ليست عنوان مقالات لاتين فني مهندسي Influence of fog parameters on the surface resistance of HTV silicone rubber Influence of long code auto-correlation on RAKE reception performance in DS-CDMA mobile communications

<< مقالات لاتين فني مهندسي >>

<< بر اساس عنوان >>

1

Influence of fog parameters on the surface resistance of HTV silicone rubber

2

Influence of Fog Parameters on Withstand Voltage of Contaminated Insulators

3

Influence of Fog Parameters on Withstand Voltage of Contaminated Insulators

4

Influence of food density on colony size of Pogonomyrmex barbatus

5

Influence of force disturbances on transparency in bilateral telemanipulation of soft environments

6

Influence of force structure on the stability

7

Influence of forcings and circulation patterns on mean temperatures at different scales: an analysis by neural network modeling

8

Influence of Formaldehyde on the Expression of Rab26 Gene in HEK293 Cell in Vitro

9

Influence of formulation and aging on the dielectric response of ethylene propylene rubber insulation compounds

10

Influence of forward pumping current on current interruption by semiconductor opening switch

11

Influence of four wave mixing on modulation format performance under 100 Gb/s data rate

12

Influence of foveated vision on video quality perception

13

Influence of Fowler-Nordheim tunnelling current on the strong inversion high-frequency capacitance of thin-insulator N-type metal-oxide-semiconductor structures

14

Influence of fractal conductive surfaces on parameters of transmission lines in MM-range

15

Influence of fractal dimensions on stimuli on searching reaction with focus on effects of objects included in stimuli images

16

Influence of Fractal Lacunarity on the Performance of Dipole Antennas with Generalized Koch Curves

17

Influence of fractals on resonant frequencies of a rectangular microstrip antenna

18

Influence of free carrier plasma effect on carrier-induced refractive index change for quantum-well lasers

19

Influence of free chlorine on nitrite accumulation in biological aerated filter(BAF)

20

Influence of freelayer in magnetic tunnel junction on switching of submicrometer magnetoresistive random access memory arrays

21

Influence of freeze-thaw cycle on SFRC with different fly ash mixing

22

Influence of freeze-thaw cycles on resilient modulus of different plasticity index subgrade soil

23

Influence of freon on charge density build-up in a solid insulator

24

Influence of Frequency Allocations and Optical Filters on FDM Optical Fiber Communications

25

Influence of frequency and current waveform on low pressure sodium lamp operation

26

Influence of frequency and current waveform on low-pressure sodium lamp operation

27

Influence of frequency and directional spreading on wave transformation in the nearshore region

28

Influence of frequency compensation on the linearity of negative feedback amplifiers

29

Influence of frequency control strategies on induction motor-centrifugal pump unit and its modes

30

Influence of Frequency Dependent Time to Breakdown on High-K/Metal Gate Reliability

31

Influence of frequency difference between current and voltage on ac power measurement result

32

Influence of frequency errors in the variance of the cumulative histogram

33

Influence of frequency errors in the variance of the cumulative histogram [in ADC testing]

34

Influence of frequency of longitudinal oscillations of axial conductor on Q-factor of microwave biconical cavity

35

Influence of frequency on electrical tree growth of Nylon 6 under nanosecond pulses

36

Influence of frequency on electrical tree initiation in high-density polyethylene

37

Influence of frequency on resistivity and dielectric permittivity of multilayer soil

38

Influence of frequency on the performance of integrated electric drive systems

39

Influence of frequency on water tree growth in various test cells

40

Influence of frequency on water treeing in polyethylene

41

Influence of frequency synchronization errors on hybrid bistatic SAR system

42

Influence of frequency, direction finder parameters and actual terrain topography on features of Kogan-Pavliouk location templates

43

Influence of frequency, electrode material and superimposed dc on ac electroluminescence in polymer films

44

Influence of frequency-droop supplementary control on disturbance propagation through VSC HVDC links

45

Influence of friction and lubrication on the formability of aluminium alloy plate

46

Influence of friction force on seal mechanism with one degree of freedom

47

Influence of frictions on gait optimization of a biped robot with an anthropomorphic knee

48

Influence of Fringe Field on Nano-Electromechanical (NEM) Memory Cells

49

Influence of Front Double Wishbone Independent Suspension Performance on Front Rubber Bushing Stiffness of Lower Control Arm

50

Influence of Front Structure on Compatibility between Sedan and SUV in Oblique Crash

51

Influence of FSR element shape on FSR backed dipole antenna applied to mobile base station antenna

52

Influence of fuel price fluctuation on revenue in energy service business and risk hedge thereagainst

53

Influence of fuel supply-advanced angle and injection starting pressure on the emission performance of D30 engine

54

Influence of fuel to oxidizer ratio on gas sensing characteristics of ZnFe2O4 nanoparticles

55

Influence of fuel-bed temperatures on CO and condensed matter emissions from packed-bed residential coal combustion

56

Influence of Fully Rated Converter-based wind turbines on SSR

57

Influence of functionalized MgO nanoparticles on electrical properties of polyethylene nanocomposites

58

Influence of future M2M communication on the LTE system

59

Influence of FWM dynamics on modulational instability in dispersion shifted fibers

60

Influence of G722.2 speech coding on text-independent speaker verification

61

Influence of Ga addition on structure, thermal and magnetic properties of CoFeBSiNb metallic glasses

62

Influence of Ga1−xAlxAs buffer layer on the optical properties in NEA GaAs photocathodes

63

Influence of GaAs buffer thickness on low-frequency and microwave noise in GaAs MESFETs grown on InP substrates

64

Influence of gadolinium doping on the crystalline structure and optical properties of zinc oxide thin films

65

Influence of Gain Broadening for Solid Laser Output Power

66

Influence of gain nonlinearities on the linewidth enhancement factor in semiconductor lasers

67

Influence of gain nonlinearity on the second order harmonic distortion in semiconductor lasers

68

Influence of gain on transmission of nanocavity containing metamaterials

69

Influence of gain saturation on the tuning range and tuning rate of three-contact DFB lasers and amplifier-filters: modelling and experiments

70

Influence of gain saturation, gain asymmetry, and pump/probe depletion on wavelength conversion efficiency of FWM in semiconductor optical amplifiers

71

Influence of gallium in a metallisation on GaAs

72

Influence of Gamma and X Radiation on Gas-Filled Surge Arrester Characteristics

73

Influence of Gamma Irradiation and Annealing on a Co-Based Alloy by the Permeability Spectra Measurement

74

Influence of gamma radiation on the electrooptic behavior of planar nematic liquid crystal cells

75

Influence of gamma radiation on the properties of polyethylenenapthalate (PEN)

76

Influence of gamma-irradiation on elements of submicron CMOS integrated circuits

77

Influence of Gamut Mapping Intents on Image Quality in Digital Printing

78

Influence of GaN cap on robustness of AlGaN/GaN HEMTs

79

Influence of GaN surface morphology on characteristics of Al0,3Ga0,7N/GaN heterostructures created by molecular beam epitaxy

80

Influence of gap between laser and optical waveguide

81

Influence of Gap Distance on the Arc Modes Transition of Cup Type AMF Electrode

82

Influence of gap junction dynamics on the stability of reentrant waves in cardiac tissue

83

Influence of Gap Length on Wire - Plane Corona

84

Influence of gap width on mode discrimination in cleaved coupled cavity lasers

85

Influence of Garnet Film Grooving on Stripe Domain Walls

86

Influence Of Gas Adsorption At The Interface On The Exchange Coupling Field Of Ni-Fe/25at%Ni-Mn Films Films

87

Influence of gas adsorption at the interface on the exchange coupling field of Ni-Fe/25at%Ni-Mn/Ni-Fe films

88

Influence of gas atmosphere during laser surface treatment of CNT cathode

89

Influence of gas bubbles on electrical discharges in small working gaps

90

Influence of gas condition and growth time on the growth of a spin-capable multi-walled carbon nanotube

91

Influence of gas density distribution on the pinch process in gas-puff Z-pinch scheme

92

Influence of gas flow on discharge mode in coaxial argon DBD under atmospheric pressure

93

Influence of gas flow rate and pressure in reactors on ozone production using a compact pulsed power generator

94

Influence of gas flow rate and reactor length on NO removal using pulsed power

95

Influence of gas heating and product molecules on discharge characteristics in dry-air-fed ozonizer

96

Influence of gas media on the stability of corona charged polyethylenterephtalate films stored at low pressure

97

Influence of gas source supply interruption on quantum well structure of few monolayer InP/In_0.53Ga_0.47As/InP grown by OMVPE

98

Influence of gas temperature on the performances of a low dead space capillary type pneumotachograph for neonatal ventilation

99

Influence of GaSb and AlGaInAsSb as Barrier Material on $\\sim$ 2.8- $\\mu$ m GaSb-Based Diode Laser P

100

Influence of Ga-substitution on the magnetostatic waves properties in garnet films.

101

Influence of gate and drain bias on the bias-stress stability of flexible organic thin-film transistors

102

Influence of gate architectures on the performance of SOI MOSFETs including the strained channel

103

Influence of Gate Bias on Surface Roughness Scattering Rate in GaAs/AlAs Transistor Structure

104

Influence of Gate Corrugations on the Performance of Thin-Film Transistors

105

Influence of gate drive and anode circuit conditions on the turn-off performance of GTO thyristors

106

Influence of gate engineering on the analog and RF performance of DG MOSFETs

107

Influence of gate geometry in integrated MOS varactors on accumulation mode for RF

108

Influence of Gate Head Dimensions on the Device performance of 0.12um PHEMT

109

Influence of Gate Insulator Engineering on the electronic transport of AlGaN/GaN MISHFETs: A simulation study for performance optimization and non linear device modeling

110

Influence of gate internal impedance on losses in a power MOS transistor switching at a high frequency in the ZVS mode

111

Influence of gate intervals on the behaviour of submicron dual-gate FETs

112

Influence of gate length on ESD-performance for deep sub micron CMOS technology

113

Influence of gate length on the performance of GaAs MESFETs by a physical I-V model

114

Influence of gate material and stress voltage on post breakdown leakage current of high K dielectrics

115

Influence of gate misalignment on the electrical characteristics of MuGFETs

116

Influence of gate offset spacer width on SOI MOSFETs HF properties

117

Influence of gate oxide charge density on VDMOS transistor ON-resistance

118

Influence of gate oxide short defects on the stability of minimal sized SRAM core-cell by applying non-split models

119

Influence of gate underlap in AM and IM MuGFETs

120

Influence of gate width and gate finger towards noise figure of p-HEMT

121

Influence of gate width on 50 nm gate length Si/sub 0.7/Ge/sub 0.3/ channel PMOSFETs

122

Influence of gate-channel distance in low-noise InP HEMTs

123

Influence of Gate-Electrode Fringing Capacitance on Threshold Voltage of Nano-MOSFET

124

Influence of Gauss White Noise on the Weak Signal Detection Based on Chaotic Oscillator

125

Influence of Ge addition on phase formation and electromagnetic properties in internal tin processed Nb₃Sn wires

126

Influence of Ge concentration on UV-excited luminescence in a graded-index fibre preform

127

Influence of Ge doping on defect distributions of Cu2Zn(Snx Ge1−x) (Sy Se1−y) fabricated by nanocrystal ink deposition with selenization

128

Influence of gender on coactivation ratio of agonist-antagonist muscle pair during maximum knee contraction

129

Influence of gender on the myoelectric signal of shank muscles

130

Influence of gender on the myoelectric signal of thigh muscles

131

Influence of gender, training and circadian time of testing in the cardiovascular response to stress tests

132

Influence of Gene Dose on In Vitro Culture Responses of Purple Coneflower (Echinacea purpurea L.)

