<< مقالات لاتين فني مهندسي >>
<< بر اساس عنوان >>
1
Investigation of the eddy-current anomaly in electrical sheet steels
2
Investigation of the effect of “Orange Peel” surface texture on the laser sintered part
3
Investigation of the effect of a “cold” electron tail on trench charging
4
Investigation of the effect of adsorption induced surface stress on the resonant frequency of PZT membrane based biosensors
5
Investigation of the effect of aging variables on the impact behaviour of Al 6061 alloy and its composites
6
Investigation of the effect of an increased supervisory signal power in a high-loss loopback monitoring system
7
Investigation of the Effect of Array Geometry on the Performance of Free-Space Optical Interconnects
8
Investigation of the effect of blocking potential on the static breakdown voltage and discharge initiation in pseudospark switches
9
Investigation of the Effect of Boundary Edges Placed on an Infinite Conducting Surface and Effective Treatment Using Virtual Vertices
10
Investigation of the effect of compensation ratio (R
C
) on solar cells fabricated with solar grade (SoG) czochralski silicon
11
Investigation of the effect of conductor loss and mismatch on the tunneling through frequency selective surfaces
12
Investigation of the effect of conductor temperature on AC power line corona
13
Investigation of the effect of continuously variable transmissions on ground robot powertrain efficiency
14
Investigation of the effect of control scheme for the SMES with solid-state phase shifter (SuperSMES) on power system stabilization
15
Investigation of the effect of current and voltage transformers´ errors on a differential-like impedance relaying algorithm — Protection from a probabilistic view
16
Investigation of the effect of cylindrical dielectric capsulation on performance of 2.5GHz dipole
17
Investigation of the effect of design aspects on dyanamic control of a binary distillation column
18
Investigation of the Effect of Electromagnetic Absorption in Conditions of a Relative Motion of Components in He II
19
Investigation of the effect of fabric in on-body communication using Finite Difference Time Domain technique at 60GHz
20
Investigation of the effect of face regions on local shape descriptor based 3D face recognition
21
Investigation of the Effect of Fading Correlation on Performance of MIMO Systems Using an RCS Channel Model
22
Investigation of the effect of fiber diameter variability via recording from tendon via of single fiber electromyography
23
Investigation of the effect of Ga doping on the thermoelectric properties of the AlPdMn quasicrystalline system
24
Investigation of the effect of gate voltage on the performance of organic bulk hetero-junction based phototransistor
25
Investigation of the effect of geometrical features of carotid artery plaque on turbulence intensity using Doppler ultrasound and particle image velocimetry
26
Investigation of the effect of hard disk drive unbalance on repeatable and nonrepeatable runout
27
Investigation of the effect of heat leak in loop heat pipes with flat evaporator
28
Investigation of the effect of helix tape-thickness on the performance of plasma-filled helix traveling-wave tubes
29
Investigation of the effect of high-energy electron beam irradiation on the process of formation of intermetallic phases in Mo-Ni system
30
Investigation of the effect of hollow cathode neutralizer location on hall effect thruster efficiency
31
Investigation of the effect of humidity on partial discharge activity in stator windings
32
Investigation of the effect of injection locking between pump lasers on a redundant pumping scheme for erbium-doped fiber amplifiers
33
Investigation of the effect of inlet radius on the response time of a transmission type ozone sensor
34
Investigation of the effect of I-ZnO window layer on the device performance of the Cd-free CIGS based solar cells
35
Investigation of the effect of large wind power integration in the Greek mainland system
36
Investigation of the effect of magnet thickness on motor losses of PM BLDC machines using parametric approach method
37
Investigation of the effect of magnet thickness on output power and torque of PM BLDC machines using parametric approach method
38
Investigation of the effect of malfunctioned tags on the delay performance of RFID system
39
Investigation of the effect of metallic frames on 4G eyewear antennas
40
Investigation of the Effect of Microstructure and Grain Boundaries in Nanostructured CMR Thin Films Using Scanning Tunneling Microscopy (STM) and Local Conductance Map (LCMAP)
41
Investigation of the effect of mutual coupling of grounding conductors
42
Investigation of the effect of nonlinear B/H loops on the calculation of eddy-current losses
43
Investigation of the Effect of Operating Temperature on Electrical Characteristics of A-Si: H/a-SiGe: H Hetero-Structure Solar Cells
44
Investigation of the Effect of PCB Base Materials and Pad Surface Finish on the Thermal Fatigue Life of Lead-free Solder Joints of PBGA and Passive Resistors
45
Investigation of the effect of playing video games on visual attention and brain hemodynamics with functional near infrared spectroscopy
46
Investigation of the effect of pole shape on braking torque for a low power eddy current brake by finite elements method
47
Investigation of the Effect of Processing Variables on the Structure and Morphology of Nano-TIM
48
Investigation of the effect of reflect array element periodicity on aperture efficiency
49
Investigation of the effect of repetitive voltage surges on epoxy insulation
50
Investigation of the Effect of Resistivity and Thickness on the Performance of Cast Multicrystalline Silicon Solar Cells
51
Investigation of the Effect of Sb Doping on the Thermoelectric Properties of the Ge-based clathrates, Ba8Ga16+xSbxGe30-2x
52
Investigation of the effect of substrate material on the performance of microstrip antenna
53
Investigation of the effect of support rod permittivity on TWT performance
54
Investigation of the effect of the ESD to the transient voltage suppressor
55
Investigation of the effect of the extension implant energy on deep submicron CMOS device performance
56
Investigation of the effect of the insertion of series capacitors in high voltage transmission lines on the settings of distance protection
57
Investigation of the effect of the slot and shunt on the transient and steady state current response of a commercially available lighting ballast
58
Investigation of the effect of thermomagnetic treatment on structure changes and properties of alnico alloys
59
Investigation of the effect of thickness, taper ratio and aspect ratio on fin flutter velocity of a model rocket using response surface method
60
Investigation of the effect of three-dimensional smoothing on multiview stereo images
61
Investigation of the effect of training and prediction window sizes on neural financial prediction models
62
Investigation of the effect of trapped modes in circular waveguide mode converters
63
Investigation of the effect of variable viewing angle with airborne multiangular measurements
64
Investigation of the effect of winding distribution and slot opening on performance of an axial flux hysteresis motor
65
Investigation of the Effectiveness and Robustness of an MEMS-Based Structural Health Monitoring System for Composite Laminates
66
Investigation of the Effectiveness of a Buried Carbon Layer to Suppress Transient Diffusion Effects in SiGe HBTs
67
Investigation of the effectiveness of DC power bus interplane capacitance in reducing radiated EMI from multi-layer PCBs
68
Investigation of the effectiveness of desktop grid system based on MPICH-2
69
Investigation of the effectiveness of video quality metrics in video pre-processing
70
Investigation of the effects of aluminum treatment on silicon solar cells
71
Investigation of the effects of calcination temperature on the structure of LaMgAl
11
O
19
for thermal barrier coating applications
72
Investigation of the Effects of Chirped RZ Signals in Reducing the Transmission Impairments in R-SOA-Based Bidirectional PONs
73
Investigation of the effects of compact fluorescent lamps in power distribution systems
74
Investigation of the effects of compression and flow balancing in wireless sensor networks lifetime
75
Investigation of the effects of design parameters on output characteristics of capacitive angular displacement sensors by finite element field modelling
76
Investigation of the effects of differing investment programs and macroeconomic parameters on long-term power transmission planning. I. Models
77
Investigation of the effects of differing investment programs and macroeconomic parameters on long-term power transmission planning. II. Case study results
78
Investigation of the effects of DSP timer jitter on the measurement of a PWM controlled inverter output voltage and current
79
Investigation of the effects of fast transients on a transformer´s paper insulation
80
Investigation of the Effects of Feedback Channel Losses for Wireless TCP Experiments
81
Investigation of the effects of homogeneous and heterogeneous solar irradiations on multicrystal PV module under various configurations
82
Investigation of the Effects of Low Temperature Heat Treatments on the Microstructure and Properties of Multifilamentary, Tube-Type
Strands
83
Investigation of the effects of microbubble shell disruption on population scattering and implications for modeling contrast agent behavior
84
Investigation of the effects of myocardial anisotropy for shear wave elastography using acoustic radiation force and harmonic vibration
85
Investigation of the effects of nano-filler on dielectric properties of epoxy based composites
86
Investigation of the effects of network density on the optimal number of clusters in hierarchical Wireless Sensor Networks (WSNs)
87
Investigation of the effects of nonideal situations on the characteristics of switched-capacitor networks
88
Investigation of the effects of nonlinear model of super-capacitors in local DC microgrids supplied by renewables
89
Investigation of the effects of nonverbal information on werewolf
90
Investigation of the effects of precipitation on parabolic antennas employing linear orthogonal polarisation at 11 GHz
91
Investigation of the effects of pressure ratios on arc behavior in a supersonic nozzle
92
Investigation of the effects of scintillator pixel shape, surface treatment and optical coupling on the performance of Si-PM based BGO detectors
93
Investigation of the effects of stimulation side on middle latency auditory evoked magnetic fields
94
Investigation of the effects of the control parameters and outputs on power factor of switched reluctance motor drive systems
95
Investigation of the effects of the retention groove location and dimensions of threaded glass fiber post on biomechanical responses of the restorative system
96
Investigation of the effects of transducer Parameters on adaptive MV beamformers in medical ultrasound applications
97
Investigation of the effects of transmission faults upon a renewable energy generating plant
98
Investigation of the effects of waterline switch capacitance on the electrical prepulse of the Z-accelerator
99
Investigation of the effects on stability of foot rolling motion based on a simnle walking model
100
Investigation of the Efficiency Boost Due to Spectral Concentration in a Quantum-Dot Based Luminescent Concentrator
101
Investigation of the efficiency of Moment Method solutions based on expansion functions defined in an infinite domain
102
Investigation of the efficiency of multi-variable block transforms for motion compensation
103
Investigation of the efficiency of the elliptic curve cryptosystem for multi-applications smart card
104
Investigation of the efficiency of the multigrid method for finite element electromagnetic field computations using nested meshes
105
Investigation of the efficiency of the multi-grid method for finite element electromagnetic field computations using nested meshes
106
Investigation of the efficiency-droop mechanism in a GaN based blue light-emitting diodes using a very-fast electrical-optical pump-probe technique
107
Investigation of the Efficiency-Droop Mechanism in Vertical Red Light-Emitting Diodes Using a Dynamic Measurement Technique
108
Investigation of the electric field components of tDCS via anisotropically conductive gyri-specific finite element head models
109
Investigation of the electric field inside differential antenna-in-package
110
Investigation of the Electric Strength Recovery Process in the Pseudospark Switch with a High Pulse Repetition Rate
111
Investigation of the electric wind velocity subject to the electrode system design in plasma chemical reactor
112
Investigation of the electrical and chemical processes causing the failure event in a copper sulfide related transformer failure
113
Investigation of the electrical and the dielectric properties of the new type insulator LB films
