بر اساس عنوان

1
The Influence of Sample Reconstruction on Stock Trend Prediction via NARX Neural Network
2
The influence of sampling parameters on extremely low frequency DCIM
3
The influence of satellite transponder broadcasting plan on video quality
4
The Influence of Saturation on Induction Machine Drive Dynamics
5
The influence of scale [in sustainable human activity]
6
The influence of scale on distributed file system design
7
The influence of scaling effects on the characteristics of mesapiezoresistors with dielectric insulation
8
The influence of scattering on multipath channel characteristic of tunnel
9
The influence of scene content on bit-rate variations in ATM video
10
The influence of science fiction films on the development of biomedical instrumentation
11
The influence of screening on the auger coefficient of 1.3 µm InGaAsP lattice matched to InP
12
The influence of sea surface temperature fronts on radar performance
13
The influence of seasonal soil moisture on the design of grounding systems
14
The influence of seawater ions on the structural features of MFI, FAU and LTA zeolites
15
The influence of second phase precipitation on SiO2/GeO2doped Ni-Zn Ferrite properties
16
The influence of sediment layering and geoacoustics on the propagation of Scholte interface waves
17
The influence of segmentation on individual gait recognition
18
The Influence of Selected Material and Transport Parameters on the Accuracy of Modeling Early Voltage in SiGe-Base HBT
19
The influence of selenium deposited on silver plating on adhesive strength of die-attachment
20
The Influence of Self-Concept Improvement on Member Loyalty to Online Communities: An Empirical Comparison between Social Networks and Virtual Worlds
21
The influence of self-coupling in Josephson junctions on the lower threshold of the I-V characteristic
22
The influence of semiconductor devices on the evolution of computer systems
23
The influence of semiconductors on the evolution of typical laboratory instruments
24
The influence of semiconductors on the teaching of electronics¿ a review
25
The influence of semi-magnetic wedges on the electromagnetic variables and the harmonic content in induction motors
26
The influence of sensitivity coefficient on the performance of microwave devices
27
The influence of sensor and flight parameters on texture in radar images
28
The influence of sensor faults on PM BLDC motor drive
29
The influence of sensor overpass time on passive microwave derived snow water equivalent measurements
30
The influence of service aging on transformer insulating oil parameters
31
The Influence of Service Availability on the Configuration of Underground Three-Phase Primary Systems
32
The Influence of Service Design on Public-perceived Administrative Service Quality: The Moderating Effect of Social Monitoring
33
The Influence of Several Design and Material Variables on the Propensity for Solder Joint Cracking
34
The influence of several environmental conditions on the partial discharge characteristics and on the lifetime of magnet wires under inverter pulse operation
35
The influence of severe plastic deformation on magnetic properties of Ni48Fe48Zr4, Fe1.5Co0.5BTa0.3 and Co80Zr16B4 alloys
36
The influence of severity of fading on the statistical properties of the capacity of Nakagami-m channels with MRC and EGC
37
The influence of SF6 and SF6/N2 gas pressure to the breakdown performance of polyester film
38
The influence of SF6 and SF6/N2 dissociating products on the electrical performance of several insulating varnishes
39
The Influence of SG Modification on the Microstructures of High Manganese Steel
40
The influence of shaft spring constant uncertainty on torsional modes of turbogenerator
41
The influence of Shandong dialects on the acquisition of English plosives
42
The influence of shape on image correspondence
43
The influence of ship motion on bathymetric sonar performance in FM mode of operation
44
The influence of shock waveforms on defibrillation efficacy
45
The influence of shoe heel height on the muscular activity of the thigh during walking
46
The Influence of Short Sales on Stock Market in China
47
The influence of shunt capacitor compensation on the performance of PWM inverter fed induction motor drives
48
The influence of SiC/SiO2 interface morphology on the electrical characteristics of SiC MOS structures
49
The influence of SICSFCL and the relationship between SICSFCL and distance relay protection of power grid
50
The influence of SI-GaAs crystal property on device characteristic
51
The influence of signal imitation on the reception of voice-frequency signals
52
The Influence of Signal Imitation on the Reception of Voice-Frequency Signals
53
The influence of signal pick-up method on measuring precision of tan δ with a quasi-synchronous sampling harmonic analysis method
54
The Influence of Silica Nanoparticles On The Preparation and Stability of O/W Emulsions
55
The influence of silicide technique on the device performance for deep sub-micro pMOSFETs
56
The influence of silicon content on the thermal conductivity of Al-Si/diamond composites
57
The influence of silicon interstitial clusters on the Reverse Short Channel Effect
58
The influence of silicon nitride cap on NBTI and fermi pinning in HfO2 gate stacks
59
The influence of silicon nitride layer parameters on the implied Voc of CZ silicon wafers after annealing
60
The Influence of Silicon on the Precipitation Process in Maraging Stainless Steels
61
The Influence of Silicon Surface Defects on MOS Radiation-Sensitivity
62
The influence of silver content on the reliability of lead-free solder joints under drop condition
63
The influence of SiN films on negative bias temperature instability and characteristics in MOSFET´s
64
The influence of single-photon absorption on the performance of the two-photon waveguide autocorrelator
65
The influence of sintering temperature on the flashover performance of alumina insulators in vacuum
66
The influence of sintering temperature on the space charge distribution of ZnO varistor
67
The influence of SiO2 on fluorescence spectra of Cr-doped glass and glass ceramic
68
The Influence of Situational Factors in Software Product Management: An Empirical Study
69
The influence of situational factors on accepting e-learning technology by university teachers
70
The Influence of Size and Composition on the Creep of SnAgCu Solder Joints
71
The Influence of Size and Responsiveness of Virtual Objects on Perceived Heaviness
72
The Influence of Size and Shape of Microorganism on Pulsed Electric Field Inactivation
73
The Influence of Size Distribution on teh Luminescence Spectrum of CdTe Quantum Dots
74
The influence of skewed populations on statistical and neural network control charts for process mean
75
The influence of skin effect on the accuracy of eddy current energy loss calculation in electrical steel sheets
76
The Influence of Slant Cracks on Rotor´s Torsional Shear Stress
77
The influence of slit construction on the eddy current braking torque considered by 3D FEM analysis
78
The influence of slot position on the shielding degradation of metallic enclosures
79
The Influence of Slow Blood Volume Waves on the Shape of the Dicrotic Complex
80
The influence of small amounts of N2 in SF6 on prebreakdown discharges
81
The influence of small-angle scattering on ballistic transport in quantum dots
82
The influence of smart controller of the distributed generation sources and capacitor banks on loss minimization and profile improvement in the electricity distribution networks voltage
83
The Influence of Smart Phone´s Mobility on Bluetooth Worm Propagation
84
The Influence of SNS Network Environment on University Students and the Probe of its Strategies
85
The influence of SO2 environments on immersion silver finished PCBs by mixed flow gas testing
86
The Influence of Social Capital in an Online Community on Online Review Quality in China
87
The influence of social capital on entrepreneurial decision-making
88
The influence of social dependencies on decision-making: initial investigations with a new game
89
The influence of social display in competitive multiagent learning
90
The influence of social media engagement on TV program ratings
91
The Influence of Social Media on Organizational Socialization
92
The influence of social networks on communication in the classroom
93
The influence of social networks on student´s evaluation and results
94
The Influence of Social Presence on Continual Participation in Online Communities: The Relational View Based on Social Identity Theory
95
The influence of social presence on enjoyment and intention to use of a robot and screen agent by elderly users
96
The influence of social relationship quality on employee creativity
97
The influence of socio demographic factors on severe weather concern, knowledge and preparedness among Malaysians
98
The Influence of Socio-economic Development on Soil Heavy Metals Accumulation in a Typical Region of Yangtze River Delta
99
The Influence of Sociotechnological Mechanisms on Individual Motivation toward Knowledge Contribution in Problem-Solving Virtual Communities
100
The influence of soil moisture upon the geothermal climate signal
101
The influence of soil particle sizes on hyperspectral prediction of soil organic matter content
102
The influence of soil properties on the above-ground tree biomass in Taman Negara Pahang, Malaysia
103
The influence of solar shielding on the thermal behavior of outdoor communication equipment
104
The influence of solder fillet geometry on the occurrence of corona discharge during operation between 400 and 900 V in partial vacuum
105
The Influence of Solid-State Cohesion of Conditioned Metal Electrodes on the Electrical Strength of the Vacuum Gap
106
The influence of solvent on CuInS/sub 2/ semiconductor nanocrystals synthesis and growth under solvothermal conditions
107
