Title List مقالات لاتين فني مهندسي Fabrication and characterization of Pb<inf>1−x</inf>Yb<inf>x</inf>Te based alloy thin film thermoelectric generators using thermal evaporation method Fabrication error analysis on dual-mass silicon micro-gyroscope

بر اساس عنوان

1

Fabrication and characterization of Pb1−xYbxTe based alloy thin film thermoelectric generators using thermal evaporation method

2

Fabrication and characterization of PDMA inductors

3

Fabrication and characterization of PECVD oxynitride rectangular and rib optical waveguides

4

Fabrication and characterization of periodic nano-faceting structures on patterned vicinal [110] GaAs substrates by MOVPE

5

Fabrication and characterization of photonic crystal based symmetric Mach-Zehnder (PC-SMZ) structures toward ultra-small all-optical switching devices

6

Fabrication and characterization of photonic crystal microcavities in quasi-single crystal diamond films

7

Fabrication and characterization of photonic crystal nanocavity with degenerated cavity modes for generating entangled photon pairs using quantum dots

8

Fabrication and characterization of photonic crystal slab waveguides and application to ultra-fast all-optical switching devices

9

Fabrication and characterization of photonic crystal-based symmetric Mach-Zehnder (PC-SMZ) structures based on GaAs membrane slab waveguides

10

Fabrication and characterization of photonic devices directly written in glass using femtosecond laser pulses

11

Fabrication and characterization of photonic devices directly written in glass using femtosecond lasers

12

Fabrication and characterization of photorefractive platforms in lithium niobate for recording of integrated holographic devices

13

Fabrication and characterization of physically-defined double quantum dots without unintentional localized states on highly-doped silicon substrate

14

Fabrication and characterization of piezoelectric cantilever array with nano-assembly carbon nanotube tips

15

Fabrication and characterization of piezoelectric ceramic actuators with functional gradients

16

Fabrication and characterization of piezoelectric microgenerators for flexible energy harvesting using P(VDF-TrFE) screen-formulated inks

17

Fabrication and characterization of piezoelectric micromachined ultrasonic transducers with thick composite PZT films

18

Fabrication and characterization of piezoelectric thick film elements and arrays

19

Fabrication and characterization of piezoresistive strain sensors for high temperature applications

20

Fabrication and characterization of planar integrated Schottky devices for very high frequency mixers

21

Fabrication and characterization of planar waveguide couplers for multimode fiber-based local area networks

22

Fabrication and characterization of PMN-PT thin films

23

Fabrication and characterization of p-NiO/n-ZnO heterojunction towards transparent diode

24

Fabrication and characterization of poly-3-hexylthiophene based organic thin film transistor

25

Fabrication and characterization of polyaniline based Schottky diode

26

Fabrication and characterization of polycrystalline SiC resonators

27

Fabrication and Characterization of Polymer Hollow Microneedle Array Using UV Lithography Into Micromolds

28

Fabrication and characterization of polymer optical waveguides with integrated micromirrors for three-dimensional board-level optical interconnects

29

Fabrication and characterization of polymeric optical waveguides using standard silicon processing technology

30

Fabrication and characterization of polymeric p-channel junction FETs

31

Fabrication and Characterization of Poly-Si Nanowire Devices with Performance Enhancement Techniques

32

Fabrication and characterization of polysilicon for DNA detection

33

Fabrication and characterization of polysilicon nanogap device for DNA hybridization detection

34

Fabrication and characterization of porous metal body by PU dipping process

35

Fabrication and characterization of porous polycrystalline silicon resistive sensor

36

Fabrication and characterization of porous silicon nanoparticles for siRNA delivery

37

Fabrication and Characterization of Porous Silicon on crystalline Silicon based devices

38

Fabrication and Characterization of Potassium Ion-Selective Electrode Based on Porous Silicon

39

Fabrication and characterization of p-poly(9, 9-diethyl fluorene)/ n-ZnO nanorods hybrid heterojunction

40

Fabrication and characterization of precisely graded parabolic quantum wells using monolayer deposition

41

Fabrication and characterization of pressed Y2O3 doped Ba-W dispenser cathode

42

Fabrication and characterization of pressure sensor, and enhancement of output characteristics by modification of operating pressure range

43

Fabrication and characterization of printed perovskite-based photodiodes

44

Fabrication and Characterization of Probes for Combined SPM Techniques Based on PECVD

45

Fabrication and Characterization of Proton-Exchanged Waveguide on X-Cut LiNbO3

46

Fabrication and characterization of Pt Archimedean-spiral interdigitated microelectrodes with containing trenches

47

Fabrication and characterization of Pt nanosplit emitter using electron beam induced deposition

48

Fabrication and characterization of Pt-oxide electrode for FeRAM application

49

Fabrication and characterization of p-type ZnO nano-thin films prepared by in situ oxidation of sputtered Zn3N2

50

Fabrication and Characterization of PZT Thin Film Capacitors for MMIC Applications

51

Fabrication And Characterization Of PZT Thin Films For Micromotors

52

Fabrication and Characterization of PZT-Based Piezoelectric Ceramics and Power Therapeutic Transducer

53

Fabrication and characterization of PZT-PAni/PVDF based nanocomposite

54

Fabrication and characterization of quantum Hall devices for the resistance standard at CMS

55

Fabrication and characterization of radome structure

56

Fabrication and characterization of ramp edge-type junction and SQUIDs

57

Fabrication and characterization of resonant aerosol particle mass sensors

58

Fabrication and characterization of resonant cavity enhanced silicon photodetectors at 1.55 μm

59

Fabrication and characterization of RF MEMS high isolation switch upto X-band

60

Fabrication and Characterization of RF MEMS Package Based on LTCC Lid Substrate and Gold-Tin Eutectic Bonding

61

Fabrication and characterization of RF-MEMS switch in V-band

62

Fabrication and Characterization of Room Temperature Nuclear Radiation CdZnTe 3×3 Pixel Array Detector

63

Fabrication and characterization of room-temperature-bonded composite lasers

64

Fabrication and characterization of RTD-HBT inverter

65

Fabrication and characterization of SAW IDT biosensor for biomolecule detection

66

Fabrication and characterization of self-aligned ZnO and TiO2 nanostructured films

67

Fabrication and Characterization of Self-Organized Alq2Chiral Thin Film Nanostructures

68

Fabrication and Characterization of Self-scrolling Si/Cr Micro- and Nanostructures

69

Fabrication and characterization of self-standing w-nanodendrites on insulator SiO₂ substrate with electron-beam-induced deposition in HVTEM

70

Fabrication and Characterization of Semiconductive Ceramics using BaTiO3-(Bi1/2K1/2)TiO3 System

71

Fabrication and characterization of semiconductor quantum dot lasers

72

Fabrication and characterization of Si/ ∼10-μm mesa-etched Si junctions by surface activated bonding

73

Fabrication and Characterization of Si/GaInP Heterojunction Photodetectors

74

Fabrication and characterization of Si/SiGe quantum dots with capping gate

75

Fabrication and characterization of Si/ZnO branched heterojunction structures

76

Fabrication and characterization of Si-based bipolar transistor structures using low-temperature bonding

77

Fabrication and characterization of SiC thin films

78

Fabrication and Characterization of Sidewall Defined Silicon-on-Insulator Single-Electron Transistor

79

Fabrication and characterization of silica aerogel films for air-coupled piezoelectric transducers in the megahertz range

80

Fabrication and Characterization of Silicon FEAs with Focusing Electrode by CMP Process

81

Fabrication And Characterization Of Silicon Field Emission Diodes And Triodes

82

Fabrication and characterization of silicon micro mirror with CNT hinge

83

Fabrication and characterization of silicon micromirror with carbon nanotubes-nickel nanocomposite beams

84

Fabrication and characterization of silicon nanowire ultra-thin channel poly-Si junctionless field effect transistors with a trench structure

85

Fabrication and characterization of silicon nanowires using STL for biosensing applications

86

Fabrication and characterization of silicon nitride nanopore

87

Fabrication and characterization of silicon on permalloy film

88

Fabrication and characterization of silicon photonic waveguides and devices via selective oxidation process

89

Fabrication and characterization of silicon-based Ba0.7Sr0.3TiO3 thin films for FeFET applications

90

Fabrication and Characterization of Silicon-Polymer Beam Structures for Cantilever-Type Tactile Sensors

91

Fabrication and Characterization of Silk-Fibroin-Coated Quantum Dots

92

Fabrication and characterization of Si-MOSFET´s with PECVD amorphous Ta₂O₅ gate insulator

93

Fabrication and characterization of single crystalline 4H-SiC MEMS devices with n-p-n homoepitaxial structure

94

Fabrication and characterization of single Nb/NbxSi1−x/Nb Josephson junction for voltage standard

95

Fabrication and characterization of single-crystalline Au nanowire electrodes

96

Fabrication and characterization of single-electron tunneling transistors in the superconducting state

97

Fabrication and characterization of single-walled carbon nanotube saturable absorbers for solid-state laser mode-locking near 1 μm

98

Fabrication and characterization of size-controlled CdS nanostructures by a modified chemical bath deposition method

99

Fabrication and Characterization of Small Optical Ridge Waveguides Based on SU-8 Polymer

100

Fabrication and characterization of SnS films deposited on different substrates by modified versition of PECVD

101

Fabrication and characterization of SNS Josephson junctions with an aluminum barrier

102

Fabrication and characterization of S-N-S planar microbridges

103

Fabrication and characterization of SOA and phase shifter integrated interferometer all-optical switches by single-step GaInAsP/InP selective area MOVPE

104

Fabrication and characterization of sol-gel hydroxyapatite-forsterite-bioactive glass nanocomposite coating for biomedical applications

105

Fabrication and characterization of solution doped gallium and barium preforms

106

Fabrication and characterization of spinel magnetic nanoparticle thin film transmission lines

107

Fabrication and Characterization of Spinel Magnetic Nanoparticle Thin Film Transmission Lines

108

Fabrication and characterization of stimulus nerve cuff electrode with highly roughened surface for chronic implant

109

Fabrication and characterization of stop flow valves for fluid handling

110

Fabrication and characterization of sub-micron thin film intrinsic Josephson junction arrays

111

Fabrication and characterization of sub-micron thin gate oxide p-channel transistors with p+ polysilicon gates

112

Fabrication and characterization of sub-quarter-micron MOSFETs with a copper gate electrode

113

Fabrication and characterization of superconducting circuit QED devices for quantum computation

114

Fabrication and Characterization of Superconducting Nanowire Single-Photon Detectors on Si Waveguide

115

Fabrication and Characterization of Superconducting NbN Nanowire Single Photon Detectors

116

Fabrication and Characterization of Superconducting Probe Coil for High-Sensitivity NMR Spectroscopy

117

Fabrication and characterization of superconducting X-ray calorimeters with transition edge sensors

118

Fabrication and characterization of surface and buried optical waveguides made by ion exchange on glass

119

Fabrication and characterization of surface micromachined capacitive ultrasonic immersion transducers

120

Fabrication and characterization of surface micromachined CMUT with a bossed membrane

121

Fabrication and Characterization of Surface-Micromachined Compact Microheater for Gas Sensing Applications

122

Fabrication and characterization of surface-modified dry electrode for monitoring biopotential

123

Fabrication and characterization of suspended carbon nanotubes

124

Fabrication and characterization of symmetric Mach-Zehnder structure based on 2D photonic crystal waveguide for all-optical switches

125

Fabrication and characterization of tellurite air-clad fiber with controlled dispersion for supercontinuum generation

126

Fabrication and Characterization of Temperature Insensitive 660-nm Resonant-Cavity LEDs