114
Investigation of the electrical and thermal performance of a PV/T hybrid system
115
Investigation of the electrical breakdown of transformer oil in Skowronski´s cup-sphere spark gap
116
Investigation of the electrical characteristics of reteroepitaxial structures as function of microrelief and manufacturing technology features
117
Investigation of the Electrical Field Sensitivity of Sub-
Y–Ba–Cu–O Detectors
118
Investigation of the Electrical Performances of µtrench PCM at High Operating Temperature
119
Investigation of the Electrical Properties of Elastic Syntactic Foam
120
Investigation of the electrical properties of PLD-grown Bi
2
Te
3
and Sb
2
Te
2
121
Investigation of the electrical properties of undoped gallium arsenide epitaxial layers
122
Investigation of the electrical system design concept and grid connection of ocean energy devices to an offshore compressed energy storage system
123
Investigation of the electrocatalytic function of Fe
3
O
4
nanoparticles and the application as cefotaxime sodium sensor
124
Investigation of the electrode coating influence on the frequency temperature characteristics of the resonators operating at the rotated Y-cut Ca
3
TaGa
3
Si
2
O
14
single crystals
125
Investigation of the electrode phenomena in a radial multichannel pseudospark switch
126
Investigation of the electrode surface of a liquid quality sensor by local impedance spectroscopy
127
Investigation of the electromagnetic interference effect on the speed sensor of an aircraft starter generator
128
Investigation of the Electromagnetic Interference Threat Posed by a Wireless Network Inside a Passenger Aircraft
129
Investigation of the electromagnetic near field around an offshore wind farm
130
Investigation of the electromagnetic simulation results variation of a hydro electrical generator
131
Investigation of the electron mobility in strained Si
1-x
Ge
x
at high Ge composition
132
Investigation of the electron non-radiative transition in GaInNAs/GaAs single quantum well structures by using a piezoelectric photothermal spectroscopy
133
Investigation of the electron transfer characteristics in multi-δ-doped GaAs FET´s
134
Investigation of the Electronic Crosstalk in Terra MODIS Band 28
135
Investigation of the Electron-Injection Spread in Barrier-Engineered
NAND
Flash Memories
136
Investigation of the Electron-Ion Hybrid instability in a collisional environment
137
Investigation of the electrophysical characteristics of a microwave resonator type plasma generator with partial plasma filling of resonating volume
138
Investigation of the Electrostatic Discharge Performance of GaN-Based Light-Emitting Diodes With Naturally Textured p-GaN Contact Layers Grown on Miscut Sapphire Substrates
139
Investigation of the electro-thermal stress affecting IGBT modules in high-pulsed power resonant converters
140
Investigation of the Empirical Mode Decomposition Based on Genetic Algorithm Optimization Schemes
141
Investigation of the energy distribution of stress-induced oxide traps by numerical analysis of the TAT of HEs
142
Investigation of the energy pooling reaction CO(a)+CO(a)/spl rarr/CO/sup +/+CO(X) in optically-excited laser applications
143
Investigation of the Energy Regeneration of Active Suspension System in Hybrid Electric Vehicles
144
Investigation of the energy resolution and charge collection efficiency of Cd(Zn)Te detectors with three electrodes
145
Investigation of the Energy Response of RADFET for High Energy Photons, Electrons, Protons, and Neutrons
146
Investigation of the energy transfer and consumption of adaptive structures
147
Investigation of the energy-dependent charge dynamics in InAs SAQD´s with ultrafast scanning tunneling microscopy
148
Investigation of the enhancement factor in a transient region between regular and chaotic dynamics
149
Investigation of the envelope and phase information for improved speech perception using an acoustic simulation model for Cochlear Implants
150
Investigation of the EPDM copolymer using the pressure wave propagation method
151
Investigation of the Epitaxial Graphene/p-SiC Heterojunction
152
Investigation of the Equivalent Circuit Parameters and Design of a Dual Polarised Dual Frequency Aperture Coupled Microstrip Antenna
153
Investigation of the erosion characteristics of cathodes with poor conductivity in cathodic vacuum arc plasma sources
154
Investigation of the erosion drop fraction for liquid-metal explosive-emission cathodes
155
Investigation of the error introduced by the thin wall approximation in shielding problems
156
Investigation of the error performance of Tunstall coding
157
Investigation of the ESD induced clock disturbances in portable electronic products
158
Investigation of the Evaluation of the PD Severity and Verification of the Sensitivity of Partial-Discharge Detection Using the UHF Method in GIS
159
Investigation of the excitation of ion beams in the explosive mode emission of semiconductors
160
Investigation of the exhibition of facial expressions within human computer interaction
161
Investigation of the factors governing water absorption in HV composite insulation
162
Investigation of the Failure Mechanism for an S-Band Pillbox Output Window Applied in High-Average-Power Klystrons
163
Investigation of the failure mechanism of insulation subjected to repetitive fast voltage surges
164
Investigation of the failure mode formation in BGA components subjected to JEDEC drop test
165
Investigation of the Faraday effect in tellurite glass optical fibre
166
Investigation of the fatigue origin and propagation in submicrometric silicon piezoresistive layers
167
Investigation of the feasibility of 3D synthetic aperture imaging
168
Investigation of the feasibility of a superconducting “self-healing” DC grid on a LNG carrier
169
Investigation of the feasibility of designing homing aircraft flight control systems for minimum probabilistic error
170
Investigation of the ferroelectric materials behaviour in microwave band
171
Investigation of the fibre to chip coupler designed on SOI platform with subwavelength grating
172
Investigation of the field distribution inside rooms located near the basic antenna stations
173
Investigation of the field uniformity of a mode-stirred chamber using diffusers based on acoustic theory
174
Investigation of the flashover of a FRP hot stick while in use for live line work at 500 kV
175
Investigation of the flat beam model of the beam-beam interaction
176
Investigation of the flicker emission by grid connected wind turbines
177
Investigation of the Flip-Chip Package With BCB Underfill for W-Band Applications
178
Investigation of the flow field inside an oil distribution mechanism at high speed
179
Investigation of the flow of ions in plasma opening switch
180
Investigation of the flow properties of adhesives in electronic packaging
181
Investigation of the focusing properties of some fractal arrays
182
Investigation of the forces on a submerged cylinder due to surface water waves
183
Investigation of the forces produced by a new electromagnetic planar actuator
184
Investigation of the Formation Mechanism of Hemispherical Grained Silicon (HSG-Si) on Undoped and Doped Amorphous Silicon for DRAM Applications
185
Investigation of the formation mechanism of perovskite phase in (1-x)PST-xPT ceramics prepared by one-step-sintering-method
186
Investigation of the formation of the Bi-2223 phase in multifilamentary Bi-2223/Ag tapes by in situ high temperature neutron diffraction
187
Investigation of the formation of undercut during the fabrication of silicon microchannels by electrochemical etching
188
Investigation of the forming process and characteristics of Al-BSF in silicon solar cells
189
Investigation of the forming program failture in 1T1R structure
190
Investigation of the four-gate action in G
4
-FETs
191
Investigation of the fractal behavior of the polypyrrole
192
Investigation of the frequency characteristics of the electrodes for EEG measurement at high frequencies
193
Investigation of the frequency characteristics of vibration and jet diluent
194
Investigation of the frequency correlation between radiation patterns of unintentional emitters for large frequency bands
195
Investigation of the frequency dependent antenna transfer functions and phase center position for modeling off-ground GPR
196
Investigation of the frequency dispersion effect in the Root-model applied to conventional and floating-gate MESFETs
197
Investigation of the Frequency-Doubling Efficiency Saturation in Periodically Poled KTP
198
Investigation of the functional effects of KCNJ2-linked short QT syndrome on electrical conduction at purkinje-ventricle junction at low- and high- frequencies
199
Investigation of the fundamental interactions among the ingredients of flux by the group contribution method
200
Investigation of the gain regimes and gain parameters of the free electron laser dispersion equation
201
Investigation of the gap edge density of states at oxidized Niobium surfaces by RF measurements
202
Investigation of the Gassing Properties of Dielectric Liquids
203
Investigation of the gas-solid flows in a circulating fludisied bed with multi-cyclone separators by electrical capacitance tomography
204
Investigation of the gate dielectric oxidation treatment in trench gate power devices
205
Investigation of the gate-driven effect and substrate-triggered effect on ESD robustness of CMOS devices
206
Investigation of the generation source of decameter-scale sub-auroral ionospheric irregularities during geomagnetically quiet periods
207
Investigation of the glassy layer formed at the top of porous silicon films
208
Investigation of the global positivity of polynomials via linear optimization
209
Investigation of the GPR reflection pattern for shallow depths on a test site
210
Investigation of the GPS signals ionospheric correction: Ionospheric TEC prediction over equatorial
211
Investigation of the growth process and optical transitions as a function of Ga content in CuIn
1−x
Ga
x
Se
2
thin films at 570 °C
212
Investigation of the Gunn oscillator with barrel-shaped open resonator
213
Investigation of the Gurson Damage by Using the Indentation Fatigue Tests
214
Investigation of the gyromagnetic permeability of amorphous CoFeNiMoSiB manufactured by different techniques
215
Investigation of the gyro-resonance region modes by using the MoM for plasma column loaded cylindrical waveguide
216
Investigation of the gyrotron oscillator as a nonlinear electrodynamical system
217
Investigation of the Hammerstein hypothesis in the modeling of electrically stimulated muscle
218
Investigation of the handling qualities of fighter aircraft with relaxed static stability at high angles of attack using a holistic simulation approach
219
Investigation of the harmonic behavior of three phase transformer under nonsinusoidal operation using finite element and wavelet packets
220
Investigation of the harmonic content and its impact on the performance of induction motor
221
Investigation of the Harmonic Optimization Approaches in the New Modular Multilevel Converters
222
Investigation of the harmonic response of a photovoltaic system with a solar emulator
223
Investigation of the heat caused autophagy in living cells
224
Investigation of the heat cycleq of a CO2 hydrate using plate type heat exchangers
225
Investigation of the heat distribution around cable ducts in a desert climate
226
Investigation of the heat handling capabilities of DIII-D neutral beamline internal components
227
Investigation of the heat transfer coefficient on the fins for total enclosed fan cooled permanent-magnet motor
228
Investigation of the Hemodynamic Response in Near Infrared Spectroscopy Data Analysis
229
Investigation of the hermeticity of BCB-sealed cavities for housing (RF-)MEMS devices
230
Investigation of the high current stages in pseudospark discharge
231
Investigation of the high efficiency microcrystalline silicon solar cell
232
Investigation of the High Frequency Operation of Gm-C Integrators for Continuous Time Filters
233
Investigation of the high performance Nickel-matrix Oxide cathode
234
Investigation of the high power integrated uni-traveling carrier and waveguide integrated photodiode
235
Investigation of the high temperature stability of TiN-Al2O3-TiN capacitors for sub 50nm deep trench DRAM
236
Investigation of the high-frequency performance of AlGaAs/GaAs HBTs down to 20 K
237
Investigation of the High-Temperature Operation of AlGaN/GaN HFETs via Studying the Impact of Temperature Dependency of Drift Transport Characteristics
238
Investigation Of The Hollow Cavity Effects On The Breakdown Voltage Characteristic Of A-single-gap Pseudospark Device
239
Investigation of the hollow-cathode, hollow-anode microsecond high-current glow discharge
240
Investigation of the Hot Embossing Technology for Low-Cost Antennas Printed on Polymer Substrates
241
Investigation of the hot-carrier degradation in Si/SiGe HBT´s by intrinsic low frequency noise source modeling