The influence of some construction parameters on electric stress grading in XLPE cable terminations
108
The Influence of some Head and Tape Constants on the Signal recorded on a Magnetic Tape
109
The influence of some head and tape constants on the signal recorded on a magnetic tape
110
The influence of source and drain junction depth on the short-channel effect in MOSFETs
111
The influence of source and drain junction depth on the sub-50nm MOSFET devices
112
The influence of source ballast resistance on current spreading in grounded gate nmosts
113
The influence of source impedance in electrical characterization of Solid state lighting sources
114
The influence of source impedance on the electrooptical switching behavior of LED´s
115
The influence of source overlapping on correlation matrix and activity index
116
The influence of sp3 bonded carbon on field emission from nanostructured sp2 bonded carbon films
117
The influence of space and time varying distortions on objective intelligibility estimators for region-of-interest video
118
The influence of space charge and gas pressure during electrical tree initiation and growth
119
The influence of space charge effect and stochastic effects on spatial resolution of nuclear microprobe
120
The influence of space charge formation on polymer degradation investigated by means of PD
121
The influence of space charge on spatial resolution of a nuclear microprobe
122
The Influence of Space Environment on Microscope Imaging System
123
The Influence of Spacer Dynamic Properties in the Control of Bundle Conductor Motion
124
The influence of spatial and temporal correlation on the capacity of MIMO channels
125
The Influence of spatial congruency on audiovisual interaction in a visual-attention task
126
The Influence of Spatial Correlation and Severity of Fading on the Statistical Properties of the Capacity of OSTBC Nakagami-m MIMO Channels
127
The influence of spatial variations of diffusion length on charge collected by diffusion from ion tracks
128
The influence of spatio-temporal sensitivity on perceptual filling-in induction process
129
The influence of spectral energy distribution of light sources on visual performance
130
The influence of speech coding algorithms on automatic speech recognition
131
The Influence of Speech/Non-Speech Segmentation on On-Line and Off-Line Speaker Segmentation Accuracy
132
The Influence of Speed and Amount of Air on the Formation of Deposition during Straw Briquette Combustion
133
The influence of spin-destruction collisions on the precision of atomic SERF magnetometer
134
The influence of spin-diffusion effects on current driven domain-wall motion
135
The influence of spreading sequences on iterative multiuser detectors
136
The Influence of Sputtering Power of Aluminum Film in Aluminum Induced Crystallization of Low Temperature Poly-Silicon Film
137
The influence of square voltage rise time on partial discharge spectra
138
The influence of square voltage waveforms on transformer insulation break down voltage
139
The influence of square wave voltage duty cycle on PD behavior
140
The influence of squirrel cage geometry on synchronization of line start permanent magnet synchronous motor
141
The influence of staff use of a virtual learning environment on student satisfaction
142
The Influence of Stakeholders on Technology Innovation: A Case Study from China
143
The influence of standoff height and pad size on the Shear fracture behavior of BGA structured Cu/Sn3.0Ag0.5Cu/Cu interconnects
144
The influence of starting precursors on grain growth, microstructure evolution and Jc property of Bi-2223/Ag tapes
145
The influence of stator pole shape and its arrangements on cogging torque for double-sided AFPM generator
146
The influence of still air environment on thermal transient measurement of high power LED
147
The influence of stimulation parameters on the relative phase clustering index
148
The influence of stimulation pulse frequency on the generation of joint moments in the upper limb
149
The influence of stimulus intensity on spike timing and the compound action potential in the electrically stimulated cochlea: a model study
150
The influence of stimulus onset asynchrony on neuronal suppressive phenomenon in face processing: An event-related potential study
151
The Influence of Stochastic Organ Conductivity in 2D ECG Forward Modeling: A Stochastic Finite Element Study
152
The Influence of Stored Energy at Step Discontinuities on the Behavior of Surface-Wave Gratings
153
The influence of straight-fin heatsink on noise susceptibility of IC-capacitive coupling
154
The Influence of Strain on Electronic Structure of InAs/GaAs Quantum Dot with wetting layer
155
The influence of strain on the dielectric behavior of (Bax Sr1-x)Ti1+yO3+z thin films grown by LS-MOCVD on Pt/SiO2/Si
156
The influence of strain on the small signal gain and lasing threshold of GaInAs/GaAs and GaAs/GaInAlAs strained-layer quantum well lasers
157
The influence of strain on water treeing in XLPE power cables
158
The influence of strained SiGe thin layer and correlative structure parameters on sub-threshold characteristics of SiGe PMOSFETs
159
The influence of strain-rate dependent solder material models on the interconnection stress of BGA components in Jedec drop test
160
The influence of strategic orientation on innovation performance: A research framework from TMT perspective
161
The Influence of Straw Shape on the Formation of Deposits during Straw Briquette Combustion
162
The influence of stray capacitance on wet tracking of polyester resin
163
The influence of street furniture and tree trunks in urban scenarios on ray tracing simulations in the millimeter wave band
164
The Influence of Stress on Aluminum Conductor Life
165
The influence of stress on ferromagnetic hysteresis
166
The influence of stress on ferromagnetic hysterisis
167
The influence of stress on surface Barkhausen noise generation in pipeline steels
168
The influence of stress on surface Barkhausen noise generation in pipeline steels
169
The influence of stress relaxation on charged walls in a
170
The influence of stretch-activated channels on defibrillation
171
The Influence Of Stripe Domain Structure On Domain Wall Dynamics
172
The influence of strong electric field on the interface in the Al-SiO2-n-Si Auger transistor
173
The Influence of Strong Electromagnetism Field to Wireless Communication System
174
The influence of structural characteristics on the response of silicon avalanche photodiodes to proton irradiation
175
The influence of structural complexity on product costs
176
The influence of structural components size on the abrasion resistance of steels
177
The influence of structural defects on intra-granular critical currents of bulk MgB2
178
The influence of structural parameters of electromagnetic fluid jetting dispenser
179
The influence of structure on water treeing in crosslinked polyethylene: accelerated aging methods
180
The influence of structure on water treeing in crosslinked polyethylene: crystallization and annealing effects in bow-tie tree growth
181
The influence of structure on water treeing in crosslinked polyethylene: tree morphology and the influence of organic contaminants
182
The influence of structure parameters on terahertz wave filter based on photonic crystal ring cavity
183
The Influence of Structured Programming on PL/I Program Profiles
184
The influence of stud bumping stress on device degradation in scaled MOSFETs
185
The Influence of Students´ Knowledge on Security towards Their Behavior with Security Risks within the Context of Saudi Arabia
186
The Influence of Subchannel Diversity on the Performance of OFDMA Systems Based on IEEE 802.16
187
The influence of subgrade with high modulus on the design of asphalt pavement structure
188
The Influence of Subjects and Environment on Audiovisual Subjective Tests: An International Study
189
The influence of subjects´ personality traits on personal spatial zones in a human-robot interaction experiment
190
The influence of subliminal visual primes on player affect in a horror computer game
191
The Influence of Sub-Prime Crisis on the Export of Textile Industry of Nantong, China - Based on the CMM Model and the Application of Management Informationization Tools
192
The influence of substitution and doping on the thermoelectric properties of CePd3
193
The influence of substrate atomic step morphology on threading dislocation distributions in iii-nitride films
194
The influence of substrate bias fixed charge in the buried insulator on the gain of the parasitic bipolar inherent in silicon-on-insulator MOSFETs
195
The Influence of Substrate Bias on the Texture Control and Performance of CrV Underlayer for L10 FePt Thin Films
196
The influence of substrate bias upon the AC characteristics of MOS transistors
197
The Influence Of Substrate Defects And Substrate Surface Quality On The Optical And Electrical Properties Of Epitaxial InGaAs:InP
198
The influence of substrate edge stress on magnetoresistive head anisotropy
199
The Influence of Substrate Enhancement on Moisture Sensitivity Level (MSL) Performance for Green PBGA Packages
200
The influence of substrate junctions on notch formation in the etching of storage stack polysilicon
201
The influence of substrate lens design in terahertz time-domain spectroscopy
202
The influence of substrate on the potential barrier formation for the electrons tunnelling from the thin semiconductor films
203
The Influence of Substrate Stiffness on the Performance of a Magnetoelastic Bilayer Gas Flow Sensor
204
The influence of substrate temperature and the anneal ambient on the redistribution of arsenic implanted into silicon at ultra-low energy
205
The influence of substrate topography on switching time of plated wire memory elements
206
The influence of sub-wavelength grating on wavelength tuning range in VCSEL
207
The influence of successive electrical breakdowns on the breakdown voltage of n-hexane
208