133

Influence of Gene Parameter Nomorlization on Back-Propagation Artificial Neural Network Caculating Time of Animal Phenotype Value Prediction

134

Influence of generated organic gas on contact resistance for relay

135

Influence of Generator Capability Curves Representation on System Voltage and Reactive Power Control Studies

136

Influence of generator curtailment priority on network hosting capacity

137

Influence of generator load conditions on third-harmonic voltages in generator stator winding

138

Influence of generator load conditions on voltage 3rd harmonics in generator stator winding

139

Influence of Geomagnetically Induced Currents on three-phase power transformers

140

Influence of geometric factors on the polarity of a remanent magnetization

141

Influence of geometric factors on the polarity of a remanent magnetization

142

Influence of geometric parameters and cutting edge deterioration on the differential inductances

143

Influence of geometric parameters on characteristics of an interdigital dielectrometry sensor

144

Influence of Geometric Parameters on the Flow Drag of a Streamlined Body of Revolution

145

Influence of geometric structure and material properties on dielectric frequency response of composite oil cellulose insulation

146

Influence of Geometrical Configurations and Polarization Basis Definitions on the Analysis of Bistatic Polarimetric Measurements

147

Influence of Geometrical Configurations of HTS Roebel Cables on Their AC Losses

148

Influence of geometrical constraints on propagation in cardiac tissue

149

Influence of geometrical factors on crop backscattering at C-band

150

Influence of geometrical parameters of mutual parallel paths on process of disturbances propagation

151

Influence of geometrical parameters on capillary forces

152

Influence of geometrical parameters on the flexural rigidity of the LHC dipole cold mass assembly

153

Influence of geometrical shape of quantum dot on field emission

154

Influence of geometrical shape of return stroke channel on associated electromagnetic fields

155

Influence of geometry of — GC strokes on associated electromagnetic waveforms

156

Influence of geometry of microbump interconnects on thermal stress and fatigue life of interconnects in copper filled through silicon via structure

157

Influence of Geometry on Domain Wall Dynamics in Permalloy Nanodevices

158

Influence of geometry on domain wall propagation in a mesoscopic wire

159

Influence of geometry on electromagnetic oscillation generation in the virtual cathode triode

160

Influence of geometry on the directionality of light emission of nanorod array vertical light emitting diodes

161

Influence of geometry on the kinematic performances of a humanoid shoulder-girdle mechanism with clearance in the joints

162

Influence of geometry to dielectric frequency responses of oil-paper insulation

163

Influence of Ge-profile Design and Saturation Effects on SiGe HBT Linearity

164

Influence of germanium substitution on dielectric and ferroelectric properties of Ba(Fe0.5Nb0.5)O3 ceramics

165

Influence of GIS parameters on the Topler constant

166

Influence of GIS structure on propagation of electromagnetic waves of partial discharge

167

Influence of Glass-Frit Material Distribution on the Performance of Precision Piezoresistive MEMS Pressure Sensors

168

Influence of global constraints and lens distortion on pose and appearance recovery from a purely rotating camera

169

Influence of global disturbances on the propagation of ionospheric MF and HF radio waves: technique

170

Influence of glow cathode on parameters of ion-beam plasma

171

Influence of glow discharge pre-treatment on dielectric parameters in vacuum gaps

172

Influence of glycerol on the mechanical reversibility and thermal damage susceptibility of collagenous tissues

173

Influence of GMPLS on network providers´ operational expenditures: a quantitative study

174

Influence of Gold Nanoparticles on the Characteristics of Plasma Display Panels

175

Influence of gold nanorods environment on photoacoustic conversion

176

Influence of gold promoter on Fischer Tropsch synthesis Over Co/Al2O3 catalysts

177

Influence of Google Earth on students´ interest and learning attitude toward Geography Subject

178

Influence of Gouy Phase Shift on THz Time-Domain Spectroscopy

179

Influence of government subsidies on carbon reduction technology investment decisions in the supply chain

180

Influence of governor control systems on the stability of a wind farm integrated power system

181

Influence of governors on power-system transient stability

182

Influence of GPS code tracking on multipath performance

183

Influence of grading capacitors on the breaking capability of two vacuum circuit-breakers in series

184

Influence of grading capacitors on the breaking capacity of two vacuum interrupters in series

185

Influence of grading capacitors on the breaking performance of a 24-kV vacuum breaker series design

186

Influence of Grading Ring on Potential Distribution of 1000 kV Gas Insulted Switchgear Metal Oxide Arrester

187

Influence of Grafting Properties of Organic Thin Films for Low Level Electrical Contacts Protection

188

Influence of Grain Boundaries and Sn Distribution on the H-T Phase Diagram of Nb₃Sn

189

Influence of grain boundaries and voids on the saturated magnetization in Fe₃O₄ films at a low magnetic field

190

Influence of grain orientation on contact resistance at higher emitter resistances, investigated for alkaline and acid saw damage removal

191

Influence of Grain Size and Grain Boundary State on Work Function of Nickel

192

Influence of grain size and strain on the barkhausen noise power of non-oriented silicon steel

193

Influence of grain size on defect-related early failures in VLSI interconnects

194

Influence of grain size on the transport properties of Ni₈₀Fe₂₀ and Cu thin films

195

Influence of Graph Properties of Peer-to-Peer Topologies on Video Streaming with Network Channel Coding

196

Influence of gratings made from conducting wire elements on electromagnetic properties of radio absorbing coating

197

Influence of Green and Lean Upstream Supply Chain Management Practices on Business Sustainability

198

Influence of grid configuration on current conducting behaviour in PV installations

199

Influence of grid connected solar and wind energy on small signal stability

200

Influence of grid-connected inverters on the power quality of the distribution grid

201

Influence of grid-connected solar inverters and mains monitoring systems on the spectral grid impedance

202

Influence of grinding process on semiconductor chip strength

203

Influence of grit-size and sintering temperature on SiC target during pulsed laser deposition

204

Influence of Groove Profile on Surface-to-Bulk Wave Conversion of Rayleigh Waves at Shallow Grooves

205

Influence of ground and corona currents on dielectric behavior of small air gaps

206

Influence of ground conductivity on the over voltages induced on overhead power distribution lines due to an indirect lightning stroke

207

Influence of ground plane to distance dependence leaked electric field from power line

208

Influence of ground plane with variable conductivity on metamaterial absorption

209

Influence of Ground Potential Rise on Recloser Control Broad in Distribution Lines

210

Influence of ground reflections on radar target-tracking accuracy

211

Influence of Ground Rods on Grounding Grids

212

Influence of ground wire protection angle on upward leader from 110–1000 kV AC lines

213

Influence of grounded back electrode on AC creepage breakdown

214

Influence of grounding conditions on SE of shielded room in LEMP environment

215

Influence of grounding lateral and back ground planes in transitions between conductor backed coplanar waveguide and microstrip lines

216

Influence of grounding system modeling on Transient analysis of transmission lines due to direct lightning strike

217

Influence of groundwater level lowering on working behavior of composite foundation

218

Influence of group dynamics on organizational interfaces

219

Influence of group velocity dispersion on phase-preserving amplitude regeneration by a nonlinear amplifying loop mirror

220

Influence of group-velocity dispersion on multilevel phase-preserving amplitude regeneration in a nonlinear amplifying loop mirror

221

Influence of growth conditions on anisotropy energy coefficients for samarium doped garnet films

222

Influence of growth conditions on deep levels in molecular-beam-epitaxial GaAs

223

Influence of growth conditions on mobility and anisotropy of In_yGa_1-yAs/In_0.52Al_0.48As/InP HEMTs with y=0.53 to 0.80

224

Influence of growth conditions on morphology of ZnO nanostructures in CVD process

225

Influence of growth conditions on structure, composition homogeneity and mechanical properties of thermoelectric crystals for coolers

226

Influence of growth conditions on the As antisites, As_Ga ⁰ and As_Ga⁺ concentrations in the low temperature GaAs MBE growth: A first theoretical study

227

Influence of growth conditions on the optical gain of 1.3 μm (GaIn)(NAs)/GaAs lasers

228

Influence of growth conditions on the structural, optical and electrical quality of MBE grown InAlAs/InGaAs metamorphic HEMTs on GaAs

229

Influence of growth conditions on the threshold current density of double-heterostructure lasers prepared by molecular-beam epitaxy

230

Influence of growth factor on internalization pathway of quantum dots into cells: PDGF effects internalization of QDs

231

Influence of Growth Field on NiFe, Fe $_3$ O $_4$ , and NiFe/Cr/Fe

Influence of growth interruptions at AlSb/InAs interfaces on the atomic morphology and electron transport properties

233

Influence of growth interruptions on the interface properties of InAs_xP_1-x/InP heterostructures grown by chemical beam epitaxy

234

Influence of growth paramaters on the crystallinity and stress of SiGe films grown by LPCVD

235

Influence of growth parameters on gray-track formation in Gd_xY_1-xCa₄O(BO₃)₃

236

Influence of growth rate and temperature on InP/GaInAs interface structure analyzed by X-ray CTR scattering measurement

237

Influence of growth rate on MBE surface phase diagrams

238

Influence of growth temperature and composition on structural disorder in YBCO thin films

239

Influence of growth temperature and V/III ratio on Au-assisted InxGa1−xAs nanowires

240

Influence of growth temperature on carrier recombination in GaInNAs-based lasers

241

Influence of growth temperature on defect density in 1.3μm GaInNAs-based lasers

242

Influence of Growth Temperature on Microstructure and Superconducting Properties of ${\\rm ErBa}_{2}{\\rm Cu}_{3}{\\rm O}_{7-\\delta }$ Films With $_{0.5 + x}$ Pr $_{0.5}$ Fe

Influence of H2 Partial Pressure on Sputtered TbFeCo Films

257

Influence of H2O molecules on electrical tree initiation in silicone rubber

258

Influence of H₂ loading on the kinetics of Type IIA fibre Bragg grating photoinscription

259

Influence of H2S annealing and buffer layer on CZTS solar cells sputtered from a quaternary compound target

260

Influence of H62, H96 brass electrode materials on self-breakdown voltage deviation of a gas switch

