بر اساس عنوان

1
Modeling of nonideal return paths on multilayer package
2
Modeling of non-ideal switch-capacitor integrator and its effect on baseband sigma-delta modulator stability and output dynamic range
3
Modeling of nonideal volume Bragg reflection gratings in photosensitive glass using a perturbed transmission matrix approach
4
Modeling of nonidealities in receiver front-end for a simulation of multistatic SAR system
5
Modeling of noninvasive microwave characterization of breast tumors
6
Modeling of Nonlaminated Electromagnetic Suspension Systems
7
Modeling of nonlinear absorption and refraction in quantum-well structures for all optical switching
8
Modeling of nonlinear active and passive devices in three-dimensional TLM networks
9
Modeling of nonlinear active regions in TLM (distributed circuits)
10
Modeling of nonlinear active regions with the FDTD method
11
Modeling of Non-Linear Analysis of Dynamic Characteristics of Linear Compressor
12
Modeling of nonlinear biological phenomena modeled by S-systems using Bayesian method
13
Modeling of Nonlinear Block-Oriented Systems Using Orthonormal Basis and Radial Basis Functions
14
Modeling of nonlinear colored noise in stable distribution environments
15
Modeling of nonlinear components for harmonic studies
16
Modeling of non-linear crosstalk in optical fiber
17
Modeling of Nonlinear Deformation Considering Temperature and Hydrostatic Pressure Using Genetic-Neural Networks
18
Modeling of nonlinear dispersive active elements, in TLM
19
Modeling of nonlinear dynamic system using nu-support vector machines
20
Modeling of Nonlinear Dynamic Systems
21
Modeling of nonlinear dynamic systems via discrete-time recurrent neural networks and variational training algorithm
22
Modeling of nonlinear dynamical systems based on deterministic learning and structural stability
23
Modeling of nonlinear dynamics at low frequencies in hard disk drive and its adaptive compensation
24
Modeling of nonlinear dynamics of active components in intelligent electric power systems
25
Modeling of nonlinear effects in HTS resonator
26
Modeling of nonlinear effects in HTSC filters
27
Modeling of Nonlinear Elements during Lightning Overvoltage Simulations
28
Modeling of nonlinear Fabry-Perot resonators by difference-differential equations
29
Modeling of nonlinear fish-scale metamaterial via coupled duffing oscillators
30
Modeling of nonlinear fuel utilization phenomena during engine start and crank-to-run transition
31
Modeling of nonlinear medical signal based on local support vector machine
32
Modeling of nonlinear nonstationary dynamic systems with a novel class of artificial neural networks
33
Modeling of nonlinear parameters on ship with fuzzy CMAC neural networks
34
Modeling of non-linear polysilicon resistors for analog circuit design
35
Modeling of Nonlinear Power Amplifier with Memory Effect for Wideband Application
36
Modeling of nonlinear power amplifier with memory effects applied for 3G system
37
Modeling of nonlinear responses for reciprocal transducers involving polarization switching
38
Modeling of nonlinear schemes in time domain, which contain transmission lines and networks with lumped parameters
39
Modeling of nonlinear seismic response of structures with active control
40
Modeling of Nonlinear Signal Distortion in Fiber-Optic Networks
41
Modeling of nonlinear system uncertainties using a linear fractional transformation approach
42
Modeling of Nonlinear Systems
43
Modeling of nonlinear systems based on orthogonal neural network with matrix value decomposition
44
Modeling of nonlinear systems for linear robust control theory: Identification via linear model sets under shifts of operating points
45
Modeling of nonlinear systems from input-output data
46
Modeling of nonlinear systems using relevance vector machines
47
Modeling of nonlinear vibrations for analysis and control of cylinder gyroscopes
48
Modeling of nonlinear wave velocity characteristics in a structural health monitoring system
49
Modeling of Nonlinear, Spatially-Dispersive Plasmas and Semiconductors Under Harmonic Excitation
50
Modeling of nonlinearities and their effects on digital beamforming
51
Modeling of nonlinearities in vibratory ring gyroscopes
52
Modeling of nonlinearity in semiconductor optical amplifiers
53
Modeling of non-line-of-sight ultraviolet scattering channels for communication
54
Modeling of non-lte atomic physics processes during the interaction of thin foils with short pulse lase
55
Modeling of non-redundant RCS system and hybrid control of high L/D gliding vehicle
56
Modeling of non-repaired items reliability in mechatronics systems
57
Modeling of Nonresonant Longitudinal and Inclined Slots for Resonance Tuning in ENZ Waveguide Structures
58
Modeling of Non-Salient PM Synchronous Machines under Stator Winding Inter-turn Fault Condition: Dynamic Model - FEM Model
59
Modeling of Nonstationary Heating of Semiconductor Structures Under HEMP Actions With Short Pulse Duration
60
Modeling of non-stationary process by modular separation of stability and plasticity
61
Modeling of Nonstationary Stochastic Process for Load Traffic Estimation
62
Modeling of nonuniform interconnects by using differential quadrature method
63
Modeling of nonuniform SiGe heterostructure
64
Modeling of non-uniformity losses in integrated large-area solar cell modules
65
Modeling of nonvolatile floating gate quantum dot memory
66
Modeling of nonvolatile gate-all-around charge-trapping SONOS memory cells
67
Modeling of normalized coprime factors with ν-metric uncertainty
68
Modeling of normalized coprime factors with H∞-norm bounded uncertainty
69
Modeling of normal-mode helical antennas at 900 MHz and 1.8 GHz for mobile communications handsets using the FDTD technique
70
Modeling of Novel Permanent Magnet Pole Shape SPM Motor for Reducing Torque Pulsation
71
Modeling of novel single flow zinc-nickel battery for energy storage system
72
Modeling of novel type diaphragm pump
73
Modeling of Novel Zigbee/IEEE802.15.4 MAC Protocol for SCADA Low Voltage Smart Grid Distribution Systems
74
Modeling of Novolak-based positive photoresist exposed to KrF excimer laser UV radiation at 248 nm
75
Modeling of NQS effects in carbon nanotube transistors
76
Modeling of NRD guide beam lead diode devices for millimeter-wave applications
77
Modeling of object oriented distributed software on a pipeline architecture
78
Modeling of Object Oriented OLAP
79
Modeling of Observability During In-Drilling Alignment for Horizontal Directional Drilling
80
Modeling of octagonal spiral inductors for integrated circuit applications
81
Modeling of OFDM-based systems with frequency offsets and frequency selective fading channels
82
Modeling of off-axis Gaussian beams in elliptical waveguides: application to mode-locking devices
83
Modeling of Oil and Water Migration Based on Chaos Genetic Algorithm Neural Network
84
Modeling of Oil and Water Migration Based on Support Vector Machine
85
Modeling of Oil Migration in Puget Sound
86
Modeling of On-Chip Bus Switching Current and Its Impact on Noise in Power Supply Grid
87
Modeling of On-Chip Differential Inductors and Transformers/Baluns
88
Modeling of on-chip global RLCG interconnect delay for step input
89
Modeling of on-chip inductor and transformer for RF integrated circuits
90
Modeling of On-Chip Spiral Inductors
91
Modeling of on-chip spiral inductors with a center-tap
92
Modeling of On-Chip Transmission Lines in High-Speed A&MS Design - The Low Frequency Inductance Calculation
93
Modeling of on-chip wireless power transmission system (invited paper)
94
Modeling of One-Campus-ID System Based on UML
95
Modeling of one-cycle controlled switching converters
96
Modeling of one-direction bendable articulated needle
97
Modeling of One-Way Transit Time in IP Routers
98
Modeling of on-state MOSFET operation and derivation of maximum channel field
99
Modeling of On-Wafer Interconnect System for CMOS RFICs
100
Modeling of op-amp nonlinearities in pipelined ADC
101
Modeling of open-loop stable linear systems using a combination of a finite fractional derivative and orthonormal basis functions
102
Modeling of operating parameters for wet ball mill by modified GA-KPLS
103
Modeling of Operation of Scanning Laser Acousto-Optic Microscope with a Sound Frequency Modulation
104
Modeling of Operational Amplifier based on VHDL-AMS
105
Modeling of operational distortion-rate characteristics for joint source-channel coding of video
106
Modeling of operative sequences of protections in power transmission systems using Petri Nets
107
Modeling of optical carrier recovery using four wave mixing technique for binary phase shift keying systems
108
Modeling of optical coupling to multimode polymer waveguides: axial and lateral misalignment tolerance
109
Modeling of optical gain in InGaN-AlGaN and InxGa1-xN-InyGa1-yN quantum-well lasers
110
Modeling of optical gain in quantum cascade laser subjected to strong magnetic field
111
Modeling of optical gain properties of multiple cations InGaAs-InAlAs quantum-well intermixing
112
Modeling of optical link using finite-difference method
113
Modeling of optical low coherence reflectometry recorded Bragg reflectograms: evidence to a decisive role of Bragg spectral selectivity
114
Modeling of optical multimode waveguides
115
Modeling of Optical Properties in Silicon Nanocrystals
116
Modeling of optical synchronization of chaotic external-cavity VCSELs
117
Modeling of Optical Transport in Wireless Networks
118
Modeling of optical waveguide modulators on III-V semiconductors
119
Modeling of optical waveguide poling and thermally stimulated discharge (TSD) charge and current densities for guest/host electro-optic polymers
120
Modeling of optical waveguide structures with general anisotropy in arbitrary orthogonal coordinate systems
121
Modeling of optically controlled dielectric resonators using conformal ADI-FDTD method
122
Modeling of optimal electricity supply problem in Iran´s power network by using hierarchical planning approach
123
Modeling of optimal screw jack design
124
Modeling of optimized field emission nanotriodes with aligned carbon nanotubes of variable heights
125
