بر اساس عنوان

1
The incremental voltage control mode for PWM regulators
2
The incremental-cost approach for synthesis of CCD 4-valued unary functions
3
The In-Crowd Algorithm for Fast Basis Pursuit Denoising
4
The incubation effects of the industrial cluster on entrepreneurs
5
The IncuLight: Solar-powered infant incubator
6
The indefinite immittance matrices of odd-terminal networks
7
The Indefinite Model Evaluation for Groundwater Quality
8
The indent reflow sealing (IRS) technique-a method for the fabrication of sealed cavities for MEMS devices
9
The indentation size effect in SnAgCu lead-free BGA solder joints at elevated temperatures
10
The indentification for reservoir fluid based on the autocovariance function and implementation by matlab
11
The independance of forward and backward estimation errors in the two-filter form of the fixed interval Kalman smoother
12
The Independence Assumption for a Series or Parallel System When Component Lifetimes Are Exponential
13
The Independence of Axioms of B. Russell´s Logical System of Axioms
14
The Independence of Fairness-Aware Classifiers
15
The Independence of Linear Approximations in Symmetric Cryptanalysis
16
The independent and principal component of graph spectra
17
The independent components of characters are `strokes´
18
The independent fixture for illumination of staircases of buildings
19
The independent steer-by-wire system of the omni-directional EV and its Fault-Response-System
20
The independent variable technique for sparse linear equations
21
The independent wavelet bandwidth allocation algorithm
22
The indeterminacies of measurements using pulses of coherent electromagnetic energy
23
The Indeterminacy of Measurements Performed by Radar Equipment
24
The Indeterministic Behavior of Scoped Memory in Real-Time Java*
25
The Index Coding problem: A game-theoretical perspective
26
The index entropy in mismatched lossy source coding
27
The index entropy of a mismatched codebook
28
The Index of Cognitive Activity: measuring cognitive workload
29
The index of refraction modulation effect on optical switching performance in Kerr-like nonlinear periodic multilayer stacks
30
The index of the standard circuit equations of passive RLCTG-networks does not exceed 2
31
The index organizations for RDF and RDF schema
32
The Index Poisoning Attack in P2P File Sharing Systems
33
The Index Selection of Body Composition Modeling
34
The Index System Construction of Preferential Evaluation for Investment and Financing Project on Rural Roads
35
The index system establishment of expressway quality control based on Hall theory
36
The index system optimization of graduation project based on reliability and validity analysis
37
The indexation monitoring of the civic scientific literacy construction capacity
38
The indexation study to evaluate fair development of Civic Scientific Literacy Construction in China
39
The indexing of persons in news sequences using audio-visual data
40
The index-permutation graph model for hierarchical interconnection networks
41
The index-profile characterization of fiber preforms and drawn fibers
42
The Indian 1 MW demonstration OTEC plant and the development activities
43
The Indian Banking Community Cloud
44
The Indian luminaire trick
45
The Indian medicine
46
The Indian power sector - a sustainable way forward
47
The Indian River Lagoon - Impacts from Spanish Conquistadors to Man in Space
48
The Indian solar pumping experience and commercialisation initiatives
49
The Indian Space Program
50
The Indiana Clinical Translational Sciences Institute HUB
51
The Indiana University Cooler injection synchrotron RF cavity
52
The Indiana University Cooler injector synchrotron RF system
53
The Indiana University Cyclotron Facility (IUCF) 1980
54
The Indiana University midwest Proton Radiation Institute
55
The Indicator Browser: A Web-Based Interface for Visualizing UrbanSim Simulation Results
56
The indicators and concept of self-determined learning platform
57
The indigenous remote sensing image processing system and its exertion strategy
58
The indirect adaptive fuzzy predictive control of hypersonic vehicle
59
The Indirect Binary n-Cube Microprocessor Array
60
The Indirect Keyboard Control System by Using the Gaze Tracing Based on Haar Classifier in OpenCV
61
The indirect measurement technology of shift comfort for automatic mechanical transmission
62
The indirect rate-distortion function of a binary i.i.d source
63
The indirect style under-actuated robotic finger with tendon-slider mechanisms
64
The indirectly heated thermistor as a precise a.c.-d.c. transfer device
65
The indispensability of dispensable indexes
66
The Indispensable Engineer
67
The Indispensable Man Is Only a Modern Myth
68
The indispensibility to each other of pure and applied science
69
The indium phosphide bare substrate: its influence on the epitaxy layer quality
70
The individual
71
The Individual Credit Evaluation Based on COLS-SVM
72
The Individual Inventor
73
The individual knowledge model supporting web-based instruction based on cloud computing
74
The individual secrecy capacity of degraded multi-receiver wiretap broadcast channels
75
The individual secrecy capacity of the Gaussian SISO and degraded Gaussian MIMO multi-receiver wiretap channel
76
The individual stability of student spatial deployment and its implications
77
The Individuality of Relatively Permanent Pigmented or Vascular Skin Marks (RPPVSM) in Independently and Uniformly Distributed Patterns
78
The individualized design of products
79
The Individual-Organization Fit between Organizational Culture and Individual Values as Predictor of Job Satisfaction and Organizational Commitment in a Italian Municipality: The Role of Human Resource Management in a Public Organization
80
The Indonesian Language speech synthesizer based on the Hidden Markov Model
81
The Indoor Environment of Passive Solar Heating in High Altitude Localities
82
The Indoor Farm
83
The indoor localization method based on the integration of RSSI and inertial sensor
84
The indoor positioning algorithm research based on improved location fingerprinting
85
The indoor positioning technique based on neural networks
86
The indoor power line channel model based on two-port network theory
87
The indoor radio channel at 5.2 GHz: prediction by means of ray tracing and measurements
88
The indoor radio propagation channel
89
The indoor real-time 3D localization algorithm using UWB
90
The indoor SLAM using multiple three dimension sensors integration
91
The indoor wireless location technology research based on WiFi
92
The indoor-outdoor radio environment
93
The Indo-US cooperative photovoltaic project
94
The induced correlations of Zadoff-Chu sequences
95
The induced current density calculation by charge simulation method for grounded and isolated man model exposed under 500 kV transmission line
96
The induced current in parallel wires over an imperfect ground from an incident EMP
97
The induced current on the cable in the IBDN caused by the lightning stroke to ground
98
The induced electromagnetic field associated with submerged moving bodies in an unstratified conducting fluid
99
The induced electromagnetic field associated with wakes-signal processing aspects
100
The induced magnetic dipole of a polarized sphere
101
The induced magnetic field calculation of three phase overhead transmission lines above a lossy ground as a frequency-dependent complex function
102
The induced MMF method
103
The induced overvoltage between UHV AC and DC transmission lines built on the same tower under fault conditions
104
The induced transport current investigation in aluminium stabilized superconductors
105
The induced voltage for conducting ring interaction with axially symmetric magnetic fields
106
The inducement analysis of facial expression recognition on person-dependent
107
The inducement analysis of local facial expression recognition
108
The Inducer rule induction workbench
109
The inducing of classification rules based on parallel ECL
110
The inductance analysis of the trapezoidally railed linear synchronous motor as compared to the Zig-Zag version for Maglev applications
111
The inductance and resistance of the laser discharge in a pulsed gas laser
112
The inductance calculation of magnetic rods by using complementary finite element methods
113
The inductance calculation of magnetic rods by using complementary finite element methods
114
The inductance coefficients of a part of a circuit, and their applications
115
The inductance coefficients of a salient-pole alternator in relation to the two-axis theory
116
The Inductance Computation for the Passive Compulsator
117
The Inductance Enhancement Study of Spiral Inductor Using Ni–AAO Nanocomposite Core
118
The inductance matrix of a multiconductor transmission line in multiple magnetic media
119
The inductance model of coupled high-Tc superconducting microstrip lines
120
The inductance of linear conductors of rectangular section
121
The inductance of planar structures
122
The inductance of wires and tubes
123
The inductance of wires and tubes
124
The Inductance Set Design in Wide Bandwidth Multiswitching Converters
125
The Inductance-Capacitance Oscillator as a Frequency Divider
126
The Inductances Ld and Lq of Reluctance Machines
127
The induction device for the electromagnetic processing of a liquid
128
The Induction Galvanometer, a Sensitive Instrument Converter
129
The induction heating of fossil fuels in-situ by electric and magnetic fields
130
The induction lamp, a new source of visible and ultra-violet radiation
131
The Induction Lamp, a New Source of Visible and Ultra-Violet Radiation
132
The induction machine handbook [Book Review]
133
The induction machine operation demonstrated by Arago´s disc
134
The induction machine with ring stator winding as a possible solution for speed regulation
135
The Induction Machine With Solid Iron Rotor [includes discussion]
136
The induction motor
137
The induction motor
138
The induction motor a versatile device
139
The Induction Motor and the Rotary Converter and their Relation to the Transmission System
140
The induction motor on unsteady loads
141
The induction motor parameter estimation through an adaptive genetic algorithm
142
The Induction Motor Parameter Estimation Using Genetic Algorithm
143
The induction motor start up with transient suppression
144
The induction motor´s historical past
145
The induction motor-a dynamic system
146
The induction motor-a state-of-the-ark technology?