The influence of sunspot number on high frequency radio propagation
209
The influence of superconducting fault current limiter structure on the V-I characteristic
210
The influence of superparamagnetic particle size distribution and ferromagnetic phase on GMR in melt spun Cu-Co granular alloys
211
The influence of superparamagnetic particle size distribution and ferromagnetic phase on GMR in melt spun Cu-Co granular alloys
212
The influence of supervisors´ emotional intelligence on non-bank supervisory employees´ organizational citizenship behavior
213
The Influence of Support Structure Pattern to the Flatness of Reflector Moving Grating Light Modulator
214
The Influence of Support-Configuration on the Acceleration Sensitivity of Quartz Resonator Plates
215
The influence of support-configuration on the acceleration sensitivity of quartz resonator plates
216
The influence of support-configurations on the acceleration effects of doubly rotated quartz resonators at high temperatures
217
The influence of surface ageing features of insulators on wet flashover performance
218
The influence of surface alloying with tantalum or silicon on cytocompatibility of titanium nikelid
219
The influence of surface charge accumulation on the vaccum surface flashover characteristic of epoxy resin under nanosecond pulse
220
The influence of surface charge and bevel angle on the blocking behavior of a high-voltage p+-n-n+device
221
The influence of surface charge on lightning impulse breakdown of spacers in SF6
222
The influence of surface conditions on the coercive force of SmCo5particles
223
The Influence of Surface Curvature on High-Frequency RCS Simulations
224
The influence of surface deformations on electroencephalographic recordings
225
The Influence of Surface Finish and Metallization on Electrode Electromigration in Alpha-Quartz During Sweeping
226
The influence of surface fluctuations on early failures in single-damascene Cu wires: A Weakest Link Approximation analysis
227
The influence of surface forces of magnetic separation
228
The influence of surface modification on optoelectronic properties of monocrystalline silicon solar cells
229
The influence of surface modification on the electrical properties of silicon carbide flakes
230
The influence of surface morphology and rigidity of the substrata on cell motility
231
The Influence of Surface Oil on C-and Ku-Band Ocean Backscatter
232
The influence of surface oxidation on prebreakdown electron emission processes
233
The Influence of Surface Oxides on Whiskering
234
The influence of surface phenomena on the initiation of discharges in vacuum
235
The influence of surface plasmon resonance with different metal on emission of GaSb for 1.550μm application
236
The influence of surface potential fluctuations on the operation of the MOS transistor in weak inversion
237
The influence of surface preparation on rear surface passivation of mc-Si by thermally treated direct PECVD silicon nitride
238
The Influence of surface Profile on Leakage in Roomtemperature Seal-Bonding
239
The influence of surface properties of plasma-etched polydimethylsiloxane (PDMS) on cell growth and morphology
240
The influence of surface properties on the characteristics of formed point contacts on p-type germanium
241
The influence of surface roughness and coating on the impulse breakdown voltage in SF6
242
The influence of surface roughness of Bragg reflector layers on characteristics of microwave solidly mounted resonator
243
The influence of surface roughness on THz reflection measurements
244
The influence of surface states on open-circuit voltage for Cr, p-type silicon MIS solar cells
245
The influence of surface tension and equilibrium contact angle on the spreading and receding of water droplets impacting a solid surface
246
The influence of surface treatments on the electrical characteristics of polysilicon emitter bipolar transistors
247
The influence of surface waviness on hydrodynamic lubrication behavior in cold rolling process
248
The influence of surface wettability on the ladybird beetles attachment to solid surfaces
249
The Influence Of Surfactants On The Remote Sensing Of Ocean Internal Waves And Ship Wakes
250
The influence of survival mechanical stress and voltage frequency on electrical tree in XLPE
251
The influence of suspension system design on vertical loads imposed on the track
252
The influence of switching arcs on contact resistance of Ag/SnO2 materials
253
The Influence of Synchronization Verification and Code Replica Time Position Reset Penalty on the Multiple-Dwell Serial Search Ds Code Acquisition
254
The influence of syntactic and semantic errors on the quality of software
255
The influence of system developers´ creative style on their attitudes toward and assimilation of a software process innovation
256
The influence of system parameters on multibaseline InSAR for layover solution
257
The Influence of Tape Arrangements on the Critical Current of Bi-2223 Superconducting Current Leads
258
The influence of tape magnetostatics on electroacoustic properties: comparison between theory and experiment
259
The influence of tape magnetostatics on electroacustic properties: Comparison between theory and experiment
260
The influence of target acceleration on velocity estimation in dual-channel SAR-GMTI
261
The Influence of Target Micromotion on SAR and GMTI
262
The influence of target requirements on the production, acceleration, transport, and focusing of ion beams
263
The influence of target thickness on characteristics of a forward-emitted proton beam produced by an ultrashort laser pulse
264
The influence of task and format on reading results with an online text
265
The Influence of Tax Policies on Project investment
266
The influence of Tb substitution on the magnetic properties of nanocomposite Pr2Fe14B/α-Fe magnets
267
The Influence of Teaching Machine Technology on Electronic Systems Maintenance Training
268
The influence of team relationships on software quality
269
The influence of team training methods on simulator performance
270
The Influence of Tech SMEs Policy on Enterprise Growth
271
The Influence of Technical Similarity Relation on Innovation Performance: The Cooperative Relation as Mediator
272
The influence of technological bases errors on radial displacement of work pieces axis in cylindrical grinding
273
The influence of technological innovation resources on high-tech product export performance: Evidence from national hi-tech zones in China
274
The Influence of Technological Parameters on Ultra-Short Gate SI-NMOS Transistor Performances
275
The influence of technological process on properties and reliability of thick film layers
276
The influence of technology on conceptualization or new concepts for existing words in English: Familiar concepts and initiating multicultural understanding
277
The Influence of Technology-Related, Market-Related, and Standards-Related Strategic Signaling During a Standards War
278
The Influence of Telemanipulation-Systems on Fine Motor Performance
279
The Influence of Teleoperator Stiffness and Damping on Object Discrimination
280
The influence of temperature and aging of cellulose on water distribution in oil-paper insulation
281
The influence of temperature and core geometry on ferrite core losses under DC bias conditions
282
The influence of temperature and electric field frequency on the dielectric properties of electrical machines insulation systems
283
The Influence of Temperature and Electric Field on The Etch-Channel Density in Swept Cultured Quartz
284
The influence of temperature and excitation pattern on noninvasively detected conduction velocity in single motor units
285
The influence of temperature and humidity on the wettability of immersion tin coated printed wiring boards
286
The influence of temperature characteristic of zero sequence current transformer on capability of leakage protective plugs
287
The influence of temperature gradients in isothermal electromigration tests
288
The influence of temperature gradients on the distribution of axial current in a large current Z-pinch implosion
289
The influence of temperature on BSIT´s turn-off time
290
The influence of temperature on dynamic gate-bias stress instability in amorphous silicon thin film transistors
291
The influence of temperature on frequency response function of ferrite transmission line
292
The influence of temperature on lifetime
293
The influence of temperature on partial discharge and breakdown behavior in model gas transformer windings
294
The Influence of Temperature on Stress Relaxation in a Chill-Cast, Tin-Lead Solder
295
The influence of temperature on the cycle life performance of rechargeable Li-TiS2 cells
296
The influence of temperature on the drift velocity of electron in semiconductor superlattice under influence of the tilted magnetic field
297
The influence of temperature on the efficiency of magnet wire insulation
298
The influence of temperature on the eigenmodes of a semiconductor laser
299
The Influence of Temperature on the Magnetic Behavior of Colloidal Cobalt Nanoparticles
300
The influence of temperature on the production of biogas under mesophilic regime
301
The influence of temperature on the recovery of the hydrophobicity on silicone rubber surfaces
302
The influence of temperature on the tolerances of MOS-transistors in a 1 µm technology
303
The influence of temperature on water treeing in polyethylene
304
The influence of temperature on water treeing in polyethylene
305
The influence of temperature on YVO4 and GdVO4 Raman laser parameters
306
The influence of temperature to the regularity of life cycle
307
The Influence of Temporal Information on Human Action Recognition with Large Number of Classes
308
The influence of ten different motivational factors on academic entrepreneurial intentions
309
The influence of tensile and compressive damage on bending fatigue of human cortical bone
310
