بر اساس عنوان

1
Design of adiabatic connections for ultra-low-loss waveguides
2
Design of Adiabatic Dynamic Differential Logic for DPA-Resistant Secure Integrated Circuits
3
Design of adiabatic matching stages for efficient light coupling to propagating modes of photonic crystals
4
Design of adiabatic multi-port register file
5
Design of adiabatic sequential circuits using power-gating technique
6
Design of adiabatic spot-size converter lasers
7
Design of Adiabatic SRAM Based on CTGAL Circuit
8
Design of adiabatic tapers produced by controlled core diffusion
9
Design of adiabatic TSV, SWCNT TSV, and Air-Gap Coaxial TSV
10
Design of adjustable blade wind turbine for constant generated power
11
Design of adjustable compliant mechanism for service robot
12
Design of adjustable constant-force forceps for robot-assisted surgical manipulation
13
Design of Adjustable Homogeneous Region Cryofree Conduction-Cooled Superconducting Magnet for Gyrotron
14
Design of adjustable pulse module with FPGA-based 0.1ns resolution
15
Design of adjustable speed switched reluctance motor drives
16
Design of adjusting-free AC intelligent instrument
17
Design of ADPLL for both large lock-in range and good tracking performance
18
Design of ADPLL for good phase and frequency tracking performance
19
Design of ADPLL system for WiMAX applications in 40-nm CMOS
20
Design of ADSP-BF548 fatigue driving detection system based on eye features
21
Design of ADTR-DSSS-IR-UWB Transmitter for BPSK Modulation
22
Design of advanced active and autonomous learning system for computing education — A3 learning system
23
Design of Advanced Control Room
24
Design of advanced digital magnetic recording systems
25
Design of advanced feedback control system for electric power generation
26
Design of Advanced Front-lighting control unit and Hardware-in-the-Loop simulation
27
Design of advanced HF receiver multicoupler for shipboard applications
28
Design of advanced leg module for humanoid robotics project of METI
29
Design of advanced neuroscience platform
30
Design of Advanced Remote Sensing Data Processing Grid Service
31
Design of advanced SAD computational algorithm by using RAVR
32
Design of advanced time-frequency mutual information measures for aerospace diagnostics and prognostics
33
Design of advanced ultrasonic transducers for welding devices
34
Design of advanced underwater robotic vehicle and graphic workstation
35
Design of Advanced Voltage Management System Including Manual Operation Mode via Real-Time Digital Simulator
36
Design of advanced voltage management system including manual operation mode via real-time simulation
37
Design of aerial dispersal miniature detection robotic system
38
Design of aerodynamics missile controller based on adaptive fuzzy PID
39
Design of AES S-box using combinational logic optimization
40
Design of AFE and PWM Drive for Lithium-Ion Battery Management System for HEV/EV System
41
Design of affective interface for realizing human-machine empathy
42
Design of affective robot-assisted activity for children with autism spectrum disorders
43
Design of Affine Controllers via Convex Optimization
44
Design of Affordable Greenhouses for East Africa
45
Design of AGC amplifier for CMOS Image Sensor
46
Design of AGC and primary frequency regulation monitoring and management system
47
Design of agent framework using aspect oriented approach
48
Design of Agent Service System to Manage Services among Heterogeneous Multi-agent Systems
49
Design of Agent-based Collaborative Design Platform for Intelligent CAD
50
Design of agent-based flexible multimedia system
51
Design of agent-oriented pattern templates
52
Design of Agile Infrastructure for Manufacturing System with FNN Based Web-Enabled Technology Solutions
53
Design of Agricultural Aircraft with Audio Anti-bird
54
Design of Agricultural Equipment Cab based on virtual reality
55
Design of Agricultural Independent Power Supply System Which Complemented Each Other by Wind and Light
56
Design of agricultural information acquisition system for Xinjiang´ oasis based on ZigBee technology
57
Design of air bearing system for fine motion application of multi-DOF spherical actuators
58
Design of Air Compressor Monitoring System Based on Modbus Protocol
59
Design of Air Compressor Speed Control System Based on the Technology of Frequency Conversion
60
Design of Air Data System of an Aircraft Integrated Electronic Standby Instrument
61
Design of Air Pollution Monitoring System Using ZigBee Networks for Ubiquitous-City
62
Design of Air Quality Remote Sensing Monitoring System and Parallel Dense Dark Vegetation Algorithm
63
Design of Air Tracking Servo System Based on STM32F103
64
Design of airborne adaptive recursive MTI filter for detecting targets of slow speed
65
Design of airborne electrical load management center with high reliability based on dissimilar redundant technique
66
Design of airborne encoder decoder using powerpc - [Not available for publication]
67
Design of air-conditioning control system in university gymnasium based on virtual instrument technology
68
Design of aircraft Air Data acquisition and control simulating system
69
Design of aircraft cable intelligent fault diagnosis and location system based on time domain reflection
70
Design of Aircraft On-Glass Antennas Using a Coupled Feed Structure
71
Design of Aircraft Power Subsystem Simulation Exciter
72
Design of aircraft space indexed guidance along an airstream
73
Design of air-filled rectangular waveguide bandpass filters by DBFILTER code for terahertz applications
74
Design of airflow aperture arrays in shielding enclosures
75
Design of air-gapped magnetic-core inductors for superimposed direct and alternating currents
76
Design of airport service automation system
77
Design of airport video aided surveillance system based on DSP+FPGA
78
Design of airport workflow control system
79
Design of air-water heat pump Modeling operating conditions of the heat pump in a specific building
80
Design of Al pad geometry for reducing current crowding effect in flip-chip solder joint using finite-element analysis
81
Design of Al/ZnO/Si one-port SAW resonator filter
82
Design of Alarm Management System in Hybrid IP/Optical Networks
83
Design of AlAs-oxidized VCSELs with stable fundamental mode operation
84
Design of algebraic cyclic codes
85
Design of algebraic-geometric codes over fading channels
86
Design of algorithm for assignment of MSE theses evaluation
87
Design of algorithm for vehicle identification by number plate recognition
88
Design of algorithm of inverse viewing transformation with using multistage correlation analysis of stereoimage
89
Design of Algorithm-Based Fault Tolerant Systems with In-System Checks
90
Design of algorithm-based fault-tolerant multiprocessor systems for concurrent error detection and fault diagnosis
91
Design of algorithm-based fault-tolerant VLSI array processor
92
Design of Algorithms for Satellite Slew Manoeuver by Flatness and Collocation
93
Design of algorithms for spatial-time reduction complexity of dynamic programming
94
Design of algorithms for spatial-time reduction complexity of dynamic programming
95
Design of algorithms for video monitoring and state recognition system for complex equipments
96
Design of Algorithms of Working of Information About the State of Objects
97
Design of Algorithms to Extract Data from Capacitance Sensors to Measure Fastener Hole Profiles
98
Design of all channel ultra-stable FM discriminator
99
Design of all optical reversible logic gates
100
Design of all-accelerometer inertial measurement unit for tremor sensing in hand-held microsurgical instrument
101
Design of all-dielectric frequency selective surfaces using genetic algorithms combined with the finite element-boundary integral method
102
Design of all-magnetic guided-flux systems
103
Design of all-magnetic resistance-type logic circuits
104
Design of all-optical asymmetric Fabry-Pe´rot switch in a spin-polarization scheme
105
Design of All-Optical Contention Detection and Resolution for 40-Gb/s Label-Switched Routers
106
Design of all-optical gain-clamped discrete fiber Raman amplifiers
107
Design of all-optical gain-clamped lumped Raman fibre amplifier for optimal dynamic performance
108
Design of all-optical logic gates in polydiacetylene PTS-clad waveguides
109
Design of All-Optical Multi-functional Logic Gate in Single Format by Using Semiconductor Optical Amplifiers
110
Design of all-optical networks considering power consumption and four-wave mixing
111
Design of all-optical new gate using Mach-Zehnder interferometer
112
Design of all-optical nonlinear functionalities based on resonators
113
Design of all-optical NOT gate using SOA based Mach-Zehnder interferometer at 1.0Gb/s
114
Design of all-optical NRZ-OOK/RZ-QPSK modulation format converter by use of cross phase modulation in optical fiber
115
Design of All-Optical Reconfigurable Logic Unit With Bacteriorhodopsin Protein Coated Microcavity Switches
116
Design of all-optical switches based on carrier injection in Si/SiO/sub 2/ split-ridge waveguides (SRWs)
117
Design of all-optical XOR and AND logic gates based on multi-mode interference devices
118
Design of allpass filters for phase approximation and equalization using LSEE error criterion
119
Design of allpass filters with specified degrees of flatness and equiripple phase responses
120
Design of Allpass Fractional Delay Filter and Fractional Hilbert Transformer Using Closed-Form of Cepstral Coefficients
121
Design of allpass IIR digital filters using a minimax frequency response error method
122
Design of all-pass networks using Remez algorithm
123
Design of Allpass Variable Fractional Delay Filter
124
Design of Allpass Variable Fractional Delay Filter with Powers-of-Two Coefficients
125
Design of allpass-based non-uniform oversampled DFT filter banks
126
Design of all-passive higher-order CMOS N-path filters
127
Design of all-pole low-pass ladder filters using current-mode damped integrators
128
Design of All-Solid Bandgap Fiber With Improved Confinement and Bend Losses
129
Design of all-solid photonic-bandgap fibers for Raman-free propagation