Modeling of optimum chiral carbon nanotube using DFT
126
Modeling of optoelectronic switch with PIN photodiode and GaAs MESFET transmission gate
127
Modeling of organic millimeterwave fishnet metamaterial structures
128
Modeling of ornithopter flight dynamics for state estimation and control
129
Modeling of orthogonality factor using ray-tracing predictions
130
Modeling of oscillatory activity of neuron assemblies of the visual cortex
131
Modeling of outdoor-to-indoor radio channels via propagation graphs
132
Modeling of out-of-step conditions in power systems
133
Modeling of Output Constraints in Multimedia Database Systems
134
Modeling of output power in a resonant microwave compressor with the transformation of the oscillations
135
Modeling of output resistance in SiGe heterojunction bipolar transistors with significant neutral base recombination
136
Modeling of output snapback characteristics in n-channel SOI MOSFETs
137
Modeling of overhead transmission lines with segmented shield wires for signal attenuation calculation in power line carrier systems
138
Modeling of oxidation-induced strain and its effect on the electronic properties of Si waveguides
139
Modeling of oxide breakdown from gate charging during resist ashing
140
Modeling of oxide-charge generation during hot-carrier degradation of PMOSFET´s
141
Modeling of oxide-confined vertical cavity surface emitting lasers
142
Modeling of oxide-confined vertical-cavity surface-emitting lasers
143
Modeling of OxRAM variability from low to high resistance state using a stochastic trap assisted tunneling-based resistor network
144
Modeling of oxygen-vacancy hole trap activation in 4H-SiC MOSFETs using density functional theory and rate equation analysis
145
Modeling of packet cellular networks with log-normal shadowing
146
Modeling of packet dropout for UAV wireless communications
147
Modeling of packet switching network with relative prioritization for different traffic types
148
Modeling of packet-loss-induced distortion in 3-D synthesized views
149
Modeling of packets loss in VoIP Networks and measurement of speech quality
150
Modeling of pair-induced quenching in erbium-doped silicate fibers
151
Modeling of parallel electric field tunnel FETs
152
Modeling of Parallel Interactive Modes among Collaborative Processes Based on High Level Petri Nets
153
Modeling of parallel systems filtration of discrete signals
154
Modeling of parameter variations and asymptotic LQG synthesis
155
Modeling of parameter variations and asymptotic LQG synthesis
156
Modeling of parameters of composite metal-polymer systems
157
Modeling of parametrically excited microelectromechanical oscillator dynamics with application to filtering
158
Modeling of parasitic capacitances in deep submicrometer conventional and high-K dielectric MOS transistors
159
Modeling of parasitic effects for flip-chip SAW filters
160
Modeling of Parasitic Fringing Capacitance in Multifin Trigate FinFETs
161
Modeling of Parasitic Inductive Couplings in a Pi-Shaped Common Mode EMI Filter
162
Modeling of parasitic inductive effects in power modules
163
Modeling of parasitic phenomena in trench technology
164
Modeling of Parrot Ardrone and passivity-based reset control
165
Modeling of partial discharge activity in spherical cavities within a dielectric material
166
Modeling of Partial Discharges from a Spherical Cavity within a Dielectric Material under Variable Frequency Electric Fields
167
Modeling of partial discharges in the presence of harmonics
168
Modeling of partially cracked and void hole defected through silicon via interconnections
169
Modeling of Partially Depleted SOI DEMOSFETs with a Sub-circuit Utilizing the HiSIM-HV Compact Model
170
Modeling of partially end-pumped Nd:YAG slab laser
171
Modeling of partial-RESET dynamics in Phase Change Memories
172
Modeling of particle arrangement in an isotropically conductive adhesive joint
173
Modeling of particle arrangement in an isotropically conductive adhesive joint
174
Modeling of Particle Interactions in DNA-laden Flows at the Microscale
175
Modeling of part-mating strategies for automating assembly operations for robots
176
Modeling of Passenger Evacuation Model in Transfer Hub Platform
177
Modeling of passive and nonlinear microwave structures using temporal iterative method
178
Modeling of Passive Coplanar Elements for W-band ICS, Experimental Verification Up to 110 GHz and Parasitic Mode Coupling Study
179
Modeling of passive elements and reliability
180
Modeling of passive elements with ASITIC
181
Modeling of passive elements with ASITIC
182
Modeling of passive gratings with nonlinear loads by volterra series
183
Modeling of passive millimeter-wave components based on LTCC technology
184
Modeling of passive-active device interactions
185
Modeling of passively Q-switched Er3+/Yb3+-codoped clad-pumped fiber lasers
186
Modeling of patch antennas partially loaded with dispersive backward-wave materials
187
Modeling of patch antennas using neural networks
188
Modeling of path loss for ultrawide band body-centric wireless communications
189
Modeling of patient data transmission scheme over MPI based cluster
190
Modeling of patient flows in a large-scale outpatient hospital ward by making use of electronic medical records
191
Modeling of Pattern-Based Block Motion Estimation and Its Application
192
Modeling of pattern-dependent on-chip interconnect geometry variation for deep-submicron process and design technology
193
Modeling of patterned contacts in tapered lasers
194
Modeling of peak-to-peak switching noise along a vertical chain of power distribution TSV pairs in a 3D stack of ICs interconnected through TSVs
195
Modeling of pedestrian behavior and its applications to spatial evaluation
196
Modeling of pedestrian dynamics on central refuge island of signalized two-stage midblock pedestrian crossing
197
Modeling of Pedestrian Evacuation Safety Control System Based on Agent
198
Modeling of penalties on chains of optical amplifiers with equalizing filters
199
Modeling of performance of mid-infrared gas sensors based on immersion lens diode optopairs
200
Modeling of performance of wireless communication antennas in the vicinity of the user
201
Modeling of performance-related design trade-offs in multi-chip assemblies
202
Modeling of perimeter-gated silicon avalanche diodes fabricated in a standard single-well CMOS process
203
Modeling of periodic and quasi-periodic structures by the MoM/BI-RME method
204
Modeling of periodic distributed MEMS-application to the design of variable true-time delay lines
205
Modeling of periodic location routing problem with time window and satisfaction dependent demands
206
Modeling of periodic nanostructures for enhanced second-harmonic generation
207
Modeling of periodic relative orbits using orbital element method
208
Modeling of periodic structures using the finite difference time domain (FDTD)
209
Modeling of periodically switched networks by mixed s-z description
210
Modeling of permanent magnet motor drives
211
Modeling of permanent magnet synchronous machine including torque ripple effects
212
Modeling of permanent magnet synchronous machine with fractional slot windings
213
Modeling of permanent-magnet linear synchronous motor using hybrid nonlinear autoregressive neural network
214
Modeling of Permanent-Magnet Synchronous Machine Including Torque Ripple Effects
215
Modeling of personal thinking and its application to studies of group thinking over the Internet
216
Modeling of Personalized Recommendation System Based on Ontology
217
Modeling of perturbed covariance sequences
218
Modeling of pervaporation process for the dehydration of bioethanol
219
Modeling of PEV charging load using queuing analysis and its impact on distribution system operation
220
Modeling of PFC rectifiers by PWA-fuzzy method
221
Modeling of PGA lines considering electromagnetic coupling based on high frequency measurements
222
Modeling of pH process using recurrent neural network and wavenet
223
Modeling of phenol decomposition induced by pulsed corona discharge in water
224
Modeling of phenomena in the grounding system including fields correlation
225
Modeling of phonics reading methodology using neural networks
226
Modeling of photoconductive switch using spectral domain approach
227
Modeling of photoconductive terahertz photomixers
228
Modeling of photodiode and measurements of device parameters
229
Modeling of photoinduced charge separation in germanosilicate optical fibers during UV-excited poling
230
Modeling of photoluminescence of graded band-gap Cu(In, Ga)Se2-Based solar cells
231
Modeling of Photonic Bandgaps in Resonant Waveguide Grating Systems Using a Simple Theory for 1-D Photonic Crystals
232
Modeling of photonic crystal fiber Raman amplifiers
233
Modeling of photonic crystal fibers
234
Modeling of photonic crystal optical fibers with finite elements
235
Modeling of photonic quantum ring lasers using torus knot
236
Modeling of photoplethysmography signal for quantitative analysis of endothelial cells during reactive hyperemia
237
Modeling of photoresist erosion in plasma etching processes
238
Modeling of photovoltaic and wind turbine based distributed generation in state estimation
239
Modeling of photovoltaic array and simulation of adaptive hysteresis current controlled inverter for solar application
240
Modeling of photovoltaic array using random forests technique
241
Modeling of photovoltaic based power stations for reliability studies using Markov chains
242
Modeling of photovoltaic fields in mismatching conditions by means of inflection voltages
243
Modeling of photovoltaic generation unit for power system studies
244
Modeling of photovoltaic microgrids for bulk power grid studies
245
Modeling of photovoltaic module from commercial specification in datasheet
246
Modeling of photovoltaic power plants
247
Modeling of photovoltaic solar array under different levels of partial shadow conditions
248
Modeling of Photovoltaic systems dissemination in a rural Thai village
249
Modeling of Physical Characteristics of Speech under Stress
250
Modeling of picosecond pulse propagation in microstrip interconnections of integrated circuits