The influence of tensile strain on differential gain and Auger recombination in 1.5-μm multiple-quantum-well lasers
311
The influence of tensile stress on the critical current of filamentary Nb3Sn magnet conductor
312
The influence of termination properties on the thermal shock and thermal cycle performance of surface mount multilayer ceramic capacitors
313
The Influence of Terrain Scattering on Radio Links in Hilly/Mountainous Regions
314
The influence of terrain shielding on radio wave propagation at 8000 Mc
315
The influence of test parameters and package design features on ball shear test requirements
316
The influence of test parameters on TEM cell measurements of ICs
317
The influence of test voltage waveforms on partial discharge activity in XLPE
318
The Influence of the 21 MeV Protons on Heterolaser Optical Capacity Based on Gallium-Arsenide with Fiber Resonator
319
The influence of the ambient and junction temperature on the MPS critical parameters
320
The influence of the amplitude of driving signal in measurement of the active points on human skin
321
The Influence of the analysis technique on estimating liver iron overload using magnetic resonance imaging T2∗ quantification
322
The influence of the applied rotor voltage on ride-through capability of doubly fed induction generator
323
The influence of the arc voltage in synthetic test circuits
324
The influence of the arc voltage in synthetic test circuits
325
The influence of the atmosphere on the remote sensing of sea ice using passive microwave radiometers
326
The influence of the axial magnetic field upon the low voltage electric arc in vacuum
327
The influence of the background model on DNA motif prediction: An assessment for zinc finger transcription factor ZFX
328
The influence of the base resistance modulation on switching losses in IGBTS
329
The influence of the basin structure of Boolean networks on their long range correlated dynamics
330
The influence of the beamwidth of transmit antenna on RS103, radiated susceptibility
331
The influence of the Benson boiler on the development of power stations
332
The influence of the bladder geometry to the bladder pressure and urine flow
333
The Influence of the Bonding Area of welded Contact Tips on Contact Erosion
334
The influence of the boundary conditions on the robustness of a CNN
335
The influence of the breakdown electric field in the lightning corona sheath on the dynamics of the return stroke
336
The influence of the broken bar fault on the magnetic field and electromagnetic torque in 3-phase induction motors
337
The influence of the buffer size in packet loss for competing multimedia and bursty traffic
338
The influence of the Cambridge Mathematical Laboratory on the LEO project
339
The Influence of the Capping Layer on the Perpendicular Magnetic Anisotropy in Permalloy Thin Films
340
The influence of the ceramic phase on the structure of resorbable biocomposites based on collagen
341
The influence of the channel estimation error on the closed loop transmit diversity algorithms performance
342
The Influence of the Chip-Scale-Package on the Functioning and Reliability of RF-MEMS Switches
343
The influence of the choice of ground node on the performance of active filters
344
The influence of the coefficient of nonparabolicity on the distribution of the scattering angles in GaAs
345
The influence of the Cole-Cole model coefficients on the parameters of the recovery voltage phenomena of paper-oil insulation
346
The Influence of the Collector Design on the fmaxvs. ft Characteristics for Different Types of Si-based RF Bipolar Transistors
347
The Influence of the Concentration and Mobility of Ions on Dielectric Loss of Insulating Oils
348
The influence of the concentration and mobility of ions on dielectric loss of insulating oils
349
The Influence of the Concen-tration and Mobility of Ions on Dielectric Loss of Insulating Oils
350
The influence of the conducting inductance in the auxiliary resonant commutated pole inverter
351
The influence of the configuration of the chink of secondary lead single lens at the optical parameters
352
The influence of the connection technology of dispersed energy sources on grid stability
353
The influence of the consumer modelling approach in demand response programs implementation
354
The influence of the contact materials arc-conditioning method on electric strength of vacuum interrupters stored in nonvoltage state
355
The influence of the control plane mechanisms on the quality of services offered by the GMPLS network
356
The influence of the coordination results on the satellite networks technical parameters
357
The Influence of the Core Material on the Thermionic Emission of Oxide Cathodes
358
The influence of the coupling capacitance and the frequency of the voltage stress with respect to a partial discharge measurement
359
The influence of the critical volume on high repetition rate, corona stabilised switching
360
The influence of the cryptographic protocols on the quality of the radio transmission
361
The influence of the crystallite orientation distribution function (ODF) on the magnetocrystalline anisotropy of a rimmed steel thin sheet
362
The influence of the DC link inductor design on the rectifier voltage stress in an adjustable speed drive during a mains voltage surge
363
The influence of the DC-link voltage control on the current harmonic filtering of the series hybrid active power filters
364
The influence of the dead time duration and switching frequency on the input current distortion of voltage-source active rectifiers
365
The influence of the degree of Cu-Zn disorder on the radiative recombination transitions in Cu2ZnSn(S,Se)4 solar cells
366
The influence of the design and operation of protection and control on power quality
367
The influence of the design method for induction motor with stationary rotor on identification of its parameters
368
The influence of the DG sources in the optimal operation of the electrical distribution systems
369
The influence of the diamagnetic plate thickness on the stability zone in vertical static magnetic levitation
370
The influence of the dielectric strength of the N2/SF6-insulation by conducting particle on the spacer surface
371
The influence of the different measurement instrumentation on the radiated emisson measurement above 1 GHz
372
The Influence of the Digital Divide to the Electronic Government Affairs
373
The influence of the disorder type on the optical properties of metallic photonic crystals
374
The influence of the dispersion flux on the connection transient regime for DC electromagnets
375
The influence of the dispersion map in coherent optical OFDM transmission systems
376
The influence of the distributed trapped charge on VFTO
377
The influence of the distribution system structure on distortion emission and propagation
378
The influence of the drain multiplication current on latchup behavior
379
The influence of the drive layer thickness in ion implanted bubble circuits
380
The influence of the early failure on the life distribution of sensors
381
The influence of the elasticity of magnetic tape on some parameters of magnetic recording
382
The influence of the electric field on the fluidity of granular materials
383
The influence of the electric field shape on the gas breakdown under low pressure and small inter-electrode gap conditions
384
The influence of the electric vehicle charging on the distribution network and the solution
385
The influence of the electrical characteristics of premises cables on the interference immunity of VDSL
386
The influence of the electrical conditions on total dose behavior of the analog switches
387
The influence of the electrode multilayer structure on the quartz resonator parameters
388
The influence of the electrode size on the electrical response of a potentiometric gas sensor to the action of oxygen
389
The influence of the electrolyte parameters on the efficiency of the oxyhydrogen (HHO) generator
390
The influence of the electrolyte-semiconductor interface on the doping profile measurement of a GaAs structure
391
The influence of the electronic structure on the field electron emission from carbon nanotubes
392
The Influence of the Energy Dissipation and of the Geometry on Toroidal Resonators with a Conducting Separating Wall
393
The influence of the EV charging station´s large-scale access to the backbone network
394
The Influence of the Exact Evaluation of Radiation Fields in Finite Precision Arithmetic on the Stability of the Time Domain Integral Equation Method
395
The influence of the external circuit on arc-discharge of a spark-gap: its application to a pulsed gas laser
396
The influence of the external magnetic field on acoustic properties of magnetic elastomers
397
The influence of the feature vector content on the CBIR system efficiency
398
The influence of the filler characteristics on the surface resistivity of epoxy composition applied in SF6 insulation systems
399
The influence of the film-substrate interface on the defect density and other properties of sputter-deposited amorphous hydrogenated silicon
400
The Influence of the Finite Conduction of Metal Walls on the Performances of Powerful Relativistic UNF Devices with Irregular Electrodynamic Systems
401
The influence of the free edge on the vibration characteristics of a contoured, beveled cylindrical quartz resonator
402
The influence of the frequency on the efficiency and on the power quality of a contactless power transfer system
403
The Influence of the Gain—Carrier Density Characteristic on Q-Switching in Quantum-Dot Lasers
404
The influence of the Gamma-effect of the cathode on the IECF driving low consumption electricity
405
The influence of the gas insulation parameters on the three-electrode spark gap functioning
406
The influence of the gas insulation parameters on the triggered three-electrode spark gap functioning
407
