105
In-situ CMP copper endpoint control system
106
In-situ comparisons of moored acoustic Doppler profilers with conventional VACM and VMCM current meters
107
In-situ condition monitoring of EPDM composite insulators using Fourier transform infra-red spectroscopy
108
In-situ conductance measurement of surface specularity of NiFe, Co, Cu, Ag and Ta thin films
109
In-situ confocal luminescence microscopy study of lithium niobate during domain inversion
110
In-situ contact formation for ultra-low contact resistance NiGe using carrier activation enhancement (CAE) techniques for Ge CMOS
111
In-situ control in zone-melting recrystallization process for formation of high-quality thin film polycrystalline Si
112
In-situ control of quantum point contacts using scanning probe microscopy scratch lithography
113
In-situ control of tunable evanescent-mode cavity filters using differential mode monitoring
114
In-situ controlled growth of carbon nanotubes by local synthesis
115
In-situ Cross Calibration of In-Core Thermocouples in Fast Breeder Test Reactor
116
In-situ crystallization of YBaCuO films by the RF-diode sputtering method
117
In-situ crystallization study of amorphous Ni-P nanoparticles with high P content
118
In-Situ Cu(In,Ga)Se
2
composition control by Optical Emission Spectroscopy during hybrid co-sputtering/evaporation process
119
In-situ cure assembly and thermal performance verification of electronic packages using chip heat
120
In-situ CVD processes for crystalline silicon thin-film solar cells
121
In-situ damascene trench RIE depth monitor using infrared interferometric spectrometry
122
In-Situ Delay Characterization and Local Supply Voltage Adjustment for Compensation of Local Parametric Variations
123
In-situ deposited WSi
x
polycide for high frequency transistor gate structures
124
In-situ deposition and processing of YBa
2
Cu
3
O
7-x
films and multilayers for optoelectronic devices
125
In-Situ Deposition of C-Axis Oriented Barium Ferrite Films for Microwave Applications
126
In-situ depth monitoring of the deep reactive ion etch process
127
In-situ detection of photoresist failures
128
In-situ determination of silane gas utilization and deposition rate for different deposition regimes of μc-Si:H using FTIR and OES in-situ
129
In-situ determination of the transformer core´s magnetization characteristics on HT-7 superconducting Tokamak
130
In-situ determination of thermal coefficients for electrical machines
131
In-situ diagnostic of discharge-polymer interaction by surface luminescence detection
132
In-situ diagnostic of polypropylene degradation by electrical discharge induced luminescence at room temperature
133
In-situ diagnostics handled by the AIA multipurpose carrier
134
In-situ diagnostics of HV outdoor insulators using laser-induced fluorescence spectroscopy
135
In-situ domain observation of Pb(Mg
1
3/Nb
2
3/)O
3
-PbTiO
3
single crystals near the Curie temperature using contact-resonance piezoresponse force microscope
136
In-situ doped and laser annealing of PECVD SiC thin film
137
In-situ doped and tensily stained ge junctionless gate-all-around nFETs on SOI featuring I
on
= 828 µA/µm, I
on
/I
off
∼ 1×10
5
, DIBL= 16–54 mV/V, and 1.4X external strain enhanceme
138
In-Situ Doped Emitter-Polysilicon for 0.5 μm Silicon Bipolar Technology
139
In-Situ Doped P
+
Polysilicon as a MOS Gate Material
140
In-situ doped polysilicon using vapor dopant for high density DRAMs
141
In-situ dry etching of InP using phosphorus trichloride inside a chemical beam epitaxial growth chamber
142
In-situ electric power generation to support solar system exploration and colonization: manufacture of thin film silicon solar cells on the Moon
143
In-situ electrical characterization of Pt/NiO/Pt resistive memory elementary cells during FIB milling: A step towards electrical tomography of nanofilaments
144
In-situ electromigration studies on Sn-Ag-Cu solder joint by digital image speckle analysis (DISA)
145
In-Situ Electron Cyclotron Resonance (ECR) Plasma Potential Determination Using an Emissive Probe
146
In-situ ellipsometric analysis of the photofixing of Volatile Contaminant Materials
147
In-situ ellipsometric characterization of nucleation conditions of HgCdTe grown by MBE
148
In-situ ellipsometry solutions using a radial basis function network
149
In-situ EMC testing using surface current sense wires
150
In-SITU EMI testing of large naval radar systems using a vibrating intrinsic reverberation chamber (VIRC)
151
In-situ emission spectroscopy and plasmachemical analysis of carbon dioxide dissociation in atmospheric pressure microchannel plasma
152
In-Situ Environmental Gamma-Ray Spectrometry Using an Upward-Looking Dip-Stick Type Ge(Li) Detector
153
In-situ epitaxial growth study of Bi
2
(Sr,Ca)
3
Cu
2
O
x
films by ion beam sputtering on cleaved MgO substrates
154
In-situ epitaxial silicon—oxide-doped polysilicon structures for MOS field-effect transistors
155
In-situ ESR observation of dangling bond formation during very thin amorphous SiO
2
growth on Si
156
In-situ etched buried heterostructures for uncooled and extended reach modulated lasers
157
In-situ etching of InP and related P materials in MOVPE chamber using PCl
3
158
In-situ etching of InP based BH laser structures in MOVPE
159
In-situ etching of semiconductor with CBr
4
in MOCVD reactor
160
In-situ evaluation of composite structural performance in presence of high stress/strain gradients using multi-axis fiber grating strain sensors
161
In-situ evolution of a reconfigurable antenna
162
In-situ evolution of an antenna array with hardware fault recovery
163
Insitu examination of water trees using ir spectroscopy
164
In-situ ex-core monitoring using optical fibers with scintillators
165
In-situ experimental investigations of electron space-charge instabilities and noise mechanisms in a reentrant crossed-field amplifier via distributed-cathode emission and gated-beam injection
166
In-situ fabrication of {111} mirror and optical bench using double-sided anisotropic wet etching of {100} silicon wafer
167
In-situ fabrication of highly-fluorescent nanohybrids based on Carbon Nanotubes and Gold Nanoparticles
168
In-situ Fabrication of Micro Pillars on Paraffin Substrate Using Laser Heating
169
In-situ fabrication of nanostructures by photo-enhanced chemical vapor deposition using optical near field
170
In-situ fabrication of SNS junction consisting of YBaCuO/PrBaCuO/YBaCuO structure
171
In-situ fabrication of Tl-based superconducting thin films by two-zone RF-sputtering
172
In-situ fabrication of Y-Ba-Cu-oxide thin films by pulsed laser deposition
173
In-situ far-field calibration of multibeam sonar arrays for precise backscatter imagery
174
In-Situ Feature Extraction of Large Scale Combustion Simulations Using Segmented Merge Trees
175
In-Situ Feature Tracking and Visualization of a Temporal Mixing Layer
176
In-situ Feature-Based Objects Tracking for Large-Scale Scientific Simulations
177
In-Situ FH Measurement From Arbitrary Data Pattern
178
In-situ field emission characterisation of multi walled carbon nanotubes
179
In-situ film thickness and temperature monitoring using a 2 GHz acoustic phase measurement system
180
In-situ film thickness measurements by using pyrometric interferometry
181
In-situ flexural OPV measurements on flexible glass substrate
182
In-situ flying height testing technology
183
In-situ Formation of a Copper Silicide Cap For TDDB and Electromigration Improvement
184
In-situ formation of a gel microbead for laser micromanipulation of microorganisms, DNA and virus
185
In-situ formation of an ion-doped porous structure for high sensitive humidity sensing utilizing low-cost UV sensitive glue
186
In-Situ Formation of As-H-Functions by β-Elimination of Specific Metalorganic Arsenic Compounds for the MOVPE of III/V-Semiconductors
187
In-situ formation of BSCCO thin films by plasma assisted thermal evaporation
188
In-situ formed multifilamentary composites part II: AC losses
189
In-situ FPGA Debug Driven by On-Board Microcontroller
190
In-Situ Fracture Mapping Using Geotomography and Brine Tracers
191
In-situ frequency trimming of SAW resonator using conventional crystal resonator fine tuning method with gold thin film addition
192
In-situ frog retina imaging using common-path OCT with a gold-coated bare fiber probe
193
In-situ FTIR-diffuse reflection study of methanol oxidation mechanisms on fuel cell anodes
194
In-situ Ga
2
O
3
process for GaAs inversion/accumulation device and surface passivation applications
195
In-Situ Gamma-Ray Measurement Using Ge(Li) Detectors
196
In-situ gas cleaning technology of hot-wall batch-type reactor for (Ba,Sr)TiO
3
197
In-situ gas sensing using a suspended ring core photonic crystal fiber
198
In-situ gate oxide/electrode deposition for a 0.5 μm BiCMOS process flow
199
In-situ generated biocompatible alginate actuators for flow control in microfluidics
200
In-situ generation and shrinkage of monodisperse water-in-oil emulsion for femtoliter compartmentalization using capillary traps
201
In-situ grating-damage detection and analysis for the 1.5-m grating compressor of the OMEGA EP kilojoule, petawatt-class short-pulse laser system
202
In-Situ grown carbon nanotubes for enhanced CO
2
detection in non-dispersive-infra-red system
203
In-situ grown dots of InP on GaAs and GaInP-a comparison
204
In-situ health monitoring of power converter modules for preventive maintenance and improved availability
205
In-Situ Heat Capacity Measurement of Carbon Nanotubes Using Suspended Microstructure-Based Microcalorimetry
206
In-situ HfSiON/SiO
2
gate dielectric fabrication using hot wall batch system
207