127

Fabrication and characterization of template-stripped plasmonic substrates for high-resolution chemical imaging

128

Fabrication and characterization of terahertz emitting GaAs/AlGaAs micropillar quantum cascade structures in a double metal waveguide

129

Fabrication and characterization of tetragonal and orthorhombic TeO ₂ films

130

Fabrication and Characterization of the ${\\rm MgB}_{2}$ Bulk Superconductors Doped by Carbon Nanotubes

131

Fabrication and characterization of the amorphous-silicon static induction transistor

132

Fabrication and Characterization of the Capillary Performance of Superhydrophilic Cu Micropost Arrays

133

Fabrication and Characterization of the Charge-Plasma Diode

134

Fabrication and characterization of the oxide-cladding-type AlGaAs-based photonic-crystal slab waveguides sandwiched between partially oxidized ridge waveguides

135

Fabrication and Characterization of the Piezoelectric Microcantilever Integrated with PZT Thin-Film Microforce Sensor and Actuator

136

Fabrication and characterization of the quantum Hall devices

137

Fabrication and characterization of the ZnO-based Memristor

138

Fabrication and characterization of thermally conducting laminate using spherical aluminum nitride powders and synthesized twin mesogenic epoxy oligomer

139

Fabrication and Characterization of Thermally Evaporated Omnidirectional Mirrors

140

Fabrication and characterization of thick-film piezoelectric lead zirconate titanate ceramic resonators by tape-casting

141

Fabrication and characterization of thin c-Si solar cells by low cost methods

142

Fabrication and characterization of thin films of CuIn(S,Se)₂ quaternary compounds obtained by close-spaced vapor transport

143

Fabrication and Characterization of Thin-Barrier $\\hbox {Al}_{0.5}\\hbox {Ga}_{0.5}\\hbox {N/AlN/GaN}$ HEMTs

144

Fabrication and characterization of thin-film nanostructured Lüneburg lens

145

Fabrication and characterization of thin-film silicon solar cells on alumina ceramic

146

Fabrication and characterization of thin-film transistor using dielectrophoretic assembly of single-walled carbon nanotube

147

Fabrication and Characterization of Three-Dimensional Microlens Arrays in Sol-Gel Glass

148

Fabrication and Characterization of Through-Substrate Interconnects

149

Fabrication and characterization of THz metamaterials

150

Fabrication and characterization of THz plasmonic filter

151

Fabrication and characterization of Ti modified BiFeO3-PbTiO3 high temperature piezoelectric ceramics

152

Fabrication and characterization of tough elastomeric fibrous scaffolds for tissue engineering applications

153

Fabrication and characterization of transducer elements in two-dimensional arrays for medical ultrasound imaging

154

Fabrication and characterization of transducer elements in two-dimensional arrays for medical ultrasound imaging

155

Fabrication and characterization of trapezoidal electrode array for dielectrophoretic separation

156

Fabrication and characterization of traveling wave dielectrophoretic (twDEP) microfluidic devices

157

Fabrication and characterization of tree-like nanorod arrays for bionic gecko foot-hairs

158

Fabrication and Characterization of Triple-junction Amorphous Silicon Based Solar Cell with Nanocrystalline Silicon Bottom Cell

159

Fabrication and characterization of truly 3-D diffuser/nozzle microstructures in silicon

160

Fabrication and characterization of tungsten-oxide-based memristors for neuromorphic circuits

161

Fabrication and characterization of twin poly-Si thin film transistors EEPROM with nitride trapping layer

162

Fabrication And Characterization Of Two-dimensional Phase-locked Arrays Of Vertical Cavity Surface Emitting Lasers

163

Fabrication and Characterization of Two-Dimensional Photonic Crystal on Silicon by Efficient Methods

164

Fabrication and characterization of two-dimensional photonic crystal waveguides etched in InP-based heterostructure

165

Fabrication and characterization of ultra compact silicon-on-insulator micro-ring resonator add-drop-multiplexer for dense wavelength division multiplexing

166

Fabrication and characterization of ultra-large core size (>100 μm) Kagome fiber for laser power handling

167

Fabrication and characterization of ultrathin fine-pitch flexible polyimide interposer

168

Fabrication and Characterization of Ultrathin MgB₂ Films for Hot-Electron Bolometer Applications

169

Fabrication and Characterization of Ultrathin PBCO/YBCO/PBCO Constrictions for Hot Electron Bolometer THz Mixing Application

170

Fabrication and characterization of ultra-thin PIN detector

171

Fabrication and Characterization of Ultra-Thin PIN Silicon Detectors for Counting the Passage of MeV Ions

172

Fabrication and characterization of undoped polysilicon nanowire for pH sensor

173

Fabrication and characterization of uniform conformal thin films of SiO2 and SiNx on optical fibers

174

Fabrication and characterization of uni-traveling-carrier photodetectors (UTC-PDs) with dipole-doped structure at InGaAs/InP interface

175

Fabrication and characterization of U-shaped beams for the determination of Young´s modulus modification due to Joule heating of polysilicon microstructures

176

Fabrication and characterization of various carbon-clad silicon microtips with ultra-small tip radii

177

Fabrication and characterization of vertical silicon nanopillar Schottky diodes

178

Fabrication and characterization of vertically aligned carbon nanofibers as a biosensor platform for hypoglycemia

179

Fabrication and characterization of vertically stacked Gate-All-Around Si Nanowire FET arrays

180

Fabrication and characterization of wafer-bonded cMUT arrays dedicated to ultrasound-image-guided FUS

181

Fabrication and characterization of wafer-level deep TSV arrays

182

Fabrication and characterization of waveguide for all optical switching device based on intersubband transition in JI-VI based quantum well

183

Fabrication and characterization of waveguide photodetector array for coherent optical communication application

184

Fabrication and characterization of wavelength-tunable grating-assisted codirectional coupler filter with very narrow bandwidth

185

Fabrication and Characterization of White Light Emitting Diodes Based on ZnO Nano-Rods Grown on p-Si

186

Fabrication and Characterization of X-Ray Spectroscopic Imaging Arrays Based on Thick Single-Crystal CdTe Epitaxial Layers

187

Fabrication and characterization of Yb³⁺:Er³⁺ phosphosilicate fibers for lasers

188

Fabrication and characterization of YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta///SrTiO/sub 3//Ag trilayer films on SrTiO/sub 3/ bicrystal substrates

189

Fabrication and characterization of YBa/sub 2/Cu/sub 3/O/sub 7-x/ grain-boundary Josephson junctions on [110] NdGaO/sub 3/ bicrystal and single-twin substrates

190

Fabrication and characterization of YBa₂Cu₃O ₇/Au/YBa₂Cu₃O₇ Josephson junctions

191

Fabrication and characterization of Y-Ba-Cu-O and Nd-Ba-Cu-O ramp-edge junctions with an interface-modified barrier

192

Fabrication and characterization of YBCO microstrip delay lines

193

Fabrication and characterization of zinc oxide nanowires for high-sensitivity sensing applications

194

Fabrication and characterization of zirconium — Doped Periodically Poled Lithium Niobate

195

Fabrication and Characterization of ZnO Films for Biological Sensor Application of FPW Device

196

Fabrication and Characterization of ZnO Films for Biological Sensor Application of FPW Device

197

Fabrication and characterization of ZnO nanorods by hydrothermal growth process for DNA detection

198

Fabrication and characterization of ZnO piezoelectric films for sensor devices

199

Fabrication and characterization of ZnO thin film on interdigitated electrode by sol-gel spin coating method for DNA detection

200

Fabrication and Characterization of ZnO/p-Si and TiO₂/p-Si Heterojunctions for Hydrogen Detection—Influence of Pd Functionalization

201

Fabrication and characterization of ZnO:PPLN crystal fiber by electric-field induced micro-swing technique

202

Fabrication and characterization of ZnSnxGe1?xN2 alloys for light absorbers

203

Fabrication and characterizations of frequency-tunable soft composite antennas for wireless sensing

204

Fabrication and characterizations of multiferroic super-lattice thin films BaTiO3/BaFeO3

205

Fabrication and charaterizaion of resonator using multi-wall cabon nanotubes

206

Fabrication and Charge Transport Modeling of Thin-Film Transistor Based on Carbon Nanotubes Network

207

Fabrication and chrarcterization silicon thin film solar cells deposited by HF-PECVD

208

Fabrication and classical characterisation of an integrated optic controlled phase gate

209

Fabrication and comparison Gd2O2S(Tb) and CsI(Tl) films for X-ray imaging detector application

210

Fabrication and comparison of linear power supplies for low-moderate voltage applications

211

Fabrication and component testing results for a Nb/sub 3/Sn dipole magnet

212

Fabrication and control of a 6-DOF magnetic levitation stage with nanopositioning capability

213

Fabrication and Control of Rectilinear Artificial Muscle Actuator

214

Fabrication and control of thin-film aluminum microheater and nickel temperature sensor

215

Fabrication and coupling-to-fibre characteristics of laser diodes integrated with a spot-size converter having a lateral taper

216

Fabrication and crystallization of AAO template for sensor applications

217

Fabrication and current-drive of SiGe/Si ´Micro-origami´ epitaxial MEMS device on SOI substrate

218

Fabrication and DC characterization of InAs/AlSb self-switching diodes

219

Fabrication and DC current-voltage characteristics of real space transfer transistor with dual-quantum-well channel

220

Fabrication and degradation characteristic of sputtered iridium oxide neural microelectrodes for FES application

221

Fabrication and demonstration of a pure silica-core waveguide utilizing a density-based index contrast

222

Fabrication and Demonstration of Electrowetting Liquid Lens Arrays

223

Fabrication and deployment of nanoscale fluorescent intracellular probes

224

Fabrication and design issues of bulk photoconductive switches used for ultra-wideband, high-power microwave generation

225

Fabrication and design of a heat transfer micro channel system at low temperature process by MEMS technique

226

Fabrication and design of an auto ventilation controller using micro gas sensor for the clean room/building environment

227

Fabrication and design of asymmetrical twin core fiber for passive mode-locking

228

Fabrication and design of asymmetrical twin core fiber for passive mode-locking

229

Fabrication and design of Diffractive Optical layer applied to Resonant Cavity LED

230

Fabrication and design of solar cell based on textile

231

Fabrication and development of a novel flux-concentration type linear induction motor

232

Fabrication and development of a novel flux-concentration type linear induction motor

233

Fabrication and development of Flat Fibers

234

Fabrication and device design of bulk and thin film photostrictive materials

235

Fabrication and device modeling of micro-textured conductive polymer/silicon heterojunction solar cells

236

Fabrication and dielectric properties of highly loaded polypropylene micro- and nano-composites

237

Fabrication and dielectric properties of polypropylene / silica nano-composites

238

Fabrication and dielectric properties of SCT thin film by RF sputtering method

239

Fabrication and dosimetry characteristics of intracavitary cones for radiotherapy

240

Fabrication and dynamic testing of electrostatic actuators with p ⁺ silicon diaphragms

241

Fabrication and effect of annealing on optical properties of single and bimetallic periodic array of different noble metals

242

Fabrication and Effects of Ag Nanoparticles Hexagonal Arrays in Green LEDs by Nanoimprint

243

Fabrication and Electric Calibration of Prototypic PWR Gamma Thermometers

244

Fabrication and Electrical Characterisation of n-InAs Single Nanowhisker Field-Effect Transistors

245

Fabrication and Electrical Characteristics of AgTCNQ Crossbar Switches for Organic Molecular Memories and Logics

246

Fabrication and electrical characteristics of memristors with TiO2/TiO2+x active layers

