<< مقالات لاتين فني مهندسي >>
<< بر اساس عنوان >>
1
Reduction of Association Rules for Big Data Sets in Socially-Aware Computing
2
Reduction of asymmetry in all-optical wavelength-selective switch by amplitude control with single control light
3
Reduction of attenuation correction artifacts in PET-CT
4
Reduction of attenuation of e.m wave inside plasma formed during supersonic or hypersonic re-entry of missile like flight vehicles by the application of D.C magnetic field — A technique for mitigation of RF Blackout
5
Reduction of audible noise using asymmetrical bundles for 1000 kV transmission lines: full-scale test results of Akagi test line
6
Reduction of audible switching noise in induction motor drives using random position space vector PWM
7
Reduction Of Auger Recombination Current In Strained InGaAs/InGaAsP Ouanturn Well Diode Lasers
8
Reduction of augmentation order in pipelined realization of IIR filters by cascade/parallel form
9
Reduction of authentication cost based on key caching for inter-MME handover support
10
Reduction of authentication time in an anonymous credential system with proofs for monotone formulas on attributes
11
Reduction of automated test generation for Simulink/Stateflow to reachability and its novel resolution
12
Reduction of automotive audio noise due to ignition system
13
Reduction of automotive brake squeal through pad geometrical modifications: A numerical study
14
Reduction of autoregressive noise with shift-invariant wavelet-packets
15
Reduction of Average Path Length in Binary Decision Diagrams by Spectral Methods
16
Reduction of Azimuthal Amplitude Ripple in the Rotating-Mode Feed to a Radial Waveguide by Using a Crossed Dog-Bone Slot
17
Reduction of Bacillus Subtilis and Aspergillus Niger spores using nonthermal atmospheric gas discharges
18
Reduction of back radiation and cross-coupling in dual polarized aperture coupled patch antennas
19
Reduction of backgating effect in MBE-Grown GaAs/AlGaAs HEMT´s
20
Reduction of backgating in GaAs SISFET´s with a low-temperature buffer
21
Reduction of backgating in GaAs/AlGaAs MESFETs by optimisation of active-layer/buffer-layer interface
22
Reduction of background computations in adaptive block-matching motion estimation
23
Reduction of background noise from affected speech using a spectral subtraction algorithm based on masking properties of the human ear
24
Reduction of back-reflection induced power penalty by means of coherent seeding source with optical feedback in a loop-back WDM-PON
25
Reduction of backscattering error in an optical fiber gyro
26
Reduction of Backscattering Induced Noise by Carrier Suppression in Waveguide-Type Optical Ring Resonator Gyro
27
Reduction of backscattering noise in 2.5 and 10 Gbit/s RSOA-based WDM-PON
28
Reduction of backscattering-induced noise by ternary phase shift keying in resonator micro-optic gyro integrated on silica planar lightwave circuit
29
Reduction of backward radiation for CPW fed aperture stacked patch antennas on small ground planes
30
Reduction of ballistocardiogram artifact in the simultaneous acquisition of auditory event-related potentials and functional magnetic resonance images
31
Reduction of Bandwidth in Television Transmission Systems
32
Reduction of baroreflex blood pressure oscillations in 12-month-old SHR: Central and peripheral mechanisms
33
Reduction of baseband electrical memory effects using broadband active baseband load-pull
34
Reduction of base-collector capacitance by undercutting the collector and subcollector in GaInAs/InP DHBTs
35
Reduction of base-collector capacitance in InP/InGaAs HBT´s using a novel double polyimide planarization process
36
Reduction of baseline fluctuation in Electrocardiogram measurement for a car driver
37
Reduction of base-transit time of InP-GaInAs HBTs due to electron injection from an energy ramp and base-composition grading
38
Reduction of battery size and charge-discharge for active power smoothing of DFIG
39
Reduction of Be diffusion in GaAs by migration enhanced epitaxy, and the effect of heat treatment on the electrical activation and mobility
40
Reduction of beam breakup growth by bleeding cavities in linear accelerators
41
Reduction of beam dropout related defects in a hybrid scan implanter
42
Reduction of Beam Emittance by a Tapered-Foil Technique
43
Reduction of Beam-Hardening Artifacts in X-Ray CT
44
Reduction of Bearing Currents in Doubly Fed Induction Generators
45
Reduction of bend losses in Ti:LiNbO3 waveguides through MgO double diffusion
46
Reduction of bias in maximum likelihood ellipse fitting
47
Reduction of Biodiesel Cost Indirectly by Biological Treatment: Improving the Nutritive Value of Deoiled Jatropha Curcas Seed Meal for Potential Feed Use
48
Reduction of Bipolar Disturb of Floating-Body Cell (FBC) by Silicide and Thin Silicon Film Formed at Source and Drain Regions
49
Reduction of bistatic scattering matrix measurements for inversely symmetric radar targets
50
Reduction of bit error rate in high speed optical transmission systems due to optimized electrical drive pulse shaping
51
Reduction of bit error rate performance deterioration caused by stimulated Brillouin scattering in high-power CPFSK coherent optical transmission systems
52
Reduction of Bit Errors Due to Intertrack Interference Using LLRs of Neighboring Tracks
53
Reduction of Bitline to Control Gate Leakage for Improved Embedded 0.18 um FLASH Yield and Reliability
54
Reduction of bitrate by cost calculation and macroblock level thresholding technique in H.264 encoder
55
Reduction of bleed valve rate requirements for control of rotating stall using continuous air injection
56
Reduction of Bleed-Through Effect in Images of Chinese Bank Items
57
Reduction of blockage node and hidden terminal problem of CSMA/CA MAC protocol using directional antenna
58
Reduction of blocking artifact in block-coded images using wavelet transform
59
Reduction of blocking artifacts by a modeled lowpass filter output
60
Reduction of blocking artifacts by adaptive DCT coefficient estimation in block-based video coding
61
Reduction of Blocking Artifacts for HDTV using Offset-and-Shift Technique
62
Reduction of blocking artifacts for low bit-rate video coding using regularized dequantization
63
Reduction of blocking artifacts in block transformed compressed color images
64
Reduction of blocking artifacts in image and video coding
65
Reduction of blocking artifacts in MPEG-2 video using a block classification technique
66
Reduction of blocking effect in image coding
67
Reduction of blocking effect in transform domain using neural network
68
Reduction of blocking effects in image coding with a lapped orthogonal transform
69
Reduction of Blocking in Arbitrary Meshed Wdm Networks through a Biased Routing Approach
70
Reduction of blocking in arbitrary meshed WDM networks through a biased routing approach
71
Reduction of block-transform image coding artifacts by using local statistics of transform coefficients
72
Reduction of body weight through nutrition intervention reduces chronic low back pain
73
Reduction of Boiler Feed Pump Noise in an 800 MW Coal-Fired Generating Unit
74
Reduction of boiling thermal hysteresis in immersed electronics cooling on micro-configured graphite-metal conposite surfaces
75
Reduction of boron diffusion in silicon-germanium by fluorine implantation
76
Reduction of Both Harmonic Current and Torque Ripple for Dual Three-Phase Permanent-Magnet Synchronous Machine Using Modified Switching-Table-Based Direct Torque Control
77
Reduction of boundary artifacts in image restoration
78
Reduction of breakdown appearance by automatic geometry optimization
79
Reduction of breast biopsies with a modified self-organizing map
80
Reduction of broadband noise in speech by spectral weighting
81
Reduction of broad-band noise in speech by truncated QSVD
82
Reduction of Bromate and Natural Organic Matters (NOM) During the Transition from Fresh Granular Activated Carbon (GAC) to Biological Activated Carbon (BAC)
83
Reduction of buffer leakage current in AlGaN/GaN high-electron-mobility-transistor structure on Si substrate by reducing the dislocation density in AlN buffer layer
84
Reduction of Buffering Requirements: Another Advantage of Cooperative Transmission
85
Reduction of bulk and surface recombination in GaAs for improved solar cell performance
86
Reduction of Bulk Oxide Trapping in poly-Si Gated MOS Capacitors by Fluorination
87
Reduction of bus transitions with partial bus-invert coding
88
Reduction of cable resistance by helical-ridge type fairing
89
Reduction of cable-joint temperatures by oscillation of oil in the conductor duct a theoretical study
90
Reduction of calculation time in gear shaving simulation
91
Reduction of call drop-outs during handoffs using efficient signal strength prediction algorithms for personal communication systems
92
Reduction of carbon influx by minimizing tile heating in DIII-D
93
Reduction of carbon proximity effects by including AIGaN back barriers in HEMTs on free-standing GaN
94
Reduction of cardinal effects in SAR imagery of densely populated urban areas by suppressing strong multiple returns
95
Reduction of carrier depletion in p/sup +/ polysilicon gates using laser thermal processing
96
Reduction of carrier reflection effects in a silicon MBE p+-s-n+ device using cascaded end regions
97
Reduction of carrier-interface-phonon scattering near metal-semiconductor interfaces for phonon frequencies below the plasmon frrequency
98
Reduction of carrier-to-interference ratio in fixed broadband wireless access networks employing beam-switched base station antennas
99
Reduction of catastrophic forgetting with transfer learning and ternary output codes
100
Reduction of cavitation using pseudorandom signals [therapeutic US]
101
Reduction of cavity resonances in MoM solutions of EM problems
102
Reduction of cavity-to-cavity power/ground noise coupling through plane cutout in multilayer PCBs
103
Reduction of CC-Tables Using Multiple Implication
104
Reduction of channel hot-electron-generated substrate current in sub-150-nm channel length Si MOSFET´s
105
Reduction of channel power instabilities in Raman amplifiers for ROADM configured WDM networks
106
Reduction of characteristic deviations due to parasitic elements on integrator-based filters
107
Reduction of charge exchange effects on the VIISta810
108
Reduction of charge transfer region using graphene nano-ribbon geometry for improved complementary FET performance at sub-micron channel length
109
Reduction of Charge Trapping in \\hbox {HfO}_{2} Film on Ge Substrates by Atomic Layer Deposition of Various Passivating Interfacial Layers
110
Reduction of charge trappings and electron tunneling in SIMOX by supplemental implantation of oxygen
111
Reduction of charge-transport characteristics of SiGe dot floating gate memory device with ZrO2 tunneling oxide
112
Reduction of charging damage of gate oxide by time modulation bias method
113
Reduction Of Charging Damage Through Substrate Potential Control
114
Reduction of chirped fiber grating group delay ripple penalty through UV post processing
115
Reduction of Chromatic Dispersion Effects and Linearization of Dual-Drive Mach-Zehnder Modulator by Using Semiconductor Optical Amplifier in Analog Optical Links
116
Reduction of circuit complexity by elimination of internal nodes in the circuit modeling of planar interconnection structures
117
Reduction of Circular Artefacts in Fan-Beam Scanners
118
Reduction of circulating current flow in parallel operation of APF based on hysteresis current control
119
Reduction of circulating current of double converter configuration for additional regeneration
120
Reduction of cladding mode coupling losses in fiber Bragg gratings
121
Reduction of classes of robust stabilization problems to classical H∞ problems
122
Reduction of Close-to-Carrier Phase Noise in Surface Acoustic Wave Resonators
123
Reduction of clutter contamination in radar cross section measurements using independent components analysis
124
Reduction of CM Noise Emissions From PLC Modem Using Optically Coupled Signaling
125