In-situ high field strength testing using a transportable reverberation chamber
208
In-situ high temperature XRD studies and crystallization behavior of a Ti-rich Ti-Ni-Cu ribbon
209
In-situ holographic testing of lenses with an automatic holocamera
210
In-situ holography microscopy of plankton and particles over the continental shelf of Senegal
211
In-situ impedance spectroscopy of layer-by-layer self-assembly of polyelectrolytes
212
In-situ indoor 3-D land mapping and radioactive source localization
213
In-situ induction motor efficiency determination using the genetic algorithm
214
In-Situ Inelastic Electron Tunneling Spectroscopy of Bistable Molecular Junction Devices
215
In-situ insulation test of 400 kV GIS
216
In-situ insulation test of 400kV GIS
217
In-situ insulator surface charge measurements in dielectric bridged vacuum gaps using an electrostatic probe
218
In-situ interactive modeling using a single-point laser rangefinder coupled with a new hybrid orientation tracker
219
In-situ intermetallic matrix composites fabricated by MA-PDS process
220
In-situ internal stress observation of ferromagnetic thin films at the initial stage of the film growth during sputter-deposition process
221
In-situ investigation of coupling between a fibre and a slab waveguide
222
In-situ investigation of EMC relaxation behavior using piezoresistive stress sensor
223
In-Situ Investigation of Lead-Free Solder Alloy Formation using a Hot-Plate Microscope
224
In-situ investigation of patterned magnetic domain structures using magnetic force microscope
225
In-situ ion beam profiling by fast scan sampling
226
In-situ ion implantation of Xe into Al with high-resolution high-voltage electron microscopy
227
In-situ IR diagnostics for the mmWave/microwave material heating
228
In-Situ Isotropic and Anisotropic DRIE Sequence for Massive Parallel Multistage Brownian Ratchets
229
In-situ jitter tolerance measurement technique for Serial I/O
230
In-situ large scale deposition of PZT films by RF magnetron sputtering
231
In-situ laser deposition of barium ferrite films
232
In-situ laser deposition of barium ferrite films
233
In-situ laser texture chracterization
234
In-situ lateral fabrication of zinc and aluminum nanodots by near field optical chemical vapor deposition
235
In-situ lighting and reflectance estimations for indoor AR systems
236
In-situ local temperature measurement during three-dimensional direct laser writing
237
In-Situ Longitudinal Stretch Of Porcine Aorta At Different Ages
238
In-situ long-term deployment of water quality sensors adversely affected by biological fouling
239
In-situ Lorentz microscopy of magnetic nanostructures
240
In-situ Lorentz microscopy studies of spin-valve structures
241
In-situ Lorentz TEM cooling study of magnetic domain configurations in Ni
2
MnGa
242
In-situ low concentration monitoring of ammonia using an optical fibre sensor
243
In-situ low energy BF
2
+
ion doping for silicon molecular beam epitaxy
244
In-situ low-temperature growth of YBa
2
Cu
3
O
7-x
films by reactive coevaporation
245
In-situ magnetization of isotropic permanent magnets
246
In-situ magnetization of NdFeB magnets for permanent magnet machines
247
In-situ magnetization of permanent magnet machines considering magnetizer capacity and connection types
248
In-situ magnetoresistance measurements of a nanoconstricted nickel-iron film with in-plane configuration
249
In-situ magnetoresistance measurements of permalloy thin films on GaAs[001]
250
In-situ Magnetoresistance Measurements On Spin Valve Elements Combined With Lorentz Transmission Electron Microscopy
251
In-situ magnetoresistance measurements on spin valve elements combined with Lorentz transmission electron microscopy
252
In-situ magnum investigation of patterend magnetic domain structures using magnetic force microscope
253
In-situ measurement and control of growth parameters in molecular beam epitaxy
254
In-Situ Measurement and Prediction of Hearing Aid Outcomes Using Mobile Phones
255
In-situ measurement of crystalline-amorphous transition in Si substrates during ion implantation
256
In-situ measurement of curvature and mechanical stress of packaged silicon
257
In-situ measurement of degradation of Cu(In,Ga)Se
2
thin film solar cells during electron and proton irradiations
258
In-situ measurement of dielectric material properties: Perspectives for integrated digitally calibrated built-in-self-sensor solutions
259
In-situ measurement of dielectric thickness during etching or developing processes
260
In-situ measurement of electrode work function in high pressure lamps
261
In-situ measurement of electromagnetic properties of material using multi-conductor TEM transmission line
262
In-Situ Measurement of Fluid Density Rapidly Using a Vibrating Piezoresistive Microcantilever Sensor Without Resonance Occurring
263
Insitu measurement of flyheight variations in magnetic storage devices through the use of sample margin signal processing techniques
264
In-situ measurement of high frequency emission caused by photo voltaic inverters
265
In-situ measurement of impedance of die power delivery system
266
In-situ measurement of ion angular distribution in bulk titanium DRIE for modeling the etch profile
267
In-situ measurement of nanoparticle quantity in microchambers
268
In-situ measurement of non-steady flows using optical feedback interferometry
269
In-situ measurement of permeability during rotational magnetic annealing of CoZrNb
270
In-situ measurement of reader gap length
271
In-situ measurement of resistivity and structure of lithium intercalated pyrolytic polymer
272
In-situ measurement of space-charge distribution in highly stressed samples
273
In-Situ Measurement of Supply-Noise Maps with Millivolt Accuracy and Nanosecond-Order Time Resolution
274
In-Situ Measurement of Supply-Noise Maps With Millivolt Accuracy and Nanosecond-Order Time Resolution
275
In-situ measurement of temperature dependence of emission current and pressure of a fully-sealed ZnO nanowire field emission device
276
In-situ measurement of the complex dielectric constant of sea ice from 1 to 10 GHz
277
In-situ measurement of the deformation of the off-axis parabolic mirror with large aperture
278
In-situ measurement of the duty-cycle during periodic poling of ferroelectrics domains
279
In-situ measurement of the intrinsic polymerization time during three-dimensional direct laser writing
280
In-situ measurement of variability in 45-nm SOI embedded DRAM arrays
281
In-situ measurement of various thin bond-line-thickness thermal interface materials with correlation to structural features
282
In-situ measurement of wafer camber by a laser-feedback detector
283
In-situ measurement of wet stiction at HDI and whole surface mapping for glide height lower than 500 angstroms
284
In-situ measurement of wirebond strain in electrically active power semiconductors
285
In-situ measurement technioue to measure wear of materials
286
In-situ measurements and analysis of naturally occurring radioactive materials
287
In-situ Measurements For Wet Stiction On Hdi And Whole Surface Mapping Technioue For Glide Height Test Lower Than 500 Angstrom
288
In-situ measurements of Cu(In,Ga)Se
2
composition by X-ray fluorescence
289
In-situ measurements of etch rates in an electron-beam produced plasma reactor
290
In-situ measurements of fatigue demands on a wind turbine support structure
291
In-situ measurements of internal stresses in copper thin films during thermal cycling using synchrotron X-rays
292
In-situ measurements of material thermal parameters for accurate LED lamp thermal modelling
293
In-situ Measurements Of Ocean Surface Films Using A Small Buoy
294
In-Situ Measurements of Particle Size and Charge Distributions for Mars and Lunar Missions
295
In-situ measurements of polycrystalline silicon feature voltages for investigation of the notching effect during plasma etching
296
In-situ measurements of short wave modulation due to bottom topography
297
In-situ measurements of surface mount IC package deformations during reflow soldering
298
In-situ measurements of the complex propagation constant in rocks for frequencies from 1 to 10 MHz
299
In-situ measurements of the electrical stresses induced by corona streamers on polymer foils under AC conditions
300
In-Situ measurements of the relative thermal resistance: Highly sensitive method to detect crack propagation in solder joints
301
In-situ measurements regarding LF radio wave propagation using DCF77 time signal transmitter
302
In-situ measuring material parameters of a MEMS thin-film with a center-anchored circular plate by non-contact method
303
In-situ mechanical characterization of mouse oocytes using a cell holding device
304
In-Situ Mechanical Impedance of Air Bearing in Hard Disk Drive
305
In-situ mechanical property evaluation of different stage Drosophila embryos with a minimally invasive microforce sensing tool
306
In-situ metal/dielectric capping process for electromigration enhancement in Cu interconnects
307
In-Situ Method for TSV Delay Testing and Characterization Using Input Sensitivity Analysis
308
In-situ micro-digital image speckle correlation technique for characterization of materials´ properties and verification of numerical models
309
In-situ microfabrication of permeation membrane with photo-crosslinkable resin for isolation and culture of individual cells
310
In-situ Microwave Characterization of Medium-k HfO
2
and High-k STO Dielectrics for MIM Capacitors Integrated in Back-End of Line of IC
311
In-situ mobility profiling of GaAs MESFET´s using the hall current technique
312
In-Situ Modeling of a High-Speed Autonomous Surface Vessel
313