242
Investigation of the HTS microstrip filters based on dual-mode ring resonators
243
Investigation of the humidity sensitivity in Fe
3
O
4
thin films using porous ZrO
2
ceramics as carriers
244
Investigation of the hybrid SIW-CPW integrated guided wave structure
245
Investigation of the hydromotion and ion and electron temperatures of stagnating Z-pinch plasma using time- and space-resolved K-line spectra
246
Investigation of the hydrophobicity transfer property of polymeric insulating materials through artificial pollution layers
247
Investigation of the hysteresis loop and the magnetic anisotropy of Nd-Fe-B based permanent magnets
248
Investigation of the hysteresis phenomenon of a silicon-based piezoresistive pressure sensor
249
Investigation of the IEEE 802.11 medium access control (MAC) sublayer functions
250
Investigation of the Imbalance Current Compensation for Transformers Used in Electric Railways
251
Investigation of the imbalance difference model and its application to various circuit board and cable geometries
252
Investigation of the impact ionization in the hydrodynamic model
253
Investigation of the impact of Al mole-fraction on the consequences of RF stress on Al
x
Ga
1-x
N/GaN MODFETs
254
Investigation of the impact of compensation for the distance dependent resolution on the uniformity of maximum heart wall counts and wall thickness in cardiac perfusion imaging in SPECT
255
Investigation of the Impact of Compression on the Perceptional Quality of Laparoscopic Videos
256
Investigation of the impact of conductor surface roughness on interconnect frequency-dependent ohmic loss
257
Investigation of the impact of corporate IT outsourcing decision on corporate core competence from the perspective of corporate IT intensity
258
Investigation of the impact of CoWp self-aligned barrier deposition on the porous siOC properties after a direct CMP process
259
Investigation of the impact of DG on the behaviour of NDEDC protection systems
260
Investigation of the impact of electric vehicles on the German market for control reserve
261
Investigation of the impact of embedded VSC-HVDC active and reactive power control on power system stability
262
Investigation of the impact of flexible loads´ participation in electricity markets
263
Investigation of the impact of grain boundary on threshold voltage of 3-D MLC NAND flash memory
264
Investigation of the impact of hop-count and node density on MANET´s performance
265
Investigation of the Impact of Magnetic Permeability and Loss of Magnetic Composite Materials on RFID and RF Passives Miniaturization
266
Investigation of the impact of positive feedback anti-islanding controls on dynamics of motor load
267
Investigation of the Impact of Power Granularity on Chip Thermal Modeling Using White Noise Analysis
268
Investigation of the impact of speed-ripple and inertia on the steady-state current spectrum of a DFIG with unbalanced rotor
269
Investigation of the impact of the oxide thickness and RESET conditions on disturb in HfO
2
-RRAM integrated in a 65nm CMOS technology
270
Investigation of the impact of traffic growth and variability on future network architectures
271
Investigation of the impact of ultra-narrow carrier spacing on the transmission of a 10-carrier 1Tb/s superchannel
272
Investigation of the impact of urban sprawl in three Sahelian cities using remotely-sensed information
273
Investigation of the impacts of energy-saving dispatching on generation companies
274
Investigation of the Impacts of Large-Scale Wind Power Penetration on the Angle and Voltage Stability of Power Systems
275
Investigation of the impacts of three-phase photovoltaic systems on three-phase unbalanced networks
276
Investigation of the impedance variation and radiation loss in portable radios
277
Investigation of the implementation of hospital knowledge management in China
278
Investigation of the importance of the anisotropy of cold-rolled electrical steel sheet
279
Investigation of the impregnation of cellulosic insulations by ester fluids
280
Investigation of the improved method for TDOA estimation with chirp signals
281
Investigation of the improved SDRE control strategy of an AUV based on the optimum of the energy
282
Investigation of the inaccuracy of the MFIE discretized with the RWG basis functions
283
Investigation of the Index Profile of Photonic Crystal Fibers on Dispersion Characteristics
284
Investigation of the influence of addition elements on the oxidation of the Nd/sub 2/Fe/sub 14/B Phase
285
Investigation of the influence of Ag reflective layer on the Correlated Color Temperature and the Angular Color Uniformity of LED with conformal phosphor coating
286
Investigation of the influence of antenna array parameters on adaptive MIMO performance
287
Investigation of the influence of automatic excitation control system on turbine generator oscillatory behavior - part 11
288
Investigation of the influence of boiling point shifting on the breakdown voltage in liquid nitrogen
289
Investigation of the influence of carbon on the magnetic properties of powder injection molded Nd-Fe-B magnet
290
Investigation of the influence of different parameters on maximum electric field intensity in a distribution surge arrester
291
Investigation of the influence of duty cycle on the vanadium oxide thin film thermistor deposited by pulsed dc reactvie magnetron sputtering
292
Investigation of the Influence of DX Centers on HEMT Operation at Room Temperature
293
Investigation of the influence of electric fields on human ventricular myocardium including realistic fiber orientation: a simulation study
294
Investigation of the influence of frequency stability over temperature on the probability collisions in low-speed asynchronous radio system without feedback
295
Investigation of the influence of global stresses and strains on the magnetic properties of electrical steels with varying alloying content and grain size
296
Investigation of the influence of impact ionization feedback on the spatial distribution of hot carriers in an NMOSFET
297
Investigation of the influence of lifted load on dynamical behavior of stacker cranes through unstructured uncertainties
298
Investigation of the influence of light illumination on the characteristics of CdZnTe detectors
299
Investigation Of The Influence Of Measurement Antenna Modelling On The Radiated Spectrum
300
Investigation of the Influence of Non-E/E Safety Measures for the ASIL Determination
301
Investigation of the influence of panoramic roof on mobile telephony antennas
302
Investigation of the influence of periodic disturbances in the layered medium by the method of averaging of Krylov-Bogolyubov
303
Investigation of the influence of process and design on soft error rate in integrated CMOS technologies thanks to Monte Carlo simulation
304
Investigation of the Influence of Reflective Insulation on Indoor Reception in Rural Houses
305
Investigation of the influence of series compensation in AC transmission systems on bus connected parallel generating units with respect to subsynchronous resonance (SSR)
306
Investigation of the influence of several diode parameters on the light-delay time in large-area SH-junction LED´s
307
Investigation of the influence of sintering process on silicon solar cells
308
Investigation of the influence of substrate temperature on the thermal resistance and square stability of amorphous titanium-vanadium oxide films
309
Investigation of the influence of the cell shape and lattice on EBG structures for the effective surface wave suppression
310
Investigation of the Influence of the Film Thickness in Accumulation-Mode Fully-Depleted SIMOX MOSFET´s
311
Investigation of the influence of the well and the barrier thicknesses in GaSb/AlSb/GaSb/AlSb/InAs double-barrier interband tunneling structures
312
Investigation of the Influence of the ZnO varistor preparation method on its characteristics
313
Investigation of the influence of thermal treatment on dielectric properties in PZT-PZN ceramics
314
Investigation of the influence of vanadium dioxide activation on effective heat capacity
315
Investigation of the influence of wind waves on the spectral and angular characteristics of sea surface reverberation from a CW source
316
Investigation of the Influence of Zn-diffusion profile on the electrical properties of InGaAs/InP photodiodes
317
Investigation of the information generated by technology management tools and links to strategic product planning stages
318
Investigation of the infrared characteristics of the rocket nozzle
319
Investigation of the initial stage of electrical explosion of fine metal wires
320
Investigation of the initial stage of exploding wire
321
Investigation of the initial stages of processing Bi-2223 multifilamentary tapes by analytical electron microscopy
322
Investigation of the injection into the ANKA storage ring by a turn by turn BPM system
323
Investigation of the Inrush Phenomenon a Quasi-Stationary Approach in the Harmonic Domain
324
Investigation of the inrush phenomenon: a quasi-stationary approach in the harmonic domain
325
Investigation of the inserted LT-AlGaN interlayer in AlGaN/GaN/AlGaN DH-FET strucutre on Si substrates
326
Investigation of the installation characteristics for ozone obtaining with the direct voltage
327
Investigation of the insulation performance of a new gas mixture with extremely low GWP
328
Investigation of the insulation performance of the insulator covered with Lichen
329
Investigation of the insulator layers for segmented silicon sensors before and after X-ray irradiation
330
Investigation of the intensity noise reduction using a saturated semiconductor optical amplifier in spectrum sliced WDM systems
331
Investigation of the interaction between a supersonic, radiatively cooled, plasma jet with metallic foil and foam targets
332
Investigation of the Interaction of Magnetic Field With the Auxetic Behavior of Galfenol
333
Investigation of the Interaction of Modal and Chromatic Dispersion in VCSEL–MMF Channels
334
Investigation of the interaction of p-benzoquinone and aqueous amino acids in liquid core optical fibers with raman spectroscopy
335
Investigation of the Interaction of Surface Plasmons (SP) with an Electro Optic Polymer and Development of SP Optical Devices
336
Investigation of the interdiffusion of Sb and Bi in [Bi
2
Te
3
]
x
{Sb
2
Te
3
]
y
superlattices
337
Investigation of the Internal Back Reflectance of Rear-Side Dielectric Stacks for c-Si Solar Cells
338
Investigation of the internal noises in the chip with orthogonal topology of power supply feeding
339
Investigation of the internal resistance in LiFePO
4
cells for battery energy storage system
340
Investigation of the inter-stator current control for long primary winding segmented PMLSM used in electromagnetic launch system
341
Investigation of the intrinsic SiO
2
area dependence using TDDB testing
342
Investigation of the Intrinsic Spatial Resolution of an Intensified EMCCD Scintillation Camera
343
Investigation of the inverted state of nuclear magnetic levels in Co
59
films
344
Investigation of the ion concentration effect on Eucalyptus root growth in a.c. electric field
345
Investigation of the Ion Defect States by Photoacoustic Spectroscopy
346
Investigation of the ion spectrum from 1 µm and 10 µm laser produced plasmas for extreme ultraviolet lithography
347
Investigation Of The Ionization Of Helium-cesium Mixture With Turbulent Flow
348
Investigation of the islanding detection of induction generators
349
Investigation of the ISPP dynamics and of the programming efficiency of charge-trap memories
350
Investigation of the junctionless line tunnel field-effect transistor
351
Investigation of the Key Factors Affecting the Permanent Damage of the REBCO Coated Conductor in Overcurrent Condition
352
Investigation of the key sampling parameters of antenna time domain planar near field measurement
353
Investigation of the Knee Injuries for Wushu Athletes
354
Investigation of the land use/land cover change in the Upper Oue´me´ Catchment, Benin (West-Africa) for the set up of a coherent development plan
355
Investigation of the laser properties of Cr
3+
:LiSrGaF
6
356
Investigation of the Laser-Like Effect in Powdered Luminophores
357
Investigation of the lateral turn-on process of thyristors with an epitaxial p-base
358
Investigation of the laws of ionizing radiation effect on the stability of the colloidal solutions of iron
359
Investigation of the leakage inductances and the energy conversion in air-gap transformers
360
Investigation of the Lena river ice cover by GPR from helicopter
361
Investigation of the LIGA process to fabricate microchannel plates
362
Investigation of the limitations of acoustic airway measurement
363
Investigation of the limitations of WDM typical terrestrial transmissions over NZDSF and SMF
364
Investigation of the limits of a fibre optic sensor system for measurement of temperature distribution.