130
Design of almost minimax FIR filters in one and two dimensions by WLS techniques
131
Design of Almost Symmetric Orthogonal Wavelet Filter Bank Via Direct Optimization
132
Design of alphabet shaped slot-loaded Dielectric Resonator Reflectarray Antenna at 12 GHz
133
Design of aluminum/polyimide stretchable interconnects investigated through in-situ testing
134
Design of AM modulation signal generator based on Matlab/DSP Builder
135
Design of AMBA APB bridge with reset controller for efficient power consumption
136
Design of AMBA™ wrappers for multiple-clock operations
137
Design of Ambulatory ECG Monitoring System to detect ST pattern change
138
Design Of Amplified Transoceanic Systems By Numerical Simulation
139
Design of amplifier- and modulator-integrated laser diode for 10-Gb/s 80-km transmission
140
Design of amplifier with rail-to-rail CMR with 1 V power supply
141
Design of amplifier with ultra-low ground current
142
Design of amplifiers by the computer addition of active and passive components
143
Design of amplifiers with high gain accuracy and high linearity
144
Design of Amplify and Forward MIMO Relay Networks with QoS Constraint
145
Design of amplify-and-forward relaying schemes for layered relay networks
146
Design of AM-TCM schemes for the impulse noise environment
147
Design of an H∞ optimal controller by using DGKF´s state-space formulas
148
Design of an X-band transformer-coupled amplifier with improved stability and layout
149
Design of an 10 kVA–45 A automatic static transfer switch module
150
Design of an 11 kW power factor correction and 10 kW ZVS DC/DC converter for a high-efficiency battery charger in electric vehicles
151
Design of an 11Gb/s CMOS Demultiplexer Using Redundant Multi-Valued Logic
152
Design of an 128-point FFT processor for OFDM applications
153
Design of an 18-T Canted Cosine–Theta Superconducting Dipole Magnet
154
Design of an 8 bit general purpose microcontroller with sea-of-gates design style
155
Design of an 8 MW Water-Cooled Magnet for a 35 T Hybrid Magnet at theHFLSM
156
Design of an 8–40 GHz antenna for the wideband instrument for snow measurements (WISM)
157
Design of an 8:1 MUX at 1.7 Gbit/s in 0.8 μm CMOS technology
158
Design of an 80kV, 40A resonant switch mode power supply for pulsed power applications
159
Design of an 80-MHz RFQ linac for heavy ions
160
Design of an 80V-class high-side capable double-resurf JI L-IGBT
161
Design of an 8192-bit RSA cryptoprocessor based on systolic architecture
162
Design of an 850-MHz klystrode
163
Design of an 874 GHz biasable sub-harmonic mixer based on MMIC membrane planar schottky diodes
164
Design of an 89 GHz radome
165
Design of an 8-bit 100 KSPS 1 mW CMOS A/D converter for digital mobile communication
166
Design of an 8-bit neuron MOSFET A/D converter using subranging method
167
Design of an 8-bit pipelined ADC with lower than 0.5 LSB DNL and INL without calibration
168
Design of an 8-element planar composite right/left-handed leaky wave antenna array for 2-D beam steering
169
Design of an 8-element switched mode circular antenna array for vehicular direction finding
170
Design of an 8-GeV Accumulator Ring for the Fermilab Tevatron I Project
171
Design of an 8Gsps, 65nm CMOS wideband flash ADC
172
Design of an 8-MJ integrated launch package
173
Design of an 8-MJ integrated launch package
174
Design of an 8-wide superscalar RISC microprocessor with simultaneous multithreading
175
Design of an 8-wide superscalar RISC microprocessor with simultaneous multithreading
176
Design of an 99%-efficient, 5kW, phase-shift PWM DC-DC converter for telecom applications
177
Design of an 9m dual-offset reflector antenna for S-Band weather RADAR applications
178
Design of an A/D converter using complementary three-input amplifiers
179
Design of an absorber with high impedance surfaces
180
Design of an absorbing mounting plate for a low reflection level
181
Design of an absorptive structure for WCDMA band
182
Design of an academic microcontroller and its application to Authenticated Encryption
183
Design of an accelerated aging test for polymer insulated distribution cables
184
Design of an accelerating cavity for the Superconducting Super Collider Low-Energy Booster
185
Design of an Acceleration Measurement System
186
Design of an acceleration rate controller for a linear drive of a vertical transportation system
187
Design of an accelerator-rich architecture by integrating multiple heterogeneous coarse grain reconfigurable arrays over a network-on-chip
188
Design of an access control module for an instrumentation gateway
189
Design of an access control module for an instrumentation gateway
190
Design of an access mechanism for a high speed distributed wireless LAN
191
Design of an Accumulator for a General Purpose Computer
192
Design of an accurate min-max current selector
193
Design of an Accurate Near Infrared Optical Tracking System in Surgical Navigation
194
Design of an accurate sampled-data simulator using field-effect transistors
195
Design of an accurate simulator for sampled-data systems
196
Design of an Accurately Regulated Multiple Output ZVS DC/DC Converter
197
Design of an AC-DC and DC-DC interleaved PWM controller for switching power supply
198
Design of an AC-dipole for use in RHIC
199
Design of an achievable, all lattice-matched multijunction solar cell using InGaAlAsSb
200
Design Of An Acoustic Doppler Current Profiler Test Unit
201
Design of an Acoustic Target Classification System Based on Small-Aperture Microphone Array
202
Design of an Acoustic Transmitter for Temperature-Pressure Dual Sensing in Injection Molding
203
Design of an Acoustic-Homing Autonomous Surface Vessel
204
Design of an acquisition system for bioelectric signals (heart) using an embedded system in FPGA platform
205
Design of an action interface with networking ability for rehabilitation
206
Design of an active array filtenna for radar applications
207
Design of an active differential mode current filter for a boost power factor correction AC-DC converter
208
Design of an active distributed RC lowpass filter using exponential lines
209
Design of an active distributed RC lowpass network
210
Design of an active dual-mode antenna with near hemispherical Field of View coverage
211
Design of an Active Fault Tolerant Control and Polytopic Unknown Input Observer for Systems described by a Multi-Model Representation
212
Design of an active Fault Tolerant Control based on the fuzzy bilinear observer for nonlinear systems
213
Design of an active fault tolerant control for nonlinear systems described by a multi-model representation
214
Design of an active forwarding scheme for ISDN3
215
Design of an active front end for a Modular Double-Cascade converter
216
Design of an Active Intrusion Monitor System
217
Design of an Active Linear Guide by Piezoelectric Actuators
218
Design of an active load for electronic welding machines
219
Design of an active locating manipulator for Vascular Interventional Surgery
220
Design of an active magnetic wheel with a varying Electro-Permanent Magnet adhesion mechanism
221
Design of an active memory system for network applications
222
Design of an active microstrip array using a microwave circuit simulator
223
Design of an active polyphase filter in GSM receiver with low-IF topologies
224
Design of an active power factor converter for ups with backup proton exchange membrane fuel cell/battery
225
Design of an active queue management algorithm based fuzzy logic decision
226
Design of an active radio frequency powered multi-hop wireless sensor network
227
Design of an Active Set Top Box in a Wireless Network for Scalable Streaming Services
228
Design of an active suspension system based on a biological model
229
Design of an active vibration control system for isolation of an optical bench
230
Design of an active vibration isolation control system using constrained optimization
231
Design of an active-inductor dual-loop frequency synthesizer
232
Design of an active-inductor-based termination circuit for high-speed I/O
233
Design of an Active-RC Bandpass Filter for a Subsampling RF Delta Modulator
234
Design of an AC-to-DC converter based on a flyback converter with active input current shaper
235
Design of an actuated phantom to mimic the motion of cardiac landmarks for the study of image-guided intracardiac interventions
236
Design of an actuating system using Inverse bond graph methodology: Application of FEM to a tow-links flexible manipulator
237
Design of an Actuator Being Both a Permanent Magnet Synchronous Motor and a Magnetic Suspension
238
Design of an actuator being both a permanent magnet synchronous motor and a magnetic suspension
239
Design Of An Actuator Being Both A Permanent Magnet Synchronous Motor And A Magnetic Suspension
240
Design of an actuator for the fast and high accuracy Wire Scanner
241
Design of an Adapter Service for Web Application Transition
242
Design of an adaptive accelerometer-based handwriting recognition system based on metacognitive framework
243
Design of an adaptive antenna array for tracking the source of maximum power and its application to CDMA mobile communications
244
Design of an Adaptive Antenna Array Test-Bed based on Software Radio for Tracking LEO Satellites
245
Design of an adaptive cache coherence protocol for large scale multiprocessors
246
Design of an adaptive calibration technique based on LSSVM for liquid level measurement
247
Design of an adaptive coding and retransmission strategy for a multipath fading channel
248
Design of an Adaptive Communication System for Implementation on Board a Future Algerian LEO Satellite
249
Design of an adaptive compressor and pulse-shaper for attosecond XUV pulses
250
Design of an adaptive configuration management architecture for tactical battlefield networks
251
Design of an adaptive control system for a hybrid electric vehicle
252
Design of an adaptive controller for a 2-DOF MEMS vibratory gyroscope to obtain perfect tracking and angular velocity estimation with noise, disturbance and parameter variation analysis
253