147
The induction of current on conductors located in electrically large structures: some measured and calculated results
148
The Induction Range: Its Performance and Its Development Problems
149
The induction regulator
150
The induction regulator
151
The induction watt-hour meter
152
The Induction-FEL Design For The White Sands Missile Range
153
The induction-type frequency changer
154
The inductive connection effects of a mounted SPDT in a plastic SO8 package
155
The inductive connection effects of a mounted SPDT in a plastic SO8 package
156
The Inductive Coupling of the Magnets in MICE and its Effect on Quench Protection
157
The inductive effect of collector-to-base capacitance with α > 1
158
The inductive inverse kinematics algorithm using uniform posture map
159
The Inductive Power Transfer Story at the University of Auckland
160
The inductive quench propagation in a NbTi-magnet as the dominating effect for the transient current distribution in a NbTi-Nb3Sn hybrid magnet
161
The Inductive Transistor
162
The inductor as a transmission line
163
The inductor compass
164
The inductor compass
165
The inductosyn and its application
166
The Inductosyn Its uses and Applications to Machine Control
167
The Inductrack: a simpler approach to magnetic levitation
168
The inductronic electrodynamometer for the precise measurement of voltage, current, power, and energy
169
The indumor
170
The Industrial Affiliates Program at the University of Puerto Rico Mayaguez
171
The industrial and academic training of the professional production engineer
172
The Industrial and Commercial Power Systems Department [IAS History]
173
The industrial application of computer vision: a research group´s perspective
174
The industrial application of cylindrical grinding processes
175
The industrial application of phase current analysis to detect rotor winding faults in squirrel cage induction motors
176
The industrial application of simulation to solve transient electric motor drive problems using readily available data
177
The Industrial Application of the Electric Motor, as Illustrated in the Gary Plant of the Indiana Steel Company
178
The industrial application of the electric motor, as illustrated in the gary plant of the Indiana steel company
179
The industrial application of uniformly dispersing microwave and heating system
180
The Industrial Applications of Gas-Filled Triodes
181
The Industrial Automation and Control Committee [IAS History]
182
The Industrial Automation Institute
183
The Industrial Benefits of Mechatronics - Learning from the Japanese Experience
184
The industrial challenges of airborne AESA radars
185
The industrial culture necessary to exploit mechatronics
186
The industrial designer
187
The industrial designer
188
The industrial designer
189
The industrial designer
190
The industrial designer
191
The industrial desktop-real time business and process analysis to increase productivity in industrial plants
192
The industrial difference [Sector focus: software factories]
193
The Industrial Drives Committee
194
The Industrial Electrical Engineer´s Responsibilities and How They Reflect on Management
195
The Industrial Electronics Concept
196
The Industrial Electronics Society TC on Electrical Machines [Society News]
197
The Industrial Engineer´s Role in New Product Development
198
The Industrial Engineering Laboratory
199
The industrial engineering revolution
200
The industrial evolution of a fuzzy model based controller
201
The industrial fabrication of 3" optical grade LiTaO3 crystals
202
The industrial field bus
203
The industrial indoor channel: large-scale and temporal fading at 900, 2400, and 5200 MHz
204
The industrial internship program at UCSD bioengineering
205
The Industrial Lighting and Display Committee [IAS History]
206
The industrial need for adequate computer communications
207
The industrial performance aggregation: towards a definition
208
The Industrial Pollution Management Based on Cluster Analysis
209
The industrial power committee
210
The Industrial Power Conversion Systems Department [IAS History]
211
The industrial reality of fibre optics
212
The industrial relations act
213
The industrial relations bill and the chartered engineer
214
The industrial restructuring after the economic crisis in Ulsan: focusing on the regional innovation system
215
The industrial robot as intelligent tool carrier for human-robot interactive artwork
216
The Industrial Scientist as Citizen
217
The industrial services reference model
218
The Industrial Society And The Compapy Of The Future
219
The industrial story of the hat-fed reflector antenna for global microwave-link market
220
The industrial transition in Japan
221
The Industrial Tribunals Handbook: fighting your case at the industrial tribunals
222
The industrial use of formal methods: was Darwin right?
223
The industrial use of synchronous motors by central stations
224
The Industrial Use of Synchronous Motors by Central Stations
225
The industrial use of VDM++
226
The industrial uses of "terylene" polyester fibre
227
The Industrial Utilization of the Counter-Electromotive Force of Self Induction
228
The industrial work placement
229
The industrial/educational interface
230
The industrial/educational interface
231
The industrial/educational interface
232
The industrial/educational interface
233
The industrialization of fullerenes progresses on schedule in Japan [News from Japan]
234
The industrialization of mexico
235
The industrialization of the Silicon Photonics: Technology road map and applications
236
The industrialization of the Silicon Photonics: Technology road map and applications
237
The Industrialized Building System (IBS) Survey Report 2008--Educating the Malaysian Construction Industry
238
The Industry and General Applications Group---Where It Stands Today
239
The Industry Applications Society Annual Meeting Chicago, Illinios October 11-14, 1976
240
The Industry Applications Society Annual Meeting Cincinnati, Ohio September 28-October 3, 1980
241
The Industry Applications Society Annual Meeting Cleveland, Ohio September 30-October 4, 1979
242
The Industry Applications Society Annual Meeting Los Angeles, California October 2-6, 1977
243
The Industry Applications Society Annual Meeting Mexico City, Mexico October 3-7, 1983
244
The Industry Applications Society Annual Meeting Philadelphia, Pennsylvania October 5-9, 1981
245
The Industry Applications Society Annual Meeting San Francisco, California October 4-8, 1982
246
The Industry Applications Society Annual Meeting Toronto, Ontario, Canada October 1-5, 1978
247
The Industry Applications Society Annual Meeting: Atlanta, Georgia, September 28-October 2, 1975
248
The Industry Applications Society Annual Meeting: Milwaukee, Wisconsin October 8-11, 1973
249
The Industry Applications Society Annual Meeting: Philadelphia, Pennsylvania October 9-12, 1972
250
The Industry Applications Society Annual Meeting: Pittsburgh, Pennsylvania October 7-10, 1974
251
The industry applications society under the IEEE umbrella
252
The industry chain of mobile payment and its future development mode
253
The Industry Data Analysis Processing Model Design: The Regional Health Disease Trend Analysis Model
254
The industry demands better demand response
255
The industry evolution simulation model based on multi-agent theory
256
The industry in 1997: Only flexible makers of high-quality efficiently-produced cars will prosper in the fragmented marketplace of the late 20th century
257
The Industry in the 80´s
258
The Industry Information Oriented Construction and Operating of E-Exchange
259
The industry performance evaluation for western cities in China
260
The industry year attack
261
The Industry/EPRI Advanced Light Water Reactor Program
262
The industry´s approach to human factors (nuclear power)
263
The industry´s point of view
264
The Industry´s Premier U.S. Conference and Exposition Conference [front matter]
265
The industry-university intellectual property paradox
266
The industry-university-research collaboration of Chinese medium and small technological enterprises
267
The Ineffectiveness of Absorbing Coatings on Conducting Objects Illuminated by Long Wavelength Radar
268
The inefficiency of batch training for large training sets
269
The inequalities of quantum information theory
270
The inertaire transformer
271
The Inertaire Transformer
272
The inertaire transformer
273
The inertia test and trend partition for trend detection in sequential data
274
The inertia weight self-adapting in PSO
275
The inertial electrostatic confinement approach to fusion power
276
The Inertial Response of Induction-Machine-Based Wind Turbines
277
The inertial thermonuclear fusion is feasible owing to development of thin films technologies
278
The inertial thermonuclear fusion is feasible owing to development of thin films technologies
279
The inescapable smart impact detection system (ISIS): An ubiquitous and personalized fall detector based on a distributed “divide and conquer strategy”
280
The Inevitability of Teaching Online
281
The inevitability of the transition from a surveillance-society to a veillance-society: Moral and economic grounding for sousveillance
282
The Inevitable Cycle: Graphical Tools and Programming Paradigms
283
The inevitable energy revolution: Good, bad or catastrophic
284
The inevitable rise of NVM in computing
285
The Inevitable Stability of Software Change
286
The Inexact Newton Method with Semi Automatic Differentiation
287
The INF Treaty and prospects for strategic arms verification
288
The Infamous Ratio Measure
289
The infeasibility of a zero-current switching class-E amplifier
290
The infeasibility of constant output power in a constant-current-fed class E power inverter
291
The infeasibility of constant output power in a constant-current-fed class-E power inverter
292
The infeasibility of quantifying the reliability of life-critical real-time software
293
The infeasibility of self-regulating constant-current-fed class E power inverters
294
The Infeasible SIR Region Is Not a Convex Set
295
The infeasible SIR region is not a convex set
296
The Infection of Trade Policy to FDI Technology Spillover Effect -The empirical test on Bhagwati hypothesis base on the data of Chinese industries and regions
297
The inferelator 2.0: A scalable framework for reconstruction of dynamic regulatory network models
298
The inference error minimisation approach to fuzzy inference and knowledge analysis
299
The Inference of Link Loss Rates with Internal Monitors
300
The Inference of Regular LISP Programs from Examples
301
The inference problem for computer security
302
The Inference Process with Quality Evaluation in Healthcare Environments
303
The Inference Search Process for Managing Control Points Using OWL and SWRL
304
The Inference Strategy of Concrete Crack In Expert System
305
The inference validity problem in legal discovery
306
The inference via DNA computing
307
The Inferential predictive control method of coal mill
308
The infiltration of legal education to engineering education and self innovation
309
The infimal closed controllable superlanguage and its application in supervisory control
310
The infimal controllable and N-observable superpredicate of a given predicate
311
The Infimum principle
312
The infimum principle
313
The infinitary logic of sparse random graphs
314
The infinite archive
315
The Infinite Dimensional Control of Flexible Cantilevers in AFM Based Nanomanipulation
316
The infinite distance in the determination of the nearest Euclidean M-neighbours in the K-D-B tree
317
The infinite Hidden Markov random field model
318
The Infinite Hidden Markov Random Field Model
319
The Infinite Hidden Markov Random Field Model Based on Student´s t-Distribution
320
The infinite horizon open-loop Nash LQ-game
321
The Infinite-Dimensional Continuous Time Kalman - Yakubovich - Popov Inequality
322
The Infinite-Message Limit of Two-Terminal Interactive Source Coding
323
The Infinite-Order Conditional Random Field Model for Sequential Data Modeling
324
The Infinity Project brings DSP brains to robots in the classroom
325
The Infinity Project: building a high school curriculum which emphasizes the engineering, math, and science principles of modern technology
326
The INFINITY Project: digital signal processing and digital music in high school engineering education
327
The INFINITY Project: expanding signal-processing-based engineering education to the high school classroom
328
The in-fixture calibration procedure line-network-network-LNN
329
The inflexible fickleness of fashion
330
The influence “heating-cooling” process rate on temperature hysteresis of ferroelectric capasitor structures
331
The influence analysis of geometry errors on the contact characteristics of ball screw mechanism
332
The influence analysis of resistance change to efficiency-optimization control for ipmsms used in electric vehicle
333
The Influence Analysis of the Injection Concentration on the Energy Storage in Brackish Aquifers under the Model of Groundwater Flow, Heat Transferring and Solute Movement
334
The influence analysis of water content for the accuracy of practical split-window algorithm
335
The influence analysis that disk shearing machine parameter setting and quality of the side shearing
336
The influence and control measures of distributed photovoltaic generation on the voltage in distribution system
337
The influence and countermeasure to transformer differential protection of CT saturation caused by external fault removal
338
The Influence and Design Consideration of UPS Output Virtual Resistance on Parallel-Connected UPS System
339
The Influence and Elimination of Algorithm´s Initial Value in Passive Location
340
The influence and modeling of process variation and device mismatch for analog/rf circuit design
341
The influence and respond of public finance construction on the urban investment and financing
342
The influence between two players in game with graph restricted communication and a priori unions
343
The influence by temperature and product density to accuracy of magnetostrictive level gauge
344
The influence by trapezoidal conductor shapes on ring-resonator based material characterization up to 110 GHz
345
The influence discipline of temperature of high viscosity fluid jetting
346
The Influence Effect Analyses of the Information Technology on Labor Market in China
347
The influence estimation of aging factor in MV cable using Weibull distribution and Neural Networks
348
The influence examination of dielectric parameters on bandwidth in multilayer aperture-coupled microstrip antennas with utilization the FDTD method.