In-situ module-level I?V tracers for novel PV monitoring
314
In-situ moire interferometry technique and its applications to microelectronic packages
315
In-situ moire measurement of adhesive flip-chip bonded assembly under thermal cycling condition
316
In-situ moisture desorption characterization of epoxy mold compound
317
In-situ monitor electrochemical processes in batteries using vibrating microcantilevers
318
In-situ monitored deposition of SiO2 on longitudinal wave based resonator
319
In-Situ Monitoring Analysis of Temperature and Stress of Lining Concrete in Permanent Ship-Lock Filling and Emptying System
320
In-situ monitoring and analysis on the stability of surrounding rock of Qiankeng tunnel
321
In-situ monitoring and anomaly detection for LED packages using a Mahalanobis distance approach
322
In-situ monitoring and control for the growth of highly reproducible VCSEL structures
323
In-situ monitoring during PLD of YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// using RHEED at high oxygen pressure
324
In-situ monitoring during vapour phase growth of bulk crystals of cadmium zinc telluride
325
In-situ Monitoring of Active Crack in Steel Structure Using Acoustic Emission Technique
326
In-situ monitoring of AlGaInP by reflectance spectroscopy in metalorganic vapor phase epitaxy
327
In-situ monitoring of arsenic-phosphorus exchange in MOVPE growth of InGaAs/InP quantum wells by kinetic ellipsometry
328
In-situ monitoring of bond degradation in power ICs under high current stress
329
In-situ monitoring of Carbon Dioxide Emissions from a Diesel Automobile using a Mid-Infrared Optical Fibre Based Point Sensor
330
In-situ monitoring of cavity filling in nanoimprint by capacitance
331
In-situ monitoring of dry corrosion degradation of au ball bonds to al bond pads in plastic packages during HTSL
332
In-situ monitoring of epitaxial film thickness by IEMI
333
In-situ monitoring of iron nanoparticles movement and graphitization control by Joule heating at local current injection
334
In-situ Monitoring of Moisture Content in Powder Processing Using Dielectric Probe Measurements with Multivariate Calibration
335
In-situ monitoring of particle velocities and solids concentration variations in wet low-intensity magnetic separators
336
In-Situ Monitoring of Photoresist Thickness Contour
337
In-situ monitoring of PMD and PDL in a traffic-carrying transatlantic fiber-optic system
338
In-Situ Monitoring of Sediment Resuspension in the Vicinity of Active Dredge Spoils Disposal Areas
339
In-situ monitoring of the accelerated performance degradation of thin film solar cells
340
In-Situ Monitoring of the Bulk Density and the Moisture Content of Rapidly Flowing Particulates Using a Microwave Resonance Sensor
341
In-situ monitoring of the selective etching of antimonides in GaSb/AlSb/InAs heterostructures using Raman spectroscopy
342
In-situ monitoring of thickness of quartz membrane during batch chemical etching using a novel micromachined acoustic wave sensor
343
In-situ monitoring on junction temperature for degradation analysis of light-emitting diodes
344
In-situ monitoring technique for growth of CdS layer by quartz crystal microbalance
345
In-situ monolayer etching and regrowth of InP/InGaAsP
346
In-situ monolithic integration of nanobeam laser with passive waveguide on SOI
347
In-Situ MOS Gate Engineering in a Novel Rapid Thermal/Plasma Multiprocessing Reactor
348
In-situ MOS gate engineering in a novel rapid thermal/plasma multiprocessing reactor
349
In-situ multi-resolution and temporal data compression for visual exploration of large-scale scientific simulations
350
In-situ multi-step (IMS) CVD process of (Ba,Sr)TiO/sub 3/ using hot wall batch type reactor for DRAM capacitor dielectrics
351
In-situ n & k phase compensation in an interferometric flying height tester
352
In-situ nanoelectrode growth inside FE-SEM for bio-chemical nanodevices
353
In-situ nanomechanical characterization of electrochemical cycles in lithium ion batteries
354
In-situ nanomechanical studies of carbon nanotube bundles
355
In-situ nanorobotic soldering of three-dimensional helical nanobelts using gold nanoink
356
In-situ nanoscale characterization of annealing effect on TiN/Ti/HfO
x
/TiN Structure for Resistive Random Access Memory (ReRAM)
357
In-situ nanowire array synthesis in the microchannel for microfluidic devices
358
In-Situ Near-Field Optical Study of Mode Fields within the Laser Diode Cavities in Operation
359
In-situ networks on test-sites in support of space earth observations
360
In-Situ Neutron Dosimetry for Single-Event Effect Accelerated Testing
361
In-situ nitride mask open [STI technology]
362
In-situ noise characterization of a 20–35 GHz 32 nm SOI CMOS reconfigurable LNA using a broadband on-chip noise source
363
In-situ non-acoustic noise measurement system for towed hydrophone array
364
In-situ non-destructive testing of superconducting dipoles in the Tevatron
365
In-situ Non-destructive Ultrasonic Rheology Technique for Monitoring Different Lead-free Solder Pastes for Surface Mount Applications
366
In-situ observation and formation mechanism of aluminum voiding
367
In-situ observation of As/P exchange reaction and As carryover in InAs/InP quantum well structures by surface photoabsorption
368
In-situ observation of behavior of magnetic particle clusters during torque transfer between textured magnetic poles
369
In-situ observation of current-induced plastic deformation of a carbon nanotube
370
In-situ observation of domain wall pinning in Sm(Co, Fe, Cu, Zr)
z
magnet by Lorentz microscopy
371
In-situ observation of electrode melting in multilayer-ceramic capacitors
372
In-situ observation of electromigration induced failure modes and intermetallic compound growth mechanisms for Chip Scale Packages with different structures
373
In-Situ Observation Of FIB Micropatterning To Semiconductors
374
In-situ observation of focused ion beam micromilled Si, SiO
2
and GaAs
375
In-situ observation of formation of eutectic structure between Au and Si
376
In-situ observation of formation process of self-assembled Si islands on buried SiO
2
and their crystallographic structures
377
In-Situ Observation of Magneto-Optical Kerr Effect and Resistance of Fe Island Films
378
In-situ observation of SAC305 degradation during isothermal mechanical cycling of joint-scale samples
379
In-situ Observation of Selenization of Cu-Ga-In Metallic Precursors
380
In-situ observation of stability of nanosized amorphous zones in Ge
381
In-situ observation of temperature distribution of microheaters using near-infrared CCD imaging system
382
In-situ observation of the failure induced by thermomigration of interstitial Cu in Pb-free flip chip solder joints
383
In-situ observation of the microwave response of lead evolution
384
In-situ observation of ultrashort pulse deep drilling in silicon at 1030 nm and 515 nm
385
In-situ observation of ultrasonic bonding using high speed camera
386
In-situ observation of whisker nucleation in air with AFM
387
In-situ observation on electrochemical migration of lead-free solder joints under water drop test
388
In-situ observation research on the regularities of water migration in loess
389
In-situ observation study on nano constriction spacer NOL for CPPGMR by conductive AFM
390
In-situ observations of glass frit related effects during the front side paste contact formation
391
In-Situ Observations of Magneto-Optical Spectra for Co/Cu (001) Ultrathin Films
392
In-situ opening aligned carbon nanotube films/arrays for multichannel ballistic transport in electrical interconnect
393
In-situ Opening Aligned Carbon Nanotubes and Applications for Device Assembly and Field Emission
394
In-situ operations and planning for the Mars Science Laboratory Robotic Arm: The first 200 sols
395
In-Situ Optical Creep Observation and Constitutive Modelling of Joint-Scale SAC Solder Shear Samples
396
In-situ optical diagnosis during pulsed laser deposition of high-T/sub c/ superconductor thin films
397
In-situ Optical Diagnostics Of Semiconductor heterostructures
398
In-situ optical fibre sensors for temperature and salinity monitoring
399
In-situ optimal control of nutrient solution for soilless cultivation
400
In-situ optimization of cost function for genetic algorithm using neural networks applied to antenna design
401
In-situ OTDR measurements for single-mode optical networks with a standard VCSEL
402
In-situ out-core monitoring using optical fibers with scintillators
403
In-situ ovenization of Lamé-mode silicon resonators for temperature compensation
404
In-situ particle measurement with blurred image processing using telecentric lenses
405
In-situ particle measurements in process equipment
406
In-situ particle monitoring in a vertical poly furnace
407
In-situ particle sizing at sea bottom interface
408
In-Situ Parts-Per-Million Analysis of Marine Sediments by X-Ray Fluorescence Techniques
409
In-situ performance analysis of satellite communication in the high north
410
In-situ performance monitor employing threshold based notifications (TheBaN)
411
In-situ pH measurement: A continuous flow analysis method for seawater pH determination using a ion sensitive field effect transistor (ISFET)
412
In-situ phosphorous doped VLPCVD poly-Si layers for polysilicon thin film transistors
413
In-situ phosphorous-doped VLPCVD polysilicon layers for polysilicon thin-film transistors
414
In-Situ Phosphorus Doping on Si/sub 1-x/Ge/sub x/ Epitaxial Growth In The SiH/sub 4/ - GeH/sub 4/ - PH/sub 3/ Gas System by Using LPCVD
415
In-situ Photochemical Synthesis of Novel Silver Nanoparticles/Polymer Composites as High K Polymer Matrix for Embedded Passives Applications