Design of an adaptive controller for a DC motor within an existing PLC framework
254
Design of an adaptive controller for level process for variation in temperature using multi-sensor data fusion
255
Design of an Adaptive Controller for Microcomputer Implementation
256
Design of an Adaptive Cruise Control / Collision Avoidance with lane change support for vehicle autonomous driving
257
Design of an adaptive curriculum portfolio recommendation system by learning object similarity evaluation and group decision modeling
258
Design of an adaptive drug delivery control system
259
Design of an adaptive dynamic sliding mode controller for uncertain anti-ship missiles
260
Design of an adaptive electronic starter for fluorescent lamps
261
Design of an adaptive FIR filter using symmetric neural networks
262
Design of an adaptive flow control algorithm for ATM networks
263
Design of an Adaptive Framework for Utility-Based Optimization of Scientific Applications in the Cloud
264
Design of an adaptive fuzzy logic controller
265
Design of an adaptive fuzzy logic controller for traffic signals
266
Design of an adaptive fuzzy neural network controller for a kind of the chaotic systems
267
Design of an adaptive fuzzy sliding mode controller for non-linear hysteretic systems
268
Design of an adaptive fuzzy sliding mode controller for uncertain anti-ship missiles
269
Design of an Adaptive Fuzzy-Bias SMC and Validation for a Rugged Electrohydraulic System
270
Design of an adaptive gait trajectory controller based on a hybrid two-legged robot model
271
Design of an adaptive Genetic Algorithm for maximizing and minimizing throughput in a computer network
272
Design of an adaptive human visual filter
273
Design of an adaptive interference reduction system for nerve-cuff electrode recording
274
Design of an adaptive interval type-2 fuzzy logic controller for the position control of a servo system with an intelligent sensor
275
Design of an adaptive Kalman equalizer and its performance over fading multipath channels
276
Design of an adaptive Kalman filter for fault detection of Networked Control Systems
277
Design of an adaptive linearizing control for induction motors
278
Design of an adaptive maximum likelihood estimator for key parameters in macroscopic traffic flow model based on expectation maximum algorithm
279
Design of an adaptive middleware based on the Universal Middleware Bridge for the heterogeneous home networks
280
Design of an Adaptive MIMO System using Linear Dispersion Code
281
Design of an adaptive motors controller based on fuzzy logic using behavioural synthesis
282
Design of an adaptive multimedia system based on QoS management
283
Design of an adaptive neural kinematic controller for a National Instrument mobile robot system
284
Design of an Adaptive Neurofuzzy Inference Control System for the Unified Power-Flow Controller
285
Design of an adaptive nonlinear controller-based optimal control theory for a voltage source induction motor drive system
286
Design of an adaptive nonlinear PID controller for nonholonomic mobile robot based on posture identifier
287
Design of an adaptive on-load de-icing scheme for overhead power transmission line
288
Design of an Adaptive Passive Collision Warning System for UAVs
289
Design of an adaptive PD controller with dynamic friction compensation for direct-drive SCARA robot
290
Design of an adaptive PI rate controller for streaming media traffic based on gain and phase margins
291
Design of an adaptive power system stabilizer
292
Design of an adaptive power system stabilizer using recurrent neural networks
293
Design of an adaptive predictive controller for steam generators
294
Design of an adaptive protection system for microgrids with distributed energy resources in accordance with IEC 61850-7-420
295
Design of an Adaptive PSS Based on Recurrent Adaptive Control Theory
296
Design of an Adaptive Receiver for OFDM Systems Using Conjugate Transmission
297
Design of an Adaptive Scanning Optical Microscope for Simultaneous Large Field of View and High Resolution
298
Design of an adaptive security mechanism for modern routers
299
Design of an adaptive shock absorber of landing gear and preliminary analysis on taxiing performance
300
Design of an adaptive sliding mode controller for a novel spherical rolling robot
301
Design of an adaptive Smart Card with in-lab experiments
302
Design of an adaptive speed controller for DC brushless motors
303
Design of an adaptive stepping sliding mode controller for uncertain anti-ship missiles
304
Design of an adaptive streaming system in ubiquitous environment
305
Design of an adaptive tension/velocity controller for winding processes
306
Design of an adaptive variable-structure voltage regulator using artificial neural network
307
Design of an adaptive velocity controller for a programmable four wheel vehicle
308
Design of an Adaptive Wideband Beamforming Algorithm for Conformal Arrays
309
Design of an Additional Extraction/Injection Area for the Fermilab Booster
310
Design of an adjustable bias circuit using a single-sided CMOS supply for avalanche photodiodes
311
Design of an Adjustable High Output Voltage Asymmetrically Switched Class D Converter
312
Design of an adjustable, low voltage, low dropout regulator
313
Design of an adjustable-way set-associative cache
314
Design of an admittance control with inner robust position control for a robot-assisted rehabilitation system RehabRoby
315
Design of an ADRC-based electronic throttle controller
316
Design of an advanced Acoustic Tide Gauge for Tsunami monitoring
317
Design of an Advanced Architecture CMOS/SOS Microprocessor
318
Design of an advanced AUV for deployment close to the seabed and other hazards
319
Design of an advanced binary decision machine for on/off industrial control
320
Design of an advanced computer writing tool
321
Design of an Advanced Flight Planning System
322
Design of an advanced high power density 1U intelligent rectifier
323
Design of an advanced modular automated evaluation system for experimental high power SGTOs
324
Design of an advanced modular automated evaluation system for experimental high power Si and SiC SGTOs
325
Design of an advanced prototype robot for white asparagus harvesting
326
Design of an advanced readout chip for silicon strip detectors
327
Design of an advanced readout chip for silicon strip detectors
328
Design of an advanced signal conditioning unit for sensor with reduced off-the-shelf components
329
Design of an advanced telemetry mission using CanSat
330
Design of An Advanced Time Delay Measurement and A Smart Adaptive Unequal Interval Grey Predictor for Real-Time Nonlinear Control Systems
331
Design of an Advanced Time-Domain Diffuse Optical Tomography System
332
Design of an advanced tool guiding system for robotic surgery
333
Design of an advanced wearable sensor platform for multi applications
334
Design of an aerodynamic stability and de-orbiting system for cubesats
335
Design of an aeroplane ejection seat ATE system
336
Design of an aerostatic imprint head with off-plane alignment functionality for nanoimprint lithography
337
Design of an agent cluster as integrative environment of personal agents
338
Design of an agent-based simulator for real-time estimation of power consumption/generation in residential buildings
339
Design of an agile frequency synthesizer for UWB communications
340
Design of an agile manufacturing workcell for light mechanical applications
341
Design of an agile radionavigation system using SDR techniques
342
Design of an agonist-antagonist active knee prosthesis
343
Design of an agricultural runoff monitoring and reward system for the upper Chesapeake Bay
344
Design of an air-air negotiation protocol to reorder aircraft arrivals sequence
345
Design of an air-alternating anti-decubitus wheelchair seating system
346
Design of an Airbag Deployment Algorithm Based on Precrash Information
347
Design of an Airborne Three-Dimensional Separation Assistance Display
348
Design of an airborne three-dimensional separation assistance display
349
Design of an air-core linear generator drive for energy harvest applications
350
Design of an Air-Core Reversed Field Pinch
351
Design of an aircraft power-type circuit breaker for 600 F ambient
352
Design of an airport surface routing evaluation tool
353
Design of an airport surface routing evaluation tool
354
Design of an alert scheme using RF technology for ensuring safety of individuals in wireless Ad-hoc Network
355
Design of an algorithm for detecting, Identifying and Locating Faults on Inhomogeneous Distribution Feeders
356
Design of an algorithm for the reconstruction of 3-D seismic images from compressed data
357
Design of an Algorithmic State Machine Controlled, Field Programmable Gate Array Based 16-bit Microprocessor
358
Design of an algorithmic Wallace multiplier using high speed counters
359
Design of an Alignment Tolerant Miniature Optical Subassembly Module
360
Design of an all digital direct-sequence spread-spectrum receiver
361
Design of an all solid state numeric display using LSI read only memory
362
Design of an all-attitude north-finder
363
Design of an All-Dielectric Self-Supporting cable System
364
Design of an All-Digital Impact Monitoring System for Large-Scale Composite Structures
365
Design of an All-Digital LVDS Driver
366
Design of an all-digital receiver for narrowband continuous-phase asynchronous CDMA systems
367
Design of an All-Digital Transmitter Architecture via Binary Sequence Search and a Look-Up Table Approach to Modulation
368
Design of an all-digital variable length ring oscillator (VLRO) for clock synthesis
369
Design of an All-Magnetic Computing System: Part I-Circuit Design
370
Design of an All-Magnetic Computing System: Part II-Logical Design
371
Design of an all-metal reflectarray antenna for Ku-band DTV applications
372
Design of an all-optical wavelength router based on spatial solitons
373
Design of an All-SiC Parallel DC/DC Weinberg Converter Unit Using RF Control
374
Design of an All-SiC Radio-frequency Controlled Parallel DC-DC Converter Unit
375
Design of an alpha-beta filter by combining fuzzy logic with evolutionary methods