261

Influence of hafnium in the formation of erbium and hafnium doped bulk periodic poled lithium niobate crystals by the off-centred Czochralski technique

262

Influence of Halloysite nanotubes in low-density polyethylene on electric polarization

263

Influence of HALO implantation on analog performance and comparison between bulk, partially-depleted and fully-depleted MOSFETs

264

Influence of hand tremor for 60-GHz-band broadband wireless communication terminal based on advanced kiosk model

265

Influence of hand-off algorithms on the performance of cellular radio networks

266

Influence of handover mechanisms and transmission delay difference on SFN gain

267

Influence of hanging load on induction machine torque and stator current in hoisting winch system

268

Influence of Hangover and Hangbefore Criteria on Automatic Speech Recognition

269

Influence of hard bubble suppression layer on gate operation in Bloch line memory

270

Influence of hardened layer structure and coating-substrate interface geometry on plastic deformation pattern of structural steels at mesolevel

271

Influence of hardware parameters on the performance of future indoor THz communication systems under realistic propagation conditions

272

Influence of hardware parameters on the performance of future indoor THz communication systems under realistic propagation conditions

273

Influence of harmonic AC voltage on surface discharge formation in transformer insulation

274

Influence of harmonic components on electromagnetic vibration for a permanent magnet motor

275

Influence of harmonic currents on cable losses for different grid configurations

276

Influence of harmonic distortions of driving signal on the measurement of Mach-Zehnder modulator parameters

277

Influence of harmonic injections on the performance of certain analog and digital protection and regulation equipment

278

Influence of harmonic on rotor dynamic performance of large submersible motors in state of sub-critical speed

279

Influence of Harmonic System Voltages on the Harmonic Current Emission of Photovoltaic Inverters

280

Influence of harmonic voltage distortion on asynchronous generators

281

Influence of harmonic voltages on single line to ground faults in distribution networks with isolated neutral or resonant earthing

282

Influence of harmonics in system voltage on metal oxide surge arrester diagnostics

283

Influence of harmonics in the magnetic field under consideration of current cell models

284

Influence of harmonics on AC measurements using a quantum voltmeter

285

Influence of harmonics on power distribution system protection

286

Influence of harmonics on the efficiency of a piezoelectric transformer

287

Influence of harmonics on traction transformers losses

288

Influence of HARQ with Unreliable Feedback on the Throughput of UMTS LTE

289

Influence of HBr-additives on Cu and CuBr vapor laser performances

290

Influence of HDR reference on observers preference in tone-mapped images evaluation

291

Influence of He Gas Flow Rate on Optical Emission Characteristics in Atmospheric Dielectric-Barrier-Discharge Plasma Jet

292

Influence of HE11 mode on direct wave in singlehole borehole radar

293

Influence of Head Fields and Media Properties on Transitions of Magnetization Reversals on Thin Film Disk

294

Influence of head tissue conductivity in forward and inverse magnetoencephalographic Simulations using realistic head models

295

Influence of header compression on link layer adaptation in IEEE 802.11b

296

Influence of heart rate variability in healthy subjects with respiratory manipulation

297

Influence of heat flux on the accuracy of hydrodynamic models for ultra-short Si MOSFETs

298

Influence of heat sink mounting procedure on package reliability

299

Influence of Heat Source, Thermal Radiation, and Inclined Magnetic Field on Peristaltic Flow of a Hyperbolic Tangent Nanofluid in a Tapered Asymmetric Channel

300

Influence of heat treatment and chemical composition on the magnetic properties of ferromagnetic steels

301

Influence of heat treatment and coating on magnetic loss of amorphous Fe/sub 80.5/B/sub 12/Si/sub 6.5/C/sub 1/ alloys

302

Influence of heat treatment in atmosphere on surface flashover characteristics of alumina in vacuum

303

Influence of heat treatment on CH₄ sensing characteristics of K-, Ca-, Mg-doped SnO₂ sensors

304

Influence Of Heat Treatment On Magnetic And Structural Properties Of Garnet Films

305

Influence of heat treatment on magnetic properties of steel sheet material for cable routing system

306

Influence of heat treatment on properties of high-current metallized film capacitors

307

Influence of Heat Treatment on Superconductivity of MgB $_{2}$ Bulk Sintered in Flowing Welding Grade Ar Atmosphere

308

Influence of heat treatment on the properties of MgO thin films as dielectric layer

309

Influence of heat treatment strain parameters on the structure and J_c of Nb-48.5 wt.% Ti superconductor

310

Influence of heat treatment temperature on the electro-catalytic behaviour of nanostructure RuO₂-TiO2 coating for the chlorine evolution reaction

311

Influence of heat treatments and ionizing irradiations on the charge distribution and the number of surface states in the Si-SiO2system

312

Influence of heating and dipping technique on the morphology and second-order nonlinear optical efficiency of anisotropic thin films

313

Influence of heating and voltage drop restrictions on starting process of thyristor voltage converter - Induction motor system

314

Influence of heating on dielectric relaxation phenomena of electron beam irradiated PEEK

315

Influence of heating system kind on a microclimate quality

316

Influence of heating temperature on electrical photoconductivity of nanocomposited polymer-Tio2 thin films for organic photovoltaic

317

Influence of heat-source temperature on convection-based tilt sensor output

318

Influence of heat-treatment conditions on the electrical conduction mechanism of grain-boundary in cobalt ferrites

319

Influence Of Heat-treatment Conditions On the Eletrical Conduction Mechanism Of Grain And Grain Boundary In Cobalt Ferrites

320

Influence of heat-treatment of traps examined by using the thermally stimutated current and the dielectric characteristics of carbon-black-filled polyimide film

321

Influence of heavily doped contacts on photoconductive switch properties

322

Influence of heavy doping effects on the fT prediction of transistors

323

Influence of Heavy Ion Irradiation on Perpendicular-Anisotropy CoFeB-MgO Magnetic Tunnel Junctions

324

Influence of heavy ion irradiation on perpendicular-anisotropy CoFeB-MgO magnetic tunnel junctions

325

Influence of Hedge Pruning Returning on Soil CO2 Flux in Subtropical China

326

Influence of helix parameters on the reflectance of microwave by chiral composites

327

Influence of HEMP electromagnetic distribution on various plasma

328

Influence of heparin, heparin plus aprotinin and hirudin on contact activation in a cardiopulmonary bypass model

329

Influence of heterogeneities on ultrasound attenuation for liver steatosis evaluation (CAP™): Relevance of a liver guidance tool

330

Influence of heterogeneity of driving behavior under exceptional event on network performance by simulations

331

Influence of heterogeneity solid dielectrics on time up to breakdown

332

Influence of heterogeneous external fields on propagation of bulk acoustic waves in crystals

333

Influence of Heterogeneous Soils and Clutter on the Performance of Ground-Penetrating Radar for Landmine Detection

334

Influence of HEVC compression on event detection in security video sequences

335

Influence of hexadecimal character and decimal character for power waveform data compression

336

Influence of HF powerful radio waves on the ozone number density in the earth´s atmosphere

337

Influence of high channel doping on the inversion layer electron mobility in strained silicon n-MOSFETs

338

Influence of High Current Load on Electrical Properties of Adhesive Conductive Joints

339

Influence of high DC electrical fields on some aging properties of XLPE

340

Influence of high doping on the design of bipolar transistors

341

Influence of high dose low energy ion implantation on dopant depth profile

342

Influence of high dv/dt switching on a motor drive system: a practical solution to EMI issues

343

Influence of high energy electrons and protons on secondary electron emission of cover glasses for space solar cells

344

Influence of high energy grinding on the texture, structure and electrical properties of barium titanate

345

Influence of high field and molecular effects on some electrical properties of polymers

346

Influence of high fluence neutron irradiation on forward current of semiconductor detectors

347

Influence of High Frequency AC Magnetic Field on Trapped Magnetic Field

348

Influence of high frequency current harmonics on (Smart) energy meters

349

Influence of high frequency current transformers bandwidth on charge evaluation in partial discharge measurements

350

Influence of high frequency electromagnetic waves on cell proliferation

351

Influence of high growth rate on GaAs-based solar cells grown by metalorganic chemical vapor deposition

352

Influence of high loading density charge configurations on performance of electrothermal-chemical (ETC) guns

353

Influence of high magnetic field on the corrosion of carbon steel

354

Influence of high magnitude electromagnetic fields on on-board DC/DC-modules-practical results of testing the modules for telecom applications in GTEM-cell

355

Influence of high noise on the instantaneous frequency estimation using quadratic time-frequency distributions

356

Influence of High Priority Users on the System Capacity of Mobile Networks

357

Influence of high school students’ perceptions on their preparation for engineering

358

Influence of high substrate doping concentration on the hot-carrier and other characteristics of small-geometry CMOS transistors down to the 0.1 /spl mu/m generation

359

Influence of high substrate doping levels on the threshold voltage and the mobility of deep-submicrometer MOSFETs

360

Influence of high temperature on substrate effect of UTBB SOI nMOSFETs

361

Influence of High Temperature Superconducting Transformer Geometry on Leakage Magnetic Field

362

Influence of high valence cations on soft spinel properties

363

Influence of high voltage harmonics on partial discharge patterns

364

Influence of high voltage harmonics on partial discharge patterns modulation

365

Influence of high voltage polarization on impulse strength of choosen solid dielectrics

366

Influence of high voltage static electric field on antioxidant enzymes activity in male rats

367

Influence of high-current-density pulsing annealing on giant magneto-impedance effect in Fe/sub 73.5/Cu₁Nb₃Si/sub 13.5/B/sub 9/ ribbons

368

Influence of higher harmonics in the end region magnetic field on eddy currents in the stator clamping system of hydro generators

369

Influence of higher hydrocarbons and hydrogen sulfide on the process of ethylene synthesis

370

Influence of Higher Operating Temperatures on Motor Design

371

Influence of higher order modes on angled-facet amplifiers

372

Influence of higher order modes on the measurements of complex permittivity and permeability of materials using a microstrip discontinuity

373

Influence of Higher-Order Dispersion in a Femtosecond Kerr-lens Mode-locked Forsterite Laser: Dispersive Wave and Pulse Splitting

374

Influence of High-Frequency Characteristic of a Cavity on the Phase Shift in the Relativistic Klystron Amplifier

375

Influence of High-Frequency Charge–Discharge Cycling Induced by Cell Voltage Equalizers on the Life Performance of Lithium-Ion Cells

376

Influence of high-frequency electrotechnological installations on generation of harmonics in a network

377

Influence of high-frequency high voltage impulse conditioning on inrush current interruption phenomena

378

Influence of high-frequency laser frequency noise on the stability of an optical clock

379

Influence of high-frequency leakage current on motor position control in PWM inverter-fed servo drives

380

Influence of high-frequency loading in DC-link fuses

381

Influence of High-Frequency Near-Field Coupling Between Magnetic Components on EMI Filter Design