416
In-situ Photochemical Synthesis of Novel Silver Nanoparticles-Polymer Composites as High K Polymer Matrix for Embedded Passives Applications
417
In-situ photoelastic monitoring of electrical treeing in polyethylene
418
In-situ photoluminescence surface state spectroscopy for InP and InGaAs
419
In-situ picosecond measurements of InP and GaAs ICs utilizing photoconductive sampling probes
420
In-situ plasma cleaning by rotating transverse magnetic field
421
In-situ plasma etch process endpoint control in integrated circuit manufacturing
422
In-situ PN junction formation during edge defined film-fed growth of silicon
423
In-situ polyimide removal using modified dual acid decapsulator
424
In-situ polymer buildup monitoring in plasma etching systems [micromachined sensor]
425
In-situ polymerized poly(3-hexylthiophene) and TiO
2
nanocomposites for organic solar cells
426
In-situ post-deposition thermal annealing of co-evaporated Cu(InGa)Se
2
thin films deposited at low temperatures
427
In-situ post-treatment for field emission improvement of carbon nanofibers in inductively coupled plasma system
428
In-situ power monitoring scheme and its application in dynamic voltage and threshold scaling for digital CMOS integrated circuits
429
In-situ prediction of reactive ion etch endpoint using neural networks
430
In-situ prediction of RIE time to completion using neural networks
431
In-Situ predictive endpoint for dual damascene trench etch depth control for composite dielectric films
432
In-situ preparation of biopolymer/Fe
3
O
4
hybrid nanocomposites in supercritical carbon dioxide
433
In-situ preparation of radioactive tracers in NIF capsules
434
In-situ preparation of superconducting Bi-Sr-Ca-Cu-O thin films by high pressure DC sputtering
435
In-Situ Pressure Measurements of Encapsulted Gyroscopes
436
In-situ probes for antenna array calibration
437
In-situ probing of coherence in hollow waveguide high order harmonic generation
438
In-situ Probing of Coherence in Hollow Waveguide High-order Harmonic Generation
439
In-situ process control for semiconductor manufacturing
440
In-situ processing and interactive visualization for large-scaled numerical simulations
441
In-situ Processing Of ADCM Data For Real Time Telemetry
442
In-situ Processing Of GaAs/AiGaAs By Low Damage Selective Etching And Focussed Ion Beam Patterning
443
In-situ proton irradiation and measurement of superconducting RF cavities under cryogenic conditions
444
IN-SITU PTR and PTP Measurements of a Magnetic Head
445
In-situ pulse characterization for silicon micromachining
446
In-situ Pulse Characterization for Silicon Micromachining
447
Insitu Pyrochemical Wafer Cleaning For Furnace Processing
448
In-situ pyroelectrical study of the polarization dynamics in nonlinear optical polymers and physico-chemical investigation of photo-induced degradation
449
In-situ Quantification of 3D Scene Complexity
450
In-situ quantification of deposition amount in a poly-Si etch chamber using optical emission spectroscopy of etching plasmas
451
In-situ racer studies of surficial sediment transport in the Great Lakes using manned submersible
452
In-situ radiated EMI measurements of EDM machines and EMI reduction techniques
453
In-situ Raman scattering spectroscopy for super resolution optical disk
454
In-Situ Raman Spectroscopic Surface Stress Measurement of Single Crystal Silicon Microstructures Subjected to Uniaxial Tensile Loading
455
In-situ rapid isothermal processing (RIP) of InP based devices
456
In-situ RBS for oxygen ion implantation systems
457
In-situ Rb-Sr geochronology
458
In-situ real-time characterization of spurious modes in HE
11
transmission lines with a mitrebend hole coupler
459
In-situ reconfiguration for flexible distribution of energy and storage resources
460
In-situ reduced silver nanoparticles for highly conductive anisotropic conductive films applications
461
In-situ refinement techniques for outdoor geo-referenced models using mobile AR
462
In-situ reflectance monitoring and characterization of GaN grown by MOCVD
463
In-situ regeneration of co-enzyme NADH with an electro-enzymatic biomimetic membrane
464
In-situ reliability analysis of solder joint by digital image correlation
465
In-situ reliability monitoring on PBGA packaging through piezoresistive stress sensor
466
In-situ remediation of petroleum contaminated groundwater: Application and prospect of permeable reactive barrier
467
In-situ repetitive calibration of microscopic probes maneuvered by holonomic inchworm robot for flexible microscopic operations
468
In-situ resist temperature monitor during hot embossing lithography by fluorescence probe technique
469
In-situ resistance measurement during the growth of Cu(In, Ga)Se
2
films by multi-source evaporation
470
In-situ Resistance Measurements during Tensile Test of Carbon Nanotube using Nano-manipulator
471
In-situ resistance measurements of RHQT processed Nb
3
Al superconductors
472
In-situ RHEED studies of YBCO-film growth during pulsed laser deposition
473
In-situ RHEED-TRAXS analysis during the preparation of YBa/sub 2/Cu/sub 3/O/sub 7-x/ thin films
474
In-situ robotic interventions in hydraulic turbines
475
In-situ robust nanorobotic resistance spot welding of InGaAs/GaAs helical nanobelts without pretreatment
476
In-situ scanning tunneling microscopy observation of InAs quantum dots on GaAs(001) during molecular beam epitaxy growth
477
In-Situ Seawater Corrosion of Bare, Diffusion Zinc Treated and Alclad Aluminum Heat Exchanger Materials
478
In-situ second harmonic spectroscopic study of surface vs. bulk boron-doping of Si[001]
479
In-situ selective area etching by using HCl gas in an MOVPE reactor
480
In-situ self-assembled colloidal crystals within microchannels using one step stamping for direct seawater desalination by ion concentration polarization
481
In-situ self-aware adaptive power control system with multi-mode power gating network
482
In-situ sensor information filtering for pedestrian localization
483
In-Situ Sensor-Matrix to Determine Package-Induced Stresses
484
In-situ shallow trench isolation etch with clean chemistry
485
In-situ silicon integrated tuner for automated on-wafer MMW noise parameters extraction of Si HBT and MOSFET in the range 60–110GHz
486
In-Situ Silicon Integrated Tuner for Automated On-Wafer MMW Noise Parameters Extraction using Multi-Impedance Method for Transistor Characterization
487
In-situ single cell electroporation using optoelectronic tweezers
488
In-situ single cell manipulation via nanorobotic manipulation system inside E-SEM
489
In-situ single cell mechanical characterization of W303 Yeast cells inside Environmental-SEM
490
In-situ Single Cell Mechanics Characterization of W303 Yeast Cells using Nanoneedles inside Environmental-SEM
491
In-situ single DNA manipulation with φ20 nm electron-beam-deposited probe
492
In-situ sinking speed measurements of marine snow aggregates acquired with a settling chamber mounted to the Cherokee ROV
493
In-Situ Site Knowledge System [Mars technology program]
494
In-Situ Soil Gas Analysis with a Robust Sawsensor System Integrated in Percussion Driven Penetration Cones
495
In-Situ Soil Moisture Sensing: Efficient Random Sensor Placement and Field Estimation Using Compressive Sensing
496
In-situ soil moisture sensing: Measurement scheduling and estimation using compressive sensing
497
In-situ solder fatigue studies using a thermal lap shear test
498
In-situ solution doping technique for novel geometry rare-earth doped fiber fabrication
499
In-situ soot particle sensing in an aero-engine exhaust plume
500
In-situ space charge distribution measurements in electron irradiated polymers for space applications
501
In-Situ space charge measurements on dielectrics during electronic irradiation by PEA
502
In-situ spectral ellipsometry monitoring/control of MBE growth
503
In-situ spectroelectrochemical characterization of poly(1,5-diamino-naphthalene)
504
In-situ spectroscopic measurements of streamer properties (electron density and temperature) in dielectric liquids
505
In-situ spin stand ESD testing of giant magnetoresistive (GMR) recording heads
506
In-situ sputtering of YBCO films for microwave applications
507
In-situ stabilization of membranes for improved large-area and high-density nanostencil lithography
508
In-situ stage development for high-temperature X-ray nanocharacterization of defects in solar cells
509
In-situ steam generation for shallow trench isolation in sub-100 nm devices
510
In-situ strain measurement during epitaxy of InP based materials
511
In-situ strain measurement with metallic thin film sensors
512
In-situ stress and thermal stability studies of molybdenum bilayer back contacts for photovoltaic applications
513
In-situ stress and warpage measurements to investigate reliability of flip-chip on board assembly without underfill
514
In-situ stress changes of WSi
x
film during polycide process sequence
515
In-situ stress measurement and result analysis in the 8th mine of Pingmei group, China
516
In-situ stress state measurements during chip-on-board assembly
517
In-situ study and modeling of the decreasing reaction rate at the end of CoSi
2
formation
518
In-situ study of acoustomigration by scanning acoustic force microscopy
519
In-situ study of CIGS dielectric function as a function of copper content
520
In-situ study of the effect of electromigration on strain evolution and mechanical property change in lead-free solder joints
521
In-situ study of the nonlinear optical responses and dynamics for crosslinked and uncrosslinked polymers
522