251
Modeling of picosecond pump and probe photobleaching experiments on fast saturable absorbers
252
Modeling of Piezo-Actuated Positioning Systems
253
Modeling of piezoceramic composite transducer structures generating strong sound pulses in therapy
254
Modeling of piezoelectric actuator based on genetic neural network
255
Modeling of piezoelectric devices with the finite volume method
256
Modeling of piezoelectric multilayer ceramics using finite element analysis
257
Modeling of piezoelectric n-layered beam bending actuators for energy harvesting purposes
258
Modeling of piezoelectric sensor fidelity
259
Modeling of piezoelectric transformer and CCFL by PSPICE
260
Modeling of piezoelectric tube resonators for liquid sensing applications
261
Modeling of Piezoelectric-Driven Stick–Slip Actuators
262
Modeling of piezoresistive coefficients in Si hole inversion layers
263
Modeling of Pilot Based on Adaptive Neural Fuzzy Inference System
264
Modeling of pinned photodiode for CMOS image sensor
265
Modeling of Pinus Massoniana Based Morphological Architecture
266
Modeling of pipeline vibrations during the movement of cleaning piston
267
Modeling of pivot friction using relay function and estimation of its frictional parameters
268
Modeling of pixel sensors for image systems with VHDL-AMS
269
Modeling of pixelated detector in SPECT pinhole reconstruction
270
Modeling of Pixelated Detector in SPECT Pinhole Reconstruction
271
Modeling of plain knitted fabrics for their deformation control
272
Modeling of planar annular applicators for microwave thermotherapy
273
Modeling of planar applicators for microwave thermotherapy
274
Modeling of planar circuits including the effect of space-varying surface impedances
275
Modeling of planar dual-band bandpass filter in Microwave softwer
276
Modeling of planar dual-band microstrip patch antenna using Gaussian process regression
277
Modeling of planar dual-band microstrip patch antenna using Gaussian process regression
278
Modeling of planar inductors with non-uniform flux distribution and non-linear permeability for high-density integration
279
Modeling of Planar Microwave Filters
280
Modeling of planar microwave filters
281
Modeling of planar periodic antennas using Floquet´s theorem by the method of lines
282
Modeling of planar quasi-TEM superconducting transmission lines
283
Modeling of planar radial-guide antennas
284
Modeling of planar spiral antenna mounted on a rocket shaped structure using wedge diffraction analysis
285
Modeling of Planar Spiral Inductors Between Two Multilayer Media for Induction Heating Applications
286
Modeling of planar transformer parasitics using design of experiment methodology
287
Modeling of planar transformer with a unified CPW model
288
Modeling of planar vane slow wave structures for a travelig wave tube amplifier with sheet electron beam
289
Modeling of planar varactor frequency multiplier devices with blocking barriers
290
Modeling of plane electromagnetic wave diffraction on a conical antenna
291
Modeling of plane electromagnetic wave scattering by dielectric and meta-material cylinders
292
Modeling of plane waveguide array using the variational approach and aperture orthogonal polynomials method
293
Modeling of Plant Dynamics and Control based on Reinforcement learning
294
Modeling of plasma arc for the high power arc heater in MATLAB
295
Modeling of plasma behavior in a plasma electrode Pockels cell
296
Modeling of plasma conditions and spectral properties of radiation-heated matter
297
Modeling of Plasma Flow Around SMART-1 Spacecraft
298
Modeling of Plasma Formation and Evolution on the Surface of Ohmically Heated Conductors
299
Modeling of plasma formation in laser cutting
300
Modeling of Plasma Probe Interactions With a PIC Code Using an Unstructured Mesh
301
Modeling of plasma processing discharges
302
Modeling of plasma remediation of VOCs in dielectric barrier discharges
303
Modeling of plasma thrusters
304
Modeling of plasma-etch processes using well stirred reactor approximations and including complex gas-phase and surface reactions
305
Modeling of plasmas for dry etching in ULSI technologies
306
Modeling of Plasmon Resonances of Multiple Flat Noble-Metal Nanostrips With a Median-Line Integral Equation Technique
307
Modeling of plasmonic coatings in RCS computations
308
Modeling of plasmonic terahertz antennas using COMSOL® multiphysics
309
Modeling of plasmon-polariton refractive-index hollow core fiber sensors assisted by a fiber Bragg grating
310
Modeling of Plastic Deformation Effects in Ferromagnetic Thin Films
311
Modeling of PLC behavior by means of timed net condition/event systems
312
Modeling of Plug-in Hybrid Electric Vehicle Charging Demand in Probabilistic Power Flow Calculations
313
Modeling of PM synchronous motors for control and estimation tasks
314
Modeling of PMOS NBTI Effect Considering Temperature Variation
315
Modeling of PM-PM Dual Mechanical Ports Electric Machines
316
Modeling of PMSM with multiple saliencies using a stator-oriented magnetic circuit approach
317
Modeling of pocket implanted MOSFETs for anomalous analog behavior
318
Modeling of point search area and rescue path for maritime air crash
319
Modeling of polarimetric radar reflections from spatially-distributed objects and the algorithm based on coherent processing
320
Modeling of Polarization Effects in Au Nanodots Excited With InAs Quantum Dot Emitters for Use as a HAMR Heat Source
321
Modeling of polarization effects in InGaN PIN solar cells
322
Modeling of polarization rotator of the broadband scanning antenna array
323
Modeling of polarization switching in vertical-cavity surface-emitting lasers induced by spatial hole burning
324
Modeling of polarization-mode competition in fiber DFB lasers
325
Modeling of policy-based mobile payment
326
Modeling of pollution in p2p file sharing systems
327
Modeling of polycrystalline silicon thermal coefficient of resistance
328
Modeling of Polyimide MIM Capacitors for Applications in Planar Monolithic Microwave Integrated Circuits
329
Modeling of polymer nanocomposites: Permittivity vs. electric field intensity
330
Modeling of polymer neck generation and its effects on the etch profile for oxide contact hole etching using Ar, CHF/sub 3/, and CF/sub 4/ gases
331
Modeling of polymer Schottky diodes for real device applications
332
Modeling of polyphase brushless exciter behavior for failing diode operation
333
Modeling of Polysilicon Depletion Effect in Recessed-Channel MOSFETs
334
Modeling of polysilicon diffusion sources
335
Modeling of polysilicon dopant diffusion for shallow-junction bipolar technology
336
Modeling of Population Density Based on GIS and RS
337
Modeling of pore formation in solid
338
Modeling of positional plasma characteristics by inserting body tube of optical emission spectroscopy for plasma assisted atomic layer deposition system
339
Modeling of Positive Leader Speed Under Slow Front Voltages—Part I: Long Air Gaps
340
Modeling of positive-displacement fluid dispensing processes
341
Modeling of possible hot-hohlraum targets for use in high-energy density experiments at the NIF
342
Modeling of Post Soft Breakdown Conduction through Ultrathin High-k Gate Dielectrics
343
Modeling of Posting Behavior in Mobile Internet Based on Human Dynamcis
344
Modeling of potential interstate electricity markets in northeast asia
345
Modeling of potential transformers for the very fast transient simulation based on wideband scattering parameter measurements
346
Modeling of potential transformers in gas insulated substation for the very fast transient simulation
347
Modeling of powder absorption in additive manufacturing
348
Modeling of power batteries based on subspace identification method
349
Modeling of power consumption by nonlinear inertial production
350
Modeling of Power Consumption for Macro-, Micro-, and RRH-Based Base Station Architectures
351
Modeling of power consumption in manufacturing: Gross and detailed planning in consideration of all forms of energy as planning resources including load management during runtime
352
Modeling of power converters for debugging digital controllers through FPGA emulation
353
Modeling of power delivery into 3D chips on silicon interposer
354
Modeling of power devices for enabling smart energy consumption
355
Modeling of power devices with Drift Region Integrated Microchannel Cooler
356
Modeling of power diodes with the lumped-charge modeling technique
357
Modeling of power distribution networks for mixed signal applications
358
Modeling of Power Distribution Networks for path finding
359
Modeling of power distribution networks with retardation using the transmission matrix method
360
Modeling of power distribution networks with signal lines for SPICE simulators
361
Modeling of power distribution systems for high-performance microprocessors
362
Modeling of power distribution systems in PCs
363
Modeling of power electronic loads in AC distribution systems using the generalized State-space averaging method
364
Modeling of Power Electronic Systems Using Signal Flow Graphs
365
Modeling of power factor charge for photovoltaic generation system based on its contribution to power systems
366
Modeling of power generation pollutant emissions based on locational marginal prices for sustainable water delivery
367
Modeling of power reflection in microwave detected photoconductance decay [in Si solar cells]
368
Modeling of power reserves and RES in optimization of Polish energy mix
369
Modeling of power semiconductor devices, problems, limitations and future trends
370
Modeling of Power Split Device for heavy-duty vehicles
371
Modeling of power split device with clutch for heavy-duty millitary vehicles
372
Modeling of power supply noise in large chips using the circuit-based finite-difference time-domain method
373
Modeling of power supply noise in large chips with nonlinear circuits
374
Modeling of power supply noise using efficient macro-model of non-linear driver
375
Modeling of Power Supply Noise with Non-Linear Drivers using Recurrent Neural Network (RNN) Models
376
Modeling of power supply parasitics for selecting on-wafer bypass capacitance in high-speed IC designs