376
Design of an alternating-phase fed single-layer slotted waveguide array for a sector shaped beam
377
Design of an alternative Drive-Test setup for SNMP-based equipments in broadband wireless networks
378
Design of an alternative ML timing recovery estimator for BPSK using interpolation
379
Design of an alternator voltage regulator immune to EMI
380
Design of an AM/FM Transistorized Receiver
381
Design of an Ambulatory Sleep Apnea Recorder
382
Design of an AMC plane for a unidirectional, low-profile tulip-loop antenna
383
Design of an AMC with Little Sensitivity to Angle of Incidence Using an Optimized Jerusalem Cross FSS
384
Design of an amplitude-stable sine-wave oscillator
385
Design of an analog 8-bit two-channel I/O ASIC for disk drive control applications
386
Design of an analog CMOS self-learning MLP chip
387
Design of an analog correlator for 22-29GHz UWB vehicular radar system using improved high gain multiplier architecture
388
Design of an analog DFE for disk-drive applications
389
Design of an Analog Electronic Interface for a Power Line Based Telephony System
390
Design of an analog field programmable RC oscillator using a floating gate PFET
391
Design of an analog frontend for a 5.8 GHz RFID transponder
392
Design of an analog fuzzy logic controller for a PWM boost converter
393
Design of an analog I/O ASIC for baseband conversion in digital mobile radio applications
394
Design of an analog optical link with low noise figure
395
Design of an analog output buffer for Active Matrix displays using low-temperature polycrystalline silicon thin-film transistors
396
Design of an Analog Quasi-Steady-State Nonlinear Current-Mode Controller for Single-Phase Active Power Filter
397
Design of an analog ranking system using optical intensity comparison smart-pixels with programmable intensity offset levels
398
Design of an analog/digital truly random number generator
399
Design of an Analogiser for optically digitised Radio-over-Fibre signals
400
Design of an analogue ASIC using subthreshold CMOS transistors to model biological neurons
401
Design of an analogue position control system of a motorized valve
402
Design of an analogue subthreshold multiplier suitable for implementing an artificial neural network
403
Design of an analytic constrained predictive controller using neural networks
404
Design of an anatomy information system
405
Design of an android based input device for electric vehicles
406
Design of an angled ultrasonic transducer for blood flow measurement applications
407
Design of an angular radial robotic stingray
408
Design of an anisotropic quarter-wave polariser without insertion loss caused by mismatch
409
Design of an ankle-knee joint system of a humanoid robot with a linear electro-hydrostatic actuator driven parallel ankle mechanism and redundant biarticular actuators
410
Design of an annual dielectric loaded cylindrical dielectric resonator Antenna for broadband monopole-type radiation
411
Design of an annular ring Ferry-assisted topology for Wireless Sensor Networks
412
Design of an annular slot for microwave dielectric measurements
413
Design of an annular-ring microstrip antenna for circular polarization
414
Design of an antagonistically counter-balancing parallel mechanism
415
Design of an antenna array for a passive mm-wave imager
416
Design of an antenna array for a wideband receiving system
417
Design of an antenna for an ingestible capsule endoscope system
418
Design of an antenna subsystem for a semi active radar target
419
Design of an anthropomorphic finger using shape memory alloy springs
420
Design of an anthropomorphic intensity modulated radiation therapy quality assurance phantom
421
Design of an anthropomorphic lower extremity exoskeleton with compatible joints
422
Design of an anthropomorphic prosthetic hand driven by Shape Memory Alloy actuators
423
Design of an anthropomorphic robot head for studying autonomous development and learning
424
Design of an anthropomorphic robotic finger system with biomimetic artificial joints
425
Design of an anthropomorphic robotic hand for power grip posture using SolidWorks
426
Design of An anthropomorphic tendon-driven robotic finger
427
Design of an anti-contamination insulator profile by using a computer program
428
Design of an anti-counterfeiting system based on SMS
429
Design of an anti-theft vehicle tracking system with a smartphone application
430
Design of an aperture coupled frequency selective surface
431
Design of an aperture-coupled microstrip antenna using a hybrid neural network
432
Design of an apparatus for optical and VUV spectroscopy of explosive emission processes
433
Design of an apparatus mimicking in vivo coronary cardiovascular dynamics inducing electrochemical fretting of a stent
434
Design of an Application Cooperation Fair Congestion Control Mechanism
435
Design of an Application Model Based on Vertical Search Engine
436
Design of an application programming interface for IP network monitoring
437
Design of an application specific instruction set processor for parametric speech synthesis
438
Design of an application specific VLSI chip for image rotation
439
Design of an application-cooperative management system for wireless sensor networks
440
Design of an application-specific instruction set processor for high-throughput and scalable FFT
441
Design of an application-specific PLD architecture
442
Design of an applicator for microwave-assisted bituminous surface thermal bonding
443
Design of an AQM for routers supporting TCP flows by means of Lyapunov theory
444
Design of an AR marker for cylindrical surface
445
Design of an Archimedean spiral antenna
446
Design of an Archimedean spiral UHF antenna for pulse monitoring application
447
Design of an Architecture for "An E-Tutor for Music\´
448
Design of an architecture for a MIDI based music e-tutor
449
Design of an architecture for multiple security levels in wireless sensor networks
450
Design of an architecture for multiprocessor system-on-chip (MPSoC)
451
Design of an arch-shaped FSPM Generator for the Seaquest Concept
452
Design of an Arduino based low-cost error generator for PROFIBUS DP
453
Design of an arduino-based smart car
454
Design of an Area Efficient High-Speed Color FDWT Processor
455
Design of an area efficient Reed-Solomon decoder ASIC chip
456
Design of an area-efficient CMOS multiple-valued current comparator circuit
457
Design of an Area-Efficient Multiplierless Processing Element For Fast Two Dimensional Image Convolution
458
Design of an Area-Efficient One-Dimensional Median Filter
459
Design of an argumentation-based negotiation support system
460
Design of an arithmetic element for serial processing in an iterative structure
461
Design of an arm exoskeleton with scapula motion for shoulder rehabilitation
462
Design of an Arm with Double Actuators for High Speed and High Accuracy Manipulation
463
Design of an ARM9-based embedded industrial personal computer system
464
Design of an armband type contact-free space input device for human-machine interface
465
Design of an ARM-based power meter having WIFI wireless communication module
466
Design of an array antenna for a UHF compact range
467
Design of an array based on an antipodal balanced Vivaldi antenna
468
Design of an array configuration for 2-D synthetic aperture radiometers using multi-objective optimization
469
Design of an array feed offset parabolic reflector antenna for a simple portable earth station
470
Design of an array of printed-dipoles proximity-coupled to a perpendicular microstripline
471
Design of an array processing unit for an array processor
472
Design of an array processor for parallel skeletonization of images
473
Design of an array with modified ultra-wideband Quasi-Yagi antennas
474
Design of an artificial arm with hand gripper for telemedicine system
475
Design of an artificial high flexion knee
476
Design of an artificial immune system as a novel anomaly detector for combating financial fraud in the retail sector
477
Design of an artificial intelligence controller for effective control of engine speed and pump flow according to working condition of an excavator
478
Design of an artificial intelligent system to generate 2D map of unknown environment
479
Design of an artificial mark to determine 3D pose by monocular vision
480
Design of an artificial muscle actuated finger towards biomimetic prosthetic hands
481
Design of an artificial muscle continuum robot
482
Design of an artificial pancreas using zone model predictive control with a Moving Horizon State Estimator
483
Design of an artificial-neural-network-based application-oriented grid resource discovery service
484
Design of an a-Si:H Interface Circuit for Liquid Crystal Chemical and Biological Sensor Array
485
Design of an ASIC architecture for high speed fractal image compression
486
Design of an ASIC for digital audio signal level meters
487
Design of an ASIC for fast signal recognition and code acquisition in DS-SS-CDMA receivers
488
Design of an ASIC for straight line detection in an image
489
Design of an ASIC for the ATM layer functions
490
Design of an ASIC to implement a new data transfer protocol for high energy physics
491
Design of an ASIC with CMOS 1.5 μ ES2 technology for emergency lighting systems with fluorescent lamp
492
Design of an ASIP architecture for low-level visual elaborations
493
Design of an ASIP IDEA crypto processor
494
Design of an ASIP LDPC Decoder Compliant with Digital Communication Standards
495
Design of an ASIP processor for MD5 hash algorithm
496
Design of an A-SMGCS prototype at Barajas airport: airport surveillance sensors bias estimation
497
Design of an A-SMGCS prototype at Barajas airport: available information and architecture
498
Design of an A-SMGCS prototype at Barajas airport: data fusion algorithms
499
Design of an Aspect-Based Framework to Improve the Dynamic Management of RFID Middleware
500
Design of an aspect-supported generic modeling tool
501
Design of an assembly planning system using unsupervised learning algorithm
502
Design of an assistance robot for patients suffering from Paraplegia