Reduction of CMOS Inverter Ring Oscillator Close-in Phase Noise by Current Mode Instead of Voltage Mode Supply
126
Reduction of CMOS power consumption and signal integrity issues by routing optimization
127
Reduction of CMP μ-scratch induced metal shorts by introduction of a post CMP tungsten plasma clean process in a high volume DRAM manufacturing environment
128
Reduction of CMP-induced wafer defects through in-situ removal of process debris
129
Reduction of CNT Interconnect Resistance for the Replacement of Cu for Future Technology Nodes
130
Reduction of CO2 emissions due to wind energy - methods and issues in estimating operational emission reductions
131
Reduction of CO2-laser-induced thermal lensing in CS2with a DC electric field
132
Reduction of CO2 from combustion gases by DC corona torches
133
Reduction of CO2 from combustion gases by DC corona torches
134
Reduction of Coalition Structure´s Search Space Based on Domain Information: An Application in Smart Grids
135
Reduction of coaxial feed between two parallel conductors into finite number of voltage sources
136
Reduction of co-channel interference by optimum distributed of transmitter powers
137
Reduction of co-channel interference in a mobile system by antenna parameter optimization
138
Reduction of cochannel interference in cellular systems by intra-zone channel reassignment and adaptive transmitter power control
139
Reduction of cochannel interference on the forward link CDMA systems
140
Reduction of Co-Channel Television Interference By Precise Frequency Control of Television Picture Carriers
141
Reduction of Cochannel Television Interference by Very Precise Offset Carrier Frequency
142
Reduction of coding artifacts in low-bit-rate video coding
143
Reduction of coding artifacts in transform image coding
144
Reduction of coding artifacts in transform image coding by using local statistics of transform coefficients
145
Reduction of coding artifacts using chrominance and luminance spatial analysis
146
Reduction of coercivity in FePt/FeRh bilayer films by heating
147
Reduction of coercivity in FePt-FeRh bilayer films by heating
148
Reduction of Cogging Force in a Linear Flux-Switching Permanent-Magnet Brushless AC Machine for Direct-Drive Applications
149
Reduction of cogging force in an electromechanical transducer powering an MR linear damper
150
Reduction of Cogging Force in Linear Permanent-Magnet Generators
151
Reduction of cogging force in PM linear motors by pole-shifting
152
Reduction of cogging force in slotless linear permanent magnet motors
153
Reduction of cogging forces in a tubular linear synchronous motor by optimising the secondary design
154
Reduction of cogging forces in linear synchronous motors
155
Reduction of cogging torque and back EMF harmonics in modulated pole machine by variations in tooth span
156
Reduction of cogging torque and EMF harmonics in modulated pole machines
157
Reduction of cogging torque and torque ripple in Modulated Pole Machines by geometrical changes
158
Reduction of cogging torque by adopting semi circled permanent magnet
159
Reduction of Cogging Torque Due to Production Tolerances of Rotor by Using Dummy Slots Placed Partially in Axial Direction
160
Reduction of cogging torque due to production tolerances of rotor by using partially placed dummy slots in axial direction
161
Reduction of Cogging Torque in Double-Rotor Axial-Flux Permanent-Magnet Disk Motors: A Review of Cost-Effective Magnet-Skewing Techniques With Experimental Verification
162
Reduction of cogging torque in flux-reversal machine by rotor teeth pairing
163
Reduction of cogging torque in flux-reversal machine by rotor teeth pairing
164
Reduction of cogging torque in interior-magnet brushless machines
165
Reduction of cogging torque in interior-magnet brushless machines
166
Reduction of cogging torque in permanent magnet motors
167
Reduction of cogging torque in PMBLDC motor with reduced stator tooth width and bifurcated surface area using Finite Element analysis
168
Reduction of Cogging Torque in PMBLDC Motor with Reduced Stator Tooth Width and Bifurcated Surface Area Using Finite Element Analysis
169
Reduction of cogging torque in spindle motors for CD-ROM drive
170
Reduction of cogging torque in surfacemounted permanent magnet brushless motor based on Motorsolve
171
Reduction of cogging torque of PMBLDC motor by changes in active surface area
172
Reduction of cogging torque of single phase brushless DC motor using flux barrier
173
Reduction of Cognitive Load Through the Addition of High-Level Semantics to ReactoGraph
174
Reduction of coherent crosstalk in WDM add/drop multiplexing nodes by bit pattern misalignment
175
Reduction of collapsing loss
176
Reduction of collision induced timing jitter in multichannel soliton systems by dispersion management
177
Reduction of color bleeding for 4:1:1 compressed video
178
Reduction of color variability in color image segmentation
179
Reduction of Colour Artifacts Using Inverse Demosaicking
180
Reduction of common mode currents generated by three-level inverters with consideration of motor overvoltages
181
Reduction of common mode currents in PWM inverter motor drives
182
Reduction of Common Mode EMI in a Full-Bridge Converter through Automatic Tuning of Gating Signals
183
Reduction of Common Mode EMI in a PWM Inverter through Fine-Tuning Gating Signals
184
Reduction of common mode voltage and current in voltage source inverters by passive methods
185
Reduction of common mode voltage in three phase inverter
186
Reduction of Common-Mode and Differential-Mode Noises Using Timing-Offset Differential Signal
187
Reduction of common-mode current in parallel connected PV-inverters with negative grounding
188
Reduction of common-mode currents in PWM inverter motor drives
189
Reduction of common-mode electromagnetic interference in isolated converters using Negative feedback
190
Reduction of common-mode voltage generated by voltage-source inverter using proper PWM strategy
191
Reduction of common-mode voltage in an indirect matrix converter with imposed sinusoidal input/output waveforms
192
Reduction of Common-Mode Voltage in Five-Phase Induction Motor Drives Using Predictive Control Techniques
193
Reduction of common-source inductance in FET/HEMT structures utilizing wave-propagation effects
194
Reduction of communication delays in hypercube programs based on run time statistics
195
Reduction of communication quantity for network based parallel GA
196
Reduction of commutation torque ripple in a brushless DC motor drive
197
Reduction of complex safety models based on Markov chains
198
Reduction of Complexity and Automation of Parallel Execution through Loop Level Parallelism
199
Reduction of complexity for a robust fuzzy controller
200
Reduction of complexity for digital beamforming in high-altitude-platform and satellite systems
201
Reduction of Complexity for Nonbinary LDPC Decoders With Compressed Messages
202
Reduction of complexity for the analysis of human-machine-interaction
203
Reduction of Complexity via Operatorial Parametric Formulations for Some Nonlinear Dynamic Problems of Biology
204
Reduction of Computation and Control Costs for Opportunistic Scheduling in Slotted DS-CDMA Uplinks
205
Reduction of computation in pole-zero modeling of speech signals
206
Reduction of Computation in TDM-FDM Transmultiplexer
207
Reduction of Computational Complexity and Sufficient Stack Size of the MLSDA by Early Elimination
208
Reduction of computational complexity in the butterfly search technique [ultrasonic blood flow imaging]
209
Reduction of computational complexity in two-step SOVA decoder for turbo code
210
Reduction of computational complexity of Hough transforms using a convolution approach
211
Reduction of computational cost for high quality video scaling
212
Reduction of computational cost in DFT implementation of FIR digital filters
213
Reduction of computational cost in driving simulation subsystems using approximation techniques
214
Reduction of Computing Time for Steady-State Solutions of Magnetic Field and Circuit Coupled Problems Using Time-Domain Finite-Element Method
215
Reduction of conducted electromagnetic interference in SMPS using programmable gate driving strength
216
Reduction of conducted EMC using busbar stray elements
217
Reduction of conducted EMI for SiC JFET inverters by separating heat sinks
218
Reduction of conducted EMI levels in an lighting appliance to meet applicable regulatory limits-a case study
219
Reduction of conducted emission for UPSs using passive EMI filters
220
Reduction of conducted emission noise using various power supply filters
221
Reduction of conducted emissions and motor bearing currents in current source PWM inverter drives
222
Reduction of Conducted Interference by Steel Armor in Buried Cables: Measurements and Modeling
223
Reduction of confounding effects with voxel-wise Gaussian process regression in structural MRI
224
Reduction of confusion pairs on different rates of speech in Telugu language
225
Reduction of congestion and signal waiting time
226
Reduction of Connections for Multibus Organization
227
Reduction of conservatism in mixed H2/H∞ control design
228
Reduction of Conservatism in Worst Case Designs: Systems with Block Diagonal Uncertainty Structure
229
Reduction of constraint networks based on local consistency
230
Reduction of contact force dependence on the MEMS hardness sensor using reference plane to detect human body hardness
231
Reduction of contact resistance at terminations of bismuth wire arrays
232
Reduction of continuous and pulse-shape noise by digital signal processing for reliable PD detection in HV substations
233
Reduction of contradictory partial occlusion in mixed reality by using characteristics of transparency perception
234
Reduction of control input variance of feed drive systems using sliding-mode control with non-linear sliding surface
235
Reduction of Control Torques of Mobile Robot Using Hybrid Nonlinear Position Controller
236
Reduction of controller complexity in nonlinear H∞ control
237
Reduction of controller fragility by pole sensitivity minimization
238
Reduction of converter rating for a delta-connected STATCOM by optimizing phase harmonic references
239
Reduction of converter rating for new induction generator system by 3rd harmonic injection
240
Reduction of copper content from dip-type lead-free soldering bath
241
Reduction of copper oxides via an atmospheric pressure plasma torch
242
Reduction of copper winding in synchronous machines with improved performances
243
Reduction of core loss in the distributed winding IPMSM for ISG application
244
Reduction of core network signalling overhead in cluster based LTE small cell networks
245
Reduction of correlated noise using a library of orthonormal bases
246
Reduction of correlation computation in the permutation of the frequency domain ICA by selecting DOAs estimated in subarrays
247
Reduction of cosite interference for digital FM frequency hopping radios
248
Reduction of cost and losses of transformers by using composite magnetic cores
249
Reduction of cost by implementing transparency in cloud computing through different approaches
250
Reduction of coupling capacitance, using a capacitor-transistor coupling circuit
251
Reduction of coupling coefficients for distributed Bragg reflection in corrugated narrow-rib waveguides
252
Reduction of coupling effects by optimizing the 3-D configuration of the routing grid
253
Reduction of Cr(VI) by Nanoscale Zero Valent Iron (nZVI): The Reaction Kinetics
254
Reduction of Cracking in Tl3VS4(TVS) Single Crystals
255
Reduction of critical current density for spin transfer magnetization switching in a spin-valve nano-pillar
256
Reduction of cross polarization for circularly polarized broadband waveguide antenna
257
Reduction of cross-coupling between X-Y axes of piezoelectric scanner stage of atomic force microscope for faster scanning
258
Reduction of cross-gain modulation in the semiconductor optical amplifier by using wavelength modulated signal
259
Reduction of cross-phase modulation-induced impairments in long-haul WDM telecommunication systems via spectral inversion
260