377
Modeling of power system based on timed DPN
378
Modeling of power system communications-recognition of technology maturity levels and case study of a migration scenario
379
Modeling of power system dynamic devices incorporated in Dynamic Computation for Power Systems (DCPS) for transient stability analysis
380
Modeling of Power System Embedded With Thyristor Controlled Resistive Brake and Static Reactive Power Compensator for Small Signal Stability Investigation
381
Modeling of power transmission lines for lightning back flashover analysis (A case study: 220kV Biyagama-Kotmale transmission line)
382
Modeling of power transmission through an elastic wall by piezoelectric transducers and acoustic waves
383
Modeling of power/ground plane noise in high speed digital electronics packaging
384
Modeling of Power/Ground Planes Using Triangular Elements
385
Modeling of power-controlled interference-limited wireless channels
386
Modeling Of Powerful Microwave Pulse Propagation In Air Breakdown Environment
387
Modeling of power-plane segmentation with cavity and planar-lumped models
388
Modeling of power-supply subsystems of microgrid using Petri nets
389
Modeling of practical multi-octave-band helical slow-wave structures of a traveling-wave tube for interaction impedance
390
Modeling of practical nonidealities in a permanent magnet synchronous motor drive
391
Modeling of prebreakdown VI characteristics of a wire-plate electrostatic precipitator operating under combined dc-pulse energization
392
Modeling of precise indoor positioning system
393
Modeling of Precision ReliabiLity for NC Machine Tool Based on Multi-body System Theory
394
Modeling of pre-regulator boost ZCS interleaved operating in critical conduction mode and with high power factor
395
Modeling of pressure effects in HVDC cables
396
Modeling of price effects for the adoption of LCD TV
397
Modeling of primate optokinetic and vestibulo-ocular systems based on single unit recording of cerebellar flocculus Purkinje cell activity
398
Modeling of printed antennas on electrically thick subtrate for THz focal plane array
399
Modeling of Printed Circuit Board loop inductance
400
Modeling of printed circuit boards and microstrip antennas based on the MoM hybridized with special Green´s function and multiport network approach
401
Modeling of printed circuit cards subject to vibration
402
Modeling of printed periodic structures with thick metal patches by the MoM/BI-RME method
403
Modeling of printed periodic structures with thick metal patches by the MoM/BI-RME method
404
Modeling of printed spiral inductors for remote powering of implantable biosensors
405
Modeling of Printed Wavy Edge Patterns in TFT Channel Area
406
Modeling of prioritized admission control supporting adaptive performance management in integrated voice/data CDMA systems
407
Modeling of priority queueing service in discrete event systems using hybrid Petri nets
408
Modeling of PRML timing loop as a Kalman filter
409
Modeling of Probabilistic Ripple-Carry Adders
410
Modeling of problematic aspects in the web site development process
411
Modeling of processes of work oF cellular systems of mobile communication
412
Modeling of processor delay and overall reduction in network latencies for real time, interactive applications
413
Modeling of process-oriented learning designs
414
Modeling of Product Development Management in Virtual Enterprise Based on Unified Modeling Language
415
Modeling of production defect stream formation and transformation at realization of technological and control procedures
416
Modeling of products sale velocity and products recommended structure on the basis of a data reduction method
417
Modeling of profile effects for inductive helicon plasma sources
418
Modeling of profile effects for large area inductive coupled plasma sources
419
Modeling of Programming and Read Performance in Phase-Change Memories—Part I: Cell Optimization and Scaling
420
Modeling of Programming and Read Performance in Phase-Change Memories—Part II: Program Disturb and Mixed-Scaling Approach
421
Modeling of propagation and cross-talk in interconnects using SPICE
422
Modeling of propagation delay profile in urban areas surrounded by mountains
423
Modeling of Propagation on and Interaction between Body-mounted Antennas
424
Modeling of propeller electric airplane and thrust control using advantage of electric motor
425
Modeling of Prosthetic Limb Rotation Control by Sensing Rotation of Residual Arm Bone
426
Modeling of protective devices for voltage sag studies in distribution systems
427
Modeling of protective relay systems for power system dynamic simulations
428
Modeling of proton exchange membrane fuel cell for simulation of hybrid systems with renewable energy sources
429
Modeling of proton-induced CCD degradation in the Chandra X-ray Observatory
430
Modeling of Proximity Effect on Positive Leader Inception and Breakdown of Long Air Gaps
431
Modeling of pseudospark pulsed plasma x-ray generation for portable medical devices
432
Modeling of PSF for refractive index variation in fluorescence microscopy
433
Modeling of Pulmonary Crackles Using Wavelet Networks
434
Modeling of pulse compressors using Kostenbauder matrices
435
Modeling of Pulse Propagation in Layered Structures With Resonant Nonlinearities Using a Generalized Time-Domain Transfer Matrix Method
436
Modeling of pulse responses from time-evolving ocean-like surfaces
437
Modeling of pulse transformer with nano-second excitation source using Jiles-Atherton method
438
Modeling of Pulse Transformers with Parallel- and Non-Parallel-Plate Windings for Power Modulators
439
Modeling of Pulse Transit Time under the Effects of Hydrostatic Pressure for Cuffless Blood Pressure Measurements
440
Modeling of Purchase and Sales Contracts in Supply Chain Optimization
441
Modeling of pure percussive drilling for autonomous robotic bridge decks rehabilitation
442
Modeling of purely strain-induced CEO GaAs/In0.16Al0.84As quantum wires
443
Modeling of PV module to study the performance of MPPT controller under partial shading condition
444
Modeling of PV module with consideration of environmental factors
445
Modeling of PWM converters in discontinuous conduction mode. A reexamination
446
Modeling of PWM Drive Motor System CM Noise Source
447
Modeling of PWM drive motor system DM noise source
448
Modeling of PWM inverter-fed IPMSM Drive System and its application to Hybrid Vehicle
449
Modeling of PWM inverter-supplied AC drives at low switching frequencies
450
Modeling of PWS mobile manipulator including slipping of carrying objects
451
Modeling of QoS-oriented content delivery networks
452
Modeling of Quadrotor Helicopter Dynamics
453
Modeling of quadruple tank system using support vector regression
454
Modeling of quality control points of equipment maintenance process
455
Modeling of quantitative microinjection and adaptive control
456
Modeling of Quantization Effects in Digitally Controlled DC–DC Converters
457
Modeling of quantization effects in digitally controlled DC-DC converters
458
Modeling Of Quantization Noise In Switched-current Sigma-delta Modulator Using VHDL-AMS
459
Modeling of Quantized Conductance Effects in Electrochemical Metallization Cells
460
Modeling of quantum capacitance of Graphene Nanoribbons
461
Modeling of quantum cascade laser sources with giant optical nonlinearities
462
Modeling of Quantum Cutting Systems in \\hbox {Tm}^{3+}/ \\hbox {Yb}^{3+} -Codoped Spectral Converters for sc-Si Solar-Cell Efficiency Enhancement
463
Modeling of quantum effects for ultrathin oxide MOS structures with an effective potential
464
Modeling of quantum effects in ultrasmall HEMT devices
465
Modeling of quantum mechanical effects in ultra-thin body nanoscale double-gate FinFET
466
Modeling of quantum nanomechanics
467
Modeling of quantum parallel resonant converters-a new parallel resonant converters controlled by integral cycle mode
468
Modeling of quantum series resonant converters-controlled by integral cycle mode
469
Modeling of quantum-well lasers for computer-aided analysis of optoelectronic integrated circuits
470
Modeling of quantum-well lasers with electro-opto-thermal interaction
471
Modeling of quartz crystal oscillators by using nonlinear dipolar method
472
Modeling of quasi-stationary signals using temporal fuzzy sets and time-frequency distributions
473
Modeling of Quench Limit for Steady State Heat Deposits in LHC Magnets
474
Modeling of radar interference impact on VoLTE service
475
Modeling of radar moniter system using computer simulation
476
Modeling of radar responses to forest physical parameters
477
Modeling of radar scattering from oil films
478
Modeling of radar scattering from turbulent spraying jets
479
Modeling of radar signatures of rain cells over the sea
480
Modeling of radial forces due to eccentricity in a permanent-magnet synchronous motor using perturbation theory
481
Modeling of radial microstrip bends
482
Modeling of radiated characteristics of plasma-surrounded antenna
483
Modeling of radiated electromagnetic emission coming from interface cables of an equipment
484
Modeling of radiated emission from data transmission cables
485
Modeling of radiated immunity measurements by an active two-port model
486
Modeling of radiating effects in transistors
487
Modeling of radiating equipment by distributed dipoles using metaheuristic methods
488
Modeling of radiation dose of human head during CT scanning using neural networks
489
Modeling of radiation effects in MOSFETs
490
Modeling of Radiation Effects in Silicon Photonic Devices
491
Modeling of radiation induced burnout in DMOS transistors
492
Modeling of radiation induced luminescence and how to reduce Cherenkov effect in optical fibers
493
Modeling of radiation losses in ultrahigh power laser matter interaction
494
Modeling of radiation near-field pattern of hybrid-reflector antenna irradiated by conformal antenna array
495
Modeling of radiation resistance of 60 GHz on-chip dipole
496
Modeling of Radiation, Conductor, and Dielectric Losses in SIW Components by the BI-RME Method
497