503
Design of an Assisted GPS Receiver and its Performance Analysis
504
Design of an Assisting Agent Using a Dynamic Ontology
505
Design of an Assistive Communication Glove Using Combined Sensory Channels
506
Design of an assistive eating utensil for an individual with arthrogryposis multiplex congenital
507
Design of an Associative Memory
508
Design of an associative processor array
509
Design of an asymmetric multilevel shunt active power filter
510
Design of an asymmetrical dual-band WLAN filter in liquid crystal polymer (LCP) system-on-package technology
511
Design of an asymptotically stabilizing controller for networked 2-dimensional linear discrete feedback control systems
512
Design of an asynchronous ACS for Viterbi decoder
513
Design of an asynchronous digital system with B-ternary logic
514
Design of an Asynchronous Microprocessor Using RSFQ-AT
515
Design of an asynchronous pipelined processor
516
Design of an asynchronous ring bus architecture for multi-core systems
517
DESIGN OF AN ASYNCHRONOUS WAVELENGTH-TIME OPTICAL CDMA TESTBED
518
Design of an ATM-based access segment for third generation mobile systems
519
Design of an attention detection system on the Zynq-7000 SoC
520
Design of an Attitude Stabilization Electromagnetic module for detumbling uncooperative targets
521
Design of an Audio Logic Tester
522
Design of an augmented generalized cube network
523
Design of an Augmented Reality Application Framework to Mobile Device
524
Design of an augmented telerobotic stereo vision system and associated security concerns
525
Design of an authoring tool for producing user-adaptive educational material
526
Design of an auto-braking regulator for a small wind generator
527
Design of an auto-deployable technology demonstration solar concentrator
528
Design of an autoland controller for a carrier-based F-14 aircraft using H∞ output-feedback synthesis
529
Design of an automated algorithm for labeling the cardiac blood pool in gated SPECT images of radiolabeled red blood cells
530
Design of an automated data entry system for hand-filled forms
531
Design of an automated dispenser unit
532
Design of an automated EMC test facility
533
Design of an Automated Essay Grading (AEG) system in Indian context
534
Design of an automated fish marking machine
535
Design of an Automated Handling System for Limp, Flexible Sheet Lasagna Pasta
536
Design of an automated highway systems steering actuator control system
537
Design of an automated inspection system for large scale convex surfaces
538
Design of an automated record integration system for a programming exercise class
539
Design of an automated system for detection and classification of power quality disturbances
540
Design of an automated test bed for experimental Si and SiC SGTO devices
541
Design of an automated transportation system in a seaport container terminal for the reliability of operating robots
542
Design of an automatic annotation framework for corporate Web content
543
Design of an Automatic Cartoon Movie Builder (ACMB) System for Generation of a Cartoon Movie from a Given Story
544
Design of an Automatic Control System for Coal Preparation Process
545
Design of an automatic error correction system of tobacco sorter’s high-speed belt conveyor
546
Design of an automatic impedance matching system for industrial continuous microwave ovens. Part I: modeling and off line tuning
547
Design of an automatic impedance matching system for industrial continuous microwave ovens. Part II: experimental results
548
Design of an Automatic Intercept Switch
549
Design of an automatic lead inspection system: an integrated application of machine vision and robotics
550
Design of an automatic meter reading system [electricity metering]
551
Design of an Automatic Ontology Construction Mechanism Using Semantic Analysis of the Documents
552
Design of an automatic scan tracking system for a D-2 digital recorder
553
Design of an automatic sensitivity control for a new subscriber´s telephone set: the British Post Office 700-type telephone
554
Design of an automatic steering controller for bus revenue service based on drivers´ steering mechanism
555
Design of an automatic step intention detection system for a hybrid gait orthosis
556
Design of an automatic synchronizer for connecting Induction Motors as Generators in mini-grid systems
557
Design of an Automatic Target Recognation algorithm
558
Design of an Automatic Target Recognition algorithm on the IBM Cell Broadband Engine
559
Design of an automatic test station for field testing of radar units - roland application
560
Design of an Automatic Test System with VXI Bus
561
Design of an automatic testing for FPGAs
562
Design of an automatic voice controlled system and remote control
563
Design of an Automatic Wood Types Classification System by Using Fluorescence Spectra
564
Design of an Automatic Workflow Modeling Method in Cooperative WFMS
565
Design of an automation system for preforming processes in aerospace industries
566
Design of an Automobile Simulator Driving Control Based on Single Chip Computer
567
Design of an automobile wheel alignment measuring system based on Position Sensitive Detector
568
Design of an automotive 48 V integrated starter-generator on the basis of an induction machine with concentrated windings
569
Design of an automotive safety system using Controller Area Network
570
Design of an automotive traffic sign recognition system targeting a multi-core SoC implementation
571
Design of an Autonomic Element for Server Management
572
Design of an Autonomic QoE Reasoner for Improving Access Network Performance
573
Design of an autonomic services oriented architecture
574
Design of an autonomous amphibious robot for surf zone operation: part i mechanical design for multi-mode mobility
575
Design of an autonomous amphibious robot for surf zone operations: part II - hardware, control implementation and simulation
576
Design Of An Autonomous And Distributed Robot System: Actress
577
Design of an autonomous biomicrorobot
578
Design of an Autonomous Jumping Microrobot
579
Design of an autonomous lawn mower with optimal route planning
580
Design of an autonomous micro robot
581
Design of an autonomous mobile olfactory robot for chemical source localization
582
Design of an autonomous mobile robot for hospital
583
Design of an autonomous navigation system
584
Design of an autonomous platform for distributed sensing-actuating systems
585
Design of an autonomous remote cellular network service tester
586
Design of an autonomous software platform for future symbiotic service management
587
Design of an autonomous surface vehicle (ASV)
588
Design of an Autonomous Surface Vehicle Used for Marine Environment Monitoring
589
Design of an autonomous swimming miniature robot based on a novel concept of magnetic actuation
590
Design of an autonomous under-ice exploration system
591
Design of an autonomous unmanned aircraft flight path controller
592
Design of an Autopilot for Cessna 182
593
Design of an auto-removing mechanism based on a PLC control system
594
Design of an Auxiliary Converter for the Diode Rectifier and the Analysis of the Circulating Current
595
Design of an Auxiliary Converter for the Diode Rectifier and the Analysis of the Circulating Current
596
Design of an auxiliary power distribution network for an electric vehicle
597
Design of an Average-Current-Mode Noninverting Buck–Boost DC–DC Converter With Reduced Switching and Conduction Losses
598
Design of an Axial Flux Inductor Type Synchronous Motor With the Liquid Nitrogen Cooled Field and Armature HTS Windings
599
Design of an Axial Flux Permanent Magnet Generator for a Portable Hand Crank Generating System
600
Design of an axial flux permanent magnet machine for automotive energy efficiency competition
601
Design of an axial flux permanent magnet wind power generator
602
Design of an Axial-Flux Interior Permanent-Magnet Synchronous Motor for Automotive Application: Performance Comparison with Electric Motors Used in EVs and HEVs
603
Design of an axial-flux type permanent-magnet generator
604
Design of an axially displaced ellipsoid reflector antenna for a 4.6m diameter ship-borne transportable terminal at S-band
605
Design of an axially telescoping wing control system based on servo motor
606
Design of an axisymmetric permanent magnet structure for magnetic resonance tomography
607
Design of an BLDC drive with iron core to improve the efficiency of Ventricular Assist Devices
608
Design of an DFE equalizer ASIC chip using the MMA algorithm
609
Design of an Directive Antenna for “Free-Flow” system application
610
Design of an dSPACE-based 3-phase SVPWM controller
611
Design of an E2PROM memory cell less than 100 square microns using 1 micron technology
612
Design of an Early Minicomputer
613
Design of an Early Response System using EGT-based overlay network
614
Design of an easy re-configurable remote laboratory
615
Design of an E-band high power amplifier for wireless high data rate communications
616
Design of an EBG Compact Low-Mass Antenna in C-band with dual circular polarisation
617
Design of an EBG structure by using a transmission line model
618
Design of an EBG-backed CPW-fed slot antenna
619
Design of an EBIS for RHIC
620
Design of an eccentric paddle locomotion mechanism for amphibious robots
621
Design of an ECG acquisition device for the nonlinear analysis of heart rate variability (HRV)
622
Design of an ech system for a small modular stellarator
623
Design of an ech system for a small modular stellarator
624
Design of an economical 3.8 GHz oscillator which gives low phase noise of −120 dBc/Hz at off-set frequency of 100 Hz–100 kHz
625
Design of an economical and technical distribution automation system
626
Design of an Economical Compact Broadband Waveguide Power Divider
627
Design of an economical compact combline filter
628
Design of an Economical Multidrop Network Topology with Capacity Constraints
629
Design of an economical SCARA robot for industrial applications
630
Design of an E-core flux-switching permanent magnet machine with large air-gap