365
Investigation of the liquid-liquid transition in atactic polystyrene by thermally stimulated depolarization current
366
Investigation of the Lithium-ion battery characteristics
367
Investigation of the LO Phase-Noise Effect and RF System Simulation for A 60-GHz Wireless Non-Contact Human Vital-Signal Detection System
368
Investigation of the Load Current Tail Phenomenon on the Qiangguang Generator
369
Investigation of the load-flow problem
370
Investigation of the local force approximation in numerical device simulation by full-band Monte Carlo simulation
371
Investigation of the Local Passive Anti-Islanding Scheme in a Distribution System Embedding a PMSG-Based Wind Farm
372
Investigation of the Local Temperature Increase for Heat Assisted Magnetic Recording (HAMR)
373
Investigation of the locking bandwidth in linear and circular arrays of mutually coupled oscillators, intended for microwave power combining
374
Investigation of the long- and medium-term drift of Zener diode-based voltage standards
375
Investigation of the longitudinal dynamic effects before and after the derailment of a freight train
376
Investigation of the longitudinal multiconductor transmission line functions for symmetric coupled-microstrip systems
377
Investigation of the loss of holding power in the near cortex due to shearing of the bond thread
378
Investigation of the losses in the stator duct spacers of large AC motors using the A-ψ 3-D eddy current formulation
379
Investigation of the Loss-Front Velocity for Magnetically Insulated Ion Flow
380
Investigation of the low field leakage current mechanism in polysilicon TFT´s
381
Investigation of the low voltage multi-beam k-band monotron with the split-cavity resonator
382
Investigation of the lowest-order TE mode of the parallel-plate metal waveguide for terahertz pulses
383
Investigation of the low-field leakage through high-k interpoly dielectric stacks and its impact on nonvolatile memory data retention
384
Investigation of the Low-Loss Dielectric Materials in the Wide Temperature Range
385
Investigation of the Magnesium Silicide -- Mg
2
Si Films
386
Investigation of the magnetic aftereffects in Ti-doped YIG
387
Investigation of the magnetic aftereffects in Ti-doped YIG
388
Investigation of the magnetic field dependence of electronic and optical properties in one-side modulation-doped GaAs-Ga
1-x
Al
x
As quantum wells
389
Investigation of the magnetic field distribution between the vacuum chamber contacts
390
Investigation of the magnetic field intensity near the equipment of the 500 kV power substation
391
Investigation of the magnetic interaction of small Permalloy particles
392
Investigation of the magnetic method of control surface roughness in the details turning
393
Investigation of the Magnetic Properties of ErFe/sub 11/Ti and ErFe/sub 11/TiH in High Magnetic Field
394
Investigation of the magnetization and the twist pitch effect on critical current density in Nb/sub 3/Sn wires of different designs
395
Investigation of the magnetization process of domain walls in an iron-garnet film by direct optical observation of vertical Bloch lines
396
Investigation of the magnetizing inductances of the expanded park equations
397
Investigation of the magneto-mechanical coupling in a magnetoelectric vibration energy converter
398
Investigation of the main correlations between structural and physical propertiess of InAs quantum dots, embedded between strain-relief GaAsSb layers
399
Investigation of the Martian thermal parameters with radiowave active-passive approach
400
Investigation of the maximum distance reach for the mixed-WDM systems with unequal frequency grid
401
Investigation of the maximum optical power rating for a micro-electro-mechanical device
402
Investigation of the Measure and Control Method for Vibration of the Variable-Frequency Precisely Cropping Machine
403
Investigation of the mechanical constraints on the design of a super-high-speed Switched Reluctance Motor for automotive traction
404
Investigation of the Mechanical Faults Classification Using Support Vector Machine Approach
405
Investigation of the mechanical load-influence on volume resistance of filled polymers
406
Investigation of the Mechanism of Alternative Promoters Influencing Alternative Splicing
407
Investigation of the mechanism of ARFI-based Color Doppler feedback of histotripsy tissue fractionation
408
Investigation of the mechanism of contact guidance of neurite growth cones in magnetically-aligned collagen gels
409
Investigation of the mechanism of electron current suppression in an ion diode with magnetic self - insulation
410
Investigation of the mechanism of improvement in improved nyquist filters
411
Investigation of the mechanism of inactivation of E. coli in water using a pulsed spark plasma discharge
412
Investigation of the Mechanism of Stuck Bits in High Capacity SDRAMs
413
Investigation of the Mechanism of Terahertz Radiation from InAs under Magnetic Fields
414
Investigation of the Mechanism Resulting in low Resistance Ag Thick-Film Contact to Si Solar Cells in the Context of Emitter Doping Density and Contact Firing for Current-Generation Ag Paste
415
Investigation of the mechanisms leading to the electrical breakdown of a triggered water gaps
416
Investigation of the Mechanisms of Electromagnetic Field Interaction with Proteins
417
Investigation of the mechanisms underlying cardiac alternans - insights from a computational study
418
Investigation of the MeshFree RPIM Solution for a Haptic Sensing Approach to MEMS Design
419
Investigation of the mesoscopic contact mechanics of sexithienyl thin films
420
Investigation of the metal tube floater flowmeter based on the LMBR algorithm of neural network
421
Investigation of the meteorites porosity by X-ray tomography and 3D image processing
422
Investigation of the methods of improving group delay characteristic using complex transmission zeros for coupled resonators filter
423
Investigation of the MHz switching frequency PFC converter based on high-voltage GaN HEMT
424
Investigation of the microbending sensitivity of fibers
425
Investigation of the microcantilevers by the photoacoustic elastic bending method
426
Investigation Of The Microscopic Parameters Governing The Photorefractive Effect In KTa/sub 1-x/Nb/sub x/O/sub 3/: Cu, V
427
Investigation of the microstructure of Cu(In,Ga)Se
2
thin films used in high-efficiency devices
428
Investigation of the Microstructure, Porosity, Adhesion, and Optical Properties of a WO
3
Film Fabricated Using an E-Beam System With Ion Beam-Assisted Deposition
429
Investigation of the microwave electromagnetic field attenuation effect in the discharge chamber of a resonant type plasmatron
430
Investigation of the minimum detectable activity level of a preclinical LSO PET scanner
431
Investigation of the mirror temperature of narrowstripe GaAs/AlGaAs quantum well lasers with segmented contacts
432
Investigation of the mobile terminal optimum operating point in UMTS-FDD initial cell search procedure
433
Investigation of the Mobius accelerator at CESR
434
Investigation of the moisture impact on the stacked die package
435
Investigation of the morphology and elemental composition of the silicon-containing calcium phosphate coating treated by intensive pulsed electron beam
436
Investigation of the morphology in AlN filled epoxy based composite materials
437
Investigation of the most suitable location finding techniques for GSM1800 network
438
Investigation of the moving striation in a low pressure mercury discharge
439
Investigation of the multifilamentary (Nb,Ti)/sub 3/Sn conductors with CuNb reinforced stabilizer
440
Investigation of the multilayer deposited BiSrCaCuO thin films
441
Investigation of the mutual coupling between apertures on doubly curved convex surfaces: theory and measurements
442
Investigation of the mutual effect between power link and data link for biomedicai applications
443
Investigation of the Near Field Coupling Effects on Common-Mode EMI in Power Converter
444
Investigation of the Near-Carrier Noise for Strain-Driven ME Laminates by Using Cross-Correlation Techniques
445
Investigation of the near-field interaction of the open-ended of the coaxial waveguide
446
Investigation of the networking performance of remote real-time computing farms for ATLAS trigger DAQ
447
Investigation of the Networking Performance of Remote Real-Time Computing Farms for ATLAS Trigger DAQ
448
Investigation of the neural network dynamics by means of the evoked potential as the dependence from the wide-spread different shape light signal and the specific neural features
449
Investigation of the neutral-solution etch process for refractive SOE antireflective surfaces
450
Investigation of the new guest-host DR13/PEK-c poled polymer
451
Investigation of the new prediction method for Ht values during the plasma exchange
452
Investigation of the newly proposed carrier-envelope-phase stable attosecond pulse source
453
Investigation of the nighttime D-region ionosphere characteristics at Palmer Station antartica by using tweek atmospherics
454
Investigation of the Noise Performance of Double-Gate MOSFETs by Deterministic Simulation of the Boltzmann Equation
455
Investigation of the Noise Variance and the SNR Estimators for OFDM Systems with Imperfect Frequency Synchronization
456
Investigation of the nonlinear behavior of a weakly-ionized plasma
457
Investigation of the nonlinear circuit analysis by electromagnetic topology based on harmonic balance
458
Investigation of the Nonlinear Electromagnetic Energy Harvesters From Hand Shaking
459
Investigation of the nonlinear optical properties of quantum confined InP deposited in porous glass
460
Investigation of the nonlinear optical response in polymeric azoester systems
461
Investigation of the nonlinear stage of driftr flute turbulence in a high bet a plasma in the presence of temperature gradient effects
462
Investigation of the nonlinearity in few mode fibers
463
Investigation of the Nonthermal Mechanism of Efficiency Rolloff in InGaN Light-Emitting Diodes
464
Investigation of the north-east monsoon characteristics in the region of South East Asia using ERS wind scatterometer data
465
Investigation of the novel attributes of a fully depleted dual-material gate SOI MOSFET
466
Investigation of the Novel Attributes of a Vertical MOSFET with Internal Block Layer (bVMOS): 2-D Simulation Study
467
Investigation of the numerical accuracy of transmission line-based transient analysis of high-speed interconnects and cables
468
Investigation of the occurrence of: no-faults-found in electronic equipment
469
Investigation of the ocean backscatter during high wind events. I. Experiment description and results
470
Investigation of the ocean backscatter during high wind events. II. Analyses and revised high wind backscatter models
471
Investigation of the offset charge noise in single electron tunneling devices
472
Investigation of the offset charge noise in single electron tunneling devices
473
Investigation of the off-State Behavior in Deep-Submicrometer NMOSFETs Under Heavy-Ion Irradiation by 3-D Simulation
474
Investigation of the on-orbit conjunction between the MCubed and HRBE CubeSats
475
Investigation of the onset voltage for the design of a microfabricated colloid thruster
476
Investigation of the operating characteristics of the 3.5 µ xenon laser
477
Investigation Of The Operating Modes Of Gated Vacuum Field Emitter Arrays To Reduce The Failure Rate
478
Investigation of the operating strategies of remotely connected embedded generators to help regulating local network voltage
479
Investigation of the operation of adaptive loop resonator under different magnitude of the optical phase distortions of the intracavity beams
480
Investigation of the operational behaviour of a wind energy conversion system including double fed induction generator in converter´s faulty conditions
481
Investigation of the optical and electrical characteristics of a spark gap
482
Investigation of the optical and electrical characteristics of a spark gap
483
Investigation of the optical and structural characteristics of Ge self-assembled quantum dots grown directly on Si substrates and on strain relaxed Si
0.9
Ge
0.1
buffer layers
484
Investigation of the optical behaviour of GaAs lasers operated with pulse and sinusoidal modulation
485
Investigation of the optical homogeneity of nonlinear crystals by a new single shot method
486
Investigation of the optical losses in photonic crystal laser cavities by varying the number of lattice periods
487
Investigation of the Optical Properties of Human Meridian by Reflectance Measurement
488
Investigation of the optical properties of PLD-grown Bi
2
Te
3
and Sb
2
Te
3
489
Investigation of the optical properties of ZnO/epoxy resin nanocomposite: Application in the LED
490
Investigation of the optics system carbonaceous contamination induced by chemically amplified resist outgassing under e-beam radiation
491