247

Fabrication and electrical characteristics of self-aligned (SA) gate-all-around (GAA) si nanowire MOSFETs (SNWFET)

248

Fabrication and electrical characterization of 3D vertical interconnects

249

Fabrication and electrical characterization of 5×50um through silicon vias for 3D integration

250

Fabrication and electrical characterization of Au/molecule/GaAs devices

251

Fabrication and electrical characterization of bottom-up silicon nanowire resonators

252

Fabrication and Electrical Characterization of Densified Carbon Nanotube Micropillars for IC Interconnection

253

Fabrication and electrical characterization of embedded actives and passives for system level analysis: Towards Size, Weight and Power (SWaP) reduction

254

Fabrication and electrical characterization of exfoliated graphene based devices

255

Fabrication and Electrical Characterization of Fully CMOS-Compatible Si Single-Electron Devices

256

Fabrication and electrical characterization of graphene oxide as transducing channel for biosensor application

257

Fabrication and electrical characterization of high performance copper/polyimide inductors

258

Fabrication and electrical characterization of MONOS memory with novel high- k gate stack

259

Fabrication and electrical characterization of NbN-interfacial layer-Si contact diodes

260

Fabrication and electrical characterization of Parylene-HT liner bottom-up copper filled through silicon via (TSV)

261

Fabrication and Electrical Characterization of SI/SIGE P-Channel MOSFETs with a Delta Doped Boron Layer

262

Fabrication and electrical characterization of silicon bipolar transistors in a 0.5-μm based BiCMOS technology

263

Fabrication and electrical characterization of ultra thin epitaxial γ-Al₂O₃ gate dielectric films on Si[100] by molecular beam epitaxy (MBE)

264

Fabrication and electrical characterization of vacuum deposited n-CdTe/p-ZnTe heterojunction diodes

265

Fabrication and electrical performance of high aspect ratio gated silicon field emission arrays

266

Fabrication and electrical properties of 0.9PMN-0.1PT MIM capacitors

267

Fabrication and electrical properties of lapped type of TMR heads for ∼50 Gb/in² and beyond

268

Fabrication and Electrical Properties of Random Addressable 100x100 Matrix of Field-Emission Cathodes

269

Fabrication and electrical property of single-walled carbon nanotube films

270

Fabrication and electrical transport properties of nickel monosilicide nanowires

271

Fabrication and electrochemical characterization of multi-walled carbon nanotubes film on a titanium mesh electrode

272

Fabrication and electrochemical comparison of SIROF-AIROF-EIROF microelectrodes for neural interfaces

273

Fabrication and electrochemical treatment of the carbon fiber electrode in the neurotransmitters measurement via voltammetry

274

Fabrication and electromagnetic characterization of novel self-metallized thin films

275

Fabrication and electromagnetic properties of planar variable-thickness S-N-S microbridges

276

Fabrication and electron emission of carbon microtubes

277

Fabrication and electron field emission properties of titanium-oxide nanowire

278

Fabrication and electron transport in vertical silicon-silicon nitride-silicon multilayer nano-pillars

279

Fabrication and electronic characterization of epitaxial Gd2O3-doped HfO2 dielectrics on Si

280

Fabrication and Electronic Properties of CZTSe Single Crystals

281

Fabrication and emission characteristic of InGaN/GaN multiple quantum wells nanorods

282

Fabrication and emission characteristics for a single magnetite whisker

283

Fabrication and emission characteristics from GaAs FEAs

284

Fabrication and emission characteristics of GaAs tip and wedge-shaped Field Emitter Arrays by wet etching

285

Fabrication and Emission Properties of Single Crystal Lanthanum Hexaboride Tip

286

Fabrication and emission property of LaC2-Mo cathode

287

Fabrication and emission property of polycrystalline CexPr1-xB6 bulk prepared by spark plasma sintering

288

Fabrication and emitter measurements for a nanoklystron: A novel THz micro-tube source

289

Fabrication and encapsulation of perovskites sensitized solid state solar cells

290

Fabrication and Energy Band Alignment of n-ZnO/p-CuI Heterojunction

291

Fabrication and estimation of characteristics for Nb-silicide FEAs

292

Fabrication and evaluation of 1.3 PZT fiber/epoxy composites

293

Fabrication and evaluation of a cryostable Nb3Sn superconductor for the Mirror Fusion Test Facility (MFTF-B)

294

Fabrication and evaluation of a flexible thermoelectric device using metal thin films

295

Fabrication and evaluation of a high performance SiC inverter for wireless power transfer applications

296

Fabrication and evaluation of a silicon probe array on a flexible substrate for neural recording

297

Fabrication and evaluation of a single element lead free-based ultrasonic transducer

298

Fabrication and evaluation of a single-element Bi_0.5Na_0.5TiO₃-based ultrasonic transducer

299

Fabrication and evaluation of amperometric sensors for micro flow cell using 3-D comb electrodes

300

Fabrication and evaluation of an "electrodeless" solidly mounted thin film electroacoustic resonator

301

Fabrication and evaluation of Bi-Te/Pb-Te cascade-type thermoelectric module

302

Fabrication and Evaluation of Carbon Nanotube-Parylene Functional Composite-Films

303

Fabrication and Evaluation of Cathode and Anode Materials for Implantable Hybrid Cells

304

Fabrication and evaluation of composite bipolar plate to develop a compact and lightweight direct methanol fuel cell stack

305

Fabrication and evaluation of conducting polymer composites as radar absorbers

306

Fabrication and evaluation of Dihedral Corner Reflector Array for floating image manufactured by synchrotron radiation

307

Fabrication and evaluation of electromagnetic defect detector for laser welding joint on stainless steel pipe

308

Fabrication and evaluation of floating gate memories with surface-nitrided Si nanocrystals

309

Fabrication and evaluation of GaAs-GaAlAs double-velocity IMPATT diodes

310

Fabrication and evaluation of gallium-doped multicrystalline silicon wafers and solar cells - a promising material for future photovoltaics

311

Fabrication and evaluation of heavily P-doped Si quantum dot and back-gate induced Si quantum dot

312

Fabrication and Evaluation of HgI2 Miniature Probes for in-Vivo Medical Applications

313

Fabrication and evaluation of implantable pressure sensor using strain gauge

314

Fabrication and evaluation of LiNbO/sub 3/ periodic waveguide with etched grooves

315

Fabrication and evaluation of magnetic hydrogel fiber based on micro fluidic device

316

Fabrication and evaluation of MCVD single-mode fibres with and without central index depression

317

Fabrication and evaluation of metal-oxide-semiconductor transistor probe

318

Fabrication and evaluation of nano probe pH sensor based on nanorobotic manipulation

319

Fabrication and evaluation of nanometer-size waveguide using scanning near-field optical microscope

320

Fabrication and Evaluation of Nano-Scale Optical Circuits Using Sol-Gel Materials With Photo-Induced Refractive Index Variation Characteristics

321

Fabrication and evaluation of niobium doped lead titanate thin films

322

Fabrication and Evaluation of PbTe-PbSnTe Elements for Isotopic Thermoelectric Generators

323

Fabrication and evaluation of piezoelectric drive type 2-axis tilt control device using epitaxial PZT thin film

324

Fabrication and evaluation of polymer MEMS mirror based on the mechanical characteristic of polymer containing magnetic particles

325

Fabrication and evaluation of Pt and Au hybrid and geometric Pt nano vehicle

326

Fabrication and Evaluation of Reconstructed Cardiac Tissue and Its Application to Bio-actuated Microdevices

327

Fabrication and evaluation of SiC inverter using SiC-MOSFET

328

Fabrication and evaluation of silicon micromechanical resonator using neutral beam etching technology

329

Fabrication and evaluation of submicron-square Si wire waveguides with spot size converters

330

Fabrication and evaluation of surface plasmon resonance optical sensor for heavy metal ions detection

331

Fabrication and Evaluation of the Directional Coupler Using CoFeB Metallic Magnetic Film/Polyimide Dielectric Film Hybrid Transmission Line

332

Fabrication and Evaluation of the Flexible and Implantable Soft Micro Electrode for Retinal Prosthesis

333

Fabrication and evaluation of the PDMS-based soft micro electrode for the retinal prosthesis

334

Fabrication and evaluation of thermal nano-sensor by focused-ion-beam chemical-vapor-deposition

335

Fabrication and evaluation of tunable submicron-thick monocrystalline silicon grating for integration on LSI circuit

336

Fabrication and evaluation of V-shaped MOS transistor probe

337

Fabrication and experiment of planar micro ion drag pump

338

Fabrication and experiment of polymeric diaphragm pressure sensors

339

Fabrication and experiment of the hemodialysis unit device

340

Fabrication and experiment studies of the piezoelectric micropump with saw-tooth microchannel

341

Fabrication and Experimental Analysis of 6.6 kV/100 A Class Single-Phase Superconducting Fault Current Controller With Superconducting DC Reactor Coil

342

Fabrication and experimental characterization of a planar array of micro-fabricated electrospray emitters for space propulsion applications

343

Fabrication and experimental characterization of cascaded SOI micro-rings for highthroughput label-free molecular sensing

344

Fabrication and Experimental Demonstration of a Four-Channel $,\\times,$ 40 Gb/s TriPleX All-Optical Wavelength Conversion Platform

345

Fabrication and experimental demonstration of a multichannel module for intra-MCM optical interconnects

346

Fabrication and experimental investigation of innovative sintered very thin copper heat pipes for electronics applications

347

Fabrication and experimental study of heat column

348

Fabrication and Experimental Testing of Individual Multi-walled Carbon Nanotube (CNT) based Infrared Sensors

349

Fabrication and experimental validation of high gain lens antenna for 71–86GHz band

350

Fabrication and experimental verification of a dielectrophoretic separation device

351

Fabrication and experimental verification of permittivity graded solid spacer for GIS

352

Fabrication and experimentation of vertical spring-type micromirror using shielding screen structure

353

Fabrication and Experiments on a 6-18 GHz, Vaned Helix TWT Amplifier

354

Fabrication and feedback control of an articulated microarm

355

Fabrication and field emission characteristics of high density carbon nanotubes microarrays

356

Fabrication and field emission characteristics of lateral diamond field emitter

357

Fabrication and Field Emission of Flower-like ZnO Nanowhiskers

358

Fabrication and field emission properties of gated field emitter arrays with hafnium nitride cathode

359

Fabrication and field emission study of gated DLC-coated silicon tips

360

Fabrication and Final Field Tuning of Copper Cavity Models for A High-Current SRF ERL at 703.75 MHz

361

Fabrication and flux-trapping experiments of a 198 mm×99 mm bulkmagnet using YBCO superconductors

362

Fabrication and friction drilling of aluminum silicon carbide metal matrix composite

363

Fabrication and functional demonstration of a smart electrode with a built-in CMOS microchip for neural stimulation of a retinal prosthesis

364

Fabrication and gain measurements for buried facet optical amplifier

365

Fabrication and heat treatment effects on absorption characteristics of glass fibers doped with PbTe semiconductor quantum dots

366

Fabrication and hermeticity testing of a glass-silicon package formed using localized aluminum/silicon-to-glass bonding

367

Fabrication and High-Temperature Characteristics of Ion-Implanted GaAs Bipolar Transistors and Ring-Oscillators

368

Fabrication and hydrogen sensing properties of doped titania nanotubes

369

Fabrication and hydrogen sensing properties of Titania nanotubes

370

Fabrication and implantation of hydrogel coated, flexible polyimide electrodes

371

Fabrication and improved characteristics of self-aligned dual-gate single-electron transistors