382

Influence of high-frequency near-field coupling between magnetic components on EMI filter design

383

Influence of high-level languages on computer design

384

Influence of high-level program structures on branch prediction accuracy

385

Influence of high-optical power light launched into optical fibers in MT connector

386

Influence of high-order modes in starting self-mode-locked optically pumped semiconductor laser

387

Influence of high-permittivity barriers on PD-parameters

388

Influence of high-power EM-videopulse on insulated cells

389

Influence of high-resolution processing on background noise distribution in ship-borne radar

390

Influence of high-voltage polarisation on impulse breakdown of polyethylene and crosslinked polyethylene

391

Influence of highway network construction on ecological service value in Shandong province

392

Influence of highway three-dimensional coordination on drivers´ perception of horizontal curvature and available sight distance

393

Influence of HIGP on ground-reliance to monopole antennas

394

Influence of hip joint axes change of orientation on power distribution in humanoid motion

395

Influence of Ho-Doping on the Electromagnetic Field-Dependent $E$ – $J$ Characteristics of (Bi

396

Influence of Holding Smart Phone for Acceleration-Based Gait Authentication

397

Influence of hole accumulation on the source resistance, kink effect, and on-state breakdown of InP-based HEMTs: light irradiation study

398

Influence of hole shape on the modal characteristics of holey fibres

399

Influence of holes on neutral trap generation

400

Influence of homogeneity of rock material on rockburst based on numerical analysis

401

Influence of homogeneous stress on BAW and SAW propagation in diamond single crystals

402

Influence of Homogenization of Microstructual Composition on Hydrogen Absorption into ${\\rm La}{({\\rm Fe}_{\\rm x}{\\rm Si}_{1-{\\rm x}})}_{13}$ Magnetic Refrigerants

403

Influence of Horizontal Vibrations on the Lateral Stability of Bulk High Temperature Superconductors

404

Influence of horn length on radiation pattern of oblique-flare-angle corrugated horn

405

Influence of host polymer on performance of organic salt-doped P-OLED with ITO/POLYMER:PBD:TBAPF6/Al structure

406

Influence of hot carrier transport on the transient response of an InGaAs/InAlAs metal-semiconductor Schottky diode structure

407

Influence of hot embossed process parameters on biodegradable polymer microstructure for drug delivery

408

Influence Of Hot Isostatic Pressing On The Magnetic Properties Of Melt-spun Sm/sub 2/Fe/sub 17/ N/sub x/ Magnets

409

Influence of hot isostatic pressing on the magnetic properties of melt-spun Sm₂Fe₁₇N_x magnets

410

Influence of hot-carrier stress on the kink/hysteresis behaviour of NMOST´s operating at liquid helium temperatures

411

Influence of H-plane pattern performance of the omnidirectional transmit antenna to the site VSWR result

412

Influence of HRT and temperature on treatment of micro-polluted river water by using integrated horizontal-flow constructed wetland

413

Influence of human absorption of Wi-Fi signal in indoor positioning with Wi-Fi fingerprinting

414

Influence of Human Body Size on Lower Limb Injury Parameters in Car-Pedestrian Collisions

415

Influence of Human Body Temperature on Compressive Mechanical Properties of UHMWPE Acetabular Cup Material

416

Influence of human factors over idea generation: A qualitative and quantitative analysis of an enterprise of the graphic sector in Medellin

417

Influence of human head and hand on PIFA antenna matching properties and SAR

418

Influence of human motion on indoor wireless millimeter-wave channel characteristics

419

Influence of Human Resource on Enterprise Technological Innovation: Organization Incentive and Knowledge Innovation as Mediating Variables

420

Influence of humidity and pollution on the dielectric strength of components used in Isolated LPS

421

Influence of humidity and temperature on the dielectric properties of thermally sprayed ceramic MgAl2O4 coatings

422

Influence of humidity contained in building material on wedge diffraction

423

Influence of humidity exposure time on dielectric properties of insulation material surfaces

424

Influence of humidity on current waveform and light emission of a low-frequency discharge controlled by a dielectric barrier

425

Influence of humidity on flashover in air in the presence of dielectric surfaces

426

Influence of Humidity on Lightning and Switching Impulse Flashover Voltages

427

Influence of humidity on parameters of gold doped tungsten trioxide

428

Influence of humidity on polycrystalline Cu(In,Ga)Se₂ thin films for solar cells: a study of Na and H₂O coadsorption

429

Influence of humidity on reliability of plastic packages

430

Influence of humidity on surface streamer propagation in a uniform field in air

431

Influence of humidity on the breakdown mechanism of medium length rod-plane gaps stressed by positive impulse voltages

432

Influence of humidity on the breakdown of sphere and rod gaps under impulse voltages of short and long wavefronts

433

Influence of humidity on the breakdown voltage of sphere-gaps and uniform-field gaps

434

Influence of humidity on the flashover characteristics of small insulating distances under natural environmental conditions

435

Influence of Humidity on the Measurement of Brillouin Frequency Shift

436

Influence of humidity on the sparkover of rod-rod gaps of several geometrical forms subjected to positive impulse voltages of varying waveshapes

437

Influence of humidity on transmission in a Y-branch thermo-optic switch composed of deuterated fluoromethacrylate polymer waveguides

438

Influence of Humidity on Variation of Ion Mobility with Life Time in Atmospheric Air

439

Influence of Humidity on Variation of Ion Mobility with Life Time in Atmospheric Air

440

Influence of HVDC commutation failure on directional comparison pilot protection of AC system

441

Influence of HVDC control on HVDC reactive power overshoot after large disturbance

442

Influence of HVDC ground electrode current on AC transmission system and development of restraining device

443

Influence of HVDC Ground Electrode Current on AC Transmission System and Its Restraining Measure

444

Influence of hybrid inorganic/organic mesoporous and nanostructured materials on the cephalosporins´ efficacy on different bacterial strains

445

Influence of hybridisation on eco-driving habits using realistic driving cycles

446

Influence of hydraulic turbine operation modes on the hydraulic vibration of pressurized conveyance system in hydropower station

447

Influence of Hydro Plant Design on Regulating and Reserve Response Capacity

448

Influence of Hydro Units´ Generator-to-Turbine Inertia Ratio on Damping of Subsynchronous Oscillations

449

Influence of Hydro Units´ Generator-to-Turbine Inertia Ratio on Damping of Subsynchronous Oscillations

450

Influence of hydrodynamic models on the prediction of submicrometer device characteristics

451

Influence of hydrodynamic models on the simulated characteristics of deep submicron SOI-MOSFETs

452

Influence of hydrogen and helium additives on the output power and efficiency of barium vapour lasers

453

Influence of hydrogen annealing on NBTI performance

454

Influence of Hydrogen Incorporation on the Reliability of Gate Oxide Formed by Using Low-Temperature Plasma Selective Oxidation Applicable to Sub-50-nm W-Polymetal Gate Devices

455

Influence of hydrogen loading on active fibers

456

Influence of hydrogen on magnetic properties of soft magnetic amorphous alloys

457

Influence of hydrogen on magnetic properties of soft magnetic amorphous alloys

458

Influence of hydrogen on optical fiber loss in submarine cables

459

Influence of Hydrogen on Optical Fiber Loss in Submarine Cables

460

Influence of hydrogen on optical properties of LPCVD amorphous silicon films

461

Influence of hydrogen on the current density of Nb3Sn multifilamentary conductors

462

Influence of Hydrogen on the Mechanism of Permanent Passivation of Boron–Oxygen Defects in p-Type Czochralski Silicon

463

Influence of hydrogen on the optical absorption response of GaAs(Ti) films deposited by R.F. sputtering

464

Influence of Hydrogen Permeability of Liner Nitride Film on Program/Erase Endurance of Split-Gate Type Flash EEPROMS

465

Influence of Hydrogen Related Defects on the Qot´ Dit Build-Up Due to Stress and Annealing in the MOS System

466

Influence of hydrogen, boron, and ion energy on the structure of microcrystalline silicon in plasma-assisted chemical vapor deposition

467

Influence of hydrogenated transformer oil on construction materials inside transformer

468

Influence of hydrometeors on InSAR observations

469

Influence of hydrostatic pressure and temperature on the water dielectric strength and on the dynamic pressure wave

470

Influence of hydrostatic pressure on dielectric properties of polyethylene/aluminum oxide nanocomposites

471

Influence of hydrostatic pressure on morphology and final length of creeping discharges over solid/liquid interfaces under impulse voltages

472

Influence of hydrostatic pressure on the characteristics of discharges propagating on solid/liquid insulating interfaces under AC and DC voltages

473

Influence of Hydrothermal Synthesis Conditions and Device Configuration on the Photoresponse of UV Sensors Based on ZnO Nanorods

474

Influence of Hyperfine Structure on Methane-Stabilized Lasers

475

Influence of hysteresis on the behaviour of coupled finite element-electric circuit models

476

Influence of hysteretic behaviour in ferroresonant LCR circuits

477

Influence of I/Q imbalance on multi-level modulated signals interleaved with reference light

478

Influence of IC synthesis on the random pattern testability of parametric bridging faults

479

Influence of ice and ice booms on water flow at semi-closed water areas

480

Influence of ice thickness on SMOS and aquarius brightness temperatures over Antarctica

481

Influence of ICP etching on surface morphology of InP substrates

482

Influence of ICT progress on energy transfer and vehicle-to-grid (V2G) solutions

483

Influence of ID/OD ratio on static and dynamic magnetic properties of toroidal cores

484

Influence of id-od ratio on magnetic properties of toroidal cores

485

Influence of IF-filtering on bit error rate floor in coherent optical DPSK-systems

486

Influence of IF-filtering on bit error rate floor in coherent optical DPSK-systems

487

Influence of IGBT current rating on the thermal cycling lifetime of a power electronic active rectifier in a direct wave energy converter

488

Influence of IGBT-module switching characteristics to radio frequency noise

489

Influence of illumination on MIS capacitances in the strong inversion region

490

Influence of Illumination on the Negative-Bias Stability of Transparent Hafnium–Indium–Zinc Oxide Thin-Film Transistors

491

Influence of illumination on the poling characteristics of lithium niobate crystals

492

Influence of image and exchange-correlation effects on electron transport in nanoscale DG MOSFETs

493

Influence of Image Charge Potential on High Current Field Emitted Electron Flows in a Nano-Diode

494

Influence of image compression on cascade classifier components

495

Influence of image force potential on the shot noise properties of field emitters

496

Influence of image processing operators and optical models used on the quality of depth estimation

497

Influence of image quality on SWT voting-based color reduction method for detecting text in natural scene images

498

Influence of Image Segment Size on Efficiency of SA DCT

499

Influence of image transformations and quality degradations on SURF detector efficiency

500

Influence of Image/Video Compression on Night Vision Based Pedestrian Detection in an Automotive Application

501

Influence of image-force from mask surface on electrons at low energy electron beam lithography