Investigation of the optimal heat flux density for the refrigerated warehouses design
492
Investigation of the optimal method for improvement of the protective characteristics of gas-filled surge arresters-with/without the built-in radioactive sources
493
Investigation of the optimization progress of the subspace based optimization method in reconstructing perfect electric conductors
494
Investigation of the optimum alternate-phase RZ modulation format and its effectiveness in the suppression of intrachannel nonlinear distortion in 40-Gbit/s transmission over standard single-mode fiber
495
Investigation of the Optimum Electric Field for a Stable Electrospinning Process
496
Investigation of the Optimum Electric Field for a Stable Electrospinning Process
497
Investigation of the Origin of
Modulation by
498
Investigation of the origin of InAs dot formation at the growth interrupted AlGaInAs hetero-interface grown by MOVPE
499
Investigation of the origin of load-controlled vibration of large power transformers by coupled 3D-FEM analysis
500
Investigation of the output current and its applications for the multiphase buck converter
501
Investigation of the output droop characteristics of parallel-connnected DC-DC converters
502
Investigation of the Over Current Characteristics of HTS Tapes Considering the Application for HTS Power Devices
503
Investigation of the Overvoltage and Fast Transient Phenomena on Transformer Terminals by Taking Into Account the Grounding Effects
504
Investigation of the oxidation process at the copper-solder interface with atomic force microscopy
505
Investigation of the oxide coating formation process with quasi-periodical pores arrangement
506
Investigation of the oxygen-vacancy (A-center) defect complex profile in neutron irradiated high resistivity silicon junction particle detectors
507
Investigation of the Packaging-Induced RF Attenuations and Resonances in a Broadband Optoelectronic Modulator Module
508
Investigation of the Pade approximant-based wide-angle beam propagation method for accurate modeling of waveguiding circuits
509
Investigation of the palladium distribution in the intermetallic phase region of Au-Al wire bond interconnects
510
Investigation of the parasitic coupling effects in densely packaged RSFQ digital circuits
511
Investigation of the parasitic loop counterpoise antenna
512
Investigation of the PbMoO4 electronic structure formation using the software package “SCPPBAND”
513
Investigation of the Performance Limits of III-V Double-Gate n-MOSFETs
514
Investigation of the performance limits of III-V double-gate n-MOSFETs
515
Investigation of the performance of a 25 Gb/s OFDM-PON employing a semiconductor optical amplifier
516
Investigation of the performance of a controlled router for the CEBus [home automation]
517
Investigation of the performance of a multimode, multiband receiver for OFDM and cellular systems
518
Investigation of the performance of a nove permanent magnet biased fault current limiter
519
Investigation of the performance of a photovoltaic AC module
520
Investigation of the performance of a vector-controlled delta-inverter fed BACM drive
521
Investigation of the Performance of an EBG Waveguide-based Interconnect Used as a High-speed Serial Link
522
Investigation of the performance of an electrothermal plasma source with extended pulse length
523
Investigation of the performance of antennas for interference detection in aircraft
524
Investigation of the performance of Ce
3+
doped single crystal scintillators covering radiotherapy and PET/CT imaging conditions
525
Investigation of the performance of CF
3
I Gas as a Possible Substitute for SF
6
526
Investigation of the performance of copolarized, colocated electric and magnetic dipoles for increasing channel capacity
527
Investigation of the Performance of Fe-Based Catalysts for NOx Reduction with NH3
528
Investigation of the performance of field aged HMWPE and XLPE cables
529
Investigation of the performance of GAFT, a novel network anomaly fault detection system
530
Investigation of the Performance of Multiband Orthogonal Frequency Division Multiplexing Ultrawideband Over Fiber Transmission Under the Presence of In-Band Interferers
531
Investigation of the performance of new XLPE and EPR cables
532
Investigation of the Performance of Scintillator-Based CMOS Flat Panel Detectors for X-Ray and Thermal Neutron Imaging
533
Investigation of the performance of SISFCL with the variation of hysteretic characteristics
534
Investigation of the performance of strained-SiGe vertical IMOS-transistors
535
Investigation of the performance of the General Electric Advance positron emission tomograph in 3D mode
536
Investigation of the performance of the General Electric ADVANCE positron emission tomograph in 3D mode
537
Investigation of the performance of variable-density Z-spectrum acquisition scheme in MR chemical exchange saturation transfer effect quantification
538
Investigation of the performances of a permanent magnet biased fault current limiting reactor with a steel core
539
Investigation of the periodic magnetic field modulation in LHC superconducting dipoles
540
Investigation of the periphery sensing problems in mobile robot systems
541
Investigation of the permeability tensor of electrical steel sheet
542
Investigation of the pessimism in distributed systems timing analysis
543
Investigation of the phorbol ester content in high quality biodiesel production process
544
Investigation of the photoelectrochemical effect in optoelectrodes and potential uses for implantable electrode characterization*
545
Investigation of the Photoresist Pattern Profile Contrast Improvement in Interference Lithography Technique Using 488-nm Laser
546
Investigation of the physical aspects of beta imaging probes using scintillating fibers and visible light photon counters
547
Investigation of the physical aspects of beta imaging probes using scintillating fibers and visible light photon counters
548
Investigation of the physical mechanisms governing data-retention in down to 10nm nano-trench Al
2
O
3
/CuTeGe conductive bridge RAM (CBRAM)
549
Investigation of the physical mechanisms governing the performance of OEIC-compatible p-i-n active region lateral injection lasers
550
Investigation of the physical modeling of the gate-depletion effect
551
Investigation of the Physical Properties in Rotating Gliding Arc Discharge With Rapeseed Oil
552
Investigation of the physical properties of elastic syntactic foams
553
Investigation of the Piezoelectric Effect as a Means to Generate X-Rays
554
Investigation of the piezoelectric properties of semiconducting nanostructures
555
Investigation of the Piezoelectric Properties of the Thin Films by AFM
556
Investigation of the piezoelectric thrust test stand for rocket engine
557
Investigation of the PL CEBUS performance with and without acknowledgment
558
Investigation of the plane wave behavior within bianisotropic media
559
Investigation of the plasma bullets generated by low temperature plasma jets
560
Investigation of the plasma edge cathode
561
Investigation of the plasma inhomogeneities in a plasma opening switch by laser methods
562
Investigation of the polarization dependence of the optical transmission in subwavelength metal hole array
563
Investigation of the polarization depth distribution of PZT thick films by LIMM
564
Investigation of the polarization effect in lithium iron phosphate battery for electric vehicles
565
Investigation of the polarization properties of satellite channels with multiple antennas
566
Investigation of the polymer wick structure applied to loop heat pipe
567
Investigation of the polymer wick structure applied to loop heat pipe
568
Investigation of the polynomial models in the definition of short and open calibration standards
569
Investigation of the popcorn phenomenon in overmolded plastic pad array carriers
570
Investigation of the Positive Column of High-Current Metal-Vapor Arcs
571
Investigation of the possibilities of using abbreviated methodology for determining separation distances for external lightning protection system
572
Investigation of the possibility of energy saving in dc motor drive systems in the hellenic territory: Methodology & early results
573
Investigation of the potential for electric vehicles to support the domestic peak load
574
Investigation of the potentialities of Vertical Resistive RAM (VRRAM) for neuromorphic applications
575
Investigation of the power limiting factors for a Q-switched 2.0 /spl mu/m Tm:YAG laser
576
Investigation of the power losses in a laminated dipole magnet with superconducting coils
577
Investigation of the power scenario in India for the implementation of smart grid
578
Investigation of the power supply´s turn-on and turn-off dynamics
579
Investigation of the precision regarding fiber fault location with a commercial Optical Time Domain Reflectometer
580
Investigation of the predictability of neural cell survival after exposure to non-uniform electric fields
581
Investigation of the pre-heating process during thermosonic wire bonding by FEM simulation
582
Investigation of the presence of mixed valence states in uranium-doped crystals
583
Investigation of the pressure rise during the quench of a force cooled superconducting coil
584
Investigation of the printed dual-band quasi-Yagi monopole antenna matching
585
Investigation of the pro-arrhythmic effects of domperidone by a simulation study
586
Investigation of the process for glass interposer
587
Investigation of the process of latex agglutination based on the analysis of light transmission fluctuations
588
Investigation of the process of localization of disturbances in unlinear equations
589
Investigation of the process of microwave iron-production with the integrated microscopic imaging spectrometer
590
Investigation of the production properties of fancy yarns using image processing method
591
Investigation of the programming accuracy of a double-verify ISPP algorithm for nanoscale NAND Flash memories
592
Investigation of the projection iterative method in solving the MoM matrix equations in electromagnetic scattering
593
Investigation of the propagation effects on terrestrial microwave links in Lebanon
594
Investigation of the Propagation Induced Pulse Broadening (PIPB) Effect on Single Event Transients in SOI and Bulk Inverter Chains
595
Investigation of the propagation of harmonic distortion from traction converters into traction and transmission systems
596
Investigation of the propagation stability of a doubly spread underwater acoustic channel
597
Investigation of the Properties of
${\hbox {3}}^{\prime\prime}\times {\hbox {3}}^{\prime\prime}$
Different Scintillation Detectors for Neutron Activation Analysis Techniques
598
Investigation of the properties of amorphous silicon flat-panel detectors suitable for real-time neutron imaging
599
Investigation of the properties of new scintillator LYSO and recent LSO scintillators for phoswich PET detectors
600
Investigation of the properties of PbMo
6
S
8
powder processed wires
601
Investigation of the Properties of the HEAF Estimator Using Simulation Experiments and MPEG-encoded Video Traces
602
Investigation of the pseudospark produced intense electron beam
603
Investigation of the p-type behavior in Cu
2
O: An ab initio study
604
Investigation of the pulse load behavior of power wire-wound resistors
605
Investigation of the quantitative capabilities of a positron emission mammography system
606
Investigation of the quantum particle swarm optimization technique for electromagnetic applications
607
Investigation of the radial uniformity of planar inductively coupled RF discharges using a self-consistent two-dimensional kinetic model
608
Investigation of the radiation dose in computed micro tomography using the Medipix3 semiconductor detector in combination with an iterative reconstruction algorithm
609
Investigation of the radiation effects upon the stability of fusion magnet coils
610
Investigation of the radiation from finite-size one-dimensional leaky-wave antennas
611
Investigation of the Radiation Resistivity of Large Scale Integrated CMOS-RAM´s
612
Investigation of the radiation tolerance of all-P-type termination structures for silicon detectors
613
Investigation Of The Radiation Tolerance Of Amorphous Silicon Photodiodes For Radiotherapy Imaging
614
Investigation of the radioactivity inside the KSTAR vacuum vessel after shutdown by using gamma-ray spectrometry
615
Investigation of the random dopant fluctuations in 20-nm bulk mosfets and silicon-on-Insulator FinFETs by Ion implantation Monte Carlo simulation
616
Investigation of the random forest framework for classification of hyperspectral data
617
Investigation of the Rao-Blackwellized particle filter for two jump-Markov inertia measurement models
618
Investigation of the ratio between phase and Group birefringence in optical single-mode fibers
619
Investigation of the realization of a breast-cancer detection system