372

Fabrication and Improved Performance of GaN LEDs With Finger-Type Structure

373

Fabrication and improvement of polysilicon microdynamic gear wheels system

374

Fabrication and in vitro testing of porous silicon microcarriers

375

Fabrication and initial characterisation results of a micromachined biomimetic strain sensor inspired from the Campaniform sensillum of insects

376

Fabrication and in-plane electrical resistivity of Ge/SiGe quantum dot superlattices

377

Fabrication and in-situ characterization of Ni/sub 45/Fe/sub 55//Al/sub 2/O/sub 3//Ni/sub 45/Fe/sub 55/ tunnel junctions

378

Fabrication and in-situ evaluation of copper TSV interconnection

379

Fabrication and installation of the DIII-D radiative divertor structures

380

Fabrication and Installation Results for Albany HTS Cable

381

Fabrication and integration of high performance mixed signal and RF passive components in 0.13μm Cu BEOL technologies

382

Fabrication and integration of horizontally aligned carbon nanotube — C60 films for UV sensors

383

Fabrication and Integration of Micromachined Submillimeter-Wave Circuits

384

Fabrication and Integration technology for BioMEMs

385

Fabrication and interface electrical properties of Fe3O4/MgO/GaAs(100) spin contacts

386

Fabrication and interface reaction of Y-Ba-Cu-O superconducting thin films by reactive ion beam coating

387

Fabrication and Investigation of Arrayed Glucose Biosensor Based on Microfluidic Framework

388

Fabrication and investigation of fast response variable optical attenuator on silica substrate

389

Fabrication and Investigation of High Efficiency Evanescently Coupled Uni-Traveling Carrier Photodiodes

390

Fabrication and investigation of MOS modified Schottky barrier photodetector

391

Fabrication and investigation of Nitrogen doped ultra-nano-crystalline diamond Hall-bar devices

392

Fabrication and investigation of photonic crystal device with MEMS activated defects insertion

393

Fabrication and its response characteristics of MELO accelerometer

394

Fabrication and I-V characterization of carbon nanotube single electron transistor operated at room temperature

395

Fabrication and I-V characterization of metal/SAM/metal devices

396

Fabrication and Josephson properties of Nb3Ge

397

Fabrication and laser performance of polycrystal and single crystal Nd:YAG by advanced ceramic processing

398

Fabrication and lasing characteristics of λ=1.56 μm tunable twin-guide (TTG) DFB lasers

399

Fabrication and lasing characteristics of 0.67 µm GaInAsP/AlGaAs visible lasers prepared by liquid phase epitaxy on

400

Fabrication and Lasing Properties of a Novel Single Longitudinal Mode 1.5 μm GaInAsP/InP Distributed Reflector (DR) Laser

401

Fabrication and lasing properties of mesa substrate buried heterostructure GaInAsP/InP lasers at 1.3 µm wavelength

402

Fabrication and logic operation of oxide SFQ-circuit-components

403

Fabrication and Low Temperature Characterization of Ge (110) and (100) p-MOSFETs

404

Fabrication and Luminescent Properties of Eu³+ Doped Lanthanide Oxide Nanowires and Nanotubes by Electrospinning

405

Fabrication and Luminescent Properties of YAG:Ce Transparent Microspheres by Laser Heating

406

Fabrication and Magnetic Properties of $\\hbox {Fe}_{65}\\hbox {Co}_{35}\\hbox {-}\\hbox {B}_{2}\\hbox {O}_{3}$ Granular Films for High Frequency Application

407

Fabrication and magnetic properties of chains composed of spherical iron particles

408

Fabrication and magnetic properties of electron beam lithography patterned arrays of single crystalline Fe[001] squares

409

Fabrication and magnetic properties of electron beam lithography patterned arrays of single crystals

410

Fabrication and magnetic properties of electrospun Ti0.9V0.1O2 nanofibers

411

Fabrication and Magnetic Properties of Fe Thin Films on a Substrate Excited by SAW

412

Fabrication and magnetic properties of Fe/GaAs/Fe hybrid structures

413

Fabrication and magnetic properties of metal nanowires via AAO templates

414

Fabrication and Magnetic Properties of Nonmagnetic Ion Implanted Magnetic Recording Films for Bit-Patterned Media

415

Fabrication and Magnetic Properties of Thin Films Sputtered on the Substrate Excited by SAW

416

Fabrication and magnetic studies of (Co, Zn)-doped γ-Fe₂O₃ thin films

417

Fabrication and magnetic transition in Fe-doped Ni-P nanoarrays by using electroless plating deposition

418

Fabrication and Magnetization Reversal Processes for Co/Cu Multilayer Nanowires

419

Fabrication and Magnetoresistance of Arrays of Bismuth Nanowires

420

Fabrication and magnetorheological property of nano-sized magnetic particles

421

Fabrication and manipulation of 3D hybrid nanorobot for single cell puncture

422

Fabrication and manipulation of fluorescent carbon nanoparticles for biosensing applications

423

Fabrication and manipulation of magnetic nanowires

424

Fabrication and materials for a long range neutron-gamma monitor using straw detectors

425

Fabrication and measured performance of a first-generation microthermoelectric cooler

426

Fabrication and measurement of a monopole antenna with branch strips and slit ground for dual band WLAN applications

427

Fabrication and measurement of BPF using IPD technology

428

Fabrication and measurement of efficient, robust cesiated dispenser photocathodes

429

Fabrication and measurement of electrode components for the national institute of Standards and Technology calculable capacitor

430

Fabrication and measurement of graphene p–n junction with two top gates

431

Fabrication and measurement of high T_c superconducting microbolometers

432

Fabrication and measurement of intrinsic Josephson junctions in misaligned films of Tl₂Ba₂CaCu₂O₈

433

Fabrication and Measurement of Low Workfunction Cesiated Dispenser Photocathodes

434

Fabrication and Measurement of Low-Stress Polyimide Membrane for High-Resolution Variable Optical Attenuator

435

Fabrication and measurement of metallic single electron transistors

436

Fabrication and measurement of quarter wave plate made by holey birefringent fiber

437

Fabrication and measurement of Si-based inductors integrated in WLP

438

Fabrication and Measurement of Sidewall Gratings Integrated in Hybrid As₂S₃ -Ti:LiNbO₃ Optical Waveguides

439

Fabrication and measurement of submicron planar YBa/sub 2/Cu/sub 3/O/sub 7/ microbridge Josephson junctions

440

Fabrication and measurement of tall stacked arrays of SNS Josephson junctions

441

Fabrication and Measurement of Test Structures to Monitor Stress in SU-8 Films

442

Fabrication and Measurement of the Main Electrodes of the NMIA-BIPM Calculable Cross Capacitors

443

Fabrication and measurement of vertical split-ring resonators for light manipulation and metasurface

444

Fabrication and measurements of high aspect ratio conductive microtip array with localized ultra-micro electrode at the tip end

445

Fabrication and measurements of Nb/Al-AlOx/Nb tunnel junctions and DC SQUID

446

Fabrication and measurements of sol-gel planar and stripe waveguides in LTCC structure

447

Fabrication and measurements using ultra-tall near-field coaxial tips

448

Fabrication and mechanical behavior of a prototype for the LHC low-beta quadrupole magnets

449

Fabrication and mechanical characterization of flexible devices with sensors with magnetoresistance responses above 150%

450

Fabrication and mechanical characterization of LCVD-deposited carbon micro-springs

451

Fabrication and Mechanical Characterization of Microneedle Array for Cell Surgery

452

Fabrication and mechanical characterization of ring-shaped LTCC/HTCC finger force sensors used for performance studies in clarinet playing

453

Fabrication and mechanical performance of a mesoscale space-filling truss system

454

Fabrication and mechanical performance of the ATLAS central solenoid

455

Fabrication and mechanical properties of low-loading graphene nanosheets encapsulated on the surface of graphene nanosheets/polypropylene composites

456

Fabrication and mechanical property of carbon nanotube/metal composites

457

Fabrication and Methods for Evaluation and Circuit Utilization of Prototype Lateral Field Resonators

458

Fabrication and metrology of electromagnetically actuated microcantilever arrays for biochemical sensing

459

Fabrication and micromechanical characterization of polycrystalline diamond microcantilevers

460

Fabrication and microstructural control of high current ReBa/sub 2/Cu/sub 3/O/sub 7/ current leads (Re=Y, Nd, Sm)

461

Fabrication and microstructure evolution of preferred oriented nanotwinned copper by pulse electroplating for RDL in WLP

462

Fabrication and microwave absorption properties of hexaferrite composites in Ku-band

463

Fabrication and microwave characterisation of aluminium free HEMT devices and subsequent performance comparison against conventional AlGaAs/InGaAs based devices

464

Fabrication and microwave characterisation of multilayer circuits for MMIC applications

465

Fabrication and Microwave Characterization of 3-D Printed Transmission Lines

466

Fabrication and microwave performance of the permeable base transistor

467

Fabrication and microwave properties of Y-Ba-Cu-O and Bi-Ca-Sr-Cu-O thin films

468

Fabrication and millimeter-wave characterization of semiconductor Klystron amplifier device

469

Fabrication and mixer performance of Nb/Al double-barrier junctions

470

Fabrication and mobility characteristics of SiGe surface channel pMOSFETs with a HfO₂/TiN gate stack

471

Fabrication and mobility characteristics of ultra-thin strained Si directly on insulator (SSDOI) MOSFETs

472

Fabrication and modal analysis of ion-implanted LiNbO3 ridge optical waveguide for integrated Erbium-doped amplifiers

473

Fabrication and Mode Identification of Compact Long-Period Gratings Written by CO $_{2}$ Laser

474

Fabrication and model validation for CMUTs operated in permanent contact mode

475

Fabrication and modeling of 3-D self-assembled SOI MEMS controlled by thermal and plastic strains

476

Fabrication and modeling of a novel self-Aligned AlGaAs/GaAs heterojunction bipolar transistor with a cutoff frequency of 45 GHz

477

Fabrication and modeling of a planar magnetic structure with directly etched windings

478

Fabrication and modeling of a silicon micro calorimeter

479

Fabrication and modeling of Ag/TiO2/ITO memristor

480

Fabrication and modeling of an in-plane thermoelectric micro-generator

481

Fabrication and modeling of an SP3T RF MEMS switch

482

Fabrication and modeling of bismuth titanate-PZT ceramic transducers for high temperature applications

483

Fabrication and modeling of broadband ultrasonic transducers using partial composites

484

Fabrication and modeling of gigahertz photodetectors in heteroepitaxial Ge-on-Si using a graded buffer layer deposited by low energy plasma enhanced CVD

485

Fabrication and modeling of high-frequency PZT composite thick film membrance resonators

486

Fabrication and modeling of inversion layer ultrasonic transducers using LiNbO₃ single crystal

487

Fabrication and modeling of large-scale silicon nanowire solar cells for thin-film photovoltaics

488

Fabrication and modeling of optical interconnects using selective area growth metalorganic chemical vapor deposition

489

Fabrication and modeling of organic thin-film transistor on glass substrate

490

Fabrication and modeling of silicon-embedded high Q inductors

491

Fabrication and modelling of a prototype dual-band HgCdTe infrared detector structure

492

Fabrication and modelling of segway

493

Fabrication and morphological control of electrospun ethyl cellulose nanofibers

494

Fabrication and Nitrogen Dioxide Sensing Characteristics of PbPc Thin Film Gas Sensor

495

Fabrication and noise performance of high-power GaAs IMPATTS

496

Fabrication and numerical analysis of AlGaAs/GaAs tandem solar cells with tunnel interconnections

497

Fabrication and numerical analysis of D-shaped optical fiber polarizer coated with chromium film