Reduction of cross-phase-modulation-induced crosstalk by using chirped fiber grating in WDM AM-VSB CATV transmission systems
261
Reduction of crosspoints in one-sided crosspoint switching networks
262
Reduction of cross-polarization in contoured beam reflectarrays using a three-layer configuration
263
Reduction of cross-polarization radiation of E-shaped microstrip antenna array using spiral-ring resonator
264
Reduction of crosstalk and losses of intersecting waveguide
265
Reduction of Crosstalk Between Dual Power Amplifiers Using Laser Treatment
266
Reduction of crosstalk by hole-walled multi-core fibers
267
Reduction of crosstalk by quasi-homogeneous solid multi-core fiber
268
Reduction of crosstalk by trench-assisted multi-core fiber
269
Reduction of crosstalk impact on WDM system performance employing optical Fourier transformers
270
Reduction of crosstalk in a photonic space division switching network employing traveling wave amplifiers and automatic power control
271
Reduction of cross-talk in high speed digital circuits using novel structured microstrips
272
Reduction of crosstalk in mixed CNT bundle interconnects for high frequency 3D ICs and SoCs
273
Reduction Of Crosstalk In Mixed Signal Integrated Circuits
274
Reduction of crosstalk in RC modeled interconnects with low power encoder
275
Reduction of crosstalk in semiconductor optical amplifiers by amplifying dispersed WDM signals (7/spl times/20 Gb/s)
276
Reduction of crosstalk in stereoscopic displays
277
Reduction of crosstalk interference in local digital transmission
278
Reduction of crosstalk noise between interconnect lines in CMOS RF integrated circuits
279
Reduction of crosstalk noise by optimizing 3-D configuration of the routing grid
280
Reduction of crosstalk noise in modular jack for high-speed differential signal interconnection
281
Reduction of crosstalk on printed circuit board using genetic algorithm in switching power supply
282
Reduction of Crosstalk Pessimism Using Tendency Graph Approach
283
Reduction of Crown Sensitivity on Disk Shape Induced Flying Height Variation Through ABS Design
284
Reduction of crystal defects in active layers of GaAs-AlGaAs double-heterostructure lasers for long-life operation
285
Reduction of crystalline defects to 50/cm/sup 2/ in epitaxial layers over porous silicon for ELTRAN/sup R/ process
286
Reduction of CT artifacts due to respiratory motion in a slowly rotating SPECT/CT
287
Reduction of current and flux distortions of VSI-fed induction motors with direct self-control
288
Reduction of Current and Rise in Temperature of Lithium Ion Battery by Combining with Lithium Ion Capacitor
289
Reduction of Current and Rise in Temperature of Lithium Ion Battery Combined with Lithium Ion Capacitor
290
Reduction of current carrying capacity in multistrand superconducting cables at changing current
291
Reduction of current collapse in AlGaN/GaN HFETs using AlN interfacial layer
292
Reduction of Current Collapse in GaN High-Electron Mobility Transistors Using a Repeated Ozone Oxidation and Wet Surface Treatment
293
Reduction of current density at disk electrode periphery by shaping current pulse edges
294
Reduction of current distortions of VSI-fed induction machine controlled by DSC method-generalized approach
295
Reduction of Current Harmonic Distortion in Three-Phase Grid-Connected Photovoltaic Inverters via Resonant Current Control
296
Reduction of current leakage in chemical-vapor deposited Ta2O5 thin-films by oxygen-radical annealing [DRAM dielectric]
297
Reduction of Current Mismatch in PLL Charge Pump
298
Reduction of current ripple and acoustic noise in dual-inverter pole-changing induction motor drives
299
Reduction of current ripples due to current measurement errors in a Doubly Fed Induction Generator
300
Reduction of damping in high-speed semiconductor lasers
301
Reduction of dark current for multi quantum wells solar cells
302
Reduction of dark current in AlGaN-GaN Schottky-barrier photodetectors with a low-temperature-grown GaN cap layer
303
Reduction of dark current in photodiodes by the use of a resonant cavity
304
Reduction of data prevention cost and improvement of reliability in MLC NAND flash storage system
305
Reduction of DC bus capacitor ripple current with PAM/PWM converter
306
Reduction of DC drift in LiNbO3 optical waveguide devices by ion exchange
307
Reduction of DC drift in LiNbO3 waveguide electro-optic devices by phosphorus doping in SiO2 buffer layer
308
Reduction of DC link capacitor stress for double three-phase drive unit through shifted control and phase displacement
309
Reduction of DC-bus capacitor ripple current with PAM/PWM converter
310
Reduction of DC-bus voltage ripples and capacitors for single-phase PWM-controlled rectifiers
311
Reduction of dc-link capacitance for three-phase three-wire shunt active power filters
312
Reduction of DC-link capacitance in bridgeless PFC boost rectifiers
313
Reduction of DC-link capacitor in case of cascade multilevel converters by means of reactive power control
314
Reduction of Dead Times and Dead Zones in the Self-Quenching Streamer Mode at High Pressures and High Quencher Concentrations
315
Reduction of decentralized control problems to tractable representations
316
Reduction of decision error in track identification by utilization of data fusion
317
Reduction of decoding complexity of trellises for BCM
318
Reduction of defect densities of variously doped InP
319
Reduction of defects caused by chemical mechanical polishing of oxide surfaces and contamination of the wafer bevel
320
Reduction of defects in RF-MBE grown GaN on sapphire by optimization of nitridation temperature and intermediate layer parameters
321
Reduction of Delay between Particle Passage and Spark Chamber Spark
322
Reduction of Delay Distortion in a Horn-Reflector Antenna System Employing Overmoded-Waveguide Feeder
323
Reduction of delays in reactive routing protocol for unobservable mobile ad-hoc networks
324
Reduction of demagnetizing effects under nonuniform hard-axis drive in uniaxial thin films
325
Reduction of dental filling metallic artifacts in CT-based attenuation correction of PET data using weighted virtual sinograms
326
Reduction of Depth of Boolean Networks with a Fan-In Constraint
327
Reduction of depth variation in an Si etching process by applying an optimized run-to-run control system
328
Reduction of design complexity using virtual hardware platforms
329
Reduction of Detected Acceptable Faults for Yield Improvement via Error-Tolerance
330
Reduction of detent force caused by the end effect of a high thrust tubular PMLSM using a genetic algorithm and FEM
331
Reduction of detent force in flat permanent magnet linear synchronous machines by means of three different methods
332
Reduction of detent force in permanent magnet linear synchronous motor with double secondary side
333
Reduction of detuning effects using robust parameter design for implantable antennas
334
Reduction of development time by using scriptable IEC 61499 function blocks in a dynamically loadable type library
335
Reduction of dielectric loss of sputtered tantalum oxide films
336
Reduction of dielectric losses in substrate integrated waveguide
337
Reduction of difference among trained neural networks by re-learning
338
Reduction of differential-mode to common-mode conversion by means of analytic description in common-mode chokes used for an automotive communication bus system
339
Reduction of digital PWM limit ring with novel control algorithm
340
Reduction of dimensionality for perceptual clustering
341
Reduction of direct tunneling power dissipation during behavioral synthesis of nanometer CMOS circuits
342
Reduction of direct-tunneling gate leakage current in double-gate and ultra-thin body MOSFETs
343
Reduction of discontinuity due to the orbit boost in TRMM Precipitation Radar product for climate studies
344
Reduction of discrete cosine transform/ quantisation/inverse quantisation/inverse discrete cosine transform computational complexity in H.264 video encoding by using an efficient prediction algorithm
345
Reduction of discrete interval systems through fuzzy-C means clustering with dominant pole retention
346
Reduction of discrete-dopant-induced high-frequency characteristic fluctuations in nanoscale CMOS circuit
347
Reduction of discretization errors of dynamics with variable structure and its realization using FPGA
348
Reduction of disk flutter by decreasing disk-to-shroud spacing
349
Reduction of disk flutter by decreasing disk-to-shroud spacing
350
Reduction of dislocation densities in InP single crystals by the TB-LEC method
351
Reduction of dislocations in a SIMOX film by controlling the annealing sequence
352
Reduction of dispersion impairment of soliton systems through chirp control at amplifier location
353
Reduction of dispersion induced composite triple beat and second-order intermodulation in subcarrier multiplexed systems using fiber grating equalizers
354
Reduction of dispersion induced distortions by semiconductor optical amplifiers
355
Reduction of Dispersion Induced Distortions in Radio over Fibre links
356
Reduction of dispersion-induced distortion in SCM transmission systems by using predistortion-linearized MQW-EA modulators
357
Reduction of dispersion-induced intensity noise in subcarrier systems by using tapered linearly chirped gratings
358
Reduction of dispersive ground-roll using time delay spectrometry
359
Reduction of dispersive waves by chirping compensation in an optical soliton source with an electroabsorption modulator
360
Reduction of dissipation factor in power cable material systems containing metallocene- and post-metallocene-catalyzed polymers
361
Reduction of Distortion and Cross-Talk in Radio Receivers by Mean of Variable-Mu Tetrodes
362
Reduction of distortion in analogue modulated semiconductor lasers by feedforward compensation
363
Reduction of distortion in spiral CT by tilted fan beam data acquisition
364
Reduction of distortion in tunnel–diode amplifiers
365
Reduction of distortions in MRSI using a new signal model
366
Reduction of distribution feeders for simplified PV impact studies
367
Reduction of disturbance effects and sustained oscillation using multi-sensor fusion in a flexible link system
368
Reduction of DoA Estimation Errors Caused by Antenna Array Imperfections
369
Reduction of Doppler effects in OFDM systems
370
Reduction of Doppler estimation error by multi-frequency transmission
371
Reduction of Doppler-induced ICI by interference prediction
372
Reduction of Dot Crawl and Rainbow Artifacts in the NTSC Video
373
Reduction of Doubtful Detection of Human Lymphocyte Micro-Nucleus Based on Wiener´s Deconvolution and Computing Distributed Service
374
Reduction of downtime in remote controlled mechanical handling plant
375
Reduction of drift error of a network analyser in small antenna measurement
376
Reduction of dross formation during wave soldering using lead-free solders
377
Reduction of duplicate names in data entry forms
378
Reduction of duty cycle distortion through bandpass filtering
379
Reduction of dynamic false contour in plasma display panel by using additional chessboard pattern
380
Reduction of dynamic linewidth in single-frequency semiconductor lasers
381
Reduction of dynamic memory usage in concurrent fault simulation for synchronous sequential circuits
382
Reduction of dynamical systems when certain of the elements of the reduced-system matrices are specified
383
Reduction of earthquake risk in the United States: bridging the gap between research and practice
384
Reduction of ECG precordial leads
385
Reduction of Eclipsing Loss in High PRF Radars
386
Reduction of Eddy Current Losses by the Inverted Turn Transposition and the Twisted Lead Transposition
387
Reduction of eddy current losses in pipe-type cable systems
388
Reduction of Eddy Current Losses in Power Cable Systems Based on Phase Optimization
389
Reduction of eddy currents induced by resonant magnetic perturbation coils by inserting high permeability materials
390
Reduction of eddy-current losses by circumferential and radial PM segmentation in axial flux permanent magnet machines with fractional-slot concentrated winding