The influence of the gate leakage current and the gate resistance on the noise and gain performances of 90-nm CMOS for micro- and millimeter-wave frequencies
408
The influence of the GNSS solution on the estimated parameters in the course of sensor integration
409
The influence of the grain boundary on the temperature coefficient of Ti-substituted telecommunication ferrites
410
The Influence of the Ground on the Calibration and Use of VHF Field-Intensity Meters
411
The influence of the growth temperature on the doping characteristics of P-GaP layers in AlGaInP red LED
412
The influence of the Hall scattering factor on the determination of activation energies of the nitrogen donors in 4H-SiC epitaxial layers
413
The influence of the harmonics on the temperature of electrical Machines
414
The Influence Of The Heat Treatnent On The Structure And Properties Of The Permanent magnets Fe-Nd-B
415
The influence of the height variation on the frequency bandgap in an AMC, artificial magnetic conductor, for wireless applications: an EM experimental design approach
416
The influence of the high frequency electromagnetic field on grape processing
417
The influence of the high latitude ionosphere on HF radio/radar performance
418
The Influence Of The High Spatial Resolution Of Spot HRV Data On The Separibility Of Spectral Classes
419
The Influence of the Horizontally Stratified Conducting Ground on the Lightning-Induced Voltages
420
The Influence of the Inclination of Transition over the Production of "Vertical Air"
421
The influence of the inductance on the voltage-current characteristic and on low frequency performance of DC SQUIDs
422
The influence of the industrial training act
423
The influence of the initial pulse amplitude on the stability of solitons in a highly birefringent optical fiber
424
The influence of the input capacitor on the ESD behavior
425
The influence of the instruction codes on radiated near-magnetic-fields $a case study on A5000
426
The influence of the interface trap density on the performance of bipolar devices
427
The influence of the internal correction voltage on the proper ratings of receiving-type tubes
428
The influence of the Internet on Japanese education: case of the 100 Schools Networking Project
429
The Influence of the Inverted Sea Wave Theories on the Derivation of Coastal Bathymetry
430
The influence of the inverter switching frequency on rotor losses in high-speed permanent magnet machines: An experimental study
431
The influence of the large bandwidth-delay product on TCP Reno, NewReno, and SACK
432
The influence of the layout on the ESD performance of HV-LDMOS
433
The influence of the level of abstraction on the evolvability of conceptual models of information systems
434
The influence of the load on the behavior of the electromechanical variator
435
The influence of the longitudinal plasma wave on the propagation characteristics of a metal-clad-dielectric-slab waveguide
436
The Influence of the Los Alamos and Livermore National Laboratories on the Development of Supercomputing
437
The Influence of the Low - Voltage Capacitor Dielectric Material on the Capacitive Probe Response in the Nanosecond Range
438
The influence of the lower atmospheric refraction on measurements of down-looking radar
439
The influence of the LTE system on DVB-T reception
440
The influence of the M-π-n structure on CdTe X-ray detector performance
441
The influence of the M-π-n structure on CdTe X-ray detector performance
442
The influence of the magnetic field on the problem of stability in a crossed-field diode
443
The influence of the material conditions on the breakdown behaviour of XLPE-samples at voltages of different shapes
444
The influence of the material constants on LGS resonant structures characteristics
445
The influence of the meaning of pictures and words on Web page recognition performance
446
The influence of the measurement probe on the evaluation of electromagnetic fields
447
The influence of the measurement setup on enhanced AC hot carrier degradation of MOSFETs
448
The influence of the memory for a special permutation channel
449
The influence of the method of winding construction on metrological properties of current transformers designed for systems of monitoring of power quality
450
The influence of the micro-structure on optical properties of nc-Si:H films for solar cells
451
The influence of the MLP´s output dimension on its performance in image restoration
452
The influence of the morphology on properties of aromatic polyamide fibre
453
The influence of the mounting manner of the power LEDs on its thermal and optical parameters
454
The Influence of the Mushroom Compost Application on the Microorganism Quantity of Reclamated Soil
455
The influence of the N+ source region on parasitic PNP conduction in integrated N-Channel DMOS
456
The influence of the nanowire geometry in SNSPDs
457
The Influence of the Network Impedance on the Nonsinusoidal (Harmonic) Network Current and Flicker Measurements
458
The influence of the network impedance on the non-sinusoidal (harmonic) network current and flicker measurements
459
The influence of the noise in the restoration of solar radio images using adaptive regularization techniques based on clustering
460
The influence of the non-linearity of electric loads on capacitive compensation
461
The influence of the non-uniform spline basis on the approximation signal
462
The Influence of the n-Side Doping on Metastable Defect Concentrations in Cu(In,Ga)Se2 Evaluated From Space Charge Profiles
463
The influence of the number of clusters on randomly expanded data sets
464
The influence of the number of values in sub-functions on the effectiveness and efficiency of the functional decomposition
465
The influence of the object-oriented language model on a supporting architecture
466
The influence of the occurrence frequency upon the radial distribution of electromagnetic vibration and noise in a three-phase squirrel-cage induction motor
467
The influence of the operating mode of IC-devices on their lifetime: a reliability test of plastic encapsulated CMOS-circuits in a humid environment
468
The influence of the optical band gap of buffer layers at the p/i- and i/n-side on the performance of amorphous silicon germanium solar cells
469
The influence of the optical stark shift on the two-photon excitation of the molecular hydrogen E, F1Σ+gstate
470
The Influence of the Organic Compounds on the Contaminated Electrical Contacts
471
The influence of the organic solar cell open-circuit voltage and short-circuit current parameters on the porosity of titanium electrode
472
The influence of the orientation effects on the phase secretions form under the nematic-isotropic liquid phase transition
473
The influence of the over-speed protection control for the isolated grid stability
474
The influence of the package environment on the functioning and reliability of RF-MEMS switches
475
The Influence of the Parameters on the Rhythm in Excitatory-Inhibitory Neural Network
476
The influence of the parasitic current on the nonlinear electrical response of capacitive sensed cantilever beams
477
The influence of the partial discharge on the electrical aging property of high voltage ceramic capacitor
478
The influence of the Pb-free solder alloy composition and processing parameters on thermal fatigue performance of a ceramic chip resistor
479
The influence of the penalty factor in order selection criteria
480
The influence of the phase current of a linear array over the directivity pattern
481
The Influence of the Picking Times of the Components in Time and Space Assembly Line Balancing Problems: An Approach with Evolutionary Algorithms
482
The influence of the plasma jet on the hydrophobicity transfer rate of contaminated silicone rubber
483
The Influence of the pole asymmetry on the BLDC motors
484
The influence of the polymer structure on the electrical properties
485
The Influence of the Pool of Candidates on the Performance of Selection and Combination Techniques in Ensembles
486
The Influence Of The Position Of The Active Fiber Relative To The Muscle Boundary In Computing Single Fiber Action Potentials
487
The influence of the position of the starting material during melting by the electromagnetic induction in a cold crucible
488
The influence of the pre-anneal ambient on the gate oxide integrity effect of copper contamination
489
The Influence of the Prestrike on Transmission-Line Lightning Performance
490
The influence of the probability density function on similartaxis in MEC
491
The Influence of the Probe Connection on mm-Wave Antenna Measurements
492
The influence of the probe on the circular aperture near field
493
The influence of the properties of magnetic materials on a voltage source inverter control
494
The influence of the pulse solid-state laser radiation on the sclerotic process
495
The influence of the pump chamber geometry on the characteristics of the micropump operated by surface tension
496
The Influence of the Quality Factor of Quartz on Some Device Properties
497
The influence of the quality standards ISO 9000 on telecom manufacturers
498
The influence of the radius of the contour on the orientation of the zero-temperature contoured SC-cut quartz resonator
499
The Influence of the Rail Material on the Multishot Performance of the Rapid Fire Railgun
500
The influence of the rail material on the multishot performance of the rapid fire railgun (RAFIRA)
501
The Influence of the RectifiedWave on the Usability of Six-Port-Based Mobile Receivers
502
The influence of the reverberation time on the distribution of sound field in critical listening room at low frequencies
503
The influence of the reverse Early effect on the performance of bandgap references
504
The influence of the rocker sole profile´s orientation on the sagittal plane ankle range of motion
505
The influence of the rotor on surge pd testing of low voltage AC motor stator windings
506