498

Fabrication and numerical simulation of the permeable base transistor

499

Fabrication and operating characteristics of carbon nanotube diode

500

Fabrication and Operating Characteristics of Ion-Implanted Bubble Memory Chips for a 16M-Bit Device

501

Fabrication and Operation of a RHQT Nb₃Al Insert Coil Generating 4.5 T at 4.2 K in 15 T Back-Up Field

502

Fabrication and operation of a velocity modulation transistor

503

Fabrication and operation of an amorphous-emitter transistor

504

Fabrication and operation of CCD structure with silicon layers grown on sapphire substrates

505

Fabrication and operation of first-order GaInP/AlGaInP DFB lasers at room temperature

506

Fabrication and operation of indented angelfish bubble-domain shift register

507

Fabrication and operation of microplasma reactor array for maskless nanoscale material etching

508

Fabrication and operation of MOS tunneling cathode

509

Fabrication and operation of polyimide bimorph actuators for a ciliary motion system

510

Fabrication and operation of silicon field emission cathode arrays

511

Fabrication and operation of sub-50 nm strained-Si on Si_1-xGe_x Insulator (SGOI) CMOSFETs

512

Fabrication and Operation of the 4 MV 53 MHz RF System for the Fermilab Antiproton Source Debuncher Ring

513

Fabrication and operation of triode electron emitters as ion source for miniature mass spectrometer

514

Fabrication and optical absorption of size-tunable core-shell structured ZnO nanotube-CdTe arrays

515

Fabrication and optical characterisation of first order DFB GaInP/AlGaInP laser structures at 639 nm

516

Fabrication and optical characterisation of planar silica lens pair

517

Fabrication and optical characteristics of a hemi-paraboloidal solid immersion mirror and designing of an optical head with the mirror

518

Fabrication and optical characteristics of polycrystalline Nd:YAG ceramics for solid- state laser

519

Fabrication and optical characterization of a flexible colloidal quantum dot laser

520

Fabrication and Optical Characterization of Bowtie Antennas

521

Fabrication and Optical Characterization of Ge33As12Se55 (AMTIR-1) Thin Film Waveguides

522

Fabrication and optical characterization of high-Q guided mode resonances in a graphite-lattice photonic crystal slab

523

Fabrication and Optical Characterization of Photonic Crystal Quantum Cascade Lasers at Terahertz Frequencies

524

Fabrication and Optical Characterization of Silica Microspheres Having Europium Ions

525

Fabrication and Optical Characterization of Strain Variable PDMS Biconical Optical Fiber Taper

526

Fabrication and optical characterization of template-constructed thin films with chiral nanostructure

527

Fabrication and optical characterization of thin film composites for coplanar phase shifters

528

Fabrication and optical characterization of ultra-thin anodic aluminum oxide nanoporous templates

529

Fabrication and optical characterization, of 2-dimensional Si₃N₄ waveguides

530

Fabrication and optical evaluation of 1D and 2D photonic metamaterial crystal

531

Fabrication and optical measurements of nanoscale meta-materials: terahertz and beyond

532

Fabrication and optical properties of aligned silicon nanowire arrays realized with thin silver film

533

Fabrication and optical properties of erbium-doped silicon-rich oxide planar waveguides

534

Fabrication and optical properties of GaAs/InGaAs/GaAs core-multishell nanowire quantum well heterostructure

535

Fabrication and optical properties of linear-corearray multicore fiber

536

Fabrication and optical properties of monomode semiconductor doped fibre

537

Fabrication and optical properties of neodymium-, praseodymium- and erbium-chelates-doped plastic optical fibres

538

Fabrication and Optical Properties of Pb(Mg1/3Nb2/3)O3-PbTiO3 Thin Films on Si Substrates by PLD Method

539

Fabrication and optical properties of Pb(Mg_1/3Nb_2/3)O₃-PbTiO₃ thin films on Si substrates using the PLD method

540

Fabrication and optical properties of selected coreshell structures with nanocrystalline rare-earth doped phosphors coated with SiO2 submicron particles

541

Fabrication and optical properties of self assembled InGaAs quantum dots embedded in microcavities

542

Fabrication and optical properties of size-controlled Ag nanodot array via nanoporous alumina mask

543

Fabrication and Optical Properties of Three-Dimensional Magnetophotonic Heterostructures

544

Fabrication and optical properties of ultrathin ferromagnet/superconductor metallic bilayers

545

Fabrication and optical property of two-dimensional infrared photonic crystals by deep reactive ion etching in Si

546

Fabrication and optical stability from silanized gold nanorods as transducers of near infrared light

547

Fabrication and optical-switching results of the double-gate static-induction thyristor with the first planar-gate and the second buried-gate structure

548

Fabrication and optical-switching results on the integrated light-triggered and quenched static induction thyristor

549

Fabrication and optimal strain sensor placement in an instrumented disk drive suspension for vibration suppression

550

Fabrication and optimisation of the erbium distribution in silica based doped fibres

551

Fabrication and Optimisation of Waveguides in Lithium Niobate by Differential Etching Following Spatially Selective Domain Inversion

552

Fabrication and optimization for waveguides in sub-micron scale hyperuniform disordered photonic bandgap materials

553

Fabrication and optimization of Al-doped zinc oxide layer for application in radial p-n junction silicon solar cells

554

Fabrication and optimization of planar defects embedded between two silica opals

555

Fabrication and optimization of radar absorbing structures composed of glass/carbon fibers/epoxy laminate composites filled with carbon nanotubes

556

Fabrication and optimization of su-8 microring resonators

557

Fabrication and Optimization of the 45Â° Micro-mirrors for 3-D Optical Interconnections

558

Fabrication and optimization of triode structure CNT-FEDs

559

Fabrication and optimization of wafer level SAW filter package using laser via drilling

560

Fabrication and opto-electric properties of silicon based heterojunction SIS cells

561

Fabrication and output characteristics up to 3.0 GHz of meander type double layer thin milm transformer

562

Fabrication and package of microfluidic dielectrophoretic chip for trapping two particles

563

Fabrication and Packaging of 40-Gb/s AlGaInAs Multiple-Quantum-Well Electroabsorption Modulated Lasers Based on Identical Epitaxial Layer Scheme

564

Fabrication and Packaging of a Dual Sensing Electrochemical Biotransducer for Glucose and Lactate Useful in Intramuscular Physiologic Status Monitoring

565

Fabrication and packaging of a fully implantable biosensor array

566

Fabrication and packaging of a miniature sensor array for harsh environments

567

Fabrication and packaging of a vertical-structured UV LED device by laser lift-off of Sapphire

568

Fabrication and packaging of high-density multichip interconnect (HDMI) substrates

569

Fabrication and packaging of inertia micro-switch using metal-electroplating technology

570

Fabrication and packaging of microbump interconnections for 3D TSV

571

Fabrication and Packaging of Nanoporous Membrane Chips for Label-Free Ion-Channel Transducer Based Biosensor

572

Fabrication and packaging process of silicon resonators capable of the integration of LSI for application of timing device

573

Fabrication and parametric study of wafer-level multiple-copper-column interconnect

574

Fabrication and Patterning of Magnetic Polymer Micropillar Structures Using a Dry-Nanoparticle Embedding Technique

575

Fabrication and performance analysis of an amorphous silicon-based thermal IR detector

576

Fabrication and performance analysis of electrostatic micro droplet ejector

577

Fabrication and performance characteristics of InGaAs lasers emitting near 980 nm

578

Fabrication and performance characteristics of InGaAsP ridge-guide distributed-feedback multiquantum-well lasers

579

Fabrication and performance characteristics of optical fiber gratings for sensing applications

580

Fabrication And Performance Charateristics Of Optoelectronic Receiver And Transmitter Circuits

581

Fabrication and performance evaluation of micromachined cavity-backed co-planar waveguide to rectangular waveguide transition at Y-band frequencies

582

Fabrication and performance of "Muffin-tin" microwave cavities for accelerator use

583

Fabrication and Performance of $\\hbox {TiO}_{2}$ -Ceramic-Based Metamaterials for Terahertz Frequency Range

584

Fabrication and performance of 0.1-μm gate-length AlGaAs/GaAs HEMTs with unity current gain cutoff frequency in excess of 110 GHz

585

Fabrication and Performance of 0.25- $\\mu$ m Gate Length Depletion-Mode GaAs-Channel MOSFETs With Self-Aligned InAlP Native Oxide Gate Dielectric

586

Fabrication and performance of 1.5μm GaInAsP travelling-wave laser amplifiers with angled facets

587

Fabrication and performance of 40-60 MHz annular arrays

588

Fabrication and performance of a 10 MHz annular array based on PMN-PT single crystal for medical imaging

589

Fabrication and Performance of a 40-MHz Linear Array Based on a 1-3 Composite with Geometric Elevation Focusing

590

Fabrication and performance of a fully integrated mu -pirani pressure gauge with digital readout

591

Fabrication and performance of a micro 50-MHz IVUS Transducer based on a 1-3 composite with geometric focusing

592

Fabrication and performance of a miniaturized 64-element high-frequency endoscopic phased array

593

Fabrication and performance of a miniaturized 64-element high-frequency endoscopic phased array

594

Fabrication and performance of a new high-gradient trim quadrupole for the Fermilab luminosity upgrade

595

Fabrication and performance of a novel suspended RF spiral inductor

596

Fabrication and performance of a novel ultra-low capacitance MSM photodetector for high-speed OEIC receiver applications

597

Fabrication and performance of AlGaAs-GaAs distributed Bragg reflector lasers and distributed feedback lasers utilizing first-order diffraction gratings formed by a periodic groove structure

598

Fabrication and performance of all NbN Josephson junction circuits

599

Fabrication and performance of all refractory josephson logic circuits for 1 Kbit SFQ memory

600

Fabrication and performance of an InP/InGaAsP monolithic 12 Ã\x97 12-element matrixed LED array

601

Fabrication and performance of an oxide thermoelectric power generator

602

Fabrication and Performance of Au-Free AlGaN/GaN-on-Silicon Power Devices With ${\\rm Al}_{2}{\\rm O}_{3}$ and

Fabrication and performance of broadband back to back waveguide to suspended stripline transition on quartz for D-band

604

Fabrication and Performance of Color Filter Arrays for Solid-State Imagers

605

Fabrication and performance of color filter arrays for solid-state imagers

606

Fabrication and Performance of Columnar CsI(Tl) Scintillation Films With Single Preferred Orientation

607

Fabrication and Performance of CsI(Tl) Scintillation Films With Pixel-Like Columnar-Matrix Structure

608

Fabrication and Performance of Digital and Analogue Poly-Si TFT Circuits on Glass

609

Fabrication and performance of endoscopic ultrasound radial arrays based on PMN-PT single crystal/epoxy 1-3 composite

610

Fabrication and performance of ferrite phase shifters for millimeter frequencies

611

Fabrication and Performance of GaAs Double Camel-Like Gate FET with Extremely High Gate Turn-on Voltage

612

Fabrication and performance of GaAs MESFETs with graded channel doping using focused ion-beam implantation

613

Fabrication and performance of GaAs millimeter-wave impatts

614

Fabrication and performance of GaAs p⁺n junction and Schottky barrier millimeter IMPATT´s

615

Fabrication and performance of GaN-based two dimensional photonic crystal surface emitting lasers

616

Fabrication and performance of high T_c two hole bulk and single hole thick film RF SQUIDs at 77 K

617

Fabrication and performance of high moment laminated FeAlN thin film inductive recording heads

618

Fabrication and performance of high-density, matrix-addressable green and ultraviolet micro-LED arrays