349
The influence factor analysis for preterm neonates via grey entropy
350
The influence factor analysis of energy consumption on all electric range of electric city bus in China
351
The influence factor research of information services supply in rural areas — Based on factor analysis
352
The influence factor research of information services supply in rural areas —based on factor analysis
353
The influence factors analysis on the steering performances of liquid crystal optical phased array
354
The influence factors and optimization methods of the local oscillator power for coherent doppler lidar
355
The influence factors experiment of poor contact discharge in indoor power grid
356
The influence factors of customer recognition research — Based on perceived value
357
The influence factors of Electronic Bill Presentment and Payment—A case study of mobile phone bill
358
The Influence Factors of Knowledge Transfer in Project Management: An Empirical Survey
359
The influence factors of rural land circulation based on farm households subtitle as needed
360
The Influence Factors of Subscriber Locked in the Era of 4G - A Consumer Behavior Perspective
361
The influence factors ofenterprise innovation ability construction and the strategy research
362
The influence factors on channel selection: A study on online shopping for infant milk powders
363
The influence factors on Chinese tax growth of analysis
364
The Influence Factors on Empirical Knowledge Accumulation of Novice Engineers Based on Complex Cognition Theory
365
The influence factors to the enterprise microblogs A research of the restaurant enterprise microblogs on Weibo.com
366
The influence for field orient of rotor resistance in induction motor
367
The Influence from Stock Index Futures to Stock Market Volatility
368
The Influence Machine: Nonnegative Instance-Space Learning with Differentiated Regularization
369
The Influence Mechanism of Ash-Flushing Water from Power Plant on Groundwater Environment
370
The influence mechanism of modularization on enterprises´ knowledge innovation and relative management strategies
371
The influence mechanism study of word of mouth on the phone purchase intention of migrant workers
372
The influence mobility model: a novel hierarchical mobility modeling framework
373
The influence model
374
The influence of “off-axis” from (100) oriented Si wafers on junction depth and sheet resistance for low-energy implantation and rapid thermal annealing
375
The influence of (510) step surface on the segregation of (110)surface of O/RhxPt1−x alloy system
376
The Influence of \\hbox {H}_{2}\\hbox {S} Exposure on Immersion-Silver-Finished PCBs Under Mixed-Flow Gas Testing
377
The Influence of \\hbox {CeO}_{2} Nano-Dots Decoration on Substrates on Flux Pinning Strength in \\hbox</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>378</div><a href='49/2435090.htm'>The influence of 112 synchrotron radiating birkeland filaments formed in an archaic auroral sheath on man-made structures and artifacts found worldwide</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>379</div><a href='49/2587279.htm'>The influence of 3D inhomogeneity of external magnetic field on dispersion properties of low-frequency MHD waves in stellarator</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>380</div><a href='49/2587306.htm'>The influence of 3D inhomogeneity of external magnetic field on dispersion properties of low-frequency MHD waves in stellarator</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>381</div><a href='49/3779341.htm'>The influence of 4Ps and system quality on perceived quality after mobile instant messaging usage</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>382</div><a href='49/1633132.htm'>The Influence of 56 Synchrotron Radiating Birkeland Filaments Formed in an Archaic Auroral Sheath on Man-Made Structures and Artifacts Found Worldwide</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>383</div><a href='49/2461910.htm'>The Influence of a Chrome Film Bonding Layer on SAW Resonator Performance</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>384</div><a href='49/3161972.htm'>The influence of a compact test circuit in the puncture test</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>385</div><a href='49/350184.htm'>The influence of a conducting particle on a spacer on the insulation properties in SF<sub>6</sub>/N<sub>2</sub> mixtures</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>386</div><a href='49/932492.htm'>The influence of a cylindrical shield electrode on the dielectric strength of large vacuum gaps</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>387</div><a href='49/1072046.htm'>The Influence of a Dc Bias on Streamers Produced by Step Voltages in Transformer Oil and over Solid-Liquid Interfaces</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>388</div><a href='49/3772561.htm'>The influence of a dc bias on streamers produced by step voltages in transformer oil with and without insulating surfaces</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>389</div><a href='49/3204325.htm'>The influence of a DC electric field on high power microwave window flashover in air and N<inf>2</inf> environments</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>390</div><a href='49/282728.htm'>The influence of a DC test voltage on the AC performance of new and old XLPE cables</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>391</div><a href='49/944943.htm'>The influence of a fibre structure on optical loss in a graded-index fibre</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>392</div><a href='49/3478587.htm'>The influence of a field-dependent total effective charge number on the interfacial migration rate and the phase growth behavior during intermediate phase growth with electromigration present</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>393</div><a href='49/2083819.htm'>The Influence of a Lossy Backmetallization on the Transmission Properties in CPW</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>394</div><a href='49/348487.htm'>The influence of a magnetic field on a crystalline structure of carbon nitride thin films deposition</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>395</div><a href='49/242088.htm'>The influence of a magnetized plasma column on the radiation characteristics of a strip loop antenna</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>396</div><a href='49/2519962.htm'>The influence of a malignant nodule on resonance frequencies of the thyroid gland</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>397</div><a href='49/3644490.htm'>The influence of a matrix condition number on iterative methods´ convergence</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>398</div><a href='49/2869424.htm'>The Influence of a Motion-sensing and Game-based Mobile Learning System on Learning Achievement and Learning Retention</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>399</div><a href='49/2731103.htm'>The Influence of a Novel Contacted Polysilicon-Filled Deep Trench (DT) Biased Structure and Its Voltage Bias State on CMOS Latchup</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>400</div><a href='49/2834450.htm'>The influence of a phase change in the measured voltage on flickermeter response</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>401</div><a href='49/1476179.htm'>The Influence of a Piezoelectric Field on the Dynamic Performance of GaN-Based Green Light-Emitting Diodes With an InGaN Insertion Layer</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>402</div><a href='49/739157.htm'>The Influence of a Power Law Distribution of Cluster Size on the Light Transmission of Disordered 1-D Photonic Structures</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>403</div><a href='49/2794756.htm'>The influence of a pretreatment on the loss behavior of watertree retardent XLPE insulation materials</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>404</div><a href='49/1590339.htm'>The Influence of a Robot´s Social Abilities on Acceptance by Elderly Users</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>405</div><a href='49/603969.htm'>The influence of a ROV themed engineering design workshop on in-service teacher self-efficacy</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>406</div><a href='49/1787840.htm'>The influence of a SAR sensor trajectory deviation on the pip azimuth position in echo signals simulation based on prearranged samples</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>407</div><a href='49/1227613.htm'>The influence of a second resonance on the saturation characteristics of the four-wave sum mixing</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>408</div><a href='49/1650686.htm'>The influence of a silicon dioxide-filled trench isolation structure and implanted sub-collector on latchup robustness</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>409</div><a href='49/698713.htm'>The influence of a single-tone sinusiod over hurst estimators</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>410</div><a href='49/1312156.htm'>The influence of a solid dielectric spacer on electron avalanches in nitrogen at atmospheric pressure</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>411</div><a href='49/3772156.htm'>The influence of a solid spacer on the temporal development of laser initiated prebreakdown current in air at atmospheric pressure</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>412</div><a href='49/1626212.htm'>The influence of a strong electric field on the operating modes of the Auger transistor and the radiation detectors based on field emitters</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>413</div><a href='49/1431210.htm'>The influence of a top cover on the leakage from microstrip line</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>414</div><a href='49/2326952.htm'>The influence of a top cover on the leakage from microstrip line</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>415</div><a href='49/891869.htm'>The influence of a transverse electric field on helicon wave propagation in InSb at 35 GHz</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>416</div><a href='49/1374605.htm'>The influence of a transverse magnetic field on an unconfined glow discharge</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>417</div><a href='49/2191622.htm'>The influence of a vacuum circuit breaker and circuit parameters on switching overvoltages generated during interruption of starting motors</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>418</div><a href='49/1286550.htm'>The influence of a variable volume water heater on the domestic load profile</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>419</div><a href='49/2347480.htm'>The Influence of a Wavelength Allocation Scheme to an Optical Burst Switching Node Performance</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>420</div><a href='49/2826800.htm'>The Influence of «Lacing» Interface Positions on I-V Characteristics for RTD Combined Model</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>421</div><a href='49/978230.htm'>The influence of aberrations and aperture inclinations on the phase and intensity structure in the image region of a lens</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>422</div><a href='49/2996216.htm'>The influence of absorbed gases on electroluminescence phenomenon in polymeric materials subjected to high electrical stress</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>423</div><a href='49/3278816.htm'>The Influence of Absorbed Moisture on Partial Discharge Patterns Measured During Tree Growth in an Epoxy Resin</a></div> <div class='valueDiv recordListRow doc-list-item'><div class='rowCountCircle'>424</div><a href='49/83487.htm'>The Influence of Absorber Thickness on Cu(In,Ga)Se<formula formulatype= _{\\bf 2} Solar Cells With Different Buffer Layers