Modeling of radiation-induced displacement damage in silicon solar cells: Frenkel defect
498
Modeling of Radiation-Induced Leakage and Low Dose-Rate Effects in Thick Edge Isolation of Modern MOSFETs
499
Modeling of radiation-induced leakage currents in CMOS/SOI devices
500
Modeling of radiation-induced mobility degradation in MOSFETs
501
Modeling of radiation-induced single event transients in SOI FinFETS
502
Modeling of radio frequency electromagnetic disturbances in power line communication networks
503
Modeling of radio-frequency effects on a microcontroller
504
Modeling of Radiometric Signals for Medical Applications
505
Modeling of radiopaths for mobile communication systems in the presence of shading produced by forest
506
Modeling of radiowave propagation in tunnels
507
Modeling of radiowave scattering in the melting layer of precipitation
508
Modeling of rain attenuation using equiprobability of rain fade and rain fall
509
Modeling of rain cell impact on Ku Band scatterometer data
510
Modeling of rain drop-size distribution for Indian region
511
Modeling of rain fields at large scale
512
Modeling of Rainfall Prediction over Myanmar Using Polynomial Regression
513
Modeling of random access channel for limited user network
514
Modeling of random channel parameter variations in MOS transistors
515
Modeling of random natural textures using a spatially variant multiplicative autoregressive model
516
Modeling of Random Shading Effects in Solar Cells
517
Modeling of Random Telegraph Noise under circuit operation — Simulation and measurement of RTN-induced delay fluctuation
518
Modeling of random UWB signals and its characteristics in information systems
519
Modeling of random UWB signals and its characteristics in information systems
520
Modeling of range sensing and object detection, for vehicle active safety
521
Modeling of rapid heating and quencing stages during the hight - energy induction treatment
522
Modeling of rarefied gas heat conduction between wafer and susceptor
523
Modeling of Rate and Perceptual Quality of Compressed Video as Functions of Frame Rate and Quantization Stepsize and Its Applications
524
Modeling of rate and perceptual quality of video and its application to frame rate adaptive rate control
525
Modeling of Rate Error in Interferometric Fiber-Optic Gyroscopes Due to Stress Induced by Moisture Diffusion
526
Modeling of rate-dependent asymmetric hysteresis nonlinearity for magnetostrictive actuators
527
Modeling of rate-dependent hysteresis in piezoelectric actuators
528
Modeling of rate-dependent hysteresis using extreme learning machine based neural model
529
Modeling of RC interconnect circuit and its recursive algorithm
530
Modeling of reactive impedance surface´s diffraction with application of MoM-GEC method
531
Modeling of Reactive Power Control System of HVDC
532
Modeling of readback signal generated by scanning PCM surfaces
533
Modeling of readout circuit for acquisition of sensory signal through non-contact means
534
Modeling of real bistables in VHDL
535
Modeling of real defect outlines and parameter extraction using a checkerboard test structure to localize defects
536
Modeling of real defect outlines for defect size distribution and yield prediction
537
Modeling of realistic on-chip power grid using the FDTD method
538
Modeling of realistic rectangular /spl mu/-coaxial lines
539
Modeling of real-shaped LTCC stripline structure having sharpened edges and embedded pores
540
Modeling of real-time embedded systems using SysML and its verification using UPPAAL and DiVinE
541
Modeling of real-time flight control system for small coaxial helicopter
542
Modeling of real-time monitoring and simulation for plastic injection molding process
543
Modeling of Real-Time Signal Timing for a Single Intersection in Urban Traffic Networks
544
Modeling of real-time signal timing for multi-intersection in urban traffic network
545
Modeling of Real-Time System Designs for Parametric Analysis
546
Modeling of Reasoning in Intelligent Systems by Means of Integration of Methods Based on Case-Based Reasoning and Inductive Notions Formation
547
Modeling of rebound phenomenon between ball and racket rubber with spinning effect
548
Modeling of rebound phenomenon of a rigid ball with friction and elastic effects
549
Modeling of received signals from annular array ultrasound transducers due to extended reflectors
550
Modeling of received signals from finite reflectors in pulse-echo ultrasound
551
Modeling of received signals from interfaces of arbitrary geometry
552
Modeling of received ultrasound signals from finite planar targets
553
Modeling of recloser and sectionalizer and their coordination using PSCAD
554
Modeling of recloser operation schemes under system ground fault using EMTP-ATPDraw
555
Modeling of reconfigurable material handling system consisting of multiple mobile robots
556
Modeling of Reconfiguration Control Applications based on the IEC 61499 Reference Model for Industrial Process Measurement and Control Systems
557
Modeling of rectangular camera with four sorces for microwave heating
558
Modeling of rectangular contacts for noise coupling analysis in homogeneous substrates
559
Modeling of redundancy analyzer in BISR for RAM
560
Modeling of re-entrant coaxial and combline resonators and filters
561
Modeling of reflectarray elements by means of MetaPSO-based Artificial Neural Network
562
Modeling of reflection and transmission of signal through building wall for a point source UWB transmitter
563
Modeling of reflection coefficient fluctuation from measured seafloor roughness
564
Modeling of reflections and air absorption in acoustical spaces a digital filter design approach
565
Modeling of reflection-transmission grating based 2DIO wavelength router
566
Modeling of reflectograms of optical line that includes fiber with different level of Rayleigh scattering and values of numerical apertures
567
Modeling of reflectograms of optical line that includes fibres with different level of Rayleigh scattering
568
Modeling of Reflex Triode Virtual Cathode Oscillator
569
Modeling of reformer tube metal temperature
570
Modeling of refreshing sleep aid service based on ubiquitous computing
571
Modeling of regional dynamic CO2 reactivity in respiratory related brain areas using BOLD fMRI
572
Modeling of Regular Conducting and Superconducting Boundaries in TLM
573
Modeling of regulating power market based on AC optimal power flow considering losses and electric vehicles
574
Modeling of regulatory volume decrease in mesangial cells
575
Modeling of reheating-furnace dynamics using neural network based on improved sequential-learning algorithm
576
Modeling of Relative Permeability of Permanent Magnet Material Using Magnetic Surface Charges
577
Modeling of relativistic backward wave oscillators
578
Modeling of reliability with possibility theory
579
Modeling of Replacement Alternatives for Power Transformer Populations
580
Modeling of replicate-at-send multicasting in shared-memory ATM switches
581
Modeling of replicates variances for detecting RNA methylation site in MERIP-SEQ data
582
Modeling of Resistance in FinFET Local Interconnect
583
Modeling of resistance in FinFET local interconnect
584
Modeling of resistive sheets in finite element solutions [EM scattering]
585
Modeling of resistively loaded surface GPR antennas
586
Modeling of resonant antennas for communication systems using the method of auxiliary sources
587
Modeling of resonant converter with nonlinear inductance
588
Modeling of resonant inverters with high harmonic content using the extended describing function method
589
Modeling of resonant-tunneling diode with “Quant ST”
590
Modeling of resonant-tunneling diode with uniform and graded emitter
591
Modeling of Resonator Cambers for Vacuum-Plasma Processing and Thin-Film Covering of Multilayered Planar Substrates
592
Modeling of resources for a third generation cellular communication system: an object-oriented approach
593
Modeling of respiration and estimation of pulmonary elastance
594
Modeling of respiratory crackles
595
Modeling of Retention Failure Behavior in Bipolar Oxide-Based Resistive Switching Memory
596
Modeling of retention time distribution of DRAM cell using a Monte-Carlo method
597
Modeling of Retention Time for High-Speed Embedded Dynamic Random Access Memories
598
Modeling of Reverberant Radio Channels Using Propagation Graphs
599
Modeling of reverberation chamber using FMM-Accelerated hybrid integral equation
600
Modeling of reverse current behavior in amorphous thin and thick p-i-n diodes
601
Modeling of reverse recovery effect for embedded diode in SJ MOSFET
602
Modeling of reverse subthreshold currents in the A-Si:H TFTs
603
Modeling of RF coupling on SSC silicon microstrip detector
604
Modeling of RF energy scavenging for batteryless wireless sensors with low input power
605
Modeling of RF filter component based on film bulk acoustic resonator
606
Modeling of RF heating due to metal implants in MRI
607
Modeling of RF- MEMS BAW Resonator
608
Modeling of RF plasma discharges of CH/sub 4/ for carbon film deposition
609
Modeling of RF security system using smart antennas
610
Modeling of RF Seeker Dynamics and Noise Characteristics for Estimator Design in Homing Guidance Applications
611
Modeling of rice productivity in India
612
Modeling of rider-bicycle interactions with learned dynamics on constrained embedding manifolds
613
Modeling of ridge-waveguide MQW DFB lasers based on spectral index transfer matrix method
614
Modeling of Rigid-Flexible Coupling System Dynamics for Railway Vehicles with Flexible Bogie Frame
615
Modeling of ring resonators with tunable couplers
616
Modeling of RLC interconnect delay for ramp input using diffusion model approach
617
Modeling of RLC interconnect lines
618
Modeling of robot inverse kinematics using two ANN paradigms
619
Modeling of robots in contact with a dynamic environment
620
Modeling of rock structural plane destabilizing process based on cellular automata
621
Modeling of rod-pinch-diode performance at 2 to 4 MV
622
Modeling of roll eccentricity based on modified FFT
623
Modeling of rotary machines using finite-element method of transient magnetic field computation