619

Fabrication and performance of high-frequency composite transducers with triangular-pillar geometry

620

Fabrication and performance of InAs-based heterojunction bipolar transistors

621

Fabrication and performance of InGaAlAs MQW distributed Bragg reflector lasers with grooved surface gratings formed by reactive beam etching

622

Fabrication and performance of InP MISFET

623

Fabrication and performance of InP-based heterostructure barrier varactors in a 250-GHz waveguide tripler

624

Fabrication and performance of in-situ processed Nb3Sn tape and multistrand wire

625

Fabrication and performance of ion implanted I²L devices

626

Fabrication and performance of low loss optical components made by ion exchange in glass

627

Fabrication and performance of mesa interconnect

628

Fabrication and performance of Microplasma Reactor for maskless scanning plasma etching

629

Fabrication and performance of multifilamentary Nb₃Sn wires by the cable-in-tube approach

630

Fabrication and performance of Nb₃Sn Rutherford-type cable with Cu added as a separate component

631

Fabrication and performance of NbN thin film planar squids

632

Fabrication and performance of offset-mask charge-coupled devices

633

Fabrication and performance of offset-mask charge-coupled devices

634

Fabrication and performance of packaged fibre gratings for telecommunications

635

Fabrication and performance of parallel-addressed InGaN micro-LED arrays

636

Fabrication and performance of pentacene thin-film transistors with SiO2/PMMA bilayer dielectric

637

Fabrication and Performance of Piezoelectric MEMS Tunable Capacitors Constructed with AlN Bimorph Structure

638

Fabrication and performance of planar Schottky diodes with T-gate-like anodes in 200-GHz subharmonically pumped waveguide mixers

639

Fabrication and performance of selective HSG storage cells for 256 Mb and 1 Gb DRAM applications

640

Fabrication and performance of selectively oxidized vertical-cavity lasers

641

Fabrication and performance of separately-biasable antiparallel-pair "T-anode" mixer diodes employing a compact multiple-layer integrated bias circuit at 210 GHz

642

Fabrication and Performance of Silicon-Embedded Permanent-Magnet Microgenerators

643

Fabrication and Performance of Solution-Based Micropatterned DNA Functionalized Carbon Nanotube Network as Humidity Sensors

644

Fabrication and performance of strip-centered microminiature coaxial cable

645

Fabrication and performance of submicron silicon MESFET

646

Fabrication and performance of superconducting RF cavities for the cornell ERL injector

647

Fabrication and performance of the light switchable microelectrode array for retinal prosthesis

648

Fabrication and performance of tree-branch microchannels in silicon carbide for direct cooling of high-power electronics applications

649

Fabrication and performance of two-dimensional matrix addressable arrays of integrated vertical-cavity lasers and resonant cavity photodetectors

650

Fabrication and performance of ZnO piezoelectric cantilever for vibration energy harvesting

651

Fabrication and performance optimization of an AA size electromagnetic energy harvester using magnetic spring

652

Fabrication and Performance Optimization of the Microplasma Reactor with Composite Dielectrics

653

Fabrication and performance studies of multilayer polymer/metal interconnect structures for packaging applications

654

Fabrication and performance test of a compact-type magasonic waveguide for nano-particle cleaning

655

Fabrication and performance testing of a steady thermocapillary pump with no moving parts

656

Fabrication and Performance Testing of Disposable Micropump Suitable for Microfluidic Chip

657

Fabrication and performances analysis of ball lenses

658

Fabrication and performances of a double-layer organic electroluminescent device using a novel starburst molecule, 1,3,5-tris[N-(4-diphenylaminophenyl)phenylamino]benzene, as a hole-transport material and tris(8-quinolinolato)aluminum as an emitting mater

659

Fabrication and performances of AlGaAs-GaAs wavelength distributed feedback lasers and distributed Bragg reflector lasers utilizing first-order diffraction grating formed by periodic groove structure

660

Fabrication and performances of delta-doped Si n-MESFET grown by MBE

661

Fabrication and photochromic properties of Ag/Ag⁺- codoped germano-silicate glass fiber

662

FABRICATION AND PHOTOCONDUCTIVE SWITCHING PERFORMANCE OF HIGH GAIN Si DOPED Cu COMPENSATED GaAs

663

Fabrication and photoelectrochemical properties of nanoporous WO3 film

664

Fabrication and photoluminescence characteristics of ER³⁺-doped optical fibre sensitised by silicon

665

Fabrication and photoluminescence characteristics of germano-silicate optical fiber incorporated with Germanium particles

666

Fabrication and photoluminescence of Er-doped Al2O3 thin films deposited by sol-gel method

667

Fabrication and photoluminescence property of the PbS-doped silica optical fiber

668

Fabrication and photoluminescence studies of GaN nanopillars

669

Fabrication and photoluminescent properties of ZnO/ZnMgO quantum structure nanorods

670

Fabrication and photo-voltaic measurements of a 210-nm-period GaN-based surface nano-structure photodetector

671

Fabrication and Photovoltaic Properties of Dye-Sensitized Solar Cells Modified by Graphene Oxide and Magnetic Bead

672

Fabrication and physics of microcavity quantum wire lasers

673

Fabrication and piezoelectric properties of (K0.5Na0.5)NbO3-based ceramics doped with Bi-perovskites

674

Fabrication and piezoelectric properties of PZT ceramics prepared by partial oxalate method

675

Fabrication and piezoelectricity of fluoropolymer films with patterned structure

676

Fabrication and polarising characteristics of D-shaped optical fibre coated with chromium film

677

Fabrication and post-annealing studies of ultrasonically spray pyrolysed Y-Ba-Cu-O films

678

Fabrication and power generation characteristics of p-NaCo2O4/n-ZnO oxide thermoelectric modules

679

Fabrication and Practical Considerations of a Flyback Transformer for Use in High Pulsed-Power Applications

680

Fabrication and prediction techniques for FGM (functionally graded materials) application to solid insulators

681

Fabrication and Preliminary Characterization of a Parabolic Coupler for Photonic Crystal Waveguides

682

Fabrication and Preliminary Results for LiGA Fabricated Nickel Micro Gas Chromatograph Columns

683

Fabrication and Preliminary Test Results of A MEMS Cell Stimulator for Stem Cell Research

684

Fabrication and preliminary test results of BICEP (Background Imaging of Cosmic Extragalactic Polarization) bolometer

685

Fabrication and process characterization of atom transistor chips

686

Fabrication and program/erase characteristics of 30-nm SONOS nonvolatile memory devices

687

Fabrication and Properties in Ag/Bi2223 Tapes With Ca-Cu-O as Interfilamentary Resistive Barriers

688

Fabrication and Properties of $\\hbox {Pt}/\\hbox {Bi}_{3.15}\\hbox {Nd}_{0.85} \\hbox {Ti}_{3}\\hbox {O}_{12}/break\\hbox {HfO}_{2}/\\hbox {Si}$ Structure for Ferroelectric D

689

Fabrication and properties of 1 µm²edge junctions

690

Fabrication and properties of 3D flexible parylene-based microelectrode array with silicon tips

691

Fabrication and properties of 3-D polysilicon photonic lattices in the infrared

692

Fabrication and properties of a glass-lens, static-concentrator mini-module

693

Fabrication and properties of ac-dc superconducting rectifier

694

Fabrication and properties of an OLED-based gas sensor with ZnPc sensing film

695

Fabrication and properties of an ultrafast NbN hot-electron single-photon detector

696

Fabrication and properties of Bi/sub 2/Sr/sub 2/CaCu/sub 2/O/sub y/ multilayer superconducting tapes and coils

697

Fabrication and properties of Bi₂SiO₅ thin films for MFIS structures

698

Fabrication and Properties of Bi2212 Rutherford Superconducting Cable

699

Fabrication and properties of Bi-2223 tapes

700

Fabrication and properties of Bi-Sr-Ca-Cu-O thin films made using pulsed laser deposition

701

Fabrication and properties of chalcogenide glasses for planar waveguides

702

Fabrication and properties of chirped fibre gratings with reflection bandwidths exceeding 50 nm and narrow bandpass fibre grating filters

703

Fabrication and properties of CoPt patterned media with perpendicular magnetic anisotropy

704

Fabrication and properties of DC-sputtered Tl-1223 superconducting thin films

705

Fabrication and Properties of Double Layer Perpendicular Rigid Disks

706

Fabrication and properties of ESFI-SOS-MOST´s suitable for both low-voltage and low-power circuits

707

Fabrication and properties of Fe/Fe oxide and Co/Co oxide films

708

Fabrication and properties of fine scale 1-3 piezocomposites by modified lost mold method

709

Fabrication and properties of high J/sub c/ multifilamentary (Bi,Pb)-2223 tapes with Ag-alloy sheath

710

Fabrication and properties of high Jclead—alloy Josephson junctions

711

Fabrication and properties of high performance polyimide nanofibrous films by electrospinning

712

Fabrication and properties of high TcSNS microbridge series arrays

713

Fabrication and Properties of High- $T_{\\rm c}$ YBCO Josephson Junction and SQUID With Variable Thickness Bridges by Focused Ion Beam

714

Fabrication and properties of high-T/sub c/ tapes and coils made from silver-clad Bi-2223 superconductors

715

Fabrication and properties of HTS diffusion type weak links

716

Fabrication and properties of large core, high NA, high Nd³⁺ content multimode optical fibres for temperature sensor applications

717

Fabrication and properties of lead-free piezoelectric buzzers made from K0.5Na0.5NbO3-based ceramics

718

Fabrication and properties of lead-germanate glasses for high nonlinearity fibre applications

719

Fabrication and Properties of Longitudinal and Transverse Current Rectifier Devices Based on Superconducting Films With Arrays of Nanodefects

720

Fabrication and properties of microforged ferromagnetic nanoflakes

721

Fabrication and Properties of Microforged Ferromagnetic Nanoflakes

722

Fabrication and properties of microwave lithium ferrites

723

Fabrication and Properties of Middle Frequency Filters by Using [Bi0.5(Na1-x-yKxLiy)0.5]TiO3 Lead-free Piezoelectric Ceramics

724

Fabrication and Properties of Multiferroic Nanocomposite Films

725

Fabrication and properties of multifilament Nb3Sn conductors

726

Fabrication and properties of multiple vertically stacked Josephson tunnel junctions

727

Fabrication and properties of Nano h-BN Coated SiC/ Epoxy Composites

728

Fabrication and properties of nano scale anti-static film by multilayered surface treatment

729

Fabrication and properties of nano-Si quantum dot flash memory

730

Fabrication and properties of Nb/MgO/Bi/sub 2/Sr/sub 2/CaCu/sub 2/O/sub x/ tunnel junctions using crystalline and amorphous MgO films grown by the MBE method

731

Fabrication and properties of Nb3Sn tapes by the "Bronze process" application to superconducting power transmission lines

732

Fabrication and properties of n-channel SiGe/Si modulation doped field-effect transistors grown by MBE

733

Fabrication and properties of Nd-Ba-Cu-O/Pr-Ba-Cu-O/Nd-Ba-Cu-O ramp-edge junctions

734

Fabrication and properties of optoelectronic SiGeSn alloys integrated on silicon substrates

735

Fabrication and properties of PIT Nb-Al and Nb-Sn based superconductors

736

Fabrication and properties of polymer optical fibers containing Nd-chelate

737

Fabrication and properties of PVDF/BaTiO3 nanocomposites for electronic applications

738

Fabrication and properties of PZT and PMN-PT piezoelectric fibers and piezoelectric fiber composites