In-situ study on the effects of temperature and size on the electromigration characteristics of eutectic SnPb and Pb-free solder alloys
523
In-situ study on the formation and evolution behavior of voids at the interface during soldering process by synchrotron radiation real-time imaging technology
524
In-Situ Surface Passivation and Metal-Gate/High-κDielectric Stack Formation for N-channel Gallium Arsenide Metal-Oxide-Semiconductor Field-Effect Transistors
525
In-situ surface preparation of InP-based semiconductors prior to direct UVCVD silicon nitride deposition for passivation purposes
526
In-situ synchrotron X-ray diffraction measurement of epitaxial FeRh thin films
527
In-situ synthesis and crystal growth of high purity InP
528
In-situ technique for measuring wear of materials
529
In-situ TEM biasing experiments to study thickness-dependent ferroelectric domain switching of Pb(Zr,Ti)O
3
films
530
In-situ TEM characterization of nanomaterials and devices
531
In-situ TEM electrical and mechanical properties measurements of one-dimensional inorganic nanomaterials
532
In-situ TEM investigation of stepping motion of telescoping carbon nanotube
533
In-situ TEM observation and electrical measurement of gold nanocontact during tensile test using MEMS opposing tips
534
In-Situ TEM Observation of Crystal-Facet-Dependent Self-Rearranging Gold Atoms Under Tensile Stress Controlled by MEMS Nanoprobe Positioner
535
In-situ TEM observation of ReRAM switching
536
In-situ TEM observation on nanostructure evolution during electrical stressing
537
In-situ TEM studies of damage formation under electromigration in Al interconnects
538
In-situ TEM tensile test of 90nm-thick 〈110〉 SCS beam using MEMS chip
539
In-situ temperature measurements of Joule-heated graphene using near-infrared CCD imaging system
540
In-Situ Temperature Monitoring and Deposition Induced Errors Calibration in Metal-Organic Chemical Vapor Deposition
541
In-situ temperature monitoring for process control in laser assisted polymer bonding for MEMS packaging
542
In-Situ Test of Pile-Soil Stress Ratio of CFG Pile-Net Composite Foundation in Beijing-Shanghai High-Speed Railway
543
In-situ test of red tide monitoring using microwave and millimeter-wave radiometer
544
In-situ test structures for ultra low leak detection
545
In-situ test study on hydraulic fills ground improvement by high vacuum compact method
546
In-situ testability design (ISTD)—A new approach for testing high-speed LSI/VLSI logic
547
In-situ thermal conductivity measurement of magnetic nanoparticle layers in Lab-on-a-Chip devices
548
In-situ thermal deformation measurement of low-k layer using nano-pattern recognition and correlation technique
549
In-Situ Thermal Response Test for Closed-Loop Vertical Ground Heat Exchanger in Shanghai, China
550
In-situ thermal response test of the ground thermal properties for a ground source heat pump project located in the Inner Mongolia district
551
In-situ thickness method of measuring thermo-physical properties of polymer-like thermal interface materials [microelectronics cooling applications]
552
In-Situ TID Test of 4-Gbit DDR3 SDRAM Devices
553
In-situ timing monitoring methods for variation-resilient designs
554
In-situ transesterification of Jatropha curcas seeds using the mixture of methanol and isopropanol
555
In-Situ Transfer Standard and Coincident-View Intercomparisons for Sensor Cross-Calibration
556
In-situ transmission electron microscopy of structural change of the contact between a carbon nanotube and gold by local Joule heating
557
In-situ transmission electron microscopy studies on the dynamic behaviors of materials
558
In-situ transmission electron microscopy study of nanotwinned copper under electromigration
559
In-situ ultrahigh vacuum transmission electron microscope investigations of nanostructures
560
In-situ ultrasonic thermometry of semiconductor wafers
561
In-situ unmanned aerial vehicle (UAV) sensor calibration to improve automatic image orthorectification
562
In-situ vacuum-sealed lateral FEAs with low turn-on voltage and high transconductance
563
In-situ variability characterization of individual transistors using topology-reconfigurable ring oscillators
564
In-situ vehicular antenna integration and design aspects for vehicle-to-vehicle communications
565
In-situ video-electrochemical measurements of coalescence of emulsions
566
In-situ visualization and computational steering for large-scale simulation of turbulent flows in complex geometries
567
In-Situ visualization in fluid mechanics using Catalyst: A case study for Code Saturne
568
In-situ visualization of local fields at a sharp tungsten emitter using low-voltage scanning transmission electron microscope
569
In-situ wavelength aging study and reliability thermal model of C-band 100mW high-power DWDM lasers
570
In-Situ Web Mashup and Hypermedia Support for Mobile Vision-Based AR Applications
571
In-situ work piece surface roughness estimation in turning
572
In-situ X-ray diffraction analysis of the crystallisation of a-SI:H films deposited by the expanding thermal plasma technique
573
In-situ X-ray monitoring in MOVPE and feedback growth of strained InGaAs
574
In-situ XRD investigation on phase transition of CdTe thin films during a CdCl
2
heat treatment
575
In-Situ, Low Dose Rate, TID Test of the Power Supply Block of RadEx, a CubeSat Class Radiation Experiment Module
576
In-situ, low dose rate, total ionising dose test of the cooling performance of a thermoelectric module
577
In-situ, non-destructive identification of chemical elements by means of portable EDXRF spectrometer
578
In-situ, non-destructive identification of chemical elements by means of portable EDXRF spectrometer
579
In-Situ, Real-Time Detector for Faults in Solder Joint Networks Belonging to Operational, Fully Programmed Field Programmabmle Gate Arrays (FPGAS)
580
In-Situ, Real-Time Detector for Faults in Solder Joint Networks of Operational, Fully-Programmed Field Programmable Gate Arrays (FPGAs)
581
In-situ, vibrationally-resonant sum frequency spectroscopy study of the self-assembly of dioctadecyl disulfide on Au
582
Insituttional Listings
583
In-situ-X-Ray investigation on pressure release during conventional and diffusion soldering
584
In-situ-X-ray investigation on vacuum soldering processes for conventional and diffusion soldering
585
In-slot stator winding of DC brushless motors
586
In-sodium hydrogen detection in the phenix fast reactor steam generator: a comparison between two detection methods (May 2009)
587
Insolated high frequency link AC-AC converter based on sinusoidal wave modulation technology for voltage compensation
588
Insolation dependent solar module performance evaluation from PV monitoring data
589
Insole Antenna for On-Body Telemetry
590
In-Sole MEMS Pressure Sensing for a LowerExtremity Exoskeleton
591
Insole Pedometer With Piezoelectric Energy Harvester and 2 V Organic Circuits
592
Insole pedometer with piezoelectric energy harvester and 2V organic digital and analog circuits
593
Insole plantar pressure systems in the gait analysis of post-stroke rehabilitation
594
Insole sensor system for real-time detection of biped slip
595
Insole with pressure control and tissue neoformation induction systems for diabetic foot
596
Insolvency prediction model using artificial neural network for Malaysian general insurers
597
Insomnia Treatment Assessment Based on Physiological Data Analysis
598
Insomnia types and sleep microstructure dynamics
599
Insomniac wizards revisited [Book Reviews]
600
Insourcing A Government Information System An analysis using institutions and the capability approach
601
Insourcing maintenance: from railtrack to network rail
602
Insourcing or outsourcing? that is the question
603
In-Space Propulsion Electric Propulsion Technologies Mission Benefits
604
In-Space Propulsion Technology products for NASA´s future science and exploration missions
605
In-Space Propulsion Technology products ready for infusion on NASA´s future science missions
606
In-Space Robotic Assembly with Lemur IIa
607
In-space servicing accommodations: architectural and mission implications
608
In-space transportation infrastructure architecture decisions using a weighted graph approach
609
In-space transportation of a solar power satellite using a hall thruster propulsion system
610
INSPAD: a system for automatic bond pad inspection
611
INSPEC aids the blind
612
INSPEC expands in Japan
613
INSPEC holds second workshop
614
INSPEC´s progress
615
INSPEC´s progress
616
INSPEC´s progress
617
INSPEC
2
T: Inexpensive Spectrometer Color Camera Technology
618
INSPEC¿a new concept in information services
619
INSPECT: Extending plane-casting for 6-DOF control
620
Inspectable Collaborations in Online Distributed Classrooms
621
Inspecting Coding Dependency in Layered Video Coding for Efficient Unequal Error Protection
622
Inspecting Ingredients of Starches in Starch-Noodle based on Image Processing and Pattern Recognition
623
Inspecting integrity and residual stress of plate by ultrasonic wave
624
Inspecting LED micro structure by piezo servo system
625
Inspecting Minefields and Residual Explosives by Fast Neutron Activation Method
626
Inspecting safety level of bluetooth headset radiation in the vicinity of human head: A numerical study
627
Inspecting specular lobe objects using four light sources
628
Inspecting surface mounted devices using k nearest neighbor and Multilayer Perceptron
629
Inspecting system of heat transmission coefficient of building envelop based on Zigbee technology
630
Inspecting the effects of post-annealing on ZnO nanorods by optical second harmonic generation
631
Inspecting the History of Inspections: An Example of Evidence-Based Technology Diffusion