624
Modeling of rotor bar skew effect in induction motor based on modification of 2D-modified winding function method
625
Modeling of rotor based harmonics in dual-star, wound field, synchronous machines
626
Modeling of roughness effects on electromagnetic waves propagation above sea surface using 3D parabolic equation
627
Modeling of roughness-salinity microwave anomalies at S and L bands
628
Modeling of rough-surface effects in an optical turning mirror using the finite-difference time-domain method
629
Modeling of round trip time over the internet
630
Modeling of RTD-gated GaN HEMTs at Terahertz frequencies using a full-wave simulation toolset coupled with particle-based equations
631
Modeling of RTS noise in MOSFETs under steady-state and large-signal excitation
632
Modeling of runaway electron damage for the design of tokamak plasma facing components
633
Modeling of saccadic movements using neural networks
634
Modeling of Salient-Pole Synchronous Machines Assisted by Permanent Magnets
635
Modeling of salient-pole synchronous motor considering saturation effect
636
Modeling of Salient-Pole Wound-Rotor Synchronous Machines for Population-Based Design
637
Modeling of salient-pole wound-rotor synchronous machines for population-based design
638
Modeling Of Sar Imaging Of Ocean Waves Using A Subwindowing Technique
639
Modeling of Sar Returns from a Red Pine Stand
640
Modeling of satellite borne TDI CCD pitching imaging image motion velocity vector
641
Modeling of saturable Q-switch absorbers
642
Modeling of saturated AC machines including air gap flux harmonic components
643
Modeling of Saturated Induction Machines With Injected High-Frequency Signals
644
Modeling of Saturated Synchronous Generator Based on Steady-State Operating Data
645
Modeling of saturated synchronous generator based on steady-state operating data
646
Modeling of Saturation Due to Main and Leakage Flux Interaction in Induction Machines
647
Modeling of saturation effects in the magnetizing branch of an induction motor using PSpice
648
Modeling of saturation in salient pole synchronous machines
649
Modeling of saturation velocity for simulation of deep submicron nMOSFETs
650
Modeling of SAW resonators fabricated on GaN/Si
651
Modeling of Sawyer planar sensor and motor dependence on planar yaw angle rotation
652
Modeling of S-Band Amplification for Tm3+-Doped Fluoride Fiber With Cooperative Lasing at 1.8 μm
653
Modeling of SBR aerobic granular sludge using neural network with GSA and IW-PSO
654
Modeling of scalable TCP for AQM design in high speed networks
655
Modeling of scale-free network based on pagerank algorithm
656
Modeling of scanning laser polarimetry images of the human retina for progression detection of glaucoma
657
Modeling of Scattering at High-k Dielectric/SiO2 Interface of Strained SiGe MOSFETs
658
Modeling of scattering by a rough surface of layered media
659
Modeling of scattering by particle on layered substrate
660
Modeling of scattering dominated ultrasonic attenuation using power-law function
661
Modeling of Scheduling Algorithms of Downstream Channel Bonding in DOCSIS3.0 Based on GSPN
662
Modeling of schottky and ohmic contacts between metal and graphene nanoribbons using extended hückel theory (EHT)-based NEGF method
663
Modeling of Schottky barrier diode millimeter-wave multipliers at cryogenic temperatures
664
Modeling of Schottky coupled transistor logic
665
Modeling of scientific research information management system based on workflow
666
Modeling of Scintillation Cameras With Multi-Zone Architecture and Pileup Prevention Circuitry
667
Modeling of sea spike events with generalized extreme value distribution
668
Modeling of sea-roughness radiometric effects for the retrieval of surface salinity at 14.3 GHz
669
Modeling of Second Generation HTS Cables for Grid Fault Analysis Applied to Power System Simulation
670
Modeling of Secondary Arc Conditions on Satellite Solar Array
671
Modeling of secondary neutron production from space radiation interactions
672
Modeling of Secondary Voltage Regulation for 24-hour load flow and dynamic simulation for coordinated voltage control application
673
Modeling of second-life batteries for use in a CERTS microgrid
674
Modeling of sediment resuspension in Neva Bay during strong wind events
675
Modeling of Seeded Reflective Modulators for DWDM Systems
676
Modeling of segmentation clock mechanism in presomitic mesoderm
677
Modeling of SEI Formation Based on a Electrochemical Reduced Order Model for Li(MnNiCo)O2/Carbon Polymer Battery
678
Modeling of Seismic Wave Propagation at the Scale of the Earth on a Large Beowulf
679
Modeling of Selective Carbon Nanotubes Growth for Non-classical Memory Applications
680
Modeling of selective microwave devices on circular waveguides
681
Modeling of Selective Photon Capture for Collection of Fluorescence Emitted from Dermally-Implanted Microparticle Sensors
682
Modeling of self consistent field due to volume charge using charge simulation method and method of characteristics line
683
Modeling of self-adaptive systems with SCADE
684
Modeling of Self-Aligned Vertical ZnO Thin-Film Transistors
685
Modeling of self-alignment mechanism in flip-chip soldering. II. Multichip solder joints
686
Modeling of self-compensating wideband antennas for peer-to-peer communications in distributed sensing arrays
687
Modeling of self-excitation of induction motors for electric networks auxiliaries under post-fault conditions
688
Modeling of self-healing managed object for TMN
689
Modeling of self-heating effect for depletion-type Si micro-ring modulator
690
Modeling of self-heating in GaAs/AlGaAs HBTs for accurate circuit and device analysis
691
Modeling of Self-Heating Mechanism in the Design of Superconducting Limiters
692
Modeling of self-initialized electrostatic energy scavenger
693
Modeling of Self-Repairing Aircraft Based on Multi-agent System
694
Modeling of self-similar network traffic using artificial neural networks
695
Modeling of self-sustained pulsations in surface-emitting injection lasers
696
Modeling of semi-anechoic chamber for use in automotive EMC simulations
697
Modeling of Semiconductor Detectors Made of Defect-Engineered Silicon: The Effective Space Charge Density
698
Modeling of semiconductor laser with large signal modulation
699
Modeling of semiconductor optical amplifier gain characteristics for amplification and switching
700
Modeling of semiconductor optical amplifier RIN and phase noise for optical PSK systems
701
Modeling of semiconductor optical amplifiers for interferometric switching applications
702
Modeling of semiconductor substrate on on-chip power grid switching
703
Modeling of Sensitivity of fabricated Capacitive Pressure Sensor
704
Modeling of sensor data and context for the Real World Internet
705
Modeling of sensor nets in Ptolemy II
706
Modeling of Sensor Networks Using XRM
707
Modeling of sensor-based robotic task plans using fuzzy Petri nets
708
Modeling of separate meter in and Separate Meter out control system
709
Modeling of separation behavior of epoxy/Cu interface using molecular dynamics simulation
710
Modeling of sequential control system with cyclic scan by Petri net
711
Modeling of Series Static Voltage Restorer (SSVR) in Distribution Systems Load Flow
712
Modeling of Serious Global Trends for Use with Combat Simulations
713
Modeling of service availability
714
Modeling of services and their collaboration in enterprise cloud bus (ECB) using UML 2.0
715
Modeling of Set and Reset Operations of Phase-Change Memory Cells
716
Modeling of SET protocol based on UML and colored Petri net
717
Modeling of Set/Reset Operations in NiO-Based Resistive-Switching Memory Devices
718
Modeling of SEU from individual nuclear particles
719
Modeling of Several Concentric Layers of Superconducting Filaments
720
Modeling of shallow water ambient noise based on adiabatic mode theory
721
Modeling of shallow water sea ambient noise using artificial neural network
722
Modeling of shape memory alloy actuator and tracking control system with the model
723
Modeling of shaped beam satellite antenna patterns
724
Modeling of sheet-concentration and temperature-dependent resistivity of a suspended monolayer graphene
725
Modeling of SHG and OPO performance
726
Modeling of shielded, suspended and inverted, microstrip lines
727
Modeling of shielding effectiveness of reinforced concrete walls for electromagnetic pulse
728
Modeling of shielding effectiveness of reinforced concrete walls for electromagnetic pulse
729
Modeling of shift hydraulic system for automatic transmission
730
Modeling of shift register-based ATM switch
731
Modeling of ship manoeuvring motion using optimized support vector machines
732
Modeling of ship trajectory in collision situations by an evolutionary algorithm
733
Modeling of ship vertical motion with self-organizing radial basis function artificial neural network
734
Modeling of shock-wave generation in water by electrical discharges
735
Modeling of short circuit power consumption using timing-only logic cell macromodels
736
Modeling of short geometry polycrystalline-silicon thin-film transistor
737
Modeling of short, single-frequency, fiber lasers in high-gain fiber
738
Modeling of Short-Channel Effects in Organic Thin-Film Transistors
739
Modeling of short-gap ESD under consideration of different discharge mechanisms
740
Modeling of short-pulse threshold voltage shifts due to DX centers in AlxGa1-xAs/GaAs and AlxGa1-x As/InyGa1-yAs MODFET´s
741
Modeling of short-term large-disturbance voltage stability considering induction motors
742
Modeling of Si Etching Under Effects of Plasma Molding in Two-Frequency Capacitively Coupled Plasma in SF6/O2 for MEMS Fabrication
743
Modeling of Si Schottky diodes and its application in THz imaging
744
MOdeling of SI-based thin film triple-junction solar cells
745
Modeling of SiC IGBT Turn-Off Behavior Valid for Over 5-kV Circuit Simulation
746
Modeling of SiC MOSFET in Matlab/Simulink
747
Modeling of SiC MOSFET with temperature dependent parameters and its applications
748
Modeling of SiC power modules with double sided cooling
749