The influence of the rotor pole shape on the static and dynamic characteristics of the switched reluctance motor
507
The influence of the scattered field observation domain size on imaging measurement setup implementation
508
The influence of the scattered field on the reradiation pattern of reflector arrays
509
The influence of the scattering probe on the measurement results of electromagnetic fields by the monostatic Modulated Scatterer Technique
510
The influence of the screen on the characteristics of omnidirectional radiators and rarefied arrays
511
The influence of the secondary electron induced asymmetry on the Electrical Asymmetry Effect in capacitively coupled plasmas
512
The influence of the selected factors on transient thermal impedance of semiconductor devices
513
The influence of the self-consistency on intraband optical transitions in semiconductor quantum dot
514
The Influence of the Self-Magnetic Field on the Steady-State Current Distribution in an Axially Flowing Conducting Medium
515
The influence of the semiconductor and dielectric properties on surface flashover in silicon-dielectric systems
516
The influence of the semicon-insulation interface on the thermally stimulated current spectra of XLPE cable samples
517
The Influence of the Severity of Fading and Shadowing on the Statistical Properties of the Capacity of Nakagami-Lognormal Channels
518
The influence of the shape of driving signal in measurement of the active points on human skin
519
The influence of the shorting-vias on the integral characteristics of a microstrip resonator
520
The influence of the similarity measure to relevance feedback
521
The influence of the SiN cap process on the electromigration and stressvoiding performance of dual damascene Cu interconnects
522
The influence of the size effect of copper interconnects on RC delay variability beyond 45nm technology
523
The influence of the skewed rotor slots on the magnetic noise of three-phase induction motors
524
The influence of the skin effect on eddy current losses in the plane for single and multidomain wall models
525
The influence of the slip and the speed in the parameter estimation of induction machines
526
The Influence of the Slope Angle of the Ocean–Land Mixed Propagation Path on the Lightning Electromagnetic Fields
527
The influence of the solder joint void on the CCGA package reliability
528
The influence of the source/drain-tie length in a novel self-aligned S/D tie SOI for improving self-heating
529
The influence of the spacings of the electron gun´s triode on its characteristics
530
The influence of the spatiotemporal complementarities of countrywide dispersed wind power on the China electricity system
531
The influence of the spontaneous polarization and viscosity of ferroelectric liquid crystals on the AC field-stabilization effect
532
The influence of the squirrel cage rotor in the estimation of the IM flux linkage at standstill
533
The influence of the stability of the capacitance of compressed-gas capacitors by the contraction of the electric field
534
The influence of the stacked and double material gate structures on the short channel effects in SOI MOSFETs
535
The influence of the starting Cu-Sn phase on the superconducting properties of subsequently reacted internal-Sn Nb3Sn conductors
536
The Influence of the Startup Process of Small Metal-Halide (MH) Lamps on Electronic Ballast Design
537
The influence of the steel core of a multiple conductor on the internal inductance
538
The influence of the stress level on electro isolating oil state from the electric power transformers
539
The influence of the stress time duration on the partial discharge behavior in cast resin insulation
540
The influence of the structure of rotor cage bottom plates on the flow-field performance of O-Sepa classifier
541
The influence of the substrate bias in Junctionless nanowire transistors
542
The influence of the substrate on the thermal stability of InGaAs/InGaAsP quantum wells
543
The influence of the substrate temperature during the pulse laser deposition on the YBCO thin films revealed by AFM
544
The influence of the surface stress on the local buckling of a plate with a circular nanohole
545
The influence of the surface structure on the behavior of arc cathode spots in vacuum
546
The influence of the swaying arm angle range to the torso torque of the humanoid robot during walking
547
The influence of the tape-core layer number of fluxgate sensor to the demagnetization factor
548
The Influence of the Task on Programmer Behaviour
549
The influence of the TCSC on power system transient energy
550
The Influence of the Team Climate on Team Innovation performance: An Empirical Study Based on Chinese High Technology Innovation Teams
551
The influence of the telegraph in the united states society in the 19th century
552
The influence of the temperature in the organic modification of single walled carbon nanotubes
553
The influence of the test fixture on shielding effectiveness measurements
554
The influence of the test methods on the Partial Discharge Inception Voltage value of the mineral oil using the needle — Plane electrode configuration
555
The Influence of the Thermal Effect on CdSe/ZnS Quantum Dots in Light-Emitting Diodes
556
The influence of the thermal electron velocities on forming the intensive high-convergence electron beams
557
The influence of the thermal equilibrium approximation on the accuracy of classical two-dimensional numerical modeling of silicon submicrometer MOS transistors
558
The Influence of the Thermal Pressure of Conditioned Natal Electrodes on the Electrical Strength of the Vacuum Gap
559
The influence of the thickness of electrodes on constriction resistance in nanofabricated sample for physical simulating of the electrical contacts
560
The influence of the third deviation of way above time on the design of Electrical Machines
561
The Influence Of The Time - Difficulty Factor In Large Scale Software Development
562
The Influence Of The Tin Level In Pb-Ca-Sn Positive Grid Alloys On The Life-time Of Valve Regulated Lead-acid Batteries For Standby Applications
563
The influence of the tires on the trafficability
564
The influence of the topology of test circuits on the interrupting performance of circuit breakers
565
The influence of the tortuous channel geometry on lightning electromagnetic field
566
The influence of the transmission path model on reception of digital TV signals in conditions of mobile reception
567
The influence of the UHV transmission line to the TTCs between provincial power grids in CCG
568
The influence of the ultrasonic strain on the polarization of quantum-well heterolasers emission
569
The influence of the uncertainty on monitoring stack emissions in a waste-to-energy plant
570
The influence of the unlocked characteristics of a self-pulsating laser diode on synchronization
571
The influence of the user hand on mobile phone antenna performance in data mode
572
The Influence of the User in Body-Centric Antennas and Propagation at 3–6 GHz—A Rician K -Factor Approach
573
The influence of the visualization task on the simulator sickness symptoms - A comparative SSQ study on 3DTV and 3D immersive glasses
574
The influence of the water on water absorption and density of XLPE cable insulation
575
The influence of the wearable antenna type on the on-body channel modeling at 2.45 GHz
576
The influence of the wearing restorations adjustment on blood flow in the prefrontal area
577
The Influence of the Wetting Layer Morphology on the Nucleation and the Evolution of InAs/GaAs (001) Quantum Dots
578
The influence of the winding layout on the core losses and the leakage inductance in high frequency transformers
579
The influence of the winding type on the noise level of two-speed three-phase induction motors
580
The influence of the YBCO tape arrangement and gap between the two tapes on AC losses
581
The influence of thermal aging on AC dielectric strength of transparent silicone rubbers for HV insulation
582
The influence of thermal and resonance considerations on the design of brazed cylindrical grids
583
The influence of thermal and resonance considerations on the design of brazed cylindrical grids
584
The influence of thermal annealing on sensitivity of silicon MOS-diodes to reducing gases
585
The influence of thermal confinement and temperature-dependent absorption on resonant infrared ablation of frozen aqueous and alcohol targets
586
The influence of thermal cycling methods on the interconnection reliability evaluation within IGBT modules
587
The Influence of Thermal Effects and Dielectric Films on the Electronic Quality of p +-Doped Silicon Processed by Nanosecond Laser
588
The influence of thermal electric power station emissions on the atmosphere of the city
589
The Influence of Thermal Expansion and Plastic Deformation on a Thermo-Electro Mechanical Spherical Asperity Contact
590
The Influence of Thermal Flow Field on Recirculation of Air-Cooled Tower for a Large Power Plant
591
The influence of thermal fluctuations on the electronic transport of alkeno-thiolates
592
The influence of thermal gradients on the characterization of Schottky-barrier diodes
593
The influence of thermal process on electrical conductivity of microstructures: Made by ink-jet painting with the use of ink containing nano sized silver particles
594
The influence of thermal properties of aluminum oxide on electrical insulating materials
595
The influence of thermal properties of materials on electric insulating systems of air-cooled turbogenerators
596
The Influence of Thermal Silicon Nitride Formation on VLSI Fabrication
597
The influence of thermally induced matrix stresses on the superconducting properties of Nb3Sn wire conductors
598
The influence of thermodynamic phase on the retrieval of mixed-phase cloud microphysical and optical properties in the visible and near-infrared region
599
The influence of thermoelectric effects on the self-heating of nanometer CMOS-SOI devices