502

Influence of Imaging Condition on Matching Point Detection

503

Influence of imbalance on distortion in optical push-pull frontends

504

Influence of IMC surface geometry and material properties on micro-bump reliability of 3D Chip-on-Chip interconnect technology

505

Influence of IMCs volume ratio in micro-scale solder joints on their mechanical integrity

506

Influence of imidazole catalysts on electrical properties of epoxy resins cured with acid anhydride

507

Influence of immerse time on the properties of zinc oxide nanostructures

508

Influence of Impact Ionization on Operation Efficiency of InN, GaN, AIN LSA-Diodes

509

Influence of impact ionization on the drain conductance in InAs-AlSb quantum well heterostructure field-effect transistors

510

Influence of impact ionization stresses on AlGaAs-InGaAs HEMT performances

511

Influence of impact load on power quality of equipment power system

512

Influence of impact-ionization-induced base current reversal on bipolar transistor parameters

513

Influence of impact-ionization-induced instabilities on the maximum usable output voltage of Si-bipolar transistors

514

Influence of impedance mismatch effects on measurements of unloaded Q factors of transmission mode dielectric resonators

515

Influence of imperfect channel estimation on the global performances of a turbo coded UMTS/TDD system

516

Influence of Implantation Damages and Intrinsic Dislocations on Phosphorus Diffusion in Ge

517

Influence of implantation of a few metal ions on the oxidation behaviour of TiAl at high temperatures

518

Influence of Implantation on the Magneto-Optical Properties of Garnet Surface

519

Influence of implantation temperature on the formation of hydrogen-related defects in InP

520

Influence of impregnating liquids on dielectric response of impregnated cellulose insulation

521

Influence of impregnation temperature and time on the electrical properties of dielectric films

522

Influence of impression management on interpersonal citizenship behavior: Leader-member exchange as a mediator

523

Influence of improper installation on measurement performance of Pitot tube

524

Influence of improved magnetic alloys on design trends of electrical instruments

525

Influence of improved magnetic alloys on design trends of electrical instruments

526

Influence of Improved Magnetic Alloys on Design Trends of Electrical Instruments

527

Influence of impulse frequency on partial discharge under PWM

528

Influence of impulse noise on digital UHF radios in suburban areas

529

Influence of impulse overvoltages and intermitting stationary voltages on the electrical treeing process in polyethylene

530

Influence of impulse voltage waveshape on the flashover of clean and particle-contaminated spacers in SF₆ gas-insulated system

531

Influence of impulse waveshape on breakdown voltage of a nonuniform-field gap in compressed gases

532

Influence of impurities and additives on negative streamers in paraffinic model oil

533

Influence of impurities and additives on positive streamers in paraffinic model oil

534

Influence of impurities in the tribological behaviour and the dielectrical properties of alumina

535

Influence of Impurities on Carrier Removal and Annealing in Neutron-Irradiated Silicon

536

Influence of impurities on electroconvection in insulating liquids

537

Influence of impurities on loss increase in optical fibre

538

Influence of impurities on photocarrier diffusion of high-growth-rate microcrystalline silicon

539

Influence of impurities on the TSDC signal obtained for unsaturated polyester resins

540

Influence of impurity distribution on thermal coefficients of resistivity and piezoresistivity of diffused layers in silicon

541

Influence of Impurity Gas Element in the Sputtering Atmosphere on the Microstructure and the Gmr in Co/cu Multilayers

542

Influence of impurity gas in the sputtering atmosphere on the microstructure and the GMR in Co/Cu multilayers

543

Influence of Impurity Scattering on Spin Injection Efficiency at a Ferromagnet/Semiconductor Quantum Wire Interface

544

Influence of impurity scattering on the conductance anomalies of quantum point contacts with lateral spin-orbit coupling

545

Influence of inaccuracies in machine parameters on field-weakening performance of PM brushless AC drives

546

Influence of Incidence Angle on the Coherent Copolar Polarimetric Response of Rice at X-Band

547

Influence of Incity River Sediment Dredging to Endogenous Release

548

Influence of inclination angles for antennas buried in Arctic terrain on space wave radiation

549

Influence of inclined surfaces on Rayleigh velocities in acoustic microscopy

550

Influence of inclining angle of a slope to optimal locomotion curves of a snake-like robot

551

Influence of inclusions on domain-wall motion and power loss in oriented electrical steel

552

Influence of Incomplete Linkage between Marked and Functional Gene on Estimating Gene Effect by Molecular Marker Regression Model

553

Influence of increasing deposition temperature on opto-electrical properties of amorphous carbon thin film

554

Influence of incremental redundancy on the performance of TCP in enhanced general packet radio service

555

Influence of Independent Towers and Transmission Lines on Lightning Return Stroke Current and Associated Fields

556

Influence of index depressions in active large pitch fibers

557

Influence of indium and zinc oxide nano-particles on properties of SAC0307-xIn-yZnO lead-free solder paste

558

Influence of indium on microstructure and creep properties of SnAg3.5InX (X=0,2,4,8) solder alloys

559

Influence of induced defects on the ultra thin film growth by low energy ion beam deposition

560

Influence of inductance on position signal estimation of SynRM for different winding connection

561

Influence of inductance on the arc evolution in AgMeO electrical contacts

562

Influence of induction motor modelling for undervoltage load shedding studies

563

Influence of Inductive Coupling between Leads on Ground Impedance Measurements Using the Fall-of-Potential Method

564

Influence of inductive coupling between leads on ground impedance measurements using the fall-of-potential method

565

Influence of inductive coupling between leads on resistivity measurements in multilayer soils

566

Influence of inductive filtering method on harmonic transfer characteristic of HVDC transmission system

567

Influence of inductive voltage transformers on the measurement of switching transients

568

Influence of industrial dust on electric strength of high voltage insulating gaps

569

Influence of inert materials on the pollution flashover voltage of porcelain insulators

570

Influence of inertial parameters on the positional accuracy of a robot

571

Influence of InfiniBand FDR on the performance of remote GPU virtualization

572

Influence of Influent C/N Ratio and Aeration Rate on the Nitrogen Removal in an Airlift Combined Biofilm Reactor (ACBR)

573

Influence of influent pH value on nitrite accumulation in a biological aerated filter (BAF)

574

Influence of information aging in self organizing joint radio resource management systems

575

Influence of information and communication technology on education of nurses

576

Influence of information flow topology on closed-loop stability of vehicle platoon with rigid formation

577

Influence of information leakage in analog memory on learning Kohonen network on silicon

578

Influence of information search cost on technology transfer based on multi-agent system

579

Influence of Information Technology on Information Resource Management Education

580

Influence of information technology on military radar systems

581

Influence of infrared illumination on precision measurements of the integer quantum Hall effect

582

Influence of infrared illumination on the accuracy of the quantized Hall resistance

583

Influence of infrared illumination on the characteristics of CdZnTe detectors

584

Influence of InGaN channel thickness on electrical characteristics of AlGaN/InGaN/GaN HFETs

585

Influence of InGaN/GaN/Si electroluminescent heterostructure design and quantum well thickness on their luminescent and laser properties

586

Influence of InGaP and AlGaAs Schottky Layers on ESD Robustness in GaAs pHEMTs

587

Influence of inhibitor and oil components on copper sulfide deposition on kraft paper in oil-immersed insulation

588

Influence of Inhomogeneities in a Stratified Ground on the Field of a Circular Loop Antenna

589

Influence of inhomogeneous current distribution on the thermal SOA of integrated DMOS transistors

590

Influence of inhomogeneous injection on sidemode suppression in strongly coupled DFB semiconductor lasers

591

Influence of Inhomogeneous Superconducting Properties of YBCO Thin Film on Current Limiting Characteristics

592

Influence of initial and boundary discharge conditions on soft X-ray amplification in the fast gas-filled-capillary discharge

593

Influence of initial concentration of chlorpyrifos in aquatic environment on removal by softstem bullrush (Scirpus tabernaemontani Gmel.)

594

Influence of initial conditions on capillary discharge device Capex 2

595

Influence of initial growth layer and Ti underlayer on magnetic properties and recording characteristics of very thin films of evaporated Co-Cr media

596

Influence of initial profile approximation on volt-amp diagrams of tunnel-resonance diode

597

Influence of initial resistance on gain of short-term systemic autoregulation

598

Influence of Initial Silicon Defects on Processes of the Dioxide Silicon Defect Formation

599

Influence of initial stresses on resonance properties of FBAR

600

Influence of initial voltage step on residual AC breakdown voltage of XLPE power cables after accelerated water immersion aging test

601

Influence of initial wafer cleanliness on metal removal efficiency in immersion SC-1 cleaning: limitation of immersion-type wet cleaning

602

Influence of initialisation and stop criteria on HMM based recognisers

603

Influence of initialization method on competitive active contours segmentation

604

Influence of injected plasma on oscillations of cathode luminosity in triggered vacuum breakdown

605

Influence of injection speed of contrast agent on perfusion analysis using fast bolus method

606

Influence of injection-current noise on the spectral characteristics of semiconductor lasers

607

Influence of Injector Doping Concentration on the Performance of InP-Based Quantum-Cascade Lasers

608

Influence of inlet area on thermal natural ventilation in rooms

609

Influence of inlet pressure and mass flow rate on the temperature rise of superconducting strands in SSTF under the normal operating conditions [of KSTAR]

610

Influence of Inner Skin- and Proximity Effects on Conduction in Litz Wires

611

Influence of inner transistors working modes on DGMOSFET 1/f noise

612

Influence of Inorganic Fillers on the Voltage Endurance of Solid Dielectric Power Cables

613

Influence of inorganic gel on BHCs adsorption distribution in groundwater

614

Influence of inorganic nano-filler to partial discharge of polyimide film under high-frequency impulses

615

Influence of Inorganic Salts on Cadmium Adsorption By Montmorillonite and Illite in Alkaline Conditions

616

Influence of InP cap layer on photo-responsivity of InP/InGaAs PIN detector

617

Influence of InP source/drain layers upon the DC characteristics of InAs/InGaAs MOSFETs

618

Influence of in-plane anisotropy and eddy currents on the frequency spectra of the complex permeability of amorphous CoZr thin films

619

Influence of input flow character on network dimensioning

620

Influence of input supply voltage unbalances on the performance of AC/DC buck rectifiers

621

Influence of Input Terrain Profile Resolution on Diffraction Modeling

622

Influence of input voltage swing on 0.18 μm NMOS aging estimated by self-stressing testers

623

Influence of Inputs in Modelling by Backpropagation Neural Networks

624

Influence of Insert Structure on Hollow Cathode Discharge Characteristics

625

Influence of in-situ surface treatment of Ir electrode before metal-organic chemical vapor deposition of Pb(Zr0.2, Ti0.8)O3 thin films in the self-regulation window

626

Influence of insonification angle on echogenicity of B-mode images of atherosclerotic plaque in vitro