391
Reduction of Eddy-Current Losses in Fractional-Slot Concentrated-Winding Synchronous PM Motors
392
Reduction of Edge Busyness in Delta Modulation
393
Reduction of Edge Effect on Disk Electrodes by Optimized Current Waveform
394
Reduction of edge noise in thin film metal media using discrete tracks
395
Reduction of edge noise in this film metal media using discrete tracks
396
Reduction of edge reflections in the TLM model
397
Reduction of EEDF Measurement Distortion in Regularized Solutions of the Druyvesteyn Relation
398
Reduction of EEG artefacts induced by vibration in the MR-environment
399
Reduction of EEG artifacts by ICA in different sleep stages
400
Reduction of EEG artifacts in simultaneous EEG-fMRI: Reference layer adaptive filtering (RLAF)
401
Reduction of effect of coordination constraints in the linear optimization of operating times of overcurrent relays
402
Reduction of Effective Emittance by Stacking Beamlets in Phase Space
403
Reduction of effective linewidth enhancement factor alpha /sub eff/ of DFB lasers with complex coupling coefficients
404
Reduction of effects of inactive array elements in phase aberration correction [medical ultrasonics]
405
Reduction of effects of signal-dependent errors in current-mode analogue Viterbi decoders
406
Reduction of Efficiency Droop in InGaN Light-Emitting Diode Grown on Self-Separated Freestanding GaN Substrates
407
Reduction of efficiency droop in InGaN-based UV light-emitting diodes with InAlGaN barrier
408
Reduction of efficiency droop in Semipolar (1101) InGaN/GaN light emitting diodes grown on patterned silicon substrates
409
Reduction of electric energy consumption in induction motor drives by setting supply voltage
410
Reduction of electric vehicle power consumption through design optimization of front axle unitized bearing
411
Reduction of electrical baseband memory effect in high-power LDMOS devices using optimum termination for IMD3 and IMD5 using active load-pull
412
Reduction of Electrical Crosstalk in Hybrid Backside Illuminated CMOS Imagers using Deep Trench Isolation
413
Reduction of Electrical Energy Consumed by Feed-Drive Systems Using Sliding-Mode Control With a Nonlinear Sliding Surface
414
Reduction of Electrical Interaction in Auditory Prostheses
415
Reduction of electrical load for air conditioning by electronically controlled geothermal energy
416
Reduction of Electrical Noise in Computer and Control Installations in Steel Mills: I--IV
417
Reduction of electrical tree propagation in composite insulation using double barriering technique
418
Reduction of electric-field intensification and hot-spot formation inside cable terminations
419
Reduction of electrocardiogram interference from diaphragmatic electromyogram by nonlinear filtering
420
Reduction of electromagnetic field (EMF) of wireless power transfer system using quadruple coil for laptop applications
421
Reduction of electromagnetic field pollution in 3D space using a genetic algorithm
422
Reduction of electromagnetic force harmonics in asynchronous traction motor by adapting the rotor slot number
423
Reduction of electromagnetic force harmonics in asynchronous traction motor by changing rotor slot number
424
Reduction of electromagnetic interference by means of frequency selective devices
425
Reduction of electromagnetic interference caused by an image plane for a PCB
426
Reduction of electromagnetic interference in DC-DC converter using chaos
427
Reduction of Electromagnetic Interference Susceptibility in Small-Signal Analog Circuits Using Complementary Split-Ring Resonators
428
Reduction of electromagnetic noise in three-phase induction motors
429
Reduction of electromagnetic perturbations for cold plasma electrochemical reactors using electromagnetic screening
430
Reduction of Electromagnetic Radiation from Apertures and Enclosures Using Electromagnetic Bandgap Structures
431
Reduction of electromagnetic radiation from power and ground layers using capacitors
432
Reduction of electromagnetic radiation using conducting wires or multilamina shielding
433
Reduction of Electromigration-Induced Failure in Aluminum Metallization Through Anodization
434
Reduction of electromyographic noise in the signal-averaged electrocardiogram by spectral decomposition
435
Reduction of Electron Flow Current and Localized Anode Energy Deposition in Transitions from Coaxial Feeds to a Disk
436
Reduction of electron flow current and localized anode energy deposition in transitions from coaxial feeds to a disk
437
Reduction Of Electron Shading Damage With Pulse-modulated ECR Plasma
438
Reduction of electrooptical response times of a field-effect liquid-crystal device: Application to dynamic-driven real-time matrix display
439
Reduction of electrostatically adhered particles on wafer backside using ionizers
440
Reduction of EM radiation from electronic equipment at design stage
441
Reduction of EM wave reflections in a shielded room
442
Reduction of EMI by combining interleaving and modulation techniques in multiconverter topology
443
Reduction of EMI by electric field method
444
Reduction of EMI emission from power converter using soft-switching techniques
445
Reduction of EMI emission from power converters using soft-switching technique
446
Reduction of EMI emission of an on-board charger for electric vehicles
447
Reduction of EMI for oblique incidence of em waves — A case study
448
Reduction of EMI from SMPS (switched mode power supplies) by resonance technique and its utilities in industrial process control instruments
449
Reduction of EMI in AC Drives Through Dithering Within Limited Switching Frequency Range
450
Reduction of EMI in planar transformers by charge balancing
451
Reduction of EMI Susceptibility in CMOS Bandgap Reference Circuits
452
Reduction of EMI through switching frequency dithering
453
Reduction of EMI using anticontrol of chaos
454
Reduction of emitter thickness in AlGaAs/GaAs heterojunction bipolar transistor
455
Reduction of emitter-collector leakages by ion implantation
456
Reduction of encoder measurement errors in UKIRT telescope control system using a Kalman filter
457
Reduction of encoding delay in compression of binary sources using turbo codes: A two-stage algorithm
458
Reduction of end effector oscillations of a parallel mechanism with modified motion profiles
459
Reduction of Energy Consumption by Proper Speed Selection in PMSM-Driven Roller Conveyors
460
Reduction of Energy Consumption in Processors by Early Detection and Bypassing of Trivial Operations
461
Reduction of energy consumption of Video-on-Demand services using cache size optimization
462
Reduction of energy consumption using SPM and optimal code layout in embedded systems
463
Reduction of energy losses in electrical distribution systems
464
Reduction of Energy Storage Requirements in Future Smart Grid Using Electric Springs
465
Reduction of energy storage system for smoothing hybrid wind-PV power fluctuation
466
Reduction of energy sweep of the ETA-II beam
467
Reduction of engine torque ripple at starting with belt driven integrated starter generator
468
Reduction of Envelope Correlation on non-metallic and metallic chassis phones
469
Reduction of environmental qualification burden for mechanical equipment
470
Reduction of epitaxial alignment in n+-p poly-Si emitter diode due to gettering of P and As by Ar implantation
471
Reduction of equivalent series inductor effect in constant on- time control DC-DC converter without ESR compensation
472
Reduction of Equivalent Series Inductor Effect in Delay-Ripple Reshaped Constant On-Time Control for Buck Converter With Multilayer Ceramic Capacitors
473
Reduction of equivalent series inductor effect in delay-ripple reshaped constant on-time control for buck converter with multi-layer ceramic capacitors
474
Reduction of Error and Null Voltage in Synchro Control Systems
475
Reduction of error floor of differential PSK in mobile radio channels by adaptive sampling
476
Reduction of Error in Magnetic Knife Method to Measure J\\rm _ c Distribution of YBCO Coated Conductor
477
Reduction of error measurements for an accurate 3D motion assessment in biplane cineangiography
478
Reduction of error rate in Sybil attack detection for MANET
479
Reduction of errors due to random FM noise
480
Reduction of errors due to source and meter in the nonlinearity test
481
Reduction of errors in blind identification of FIR systems under order overestimation
482
Reduction of errors in vibratory gyroscopes by double modulation
483
Reduction of Eu3+ to Eu2+ in oxyfluoride alumino-borosilicate glasses and glass ceramics prepared in air
484
Reduction of Euler Lagrange problems for constrained variational problems and relation with optimal control problems
485
Reduction of excess intensity noise in spectrum-sliced incoherent light for WDM applications
486
Reduction of excess intensity noise induced by external reflection in a gain-coupled distributed feedback semiconductor laser
487
Reduction of exciting current of induction machine during connection to electrical grid
488
Reduction of exploratory data messages on directed diffusion in mobile wireless sensor networks
489
Reduction of Exposure Inhomogeneity for Millimeter-Wave Experiments on Cells In Vitro
490
Reduction of external vibration in hard disk drives using adaptive feed-forward control with single shock sensor
491
Reduction of extreme conditions of MAGO chamber operation by changing the shape of pulse of plasma magnetization current
492
Reduction of extrinsic base resistance in GaAs/AlGaAs heterojunction bipolar transistors and correlation with high-frequency performance
493
Reduction of extrinsic base-collector capacitance in InP/InGaAs SHBTs using a new base pad design
494
Reduction of f/sub t/ by nonuniform base bandgap narrowing
495
Reduction of Facet Reflectivity of Quantum-Cascade Lasers With Subwavelength Gratings
496
Reduction of fading in atmospheric optical communication links by application of optical reciprocity theory
497
Reduction of failure rates in automated analysis of difficult images: improved simultaneous detection of left and right coronary borders
498
Reduction of False Alarm Rate in Detecting Network Anomaly using Mahalanobis Distance and Similarity Measure
499
Reduction of False Alarm Rate in Distributed Multistatic Sonar Systems through Detection Cueing
500
Reduction of False Alarms in Intensive Care Unit using Multi-feature Fusion Method
501
Reduction of false blood pressure alarms by use of electrocardiogram blood pressure relationships
502
Reduction of false cardiac arrhythmia alarms through the use of machine learning techniques
503
Reduction of false critical ECG alarms using waveform features of arterial blood pressure and/or photoplethysmogram signals
504
Reduction of false positive detection in clustered microcalcifications
505
Reduction of False Positive Intrusions by using Neural Nets
506
Reduction of false positives in intrusion detection via adaptive alert classifier
507
Reduction of false positives in lung nodule detection using a two-level neural classification
508
Reduction of False Positives in Polyp Detection Using Weighted Support Vector Machines
509
Reduction of false sharing by using process affinity in page-based distributed shared memory multiprocessor systems
510
Reduction of far-end crosstalk on coupled microstrip PCB interconnects
511
Reduction of fast dU/dt impact for protection of distribution transformers
512
Reduction of fast SOP changes in DSCMs under influence of shock and vibrations
513
Reduction of fault detection costs through testable design of sequential architectures with signal feedbacks
514
Reduction of Fault Latency in Sequential Circuits by using Decomposition
515
Reduction of feed blockage in reflectarray by orthogonally polarized transformation
516
Reduction of feedback loops in sequential circuits and carry leads in iterative networks
517
Reduction of Feedback Overload by Exploiting Adaptive Channel in OFDMA systems
518
Reduction of feedback-induced intensity noise in vertical-cavity surface-emitting laser by superposition of high-frequency current
519