739

Fabrication and properties of self-aligned double-gate poly-Si TFT

740

Fabrication and properties of SiC/Cu composites for electronic packaging

741

Fabrication and properties of some Ag-alloy sheathed Bi-2223 tapes

742

Fabrication and properties of the flexible a-Si:H solar cells on plastic films using roll-to-roll method

743

Fabrication and Properties of Translucent SrI $_2$ and Eu:SrI $_2$ Scintillator Ceramics

744

Fabrication and properties of very thin proximity Josephson junctions

745

Fabrication and properties of YBa/sub 2/Cu/sub 3/O/sub 7//RE/sub 1-x/MnO/sub 3-y/ multilayers

746

Fabrication and properties of YBCO tunnel junctions by ion beam sputtering

747

Fabrication and property of titanium dioxide thin film using sol-gel method and CO laser annealing

748

Fabrication and prototype testing of a strain-tolerant Bi-2212 cable

749

Fabrication and PTC Properties of Lead-Free Element-Modified Barium Titanate Semiconducting Ceramics with Tc130Â°C

750

Fabrication and quality factor control of a microelectromechanical system resonator with linear differential drive

751

Fabrication and quantitative comparison of quasi-optical terahertz rectifiers with integrated antennas

752

Fabrication and Recording of Bit Patterned Media Prepared by Rotary Stage Electron Beam Lithography

753

Fabrication and Recording Study of All-Metal Dual-Spin-Valve CPP Read Heads

754

Fabrication and Recording Study of All-Metal Dual-Spin-Valve CPP Read Heads

755

Fabrication and release of SU-8 structures on soft substrate

756

Fabrication and reliability evaluation of a novel package-on-package (PoP) structure based on organic substrate

757

Fabrication and reliability investigation of copper pillar and tapered through silicon via (TSV) for direct bonding in 3D integration

758

Fabrication and Reliability of Rigid-Flexible Optical Electrical Printed Circuit Board for Mobile Devices

759

Fabrication and Reliability of Thin Film Crossovers and Terminations

760

Fabrication and reliability test of rigid-flexible optical printed circuit boards for mobile devices

761

Fabrication and repair of ion source components in the 80 keV neutral beam lines for DIII-D

762

Fabrication and replication of continuous-relief DOEs

763

Fabrication and research of flexible arrayed glucose biosensor combined with the magnetic beads

764

Fabrication and resonance wavelengths of long-period gratings written in a pure-silica photonic crystal fiber by the glass structure change

765

Fabrication and Response of Laser-Printed Cavity-Sealing Membranes

766

Fabrication and responsivity spectra of p-Ge/i-Si/n-Si near-infrared photodiodes

767

Fabrication and RF performance of InAs nanowire FET

768

Fabrication and Room-Temperature Single-Charging Behavior of Self-Aligned Single-Dot Memory Devices

769

Fabrication and scanning-angle temperature dependence of metal-based, optical resonant scanners with PZT actuation

770

Fabrication and self-assembly of movable microstructures embedding cells with concentration control inside microfluidic devices

771

Fabrication and signal readout of the Si-based delay-line radiation detector

772

Fabrication and simulation of antireflective nanostructures on c-Si solar cells

773

Fabrication and simulation of copper spiral on-chip inductors for RF wireless communication

774

Fabrication and Simulation of DLC Field Emitter Triode

775

Fabrication and simulation of Ga/sub 0.51/In/sub 0.49/P/In/sub x/Ga/sub 1-x/As doped-channel FETs and MMIC amplifiers grown by GSMBE

776

Fabrication and simulation of high-power high-speed Ga/sub 0.51/In/sub 0.49/P/GaAs airbridge gate MISFET´s grown by GSMBE

777

Fabrication and simulation of implantable glucose Bio Fuel Cell with gold catalyst

778

Fabrication and Simulation of Implantable Glucose Fuel Cell

779

Fabrication and simulation of multimode symmetrical and asymmetrical Y-junction optical power splitters

780

Fabrication and simulation of PDMS assisted CO2 laser ablation

781

Fabrication and simulation of polyfluorene-based organic light-emitting diodes

782

Fabrication and simulation of silicon structures with high aspect ratio for field emission devices

783

Fabrication and Some Magnetic Properties of Amorphous Co-Zr-/(Au,Ag,Pt) Films

784

Fabrication and some measurement of a digital variable optical attenuator

785

Fabrication and space-qualifying a lightweight corrugated horn with low sidelobes for global-Earth coverage

786

Fabrication and spectral response analysis of AIGaAs/GaAs and InP/lnGaAs HPTs with transparent ITO e

787

Fabrication and spectroscopic properties of glass-based erbium activated micro-nano photonic structures

788

Fabrication and spectroscopy of Cs vapor cells with buffer gas for miniature atomic clock

789

Fabrication and stability of fiber Bragg gratings for WDM applications using a 266 nm CW-laser

790

Fabrication and Static Magnetic Properties of Novel One- and Two-Dimensional Bi-Component Magnonic Crystals

791

Fabrication and structural characterization of nearly lattice-matched p-ZnSnAs2/n-InP heterojunctions

792

Fabrication and structure characterization of Te butterfly nanostructures

793

Fabrication and Structure of Co/Cu Artificial Superlattices

794

Fabrication and studies of barrier layer capacitors

795

Fabrication and study of bulk and thin film CuGa_1-xIn _xSe₂ and Cu(Ga_1-xIn)₃Se₅ photovoltaic materials obtained by the close-spaced vapour transport technique (CSVT)

796

Fabrication and study of large area QHE devices based on epitaxial graphene

797

Fabrication and Study of Large-Area QHE Devices Based on Epitaxial Graphene

798

Fabrication and study of low temperature polycrystalline silicon TFT technology applied to step doping LIGBT

799

Fabrication and study of Ni₇₅Fe₂₅-SiO₂ granular films for high frequency application

800

Fabrication and study of Ni₇₅Fe₂₅-SiO₂ granular films for high frequency application

801

Fabrication and study on anode of dye-Sensitized solar cells

802

Fabrication and successful in-vivo implantation of a flexible neural implant with a hybrid polyimide-silicon design

803

Fabrication and Superconducting Properties of ${\\rm MgB}_{2}$ Doped With Polysiloxane Based Copolymers

804

Fabrication and Superconducting Properties of Aluminum Doped (Nd,Sm,Gd)–Ba–Cu–O Filaments

805

Fabrication and superconducting properties of ex-situ PIT processed A15 type tape conductors

806

Fabrication and Superconducting Properties of Highly Dense ${\\rm MgB}_{2}$ Bulk Using a Two-Step Sintering Method

807

Fabrication and Superconducting Properties of Rod‐In‐Tube Multifilamentary Nb₃Al Wire With Rapid Heating and Quenching Heat‐Treatment

808

Fabrication and Superconducting Properties of the Bronze-Processed $mbox{Nb}_{3}mbox{Sn}$ Multifilamentary Wire Using Cu–Sn–Zn Alloy Matrix

809

Fabrication and superconducting transport properties of bicrystal grain boundary Josephson junctions on different substrates

810

Fabrication and surface functionalization of single TiO2 nanotubes devices for bio-chemical sensors applications

811

Fabrication and surface modification of hydroxyapatite coatings

812

Fabrication and surface modification process for micro gas bearing

813

Fabrication and surface-enhanced Raman scattering properties of gold nanostructures

814

Fabrication and targeted particle delivery using microrobots

815

Fabrication and Temperature Characteristics of Thermal Regenerated Fiber Bragg Grating

816

Fabrication and terahertz response of “split-tube” arrays

817

Fabrication and Test of 90-mm $\\hbox {Nb}_{3}\\hbox {Sn}$ Quadrupole Coil Impregnated With MATRIMID—Bismaleimide Based Material

818

Fabrication and Test of 90-mm $\\hbox {Nb}_{3}\\hbox {Sn}$ Quadrupole Model Based on Dipole-Type Collar

819

Fabrication and Test of a ${\\rm Nb}_{3}{\\rm Sn}$ Model Magnet With Ceramic Insulation for the Next Generation Undulator of the LHC

820

Fabrication and test of a 10 MW, L-band, annular beam klystron

821

Fabrication and Test of a 3.7 m Long Support Structure for the LARP ${\\hbox {Nb}}_{3}{\\hbox {Sn}}$ Quadrupole Magnet LQS01

822

Fabrication and test of a 3MJ SMES magnet

823

Fabrication and test of a 4 kJ Bi-2223 pulse coil for SMES

824

Fabrication and Test of a 40 T Long-Pulse Magnet Driven by Battery Bank

825

Fabrication and Test of a Cryocooler Directly Cooled NbTi Superconducting Magnet

826

Fabrication and test of a filling station for micro/miniature devices

827

Fabrication and test of a forced cooled Nb3Sn superconducting coil

828

Fabrication and test of a hermetic miniature implant package with 360 electrical feedthroughs

829

Fabrication and test of a high power s-band metamaterial backward-wave oscillator

830

Fabrication and test of a LHC NbTi dipole model magnet with a split collar system

831

Fabrication and test of a racetrack magnet using pre-reacted Nb₃Sn cable

832

Fabrication and test of a submicroliter-level thermopneumatic micropump for transdermal drug delivery

833

Fabrication and test of a superconducting coil for SMES systems

834

Fabrication and test of a superconducting generator with ring windings

835

Fabrication and Test of an 8-T Superconducting Split Magnet System With Large Crossing Warm Bore

836

Fabrication and test of an efficient photovoltaic cell for laser optical power transmission

837

Fabrication and test of an electric spindle integrated with an electromagnetic balancer

838

Fabrication and test of an HTS magnet consisted of BSCCO pancake windings

839

Fabrication and test of an integrated optical magic T on a glass substrate

840

Fabrication and test of arrays of langasite microbalances

841

Fabrication and test of force-balanced-coil type air-core superconducting transformer using parallel conductor

842

Fabrication and test of gamma-type Stirling engine

843

Fabrication and test of high power couplers for superconducting accelerators

844

Fabrication and test of hydraulic jacks for the application to divertor support system of Fusion Experimental Reactor

845

Fabrication and test of implantable thin-film electrodes for stimulation and recording of biological signals

846

Fabrication and Test of Integrated Micro-Scale Vibration Based Electromagnetic Generator

847

Fabrication and Test of LARP Technological Quadrupole Models of TQC Series

848

Fabrication and Test of MEMS/NEMS based Polyimide Integrated Humidity, Temperature and Pressure Sensor

849

Fabrication and test of Nb₃Sn racetrack coils at high field

850

Fabrication and test of pixelated CZT detectors with different pixel pitches and thicknesses

851

Fabrication and test of prototype ring magnets for the ALS

852

Fabrication and test of square prism shaped dye micro laser based on photoresist molding process

853

Fabrication and test of superconducting air-core autotransformer

854

Fabrication and test of superconducting generator with ring windings

855

Fabrication and test of terahertz extended interaction klystrons

856

Fabrication and Test of the Drift Tubes for PEFP 20MeV DTL

857

Fabrication and test of the first normal-conducting crossbar H-type accelerating cavity at Fermilab for HINS

858

Fabrication and test of the LDX levitation coil

859

Fabrication and test of the model coil for a SMES

860

Fabrication and test of the planar microcoil for NMR spectroscopy of samples in nL level

861

Fabrication and Test of TQS01—A 90 mm Nb₃Sn Quadrupole Magnet for LARP

862

Fabrication and test results for Rutherford-type cables made from BSCCO strands

863

Fabrication and test results of a conical acoustic lens

864

Fabrication and test results of a conical acoustic lens

865

Fabrication and test results of a high field, Nb₃Sn superconducting racetrack dipole magnet