620
Investigation of the rear support interference on the aerodynamic characteristics of the RRJ-95 model in the T-128 transonic wind tunnel
621
Investigation of the reflection and transmission of nano-scale gold films
622
Investigation of the reflow behavior of GeO/sub 2/-SiO/sub 2/ glasses deposited by plasma enhanced chemical vapor deposition
623
Investigation of the relation between acoustic features and articulation — An application to emotional speech analysis
624
Investigation of the relation between amount of VoIP speech data and performance in speaker identification task over VoIP networks
625
Investigation of the relation between flame volume and LBO limits for a swirl-stabilized combustor
626
Investigation of the Relation Between Interaction and Sense of Presence in Educational Virtual Environments
627
Investigation of the relationship between ill-conditioned power flow and voltage collapse
628
Investigation of the Relationship between Load and Loss Factors for a Brazilian Electric Utility
629
Investigation of the relationship between PD measured with RF techniques and apparent charge quantity of metal protrusion in air
630
Investigation of the relationship between sensitivity and stored energy
631
Investigation of the relationship between sphingolipid and insulin signaling pathways
632
Investigation of the relationship between visual information and interaction force on load-on task within virtual environment
633
Investigation Of The Relationship Of Sar Hh And Vv Backscatter To Surface Roughness And Dielectric Constant
634
Investigation of the relative impulse strength of magnet wires
635
Investigation Of The Relative Merits Between DAS And ORSAT For Small Satellite Reentry Analysis
636
Investigation of the Relative Radiometric Normalization in Remote Sensing Image Change Detection
637
Investigation of the relative sensitivity of control of impulse X-ray television systems
638
Investigation of the Relaxation of Persistent Current in Superconducting Closed Loops Made Out of YBCO Coated Conductors
639
Investigation of the Reliability Behavior of Conductive-Bridging Memory Cells
640
Investigation of the reliability degradation of scaled SONOS memory transistors
641
Investigation of the Reliability of Copper Ball Bonds to Aluminum Electrodes
642
Investigation of the reliability of Cu and Co UBM layers in thermal-cycling tests
643
Investigation of the reliability of Unibond and SIMOX N-MOSFETs using charge pumping and noise techniques
644
Investigation of the removal of nonradioactive corrosion product films using a low-pressure arc
645
Investigation of the residue in an electric rail gun employing a plasma armature
646
Investigation of the resistive switching behavior in Ni/HfO
2
-based RRAM devices
647
Investigation of the resonance behavior of a MR-birdcage applying a 3-D-FEM code
648
Investigation of the resonance characteristics of the carcase
649
Investigation Of The Resonant Behaviour Of The Somatic Cortex Via Single-trial Analysis Of The Evoked Magneto-encephalogram
650
Investigation of the resonant properties of wires as a base for complex materials construction
651
Investigation of the RESURF Dielectric Inserted (REDI) LDMOS as a novel silicon-based RF power device
652
Investigation of the reverse biasing of solar cells in a space array
653
Investigation of the reverse power flow requirements of high penetrations of small-scale embedded generation
654
Investigation of the risk to software reliability and maintainability of requirements changes
655
Investigation of the robustness of a non-uniform filterbank for cognitive load classification
656
Investigation of the Robustness of the Swedish Network Performance Assessment Model
657
Investigation of the Rod Pinch Diode on PIM as a Radiographic Source
658
Investigation of the role of a-Si:H based-alloy solar cell thickness on 1.00 MeV proton irradiation resistance
659
Investigation of the role of crimps in collagen fibers in tendon with a microstructually based finite element model
660
Investigation of the role of electrodes on the retention performance of HfO
x
based RRAM cells by experiments, atomistic simulations and device physical modeling
661
Investigation of the Role of Feature Selection and Weighted Voting in Random Forests for 3-D Volumetric Segmentation
662
Investigation of the Role of H in Fabrication-Process- Induced Variations of
Josephson Junctions
663
Investigation of the role of H-related defects in Al
2
O
3
blocking layer on charge-trap memory retention by atomistic simulations and device physical modelling
664
Investigation of the role of Ni in forming ultra-low resistance Ni-Ge-Au ohmic contacts to n
+
GaAs
665
Investigation of the Role of Silver Nanoparticles in BSA Protein Misfolding Process
666
Investigation of the role of spot pattern information in two-dimensional gel electrophoresis image registration
667
Investigation of the Role of Void Formation at the Cu-to-Intermetallic Interface on Aged Drop Test Performance
668
Investigation of the role of X-ray photons in the pre-breakdown current in vacuum interrupter gaps
669
Investigation of the roles of the additive components for second generation copper electroplating chemistries used for advanced interconnect metalization
670
Investigation of the rotating arc plasma generated in a vacuum circuit breaker
671
Investigation of the rotating arc plasma generated in transverse magnetic field (TMF) contacts of vacuum interrupter
672
Investigation of the Rotor Demagnetization Characteristics of Interior PM Synchronous Machines During Fault Conditions
673
Investigation of the rotor demagnetization characteristics of interior PM synchronous machines during fault conditions
674
Investigation of the rotor mechanical stresses of various interior permanent magnet motors
675
Investigation of the routing algorithm in a De Bruijn-based NoC for low-power applications
676
Investigation of the routing method based on the number of neighbor nodes
677
Investigation of the RTN Distribution of Nanoscale MOS Devices From Subthreshold to On-State
678
Investigation of the sapphire-silicon interface by transient current analysis
679
Investigation of the saturation properties of gyroamplifiers
680
Investigation of the scalability of ultra thin body (UTB) double gate tunnel FET using physics based 2D analytical model
681
Investigation of the scaling rules determining the performance of film bulk acoustic resonators operating as mass sensors
682
Investigation of the scatter contribution in single photon transmission measurements by means of Monte Carlo simulations
683
Investigation of the scatter contribution in single photon transmission measurements by means of Monte Carlo simulations
684
Investigation of the Scattering Efficiency in Doppler Reflectometry by Two-Dimensional Full-Wave Simulations
685
Investigation of the scattering intensity parameters and the hue-saturation based color space models used in the Cloude-Pottier decomposition method
686
Investigation of the scattering of laser light by a plasma
687
Investigation of the scattering properties of Yb:Y
2
O
3
and its effect on laser parameters
688
Investigation of the seasonal variation of ground thermal conductivity on high voltage cable ampacity
689
Investigation of the secondary arc current and the recovery voltage on a double-circuit transmission lines
690
Investigation of the second-harmonic light emission by KTiOPO
4
nanometric-sized crystals as an in situ nonlinear nanosource
691
Investigation of the segment order in step-skewed synchronous machines on noise and vibration
692
Investigation of the Selenium Rectifier for Contact Protection
693
Investigation of the self activity and high energy γ-rays response of a 1” × 1” and 3” × 3” LaBr
3
:Ce scintillators
694
Investigation of the Self Magnetic Pinch Diode on PIM as a Radiographic Source
695
Investigation of the self-heating effect on hot-carrier characteristics for packaged high voltage devices
696
Investigation of the self-injection locked behaviour of a continuous wave Nd:YAG ring laser
697
Investigation of the self-similar structure of the hybrid coating surface Al
2
O
3
/TiN
698
Investigation of the sensitivity enhancement of nanowire-based surface plasmon resonance biosensors
699
Investigation of the sensitivity, selectivity, and reversibility of the chemically-sensitive field-effect transistor (CHEMFET) to detect NO
2
, C
3
H
9
PO
3
, and BF
3
700
Investigation of the Series Inductance Value of Step-Up Transformers for HID Lamps Igniters
701
Investigation of the sheath effect on the resonance frequencies of a curling probe
702
Investigation of the shielding on the mobile phone PCB using FDTD
703
Investigation of the short-circuit current behavior of wind generators
704
Investigation of the short-circuit performance of an IGBT
705
Investigation of the Shubnikov-de Haas effect in semiconductors by optical and microwave methods
706
Investigation of the signal resolution of a high-T/sub c/ balanced comparator
707
Investigation of the Silicon Substrate With Different Substrate Resistivities for Integrated Filters With Excellent Performance
708
Investigation of the single equivalent model of double step-index waveguide in TE mode
709
Investigation of the single-electron transistors based on aluminum and its oxides
710
Investigation of the Singlet Oxygen Generator with the Twisted Flow
711
Investigation of the SINR behavior of the beamforming-applied cellular CDMA base station receiver
712
Investigation of the SISAR imaging of the ground moving target under multipath interference
713
Investigation of the Site Occupation of Atoms in Pure and Doped TiA1/Ti3Al Intermetallic
714
Investigation of the size and spatial distribution of fillers in mold compounds after device packaging
715
Investigation of the Slow-Wave Properties of a Dielectric-Lined Azimuthally Periodic Circular Waveguide for TWT
716
Investigation of the small pixel effect in CdZnTe detectors
717
Investigation of the SOA fast-dynamics for 160 Gbit/s applications
718
Investigation of the soft-write mechanism in source-side injection flash EEPROM devices
719
Investigation of the solder joint fatigue life in combined vibration and thermal cycling tests
720
Investigation of the solid-phase epitaxial growth of amorphized GaAs with in-situ and ex-situ electron microscopy
721
Investigation of the solutions of the modified Zakharov-Kuznetsov equation
722
Investigation of the solutions of the nonlinear antenna synthesis problems
723
Investigation of the sound absorption of piezoelectric composite absorber submerged in water
724
Investigation of the source space of electrocardiography and magnetocardiography using isotropic and anisotropic thorax models
725
Investigation of the source/drain asymmetric effects due to gate misalignment in planar double-gate MOSFETs
726
Investigation of the space charge effect in the quantum well infrared photodetector
727
Investigation of the sparse antenna array properties in the radio-imaging systems
728
Investigation of the sparse MoM reaction matrices produced in stripline packaging problems
729
Investigation of the spatial and spectral patterns of hand extension/flexion using high-density ECoG
730
Investigation of the spatial spectrum of cortical contours on cross-sections of the brain
731
Investigation of the spatial structure of myomodulin H molecule by computer modeling
732
Investigation of the spatio-temporal array manifold of linear arrays using differential geometry
733
Investigation of the spectral advantages of sol-gel layered erbium doped waveguide amplifiers
734
Investigation of the spectral and energy characteristics of bunches of space charge in turbulent electron beams
735
Investigation of the spectral envelope estimation vocoder and improved pitch estimation based on the sinusoidal speech model
736
Investigation of the spectral purity of an injection-seeded pulsed optical parametric oscillator system and its use for differential absorption lidar measurements in the atmosphere
737
Investigation of the spectrogram technique for the characterization of picosecond optical pulses
738
Investigation of the S-PIN Diodes for Silicon Monolithic Antennas With Reconfigurable Aperture
739
Investigation of the Spindt type cathode formation mechanism by simulation and experiments
740
Investigation of the stability and biocompatibility of commonly used electrode materials in organic neuro-optoelectronics
741
Investigation of the Stability Behavior of Coated Conductors
742
Investigation of the stability of a tapered gyro-TWT amplifier
743
Investigation of the stability of AC repulsive-force levitation systems for low-speed maglev
744
Investigation of the stability of AC repulsive-force levitation systems for low-speed Magley
745
Investigation of the Stability of ADE-FDTD Methods for Modified Lorentz Media
746
Investigation of the Stability of Cu/NbTi Multifilament Composite Wires
747