Reduction of FePt ordering temperature by Cu underlayer on Si
520
Reduction of FFT circuit area for OFDM demodulator based on skipping-point representation
521
Reduction of fiber alignment shift in add/drop filter module packaging
522
Reduction of fiber alignment shifts in high-speed laser module packaging
523
Reduction of fiber alignment shifts in semiconductor laser module packaging
524
Reduction of fiber chromatic dispersion effects in fiber-wireless and photonic time-stretching system using polymer modulators
525
Reduction of fiber four-wave mixing influence using frequency modulation in multichannel IM/DD transmission
526
Reduction of field intensity on lightning protected installations with Ex zones to avoid upward leaders
527
Reduction of field penetration through narrow slots by conducting strip
528
Reduction of filter sidelobe level by an X-crossing vertical coupled ARROW filter
529
Reduction of finite element models employing inclusion principle
530
Reduction of finite-gain effect in switched-capacitor filters
531
Reduction of fish´s learning speed by chaos and randomness in antagonistic relationship of robot and fish
532
Reduction of fitness calculations in Cartesian Genetic Programming
533
Reduction of fixed loss in buried-channel CCD´s operating at 77 K
534
Reduction of fixed-pattern noise of BASIS due to low kinetic energy reactive ion and native-oxide-free processing
535
Reduction of Fixed-Position Noise in Position-Sensitive Single-Photon Avalanche Diodes
536
Reduction of Flicker Noise in AlGaN/GaN-Based HFETs After High Electric-Field Stress
537
Reduction of flicker noise in transistor amplifiers
538
Reduction of floating substrate effect in thin-film SOI MOSFETs
539
Reduction of floating-point roundoff noise in recursive digital filters with error feedback
540
Reduction of flow induced suspension vibrations in a hard disk drive by dual-stage suspension control
541
Reduction of flow-induced suspension vibrations in a hard disk drive by dual-stage suspension control
542
Reduction of fluorine concentration in the submicron polycide process using dichlorosilane WSix
543
Reduction of flying height modulation of hybrid active slider — A nonlinear control approach
544
Reduction of FM noise in impatt oscillators by optical illumination
545
Reduction of FM Noise in Microwave Diode Oscillators by Cavity and Injection Stabilization
546
Reduction of FM threshold effect by inband noise cancelling
547
Reduction of force ripples in PM planar actuator
548
Reduction of Forced Error in Closed-Loop Systems
549
Reduction of Formaldehyde Emission of Wood-Based Panels
550
Reduction of Forward Scattering from Blocking Struts in Reflector Antennas
551
Reduction of forward scattering from cylindrical objects using hard surfaces
552
Reduction of Four Wave Mixing by employing circular polarizers in DWDM optical networks
553
Reduction of four-wave mixing crosstalk in WDM systems using unequally spaced channels
554
Reduction of four-wave mixing crosstalk using a novel hybrid WDM/TDM technique
555
Reduction of four-wave mixing induced penalty in unequally spaced WDM transmission system by using optical DPSK
556
Reduction of Four-Wave-Mixing Crosstalk in a Short Fiber-Optical Parametric Amplifier
557
Reduction of four-wave-mixing in FSK FDM lightwave transmission systems by asymmetric repeated unequally spaced frequency allocations
558
Reduction of FPGA resources for regular expression matching by relation similarity
559
Reduction of Frame Memory Accesses and Motion Estimation Computations in MPEG Video Encoder
560
Reduction of frequency chirping and dynamic linewidth in high-speed directly modulated semiconductor lasers by injection locking
561
Reduction of frequency deviations in quartz resonators by electric potentials of plate electrodes
562
Reduction of frequency fluctuation for wind farm connected power systems by an adaptive artificial neural network controlled energy capacitor system
563
Reduction of frequency oscillation of the gas-diesel generator units
564
Reduction of frequency shift error on periodical noise suppression system
565
Reduction of frequency-modulation noise from Gunn oscillators
566
Reduction of Fresnel Back-Reflection at Splice Interface Between Hollow Core PCF and Single-Mode Fiber
567
Reduction of Fresnel diffraction effects by soft apertures
568
Reduction of Fresnel diffraction effects by soft apertures
569
Reduction of fuel consumption in an industrial glass melting furnace
570
Reduction of Fuel Consumption in PV / Diesel Hybrid Power Generation System by Dynamic Programming Combined With Genetic Algorithm
571
Reduction of future information required for optimal control of dynamic systems: a pseudostochastic model
572
Reduction of fuzzy rule base via singular value decomposition
573
Reduction of fuzzy systems through open product analysis of genetic algorithm-generated fuzzy rule sets
574
Reduction of FWM and XGM for dynamic range improvement in SOA-based multiwavelength amplification using holding beam
575
Reduction of gain-saturation in merged beam lasers
576
Reduction of Gas Bubbles and Improved Critical Current Density in Bi-2212 Round Wire by Swaging
577
Reduction of gas discharge breakdown thresholds in the ionosphere due to multipacting
578
Reduction of gaseous contamination by UV/photoelectron method
579
Reduction of gate current in AlSb/InAs HEMTs using a dual-gate design
580
Reduction of Gate Leakage Current of Ultra thin Silicon Oxynitride via RTP-Induced Phonon-Energy-Coupling Enhancement
581
Reduction of gate-induced drain leakage current of polycrystalline silicon thin-film transistor by drain bias sweeping
582
Reduction of Gaussian, Supergaussian, and Impulsive Noise by Interpolation of the Binary Mask Residual
583
Reduction of Generalization Error in Fuzzy System Modeling
584
Reduction of generation of by-products by homogeneous barrier discharge type air fed ozoinzer
585
Reduction of genuine and imposter score overlapping based on intra-class variations and deviation of scores in a multimodal biometrie system
586
Reduction of geometric taper losses in the PCVD process
587
Reduction of ghost effect in exposure fusion by detecting the ghost pixels in saturated and non-saturated regions
588
Reduction of Ghost Signal By Use of Magnetic Absorbing Material on Walls
589
Reduction of glare in street lighting
590
Reduction of Gordon-Haus effect on dark solitons by means of nonlinear gain
591
Reduction of Gordon-Haus jitter by post-transmission dispersion compensation
592
Reduction of Gordon-Haus jitter in soliton transmission systems by optical phase conjugation
593
Reduction of Gordon-Haus timing jitter by periodic dispersion compensation in soliton transmission
594
Reduction of Gordon-Mollenauer phase noise by midlink spectral inversion
595
Reduction of grain size and ordering temperature in L10 FePt thin films
596
Reduction of grain size and ordering temperature in L10 FePt thin films
597
Reduction of grain size of Co/Pd multilayered media on Pd seeds with controlled morphology by electrochemical process
598
Reduction of Graphical Model and Genetic Algorithm for Computing Approximate Nash Equilibrium in Static Games
599
Reduction of grating lobes for slot antenna array at 60 GHz using multilayer spatial angular filter
600
Reduction of grating lobes in SAFT images
601
Reduction of grating lobes in sequentially rotated microstrip patch arrays
602
Reduction of Grating Peaks in Music Spectrum on Wideband Arrays
603
Reduction of gray level disturbances in plasma display panels
604
Reduction of green house gas emission by clean power trading
605
Reduction of grid current harmonic injection in cosinusoidal modulated matrix converter controlled induction generator for wind applications part-I
606
Reduction of grid current harmonic injection in cosinusoidal modulated matrix converter controlled induction generator for wind applications part-II
607
Reduction of grid current harmonic injection in matrix converter controlled induction generator for wind applications
608
Reduction of grid fault effect on operating of PM wind turbines equipped with matrix converter
609
Reduction of ground antenna near-in sidelobes in the direction of geostationary orbit
610
Reduction of Ground Bounce Noise in high speed printed circuit board
611
Reduction Of Ground Control Requirements For Spot Imagery By Pass Processing
612
Reduction of ground spillover in the Owens Valley 5.5-m telescope
613
Reduction of ground-plane-dependent effects on microstrip-fed printed rectangular monopoles
614
Reduction of growth rate in Bi-substituted bubble garnets using MoO3- and V2O5- added flux
615
Reduction of Growth Rate in Bi-Substituted Bubble Garnets Using MoO3-added Melt
616
Reduction of guard interval by impulse compression for DMT modulation on twisted pair cables
617
Reduction of Guided Acoustic Wave Brillouin Scattering in Photonic Crystal Fibers
618
Reduction of halftoning errors due to line load in a plasma display panel
619
Reduction of handoff search phase time in IEEE 802.11 WLAN to fulfill real time services requirements
620
Reduction of handover failure for small cells in heterogeneous networks
621
Reduction of Handover Latency Using MIH Services in MIPv6
622
Reduction of handsets’ SAR via the applications of R-card
623
Reduction of harmonic concentration and acoustic noises using variable selective harmonic elimination technique
624
Reduction of harmonic currents generated by discharge lamp systems
625
Reduction of harmonic currents in fluorescent lighting systems: design and realisation
626
Reduction Of Harmonic Distortion And Improvement Of Voltage Form Factor In Compensated Railway Systems by Means of a Single Arm Filter
627
Reduction of harmonic distortion and noise in a semiconductor optical amplifier using bias current feedback
628
Reduction of harmonic distortion in dual magnet type microspeaker
629
Reduction of harmonic distortions of VSI-fed induction motor with direct self-control
630
Reduction of harmonic iron losses in interior permanent magnet motors by optimization of rotor structures
631
Reduction of harmonic pollution in distribution networks
632
Reduction of harmonics and noise of microwave oscillators
633
Reduction of Harmonics from MW-class Wind Turbines by Interlaced Active Front-Ends
634
Reduction of harmonics in 3-phase, 3-wire system by the use of shunt active filter
635
Reduction of HARQ memory in low mobility LTE systems
636
Reduction of head effect in mobile devices
637
Reduction of heart sounds from lung sound recordings by automated gain control and adaptive filtering techniques
638
Reduction of Heart Sounds from Lung Sounds by Adaptive Filterng
639
Reduction of heater cathode leakage in reliable tubes
640
Reduction of heating effects in high-power fiber-lasers
641
Reduction of heatsink emissions by application of lossy materials
642
Reduction of heterogeneity longitudinal component of the electrical field in the output cavity of multibeam klystrons
643
Reduction of high degree characteristic polynomials to 2nd degree for infinite range of gain applying gain margins and phase margins curve
644
Reduction of high fidelity lithium-ion battery model via data-driven system identification
645
Reduction of high frequency electromagnetic field analysis to circuit analysis for modelling coupling between electronic components and PCBs
646
Reduction of high frequency leakage current from PWM inverter-motor system at the "integrated grounding system"
647
Reduction of high frequency zero sequence harmonics in parallel connected PV-inverters
648
Reduction of high PAPR effect with FEC enhanced deep data clipping ratio in an optical OFDM system
649
Reduction of high power microwave breakdown delay times using multiple passes through a TE111 resonator
650
Reduction of high surge voltage on coiled optical fibre submarine cable
651
Reduction of high-frequency conduction losses using a planar Litz structure
652
Reduction of high-frequency conduction losses using a planar litz structure
653
Reduction of high-frequency transient overvoltages in power stations with generator circuit-breakers
654
Reduction of high-level nonlinear smearing in c.c.d.s.