627

Influence of installation angle of electromagnetic flowmeter on measurement accuracy

628

Influence of instantaneous end effects on attractive levitation force at standstill of combined-levitation-and-propulsion SLIM

629

Influence of instantaneous mode competition on the dynamics of semiconductor lasers

630

Influence of institutional conditions on efficiency of energy use

631

Influence of instructional systems development (ISD) on simulator design

632

Influence of instrument transformers on harmonic distortion assessment

633

Influence of Instrument Transformers on Quality of Electrical Power and Energy Measurement

634

Influence of Instruments Bandwidth in the Power Amplifier Linearization Process

635

Influence of insulating barrier on the creepage discharge in transformer oil

636

Influence of insulating barriers on positive long air gaps in divergent field

637

Influence of insulating coatings on the electrical conduction of cyclohexane

638

Influence of insulating electrode coatings on the electrical conduction of cyclohexane

639

Influence of insulating films on conduction

640

Influence of insulating oil on space charge formation and electrical threshold in polycarbonate with inorganic filler

641

Influence of insulating paper formation on the dielectric and tensile breakdown of oil-impregnated paper

642

Influence of insulating spacer type on propagation properties of PD-induced electromagnetic wave in GIS

643

Influence of insulation barrier on AC flashover voltage with and without grounded back electrode in air

644

Influence of insulation for implanted antennas

645

Influence of insulation layers on the high-frequency properties of coplanar waveguides on Si

646

Influence of insulation morphology, impurities and oxidation on cables electric properties

647

Influence of insulation morphology, impurities and oxidation on some electric properties of cables

648

Influence of insulation paper degradation on economical operation period of power transformers

649

Influence of insulation properties on steady normal-zone velocity inside superconducting magnet

650

Influence of insulation thickness on the electric Properties of unfilled µm-sized thermosets

651

Influence of Insulator Length on the Downstream Electron Temperature and Density in the Coaxial Plasma Focus Device

652

Influence of insulator length on the downstream electron temperature and electron density in the coaxial electrode of plasma focus device

653

Influence of insulator length on the electron temperature in the coaxial electrode of Plasma focus device

654

Influence of insulator profile on streamer propagation

655

Influence of insulator string positioning on AC icing flashover performance

656

Influence of insulators on R/W process in laminated film heads

657

Influence Of Insulators On R/w Process In Laminated Films Heads

658

Influence of Intellectual Capital on Independent Innovation: A Survey in Chongqing of China

659

Influence of Intellectual Property Construction for Pledge Financing in Small and Medium-Sized Enterprises

660

Influence of Intense Pulsed UV Irradiation on the Viability and Proliferation of HeLa Cells

661

Influence of intensity modulation produced by LD direct modulation on transmission characteristics of CPFSK differential detection system

662

Influence of intensity-dependent fields on nonlinear couplers

663

Influence of intentionally strained sapphire substrate on GaN epilayers

664

Influence of inter area transfer capacity on the regional power system planning

665

Influence of Inter Carrier Interference on Link Adaptation Algorithms in OFDM Systems

666

Influence of interactions with non-condensed particles on the coherence of a 1D polariton condensate

667

Influence of Interactive Television on Electronic Commerce

668

Influence of interbar currents on the harmonic losses and skew in cage induction machines

669

Influence of inter-bit four-wave mixing in optical TDM transmission

670

Influence of intercell coupling of left-handed leaky wave omni-directional antenna

671

Influence of interchannel spacing on the dynamical properties of multichannel quartz crystal microbalance

672

Influence of Interconnect Parasitics on the Lateral Scaling of SiGe Power HBTs

673

Influence of interconnection surface finishes on quality of adhesive joints

674

Influence of interconnections onto the breakdown voltage of planar high-voltage p-n junctions

675

Influence of inter-electrode distance on EMG

676

Influence of interface chemistry on dielectric properties of epoxy/alumina nanocomposites

677

Influence of interface effect on the ferroelectric and ferromagnetic properties of CFO/PMNT multilayered thin films

678

Influence of interface fractal geometry on anamalous behaviour of capacity-voltage characteristic of metal-semiconductor contacts with Shottky barrier

679

Influence of interface fractal geometry on anomalous behaviour of volt-ampere characteristic of metal-semiconductor contacts with Shottky barrier

680

Influence of interface on the dielectric response, electrical and thermal conductivity of high density polyethylene based composites

681

Influence of interface on the electrical properties of polyimide/TiO₂ composite films

682

Influence of interface reactions on the YBCO films grown by fluorine-free solution route

683

Influence of interface roughness and heterogeneities on the waveguide inversion of dispersive GPR data

684

Influence of Interface Roughness, Film Texture, and Magnetic Anisotropy on Exchange Bias in $[{\hbox{Pt/Co}}]_{3}/{\hbox{IrMn}}$ and ${\hbox{IrMn}}/[{\hbox{Co/Pt}}]_{3

685

Influence of interface states on C-V characteristics of AlGaN/GaN heterostructures

686

Influence of interface states on the capacitance of homo- and heterojunctions

687

Influence of interface states on the charge injection in m.n.o.s. memory devices

688

Influence Of Interface Structure On Chemical Etching Process For Air Gap Of Microelectromechanical System Based On Surface Micromachining

689

Influence of Interface Textures on Light Management in Thin-Film Silicon Solar Cells With Intermediate Reflector

690

Influence of interface trap states and quantum mechanical effects on the drain current of In0.53Ga0.47As MOSFETs

691

Influence of interface traps and surface mobility degradation on scanning capacitance microscopy measurement

692

Influence of interface traps on high-mobility channel performance

693

Influence of interface traps on the performance of Tunnel FETs

694

Influence of Interface Traps on the Temperature Sensitivity of MOSFET Drain-Current Variations

695

Influence of interface/interphase on the dielectric properties of composites

696

Influence of interfaces on the crystallization characteristics of Ge₂Sb₂Te₅

697

Influence of interfacial chemistry and molecular length on the electronic properties of metal-molecule-silicon junctions produced by flip chip lamination

698

Influence of Interfacial Compliance on Thermomechanical Stresses in Multilayered Microelectronic Packaging

699

Influence of interfacial condition between film and lower electrode on space charge measurement

700

Influence of interfacial delamination on temperature distribution of QFN packages

701

Influence of interfacial Dzyaloshinskii-Moriya interaction on parametric amplification of spin waves in ultrathin magnetic films

702

Influence of interfacial exchange coupling on microwave permeability in exchange coupled CoFe/MnIr bilayers

703

Influence of interfacial phenomena on conduction and breakdown in a thin dielectric liquid layer

704

Influence of interfacial structure on electrical properties of metal/Ge Schottky contacts

705

Influence of Interference Contrast on Function of Fiber - Optic Interferometric Sensors

706

Influence of interference in MIMO power line communication systems

707

Influence of interference noise in connection with 40 Gb/s add and drop multiplexing of OTDM signals

708

Influence of Interference on Range Estimation in Noise Radar Systems

709

Influence of interference originating from power systems and loads on electric power customers

710

Influence of interference type upon adaptive GNSS antenna array performance

711

Influence of Interference with Moving Terminal in Wireless LAN Environment and Evaluation of Behavior of QoS-TCP

712

Influence of interferometric cross talk in a cascade of 10-Gbit/s wavelength routers and an improved Gaussian cross talk model

713

Influence of Inter-Layer Contact Resistances on Quench Propagation in ${\\rm YBa}_{2}{\\rm Cu}_{3}{\\rm O}_{\\rm x}$ Coated Conductors

714

Influence of Interlayer Coupling on Current-Induced Domain Wall Motion in Multilayered Nanowires

715

Influence of Interlayer Interfaces on Exchange Coupling Efficiency in Multilayer Magnetoresistive Films With Fe₅₀Mn₅₀ Layers

716

Influence of Interlayer Separation on Magnetic Shielding Properties of 2G HTS Sheets Made of 46 mm Wide RABiTS Tape

717

Influence of Interlayer Thickness on High-Frequency Magnetic Properties of FeCoSiN/AlO/FeCoSiN Trilayers

718

Influence of interleaver on minimum turbo code distance

719

Influence of inter-line faults on distance protection in parallel lines

720

Influence of Intermediate Layer on Magnetic Properties of $L1_{0}$ Ordered FePt Perpendicular Recording Media

721

Influence of intermediate layers on coercive force of laminated Co-P films

722

Influence of intermediate layers on the magnetic properties of thin electrolytically prepared Co-P films

723

Influence of intermediated Ag layer on formation of L10(FePt) phase in nanodimensional Fe50Pt50/Ag/Fe50Pt50 film compositions on oxided silicon single-crystal substrate

724

Influence of intermetallic compound on the stress distribution and fatigue life of halogen-free printed circuit board assembly

725

Influence of intermetallic compounds growth on properties of lead-free solder joints

726

Influence of intermetallic compounds on tensile strength of lead-free solder

727

Influence of Intermetallic Phases on Reliability in Thermosonic Au-Al Wire Bonding

728

Influence of Intermetallic Properties on Reliability of Lead-Free Flip-Chip Solder Joints

729

Influence of intermittent compression cuff design on calf deformation: computational results

730

Influence of intermittent compression cuff design on interface pressure and calf deformation: experimental results

731

Influence of intermolecular energy transfer on the photolysis of azide group in azidobenzenesulphonamides

732

Influence of Intermolecular Force on the Head-Disk Interface of HDD with High Recording Density

733

Influence of internal discharges in a cavity within polymeric insulating material caused by partial discharge mechanisms

734

Influence of internal heat source on double-diffusive soret induced convection in a binary fluid

735

Influence of Internal Magnetic Field Distribution on Critical Currents in a Single and Assembled Bi-2223 Tapes

736

Influence of internal mechanical stress and strain on electrical performance of polyethylene electrical treeing resistance

737

Influence of internal residual mechanical stresses on local dielectric strength of EHV extruded XLPE cables

738

Influence of internal stress and strain on electrical treeing in XLPE

739

Influence of internal stress surface distribution on accuracy of surface acoustic wave devices

740

Influence of Internal Vacua and Ionization on the Life of Paper Insulated High-Tension Cables

741

Influence of internal vacua and ionization on the life of paper insulated high-tension cables

742

Influence of internal vibration modes on the stability of haptic rendering

743

Influence of Internet Violence on Adolescents and Its Preventive Strategies

744

Influence of internuclear interaction on the charge transfer differential cross section

745

Influence of interparticle interaction anisotropy on structural nd kinetic properties of the dust system in plasma

746

Influence of interphase interference on resistive leakage current of MOA

747

Influence of interphase interference to on-line leakage current monitoring of MOA

748

Influence of inter-quantum-well coulomb interaction on gain spectra of InGaN/GaN MQW structures

749

Influence of interrupted current amplitude on the post-arc current and gap recovery after current zero-experiment and simulation

750

Influence of interrupted current amplitude on the residual current and gap recovery after current zero