600
The influence of thin dielectric coatings on LI and AC breakdown strength in SF6 and dry air
601
The Influence of Thin Film Microstructure on Surface Acoustic Wave Velocity
602
The Influence of Threaded Coupling on Rotor System with Rubbing Failure
603
The influence of thresholding method on 1D signal denoising using wavelet theory
604
The influence of thruster dynamics on underwater vehicle behavior and their incorporation into control system design
605
The influence of Ti doping methods on the high field performance of (Nb,Ta,Ti)3Sn multifilamentary wires using Osprey bronze
606
The influence of tidal currents on the REMUS Autonomous Underwater Vehicle
607
The influence of tidal level on periodicity of an undersea geyser: An application of acoustic Doppler current meter
608
The influence of tilted source-drain implants on high-field effects in submicrometer MOSFETs
609
The Influence of Time and Frequency Synchronism to the ATI Interferometric Phase in the Distributed Satellite SAR System
610
The Influence of Time Constraint, and Attribute Numbers on Decision-Making Strategy: A Computer Stimulate
611
The influence of time coordination method on supply reliability
612
The influence of time delay between interference signal and reference signal to the interference cancellation system
613
The influence of time sampling on parameters in the Logan plot
614
The influence of time sampling scheme on kinetic parameters obtained from compartmental modeling of a dynamic PET study - A Monte Carlo study
615
The influence of time scale and gain on criteria for servomechanism performance
616
The influence of time-criticality on Situation Awareness when retrieving human control after automated driving
617
The influence of time-varying channels synchronized with commercial power supply on PLC equipments
618
The Influence of Timing Error on the Performance of Optical Pulse PPM System in Atmospheric Turbulent Channels
619
The influence of TiN ARC thickness on stress-induced void formation in tungsten-plug vias
620
The Influence of TiN Thickness and \\hbox {SiO}_{2} Formation Method on the Structural and Electrical Properties of \\hbox {MgB}_{2} Conductors Manufactured Using Laboratory-Made Boron
811
The Influence of Wireless 802.11g LAN Encryption Methods on Throughput and Round Trip Time for Various Windows Operating Systems
812
The Influence of Wood Pole Preservatives on Wood Fire and Electrical Safety
813
The Influence of Wood Pole Preservatives on Wood Fire and Electrical Safety
814
The influence of word normalization in English document clustering
815
The influence of workload characterization in the performance analysis of telecollaboration
816
The influence of workplace friendship on work values: Taiwan and China
817
The influence of WPA2 security on the UDP performance of IPv4 and IPv6 using 802.11n WLAN in Windows 7-Windows 2008 environment
818
The influence of write current offset on bit-shift
819
The influence of wye and delta connection on induction motor losses taking slot opening and skew effect into account
820
The influence of xenon on sealed-off CO2lasers
821
The Influence of X-ray Damage on Electron-Induced Interface Degradation in MOS Capacitors
822
The Influence of X-Ray Spectra Filtration on Image Quality and Patient Dose in the GE VCT 64-Slice Cardiac CT Scanner
823
The influence of X-valley barrier height at calculation of IV-characteristics of GaAs/AlAs based RTD
824
The influence of Young´s modulus on roundness in silicon sphere fabrication
825
The influence of Young´s modulus on roundness in silicon sphere fabrication [Avogadro constant]
826
The Influence of Zn-Diffusion Depth on the Static and Dynamic Behavior of Zn-Diffusion High-Speed Vertical-Cavity Surface-Emitting Lasers at an 850 nm Wavelength
827
The influence of ZnO and electrode thickness on the performance of thin film bulk acoustic wave resonators
828
The influence of ZrO2 addition on phase composition in the Nd-Dy-Fe-B system and improved corrosion resistance of the magnets
829
The Influence on an Activity´s Total Float of a Change in its Duration in Networks with Generalized Precedence Relations (GPRs)
830
The influence on characteristics of movable loosely coupled transformer from metal units in urban railway system
831
The Influence on EHT Regulation of the Harmonic Content in the Retrace Voltage of a TV Horizontal Output Stage
832
The influence on environmental adjustment levels of mind and body caused by digital games
833
The Influence on Finance Competition of Local Governments to Foreign Direct Investment Inflows in China
834
The influence on FRD with different encircled energy
835
The influence on harmonic propagation of the resistive shunt harmonic impedance location along a distribution feeder and the influence of distributed capacitors
836
The Influence on Hydrogen Permeation through Steel of Surface Oxide Layers and Their Characterisation Using Nuclear Reactions
837
The influence on output spot of large core fibers in noncentral incidence
838
The influence on sensitivity of hardware Trojans detection by test vector
839
The influence on SMEs entrepreneurial process within a cluster business network
840
The Influence on SOD and Amylase Isozymein Wheat Exposed to Enhanced Ultraviolet-B Radiation Irradiated by He-Ne Laser
841
The influence on soil breathing by induce reformation of low-quality forest in Lesser Khingan Range
842
The influence on the cardiac function after excessive exercise is loaded: an evaluation by the way of electrocardiogram and echocardiogram before and after the disabled wheelchair marathon
843
The influence on the electrical characteristics due to impurity in insulating liquids
844
The Influence on Value Driver of Customer Equity Exerted by Culture Factor
845
The influence op the Bθ field on MPOS performance
846
The influence parameters /spl beta//sub 1 / and /spl beta//sub 2 / have on bibeta spline curved surface
847
The influence path analysis of OCB on innovation performance: Based on the intermediary role of knowledge management
848
The influence prediction of the current waveforms on the vibrational behaviour of switched reluctance motors
849
The Influence Regularity of Structural Parameters of Fluid Jetting Dispensing
850
The influence research of large-scale wind power on out-of-step oscillation of the Northwest China Power Grid
851
The influence study of wavelet properties on transient power disturbance signals detection
852
The Influence Study on the Basin´s Runoff Yielding from the Precipitation Change - A Case Study in Zhelin Basin
853
The influence the angles of delay and overlap in the rate of harmonic in HVDC
854
The influenced factors of internet´s buying behavior for undergraduate students
855
The influenced factors to online consumer trust: an empirical research on B2C e-commerce in China
856
The influences and countermeasures of transmission line differential protection AND AUTO-RECLOSing when wind farm connected
857
The influences and countermeasures of wind farm access to transmission line differential protection
858
The Influences of ACF with Bonding Processes on COF under Thermal Cyclic Loading
859
The influences of ambiguity phase aberration profiles on focusing quality in the very near field-part I: Single range focusing on transmission
860
The influences of ambiguity phase aberration profiles on focusing quality in the very near field-part II: dynamic range focusing on reception
861
The influences of annealing process on the characteristics of 0.95 (Na0.5Bi0.5)TiO3-0.05 BaTiO3 thin films
862
The influences of annealing temperature on the microstructure and electric properties of ZnO varistors
863
The Influences of Boundary Shapes on Polarization Characteristics and Lasing Modes in Broad-Area Vertical-Cavity Surface-Emitting Lasers With Cryogenic Detuning: Regular Versus Chaotic Cavities
864
The influences of cardiac mechano-electrical feedback on action potential duration
865
The influences of climatic factors on electricity prices in liberalized market in Finland
866
The Influences of Cloud Computing to the Traditional Software Project and Our Corresponding Strategies
867
The influences of coating alumina on the RF characteristics of packaged surface acoustic wave devices
868
The influences of communication models on the simulated effectiveness of V2X applications
869
The influences of communication models on the simulated effectiveness of V2X applications
870
The Influences of Computer-Assisted Translation Teaching
871
The influences of customer citizenship behaviors on brand reputation
872
The influences of diode parameters on conversion efficiency of RF-DC conversion circuit for wireless power transmission system
873
The influences of dynamic gates on cut sequence sets model
874
The influences of emotional intensity for happiness and sadness on walking
875
The Influences of Employees´ Emotions and Cognition on IT Adoption: Some Perspectives from Iran
876
The influences of fault type and topology on fault model performance and the implications to test and testable design
877
The influences of Flipped Classroom: A meta analysis
878
The influences of fuzzy demand forecast on bullwhip effect in a serial supply chain
879
The influences of global and local cues on the synchronization rate of interconnected oscillator networks subject to time delays
880
The influences of grain size distributions on thermal-stresses in Cu-TSV
881
The influences of green perceived quality and green brand awareness on green brand equity: The mediation effect of green perceived risk
882
The Influences of Heterogeneous Reaction on Particle Optical Properties: A Laboratory Case of SO2 on Hematite and Hematite-NaCl Mixture
883
The Influences of Humidity on PD Characteristics in a Void in Polyvinyl Chloride (PVC)
884
The influences of ICs´ no-connection pins on noise immunity
885
The Influences of Inflation and Time-Value of Money on an EOQ Model for Both Ameliorating and Deteriorating Items with Partial Backlogging