655
Reduction of high-order modes coupling on bends in the dielectric-coated single wire waveguide
656
Reduction of high-speed signal distortions in double-layered dielectric PCB interconnects
657
Reduction of hole transit time in GaAs MSM photodetectors by p-type /spl delta/-doping
658
Reduction of Horizontal Overscan Probability
659
Reduction of Hot Carrier Degradation of FinFETs Due to Short-Pulse Stress
660
Reduction of hot spots in hyperthermia by means of broadband energy transmission
661
Reduction of hot-carrier generation in 0.1-μm recessed channel nMOSFET with laterally graded channel doping profile
662
Reduction of hot-carrier-induced 1/f noise of MOS devices using deuterium processing
663
Reduction of hot-electron-generated substrate current in sub-100-nm channel length Si MOSFET´s
664
Reduction of human body effect on mobile handset antennas
665
Reduction of hump effect of thin-film transistor by SiNx Film
666
Reduction of hybrid silicon laser thermal impedance using poly Si thermal shunts
667
Reduction of hybrid silicon laser thermal impedance using Poly Si thermal shunts
668
Reduction of hydrogen induced losses in PECVD-SiOxNy optical waveguides in the near infrared
669
Reduction of hydrogen sulfide (H2S) from poultry based biogas by aeration technique
670
Reduction of hysteresis in mobility measurements of carbon nanotube transistors by pulsed I–V characterization
671
Reduction of hysteretic propagation delay with less performance degradation by novel body contact in PD SOI application
672
Reduction of I/O power using energy efficient HSTL I/O standard in vedic multiplier on FPGA
673
Reduction of ICI by using pulse shapes in OFDM systems
674
Reduction of ICI for Spectrum Pooling
675
Reduction of ICI in MIMO-OFDM system using self-cancellation with space frequency block code
676
Reduction of ICI in OFDM using window functions
677
Reduction of image blurring for time-correlation magnetic particle imaging
678
Reduction of image coding artifacts using spatial structure analysis
679
Reduction of Image Retention in Image Orthicon Cameras
680
Reduction of Image Shortening in Two-Dimensional Pattern Replication using X-Ray Lithography
681
Reduction of Impact Ionization in GaAs-Based Planar Gunn Diodes by Anode Contact Design
682
Reduction of impedance and feedthrough parasitics of RF micromechanical resonators
683
Reduction of implicit hamiltonian systems with symmetry
684
Reduction of Impulse Interference in Voice Channels
685
Reduction of impulse noise from highly corrupted digital images by using neural networks
686
Reduction of impulse noise in MRI images using block-based adaptive median filter
687
Reduction of impurities in fluoride glass fibers
688
Reduction of In-Band Intermodulation Distortion Products in Radio Frequency Power Amplifiers with Digital Predistortion Linearization
689
Reduction of in-band intermodulation products caused by adjacent channel signals via the design of linear out-of-band behavior
690
Reduction of inconsistent decision systems
691
Reduction of inductance and current rating of the coil and enhancement of fault current limiting capability of a rectifier type superconducting fault current limiter
692
Reduction of inductive common-mode coupling of printed circuit boards by nearby U-shaped metal cabinet panel
693
Reduction of Inductive Crosstalk Using Quadrupole Inductors
694
Reduction of inelastic scattering effect by introducing strain-compensated superlattice into GaInAs/GaInP multi-quantum barriers
695
Reduction of influence of decrease in SNR of ultrasonic pulse during cardiac cycle in measurement of small change in thickness of arterial wall
696
Reduction of influence of inter-core cross-talk in MCF with bidirectional assignment between neighboring cores
697
Reduction of influence of variation in center frequencies of RF echoes on estimation of artery-wall strain
698
Reduction of inherent ambiguities in structure from motion problem using inertial data
699
Reduction of initial stress stiffening by topology optimization
700
Reduction of injection voltage in signal injection sensorless drives using capacitor-integrated inverter
701
Reduction of In-Plane Uniaxial Magnetic Anisotropy in Patterned Single-Crystal Fe Dot Arrays
702
Reduction of input vectors by using of attribute selection in rule extraction method from trained neural networks
703
Reduction Of Inrush Current In Single-phase Transformer Using Virtual Air Gap Technique
704
Reduction of inrush current in single-phase transformer using virtual air gap technique
705
Reduction of inrush-current surges in transformers
706
Reduction of insertion loss in millimeter-wave tunable filter over 100 GHz
707
Reduction of insertion loss of thin film filters embedded in PLC platforms
708
Reduction of insulation thickness and AC loss in a superconducting cable under lightning-surge-free circumstances
709
Reduction of Interband Correlation for Landsat Image Compression
710
Reduction of Intercarrier Interference Based on Window Shaping in OFDM RoF Systems
711
Reduction of inter-cell interference using vertical beamforming scheme for fractional frequency reuse technique
712
Reduction of inter-channel and inter-symbol interferences in communication channels with frequency-separated users
713
Reduction of inter-channel crosstalk using Mach-Zehnder type filter in digital/RF optical transmission link
714
Reduction of interchannel interference noise in a two-channel grating-based OCDMA system using a nonlinear optical loop mirror
715
Reduction of interconnect delay by exploiting cross-talk
716
Reduction of Interconnect Loading in Sub-100nm Technology by 3D Stacked-FinCMOS
717
Reduction of interconnection weights in higher order associative memory networks
718
Reduction of interconnections in quadratic associative memory using pair significance
719
Reduction of interface state density in MNOS capacitors by Hydrogen implantation
720
Reduction of interface traps in p-channel MOS transistors during channel-hot-hole stress
721
Reduction of Interference Between pH and Optical Output Signals in a Multimodal Bio-Image Sensor
722
Reduction of interference between pH and optical output signals in a multimodal bio-image sensor
723
Reduction of interference by high power HF radar transmitters
724
Reduction of Interference for CDMA-Based Fingerprinting Scheme Based on Random Permutation
725
Reduction of interference from DGPS transmissions in the MF band using a GMSK modulation scheme
726
Reduction of interference from large reflecting surfaces
727
Reduction of Interference from Radio-Frequency Heating Equipment
728
Reduction of interference in automotive radars using multiscale wavelet transform
729
Reduction of Interference in Broadcast Reception
730
Reduction of Interference in FM Receiver by Feedback Across the Limiter
731
Reduction of interference in knee sound signals by adaptive filtering
732
Reduction of interference in microwave automotive radars
733
Reduction of interference in oscillometric arterial blood pressure measurement using fuzzy logic
734
Reduction of interference on substation low voltage wiring
735
Reduction of interference with linear equalizer using quarter subcarrier mapping scheme
736
Reduction Of Interfering Signals In Swept-frequency Radar Measurements Using Complex Wiener Filtering
737
Reduction of interferometric crosstalk induced penalty using a saturated semiconductor optical amplifier
738
Reduction of interferometric optical crosstalk penalty via DC blocking
739
Reduction of Inter-MAP Ping-pong Handoff Rate Based on 2-Layers in Hierarchical Mobile IPv6 Networks
740
Reduction of intermodulation distortion in active phased array antenna systems using a distortion controller
741
Reduction of intermodulation distortion in directly modulated lasers by RF predistortion
742
Reduction Of Intermodulation Distortion In Interferometric Optical Modulators
743
Reduction of intermodulation distortion in microwave active bandpass filters-theory and experiments
744
Reduction of intermodulation distortion of interferometric optical modulators through incoherent mixing of optical waves
745
Reduction of intermodulation distortion with harmonic injection for wideband traveling-wave tubes
746
Reduction of Intermodulation Effects in Power Amplifiers through Segmented Predistortion
747
Reduction of intermodulation products of superior order generated by Nonlinear systems over OFDM signals using a pre-distortion technique
748
Reduction of internal current measurements within the failure bounds analogue diagnosis scheme
749
Reduction of interpolants for logic synthesis
750
Reduction of Intersubcarrier Interference and Frequency-Selective Fading in OFDM-ROF Systems
751
Reduction of intersymbol interference in dispersion-managed soliton systems compensated by chirped fiber gratings
752
Reduction of intersymbolic interference using the eigenanalysis method and linear antenna array
753
Reduction of intracell and intercell interference for array MC-DS-CDMA
754
Reduction of intra-channel four-wave mixing using subcarrier multiplexing
755
Reduction of intrachannel four-wave mixing using subchannel multiplexing
756
Reduction of intrachannel four-wave mixing using the alternate-phase RZ modulation format
757
Reduction of intrachannel nonlinear distortion in 40-Gb/s-based WDM transmission over standard fiber
758
Reduction of intrachannel nonlinearity using optical phase conjugation
759
Reduction of intrinsic 1/f device noise in a CMOS ring oscillator
760
Reduction of invasive tests in Chagasic patients with a modified self-organizing map
761
Reduction of Inventions to Practice
762
Reduction of Ion Energies From a Multicomponent Z-Pinch Plasma
763
Reduction of ionosphere divergence error in GPS code measurement smoothing by use of a non-linear process
764
Reduction of IP flow information in network traffic monitoring systems
765
Reduction of IPs energy consumption with ultra-low voltage supply
766
Reduction of IPTV channel zapping time by utilizing the key input latency
767
Reduction of iron loss in thin grain-oriented silicon steel sheets
768
Reduction Of Iron Loss In Thin Grain-oriented Stltcon Steel Sheets
769
Reduction of Irregular Magnetic Field Generated by Screening Current in REBCO Coil
770
Reduction of irrelevant and redundant data from TFRs for EEG signal classification
771
Reduction of ISI using different equalization of adaptive algorithm for mobile WiMAX communication system
772
Reduction of Kelvin Ratio Arm Errors in an AC Double Bridge Using Electronic Control