866

Fabrication and test results of a Nb₃Sn superconducting racetrack dipole magnet

867

Fabrication and test results of a twin-aperture superconducting dipole model magnet for LHC

868

Fabrication and testing of 3500V/15A SiC JFET based power module for high-voltage, high-frequency applications

869

Fabrication and testing of 980nm high-power VCSEL with AlN film passivation layer

870

Fabrication and testing of a 30 mm and 90 mm laminated, high L´ railgun designed and built at CEM-UT

871

Fabrication and Testing of a 600-kJ Pulsed Power System

872

Fabrication and Testing of a Combined Superconducting Magnet for the TESLA Test Facility

873

Fabrication and testing of a flat polymer micro heat pipe

874

Fabrication and testing of a high field dipole mechanical model

875

Fabrication and testing of a high resolution extensometer based on resonant MEMS strain sensors

876

Fabrication and Testing of a High-Speed Microscale Turbocharger

877

Fabrication and testing of a large area, high density, parylene MEMS µECoG array

878

Fabrication and testing of a MEMS based earth sensor

879

Fabrication and testing of a micro superconducting actuator using the Meissner effect

880

Fabrication and testing of a micromachined shear sensor

881

Fabrication and testing of a microstrip phase shifter using micromachined reconfigurable ground plane

882

Fabrication and Testing of a Model Quadrupole Magnet for Linear Accelerators

883

Fabrication and testing of a nickel-coated single-mode fibre magnetometer

884

Fabrication and testing of a novel all-diamond neural probe for chemical detection and electrical sensing applications

885

Fabrication and testing of a novel silicon probe for micromachined surface profilers

886

Fabrication and testing of a photonic ethanol biosensor

887

Fabrication and Testing of a PZT Strain Sensor for Soil Applications

888

Fabrication and Testing of a Small Pump Composed of a Magnet and an Elastic Plate

889

Fabrication and testing of a small pump composed of a magnet and an elastic plate

890

Fabrication and Testing of a TMMF S2030 Based Micro Fluidic Device for Single Cell Analysis

891

Fabrication and Testing of a TSV-Enabled Si Interposer With Cu- and Polymer-Based Multilevel Metallization

892

Fabrication and Testing of a Wafer-Level Vacuum Package for MEMS Device

893

Fabrication and testing of a w-band sheet beam extended interaction klystron (EIK)

894

Fabrication and Testing of a W-band Sheet Beam Klystron

895

Fabrication and testing of AMOEBA: an opto-electronic switch for multiprocessor networking

896

Fabrication and testing of an ionic electrospray propulsion system with a porous metal tip array

897

Fabrication and testing of beam supported AlN FBARs

898

Fabrication and testing of beta"-alumina electrolyte assemblies

899

Fabrication and testing of bulk micromachined silicon carbide piezoresistive pressure sensors for high temperature applications

900

Fabrication and testing of channel-drop filters at millimeter waves

901

Fabrication and testing of convex conic aspheric surface

902

Fabrication and testing of CVD diamond single-material MEMS resonators with piezoresistive detection

903

Fabrication and testing of hemispherical MEMS wineglass resonators

904

Fabrication and testing of integrated ferroelectric capacitors [non-volatile memories]

905

Fabrication and testing of ISFET based pH sensor for microliter scale solution targets

906

Fabrication and testing of large-area flexible electronics for displays and sensor arrays

907

Fabrication and testing of linear electric generator for use with a free-piston engine

908

Fabrication and testing of memristive devices

909

Fabrication and testing of micromachined silicon carbide and nickel fuel atomizers for gas turbine engines

910

Fabrication and Testing of Nano-Photonic Quantum Dot Waveguides

911

Fabrication and testing of pentacene thin-film transistors that use water-dispersible polyaniline electrodes

912

Fabrication and testing of piezoelectric hybrid paper for MEMS applications

913

Fabrication and testing of porous Ti microneedles for drug delivery

914

Fabrication and Testing of Racetrack-Shaped Double-Pancake Coil for Stator Windings of Induction-Synchronous Motor

915

Fabrication and testing of RF-MEMS switches using PCB techniques

916

Fabrication and testing of Rutherford-type cables for react and wind accelerator magnets

917

Fabrication and testing of single crystalline 3C-SiC devices using a novel SiC-on-insulator substrate

918

Fabrication and Testing of Single Photon Avalanche Detectors in the TSMC 0.18μm CMOS Technology

919

Fabrication and testing of sintered wires reservoir cathodes at Semicon Associates

920

Fabrication and testing of smart tongue devices for liquid sensing

921

Fabrication and testing of solution-processed carbon nanotube thin film transistor

922

Fabrication and testing of surface micromachined polycrystalline SiC micromotors

923

Fabrication and testing of surface micromachined silicon carbide micromotors

924

Fabrication and testing of the 0.650 THz helical BWO

925

Fabrication and testing of the 3-m diameter superconducting solenoid and refrigeration system for the Fermilab Collider Detector

926

Fabrication and testing of the COMWIN vest antenna

927

Fabrication and Testing of the Magnet System for SuSI Superconducting Source for Ions

928

Fabrication and Testing of the SRF Cavities for the CEBAF 12 GEv Upgrade Prototype Cryomodule Renascence

929

Fabrication and testing of thermoelectric thin film devices

930

Fabrication and testing of thin silicon interposers with multilevel frontside and backside metallization and Cu-filled TSVs

931

Fabrication and testing of three-dimensional stages providing displacement of up to 8 μm

932

Fabrication and testing of vertical metal wedge devices with well defined gate to emitter separation

933

Fabrication and testing of vertically-actuated polycrystalline SiC micromechanical resonators for MHz frequency applications

934

Fabrication and Tests of a 1 MJ HTS Magnet for SMES

935

Fabrication and tests of a three-dimensional microsupercapacitor using SU-8 photoresist as the separator

936

Fabrication and tests of prototype quadrupole magnets for the storage ring of the Advanced Photon Source

937

Fabrication and the modeling of large diameter fuel capsules for laser fusion

938

Fabrication and Thermal Analysis of Wafer-Level Light-Emitting Diode Packages

939

Fabrication and thermal decay of fiber Bragg gratings in Bi-Al co-doped optical fibers

940

Fabrication and Thermal Features of a Novel Microdevice- A Microchannel Surrounded by a Microsolenoid

941

Fabrication and thermal performance of a novel TRAPATT diode structure

942

Fabrication and thermal performance of a thin flat heat pipe with innovative sintered copper wick structure

943

Fabrication and thermal stability characterisation of Ru electrode used for high power contact radio frequency microelectromechanical system switch

944

Fabrication and thermal stability characterization of Ru electrode used for high power contact RF MEMS switch

945

Fabrication and thermal-chemical stability of magnetoresistive random-access memory cells using α-Fe₂O₃ bottom spin valves

946

Fabrication and thermoelectric characterization of GeSn nanowires

947

Fabrication and thermoelectric properties of NaCo₂O₄ crystal

948

Fabrication and thermophysical properties of short graphite fiber/Cu composites with Mo2C coating by vacuum pressure infiltration

949

Fabrication and total dose testing of a 256 K×1 radiation-hardened SRAM

950

Fabrication and transmission characteristic of PDMS plasma photonic crystal

951

Fabrication and transmission characteristic of PDMS plasma photonic crystal

952

Fabrication and transmission characteristics of couplers using photonic crystal fibers

953

Fabrication and transport AC losses of (Bi,Pb)2223 multifilamentary tapes with resistive barriers

954

Fabrication and transport characteristics of long length Y-123 coated conductors processed by IBAD and PLD

955

Fabrication and transport current properties of directionally solidified Y123 thin fiber

956

Fabrication and transport performance of three-branch junction graphene nanostructure

957

Fabrication and Transport Properties for Cleaved Thin Film BSCCO Single Crystals

958

Fabrication and transport properties of MgB₂ mono-core wire and solenoid coil

959

Fabrication and transport properties of MgB₂/(SUS316/Cu) multifilament wires

960

Fabrication and tuning of the SNS CCL hot model

961

Fabrication and tunneling characteristics of low-leakage All-YBa/sub 2/Cu/sub 3/O/sub 7-x/ edge junctions

962

Fabrication and tunneling measurements of YBa/sub 2/Cu/sub 3/O/sub x//CaF/sub 2//Nb thin film tunnel junctions

963

Fabrication and validation of A2RAM memory cells on SOI and bulk substrates - Withdrawn

964

Fabrication and verification for the micro holographic optical pickup

965

Fabrication and Verification of a Small-Form-Factor Blue-Light Optical Pickup Head With Holographic Optical Element

966

Fabrication and verification of DNA functionalized nanopore with gold layer embedded structure for bio-molecular sensing

967

Fabrication and vibration analysis of micro-cross beams

968

Fabrication And Wafer Level Testing Of Dual Stripe GMR Sensors

969

Fabrication and wafer testing of barber-pole and exchange-biased narrow-track MR sensors

970

Fabrication and wafer-level packaging of Si electrostatic microgripper for micro assembly

971

Fabrication and wavelength adjustment of a WDM gain-coupled DFB laser array with a superlattice trimming layer

972

Fabrication and X-Ray Calibration of Thin Plastic Scintillator Detectors

973

Fabrication and Yield of Large Area Quantum Well Modulators

974

Fabrication and Yield of Large-Area Quantum-Well Modulators

975

Fabrication approach for antiphase narrow linewidth complex coupled 1.55 μm DFB lasers

976

Fabrication approach for lateral InGaAs tunnel transistors

977

Fabrication approaches for metallo-dielectric nanolasers

978

Fabrication as applied to light and medium sized components

979

Fabrication aspects of InP-CAIBE processing for photonic crystal devices

980

Fabrication at wafer level of micromachined gas sensors based on Sno2 nanorods deposited by PECVD and gas sensing characteristics

981

Fabrication Attacks: Zero-Overhead Malicious Modifications Enabling Modern Microprocessor Privilege Escalation

982

Fabrication bipolar plate metal aluminum coated carbon for PEMFC

983

Fabrication by electrodeposition: building 3D structures and polymer actuators

984

Fabrication by LPE and characterization of YBa/sub 2/Cu/sub 3/O/sub 7- delta / thin films on NdGaO/sub 3/ substrates

985

Fabrication by rf-sputtering and diagnostics of Er³⁺/Yb³⁺ - activated silicahafnia waveguides

986

Fabrication Capabilities for Spherical Foam Targets Used in ICF Experiments

987

Fabrication challenges for a complicated micro-flow channel system at low temperature process

988

Fabrication characteristics of 1.2kV SiC JBS diode

989

Fabrication characteristics of 1.2kV SiC junction barrier schottky rectifiers with etched implant junction termination extension

990

Fabrication Colloidal Crystals on the End Face of Optical Fiber as Optical Narrow-Band Filter

991

Fabrication comb-drive device by MEMS and electroplating

992

Fabrication considerations for a coupled-triple resonator crystal

993

Fabrication Cost Analysis and Cost-Aware Design Space Exploration for 3-D ICs

994

Fabrication cost analysis for 2D, 2.5D, and 3D IC designs

995

Fabrication Defects and Fault Models for DNA Self-Assembled Nanoelectronics

996

Fabrication demonstration of 1-1.5 µ NMOS circuits using optical tri-level processing technology

997

Fabrication design and electrical evaluation of bulk-graded filled polymer post insulators

998

Fabrication development for nanowire GHz-counting-rate single-photon detectors

999

Fabrication Error Analysis and Compensation for Guided-Mode Resonance Biosensor

1000

Fabrication error analysis on dual-mass silicon micro-gyroscope