886
The Influences of Liquidity Surplus on the Price of Fuel Oil Future in China
887
The influences of low temperature on system performance of inductive pulsed power supplies
888
The influences of magnetized water on physical properties of concrete
889
The influences of media choice on help desk performance perception
890
The influences of message jitter on linear interpolation for electronic transformer data synchronization
891
The Influences of Network Interpersonal Interaction among College Students
892
The influences of nitrogen, helium, hydrogen, or argon dilution on plasma-enhanced chemical vapor deposited a-SiNx:H
893
The influences of organizational memory and market information processes on product innovation
894
The influences of parameters on performance of hybrid axial magnetic bearing
895
The influences of parasitic capacitances on the effectiveness of anti-phase technique for common mode noise suppression
896
The influences of particle sizes on the dielectric properties of PEI/(Ba0.8Sr0.2)(Ti0.9Zr0.1)O3 composites
897
The Influences of Powder Processing Variables on the Properties of Bi-2223/Ag Tapes
898
The influences of power grid structure on self-organized criticality
899
The influences of power supply on lean NOx removal by plasma-facilitated selective catalytic reduction
900
The influences of pressure-side winglet on aerodynamic performance of compressor cascade at different incidences
901
The influences of proportion of flexible epoxy resin on dielectric properties
902
The influences of RAP on the performance of cement stabilized crushed stone base
903
The influences of rapid-thermal annealing on the characteristics of Sr0.6Ba0.4Nb206 thin film
904
The influences of reflected electrons on the REB potential and on the energy distribution function of the REB electrons
905
The influences of refractive index dispersion on the modal gain of a quantum-well laser
906
The Influences of Social Networks on Phishing Vulnerability
907
The influences of social software characteristics on students´ knowledge sharing behavior
908
The Influences of Solder Composition and Pad Finish on the Reliability of Fine Pitch BGA Solder Joints
909
The influences of solid surface on the propagation of creepage discharge in insulating liquids
910
The influences of stress on the growth of Ti and Ni silicide thin films on (001)Si
911
The influences of substrate and annealing temperatures on the characteristics of SrBi4Ti4O15 thin films
912
The influences of system quality and service quality to consumer satisfaction and loyalty in on-line game industry
913
The influences of temperature cycling parameters on the reliability of the solder joints in the high-density package assemblies by Taguchi Method
914
The influences of the gyro sensors´ errors on the attitude calculus
915
The Influences of T-Joint Core Design on No-Load Losses in Transformers
916
The Influences of Transaction and Partnership Characteristics on Interorganization System Integration in Manufacturer-Supplier Dyads
917
The influences of trunk horizontal vibration to the head-neck complex
918
The influences of trust on choices of mode of trade credit
919
The Influences of Tween60 and Rhamnolipid on the Bioremediation of n-Hexadecane
920
The Influences of Water and Oxygen Contents on Length of Atmospheric Pressure Plasma Jets in Ar/H2O and Ar/O2 Mixtures
921
The influences on regional economy growth by trans-regional M&As of Chinese enterprises
922
The influencing factor analysis of water-saving irrigation technology adopted by farmer: A case study in Heilongjiang
923
The Influencing Factor for CO2 Absorption of Li4SiO4 at High Temperature
924
The Influencing Factor on Test of Parameter of the Rock-Soil Thermal Properties
925
The influencing factors analysis of Chinese carbon emissions based on the co-integration analysis with the help of grey correlation analysis(GRA)
926
The influencing factors and formation mechanism of the dark ring of monocrystal silicon cells
927
The Influencing Factors Discussions on the Subway Tunnel and Station Units Thermal Environment
928
The Influencing Factors of China´s Carbon Intensity and Policy Choices
929
The influencing factors of disruptive innovation in China´s high-tech SMEs: A case study
930
The influencing factors of enhancement of Employee Enthusiasm in mining industry: Case study of Mongolia
931
The influencing factors of foreign direct investment in Chinese Services
932
The Influencing Factors of Group Learning: An Analysis
933
The Influencing Factors of Internal Controls Information Disclosure in Listed Companies
934
The Influencing Factors of Knowledge Sharing Behavior on College Students in Virtual Communities
935
The Influencing Factors of New Product Development Performance: Market Orientation, Organizational Learning and Organizational Innovation
936
The Influencing Factors of R&D Input and the Application of Knowledge Production Function-Based on the Panel Data of China
937
The Influencing Factors of Student Teachers´ Entrepreneurial Learning Behavior
938
The influencing factors of viewing network pirate film in China
939
The Influencing Factors of Volume Index on Mix Design of Asphalt Mixture
940
The Influencing Factors to Arterial Coordinate Control System
941
The influencing measurement study of symbiotic environment on the logistics enterprises´ profit
942
The Influencing Mechanism of Online Perceived Value and Switching Costs on Online Customer Loyalty
943
The influencing mechanism of personality traits on team performance: An empirical study based on creative product development project
944
The influencing of sputtering alumina on the magnetics of hot-pressed Mn-Zn ferrite
945
The influencing of the surface structure on the emission properties of the Sc-Ba dispensed cathodes
946
The influential effect of the strength of interfirm network on new product development
947
The Influential Factor of the Responsiveness in Intangible Cultural Heritage Tourism
948
The Influential Factors and Challenges in Implementing E-Government in Cambodia
949
The Influential Factors in Employing IRAN E-Government Portal: Survey of Information Quality
950
The Influential Factors of Body Image among High School Students
951
The Influential Factors of China´s Foreign Exchange Reserves
952
The influential factors of knowledge transfer in supplier network
953
The influential factors of SMS usage among youth: an exploratory study to Western exchanging students in Asia
954
The Influential Factors On The Giant Magnetoresistance For The [FeNi/Cu/Co/Cu]/sub N/ Spin Valve Multilayered Films
955
The Influential Mechanism of Rebound Effect within Chinese Energy Efficiency
956
The influnece of magnetisation pattern on the performance of a cylindrical, moving magnet ltnear actuator
957
The Info Age law firm
958
The InfoFinder agent: learning user interests through heuristic phrase extraction
959
The InfoPad multimedia terminal: a portable device for wireless information access
960
The InfoPad project: review and lessons learned
961
The InfoPad user interface
962
The Info-plosion Project
963
The informal economy in the sector of mobile telephony in Ivory Coast: Survey of the productive and social role of an original activity
964
The informal meetings
965
The informal modeling of input-preprocessing subsystems for scientific research
966
The informal structure of project organizations
967
The informatics requirements for human brain atlasing
968
The Informatics Systems Infrastructure in Coal Preparation Plant from Romania
969
The information & communications technological system of China
970
The information acquisition and error control in the wireless infrared temperature measurement system
971
The Information Age cometh
972
The information age: challenges and opportunities for control and engineering
973
The Information Agent: an infrastructure agent supporting collaborative enterprise architectures
974
The information analysis and decision support system for national fitness based on Internet
975
The Information and Communication Technologies in tourism degree courses — The Portuguese reality
976
The Information Assurance Practices of Cloud Computing Vendors
977
The Information Battlespace preparation experiment
978
The Information Bottleneck Revisited or How to Choose a Good Distortion Measure
979
The Information Capacity of the Human Fingertip
980
The Information Carried by Scattered Waves: Near-Field and Nonasymptotic Regimes
981
The information carrying in vector quantized images
982
The information content in sorting algorithms
983
The information content measure as a performance criterion for feature selection
984
The information content of aberrated- and non aberrated images generated by coherently- or incoherently illuminated objects
985
The Information Content of Air-Ground Messages
986
The Information Content of AVHRR, MSS, TM and SPOT data in the Skagerrak Sea
987
The Information Content of Charts: Algorithm and Evidence from Hong Kong Stock Market
988
The information content of cockpit displays
989
The information content of demodulated speech
990
The information content of high, low and close prices
991
The Information Content Of Maestro-1 Images
992
The information content of MR images
993
The information content of multiple receive aperture SAR systems
994
The Information Content of Synthetic Aperture Radar Images of Terrain
995
The information content of technical trading rules: Evidence from US stock markets
996
The Information Content Of The Cardiac Electrogram At The Stimulus Site
997
The Information Content of the Financial Cross Correlation Matrix: Evidence from Shanghai Stock Exchange
998
The Information Content of Titles in Engineering Literature
999
The information content of turbine engine data - A chance for recording-based life usage monitoring
1000
The information content of X-ray CT images and its application in image analysis