773
Reduction of kinetic mechanisms in reactive flow models for dynamic optimization
774
Reduction of kink effect in short-channel MOS transistors
775
Reduction of kink effect in thin-film SOI MOSFETs
776
Reduction of Knowledge Representation Using Logic Minimization Techniques
777
Reduction of l2-sensitivity for three-dimensional separable-denominator digital filters
778
Reduction of large scale linear dynamic SISO and MIMO systems using differential evolution optimization algorithm
779
Reduction of large shareholders scale, propensity to pay cash dividends and firm performance ??? An empirical research based on listed companies of GEM
780
Reduction of large-scale systems via generalized Gramians
781
Reduction of laser chirp in 1.5 μm DFB lasers by modulation pulse shaping
782
Reduction of laser modulation bandwidth requirement in FSK systems using duobinary coding and differential detection
783
Reduction of laser phase-noise to amplitude-noise conversion in the gas-cell atomic clock
784
Reduction of Laser Pulse Diffraction by Magnetized Electron–Positron Plasma Lens
785
Reduction of lasing threshold current density by the lowering of valence band effective mass
786
Reduction of lasing thresholds in circular photonic molecule microdisk lasers
787
Reduction of late time instabilities of the finite difference time domain method in curvilinear coordinates
788
Reduction of late time instabilities of the finite-difference time-domain method in curvilinear co-ordinates
789
Reduction of late time instabilities of the local-distorted nonorthogonal finite difference time domain method
790
Reduction of latency in mobile multi-hop relay(MMR) networks
791
Reduction of lateral and longitudinal oscillations of vehicle’s platooning by means of decentralized overlapping control
792
Reduction of lateral diffusion of photoelectrons in silicon photodiode imager arrays by internal gettering
793
Reduction of lateral parasitic current flow by buried recombination layers formed by high energy implantation of C or O into silicon
794
Reduction of lateral phosphorus diffusion in CMOS n-wells
795
Reduction of lattice relaxation in thick strained InAs layer during growth interruption
796
Reduction of layout variations with stress-compensated hybrid STI fills: a comprehensive analysis
797
Reduction of lead free solder aging effects using doped SAC alloys
798
Reduction of Leakage and Low-Frequency Noise in MOS Transistors Through Two-Step RTA of NiSi-Silicide Technology
799
Reduction of leakage current and power in full subtractor using MTCMOS technique
800
Reduction of leakage current at the gate edge of SDB SOI NMOS transistor
801
Reduction of leakage current in chemical-vapor-deposited Ta2 O5 thin films by furnace N2O annealing
802
Reduction of leakage current in metal-induced lateral crystallization polysilicon TFTs with dual-gate and multiple nanowire channels
803
Reduction of leakage current of 4H-SIC pin diodes after UV light exposure
804
Reduction of leakage current of crystallized Ta2O5 through substitution with TiO2
805
Reduction of leakage current of large-area high-resistivity silicon p-i-n photodiodes for detection at 1.06 µm
806
Reduction of leakage currents in organic photovolatics with WOx dopping in PEDOT:PSS
807
Reduction of leakage currents in silicon mesa devices
808
Reduction of leakage energy in low level caches
809
Reduction of Leakage Power &amp; Noise for DRAM Design Using Sleep Transistor Technique
810
Reduction of leakage-power in CNTFET SRAM cell using stacked sleep technique at 32nm technology
811
Reduction of Lift-Off Effects in Pulsed Eddy Current for Defect Classification
812
Reduction of light induced degradation (LID) in B-doped Cz-Si solar cells by SiH4-free SiCxNy film
813
Reduction of light leakage in protruded electrode by refractive index matching between protrusion and blue phase liquid crystal
814
Reduction of Light Signal Pulse Distortion in Cascaded SFG–DFG Wavelength Conversion: Segmented QPM Interleaved by Short Wavelength Cut Filters
815
Reduction of light source noise from optical intrinsic signals of mouse neocortex by using independent component analysis
816
Reduction of Lightning-Induced Magnetic Fields and Voltages Inside Struck Double-Layer Grid-Like Shields
817
Reduction of linear continuous-time multivariable systems by matching first- and second-order information
818
Reduction of Linear Crosstalk Over Waveguide-Grating-Based Optical CDMA Coders/Decoders
819
Reduction of Linear Subdomains for Non-Linear Electro-Quasistatic Field Simulations
820
Reduction of linear systems by canonical forms
821
Reduction of linearized power systems for the study of interarea oscillations
822
Reduction of line-current total harmonic distortion (THD) of a Valley Fill electronic ballast
823
Reduction of linewidth enhancement factor in InGaAsP/InP modulation-doped strained multiple-quantum-well lasers
824
Reduction of linewidth enhancement factor in InGaAsP-InP modulation-doped strained multiple-quantum-well lasers
825
Reduction of linewidth enhancement factor in strained 1.55-μm lnGaAsP lasers
826
Reduction of load ability with TCSC and contribution analysis between generator to load using tracing method
827
Reduction of load model based on perturbation method
828
Reduction of loading effect by tungsten etchback in a magnetically enhanced reactive ion etcher
829
Reduction of local eddy-current losses in turbogenerator stator windings using composite subconductors
830
Reduction of location update traffic using virtual layer in PCS
831
Reduction of logical models of regulatory networks yields insight into dynamical properties
832
Reduction of Long Line Effects in Single-Layer Slotted Waveguide Arrays With an Embedded Partially Corporate Feed
833
Reduction of longitudinal distortion in ultrasonic holograms
834
Reduction of Long-Term Transient Radiation Response in Ion Implanted GaAs FETs
835
Reduction of look up latency in location-aware clusters of large-scale P2P overlay networks
836
Reduction of loop delay for digital symbol timing recovery systems using asynchronous equalization
837
Reduction of Loss and Local Overheating in the Tank of a Current Transformer
838
Reduction of loss due to OH in optical fibres by a two-step OH ¿ OD exchange process
839
Reduction of losses and improvement in voltage profile for a 2.8 MVA distribution network with Dispersed Generation
840
Reduction of losses at low frequencies and large amplitudes in NbTi ribbons
841
Reduction of Losses in Gain-Guided Laser Arrays Compared with Single Stripe Lasers
842
Reduction of Losses in Linacs for Protons or Heavy Ions
843
Reduction of losses in low-frequency (2 MHz) surface-wave delay line by outgassing
844
Reduction of loudspeaker polar response aberrations through the application of psychoacoustic error concealment
845
Reduction of low frequency excess noise and temperature drift of SQUIDs by "degaussing" using high frequency magnetic fields
846
Reduction of low gray-level contours using error diffusion based on emission characteristics of PDP
847
Reduction of Low Space Harmonics for the Fractional Slot Concentrated Windings Using a Novel Stator Design
848
Reduction of low-frequency current ripples in fuel cell power conditioning systems using proportional-resonant control
849
Reduction of low-frequency harmonics in modular multilevel converters (MMCs) by harmonic function analysis
850
Reduction of low-frequency noise in a DC-2.5 GHz GaAs amplifier
851
Reduction of low-frequency noise in click-evoked otoacoustic emissions. An optimal filtering approach
852
Reduction of low-frequency noise in feedback integrators
853
Reduction of low-frequency noise in MOSFETs under switched gate and substrate bias
854
Reduction of Low-Frequency Noise in Npn Aigaas/gaas HBTs
855
Reduction of low-frequency noise in n-p-n AlGaAs/GaAs HBT´s
856
Reduction of low-frequency noise in Si MOSFETs by using nanowire channel
857
Reduction of Low-Frequency Noise in Tunneling-Magnetoresistance Sensors With a Modulated Magnetic Shielding
858
Reduction of low-order-even-harmonics in grid connected inverters for renewable energy systems using delta-sigma based A/D conversion
859
Reduction of low-resolution incremental encoder usage effects on control performance by using a fuzzy controller
860
Reduction of Low-Temperature Nonlinearities in Pseudomorphic AlGaAs/InGaAs HEMTs Due to Si-Related DX Centers
861
Reduction of Luminance Errors Due to Line Load in a PDP With Limited Display Levels
862
Reduction of machining motion error of an aspheric surface coordinate measuring machine by a new error compensation method
863
Reduction of magnet eddy current loss in interior permanent magnet motors with concentrated windings
864
Reduction of Magnet Eddy-Current Loss in Interior Permanent-Magnet Motors With Concentrated Windings
865
Reduction of magnetic emission by increasing secondary side capacitor for ferrite geometry based series-series topology for wireless power transfer to vehicles
866
Reduction of magnetic field in superconducting maglev
867
Reduction of magnetic field in vehicle of superconducting maglev train
868
Reduction of magnetic field strength on PCB level laboratory for power electronics students
869
Reduction of magnetic fields from electric power and installation lines
870
Reduction of Magnetic Flux Leakage from an Induction Heating Range
871
Reduction of magnetic saturation by using additional permanent magnets in synchronous machines
872
Reduction of Magnetically Induced Vibration of a Spoke-Type IPM Motor Using Magnetomechanical Coupled Analysis and Optimization
873
Reduction of magnetic-field fluctuations by an inductive feedback system
874
Reduction of magnetite in air by use of microwave heating
875
Reduction of Magnetization in Windings Composed of HTS Tapes
876
Reduction of magnetizing inrush current in a delta connected transformer
877
Reduction of magnetizing inrush current in traction transformer
878
Reduction of Magnetoresistance by Hot Electrons in Magnetic Tunnel Junctions*
879
Reduction of MAI and Beat Noise in OCDMA Systems Using an SA-SOA-TPA-Based Receiver
880
Reduction of MAI Using Optical Normaliser in an Optical CDMA System
881
Reduction of major and minor hysteresis loops in a piezoelectric actuator
882
Reduction of malicious behavior patterns based on attribute order
883
Reduction of Market Power and Stabilisation of Outcomes in a Novel and Simplified Two-Settlement Electricity Market
884
Reduction of Markov Extended Features in JPEG Image Steganalysis