751

Influence of Interrupting Buried Layers and Ring-Loops on Electromagnetic Coupling in RFICs

752

Influence of intersecting angles of strands on contact resistance in cable-in-conduit conductors

753

Influence of inter-stimulus interval on auditory evoked potentials

754

Influence of interstitial impurities on the magnetic properties of pure iron

755

Influence of interstitial oxygen on the c-axis orientation of sputtered and e-beam evaporated ZnO thin films

756

Influence of interstrand current redistribution on acceleration of quench propagation in eight-strand Rutherford cables

757

Influence of inter-strand electrical and thermal conductivity on stability of Rutherford cables in accelerator magnets

758

Influence of interstripe gain on crosscoupled-mode operation in twin-stripe lasers

759

Influence of intersymbolical interference and mutual modulation noise on digital signals with frequency coding

760

Influence of Intrachannel Crosstalk With Frequency Dependence on Signal Degradation in Optical Switch Network

761

Influence of intra-ensemble energy transfer on the properties of nanocrystal quantum dot structures and devices

762

Influence of intraluminal thrombus topology on AAA passive mechanics

763

Influence of intra-network interference on quality of service in wireless LANs

764

Influence of Intrinsic Gettering on Silicon Recombination Properties and their Relation to Device Performance

765

Influence of in-vehicle music on driving: experimental results with a driving simulator

766

Influence of In-Vehicle Real-Time Traffic Safety Warning Information on Driving Stability at Limited Signal Visibility Approaches: Use of an Ordered Probit Model

767

Influence of inverse coupled inductors on fault-tolerant operation of two-phase DC-DC converters

768

Influence of Inversion Layer on Tunneling Field-Effect Transistors

769

Influence of inverter control logics on energetic performances of PV modules - Inverter systems

770

Influence of inverter design and control on the energy consumption of electric locomotives

771

Influence of Inverter Loads on the Airgap Flux of Aerospace Homopolar Alternators

772

Influence of inverter nonlinearity on parameter estimation in permanent magnet synchronous machines

773

Influence of inverter output cable and filters on conducted emission

774

Influence of Inverter Output Filter on Maximum Torque and Speed of PMSM Drives

775

Influence of Inverter Output Filter on Maximum Torque and Speed of PMSM Drives

776

Influence of Inverter Output Filter on the Selection of PWM Technique

777

Influence of inverter-based distributed generator interface control on the performance of power distribution systems

778

Influence of inverter-nonlinearity and measurement setup on zero speed sensorless control of AC machines based on voltage pulse injection

779

Influence of In-Wheel Motor Structure about the Contact and Comfort for Electric Vehicle

780

Influence of ion admixture on dynamics of electrooptical response of PDNLC films

781

Influence of ion beam cleaning on properties of HfO2 thin films

782

Influence of ion beam energy on SEGR failure thresholds of vertical power MOSFETs

783

Influence of ion beam milling parameters on MRAM switching

784

Influence of Ion Bombardment on Electron Emission of MgO Surface in AC Plasma Display Panel

785

Influence of ion bombardment on microcrystalline silicon material quality and solar cell performances

786

Influence of ion channel on electron beam propagation

787

Influence of ion concentration in aqueous solution on sterilization of E. coli by high electric field pulse

788

Influence of ion current on current transfomers of AC systems in near vicinity of DC systems

789

Influence of ion dosage on exchange field and GMR of irradiated PtMn-based spin valves

790

Influence of ion dose on nanostructure morphology and electrical properties of nitrogen implanted-annealed copper

791

Influence of ion effects on a space charge limited field emission flow: From non-relativistic to ultra-relativistic regimes

792

Influence of ion effects on a space charge limited field emission flow: From non-relativistic to ultra-relativistic regimes

793

Influence of ion effects on field-emission-limited diodes

794

Influence of ion effects on relativistic field-emission-limited diodes

795

Influence of ion implantation on magnetic properties of crystalline nickel and amorphous Fe-B ribbons

796

Influence of ion implantation on magnetostatic volume wave propagation

797

Influence of ion implantation on permeability disaccommodation and magnetic losses of cobalt

798

Influence of ion implantation on the ferroelectric properties of Pb(Zr,Ti)O₃ films

799

Influence of ion irradiation on the exchange bias effect

800

Influence of ion pairing on impurity profiles in double diffused silicon devices

801

Influence of ion transport on liquid crystal switching

802

Influence of ionic impurities on the AC breakdown and its frequency dependence in the polymer thin film

803

Influence of ionic migration induced by heat treatment on the Faraday rotation of PrxY3-xGayFe5-yO12garnets

804

Influence of ionic size to the pulse responses of semiconducting polymer/electrolyte hetero-junctions

805

Influence of ionising irradiation on the channel mobility of MOS transistors

806

Influence of ionising radiation on intelligent electronic implantable devices

807

Influence of Ionized Impurities in Silicon Nanowire MOS Transistors

808

Influence of ionizing radiation on electric characteristics of power n-MOSFETS

809

Influence of Ionizing Radiation on Short-Channel Effects in Low-Doped Multi-Gate MOSFETs

810

Influence of ionizing radiation on spectroscopic properties of chromium doped forsterite laser crystals

811

Influence of ionosphere on resolution cell of HF hybrid sky-surface wave radar

812

Influence of ionosphere on SCR of HF hybrid sky-surface wave radar

813

Influence of ionotropic receptor location on their dynamics at glutamatergic synapses

814

Influence of ionotropic receptors localization on glutamatergic synaptic response to paired-pulse stimulation protocol

815

Influence of ions on the growth of water trees

816

Influence of Iron Oxide Nanoparticles on Innate and Genetically Modified Secretion Profiles of Mesenchymal Stem Cells

817

Influence of Irons on Magnetic Field Characteristics of Vacuum Interrupter with Cup type Axial Magnetic Field Contacts

818

Influence of Irradiation and Annealing on Structural Properties of the Optical Fiber Cladding Material

819

Influence of irradiation on electrical properties of conducting polymer

820

Influence of irradiation on impulse breakdown of sphere gaps and sphere-rod gaps

821

Influence of irradiation on the thermally stimulated depolarization currents of polyimide films

822

Influence of irregularities within electric fields in high voltage cables

823

Influence of Irrigation Water-Saving on Groundwater Table in the Downstream Irrigation Districts of Yellow River

824

Influence of ischemia and reperfusion duration on left ventricular depolarization in isolated rabbit hearts registered by optical method

825

Influence of ischemic and infarcted tissue on the surface potential

826

Influence of isochronal annealing on the evolution of hole traps in GaAsN epilayers grown by metalorganic chemical vapor deposition

827

Influence Of Isolation On Interference In Bioelectric Recordings

828

Influence of isolation transformer leakage inductance on constant current output of Class D series-parallel LCC-type resonant converter for light-emitting diode lighting application

829

Influence of isometric voluntary contraction on time and frequency domain parameters of surface EMG

830

Influence of isotropic skull models on EEG source localization

831

Influence of Iterative relaxed median filter over FCM clustering in MR images

832

Influence of java on software engineering education

833

Influence of Jitter on Limit Cycles in Bang-Bang Clock and Data Recovery Circuits

834

Influence of Job Satisfaction on Performance Levels among Employees in a Multi-Lingual Diverse Cultural Society -An empirical study among employees in India

835

Influence of Joint Action of Fluid Shear Stress and Signal Transduction Ligand Inhibitor on Osteoclasts´ Differentiation and Maturation

836

Influence of Joint Angle on EMG-Torque Model During Constant-Posture, Torque-Varying Contractions

837

Influence of joint angle on the calibration and performance of EMG amplitude estimators

838

Influence of joint flexibility in the adjustment of impedance controller parameters

839

Influence of joule heating on current filaments induced by avalanche injection

840

Influence of junction capacitance of switching devices on Class E rectifier

841

Influence of junction capacitance on SRAM SEU performance [MOSFETs]

842

Influence of junction roughness on solar-cell characteristics

843

Influence of k - p formalisms on the band structure of In/sub x/Ga/sub 1-x/As/sub 1-y/N/sub y//GaAs quantum well

844

Influence of K¹⁺/La³⁺ co-modification on domain evolution and electrically-induced strains in lead zirconate titanate ferroelectric ceramics

845

Influence of kaolin ignition temperature changes on the strength qualities of proppants

846

Influence of Kerr-effect on long-span optical transmission

847

Influence of Keyboard Difference on Personal Identification by Keystroke Dynamics in Japanese Free Text Typing

848

Influence of kinetic effects on the resonance behavior of the impedance probe

849

Influence of kink effect on the dynamic and noise performance of short-channel InAlAs/InGaAs HEMTs

850

Influence of knitting techniques on ESD performances

851

Influence of knowledge management system on organization effectiveness in Macedonian organization

852

Influence of krypton gas admixture on plasma focus deuterium fusion

853

Influence of KTP length on the performance intracavity frequency doubled diode-pumped Nd:YVO₄ lasers

854

Influence of La doping on the structural and optical properties of ZnO nanorods

855

Influence of La-doping of YBa₂Cu₃O₇ on transport properties of interface-engineered ramp-edge junctions

856

Influence of lamination orientation and stacking on magnetic characteristics of grain-oriented silicon steel laminations

857

Influence of land use patterns on soil organic carbon decomposition and carbon pools in karst areas of Guilin, China

858

Influence of Land Use Variation along Rail Transit Lines on the Ridership Demand

859

Influence of land-cover category on brightness temperature of snow

860

Influence of language models and candidate set size on contextual post-processing for Chinese script recognition

861

Influence of LaNiO₃ Buffer Layer on the Magnetic Properties of Thin Perovskite Manganites

862

Influence of lanthanum addition on microstructure and properties of Sn-3.5Ag solder system

863

Influence of Large Periodic Sliding Sequences on the Electronical Endurance of Contacts Subjected to Fretting Wear

864

Influence of large scale changes in wind climate on sea level, wave conditions and turbidity in the coastal waters of Estonia, Baltic Sea

865

Influence of Large-Aspect-Ratio Surface Roughness on Electrical Characteristics of AlGaN/AlN/GaN HFETs

866

Influence of large-scale impulsive load on adjacent power plant generating units

867

Influence of large-scale installation of energy saving lamps on the line Voltage distortion of a weak network supplied by photovoltaic station

868

Influence of Large-Scale Organization Structures on Leadership Behaviors

869

Influence of large-scale surface waves on the radar sea return at low grazing angles

870

Influence of laser beam profiles on the frequency bandwidth of laser-generated surface acoustic waves

871

Influence of Laser Breakdown Area Time Evolution on Acoustic Emission of Destructed Zone

872

Influence of laser chirp and parasitics on optimized dispersion-managed directly modulated systems operating at 10 Gbit·s^-1

873

Influence of laser chirp on the performance of 40 Gbit/s optically compensated directly modulated systems