631
Design of an ECRH system for JET
632
Design of an eddy current based crack detection sensor for wire processing applications
633
Design of an Eddy Current Brake System Using Microstructures
634
Design of an Eddy Current Detector
635
Design of an eddy-current brake for a sodium-cooled nuclear power reactor
636
Design of an eddy-current brake for a sodium-cooled reactor
637
Design of an eddy-current coupling for slip-synchronous permanent magnet wind generators
638
Design of an Edge-Coupled Dual-Ring Split-Ring Resonator
639
Design of an education cloud based on mainframe
640
Design of an educational emulation framework for mechatronics control unit development
641
Design of an Educational Oscilloscope: A hands-on learning tool
642
Design of an Educational Support System for Self-Learning
643
Design of an EEPROM in RFID tag: Employing mapped EPC and IPv6 address
644
Design of an effective learning method SQ3R based distance learning system
645
Design of an effective loss-distinguishable MAC protocol for 802.11 WLAN
646
Design of an effective QoS-aware mapping scheme using persistent allocation probing
647
Design of an efficiency optimization controller for inverter-fed AC induction motors
648
Design of an Efficiency-Enhanced Raman FEL Oscillator
649
Design of an Efficient & Minimal-Marginal Routing Algorithm in Networks
650
Design of an efficient 900 GHz antenna in standard CMOS technology for imaging arrays
651
Design of an efficient active noise cancellation circuit for in-ear headphones
652
Design of an efficient ambient WiFi energy harvesting system
653
Design of an Efficient Ancillary Services Market
654
Design of an efficient and practical algorithm for wavelength assignment in multi-wavelength ring transport networks
655
Design of an efficient and robust multimedia gateway for pervasive communication
656
Design of an Efficient Architecture for Enhancement of Stream Video Captured in Non-uniform Lighting Conditions
657
Design of an efficient architecture for real-time image enhancement based on a luma-dependent nonlinear approach
658
Design of an Efficient ASIC for the Control of Microwave Ovens
659
Design of an efficient authentication method for modern image and video
660
Design of an efficient CNTFET using optimum number of CNT in channel region for logic gate implementation
661
Design of an efficient contactless energy transfer system for battery charger
662
Design of an efficient CORDIC-based architecture for synchronization in OFDM
663
Design of an efficient digital down-converter for a SDR-based DVB-S receiver
664
Design of an efficient distributed GIS application
665
Design of an efficient distribution transformer based on an expert system and FE
666
Design of an efficient D-TV energy harvesting system for low-power applications
667
Design of an efficient DVB/MPEG transport stream remultiplexor
668
Design of an efficient dynamic time warping LSI
669
Design of an efficient dynamic voltage restorer for compensating voltage sags, swells, and phase jumps
670
Design of an efficient estimator of the tip position and orientation for non-linfar very flexible robotic arms
671
Design of an efficient FFT processor for DAB system
672
Design of an efficient FFT Processor for OFDM systems
673
Design of an efficient FPGA-based interference canceller structure using NLMS adaptive algorithm
674
Design of an efficient frame-based modeling and simulation tool
675
Design of an efficient fuel cell vehicle drivetrain, featuring a novel boost converter
676
Design of an efficient high-speed VLSI architecture for WLAN modem
677
Design of an efficient ID-based short designated verifier proxy signature scheme
678
Design of an efficient initial access authentication over MANET
679
Design of an efficient initialization method of a log-based file system with flash memory
680
Design of an Efficient Intelligent Instrument Fault Diagnosis Expert System
681
Design of an Efficient Intelligent Instrument Fault Diagnosis Expert System
682
Design of an efficient load balancing algorithm on distributed networks by employing symmetric balanced incomplete block design
683
Design of an Efficient Maximum Likelihood Soft Decoder for Systematic Short Block Codes
684
Design of an efficient memory subsystem for network processor
685
Design of an efficient memory-based DVB-T channel decoder
686
Design of an efficient mid-wave IR fiber optic light source
687
Design of an efficient miniaturized UHF planar antenna
688
Design of an efficient miniaturized UHF planar antenna
689
Design of an efficient multilevel inverter for a 1500V railway propulsion system applications
690
Design of an efficient NoC architecture using millimeter-wave wireless links
691
Design of an efficient OFDM burst synchronization scheme
692
Design of an efficient power delivery network in an soc to enable dynamic power management
693
Design of an efficient power distribution network for the UltraSPARC-I microprocessor
694
Design of an Efficient Quantum Circuit Simulator
695
Design of an efficient RAKE receiver architecture for multiuser detection with adaptive channel estimation
696
Design of an efficient scalable vector graphics player for constrained devices
697
Design of an Efficient Scheme for Data Migration in Chip-Multiprocessors
698
Design of an efficient shared memory architecture using hybrid opto-electronic VLSI circuits and space invariant optical buses
699
Design of an efficient starting circuit for LCI-fed synchronous motor drives
700
Design of an efficient tentative hold protocol for automated coordination of multi-business transactions
701
Design of an efficient unification processor
702
Design of an efficient uplink time alignment module for Long Term Evolution
703
Design of an efficient variable-length FFT processor
704
Design of an efficient VLSI architecture for 2-D discrete wavelet transforms
705
Design of an efficient VLSI inner-product processor for real-time DSP applications
706
Design of an efficient weighted random pattern generation system
707
Design of an Efficient X-Band Waveguide-Fed Microstrip Patch Array
708
Design of an efficient, low voltage, third harmonic, large-orbit gyrotron amplifier with a vane-resonator output cavity
709
Design of an eFuse OTP memory of 8 bits based on a 0.35µm BCD process
710
Design of an e-Health Respiration and Body Posture Monitoring System and Its Application for Rib Cage and Abdomen Synchrony Analysis
711
Design of an eight element edge slot waveguide array antenna
712
Design of an elastic mooring for remote turbidity monitoring buoys
713
Design of an e-Learning platform in the field of Innovation Management for engineers
714
Design of an Electric Differential System for Three-Wheeled Electric Welfare Vehicles With Driver-in-the-Loop Verification
715
Design of an electric field sensor for the direct measurement of SAR
716
Design of an Electric Machine Integrated with Trans-Rotary Magnetic Gear
717
Design of an electric motor controller with embedded dynamic thermal control logic for motorbike racing application
718
Design of an electric power interface compatibility 200 kVa mobile test facility
719
Design of an electric powertrain for a Ford F150 crew cab truck utilizing a lithium battery pack and an interior PM synchronous machine drive
720
Design of an electric series elastic actuated joint for robotic gait rehabilitation training
721
Design of an electric vehicle for the Maltese islands
722
Design of an electrical distribution test rig for validation of equipment for more electrical aircraft
723
Design of an electrical downtilt base station antenna
724
Design of an electrical motor with wide speed range for the in-wheel drive in a heavy duty off-road vehicle
725
Design of an electrical power assist kit for manual wheelchair under the conditions of developing countries
726
Design of an electrical stimulator and somatosensory evoked potentials (SEP)
727
Design of an electrical vehicle power train
728
Design of an Electrically Automated RF Transceiver Head Coil in MRI
729
Design of an electrically small and near-3D omnidirectional loop antenna for UHF band RFID tag
730
Design of an electrically small circularly polarised turnstile antenna and its application to near-field wireless power transfer
731
Design of an electrically small, circularly polarized planar cross dipole
732
Design of an Electrically Small, Circularly Polarized, Parasitic Array Antenna for an Active 433.92-MHz RFID Handheld Reader
733
Design of an electrically-injected hybrid silicon laser with resonant mirrors
734
Design of an electro pneumatic micro robot for in-pipe inspection
735
Design of an Electrochemical Impedance Test Cell with Servomechanically Adjustable Cell Constant
736
Design of an Electroencephalogram Module for Brain Computer Interface Oriented to People with Motor Disabilities
737
Design of an electrogoniometer based on accelerometers for the evaluation of sports gesture in weight lifting
738
Design of an electro-hydraulic multivariable control system teaching facility
739
Design of an electromagnetic accelerator for turbulent hydrodynamic mix studies
740
Design of an electromagnetic bandgap antenna
741
Design of an electromagnetic compatibility testing system used for onsite measurement
742
Design of an electromagnetic elliptical wiggler for ELETTRA
743
Design of an Electromagnetic Launcher for Earth-to-Orbit (ETO) microsatellite systems
744
Design of an electromechanical actuator used in a torpedo
745
Design of an electromechanical pump system for training in beating heart cardiac surgery
746
Design of an electromyographic mouse
747
Design of an electron gun for a 280 GHz induced-resonance-electron-cyclotron (IREC) maser experiment
748
Design of an electron gun using computer optimization
749
Design of an electron gun with FEA cathode for THz devices
750
Design of an electron optical system for a Ku-band multi-beam klystron (MBK)
751
Design of an Electron Optics System for a W -Band Sheet Beam Klystron
752
Design of an electron optics system for a G-band sheet beam klystron
753
Design of an Electronic Alcohol Nose Based on MSP430
754