425
The influence of accelerated ageing on the oil impregnated paper
426
The influence of accelerated aging procedures on the correlation of electrical and mechanical properties of LV nuclear power plant cables
427
The influence of accelerator physics on the magnet design of a very large hadron collider
428
The influence of achievement goal orientation, self-efficacy and task difficulty on JOL
429
The influence of achievement goal orientation, self-efficacy on allocation of study time
430
The influence of acid rain on the resistance to tracking of polymer insulating materials
431
The influence of acid rain on the tracking deterioration of organic insulating materials
432
The influence of acoustic reflectors on the temperature coefficient of frequency of solidly mounted resonators
433
The Influence of Acoustic Velocity on the Space Charge Measurement by Pulsed Electro-Acoustic
434
The Influence of Activation Time on Contraction Force of Myocardial Tissue: a Simulation Study
435
The influence of active measurement on unstructured peer-to-peer network
436
The influence of actuator nonlinearities in advanced flight control system design
437
The influence of acupuncture therapy on early rehabilitation following anterior cruciate ligament reconstruction: A randomized controlled trial
438
The influence of acute stress on brain dynamics
439
The influence of adaptation on vergence dynamics
440
The influence of ADC in fiber optic communication systems with maximum-likelihood sequence estimation
441
The influence of additional earthing of healthy phase for earth fault location on safety of compensated networks
442
The influence of additional loss on rotor surface heat transfer coefficient and temperature field of large air-cooled hydro-generator
443
The influence of additive Mn(CH3COO)2 on the TSC characteristics and surface charge distribution of Alumina ceramics
444
The influence of additives on the space charge formation and charge profiles in XLPE
445
The influence of adhesive composition on mechanical and electrical properties of joints between SMDs and PCBs
446
The influence of adhesive materials on chip-on-board packing of MEMS microphone
447
The influence of adjacent channel interference on FM communication system
448
The influence of admixtures on reducibility of gas sensitive materials
449
The Influence of adopting detailed healthcare record on improving the quality of healthcare diagnosis and decision making processes
450
The influence of adsorption desorption processes on the work function of the cathode made of carbon nanotubes
451
The influence of advance angle for constant power speed-adjust of brushless DC motors on electromagnetic performance
452
The Influence of Affect on Capital Budgeting Decision
453
The influence of ageing on the characteristics of oil-filled cable dielectric
454
The influence of ageing process on the shape and the propagation kinetics of the water trees in needle-plane polyethylene samples
455
The influence of aging on the creep behavior of underfill encapsulants
456
The influence of aging on the stress-strain and creep behavior of SAC solder alloys
457
The influence of aging population on China´s economy in the information society
458
The Influence of Air Density on Scatterometer Retrievals of Surface Turbulent Stress
459
The Influence of Air Distribution on the Single-Phase Flow Field of Central Fuel Rich Swirl Burner
460
The influence of air gap size and winding position on the proximity losses in high frequency transformers
461
The influence of air gaps at slowdown of main LM-mode in a waveguide with multilayer dielectric filling
462
The influence of air-gap tolerances on the admittance of a dielectric-coated slot antenna
463
The influence of air-water interface boundary conditions on thermal radio emission at 2, 5 and 8 mm
464
The influence of AJAX on Web usability
465
The influence of Al morphology on quality in Nb/Al/AlO/sub x//Al/Nb epitaxial base layer junctions
466
The influence of Al substitution on the relationship between remanence and coercivity of Ba- and Sr-Ferrite
467
The influence of Al2O3 / SiO2 ratio on properties of pegmatite porous glass-ceramics
468
The Influence of Al2O3 Nanofluid on the Falling Film Absorption with Ammonia-water
469
The Influence of Alignment on the Post-Implementation Success of a Core Banking Information System: An Embedded Case Study
470
The influence of alloying elements on metastable NiSn4 in Sn-Ag solders on Ni-containing metallizations
471
The influence of alternating currents on certain melted metallic salts
472
The influence of altitude and look angle on SAR ocean wave imaging: a practical compromise
473
The influence of alumina trihydrate filler on the leakage current in a salt-fog test for polymeric material
474
The influence of amateur radio on the development of the commercial market for quartz piezoelectric resonators in the United States
475
The influence of ambient gases on pulse conduction of plasma-polymerized ethylene thin films
476
The influence of ambient temperature on femtosecond laser ablation of semiconductor and metal
477
The influence of ambipolar electric field on the EDF formation and the electron processes in partially ionized plasmas
478
The Influence of Amino and Hydroxyl of Chitosan on Hydroxyl Radical Scavenging Activity
479
The Influence of Amplitude Limiting and Frequency Selectivity upon the Performance of Radio Receivers in Noise
480
The Influence of an Additional Substance in the Trenches Surrounding the Grounding Grid´s Conductors on the Grounding Grid´s Performance
481
The influence of an AlOx film in-situ deposited on the GaAs-based HFETs properties
482
The influence of an asymmetric air gap on the vibration characteristics of quartz trapped energy resonators
483
The influence of an axial magnetic field on the performance of a coaxial vircator
484
The influence of an eclipse of the sun on the ionosphere
485
The influence of an electronegative gas admixture on the intense E-beam transport and induced plasma currents in argon
486
The influence of an external permanent magnetic field on the dynamics of plasma channels in a radial pseudospark switch
487
The Influence of an Externally Induced Lateral Electric Field on Bipolar Transistors
488
The influence of an impedance surface on eigenfrequency of a hemispherical quasi-optical dielectric resonator
489
The influence of an LIGBT on CMOS latch up in power integrated circuit
490
The influence of an optical well in controlling the mode splitting in a photonic molecule
491
The influence of analog device on OFDM system
492
The Influence of Anisotropy on the Stability of a Beam Guided Disc Delay Line
493
The influence of anneal time on exchange-coupling in Nd2Fe14B/α-Fe films
494
The influence of annealing and mechanical deformation on the superconductivity and structure of DC-sputtered Nb3Ge
495
The influence of annealing in saturated water vapor on LiNbO3 crystals optical and electrical properties
496
The influence of annealing on fluorene-type thin film produced by biphenyl and methane RF plasma system
497
The influence of annealing on material properties of rotary-friction welded steel-parts
498
The influence of annealing on the magnetic and structural properties of Ni-Fe-Cu layers
499
The influence of annealing on the microstructure and electrical resistivity of jelly-rolled Cu-Nb composite wires
500
The influence of annealing on the passivation quality of A-SiCX:H on crystalline silicon and germanium surfaces
501
The influence of annealing on the structural and magnetic properties of the Co/sub 100-x/Ni/sub x/ thin films
502
The influence of annealing parameters on the structure and optical and electrical properties of VO/sub x/ films
503
The influence of annealing temperature and film thickness on crystallization behaviors of IGZO thin films
504
The influence of annealing temperature on the structural and optical properties of porous ZnO nanobelts
505
The influence of annealing temperature on the structure and magnetic properties of Fe-Si-Al-Cr flake-shaped particles
506
The Influence of Anode/Target Ion Species on the Magnetically Immersed Diode
507
The influence of anode-plasma location on total current in self-magnetically-limited electron-beam diodes
508
The influence of antagonist muscle control strategies on the isometric frequency response of the cat´s ankle joint
509
The influence of antecedent factors of IS/IT utilization towards organizational performance: A case study of IAIN Raden Fatah Palembang
510
The influence of antenna aperture and atmospheric absorption on amplitude scintillations on millimetric wave communications links
511
The influence of antenna characteristics on information redundancy of communication channel
512
The influence of antenna directivity on physical layer simulations of 802.11n devices
513
The Influence of Antenna Pattern on Faraday Rotation in Remote Sensing at L-Band
514
The influence of antenna pattern on Faraday rotation in remote sensing at L-band
515
The influence of anvil shape on metal flow pattern during size pressing of slab
516
The influence of aperture shape on the enhanced transmission properties of a periodic array of subwavelength apertures
517
The influence of aperture shape on the radiation patterns of horn-reflector antennas
518
The influence of aperture size and shape on crosstalk level in free-space grating demultiplexers for WDM networks
519
The influence of App churn on App success and StackOverflow discussions
520
The influence of applied tensile stress on power loss in Co-rich amorphous Co-Fe-Si-B ribbons with induced magnetic anisotropy
521
The influence of applied voltage and Medium Materials on Dielectric Barrier Discharge
522
The influence of applied voltage on the surface conductivity of atmospheric ice deposited on insulating surfaces
523
The influence of approach speed and functional noise on users´ perception of a robot
524
The influence of arc chamber wall material on arc gap dielectric recovery voltage
525
The influence of arc chamber wall material on arc gap dielectric recovery voltage
526
The Influence of arc on Dissolved Gases in Transformer Oils
527
The influence of architecture in product families
528
The influence of Ar-N/sub 2/ plasma conditions on GaN thin film deposition by reactive magnetron sputtering
529
The Influence of Array Geometry on System Performance
530
The influence of array vertical directivity patterns on bottom reverberation for mid to high frequency active sonar working in littoral shallow waters
531
The influence of ART1 parameters setting on the behavior of layer 2
532
The influence of aspect ratio of dots on ink transfer in gravure printing using conductive ink
533
The influence of assumed relationships between bone´s mechanical properties and CT density on results of finite element analyses
534
The influence of asymmetric water layer on the radiation characteristics of reflector antenna
535
The influence of asymmetries on the parallel connection of IGBT chips under short-circuit condition