874

Influence of laser diode parameters on the performance of Mach-Zehnder modulator

875

Influence of Laser Distribution on the Thermal Effect of YVO4-Nd:YVO4 Composite Crystals

876

Influence of laser fluctuations on soliton propagation in optical fibres

877

Influence of laser irradiation on wheat growth

878

Influence of laser parameters and unpumped regions near the facets on the power level for catastrophic optical damage in short wavelength lasers

879

Influence of laser parameters on statically calculated clipping distortion in subcarrier multiplexed systems

880

Influence of laser phase noise on dispersive optical fiber communication systems

881

Influence of laser phase noise on performance of optical DPSK receiver with PLL

882

Influence of laser phase on 400-Mbit/s coherent optical DPSK system

883

Influence of Laser Pulse Duration in Single Event Upset Testing

884

Influence of Laser Pulse Duration in Single Event Upset Testing

885

Influence of laser sources with different spectral properties on the performance of vapor cell atomic clocks based on lin‖lin CPT

886

Influence of laser wavelength variation on the laser annealed CdTe thin films grown by thermal evaporation

887

Influence of laserotherapy on the lipid metabolism of the patients with primary hypothyroidism and ishemic heart disease

888

Influence of lateral borders length on current voltage characteristics and oscillation efficiency of planar diode

889

Influence of lateral currents on capacitance spectra of organic metal-insulator-semiconductor structures with a ferroelectric insulator

890

Influence of lateral device scaling and airgap deep trench isolation on reliability performance of 200GHz SiGe:C HBTs

891

Influence of lateral electric field on the anomalous leakage current in polysilicon TFT´S

892

Influence of lateral field on the relaxation oscillation frequency of semiconductor lasers

893

Influence of lateral geometry on magnetoresistance and magnetisation reversal in Ni/sub 80/Fe/sub 20/ wires

894

Influence of lateral geometry on magnetoresistance and magnetisation reversal in Ni₈₀Fe₂₀ wires

895

Influence of lateral growth on the optical properties of GaN epitaxial layers

896

Influence of Lateral Spreading of Implanted Aluminum Ions and Implantation-Induced Defects on Forward Current–Voltage Characteristics of 4H-SiC Junction Barrier Schottky Diodes

897

Influence of Latin American Authors on Engineering Education: A Perspective From the Frontiers in Education Conference

898

Influence of latitude in coarse self-alignment of strapdown inertial navigation systems

899

Influence of lattice geometry on transmission of electromagnetic waves through arrays of crossed dipoles

900

Influence of lattice parameter variations across n-InP-substrates on a complex of material properties of InP/InGaAsP-DHS

901

Influence of Lattice Parameters on the Properties of Crystal Resonators

902

Influence of lattice self-heating and hot-carrier transport on device performance

903

Influence of Lattice Spacing in Disturbed Generalized Frequency Division Multiplexing Systems

904

Influence of lattice strain on phase separation and percolative behaviors in La0.325Pr0.3Ca0.375MnO3 thin films

905

Influence of Lattice Strain on Phase Separation and Percolative Behaviors in La_0.325Pr_0.3Ca_0.375 MnO₃ Thin Films

906

Influence of launching energy on collector transport in InP/InGaAs double-heterojunction bipolar transistors

907

Influence of launching energy on collector transport in InP/InGaAs double-heterojunction bipolar transistors

908

Influence of launching horn on radiation characteristics of a dielectric cone feed

909

Influence of layer eccentricity on the resonant properties of cylindrical active coated nano-particles

910

Influence of layer roughness for road survey by ground penetrating radar at nadir: theoretical study

911

Influence of layer structure and surface passivation on performance of AlGaN/GaN HEMTs on Si and SiC substrates

912

Influence of layer structure on electrical properties of AlGaN/GaN HEMTs

913

Influence of Layer Thickness on the Performance of Stacked Thick-Film Copper Air-Core Power Inductors

914

Influence of Layer Thickness to the Emission Spectra in Microcavity Organic Light Emitting Diodes

915

Influence of layering of NiO/NiFe on exchange bias

916

Influence of Layers Morphology on the Sensitivity of SnO2-based Optical Fiber Sensors

917

Influence of Layout and Packaging on the Temperature of GaAs Power PHEMTs

918

Influence of layout design on the performance of LIGBT

919

Influence of Layout Geometries on the Behavior of 4H-SiC 600V Merged PiN Schottky (MPS) Rectifiers

920

Influence of Layout Parameters on Triggering Behavior in 0.35um and 0.18um Process gg-nMOS ESD Protection Devices

921

Influence of LDD on aging of SOI NMOS transistors

922

Influence of leader shields in the electric field distribution in bushings

923

Influence of leader shields in the electric field distribution in current transformers

924

Influence of Leading Design Parameters on the Force Performance of a Complementary and Modular Linear Flux-Switching Permanent-Magnet Motor

925

Influence of leakage and gain-cavity alignment on the performance of Al(GaInP) visible vertical-cavity surface emitting lasers

926

Influence of leakage currents between electrodes in tunable DBR-lasers

927

Influence of leakage magnetic fields on partial discharge activity in power transformers

928

Influence of leakage parameters on resonance phenomena in radial distribution networks

929

Influence of leakage reduction techniques on delay/leakage uncertainty

930

Influence of leaky surface acoustic wave velocity of glass substrates on frequency variation of ZnO/glass SAW filters

931

Influence of learners´ motivation on responses to Facebook promotions of online courses

932

Influence of learning analytics in software engineering education

933

Influence of learning management system on student engagement

934

Influence of Learning Rate and Neuron Number on Prediction of Animal Phenotype Value Using Back-Propagation Artificial Neural Network

935

Influence of learning styles and academic achievement on performance and preference in different learning modes: An adaptive hypermedia approach

936

Influence of learning styles on improving efficiency of adaptive educational hypermedia systems

937

Influence of left atrial geometry on rotor core trajectories in a model of atrial fibrillation

938

Influence of legibility on perceived safety in a virtual human-robot path crossing task

939

Influence of lens imperfection with LD and LED to single-mode fiber coupling

940

Influence of lens size and shape on the performance of a terahertz traveling-wave stripline dipole antenna

941

Influence of level´s distribution of oxygen vacancies on work of an output oxides

942

Influence of leveler concentration on copper electrodeposition for through silicon via filling

943

Influence of liberalization Dutch utilities regarding maintenance strategy of protection relays

944

Influence of libre software in education: The blogs planet case

945

Influence of Li-excess and Li-deficiency on the directional order in Li-ferrite

946

Influence of lift walker for human walk and suggestion of walker device with power assistance

947

Influence of Light Air Ions on Human Visual Reaction Time

948

Influence of light irradiation an the development of mouse eggs in culture

949

Influence of lightning attack to field in aircraft

950

Influence of lightning flashover criterion on the calculated lightning withstand level of ??800 kV UHVDC transmission lines at high altitude

951

Influence of lightning impulse voltages on power output characteristics of Photovoltaic modules

952

Influence of Light-Soaking in Undoped Polycrystalline Silicon Films from SiCl4/H2

953

Influence of light-soaking treatment on the optoelectronic properties of polymorphous silicon thin films to be used in solar cells

954

Influence of Li-Ion Battery Models in the Sizing of Hybrid Storage Systems with Supercapacitors

955

Influence of limestone powder on mechanical property of lightweight aggregate concrete

956

Influence of line based and space vector hysteresis control processes on PMSM in electric vehicles

957

Influence of line dimensions on the resistance of Cu interconnections

958

Influence of line routing and terminations on transient overvoltages in LV power installations

959

Influence of Line Transpositions on Reenergization Overvoltages-Number of Operations for Reliable Overvoltage Statistical Distributions

960

Influence of linear internal waves on detection ranges of sonar at shallow water

961

Influence of liner-system and Cu-layer thickness on the grain structure of electroplated Cu

962

Influence of link sensing mechanism of IMEP on the performance of TORA under different mobility models

963

Influence of link state updating on the performance and cost of QoS routing in an intranet

964

Influence of lipid shell physicochemical properties on ultrasound-induced microbubble destruction

965

Influence of liquid helium level on dip probe wiring

966

Influence of liquid on properties of backward acoustic waves in piezoelectric plates

967

Influence of load behavior on service restoration

968

Influence of load characteristics on system dynamics and load-shedding control effects in power grid

969

Influence of load characteristics on the applications of passive and active harmonic filters

970

Influence of load characteristics on the power/voltage stability of HVDC systems. I. Basic equations and relationships

971

Influence of load characteristics on the power/voltage stability of HVDC systems. II. Stability margin sensitivity

972

Influence of load current on bipolar DC corona

973

Influence of load imbalance on noise induced in a twisted-wire pair illuminated by a random plane-wave spectrum

974

Influence of load impedances on the quality of Power Line Communication

975

Influence of load model in distribution market emulation

976

Influence of load model on UHVDC Emergency DC Power Support strategy

977

Influence of load on noise and vibration of voltage and current controlled switched reluctance machines

978

Influence of load on operating conditions of third harmonic ground-fault protection system of unit connected generators

979

Influence of Load Resistance on Time Constants of Laser-Induced Thermoelectric Voltage Signal in La_1-xCa_x MnO ₃ and YBa

Influence of load shedding in the voltage stability of an electric power system using trajectory sensitivity analysis

981

Influence of load torque on the detection of rotor faults by means of the sensorless Vienna monitoring method

982

Influence of loading conditions in solving power system problems

983

Influence of loading of the biomechanical properties of articular cartilage

984

Influence of local ‘language’ in data entry errors: A pilot study in the rural Indian setting

985

Influence of local anisotropy fluctuation on soft magnetic properties of the sputtered Fe-Si-Al alloy films

986

Influence of Local High Spot on Additional Local Waviness of Uncoiled Strip

987

Influence of local information on social simulations under the small-world model

988

Influence of local magnetic irregularity on output properties of synchronized MM-wave generator

989

Influence of local matching effects on the accuracy of a sequential A/D-converter

990

Influence of Local Oscillator Phase Noise on the Resolution of Millimeter-Wave Spectral-Line Radiometers

991

Influence of local oscillator-to-signal power ratio on the gaussianity of CP-QPSK signal statistics

992

Influence of local porosity, local permeability, and contact resistance between the gas diffusion layer and the bipolar plate, on the performances of a polymer electrolyte membrane fuel cell

993

Influence of Local Properties on the Perception of Global Object Orientation

994

Influence of localised states on the characteristics of GaN/InGaN QW-LEDs emitting at 480nm

995

Influence of localised surface plasmons on energy transfer between quantum dots

996

Influence of localization of cathode emitting surface on electrovacuum device properties

997

Influence of localized defect on transmission in a coaxial Bragg structure

998

Influence of localized latent defects on electrical breakdown of thin insulators

999

Influence of Long Cable Arrangement upon Repeatability of EMC Immunity Tests against Electromagnetic Field

1000

Influence of long code auto-correlation on RAKE reception performance in DS-CDMA mobile communications

بازگشت