Design of an electronic ballast based on a resonant converter controlled by a variable capacitance strategy
755
Design of an electronic charged particle spectrometer for measuring (/spl rho/R), yield, and implosion symmetry on the OMEGA Upgrade
756
Design of an electronic control system for overcurrent protection in a voltage regulator based on auto-transformer
757
Design of an electronic device for brain computer interface applications
758
Design of an electronic differential for a formula electric racecar
759
Design of an electronic frequency changer
760
Design of an Electronic Frequency Changer
761
Design of an electronic frequency changer (44–145)
762
Design of an electronic instrumentation virtual laboratory based on free-open resources
763
Design of an electronic oscillator for biosensing applications based on a MEMS resonator
764
Design of an electronic power transformer
765
Design of an electronic saccadic imaging system
766
Design of an electronic sunmaphore for measuring levels of solar radiation in the Bolivian: Altiplano: Oruro
767
Design of an electronic system for monitoring muscle activity in weight-lifting
768
Design of an electronic watch
769
Design of an electronically adaptable low-power reference cell for low-cost CMOS processes
770
Design of an Electronically Beam Scanning Reflectarray Using Aperture-Coupled Elements
771
Design of an electronically tunable microwave impedance transformer
772
Design of an electronically-steerable phased array for wireless power transmission using a magnetron directional amplifier
773
Design of an Electroocular Computing Interface
774
Design of an electrooptic light valve projection display
775
Design of an Electro-Optic Modulator Based on a Silicon-Plasmonic Hybrid Phase Shifter
776
Design of an electro-optical sampling experiment at the AWA facility
777
Design of an electrostatic 2-axis MEMS stage with large area platform for PSD
778
Design of an electrostatic energy separator for the ISIS RFQ test stand
779
Design of an electrostatic MEMS microgripper system integrated with force sensor
780
Design of an Electrostatic Repulsive-Force Based Vertical Micro Actuator
781
Design of an Elementary Level Surface Sweeping and Wiping Robot for Domestic Use
782
Design of an elevated CPW for high-speed digital circuit applications
783
Design of an ELF noise processor
784
Design of an elliptic curve cryptoprocessor using optimal normal basis over GF(2233)
785
Design of an elliptic filter in a microstrip configuration
786
Design of an elliptical neural network with application to degraded character classification
787
Design of an elliptical undulator and X-ray beam line at DSR of RIKEN RI beam factory project
788
Design of an embedded based control system for efficient sorting of waste plastics using Near Infrared Spectroscopy
789
Design of an embedded battery management system with passive balancing
790
Design of an embedded bi-planar coil-based integrated current sensor for power module integration
791
Design of an embedded CMOS CR SAR ADC for low power applications in bio-sensor SOC
792
Design of an embedded communication controller based on CAN and Ethernet for substation automation system
793
Design of an embedded control and acquisition system for industrial Local Area Networks based on ARM
794
Design of an Embedded Control System Laboratory Experiment
795
Design of an embedded data acquisition system for remote application
796
Design of an Embedded Device for Surface Roughness Measurement
797
Design of an embedded diversity antenna for UMTS/HSDPA-based data-card applications
798
Design of an embedded DSP system for a fuel cell inverter
799
Design of an Embedded Fingerprint Matcher System
800
Design of an embedded fully-depleted SOI SRAM
801
Design of an Embedded Health Monitoring Infrastructure for Accessing Multi-processor SoC Degradation
802
Design of an embedded image acquisition system
803
Design of an embedded microcomputer based mini quadrotor UAV
804
Design of an embedded monitor system with a low-power laser projection for the detection of a patient´s breath
805
Design of an embedded multi-function communications control system
806
Design of an embedded networking infrastructure for whole-body tactile sensing in humanoid robots
807
Design of an embedded on-chip debug support module of a MCU
808
Design of an embedded patient´s breath detection system by a double reflection from a low-power laser projection
809
Design of an embedded PID controller applied to blood pressure control
810
Design of an embedded receiver for satellite-based real time voice and data messaging for efficient disaster management
811
Design of an embedded RF signal generator for BIST application
812
Design of an embedded robot control sublanguage
813
Design of an embedded sensor network for application in energy monitoring of a sports stadium
814
Design of an embedded speech-centric interface for applications in handheld terminals
815
Design of an Embedded Streaming Media Server in video monitoring
816
Design of an Embedded System Based Low Cost Position Control System
817
Design of an embedded system with modified contrast limited adaptive histogram equalization technique for real-time image enhancement
818
Design of an embedded UWB hardware platform for navigation in GPS denied environments
819
Design of an embedded video compression system-a quantitative approach
820
Design of an embedded vision system for the Rubik´s cube robot
821
Design of an embedded-feed type microstrip patch antenna for UHF radio frequency identification tag on metallic objects
822
Design of an EMG signal recognition system for human-smartphone interface
823
Design of an EMI filter for static converters with off-line simplified measurements
824
Design of an emitter coupled transistor astable multivibrator
825
Design of an Emotional Search in an Existing Product Platform www.stylepark.com
826
Design of an Empirical Study for Comparing the Usability of Concurrent Programming Languages
827
Design of an emulation framework for evaluating large-scale open content aware networks
828
Design of an end-of-life Decision Support System using Product Embedded Information Device technology
829
Design of an endoluminal NOTES robotic system
830
Design of an endoscopic stitching device for surgical obesity treatment using a N.O.T.E.S approach
831
Design of an end-user data visualization system
832
Design of an energy balanced based routing protocol for WSN
833
Design of an energy distribution management system for the vertical management of volatile infeed
834
Design of an energy efficiency model and architecture for cloud management using prediction models
835
Design of an energy efficient motor for irrigation pumps operating under realistic conditions
836
Design of an energy efficient PV stand-alone power supply unit for a residential-based CubeSat ground station
837
Design of an energy efficient, high speed, low power full subtractor using GDI technique
838
Design of an energy harvesting conditioning unit for hearing aids
839
Design of an energy management scheme for a series-hybrid powertrain
840
Design of an energy management strategy for PEM Fuel Cell Vehicles
841
Design of an energy management system for an autonomous hybrid micro-grid based on Labview IDE
842
Design of an energy recovery system for a Gyrotron backward wave oscillator
843
Design of an Energy Recovery System for a Gyrotron Backward-Wave Oscillator
844
Design of an energy sharing dual-escalator system based on the dual active bridge converter
845
Design of an energy storage converter for microgrid applications
846
Design of an energy storage system in a multi-machine power system
847
Design of an energy-aware system-in-package for playing MP3 in wearable computing devices
848
Design of an energy-efficient 32-bit adder operating at subthreshold voltages in 45-nm CMOS
849
Design of an Energy-Efficient Asynchronous NoC and Its Optimization Tools for Heterogeneous SoCs
850
Design of an Energy-Efficient CMOS-Compatible NoC Architecture with Millimeter-Wave Wireless Interconnects
851
Design of an energy-efficient cross-layer protocol for mobile ad hoc networks
852
Design of an Energy-Efficient Distributed Multi-level Clustering Algorithm for Wireless Sensor Networks
853
Design of an energy-efficient routing protocol for a corona-based wireless sensor network
854
Design of an energy-efficient standalone distributed generation system employing renewable energy sources and smart grid technology as a student design project
855
Design of an energy-efficient turbo decoder for 3RD generation wireless applications
856
Design of an energy-saving routing protocol in wireless sensor networks
857
Design of an Engine Test Bench Based on Virtual Instrument Technology
858
Design of an Enhanced 10Gb/s Ethernet MAC Controller for DCB Offloading on FPGA
859
Design of an Enhanced ACC for Collision Detection and Prevention Using RTOS
860
Design of an enhanced adaptive hybrid controller for switched reluctance motors
861
Design of an enhanced bandwidth PIFA with modified shorting strip
862
Design of an enhanced energy conserving routing protocol based on route diversity in wireless sensor networks
863
Design of an Enhanced Fairness Algorithm for the IEEE 802.17 Resilient Packet Ring
864
Design of an enhanced FDDI-II system
865
Design of an enhanced FOD inspection system for the aircraft assembly process
866
Design of an Enhanced Handover Algorithm Based on a New Adaptive SR-ARQ for Next-Generation Mobile Communication Networks
867
Design of an enhanced hybrid fuzzy P+ID controller for a mechanical manipulator
868
Design of an enhanced MEIGA-MetNet dust micro-sensor able to perform gas sensing in Mars atmosphere
869
Design of an enhanced orbital prosthetic fabrication for effective exenterated eye socket restoration
870
Design of an enhanced patch array on a Reactive Impedance Substrate
871
Design of an Enhanced PKI for Ubiquitous Networks
872
Design of an enhanced RF energy harvesting system for wireless sensors
873
Design of an Enhanced Rule Based Focused Crawler
874
Design of an enterprise credit assessment system based on mixed expert systems