536
The influence of atmospheric environment to laser measurement
537
The influence of atmospheric layering upon radar detection and tracking
538
The influence of atmospheric pressure on the space charge of multilayered epoxy: a study using the thermal step method and the thermally stimulated discharge currents technique
539
The influence of atmospheric radiation on the heat balance of low-sloped roofs
540
The influence of atmospheric turbulence on the rangefinder laser beam
541
The Influence of Attachment Height on Lightning-Induced Voltages
542
The influence of attachment on the nonlinear behaviour of lipid encapsulated microbubbles at high frequencies
543
The Influence of Attenuation on Acoustic Emission Measurements
544
The influence of attenuation-map quality on the absolute quantitative accuracy of SPECT images
545
The influence of autoclave on plastic encapsulated microcircuit
546
The influence of automatic speech recognition accuracy on the performance of an automated speech assessment system
547
The influence of autoparametric resonances on the stability of power systems
548
The Influence of Axial Magnetic Centering Forces on Sleeve Bearing Induction Motors
549
The Influence of Axial Magnetic Centering Forces on Sleeve Bearing Induction Motors
550
The Influence of Axial Magnetic Field Distribution on High-Current Vacuum Arc
551
The influence of axial magnetic filed distribution on high-current vacuum arc
552
The Influence of Axial-Magnetic-Field Distribution on the Initial Expansion Process in Triggered Vacuum Arc
553
The influence of backward Stokes on quasiphase matched multiwave SRS in nonlinear periodical structures
554
The influence of baffle on furnace heat transfer in municipal waste incinerator
555
The influence of bandgap narrowing and impurity deionization on the characteristics of silicon bipolar microwave transistors
556
The influence of bar position on implant-retained mandibular overdenture a three dimensional finite element analysis
557
The influence of barrier height on the current sensitivity of a microwave Schottky detector
558
The influence of barriers on the penetration of solid insulation by discharges
559
The influence of bat wings for producing efficient net body forces in bio-inspired flapping robots
560
The Influence of Beacon on DV-hop in Wireless Sensor Networks
561
The Influence of Bending Strain on the Critical Current of {\\rm Nb}_{3}{\\rm Sn} Strands With Different Filament Twist Pitch
562
The influence of bends and ellipticity on the attenuation and propagation characteristics of the H01 circular waveguide mode
563
The influence of bends and ellipticity on the attenuation and propagation characteristics of the H01 circular waveguide mode
564
The influence of Berezovskaya state district power station on the condition of the atmosphere
565
The influence of BF2 and F implants on the 1/f noise in SiGe HBTs with a self-aligned link base
566
The influence of Bi and Al content on the deep levels in InGaP and AlInGaP solar cell structures
567
The influence of bias conditions upon the intrinsic noise parameters of short gate length GaAs MESFETs
568
The influence of biasing circuits on photomultiplier tube output noise spectra and transfer functions
569
The influence of Big Five personality traits on subjective well-being: Mediation of job satisfaction
570
The influence of bigram constraints on word recognition by humans: implications for computer speech recognition
571
The influence of binary modulations in passive optical network based on WDM
572
The influence of biofeedback on respiratory training effect
573
The Influence of Bionic Creatures and Natural Condition on Design Inspirtation
574
The Influence of Bit Patterned Medium Design and Imperfections on Magnetoresistive Playback
575
The Influence of Blank-Width Ratio on Stress Field during Heavy Axial Forgings Manufacturing with Horizontal V-Shaped Anvils
576
The influence of blocking layer on the photovoltaic performance of organometal halide perovskite solar cell
577
The influence of body effect and threshold voltage reduction on trench MOSFET body diode characteristics
578
The influence of body effect on the short-circuit ruggedness of emitter ballasted IGBTs
579
The influence of body temperature on a model of the human respiratory system
580
The influence of body-tied and floating-body structure in Double Gate Vertical n-MOSFET
581
The influence of booster sheds on AC flashover performance of ice-covered 750 kV class tension insulator strings
582
The influence of boron and titanium in amorphous magnetic films
583
The influence of bounce parameters on the make erosion of silver/metal-oxide contact materials
584
The influence of bounce parameters on the make erosion of silver/metal-oxide contact materials
585
The influence of boundary conditions and alignment layers on the field controlled light scattering in SA phase liquid crystal displays
586
The influence of boundary conditions and the bias on amplification from negative differential mobility elements
587
The influence of boundary conditions on resonant frequencies of cavities in 3-D FDTD algorithm using non-orthogonal co-ordinates
588
The Influence of Boundary Conditions on the Thin Laminate Nonlinear Dynamics With Applications to a Printed Wiring Board
589
The Influence of Boundary Layer Turbulence on the BER of 2.4 GHz Microwave Communication
590
The influence of boundary locations on wiring capacitance simulation
591
The influence of bridged slots on arc behavior in spiral type vacuum interrupter
592
The influence of BTA on the electrical properties of synthetic fluids
593
The influence of bubble clouds on acoustic propagation in the surf zone
594
The influence of buildings on the propagation of electromagnetic waves generated by lightning
595
The influence of buildings to wind velocity and direction
596
The Influence of Built Environments on Grocery Shopper´s Destination Choice—A case study of Seattle
597
The influence of bulk parameters on the switching behavior of FWDs for traction application
598
The influence of bulk traps on the charge-transfer inefficiency of bulk charge-coupled devices
599
The influence of bulk traps on the charge-transfer inefficiency of bulk charge-coupled devices
600
The influence of buried insulator type and film thickness on threshold voltage of a partially and fully depleted SOI-MOSFET
601
The influence of burst length in optical burst switching system with completely isolated classes
602
The influence of burstiness and correlation of traffic on an ATM multiplexer
603
The Influence of C2C Virtual Community Interactive Characteristic on the Network Purchasing Behavior
604
The influence of cable capacitance, generator neutral grounding and zig-zag transformer to third harmonic produced by synchronous generator
605
The influence of cable connections on TVSS performance
606
The influence of cable swings on the electrical parameters of flexible cables
607
The influence of cables on the electromagnetic fields around the power system substation
608
The influence of CAD/CAM application driven tool path generation on the design process of electric drive trains for machine tools
609
The Influence of Calcium Hypochlorite on Performance and Dynamics Characteristics of Simultaneous Desulfurization and Denitrification of Urea Aqueous Solutions
610
The influence of calcium to the map precipitate recycled from wastewater
611
The influence of calibration substrate boundary conditions on CPW characteristics and calibration accuracy at mm-wave frequencies
612
The influence of camera shakes, harmful occlusions and camera misalignment on the perceived quality in user generated video
613
The influence of capacitive discontinuity in signal integrity on PCB traces
614
The Influence Of Carbon Nanocluster Defects On Carbon Film Field Emission
615
The influence of cardiac trabeculae on ventricular mechanics
616
The influence of carrier density non-pinning on the output power of 1.55 μm lasers at high temperature
617
The Influence of Cataphoresis Upon the Noise Temperature of F8T5 Lamps
618
The influence of cathodic hydrogen on the internal friction of electrolytic nickel
619
The Influence of Cation Impurities on the Scintillation Performance of {{\\hbox {SrI}}_2} (Eu)
620
The influence of cavity dispersion on amplitude and frequency noise in a Yb-fiber laser comb
621
The influence of cavity shape and sample geometry on partial discharge behavior
622
The influence of cavity´s parameters within polyimide material on partial discharge
623
The Influence of Ce on Spirodela polyrrhiza
624
The influence of cell library characteristics on power consumption of CMOS circuits
625
The influence of cell-substrate and cell-medium interfacial tension on the cell spreading
626
The influence of cellulose insulation aging degree on its water sorption properties and bubble evolution
627
The Influence of Cement and Hydrated Lime on the Performance of Asphalt Mortar
628
The influence of cementitious building materials on polymeric surfaces of embedded optical fibers for sensors
629
The influence of certain angles and shapes, and their relevance for marketing and industrial design
630
The Influence of Certain Ionoshperic Phenomena on Extremely Low Frequency (ELF) Propagation
631
The influence of certain transmission-line associated apparatus on travelling waves
632
The influence of CH4 carrier gas in plasma polymerized styrene films
633
The Influence of Changbai Mountain Area Land Utilization Change to Ecosystem Service Value
634
The Influence of Changes in Customer´s Technology Portfolio on Supplier´s Organization
635
The Influence of Changes in Patellar and Femoral Prosthesis on Knee Extensor Mechanism after TKA
636
The influence of changes in the composition of substrate on the mechanical properties of coatings
637
The Influence of Channel Compositions on the Electrical Properties of Solution-Processed Indium-Zinc Oxide Thin-Film Transistors
638
The influence of channel models on simulated MIMO performance
639
The influence of charge on surface flashover
640
The Influence of Charged Sand Particles on the External Insulation Performance of Composite Insulators in Sandstorm Condition
641
The influence of charging/discharging current on supercapacitor´s storage capacity
642
The Influence of Checklists and Roles on Software Practitioner Risk Perception and Decision-Making
643
The influence of chemical structure on the dielectric behavior of polypropylene
644
The influence of chemical structure on the dielectric behaviour of polypropylene
645
The influence of chemistry on B/H loop shape, coercivity and flux-reversal time in ferrites
646
The influence of chiimney structural parameters on the solar chimneys integrated with seawater desalination
647
The Influence of Chinese Government Expenditure on Resident Consumption: Research Based on DSGE Model
648
The influence of chirp and extinction ratio on directly modulated DFB lasers
649
The Influence of Chord Duration Modeling on Chord and Local Key Extraction
650
The influence of chordal paths on signals propagating to the near antipode of an HF radio transmitter
651
The influence of chromatic aberration on demosaicking
652
The influence of circuit parameters and contact materials on the reignition of high frequency vacuum arcs
653
The influence of circuit parameters and contact materials on the reignition of high-frequency vacuum arcs
654