Investigation of the stability of linear feedback amplifiers by means of open-loop scattering-matrix measurements
748
Investigation of the stability of microwave oscillations in an optically injected 1550nm-VCSEL
749
Investigation of the stability of power system governed by Duffing´s equation
750
Investigation of the stabilization method for DC microgrid based on the loop counteraction technique
751
Investigation of the Stanley Alternate Current Arc Dynamo
752
Investigation of the state feedback control strategy based on hybrid magnetic levitation for TR train
753
Investigation of the stationarity of the modulation transfer function and the scatter fraction in conjugate view SPECT restoration filtering
754
Investigation of the Statistical and Formative Time Lags Associated with the Breakdown of a Gas in a Gap at High Overvoltage
755
Investigation of the statistical parameters of the LFSR quasi-random generator
756
Investigation of the statistical properties of solar radio burst type II and III
757
Investigation of the Statistical Variability of Static Noise Margins of SRAM Cells Using the Statistical Impedance Field Method
758
Investigation of the steady-state and dynamic characteristics of a buck converter with nonlinear output capacitor current programming
759
Investigation of the stone cutting conditions with the electrical pulse discharges of low energy
760
Investigation of the stop region of a compressed log-periodic dipole antenna
761
Investigation of the Storage Battery Station for Effective Utilization of Electric Power Generated by PV Clusters
762
Investigation of the strain-affected ultrafast spin switching on cobalt-doped carbon fullerenes
763
Investigation of the Strained PMOS on (110) Substrate
764
Investigation of the strategy of wind farm power regulation considering system frequency regulation demand
765
Investigation of the stress-strain curves of lead-free solder alloy
766
Investigation of the stretched exponentials method for an application in fluorescence lifetime imaging ophthalmoscopy (FLIO)
767
Investigation of the structural and electrical characterization on ZrO
2
addition for ALD HfO
2
with La
2
O
3
capping layer integrated metal-oxide semiconductor capacitors
768
Investigation of the structural and functional relationships of oncogene proteins
769
Investigation of the structural changes in LDPE and XLPE induced by high electrical stress
770
Investigation of the structure of data network of biotronics systems
771
Investigation of the structure of recording head fields
772
Investigation of the subjective force perception based on the estimation of the muscle activities during a steering operation
773
Investigation of the sub-micro displacement servo system as sensor apparatus
774
Investigation of the Subthreshold Swing in Vertical Tunnel-FETs Using
and
775
Investigation of the Suitability of 1200-V Normally-Off Recessed-Implanted-Gate SiC VJFETs for Efficient Power-Switching Applications
776
Investigation of the suitability of commercially available bio-oils as insulating liquid
777
Investigation of the Suitability of IrBurst for High-Speed Exchange of Large Data Blocks
778
Investigation of the suitability of spike anneal for advanced CMOS technology
779
Investigation of the supercapacitor mathematical model by means of LTspice IV
780
Investigation of the Suppression of the Narrow Channel Effect in Deep Sub-Micron EXTIGATE Transistors
781
Investigation of the Surface Adhesion Phenomena and Mechanism of Gold-Plated Contacts at Superlow Making/Breaking Speed
782
Investigation of the surface horizontally shear waves in a functionally graded magneto-electro-elastic plate
783
Investigation of the Surface Ionization Effect on Planar Silicon Bipolar Transistors and the Improvement of the Resistance to Radiation by an Irradiation-Annealing Treatment
784
Investigation of the surface morphology of P-doped LPCVD silicon films
785
Investigation of the Surface Passivation of P+-Type Si Emitters by PECVD Silicon Carbide Films
786
Investigation of the surface passivation quality of various novel low temperature rear localized contacting schemes for photovoltaic devices
787
Investigation of the Surface Resistance of a Niobium-Cavity at S-Band
788
Investigation of the surface resistance of superconducting niobium using thermometry in superfluid helium
789
Investigation of the surface resistivity tolerance of the kicker ceramic vacuum chamber at APS
790
Investigation of the surge characteristics of power rectifiers and thyristors in large area press packages
791
Investigation of the surge characteristics of power rectifiers and thyristors in large-area press packages
792
Investigation of the switching behavior of p-i-n diodes using electric analog models
793
Investigation of the switching behavior of pin-diodes using electronic analog models
794
Investigation of the switching frequency harmonics impact on PWM induction motor drive efficiency
795
Investigation of the sympathetic tripping problem in power systems with large penetrations of distributed generation
796
Investigation of the Synthetic Aperture Focusing Technique resolution for heavy rotor forging ultrasonic inspection
797
Investigation of the system with coupled open cylindrical resonators in the millimeter wave-band
798
Investigation of the Tail of a Fe Plasma Plume Passing Through Solenoidal Magnetic Field for a Laser Ion Source
799
Investigation of the target strength-to-length relationship of Baltic herring (Clupea harengus) for use in biomass estimation
800
Investigation of the TCP simultaneous-send problem in 802.11 wireless local area networks
801
Investigation of the technical-economic contribution of renewable energy and energy efficiency: Lebanese context
802
Investigation of the techniques deployed in spectrum slicing for microwave photonic filters
803
Investigation of the Technology Integration among Mathematics Teachers in a Key Senior High School
804
Investigation of the Temperature Character of IGBT Solder Delamination Based the 3-D Thermal-Electro Coupling FEM
805
Investigation of the temperature coefficient of electrical resistance and 1/f noise of laser-annealed amorphous silicon layers
806
Investigation of the temperature dependence of the threshold current density of GaInP/AlGaInP double heterostructure lasers
807
Investigation of the Temperature Dependence of Threshold Current Density of GaInP/AlGaInP Multi Quantum Well Lasers
808
Investigation of the temperature dynamics process in the nonlinear optical materials by using PO Z-scan technique
809
Investigation of the Temporal Evolution of X-Ray Emission From a Copper Vacuum Spark Plasma
810
Investigation of the terahertz vibrational modes of ZIF-8 and ZIF-90 with terahertz time-domain spectroscopy
811
Investigation of the textile structures with different design used in electromagnetic shielding
812
Investigation of the theoretical basis for using a 1 GHz TEM cell to evaluate the radiated emissions from integrated circuits
813
Investigation of the thermal behavior of a RTP furnace
814
Investigation of the thermal behaviour of thin crystalline silicon solar cells
815
Investigation of the thermal drift of open-loop Hall Effect current sensor and its improvement
816
Investigation of the thermal head effect in a power transformer
817
Investigation of the Thermal Noise of MOS Transistors under Analog and RF Operating Conditions
818
Investigation of the thermal performance of high-concentration photovoltaic solar cell package
819
Investigation of the thermal performance of micro-whisker structured silicon heatspreaders for power devices
820
Investigation of the thermal remagnetization in sintered hard magnets
821
Investigation of the thermal runaway of silicon carbide diodes during blocking operation
822
Investigation of the thermal stability of reactively sputter-deposited TiN MOS gate electrodes
823
Investigation of the thermal stress field in a multilevel aluminium metallization in VLSI systems using finite element modelling approach
824
Investigation of the thermal transfer coefficient by the energy balance of fault arcs in electrical installations
825
Investigation of the thermally activated wall movement in a wide range of temperature
826
Investigation of the thermodynamic effects of lignite and biomass co-firing
827
Investigation of the thermo-flowfield in an underground concentrating solar tower
828
Investigation of the Thermomechanical Coupling Strength in Titanium Alloys
829
Investigation of the thermo-optical distortions in the active element and of quality of generated radiation of the axially-diode pumped solid-state laser
830
Investigation of the thermo-oxidative degradation of plastic Bonded Rare-Earth-Magnets during the injection molding process
831
Investigation of the thickness of lubricant film on gold plated surface
832
Investigation of the three competing VHF digital data link communications technology for commercial aviation
833
Investigation of the three-channel optical system with separated lenses of the channels
834
Investigation of the Threshold of Second Carrier Sensing in RFID Deployment
835
Investigation of the Threshold Voltage Difference between Partially-Depleted SOI and bulk CMOS transistors
836
Investigation of the threshold voltage instability after distributed cycling in nanoscale NAND Flash memory arrays
837
Investigation of the threshold voltage of MOSFETs with position and potential-dependent interface trap distributions using a fixed-point iteration method
838
Investigation of the throughput and delay performance of MP-CSMA/CD using an adaptive algorithm with 2 levels of priorities
839
Investigation of the Tilera processor for real time hazard detection and avoidance on the Altair Lunar Lander
840
Investigation of the Time of Flight estimation errors induced by neighboring signals
841
Investigation of the time-offset-based QoS support with optical burst switching in WDM networks
842
Investigation of the TiN Gate Electrode With Tunable Work Function and Its Application for FinFET Fabrication
843
Investigation of the Tm -> Ho enerrgy transfer and upconversion losses in diode-pumped LiYF/sub 4/
844
Investigation of the tolerance of wavelength-routed optical networks to inaccuracy in traffic load forecasts
845
Investigation of the topographical effects on the precipitation distribution over Turkey by satellite data
846
Investigation of the torque calculation of a DC PM motor
847
Investigation of the torque calculation of a DC PM motor
848
Investigation of the Torsion and Bending effects on Static Stability of Electrostatic Torsional Micromirrors
849
Investigation of the Torsional Performance of Superconducting Generators with an Advanced Network-Torsion-Machine Program
850
Investigation of the Torsional Performance of Superconducting Generators With an Advanced Network-Torsion-Machine Program
851
Investigation of the torsional vibration and transient stability margin for doubly-fed induction generators
852
Investigation of the touch processing model in human grasping based on the stick ratio within a fingertip contact interface
853
Investigation of the Touschek Effect in VUV Electron Storage Ring
854
Investigation of the Trace Line Failure Mechanism and Design of Flexible Wafer Level Packaging
855
Investigation of the trade-off between time window length, classifier update rate and classification accuracy for restorative brain-computer interfaces
856
Investigation of the trade-off characteristics of beamforming performance in DS-CDMA system
857
Investigation of the transform domain code division multiple access
858
Investigation of the Transformation Between Differential-Mode and Common-Mode Noises in an EMI Filter Due to Unbalance
859
Investigation of the transient behaviour of a current-fed autopiloted asynchronous induction machine
860
Investigation of the transient disturbances on industrial mains supplies
861
Investigation of the transient electrical behavior of the ITER central solenoid model coil (CSMC) during safety discharge
862
Investigation of the transient electromagnetic fields radiated or scattered by three-dimensional conducting bodies
863
Investigation Of The Transient Electromagnetic Processes And Forces In Metallic Environment Of Large Superconducting Magnets By An Optimized Finite Element Approach
864
Investigation of the transient electromagnetic processes and forces in metallic environments of large superconducting magnets by an optimized finite element approach
865
Investigation of the transient fields of perfectly conducting rotational bodies
866
Investigation of the Transient Performance of Superconducting Generators with an Advanced Network-Torsion-Machine Program
867
Investigation of the Transient Performance of Superconducting Generators With an Advanced Network-Torsion-Machine Program
868
Investigation of the Transition Between Two Different EBG Waveguides
869
Investigation of the transmission line impedance effects on voltage quality and flicker emission for grid connected to wind turbines
870