632
Inspecting the minefield and residual explosives by fast neutron activation method
633
Inspecting the performance of packet schedulers over a large-scale OpenFlow-based network
634
Inspecting the Ways of Source Anonymity in Wireless Sensor Network
635
Inspecting tomorrow´s materials
636
Inspecting transmission lines with an unmanned fixed-wings aircraft
637
Inspection allocation in manufacturing systems using stochastic search techniques
638
Inspection allocation in manufacturing systems: a genetic algorithm approach
639
Inspection and control of vehicle emissions through Internet of Things and traffic lights
640
Inspection and data collection procedures-present and future [overhead lines]
641
Inspection and deconfliction of published virtual machine templates´ remnant data for improved assurance in public Clouds
642
Inspection and error analysis of Geneva gear on machine vision system using Sherlock™ and VB 6.0 Algorithm
643
Inspection and Image Analysis of Nickel Sulphide Inclusions in Toughened Glass Panels
644
Inspection and maintenance of wooden poles structures
645
Inspection and measurement of leather system based on artificial vision techniques applied to the automation and waterjet cut direct application
646
Inspection and Orientation Model of Digital Camera
647
Inspection and Process evaluation for Flip Chip Bumping and CSP by scanning 3D confocal microscopy
648
Inspection and quality control-an overview
649
Inspection and quality control-an overview
650
Inspection and recognition of optical target in Opto-Eleetronic target tracking system
651
Inspection- and repair robots for waste water pipes a challenge to sensorics and locomotion
652
Inspection and testing
653
Inspection and testing of electrical installations
654
Inspection and tests of explosion proof motors
655
Inspection and Tests of Explosion Proof Motors
656
Inspection as an aid to production
657
Inspection assistant - A knowledge-based system for piece part inspection
658
Inspection by sampling
659
Inspection by-reuse: evaluation patterns for hypermedia synchronization
660
Inspection challenges for triple patterning at sub-14 nm nodes with broadband plasma inspection platforms
661
Inspection challenges of leadless packages
662
Inspection criteria for HMPE rope
663
Inspection criteria of PV module production facilities for certification bodies: Important step on the way of smart development
664
Inspection effectiveness for different quality attributes of software requirement specifications: An industrial case study
665
Inspection enhancement of wind turbine blades using novel signal-processing approaches
666
Inspection experience in determining fabrication flaws in a reactor pressure vessel using SAFT-UT
667
Inspection flow of yield impacting systematic defects
668
Inspection for critical issue of floating body effects in SOI-MOSFET using nuclear particles
669
Inspection for electric power systems using uncooled infrared camera
670
Inspection for Roll Eccentricity Signal Based on Convolution Type of Wavelet Packet Transform
671
Inspection Intervals for Condition-Maintained Items Which Fail in an Obvious Manner
672
Inspection Intervals for Fail-Safe Structure
673
Inspection method based on multi-agent auction for graph-like maps
674
Inspection method for geometrical tolerance using virtual gauges
675
Inspection method for used roller parts
676
Inspection method on measuring unwanted emissions from Broadband Power Line using mobile monitoring station
677
Inspection Methods for Safeguards Systems at Nuclear Facilities
678
Inspection methods for underwater structures of ports and harbors
679
Inspection methods of load-recording device “Gamma-500”
680
Inspection methods to determine potential arc flash
681
Inspection of a Plasma Display Panel (PDP) Using Frequency Domain Analysis
682
Inspection of aircraft parts with high remanent magnetization by eddy current SQUID NDE
683
Inspection of backlight units with high luminance contrast
684
Inspection of bottles crates in the beer industry through computer vision
685
Inspection of brazing joint defects in the heat exchanger using X-ray
686
Inspection of C-4 mail bomb by terahertz spectroscopy
687
Inspection of Complex Objects Using Multiple-X-Ray Views
688
Inspection of continuously moving metallic tubes by artificial vision: modelisation and results
689
Inspection of critical dimension- and transmission uniformity of contact patterns by DUV imaging and regression algorithm
690
Inspection of defect on LCD panel using local mean algorithm based on similarity (ICCAS 2013)
691
Inspection of defect on LCD panel using polynomial approximation
692
Inspection of defect-induced mode coupling in hollow-core photonic bandgap fibers using time-of-flight
693
Inspection of defects in fabrics using Gabor wavelets and principle component analysis
694
Inspection of electrical interconnections within power ICs via magneto-optical imaging
695
Inspection of electrical wires for insulation faults and current surges using sliding temperature sensor based on optical Microfibre coil resonator
696
Inspection of fabric defects based on wavelet analysis and BP neural network
697
Inspection of faults in textile web materials using wavelets and ANFIS
698
Inspection of ground-wall insulation for AC rotating machines using X-ray tomography
699
Inspection of high voltage cables using X-ray techniques
700
Inspection of IC leadframes using an unsupervised neural network
701
Inspection of Insulators on High-Voltage Power Transmission Lines
702
Inspection of integrated circuit photomasks with intensity spatial filters
703
Inspection of interference in a decentralized control of redundant master-slave system
704
Inspection of Internal Structure of Walls by Subsurface Radar
705
Inspection of intrinsic critical currents for spin-transfer magnetization switching
706
Inspection of intrinsic critical currents for spin-transfer magnetization switching by low-temperature measurements
707
Inspection Of Large Synchronous Machines
708
Inspection of large tile walls for high-rise buildings based on a mechatronic mobile system
709
Inspection of laser welded hermitically sealed packages using eddy current flaw detection method
710
Inspection of machine parts by backprojection reconstruction
711
Inspection of materials for advanced sensors
712
Inspection of metallic surfaces using Local Binary Patterns
713
Inspection of milk components by terahertz attenuated total reflectance (THz-ATR) spectrometer equipped temperature controller
714
Inspection of Miniaturised Interconnections in IC Packages with Nanofocus ® X-Ray Tubes and NanoCT
715
Inspection of miniaturised interconnections in IC packages with nanofocus X-ray tubes and nanoCT
716
Inspection of Objects on the Sea Floor Utilizing 14 MeV Tagged Neutrons
717
Inspection of periodic patterns with intensity spatial filters
718
Inspection of periodic patterns with intensity spatial filters
719
Inspection of Pin Insulators in Distribution Medium Voltage Lines & Outage Reductions
720
Inspection of pin insulators in medium voltage distribution lines and outage reduction
721
Inspection of polarizer tiny bump defects using computer vision
722
Inspection of pole-like structures using a vision-controlled VTOL UAV and shared autonomy
723
Inspection of printed circuit board by planar ECT probe
724
Inspection of printed circuit boards by connectivity preserving shrinking
725
Inspection of rail surface defect based on machine vision system
726
Inspection of rail surface defects based on image processing
727
Inspection of residual strain in GaAs single crystal as standard ingot form
728
Inspection of Rice Appearance Quality Using Machine Vision
729
Inspection of sanitary bacteria in the pacific whiteshrimp (Litopeneaus vanamei) pond culture, Trang province for developing a safety culture system
730
Inspection of Separability of Normal and Migraine fNIRS Data using LDA and PCA
731
Inspection of short fault in power-plane with irregular and perforated shapes [MCMs]
732
Inspection of skin hemodynamics with hyperspectral camera
733
Inspection of Smooth Metallic Surface Using Complex Discrete Wavelet Transform
734
Inspection of space shuttle insulation foam defects using a 0.2 THz Gunn diode oscillator
735
Inspection of specular surfaces using optimized M-channel wavelets
736
Inspection of Spray on Foam Insulation (SOFI) Using Microwave and Millimeter Wave Synthetic Aperture Focusing and Holography
737
Inspection of stator cores in large machines with a low yoke induction method-measurement and analysis of interlamination short-circuits
738
Inspection of steel sheets based on CCD image sensors
739
Inspection of submarine cable of over 400 km by AUV
740
Inspection of surface defects on engine cylinder wall using segmentation image processing technique
741
Inspection of surface defects using optimal FIR filters
742
Inspection of the Contact Block Reduction method for quantum transport simulation of FinFETs
743
Inspection of the contaminants at failed connector contacts
744
Inspection of the Current-Mirror Mismatch by Secondary Electron Potential Contrast With In Situ Nanoprobe Biasing
745
Inspection of the Delamination of Magnetic and Non-Magnetic Conducting Layers Using NDT
746
Inspection of the Geometry of Objects through Structured Light and Stereo Vision
747
Inspection of the objects on the sea floor by using 14 MeV tagged neutrons
748
Inspection of thin-film solar cell processing by laser-induced breakdown spectroscopy and neural networks
749
Inspection of through silicon vias (TSV) and other interconnections in IC packages by computed tomography
750