The influence of circularly polarized microwave irradiation on properties of plasma membrane of human cells
655
The Influence of Circumstance on the Electromagnetic Wave Tool
656
The Influence of Class Imbalance on Cost-Sensitive Learning: An Empirical Study
657
The influence of class order on rule induction results
658
The Influence of Cleaning on SiO2 Growth
659
The influence of climate change on hydro generation in Brazil
660
The influence of climate on the flux of sediment to the coastal ocean
661
The influence of climatic conditions on the diagnostic results of return voltage measurements
662
The influence of clip bottles on top-coal´s falling and release properties
663
The influence of clock-gating on NBTI-induced delay degradation
664
The influence of cloud cover on the microwave scattering coefficient (σ°) of first-year and multiyear sea ice
665
The influence of cloud cover on the radiation budget, physical properties, and microwave scattering coefficient (σ°) of first-year and multiyear sea ice
666
The influence of clouds on microwave brightness temperatures viewing downward over open seas
667
The influence of clustering techniques in the RBF networks generalization
668
The influence of CO and CO2laser performance
669
The influence of CO2 in the measurements of mass concentration of alcohol in exhaled breath using dual IR & EC technology
670
The influence of coarsening treatments upon properties of in situ Nb3Sn-Cu superconducting wire
671
The influence of co-authorship networks on the performance of graduate programs in the Brazilian evaluation system
672
The Influence of COCOMO on Software Engineering Education and Training
673
The Influence of Co-Contraction to the Arm Impedance During Free Planar Movement
674
The influence of coding on closed loop remote control systems
675
The influence of codopants and fabrication conditions on germanium defects in optical fiber preforms
676
The influence of cognitive complexity on leadership effectiveness: Moderating effects of environmental complexity
677
The influence of coherent and incoherent transmission on I-V characteristics of RTD
678
The influence of coil and surge parameters on transient interturn voltage distribution in stator windings
679
The influence of coil parameters on the voltage distribution in a machine stator winding fed by a PWM inverter
680
The influence of collaborative governance mechanisms on innovation capabilities of service outsourcing enterprises: An empirical study in China
681
The influence of color brightness on the perception of clothes gorgeousness
682
The Influence of Color Burst Variations on the Design and Performance of Color Receivers
683
The influence of color temperature on the monitor gamut
684
The influence of communication distance on multipath channel characteristic of tunnel
685
The Influence of Communication Richness, Self-Interest, and Relational Trust on Banks’ Knowledge About Firms Within the Small-Cap Debt Finance Markets
686
The influence of commutation failures on the reliability of HVDC transmission systems
687
The influence of compatibilizer on structural morphology and dielectric property of crosslinked polyethylene/montmorillonite nanocomposites
688
The Influence Of Complex Geometries and Stress Non-Uniformity On Reliability
689
The Influence Of Complex Geometries And Stress Non-Uniformity On Reliability
690
The influence of complex material coverings on the quality factor of simple radiating systems
691
The influence of complex network communication by Interaction coefficient
692
The Influence of Complex Permeability on the Broadband Frequency Response of a Power Transformer
693
The influence of complex waves on the radiation field of a slot-excited plasma layer
694
The influence of component and parameter variations on the performance and design of solar power systems used in telecommunications applications
695
The influence of composition and aging on the Curie temperature of metallic glasses
696
The influence of composition and Cr particle size of Cu/Cr contacts on chopping current, contact resistance, and breakdown voltage in vacuum interrupters
697
The influence of composition change on structural and magnetic properties of non-stoichiometric Ni-Mn-Ga alloys
698
The influence of compressive and tensile axial strain on the critical properties of Nb/sub 3/Sn conductors
699
The influence of concentrated heat flux on dielectric properties of synthetic and natural esters
700
The influence of concurrent process duplication on the performance of parallel applications executing on COWs
701
The influence of conduct of internal marketing to service oriented attitude of nursing staffs in hospitals
702
The influence of Conducting Rough Surfaces on the performance of microwave coaxial filter
703
The Influence of Conducting Walls on Resonant Frequencies of the Dielectric Microwave Resonator (Correspondence)
704
The influence of conductivity perturbations on MIT sensitivity field
705
The Influence of Configurational Degeneracy on the Hysteretic Behavior of a System of Magnetostatically Coupled Magnetic Moments
706
The influence of connector repeatability on the identification of transmission lines
707
The influence of constructional parameters on the practical performance of 1-3 piezocomposite transducers
708
The influence of constructive structure on radiation pattern for planar array antennas
709
The influence of consumers´ load/consumption characteristics on metering practice
710
The influence of contact area widths on the RTD I-V characteristics
711
The influence of contact interface characteristics on vibration-induced fretting degradation
712
The Influence of Contact Materials and Chamber Wall Material on the Migration and the Splitting of the Arc in Extinction Chambers
713
The influence of contact mode on resolution in UV 400 lithography
714
The influence of contact surface microstructure on vacuum arc stability and voltage
715
The Influence of Contamination on Aluminum-Gold Intermetallics
716
The influence of contaminations on HVDC conductor corona characteristics
717
The influence of context on emotion recognition in humans
718
The Influence of Context on Intentional Service
719
The influence of continuous-wave and modulated interference on incoherent spectral codes
720
The Influence of Contour on Similarity Perception of Star Glyphs
721
The influence of control methods in technological process to save electrical energy
722
The influence of control strategies on the energy capture of wind turbines
723
The influence of controlled and fixed load composition on operation of autonomous wind-diesel system
724
The influence of cooling ducts on the leakage inductances of induction machines
725
The influence of cooling requirements, chassis resistance, and fan selection on noise emission
726
The influence of cooperative learning teaching mode on the physical health and personal communication of the male college students in basketball lessons
727
The influence of coordination on program structure
728
The influence of copper contamination on gate oxide integrity
729
The influence of copper smelter requirements on design rules for electronics
730
The influence of copper substrate treatment on the growth of Cu/sub 2/S nanowires arrays and their field emission characteristics
731
The influence of copper trace routing on the BGA lifetime prediction in JEDEC drop tests
732
The Influence of corona discharge on space charge accumulation in polyimide film
733
The Influence of Corona Intensity on the TSC of HTV Silicone Rubber
734
The influence of corona near to the bushing of a transformer on partial discharge measurement with an acoustic emission sensor
735
The influence of correlation functions on stochastic kriging metamodels
736
The Influence of Corrosion Inhibitor and Surface Abrasion on the Failure of Aluminum-Wired Twist-on Connections
737
The influence of costs of fossil fuels and nuclear option on the future spanish generation system
738
The influence of Coulomb enhancement on the modulation properties of quantum-well lasers
739
The Influence of Coulomb Interaction on Spatial Resolution of Charged Particles Nanobeams in Modern Projetion and Scanning Systems
740
The Influence of Country-of-Origin on Human Resource Strategy of Multinational Companies in Developing Countries
741
The influence of coupling layer thickness on hollow axles ultrasonic testing
742
The influence of Cr:YAG crystal characteristics on pulsed laser performance
743
The Influence of Crank Speed of Bush Reciprocating Cutter on Bush Cut
744
The influence of creep effects on the determination of local material parameters
745
The influence of cricket bowler´s joint rotations on ball release speed
746
The influence of critical distance on monitoring dips in the MV network
747
The Influence of Cross-Border Brand Alliance on Attitude of Consumers: A Conceptual and Structural Model Perspective
748
The influence of crosslinking agent on the properties of EVA resin
749
The influence of cross-phase modulation on optical FDM PSK homodyne transmission systems
750
The influence of cross-tie wall on the magnetoresistance of patterned Permalloy films
751
The Influence of Crystal Growth Rate and Electrodiffusion (Sweeping) on Point Defects in α-Quartz
752
The influence of crystal orientation on silicon semiconductor processing
753
The influence of crystal orientation on surface passivation in multi-crystalline silicon
754
The influence of crystal quality on the piezoresistive effect of β-SiC between RT and 450°C measured by using microstructures
755
The influence of crystalline morphology on the growth of water trees in PE
756
The Influence of CSF on EEG Sensitivity Distributions of Multilayered Head Models
757
The influence of CuCr25 characteristics on the interruption capability of vacuum interrupters
758
The influence of cultural intelligence and relationship quality on Offshore IS Outsourcing project success: From the Vendor´s perspective
759
The Influence of Cultural Values on Knowledge Sharing across Organizational Boundaries
760
The Influence of Culture Factors on Abiotic Loss of PAHs and Their Derivatives from Different Media
761
The influence of culture factors on defective automotive recall
762
The influence of culture on e-leadership in developing countries: Assessing Zimbabwe´s capacity gap in the context of e-government
763
The Influence of Culture on IT Governance: A Literature Review
764
The influence of culture on safety of products, systems and processes: A systems perspective
765
The Influence of Cure Method on the Sol Content and Physical Structure of Crosslinked Polyethylene Insulation
766
The influence of current amplitude on asymmetric off-diagonal magnetoimpedance in field-annealed amorphous ribbons
767
The influence of current injection on infrared absorption in polymers
768
The influence of current sensor and MPP tracking on Energy yield for PV power systems
769
The influence of current stress on the ageing of Au-A11% Si(1%Cu) ball-bond contacts studied by SEM and EDX
770
The influence of customer participation on employee job stress—The empirical research based on the role theory
771
The influence of Customer Relationship Management system in marketing telecom broadband services: A case study on Bharat Sanchar Nigam Limited
772
The influence of customers´ quality perception of commercial vehicles on their maintenance behavior
773
The Influence of Cutting Edge Deformations on Magnetic Performance Degradation of Electrical Steel