Investigation of the Transmission Line Loss on the Performance of the HBT_HEMT Matrix Amplifier
871
Investigation of the transmission properties of High Power Microwave induced surface flashover plasma
872
Investigation of the transmitter susceptibility to reverse intermodulation by the use of double-frequency diagrams
873
Investigation of the Transport Properties of Silicon Nanowires Using Deterministic and Monte Carlo Approaches to the Solution of the Boltzmann Transport Equation
874
Investigation Of The Transverse-mode Properties Of Laser Cavities Equipped With Interferometric Frequency Filtering Elements
875
Investigation of the trap states in quenched and annealed nylon 6 films using thermally stimulated depolarization current
876
Investigation of the Treadport for gait rehabilitation of spinal cord injury
877
Investigation of the Tunability of the Spin Configuration Inside Exchange Coupled Springs of Hard/Soft Magnets
878
Investigation of the Tuning Behaviour of a Single-Frequency Tm:YAG Laser with External Feedback
879
Investigation of the tunnel barrier in Nb-based junctions prepared by sputtering and electron beam evaporation
880
Investigation of the turn-off characteristics of a GTO thyristor in an inductive-based pulse forming network
881
Investigation of the Turn-ON of T-RAM Cells Under Transient Conditions
882
Investigation of the two-dimensional quantum wells made by the dye incorporation into the SiO
2
sol-gel glass
883
Investigation of the two-stream instability in InSb
884
Investigation of the type inversion phenomena: resistivity and carrier mobility in the space charge region and electrical neutral bulk in neutron irradiated silicon p
+
-n junction detectors
885
Investigation of the type inversion phenomena: resistivity and carrier mobility in the space charge region and electrical neutral bulk neutron irradiated silicon p
+
-n junction detectors
886
Investigation of the Type-2 Fuzzy Logic Approach to Classification in an EEG-based Brain-Computer Interface
887
Investigation of the ultrasonic transducer suitability for spread spectrum systems
888
Investigation of the ultraviolet lasing characteristics of zinc hexagonal microtubes
889
Investigation of the UMTS to GSM handover procedure
890
Investigation of the uncertainty using the line-injection method for the determination of the screening attenuation of high voltage cables
891
Investigation of the undercooling of SnCu solder spheres
892
Investigation of the underfill delamination and cracking in flip-chip modules under temperature cyclic loading
893
Investigation of the underfill delamination and cracking in flip-chip modules under temperature cyclic loading
894
Investigation of the underground structure elements of GSM towers with GPR and GSM signal effects in GPR data
895
Investigation of the underground temperature using neural network
896
Investigation of the Unified Rain Attenuation Prediction Method With Data From Tropical Climates
897
Investigation of the urbanistical complexity in global scale
898
Investigation of the usability of 2D- and 3D-FEM for a hybrid stepper motor
899
Investigation of the usability of pseudo-haptic feedback in teleoperation
900
Investigation of the usage of averaged instantaneous frequency parameter along with mean and median frequency in electromyogram (emg) analysis
901
Investigation of the use of a novel meshless technique in the determination of electromagnetic fields in two-dimensional regions
902
Investigation of the Use of Acceleration Estimates by Endgame Guidance Laws
903
Investigation of the use of analog design methods for the integration of a high frequency mixed analog digital fiber optic receiver
904
Investigation of the use of embedded Web Services in smart metering applications
905
Investigation of the use of inverter control strategy instead of synchronous condensers at inverter terminal of an HVDC system
906
Investigation of the use of inverter control strategy instead of synchronous condensers at inverter terminal of an HVDC system
907
Investigation of the use of neural networks for anti-skid brake system design
908
Investigation of the use of rotating linearly polarized light for characterizing SiO
2
thin-film on Si substrate
909
Investigation of the use of the global system for mobile communications (GSM) network for metering and load management telemetry
910
Investigation of the use of X-ray CT images for attenuation compensation in SPECT
911
Investigation of the utilisation of social networks in e-learning at universities
912
Investigation of the variability of Doppler spectra with radar frequency and grazing angle
913
Investigation of the Vector Jiles–Atherton Model and the Fixed Point Method Combined Technique for Time-Periodic Magnetic Problems
914
Investigation of the Vegetative Covers on Ploughed Areas by SLAR
915
Investigation of the velocity distribution of the droplets emitted by liquid-metal explosive-emission cathodes
916
Investigation of the vertical IMOS-transistor by device simulation
917
Investigation of the Virtual Synchronous Machine in the island mode
918
Investigation of the vivaldi array for Square Kilometer Array (SKA) application using the parallelized FDTD code GEMS on the LOFAR blue gene/L supercomputer
919
Investigation of the voltage of arc ignition between vacuum interrupter contacts after the arcing
920
Investigation of the Vortex Behavior in High - Tc Superconductors by Local Magnetic
921
Investigation of the W-band PAA with ferrite phase shifters
922
Investigation of the wetting properties of Cu
6
Sn
5
intermetallic compound
923
Investigation of the winding current distribution in a 4-quadrant-transducer prototype machine
924
Investigation of the wireless ZigBee modules characteristics during their indoor operation
925
Investigation of thermal and mechanical stresses of arcing contacts in circuit breakers
926
Investigation of thermal and methanol-vapor treatments for MgTPP as an optical gas sensor
927
Investigation of thermal annealing of schungite in ammonium chloride medium
928
Investigation of Thermal Balance in Mammals by Means of Microwave Radiation
929
Investigation of thermal behaviour and kinetic analysis of Pakistani biomass: Rice husk, sugarcane bagasse and wheat straw using thermogravimetric analysis
930
Investigation of thermal breakdown mechanism in 0. 13 /spl mu/m technology ggNMOS under ESD conditions
931
Investigation of thermal budget impact on core CMOS SRAM device in an embedded FLASH technology
932
Investigation of thermal characteristics of a silicon-based LED packaging module
933
Investigation of thermal characteristics of palm in order to develop a communication device for the Deaf-blind
934
Investigation of thermal conductivity of PCB
935
Investigation of Thermal Crosstalk Between SOI FETs by the Subthreshold Sensing Technique
936
Investigation of Thermal Demagnetization Effects in Data Recorded on Advanced Barium Ferrite Recording Media
937
Investigation of thermal effect in permanent magnet linear motor stage
938
Investigation of thermal effect in vitro liver and lung induced by a HIFU transducer
939
Investigation of thermal effects in a resonance condition of microfibre double-knot resonators as high-order filter
940
Investigation of thermal effects in quantum-cascade lasers
941
Investigation of thermal effects on embedded microcoil resonators
942
Investigation of thermal energy losses in the powertrain of an electric city bus
943
Investigation of thermal fatigue life scatter of IVH in PWB
944
Investigation of Thermal Feedback Design for Improved Load-Following Capability of Thorium Molten Salt Reactors
945
Investigation of thermal interface material on system-level light-emitting diode
946
Investigation of thermal interface materials using phase-sensitive transient thermoreflectance technique
947
Investigation of thermal inversions as a major contributer to the Black cloud episodes over Cairo
948
Investigation of thermal management method for coil and capacitor in automobile ECU
949
Investigation of Thermal Neutron Induced Soft Error Rates in Commercial Srams with 0.35 μm to 90 nm Technologies
950
Investigation of Thermal Noise in UTB GOI and SOI Devices
951
Investigation of Thermal Nonequilibrium in a Plasma Arc Welding Process: Modeling and Diagnostics
952
Investigation of thermal performance of a copper heat pipe with TiO
2
nanoparticles
953
Investigation of thermal performance of various power-device packages
954
Investigation of thermal performance of various power-device packages
955
Investigation of thermal processes in high power laser bars by thermoreflectance spectroscopy
956
Investigation of thermal properties of power LED illumination assemblies
957
Investigation of Thermal Quench Characteristic in the HTS Bi-2223 Racetrack Coil
958
Investigation of Thermal Stability in Multifinger GaInP/GaAs Collector-Up Tunneling–Collector HBTs With Subtransistor Via-Hole Structure
959
Investigation of Thermal Stability of High-kappa Interpoly Dielectrics in TaN Metal Floating Gate Memory Structures
960
Investigation of thermal stability of UV written planar waveguides using direct grating writing
961
Investigation of thermal storage options for Concentrating Solar Power plants
962
Investigation of thermal stress in the rotor of Doubly-Fed Induction Generators at synchronous operating point
963
Investigation of thermal stress influence on CMUT in standard CMOS process
964
Investigation of thermal type microsensor with infrared photonic crystal
965
Investigation of thermally activated charging effects in RF-MEMS switches
966
Investigation of thermally conductive ceramic substrates for high-power LED application
967
Investigation of thermally generated gold nanoparticles with AFM
968
Investigation of thermally generated leakage currents in silicon pn-junctions by means of 2D-Device Simulations
969
Investigation of thermally induced failure mechanisms in integrated spiral planar power passives
970
Investigation of thermally oxidized silicon surfaces using metal-oxide-semiconductor structures
971
Investigation of thermally robust single-component resistive switching organic memory cell
972
Investigation of Thermal-Mechanical and Moisture Driven Delamination in Lead-free QFN Packages during SMT Reflow Soldering Process
973
Investigation of thermal-mechanical stress and chip-packaging-interaction issues in low-k chips
974
Investigation of thermoelastic instabilities of wet clutches
975
Investigation of thermomechanical behaviors of flip chip BGA packages during manufacturing process and thermal cycling
976
Investigation of thermo-mechanical stresses and reliability of 3D die-stack structures by synchrotron x-ray micro-diffraction
977
Investigation of thermo-mechanically induced stress in a PQFP 160 using finite element techniques
978
Investigation of thermomigration in composite SnPb solder joints
979
Investigation of thermooptical effects in a high-brightness Yb:KGW laser
980
Investigation of Thermosonic Wire Bonding Resistance of Gold Wire Onto Copper Pad
981
Investigation of thick coax-to-waveguide transitions
982
Investigation of thick diamond films growth in different cvd reactors
983
Investigation of thick film electronic packaging materials in dynamic contact with artificial body fluids
984
Investigation of Thick-Film Polyaniline-Based Conductimetric pH Sensors for Medical Applications
985
Investigation of Thickness Effect on Electric Breakdown Strength of Polymers Under Nanosecond Pulses
986
Investigation of thickness effects on 2D NACA symmetric foils
987
Investigation of thickness effects on AlN coated metal tips by in situ I-V measurement
988
Investigation of thin aluminium films on the rear of monocrystalline silicon solar cells for back surface field formation
989
Investigation of Thin and Broadband Capacitive Surface-Based Absorber by the Impedance Analysis Method
990
Investigation of thin film DC SQUID gradiometer using a single YBCO layer
991
Investigation of thin film transistor based on ZnO nanowires via screen-printing method
992
Investigation of thin films by nanoindentation with doe and numerical methods
993
Investigation of thin magnetic films switching in stroboscopic transmission electron microscope
994
Investigation of thin small outline package (TSOP) solder joint crack after accelerated thermal cycling testing
995
Investigation of thin thermoluminescent films of mixed CaSO
4
and P(VDF-TrFE) copolymers and its blends with PMMA for digital radiography
996
Investigation of thin-film nanocomposite materials by monochromatic null ellipsometry
997
Investigation of thionin interacting with guanine-rich duplexes and hairpin quadruplexes by satellite holes
998
Investigation of thrasher compression fittings on BPA´s direct current transmission line
999
Investigation of Three Level Code Division Multiplexing performance over high speed optical fiber communication system
1000
Investigation of three phase squirrel cage induction motor coated with ZrO
2
nano composite