Modeling of side wall passivation and ion saturation effects on etching profiles
750
Modeling of SiGe power HBT intermodulation distortion using HICUM
751
Modeling of SiGe spike mono emitter HBT with HICUM in static and dynamic operations
752
Modeling of Sigma-Delta Modulator Non-Idealities in MATLAB/SIMULINK
753
Modeling of Sigma-Delta Modulator Non-idealities with Two Step Quantization in MATLAB/SIMULINK
754
Modeling of Signal and Power Integrity in System on Package Applications
755
Modeling of signal envelope correlation of line-of-sight fading with applications to frequency correlation analysis
756
Modeling of signal integrity in bus communications with timed data flow SystemC-AMS
757
Modeling of signal-noise interactions in nonlinear fiber transmission with different modulation formats
758
Modeling of signals of pulse origin on the basis of sparse approximation scheme
759
Modeling of SILC based on electron and hole tunneling. I. Transient effects
760
Modeling of SILC based on electron and hole tunneling. II. Steady-state
761
Modeling of silicon carbide (SiC) power devices for electronic switching in low voltage applications
762
Modeling of Silicon Carbide ECR Etching by Feed-Forward Neural Network and Its Physical Interpretations
763
Modeling of silicon heterojunction solar cells
764
Modeling of silicon MEMS capacitive pressure sensor for biomédical applications
765
Modeling of silicon micromachined heat flux sensor
766
Modeling of silicon photonics devices with Verilog-A
767
Modeling of silicon quantum dots for solar cell applications
768
Modeling of silicon solar cells voltage increase on localized emitter area approach
769
Modeling of simple antennas near to and penetrating an interface
770
Modeling of simple antennas near to and penetrating an interface
771
Modeling of simultaneous switching ground noise for BiCMOS drivers
772
Modeling of simultaneous switching ground noise for gallium arsenide DCFL drivers
773
Modeling of simultaneous switching noise effects on jitter characteristics of delay locked loop in a hierarchical system of chip-Package-PCB
774
Modeling of simultaneous switching noise in high speed systems
775
Modeling of simultaneous switching output by equivalent source impedance
776
Modeling of sinewave inverters: a geometric approach
777
Modeling of Single and Double Gate Thin Film SOI MOSFETs
778
Modeling of Single Event Transients With Dual Double-Exponential Current Sources: Implications for Logic Cell Characterization
779
Modeling of single junction anisotype dilute nitride multi quantum well solar cell for improvement in efficiency
780
Modeling of single multimode fiber imaging
781
Modeling of single phase four quadrant converter using a multifrequency averaging approach
782
Modeling of Single Phase Inverter of Photovoltaic System Using System Identification
783
Modeling of Single Photon Avalanche Diode Array Detectors for PET Applications
784
Modeling of single photon avalanche diode array detectors for PET applications
785
Modeling of single router network based on Markov process
786
Modeling of single turn coil impedance including wiring effects
787
Modeling of Single-and Multimode Photonic-Crystal Planar Waveguides with Plane-wave Admittance Method: Losses and Modes Coupling
788
Modeling of single-channel optical transmission systems with high-order ASK and PSK modulation formats
789
Modeling of single-electron 1D and 2D arrays using physical models
790
Modeling of single-event effects in circuit-hardened high-speed SiGe HBT logic
791
Modeling of Single-Event Upset in Bipolar Integrated Circuits
792
Modeling of single-HB PWM modulated dual active bridge DC-DC converter with multifrequency average approach
793
Modeling of single-phase core type transformer
794
Modeling of single-phase flows in separation equipment
795
Modeling of Single-Section Quantum Dot Mode-Locked Lasers: Impact of Group Velocity Dispersion and Self Phase Modulation
796
Modeling of single-stage converters with high power factor and fast regulation
797
Modeling of Single-Step Power Control Scheme in Finite-State Markov Channel and Its Impact on Queuing Performance
798
Modeling of single-transistor latch behavior in partially-depleted (PD) SOI CMOS devices using a concise SOI-SPICE model
799
Modeling of Situation-Middleware for TPO metadata based on Event-Condition-Action Rule
800
Modeling of six-phase Double Fed Induction Machine for autonomous DC voltage generation
801
Modeling of six-phase synchronous generator forimpartial renewable energy generation
802
Modeling Of Skeletal Muscle Contraction At The Molecular Level
803
Modeling of skeletal musculature based on MRI - Calculation of the moment arm about the pronation-of-forearm and the forearm supinate -
804
Modeling of skew using the flux-MMF diagram [of PM machines]
805
Modeling of skid-steer mobile manipulators using spatial vector algebra and experimental validation with a compact loader
806
Modeling of skin tissue ablation by nanosecond pulses from ultraviolet to near-infrared and comparison with experimental results
807
Modeling of slip for wheeled mobile robots
808
Modeling of Sloped Interfaces on a Yee Grid
809
Modeling of slotless surface-mounted PM synchronous motor for sensorless applications
810
Modeling of Slow Light in Vertical Cavity Surface Emission Lasers
811
Modeling of slow-wave EBG structure for printed-bowtie antenna array
812
Modeling of Sludge Compost Maturity Degree Based on Radial Basic Function Network for Sewage Treatment
813
Modeling of small band-gap CNT for designing of faster switching CNTFET
814
Modeling of small hydro power plants
815
Modeling of small wind energy based of PMSG in South of Algeria
816
Modeling of small-signal cross-modulation in WDM optical systems with erbium-doped fiber amplifiers
817
Modeling of small-signal minority-carrier transport in bipolar devices at arbitrary injection levels
818
Modeling of small-size cylindrical arrays
819
Modeling of smart compliant electro-active polymer actuator
820
Modeling of smart dampers for vibration control
821
Modeling of Smart Grid traffics using non-preemptive priority queues
822
Modeling of smart textile materials for ESD applications
823
Modeling of Smoke from a Single View
824
Modeling of snow attenuation at mobile frequencies
825
Modeling of snow wetness inversion using multi-polarization SAR at C-Band
826
Modeling of SO2 conversion in the process of acid-making
827
Modeling of SOA-based high speed all-optical wavelength conversion with optical filter assistance
828
Modeling of social environment in multi-agent systems
829
Modeling of Social Transitions Using Intelligent Systems
830
Modeling of sodium/metal chloride batteries
831
Modeling of soft and hard surfaces using asymptotic boundary conditions
832
Modeling of Soft Fiber-Reinforced Bending Actuators
833
Modeling of soft fingertip for object manipulation using tactile sensing
834
Modeling of soft magnetic composite material using a non linear homogenization method
835
Modeling of soft magnetic composites
836
Modeling of Soft Poroelastic Tissue in Time-Harmonic MR Elastography
837
Modeling of Soft-Switching Losses of IGBTs in High-Power High-Efficiency Dual-Active-Bridge DC/DC Converters
838
Modeling of software agents´ societies in knowledge-based organizations. The results of the study
839
Modeling of software failure cost in ERP systems
840
Modeling of Software Partition for Distributed Real-Time Applications
841
Modeling of software radio aspects by mapping of SDL and CORBA
842
Modeling of software reusable component approach and its case study
843
Modeling of SOI based photonic crystals for far IR applications
844
Modeling of SOI FET for RF switch applications
845
Modeling of SOI-based MRR by coupled mode theory using lateral coupling configuration
846
Modeling of soil roughness using terrestrial laser scanner for soil moisture retrieval
847
Modeling of SOI-LDMOS Transistor Including Impact Ionization, Snapback, and Self-Heating
848
Modeling of soiled photovoltaic modules with neural networks using particle size composition of soil
849
Modeling of SOI-MOS capacitors C-V behavior: partially- and fully-depleted cases
850
Modeling of solar collectors and photovoltaic systems integrated with building assets
851
Modeling of Solar Flare Plasma and Its Radiation
852
Modeling of solder joint failure due to PCB bending during drop impact
853
Modeling of Soldering Quality by Using Artificial Neural Networks
854
Modeling of solenoidal transformer for the calculation of leakage inductance using eddy-current reaction field
855
Modeling of solid conductors in 2-D transient finite element analysis and its application to electric machines
856
Modeling of solid conductors in two-dimensional transient finite-element analysis and its application to electric machines
857
Modeling of solid electrolyte based on ceria for intermediate temperature fuel cells
858
Modeling of solid oxide fuel cells (SOFCs): An overview
859
Modeling of Solid Rotor Turbogenerators Part I: Theory and Techniques
860
Modeling of Solid Rotor Turbogenerators Part II: Example of Model Derivation and Use in Digital Simulation
861
Modeling of solidification of ZM5 shell and optimization of casting parameters
862
Modeling of solitary pulmonary nodules in PET/CT images using Monte Carlo methods
863
Modeling of some coplanar waveguide discontinuities
864
Modeling of some coplanar waveguide discontinuities
865
Modeling of some spatio-temporal aspects of visual information processing in the retinal neural network
866
Modeling of sorption kinetics of Cs, Am and Pu to sediments of the Baltic Sea
867
Modeling of sound-structure interaction in a rectangular enclosure using finite element method
868
Modeling of space charge effects in intense electron beams using two and three dimensional Green´s functions
869
Modeling of Space Charge Effects in Intense Electron Beams Using Two and Three Dimensional Green´s Functions
870
Modeling Of Space Station Electric Power System With EMTP
871
Modeling of space-charge phenomena in multi-turn tracking
872
Modeling of Sparkbreakdown of Short Non-Uniform Air Gaps
873
Modeling of Spatial Dependence in Wind Power Forecast Uncertainty