774
The influence of cutting edge deformations on magnetic performance degradation of electrical steel
775
The Influence of Cycle Slipping on the Error Probability of a PAM Receiver
776
The influence of cyclic strain on the differentiation of rat bone marrow derived mesenchymal stem cells to vascular smooth muscle
777
The influence of data codes on peak shift
778
The Influence of Data Process on Forming Precision of SLA Rapid Prototyping
779
The influence of dataset quality on the results of behavioral biometric experiments
780
The influence of dataset size on the performance of cell outage detection approach in LTE-A networks
781
The influence of dc bias an dielectric properties of thin sputtered tantalum oxide films
782
The influence of DC electric drives on sizing quadruped robots
783
The influence of DC electrical field on composite insulators icing and leakage current characteristics
784
The influence of DC offsets on the digital cancellation of second-order TX intermodulation distortions in homodyne receivers
785
The influence of DC transport current on the superconducting and normal properties of ceramic high-temperature superconducting Bi-based oxides after their heat treatment
786
The influence of DC-link voltage control on the performance of active power filter
787
The influence of D-dot probes on the propagation of a guided surface discharge [Paper Unavailable]
788
The influence of dead-time on AC servo motor’s low-speed operation
789
The influence of debye length on the C-V measurement of doping profiles
790
The influence of decision aids on choice strategies under conditions of high cognitive load
791
The influence of decoupling capacitor on the discharge behavior of fully silcided power-clamped device under HBM ESD event
792
The influence of deep levels on the admittance of MIS structures with sol-gel TiO2 insulator film
793
The influence of deep trench and substrate resistance on the latchup robustness in a BiCMOS silicon germanium technology
794
The influence of defect diffusion under electric field on optical and luminescent characteristics of cadmium sulphide
795
The Influence of Defect Distribution Function Parameters on Test Patterns Generation
796
The influence of defective structure surfaces and in-surface layers on a material durability
797
The influence of defects on the emission spectra of high power laser diodes
798
The influence of defects on the short-term breakdown characteristics and long-term dc performance of LDPE insulation
799
The influence of deformation on conductivity of Ga2O3-In2O3 thin films
800
The influence of degassing and heat treatment on the electric field distribution in extruded HVDC cables
801
The influence of degeneracy in the channel on long-channel MOSFET characteristics
802
The influence of degree mixing patterns on synchronization paths
803
The influence of delay upon an idealized channel´s bandwidth
804
The Influence of Delayed Coupling and Noise on Ca2+ Oscillatory Signal
805
The Influence of Delivery Time on Online Impulse Buying of Chinese Customer
806
The influence of delta-doped sheet position on the optical properties of InGaAs/GaAs single quantum wells
807
The influence of demagnetization on the domain structure of hard magnetic materials
808
The influence of demagnetization on the magnetic after-effect of Co-Cr micro structures
809
The Influence Of Demagnetization On The Magnetic After-effect Of Co-Cr Microstructures.
810
The Influence of Demand Resource Response Time in Balancing Wind and Load
811
The Influence of Dense Fog on Optical Wireless Systems, Analysed by Measurements in Graz for Improving the Link-Reliability
812
The influence of dense plasma of microwave discharge on the parameters of IC structures
813
The influence of density-difference on breakdown and high-field current of blended low-density polyethylene
814
The influence of deposition conditions on the magnetic properties in PtMnSb films
815
The influence of deposition conditions on the magneto-optic effect in GdTbCo films
816
The influence of deposition substrate temperature on the performance of organic electroluminescent devices
817
The influence of deposition temperature on the electrodeposition of NiO films on ITO-glass substrate
818
The influence of depression on coping strategies in mental arithmetic stress
819
The influence of depression on deactivation and neural correlates during mental arithmetic tasks
820
The influence of design parameters on contact interlocking caused by material transfer
821
The influence of design problem complexity on the attainment of design skills and student perceptions
822
The Influence of Developer Quality on Software Fault-Proneness Prediction
823
The influence of device physical parameters of HEMT large-signal characteristics
824
The influence of device selection on the performance of a simple BiCMOS operational amplifier
825
The influence of die tilting on the thermal response and die attach stress of a bottom exposed package
826
The influence of dielectric constant on bandwidth of U-notch microstrip patch antenna
827
The influence of dielectric dissipation factor on transformer Frequency Response Analysis
828
The influence of dielectric layer in waveguide on the characteristics of multislot antenna
829
The influence of dielectric layer thickness on surface plasmon resonance of gold nanodisc array on GaSb
830
The influence of dielectric losses on the rating of high-tension underground cables
831
The Influence of Dielectric Losses on the Rating of High-Tension Underground Cables
832
The influence of dielectric permittivity and its distribution on water tree initiation and growth in XLPE cables
833
The influence of dielectric resonator conductive surface impedance on the resonator spectral and energy characteristics
834
The influence of dielectric surface charge distribution upon the partial discharge behavior in short air gaps
835
The Influence of Different Atmospheres on Arc Width, Arc Mobility, and Contact Welding investigated for Low Power Switches
836
The influence of different baseline lengths to ground target signature in a FS micro-radar network
837
The influence of different bone remodeling equations on a 2-D vertebra model in the final bone density distribution
838
The influence of different conductors on insulating materials degradation by partial discharges
839
The influence of different core arrangements on magnetic properties of electrical sheets under one-dimensional magnetizing system
840
The Influence of Different Cost Functions in Global Optimization Techniques
841
The Influence of Different Dopands on the Photorefractive Properties of BTO Crystals
842
The influence of different electrode geometries on the current density distribution during radio-frequency ablation. A three-dimensional finite element study
843
The influence of different electropolymerization conditions on the electrochemical properties of poly(n-substituted pyrrole)
844
The influence of different grid length to the FDTD calculation
845
The influence of different heat sources on temperature distributions in broad-area diode lasers
846
The Influence of Different Inflow Water Rate and Temperature on Heat Exchange Performance of Underground Heat Pump
847
The influence of different insulators on paladium-gate metal-insulator-semiconductor hydrogen sensors
848
The influence of different locations of transmitter to dual trailing antenna´s characteristics
849
The influence of different materials in 13.56 RFID system
850
The influence of different measurement antennas on the radiated emission measurement
851
The influence of different PCB materials on the coupling behavior of high power electromagnetics
852
The influence of different slopes of defects on ultrasonic guided-wave in flat steel
853
The influence of different substrates on GaN films grown by low temperature laser and plasma enhanced MOCVD
854
The influence of different substrates on the magnetic degredation during slider-disk impact
855
The influence of different tariffs schemes on electricity consumption for the UK domestic buildings
856
The Influence of Different Thermo-Mechanical Histories on the Crystalline Morphology of PET Fiber/iPP Composites
857
The influence of different type of keyword on online consumer decision
858
The influence of different underlayers on the microstructure and magnetic properties of very thin CoCr films deposited by RF-sputtering on glass computer disks
859
The influence of different workload descriptions on a heuristic load balancing scheme
860
The Influence of differential modal gain on the filamentary behavior of broad area diode lasers
861
The influence of different-scale ionospheric irregularities on the residual error of the satellite navigation system
862
The Influence of Diffraction and Dispersion on the Fidelity of Degenerate Convolution
863
The influence of diffusion current on the zero-tc point of a MOS transistor
864
The influence of diffusion on the stability of the supercritical transferred electron amplifier
865
The influence of diffusion upon the amlification of a Gaussian laser beam in a CO2laser amplifier
866
The influence of diffusion-induced dislocations on high efficiency silicon solar cells
867
The influence of digital measurement system characteristics on PD patterns
868
The influence of dilute SLS solution on drag-reduction
869
The influence of dimensions of national culture on CSFs of ERP implementation: A case study
870
The influence of dipolar species on charge carrier transport in a linear polysilicon
871
The influence of dipole effect of evanescent waves on field distribution in slow wave structure such as coupled cavity chain with phase velocity jump of the wave
872
The influence of directional sampling on bidirectional reflectance and albedo retrieval using kernel-driven models
873
The Influence of Directly Modulated DFB Lasers on the Transmission Performance of Carrier-Suppressed Single-Sideband Optical OFDM Signals Over IMDD SMF Systems
874
The influence of directly modulated DFB LD sub-mode oscillation on long-span transmission system
875
The Influence Of Disaggregation Applied To Time Series Modelling Of Electrictipy Demand In The Industrial Sector
876
The influence of discharge parameters H gas in color alternate current plasma display panel
877
The influence of discharge voltage on ESD parameters for air discharge
878
The influence of discontinuous transmission on equal statistics in GSM
879
The Influence of Discrete Character of Following-Velocity on Chaotic Character of Traffic Flow in Different Density
880
The Influence of Discussions in Virtual Communities on Consumers´ Purchasing Behaviors in E-commerce: Implications for Trust Sources, Trust Building, and Consumer Purchase Intention
881
The influence of disk number to the performance of striping RAID
882
The influence of disorder in metallic photonic crystal slabs
883
The influence of display format on decision-making in a lung transplant home monitoring program-preliminary results
884
The influence of dissolved and particulate materials on underwater light fields in shelf seas: implications for primary production modelling
885
The Influence of Distance, Time, and Communication Network Structures on the Choice of Communication Partners
886
The influence of distributed parameters of transformer on the performance of high power DC-DC converter for Fuel Cell Vehicles
887
The influence of disturbances in iterative learning control
888