875
Design of an Enterprise Dynamic Performance Simulation and Analysis System
876
Design of an Enterprise-wide Physiological and Clinical Data Solution
877
Design of an entertainment robot with multimodal human-robot interactions
878
Design of an environment for physical phenomena simulation: application to visualization and animation of electrostatic field and potential
879
Design of an Environmental Education Material Based on Field Observations
880
Design of an EP-based neuro-fuzzy classification model
881
Design of an E-Procurement System Based on Business Intelligence Tools
882
Design of an equalizer using the DFE structure and the MMA algorithm
883
Design of an ergonomic three-finger haptic device for advanced robotic hands control
884
Design of an error control scheme for hard real-time communication on FDDI networks
885
Design of an Error Detection and Data Recovery Architecture for Motion Estimation Testing Applications
886
Design of an error-based robust adaptive controller
887
Design of an error-free perfect secrecy system for unknown inputs
888
Design of an Error-Tolerance Scheme for Discrete Wavelet Transform in JPEG 2000 Encoder
889
Design of an ESD-Protected Ultra-Wideband LNA in Nanoscale CMOS for Full-Band Mobile TV Tuners
890
Design of an evaluation system in e-learning Arabic language
891
Design of an Event-based architecture for the intra-vehicular context perception
892
Design of an event-based feedforward strategy for SOPTD processes
893
Design of an evolutionary controller and its application
894
Design of an evolutionary multi-objective optimization scheduling system for a screw manufacturer
895
Design of an exact data deduplication cluster
896
Design of an exact nonlinear controller for induction motors
897
Design of an exact nonlinear model follower for the control of large angle rotational maneuvers
898
Design of an Exception Handing Algorithm of Workflow
899
Design of an exoskeletal robot for human elbow motion support
900
Design of an exoskeletal robot for human shoulder motion support considering a center of rotation of the shoulder joint
901
Design of an exoskeleton as a finger-joint angular sensor
902
Design of an exoskeleton for index finger rehabilitation
903
Design of an exoskeleton with kinesthetic feedback: Lessons learned
904
Design of an expandable crossbar scheduler based on iSLIP algorithm
905
Design of an Expandable Website Platform for Quality Course Cluster
906
Design of an experimental facility to study convection in liquid lithium
907
Design of an experimental indoor position system based on RSSI
908
Design of an experimental methodology for generation of partial discharges signals
909
Design of an experimental platform for an X-by-wire car with four-wheel steering
910
Design of an experimental platform for process control systems
911
Design of an experimental system for cryogenic compact exchanger
912
Design of an Experimental System for Digital Circuit Fault Diagnosis Based on Support Vector Machine
913
Design of an experimental system for dual energy X-ray CT
914
Design of an experimental system for scanning EMG method to investigate alterations of motor units in neurological disorders
915
Design of an experimental test stand for francis type hydraulic turbines
916
Design of an experimental test stand for the study of liquid lithium film stability
917
Design of an expert system based on neural network ensembles for missile fault diagnosis
918
Design of an expert system for arrhythmia diagnosis
919
Design of an expert system for competence and performance management using Sanskrit computational linguistics
920
Design of an Expert System for Diagnosis of a Space Borne Battery Based Electric Power System
921
Design of an expert system for generating optimal assembly sequences
922
Design of an expert system for IT college course timetabling at the University of Bahrain by using a knowledge base process modeling
923
Design of an expert system for monitoring drug treatment in a psychiatric hospital
924
Design of an Expert System for Pulping Based on Fuzzy BP Network
925
Design of an expert system for transmission planning
926
Design of an expert system to automatically calibrate impedance control for powered knee prostheses
927
Design of an expert system to estimate cost in an automated jobshop manufacturing system
928
Design of an explicit constrained predictive sliding mode controller
929
Design of an expulsive de-icing system for avionic applications: Preliminary study and functional tests
930
Design of an extended architecture for degraded modes of operation of IVHS
931
Design of an Extended Architecture for Secure Low-Cost 900MHz UHF Mobile RFID Systems
932
Design of an Extended Architecture for Sharing DLNA Compliant Home Media from Outside the Home
933
Design of an Extended Floating-Point Multiply-Add-Fused Unit for Exploiting Instruction-Level Parallelism
934
Design of an Extended Kalman Filter for UAV Localization
935
Design of an extended Kalman filter frequency tracker
936
Design of an extended Kalman filter frequency tracker
937
Design of an extended LMS-type adaptive filter using semidefinite programming
938
Design of an extended luenberger observer for sensorless vector control of induction machines under regenerating mode
939
Design of an extended privacy homomorphism algorithm
940
Design of an extended robot game framework
941
Design of an extended TCP for preventing DOS attacks
942
Design of an extensible microkernel PKI server structure
943
Design of an extensible microvascular network information system
944
Design of an Extensible Network Testbed
945
Design of an extensible, portable and POSIX compliant protocol
946
Design of an Extremely Energy-Efficient Hardware Algorithm Using Adiabatic Superconductor Logic
947
Design of an extremely high performance counter mode AES reconfigurable processor
948
Design of an extremely wideband monopole antenna with triple notches
949
Design of an Extremely Wideband Planar Elliptical Metal Antenna
950
Design of an extremely wideband quasi-self-complementary pentagonal antenna with WLAN stop band
951
Design of an FBG based-on sensor device for large displacement deformation
952
Design of an FBG Sensor Network Based on Pareto Multi-Objective Optimization
953
Design of an FDB based Intra-domain Packet Traceback System
954
Design of an FFT/IFFT Processor for MIMO OFDM Systems
955
Design of an flexible e-learning system for employee´s education in manufacturing industry based on knowledge management
956
Design of an FMCW Radar Altimeter for Wide-Range and Low Measurement Error
957
Design of an fMRI Compatible System to Explore Neural Mechanisms Subserving VR Therapies
958
Design of an fMRI-compatible optical touch stripe based on frustrated total internal reflection
959
Design of an FMS operator workstation using the Rasmussen abstraction hierarchy
960
Design of an FP/EBG antenna with metamaterial PRS
961
Design of an FPGA based adaptive neural controller for intelligent robot navigation
962
Design of an FPGA based algorithm for real-time solutions of Statistics-Based Positioning
963
Design of an FPGA based intelligence traffic light controller with VHDL
964
Design of an FPGA based visible light communication system
965
Design of an FPGA Logic Element for Implementing Asynchronous NULL Convention Logic Circuits
966
Design of an FPGA-Based 3-Phase Sinusoidal PWM Controller
967
Design of an FPGA-Based 3-Phase SVPWM Controller
968
Design of an FPGA-Based Algorithm for Real-Time Solutions of Statistics-Based Positioning
969
Design of an FPGA-based eddy current instrument for the detection of corrosion pits
970
Design of an FPGA-based full-state feedback controller using high level synthesis tools
971
Design of an FPGA-based fuzzy sliding-mode controller for light tracking systems
972
Design of an FPGA-based high-speed filter-decimator for the GIFTS imaging interferometer
973
Design of an FPGA-based OFDM transceiver for DVB-T standard
974
Design of an FPGA-based OFDM-STBC transceiver for WiMAX 802.16e standard
975
Design of an FPGA-based Real-Time Simulator for electrical system
976
Design of an FPGA-Based RF Link for Data and Power Transfer
977
Design of an FPGA-based space vector PWM generator for three-phase voltage-sourced inverters
978
Design of an FSS-backed 20/30 GHz circularly polarized reflectarray for shared aperture X/Ka-band satellite applications
979
Design of an H.264 decoder with variable pipeline and smart bus arbiter
980
Design of an H∞ Based PI controller for AQM routers supporting TCP flows
981
Design of an H∞ controller for energy storage in a wind-diesel system
982
Design of an H∞ loop shaping velocity controller for a small unmanned helicopter
983
Design of an H∞-based preview controller
984
Design of an H∞-optimal FOPID controller using particle swarm optimization
985
Design of an H∞ controller with internal model principle for disturbance rejection in optical disk drives
986
Design of an H∞ robust controller for multi-module parallel DC-DC buck converters with average current mode control
987
Design of an H∞ robust controlled single-stage converter with high power factor and fast regulation
988
Design of an harmonic rejection system using integrated active inductors
989
Design of an HDTV codec for terrestrial transmission at 25 Mbit/s
990
Design of an HNM System for Prosodic Modification of Slovak Speech
991
Design of an H-plane horn array antenna using the complete 1D/3D-EBG waveguide in the THz band
992
Design of an H-shape cross slotted aperture-coupled microstrip patch antenna
993
Design of an I/O balancing file system on Web server clusters
994
Design of an I-band low phase noise oscillator using a new hair-pin resonator
995
Design of an Iceworthy Workboat for Alaskan Waters
996
Design of an IDM-based determinant computing unit for a 130nm low power CMOS ASIC acoustic localization processor
997
Design of an IDML-Based Interactive Agent Drama Authoring Tool
998
Design of an IEEE 802.15.3c baseband processor in FPGA
999
Design of an IGBT based electronic circuit breaker
1000
Design of an IGBT bridge converter for serial resonant load