Inspection of through silicon vias (TSV) and other interconnections in IC packages by computed tomography
751
Inspection of ultrasonic welding for thermoplastic materials joining
752
Inspection of Visible and Invisible Features of Objects with Image and Sound Signal Processing
753
Inspection of water mark on currency note by using correlation mapping and neural network
754
Inspection of Wooden Poles in Electrical Power Distribution Networks in Southern Brazil
755
Inspection of Yarn Nep Based on Wavelet Analysis
756
Inspection on project superviser by real estate developer based on game theory
757
Inspection optimization for excursion and baseline defect monitoring in a manufacturing environment
758
Inspection planning control of laser guided measurement robot
759
Inspection planning for customer-driven manufacturing environments with modular inspection stations
760
Inspection planning for mission-critical quality
761
Inspection planning for sensor coverage of 3D marine structures
762
Inspection Procedures For MIL-E-lB Reliable Electron Tubes
763
Inspection processes must compliment systems inspected
764
Inspection processes must compliment systems inspected [aircraft maintenance]
765
Inspection recipe management based on captured defect distribution
766
Inspection reliability 1996: issues now and for the millenium
767
Inspection Reliability: State-of-the-art
768
Inspection research about the relationship between the profits efficiency of commercial bank and stock return
769
Inspection resistant memory: Architectural support for security from physical examination
770
Inspection Risk and Delay for Screening Cargo Containers at Security Checkpoints
771
Inspection Robot for Hanger Cable of Suspension Bridge: Mechanism Design and Analysis
772
Inspection robot for spherical storage tanks
773
Inspection schedule optimization technique for power distribution facilities
774
Inspection sensitivity improvement by wafer sort failure sites matching algorithm — Chimin Chen
775
Inspection step modeling for defect source tool identification using defectivity control
776
Inspection system based on artificial vision for paint defects detection on cars bodies
777
Inspection system for detecting defects in a transistor using Artificial neural network (ANN)
778
Inspection system for fine gate patterns of GaAs-FET
779
Inspection system for very thin and fragile surfaces, based on a pair of wall climbing robots with magnetic wheels
780
Inspection Technique for Cleaved Optical Fiber Ends Based on Fabry–Perot Interferometer
781
Inspection techniques applied to the metrology of aerodynamic models
782
Inspection technology to facilitate automated quality control of highly specular, smooth coated surfaces
783
Inspection Tool for Harsh Environment Operation Utilizing Pulsed Remote Field Technique
784
Inspection trip to submarine base at New London, Conn.
785
Inspection Trips 1986 Winter Meeting
786
Inspection Trips at Convention
787
Inspection using a line-scanning camera
788
Inspection, Maintenance and Repair of ATEX Equipment
789
Inspection, maintenance and repair of Ex apparatus
790
Inspection, maintenance and testing of electrical equipment for use in potentially explosive atmospheres
791
Inspection, testing and verification [of electrical installations]
792
Inspection. Examining holes in machine parts
793
Inspection/test impact on maintenance of generators
794
Inspection´s role in software quality assurance
795
Inspection-planning development: an evolutionary approach using reliability engineering as a tool
796
Inspection-Resistant Memory Architectures
797
Inspections and historical data in teaching software engineering project course
798
Inspective techniques for assessing the pollution threat of sunken world war II tankers
799
Inspector Gadget: Automated Extraction of Proprietary Gadgets from Malware Binaries
800
INSPECTOR: A Computer Vision System that Learns to Inspect Parts
801
INSPECTOR: Integrated Service Platform for Management of Academic and Research Communities over the Internet
802
Inspector-Executor Load Balancing Algorithms for Block-Sparse Tensor Contractions
803
Inspectors Are Not Judges
804
InspectorX: A game for software inspection training and learning
805
Inspecttiion off Saxophone Reeds Employing a Novell Planar Electromagnetic Sensing Technique
806
INSPEX ´77
807
Inspex ´83 - an aid to quality improvement
808
Inspiration discovery based on related domains
809
Inspiration drawn from the deep
810
Inspiration for the dividing of emergency planning zone from Fukushima nuclear accident
811
Inspiration from an Analysis of the British and American Quality Assurance System of Distance Higher Education
812
Inspiration from Nature [Random Inputs]
813
Inspiration from Nature for Voice Synthesis and Spectral Analysis
814
Inspiration from Nature II [Random Inputs]
815
Inspiration of educational information ecology to construct education information system
816
Inspiration of Henry Moore´s sculptures to fundamental modeling courses
817
Inspiration of Traditional Ash-Bashing Pictures to Image Design of Two-Dimensional Animation
818
Inspiration on modern furniture design in China from Nordic furniture design concept
819
Inspiration produced by bilateral electromagnetic, cervical phrenic nerve stimulation in man
820
Inspiration, Socialization, and Skill Acquisition in an Amateur Multimedia Community
821
Inspirations for office document formats from web office
822
Inspirations from U.S. subprime lending crisis to credit risk management of Chinese commercial banks
823
Inspiratory and expiratory flow rates determination using a single spirolog type flow sensor
824
Inspiratory Pressure Evaluation by means of the Entropy of Respiratory Mechanomyographic Signals
825
IN-SPIRE InfoVis 2004 Contest Entry
826
INSPIRE Ontology Handler: Automatically building and managing a knowledge base for Critical Information Infrastructure protection
827
InSPIRE System: An Activity-Based Platform for Managing and Monitoring Biomedical Research
828
INSPIRE: A Framework for Incremental Spatial Prefix Query Relaxation
829
INSPIRE: A New Method of Mapping Information Spaces
830
INSPIRE: An Integrated Agent Based System for Hypothesis Generation within Cancer Datasets
831
INSPIRE: an interactive image assisted non-photorealistic rendering system
832
INSPIRE: Integrated co-simulation of power and ICT systems for real-time evaluation
833
Inspire: Linking graduate students with K12 teachers to address remote sensing educational needs
834
INSPIRE: the insieme parallel intermediate representation
835
INSPIRED Broadening Participation in Computing: Most successful strategies and lessons learned
836
Inspired by Bertillon - Recognition based on anatomical features from 3D face scans
837
Inspired Counter Based Broadcasting for Dynamic Source Routing in Mobile Networks
838
INSPIRED: Promoting diversity, retention, outreach and globalization readiness
839
INSPIRE-DB: Intelligent Networks Sensor Processing of Information Using Resilient Encoded-Hash DataBase
840
Inspiring and Enabling Members: Hashimoto sets goals for 2015 [Amperes: Current Affairs from Around the World]
841
Inspiring and Modeling Multi-Robot Search with Particle Swarm Optimization
842
Inspiring Computer Mouse
843
Inspiring creativity for the Engineer of 2020
844
Inspiring electrical engineering students through fully-engaged hands-on learning
845
Inspiring energy conservation through open source metering hardware and embedded real-time load disaggregation
846
Inspiring energy conservation through open source power monitoring and in-home display
847
Inspiring Engineering Minds to Advance Human Health: The Henry Samueli School of Engineering´s Department of BME
848
Inspiring future engineers and scientists [President´s column]
849
Inspiring future female scientists
850
Inspiring innovation
851
Inspiring Innovative Design Integration by Collaborative Exploration of Boolean Operations
852
Inspiring inventive genius in middle and high school students with chain-reaction STEAM Machines™
853
Inspiring modeling
854
Inspiring New Research in the Field of Signal Processing in the Encrypted Domain [From the Guest Editors]
855
Inspiring professional lifelong excellence in ICT skills development
856
Inspiring Students to Study Independently and to Foster Team Spirit
857
Inspiring sustainable decision-making through strategic communications planning
858
Inspiring the Underrepresented: Rosentrater is a role model, mentor, and teacher [Women to Watch]
859
Inspiring tomorrow´s energy workforce today: How the energy industry connects with students of all ages
860
Inspiring undergraduate students in engineering learning, comprehending and practicing by the use of analog discovery kits
861
Inspiring Women in STEM [Women in Engineering]
862
INSPORAMA: INS-Aided Misalignment Correction in Feature-Based Panoramic Image Stitching
863
Instabilities and chaos in semiconductor lasers with optical injection
864
Instabilities and nonlinear L-I characteristics in complex-coupled DFB lasers with antiphase gain and index gratings
865
Instabilities and pattern formation of coupled nonlinear fields: classical and quantum signatures
866
Instabilities and Phase Dynamics in a Laser with a Saturable Absorber
867
Instabilities and resonances of actively and passively loaded antennas
868
Instabilities and rogue waves in non-linear fiber optics
869
Instabilities and Statistical Behavior of Low Current Cold Cathode Arcs
870
Instabilities and transport in plasmas with EXB drift
871
Instabilities caused by floating-point arithmetic quantization
872
Instabilities control of reliability analysis using hybrid HL-RF and conjugate optimization algorithms