The influence of divertor target plates on the magnetic field of the dynamic ergodic divertor of TEXTOR-94
889
The influence of donor neutralization on the transfer characteristics of MODFET´s at 77 K: Theory and experiment
890
The influence of dopant species on transport properties in as-grown polypyrrole films prepared by electrochemical method
891
The influence of dopants on the properties of modified lead calcium titanate ceramics
892
The Influence of Doping Concentration, Temperature, and Electric Field on Mobility of Silicone Carbide Materials
893
The influence of doping inhomogeneities on the reverse characteristics of semiconductor power devices
894
The influence of Doppler effect on information transmission in sound channel
895
The influence of dose rate on total dose radiation effects on MOSFETs
896
The influence of dose rate on ultra shallow surface dopant profile
897
The Influence of Dosimetry on Earlier Damage Equivalence Ratios
898
The influence of double excitation AC/DC in the reactive power demand of 3-phase transformers
899
The Influence of Drift Distance on the Attainable Energy Resolution of a Bunched Electron Beam
900
The influence of driving current on emission spectra of GaN-based LED
901
The influence of driving form on stability control in in-wheel-motor EV
902
The influence of dummy fills on an on-chip spiral inductor and their optimized placement scheme
903
The influence of dust particles on the DC breakdown voltage of rod-rod air gaps
904
The influence of dynamic changes of indoor scenarios on electromagnetic wave propagation
905
The influence of dynamic element characteristics to voltage stability based on bifurcation theory
906
The influence of dynamic environment and resource allocation on enterprises financial performance
907
The influence of dynamic thermal characteristic of wall on air-conditioning load and thermal environment in building of different zoning for thermal design
908
The Influence of Dynamic Trans-tibial Prosthetic Alignment on Standing Plantar Foot Pressure
909
The influence of ecological compensation on the sustainable developemnt
910
The influence of ECR MW plasma deposition conditions on the microstructure and morphology of diamond like carbon films
911
The influence of eddy currents on magnetic actuator performance
912
The Influence of Edge Angle on Burr Formation Processes
913
The influence of edge effects on the axial-symmetrical antennas beamforming
914
The influence of edge effects on the detection properties of cadmium telluride
915
The influence of edges as salient features in haptic shape perception of 3D objects
916
The Influence of Efficiency on Receive Diversity and MIMO Capacity for Rayleigh-Fading Channels
917
The Influence of Efficient Message Passing Mechanisms on High Performance Distributed Scientific Computing
918
The influence of elastin-coated 520-nm- and 20-nm-diameter nanoparticles on human fibroblasts in vitro
919
The influence of electric field and emission current on the configuration of nanotubes in carbon nanotubes layers
920
The influence of electric field and mobility profile on GaAs MESFET characteristics
921
The influence of electric field distribution on the dielectric heat pipe performance
922
The influence of electric fields on basic processes connected with physical phenomena in two-phase systems
923
The influence of electrical characteristics of microwave magnetron power source on the process of plasma stripping from silicon plates surface
924
The influence of electrical impulse on IC transient radiation-induced effects
925
The Influence of Electrical Parameters of Double Fed Induction Generator on the Transient Voltage Stability
926
The influence of electrical partial discharges on the performance of zinc oxide surge arrester ceramics
927
The influence of electrical resistivity, magnetic field strength, boundary conditions, and injection conditions on the behavior of the magnetically injected plasmas in the PBFA-II opening switch
928
The influence of electric-field bending on the nonlinearity of capacitive sensors
929
The influence of electrochemical terms on TiO2 nanorod morphology and photoreduction ability
930
The influence of electrode designs on the resonant vibrations for square piezoceramic plates
931
The influence of electrode erosion on fault arc
932
The influence of electrode material on delayed discharges in vacuum interrupters
933
The influence of electrode position on the current-voltage characteristics and terahertz radiation in a high-Tc superconducting device
934
The influence of electrode size and type on surface stimulation of the quadriceps
935
The Influence of Electrode Size on Selectivity and Comfort in Transcutaneous Electrical Stimulation of the Forearm
936
The influence of electrode´s stratified structures on SAW devices microwave characteristics
937
The Influence of Electrode-Fluorine Reactions on Corona and Glow Discharges in SF6
938
The influence of electrodes and conditioning on space charge accumulation in XLPE
939
The influence of electrodes on the reliability to PZT thin film
940
The influence of electrodes resistance on arc motion between a pair of parallel electrodes
941
The influence of electrodynamic system ohmic losses in 1mm wavelength orotron on its efficiency and output power
942
The influence of electromagnetic environment on operation of active array antennas: analysis and simulation techniques
943
The Influence of Electromagnetic Field Irradiated by High-Voltage Transmission Lines on Properties of Cells
944
The Influence of Electromagnetic Field Irradiated by High-Voltage Transmission Lines on Properties of Signal Transduction of Cells
945
The Influence of Electromagnetic Force Upon the Noise of an IPM Motor Used in a Compressor
946
The influence of electromagnetic interference on microprocessor relay protection and automatics functioning safety
947
The influence of electromagnetic radiation of millimeter and centimeter range on human epithelial cells
948
The Influence of Electromigration and Aging on the Reliability of SnAgCu Lead-Free Solder Joint at 100°C
949
The Influence of Electron Beam Thickness on the Characteristics of a Coaxial-waveguide CARM Amplifier
950
The influence of electron density on the formation of streamers in electrical discharges triggered with ultrashort laser pulses
951
The influence of electron velocity spread on parameters of microwave vacuum microelectronics devices
952
The Influence of Electron-Beam Irradiation on the Characters of GaN-Based Light Emitting Diodes
953
The Influence of Electronic Word-of-Mouth Authenticity on Customers´ Behavior
954
The influence of electronic word-of-mouth on consumers´ quadratic selection: Based on the positive research of banks in mainland China
955
The influence of electrotechnical papers technology on their specific partial discharges inception electric field
956
The influence of element-Ni on interfacial reactions between lead-free Sn-Ag-Cu and Cu substrate
957
The Influence of Elevated Temperature Aging on Reliability of Lead Free Solder Joints
958
The influence of elevated temperature on degradation and lifetime prediction of thin silicon-dioxide films
959
The influence of eliminating the fixed electrode from an air-coupled, dual deflectable membrane, capacitive micromachined ultrasonic transducer
960
The influence of EM estimation of missing nodes in DCM on model ranking
961
The influence of embedded generator control modes on an electrical distribution network power flows and voltage profile
962
The Influence of Emitter and Receiver Motion on Acoustic Coherence in Shallow Water
963
The influence of emitter efficiency on single transistor latch in silicon-on-insulator MOSFETs
964
The influence of emitter material on silicon nitride passivation-induced degradation in InP-based HBTs
965
The Influence of Emitter Sidewall Injection on Transistor Noise Figure
966
The influence of emitter undercut on device parameters of SiGe HBT
967
The influence of emitter-base junction design on collector saturation current, ideality factor, Early voltage, and device switching speed of Si/SiGe HBT´s
968
The influence of Emotional Intelligence and Spiritual Intelligence in engineering entrepreneurial creativity and innovation
969
The influence of emotional intelligence on job performance: Moderating effects of leadership
970
The influence of end part leakage on stator temperature field
971
The influence of end-shape, time and temperature on the switching of small magnetic elements
972
The influence of energy indexing algorithm and electron substeps on MCNP4C electron transport: application in Monte Carlo simulation of s-ray spectra in diagnostic radiology and mammography
973
The influence of energy separated nozzle on the gas flow parameters for SF6 circuit breaker
974
The Influence of Energy-Transfer Upconversion on Thermal Lensing in End-Pumped ND:YLF and ND:YAG Lasers
975
The Influence of Enterprise Senior Management to NPD Projects: An Empirical Study
976
The Influence of Enterprises Income Tax Law on Electric Power Enterprise
977
The influence of enterprise-university-research institute collaboration on innovation: Empirical study on new energy industry in China
978
The influence of entrepreneurial creativity, work experiences, customer´s and competitor´s information, and scientific information on product and process innovations
979
The influence of entrepreneurial failure experience on subsequent entrepreneurial intention
980
The influence of environment on discharging currents in polyethylene terephthalate
981
The influence of environmental conditions on the macroscopic physical properties of outdoor insulator
982
The influence of environmental factors on spatial distribution of Soil moisture in Yanhe river basin
983
The influence of environmental factors on speed choice
984
The Influence of Environmental Management on Technical innovation: Evidence from Abundant Mineral Resources Areas
985
The Influence of Environmental Policy on Electrical Power Structure in China
986
The influence of epilayer structure on the properties of quantum well HEMT devices
987
The influence of epitaxy on the anistropy in thin electrodeposited cylindrical Ni-Fe films
988
The Influence Of Equipment Layout On Fab Productivity
989
The Influence of Equity Ownership Incentive on Enterprise Value in China - Empirical Analysis based on the Equity Ownership Incentive in a Market from 2006 to 2008
990
The influence of error propagation on the capacity of wireless networks
991
The Influence of E-service Quality on Consumer´s Satisfaction and WOM
992
The influence of eurocentricity on engineering courses and an approach to their transformation
993
The influence of evaporation duct on the propagation of electromagnetic waves low above the sea surface at 3-94 GHz
994
The influence of event-based sampling techniques on data transmission and control performance
995
The Influence of Excimer Formation on Solvent-Solute Energy Transfer in Organic Liquid Scintillators
996
The influence of exogenous GA on drought tolerance of transgenic Perennial Ryegrass with BADH-CMO gene
997
The Influence of Expected Demands Difference on Slotting Allowances: A Simulation Research Based on NSGA-II Algorithm
998
The Influence of Experience and Information Search Styles on Project Risk Identification Performance
999
The influence of experimental design method on design space exploration
1000
The influence of experimental method on the flashover performance of alumina in vacuum