874
Modeling of spatial dynamics in vertical-cavity surface-emitting laser arrays
875
Modeling of Spatially Cross-Correlated Shadow Fading in Distributed Radio Access Networks
876
Modeling of spatially periodic dielectric sensors in the presence of a top ground plane bounding the test dielectric
877
Modeling of spatially periodic dielectric sensors in the presence of a top ground plane bounding the test dielectric
878
Modeling of Spatially-Dispersive Wire Media: Transport Representation, Comparison With Natural Materials, and Additional Boundary Conditions
879
Modeling of Speaking Rate Influences on Mandarin Speech Prosody and Its Application to Speaking Rate-controlled TTS
880
Modeling of spectral broadening in second-harmonic generation
881
Modeling of speech signals using an optimal neural network structure based on the PMDL principle
882
Modeling of speech signals using fractional calculus
883
Modeling of Spherical Magnet Arrays Using the Magnetic Charge Model
884
Modeling of spherical torus plasmas for liquid lithium wall experiments
885
Modeling of spinal cord and investigation of the injury mechanism during compression
886
Modeling of spin-based silicon technology
887
Modeling of spin-dependent transport in ferromagnet/insulator/ferromagnet structures
888
Modeling of spiral and meander lines in multilayer passive integration
889
Modeling of spiral inductors on lossy substrates for RFIC applications
890
Modeling of spiral inductors on lossy substrates for RFIC applications
891
Modeling of spiral inductors using artificial neural network
892
Modeling of split capacitor based dstatcom & voltage balancing scheme for load compensation
893
Modeling of split traffic under probabilistic routing
894
Modeling of split-core transformers for power transmissions
895
Modeling of split-phase machines in Park´s coordinates. Part I: Theoretical foundations
896
Modeling of split-phase machines in Park´s coordinates. Part II: Equivalent circuit representation
897
Modeling of spoken dialogue control for improvement of dialogue efficiency
898
Modeling of spoken dialogue with and without visual information
899
Modeling of spontaneous emission from erbium incorporated silicon nanocrystal
900
Modeling of spread-spectrum clock generation system using simulink
901
Modeling of Spring Constant and Pull-down Voltage of Non uniform RF MEMS Cantilever
902
Modeling of Spurious Coupling Between Modes in Metal Packages and Embedded Circuits
903
Modeling of SQS propagation induced by alpha ray in gas counters
904
Modeling of SQS propagation induced by alpha rays in gas counters
905
Modeling of squirrel cage induction motor a view to detecting broken rotor bars faults
906
Modeling of SRAM Standby Current by Three-Parameter Lognormal Distribution
907
Modeling of SRM Based on XS-LSSVR Optimized by GDS
908
Modeling of SSN noise using time domain impedance analysis and PSO optimization Algorithm
909
Modeling of SSSC in harmonic domain
910
Modeling of SSSC with EMTP RV
911
Modeling of stable and unstable second order systems with time delay
912
Modeling of stacked packaging thermal performance in module/system environment
913
Modeling of stacked-coil inductor from silicon integrated passive device technology
914
Modeling of stalled motor loads for power system short-term voltage stability analysis
915
Modeling of standalone and networked ATM switches (N-AtmSim) using discrete event simulation with TCP/IP sockets
916
Modeling of stand-alone variable speed diesel generator using doubly-fed induction generator
917
Modeling of standards-based commercial off the shelf (SCOTS) products for use in DoD environments
918
Modeling of Starter/Generator Based on Three-stage Brushless Synchronous Machines
919
Modeling of start-up and shut-down power trajectories of thermal units
920
Modeling of STATCOM and UPFC for power system steady state operation and control
921
Modeling of STATCOM under different loading conditions
922
Modeling of state machines in VHDL for encapsulation of DNP3 protocol in P2P ZigBee network
923
Modeling of static and dynamic behaviour of 2.9THz Quantum Cascade Lasers
924
Modeling of static characteristics of resonant-tunneling structures
925
Modeling of static magnetic anomaly created by iron plates
926
Modeling of static synchronous series compensator in Newton power flow calculation in PSASP
927
Modeling of static VAR´s compensators in fast decoupled load flow
928
Modeling of Static, Switched, and RF Fields in the Body for MRI
929
Modeling of statistical low-frequency noise of deep-submicrometer MOSFETs
930
Modeling of stator teeth-tip iron losses in fractional-slot concentrated winding surface PM machines
931
Modeling of STDR system for locating faults in live aircraft wires
932
Modeling of steady-state optical phenomena in transistors and diodes
933
Modeling of steam distillation pot with ARX model
934
MOdeling Of Steam Distillation System Using Hammerstein-Wiener model
935
Modeling of steering system of high speed intelligent vehicle by system identification
936
Modeling of Stepped-Impedance Slot Antenna
937
Modeling of step-up dc-dc converters to formulate design guidelines for optimization
938
Modeling of Stick-Slip Dynamic Behavior by Cellular Automata
939
Modeling of STI-induced stress phenomena in CMOS 90nm Flash technology
940
Modeling of stimulated Brillouin scattering in optical fibers with arbitrary radial index profile
941
Modeling of stochastic BTI in small area devices and its impact on SRAM performance
942
Modeling of stochastic processes in gyrotrons
943
Modeling of Stock Markets with Mean Reversion
944
Modeling of Strained CMOS on Disposable SiGe Dots: Strain Impacts on Devices´ Electrical Characteristics
945
Modeling of strained quantum-well lasers with spin-orbit coupling
946
Modeling of stratified graphene-dielectric structures using the generalized boundary conditions: THz wave scattering by a thin sandwiched disk
947
Modeling of stratosphere airship
948
Modeling of Stratospheric Airship During Takeoff
949
Modeling of straw lignin molecule
950
Modeling of Streamer Propagation in Transformer Oil-Based Nanofluids
951
Modeling of stress dependent hysteresis nonlinearity based on fuzzy tree for GMA
952
Modeling of stress effects in silicon oxidation
953
Modeling of stress effects on magnetic hysteresis and Barkhausen emission using an integrated hysteretic-stochastic model
954
Modeling of stress evolution of electroplated Cu films during self-annealing
955
Modeling of stress relief materials used in HV rotating machines
956
Modeling of stress-dependent wet etch characteristic for P-SOG STI process
957
Modeling of stress-effects in silicon oxidation including the non-linear viscosity of oxide
958
Modeling of stress-enhancement at defects inside cable insulation
959
Modeling of stress-induced leakage current in thin gate oxides
960
Modeling of Stress-induced Regulatory Cascades Involving Transcription Factor Dimers
961
Modeling of stress-retarded orientation-dependent oxidation: shape engineering of silicon nanowire channels
962
Modeling of Stress-Retarded Thermal Oxidation of Nonplanar Silicon Structures for Realization of Nanoscale Devices
963
Modeling of stretching process about carbon fiber
964
Modeling of Striated Filaments Occurring in a Nonthermal RF Plasma Jet at Atmospheric Pressure
965
Modeling of striplines between a power and a ground plane
966
Modeling of strongly coupled dusty plasmas
967
Modeling of structure of composite material with fiber components
968
Modeling of structures and characteristics in MOS made of ion implantation technological processes
969
Modeling of structures in 3D double-diffusive convection
970
Modeling of structures with curved boundaries: applied to the determination of band structures in photonic crystals
971
Modeling of STT-MTJ for low power embedded memory applications: A comparative review
972
Modeling of student and learning object interactions toward ubiquitous learning environment
973
Modeling of subband image data for buffer control
974
Modeling of subharmonics and chaos in DC motor drives
975
Modeling of submerged membrane bioreactor filtration process using NARX-ANFIS model
976
Modeling of submicron trackwidth inductive write head designs
977
Modeling of submillimetric magnetron on the first positive space harmonic of Π-mode oscilastions
978
Modeling of Subnanosecond Discharge in Hydrocarbon Liquid
979
Modeling of subsonic cavity flows by neural networks
980
Modeling of Substation Shielding Against Direct Lightning Strikes
981
Modeling of substrate contacts in TSV-based 3D ICs
982
Modeling of substrate coupling noise in lightly doped mixed-signal ICs
983
Modeling of substrate current in p-MOSFET´s
984
Modeling of substrate effects inducing non-ideal collector current at low bias
985
Modeling of substrate integrated waveguide series fed dielectric resonator antenna array with longitudinal slots excitation
986
Modeling of substrate noise block properties for early prediction
987
Modeling of substrate noise coupling for nMOS transistors in heavily doped substrates
988
Modeling of Substrate Noise Effects in Dynamic CMOS Circuits
989
Modeling of Substrate Noise Generation, Isolation, and Impact for an LC-VCO and a Digital Modem on a Lightly-Doped Substrate
990
Modeling of substrate noise in monolithic integrated circuits
991
Modeling of substrate noise injected by digital libraries
992
Modeling of substrate related extrinsic oxide failure distributions
993
Modeling of superconducting first- and second-order low-pass sigma-delta modulators
994
Modeling of supercritical ethane extraction by artificial neural networks
995
Modeling of supercritical fluid extraction by artificial neural networks
996
Modeling of supercritical fluid extraction by hybrid Peng-Robinson equation of state and genetic algorithms
997
Modeling of supercritical fluid extraction using an integrated soft computing and conventional approach
998
Modeling of Superheated Steam Temperature using Sparse Least Squares Support Vector Networks
999
Modeling of Suppliers´ Learning Behaviors in an Electricity Market Environment
1000
Modeling of supply chain with variation of inventory systems at nodes