885
Reduction of material handling in the packing area of IR Steelcraft
886
Reduction of mathematical models of signal transduction networks: simulation-based approach applied to EGF receptor signalling
887
Reduction of matrix products and their error bounds
888
Reduction of measurement error in microwave reflectometers by minimum sensitivity calibration
889
Reduction of Measurement Error of Optical Vector Network Analyzer Based on DPMZM
890
Reduction of measurement errors influence on the results of subsurface radiolocation probing
891
Reduction of measuring time to acquire 3-D image of moving objects utilizing laser diode range-finding speedometer
892
Reduction of mechanical losses by use of ZFRP bobbins in AC superconducting coils
893
Reduction of Mechanical Losses Due to Frictional Heat in Bi-2223 Tapes Using Structural Materials of Various Thermal Expansion Properties
894
Reduction of mechanical vibration of an induction motor with pulsating torque load by feedforward control utilizing an acceleration sensor and a timing sensor
895
REduction of media noise in thin film metal by lamination
896
Reduction of media noise in thin film metal media by lamination
897
Reduction of medium noise of Co-Pd multilayered perpendicular magnetic recording media by a thin carbon interlayer
898
Reduction of memory accesses in motion estimation by block-data reuse
899
Reduction of memory footprint and computation time for embedded Support Vector Machine (SVM) by kernel expansion and consolidation
900
Reduction of Message Misdirection in Description Based Clustered Ad Hoc Networks
901
Reduction of Messages Unnecessarily Ordered in Scalable Group Communication
902
Reduction of Metal Artifact in Three-Dimensional Computed Tomography (3D CT) with Dental Impression Materials
903
Reduction of metal streak artifacts in X-ray computed tomography using a transmission maximum a posteriori algorithm
904
Reduction of metal streak artifacts in X-ray computed tomography using a transmission maximum a posteriori algorithm
905
Reduction of Metallic Grating Impedance and Velocity Perturbations Via Buried Bimetallic Electrode Geometries
906
Reduction of metallic interference in MEG signals using AMUSE
907
Reduction of metal-semiconductor contact resistance by embedded nanocrystals
908
Reduction of microbial growth in milk by pulsed electric fields
909
Reduction of micro-defects in the inter-metal dielectrics (IMD) chemical mechanical polishing (CMP) for ULSI applications
910
Reduction of micrometer size Al particles in nanosize AlN powder synthesized by pulsed wire discharge
911
Reduction of micromovement in optoelectronic packaging
912
Reduction of microphonic noise by digital waveform processing
913
Reduction of micro-scratch using slurry filter in oxide CMP (chemical mechanical polishing) for multi-level interconnections
914
Reduction of micro-SPECT streak artifacts from imperfect system modeling
915
Reduction of microwave attenuation in superconducting microstripline using plasma nitridation
916
Reduction of microwave loss by use of laminated electrodes
917
Reduction of MIMO-FIR taps via SOP-estimation in stokes space for 100 Gbps short reach applications
918
Reduction of minimum operating voltage (VDDmin) of CMOS logic circuits with post-fabrication automatically selective charge injection
919
Reduction of minimum word-boundary gap lengths in isolated word recognition
920
Reduction of minority carrier recombination at silicon surfaces and contacts using organic heterojunctions
921
Reduction of minterms in two-level discrete function implementation using exclusive-OR transform of inputs
922
Reduction of mixed cochannel interference in microcellular shared time-division duplexing (STDD) systems
923
Reduction of mixed co-channel interference in microcellular STDD systems
924
Reduction of Mixer Intermodulation by Neutral RF Biasing
925
Reduction of ML decoding complexity for MIMO Sphere Decoding, QOSTBC, and OSTBC
926
Reduction of modal noise in high-speed short-distance computer data links by an electrical signal
927
Reduction of mode coupling effects in double layer dipole slot dichroics
928
Reduction of mode partition noise by using semiconductor optical amplifiers
929
Reduction of mode partition noise by using semiconductor optical amplifiers
930
Reduction of mode partition noise in a multiwavelength semiconductor laser through hybrid modelocking
931
Reduction of mode selectivity in DFB lasers with one cleaved facet by a tapered refractive-index profile
932
Reduction of model dimension in nonlinear finite element approximations of electromagnetic systems
933
Reduction of model sets with inclusion
934
Reduction of molybdenum resistivity by a seed layer of Ti-W
935
Reduction of molybdenum resistivity by a seed layer of Ti-W
936
Reduction of MoM matrix dimension by transmission line and circuit theory
937
Reduction of momentum and spin relaxation rate in strained thin silicon films
938
Reduction of monostatic and bistatic radar cross section of antenna arrays
939
Reduction of motion artifact of photoplethysmogram signal based on its frequency distribution
940
Reduction of motion artifacts from photoplethysmographic recordings using a wavelet denoising approach
941
Reduction of motion artifacts in computed tomography
942
Reduction of motion artifacts using a two-frequency impedance plethysmograph and adaptive filtering
943
Reduction of motor overvoltage fed by PWM AC drives using a universal model
944
Reduction of motor speed fluctuation using repetitive control
945
Reduction of Multimode Interference in 300-nm Broadband Cr-Doped Fibers
946
Reduction of Multipacting in an Accelerator Cavity
947
Reduction of multipactor in RF ceramic windows using a simple titanium-vapor deposition system
948
Reduction of multi-path effect based on correlation decomposition in a DOA estimation system
949
Reduction of multipath effects for FSK with frequency-discriminator detection
950
Reduction of multi-path effects in a low frequency spherical near-field test facility
951
Reduction of Multipath Errors in Spread-Spectrum Code Tracking
952
Reduction of multipath interference in antenna pattern using matrix pencil method
953
Reduction of multipath propagation effects in microwave digital radio communications systems
954
Reduction of multipath-induced bias of GPS time-of-arrival
955
Reduction of Multiple Access Interference in a DS-OCDMA System via Two-Photon Absorption
956
Reduction of Multiple Access Interference in OCDMA Systems Using a Semiconductor Based TPA Device
957
Reduction of multiple harmonics EM noise in helicopter cockpit
958
Reduction of multiplicative noise in SAR imaging by Wiener filtering
959
Reduction of multivariable systems
960
Reduction of muscle activity during repeated reach and retrieval with gravity compensation in stroke patients
961
Reduction of mush-area distortion in common-frequency m.f. transmitter networks
962
Reduction of musical noise generated by spectral subtraction by combining wavelet packet transform and wiener filtering
963
Reduction of Musical Noise in Spectral Subtracted Speech Using Excitation Source Information
964
Reduction of musical noise in spectral subtraction method using subframe phase randomisation
965
Reduction of Musical Residual Noise Using Hybrid Median Filter
966
Reduction of mutual coupling between active monopoles: Application to superdirective receiving arrays
967
Reduction of Mutual Coupling Between Closely Packed Patch Antennas Using Waveguided Metamaterials
968
Reduction of mutual coupling between closely spaced PIFAs
969
Reduction of Mutual Coupling Between Closely-Packed Antenna Elements
970
Reduction of mutual coupling between closely-packed antenna elements using defected ground structure
971
Reduction of mutual coupling between closely-packed antenna elements using defected ground structure
972
Reduction of mutual coupling between closely-packed antenna elements with split ring resonator (SRR)
973
Reduction of mutual coupling between compact MIMO antennas arrays
974
Reduction of mutual coupling between dual-element antennas with new PBG techniques
975
Reduction of mutual coupling between millimeter-wave cylindrical DRA using a soft surface for mimo applications
976
Reduction of Mutual Coupling Between Neighboring Strip Dipole Antennas Using Confocal Elliptical Metasurface Cloaks
977
Reduction of mutual coupling between the elements of active phase array using compensation method and control adaptation
978
Reduction of mutual coupling between two dielectric resonator antennas mounted on a circular cylindrical ground plane
979
Reduction of mutual coupling by near-field coupled resonators
980
Reduction of mutual coupling for compact 60-GHz cavity-backed antennas in LTCC
981
Reduction of mutual coupling in a two element patch antenna array using sub-wavelength resonators
982
Reduction of mutual coupling in a waveguide array
983
Reduction of mutual coupling in active antenna arrays by optimized interfacing between antennas and amplifiers
984
Reduction of Mutual Coupling in Planar Multiple Antenna by Using 1-D EBG and SRR Structures
985
Reduction of mutual coupling using perfectly conducting fences
986
Reduction of myocardial oxygen demand by controlling heart rate and hemodynamics simultaneously by novel circulatory model
987
Reduction of NBTI-Induced Degradation on Ring Oscillators in FPGA
988
Reduction of Ne´el coupling in magnetic tunnel junctions containing an artificial ferrimagnet in the free layer
989
Reduction of near-field grating lobes in sparse linear phased arrays
990
Reduction of necessary precision for the learning of pattern recognition
991
Reduction of Negative Bias and Light Instability of a-IGZO TFTs by Dual-Gate Driving
992
Reduction of negative differential conductivity effect of AlGaN/GaN HEMTs using gate scaling
993
Reduction of network sensitivity through the use of high-order approximating functions
994
Reduction of neural network models for identification and control of nonlinear systems
995
Reduction of neutral base recombination in narrow band-gap SiGeC base heterojunction bipolar transistors
996
Reduction of Neutral Current in Airport Lighting System
997
Reduction of nickel ions in mordenites with different SiO2/Al2O3 molar ratios
998
Reduction of NIRS near-surface sensitivity using two detectors
999
Reduction of Nitrate in Groundwater with Modified Iron Nanoparticles
1000
Reduction of Nitrate in Water by Nanoscale Zero-Valent Iron Particles and Zeolite
بازگشت