873
Instabilities diagnosis and the role of K in microwave circuits
874
Instabilities due to bifurcation of switching times in a thyristor controlled reactor
875
Instabilities due to mechanical strain energy in superconducting magnets
876
Instabilities for quantum-cascade lasers under self-phase modulation
877
Instabilities in a complex DC plasma
878
Instabilities in a drifting semiconductor plasma
879
Instabilities in a Gaussian Cavity Mode Laser Model with Gaussian Pump Profile
880
Instabilities In A Microwave Driven Cold Multi-fluid Plasma Slab
881
Instabilities In A Microwave Driven Cold Multi-fluid Plasma Slab
882
Instabilities in a rotating hollow beam
883
Instabilities in Amorphous Oxide Semiconductor Thin-Film Transistors
884
Instabilities in a-Si-H solar cells: materials and device issues
885
Instabilities in avalanche diodes under quasistationary and under transit-time conditions
886
Instabilities in birefringent and periodic optical fibres
887
Instabilities in Capacitively Coupled Plasmas Driven by Asymmetric Trapezoidal Voltage Pulses
888
Instabilities in Capacitively Coupled Radio-Frequency Discharges
889
Instabilities in current-mode controlled switching voltage regulators
890
Instabilities in deep submicron SRAM
891
Instabilities in Double Dielectric Structures
892
Instabilities in dual stepping motor systems
893
Instabilities in dusty negative ion plasmas
894
Instabilities in foil implosions and the effect on radiation output
895
Instabilities in inhomogeneous complex plasma
896
Instabilities in learning automata playing games with delayed information
897
Instabilities in low pressure inductive discharges with attaching gases
898
Instabilities in magnetically insulated ion diodes
899
Instabilities in modern bipolar transistors during the turn-off under inductive loads
900
Instabilities in MODFET´s and MODFET circuits
901
Instabilities in modulation doped field-effect transistors (MODFETs) at 77 K
902
Instabilities in multi-strand AC superconducting cables caused by longitudinal magnetic field with transverse magnetic field
903
Instabilities in numerical inversion of Laplace transforms using Taylor series approach
904
Instabilities in optically-pumped 1300nm dilute nitride spin-VCSELs: Experiment and theory
905
Instabilities in oxide semiconductor transparent thin film transistors
906
Instabilities In Piezoelectric Properties Of Ceramic Sensors And Actuators Under Extreme Conditions
907
Instabilities in PTC Resistors
908
Instabilities in quantum dot semiconductor lasers at 1.3 μm
909
Instabilities in RF-power amplifiers caused by a self-oscillation in the transistor bias network
910
Instabilities in Self-Focused Electron Beams
911
Instabilities in semiconductor laser with optical feedback and modulation
912
Instabilities in Silicon Power Devices: A Review of Failure Mechanisms in Modern Power Devices
913
Instabilities in some nematic products of positive dielectric anisotropy
914
Instabilities in Spin-Polarized Vertical-Cavity Surface-Emitting Lasers
915
Instabilities in the doubly resonant parametric oscillator: A theoretical analysis
916
Instabilities in the electron flow along magnetically insulated transmission lines
917
Instabilities in the electron flow along magnetically insulated transmission lines
918
Instabilities in the feedback linearization of a double inverted pendulum
919
Instabilities in the near wake of a rod with an anchored flame
920
Instabilities in the Proposed TRIUMF KAON Factory Synchrotrons
921
Instabilities in the SNS
922
Instabilities in transformer-coupled Cuk-converters and their solution at higher power levels
923
Instabilities in transport current measurements of Nb
3
Sn strands
924
Instabilities in two phase and supercritical water natural circulation accident tolerant fuel system
925
Instabilities in Varactor Multipliers
926
Instabilities induced by electron trapping/detrapping in high-k gate dielectrics of Flash memories: Evaluation and suppression
927
Instabilities of a boost converter system under large parameter variations
928
Instabilities of a boost converter system under large parameter variations
929
Instabilities of charged particle beams in plasmas
930
Instabilities of cooled antiproton beam in recycler
931
Instabilities of coupled-cavity mode-locked lasers
932
Instabilities of high-current charged particle beams transported through dense plasmas
933
Instabilities of Hydrogen/Air Outwardly Propagating Spherical Laminar Premixed Flames
934
Instabilities of impregnated windings induced by epoxy cracking
935
Instabilities of inertial transport in semiconductors
936
Instabilities of InP 3-level transferred-electron oscillators
937
Instabilities of magnetic fluids leading to a rupture of continuity
938
Instabilities of multimode vector solitons in saturable nonlinear media
939
Instabilities of push-pull magnetic amplifiers feeding the field of an electric machine
940
Instabilities of SiC MOSFETs during use conditions and following bias temperature stress
941
Instabilities of Spatially Coupled Nd: YVO/sub 4/Microchip Lasers
942
Instabilities of Stripe and Ring Solitary Waves due to Propagation in Quadratic Nonlinear Media
943
Instabilities of two liquid drops in contact
944
Instabilities study and implications for the RIA project
945
Instabilities Within Complex Plasmas
946
Instability analysis and robust adaptive control of robotic manipulators
947
Instability analysis and robust adaptive control of robotic manipulators
948
Instability analysis in MRP with tabu search
949
Instability Analysis of a Three-Port Network
950
Instability analysis of an active higher-harmonic cavity
951
Instability analysis of fluid and elastic panel system based on the differential quadrature method
952
Instability analysis of forced circulation evaporative cooling ECRIS solenoids
953
Instability Analysis of Multimedia Systems
954
Instability Analysis of Obliquely Propagating Positron-Acoustic Solitary Waves in Superthermal Plasmas
955
Instability analysis of the charged liquid interface
956
Instability Analysis of Uncertain Systems via Determinants and LMIs
957
Instability analysis of Villa Arianna site in Castellammare di Stabia (Naples)
958
Instability analysis on a high power Ka-band rectangular double-grating sheet beam BWO
959
Instability and Abstractness Metrics Based on Responsibility
960
Instability and bifurcation in parallel-connected buck converters under a master-slave current sharing scheme
961
Instability and chaos in a current-mode controlled Cuk converter
962
Instability and deadlock of distributed dynamic channel allocation
963
Instability and dynamics of thermal runaway of thermoresistive microsensors
964
Instability and Emittance Growth in High-Current Heavy Ion Beam Bunching
965
Instability and failure analysis of film-substrate structure under electrical loading
966
Instability and Failure Mechanisms of Small Area, Nitride-Defined Schottky Barrier Diodes, in LSI Applications
967
Instability and geometric transience of the aloha protocol
968
Instability and overshoots of solutions for a class of homogeneous hybrid systems by Lyapunov-like analysis
969
Instability and Schroedinger Cat-Like States in Third Harmonic Generation
970
Instability and transient responses of an electrooptic bistable device
971
Instability And Uncertainty Are Our Challenge
972
Instability calculations for the MIT-Bates South Hall Ring
973
Instability caused by the cubic potential in the foreign exchange market observed at the intervention by the Bank of Japan
974
Instability compensation of V/Hz PWM inverter-fed induction motor drives
975
Instability conditions for neutral type time delay systems
976
Instability criteria at interface regions of spherical cavities in solid dielectric cable
977
Instability criteria for Lur´e systems toward oscillation analysis of uncertain gene networks
978
Instability criterion to eliminate the Non-Detection Zone of the Sandia Frequency Shift method
979
Instability Detection and Fall Avoidance for a Humanoid using Attitude Sensors and Reflexes
980
Instability detector of a fragile neural network: Application to seizure detection in epilepsy
981
Instability driven by wall impedance in intense charged particle beams
982
Instability Dynamics of a Double-Pass Cavity with Nonlinear Feedback
983
Instability evaluation for permanent magnet biased magnetoresistive heads
984
Instability for organic field effect transistors caused by dipole on insulator surface
985
Instability growth in magnetically imploded high-conductivity cylindrical liners with material strength
986
Instability Growth Rate Calculations for High Energy Storage Rings
987
Instability Heating Of The HDZP
988
Instability Improvement in a Single Pole Head Using a Co-Zr-Nb Multi-Layered Main-Pole Film
989
Instability in a conditionally stable system
990
Instability in a nonlinear conditionally stable system subjected to a sinusoidal input
991
Instability in D-C Aircraft Systems
992
Instability in D-C aircraft systems
993
Instability in DOA manifold ambiguity resolution
994
Instability in h.v.d.c. schemes at low-order integer harmonics
995
Instability in Half-Bridge Circuits Switched With Wide Band-Gap Transistors
996
Instability in induction generator based wind farms connected to series compensated transmission lines
997
Instability in low energy beams extracted from BF
3
plasma
998
Instability in MCBG circuit as a linear stage of bifurcational transition between different dynamic modes
999
Instability in micromachined electrostatic torsion actuators with full travel range
1000
Instability in parallel job scheduling simulation: the role of workload flurries
